probolt catalogue 2011 artwork.indd

Transcription

probolt catalogue 2011 artwork.indd
1
TITANIUM PA RT S
2
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
WELCOME
to the Pro-Bolt 2011/12 Catalogue
CALIPER PARTS
About us...........................................................................................................................2
Ordering Information ...............................................................................................3
Measuring Assistance & Material Information ..........................................4
Pro-Gauge Measuring Tool ...................................................................................4
Product Profiles ............................................................................................................8
Bleed Nipples ............................................................................................................. 58
Banjo Bolts ................................................................................................................... 59
Caliper Pins .................................................................................................................. 60
POPULAR STRESS AREA KITS
ALUMINIUM PARTS
Front Caliper Component Refurbishment Kits...................................... 62
Race-Spec Radial Caliper Mount Bolt Kits ................................................ 62
Un-Sprung Weight Overhaul Bolt Kits ........................................................ 63
Front & Rear Caliper Mount Bolts Kits ......................................................... 64
Front & Rear Caliper Pinch Bolt Kits .............................................................. 64
Fork Axle Pinch Bolt Kits ...................................................................................... 65
Brake & Clutch Perch Pinch Bolt Kits ............................................................ 66
Handle Bar Bolt Kits ................................................................................................ 66
Top & Bottom Triple Clamp Bolt Kits............................................................ 67
Bolts ................................................................................................................................ 12
Nuts ................................................................................................................................. 14
Washers ........................................................................................................................ 14
Finishing Touches ................................................................................................... 16
METRIC STAINLESS STEEL PARTS
Bolts ................................................................................................................................. 18
Nuts & Washers ......................................................................................................... 20
Rider & Pillion Footrest Hanger Bolt Kits.................................................... 67
Scratch & Spark Sets............................................................................................... 68
TITANIUM PARTS
Bolts ................................................................................................................................ 22
Nuts ................................................................................................................................. 26
Washers ......................................................................................................................... 28
Rods ................................................................................................................................. 29
Subframe Bolt Kits ................................................................................................... 68
MOTORCYCLE SPECIAL PARTS FOR:
Aprilia .............................................................................................................................. 69
BMW ................................................................................................................................ 69
Ducati.............................................................................................................................. 70
Honda ............................................................................................................................. 71
Kawasaki........................................................................................................................ 72
MV Agusta .................................................................................................................... 72
Suzuki.............................................................................................................................. 73
Yamaha .......................................................................................................................... 73
1/4 TURN QUICK RELEASE FASTENERS
Quick Release Fasteners in all Materials..................................................... 30
WORKSHOP KITS, TUBS, BOXES & CABINETS
Aluminium ................................................................................................................... 32
Stainless Steel ............................................................................................................ 34
Titanium ........................................................................................................................ 35
Ancillary Items .......................................................................................................... 74
MOTORCYCLE PARTS
Full Monty Kits .......................................................................................................... 36
Engine Kits .................................................................................................................. 38
Cam Cover Bolts ...................................................................................................... 39
Sump Bolts................................................................................................................... 39
Oil Filler Caps ............................................................................................................. 40
Fairing Kits ................................................................................................................... 41
Quick Release Fairing Kits .................................................................................. 42
Screen Kits.................................................................................................................... 43
Fuel Cap Kits .............................................................................................................. 44
Bar Ends ........................................................................................................................ 45
Top Yoke Nuts ........................................................................................................... 46
Pre-Load Adjusters ................................................................................................ 47
Cable and Dial Adjusters .................................................................................... 48
Reservoir Caps & Reservoir Clips ................................................................... 49
Gear Shift Rods ........................................................................................................ 50
Paddock Stand Bobbins ...................................................................................... 50
Chain Adjuster Blocks .......................................................................................... 51
Chain Adjuster Bolts ............................................................................................. 51
Sprocket Nuts ........................................................................................................... 52
Axle Nuts, Bolts & Swingarm Nuts ............................................................... 54
Disc Rotor Bolts ........................................................................................................ 56
10
20
30
40
50
60
100%
STAINLESS STEEL
UNC Stainless Steel................................................................................................. 76
Parts suitable for Harley Davidson® Motorcycles ..........................78/79
I NDEX
mm
POLISHED
Worldwide Distributors........................................................................................ 80
Display Stands ........................................................................................................... 81
70
80
90
100
110
120
130
140
1
HISTORY
ABOUT US
Established in 1999, Pro-Bolt is a family business based in the Cotswolds,
England. We are the world-leading supplier of quality fasteners,
motorcycle accessories, cycle parts and other components.
We have a large range of products manufactured in the best materials
available. This, incorporated with unique design and easy fitment of kits,
provides an unbeatable combination.
Our roots derive from all corners of the motorcycle industry, supplying
products to customise, personalise, enhance looks and performance
– offering an excellent alternative to lost, rusty or simply heavy bolts.
From Streetfighters to Race Bikes, Enduro, Trail or Scooters, you’ll find
our brochure packed with imaginative, exciting and sexy products to
improve your machine.
We supply Aluminium, Stainless Steel and Titanium, all offering their own
strengths and benefits and each suitable for different applications.
Aluminium and Titanium products suit any market where looks and
weight are crucial to ensure success. As the world’s largest stockist of
top quality Titanium fasteners, our product is in strong demand by Race
Teams – British Superbikes Teams, World Superbike Teams and Moto
GP Teams all use Pro-Bolt. This reliability of both service and product is
proven on the track to serve you well on the road.
Our range of Stainless Steel fasteners has proven a great success with
products continually developing and growing. The unique design of the
heads and quality of thread and finish is unparalleled. Each product is
polished to a mirror finish.
Pro-Bolt produce a separate
catalogue containing many
specialist products for the Cycle
Market and Off-Road Bikes. These
are available on request and can
also be downloaded on-line via
www.pro-bolt.com.
Our expertise in polishing has
opened up the market for
cruisers which has traditionally
been the domain of Chrome.
Unfortunately, Chrome is
only a coating and as such is prone
to chipping, peeling and flaking even at
the point of fitment. Unlike Chrome, our highly
polished Stainless Steel offers strength along with an
exceptional finish. Our new range of UNC bolts are available
in unique head designs with rolled threads for added strength.
We also now offer aftermarket model specific bolt kits suitable for
Harley-Davidson® Motorcyles. Our fasteners exceed D.O.D, M.O.T and
factory standards.
As with any successful company our biggest strength is our staff and our
dedicated team of enthusiasts is on hand to provide you with the very
best technical support.
We specialise in offering many ‘specific kits’ thus our motto:
Having such an extensive range of fasteners in the most attractive
materials means our products are distributed and used worldwide in
many diverse industries. We supply fasteners for Motorcycles, Formula 3,
Quad Bikes, Kart Kits, Cycle Sets, ATV’s, Powerboats, Model Making,
Yachting, Wheelchairs, Furniture and for many Marine applications.
2
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
ORDERING INFORMATION
CONTACT INFORMATION
Office hours: Monday-Thursday 9.00 - 5.30 Friday 8.00 - 4.00
(Answerphone out of hours)
Telephone: +44 (0) 1684 851940
Fax: +44 (0) 1684 850080
E-mail: [email protected]
Web: www.pro-bolt.com
Post: Pro-Bolt Ltd, Unit F, 6400 Severn Drive,
Tewkesbury Business Park, Tewkesbury, Glos GL20 8SF, UK.
SHORTAGES/DAMAGED GOODS
Missing parts or damaged goods must be advised within 48 hours of
receipt. Please retain evidence of damaged packaging.
DISCONTINUED PRODUCTS
We may at any time discontinue products as we see fit.
RETURNS
To return a product, please contact us for a Returns Reference Number
within 28 days of purchase. No goods will be accepted without a
Returns Reference. Returned goods, supplied correctly, will be subject
to a 10% restocking charge. Our freepost address is: Returns, Pro-Bolt
Ltd, FREEPOST SWC4834, Severn Drive, Tewkesbury Business Park,
Tewkesbury, Glos. GL20 8SF, UK.
ORDERING
Visit one of our UK Stockists: See the quality of our products
first hand. Phone for information or see our ‘dealer’ page
via www.pro-bolt.com
Phone, fax or post: See above contact information
On-line: www.pro-bolt.com
•
•
•
ACU DISCOUNTS
Pro-Bolt offer registered ACU racers a 10% discount throughout our
range. When ordering, please have your registration details to hand.
ON-LINE
During UK office hours our on-line support feature is available. This
live feature enables us to answer questions, confirm stock availability,
provide advice and assist with navigating our website.
If you are part of social networking, be the first to
find out about our latest products and events by
becoming a fan on Facebook. You can also find
out about our products on YouTube. Our range is
constantly evolving with new products which are
regularly added to our website and broadcast on Facebook.
UK STOCKIST & DEALERS
Pro-Bolt has a network of Stockists who hold a wide range of our
products - they will also order in specific kits and accessories for you.
A list of Stockists can be found on our website. In addition we have
a large number of registered Dealers who also supply and fit our
products – from Tuning Shops and Engineering Companies to High
Street Shops. Only registered businesses that re-sell products qualify for
discounts. If you are interested in becoming a Stockist or Dealer, please
contact [email protected].
GLOBAL WEBSITES
Pro-Bolt has global websites based in several countries around the
world, offering local sales support and advice using local language and
currency. Please see our main website for details.
OVERSEAS DISTRIBUTORS
Pro-Bolt has a worldwide network of Distributors – please see page 80
for details. Our website www.pro-bolt.com lists the most up to-date
information. If you are interested in becoming a Distributor of our
products, please contact [email protected].
DELIVERY OPTIONS
We aim to deliver from stock in 1-2 days, but please allow 3 days before
progressing your order. Delivery Options available are:
1st Class Post: Deliveries requested 1st Class Post are not traceable
and Pro-Bolt is not responsible for lost in transit or non-delivery.
Royal Mail Signed for: Signed Proof of Delivery is available once
delivered, but this is non-traceable
Courier: Fully traceable courier service
Guaranteed Next Day: Deliveries before 9.30am and/or 1pm are
available depending on delivery address
TRADEMARKS
ApriliaTM, BMW TM, BremboTM, CagivaTM, DucatiTM, Harley-Davidson®,
KawasakiTM, MV AgustaTM, NissinTM, SumitomoTM, SuzukiTM, TokicoTM,
TriumphTM, YamahaTM are registered trademarks, here used only as
a reference.
•
•
•
•
PRO-BOLT COPYRIGHT
Pro-Bolt is a registered trade mark. Photography and the information
present in this catalogue are the property of Pro-Bolt. All rights
are reserved.
ORDERING INFO
PRICE LISTS & FITMENT GUIDES
This catalogue is supplied with a separate Price List giving prices for
individual bolts, packs, boxes and kits. Due to volatile material prices,
Pro-Bolt reserves the right to change prices and discontinue products
without notice. All retail prices in our Price List include VAT and are in
Pounds Sterling. VAT will not be charged to retail customers outside of
the EU. VAT will not be charged to registered business outside the EU,
or in the EU if a valid VAT number is provided on placement of order.
Where you see this symbol you should refer to our model
specific fitment guide, as this is a product we measure & check.
PAYMENT METHODS
Credit or Debit Cards: Please have your card ready. We accept
MasterCard, Visa, Delta, Solo, Maestro and American Express.
Cheques: Payable to ‘Pro-Bolt’. Please allow 7 working days from receipt
of cheque to allow clearance.
Money Orders / Bank Drafts: On receipt of a Pro-Bolt pro-forma invoice,
please send payable to ‘Pro-Bolt’ quoting your order number.
PayPal: We can accept payment by PayPal – please ring for details.
Bank Transfers: Pro-Bolt are able to offer pricing in Pounds Sterling,
Euros or US Dollars – please contact us for relevant information.
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
3
MAT ERIAL IN FO
MEASURING ASSISTANCE AND
MATERIAL INFORMATION
ORDERING INDIVIDUAL BOLTS
All fasteners are available individually in any quantity. When ordering
we offer the following advice and general information to assist. Our
individual bolt part numbers detail the actual product as follows in this
sequence.
• Material
Aluminium, Stainless Steel or Titanium.
• Head Style
Flanged Hex Head, Tapered Socket Cap, Countersunk etc.
• Shank Diameter
M8 (8mm), M10 (10 mm), etc.
• Shank Length
Measured from beneath the head (with the exception of
countersunk bolts - where length includes the head).
• Thread Pitch (if other than standard)
The distance from the crest of one thread to the next.
• The Colour Finish (if available/required)
Aluminium: Black, Blue, Gold, Gunmetal Grey, Orange,
Purple, Red & Silver
Stainless Steel: Polished Finish
Titanium: Natural Finish, Blue, Gold & Purple Haze.
• Quantity Required
• Part Numbers
TIHX835G
Titanium Flanged Hex Head, M8 Thread Diameter x
35mm length under the head in gold.
LSSCS625
Stainless Steel Countersunk Bolt, M6 Thread Diameter
x 25mm long.
PRO GAUGE MEASURING TOOL – A USEFUL AID
Take the guesswork out of measuring Metric bolts. We offer a
Pro-Gauge to make measuring easier, you’ll find it an essential tool
box item.
• Teeth for Gauging Thread Pitch
0.7mm – 1.75mm teeth to match to your original bolts.
• Holes to Gauge Thread Diameter
M4 to M12. The smallest hole which the bolt will fit through
cleanly, without screwing it through, gives the thread diameter.
• To Measure Length of Bolt
Place the under head of bolt to the edge of the tool to obtain the
length of your original bolts (with the exception of countersunk
bolts where the length should include the head).
GENERAL THREAD INFORMATION
Shorter bolts of 25mm or less will usually be fully threaded, whilst
longer bolts usually have a grip length and 25mm of thread. The
thread pitch of a standard metric screw corresponds to the bolt
diameter. It is the distance from one peak of the thread to the next. A
metric screw thread is specified by how far in millimetres it advances
in one turn of the screw. For example, if one turn brings it 1mm closer,
then it is a 1mm pitch. These are the industry standard thread pitches:
Diameter
M3
M4
M5
M6
M8 M10 M10 M12 M12
fine
fine
Pitch (mm)
0.5
0.7
0.8
1.00 1.25 1.50 1.25
1.75
1.50
BOLT CONFIGURATION
Head
The head is designed to provide a wrenching surface to tighten
the bolt to the correct preload. Its size of bearing area depends on
the stress level and the hardness of the material being fastened.
There must be enough bearing surface to prevent indentation of
the material under preload. To minimise the effects of fatigue, a bolt
should be tightened or preloaded to an initial clamping load in excess
of the maximum working load of the joint.
Fillet
This area of structural discontinuity is a critical point of stress
concentration. The radius where head and shank meet must be
smooth and free from flaws. It should be as large as practical and still
provide the necessary bearing area under the head.
Grip Length
Minimum grip length from protruding head bolts shall not be less than
the head-to-shank fillet radius.
Shank
The shank must be fully concentric with the thread and with the head.
To reduce bending moments, the angle between head and shank
axis must be kept to a minimum. The fit between bolt shank and
mating hole must be kept to a very close tolerance to maximise shear
strength.
Thread & Pitch
The two most critical thread factors for high strength/high fatigue
rating are a generous root radius to minimise notch effect and
compressive pressurising achieved by rolling threads after heat
treatment. The pitch diameters must also be closely controlled for high
fatigue applications. Where lock nuts will be used, thread point chamfer
must be kept to a minimum. Where thread run-out flares into the
shank, there should be no abrupt changes in the cross sectional area.
Shank
Diameter
Thread Length
s a l e s 0044 (0) 1684 851940
1.25
For fasteners where the head usually sits above the surface, the
measurement is taken from directly under the head to the end of
the fastener. For fasteners that are designed to be countersunk, the
measurement is made from the flat of the head (where the surface
of the material is), to the end of the fastener.
Overall Length
4
M12 x
fine
www.pro-bolt.com
Fillet
Grip Length
Head
Height
ALUMINIUM
A l u m i n i um
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
To customise your machine, we offer a wide range of fasteners
and accessories. This ever increasing range allows you to create
a unique look and style. You can customise your machine little
by little, or make large-scale changes; either way you will be
guaranteed colour consistent parts throughout that are machined
to a high quality smooth finish. We offer model specific kits for
Motorcycles, Cycle Sets and Rocker Cover Kits. Our lightweight
bolt kits are available for a huge number of bikes, enabling you to
change Engine Casing Bolts, Fairing Bolts, Screen Bolts and Fuel
Cap Surround Bolts with no need to measure your originals - we’ve
done it for you! Whichever bike you ride you are sure to find
goodies that are fun, functional and make your bike unique and
stand out from the crowd. All our kits and accessories are available
in a choice of Black, Blue, Gold, Gunmetal Grey, Orange, Purple,
Red and Silver.
MATERIAL PROPERTIES
Density: ......................................................................................2730 kg/m3 (170lb/ft3)
Young’s Modulus: ................................................................... 72GPa (10.4 x 106psi)
Yield Strength: ........................................................................505MPa (73.2 x 103psi)
Ultimate Tensile Strength: ...............................................570MPa (82.7 x 103psi)
Compressive Strength: ......................................................505MPa (73.2 x 103psi)
Shear Modulus: .......................................................................27GPa (3.92 x 106psi)
Shear Strength:..................................................................... 330MPa (47.9 x 103psi)
Ductility: ...............................................................................10% elongation at break
Poisson’s Ratio: ............................................................................................................... 0.33
Hardness: .............................................................................................................150 Brinell
Strength-to-Weight Ratio: ..................................................................... 185 kNm/kg
Stiffness-to-Weight Ratio: .................................................................. 26.4 MNm/kg
•
•
•
•
•
•
•
•
•
•
•
•
• Manufacturing process: Head: cold formed; Shank: thread rolled.
• Anodising: Chemically brightened and colour anodised to
between 8 and 12 microns thick.
• Weight: 60% lighter than steel – 40% lighter than Titanium.
• Corrosion: Saltwater, road film or mild acids do not affect
anodised aluminium.
• Application: Aluminium is suitable for use in all non-safety
critical areas – mudguards, screens, fairings, engine casings,
huggers, fuel caps, number plates, lamp units, exhaust cans, heel
plates, exhaust manifold brackets, fuel cap surround, air filter,
car rocker covers, plus many more. Aluminium is not suitable
for any stress area applications. If you are in any doubt as to
the suitability of our products for your machine, or the size you
need, please contact Pro-Bolt direct.
Thread
Diameter
Material Tensile
Stress Area (mm2)
Max Load
(kN)
Total Elongation
(mm)
6mm
20.1
11.58
0.56
8mm
36.6
23.19
0.62
10mm
58.0
39.17
1.05
Torque & Lubrication: Where we offer model specific replacement
Bolt Kits, Aluminium is a softer and weaker alternative to the original
bolts being replaced, so a lower torque is required to prevent damage
to your Pro-Bolt fastener.
Where individual bolts are purchased, torque guides vary depending
on the material, manufacturing method, thread diameter, pitch and
head style. This torque information can be supplied
on request, or downloaded via www.pro-bolt.com in
a separate document entitled ‘Material Information’
wherever you see the icon shown here.
For general use fasteners we recommend an anti-seize or a copper
based lubricant be applied to the threads in order to prevent seizing.
If you are in any doubt as to the suitability, torque settings of our
products for your specific application, please do not hesitate to
contact us prior to fitment.
MATERI AL I NFO
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
5
MATERIAL I N F O
STAINLESS STEEL
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
Fit & Forget! Manufactured from 316 Stainless Steel, which is superior in
strength and corrosion resistance, we are proud to offer an exceptional
quality product. Pro-Bolt is the first to provide Tapered Socket Caps,
Flanged Hex Heads and Domed/Mushroom Fairing Bolts. We are
offering a quality grade material in unique head styles – and to a
polished mirror finish. Absolutely no polishing is required. Forget rough
nuts and take a close look at our buffed nuts! No stamp marks in the
bolt heads or cracked and grainy finishes. No matter how many dark
winter nights you spend polishing mass-produced lesser quality bolts,
you will never achieve the quality of finish and material we offer. Please
be aware that not all Stainless Steel is suitable for stress areas. However,
our 316 Stainless Steel is suitable for Engine Casings, Fairings, Screens,
Front Axle Pinch Bolts, Caliper Pinch Bolts, Caliper Mount Bolts, Footrest
Hanger Bolts, Clip-On Handle Bar Bolts, Brake/ Clutch Pinch Perch Bolts,
Top/Bottom Yoke Clamp Bolts. Also available are 1/4 Turn D-Ring Quick
Release Fasteners, 1/4 Turn Allen Key Drive Quick Release Fasteners,
Brake Caliper Pad Pins, Axle Nuts, Banjo Bolts, Bleed Nipples and
Motorcycle Disc Rotor Bolts.
•
•
•
•
•
6
MATERIAL PROPERTIES
Density: ...................................................................................... 8030 kg/m3 (501lb/ft3)
Young’s Modulus:.......................................................................193GPa (28 x 106psi)
Yield Strength: ........................................................................ 260MPa (37.7 x 103psi)
Ultimate Tensile Strength: ............................................... 570MPa (82.7 x 103psi)
Compressive Strength: ...................................................... 260MPa (37.7 x 103psi)
Shear Modulus: .........................................................................78GPa (11.3 x 106psi)
Ductility: .......................................................................... 40% elongation at break +
Minimum value allowed by ...................................................................ASTM A240
Poisson’s Ratio: ................................................................................................................0.27
Hardness: .................................................................................................95 Rockwell B +
Maximum value allowed by ..................................................................ASTM A240
Strength-to-Weight Ratio: ..................................................................... 32.4kNm/kg
Stiffness-to-Weight Ratio: ...................................................................... 24 M Nm/kg
•
•
•
•
•
•
•
•
•
•
•
•
•
Material specification – 316.
Manufacturing process: We manufacture in a single process on multi
axis CNC machining centres, which includes thread rolling. Thread
standards are to BS3692:1967 which is the British Standard for ISO
Precision Metric Threads. Route radii vary between 0.8mm and 0.4mm.
This is the maximum that we can use and improves shear strength.
Thread lead varies between K1 and K2.
The head and shank are Pro-Bolt’s own designs, which have been
successfully tested in the field for the last four years.
Thread
Diameter
Material Tensile
Stress Area (mm2)
Max Load
(kN)
Total Elongation
(mm)
6mm
20.1
16.40
1.93
8mm
36.6
29.15
2.85
10mm
58.0
46.89
3.70
Torque & Lubrication: Where we offer model specific replacement
Bolt Kits please, use your manufacturer’s recommended torque
settings. Disc Rotor Bolts are the only exception and have a lower
setting which we specify in the product packaging.
Stainless Steels are iron alloys with a minimum of 10.5% Chromium
with other elements (Nickel, Molybdenum, Titanium, Copper, Carbon,
Nitrogen) added to enhance properties such as formability and
strength. It is the chromium-rich, oxide film that gives the corrosion
resistance of Stainless Steel. This protective film is strong and
chemically stable (i.e. passive) where there is sufficient oxygen on the
surface. This protection is extremely thin and will usually self-repair if
sufficient oxygen is available. Please note: Under certain conditions
the passive state can be broken down and corrosion can result.
Where individual bolts are purchased, torque guides vary depending
on the material, manufacturing method, thread diameter, pitch and
head style. This torque information can be supplied
on request, or downloaded via www.pro-bolt.com in
a separate document entitled ‘Material Information’
wherever you see the icon shown here.
Heat Resistance: 316 has good resistance to oxidation in continuous
service to 870oC and intermittent service to 925oC. However, continuous
use at 425-860oC is not recommended due to its resistance to carbide
precipitation. Where high strength is required at temperatures above
500oC, Grade 316H is recommended.
For general use fasteners, we recommend an anti-seize or a copper
based lubricant be applied to the threads in order to prevent galling,
the exception being bleed nipples and banjo bolts which should be
fitted dry. For bolts in safety critical areas, we recommend a medium
strength threadlock.
Alloy Designations: Stainless Steel 316 corresponds to the following
standard designations and specifications:
If you are in any doubt as to the suitability, torque settings of our
products for your specific application, please do not hesitate to
contact us prior to fitment.
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
TITANIUM
T i t a n i um
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Made from aircraft grade Titanium 6AL-4V (grade 5), the outstanding
benefits are that we roll the threads to produce greater fatigue
strength and reduce galling. These bolts are in excess of 120,000psi
ultimate tensile strength, suitable to replace both Grade 5 and Grade
8 steel bolts. We carry the UK’s widest range of products for the
automotive industry. We offer Flanged Hex Head, Tapered Socket Cap,
Countersunk, and Dome Head Bolts, Nuts and Washers – from 3mm
to 12mm. We also offer Axle Nuts, Swingarm Nuts, Yoke Nuts, Caliper
Pins, Banjo Bolts, Disc Bolts and many more specifically machined
items. For motorcyclists we have made it so easy to replace bolts
in stress areas by doing all the measuring for you, and offering the
relevant fasteners in kit form. All our Titanium nuts, bolts, washers
and specially machined items are available in natural, blue, gold and
purple haze, with the exception of our Race-Spec range which has a
factory finish.
Torque & Lubrication: Where we offer model specific replacement
Bolt Kits please, use your manufacturer’s recommended torque
settings. Disc Rotor Bolts are the only exception and have a lower
setting which we specify in the product packaging.
Ti-6Al-4V, an alloy introduced in 1954, is a good general purpose
grade. Titanium alloy is available in all product forms. Its density
is 0.160 pounds per cubic inch. It can be heat-treated to ultimate
strengths in excess of 170,000psi and responds to heat treatment
in sections up to 15mm. This alloy is stable at temperatures ranging
from 423oF to over 1000oF.
Where individual bolts are purchased, torque guides vary depending
on the material, manufacturing method, thread diameter, pitch and
head style. This torque information can be supplied
on request, or downloaded via www.pro-bolt.com in
a separate document entitled ‘Material Information’
wherever you see the icon shown here.
Manufacturing process: We manufacture in a single process on
multi axis CNC machining centres, which includes thread rolling.
Thread standards are to BS3692:1967 which is the British Standard
for ISO Precision Metric Threads. Route radii vary between 0.8mm
and 0.4mm. This is the maximum that we can use and improves
shear strength. Thread lead varies between K1 and K2.
For general use fasteners, we recommend an anti-seize or a copper
based lubricant be applied to the threads in order to prevent galling,
the exception being bleed nipples and banjo bolts which should be
fitted dry. For bolts in safety critical areas, we recommend a medium
strength threadlock.
•
•
•
•
Thread
Diameter
Material Tensile
Stress Area (mm2)
Max Load
(kN)
Total Elongation
(mm)
6mm
20.1
21.25
0.54
8mm
36.6
36.78
0.48
10mm
58.0
53.53
1.45
If you are in any doubt as to the suitability, torque settings of our
products for your specific application, please do not hesitate to
contact us prior to fitment.
Other Items: Machined from bar.
Weight: 42% lighter than steel.
MATERIAL PROPERTIES
Material Information
Density: ......................................................................................4420 kg/m3 (276lb/ft3)
Young’s Modulus:...................................................................... 110GPa (16 x 106psi)
Yield Strength: ....................................................................... 828 MPa (120 x 103psi)
Ultimate Tensile Strength: .............................................1030MPa (149 x 103psi)
Compressive Strength: .......................................................960MPa (139 x 103psi)
Shear Modulus: ........................................................................ 43GPa (6.24 x 106psi)
Ductility: ...............................................................................10% elongation at break
Poisson’s Ratio: ............................................................................................................... 0.34
Hardness: .....................................................................................................36 Rockwell C
Maximum value allowed by ................................................................. ASTM A240
Strength-to-Weight Ratio ........................................................................187kNm/kg
Stiffness-to-Weight Ratio ......................................................................24.9MNm/kg
mm
10
20
30
40
50
60
70
MATERI AL I NFO
•
•
•
•
•
•
•
•
•
•
•
•
80
90
100
110
120
130
140
7
PRODUCT P R O F I L E S
Note: Not all sizes are available in ALL materials,
please refer to relevant material section.
Standard Allen Key Socket Cap Bolts
M3 (0.5)
M4 (0.7)
M6 (1.00)
M8 (1.25)
M5 (0.8)
Tapered Socket Cap Bolts
M4 (0.7)
M5 (0.8)
M7 (1.00)
M6 (1.00)
M8 (1.25)
M10 (1.50) also available in fine (1.25) pitch
45 50 55 60 65 70 75 80
8
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
Flanged Hex Head Bolts
M12 (1.25)
M4 (0.7)
M5 (0.8)
M6 (1.00)
M8 (1.25)
M10 (1.50)
• also available in fine (1.25) pitch
• longer lengths available in fine (1.25) pitch
Countersunk Bolts
M4 (0.7)
M6 (1.00)
M5 (0.8)
M8 (1.25 )
PRODUCT PROFI LES
Dome Head/Fairing Bolts
mm
10
20
M5 (0.8)
M6 (1.00)
18 mm
16 mm
M8 (1.25)
16 mm
M6 (1.00)
M5 (0.8)
12 mm
16 mm
12 mm
8 mm
M4 (0.5/0.7)
30
40
50
60
70
80
90
100
M10 (1.25)
110
120
130
140
9
P R ODUC T P R O FIL E S
Note: Not all sizes are available in ALL materials,
please refer to relevant material section.
Flat Washers
M3
10 mm
9 mm
7 mm
M6
M5
M5
M4
M6
15 mm
M6
M8
20 mm
M6
M6
M8
20 mm
M12
30 mm
M10
M8
16 mm
M6
25 mm
20 mm
18 mm
15 mm
12 mm
M5
20 mm
30 mm
M14
M16
30 mm
28 mm
24 mm
Drilled Washers
M6
M5
10 mm
M6
M10
M8
12 mm
23 mm
M12
25 mm
20 mm
16 mm
Countersunk Bodywork Washers
M6
M5
13 mm
10
M8
M6
19 mm
s a l e s 0044 (0) 1684 851940
22 mm
www.pro-bolt.com
25 mm
Race Spec Bolts
12
10 mm
M5 (0.80)
10 15 20 25
16
14 18 22 28
11 mm
M6 (1.00)
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90
12
32
11 mm
M7 (1.00)
40
20
50
60
80
28
15 mm
M8 (1.25)
15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90
32
17 mm
M10 (1.25)
20 25 30 35 40 45 50 55 60 65 70 75 80
90
C
12 mm
D
Break Edge
45o x 0.5
M5 (0.80)
16
16 mm
M6 (1.00)
12 16 20 25 30
16 mm
M8 (1.25)
25
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
11
PRODUCT PROFILES
Race Spec Bodywork Bolts
ALUMINIU M PA RT S
Avai l abl e i ndi vi dual l y or i n pac ks of 5/10
BOLTS
Standard Allen Key Socket Cap Bolts
M3 Thread Diameter (2mm Allen Key)
Length measurements are
taken from below the head
Part Number
Thread & Pitch
Length
LPB308
M3 x 0.5mm
8mm
LPB310
M3 x 0.5mm
10mm
LPB330
M3 x 0.5mm
30mm
M4 Thread Diameter (3mm Allen Key)
Length measurements are
taken from below the head
Part Number
Thread & Pitch
Length
LPB410
M4 x 0.7mm
10mm
LPB420
M4 x 0.7mm
20mm
LPB435
M4 x 0.7mm
35mm
M5 Thread Diameter (4mm Allen Key)
Length measurements are
taken from below the head
Part Number
Thread & Pitch
Length
LPB508
M5 x 0.8mm
8mm
LPB510
M5 x 0.8mm
10mm
LPB512
M5 x 0.8mm
12mm
LPB516
M5 x 0.8mm
16mm
LPB520
M5 x 0.8mm
20mm
LPB525
M5 x 0.8mm
25mm
LPB530
M5 x 0.8mm
30mm
LPB540
M5 x 0.8mm
40mm
LPB545
M5 x 0.8mm
45mm
M6 Thread Diameter (5mm Allen Key)
Length measurements are
taken from below the head
Part Number
Thread & Pitch
Length
LPB610
M6 x 1.00mm
10mm
LPB612
M6 x 1.00mm
12mm
LPB616
M6 x 1.00mm
16mm
LPB620
M6 x 1.00mm
20mm
LPB625
M6 x 1.00mm
25mm
LPB630
M6 x 1.00mm
30mm
LPB635
M6 x 1.00mm
35mm
LPB640
M6 x 1.00mm
40mm
LPB645
M6 x 1.00mm
45mm
LPB650
M6 x 1.00mm
50mm
LPB655
M6 x 1.00mm
55mm
LPB660
M6 x 1.00mm
60mm
LPB665
M6 x 1.00mm
65mm
LPB670
M6 x 1.00mm
70mm
LPB675
M6 x 1.00mm
75mm
LPB680
M6 x 1.00mm
80mm
LPB685
M6 x 1.00mm
85mm
LPB690
M6 x 1.00mm
90mm
LPB695
M6 x 1.00mm
95mm
LPB6100
M6 x 1.00mm
100mm
12
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
M8 Thread Diameter (6mm Allen Key)
Part Number
Thread & Pitch
Length
LPB812
M8 x 1.25mm
12mm
LPB820
M8 x 1.25mm
20mm
LPB825
M8 x 1.25mm
25mm
LPB830
M8 x 1.25mm
30mm
LPB835
M8 x 1.25mm
35mm
LPB840
M8 x 1.25mm
40mm
LPB860
M8 x 1.25mm
60mm
Countersunk Bolts
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Length measurements include the head
Part Number
Thread & Pitch
Length
Allen Key Size
LCS415
M4 x 0.7mm
15mm
2.5
LCS420
M4 x 0.7mm
20mm
2.5
LCS445
M4 x 0.7mm
45mm
2.5
LCS450
M4 x 0.7mm
50mm
2.5
LCS520
M5 x 0.8mm
20mm
3
LCS530
M5 x 0.8mm
30mm
3
LCS535
M5 x 0.8mm
35mm
3
LCS615
M6 x 1.00mm
15mm
4
LCS625
M6 x 1.00mm
25mm
4
LCS635
M6 x 1.0mm
35mm
4
LCS820
M8 x 1.25mm
20mm
6
LCS840
M8 x 1.25mm
40mm
6
Length measurements are
taken from below the head
Dome Head/Fairing Bolts
Thread & Pitch
Length
Allen Key Size
LFB412F
M4 x 0.5mm (12mm head)
12mm
2.5
LFB412
M4 x 0.7mm (12mm head)
12mm
2.5
LFB425
M4 x 0.7mm (12mm head)
25mm
2.5
LFB512
M5 x 0.8mm (12mm head)
12mm
3
LFB516
M5 x 0.8mm (12mm head)
16mm
3
LFB516XL
M5 x 0.8mm (16mm head)
16mm
3
LFB525
M5 x 0.8mm (12mm head)
25mm
3
LFB610
M6 x 1.00mm (16mm head) 10mm
4
LFB616
M6 x 1.00mm (16mm head) 16mm
4
LFB620
M6 x 1.00mm (16mm head) 20mm
4
LFB620XS
M6 x 1.00mm (12mm head) 20mm
4
LFB625
M6 x 1.00mm (16mm head) 25mm
4
LFB630
M6 x 1.00mm (16mm head) 30mm
4
LFB630XS
M6 x 1.00mm (12mm head) 30mm
4
LFB635
M6 x 1.00mm (16mm head) 35mm
4
LFB640
M6 x 1.00mm (16mm head) 40mm
4
LFB825
M8 x 1.00mm (16mm head) 25mm
4
LFB840
M8 x 1.00mm (16mm head) 40mm
4
Honda Special Fuel Cap Bolts
Length measurements are
taken from below the head
Part Number
Thread & Pitch
Length
LH465
M4 x 0.7mm (10mm head diameter)
6.5mm
LH420
M4 x 0.7mm (10mm head diameter)
20mm
10
20
30
40
ALUM I NIUM
Part Number
mm
A l u m i n i um
Length measurements are
taken from below the head
50
60
70
80
90
100
110
120
130
140
13
ALUMINIU M PA RT S
NUTS
Full Nuts
Part Number
Thread & Pitch
LFN5
M5 x 0.8mm
LFN6
M6 x 1.00mm
LFN6LH (Left Hand Thread) M6 x 1.00mm
LFN8
M8 x 1.25mm
Socket Size
8mm
10mm
10mm
13mm
Nyloc Nuts
Part Number
LNYN4
LNYN5
LNYN6
LNYN8
Thread & Pitch
M4 x 0.7mm
M5 x 0.8mm
M6 x 1.00mm
M8 x 1.25mm
Socket Size
7mm
8mm
10mm
13mm
Dome Nuts
Part Number
LDOMENUT4
LDOMENUT5
LDOMENUT6
LDOMENUT8
LDOMENUT10F
LDOMENUT10
Thread & Pitch
M4 x 0.7mm
M5 x 0.8mm
M6 x 1.00mm
M8 x 1.25mm
M10 x 1.25mm
M10 x 1.50mm
Socket Size
7mm
8mm
10mm
13mm
17mm
17mm
Height
8mm
10mm
12mm
15mm
18mm
18mm
WASHERS
Flat Washers
Part Number
Inside
Diameter
Outside
Diameter
Thickness
LWA3
LWA4
LWA5
LWA6
LWA6-18
LWA8
LWA8-20
LWA10
M3
M4
M5
M6
M6
M8
M8
M10
7mm o/d
9mm o/d
10mm o/d
12mm o/d
18mm o/d
16mm o/d
20mm o/d
20mm o/d
0.55mm
0.80mm
0.90mm
1.40mm
1.40mm
1.50mm
1.60mm
1.77mm
Drilled Washers
Part Number
Inside
Diameter
Outside
Diameter
Thickness
LWAD5
LWAD6
LWAD6-23
LWAD8
LWAD10
LWAD12
M5
M6
M6
M8
M10
M12
10mm
12mm
23mm
16mm
20mm
25mm
1.30mm
1.50mm
1.50mm
1.90mm
2.80mm
3.40mm
Countersunk Bodywork Washers
Part Number
Inside
Diameter
Outside
Diameter
Thickness
LWAC5
LWAC6-19
LWAC6-22
LWAC8
M5
M6
M6
M8
13mm o/d
19mm o/d
22mm o/d
25mm o/d
3.20mm
3.40mm
3.40mm
5.00mm
Manufactured to be fitted with a
6mm standard socket cap bolt
Flared Washers
Part Number
Inside
Diameter
Outside
Diameter
Thickness
LWAPB625
M6
25mm o/d
7.00mm
14
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
RACE-SPEC BOLTS
A l u m i n i um
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Race-Spec Hex Head Bolts
New Bolt Range in 7075 Aluminium machined with Rolled
Threads for superior strength. Our Race Spec bolts are
widely used by Racers, enthusiasts and those who like
attention to detail. The heads are pre-drilled on the flats
for ease of lockwiring and etched with the Pro-Bolt name.
Our Aluminium Race Spec Bolts represent an outstanding
62% weight saving over equivalent sized steel bolts.
Part
Number
LHX510R
LHX520R
LHX620RE
LHX625RE
LHX630RE
LHX635RE
LHX640RE
LHX645RE
LHX650RE
LHX655RE
LHX660RE
LHX665RE
LHX670RE
LHX675RE
LHX680RE
LHX685RE
LHX690RE
LHX820RE
LHX825RE
LHX830RE
LHX835RE
LHX840RE
LHX845RE
LHX1025RE
LHX1030FRE
LHX1040FRE
LHX1060FRE
Thread/
Pitch
M5 x 0.8mm
M5 x 0.8mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M8 x 1.25mm
M8 x 1.25mm
M8 x 1.25mm
M8 x 1.25mm
M8 x 1.25mm
M8 x 1.25mm
M10 x 1.25mm
M10 x 1.25mm
M10 x 1.25mm
M10 x 1.25mm
Thread
Length
10mm
20mm
20mm
25mm
30mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
25mm
20mm
25mm
30mm
25mm
25mm
25mm
25mm
30mm
25mm
25mm
Length
10mm
20mm
20mm
25mm
30mm
35mm
40mm
45mm
50mm
55mm
60mm
65mm
70mm
75mm
80mm
85mm
90mm
20mm
25mm
30mm
35mm
40mm
45mm
25mm
30mm
40mm
60mm
Flange
Diameter
10mm
10mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
12mm
15mm
15mm
15mm
15mm
15mm
15mm
17mm
17mm
17mm
17mm
Socket
Size
6mm
6mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
8mm
10mm
10mm
10mm
10mm
10mm
10mm
12mm
12mm
12mm
12mm
Race-Spec Body Bolts
Part
Number
LBWHX516R
LBWHX612R
LBWHX616R
LBWHX620R
LBWHX625R
LBWHX630R
LBWHX825R
mm
10
Thread/
Pitch
M5 x 0.8mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M6 x 1.00mm
M8 x 1.25mm
20
Thread
Length
16mm
12mm
16mm
20mm
25mm
30mm
25mm
Length
16mm
12mm
16mm
20mm
25mm
30mm
25mm
30
40
50
Flange
Diameter
16mm
16mm
16mm
16mm
16mm
16mm
16mm
60
ALUM INI UM
New Bodywork Bolt Range in 7075 Aluminium machined
with Rolled Threads for superior strength. These bolts
are perfect for plastics/bodywork where the large
diameter will prevent bolts 'pulling through' bodywork.
The external hex drive on the head offers enhanced
strength. The heads are pre-drilled on the flats for ease
of lockwiring. Our Aluminium Race Spec Bolts represent
an outstanding 62% weight saving over equivalent sized
steel bolts.
Socket
Size
6mm
8mm
8mm
8mm
8mm
8mm
10mm
70
80
90
100
110
120
130
140
15
FINISHING T O U C H E S
Button Inserts
Push-in button inserts are ideal for covering stress
areas and non stress bolts, keeping out the dirt or
for an effective colour contrast. Push-in buttons fit
into the head of a standard allen key socket cap
bolt and are held in place with a rubber 'O' ring.
When ordering, please note sizes are taken from
the thread diameter of the corresponding bolt
– NOT the allen key drive.
Available individually in the following sizes:
Part
Number
Description
Outside
Diameter
To Suit Allen
Key Size
LBUT5
5mm Button Insert
7.8mm
4
LBUT6
6mm button insert
9.3mm
5
LBUT8
8mm Button Insert
12.5mm
6
LBUT10
10mm Button Insert
14.9mm
8
Cup Washers
The cup washer slides up the thread of the bolt
and shrouds the head, leaving the head surface
exposed. Good way to colour contrast – try these
with a different coloured Aluminium bolt for a truly
unique look. Available in the following sizes:
Part
Number
Description
Outside
Diameter
LWACP5
5mm Cup Washer
10.6mm
LWACP6
6mm Cup Washer
12.00mm
LWACP8
8mm Cup Washer
15.9mm
LWACP10
10mm Cup Washer
18.7mm
Hose Separators
Don’t let your lines rub you up the wrong way!
Separate them with these neat little additions.
Supplied with a colour co-ordinated Countersunk
Bolt and Nyloc Nut to clamp a 7mm hose.
Part
Number
Description
HOSESEP10
Brake line hose separator kit
16
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
A l u m i n i um
P Clips
Anodised Aluminium rubber lined P-Clips for
securing rear brake lines.
Part Number
PCLIP10
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Description
Rubber lined P-Clips
Tyre Valve Covers
Form an airtight seal and keep out the dirt with
our Tyre Valve Covers - universal fit for bikes, cars
and cycles.
Part Number
Description
LDCAP10
Individually
2DCAP10
Pair of Dust Caps
4DCAP10
Set of 4 Dust Caps
Bleed Nipple Covers
Keeps dust and grime away from your nipples!
Slides straight onto the bleed nipple and held
securely in place with the 'O' ring supplied.
Fits the most popular 7mm bleed nipples.
Part Number
Description
LBNCOVER
Individual
BNCOVER7-2
Pair of Covers with 'O' Rings
BNCOVER7-3
Set of 3 Covers with 'O' Rings
Flared Washers
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
ALUM INI UM
‘Chunky’ Cup Washer, designed to accept either
a standard M6 Socket Cap Bolt or a Countersunk
Bolt. The outside diameter measures 25mm and
has a height of 7mm. Excellent for spreading the
load on deeper recessed panels.
17
STAINLES S S T E E L
BOLTS
** Denotes length to be selected.
Tapered Socket Cap
Length measurements are taken from below the head
Part
Number
Thread
Diameter/Pitch
Allen Key
Drive
Max Head
Diameter
Lengths Available
LSSSC5**
M5 x 0.8mm
4mm
7.9mm
10mm, 12mm, 15mm, 20mm,
25mm, 30mm
LSSSC6**
M6 x 1.00mm
5mm
9.9mm
10mm, 12mm, 15mm, 20mm,
25mm, 30mm, 35mm, 40mm,
45mm, 50mm, 55mm, 60mm,
65mm, 70mm, 75mm, 80mm,
85mm, 90mm, 95mm
LSSSC8**
M8 x 1.25mm
6mm
12.4mm
15mm, 20mm, 25mm, 30mm,
35mm, 40mm, 45mm, 50mm,
55mm, 60mm, 65mm, 70mm,
75mm,
LSSSC10**
M10 x 1.50mm
8mm
15.8mm
20mm, 25mm
LSSSC10**F
M10 x 1.25mm
8mm
15.8mm
20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55mm,
60mm, 65mm, 70mm, 75mm,
80mm, 85mm
Flanged Hex Head
Length measurements are taken from below the head
Part
Number
Thread
Diameter/Pitch
Socket
Size
Max Head
Diameter
Lengths Available
LSSHX5**
M5 x 0.8mm
7mm
9.9mm
10mm, 12mm, 15mm, 20mm, 25mm,
30mm, 35mm
LSSHX6**
M6 x 1.00mm
8mm
11.9mm
10mm, 12mm, 15mm, 20mm, 25mm,
30mm, 35mm, 40mm, 45mm, 50mm,
55mm, 60mm, 65mm, 70mm, 75mm,
80mm, 85mm, 90mm
LSSHX8**
M8 x 1.25mm
12mm
15.8mm
15mm, 20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55mm, 60mm,
65mm, 70mm, 75mm
LSSHX10** F
M10 x 1.25mm
13mm
17.8mm
20mm, 25mm, 30mm, 35mm, 40mm,
45mm, 50mm, 52mm, 55mm, 57mm,
60mm, 65mm, 70mm, 75mm, 80mm
Countersunk Bolts
Length measurements are taken including the head
Part
Number
Thread
Diameter/Pitch
Allen Key
Drive
Max Head
Diameter
Lengths Available
LSSCS5**
M5 x 0.8mm
3mm
10.0mm
15mm, 20mm, 25mm
LSSCS6**
M6 x 1.00mm
4mm
12.0mm
15mm, 25mm, 30mm, 35mm,
40mm, 60mm
LSSCS8**
M8 x 1.25mm
5mm
15.7mm
30mm, 40mm
18
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
Race Spec Bolts
Part
Number
Thread
Diameter/Pitch
Socket
size
Max Head
Diameter
Lengths Available
LSSHX6**
M6 x 1.00mm
8mm
11.0mm
10mm, 15mm, 20mm,
25mm
LSSHX8**
M8 x 1.25mm
10mm
15.0mm
25mm, 30mm, 35mm,
40mm, 45mm
LSSHX10**
M10 x 1.50mm
12mm
17.0mm
25mm
LSSHX10**F
M10 x 1.25mm
12mm
17.0mm
30mm, 60mm, 65mm,
70mm, 75mm
Parallel Head Bolts
ALL AVAILABLE IN POLISHED STAINLESS
Length measurements are taken from below the head
Part
Number
Thread
Diameter/Pitch
Allen key
size
Max Head
Diameter
Lengths Available
LSSPB5**
M5 x 0.8mm
4mm
8.0mm
8mm, 10mm, 12mm,
16mm, 20mm, 25mm,
30mm
LSSPB6**
M6 x 1.00mm
5mm
10.0mm
10mm, 12mm, 16mm,
20mm
LSSPB8**
M8 x 1.25mm
6mm
12.5mm
40mm, 45mm
LSSPB10**
M10 x 1.25mm
8mm
25mm
60mm
Spike Head Bolts
S t a i n l e s s S teel
Length measurements are taken from below the head
Length measurements are taken from below the head
Part
Number
Thread
Diameter/Pitch
Socket
size
Max Head
Diameter
Lengths Available
LSSSK6**
M6 x 1.00mm
6mm
10.0mm
10mm, 12mm, 15mm,
20mm, 25mm, 27mm,
30mm, 35mm, 40mm,
45mm, 50mm, 55mm,
60mm, 65mm, 70mm,
75mm, 80mm, 85mm,
90mm
See page 76 for our UNC Imperial range.
STAINLESS STEEL
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
19
STAINLESS S T E E L
Dome Head/Fairing Bolts
Length measurements are taken from below the head
Part
Number
Thread
Diameter/Pitch
Allen Key
Drive
Max Head Lengths Available
Diameter
LSSFB412F
M4 (0.50)
3mm
8mm
12mm
LSSFB5**
M5 (0.8)
4mm
12mm
12mm, 16mm, 20mm, 25mm
LSSFB516XL
M5 (0.8)
4mm
16mm
16mm
LSSFB6**
M6 (1.00)
5mm
16mm
16mm, 20mm, 25mm, 30mm,
35mm, 40mm
LSSFB6**XS
M6 (1.00)
5mm
12mm
16mm, 20mm, 30mm
LSSFB8**
M8 (1.25)
5mm
16mm
20mm, 25mm, 30mm, 35mm,
40mm
LSSFB10**F
M10 (1.25)
6mm
18mm
25mm, 30mm, 35mm
NUTS & WASHERS
Flanged Nuts
Part Number
Thread/Pitch
Socket Size
LSSFLN5
M5 x 0.8mm
8mm
LSSFLN6
M6 x 1.00mm
10mm
LSSFLN8
M8 x 1.25mm
12mm
LSSFLN10
M10 x 1.50mm
14mm
LSSFLN10F
M10 x 1.25mm
14mm
LSSFLN10FF
M10 x 1.00mm
14mm
LSSFLN12FF
M12 x 1.25mm
15mm
Part Number
Thread/Pitch
Socket Size
LSSDOMENUT6
M6 x 1.00mm
10mm
LSSDOMENUT8
M8 x 1.25mm
13mm
Dome Nuts
Flat Washers
Part Number
Inside
Diameter
Outside
Diameter
Thickness
LSSWA6
6mm
12mm o/d
1.6mm
LSSWA6-15
8mm
15mm o/d
1.6mm
LSSWA8
8mm
16mm o/d
1.6mm
LSSWA10
10mm
20mm o/d
1.6mm
Countersunk Washers
Part Number
Size
Outside Diameter
Thickness
LSSWAC5-15
M5
15mm
4mm
LSSWAC6-19
M6
19mm
4.5mm
LSSWAC6-22
M6
22mm
4.5mm
LSSWAC8-25
M8
25mm
5.5mm
20
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
S t a i n l e s s S t eel
ALL AVAILABLE IN POLISHED STAINLESS
STAI NLESS STEEL
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
21
RACE-SPE C
RACE SPEC HEX HEAD
A New Generation of Bolt!
Our Race-Spec bolts are designed for professionals, enthusiasts
and those who like attention to detail. By reducing the socket
size/head diameter and machining out the head, we have
achieved a significant weight saving. On average these bolts
weigh 45% less than steel equivalents without any compromise in
strength or durability.
These products have been developed at the cutting edge of
competition and the qualities are recognized and widely used by
top Race Teams internationally.
It is possible to save an amazing two kilos on an average
motorcycle. This range of bolts are supplied 'off the machine
with no polishing' to give the factory look.
Length measurements are taken from below the head.
Part
Number
Diameter
& Thread
Length
Thread
Length
Head
Diameter
Socket
Size
TIHX510R
M5 x 0.8mm
10mm
10mm
10mm
7mm
TIHX512R
M5 x 0.8mm
12mm
12mm
10mm
7mm
TIHX516R
M5 x 0.8mm
16mm
16mm
10mm
7mm
TIHX520R
M5 x 0.8mm
20mm
20mm
10mm
7mm
TIHX525R
M5 x 0.8mm
25mm
25mm
10mm
7mm
TIHX610R
M6 x 1.00mm
10mm
10mm
11mm
8mm
TIHX612R
M6 x 1.00mm
12mm
12mm
11mm
8mm
TIHX614R
M6 x 1.00mm
14mm
14mm
11mm
8mm
TIHX616R
M6 x 1.00mm
16mm
16mm
11mm
8mm
TIHX618R
M6 x 1.00mm
18mm
18mm
11mm
8mm
TIHX620R
M6 x 1.00mm
20mm
20mm
11mm
8mm
TIHX622R
M6 x 1.00mm
22mm
22mm
11mm
8mm
TIHX625R
M6 x 1.00mm
25mm
25mm
11mm
8mm
TIHX628R
M6 x 1.00mm
28mm
28mm
11mm
8mm
TIHX630R
M6 x 1.00mm
30mm
30mm
11mm
8mm
TIHX632R
M6 x 1.00mm
32mm
32mm
11mm
8mm
TIHX635R
M6 x 1.00mm
35mm
25mm
11mm
8mm
TIHX640R
M6 x 1.00mm
40mm
25mm
11mm
8mm
TIHX645R
M6 x 1.00mm
45mm
25mm
11mm
8mm
TIHX650R
M6 x 1.00mm
50mm
25mm
11mm
8mm
TIHX655R
M6 x 1.00mm
55mm
25mm
11mm
8mm
TIHX660R
M6 x 1.00mm
60mm
25mm
11mm
8mm
TIHX665R
M6 x 1.00mm
65mm
25mm
11mm
8mm
TIHX670R
M6 x 1.00mm
70mm
25mm
11mm
8mm
TIHX675R
M6 x 1.00mm
75mm
25mm
11mm
8mm
TIHX680R
M6 x 1.00mm
80mm
25mm
11mm
8mm
TIHX685R
M6 x 1.00mm
85mm
25mm
11mm
8mm
TIHX690R
M6 x 1.00mm
90mm
25mm
11mm
8mm
TIHX720R
M7 x 1.00mm
20mm
20mm
11mm
8mm
TIHX740R
M7 x 1.00mm
40mm
20mm
11mm
8mm
TIHX750R
M7 x 1.00mm
50mm
20mm
11mm
8mm
TIHX760R
M7 x 1.00mm
60mm
20mm
11mm
8mm
TIHX780R
M7 x 1.00mm
80mm
20mm
11mm
8mm
TIHX815R
M8 x 1.25mm
15mm
15mm
15mm
10mm
TIHX820R
M8 x 1.25mm
20mm
20mm
15mm
10mm
TIHX825R
M8 x 1.25mm
25mm
25mm
15mm
10mm
TIHX828R
M8 x 1.25mm
28mm
28mm
15mm
10mm
TIHX830R
M8 x 1.25mm
30mm
30mm
15mm
10mm
22
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n i um
ALL AVAILABLE IN MACHINE FACTORY FINISH
Selected lengths now available
in Stainless Steel (See page 19).
Diameter
& Thread
Length
Thread
Length
Head
Diameter
Socket
Size
TIHX832R
M8 x 1.25mm
32mm
30mm
15mm
10mm
TIHX835R
M8 x 1.25mm
35mm
25mm
15mm
10mm
TIHX840R
M8 x 1.25mm
40mm
25mm
15mm
10mm
TIHX845R
M8 x 1.25mm
45mm
25mm
15mm
10mm
TIHX850R
M8 x 1.25mm
50mm
25mm
15mm
10mm
TIHX855R
M8 x 1.25mm
55mm
25mm
15mm
10mm
TIHX860R
M8 x 1.25mm
60mm
25mm
15mm
10mm
TIHX865R
M8 x 1.25mm
65mm
25mm
15mm
10mm
TIHX870R
M8 x 1.25mm
70mm
25mm
15mm
10mm
TIHX880R
M8 x 1.25mm
80mm
25mm
15mm
10mm
TIHX885R
M8 x 1.25mm
85mm
25mm
15mm
10mm
TIHX1020FR
M10 x 1.25mm
20mm
20mm
17mm
12mm
TIHX1025FR
M10 x 1.25mm
25mm
25mm
17mm
12mm
TIHX1030FR
M10 x 1.25mm
30mm
30mm
17mm
12mm
TIHX1035FR
M10 x 1.25mm
35mm
25mm
17mm
12mm
TIHX1040FR
M10 x 1.25mm
40mm
25mm
17mm
12mm
TIHX1045FR
M10 x 1.25mm
45mm
25mm
17mm
12mm
TIHX1050FR
M10 x 1.25mm
50mm
25mm
17mm
12mm
TIHX1055FR
M10 x 1.25mm
55mm
25mm
17mm
12mm
TIHX1057FR
M10 x 1.25mm
57mm
25mm
17mm
12mm
TIHX1060FR
M10 x 1.25mm
60mm
25mm
17mm
12mm
TIHX1065FR
M10 x 1.25mm
65mm
25mm
17mm
12mm
TIHX1070FR
M10 x 1.25mm
70mm
25mm
17mm
12mm
TIHX1075FR
M10 x 1.25mm
75mm
25mm
17mm
12mm
TIHX1080FR
M10 x 1.25mm
80mm
25mm
17mm
12mm
TIHX1090FR
M10 x 1.25mm
90mm
25mm
17mm
12mm
mm
10
20
30
40
50
60
70
80
TI TANIUM
Part
Number
90
100
110
120
130
140
23
TITANIUM PA RT S
BOLTS
** Denotes length to be selected
Tapered Socket Cap
Length measurements are taken from below the head
Part
Number
Thread
& Pitch
Allen Key
Drive
Max Head
Diameter
Lengths Available
TISC4**
M4 x 0.70mm
3mm
6.9mm
10mm, 12mm, 15mm, 20mm,
25mm, 35mm
TISC5**
M5 x 0.80mm
4mm
7.9mm
10mm, 12mm, 15mm, 20mm,
25mm, 30mm, 35mm, 40mm,
45mm, 50mm, 55mm, 70mm
TISC6**
M6 x 1.00mm
5mm
9.9mm
10mm, 12mm, 15mm, 20mm,
22mm, 25mm, 28mm 30mm,
35mm, 40mm, 45mm, 50mm,
55mm, 60mm, 65mm, 70mm,
75mm, 80mm, 85mm, 90mm,
95mm, 100mm, 115mm
TISC720
M7 x 1.00mm
5mm
9.9mm
20mm
TISC8**
M8 x 1.25mm
6mm
12.5mm
15mm, 20mm, 25mm, 30mm,
35mm, 40mm, 45mm, 50mm,
55mm, 60mm, 65mm, 70mm,
75mm, 80mm, 85mm, 90mm,
95mm, 100mm
TISC10**
M10 x 1.50mm
8mm
15.8mm
20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55mm,
70mm, 75mm, 80mm
TISC10**F
M10 x 1.25mm
8mm
15.8mm
20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55mm,
60mm, 65mm, 70mm, 75mm,
80mm, 85mm
Flanged Hex Head
Length measurements are taken from below the head
Part
Number
Thread
& Pitch
Socket
Size
Flange
Diameter
Lengths Available
TIHX4**
M4 x 0.70mm
6mm
8mm
10mm, 15mm, 20mm, 25mm
TIHX5**
M5 x 0.80mm
7mm
10mm
10mm, 12mm, 15mm, 20mm,
25mm, 30mm, 40mm, 45mm
TIHX6**
M6 x 1.00mm
8mm
12mm
10mm, 12mm, 14mm, 15mm,
16mm, 18mm, 20mm, 22mm,
25mm, 28mm, 30mm, 32mm,
35mm, 40mm, 45mm, 50mm,
55mm, 60mm, 65mm, 70mm,
75mm, 80mm, 85mm, 90mm,
95mm, 100mm, 105mm, 115mm
TIHX8**
M8 x 1.25mm
12mm
16mm
15mm, 20mm, 25mm, 28mm,
30mm, 32mm, 35mm, 40mm,
45mm, 47mm, 50mm, 55mm,
60mm, 65mm, 70mm, 80mm,
85mm
TIHX10**
M10 x 1.50mm
12/13mm
18mm
20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55m,
60mm, 65mm , 70mm, 75mm
TIHX10**F
M10 x 1.25mm
12/13mm
18mm
15mm, 20mm, 25mm, 30mm,
35mm, 40mm, 45mm, 50mm,
55mm, 57mm, 60mm, 65mm,
70mm, 75mm, 80mm, 85mm,
90mm, 95mm, 100mm, 105mm,
110mm, 112mm, 115mm, 125mm
14mm
20mm
50mm, 60mm, 70mm, 80mm,
90mm
TIHX12**FF M12 x 1.25mm
24
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n i um
Countersunk Bolts
Length measurements include the head
Part
Number
Thread
& Pitch
Allen Key
Drive
Max Head Lengths Available
Diameter
TICS3**
M3 X 0.60mm
2mm
5.8mm
10mm, 15mm,
TICS4**
M4 X 0.70mm
2.5mm
7.8mm
15mm, 20mm, 45mm, 50mm
TICS5**
M5 x 0.80mm
3mm
9.8mm
8mm, 10mm, 15mm, 20mm,
25mm, 30mm,
TICS6**
M6 x 1.00mm
4mm
11.8.mm
15mm, 20mm, 25mm, 30mm,
35mm, 40mm, 45mm
TICS8**
M8 x 1.25mm
5mm
15.6mm
20mm, 25mm, 30mm, 35mm,
40mm, 45mm, 50mm, 55mm
TICS10**
M10 x 1.50mm
6mm
19.9mm
25mm, 30mm
TICS10**F
M10 x 1.25mm
6mm
19.9mm
20mm, 30mm
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Dome Head/Fairing Bolts
Length measurements are taken from below the head
Part
Number
Thread
& Pitch
Allen Key
Drive
Max Head Lengths Available
Diameter
TIFB412F
M4 x 0.50mm
3mm
8mm
12mm
TIFB4**
M4 x 0.70mm
3mm
8mm
10mm, 12mm, 15mm
TIFB5**
M5 x 0.80mm
4mm
12mm
10mm, 16mm, 20mm, 25mm,
30mm
TIFB516XL
M5 x 0.80mm
4mm
16mm
16mm
TIFB6*
M6 x 1.00mm
5mm
16mm
16mm, 20mm, 25mm, 30mm,
35mm, 40mm, 55mm
TIFB6**XS
M6 x 1.00mm
5mm
12mm
20mm, 30mm
TIFB8**
M8 x 1.25mm
5mm
16mm
20mm, 25mm, 30mm, 35mm
40mm, 85mm
TI TANIUM
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
25
TITANIUM PA RT S
NUTS
Full Nuts
Part Number
Thread & Pitch
Socket Size
TIFN4
M4 (0.70 pitch) Full Nut
7mm
TIFN5
M5 (0.80 pitch) Full Nut
8mm
TIFN6
M6 (1.00 pitch) Full Nut
10mm
TIFN8
M8 (1.25 pitch) Full Nut
13mm
TIFN10
M10 (1.50 pitch) Full Nut
17mm
TIFN10F
M10 (1.25 pitch) Full Nut
17mm
TIFN12
M12 (1.75 pitch) Full Nut
18mm
TIFN12F
M12 (1.50 pitch) Full Nut
18mm
TIFN12FF
M12 (1.25 pitch) Full Nut
18mm
Flanged Nuts
Part Number
Thread & Pitch
Socket Size
TIFLN5
M5 (0.80 pitch) Flanged Nut
8mm
TIFLN6
M6 (1.00 pitch) Flanged Nut
10mm
TIFLN8
M8 (1.25 pitch) Flanged Nut
13mm
TIFLN10
M10 (1.50 pitch) Flanged Nut
15mm
TIFLN10F
M10 (1.25 pitch) Flanged Nut
14mm
TIFLN10FF
M10 (1.00 pitch) Flanged Nut
14mm
TIFLN12
M12 (1.75 pitch) Flanged Nut
18mm
TIFLN12F
M12 (1.50 pitch) Flanged Nut
17mm
TIFLN12FF
M12 (1.25 pitch) Flanged Nut
17mm
Note: Also refer to our axle nuts on page 54/55 where
larger sizes are available.
Nyloc Nuts
Part Number
Thread & Pitch
Socket Size
TINYN4
M4 (0.70 pitch) Nyloc Nut
7mm
TINYN5
M5 (0.80 pitch) Nyloc Nut
8mm
TINYN6
M6 (1.00 pitch) Nyloc Nut
10mm
TINYN8
M8 (1.25 pitch) Nyloc Nut
13mm
TINYN10
M10 (1.50 pitch) Nyloc Nut
16mm
TINYN10F
M10 (1.25 pitch) Nyloc Nut
16mm
TINYN12
M12 (1.75 pitch) Nyloc Nut
20mm
TINYN12F
M12 (1.50 pitch) Nyloc Nut
20mm
TINYN12FF
M12 (1.25 pitch) Nyloc Nut
20mm
Flanged Nyloc Nuts
Part Number
Thread & Pitch
Socket Size
TINYNFL5
M5 (0.80 pitch) Flanged Nyloc Nut
8mm
TINYNFL6
M6 (1.00 pitch) Flanged Nyloc Nut
10mm
TINYNFL8
M8 (1.25 pitch) Flanged Nyloc Nut
13mm
TINYNFL8F
M8 (1.00 pitch) Flanged Nyloc Nut
13mm
TINYNFL10
M10 (1.50 pitch) Flanged Nyloc Nut
15mm
TINYNFL10F
M10 (1.25 pitch) Flanged Nyloc Nut
15mm
TINYNFL12
M12 (1.75 pitch) Flanged Nyloc Nut
18mm
TINYNFL12F
M12 (1.50 pitch) Flanged Nyloc Nut
18mm
TINYNFL12FF
M12 (1.25 pitch) Flanged Nyloc Nut
18mm
26
26
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n i um
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Bi-Hex Plastic Nyloc Nuts
Part Number
Thread & Pitch
Socket Size
TINYNFLBH6
M6 (1.00 pitch) Flanged Bi-Hex Plastic Nyloc
11mm
TINYNFLBH8
M8 (1.25 pitch) Flanged Bi-Hex Plastic Nyloc
13mm
TINYNFLBH10
M10 (1.50 pitch) Flanged Bi-Hex Plastic Nyloc
15mm
TINYNFLBH10F
M10 (1.25 pitch) Flanged Bi-Hex Plastic Nyloc
15mm
TINYNFLBH10FF
M10 (1.00 pitch) Flanged Bi-Hex Plastic Nyloc
15mm
Metal Lock Nuts
Part Number
Thread & Pitch
Socket Size
TILOCKNUT6
M6 (1.00 pitch) Flanged Metal Locknut
10mm
TILOCKNUT8
M8 (1.25 pitch) Flanged Metal Locknut
12mm
TILOCKNUT10
M10 (1.50 pitch) Flanged Metal Locknut
14mm
TILOCKNUT10F
M10 (1.25 pitch) Flanged Metal Locknut
14mm
Bi-Hex Metal Lock Nuts
Thread & Pitch
Socket Size
M6 (1.00) Flanged Bi-Hex Metal Locknut
11mm
TILOCKNUTBH8
M8 (1.25) Flanged Bi-Hex Metal Locknut
13mm
TILOCKNUTBH10
M10 (1.50) Flanged Bi-Hex Metal Locknut
15mm
TILOCKNUTBH10F
M10 (1.25) Flanged Bi-Hex Metal Locknut
15mm
20
70
TITANI UM
Part Number
TILOCKNUTBH6
mm
10
30
40
50
60
80
90
100
110
120
130
140
27
TITANIUM PA RT S
WASHERS
Flat Washers
Part Number
Description
Outside
Diameter
Thickness
TIWA3
M3 Flat Washer
7mm
0.6mm
TIWA4
M4 Flat Washer
9mm
0.7mm
TIWA5
M5 Flat Washer
10mm
1.0mm
TIWA6
M6 Flat Washer
12mm
1.5mm
TIWA8
M8 Flat Washer
16mm
1.6mm
TIWA10
M10 Flat Washer
20mm
1.7mm
TIWA12
M12 Flat Washer
24mm
2.6mm
TIWA14
M14 Flat Washer
28mm
2.5mm
TIWA16
M16 Flat Washer
30mm
2.8mm
TIWA18
M18 Flat Washer
29mm
3.2mm
TIWA20
M20 Flat Washer
30mm
3.0mm
TIWA22
M22 Flat Washer
37mm
2.9mm
Penny Washers
Part Number
Description
Outside
Diameter
Thickness
TIWA5-15
M5 Penny Washer
15mm
1.0mm
TIWA5-20
M5 Penny Washer
20mm
1.1mm
TIWA6-15
M6 Penny Washer
15mm
1.5mm
TIWA6-20
M6 Penny Washer
20mm
1.5mm
TIWA6-25
M6 Penny Washer
25mm
1.8mm
TIWA6-30
M6 Penny Washer
30mm
1.6mm
Countersunk Washers
Part Number
Description
Outside
Diameter
Thickness
TIWAC6-22
M6 Countersunk Washer
22mm
4.5mm
Spring Washers
Part Number
Description
Outside
Diameter
Thickness
TIWAS10
M10 Spring Washer
16mm
2.6mm
TIWAS12
M12 Spring Washer
25mm
2.9mm
TIWAS14
M14 Spring Washer
28mm
3.6mm
TIWAS16
M16 spring washer
24mm
4.0mm
Drilled Washers
Part Number
Description
Outside
Diameter
Thickness
TIWAD5
M5 Drilled Washer
10mm
1.0mm
TIWAD6
M6 Drilled Washer
12mm
1.5mm
TIWAD8
M8 Drilled Washer
16mm
1.6mm
TIWAD10
M10 Drilled Washer
20mm
1.7mm
TIWAD12
M12 Drilled Washer
24mm
2.5mm
TIWAD28
M28 Drilled Washer
48mm
2.9mm
28
28
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
RODS
T i t a n i um
ALL AVAILABLE IN MACHINE FACTORY FINISH
Rods
We offer Titanium Rod in 240mm or 1m lengths.
Note: We would advise that care be taken when machining
Titanium as it is flammable and ideally requires cooling.
Wear on tooling is also extensive.
Part Number
Diameter & Length
TIROD3.2-240
Rod - M3.2 Diameter - approx 240mm Length
TIROD4-240
Rod - M4 Diameter - approx 240mm Length
TIROD5-240
Rod - M5 Diameter - approx 240mm Length
TIROD6-240
Rod - M6 Diameter - approx 240mm Length
TIROD8-240
Rod - M8 Diameter - approx 240mm Length
TIROD10-240
Rod - M10 Diameter - approx 240mm Length
TIROD12.7-240
Rod - M12.7 Diameter - approx 240mm Length
TIROD16-240
Rod - M16 Diameter - approx 240mm Length
TIROD18-240
Rod - M18 Diameter - approx 240mm Length
TIROD20-240
Rod - M20 Diameter - approx 240mm Length
TIROD5-1000
Rod - M5 Diameter - 1 Metre Length
TIROD6-1000
Rod - M6 Diameter - 1 Metre Length
TIROD8-1000
Rod - M8 Diameter - 1 Metre Length
TIROD10-1000
Rod - M10 Diameter - 1 Metre Length
TIROD12-1000
Rod - M12 Diameter - 1 Metre Length
TIROD16-1000
Rod - M16 Diameter - 1 Metre Length
TIROD18-1000
Rod - M18 Diameter - 1 Metre Length
TIROD20-1000
Rod - M20 Diameter - 1 Metre Length
Note: Sizes are approx as these are ‘ends’.
TI TANIUM
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
29
QUICK RE L E A S E FA S T E N E RS
QUICK RELEASE
1/4 TURN FASTENERS
Makes removal of bodywork easy and fast. Supplied
individually or in packs and in all materials. Available
materials, packs and lengths are listed below – choose
from D-Ring, Scalloped Head or Allen Key Drive, all
with a superb finish (17mm is the most popular,
14mm is the most common for thinner race fairings).
A l u m i n ium
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
D-Ring
Part Number
Description
LQRCLIP14
14mm Individual D-Ring Quick Release Fastener
LQRCLIP17
17mm Individual D-Ring Quick Release Fastener
LQRCLIP19
19mm Individual D-Ring Quick Release Fastener
QRCLIP1014
Packs of 10 - D-Ring 14mm Quick Release Fasteners
& Washers
QRCLIP1017
Packs of 10 - D-Ring 17mm Quick Release Fasteners
& Washers
QRCLIP1019
Packs of 10 - D-Ring 19mm Quick Release Fasteners
& Washers
Can also be purchased in packs complete with backing clips
QRPACKRIVET**
Pack of 10 D-Ring Fasteners with Rivet-on Backing Plates
and Rivets & Washers
QRPACKSLIDE**
Pack of 10 D-Ring Fasteners with Slide-on Backing Plates
& Washers
** Required length
Alley Key Drive
Part Number
Description
LQRCLIPAK14
14mm Individual Allen Key Quick Release Fastener
LQRCLIPAK17
17mm Individual Allen Key Quick Release Fastener
LQRCLIPAK19
19mm Individual Allen Key Quick Release Fastener
LQRCLIPAK21
21mm Individual Allen Key Quick Release Fastener
LQRCLIPAK24
24mm Individual Allen Key Quick Release Fastener
QRCLIPAK1014
Packs of 10 - Allen Key 14mm Quick Release Fasteners
with Washers
QRCLIPAK1017
Packs of 10 - Allen Key 17mm Quick Release Fasteners
with Washers
QRCLIPAK1019
Packs of 10 - Allen Key 19mm Quick Release Fasteners
with Washers
QRCLIPAK1021
Packs of 10 - Allen Key 21mm Quick Release Fasteners
with Washers
QRCLIPAK1024
Packs of 10 - Allen Key 24mm Quick Release Fasteners
with Washers
Can also be purchased in packs complete with backing clips
QRPACKAKRIVET**
Pack of 10 D-Ring Fasteners with Rivet-on Backing Plates,
Rivets and Washers
QRPACKAKSLIDE**
Pack of 10 D-Ring Fasteners with Slide-on Backing Plates
and Washers
** Required length
Note: We also offer the slide-on & rivet-on backing
clips individually, Please see page 74/75
30
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
S t a i n l e s s S teel
D-Ring
Part Number
Description
LSSQRCLIP14
14mm Length D-ring Quick Release Fastener
LSSQRCLIP17
17mm Length D-ring Quick Release Fastener
LSSQRCLIP19
19mm Length D-ring Quick Release Fastener
SSQRCLIP1017
17mm D-ring Quick Release Fastener - Pack of 10
SSQRCLIP1417
17mm D-ring Quick Release Fastener - Pack of 14
SSQRPACKRIVET1017
17mm D-ring Quick Release Fastener - Pack of 10 with Rivet on Backs & Washers
SSQRPACKRIVET1417
17mm D-ring Quick Release Fastener - Pack of 14 with Rivet on Backs & Washers
ALL AVAILABLE IN POLISHED STAINLESS
SSQRPACKSLIDE1017 17mm D-ring Quick Release Fastener - Pack of 10 with Slide on Backs & Washers
SSQRPACKSLIDE1417 17mm D-ring Quick Release Fastener - Pack of 14 with Slide on Backs & Washers
Alley Key Drive
Part Number
Description
LSSQRCLIPAK14
14mm Allen Key Drive Quick Release Fastener
LSSQRCLIPAK17
17mm Allen Key Drive Quick Release Fastener
LSSQRCLIPAK19
19mm Allen Key Drive Quick Release Fastener
SSQRPACKAKRIVET1017 17mm Allen Key Quick Release Fastener - Pack of 10 with Rivet on Backs & Washers
SSQRPACKAKRIVET1417 17mm Allen Key Quick Release Fastener - Pack of 14 with Rivet on Backs & Washers
SSQRPACKAKSLIDE1017 17mm Allen Key Quick Release Fastener - Pack of 10 with Slide on Backs & Washers
SSQRPACKAKSLIDE1417 17mm Allen Key Quick Release Fastener - Pack of 14 with Slide on Backs & Washers
B l a c k Z i n c C o a t e d S teel
AVAILABLE IN BLACK ZINC COATED
D-Ring
Part Number
Description
LDZUS-PANEX10
Individual Black Zinc Coated Steel D-Ring Quick Release Fastener
QRSTEEL17SETBK
Pack of 10 Black Steel 17mm Fasteners, Rivet on Backs and
Rivets & Washers
QRSTEELSETSLIDE
Pack of 10 Black Steel 17mm Fasteners, Slide on Backs and
Rivets & Washers
T i t a n i um
17mm is the perfect length and look for the
MV Agusta F4 and the Ducati 748/916/996 range.
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
D-Ring
Part Number
Description
TIQRCLIP17
17mm Titanium Quick Release Stud - D Ring
TIQRCLIP19
19mm Titanium Quick Release Stud - D Ring
Allen Key Drive
Part Number
Description
TIQRCLIP-AK17
17mm Titanium Quick Release Stud Allen Key
Drive
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
31
QUICK RELEASE FASTENERS
Black Zinc Coated Steel Quick Release Fasteners.
Strong and durable cost effective option, available
in 17mm only – the most popular length.
W OR KSHO P KIT S
WORKSHOP ASSORTMENTS
We offer a variety of tubs and workshop kits in aluminium.
Ideal for spares in the workshop or for that special project
– just choose your preferred quantity, colour and bolt
combination.
25pc Workshop Kit
Supplied with Copper Grease Lubricant, Allen Keys and Stickers
• WSKIT25
Assortment of 5mm, 6mm & 8mm Allen Bolts, Fairing
Bolts, Nuts and Washers.
100pc Workshop Tubs
Supplied in a handy tub with Allen Keys and Copper Grease
containing the following:
Allen Key Socket Cap Bolt Tub
• PBTUBALLEN
100 pc Metric Socket Cap Allen Key Bolt Tub - M5 - M8
Dome Head/Fairing Bolt Tub
• PBTUBFAIR
100 pc Metric Dome Head Allen Key Bolt Tub - M5 - M8
Mixed Bolt Tub
• PBTUBMIXED
100 pc Metric Assorted Dome Head & Socket Cap Allen
Key Bolt Tub - M5 - M8
Nut & Washer Tub
• PBTUBNUTS
100 pc Metric Assorted Full Nuts, Nyloc Nuts, & Washers
- M5 - M8
Dome Nut Tub
• PBTUBDOMENUT
100 pc Metric Assorted Dome Nuts - M4 - M5 - M6 - M8
- M10 - M10 Fine
Drilled Washer Tub
• PBTUBWAD
100 pc Drilled Washer Tub - M5 - M12
Threaded Collar Tub
• PBTUBCOLLAR
32
100 pc Threaded Collar Tub - M5 & M6 various outside
diameters & lengths for use as spacers, shoulders and
collars. Supplied only in natural finish.
Please note: Colour options are not available.
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
A l u m i n i um
200pc Workshop Box
Complete with Allen Keys, Copper Grease Lubricant, Anti-Scratch
Washers and Pro-Bolt Stickers. Contains the following:
• WSBOX200
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
(In our handy Workshop Box we supply) Allen Bolts,
Dome Head Bolts, Nuts, Washers, Countersunk Bolts,
Countersunk Washers and Cup Washers in the most
popular sizes.
WORKSHOP KI TS
500pc Workshop Cabinet
Ideal for large scale projects. Excellent value for
money, presented in a convenient cabinet and
comprises of the following:
• BCAB500
mm
Allen Bolts, Dome Head Bolts,
Countersunk Bolts, Nuts and
Washers in 5mm, 6mm and 8mm
sizes in their most popular lengths.
Also comes with Allen Keys, Copper
Grease Lubricant, Anti-Scratch
Washers and Pro-Bolt stickers.
10
20
30
40
50
60
70
80
90
100
110
120
130
140
33
WORKSHO P K I T S
S t a i n l e s s S teel
We offer a variety of tubs and workshop kits in Stainless
Steel. Ideal for spares in the workshop or for special
projects. Exact contents are available on-line and can be
amended if desired, with the agreement of Pro-Bolt.
50pc Workshop Kit
Supplied with Copper Grease Lubricant, Allen Keys and
Stickers containing the following:
• SSWSBOX50
Comprises:
10 Nuts • 10 Washers
10 Countersunk Bolts
10 Flanged Hex Head Bolts
10 Tapered Socket Caps Bolts
ALL AVAILABLE IN POLISHED STAINLESS
200pc Workshop Box
Supplied with Allen Keys, Copper Grease Lubricant, AntiScratch Washers and Pro-Bolt Stickers containing the
following:
• SSWSBOX200
Comprises:
25 Assorted Washers - M5 - M10
25 Countersunk Bolts
30 Assorted Nuts - M5 - M10
60 Flanged Hex Head Bolts - M5 - M10
60 Tapered Socket Cap Bolts - M5 - M10
100pc Workshop Tubs
Supplied in a handy tub with Allen Keys and Copper
Grease containing the following:
Allen Key Socket Cap Bolts
• SSTUBALLEN
100 pc Metric Tapered Socket Cap Allen Key
Bolt Tub - M5 - M8
Dome Head/Fairing Bolts
• SSTUBFAIR
100 pc Metric Dome Head Allen Key Bolt
Tub - M5 - M8
Mixed Bolt Tubs
• SSTUBMIXED
34
100 pc Metric Assorted Dome Head & Tapered
Socket Cap Allen Key Bolt Tub - M5 - M8
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n i um
In our Titanium workshop boxes we provide a
selection of our most popular parts. Exact contents
are available on-line and can be amended if desired,
with the agreement of Pro-Bolt.
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
50pc Workshop Box
200pc Workshop Box
Supplied with Allen Keys, Copper Grease Lubricant, Anti-Scratch
Washers and Pro-Bolt Stickers containing the following:
Supplied with Copper Grease Lubricant, Allen Keys
and Stickers containing the following:
• TIWSBOX50
• TIWSBOX200
Comprises:
10 Nuts
10 Washers
10 Countersunk Bolts
10 Flanged Hex Head Bolts
10 Tapered Socket Caps Bolts
100pc Workshop Box
100pc Flanged Hex Head
'Race-spec' Workshop Box
Supplied with Copper Grease Lubricant, Allen Keys
and Stickers containing the following:
• TIWSBOX100
Comprises:
25 Assorted Washers - M5 - M10
25 Countersunk Bolts
30 Assorted Nuts - M5 - M10
60 Flanged Hex Head Bolts - M5 - M10
60 Tapered Socket Cap Bolts - M5 - M10
Supplied with Copper Grease and Stickers, containing
the following:
Comprises:
15 Assorted Washers
10 Countersunk Bolts
25 Assorted Nuts
25 Flanged Hex Head Bolts
25 Tapered Socket Cap Bolts
• TIWSBOX100RS
Race-Spec Flanged Hex Head Bolts
M5 - M10
WORKSHOP KI TS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
35
MOTORCY C L E PA RT S
FULL MONTY BOLT KITS
A l u m i nium
All our Bolt Kits are available in one easy pack which
includes: Side Engine Casing Kit, Fairing Bolt Kit, Screen Bolt
Kit, Fuel Cap Kit, Mudguard/Hugger Kit and Number Plate
Kit. You can ensure a colour consistent finish throughout.
We also include a complementary selection of 20 bolts
- assorted Dome Head and Socket Cap Bolts, which can be
used as spares or used in other non stress areas (for example
Heel Guards, Mudguards and Chain Guards).
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
Choose from our coloured Aluminium
or polished Stainless Steel Ranges.
36
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
FULL MONTY ACCESSORY KITS
A l u m i n i um
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Our Accessory Kits are available in one easy pack.
Products vary slightly, so please ask for exact
contents or view specific model on-line. Achieve a
colour consistent look throughout your bike –
excellent gift idea! Also included is a complementary
selection of 20 bolts – assorted Dome Head and
Socket Cap Bolts which can be used as spares
or in non stress areas (for example, Heel Guards,
Mudguards and Chain Guards).
MOTORCYCLE PARTS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
37
MOTORCY C L E PA RT S
ENGINE CASING KITS
A l u m i nium
Our Engine Kits include all the necessary bolts to replace
all side engine-casing bolts in your chosen colour. Also
included are Copper Grease Lubricant and the necessary
Allen Keys. Kits are easy to use – remove one bolt at a
time, and replace with the identical length bolt from
your Pro-Bolt kit.
All Engine Kits are supplied using Allen Key Bolts. Where
fitment will allow, we also offer Flanged Hex Head kits.
Please note: Oil Filler Caps and Cam Cover Bolts are sold
separately.
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
T i t a nium
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
38
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
CAM COVER BOLTS
A l u m i n i um
An absolute must for any GSXR & Bandit. Replace dull
and rusty Cam Cover bolts, our bolts are supplied in a
smooth polished finish. Available individually or as a
full set of 12 (8 top & 4 side). The finishing touch to any
engine!
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
Suzuki Bandit/GSXR
Description
Stainless Steel
Part Number
Available individually or as a set of 8.
Fits: Fazer 600, Fazer 1000, XJR1200 & XJR1300
Single Top Cylinder Head Bolt
SSSITEM1
Set of 8 Cylinder Head Bolt
SSSITEM1-8
Yamaha Fazer XJR
Single Side Cam Bolt
SSSITEM3
Description
Set of 4 Side Cam Bolts
SSSITEM3-4
Aluminium Part
Number
Complete set of 8 Top & 4 Side
SSSITEM13FULL
Individual
LSPYAM10
Set of 8
SPYAM10-8
Stainless Steel
Aluminium
T i t a n ium
AVAILABLE ONLY
IN NATURAL
Our Sump Bolts are pre-drilled on all flats for ease of
lockwiring. They are also fitted with a magnetic stud
to assist with removing particles from the engine oil,
which could potentially be damaging. See our model
specific price list for detailed fitment information.
Sump Bolts
Part Number
Thread & Pitch
TISUMP1215MAG
M12 x 1.50mm x 15mm
TISUMP1215FMAG
M12 x 1.25mm x 15mm
TISUMP1412MAG
M12 x 1.50mm x 12mm
TISUMP1412FMAG
M12 x 1.25mm x 12mm
TISUMP1612FMAG
M16 x 1.50mm x 12mm
Note: As these items are fitted with a magnetic
stud, we are not able to offer an anodised finish as
this would interfere with the anodising process.
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
39
MOTORCYCLE PARTS
SUMP BOLTS
MO TOR CY C L E PA RT S
OIL FILLER CAPS
A l u m i nium
Machined to a smooth finish in your choice of
colour – complete with 'O' ring. Each has a hole
drilled in the top corner to allow the use of lock wire
– complements our engine casing bolt kits to achieve
the finished look. 13 fitments available to cover a
wide range of models.
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Oil Filler Caps
Part Number
Description
Thread & Pitch
LOFCB10
BMW/F650 etc
M24mm x 3.00mm
LOFCB20
BMW/R1200GS etc
M34mm x 1.50mm
LOFCB30
BMW/S1000R
M24mm x 2.00mm
LOFCH10
Honda Standard - some Triumph
M20mm x 2.50mm
LOFCH20
Honda BlackBird/VFR Etc
M22mm x 3.00mm
LOFCY10
Yamaha Standard
M27mm x 3.00mm
LOFCY20
Yamaha XJR1300
M25mm x 1.00mm
LOFCY30
Yamaha R1 (2004+)
M27mm x 3.00mm
LOFCK10
Kawasaki Standard
M30mm x 1.50mm
LOFCK20
Kawasaki ZX7R
M38mm x 1.50mm
LOFCK30
Kawasaki ZX9R (98)
M20mm x 2.00mm
LOFCS10
Suzuki & some Aprilia
M20mm x 1.50mm
LOFCD1O
Ducati & some Aprilia
M22mm x 1.50mm
40
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
FAIRING BOLT KITS
A l u m i n i um
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Our Fairing Kits include all the necessary bolts and
anti-scratch washers to replace bolts on the Top
and Side Fairing, Seat Unit, Belly Pan, Mudguard
& Hugger. Allen Keys, Pro-Lube & Stickers are also
included in the kits. Replacement backing clips are
not included as standard – our bolt kits will screw
into the original backing clips. Where this is not
possible, we do provide replacement nuts or clips
for behind the fairing.
Note: Backing clips are available to order
separately in our ancillary section on page 74/75
Don't forget to order your matching Screen Kit!
ALL AVAILABLE IN POLISHED STAINLESS
mm
10
20
30
40
50
60
70
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
80
90
100
110
120
130
140
41
MOTORCYCLE PARTS
T i t a n i um
Stainless Steel
TITANIUM PA RT S
1/4 TURN QUICK RELEASE
FAIRING KITS
A l l M a t e rials
ALUMINIUM:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Our Quick Release Fairing Kits will provide D-Ring
1/4 turn replacements where quick release are present
as standard. All other bolts on the Side Fairing, Mudguard,
Belly Pan and Seat Unit will be replaced with standard
threaded bolts. This will provide a colour consistent finish
throughout the fairing.
STAINLESS STEEL:
ALL AVAILABLE IN POLISHED STAINLESS
TITANIUM:
BLUE • GOLD • NATURAL • PURPLE HAZE
Note: Slide-On & Rivet-On backing plates are available on page 74/75
Aluminium D-Ring
Aluminium
Allen Key Drive
Stainless Steel
D-Ring
Stainless Steel
Allen Key Drive
Titanium
D-Ring
RSV Mille (00-02)
FOAP100QR
FOAP100QRAK
FOAP100QRSS
FOAP100QRAKSS
FOAP100QRTI
RSVR (02-03)
FOAP110QR
FOAP110QRAK
FOAP110QRSS
FOAP110QRAKSS
FOAP110QRTI
RSVR Factory (05)
FOAP120QR
FOAP120QRAK
FOAP120QRSS
FOAP120QRAKSS
FOAP120QRTI
RSVR Factory (06+)
FOAP130QR
Model of Bike
Aprilia
FOAP130QRSS
FOAP130QRTI
Ducati
748/916/996
FDU032QR
749R
FDU110QR
FDU032QRAK
FDU032QRSS
FDU110QRSS
FDU032QRAKSS
FDU032QRTI
FDU110QRTI
999R
FDU150QR
FDU115QRSS
FDU115QRTI
Honda
VFR400/NC30
FHO040QR
FHO040QRAK
FHO040QRSS
FHO040QRAKSS
FHO040QRTI
RVF400R/NC35
FHO042QR
FHO042QRAK
FHO042QRSS
FHO042QRAKSS
FHO042QRTI
VFR750 (94/97)
FHO135QR
FHO135QRAK
FHO135QRSS
FHO135QRAKSS
FHO135QRTI
Daytona 955i
FTR082QR
FTR082QRAK
FTR082QRSS
FTR082QRAKSS
FTR082QRTI
T595/955i
FTR120QR
FTR120QRAK
FTR120QRSS
FTR120QRAKSS
FTR120QRTI
R1 (98-99)
FYA397QR
FYA397QRAK
FYA397QRSS
FYA397QRAKSS
FYA397QRTI
R1 (00-01)
FYA398QR
FYA398QRAK
FYA398QRSS
FYA398QRAKSS
FYA398QRTI
R1 (02-03)
FYA399QR
FYA399QRAK
FYA399QRSS
FYA399QRAKSS
FYA399QRTI
R1 (04-06)
FYA400QR
FYA400QRAK
FYA400QRSS
FYA400QRAKSS
FYA400QRTI
R1 (07-08)
FYA405QR
FYA405QRAK
FYA405QRSS
FYA405QRAKSS
FYA405QRTI
R1 (09-10)
FYA406QR
FYA406QRAK
FYA406QRSS
FYA406QRAKSS
FYA406QRTI
FMVA100QR
FMVA100QRAK
FMVA100QRSS
FMVA100QRAKSS
FMVA100QRTI
Triumph
Yamaha
MV Agusta
F4
42
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
SCREEN BOLT KITS
A l l M a t e r ials
ALUMINIUM:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Screen Kits include the specified amount of 5mm
Screen Bolts, Nylon Washers and Rubber Nuts with Brass
Insert. 4mm fine pitch Screen Kits are also available for
Ducati, MV Agusta, Cagiva and Aprilia Factory RSVR.
Finish the look with our model specific Fairing Bolt Kits.
STAINLESS STEEL:
ALL AVAILABLE IN POLISHED STAINLESS
TITANIUM:
BLUE • GOLD • NATURAL • PURPLE HAZE
Aluminium Part
Number
Description
Stainless Steel Part
Number
Titanium Part
Number
4 Bolt Standard Kit
SK4
SK4SS
TISK4
5 Bolt Standard Kit
SK5
SK5SS
TISK5
6 Bolt Standard Kit
SK6
SK6SS
TISK6
7 Bolt Standard Kit
SK7
SK7SS
TISK7
8 Bolt Standard Kit
SK8
SK8SS
TISK8
9 Bolt Standard Kit
SK9
SK9SS
TISK9
10 Bolt Standard Kit
SK10
SK10SS
TISK10
TISKDUC7
7 Bolt 4mm Diameter Fine Pitch Special Kit
SKDUC7
SKDUC7SS
9 Bolt 4mm Diameter Fine Pitch Special Kit
SKDUC9
SKDUC9SS
TISKDUC9
14 Bolt 4mm Diameter Fine Pitch Special Kit
SKDUC14
SKDUC14SS
TISKDUC14
MOTORCYCLE PARTS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
43
MOTORCY C L E PA RT S
FUEL CAP BOLT KIT
These are the bolts that fit into the fuel cap
surround - they are available for all bikes
including the specially engineered Honda
bolts. Kits are very easy to fit - remove one
bolt at a time and replace with the identical
length Pro-Bolt.
44
s a l e s 0044 (0) 1684 851940
A l u m i nium
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
www.pro-bolt.com
BAR ENDS
A l u m i n i um
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Replace lost or damaged Steel Bar Ends and put some
colour where you can see it! Smooth finish and comes
complete with necessary fittings.
Description
Aluminium
Part Number
Pair of Bar Ends for Hollow Bars
BARENDUN10
Pair of Yamaha Bar Ends - R1 etc
BARENDYA10
Pair of Yamaha Bar Ends - R6 etc
BARENDYA20
Pair of Kawasaki Bar Ends - ZX6 / ZX9
BARENDKA10
Pair of Kawasaki Bar Ends - ZX7 / ZX12
BARENDKA20
Pair of Kawasaki Bar Ends - GPZ / Z1000 / ZZR
BARENDKA30
Pair of Kawasaki Bar Ends - ZX10R (2006)
BARENDKA40
Pair of Honda Bar Ends - CBR600 / CBR900 etc
BARENDHO10
Pair of Honda Bar Ends - SP1/SP2
BARENDHO20
Pair of Honda Bar Ends - Hornet '07
BARENDHO30
Pair of Aprilia Bar Ends - RSV Mille etc
BARENDAP10
Pair of Aprilia Bar Ends - RS125 / Pegaso
BARENDAP20
Pair of Aprilia Bar Ends - RSV/Factory/Tuono
BARENDAP30
Pair of Suzuki Bar Ends - GSXR600 K1/K2
BARENDSU10
Pair of Suzuki Bar Ends - SV650/GSXR750/SRAD/GSXR1100 - etc
BARENDSU20
Pair of Suzuki Bar Ends - SV650 / SV1000 / TL1000 etc
BARENDSU30
Pair of Suzuki Bar Ends - GSXR1300 etc
BARENDSU40
Pair of Suzuki Bar Ends - GSXR600 etc
BARENDSU50
Pair of Suzuki Bar Ends - GSXR1000 K6/Other
BARENDSU60
Pair of BMW bar Ends - F650/F800GS
BARENDBM10
Pair of BMW Bar Ends - S1000RR
BARENDBM20
MOTORCYCLE PARTS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
45
MOTORCY C L E PA RT S
TOP YOKE NUTS
A l u m i ni um
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Replace damaged or rusty Centre Stem Nuts
with something rather more colourful. See
our price list for fitment details.
T i t a ni um
Top yoke nuts
Description
Thread
& Pitch
Socket
Size
Aluminium
Part Number
Titanium
Part Number
Domed with Breather Hole
24mm x 1.00
30mm
LTYOKE10
TIYOKE10
Domed
25mm x 1.00
36mm
LTYOKE20
TIYOKE20
Domed
24mm x 1.50
32mm
LTYOKE30
TIYOKE30
Domed
28mm x 1.00
35mm
LTYOKE40
TIYOKE40
Domed
22mm x 1.00
30mm
LTYOKE50
TIYOKE50
Domed with Breather Hole
22mm x 1.00
30mm
LTYOKE50D
TIYOKE50D
Triumph Top Yoke Nut
22mm x 1.25
N/A
LTYOKE100
N/A
46
s a l e s 0044 (0) 1684 851940
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
www.pro-bolt.com
PRE-LOAD ADJUSTERS
A l u m i n i um
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
They look fantastic and are also functional. Allows
easy adjustment of fork spring compression, to
adapt to pillion passengers and different road types.
Supplied with steel grub screws to hold in place and
an allen key to fit. Sizes available to fit most models.
Please Note: These may not be compatible if a
steering damper is fitted.
HEXAGON FITMENT
Description
Aluminium
Part Number
Pre-Load 14mm
PLOAD14
Pre-Load 14mm - Thinner Fork Tops
PLOAD14-T
Pre-Load 17mm
PLOAD17
Pre-Load 19mm
PLOAD19
Pre-Load 22mm
PLOAD22
Example: PLOAD14 - 14mm
14mm
Example: PLOAD1814 - 18/14mm
18mm
14mm
FLAT/ROUNDED FITMENT
Description
Aluminium
Part Number
Pre-Load 18/14mm
PLOAD1814
Pre-Load 20/17mm
PLOAD2017
MOTORCYCLE PARTS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
47
MOTORCY C L E PA RT S
CABLE ADJUSTERS
A l u m i n ium
Exact replicas of the originals – easy to replace
and colour where you can see it!
Used on many models of Honda, Kawasaki,
Suzuki & Yamaha.
Description
Aluminium
Part Number
2 piece M8 thread
LCA10
1 piece M10 thread
LCA20
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
DIAL ADJUSTERS
Description
Aluminium
Part Number
1-4 position Dial Adjuster - many Suzuki
LDA10
1-5 position Dial Adjuster - some Kawasaki
LDA30
'Spin' type Dial Adjuster - many Honda & Kawasaki
LDA20
48
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
RESERVOIR CAPS
A l u m i n i um
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Superb smooth finish in a colour of your choice
– literally in your face! Get rid of ugly plastic stock
originals. We offer a wide range of Reservoir Caps
to fit front brake, clutch and rear brake cylinders
on a wide range of models. Comes complete
with Countersunk Bolts where necessary.
Measurements are the outside diameter.
Description
Aluminium
Part Number
Threaded Round Cap - 61mm o/d
RESR10
2 Screws Round Cap - 56mm o/d
RESR20
2 Screws Round Cap - 56mm o/d - with 15mm bolts
RESR20
2 Screws Round Cap - 56mm o/d - with 45mm bolts
RESR20-CS445
Threaded Round Cap - 38mm o/d
RESR30
Threaded Round Cap - 42mm o/d
RESR50
2 Screws 2 x 45 Round Cap - 53mm o/d Brembo
RESR60
Threaded Round Cap - 39mm o/d Brembo
RESR70
Threaded Round Cap - 56mm o/d
RESR80
Threaded Round Cap - 48mm o/d
RESR90
Oblong 43 x 75mm
RESO10
Oblong 37 x 55mm
RESO20
Oblong 37 x 55mm - with 42mm Bolts
RESO20-20
Oblong 43 x 85mm
RESO30
Oblong 47 x 69mm
RESO40
Oblong 57 x 33mm
RESO50
MOTORCYCLE PARTS
RESERVOIR CLIPS
To complement our top selling Reservoir Cap,
this clip works with our Reservoir Cap part
number ‘RESR10’. This will replace your original
mild steel clip – choose a complementing
or contrasting colour to your Reservoir Cap.
Supplied with matching bolt.
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
49
MOTORCY C L E PA RT S
GEAR SHIFT RODS
A l u m i ni um
Nice touch to customise your machine and easy to fit. When
fitting, allow that one end will be a reverse thread.
Male 6mm rods are supplied with standard and left hand thread
nuts to complete the look.
For reference purposes and for customised projects, we list below
total length and specify whether fitment is male or female.
Description
Aluminium
Part Number
Gear Shift Rod Female - 6mm Thread/6mm Thread - 145mm Overall Length
GRODF66145
Gear Shift Rod Female - 6mm Thread/6mm Thread - 150mm Overall Length
GRODF66150
Gear Shift Rod Female - 6mm Thread/6mm Thread - 154mm Overall Length
GRODF66154
Gear Shift Rod Female - 6mm Thread/6mm Thread - 162mm Overall Length
GRODF66162
Gear Shift Rod Female - 6mm Thread/6mm Thread - 170mm Overall Length
GRODF66170
Gear Shift Rod Female - 6mm Thread/6mm Thread - 176mm Overall Length
GRODF66176
Gear Shift Rod Female - 6mm Thread/6mm Thread - 180mm Overall Length
GRODF66180
Gear Shift Rod Female - 6mm Thread/6mm Thread - 184mm Overall Length
GRODF66184
Gear Shift Rod Female - 6mm Thread/6mm Thread - 210mm Overall Length
GRODF66210
Gear Shift Rod Female - 6mm Thread/6mm Thread - 255mm Overall Length
GRODF66255
Gear Shift Rod Female - 6mm Thread/6mm Thread - 272mm Overall Length
GRODF66272
Gear Shift Rod Female - 6mm Thread/6mm Thread - 284mm Overall Length
GRODF66284
Gear Shift Rod Female - 6mm Thread/8mm Thread - 214mm Overall Length
GRODF68214
Gear Shift Rod Female - 6mm Thread/8mm Thread - 240mm Overall Length
GRODF68240
Gear Shift Rod Male - 6mm Thread/6mm Thread - 140mm Overall Length
GRODM66140
Gear Shift Rod Male - 6mm Thread/6mm Thread - 149mm Overall Length
GRODM66149
Gear Shift Rod Male - 6mm Thread/6mm Thread - 163mm Overall Length
GRODM66163
Gear Shift Rod Male - 6mm Thread/6mm Thread - 188mm Overall Length
GRODM66188
Gear Shift Rod Male - 6mm Thread/6mm Thread - 190mm Overall Length
GRODM66190
Gear Shift Rod Male - 6mm Thread/6mm Thread - 195mm Overall Length
GRODM66195
Gear Shift Rod Male - 6mm Thread/6mm Thread - 197mm Overall Length
GRODM66197
Gear Shift Rod Male - 6mm Thread/6mm Thread - 220mm Overall Length
GRODM66220
Gear Shift Rod Male - 6mm Thread/6mm Thread - 224mm Overall Length
GRODM66224
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
PADDOCK STAND BOBBINS
Essential for all bikers! Screws straight into
the swingarm, showing no ugly steel bolts.
Available in M6, M8 & M10 .
Description
Aluminium
Part Number
Pair of M6 Paddock Stand Bobbins
BOB6
Pair of M8 Paddock Stand Bobbins
BOB8
Pair of M10 Paddock Stand Bobbins
BOB10
50
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
CHAIN ADJUSTER BLOCKS
A l u m i n i um
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
Smarten up your rear end! Replace rusty stock originals
with these shiny new blocks – supplied in pairs.
Description
Aluminium
Part Number
Aprilia RSV (98-03) Falco, Tuono Pair of Blocks
CABPRA10
Aprilia RSV/R (2004+) Pair of Blocks
CABPRA20
Honda CBR900RR (00-03) Pair of Blocks
CABPRH10
Honda SP1/SP2 Pair of Blocks
CABPRH20
Honda CB1300 Pair of Blocks
CABPRH30
Honda CBR1000 ‘08+ Pair of Blocks
CABPRH50
Kawasaki ZXR400/ZX7/ZX9 Pair of Blocks
CABPRLEFTK10
Kawasaki KLX250/Versys 650 Pair of Blocks
CABPRLEFTK20
Kawasaki ZX6/ZX7/ZX9/ZX12 Pair of Blocks
CABPRK10
Kawasaki ZX10R (2004-2005) Pair of Blocks
CABPRK20
Kawasaki ZX10R ‘06+ Pair of Blocks
CABPRK40
Kawasaki ZX10R ‘08 Pair of Blocks
CABPRK50
Suzuki GSXR600/750/1000/TL1000/GSXR1300 Pair of Blocks
CABPRS10
Suzuki B-King Pair of Blocks
CABPRLEFTS10
Suzuki 1200 Bandit Pair of Blocks
CABPRS20
Yamaha R6 (98-02) / R1(98-03) Pair of Blocks
CABPRY10
Yamaha R6 (03+) / R1 Pair of Blocks
CABPRY20
Yamaha R1 (04+) / R1 Pair of Blocks
CABPRY40
Yamaha XJR1200/1300 Pair of Blocks
CABPRY50
Yamaha XJR1300SP Pair of Blocks
CABPRY60
T i t a n i um
CHAIN ADJUSTER BOLTS & NUTS
Description
Titanium
Part Number
Length
of bolt
Individual M8 x 45mm Chain Adjuster Bolt
TIAXLEADJ845
45mm
Individual M8 x 50mm Chain Adjuster Bolt
TIAXLEADJ850
50mm
Individual M8 x 55mm Chain Adjuster Bolt
TIAXLEADJ855
55mm
Individual M8 x 60mm Chain Adjuster Bolt
TIAXLEADJ860
60mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 45mm Bolts & Nuts
TIAXLE845SET
45mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 55mm Bolts & Nuts
TIAXLE855SET
55mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 60mm Bolts & Nuts
TIAXLE860SET
60mm
Description
Stainless
Steel Part
Number
Length
of bolt
Individual M8 x 45mm Chain Adjuster Bolt
LSSAXLEADJ845
45mm
Individual M8 x 55mm Chain Adjuster Bolt
LSSAXLEADJ855
55mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 45mm Bolts & Nuts
SSAXLE845SET
45mm
Chain Adjuster Bolt & Nut Set - Pair of M8 x 55mm Bolts & Nuts
SSAXLE855SET
55mm
Stainless Steel
ALL AVAILABLE IN
POLISHED STAINLESS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
51
MOTORCYCLE PARTS
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
For use with the Chain Adjuster Blocks above.
Smartens up the swingarm and very easy to fit.
Available individually or in sets:
MOTORCY C L E PA RT S
SPROCKET NUTS
A l u m i n ium
Put some colour in your nuts! Manufactured using aerospace
grade alloy with rolled threads for extra strength.
Note: Refer to the Pro-Bolt fitting and torque instructions
provided. These products are specifically designed and
manufactured in Aluminium and therefore we specify a
torque setting of 33lbsft/44Nm which is significantly lower
than manufacturer’s steel originals.
Description
Aluminium
Part Number
Set of 6 10mm x 1.25mm pitch - most models
SPN10
Set of 6 12mm x 1.25mm pitch - some Honda
and large CC Suzuki
SPN12
52
s a l e s 0044 (0) 1684 851940
ALL AVAILABLE IN A CHOICE OF 8 COLOURS:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
www.pro-bolt.com
SPROCKET NUTS
T i t a n i um
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Both Stainless Steel and Titanium Sprocket
Nuts should be torqued to your manufacturer’s
recommended setting.
Stainless Steel
Part Number
Titanium
Part Number
M8 x 1.25mm Sprocket Nut
- Individual
LSSSPN8
TISPN8
M8 x 1.25mm Sprocket Nut
- Set of 6
SS6SPN8
TI6SPN8
M10 x 1.00mm Sprocket Nut
- Individual
(used on Ducati 1098)
LSSSPN10F
TISPN10F
M10 x 1.00mm Sprocket Nut
- Set of 6
(used on Ducati 1098)
SS6SPN10F
TI6SPN10F
M10 x 1.25mm Sprocket Nut
- Individual
LSSSPN10
TISPN10
M10 x 1.50mm Sprocket Nut
- Individual
LSSSPN10C
TISPN10C
M10 x 1.25mm Sprocket Nut
- Set of 5
SS5SPN10
TI5SPN10
M10 x 1.25mm Sprocket Nut
- Set of 6
SS6SPN10
TI6SPN10
M10 x 1.50mm Sprocket Nut
- Set of 6 (used on some
models of Aprilia)
SS6PN10C
TI6SPN10C
M12 x 1.25mm Sprocket Nut
- Individual
LSSSPN12
TISPN12
M12 x 1.25mm Sprocket Nut
- Set of 5
SS5SPN12
TI5SPN12
Description
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
SPROCKET NUTS BI-HEX
M OTORCYCLE PARTS
Italian inspired design. Titanium 12 point
Bi-Hex Sprocket Nuts. Available individually or
in sets of 5 and 6.
Description
Titanium
Part Number
Set of 5 - 10mm x 1.25 pitch Nut
TI5SPN10BH
Set of 6 - 10mm x 1.25 pitch Nut
TI6SPN10BH
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
53
TITANIUM PA RT S
AXLE NUTS & SWING ARM NUTS
T i t a nium
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Replace rusty originals with these light, bright and
sexy alternatives. In most cases, our Axle Nuts are
manufactured with a captive washer. For fitment
intended to a specific model of bike, please refer
to our model specific price list or website page.
The following table is provided as a list of Threads,
Thread Pitches, Socket Sizes and Heights.
S t a i n l e s s Ste el
ALL AVAILABLE IN POLISHED STAINLESS
Description
Thread
Pitch
Height
Flange
Diameter
Socket
Size
Titanium
Part Number
Axle Nut Flanged AF22
16mm
1.50mm
16mm
32mm
22mm
TINUT16150001
Stainless
Part Number
Axle Nut Flanged AF27
18mm
1.50mm
14mm
31mm
27mm
TINUT18150001
LSSNUT18150001
Axle Nut Flanged AF24
18mm
1.50mm
18mm
32mm
24mm
TINUT18150002
LSSNUT18150002
Axle Nut Flanged Castellated AF27mm
18mm
1.50mm
17.8mm
31mm
27mm
TINUT18150003
LSSNUT18150003
Axle Nut Flanged Castellated AF24
18mm
1.50mm
17.8mm
31mm
24mm
TINUT18150005
Axle Nut Flanged AF26
20mm
1.50mm
11.2mm
30mm
26mm
TINUT20150001
Axle Nut Flanged AF27
20mm
1.50mm
15.2mm
35mm
27mm
TINUT20150002
Axle Nut Flanged AF27mm
20mm
1.50mm
15.8mm
32mm
27mm
TINUT20150003
Axle Nut Flanged AF32
22mm
1.50mm
15mm
27mm
32mm
TINUT22150001
LSSNUT22150001
Axle Nut Flanged Castellated AF32mm
24mm
1.50mm
24mm
38mm
32mm
TINUT24150001
LSSNUT24150001
Axle Nut Flanged AF32
24mm
1.50mm
18mm
39mm
32mm
TINUT24150002
LSSNUT24150002
Axle Nut Flanged AF28 M25 (748/916/996)
25mm
1.25mm
33.3mm
33mm
28mm
TINUT25125001
Axle Nut Flanged AF30 (Ducati Monster 1000 Sie)
25mm
1.25mm
10mm
37mm
30mm
TINUT25125002
Axle Nut Flanged AF30
25mm
1.50mm
10mm
35mm
30mm
TINUT25150001
Axle Nut Flanged Plastic Nyloc AF32
25mm
1.50mm
13mm
37.7mm
32mm
TINUT25150002
Axle Nut Flanged AF36
25mm
1.50mm
18mm
43mm
36mm
TINUT25150003
Axle Nut Flanged Castellated AF32
25mm
1.50mm
21mm
38mm
32mm
TINUT25150004
Axle Nut Flanged AF36
30mm
1.50mm
12mm
44mm
36mm
TINUT30150001
Yamaha Swingarm Captive Nut (R1 ‘07-’08 Right Side)
32mm
1.00mm
11mm
45mm
34mm
TINUT32100001
Axle Nut Flanged AF41 (Ducati 748/916/996)
33mm
1.25mm
14.5mm
49mm
41mm
TINUT33125002
Axle Nut Flanged Castellated AF46 (748/916/996)
38mm
1.25mm
28mm
63mm
46mm
TINUT38125001
Axle Nut Flanged Bi-hex with Cone (Ducati 1098 AF61)
48mm
1.50mm
35mm
74mm
61mm
TINUT48150001
Axle Nut Flanged Bi-hex AF61 (MV Agusta)
48mm
1.50mm
35mm
75mm
61mm
TINUT48150002
Axle Nut Flanged Bi-Hex Castellated (MV Sprocket Side)
48mm
1.50mm
17.5mm
65mm
61mm
TINUT48150003
54
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
LSSNUT25150003
AXLE BOLTS & SLEEVES
T i t a n i um
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Axle Bolts bear the brunt of the elements
and salt water, therefore they corrode
quickly. Replace them with Stainless Steel
or our Titanium version.
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
Multi Fit SPECIALS
Stainless Steel
Part Number
Titanium
Part Number
Front Wheel Axle Bolt – M14 x 1.50mm – 22mm Socket Size
Fits many Honda Models
LSSSPH001
TISPHO01
Front Wheel Axle Bolt – M18 x 1.50mm – 22mm Socket Size
Fits Many Honda Models
N/A
TISPHO03
Stainless Steel
Part Number
Titanium
Part Number
N/A
TISPKAW11
Stainless Steel
Part Number
Titanium
Part Number
N/A
TISPTRI01
Description
Kawasaki SPECIALS
Description
Front Wheel Axle Sleeve
Fits Kawasaki ZXR636/ZX10R ‘06+
Triumph SPECIALS
Description
Front Wheel Axle Bolt / Swingarm Bolt
Fits Triumph Daytona/Speed Triple
MOTORCYCLE PARTS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
55
MOTORCY C L E PA RT S
Note: Below are common bolts used
by aftermarket wheel manufacturers.
However, fitment may vary, so please
use these profiles to compare with
your originals and verify.
DISC ROTOR BOLTS
BMW
BMW
Aftermarket PVM
Titanium - TIDISCBMW
Stainless Steel - LSSDISCBMW
Titanium - TIDISCBMW001
Stainless Steel - LSSDISCBMW001
Titanium - TIDISCPVM
Stainless Steel - N/A
M8
M8
M8
25
15
28
BMW
Aprilia/Ducati Allen Key
Aftermarket Braking
Titanium - TIDISCBMW002
Stainless Steel - LSSDISCBMW002
Titanium - TIDISCDUC10
Stainless Steel - LSSDISCDUC10
Titanium - TIDISCBRAKE10
Stainless Steel - N/A
M6
M8
M8
20
Ducati
Ducati
Aftermarket Braking
Titanium - TIDISCDUC20
Stainless Steel - N/A
Titanium - TIDISCDUC30
Stainless Steel - LSSDISCDUC30
Titanium - TIDISCBRAKE20
Stainless Steel - N/A
M8
M8
M8
20
Ducati
Ducati
Titanium - TIDISCDUC40
Stainless Steel - LSSDISCDUC40
Titanium - TIDISCDUC50
Stainless Steel - LSSDISCDUC50
M8
Aftermarket
Galespeed Front
Titanium - TIDISCGALE10
Stainless Steel - N/A
M8
20
M6
13
Honda Front
Honda Rear
Titanium - TIDISCHONFR
Stainless Steel - LSSDISCHONFR
Titanium - TIDISCHONRE
Stainless Steel - LSSDISCHONRE
M6
Aftermarket
Galespeed Rear
Titanium - TIDISCGALE20
Stainless Steel - N/A
M6
M8
24
56
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n i um
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
S t a i n l e s s S t eel
ALL AVAILABLE IN POLISHED STAINLESS
Many of these bolts are
suitable replacements
for Footrest Hanger Bolts
and Subframe Bolts.
Kawasaki
Titanium - TIDISCKAW
Stainless Steel - LSSDISCKAW
Kawasaki
Kawasaki
Titanium - TIDISCKAW20
Stainless Steel - N/A
Titanium - TIDISCKAW30
Stainless Steel - N/A
M8
M8
M8
Suzuki
Suzuki
Suzuki
Titanium - TIDISCSUZ
Stainless Steel - LSSDISCSUZ
Titanium - TIDISCGSXR
Stainless Steel - LSSDISCGSXR
Titanium - TIDISCSUZ10
Stainless Steel - LSSDISCSUZ10
M6
M8
M8
20
Triumph
Triumph
Titanium - TIDISCSUZ20
Stainless Steel - LSSDISCSUZ20
Titanium - TIDISCTRIFR
Stainless Steel - LSSDISCTRIFR
Titanium - TIDISCTRIRE
Stainless Steel - LSSDISCTRIRE
M8
M8
MOTORCYCLE PARTS
Suzuki
M8
22
Yamaha
Yamaha
Yamaha
Titanium - TIDISCYAM
Stainless Steel - LSSDISCYAM
Titanium - TIDISCR1R6
Stainless Steel - LSSDISCR1R6
Titanium - TIDISCYAM20
Stainless Steel - LSSDISCYAM20
M8
M6
M8
20
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
57
MOTORCY C L E PA RT S
CALIPER PARTS
T i t a nium
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Bleed Nipples
For those who value real attention to detail!
M7, M8 and M10 and special M8 for Ducati.
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
Description
Stainless Steel
Part Number
Titanium
Part Number
M7 x 1.00mm
LSSBN7
TIBN7
M7 x 1.00mm (Shallow)
LSSBN7KAW
TIBN7KAW
M8 x 1.25mm
LSSBN8
TIBN8
M8 Special Ducati x 1.25mm
N/A
TIBN8-DUCATI
M10 x 1.00mm
LSSBN10
TIBN10
Manufacturer
Front
Rear
Clutch
Honda
M8 x 1.25mm
M8 x 1.25mm
M8 x 1.25mm
Kawasaki
M7 x 1.00mm
M7 x 1.00mm
M8 x 1.25mm
Suzuki
M7 x 1.00mm
M7 x 1.00mm
M8 x 1.25mm
Yamaha
M8 x 1.25mm
M8 x 1.25mm
M8 x 1.25mm
Ducati
M8 x 1.25mm
M8 x 1.25mm
M8 x 1.25mm
Triumph - Late
M8 x 1.25mm
M8 x 1.25mm
M8 x 1.25mm
BMW Pre 1996
M10 x 1.00mm M10 x 1.00mm
BMW 1996+
M10 x 1.00mm
BMW K Models
M10 x 1.00mm M10 x 1.00mm
58
s a l e s 0044 (0) 1684 851940
Grub Screws
Pad Pin Grub Screw. Manufactured with
a 5mm allen key drive.
Titanium
Part Number
Stainless Steel
Part Number
TIPINGRUB
LSSPINGRUB
www.pro-bolt.com
T i t a n i um
Banjo Bolts
Available in Hex Head, double and single
sizes. Allen Key Drive versions are also
available in single 1.25mm pitch. Supplied
with Copper Washers.
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
Description
Stainless Steel
Part Number
Titanium
Part Number
Single Banjo M10 x 1.25mm
LSSBANJOS10
TIBANJOS10
Single Banjo M10 x 1.00mm
LSSBANJOS10F
TIBANJOS10F
Single Banjo M10 x 1.00mm
with Bleed Nipple
LSSBANJOS10FBN
TIBANJOS10FBN
Yamaha Single Banjo
M10 x 1.25mm Allen Key Drive
LSSBANJOS20
TIBANJOS20
Double Banjo M10 x 1.25mm
LSSBANJOD10
TIBANJOD10
Double Banjo M10 x 1.00mm
LSSBANJOD10F
TIBANJOD10F
MOTORCYCLE PARTS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
59
MOTORCY C L E PA RT S
CALIPER PAD RETAINING PINS
Internal fitment of Pad Pins are replicas of originals.
Our most popular Pins are supplied with an external
Hex Head, which has been drilled to allow for lockwire.
Nissin
Titanium - TIPINBP001
Stainless Steel - N/A
60
Nissin
Nissin
Titanium - TIPINBP002R
Stainless - SSPINBP002R
Titanium - TIPINBP003R
Stainless Steel - LSSPINBP003R
Tokico
Nissin
Titanium - TIPINBP004R
Stainless Steel - SSPINBP004R
Titanium - TIPINBP005R
Stainless Steel - SSPINBP005R
Nissin
Tokico
Titanium - TIPINBP006
Stainless Steel - N/A
Titanium - TIPINBP007
Stainless Steel - N/A
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n ium
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
S t a i n l e s s S t eel
AVAILABLE IN POLISHED STAINLESS
Sumitomo
Nissin
Titanium - TIPINBP008
Stainless Steel - N/A
Titanium - TIPINBP009
Stainless Steel - N/A
Tokico
Tokico
Titanium - TIPINBP010
Stainless Steel - N/A
Titanium - TIPINBP011R
Stainless LSSPINBP011R
Suzuki Own Make
Titanium - TIPINBP012
Stainless Steel - N/A
Titanium - TIPINBP014
Stainless Steel - N/A
Suzuki Own Make
Kawasaki
Titanium - TIPINBP015
Stainless Steel - N/A
Titanium - TIPINBP017
Stainless Steel - N/A
mm
10
20
30
40
50
60
70
80
90
100
110
MOTORCYCLE PARTS
Brembo
120
130
140
61
MOTORCY C L E PA RT S
CALIPER UPGRADES
T i t a nium
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Caliper Refurbishment Kits
Look after the most important part of your bike! These kits are
an excellent overhaul for your bike’s calipers – it makes sense
to change all caliper components when taking the time to
bleed the system.
Kit contains: Banjo Bolts, Bleed Nipples, Caliper Pins.
Part Number
Caliper
Fits model of bike
TIKITD1000
Brembo
Factory, RSV, Tuono
TIKITD1001
Brembo
748, 848, 916, 996, 998
TIKITD1003
Brembo
Brembo Aftermarket Racing, Mono Bloc, Radial Mount Calipers,
108 Centre to Centre Mounting Holes
TIKITD2000
Tokico
CBR600RR ‘05-’10, CBR1000RR 06-’10
TIKITD2001
Tokico
GSXR600 K4-K10, GSXR750 ‘04-’10, GSXR1000 ‘03-’08,
636 B1/B2 03-’04, ZX10R C1/C2 ‘04-05, 636 C1/C2 05-’06
TIKITD2002
Tokico
ZX10R ‘08-'10
TIKITD2003
Tokico
ZX6R ‘00-’02, ZX12R A1-A2 ‘00-’01
TIKITD2004
Tokico
ZX10R ‘06-’07
TIKITD2005
Tokico
ZX12 B1/B2 ‘02-’0
TIKITD2006
Tokico
GSXR600 K1-K3, GSXR750 Y - K3, GSXR750 K6/K7
TIKITD2007
Tokico
SV1000/S ‘03-’04, SV1000/S ‘05+, GSXR1000 K1/K2
TIKITD3000
Sumitomo
R6 99+, R1 ‘98+
TIKITD4000
Nissin
CBF600F ‘99-’05, CBR900RR ‘98-’03, SP1/SP2,
CBR1100XX Blackbird
TIKITD4001
Nissin
CBR900R ‘92-’97, CB900 Hornet ‘01-’05
TIKITD4002
Nissin
VTR1000 Firestorm ‘97-’01
TIKITD5000
AP
AP Racing, Mono Bloc, Radial Mount Calipers,
108 Centre to Centre Mounting Holes
TIKITD6000
Suzuki
GSF600 Bandit ‘00-’04, SV650 ‘03-’04, SV650S ‘03-’04
Race-Spec Radial Caliper Mount Bolt Kits
For standard or upgraded radial calipers – we've now made
it easier to order! All our Radial Caliper Kits are metric
10mm x 1.25mm fine pitch with pre-drilled heads for ease of
lock-wiring. Kits are available to order by length of required
bolt – measurements are taken from below the head.
Part Number
Set of 4 Bolts - Length of Bolt
measured from under the head
Kit Weight
TIFBRADIALRS55
Set of 4 Race Spec M10 x 55mm x 1.25mm
79gms
TIFBRADIALRS60
Set of 4 Race Spec M10 x 60mm x 1.25mm
84gms
TIFBRADIALRS65
Set of 4 Race Spec M10 x 65mm x 1.25mm
90gms
TIFBRADIALRS70
Set of 4 Race Spec M10 x 70mm x 1.25mm
97gms
TIFBRADIALRS75
Set of 4 Race Spec M10 x 75mm x 1.25mm
100gms
TIFBRADIALRS80
Set of 4 Race Spec M10 x 80mm x 1.25mm
107gms
62
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
UNSPRUNG OVERHAUL BOLT KITS
T i t a n i um
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
A selection of our most popular un-sprung bolts are
presented here in boxes. Bolts included are either Flanged
Hex Head or Tapered Socket Cap - the bolt heads replicate
the bike’s originals. Kits are available in Stainless Steel and
Titanium. Titanium Race Spec is also available for many
models. In our Race Spec Kits, we upgrade any Flanged Hex
Head Bolts in the Front Axle Pinch and Caliper Mount Bolts
to our Pre-drilled Race Spec Style.
Included are:
• Front & Rear Disc Bolts
• Sprocket Nuts
• Front Axle Pinch Bolts
• Front Caliper Mount Bolts
• Front Caliper Pinch Bolts (where applicable)
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
Titanium
RaceSpec
Fits
SSKITCAP120
SSKITCAP130
SSKITCAP150
SSKITCBMW047
SSKITCDU032
SSKITCDU032-1
SSKITCDU150
SSKITCDU045
SSKITCDU250
SSKITCHO098
SSKITCHO099
SSKITCHO212
SSKITCHO213
SSKITCHO214
SSKITCHO207
SSKITCHO217
SSKITCKA196
SSKITCKA190
SSKITCKA175
SSKITCKA286
SSKITCKA287
SSKITCSU077
SSKITCSU095
SSKITCSU094
SSKITCSU093
SSKITCSU148
SSKITCSU149
SSKITCSU152
SSKITCSU093
SSKITCSU173
SSKITCSU174
SSKITCSU165
SSKITCSU166
SSKITCSU163
SSKITCSU200
SSKITCSU205
SSKITCSU210
SSKITCSU250
SSKITCTR088
SSKITCYA282
SSKITCYA282-1
SSKITCYA283
SSKITCYA398
SSKITCYA399
SSKITCYA405
SSKITCYA406
SSKITCYA192
SSKITCYA193
TIKITCAP120
TIKITCAP130
TIKITCAP150
TIKITCBMW047
TIKITCDUC32
TIKITCDUC32-1
TIKITCDUC150
TIKITCDU045
TIKITCDU250
TIKITCHO098
TIKITCHO099
TIKITCHO212
TIKITCHO213
TIKITCHO214
TIKITCHO207
TIKITCHO217
TIKITCKA196
TIKITCKA190
TIKITCKA175
TIKITCKA286
TIKITCKA287
TIKITCSU077
TIKITCSU095
TIKITCSU094
TIKITCSU093
TIKITCSU148
TIKITCSU149
TIKITCSU152
TIKITCSU093
TIKITCSU173
TIKITCSU174
TIKITCSU165
TIKITCSU166
TIKITCSU163
TIKITCSU200
TIKITCSU205
TIKITCSU210
TIKITCSU250
TIKITCTR088
TIKITCYA282
TIKITCYA282-1
TIKITCYA283
TIKITCYA398
TIKITCYA399
TIKITCYA405
TIKITCYA406
TIKITCYA192
TIKITCYA193
TIKITCAP120R
Aprilia Factory 04-‘05
Aprilia RSVR Factory ’06-‘08
Aprilia RSV4 Factory ‘09
BMW S1000RR ‘10+
Ducati 748/916/996/998 (‘99+ Models)
Ducati 748/916/996/998 (Pre 99 Models)
Ducati 999
Ducati 848
Ducati 1098 / 1198
Honda CBR600RR ’05-‘06
Honda CBR600RR ‘07-‘10
Honda CBR1000RR ‘04-‘05
Honda CBR1000RR ‘06-‘07
Honda CBR1000RR ’08-‘10
Honda CB1000R ’08+
Honda VTR1000 SP1 / SP2
Kawasaki 636 ‘05-‘06
Kawasaki ZX6R ’07-‘08
Kawasaki ZX6 Ninja ’09-‘10
Kawasaki ZX10 ‘06-‘07
Kawasaki ZX10 ’08-‘10
Suzuki GSR600 2006
Suzuki GSXR600 K1-K3
Suzuki GSXR600 K4-K5
Suzuki GSXR600 K6-K7
Suzuki GSXR750 Y-K3
Suzuki GSXR750 K4-K5
Suzuki GSXR750 K6-K7
Suzuki GSXR750 K8-K9
Suzuki GSXR1000 K1-K2
Suzuki GSXR1000 K3-K4
Suzuki GSXR1000 K5-K6
Suzuki GSXR1000 K4-K8
Suzuki GSXR1000 K9-K10
Suzuki GSXR1300 Hayabusa ’99-‘07
Suzuki GSXR1300 Hayabusa ’08-‘10
Suzuki GSX1300 B-King ‘07+
Suzuki GSX1400 ’01-‘07
Triumph Daytona 675 ’06-‘08
Yamaha R6 ’03-‘04
Yamaha R6 ‘05
Yamaha R6 ’06-‘10
Yamaha R1 ’02-‘03
Yamaha R1 ’04-‘06
Yamaha R1 ’07-‘08
Yamaha R1 Big Bang ’09-‘10
Yamaha FZS1000 Fazer ’01-‘05
Yamaha FZS1000 Fazer ’06-‘10
mm
10
20
30
TIKITCDU032R
TIKITCDU032R-1
TIKITCDU150R
TIKITCDU250R
TIKITCHO098R
TIKITCHO099R
TIKITCHO212R
TIKITCHO213R
TIKITCHO214R
TIKITCHO207R
TIKITCHO217R
TIKITCKA196R
TIKITCKA190R
TIKITCKA286R
TIKITCKA287R
TIKITCSU077R
TIKITCSU095R
TIKITCSU094R
TIKITCSU093R
TIKITCSU148R
TIKITCSU149R
TIKITCSU152R
TIKITCSU093R
TIKITCSU173R
TIKITCSU174R
TIKITCSU165R
TIKITCSU166R
TIKITCSU163R
TIKITCSU200R
TIKITCSU205R
TIKITCSU210R
TIKITCTR088R
TIKITCYA282R
TIKITCYA282-1R
TIKITCYA283R
TIKITCYA398R
TIKITCYA399R
TIKITCYA405R
TIKITCYA406R
TIKITCYA192R
40
50
60
70
80
90
MOTORCYCLE PARTS
Stainless Steel
100
110
120
130
140
63
MOTORCY C L E PA RT S
POPULAR KITS
Front & Rear Caliper Mount Kit
Supplied in kit form with Copper Grease, these replace
the bolts that mount the caliper to the fork legs.
We use either Flanged Hex Head or Tapered Socket Cap
Bolts as appropriate when replacing the originals.
Where fitment allows, we also offer a 'Race-Spec'
version, where the heads are drilled for ease of
lockwiring.
Front & Rear Caliper Pinch Bolt Kit
These are the bolts that go through the caliper itself,
pinching the caliper together. We also
offer the special 'low head profile'
Brembo Caliper Pinch Bolts in
both Titanium and
Stainless Steel.
64
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n i um
Fork/Axle Bottom Pinch Bolts
Supplied in kit form with Copper Grease – these
replace the bolts at the bottom of the forks.
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Upgrade further to our amazingly low weight
Race-Spec bolts. Pre-drilled across the flats,
reduced socket size and scooped-out head for
maximum weight saving with no compromise in
strength and safety. These bolts are widely used by
top race teams. The most common size bolt – M8 x
40mm – weighs just 9.5gms in Titanium, compared
to 18.5gms of the average steel original.
S t a i n l e s s S t eel
ALL AVAILABLE IN POLISHED STAINLESS
Our most popular kit, four M8 x 40mm Race-Spec
bolts, weigh in at just 40gms.
MOTORCYCLE PARTS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
65
MOTORCY C L E PA RT S
Brake & Clutch Perch Pinch Bolt Kits
R
A AC NE
LU E W
M -SP
IN E
IU C
M
The bolts that pinch together the Brake and
Clutch Perches on the handlebars.
Handle Bar Bolt Kits
These bolts pinch the handlebar to the yoke or
forks for both retro and clip-on style.
66
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n i um
Top & Bottom Triple Clamp Bolt Kits
Supplied in kit form with Copper Grease – these
are the fork-to-yoke clamp bolts.
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
MOTORCYCLE PARTS
Rider & Pillion Footrest Hanger Bolt Kits
The bolts that mount the footrest hangers.
We offer sets for both front & rear.
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
67
MOTORCY C L E PA RT S
Scratch & Spark Set
For those who like to get down, you’ll get some serious
sparks from these! Titanium bolts, with your colour choice
of alloy collar. We offer 6mm & 8mm Bolts in 20mm
lengths. Other lengths can be supplied on request.
Part Number
Description
TISPARK6
Pair of 6mm Allen Key Drive Bolts with colour anodised collar
TISPARK8
Pair of 8mm Allen Key Drive Bolts With colour anodised collar
Subframe Bolt Kit
These are the bolts that hold the main sub-frame on.
Where necessary supplied with Washers and Nyloc Nuts.
68
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
SPECIAL PARTS
T i t a n i um
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
Also see our Axle Nuts, Disc Bolts & Caliper Pins.
Aprilia
S t a i n l e s s S teel
Part Number
Description
A TISPAP12
Titanium RSVR 2002-2003 Front Caliper Mount Bolt
- M10 x 1.25 x 28mm
B TISPAP14
Titanium RSVR/Other Rear Brake Pivot Bolt
BMW
The following parts are available in polished Stainless Steel
ALL AVAILABLE IN POLISHED STAINLESS
Part Number
Description
A LSSSPBMW03
Individual Frame Adjusting Nut – F800 series, 800S, 800ST
A SSSPBMW03-4
Set of 4 Frame Adjusting Nuts – F800 series, 800S, 800ST
B SSSPBMW04-8
Set of 8 Cylinder Head Rocker Head Cover Bolts & Washers – Boxer Engines
C SSSPBMW06-4
Set of 4 Cylinder Head Rocker Head Cover Bolts & Washers – Boxer Engines
D LSSSPBMW05
Wheel Bolt for Cast Wheels – M10 x 1.25mm x 40mm
D SSSPBMW05-5
Set of 5 Wheel Bolts for Cast Wheels – M10 x 1.25mm x 40mm
B
A
A
B
SPECI AL PARTS
D
C
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
69
SPECIAL PA RT S
A l l M a t e rials
Ducati
ALUMINIUM:
BLACK • BLUE • GOLD • GUNMETAL GREY
ORANGE • PURPLE • RED • SILVER
STAINLESS STEEL:
ALL AVAILABLE IN POLISHED STAINLESS
TITANIUM:
BLUE • GOLD • NATURAL • PURPLE HAZE
Aluminium
Part Number
Description
Fits Models
DUCAXLESET
Full set of 3 Axle Nuts
748/916/996/998
LDUCNUT40
Front Spindle Collar
848/1098
Stainless Steel
Part Number
Description
Fits Models
LSSSPDUC01
Front Caliper Pinch Bolt
M8 x 40mm - low head profile
748/916/996/998
Titanium
Part Number
Description
A TISPDUC01
748/916/996/998 - Front Caliper Pinch Bolt
B TISPDUC01-8
748/916/996/998 - Front Caliper Pinch Bolts - Set of 8
C TISPDUC03
748/916/996/998 - Rear Hub Pinch Bolt
D TISPDUC14
749/916/996/998 Side Stand Pivot Bolt
E TISPDUC40
1098 Rear Hub Pinch Bolt - M12 x 40mm
F TISPDUC37
1098 Swingarm Pivot Shaft & Nut
G TISPDUC23
Monster Footrest Hanger Bolt M10 x 47mm
H TISPDUC26
Monster Footrest Hanger Bolt M10 x 58mm
I TISPDUC24
Monster Footrest Hanger M10 x 37mm
J TISPDUCAXLESET
Full set of Axle Nuts
B
I
E
G
H
C
A
D
F
J
70
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n i um
Honda
Part Number
Description
A TISPHO95
CBR1000RR ‘04-’07 Swingarm Pivot Inner Nut Right Side
B TISPHO82
CBR1000RR ‘04-’07 Rear Subframe Dome Head Bolt
M8 x 16mm
C TISPHO73
CBR1000RR/VTR1000 ‘04-’07 Swingarm Lock Nut
Left Side 36mm
D TISPHO74
CBR600F4/RR ‘99-’06 Airbox Bolt
E TISPHO40
CBR600RR 03-04 Subframe Dome Head Bolt M10 x
1.25mm x 40mm
F TISPHO71
CBR600RR ‘03-’06/VFR800 ‘02-’07 Swingarm Pivot Nut
Right Side
G TISPHO38
CBR600RR/1000RR ‘03’-’05 Rear Sprocket Stud
H TISPHO38-6
CBR600RR/1000RR ‘03’-’05 Rear Sprocket Studs - Set of 6
I TISPHO19
NC30/NC35 - Rear Sprocket Stud - Each
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
E
A
F
G
H
C
I
D
B
SPECIAL PARTS
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
71
SP E CI A L PA RT S
Kawasaki
Part Number
Description
A TISPKAW01
Various - Footrest Hanger Bolt M8 x 30mm
B TIDISCYAM20
Various - Footrest Hanger Bolt M8 x 20mm
C TISPKAW05
Various -Footrest Hanger Bolt M10 x 30mm
C
A
B
MV Agusta F4
Part Number
Description
A TISPMV01
Front Axle Pinch Bolt - M10 x 32mm
B TISPMV06-2
Pair of Rear Hub Pinch Bolts M12 x 50mm set of 2
C TISPMV08
Side Stand Spring Bar
D TISPMV15
Front Caliper Pinch Bolt - M8 x 44mm
E TISPMV17
Frame Bolt with Shoulder - each
C
B
A
E
D
72
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
T i t a n i um
Suzuki
Part Number
Description
A TISPSU08
GSXR Cam Cover Pinch/Retaining Bolt
B TISPSU24
Bandit 600/1200 Rear Torque Arm Bolt
ALL AVAILABLE IN A CHOICE OF 4 COLOURS:
BLUE • GOLD • NATURAL • PURPLE HAZE
C TISPSU42
Suzuki M16 x 1.50mm Oil Bung
D TISPSU46
GSXR600/750/1000 K6/K7 Rear Brake Caliper
Slide Bolt - each
E TISPSU52
GSXR Right Side Swing Arm Pivot Nut
E
D
A
B
C
Yamaha
Description
A TISPYAM12
R6 1999-2002 Rear Brake
Caliper Slide Bolt
B TISPYAM14
R6 2003-2007/R12004-2008
Rear Caliper Slide Bolt
C TISPYAM21
R6 2005-2006/ R1 2004-2008
Front Brake Lever Pivot Bolt
D TISPYAM19
R1 2002-2003 Rear Caliper
Slide Bolt
E TISPYAM02
R1 Front Mudguard Bolt
M6 x 20mm
16mm Head Diameter
5mm Head Height
A
D
E
C
mm
10
20
30
40
50
60
70
SPECI AL PARTS
Part Number
B
80
90
100
110
120
130
140
73
ANCILLARY I T E M S
Aluminium Threaded Collars/Spacers
Part Number
Description
LCOLLAR5-7-3
5mm Threaded Collar - 7.5mm o/d - 3mm in Length
LCOLLAR5-7-5
5mm Threaded Collar - 7.5mm o/d - 5mm in Length
LCOLLAR5-7-10
5mm Threaded Collar - 7.5mm o/d - 10mm in Length
LCOLLAR6-8-3
6mm Threaded Collar - 8mm o/d - 3mm in Length
LCOLLAR6-8-5
6mm Threaded Collar - 8mm o/d - 5mm in Length
LCOLLAR6-8-10
6mm Threaded Collar - 8mm o/d - 10mm in Length
LCOLLAR6-10-6
6mm Threaded Collar -10.5mm o/d - 6mm in Length
LCOLLAR8-10-5
8mm Threaded Collar -10mm o/d - 5mm in Length
Steel Washers
Part Number
Description
LWASQR
Steel 'Grippa' Washers for M6 Quick Release Studs
Copper Washers
Part Number
Description
LWCOP10
M10 x 13.5mm O/d
Plastic Washers
Part Number
Description
LWAN4
M4 Fairing Plastic Washer
LWAN5
M5 Fairing Plastic Washer
LWAN6
M6 Fairing Plastic Washer
LWAN8
M8 Fairing Plastic Washer
LWACR6
M6 Countersunk Rubber Washer
LWACR8
M8 Countersunk Rubber Washer
LWASITEM
Washer for Suzuki Cam Cover Bolt
Plastic Tubing/Spacers/Collars
Part Number
Description
TUB5
M5 Spacer/Tubing
TUB6
M6 Spacer/Tubing
74
s a l e s uk 0044 (0) 1684 851940
www.pro-bolt.com
Backing Plates & Receptacles
Part Number
Description
CLIP2
M5 Chimney Nut / Slip On - 14mm width
CLIP5
M5 Chimney Nut / Slip On - 12mm width
CLIP1
M6 Chimney Nut / Slip On
CLIP4
M8 Chimney Nut / Slip On
CLIP6
Receptacle for Quick Release- Rivet On
CLIP3
Receptacle for Quick Release- Slide On
CLIP7
M5 Chimney Nut / Weld On
CLIP8
M6 Chimney Nut / Weld On
CLIP9
Race Fairing S Clip
CLIP-20
Race Fairing S Clip - Pack of 20
LWARQR
Plastic Washer for Quick Release Stud
LWASQR
Steel Grippa Washer for M6 Quick Release Stud
LRIVET3.2-6
Blind rivet 3.2mm diameter x 6mm length
Allen Keys
Part Number
AK1.5
AK2
AK2.5
AK3
AK4
AK5
AK6
Description
1.5mm Allen Key
2mm Allen Key
2.5mm Allen key
3mm Allen Key
4mm Allen Key
5mm Allen Key
6mm Allen Key
Rubber Well Nuts
Part Number
LRNUT4F
LRN5
LRN6
LRN6-25
LRN8
Description
M4 (0.5mm - Fine Pitch) Ducati Rubber Nut
M5 Rubber Nut - 13mm Length
M6 Rubber Nut - 15mm Length
M6 Rubber Nut - 25mm Length
M8 Rubber Nut - 28mm Length
Lockwire
mm
10
AN CI L L A RY I T E M S
Part Number
LOCKWIRE 51
LOCKWIRE 62
Supplied in 1 metre Lengths
Description
0.5mm Diameter
0.61mm Diameter
20
30
40
50
60
70
80
90
100
110
120
130
140
75
UNC STAIN L E S S S T E E L
FLANGED HEAD BOLTS
Won’t chip and peel like chrome! Our unique Flanged
Hex Head Bolts are machined with an attractive convex
dome to reflect the maximum light on a Hex Head
Bolt. They are also designed with a captive washer for
maximum effect. Polished to a mirror finish, supplied in
any quantity, or packs of 5.
Thread
Diameter
Pitch
Socket
Size
Max Head
Diameter
Lengths
Available
1/4”
20TPI
1/4”
0.390”
5/8”, 3/4”, 7/8”, 1”,
1-3/16”, 1-1/4”, 13/8”, 1-1/2”, 1-3/4”,
2”, 2-1/4”, 2-1/2”,
2-3/4”, 4”, 4-3/4”
5/16”
18TPI
5/16”
0.490”
3/4”, 1”, 1-1/4”,
1-1/2”, 1-3/4”, 2”,
2-1/4”, 2-1/2”
3/8”
16TPI
3/8”
0.618”
3/4”, 1”, 1-1/4”,
1-1/2”, 1-3/4”, 2”,
2-1/2”
SPIKE HEAD BOLTS
New Spike Head design unique to Pro-Bolt! Machined
to maximum length allowing for socket fitment and
finished with a captive washer. Polished to a mirror finish,
supplied in any quantity, or in packs of 5.
Thread
Diameter
Pitch
Socket
Size
Max Head
Diameter
Lengths
Available
1/4”
20TPI
1/4”
0.390”
5/8”, 3/4”, 7/8”, 1”,
1-3/16”, 1-1/4”, 13/8”, 1-1/2”, 1-3/4”,
2”, 2-1/4”, 2-1/2”,
2-3/4”, 4”, 4-3/4”
5/16”
18TPI
5/16”
0.490”
3/4”, 1”, 1-1/4”,
1-1/2”, 1-3/4”, 2”,
2-1/4”, 2-1/2”
3/8”
16TPI
3/8”
0.618”
3/4”, 1”, 1-1/4”,
1-1/2”, 1-3/4”, 2”,
2-1/2”
76
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
DOME HEAD BOLTS
U N C S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
Our Dome Head Bolts are ideal for use on Derby/Clutch
Cover or any bodywork. The attractive domed heads are
manufactured with the smallest possible allen key drive
for the most appealing cosmetic appearance. Polished to
a mirror finish, supplied in any quantity, or in packs of 5.
Thread
Diameter
Pitch
Allen Key
Drive
Max Head
Diameter
Lengths
Available
5/32”
32TPI
5/32”
5/16”
1/2”, 5/8”
1/4”
20TPI
1/4”
7/16”
1/2”, 9/16”, 5/8”,
11/16”, 3/4”, 2-1/2”
COUNTERSUNK BOLTS
Thread
Diameter
Pitch
Allen Key
Drive
Max Head
Diameter
Lengths
Available
1/4”
20TPI
1/4”
1/2”
5/8”
UNC STAINLESS STEEL
Countersunk Bolts are measured in length including the
head. We can supply countersunk washers separately
which are designed to be used with this type of bolt.
Ideal where a large diameter spread is required to
prevent bolts pulling through bodywork etc and where
a low head profile is essential. Polished to a mirror finish,
supplied in any quantity or packs of 5.
FLAT WASHERS
Precision manufactured Flat Washers, polished to a
mirror finish.
Size
Outside Diameter
Thickness
1/4”
5/8”
1/16”
1/4”
3/8”
1/16”
5/16”
11/16”
1/16”
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
77
SPECI AL PART S SUITAB L E F O R H AR L E Y- D AV I D SO N ® M OD E L S
IMPERIAL FASTENERS AND KITS SUITABLE
FOR HARLEY-DAVIDSON® MODELS
POLISHED
100% STEEL
STAINLESS
Replace rusted, damaged and dull bolts with our high grade stainless
steel versions. As with all our Stainless Steel, they are polished to a
mirror finish so will complement our Engine Casing Bolt range.
Engine Covers
We offer bolt kits for specific models - just choose your look from
either our unique Spike Head or Flanged Hex Head!
Kits are available for Primary Covers, Transmission Covers, Cam
Covers, Lifter Block Covers, Rocker Box Covers and Gearcase/Front
Sprocket Covers.
All our fasteners exceed D.O.D, M.O.T and factory standards.
Engine Cover Boxed Sets
Transform the look of your bike with our Boxed Sets which enable
you to replace lost, corroded or simply dull fasteners and achieve a
superior look.
Fitment is easy - remove one bolt at a time, and replace with the
identical length bolt from your Pro-Bolt kit, apply the Threadlock
provided and torque to your manufacturers recommended setting.
Special Parts suitable for Harley-Davidson® Models
To continue the look, we supply a number of special parts
which are generally universal across a wide range of models.
Stock Code
Description
Thread Diameter
Threads Pitch Length
Qty Per Pack
LSSDISCHDUNC210
Front Disc Bolt - Button Head
5/16"
18 tpi
7/8"
1
LSSDISCHDUNC312
Rear Disc Bolt - Button Head
3/8"
16 tpi
1"
1
SSHD46646-05
Front Disc Bolts - Set of 5
5/16"
18 tpi
7/8"
1 Pack = 5 Pieces
SSHD46647-05
Rear Disc Bolts - Set of 5
3/8"
16 tpi
1"
1 Pack = 5 Pieces
LSSSPHD02
Head Bolt - Individual Bolt
3/8" UNC Internal Thread
16 tpi
1 7/8"
1
LSSSPHD03
Head Bolt - Individual Bolt
3/8" UNC Internal Thread
16 tpi
3 1/6"
1
SSHDHEADBOLT
Head Cover Bolt Kit (4 Long & 4 Short) 83-'06 Twin Cam/Big
Twin and -('07-'10 1584) (TC88, TC96 and TC96B)
1 Pack = 8 Pieces
SSHD41843-08
Front Banjo Bolt Set 06 VRSC/'08 Touring
1 Pack = 7 Pieces
78
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
S t a i n l e s s S teel
ALL AVAILABLE IN POLISHED STAINLESS
Imperial Workshop Boxes
For large scale projects or just a convenient source of
replacements, we supply workshop boxes comprising of
the most widely used fasteners.
Exact contents are available on-line and can be amended if
desired - with the agreement of Pro-Bolt.
Stock
Code
Description
Qty
Per Pack
WSBOX155UNCHXSS
Stainless Steel UNC Workshop Box
- Flanged Hex Head Bolts
155
WSBOX155UNCSKSS
Stainless Steel UNC Workshop Box
- Spike Head Bolts
155
WSBOX200UNCMIXSS
Stainless Steel UNC Workshop Box
- Flanged Hex Head and Spike Head Bolts
200
WSCAB500IMPSS
Stainless Steel UNC Workshop Cabinet
- Flanged Hex Head Bolt, Spike Head Bolts and Washers
500
HARLEY-DAVI DSON MODELS ®
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
79
WORLDWI D E D I S T R I B U T O R S
Pro-Bolt Worldwide
Europe
Austria
Bulgaria
Belgium
Croatia
Cyprus
Czech Republic
Czech Republic
Denmark
Estonia
Finland
France
Germany
Germany
Germany
Greece
Hungary
Ireland
Italy
Latvia
Lithuania
Malta
Netherlands
Netherlands
Netherlands
Norway
Norway
Norway
Poland
Poland
Poland
Portugal
Romania
Russia
Slovakia
Slovenia
Spain
Sweden
Sweden
Switzerland
Switzerland
Turkey
Ukraine
Business Opportunity Available
Business Opportunity Available
Bike Design Belgium
Business Opportunity Available
J L Motorace Ltd
Bikers Crown
Prorace System
Pro-Bolt Denmark
Business Opportunity Available
Sportbike Uskola Ltd
Pro-Bolt France
Custom Chrome Europe
Pro-Bolt Germany
Team Metisse GMBH
Moto Shop Grigorios Yiatilis
X - Bikes
Business Opportunity Available
Faster96 srl
Business Opportunity Available
Business Opportunity Available
M A Motorcycle Centre
Pro-Bolt Holland
Ten Kate Racing Products
Zodiac International
PitStop Motorcyle Import
Bikerman AS
FN Sykkel (Cycle Parts)
Dyno-Tech
Sime Promotion (Cycle Parts)
Vincere Piotr Ulicki (Cycle Parts)
Full Control Motos
Business Opportunity Available
Business Opportunity Available
Business Opportunity Available
Business Opportunity Available
Totimport
Bikersneed Sweden
Boove Aktiebolag
Pro-Bolt Switzerland
Suter Racing Technology
Business Opportunity Available
Business Opportunity Available
0044 1684 851940
0044 1684 851940
0032 5245 3361
0044 1684 851940
00357 22752234
00420 495 484 255
00420 608 346650
0045 33228070
0044 1684 851940
00358 41 546 2704
See website for details
0049 671 888880
0049 21193 85270
0049 5373 9240 780
0030 210 921 4315
0036 1405 6653
0044 1684 851940
0039 0517 26849
0044 1684 851940
0044 1684 851940
00356 491790
See website for details
0031 529488815
0031 297 28 86 21
0047 91126731
0047 51 53 83 73
0047 997 13 354
0048 608 655 130
0048 502498640
0048 500 014 768
00351 961 414 913
0044 1684 851940
0044 1684 851940
0044 1684 851940
0044 1684 851940
0034 966 850 547
0046 707 135272
0046 8 7610266
0041 793738087
0041 523971060
0044 1684 851940
0044 1684 851940
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Pro-Bolt USA
Tucker Rocky Distributing
Business Opportunity Available
Business Opportunity Available
Blue Streak Racing
Business Opportunity Available
2 Ruedas Distributor
1888 251 1644
001 817 258 9241
0044 1684 851940
0044 1684 851940
001 519 878 9866
0044 1684 851940
001 787 735 4671
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Pro-Bolt South Africa
0027 218 560 448
info@ pro-bolt.co.za
0061 397925025
00687 779 177
0064 7 5779870
0064 9 5797424
[email protected]
[email protected]
[email protected]
[email protected]
Business Opportunity Available
Business Opportunity Available
Reshef-Tech
Pro-Bolt Japan
Pacmax
0044 1684 851940
0044 1684 851940
00972 8 8672621
0081 566 62 8605
0081 476 35 2680
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
Business Opportunity Available
Business Opportunity Available
Biketech 21
MPK Concept
0044 1684 851940
0044 1684 851940
0065 6392 1230
0066 26115679
[email protected]
[email protected]
[email protected]
[email protected]
North & South America & Canada
America
America
Argentina
Brazil
Canada
Mexico
Puerto Rico
Africa
South Africa
Australia & New Zealand
Australia
New Caledonia
New Zealand
New Zealand
Pro-Bolt Australia
Zone Rouge Sarl
NZ Streetfighters Ltd
Prescott Engineering
Middle/Far East
Dubai
India
Israel
Japan
Japan
South East Asia
Indonesia
Malaysia
Singapore
Thailand
80
s a l e s 0044 (0) 1684 851940
www.pro-bolt.com
DISPLAY STANDS
We offer a variety of lightweight, pop-up display
stands, developed to hold a range of stock options
to suit most dealers. We would also be happy to
customise a specific display.
For more details please email [email protected].
PRO-BOLT WORLDWIDE
Pro-Bolt has global websites based in
many countries around the world, offering
local sales support and advice using local
language and currency.
The list of countries is
constantly growing –
please see our
main website
www.pro-bolt.com
for details.
mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
81
TITANIUM PA RT S
PRO-BOLT WORLDWIDE
We have websites in the following countries, where you will find
local languages, local currency and local support:
Australia
www.probolt-australia.com
Denmark
www.probolt.dk
France
www.probolt-france.com
Germany
www.probolt-germany.com
Japan
www.probolt-japan.com
South Africa
www.probolt.co.za
Switzerland
www.pro-bolt.ch
United States
www.probolt-usa.com
Visit our main website www.pro-bolt.com for latest information
82
Pro-Bolt Ltd, Unit F, 6400 Severn Drive, Tewkesbury Business Park, Tewkesbury, Glos GL20 8SF. UK
s a l e s 0044
851940
www.pro-bolt.com
Tel: 0044 (0)
(0)16841684
851940 Fax:
0044 (0) 1684 850080
Email: [email protected] Online: www.pro-bolt.com

Similar documents

probolt catalogue 2011 2nd edition.indd

probolt catalogue 2011 2nd edition.indd Rider & Pillion Footrest Hanger Bolt Kits.................................................... 67

More information