Borum City - BM 250 - Borum Industri A/S

Borum City - BM 250
- it's straightforward
Borum City - BM 250
Borum City BM 250 is the ideal machine for working in narrow
city streets. It can turn on a dime with its 2 front wheels
Application Methods:
mounted close together.
Data for Borum City BM 250, basic
equipment:
Engine
Water-cooled, 4-cylinder diesel
engine, 2197 cm³.
36 kW (49 HP) @ 2800 rpm.
Compressor
Oil-cooled screw compressor. Total
1800 L/min. at 10 bar. Air safety
valve with silencer.
Chassis
Stable double profile frame
construction.
Motor, compressor and hydraulic
pump are mounted in one unit on
vibration dampers.
Transmission
Hydrostatic, infinitely variable
transmission 0-15 km/h.
Guide rod
Stabilised against vibrations and
adjustable in all directions.
Easy handling.
Hydraulic pump
Hydraulic piston pump with
integrated servo control 28 cm3.
Wheel motors
Piston motors with integrated
parking brake.
Hydraulic oil tank
40 Litres.
Fuel tank
50 Litres.
BM MULTI FUNCTION
Automatic control for 1 Line
system, 3 Line system and 3 Line
Compact Marking System
5 modes individually for Extrusion
of Thermoplastic.
Control of up to 20 shutters with
fast change of shutter and pump
settings including easy adjusting
of delay for shutters, spray, paint
and bead guns.
Speed proportional control of
road marking sequence including
material feed, material pattern
and thickness.
The waterproof control panel is
equipped with raised buttons
marked with individual symbols
for easy operation.
Display for line length, gap,
speed, working hours and total
marking distance.
Optional remote start/stop
function.
10 markings can be
preprogrammed
Paint
Standard: RAL 1007.
Main dimensions + weight
Length: 3150 mm.
Width: 1690 mm.
Height: 2400 mm
(incl. rotating warning light)
Weight: 2340 kg.
(Thermoplastic version)
Borum City, BM 250-2, is
developed to work with one of the
following application methods.
Equipment to be mounted on the
machine according to your
specific need.
Click on the below link to see the
data:
Thermoplastic Extruder (T)
Thermoplastic Spray with
Pressure Tank (SP)
Pressurized Cold Paint - 1 tank
(C)
Options:
Bead gun system
Please see data sheet on guns
Guns and bead guns
Premark system
Electronically controlled premark
system with telescopic foundation
and ground distance wheel.
Cone Rack
With seat
Hydraulic broom or air knife
For sweeping the road prior to
marking; mounted just in front of
the marking unit.
Modification rights reserved.
Bead tank
Bead capacity 55 L/95 kg.
Operator section
The control panel, pneumatic
section, electronics, steering wheel
and instruments are connected to
the driver’s seat.
Gauges
Oil pressure.
Water temperature.
Diesel oil.
Working hour counter
Borum International A/S
Højvangsvej 10
Hadbjerg
DK-8370 Hadsten
Phone +45 8761 3213
Fax +45 8761 3214
[email protected]
www.borum.as
Electrical system
12 V/85 Amp system. Warning
lights, rear lights, front lights, battery
and relays.
Engine bonnet
Easy access for service.
- it's straightforward