Ibico Kombo Binder

Transcription

Ibico Kombo Binder
Toll Free: 800-658-8788
Fax: 801-927-3037
[email protected]
Ibico Kombo Binder
Installation and Set-up
Carefully unpack and inspect your new Ibico plastic binding machine for shipping damage. If any damage
is noticed it should be brought to the immediate attention of the delivery carrier. Place the machine on a
suitable table close to an easily accessible 115 volt outlet. The following instructions will demonstrate
certain methods and techniques to improve your binding results. Before using the machine carefully read
through these instructions.
This machine is designed to punch up to 12 sheets of common photo copy paper. Cover materials vary in
thickness and composition; as a rule, covers should be punched two at a time separate from the document.
Some brands of clear plastic covers and sheet protectors do not punch cleanly and may damage the
machine. All Ibico cover materials are manufactured to punch cleanly in any Ibico machine.
Starting the Machine
To start the machine, plug into standard electricity socket (115 V). Punching block moves audibly into
starting position. Attach handle right hand side onto shaft end. Secure handle using enclosed screw and
allen wrench.
Punching
1.
2.
3.
4.
5.
Use guide to determine size of plastic comb.
Adjust punching depth with black knob (on right hand side).
Fanning and jogging the paper enables all sheets to be placed flush against the paper stop for
punching.
Place sheets flush into the machine (use side guide for adjustment).
Press switch on top right hand side. If too many sheets are used, the punching block automatically
reverses back to its original position. Reduce number of sheets to maximize punching capacity
and press switch again to restart cycle.
Binding
1.
2.
3.
4.
5.
6.
Place plastic comb open side up behind vertical metal fingers.
Push handle toward the rear to open rings of the plastic comb to the desired distance.
Set the opening of the comb with black knob (left hand side).
Place punched sheets into open comb, front page facing you.
Move handle back into original (vertical) position to close binding element.
Remove bound and finished book vertically.
Adding and removing pages once bound
To add and remove pages once bound, reverse operation. Your Ibico document is now bound!
Punching Capacity:
10 to 12 sheets (regular copy paper).
Maximum 2 covers (10 Mil).
Note: Empty the waste drawer regularly.
Technical Data:
115 Volts
60Hz
120 Watts
1
1.4 amps
IBICO Plastic Comb Guide:
Margin Depth
φ (in) Round
No. of sheets (80 gsm)
Margin Depth
φ (in) Round
No. of sheets (80 gsm)
Margin Depth
φ (in) Round
No of sheets (80 gsm)
Margin Depth
φ (in) Oval (S.L.)
No. of sheets (80 gsm)
12
Position 1
3/16” ¼”
20
40
90
Position 3
½” 9/16” 5/8”
100 120
Position 1
5/16” 3/8” 7/16”
55
70
Position 4
¾” 7/8” 1” 1-1/8”
150 170 200 220
Position 4
1-1/4” 1-1/2” 1-3/4” 2”
230
290
360 425
IMPORTANT: To turn the machine off, disconnect plug from socket.
LIMITED WARRANTY FOR PUNCHING AND BUINDING EQUIPMENT
IBICO punching and binding equipment is warranted for a period of one year form the date of the dealer’s
sale to the consumer. Excluded from the warranty are the dies which are subject to wear.
For service of a unit under warranty, call Ibico Inc. Repair Services at 1-800-487-4069. IBICO INC. will
repair or replace at your option the unit free of charge and return it prepaid. Please include a copy of your
paid invoice. Any unit sent without proof of purchase will not be serviced free of charge. Instead such
units will be serviced at the prevailing rates and returned C.O.D.
This warranty does not extend to any IBICO machine that has been subject to misuse, neglect, accident, or
it the serial number has been altered or defaced, or the unit has been opened.
This warranty contains the entire obligation of IBICO INC. Unless prohibited by law neither this warranty
nor any other warranty express of implied, including implied warranties of merchantability, shall extend
beyond the warranty period. No responsibility is assumed for incidental or consequential damages.
This warranty is valid only within the contiguous 48 states. IBICO INC. will honor this warranty outside
this area with the stipulation that all shipping and related charges involved in transporting the defective unit
to and from IBICO’s premises will be borne by the customer.
2
3
Parts List
ITEM GBC#
IBICO#
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
27)
28)
29)
30)
31)
32)
33)
34)
35)
36)
37)
38)
39)
40)
41)
42)
43)
44)
45)
46)
47)
48)
49)
50)
51)
52)
53)
2230043
2232031
2218210
7400602
7400520
7400521
1907204
7400522
7400523
7400524
1800301
7400586
1800105
7400588
7400587
1800133
7400619
1800306
1800455
7400620
7400621
7400622
7400589
7400510
7400590
1800103
1800108
7400591
7400592
7400593
1800307
1800110
7400634
7400594
7400595
7400638
7400639
7400596
7400597
7400651
7400652
1800402
1960530
1800113
7400653
1931503
7400598
7400599
1800107
7400505
7400656
7400542
7400659
7400661
7400600
7400667
2216033
2215910
2216110
9930300
1111790
9902400
1132090
1112390
9901000
2234410
9930900
9950400
2215129
2215229
1116390
1103490
1103690
1103790
9900300
9900500
1112790
1116690
1116790
9940100
9901100
2213610
1116590
1116490
2230843
2230943
1132890
1132990
2234500
2226000
9920500
9911300
2226100
1133590
1133490
9903000
1131090
1133029
2230320
1130190
2233710
1132290
0640051
DESCRIPTION
CHASSIS PB 21
DRAWER GUIDE
RUBBER FOOT
8-32X ½ SLTD. HEX SELF TAP SCREW
STOP PAPER GUIDE
ADJUSTING SCREW
WASHER
WASHER M6
BEARING BRACKET ASM. (RIGHT)
PHILIPS SCREW FLT HD M5X10
AXLE COMPLETE
BEARING BRACXKET ASM. (LEFT)
ALLEN SCREW M5XZ10 BURNISHED
SPRING WASHER
DISTANCE PLATE 14X26X0.5
RETAINING RING A14
PAPER STOP LEVER
PAPER STOP GUIDE
PAPER STOP RAIL CPL.
PUNCH BLOCK ASM. (LEFT)
PUNCH BLOCK ASM. (CENTER)
PUNCH BLOCK ASM. (RIGHT)
ALLEN SCREW M5X12 BURNISHED
ALLEN SCREW M5X16 BURNISHED
PRESSURE BEAM ASM.
TOOTHED RACK ASM. (RIGHT)
TOOTHED RACK ASM. (LEFT)
SPRING LOCK WASHER M5
ALLEN SCREW M5X20 BURNISHED
PRESSURE SPRING
SPRING HOLDER ASM. (LEFT)
SPRING HOLDER ASM. (RIGHT)
COVER PLATE (LEFT)
COVER PLATE (RIGHT)
HINGE ASM. (LEFT)
HINGE ASM. (RIGHT)
CONTROL KNOB
KNOB
NUT
LOCTITE
SCREW
KNOB COVER
LUBRIPLATE #130-AA
BACK COVER IBICO-GREY
FRONT COVER IBICO-GREY
THREAD CUTTING SCREW M3X8
COMB ASM.
CARRIER CPL.
SLIDE
COVER PLATE ASM.
DRAWER
LEVER COMPLETE, GREY KOMBO
RULER, KOMBO SELF ADHESIVE
4
QTY.
1
2
4
6
1
1
1
1
1
10
1
1
7
1
2
2
1
1
1
1
1
1
4
8
1
1
1
6
2
2
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
16
1
1
1
1
1
1
1
5
6