Chill-Pak Super Cold Chill

Chill-Pak
tm
Super Cold
Draught Arms
These draught arms are superior to conventional
draught arms because they Include integrated
aluminum cast cold plates, similar to our Chill-Pak™
Energy cells, to assure maximum efficiency in keeping
beer cold. Glycol flows through the cold plate acting
as a heat exchanger. The design keeps the beer cold
even for the casual pour… first beer, every beer.
Custom draught towers are designed for flush mount
directly on bar top surface. Draught arms are 4” O.D
diameter, with 1” wide mounting flange, and include
faucets (faucet handles not included.)
Minimum 1” internal insulation to prevent loss of
temperature. 4 inch diameter tower with 48 inches of
1/4" stainless beer line, 3/8" stainless glycol line with
3/8" barbed fitting,in patented cold-block for super
cold beer. Fully Insulated.
Top
4”
4.0”
Side
Product Numbers:
Chill-Pak Super Cold Draught Arm-Brushed Stainless
CDAS-1F
SS Cold Draught Arm, 1 Faucet
CDAS-2F
SS Cold Draught Arm, 2 Faucet
CDAS-3F
SS Cold Draught Arm, 3 Faucet
Chill-Pak Super Cold Draught Arm-Mirrored Finish
CDAM-1F
Mirrored Cold Draught Arm, 1 Faucet
CDAM-2F
Mirrored Cold Draught Arm, 2 Faucet
CDAM-3F
Mirrored Cold Draft Arm, 3 Faucet
17”
13”
5.0”
Chill-Pak Super Cold Draught Arm-Brass Finish
CDAB-1F
Brass Cold Draught Arm, 1 Faucet
CDAB-2F
Brass Cold Draught Arm, 2 Faucet
CDAB-3F
Brass Cold Draught Arm, 3 Faucet
Specifications
• 4” diameter brass or stainless steel column
• 3/8 “ Barbed beer fittings
• 1/2” Barbed glycol fittings
• Minimum opening for mounting: 3”
• Maximum opening for mounting: 3.75”
• Weight approximately 15 lbs.
5.0”
Front
Chill-Pak
tm
Division of Kyees Aluminum
15080 Desman Rd. La Mirada, CA 90638
714-670-6394 Fax 714-670-1931
web site: http://www.chill-pak.com
e-mail: sales @ chill-pak.com
© 2000 Chill-Pak—Specifications Subject To Change Without Notice
A
Company