PrimeCare® Beds

Transcription

PrimeCare® Beds

About Us
With nearly two decades combined experience, Primus Medical has been
providing leading-edge products to enable health care providers with innovative
care for their customers. We continuously expand our manufacturing capabilities to
provide our customers with high-quality products at low costs, including:
• Full Function low beds
• Bariatric beds, lifts and chairs
• Therapeutic air mattresses
• Therapeutic foam mattresses
• Lifts and slings
• Safety products and Fall Prevention
• Fitness Equipment
• Case Goods
• DME products
• Interior Design
Paying special attention to individual customer’s needs, Primus Medical
can offer superior customer service for your residents and staff. Every Primus Medical
product must not only be easy to use and cost effective, but also must provide
the end user with comfort and dignity. This is exemplified in the recent product
successes of the PrimePlus® B1750 High Capacity Bed, PrimeCare® B901 High/Low
Beds. Primus Medical is also capitalizing on our manufacturing capabilities and
partnerships to introduce a line of fitness equipment that can be used to promote
wellness and resident activity.
Primus Medical has further promoted its growth by establishing offices
throughout the United States to better meet its customer needs. We continue to
build global strategic partnerships in Canada, Europe, and Asia. Health care
providers around the world already trust and depend on Primus Medical to meet
their organizational and equipment needs; we look forward to learning how Primus
Medical can provide solutions for your organization today!
Corporate Office
8401 Southern Blvd.
Boardman, OH 44512
Toll Free: 1-877-638-2776
Fax: 330-965-9683
Local Office: 330-965-9681
Quality Policy
Primus is committed to providing quality product and services to our customers.
Primus will only receive and ship quality products.
To Place an Order Call: 1.877.638.2776
1
Table of Contents
PrimeCare® Beds
•
•
•
Low Beds
Head and Footboards
Accessories and Replacement Parts
PrimePlus™ Beds
•
•
•
High Capacity Beds
Head and Footboards
Replacement Parts
Foam Mattresses
•
•
•
•
Transcend Series
Bariatric Foam
Expandable Foam
Accessories
Air Mattresses
•
•
•
Low Air Loss
Alternating Pressure
Hybrid
Seating Cushions
•
•
•
Gel, Foam, Rehab and Hybrid
Heel Protection
Accessories
Lifts and Slings
•
•
•
Lifts
Replacement parts and Accessories
Slings
Safety Products
•
•
•
Fall Prevention
Accessories
PrimeMat™ Floor Mats
cont...
*PrimeCare® , PrimePlus™ , and PrimeSnap® are all registered trademarks of Primus Medical LLC.
www.primusmedical.com
2
Table of Contents continued
Resident Care
•
•
•
Walking Aids and Transport
Bath Safety and Commodes
Transport and Wheelchairs
Case Goods
•
•
Primus Case Goods Collection
OTB Tables
HomeCare
•
•
•
•
Freedom Rise
Seating Cushions
Fall Mats
DME
Ordering by Part Number
The following will help decribe the Primus Medical product numbering system, so that all
products can be ordered quickly and effeciently.
COMPLETE PART NUMBER
SP01-XXXXX
TWO LETTER CODE
ZERO
NUMBER
PART PREFIX
ITEM CODE*
PART SUFFIX
When placing your order over the phone, or an online ordering system; please make sure
you enter and understand the part number of the item you are trying to order. Entering
incorrect characters or numbers can result in processing errors. Please call 877-638-2776 for
assistance if you are having trouble ordering.
3
PrimeCare® Beds
PrimeCare® Beds
PCB901 ULTIMATE 35” HIGH/LOW BED
*shown with custom head/foot boards
Options
Quick Specs
• Overall Length
(w/head and foot boards, not including wall guard)
SP01-PCB901ABE
Rotating Assist Bar
851/4”/ 891/4”/ 931/4”
• Overall Length at 80” Adjustment 86 1/4”
(Including wallguard in shortest position)
• Overall Width
• Overall Width with 2 extensions
• Length of Mattress Deck
• Mattress Deck Height (low)
• Mattress Deck Height (high)
• Head deck angle range
• Thigh deck angle range
• Foot deck angle range
• Knee deck angle range
• Trendelenburg Capable *
• Reverse Trendelenburg Capable *
• Weight of Bed
• Maximum Weight Capacity
• Rolls in Low Position
• Rolls at any Height
35”
42”
76”/80”/84”
67/8”
307/8”
00 to 700
00 to 320
00 to 110
00 to 430
Yes
Yes
202lbs
500lbs
Yes
Yes
SP01-PCB901ARE2
Rotating Half Rail
SP01-55658
Embedded Staff Control/ Lockout
SP01-PCBA42WE
42” Width Extension
SP01-PCB901TPE
Bed Transport system
Warranty
SP01-PCB901
SP01-CB49064
Battery Backup with mount
• 15 yr frame 3 yr electrical
• Lifetime warranty all welds
* Requires staff control option
Expands into a 42“ 500lb capacity bariatric bed!
Everyday presents a new challenge in caring for resident and at a time when safe working
environment, quality of care, and cost consciousness are at a premium. Your equipment needs to rise
to the occasion and that’s where we come in! Enter the Prime Bed PCB901. An excellent bed to handle
your patients who need a little more elbow room for comfort and dignity. An additional
benefit is a more workable surface for repositioning and care by staff and faculty.
Boasting a 500lb weight capacity and the ability to EXPAND from 35” to 42” wide and 76” to 84” in
length, the PCB901 can meet and exceed the rigorous challenges of resident care in today’s industry.
Primus Medical strives to develop and produce a complete and tactical product focusing on
reducing cost and maintaining a “Best in Class” standing. This can be surmised in one word;
synonymous with Primus Medical: Quality.
PCB601 LOW BED
*shown with custom head/foot boards
Quick Specs
Options
• Overall Length
861/2”
• Overall Length
911/4”
• Overall Width
• Trendelenburg Capable
• Reverse Trendelenburg Capable
• Weight of Bed (without h/f boards or options)
36.75”
42”
79”
8”
26”
00 to 700
00 to 200
00 to 60
00 to 260
No
No
212lbs
450lbs
Yes
Yes
SP01-PCB300-03AE
Fixed Assist Bar
SP01-PCB300-07AE
Rotating Assist Bar
SP01-PCB300-08AE
Rotating Assist Rail
SP01-PCBA42WE-301
SP01-58687
PCB601 Only
SP01-PCB601
• Staff Control Panel
• Battery Backup System
SP01-PCB300-05E
Trapeze
Warranty
42” capable 450lb capacity low bed
Looking for that entry level bed pricing but don’t want the minimalist features associated with the cost?
The PrimeCare® PCB601 is the solution to your problems. Sustaining a 450lb weight capacity and an
optional 42” expandable deck, the PCB601 shares all the basic features of its sister bed the PCB301.
The comparison ends there as the PCB601 moves up a notch offering elements commonly found only
on more expensive beds. An advanced caster locking system is employed for one touch operation .
Other premium options include the ability for embedded staff control and a battery backup system.
SP01-PCB300-06E
Transporter
SP01-CB49064
Battery Backup with mount
4
PrimeCare® Beds
PCB301 LOW BED
Quick Specs
Options
• Overall Length
861/2”
• Overall Length
911/4”
• Overall Width
• Weight of Bed (without h/f boards or options)
36”
42”
79”
8”
26”
00 to 700
00 to 200
00 to 60
00 to 260
No
No
210lbs
450lbs
Yes
Yes
SP01-PCB300-03AE
Fixed Assist Bar
SP01-PCB300-07AE
Rotating Assist Bar
SP01-PCB300-08AE
Rotating Assist Rail
SP01-PCBA42WE-301
SP01-PCB300-05E
Trapeze
Warranty
SP01-PCB300-06E
Transporter
SP01-PCB301
42” capable 450lb capacity low bed
Today’s economy and rising costs of healthcare are putting a hard pinch on everyone’s pocketbook.
Need a bed that can do it all but at an affordable cost? Primus Medical has the answer you are
looking for! The PrimeCare® PCB301 entry level low bed has everything you need in a low bed and
more. Featuring a 450lb weight capacity, this low beds features a multitude of standard features along
with options usually found only with more expensive beds allowing it to suit most any application.
Add a fall mat to your order for extra protection!
PrimeMat™
INJURY MITIGATING FLOOR MAT
SP05-PMAT1-G1
Gray beveled floor mat
68” x 23” x 3/4” low profile
Injury mitigating floor mat
Durable molded foam/rubber construction featuring a non skid bottom and a
smoothed top surface. Beveled edges with a gentle slope allow beds and chairs to
move easily over the PrimeMat™ while being non hazardous to tripping.
Independently tested against industry leaders, the PrimeMat™ has been proven to
surpass the competitors in both Impact Absorbsion and Egg Drop Tests! A top seller.
Available in Gray and Brown.
PrimeMat™
SP05-PMAT1-B2
Brown beveled floor mat
5
PrimeCare® Beds
COLOR AND TRIM LOW BEDS
35” Head and Foot Boards
42” Head and Foot Boards
BROWNLEE WOODS
BROWNLEE WOODS
Overall Height: 15 3/4”
Overall Length: 34 3/4”
Thickness: 3/4”
Hole Size: 3/8”
Overall Length: 42”
Thickness: 3/4”
Hole Size: 3/8”
SMOKEY HOLLOW
SMOKEY HOLLOW
Thickness: 3/4”
Hole Size: 3/8”
Thickness: 3/4”
Hole Size: 3/8”
MILL CREEK
MILL CREEK
Thickness: 3/4”
Hole Size: 3/8”
Thickness: 3/4”
Hole Size: 3/8”
BRIER HILL
BRIER HILL
Thickness: 3/4”
Hole Size: 3/8”
Thickness: 3/4”
Hole Size: 3/8”
BEL AIRE
BEL AIRE
Thickness: 3/4”
Hole Size: 3/8”
Thickness: 3/4”
Hole Size: 3/8”
SP01-PCBAHDBW
SP01-PCBAFTBW
SP01-PCBAHDBW42
SP01-PCBAFTBW42
SP01-PCBAHDSH
SP01-PCBAFTSH
SP01-PCBAHDSH42
SP01-PCBAFTSH42
SP01-PCBAHDMC
SP01-PCBAFTMC
SP01-PCBAHDMC42
SP01-PCBAFTMC42
SP01-PCBAHDBH
SP01-PCBAFTBH
SP01-PCBAHDBH42
SP01-PCBAFTBH42
SP01-PCBAHDBE
SP01-PCBAFTBE
SP01-PCBAHDBE42
SP01-PCBAFTBE42
Standard Colors
Kensington Maple
Solar Oak
Wild Cherry
Montana Walnut
Figured Mahogany
Windsor Mahogany
Hundreds of Color Options Available for Custom Order!
Primus Medical offers hundreds of custom color options to meet all the decorative needs of your bed. Please contact us for a full lineup. Above are
the standard colors we carry and stock in volume. These colors allow for quick turnaround time for your order. Each of our standard colors features
a rich laminate that has been selected by Primus Medical to best accent our beds and work with the most common color schemes. Custom colors
may increase both cost and lead time. Call today for more information!
Color Suffix Index
SO -Solar Oak
MW -Montana Walnut
WC -Wild Cherry
KM -Kensington Maple
FM -Figured Mahogany
WM-Windsor Mahogany
View our Bronze Lake
Collection for custom options!
6
PrimeCare® Beds
Quick Specs
• Crowned and Arched style
• High quality contruction
• 36” and 42” widths available
• Veneer and Melamine Options
• Available in all Primus colors*
*special order colors can increase lead time/cost
Bronze Lake Collection
The Bronze Lake Collection features premium head and foot boards that
will take your Primus Medical bed to the next level of quality and style.
The boards come in two disticnt styles of a crowned and arched design.
The traditonal boards feature an ornate molding and trim pattern that sets
them apart from the rest. The arched versions feature a
pronounced top rail that contours the upper portion of the board for a
simple, classic design. Available in all standard Primus colors.
All standard colors availabale!
Color Suffix Index
SO -Solar Oak
WC -Wild Cherry
MW -Montana Walnut
WM-Windsor Mahogany
Crowned Style
Featuring rich, ‘crown molding’ styled design with ornate trim
work and a deep scalloped header.
Available in both 36” and 42” styles.
36” Melamine
Overall Height: 18/21”
Thickness: 1 1/2”
Hole Size: 3/8”
36” Veneer
Thickness: 1 1/2”
Hole Size: 3/8”
42” Melamine
Thickness: 1 1/2”
Hole Size: 3/8”
42” Veneer
Thickness: 1 1/2”
Hole Size: 3/8”
SP01-PM101HD-36CROWN
SP01-PM101FT-36CROWN
SP01-PM101HD-42CROWN
SP01-PM101FT-42CROWN
SP01-PV101HD-36CROWN
SP01-PV101FT-36CROWN
SP01-PV101HD-42CROWN
SP01-PV101FT-42CROWN
Arched Style
These classicly simple yet elegant boards feature an arched
design with a thick top contoured rail and pronouned
overhangs. Melamine Only. Available in both 36” and 42” styles.
36” Rounded
SP01-PCBAHD-BL
SP01-PCBAFT-BL
Overall Height: 18.5/20.5”
Thickness: 1 1/2”
Hole Size: 3/8”
42” Rounded
SP01-PCBAHD-BL42
SP01-PCBAFT-BL42
Overall Height: 18.5/20.5”
Thickness: 1 1/2”
Hole Size: 3/8”
Arched boards feature Melamine construction
7
PrimePlus™ Beds
TRANSPORTER BED TRANSPORTATION SYSTEM
Quick Specs
• Head and footboard attachment
• Caster Steering locks
• Locking casters
• Heavy duty welded steel construction
• Pearl gray finish
• Non marring surface on transporter feet
SP01-TRANSPORT
Easily move a bed around a facility
The PrimeCare® transporter allows ease of mobility when relocating a bed within a facility. This is accomplished by hooking the bed
transporter to your low bed, lowering and using the long arms of the transporter for leverage to pivot the bed onto its side. The Prime Care®
transporter installation can be completed quickly by one person and is able to be operated without assistance aswell.
Replacement Parts LOW BEDS
Call for pricing and availability!
PCB901
SP01-PCBR-29E
SP01-PCBR-37E
SP01-72298
SP01-CA65738
SP01-PCB901WG
SP01-72682
SP01-72492
SP01-68663
SP01-69159
SP01-CA51336
PCB301/ PCB601
SP01-PCBR-29E
SP01-PCBR-37E
SP01-72298
SP01-CA65738
SP01-PCB300-01-56E
SP01-72497
SP01-72492
SP01-72487
SP01-67398
SP01-66702
SP01-CA51336
Non-locking caster for PCB901 bed frame
Locking caster for PCB901 bed frame
Replacement pendant for PCB901 bed frame
Replacement power cord for PCB901 bed frame
Replacement wall guard for PCB901 bed frame
Foot actuator for PCB901 bed frame
Head actuator for PCB901 bed frame
Hi Low actuator for PCB901 bed frame
Control box for PCB901 bed frame
Y-Cable for PCB901 bed frame
Non-locking caster for PCB601 bed frame
Locking caster for PCB601 bed frame
Replacement pendant for PCB601 bed frame
Replacement power cord for PCB601 bed frame
Replacement wall guard for PCB601 bed frame
Foot actuator for PCB601 bed frame
Head actuator for PCB601 bed frame
Hi Low actuator for PCB601 bed frame
Y-Cable for PCB601 bed frame
8
PrimePlus™ Beds
PrimePlus™ Beds
PPB2000 1000LB CAPACITY EXPANSION BED
Quick Specs
SP02-PPBASR
Additional set of padded siderails
• Overall Length at 80” configuration
• Minimum Overall Length at 80” config.
94 1/2”
97”
• Maximum Overall Length at 84” config.
102”
• Overall Width frame only
• Overall Base Width with padded side rails
• Overall Width to first pins
• Overall Width to second pins
• Overall Width to third pins
• Overall Width to fourth pins
• Weight of Bed (without h/f boards, siderails,options.)
• Maximum Weight Capacity*
38”
41”
39”
42”
48”
54”
80-84””
18.5”
32.25”
00 to 540
00 to 450
00 to 270
Yes
Yes
469lbs
1000lbs
Yes
Yes
Warranty
* includes patient, bedding, and all accessories
(w/ head and foot boards, including wallguard at first pins)
(w/ head and foot boards, including wallguard at last pins)
SP02-PPB2000
Options
93”
SP02-PPBATRAP
Bariatric Trapeze for PPB2000
SP02-PPBAFSTRAP
Bariatric Freestanding Trapeze
SP01-55658
SP01-CB49064
Battery Backup and Mount
SP02-PPBASC
Bariatric Scale Unit for PPB2000
High Capacity/ Bariatric Bed
The Prime Plus B2000 is our top of the line bariatric expandable bed. Featuring the highest rated, 1000lb
weight capacity and a 54” width expansion; the B2000 leaves no individual without room and comfort
and dignity. Thick padded, one button assist rails provide comfort and safety. One touch width
expansion provisions easily adapt to mattress changes and eases the duty of the caregiver. Oversized
head and foot boards feature literature pockets and easily accept air mattress blowers and scale
provisions. With optional scales, assist rails, and trapeze attachments; the B2000 can truely do it all.
Scale Ready!
PPB1750 750LB CAPACITY EXPANSION BED
Quick Specs
Options
• Overall Length at 80” configuration
92”
95”
97 3/4”
(w/ head and foot boards, including wallguard at first pins)
(w/head and foot boards, including wall guard at first pins)
• Maximum Overall Length at 84” config. 103”
SP02-PPBASR
Additional set of padded siderails
SP02-PPBATRAP
Bariatric Trapeze for PPB1750
(w/ head and foot boards, including wallguard at last pins)
• Overall Width frame only
• Overall Base Width with padded side rails
• Overall Width to first pins
• Overall Width to second pins
• Overall Width to third pins
• Weight of Bed (without h/f boards, siderails,options.)
• Maximum Weight Capacity*
Warranty
SP02-PPB1750
38”
41”
39”
42”
48”
80-84”
15.25”
28.75”
00 to 660
00 to 400
00 to 230
00 to 630
No
No
423lbs
750lbs
Yes
Yes
SP02-PPBAFSTRAP
Bariatric Freestanding Trapeze
SP02-TBB21060001
Battery Backup and Mount
* includes patient, bedding, and all accessories
Versatile multi-function bed
The B1750 can be used for a wide range of patients up to a high capacity 750lb limit. The bed is capable
of expanding to accept a 48” mattress making it an excellent high capacity choice without having to
step up to a full bariatric platform. Tool-free push button espansion rails allow the user to expand the bed
quickly. Heavy duty locking casters reside on all four corners of the bed. Thick padded siderails lock into
multiple positions quickly.
9
PrimePlus™ Beds
COLOR AND TRIM PrimePlus™ Beds
High Capacity/Bariatric Head and Foot Boards
STANDARD BOARD
SP02-PCBAHD
SP02-PCBAFT
Thickness: 1”
Hole Size: 3/8”
No of Holes: 3 per side
Standard Colors
Kensington Maple
Solar Oak
Wild Cherry
Montana Walnut
Figured Mahogany
Windsor Mahogany
Hundreds of Color Options Available for Custom Order!
Primus Medical offers hundreds of custom color options to meet all the decorative needs of your bed. Please contact us for a full lineup. Above are
the standard colors we carry and stock in volume. These colors allow for quick turnaround time for your order. Each of our standard colors features
a rich laminate that has been selected by Primus Medical to best accent our beds and work with the most common color schemes. Custom colors
may increase both cost and lead time. Call today for more information!
Color Suffix Index
SO -Solar Oak
MW -Montana Walnut
WC -Wild Cherry
WM-Windsor Mahogany
Replacement Parts HIGH CAPACITY AND BARIATRIC BEDS
Call for pricing and availability!
PPB2000
SP01-66468
SP02-66251
SP02-66245
SP02-66261
SP01-CA51336
SP02-UA18701500E
SP02-UA18701501E
SP02-51518
SP02-51495
SP01-CA65738
SP02-PPBWALLG-1
PPB1750
SP02-TC11060005
SP02-TA71060004
SP02-TA71060005
SP02-TA71060006
SP02-TYC1060001
SP01-UA18321520E
SP02-TH21060003
SP02-PPB17503402E
SP02-PPBWALLG-1
Control Box for PPB2000 Bed Frame
Foot Actuator for PPB2000 Bed Frame
Head Actuator for PPB2000 Bed Frame
Hi/Lo Actuator for PPB2000 Bed Frame
Y-Cable for PPB2000 Bed Frame
Total Locking Caster for PPB2000
Direct Locking Caster for PPB2000
10 Button Pendant w/ Magnetic lockout for PPB2000 Bed Frame
10 Button 5 function Pendant for PPB2000
Replacement Power Cord for PPB2000 Bed Frame
Replacement Wall Guard for PPB2000 Bed Frame
Control Box for PPB1750 Bed Frame
Foot Actuator for PPB1750 Bed Frame
Head Actuator for PPB1750 Bed Frame
Hi/Lo Actuator for PPB1750 Bed Frame
Y-Cable for PPB1750 Bed Frame
Replacement Caster for PPB1750
8 Button Pendant for PPB1750 Bed Frame
Replacement Power Cord for PPB1750 Bed Frame
Replacement Wall Guard for PPB1750 Bed Frame
10
Foam Mattresses
Foam Mattresses
Transcend Series
TRANSCEND BASIC PRESSURE REDISTRIBUTION REACTIVE MATTRESS
SP03-TBCM3576
SP03-TBCM3580
SP03-TBCM3584
Available Sizes
Transcend Basic Foam Mattress 35x76x5.5
SP03-TBCM3576PRS
SP03-TBCM3580PRS
SP03-TBCM3584PRS
Available with a 4” Firm Foam Perimeter
Warranty: 1 yr Foam Core , 1 yr Mattress Cover
PREVENTION UP TO STAGE I PRESSURE ULCERS
Product Features: Transcend Basic
Deluxe removable navy nylon cover reduces friction and shearing and is fluid proof. Bottom cover is reinforced ribbed vinyl that resists
punctures and tears. 250lb weight capacity.
TRANSCEND PRESSURE REDISTRIBUTION REACTIVE MATTRESS
SP03-TCM3576
SP03-TCM3580
SP03-TCM3584
SP03-TCM4280
SP03-TCM4284
Available Sizes
Transcend Foam Mattress 35x76x6
SP03-TCM3576PRS
SP03-TCM3580PRS
SP03-TCM3584PRS
PREVENTION UP TO STAGE III PRESSURE ULCERS*
Product Features: Transcend
Upgraded Navy Urethane Stretch cover reduces friction and shearing and is fluid proof. Bottom cover is reinforced ribbed vinyl that resists
punctures and tears. 2” of Premium soft foam with our unique topper surface for enhanced comfort with pillow top foam heel section for
advanced pressure redistribution. 4” of premium firm high density foam for maximum support. 350lb weight capacity.
*with aggressive Q2 cycles
TRANSCEND ADVANCED PRESSURE REDISTRIBUTION REACTIVE
SP03-TACM3576
SP03-TACM3580
SP03-TACM3584
Available Sizes
Transcend Advanced Foam Mattress 35x76x7
SP03-TACM3576PRS
SP03-TACM3580PRS
SP03-TACM3584PRS
PREVENTION UP TO STAGE III PRESSURE ULCERS*
Product Features: Transcend Advanced
Upgraded Navy Urethane Stretch cover reduces friction and shearing and is fluid proof. Bottom cover is reinforced upgraded black,
Non-Skid Bottom that resists punctures and tears. Qualex™ premium foam with our unique topper surface reduces pressure and increases air
flow thereby reducing skin temperature and enhancing comfort. The visco elastic foam foot and heel section further redistributes pressure.
Integrated high density foam around the leading edges of the mattress help keep patients centered and provide for a more secure transfer.
Medium firm high density foam center offers additional support and positioning. Premium high density firm base foam provides maximum
support. The Transcend Advanced features a 7yr limited warranty. 350lb weight capacity.
*with aggressive Q2 cycles
11
Foam Mattresses
PrimePlus™ Transcend High Capacity BASIC Foam Mattress
SP02-PPBM396
SP02-PPBM426
SP02-PPMB486
SP02-PPMB546
SP02-PPBM396PRS
SP02-PPBM426PRS
SP02-PPMB486PRS
SP02-PPMB546PRS
PrimePlus™ HC Foam 6” Basic Mattress
Available Sizes
Prevention Bariatric Pressure Reduction
39 x 80 x 6
42 x 80 x 6
48 x 80 x 6
54 x 80 x 6
Available With Perimeter Rail System
Prevention Bariatric Pressure Reduction PRS
39 x 80 x 6
42 x 80 x 6
48 x 80 x 6
54 x 80 x 6
Warranty: 3yr on materials and workmanship
This foam mattress offers quality and comfort at low cost. Mattresses feature a 6” thick two layer foam construction. Perfect economy based
bariatric mattress for outpatient needs. All mattresses are fixed width and are available with raised perimeter bolsters for patient security.
450lb weight capacity.
PrimePlus™ Transcend High Capacity Foam Mattress
SP02-PPBM397
SP02-PPBM427
SP02-PPMB487
SP02-PPMB547
SP02-PPBM397PRS
SP02-PPBM427PRS
SP02-PPMB487PRS
SP02-PPMB547PRS
Available Sizes
39 x 80 x 7
42 x 80 x 7
48 x 80 x 7
54 x 80 x 7
Available With Perimeter Rail System
39 x 80 x 7
42 x 80 x 7
48 x 80 x 7
54 x 80 x 7
PrimePlus™ Bariatric 7” Mattress
The 7” thick PrimePlus Bariatric Mattress will provide excellent pressure distribution and comfort. This mid level mattresse features supportive, 7”
thick three layer foam construction. All mattresses are fixed width and available with raised perimeter bolsters for patient security.
650lb weight capacity.
Bariatric Expandable Foam
Deluxe HIGH CAPACITY EXPANDABLE MATTRESS
Quick Specs
• Twin Layer Foam Mattress
• Add on width extensions
• Durable top cover
• Heavy duty vinyl shell
• Easy carry straps
• Available in 35”- 42” widths
• Available in 39”-48” widths
SP02-PSDX3542
SP02-PSDX3948
Available Sizes
Bariatric Expandable Foam 35” to 42” x 82
Deluxe Mattress
The Deluxe is one of two expandable bariatric mattresses from Primus Medical. Featuring two piece foam construction, the Deluxe offers
detachable side extensions allowing you to add or remove overall width from 35”-42” and 39“-48”. Durable underside features straps to
attach the mattress to the bed frame. 1000lb weight capacity.
12
Foam Mattresses
Evolution HIGH CAPACITY EXPANDABLE MATTRESS
Quick Specs
• Muti Layer High Capacity Foam Mattress
• Oversized width extensions
• Durable top cover
• Heavy duty vinyl shell
• Velcro Mattress Retainers
• Easy carry straps
• Breathable extensions
• Available in 35”- 42” widths
• Available in 39”-48” widths
SP02-PSEV3542
SP02-PSEV3948
Available Sizes
Evolution Mattress
The Evolution is one of two expandable bariatric mattresses from Primus Medical. Featuring multi layer foam construction, the Evolution offers
detachable side extensions allowing you to add or remove overall width from 35”-42” and 39“-48”. Durable underside features straps to
attach the mattress to the bed frame. 1000lb weight capacity.
Foam Mattress Accessories
Expandable Mattress Foam Overlay
EXP42 MATTRESS EXPANDER
Quick Specs
• 35” to 42” Conversion
• Thick foam top layer
• Dual 3.5” wide foam mattress expanders
• Fully encloses mattress
• Underside fastening straps hold in place
• Nylon top cover
SP02-EXP42-1
Mattress Overlay 42 x 80
42” Mattress Expander
The EXP 42 mattress expander converts a standard 35” wide mattress to a 42” High Capacity mattress that can be used in bariatric
application. Easy to use Velco attachment points ensure a painless installation.
Misc Mattress Items
PRIMUS GAP FILL EXTENDS A MATTRESS END FOR TALLER PATIENTS
Gap Fills Available
SP03-GF3566
SP03-GF4266
Metas Gap Fills 35 x 6 x 6
Metas Gap Fills 42 x 6 x 6
Quickly extend your mattress by 6”
The Gap Stop is used when a longer mattress is needed without having to swap it out on the bed. Takes the space up between mattress end
and the retainer. Available in both 35” and 42” widths. Durable nylon top cover over molded foam.
13
Foam /Air Mattresses
Perimeter Mattress Overlays
PERIMETER COVER
4 WAY STRETCH DEFINED RAISED COVER
Available Sizes
Bolster Height
SP05-PCOV4W35
35” x 80”
4” Bolsters
SP02-PCOV4W42
42” x 80”
5” Bolsters
SP02-PCOV4W48
48” x 80”
5” Bolsters
Promotes patient safety without the need for side rails.
The defined perimeter mattress covers offers a low intervention solution to many of the side rail restraint issues affecting facilities today.
Wedge shaped foam sections line the side perimeters of the mattress, providing a gentle reminder to those lying in bed of the mattress
edges and to help prevent accidental falls from the bed. Features 15” openings allow for easy patient ingress and egress. Straps with
quick-release buckles easily secure the cover to the bed. Strategically placed sheet clips to hold bed sheets securely in place and comes
with a removable foot bolster for patient comfort. Four Way Stretch cover consists of a waterproof urethane coating that can be wiped
clean according to standard mattress cleaning produts. Meets CA TB #117, Section E Flame retardant standards for fire saftey in
construction.
Important
This device is NOT a substitute for side rails or other protective devices for patients at risk of injury from falls due to unassisted bed exits.
Always follow your facility’s policies and procedures for patient assessment and monitoring. Never use this product with patients in
physical restraints with the side rails down. Serious injury or death could occur if patient becomes suspended off mattress surface.
Air Mattresses
Low Air Loss Mattresses
AirForceOne® TRUE LOW AIR LOSS
MATTRESS
Quick Specs
Control Unit
• Weight Capacity 1000lbs
• Dual modes of therapy
- Static air loss
- Alternating pressure and low air loss
• True low air loss technology diffuses 100 liters of air
per minute under the patient
• Unique 1 in 3 true alteration
• Waterproof and vapor permeable top cover provides
low friction/shear
• Patented CPR release, for resuscitation emergencies
• Treats up to Stage IV Pressure Ulcers
• Dimensions
• Weight
• Electrical Rating
• Cycle Time
• Power Cord
• Warranty
6”L x 6”W x 10.5”H
13.5”L x 5”W x 9”H
7-11 lbs.
120v/60Hz
Variable (3-20 minutes)
Harmonized Hospital
Grade Plug
1yr blower unit only
Support Surface
• Warranty
• Top Cover Warranty
SP04-AFO3580
SP02-AFO3980
SP02-AFO4280
SP02-AFO4880
SP02-AFO5480
SP02-AFO6080
SD04-86500
2yr limited
90days
Available Sizes
True Low Air Loss 1 in 3 Alternation 35 x 80 x 8
Sapphire Blower for Air Force One Mattress (Blower ONLY)
TREATMENT AND PREVENTION UP TO STAGE IV PRESSURE ULCERS
39-60” 1000lb True Air Loss Mattress
The Air Force One is a domestic mattress that features high strength air cells, which are vented to provide True Air Loss therapy. This patient
interface creates a microclimate condition between the patient and the mattress; a balance of skin temperature, humidity, and air movement. This aids in wound care and keeps the patient comfortable whether in alteration or static modes of operation. The air cells rest on a 2”
covered foam safety pad for added patient protection during power outages or patient transfer. This foam safety pad is waterproof, highly
vapor permeable and completely machine washable. The entire system is portable and fits on most standard medical bed frames. The Air
Force One features a BOLSTER SYSTEM which keeps the patient from sliding off the edge of the mattress. The microprocessor controlled blower
unit features a unique 1 in 3 True Alternating Low Air Loss therapy. The alternating cycle time can be adjusted from 3 to 20 minutes in increments of one minute. Additional features include: “Static” for stationary low air loss therapy, “Auto Firm” for rapid inflation and easy patient
transfer and “Lockout” to maintain caregiver settings without accidental changes.
14
Air Mattresses
Generation 2 LA100 1375 LITER BLOWER DRIVEN LOW AIR LOSS
Quick Specs
MATTRESS
• Weight Capacity 1000lbs
• Dual modes of therapy
- 5 Zone Pulse Therapy
- True Low Air Loss
• Auto sensing control unit
• Unique 1 in 3 true alteration
• 16 cell overlay or 16/20 cell mattress
• Waterproof and vapor permeable top cover provides
low friction/shear
• CPR emergency deflation release valve
• Treats up to Stage IV Pressure Ulcers
Control Unit
• Plug and play auto-sensing
• High airflow 1275 liters per minute
• User friendly control panel 7 segment LED display
• Max FLow mode with 15-50 second inflation
• Effective true air loss relief, pulse therapy along
with continuous low air loss relief.
• Lock out key prevents tampering
Support Surface
• Warranty
SP04-BLAL3680
SP02-BLAL3980
SP02-BLAL4280
SP02-BLAL4880
1yr limited
Available Sizes
Blower Driven Low Air Loss Treatment 36 x 80 x 10
Blower Driven Low Air Loss Mattress
The LA 100 features a True Low Air Loss System. While offering up auto 5 Zone Pulse therapy and True Air Loss relief the LA 100 still remains the
most affordable in the market. The combined 5 pressure zones can support up to a 1000lb patient. Plug and play auto-sensing control unit
with user friendly dome key control panel. Therapeutic support surface consists of superior quality, urethane coated nylon air cushions. Low
friction and low shear force producing, urethane coated breathable nylon top sheet, which is liquid proof and highly vapor permeable.
Complete support surface is made of superior quality materials and is modular in construction. All of he components such as manifold, tubing
assembly, air cushions, top sheet, and foam base are interchangeable, and can be easily cleaned or detached for laundry. Lightweight
support surface can be rolled up easily and has two handles or two shoulder straps, which can be used to carry by hand or over the shoulder.
An excellent value.
Alternating Pressure Air Mattress
Generation 2 APLow50 LITER COMPRESSOR DRIVEN APM WITH ON DEMAND LOW AIR LOSS
Quick Specs
• 1000lb Weight Capacity
• 80” x 36” Sleep Surface
• 10” Mattress Height
• Static or Alternating Pressure
• Real Time Pressure Monitoring
SP04-APM-LAL3680
SP02-APM-LAL3980
SP02-APM-LAL4280
SP02-APM-LAL4880
Warranty
• 1 yr limited
Available Sizes
Gen2 APLow50 APM ; OD Low Air Loss
36 x 80 x 10
39 x 80 x 10
42 x 80 x 10
48 x 80 x 10
On Demand Low Air Loss APM Mattress
This air mattress features an alternating low interface pressure linear pump for therapy and control while also boasting a 1,000lb weight
capacity. As with our AP mattress series, the APLow50 gives the consumer the maximum amount of mattress technology for their dollar.
Equipped with such features like Real Time Pressue Monitoring, CPR rapid deflate device, and a smart therapy support surface; the APLow50
makes itself a great choice for your facility.
Generation 2 AP50 LITER COMPRESSOR DRIVEN APM 10” MATTRESS
Quick Specs
• 80” x 36, 39, 42, or 48” Sleep Surface
• Static and Alternating Pressure Therapy
SP04-APM3680
SP02-APM3980
SP02-APM4280
SP02-APM4880
Available Sizes
Warranty
• 1 yr limited
Gen2 AP50 Compressor Driven APM
36 x 80 x 10
39 x 80 x 10
42 x 80 x 10
48 x 80 x 10
10” Compressor Driven Mattress
The AP50 mattress features a dynamic alternating low pressure system. Adjustable from 1 to 99 different levels of comfort and boasting a
1000lb weight capacity; the AP50 can easily be configured for any patient need, large or small. A highly breatheable, water repellent top
cover ; found accross the entire AP line, keeps the patient comfortable while easing clean-up and maintenance. A quick release CPR valve is
built in as well.
15
Air,Hybrid Mattresses/ Seating
Generation 2 AP10 ALTERNATING PRESSURE MATTRESS
Quick Specs
• Static and Alternating Pressure Therapy
Warranty
• 1 yr limited
SP04-BAPM3680
Available Sizes
Gen2 Liter Compressor Driven APM 36 x 80 x 8
Basic Alternating Pressure Mattress
The AP10 offers an economy alternating pressure system. Perfect for non high capacity patients and budgets alike. Featuring static and
altnernating pressure functions as well as an emergency CPR valve, the AP10 offers big function at a low cost.
Lightweight blower unit easily hangs and transports.
Hybrid Mattresses
Concord Plus Hybrid Gen 2 AIR FOAM HYBRID MATTRESSES
Quick Specs
• Available with 4 or 9 Lateral Air Cells
• Visco Comfort Layer Topper
• Sloped Heel Section
• Nylon top cover
• Durable non-skid bottom
• 9 cell version includes
Alternating Pressure Pump
SP04-CPHY9
SP04-CPHY4
SP04-5000PUMP
Available Sizes
Concord Plus 9 Cell w/ Pump
Concord Plus 4 Cell Mattress Only
Legacy APM 5000 Replacement Pump
AVAILABLE IN 4 AND 9 CELL CONFIGURATIONS
On Demand Low Air Loss APM Mattress
The Concord Plus Hybrid mattress can be used as a powered or non-powered support surface. The tri-lamintated foam filled air cells are
separated into three distinct zones and are plumbed to the ambient room pressure. On top of the air cells is a 1 1/2” layer of foam as well as
1 1/2” of a 5-zoned polyurethane foam.
Seating Cushions
Gel Foam Seating Cushions
Premium 4 Way Stretch Top High Density Gel Foam 250lb capacity Cushion: 3” Thick
SP06-GC1616
SP06-GC1816
SP06-GC2016
SP02-GC2218
SP02-GC2418
Gel Cushion, 4 way stretch cover, anti-slip bottom
Height: 3’’ Width: 16x16’’
Premium Gel Cushion
The Gel Cushion features a 4-way stretch breathable top cover. Designed for patient pressure ulcer
redistribution; the cushion is 3” thick with a 1”memory foam topper. Rear ties allow for direct chair
attachment. 250lb weight capacity.
16
Seating Cushions/ Heel Protection
Gel Foam Seating Cushions
Durable Rehab Top Cover Gel Foam Cushion: 2” Thick
SP06-GFR216
SP06-GFR218
SP06-GFR220
SP02-GFR222
SP02-GFR224
Available Sizes
Gel Foam Rehab Cover Height:
2’’ Width: 16’’
2’’ Width: 18”
2’’ Width: 20’’
2’’ Width: 22’’
2’’ Width: 24’’
Durable Rehab Top Cover Gel Foam Cushion: 3” Thick
SP06-GFR316
SP06-GFR318
SP06-GFR320
SP02-GFR322
SP02-GFR324
Available Sizes
3’’ Width: 16’’
3’’ Width: 18’’
3’’ Width: 20’’
3’’ Width: 22’’
3’’ Width: 24’’
Featuring a gel center with a foam overlay, this cushion redistributes pressure for prevention. This Gel/Foam
cushion is available in two heights, 2” or 3”. The nylon top cover is non-permeable and the heavy duty
bottom cover is non-slip proof. Rehab style.
Basic Foam Seating Cushions
Durable Rehab Top Cover Basic Molded Foam Cushion: 1.75” Thick
SP06-BF216
SP06-BF218
SP06-BF220
Available Sizes
Basic Molded Foam with Rehab Cover, Height: 1.75’’ Width: 16’’
This basic molded foam cushion helps redistribute seating pressures. The durable rehab top cover wipes
clean and has a non-slip proof bottom cover.
Heel Protection
AchilEaseV2™ PRESSURE RELIEVING HEEL DEVICE
Quick Specs
• Latex Free
• Easily adjust to any height
• Designed with 4 buckles to keep it sucure to the mattress
• Envelops calf and reduces pressure
• Waterproof cover can be cleaned in minutes without being sent to laundry
SP06-ACHILV2 AchilEase Pressure Releiving Heel Device, Reusable
Heel Floats
PRIMUS EXCLUSIVE PATENTED PRODUCT!
Our Patented Pressure Redistribution Heel Device off-loads the pressure from the heel area while
redistributing the weight of the extremity across the calf. We use state of the art contouring with Visco
Elastic foam and is adjustable to accommodate size and weight requirements. This product attaches
directly to the mattress or bed frame.
SD06-503034
SD06-503035
SD06-503036
Small Heel Float, Washable and Reusable
Medium Heel Float, Washable and Reusable
Large / Bariatric Heel Float, Washable and Reusable
Accessories
SD06-ACHILV2SS
SP06-ACHILV2VL
SP06-BUCKLES
Replacement Straps for AchilEase V2
AchilEase- Ease V2 Venous Lift Replacement Part
Replacement buckles for AchilEase
17
Powered Lifts
Lifts and Slings
Patient Lifts
Several factors must be considered before selecting the best lift. Weight of the patient and any special physical
conditions such as muscle control and upper body strength levels are important determinants. Also what type of
lifting tasks are required and are there space limitations? Our experts can assist in selecting your best lift solution.
Call Primus today at 877.638.2776 to get started!
Electric Full Body Patient Lift (400lb) ASSISTED LIFT
Technical Specifications
• Weight Capacity
• Max Height of Spreader Bar
• Min Height of Spreader Bar
• Base Closed External Width
• Base Closed Internal Width
• Base Open External Width
• Base Open Internal Width
• Base Height Clearance
• Mast Height
• Overall Length
• Unit Net Weight
• Lockable Casters
• ISO 13485/ CE Mark
Standard Features
400LBS
67.5”
23”
25.5”
22”
38”
33.5”
4.5”
48”
41”
114.5LBS
YES
YES
• 400lb safe working load
• Low 4.5” base height
• Base opens with easy foot pedal
• Economical replacement parts
• Overload warning signal
• Over charge protection built in
• Digital scale accessory DSC300
Available in Three Configurations
• Legacy - battery pack operation
• Performance - battery pack with charging
station and institutional grade control box.
• Continuous - all performance options with an
extra battery pack / charger.
SD07-PL400EL 400lb Full Body Lift with Legacy Controls
SD07-DPL400E 400lb Full Body Lift with Performance Controls
SD07-PL400E-D 400lb Full Body Lift with Performance Controls + Backup
Electronic Assisted Lift
Maximum patient safety and comfort are built into this highly maneuverable lift. Easy
operating and made to work in confined spaces. Emergency lowering device built into
the actuator. Equipped with six point spreader bar for superior sling application. Controls
are universal and work on all Apex lift types. Built in over load protection to warn
caregiver. Lower base fits under most beds. Durable for demanding hospital and LTC use
yet affordable for home care as well.
• Weight Capacity
• Mast Height
• Base Legs Length
• Unit Net Weight
Standard Features
500LBS
73”
24”
26”
40”
6” or 5”
50”
47”
137LBS
YES
YES
• Continuous - all performance options with
an extra battery pack / charger.
Electronic Assisted Lift
Maximum patient safety and comfort are built into this highly maneuverable lift. Easy
operating and made to work in confined spaces. Emergency lowering device built into
the actuator. Equipped with six point spreader bar for superior sling application. Controls
are universal and work on all Apex lift types. Built in over load protection to warn
caregiver. Lower base fits under most beds. Durable for demanding hospital and LTC use
yet affordable for home care as well.
18
Powered Lifts
• Weight Capacity
• Mast Height
• Overall Length
• Unit Net Weight
Standard Features
600LBS
71”
22”
26.5”
21.75”
43”
38”
6” or 5“
48”
50”
137LBS
YES
YES
• Low 4.5” base height
Bariatric Assisted Lift
Sit to Stand Lifts
Designed to provide the perfect combination of patient safety, weight capacity
and maneuverability. This lift is manufactured to meet the special needs of the
bariatric patient population in hospitals and nursing homes. Caregivers appreciate
the ease of operation and patients are reassured by the stability and overall comfort
provided.
Electric Sit to Stand Lift (400lb) STAND ASSIST LIFT
Standard Features
• Weight Capacity
• Mast Height
• Overall Length
• Unit Net Weight
400LBS
68”
33”
20.75”
20.75”
37”
32.5”
4.5“
40”
40”
117LBS
YES
YES
• 400lb. safe working load
• Fully adjustable knee pad
• Removable foot platform
• Optional buttock support and knee pad.
SD07-SA400EL 400lb STS Lift with Legacy Controls
SD07-SA400E
400lb STS Lift with Performance Controls
SD07-SA400E-D 400lb STS Lift with Performance Controls + Backup
Stand Assist Lift
The ultimate solution for worry free patient transfers between bed, chair or
commode. The right choice for facilities seeking to significantly cut injury risk
associated with antiquated manual patient lifting practices. Combined with the
unique specially designed Apex sling a new level of comfort and safety is achieved.
Standard Features
• Weight Capacity
• Overall Length
• Unit Net Weight
500LBS
68”
33”
25.6”
38”
4.5“
40”
128LBS
YES
YES
• Optional buttock support and knee pad.
SD07-SA500E
Stand Assist Lift
The ultimate solution for worry free patient transfers between bed, chair or
associated with antiquated manual patient lifting practices. Combined with the
19
Powered Lifts and Accessories
• Weight Capacity
• Mast Height
• Overall Length
• Unit Net Weight
Standard Features
600LBS
68”
33”
20.75”
20.75”
37”
32.5”
4.5“
40”
40”
122LBS
YES
YES
• 600 series has double the lifting speed
• Optional buttock support strap and knee
pad strap
SD07-SA600E
HD Stand Assist Lift
The ultimate solution for worry free HD patient transfers between bed, chair or
associated with antiquated manual patient lifting practices. Standard and
bariatric models available both very competitively priced. Combined with the
Do not attempt to use stand assist lifts unless the patient exhibits control over the
upper body, strength to grasp the handles, ability to bear some weight and flexibility
in knees, hips and ankles.
Stand Aid Transdfer (450lb) MANUAL OPERATION
• Seat Width
• Maximum Seat Height
• Maximum Width
• Maximum Height
• Base Height
• Overall Length
• Unit Weight
• Weight Capacity
Standard Features
20”
26.7”
37”
43.3”
4.5”
35.4”
71lbs
450lbs
• 450lb. safe working load (depending on girth)
• Dual knee pads for secure transports
• Fits through narrow door ways
• Optional support strap available
• Affordable alternative to electric stand assists
SD07-STA450 Stand Aid Transfer 450lb working load
Transfer Aid
The transport aid keeps the patient engaged and active in the transfer. Transport
functions of all types are quick and require minimal caregiver assistance. Users grasp
the middle bar and pull themselves up into position. A padded split seat swings out to
allow loading or unloading. The seat then swings back to form a secure and
comfortable seat for transport. An excellent alternative to wheelchairs for
toileting. Rugged construction for years of service in acute care, nursing homes and
private residences.
Scale
Digital Scale for Patient Lifts
NOT FOR USE WITH STAND ASSIST STYLE
• Works with 400, 500, and 600 series full body lifts
• Will not work with other brand lifts
• Apex lifts will not accept other scales
• 0-660LB range
• Battery Operated
SD02-DSC300 Digital scale above spreader bar - fits all 400,500,600 Series Lifts
DSC200 Scale
DSC200 Digital scale provides accurate weights from 0-600lb. Also has optional Kg
metric read outs. Attaches above the spreader bar of the 450E and 650HD models only. Will not work
on other lift brands nor will other scales work on Apexlifts. Battery operated with easy to follow
instructions. May be re-calibrated and all mounting hardware is included. Zero out function to factor
the weight of the sling provides accurate patient weight.
Common Lift Replacement Parts
SD07-KM-BATPAK
SD07-PM-CHGBOX
SD07-PM-PENDNT
(call for those not listed)
Replacement internal batteries for all lifts (2 required)
Charger unit for all lifts
Hand control remote for all lifts
20
Slings
Full Body Slings
Full Body Slings
SD07-SL-R110
SD07-SL-R111
SD07-SL-R112
SD07-SL-R113
SD07-SL-R114
SD07-SL-R115
SD07-SL-R116
SD07-SL-R117
SD02-SL-R140
SD02-SL-R141
Available Sizes
Mesh full body medium (best fit 100-195lbs)
450lb weight capacity
Mesh full body large (best fit 150-300lbs)
Solid full body medium (best fit 100-300lbs)
Solid full body large (best fit 100-195lbs)
Mesh full body medium with commode opening (best fit 100-195lbs)
Mesh full body large with commode opening (best fit 150-300lbs)
Mesh full body extra large with commode opening (best fit 210-400lbs)
Solid Fabric full body extra large (best fit 210-400lbs)
Mesh full body XX large batriatric (best fit 290-600lbs)
Mesh full body XX large batriatric with commode (best fit 290-600lbs)
Universal Slings Mesh Split Leg
Universal Slings Mesh Split Leg
SD07-SL-UM882
SD07-SL-UM883
Available Sizes
Universal mesh medium
400lb weight capacity (best fit 140-200lbs)
Universal mesh large
400lb weight capactiy (best fit 200-400lbs)
Universal Slings Mesh Split Leg with Full Head Support
Universal Slings Mesh Split Leg with Full Head Support
SD07-SL-UMH831
SD07-SL-UMH832
SD07-SL-UMH833
Available Sizes
Universal Mesh small with head support
Universal mesh medium with head support
Universal mesh large with head support
21
Slings
Universal Slings Deluxe Padded Split Leg
Universal Slings Deluxe Padded Split Leg
SD07-SL-UP892
SD07-SL-UP893
SD02-SL-UP894
Universal padded medium
Universal padded large
Universal padded bariatric
Universal Slings Deluxe Padded Split Leg with Full Head Support
Universal Slings Deluxe Padded Split leg with Full Head Support
SD07-SL-UPH861
SD07-SL-UPH862
SD07-SL-UPH863
SD02-SL-UP894
Universal padded small with full head support
Universal padded medium with full head support
Universal padded large with full head support
Universal padded bariatric with full head support
Pediatric Slings
Pediatric Slings
SD07-SL-PM111
SD07-SL-PP121
Pediatric Mesh
(18”-28” torso) patient weight 100lbs or less
Pediatric Padded
(18”-28” torso) patient weight 100lbs or less
Sani Slings Deluxe Padded (Toileting)
Sani Slings Deluxe Padded (Toileting)
SD07-SL-TP331
SD07-SL-TP332
SD07-SL-TP333
SD02-SL-TP334
Sani padded small
400lb weight capacity (26”-42” torso)
Sani padded medium
400lb weight capacity (30”-48”torso)
Hammock padded large
Sani padded bariatric
22
Slings and Fall Mats
Stand Assist Slings Deluxe Padded
Stand Assist Slings Deluxe Padded
SD07-SL-SA661
SD07-SL-SA662
SD07-SL-SA663
SD02-SL-SA664
Stand assist padded small
400lb weight capacity (26”-42”torso)
Stand assist padded medium
Stand assist padded large
Stand assist padded bariatric
Stand Assist Accessories
SD07-SL-SA669
Buttocks support strap for stand assist standard
SD02-SL-SA669B
Buttocks support strap for stand assist bariatric
SD07-SAL1230-KB
Stand assist knee brace for 400lb and 600lb models
Safety Products
PrimeMat™
SP05-PMAT1-G1
PrimeMat™
SP05-PMAT1-B2
23
Safety Products
Fall Prevention - Change Pad Indicator
Change Pad Indicator ALARMING FALL MONITOR
SD05-TL2100CP
Change Pad resident alarm box. Auto reset,
check pad light, status light, and nurse call port.
Warranty 1 yr
Fall Monitor
Timed technology automatically tells the caregiver when to replace an expired
sensor pad. Tamper proof patented caregiver key (pictured) mode allows only the
caregiver to reset the monitor.
Change Pad: Bed and Chair Pads
SD05-TBWI
SD05-TBRI
SD05-TCWI
SD05-TB90 SD05-TC90 Change Pad Bed Pad 20 x 30 Warranty 1yr
Change Pad Bed Pad 10 x 30 Warranty 1yr
Change Pad Chair Pad 10 x 15 Warranty 1yr
Change Pad 90 Day Bed Pad 20 x 30 Warranty 90 days
Change Pad 90 Day Chair Pad 10 x 15 Warranty 90 days
Standard Release Alarming Seat Belt
SD05-TL2109
SD05-TL210972
Standard Release Alarming Seat Belt
Adjustable Belt 20” to 54”
XL Extended Length Standard Release Alarming Seat Belt
Velcro Release Alarming Seat Belt
SD05-TL2109V
SD05-TL210972V
Velcro Release Alarming Seat Belt
XL Extended Length Velcro Release Alarming Seat Belt
Alarming Floor Mat
SD05-FM05
Alarming Floor Mat 36” x 24” Warranty 90 days
• Ghost/Wireless versions available
• Activates alarm when pressure is applied
• Great for use at bedsides and doorways
24
Safety Products
Fall Prevention - Ghost Wireless
Wireless ‘Ghost’ Monitor
ALARMING FALL MONITOR
SD05-TL2100G
Wireless Resident Alarm Box, check pad
and low battery lights.
Warranty
1 yr
Ghost Monitor
The SMART Ghost Cord system frees caregivers from managing cords between
sensor pads and the alarm monitor allowing more options for monitor placement*
(even outside the room) as well as reducing tripping hazards. Moving the alarm
monitor outside the room has two primary benefits: Staff members hear the alarm
better and residents are not disturbed by alarm noise.
Change Pad: Bed and Chair Pads
SD05-GBTRI
Wireless Bed Pad with Transmitter 10 x 30
Warranty 1yr
Wireless Chair Pad with Transmitter 10 x 15
Warranty 1yr
Wireless 90 Day Bed Pad with Transmitter 10 x 30
Warranty 90 days
Wireless 90 Day Chair Pad with Transmitter 10 x 15
Warranty 90 days
Wireless Floormat with Transmitter 24 x 48
Warranty 1yr
SD05-GCTWI
SD05-GBT90
SD05-GCT90
SD05-FMT07C
Fall Prevention - Pull String Monitors
Basic Pull String Monitor
SD05-BPS-01
Basic pull string monitor
Warranty
6 mos
Basic
BPS-01 Pull-string monitors reduce falls by alerting staff when a resident attempts to
get out of their chair or bed. The pull-string monitors from Smart Caregiver feature a
cord that attaches to the resident’s clothing via a garment clip. When the resident
attempts to get out of their chair or bed, the pull-string disengages alerting the
caregiver. Adjustable volume and battery indicator.
Full Featured Pull String Monitor
SD05-TL02
Full featured pull string monitor w/
magnet switch
Warranty
1 yr
Full Featured
TL-02 Pull-string monitors reduce falls by alerting staff when a resident attempts to
get out of their chair or bed. The pull-string monitors from Smart Caregiver feature a
cord that attaches to the resident’s clothing via a garment clip. When the resident
attempts to get out of their chair or bed, the pull-string disengages alerting the
caregiver.
25
Safety Products
Economy Pull String Monitor
SD05-TL02P
Economy Pull String Alarm
Warranty
6 months
Economy Monitor
Basic pull string monitor. Magnetic alarm clip and status light.
Pull String Monitor with Nurse Call Port
SD05-TL2200PS
Pull String Monitor w/ pause button, nurse call port
and status light
Warranty
1 yr
Full featured pull-string monitor
The SMART® alarm in an alarming device used in conjunction with a multitude of fall
prevention products. Simple, yet effective in design the monitor will sound when the
cord and trigger is pulled from the device. This can be used with our PrimeSnap® to
further mitigate patient injury. When the patient falls foward out of a chair or moves
away from thier bed; they will separate the trigger and sound the alarm so the
caregiver can prevent a fall or other risk.
Lifetime Warranty Monitor with Nurse Call Port
SD05-TL2000
Pull String Monitor w/ pause button, nurse call port and
status light
Warranty
Lifetime
Lifetime Warranty Fall Monitor
Lifetime warranty version of the TL2200PS monitor. Includes ‘unbreakable’ outer
protective case. All standard features inluding nurse call port, status light, pause
button,
Fall Prevention - Motion Sensors
Motion Sensor Alarm WITH SWIVEL BRACKET
SD05-TL2700
Motion alarm w/ Swivel bracket
Warranty
90 day
Motion Alarm
The TL-2700 - Motion Sensor Fall Alarm Monitor has a wide, infrared detecting area
to report movement when interrupted. With a horizontal range of 26 feet, a vertical
range of 10 feet and battery operated the TL-2700 Motion Detector With Alarm can
be placed most anywhere in the residents room where caregivers would like to be
notified of movement. The TL-2700 Stand Alone Motion Sensor alarm has an 80-90
decible level.
26
Safety Products
Motion Sensor and Receiver
SD05-TL2800
Motion sensor and reciever
Warranty
90 day
Motion Sensor
The Smart Caregiver TL-2800 Motion Sensor and Wireless Hallway Alarm is an
exeptionally easy monitoring system to use. Set up is simple for the TL-2800 Motion
Sensor and Hallway Alarm, just insert the batteries, place the motion sensor and
wireless alarm where desired and the TL-2800 Motion Sensor Alarm System is ready
to use. Place the motion sensor next to the bed or a doorway and when the sensor
field is interrupted a signal is sent to the wireless alarm.
Motion Sensor and Pager
ONE TO ONE SYSTEM
SD05-5102MP
Motion sensor and pager
Warranty
90 day
One to one pager system
The Smart Caregiver TL-5102MP Motion Sensor and Pager alerts the caregiver of the
resident’s activity via pager without disrupting residents, thanks to the silent motion
sensor monitor in the resident’s room. The silent resident motion sensor monitor
eliminates noisy alarms that may be bothersome to residents, instead only alerting
the caregiver through the pager.
Window and Door Alarm
SD05-909223
Window/Door Alarm
sold in packs of 5
Warranty
6 months
Door / Window Alarm
Prevents resident elopements. Installs in seconds with adhesive backing.
Three-position switch-off, chime, alarm. Resets itself when door or window is closed.
Perfect for supply closets, medicine cabinets, and doors to other “off-limits” areas.
Batteries included. Replacement guaranteed for six months.
Accessories
PrimeSnap™
INJURY MITIGATING SAFETY PIN ALTERNATIVE
SD05-PSNAP02
PrimeSnap™ resident alarm fastener
sold in packs of 5
Resident Fastener
The PrimeSnap® is used directly with fall monitors to attach cables/cords to patients
without causing injury. Flexible contruction helps to prevent sores and bruising. Soft
contoured edges prevent cuts and scraping. No Pins to go through clothing, no
chance of puncturing the user. Easy attachment.
27
Safety Products
Replacement Parts
SD05-AC02
AC adapter for TL2100 series monitors, 9 volt
SD05-BC03
Replacement battery cover for TL2100 monitor series
SD05-CK01
SD05-14PLUG15
SD05-NCS02
SD05-PS02
SD05-PS02P
SD05-PS04
Replacement caregiver key
15’ Nurse call cord, 1/4” round
Nurse call splitter
Replacement pull string and magnet for TL02 and TL2000 monitors
Replacement pull string, magent and clip for TL02P monitors
Replacement pull string, magent for TL3000 and TL2200PS monitors
SD05-MTP01
1/4” phone plug
SD05-MC01
Crimping tool to replace 1/4” phone plugs on bed and chair pads
SD05-RC02
Replacement break away USB cords for change pad bed pads
SD05-TM05
Replacement transmitter for Ghost Wireless pads and floor pads
28
Resident Care
Resident Care
Walking Aids
18” Two Button Adult Walker WITH 5” WHEELS
SD11-ROS-WK42051-4
Depth Folded:
User Height:
Walker Height:
Weight Capacity
4 1/2”
5’2”-6’4”
32-39”
300lbs
Quick Features
Folding Walker, Two Button, 5” Wheels
Product Weight:
Inside Handgrip Width:
Base Width:
Base Depth:
7.6lbs
18”
25 3/4”
20”
21 1/2” HD Two Button HD Walker WITH 5” WHEELS
Quick Features
HD Folding Walker, Two Button
SD11-WK450W
Depth Folded:
5 1/5”
User Height:
5’2”-6’4”
Walker Height:
31-41”
Weight Capacity 500lbs
Product Weight:
Base Width:
Base Depth:
9.1lbs
21 1/2”
25 1/2”
17”
20” HD Two Button Bariatric Walker
Quick Features
Bariatric Folding Walker, Two Button
SD02-WKHD-600
Depth Folded:
User Height:
Walker Height:
Weight Capacity
5 1/5”
5’2”-6’4”
32-39”
600lbs
Product Weight:
Base Width:
Base Depth:
13.5lbs
20”
23”
21”
Rollators / Transport Chairs
24” Deluxe Rollator 6” Wheels
SD11-30018 (Blue Steel Color)
SD11-30020 (Burgundy Color)
Quick Features
6” Wheels
Curved Back Rest
Padded Seat
Basket
29
Resident Care
24 1/4” Deluxe Rollator 8” Wheels
SD11-30022
SD11-30024
(Blue Steel Color)
(Burgundy Color)
Quick Features
8” Wheels
Curved Back Rest
Padded Seat
Zippered Pouch
25” Bariatric Rollator
SD11-RL-12010-RD
Quick Features
Bariatric Rollator
Padded Seat
Bath Safety and Commodes
C2000 1000LB CAPACITY COMMODE/SHOWER CHAIR
Quick Specs
• Width between arms
• Overall Width
• Width of seat
• Depth of seat
• Height
• Weight capacity
• Product weight
SP02-PPC2000
37”
401/2”
36”
21”
191/4”
1000lbs
51lbs
Quick Features
• 4 Easy Rolling Casters for easy maneuverability
• Arm Rests drop with touch of a lever
• Toilet paper holder
• Pale lid holder
• Optional replacement commode pail
• Extra large opening in toilet seat
• Padded seat and arm rests
• Steel construction with powder coated finish
Prime Plus Bariatric Commode 1/cs 1000lb capacity
Shower chair and commode
The PrimePlus™ C2000 is our high capacity 1000lb capable Commode and Shower Chair. The chair
features an under seat pail rack and lid storage. Removable back rest and collapsable armrests allow
for easy ingress and egress.
22” Wide Three In One Commode
SD11-BTH-31C
3 in 1 Commode, Elongated Seat. Tool Free Assembly
Width Between Arms:
Outside Width:
Seat Depth:
17”
22”
16 1/2”
Adjustable Seat Height:
Seat Width:
Weight Capacity:
15 1/2” -23 1/2”
13 1/2”
300lbs
31” Wide HD Bariatric 3 in 1 Commode
SD02-BTH-HV31
Width Between Arms:
Outside Width:
Seat Depth:
Bariatric 3 in 1 Commode
26”
31”
16 1/2”
Seat Width:
Weight Capacity:
17 1/2” -24 1/2”
13 3/4”
600lbs
30
Resident Care
24” HD Extra Wide Commode
SD11-BTH-COM
Width Between Arms:
Outside Width:
Seat Depth:
24” Surface Extra Wide
24”
26”
18”
Seat Width:
Weight Capacity:
16 1/2” -23 1/2”
23”
650lbs
24” HD Bariatric Drop Arm Commode
SD02-BTH-DAC
Width Between Arms:
Outside Width:
Seat Depth:
HD Bariatric Drop Arm Commode
23”
26 1/2”
18 1/2”
Seat Width:
Weight Capacity:
20” -24”
29”
600lbs
26” Bariatric Drop Arm Commode
SD02-BTH-26BDAC
Width Between Arms:
Outside Width:
Seat Depth:
26” WIde Bariatric Commode
26”
29 1/4”
21”
Seat Width:
Weight Capacity:
20 1/2”
26”
800lbs
36” Bariatric Drop Arm Commode
SD02-BTH-36BDAC
Width Between Arms:
Outside Width:
Seat Depth:
36” Wide Bariatric Commode
36 1/2”
39 1/2”
21”
Seat Width:
Weight Capacity:
25”
36”
1000lbs
19 1/2” Wide Shower Chair w/ Back
SD11-BTH-SCWB
Width Outside Legs:
Seat Width:
Depth Outside Legs:
Weight Capacity:
Shower Chair w/ back. Tool free assembly
16 1/2”
19 1/2”
19”
300lbs
Seat Depth:
Adjustable Height:
Product Weight:
11 1/2”
14 1/2”-20 1/2”
7.5lbs
31
Resident Care
20” Wide HD Bariatric Shower Chair w/ back
SD02-BTH-HDWB
Width Outside Legs:
Seat Width:
Depth Outside Legs:
Weight Capacity:
HD Bariatric Shower Chair w/back. Tool free assembly
18 3/4”
20”
14 1/2”
500lbs
Seat Depth:
Adjustable Height:
Product Weight:
12”
15”-21”
10lbs
27” Wide Adjustable Transfer Bench
SD11-BTH-TFR
Width Outside Legs:
Seat Width:
Depth Outside Legs:
Weight Capacity:
Adjustable Transfer Bench, Blow Molded bench and back
28”
27”
19”
300lbs
Seat Depth:
Adjustable Height:
Product Weight:
16”
18”-22”
10.3lbs
26 1/2”HD Bariatric Transfer Bench
SD02-BTH-HD6G
Width Outside Legs:
Seat Width:
Depth Outside Legs:
Weight Capacity:
HD Bariatric Adjustable Transfer Bench. Reinforced
31 1/2”
26 1/2”
17 1/2”
500lbs
Seat Depth:
Adjustable Height:
Product Weight:
16”
18”-22”
10.4lbs
32
Resident Care
Transport and Wheelchairs
Full Reclining Wheelchair 16x16
SD11- SSP16RBDDA
Detachable Desk Arms
Swing Away Elevating Legrests
Width - 23”
Width Closed - 12”
Height - 50”
Seat Depth - 16”
Back Height - 21/31”
SD11- SSP18RBDDA
Width - 25”
Width Closed -12”
Height - 50”
Seat Depth - 16”
Back Height - 21/31”
SD11- SSP20RBDDA
Width - 28”
Height - 50”
Seat Depth - 16”
Back Height - 21/31 ”
Heavy Duty Wheelchair 26” Wide
SD02- STD26ECDDA
Legrests sold separate
Width - 34.5”
Height - 35”
Seat Depth - 20”
Back Height - 18”
700 lb weight capacity
SD02- STD28ECDDA
Width - 37”
Width Closed - 14.5”
Height - 35”
Seat Depth - 20”
Back Height - 18”
33
Resident Care
SD02- STD30ECDDA
Width - 39”
Height - 35”
Seat Depth - 20”
Back Height - 18”
Bariatric Swing Away Elevating Leg Rests
SD02-PHELR
Bariatric Swing Away Leg Rests (Use with Sentra EC Ext Wide Wheelchairs)
SD02- STD22ECDDA-SF
Swing Away Foot Rests
Width - 30”
Height - 36”
Seat Depth - 18”
Back Height - 18”
SD02- STD22ECDDA-ELR
Elevated Leg Rests
Width - 30”
Height - 36”
Seat Depth - 18”
Back Height - 18”
SD02- STD24ECDDA-SF
Width - 32”
Height - 36”
Seat Depth - 18”
Back Height - 18”
34
Resident Care
SD02- STD24ECDDA-ELR
Elevated Leg Rests
Width - 32”
Height - 36”
Seat Depth - 18”
Back Height - 18”
Wheelchair 16 x16
SD11- SSP216DDA-SF
Vinyl Upholstery
Width - 24”
Height - 36”
Seat Depth - 16”
Back Height - 16”
Wheelchair 16 x16
SD11- SSP216DDA-ELR
Elevated Leg Rests
Vinyl Upholstery
Width - 24”
Height - 36”
Seat Depth - 16”
Back Height - 16”
Wheelchair 18 x16
SD11- SSP218DDA-SF
Vinyl Upholstery
Width - 26”
Height - 36”
Seat Depth - 16”
Back Height - 16”
Wheelchair 18 x16
SD11- SSP218DDA-ELR
Elevated Leg Rests
Vinyl Upholstery
Width - 26”
Height - 36”
Seat Depth - 16”
Back Height - 16”
35
Resident Care
Wheelchair 20 x16
SD11- SSP220DDA-SF
Vinyl Upholstery
Width - 28”
Height - 36”
Seat Depth - 16”
Back Height - 16”
Wheelchair 20 x16
SD11- SSP220DDA-ELR
Elevated Leg Rests
Vinyl Upholstery
Width - 28”
Height - 36”
Seat Depth - 16”
Back Height - 16”
Wheelchair Accessories
SD11-ROS-ANT1
SD11-ROS-ANT2
SD11-SM008
SD11-SM011
SD11-SM2-2
SD11-SM2-2W
Anti-tippers for K1, K2 and K7 series wheelchairs
Anti-tippers for K3 and K4 series wheelchairs
Universal Fit Rear Anti-tippers
Universal Fit Front Anti-tippers
Universal Anti-Rollback, fits 16” to 20” Wheelchairs
Universal Anti-Rollback, fits 22” to 24” Wheelchairs
PrimeMat™
SP05-PMAT1-G1
move easily over the Prime Mat while being non hazardous to tripping.
Independently tested against industry leaders, the Prime Mat has been proven to
PrimeMat™
SP05-PMAT1-B2
move easily over the Prime Mat while being non hazardous to tripping.
Independently tested against industry leaders, the Prime Mat has been proven to
36
Case Goods
LTC Furnishings™
Brownlee Woods Case Goods
The Brownlee collection is our entry
level case good collection. Featuring
a durable melamine construction and
a scalloped foot board; the Brownlee
is driven to compliment both cost and
aesthetics.
Available in our full line of standard
colors the Brownlee can be matched
to suit your needs. Call for custom color
options*.
* Custom colors may increase cost or
leadtime.
Quick Specs
•
•
•
•
•
•
•
•
Available Styles
Choice of our full standard color line *
Cabinet- High Pressure Thermofused Melamine
Top - High Pressure Thermofused Melamine
Matching Vynil edge on Top
Drawers and doors have 1mm PVC edge
Four sided vinyl wrapped drawer boxes
Replaceable drawer fronts
Drawer slides epoxy coated - 100lb rating
SP09-C132M-BDSC-2
Available Toe Kicks
Scalloped
Flat
Arched
Standard Colors
Kensington Maple
Solar Oak
Wild Cherry
Montana Walnut
Figured Mahogany Windsor Mahogany
ONE DOOR, ONE DRAWER BEDSIDE
SIZE: 21.25 WIDE X 17.25 DEEP X 30.00 HIGH
SP09-C132M-BDSC-3
THREE DRAWER BEDSIDE
SP09-C132M-CHST-3
CHEST - 3 DRAWER
SP09-C132M-CHST-3W CHEST - 3 DRAWER EXTRA WIDE
SP09-C132M-CHST-4
CHEST - 4 DRAWER
SP09-C132M-CHST-6
CHEST - 6 DRAWER 3 X 3
SP09-C132M-HUTC-1
HUTCH - BEDSIDE
SIZE: 21.25 WIDE X 10.00 DEEP X 18.00 HIGH SP09-C132M-WDRB-01 ONE DOOR, NO DRAWER WARDROBE
SP09-C132M-WDRB-02 ONE DOOR, TWO DRAWER WARDROBE
SP09-C132M-WDRB-30 TWO DOOR, TWO DRAWER WARDROBE
SP09-C132M-WDRB-20 TWO DOOR, NO DRAWER WARDROBE
SP09-C132M-ARM-03
THREE DRAWER ARMOIRE
* Custom color and trim options may increase both cost and product delivery lead time
37
Case Goods
Smokey Hollow Case Goods
The Smokey Hollow collection is our
upscale economy series of case good
products. Featuring a high pressure
laminiate top, this line uses buried wood
on the leading edge giving the Smokey
Hollow products a look and feel closer
to a high end counterpart.
Available in the full array of standard
colors to meet your all of your tastes
and needs. Call for custom color
options.*
*Custom colors may increase cost and
leadtime.
Quick Specs
•
•
•
•
•
•
•
Cabinet - High Pressure Thermofused Melamine
Top - High Pressure Laminate with Buried Wood
Available Toe Kicks
Scalloped
Flat
Arched
Standard Colors
Kensington Maple
Solar Oak
Wild Cherry
Montana Walnut
Available Styles
SP09-C133M-BDSC-2
SP09-C133M-BDSC-3
SP09-C133M-CHST-3
CHEST - 3 DRAWER
SP09-C133M-CHST-4
CHEST - 4 DRAWER
SP09-C133M-CHST-6
SP09-C133M-HUTC-1
HUTCH - BEDSIDE
SP09-C133M-ARM-03
38
Case Goods
Mill Creek Case Goods
The Mill Creek collection is our
upscale line of premium case goods.
Featuring solid wood edge drawer
fronts and tops, the Mill Creek series
makes an outstanding addition to your
room.
Aside from the premium edging and
scalloped toe kick, the Mill Creek is
available in our full color line to best suit
your application. Call for custom color
options.*
*Custom colors may increase cost and
leadtime.
Quick Specs
•
•
•
•
•
•
•
Cabinet- High Pressure Thermofused Melamine
Top -High Pressure Laminate with Buried Wood
Drawers and doors have solid wood edges
Available Styles
SP09-C135M-BDSC-2
Available Toe Kicks
Scalloped
Flat
Arched
Standard Colors
Kensington Maple
Solar Oak
Wild Cherry
Montana Walnut
SP09-C135M-BDSC-3
SP09-C135M-CHST-3
CHEST - 3 DRAWER
SP09-C135M-CHST-4
CHEST - 4 DRAWER
SP09-C135M-CHST-6
SP09-C135M-HUTC-1
HUTCH - BEDSIDE
SP09-C135M-ARM-03
39
Case Goods
Brier Hill Case Goods
Brier Hill cabinetry features our stylish
cabinet line available in both Solar Oak
and Wild Cherry colors. The Briar Hill
offers higher end flavor with a lower
cost.
Available in a wide array of styles to suit
your tastes and needs.
Quick Specs
• Cabinet - High Pressure Thermofused Melamine
• Thermofoil top, doors, drawer fronts
and toe board
• Four sided vinyl wrapped drawer boxes
• Replaceable Drawer fronts
• Drawer Slides - Epoxy Coated - 100lb rating
Available Toe Kicks
Scalloped
Flat
Arched
Standard Colors
Solar Oak
Wild Cherry
Available Styles
SP09-C134M-BDSC-2
SP09-C134M-BDSC-3
SP09-C134M-CHST-3
CHEST - 3 DRAWER
SP09-C134M-CHST-4
CHEST - 4 DRAWER
SP09-C134M-CHST-6
SP09-C134M-HUTC-1
HUTCH - BEDSIDE
SP09-C134M-ARM-03
40
Case Goods
Bel Aire Case Goods
A stylish offering of our premium
casegoods featuring an angular
retro-modern design. Avaialble in two
tone finish options; the Bel Aire line can
easily be configured to add an extra
touch of flair to your living quarters.
Highlighted features include a solid
wood face frame on the front of the
cabinet.
Accent Stain Combinations are:
Wild Cherry - Fonthill Pear
Figured Mahogany - Dark Mahogany
Solar Oak - Light Walnut
Quick Specs
•
•
•
•
•
•
•
•
Two tone color combo
Cabinet - High Pressure Thermofused Melamine
Top - High Pressure Laminate - Buried wood edges
Solid wood face frame on front of cabinet
Available Toe Kicks
Scalloped
Flat
Arched
Standard Colors
Solar Oak
Wild Cherry
Figured Mahogany
Available Styles
SP09-C136M-BDSC-3
SP09-C136M-CHST-3
CHEST - 3 DRAWER
SP09-C136M-CHST-4
CHEST - 4 DRAWER
SP09-C136M-CHST-6
SP09-C136M-HUTC-1
HUTCH - BEDSIDE
SP09-C136M-ARM-03
SP09-C136M-BDSC-2
41
Case Goods
Bronze Lake Case Goods
The Bronze Lake collection represents
our highest level of case good
selection; complete with ornate real
wood edges, door/ drawer fonts, and
solid wood legs. The Bronze Lake
features only select case good designs
and holds unique dimensions to futher
separate itself from the base case good
lines.
Available in our full line of standard
colors the Bronze Lake can be matched
to suit your needs. Call for custom color
options*.
Quick Specs
• Choice of our full standard color line *
• High pressure laminate case
• Buried wood edges with high pressure
laminate top cover
• Drawer front and door are raised solid wood
• Solid wood feet
• Five sided vinyl wrapped drawer boxes
• Doors and feet stained and sealed with
two part catalyzed finish
• Drawer slides epoxy coated - 100lb rating
* Custom colors may increase cost or
leadtime.
Available Styles
SP09-C144M-BDSC-3
SP09-C144M-CHST-3
CHEST - 3 DRAWER
SIZE: 30.00 WIDE X 17.00DEEP X 32.00 HIGH
SP09-C144M-CHST-4
CHEST - 4 DRAWER
SP09-C144M-CHST-6
SP09-C144M-WDRB-01 ONE DOOR, NO DRAWER WARDROBE
SP09-C144M-BDSC-2
Available Toe Kicks
Scalloped
Flat
Arched
Standard Colors
Kensington Maple
Solar Oak
Wild Cherry
Montana Walnut
42
Case Goods
Drawer Pull Options
Primus Medical offers multiple drawer
pull and handle options to suit the style
and needs of your case good order.
Each pull has been hand selected by
Primus Medical to appeal to a wide
range of tates while complimenting the
entire case good line.
Handle Styles
7523
Polished Lace
Continental
Call for custom options.
7475
Banded Pewter
Other Options
SP09-Lock
SP09-DSU
SP09-CK
Lock option for top drawer
Drawer Slide
Ball Bearing Upgrade
Caster Kit (Bedside Only)
7391
Antique Brass
7488
Satin Nickel
Knob Styles
8587
Burnished Brass
7521
Brushed Rope
7420
Satin Nickel
Knob
7520
Antique Brass
Knob
43
Case Goods
Finished Drawers and Storage
All five styles of cage goods come
complete with finished drawers and
interior storage space. High quality vinyl
wraps can be found in across the
cabinet lines.
Wardrobes and Armoire units feature
hanging beams for easy garment
storage.
Multiple Wardrobe Options
Finished Interiors
Garment hanging bars included
44
Case Goods
Quick Ship Furniture
Quick Ship Furniture
These select case good products are
availble for rapid shipping times and
lower cost.
With three standard options available
in two finished colors, the Quick Ship
option gives you a hassle free option to
furnish on a budget for cost and time.
Call today for more information!
Available Styles
SP09-C132M-BDSC-2-1
SP09-C132M-CHST-4-1
CHEST - 4 DRAWER
SP09-C132M-WDRB-02-1 ONE DOOR, TWO DRAWER WARDROBE
Solar Oak
Windsor Mahogany
Ships directly from manufacture in 10 days!
45
OTB Tables
Over the Bed Tables
Over the Bed Table
Over the bed tables make an excellent addition to the
resident room. These give the resident
a place to set things like books, newspapers, food and puzzles while they
are in bed.
Height adjustable with a low base for
easy clearance; the OTB tables make
an easy choice for any bed.
Available in all standard
laminate finishes. A chrome base is
standard.
SP09-OBT
Standard Colors
Kensington Maple
Solar Oak
Also Available
Wild Cherry
Standard Overbed Table
Silver Vien Finish
Walnut top ONLY
SD01-13067
Montana Walnut
Figured Mahogany
Windsor Mahogany
Extra Low OTB Tables
Lowest base height
Short Height operating range
Fall risk specific
Call for more information!
Bariatric OTB Tables
Heavy duty base
Raised Height operating range
Oversized frame
Call for more information!
46
8401 Southern Blvd.,
Boardman, OH 44512
877.638.2776
330.965.9683
DOC-040-0500 REV 016

PrimeCare® Beds

Transcription

Similar documents

Feel the BeauL ve

CC6022 SS6020 Convoluted Foam Mattress Cushion Insert

CC6022 SS6020 Convoluted Foam Mattress Cushion Literature

serta - City Wide Mattress

king koil laura ashley

Aerobed Active Mattress

HEAVY CAPACITY BEDS

Tranquility 10-In. Memory Foam Mattress

Cascade

Dukono - Carlyle Collective