Präsentation BIG5 - SOLID GYPSUM MIDDLE EAST

Transcription

MultiGips.
SolidGypsumME
Solid. Light. Favorable.
Drywall Construction with
MultiGips gypsum blocks
VG-Orth GmbH & Co.KG
Dubai BIG5
MultiGips gypsum blocks 11.2009
MultiGips.
SolidGypsumME
Dubai BIG5
MultiGips.
SolidGypsumME
production
Dubai BIG5
MultiGips.
SolidGypsumME
Gypsum
blocks were
invented in
1886
Dubai BIG5
MultiGips.
SolidGypsumME
MultiGips gypsum blocks consist of
water and gypsum
Gypsum is free of harmful substances
Dubai BIG5
MultiGips.
SolidGypsumME
The gypsum is set after
filling the flasks within
only a few minutes.
Dubai BIG5
MultiGips.
SolidGypsumME
Modern production
facilities ensure a high,
uniform quality standard
and functionality of the
gypsum blocks
Dubai BIG5
MultiGips.
SolidGypsumME
Gypsum blocks are subsequently dried in
ovens
After the drying time all gypsum blocks
will be packed in foil for secure storing
A sustainable wall building material is
generated, which can be residue-free
recycled at the end of its life cycle!
Dubai BIG5
MultiGips.
SolidGypsumME
technics
Dubai BIG5
MultiGips.
SolidGypsumME
Gypsum blocks
according to EN 12859
Solid construction
for light non-loadbearing walls at interior
work
No mortar and no
plastering needed
Combines benefit of
 Solid drywall construction
Dubai BIG5
MultiGips.
SolidGypsumME
• Medium density (md)
approx. 850 kg/m3
• Natural white
• thickness
60,70, 80 and 100 mm
• Standard format *
666 x 500 mm
• Block requirement with standard
Dubai BIG5
MultiGips.
SolidGypsumME
Favored for use in domestic kitchens
and bathrooms
Hydrophobically treated through and
through to a water-repelling finish
Ideal for kitchen walls also because of
the solid structure
Dubai BIG5
MultiGips.
SolidGypsumME
For special demands in sound
insulation
High density (hd) approx. 1.200 kg/m³
Red coloured for indentifaction
Format 100x500x500 mm
Block requirement
4 blocks per sqm
Dubai BIG5
MultiGips.
SolidGypsumME
7.000 mm
Permitted wall dimensions
Permitted wall dimensions for walls, which are at
least attached top and bottom, have any desired wall
length and may have large openings
6.000 mm
5.000 mm
Installation area 1:
low gatherings of people,
i.e. apartments, hotel- und
office-rooms
4.000 mm
3.000 mm
Installation area 2:
high gathering of people,
i.e. schools, exhibition- and
sales-rooms
2.000 mm
1.000 mm
0
Dubai BIG5
MultiGips.
SolidGypsumME
Quiet Walls
Dubai BIG5
MultiGips.
SolidGypsumME
Sound transmission by rigid
connected flanking partition
walls
Not decoupled building units
activate themselves
Undamped disturbing sound
went through so-called byways
Dubai BIG5
MultiGips.
SolidGypsumME
Quiet Walls
Dubai BIG5
MultiGips.
SolidGypsumME
Sound transmission by
elastic decoupled partition
walls with MultiGips gypsum
blocks
through optimized border
bedding with MultiGips
AkustikPro 120
Reduced sound
transmission
through byways
 Light but quiet walls
Dubai BIG5
MultiGips.
SolidGypsumME
Quiet partition walls, because of
Elastic connection
MultiGips AkustikPro 120
decoupled partitions walls to
adjacent walls, ceilings and
floors, and reduce sound
transmission through adjacent
building units
solid
reduce the direct sound
transmission between rooms
active
Dubai BIG5
MultiGips.
SolidGypsumME
Airborne sound transmission
Thickness
(mm)
Gross density
DIN EN 12859
1)
Grammage of
wall
(kg/m2)
Accoustic
insulation
with designs
with edge
strips of
AkustikPro
120
3 mm
RW,P (dB) 2)
Accoustic
insulation
with designs
with edge
strips of
cork
5 mm
RW,P (dB) 2)
Accoustic
insulation
with designs
with edge
strips
rockwool
13 mm
RW,P (dB) 2)
Single-leaf walls
60
Medium density
54
33
80
Medium density
72
37
100
Medium density
90 1) Medium density: 800kg/m
40 ≤ ρ < 1.100 kg/m37
38≤ ρ ≤
, high density 1.100 kg/m
High density
3
3
3
1.500 kg/m3
3)
2) Sound transmission values by construction according to test certificate RW,P: sound
reduction index measured at test bench; calculated value RW,R = RW,P - 2 dB. Without
conduct through adjacent units
3) By elastic connection with bitumen felt stripes according to test certificate
120
Dubai BIG5
46
40
MultiGips.
Thickness
(mm)
Wall construction
SolidGypsumME
1)
Wall
thick-ness
Grammage of the wall
(kg/m2)
Accoustic insulation
with designs with
edge strips of
AkustikPro 120
3 mm
RW,P (dB) 2)
Accoustic insulation
with designs with
edge strips of
Bitumen-felt
3 mm
RW,P (dB) 2)
Douple-leaf walls
100
12,5
30
Gypsum block (hd)
Plaster board plus
Mineral wool
150
136
52
80
25
10
60
Gypsum blocks (md)
MW Heralan-TP or equal
Air gap
Gypsum block (md)
175
128
61
80
40
10
80
Gypsum block (md)
MW Heralan or equal
Air gap
Gypsum block (md)
210
146
60
70
80
5
70
Gypsum block (md)
Heralan DPF50
Air gap
Gypsum block (hd)
225
146
72
1) + 2) in front
Dubai BIG5
MultiGips.
SolidGypsumME
Loads and installations
Homogeneous design, solid cross-section
No thoughtfulness to spacing or separations
Light and heavy console loads could be fit
assuredly everywhere
Using of normal commercial anchors
Also for fitting of wash basins
Wall-suspended toilets with carrier supports
in double-leaf installation walls or facing
formwork are recommended
Dubai BIG5
MultiGips.
SolidGypsumME
•Electrical- and data lines or similar can be
installed very easily and discretely.
•Slits for cables will be milled out, a drill bit is
used for electrical sockets.
•Under no circumstances chisel out slits and
sockets holes!
Certified German installation items for fire
protection approved for doors, hatches,
separations form i.e. Herholz, RUG, Wichmann
VG-Orth
Dubai BIG5
etc. GmbH & Co.KG
MultiGips.
SolidGypsumME
Attached Fire drencher
Gypsum
is mineral and not combustible
(building material class A1 according to DIN
4102)
Don‘t heighten the fire load when happening
Contribute against fire with its chemical
combined
water
Dubai BIG5
MultiGips.
SolidGypsumME
Partition- and shaft walls with fire protection
requirements
According to DIN 4102-4 classified
(see schedule subsequent)
No test certificate, no admittance necessary*
fire resistant without additional plastering
Fitting of electric installations / sockets
without restriction (not oppositely)
Same fire resistance in all directions,
therefore best adapted for shaft walls
* For German regulations
Dubai BIG5
MultiGips.
SolidGypsumME
Fire resistance class for
Single-leaf partition- and shaft walls
60 mm F 30-A
80 mm F 120-A
100 mm
F 180-A
F 30 fire retardant F 60 very fire retardant F 90 fire resistant
Dubai BIG5
MultiGips.
SolidGypsumME
Advantages in Use
Dubai BIG5
MultiGips.
SolidGypsumME
Stable solid walls with high resistivity
Economical large format elements for a
quick construction period
Benefit of floor space through thin units
Late Fixings of room layout possible
Tolerant compared to changing of
constructor wishes
Dubai BIG5
MultiGips.
SolidGypsumME
Ready-finished surfaces without plastering
(barely any moisture input)
High sound reduction through elastic edge
mounting
High fire resistance
(Building material class A1 in accordance to
DIN 4102; not combustible)
Door openings or loads can be positioned
freely regardless of support separations
and spacing
Dubai BIG5
MultiGips.
SolidGypsumME
• Highest execution security through
certified working
• User friendly because of
dimensionally stable units
(groove-tongue-profile)
• Hydro-blocks and/or -socket
against raising damp
• Visual quality control (no covered
building units)
• Quality levels for surface finishes
Dubai BIG5
MultiGips.
SolidGypsumME
What you see is what you get:
• At any desired place you could drill and arm
with normal commercial anchors
• Clear design without static restriction
• Easy adjustment to changing phase of life
and habits or use
Dubai BIG5
MultiGips.
SolidGypsumME
Gypsum has its points:
• Natural element: calcium sulfate and
chemically combined water
• Gypsum is a recommendable
biological building material
• Through mineral basic substances
inured to microorganisms
• No risks for triggering allergies
• Low thermal conductivity
(0,41 W/mk)
Dubai BIG5
MultiGips.
SolidGypsumME
Working
Dubai BIG5
MultiGips.
SolidGypsumME
• One building material only a few components
• Definite Wall details and Connection details
• little sources of error
• accelerated project
• rapidly building process
Dubai BIG5
MultiGips.
SolidGypsumME
Mark position of connections stripes using chalk line
Dubai BIG5
MultiGips.
SolidGypsumME
Protection film of Akustik Pro 120 s.a. remove and stick it
Dubai BIG5
MultiGips.
SolidGypsumME
Position of the partition wall on all sides
Dubai BIG5
MultiGips.
SolidGypsumME
… be marked
Dubai BIG5
MultiGips.
SolidGypsumME
Apply gypsum adhesive bed and also to face of gypsum block
Dubai BIG5
MultiGips.
SolidGypsumME
Block applies to connections stripes and tie positively the row
Dubai BIG5
MultiGips.
SolidGypsumME
Correction of position of first row; carry forward wall build up with bond and…
Dubai BIG5
MultiGips.
SolidGypsumME
… gypsum adhesive setting slightly
Dubai BIG5
MultiGips.
SolidGypsumME
Remove gypsum adhesive before setting and close slits and joints completely
Dubai BIG5
MultiGips.
Doors overlap with bond
SolidGypsumME
Ceiling gap approx. 3-4 cm height
Dubai BIG5
MultiGips.
SolidGypsumME
Wet the ceiling gap and close with FG 70 filling gypsum
Dubai BIG5
MultiGips.
SolidGypsumME
Cut off overhang of edge stripes on all sides
Dubai BIG5
MultiGips.
SolidGypsumME
Dubai BIG5
MultiGips.
SolidGypsumME
Material consumption
Material
Approx.
Unit
Quantity
(60, 70, 80 + 100mm)
m2
1,0
MultiGips adhesive
kg
1,5 – 3,0
kg
2,0 – 3,0
kg
0,9
mtr
1,3
Connections/Slits/openings:
MultiGips FG 70 Füllgips
Finish/Smoothing: MultiGips
CasoFill® UNI
Edge connection stripes: AkustikPro
120/s.a. VG-Orth
(alter.GmbH
Cork& Co.KG
or bitumen
felt)
Dubai BIG5
MultiGips.
SolidGypsumME
Surfaces
Dubai BIG5
MultiGips.
SolidGypsumME
• Gypsum blocks are smoothed
simply in the area of joints or
completely for very high optical
demands.
• Economical smoothing with
CasoFill® Uni
• All normal dispersions-, latex-, oil
or enamel paints are suitable.
• Walls which receive a facing of tiles
Dubai BIG5
MultiGips.
SolidGypsumME
Made in Germany - Made for the World
Dubai BIG5
MultiGips.
SolidGypsumME
References
Dubai BIG5
MultiGips.
Westend Ottensen Hamburg VG-Orth GmbH & Co.KG
SolidGypsumME
Dubai BIG5
Desired housing estate with urban style
MultiGips.
Westend Ottensen Hamburg VG-Orth GmbH & Co.KG
SolidGypsumME
Dubai BIG5
Desired housing estate with urban style
MultiGips.
ParkQuartier Berg Stuttgart
SolidGypsumME
Urban, exclusive city living with approx. 200 living units
Dubai BIG5
MultiGips.
ParkQuartier Berg Stuttgart units
SolidGypsumME
Urban, exclusive city living with approx. 200 living
Dubai BIG5
MultiGips.
Qwaterwest Frankfurt am Main
SolidGypsumME
Dubai BIG5
MultiGips.
Qwaterwest Frankfurt am Main
SolidGypsumME
Dubai BIG5
MultiGips.
Practice for oculists in mid of Germany
SolidGypsumME
Dubai BIG5
MultiGips.
Doctors practice in Munich
SolidGypsumME
Dubai BIG5
MultiGips.
SolidGypsumME
If you have any questions don‘t hesitate to contact us here at BIG5
or under
SoildGypsum Middle East
Al Ghandi Building Materials Company
MultiGips
Achatstrasse 1
D - 09356 St. Egidien
T +49 37204 72418
F +49 37204 72421
M [email protected]
W www.solidgypsumme.com
PO Box 1034
Dubai - UAE
T +971 4 266 0045
F +971 4 2685233
M [email protected]
Holeburgweg 24
D - 37627 Stadtoldendorf
T +49 5532 505 - 100
F +49 5532 505 - 560
M [email protected]
W www.multigips.com
Dubai BIG5

Präsentation BIG5 - SOLID GYPSUM MIDDLE EAST

Transcription

Similar documents

Hotel Sonnenhof Kleinaspach

W131 Knauf Brandwände