MINI skimer „MARINE SS“ - LUXE Pools. The Luxury Pools

MINI skimer „MARINE SS“
• The water collector is made of stainless steel - AISI 316
• For pool water up to 30 cubes.
• Suitable for salt water pools.
• All open skimmer are resistant to UV rays.
• Recommended maximum flow of 6000l / h.
• 50 mm diameter of the pump.
Fiberpool.EU, Zirmunu str 68 Vilnius LT – 09124, Lithuania Tel.00 370 65566556, VAT No: LT100003253619
www.luxe-pools.com
View from the side
View from the front
View from the top
• Mounted ~ 5cm from the pool surface, leaving a pool filled with
~ 15 cm to the edge of the water collector.
Fiberpool.EU, Zirmunu str 68 Vilnius LT – 09124, Lithuania Tel.00 370 65566556, VAT No: LT100003253619
www.luxe-pools.com
Standart skimer „MARINE SS“
• The water collector is made of stainless steel AISI 316
• Pools of water up to 30 cubes.
• Suitable for salt water pools.
• All open skimmer are resistant to UV rays.
• Recommended maximum flow 10.000l / h.
• 50 mm diameter of the pump.
• Shopping cart attached to the base.
• Mounted ~ 5cm from the pool surface, leaving a pool filled
with ~ 15 cm to the edge of the water collector.
View from the front
Side layer
View from the side
View from the top
Fiberpool.EU, Zirmunu str 68 Vilnius LT – 09124, Lithuania Tel.00 370 65566556, VAT No: LT100003253619
www.luxe-pools.com
Wide skimer „MARINE SS“
• The water collector is made of stainless steel - AISI 316
• For pool water up to 40 cubes.
• Suitable for salt water pools.
• All external parts of the water collector is resistant to UV rays.
• Pump connector Ø 50 mm.
• Recommended maximum water flow 10.000l / h.Brėžiniai:
View from the side
View from the front
View from the top
Ultra wide skimer „MARINE SS“
• The water collector is made of stainless steel
- AISI 316
• For pool up to 40 cubes.
• Suitable for salt water pools.
• The minimum water level in the basin must
be at least 5 cm from the curb surface.
• All open skimmer are resistant to UV rays.
Fiberpool.EU, Zirmunu str 68 Vilnius LT – 09124, Lithuania Tel.00 370 65566556, VAT No: LT100003253619
www.luxe-pools.com
• Recommended maximum flow 12.000l / h.
• 50 mm diameter of the pump.
• Shopping cart attached to the base.
View from the side
View from the front
View from the top
Perspective view
• Water collector uses: water collector pasiurbia water from the basin and supplying it to the
filter, which is then returned through the nozzle, and thus trigger a vicious circle.
• Mounted ~ 5cm from the pool surface, leaving a pool filled with ~ 15 cm to the edge of the
water collector.
Fiberpool.EU, Zirmunu str 68 Vilnius LT – 09124, Lithuania Tel.00 370 65566556, VAT No: LT100003253619
www.luxe-pools.com
Inlet „MARINE SS“
• Made of stainless steel - AISI 316
• Suitable for salt water pools.
• Recommended maximum flow of 4500l / h
• Switched to 50 mm. diameter pipe.
View from the side
View from the top
Perspective view
• Nozzle purpose is to restore the water prafiltruotą back into the pool.
• Montojamas maximum height of 50 cm from the edge of the basin.
Fiberpool.EU, Zirmunu str 68 Vilnius LT – 09124, Lithuania Tel.00 370 65566556, VAT No: LT100003253619
www.luxe-pools.com
Main drain „Marine S.S“
Circular main drain with a round lid.
• Made of stainless steel - AISI 316
• Switched no closer than 30cm from the pool wall.
• Switched to a 50 mm diameter pipe whose other end is
connected to the pump.
• Suitable for salt water pools.
• Maximum flow: 13000 m3 / h.
Fiberpool.EU, Zirmunu str 68 Vilnius LT – 09124, Lithuania Tel.00 370 65566556, VAT No: LT100003253619
www.luxe-pools.com
View from the side A
View from the side B
View from the top
Perspective view
• boarding purposes: to drain the water, in case you want to clean the pool, or to connect the
bottom of the air massage "VULKAN.
• Quickly sucked up water.
Fiberpool.EU, Zirmunu str 68 Vilnius LT – 09124, Lithuania Tel.00 370 65566556, VAT No: LT100003253619
www.luxe-pools.com