Hardware Products
Transcription
Hardware Products
Door Hardware .................................. 408-417 Driver Pins & Rivets ................................. 361 Exit Bars ................................................... 386 Hinges................................................ 430-432 Key Blanks & Keying Supplies ......... 396-401 Keying Machines ...................................... 402 Keying Services ................................ 394-395 Latches .............................................. 387-388 Locks ................................................. 368-386 Anchors ..................................................... 362 Mailboxes & Mailbox Locks.............. 364-367 Bi-Fold Door Hardware...................... 436-440 Nails ................................................... 354-355 Blinds ................................................. 451-455 Padlocks ............................................ 403-404 Bolts, Nuts & Washers...................... 359-360 Patio Door Security/Hardware.......... 413-417 By-Pass Door Hardware ........................... 435 Screening........................................... 424-427 Cabinet Hardware ............................. 441-442 Screen/Storm Door Hardware .......... 412-413 Cabinet Knobs/Pulls .......................... 442-445 Screws ............................................... 356-359 Carpet Binder Bars................................... 429 Shelving ............................................. 446-449 Casement Operators ................................ 419 Toggle Bolts.............................................. 363 Closet Rods & Hardware .................. 446-449 Traverse Rods & Hardware .............. 449-450 Cylinders, Lock.................................. 389-392 Weatherstripping ............................... 427-429 Deadlocks ................................... 386,392-393 Window Balances & Parts ................ 420-423 Door Bells & Knockers ..................... 405-407 Window Security & Hardware .......... 417-419 Door Chains .............................................. 405 Window Shades & Hardware ................... 450 Nails www.cwip.com HARDWARE 354 Nail Size Chart Bright Finishing Nails Brad Head/Diamond Point Bright Common Nails Flat Head/Diamond Point Head Size Approx.# U/M Cwip # Size Head Size Approx.# U/M 4D - 1-1/2” 1/4” 1,470 Bx/ 5 lbs. 14508 4D - 1-1/2” 12 2,860 Bx/ 5 lbs. 6D - 2” 17/64” 835 Bx/ 5 lbs. 14503 6D - 2” 10 1,120 Bx/ 5 lbs. 12349 8D - 2-1/2” 9/32” 505 Bx/ 5 lbs. 14525 8D - 2-1/2” 9-1/2 890 Bx/ 5 lbs. 11640 10D - 3” 5/16” 330 Bx/ 5 lbs. 22055 10D - 3” 8-1/2 560 Bx/ 5 lbs. 13493 12D - 3-1/4” 5/16” 305 Bx/ 5 lbs. 12347 16D - 3-1/2” 11/32” 235 Bx/ 5 lbs. 12348 20D - 4” 11/32” 145 Bx/ 5 lbs. Cwip # Size 13545 13523 Cut Masonry Nails Hardened Steel Fluted Masonry Nails Cwip # Size Head Size Approx.# U/M 15844 1” 5/16 900 Bx/ 5 lbs. 25093 1-1/2” 5/16 500 Bx/ 5 lbs. 21562 2” 5/16 490 Bx/ 5 lbs. 20078 2-1/2” 5/16 390 Bx/ 5 lbs. Cwip # Size Approx.# U/M 13204 4D - 1-1/2” 136 Bx/ 1 lb. 16142 6D - 2” 88 Bx/ 1 lb. 19806 8D - 2-1/2” 70 Bx/ 1 lb. 16212 10D - 3” 50 Bx/ 1 lb. Brown Panel Nails Carpet Bar Nail Interior panel nail, annular thread, hardened steel. Cwip # Size Color U/M 16411 1-1/4” Aluminum Bag/1 lb. 15645 1-1/4” Gold Bag/1 lb. Size Approx.# U/M 38227 1” 624 Pkg/6 oz. 19811 1-5/8” 624 Pkg/6 oz. Cwip # Roofing Nails Hot Dipped Galvanized Flooring Nails Spiral thread. For tongue and groove flooring. Size Cwip # 35123 7D - 2-1/4” $ BEST VALUE Large flat head, barbed, diamond point. U/M Box/1 lb. ECO-FRIENDLY Cwip # Size Head Size Approx.# U/M 13189 1-3/4” 7/16” 690 Bx/ 5 lbs. Nails www.cwip.com Plasterboard Nail Blued Flat Head Long Diamond Point 13 Gauge Large head, annular threads, 12 gauge. Approx. #:1300. Cwip # 12879 Size Head U/M Cwip # 1-5/8” 19/64” Bx/ 5 lbs. Size 20080 Head U/M 1-1/4” 19/64” Bx/ 1 lbs. Cement Coated Sinker Countersunk Head Diamond Point Cwip # Size U/M 13463 8D - 2-3/8” Box/5 lbs. 24260 12D - 3-1/8” Box/5 lbs. 24898 16D - 3-1/4” Box/5 lbs. Wire Brads Wire Nail 17 Gauge Cwip # Size Gauge U/M 35284 3/4” 16 2 oz. Pkg Cwip # Size U/M 39986 3/4” 18 2 oz. Pkg 21493 7/8” Box/2 oz. 38810 1” 16 2 oz. Box 36465 1-1/4” 16 2 oz. Box Poultry Netting Staples Galvanized - 14 Gauge Cwip # Size/Head U/M 21532 3/4” - 3/16” Pkg/1 lb. Screws Drywall Bugle Head Screws Fine Threads Cwip # Size Wgt.lb. U/M 17862 6 x 1” 3.4 Bx/1000 12435 6 x 1-1/4” 4.2 Bx/1000 19520 6 x 1-5/8” 5.1 Bx/1000 17910 6 x 2” 3.6 Bx/500 17869 7 x 2-1/2” 4.3 Bx/500 17885 8 x 3” 3.3 Bx/250 Drywall Bugle Head Screws Coarse Threads Cabinet Mounting Screws Truss - Course Thread Cwip # Size U/M 38115 10 x 2-1/2” Bx/100 Cwip # Size Apprx.# 33291 33290 33292 33293 33294 33295 6 x 1” 6 x 1-1/4” 6 x 1-5/8” 6 x 2” 8 x 2-1/2” 8 x 3” 1570 1340 1060 890 525 425 25836 25832 25716 25835 25792 25759 6 x 1” 6 x 1-1/4” 6 x 1-5/8” 6 x 2” 8 x 2-1/2” 8 x 3” 10000 8000 5000 3500 2500 2000 U/M Bx/5 Bx/5 Bx/5 Bx/5 Bx/5 Bx/5 lb. lb. lb. lb. lb. lb. Case Case Case Case Case Case Phillips Flat Head Wood Screw Assortment Kit Cwip # U/M Size Quantity Size Quantity 34999 Kit 8 x 1/2” 8 x 3/4” 80 80 8 x 1-3/4” 8 x 2” 40 40 8 x 1” 80 8 x 2-1/2” 40 8 x 1-1/4” 60 8 x 3” 20 8 x 1-1/2” 50 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Drywall Nail Plain Finish 355 Screws (Continued) HARDWARE 356 www.cwip.com Slotted Flat Head Wood Screws Zinc Plated - Box/100 Thrd. Size 4 6 8 10 12 14 Cwip # 12272 17315 Phillips Flat Head Steel Wood Screws Zinc Plated - Box/100 Thread Size Size 3/8” 5/8” 4 17423 1/2” 17570 2-1/2” 12271 1” 17420 17311 6 Cwip # Size 17251 1/2” 17253 3/4” 17100 17533 1/2” 3/4” Thread Size 10 17103 1” 1-1/4” 17124 1/2” 1-1/2” 17126 3/4” 17457 1-3/4” 17128 1” 17500 17419 2” 3-1/2” 17129 1-1/4” 17498 2” 17131 1- 3/4” 17372 2-1/2” 17132 2” 17343 1” 17133 2-1/2” 17497 1-1/2” 17134 3” 17416 3” 17342 2” 17495 3-1/2” Pan Head Slotted Type-A Sheet Metal Screw Zinc Plated - Box/100 8 Thrd. Size Cwip # Size 4 81166 1/2” 14851 1/2” 14765 1” 14791 6 8 17130 1-1/2” Thrd. Size Cwip # 12 14762 3/4” 14673 7/8” 1” 14734 1-1/4” 5/8” 14804 2-1/2” 14776 3/4” 14745 3” 14764 1” 14761 1-1/2” 14744 2” 14788 2” 14849 1-1/2” 14794 2-1/2” 12 14 Size 17150 17152 3/4” 1” 17153 1-1/4” 17154 1-1/2” 22101 1-3/4” 17155 2” 17157 2-1/2” 17158 3” 17166 1-1/2” 17167 2” 17169 2-1/2” 17170 3” Size 14779 10 Cwip # Pan Head Slotted Metal Screw Assortment Kit Cwip # U/M 34119 Kit Size Quantity Size Quantity Size Quantity 4 x 3/8” 6 x 3/8” 80 80 6 x 5/8” 8 x 5/8” 72 60 10 x 3/4” 8 x 1” 52 40 4 x 1/2” 80 10 x 5/8” 40 10 x 1” 40 6 x 1/2” 8 x 1/2” 80 60 6 x 3/4” 8 x 3/4” 60 48 12 x 1” 10 x 1-1/4” 12 x 1-1/2” 24 20 15 Self-Drilling Phillips Flat & Pan Head Screws Assortment Kit $ Cwip # U/M 30693 Kit BEST VALUE Type/Size Quantity Type/Size Quantity Type/Size Quantity Flat 10-24 x 11⁄4” Flat 10-24 x 17⁄16” 10 10 Pan 8-18 x 1/2” Pan 8-18 x 3/4” 40 30 Pan 10-16 x 5⁄8” Pan 10-16 x 3⁄4” 30 30 Flat 12-24 x 2” 10 Pan 8-18 x 1” 30 Pan 10-16 x 1” 30 Pan 6-20 x 3/8” Pan 6-20 x 1/2” 30 30 Pan 8-18 x 11⁄2” Pan 10-16 x 1⁄2” 30 30 ECO-FRIENDLY Screws www.cwip.com HARDWARE Slotted Hex Head Type-A Sheet Metal Screw - Zinc Plated Phillips Flat Head Steel Sheet Metal Screw Zinc Plated Cwip # Size Wgt.lb. U/M 12358 6 x 1/2” .31 Box/100 11533 6 x 3/4” .34 Box/100 23646 8 x 3/4” .48 Box/100 Cwip # Size Wgt.lb. U/M 33236 8 x 1-1/4” .49 Box/100 28384 6 x 1/2” .18 Box/100 20405 10 x 1/2” .51 Box/100 28765 6 x 1” .31 Box/100 22570 12 x 5/8” .82 Box/100 29178 8 x 3/4” .34 Box/100 28383 8 x 1-1/4” .56 Box/100 28386 8 x 1-1/2” .64 Box/100 28385 10 x 1-1/4” .20 Box/100 Self-Drilling Hex Washer Head Screws Cwip # Size U/M 28382 10 x 1-1/2” .84 Box/100 38868 8 x 1/2” Box/100 29175 1.2 Box/100 Box/100 33192 10 x 2-1/2” 1.5 Box/100 Box/100 28763 12 x 1-1/2” .91 Box/10 36279 34737 8 x 3/4” 8 x 1” 10 x 2” Self-Drilling Hex Washer Head Screws Assortment Kit Cwip # U/M Size Quantity Size Quantity 30698 Kit 8-18 x 1/2” 8-18 x 3/4” 8-18 x 1” 10-16 x 1/2” 10-16 x 3/4” 30 30 30 30 40 10-16 x 1” 12-14 x 3/4” 12-14 x 1” 1/4 x 3/4” 1/4 x 1” 20 20 20 20 20 Size Thread Size 4 6 Cwip # Size U/M 14650 3/8” 14651 1/2” 14654 3/8” Bx/100 14655 1/2” Bx/100 Size U/M Bx/100 14668 3/8” Bx/100 Bx/100 14716 1/2” Bx/100 14669 5/8” Bx/100 14692 3/4” Bx/100 1” Bx/100 10 80 80 1-1/2” Bx/100 6 x 5/8” 80 8 x 5/8” 6 x 3/4” 8 x 3/4” 10 x 3/4” 6 x 1” 8 x 1” 10 x 1” 8 x 1-1/4” 10 x 1-1/4” 8 x 1-1/2” 10 x 1-1/2” 8 x 2” 10 x 2” 70 70 60 60 60 60 40 40 25 25 25 25 25 3/4” Bx/100 14694 14658 1” Bx/100 14695 14659 1-1/4” Bx/100 14696 2” Bx/100 14660 1-1/2” Bx/100 14697 1/2” Bx/100 Bx/100 14699 3/4” Bx/100 14700 1” Bx/100 14793 1/2” Bx/100 14662 5/8” Bx/100 14701 1-1/4” Bx/100 Bx/100 14702 1-1/2” Bx/100 14664 3/4” 1” Bx/100 14665 1-1/4” Bx/100 14666 1-1/2” Bx/100 14667 2” Bx/100 14 Phillips Pan Head Sheet Metal Screws Assortment Kit 1-1/4” Bx/100 14657 14663 Kit Quantity Bx/100 12 U/M 35095 Size 5/8” 3/8” Cwip # 6 x 1/2” 8 x 1/2” 14656 14693 14661 8 Cwip # Thread Size Quantity 12-14 x 3/4” 20 w/Neoprene Washer 1/4-14 x 1” 15 w/Neoprene Washer Phillips Pan Head Steel Sheet Metal Screws Zinc Plated 33300 2” Bx/50 14706 3/4” Bx/100 14707 1” Bx/100 14708 1-1/4” Bx/100 14709 1-1/2” Bx/100 357 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 358 Screws (Continued) www.cwip.com Thread Size Slotted Flat Head Steel Machine Screws Zinc Plated - Box/100 1/4-20 6-32 Cwip # Size Wgt.lb. 14325 14156 14063 23784 14197 14277 14194 1/2” 5/8” 3/4” 1” 1-1/2” 2-1/2” 3-1/2” .98 .11 .12 .15 .20 .31 .37 14280 14160 14440 14279 14032 14390 1/4” 3/8” 3/4” 1” 1-1/2” 2” .16 .19 .31 .38 .53 .68 Cwip # Size Wgt.lb. 19510 14161 14158 14030 14386 14242 14120 14436 14295 14157 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 1- 3/4” 2” 2-1/2” 3” .29 .30 .46 .58 .69 .80 .91 .10 .13 .15 10-24 14241 14389 1/2” 1” .49 .78 12-24 14123 14028 1/2” 3/4” .69 .89 Thread Size 8-32 Round Phillips Machine Screw Assortment Kit Round Head Slotted Steel Machine Screws Zinc Plated - Box/100 Thread Size 6/32 8/32 Cwip # Size 11880 1/4” 11263 5/16” Thread Size 10/32 Cwip # Size 11281 1/2” 11283 3/4” 11523 3/8” 11284 1” 12346 1/2” 11287 1-1/2” 11991 5/8” 11289 2” 11638 3/4” 11518 1/2” 11986 3/4” 11265 1” 12109 1-1/2” 11879 12/24 11633 1” 2” 11764 1-1/4” 11637 1/4” 11875 2” 11267 5/16” 11874 1/2” 12600 3/8” 12339 3/4” 12477 1/2” 11984 1” 12108 5/8” 11196 1-1/4” 11760 3/4” 11632 1-1/2” 11878 1” 12479 2” 12344 1-1/4” 11989 1-1/2” 11988 1/2” 11636 1-3/4” 11766 3/4” 12107 2” 1/4-20 10/24 Kit Quantity 6/32 1/2” 3/4” 40 40 1” 40 1/2” 3/4” 1” 1-1/2” 1/2” 3/4” 1” 1-1/2” 1/2” 3/4” 1” 1-1/2” 2” 40 40 35 30 35 30 30 20 15 15 15 10 10 8/32 10/24 1/4-20 Phillips Teks Pan Head Screws Self-Drilling Zinc Plated Cwip # Size Wgt.lb. U/M 6-20 x 3/8” .31 Box/100 12605 1” 11877 1-1/2” 22946 8-18 x 1/2” .34 Box/100 1- 3/4” 22949 8-18 x 5/8” .48 Box/100 2” 22947 8-18 x 3/4” .51 Box/100 3” 32314 8-18 x 1” .55 Box/100 26943 8-18 x 1 /2” .82 Box/100 12342 11765 BEST VALUE U/M 34131 Size 14250 11519 $ Cwip # Thread ECO-FRIENDLY 1 Screws & Bolts www.cwip.com Concrete Screws Designed to meet the needs of most light to medium duty applications in concrete, block and brick. Size Cwip # Size Phillips Flat Head 30717 3/16” x 1-1/4” 30733 34181 30742 3/16” x 1-3/4” 3/16” x 2-1/4” 1/4” x 1-1/4” 34214 1/4” x 2-1/4” 34041 34174 30718 34189 3/16” x 1-3/4” 3/16” x 2-1/4” 3/16” x 2-3/4” 1/4” x 2-3/4” 30730 1/4” x 3-1/4” 30738 1/4” x 3-1/4” 34200 1/4” x 4” Lag Screw Hex Head Zinc Plated Thread 1/2 3/8 Cwip # Size U/M 11492 11961 1-1/2” 2” Bx/50 Bx/50 11607 2-1/2” Bx/50 Thread Size 5/16 Cwip # Size U/M 12091 1-1/2” Bx/100 11735 2” Bx/100 31138 2-1/2” Bx/50 31141 3” Bx/25 11732 3-1/2” Bx/25 11139 1” Bx/100 11153 6” Bx/25 11737 1-1/4” Bx/100 12448 1-1/2” Bx/100 12207 1-1/2” Bx/100 33809 2” Bx/50 12312 2” Bx/100 12204 2-1/2” Bx/50 11959 2-1/2” Bx/100 11851 3” Bx/50 34156 3-1/2” Bx/50 31099 4” Bx/25 1/4 Hex Cap Screws Zinc Plated Coarse Thread Thread Size 1/4-20 5/16-18 3/8-16 Cwip # Size U/M Cwip # Size U/M 11499 12318 1/2” 1” Bx/100 Bx/100 16752 16645 1-1/2” 2” Bx/100 Bx/100 11965 1-1/4” Bx/100 16572 2-1/2” Bx/100 11613 1-1/2” Bx/100 16476 3” Bx/100 12093 2” Bx/100 16477 3-1/4” Bx/100 12579 11083 12524 3” 5/8” 1” Bx/100 Bx/100 Bx/100 30494 4” Bx/50 33761 4-1/2” Bx/50 11859 1-1/2” Bx/100 30712 5” Bx/50 12316 2” Bx/100 33906 6” Bx/50 12578 3-1/2” Bx/50 11091 7/8” Bx/100 16526 16755 3/4” 3” Bx/100 Bx/50 12096 1-1/2” Bx/100 16694 4” Bx/50 16575 4-1/2” Bx/50 30485 3” Bx/50 16600 4” Bx/50 16693 1-1/2” Bx/50 11150 3” Bx/25 30354 6” Bx/25 33954 2” 11495 1/2-13 Carriage Bolt Zinc Plated Without Nut 11099 3” 2-1/4” Thread Size 1/4-20 3/8-16 Bx/50 Bx/50 5/16-18 Bx/50 1/2-13 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Cwip # Slotted Hex Head 34204 3/16” x 1-1/4” 359 HARDWARE 360 Bolts, Nuts & Washers www.cwip.com Flat Steel Washers Zinc Plated Steel Hex Nut Zinc Plated Cwip # Size Wgt.lb. U/M 16916 6/32 .21 Bx/100 21157 8/32 .28 Bx/100 11321 10/24 .33 Bx/100 11778 10/32 .33 Bx/100 11314 12/24 .56 Bx/100 21060 1/4-20 1.2 Bx/100 21061 5/16-18 1.7 Bx/100 21062 3/8-16 3.1 Bx/100 21087 1/2-13 3.3 Bx/50 Lock Washers Zinc Plated Cwip # Size Approx.# per lb. U/M 33289 3/16 331 Bx/1 lb. 17078 3/16 1786 Bx/5 lbs. 33288 1/4” 129 Bx/1 lb. 20445 1/8” 1260 Bx/1 lb. 25095 5/32” 1420 Bx/1 lb. 33286 5/16” 97 Bx/1 lb. 33909 3/8” - Bx/5 lbs. 12140 1/2” 26 Bx/1 lb. Cwip # Size U/M 15235 #8 Bx/100 15199 #10 Bx/100 15268 1/4” Bx/100 15249 5/16” Bx/100 15184 3/8” Bx/100 16920 1/2” Bx/100 Fender Washer Zinc Plated Size Wgt.lb. U/M 11830 1/4 x 1-1/2” 3.2 Bx/100 18237 5/16 x 1-1/2” 1.2 Bx/100 11838 3/8 x 1-1/2” 2.2 Bx/100 11479 1/2 x 1-1/2” 2.5 Bx/100 Cwip # Malleable Iron Wing Nut Nickel Plated Cwip # Size U/M 14584 10/24 Bx/100 14593 5/16-18 Bx/100 Assortment Kits Hex Nut Assortment Kit Cwip # U/M 30680 Kit Size Quantity Size Quantity 1/4-20 5/16-18 30 20 9/16-12 5/8-11 6 6 3/8-16 20 3/4-10 5 7/16-14 1/2-13 10 10 7/8-9 1-8 3 3 Size Quantity Size Quantity 1/8 x 3/4” 5 ⁄32 x 7⁄8” 40 40 1/4 x 11⁄2” 5 ⁄16 x 11⁄4” 24 20 ⁄16 x 1” 48 ⁄16 x 11⁄2” ⁄16 x 11⁄4” 1/4 x 1” 1/4 x 11⁄4” 40 48 30 ⁄16 x 15⁄8” 3/8 x 11⁄4” 3/8 x 11⁄2” Cwip # U/M 30678 Kit 3 3 5 5 U/M 30682 Kit Sample photo Stainless Steel Washer Assortment Kit Size Fender Washer Assortment Kit Cwip # Quantity Flat Washers #4 #6 50 50 24 #8 24 24 24 #10 1/4” 5/16” 3/8” 1/2” Size #4 #6 50 50 50 #8 50 50 25 15 15 8 #10 1/4” 5/16” 3/8” 1/2” 50 25 15 15 8 Stainless Stop, Wing Nut & Acorn Nut Assortment Kit Cwip # U/M 34114 Kit $ BEST VALUE Type/Size Quantity Type/Size Quantity Type/Size Quantity Stop 6-32 Stop 8-32 15 15 Stop 3/8-16 Stop 1/2-13 8 3 Wing 6-32 Wing 8-32 8 6 Stop 10-24 15 Acorn 10-24 8 Wing 10-24 6 Stop 1/4-20 Stop 5/16-18 15 10 Acorn 1/4-20 Acorn 3/8-16 6 3 Wing 1/4-20 Wing 5/16-18 Wing 3/8-16 5 4 3 ECO-FRIENDLY Quantity Split Lock Drive Pins & Rivets www.cwip.com HARDWARE Hammer Drive Pins All-purpose lightweight nail drive fastener for direct fastening. Type Sex Bolt Cwip # Size 17701 1/4” x 3/4” Max. work concrete 1/4” Bx/100 17686 1/4” x 1” Max. work concrete 1/2” Bx/100 Block thickness 1/16” U/M For use with panic exit devices and other surface mounted hardware. Cwip # Size U/M 12624 1/4-20 x 13/4” Each Hammer Drive Pin Hammer Drive Anchors .300 head, .144 shank diameter. Zinc plated steel. Hammer Drive Tool Cwip # Size Wgt.lb. U/M Cwip # Size Wgt.lb. U/M 38982 1-1/2” 2.1 Bx/100 33455 1/4” x 1-1/4” 3.0 Bx/100 33456 1/4” x 1-1/2” 3.5 Bx/100 33454 1/4” x 2” 4.0 Bx/100 Sets drive pin with several sharp hammer blows. Cwip # Wgt.lb. U/M 17689 1.5 Each Right Angle Rivet Tool Sets 1/8, 5/32 and 3/16 aluminum and steel rivets. Spring loaded handle ejects rivet stem automatically. Slim nose design fits in tight to reach places. Comfortable, non-slip grip. Open End Aluminum Pop Rivets Cwip # Rivet Dia. Type Wgt.lb. U/M .17 Box/100 Medium .17 Box/100 Long .20 Box/100 3/16” Short .20 Box/50 18289 3/16” Medium .20 Box/50 18268 3/16” Long .25 Box/50 16559 1/8” Short 12066 1/8” 16561 1/8” 18307 1/8” Short .31 Box/100 11949 1/8” Medium .37 Box/100 11592 1/8” Long .46 Box/100 .22 Caliber Power Driver Fastening Tool • Fastens 1/2" To 3" power fasteners • Trigger activated Cwip # U/M 35777 Each Cwip # Wgt.lb. U/M 28767 .80 Each Aluminum Pop Rivet Back-up Plates Open End Steel Pop Rivets 20774 361 Cwip # Size U/M 15263 For 1/8” pop rivets Card/30 15226 For 3/16” pop rivets Card/30 Low Velocity Power Loads • Necked down and crimped • Green loads are for concrete and steel • Yellow loads are for fastening extra hard concrete and steel Cwip # Caliber Color U/M 38869 38990 .22 .22 Yellow Green Pkg/100 Pkg/100 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Anchors www.cwip.com HARDWARE 362 Zip-it® Self-Drilling Anchor Self-Drilling One Piece Anchor For use in 3/8” to 1” wallboard For mounting to 3/8”, 1/2” and 5/8” gypsum wallboard. Cwip # Type U/M 27234 Nylon Zip-It Jr. (no screws) Bx/100 27592 With #8 x 1” Screw Bx/100 Type Wgt.lb. 36175 #8-L - Zinc .70 Box/50 31278 #6 - Plastic (light duty) .22 Box/100 Cwip # Hollow Wall Anchor Hollow Wall Drive Anchor Size U/M Wall Thick. Wgt.lb. U/M Cwip # Size Wall Thick. Wgt.lb. 23080 1/8” Extra Short 1/8” 1/4” 1.0 Box/100 31585 3/16” Short 1/8”- 5/8” 1.0 Box/50 20984 1/8” Short 3/8” 1/2” 1.5 Box/100 31583 1/8” Short 1/8”- 1/2” 1.5 Box/100 11744 1/8” Long 5/8” 1-1/8” 2.0 Box/100 31584 1/8” Long 5/8”- 7/8” 2.0 Box/100 Cwip # U/M Lead Screw Anchor Plastic Anchor Screw anchor for wood, sheet metal or lag screws Lightweight anchor for wood and sheet metal screws Cwip # Size Drill Dia. Wgt.lb. U/M 14754 6-8 x 3/4” 3/16” .10 Box/100 14686 8-10 x 7/8” 3/16” .15 Box/100 14687 10-12 x 1” 1/4” .30 Box/100 5/16” .30 Box/50 14767 14-16 x 1-1/2” Cwip # Size Drill Dia. Wgt.lb. U/M 14681 6- 8 x 3/4” 1/4” 1. 3 Box/100 14682 6- 8 x 1” 1/4” 1. 5 Box/100 14683 6-8 x 1-1/2” 1/4” 2.0 Box/100 14752 10-14 x 1” 5/16” 2.0 Box/100 5/16” 3.0 Box/100 14684 10-14 x 1-1/2” Plastic Screw/Anchor Kits • (100) 10-12 plastic anchors • (100) No. 10 x 1” panhead sheet metal screws • (1) 1/4” rotary carbide drill bit Lag-Shield Rustproof, precision-cast durable zinc alloy Cwip # Size Len. Drill Dia. Wgt.lb. U/M 31590 1/4” Long 1-1/2” 1/2” 2.0 Bx/50 31591 5/16” Short 1-1/4” 1/2” 1.5 Bx/50 31592 5/16” Long 1- 3/4” 1/2” 2.1 Bx/50 31593 3/8” Short 1- 3/4” 5/8” 3.8 Bx/50 31594 3/8” Long 2-1/2” 5/8” 4.8 Bx/50 $ BEST VALUE ECO-FRIENDLY Cwip # Wgt.lb. U/M 14679 .95 Box • (100) 10-12 plastic anchors • (100) No. 12 x 1” panhead sheet metal screws • (1) 1/4” rotary carbide drill bit 14680 1.2 Box Toggle Bolts www.cwip.com HARDWARE Round Head Toggle Bolts Cwip # Size Drill Dia. Wgt.lb. U/M 14562 1/8 x 2” 3/ 8” .63 Box/50 14530 1/8 x 3” 3/8” .75 Box/50 14532 1/8 x 4” 3/8” 1.0 Box/50 14574 3/16 x 2” 1/2” 1.6 Box/50 14534 3/16 x 3” 1/2” 2.0 Box/50 14536 3/16 x 4” 1/2” 2.5 Box/50 18276 3/16 x 5” 1/2” 2.8 Box/50 14573 1/4 x 3” 5/8” 3.3 Box/50 18555 1/4 x 4” 5/8” 3.8 Box/50 14545 5/16 x 3” 5/8” 3.3 Box/25 14546 3/8 x 4” 7/8” 4.5 Box/25 Flat Head Toggle Bolt Toggle Wing Size Drill Dia. Wgt.lb. U/M 17859 1/4 x 3” 5/8” 3.3 Box/50 Cwip # Size Wgt.lb. U/M 39580 1/8” 1.8 Box/100 18287 3/16” 2.0 Box/100 21010 1/8 x 2” 3/8” .63 Box/50 Box/50 14531 1/8 x 3” 3/8” .75 Box/50 39588 1/4” 2.3 Mushroom Head Toggle Bolt Corner Brace Zinc Plated Mending Plate Zinc Plated Cwip # Cwip # Size - Len. Wgt.lb. 363 Flat Corner Iron Zinc Plated U/M Cwip # Size - Len. Wgt.lb. U/M Cwip # Size - Len. Wgt.lb. U/M 1” 1.1 Box/48 12532 1-1/2” .96 Box/48 12274 2-1/2” 1.9 Box/48 11918 13883 3” 1.9 Box/48 16010 1-1/2” 1.4 Box/48 12163 2” .96 Box/48 13822 4” 3.8 Box/48 15941 2” 2.6 Box/45 11805 2-1/2” 1.5 Box/48 13708 6” .22 Each 11677 3-1/2” 4.5 Box/24 37317 3” 2.0 Box/24 15906 4” 5.8 Box/10 11917 4” 2.9 Box/24 12036 6” 6.3 Box/12 20074 8” 4.9 Box/6 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 364 Hooks, Sash Chain & Galvanized Wire www.cwip.com Push Points Zinc Plated Approx: 50 push points per card. Pegboard Hook Assortment Open Style S-Hook Zinc Plated Cwip # Trade Size U/M Cwip # Trade Size U/M 14985 3” Bx/50 31435 3” Cd/15 Sash Chain With Fixtures U/M 23810 Bag/100’ U/M 14735 Card Solid Weaving Galvanized Wire •Working load limit: 75 lbs. • Coppered steel Cwip # Cwip # Cwip # Size U/M 14131 20 Gauge Roll/100’ Continued » Mailboxes 1250 Series Auth Vertical Mailboxes Anodized Aluminum Finish • Door Size: 16”H x 51⁄2”W • Compartment Size: 161⁄2”H x 5”W x 6”D • Wallcut Depth: 63⁄4” • Wallcut Hgt.: 173⁄4” • Overall Hgt.: 191⁄8” USPS approved; fully recess mount. Cwip # Type Wallcut Width O.A. Width U/M 26067 4 Gang 23” 241⁄2” Each 26517 5 Gang 285⁄8” 301⁄8” Each 25971 6 Gang 34 ⁄8” 355⁄8” Each 37269 7 Gang 395⁄8” 411⁄8” Each 1 Hudson Cam Lock With 2 keys; used on AF horizontal/vertical mailboxes 2/19/07 and after); (Used with Model: 1250). Accessories For 1250A Cwip # Type Mfg. # U/M Cwip # Mfg.# U/M 36791 4-Gang Surface Collar SMS125-4 Each 34065 K30809 Each 36792 5-Gang Surface Collar SMS125-5 Each A Letter Box Plate Covered Back Plate B C Opening: 11” x 2”. Cwip # Mfg. # Finish O.A. Size U/M 28326 621 Aluminum 13” x 39⁄16” Each 10” x 3” Mail Slots Sleeve for 621 Slot Stainless steel; 1-3/4”D. Cwip # 39379 $ U/M Each BEST VALUE ECO-FRIENDLY Cwip # Type U/M A 34605 Brass; Spring Action; 73/4” x 15/8” Opening Each B 36759 Solid Brass; Outside & Inside Flap Each C 33692 Brass Finish; With Flap and Back Plate Each Mailboxes www.cwip.com B Black Vertical Mailboxes Cwip # H x W x D Description U/M Black Baked Enamel Finish With Hooks C A 36012 11” x 63⁄4” x 37⁄8” B 36463 103⁄4” x 9” x 41⁄8” C Each With lock and 2 keys. Each Heavy-Duty Plastic Body 38678 121⁄2”H x 6”W Hasp eye for padlocks (not included) Each Black Horizontal Mailboxes A B Cwip # A 19892 B L x W x D Description U/M Black Baked Enamel Finish - Galvanized Steel Piano hinge; retractable hooks. 143⁄4” x 7” x 23⁄8” Each Heavy-Duty Plastic Black Body 36503 12”L x 77⁄8”H Hasp eye for padlocks (not included) Each Large Capacity White Mailbox • Heavy-duty steel construction • Brass plated lid handle • Powder paint finish Cwip # 38909 Size U/M 14”W x 9”H x 5”D Each Continued » Mailbox Locks Import Mailbox Lock Dull Chrome Mailbox Lock With Keys With 5 cams and 2 keys Cwip # Mfg.# Keying U/M 17411 1600 KD Bx/10 Fits Auth, United, Florence boxes. For doors up to 1/4”, rear mounting. With 2 steel keys, nickel plated. 22932 1650 KD Bx/10 Fits Cole, Amalgamated, Columbia letter box locks. Application for doors up to 1/4”, rear mounting. Cwip # Key Blank U/M 19584 11770 Each $ Pin Tumbler Mailbox Locks • Meets USPS spec. L-1172C • Fits new standard 4C boxes Includes: mounting clip; hex nut; (3) keys. Cwip # Mfg.# Opens U/M 38967 C-9100 90° c Each 38975 C-9200 90° c/cw Each 38991 D4300 Standard Keyblank Box/50 38983 D4301 Reverse Keyblank Box/50 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE A 365 Mailbox Locks (Continued) HARDWARE 366 www.cwip.com Mailbox Lock Brass Plated With 2 Keys Mailbox Lock 3-Tumbler lock with 2 keys.Steel bolt and case, and brass tumblers. Cwip # U/M Cwip # Keying U/M 15259 Each 15191 KD Box/12 33/16” Mailbox Sub Plate For Flat Key Locks Cwip # U/M 14814 Each Mailbox Sub Plate 41/4” Cwip # U/M 30601 Each Multi-Cam™ Pin Tumbler Mailbox Lock - C-8735 Cwip # Opens Key Blank U/M 30108 90° cw 32622 Each Multi-Cam™ Pin Tumbler Mailbox Lock - C-8730 Cwip # Opens Key Blank U/M 24380 90° c/cw 32622 Each Hudson Pin Tumbler Mailbox Lock • Key removable locked positions only • With camnut and two brass keys Cwip # Opens Key Blank U/M 19579 90° c/cw 11770 Each C-8710 Replaces Bommer Cwip # Locked Cam Position Direction to Open U/M 26087 Left 90° c/cw Each C-8712 Replaces Bommer Cwip # Locked Cam Position Direction to Open U/M 15162 Down 90° c/cw Each C-8713 Replaces Auth Electric* Cwip # Locked Cam Position Direction to Open U/M 82267 Left 90° c/cw Each *Also replaces Bommer lock B25-300 used on Bommer box #9015 (Sleeve inside box must be removed). $ BEST VALUE ECO-FRIENDLY Mailbox Locks www.cwip.com Cwip # Locked Cam Position Direction to Open U/M 21205 Left 90° c/cw Each C-8715 Replaces Florence Mfg. Cwip # Locked Cam Position Direction to Open U/M 23744 Up 90° cw Each C-8716 Replaces S.H. Couch Cwip # Locked Cam Position Direction to Open U/M 23610 Up 90° cw Each C-8718 Replaces Cutler Mail Chute Cwip # Locked Cam Position Direction to Open U/M 22773 Left 90° c/cw Each C-8719 Replaces Miami Carey Cwip # Locked Cam Position Direction to Open U/M 37055 Up 90° c/cw Each C-8720 Replaces Dura Steel Cwip # Locked Cam Position Direction to Open U/M 24559 Down 90° cw Each C-8724 Replaces Bommer Cwip # Locked Cam Position Direction to Open U/M 23174 Left 90° c/cw Each C-8725 Replaces Cutler Federal Cwip # Locked Cam Position Direction to Open U/M 28455 Left 90° c/cw Each Use Cwip # 32622, Key Blank for Mailbox Locks Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE C-8714 Replaces American Device 367 HARDWARE 368 Schlage Locksets www.cwip.com Rekeying Locks with • High security cylinder • Rekey lock without removing from door • Save on rekey pinning costs Step 1: Put Lock in Rekey Mode Insert current blue reset key and turn from 12:00 to 11:00. Remove the key. Step 2: Rekey Lock Insert new blue reset key* and turn from 11:00 to 12:00. Remove the key. *Cut new key to match the new home owner key. Step 3: Begin Using the Everyday Brass Key. F51 Entry Locksets Cwip # 38385 38396 36282 Orbit® Plymouth® 36286 Style Plymouth Orbit Satin Chrome Each Bright Brass Each Satin Chrome Each Satin Nickel LH Each 38404 Satin Nickel RH Each Pol. Chrome LH Each Pol. Chrome RH Each Accent 36306 36254 36265 36321 Georgian® U/M Each 36291 36298 Accent® Finish Bright Brass 36333 Bell Georgian Bright Brass Each Satin Chrome Each Satin Nickel Each Antique Brass Each F80 Storeroom Locksets 36361 38508 Plymouth 38417 36309 Orbit 36401 Bell® B560 Bright Brass Each Satin Chrome Each Bright Brass Each Satin Chrome Each Satin Nickel Each Single Cylinder Deadbolts Cwip # B562 Style Finish U/M Antique Brass Each Polished Chrome Each Satin Chrome Each 36564 Bright Brass Each 38548 Bright Brass/Satin Chrome Each Satin Nickel Each 36423 36524 36529 36545 B360 B560 B360 Double Cylinder Deadbolts 38704 36571 38708 B562 Bright Brass Each Satin Chrome Each Antique Brass Each More finishes and knob/lever sizes available…contact your sales representative! $ BEST VALUE ECO-FRIENDLY Schlage Locksets www.cwip.com HARDWARE Entry Locksets - F51 Adjustable backsets; C-keyway; 5-pin cylinder; outside rose chassis; universal latch unit, 1/2” throw; full lip strike. (Cannot be keyed to 6-pin.) Key Blank 12120 Cwip # 19903 Bell® 23658 39636 25392 24595 22923 Plymouth® Plymouth Orbit Bell Finish U/M Bright Brass Each Satin Chrome Each Bright Brass Each Satin Chrome Each Bright Brass Each Satin Chrome Each 37856 Georgian Satin Nickel Each 37207 Flair Satin Nickel 38485 38499 Orbit® Style Accent Each Satin Nickel LH Each Satin Nickel RH Each Replacement Latches - Square Corner Includes A501-878 latch front adapter for 1-1/8” faceplate Cwip # Finish Backset Size U/M 32564 Bright Brass Adjustable 1” x 2-1/4” Each Satin Chrome Adjustable 1” x 2-1/4” Each 32851 ® Georgian Accent® Entry Locksets C-keyway; 5-pin cylinder; 1/2” throw NOTE: Cannot be keyed to 6-pin. Cwip # Finish Backset Key Blank U/M S51PD Saturn Design - 5-Pin Cylinder Saturn® 30657 Bright Brass Adjustable 12120 Each 35373 Satin Chrome Adjustable 12120 Each AL53PD Saturn Design - 6-Pin Cylinder 31465 Satin Chrome Adjustable - Each Replacement Latch - Square Corner Includes A501-878 latch front adapter for 1-1/8” faceplate Cwip # 32851 Finish Backset Satin Chrome Adjustable Size U/M 1” x 2-1/4” Each 369 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Schlage Locksets (Continued) www.cwip.com HARDWARE 370 A53PD Entry Locksets Threaded outside rose chassis; reversible latch unit, 1/2” throw; strike & strike box; solid brass 6-pin cylinder, keyed 5-pin with 2 nickel keys. Cwip # Finish Backset Keyway Key Blank U/M 23/8” C 12120 Each 23/4” C 12120 Each 16211 23/8” C 12120 Each 19423 3 2 /4” C 12120 Each 23/8” E 12608 Each 23/4” E 12608 Each 23/8” E 12608 Each 23/4” C 12120 Each 23/8” C 12120 Each Plymouth Design 19941 Tulip® Plymouth® 21141 Replacement Latches Cwip # 18361 18386 13586 81460 Finish Bright Brass Satin Chrome 22217 Bright Brass Satin Chrome 19045 Backset Size U/M 2-3/8” 1” x 2-1/4” Each Tulip Design 2-3/4” 1” x 2-1/4” Each 30880 2-3/8” 1” x 2-1/4” Each 37944 2-3/4” 1” x 2-1/4” Each 38839 Cwip # Satin Chrome Style Finish U/M F40 Privacy Locksets 23954 ® Plymouth Bright Brass Each 23955 Satin Chrome Each 35540 Bright Brass Each 39644 Satin Chrome Each 33556 Satin Nickel Each Bright Brass Each Satin Chrome Each 36934 Plymouth Orbit Elan 35490 Orbit® 36949 Accent Satin Nickel Each 37223 Flair Satin Nickel Each 36760 Georgian Satin Nickel Each F10 Passage Locksets 23956 Plymouth® Elan® Bright Brass Each 23957 Satin Chrome Each 35334 Bright Brass Each 37726 Satin Chrome Each 33555 Satin Nickel Each Bright Brass Each Satin Chrome Each 39652 Plymouth Orbit Elan 35482 Accent® 37709 Accent Satin Nickel Each 37231 Flair Satin Nickel Each 36768 Georgian Satin Nickel Each Flair® Dummy Knobs Georgian® $ BEST VALUE Cwip # Style 36951 37191 37199 36965 36957 Georgian Flair (LH) Flair (RH) Accent (LH) Accent (RH) ECO-FRIENDLY Finish Satin Satin Satin Satin Satin Nickel Nickel Nickel Nickel Nickel U/M Each Each Each Each Each Schlage Locksets www.cwip.com HARDWARE Storeroom Locksets Solid brass 6-pin cylinder, keyed 5-pin with 2 nickel keys; reversible latch unit, 1/2” throw; strike & strike box; adj. threaded outside rose chassis. Plymouth® Cwip # Finish Backset Keyway Key Blank U/M A80PD Plymouth Design • Grade 2 22836 25008 29704 Replacement Latches 18361 18386 13586 81460 Finish Bright Brass Satin Chrome Bright Brass 23/4” C 12120 Each 23/4” E 12608 Each 2 /4” C 12120 Each 3 F80 Orbit Design • Grade 2 Orbit® Cwip # Satin Chrome 35572 Satin Chrome Adj. C 12120 Each 39660 Bright Brass Adj. C 12120 Each F80 Plymouth Design • Grade 2 Backset Size U/M 2-3/8” 1” x 2-1/4” Each 2-3/4” 1” x 2-1/4” 2-3/8” 1” x 2-1/4” 2-3/4” 1” x 2-1/4” 32431 Satin Chrome Adj. C 12120 Each Each 29443 Bright Brass Adj. C 12120 Each Each S80PD Saturn Design Each 35876 23⁄8” C 12120 Each Satin Chrome Single Cylinder Deadbolts B560 2-3/8 2-3/4” Adjustable backset; C-keyway; solid brass 6-pin cylinder, keyed 5-pin with 2 nickel keys; 1” bolt throw; 1” x 2-1/4” faceplate. B562 Cwip # Finish Backset Key Blank U/M B560 Deadbolts B360 37412 Satin Chrome Adj. 12120 Each 37420 Bright Brass Adj. 12120 Each 39664 Antique Brass Adj. 12120 Each Adj. 12120 Each Adj. 12120 Each 37599 Bright Brass/Satin Chrome B360 Deadbolt 37215 Satin Nickel Double Cylinder Deadbolts B562 Deadbolts Replacement Latch 37404 Satin Chrome Adj. 12120 Each Cwip # Finish Backset Size U/M 37396 Bright Brass Adj. 12120 Each 37428 Bright Brass Adj. 1” x 2-1/4” Each 39679 Antique Brass Adj. 12120 Each B250PD Nightlatch L9453 Mortise Entry Lockset C-keyway; 9/16” bolt throw. Deadlocking latchbolt retracted by key from outside or by inside turn unit. Rotating turn unit and activating hold-back feature keeps latch retracted. Solid brass 6-pin cylinder; 1” throw deadbolt, 3/4” latchbolt; armor front w/steel case: 47/16” x 61/16” x 1”; reversible auxiliary guard latch. Cwip # 22745 Finish Bright Brass Backset Key Blank 2-3/8” 12120 U/M Each Cwip # Finish 30382 Satin Chrome Backset 2-3/4” Keyway Key Blank C 371 12120 U/M Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Schlage Locksets (Continued) www.cwip.com HARDWARE 372 H153 Entry Locksets Solid brass 5-pin cylinder; housing and linkage; self-adjusting reversible faceplate; strike & strike box; threaded outside rose chassis. Cwip # Finish Backset Keyway Key Blank U/M 23/4” E 12608 Each 23/4” E 12608 Each 23/8” C 12120 Each 23/4” C 12120 Each Orbit Design 28187 Bright Brass 25064 Satin Chrome 24899 Plymouth Design 32971 ® Orbit Satin Chrome Replacement Latches Cwip # Finish 37428 18386 ® Plymouth Backset Size U/M Top - Adj. 1” x 2-1/4” Each Bottom - 2-3/4” 1” x 2-1/4” Each 18361 Bottom - 2-3/8” 1” x 2-1/4” Each 34286 Top - Adj. 1” x 2-1/4” Each Bottom - 2-3/4” 1” x 2-1/4” Each Bottom - 2-3/8” 1” x 2-1/4” Each Bright Brass 81460 Satin Chrome 13586 S251PD Entry Lockset with Deadbolt • Double locking • Non-handed Saturn® • 1” throw deadbolt • 6-pin C keyway, keyed 5-pin, keyed alike Cwip # Finish Backset Keyway U/M 36630 Satin Chrome 23/4” C Each H110 Deadbolt w/Bottom Passage Lockset • Single locking • Non-handed Levon® • 1” throw deadbolt • 1” x 2-1/4” faceplate Cwip # Finish Backset Keyway Key Blank U/M 36451 Satin Bronze 23/4” C 12120 Each 39667 Satin Chrome 23/4” E - Each Entry Locksets GLA53PD Single Cylinder Deadbolts GLD160 • Steel cylindrical housing • C-keyway • 6-pin cylinder, keyed 6-pin Sunset Cwip # 36781 36789 36773 36765 Finish Backset Key Blank Bright Brass Satin Chrome Cwip # Finish U/M 36749 Bright Brass Adj. 12120 Each 36757 Satin Chrome Adj. 12120 Each 2-3/8” 12120 Each 2-3/4” 12120 Each 2-3/8” 12120 Each 2-3/4” 12120 Each 2-3/4” - Each 2-3/8” - Each 2-3/4” - Each Replacement Latches - GLA Series 36821 36805 36813 Bright Brass Satin Chrome $ BEST VALUE ECO-FRIENDLY • C-keyway; keyed different • 6-pin cylinder, keyed 6-pin Backset Key Blank U/M Kwikset Locksets www.cwip.com SmartKey enables a quick and easy re-key without having to remove the lock from the door. HARDWARE Abbey 780 Cove Stainless steel locking bar, racks & pins • Increases job production • Control jobsite keys • Simple on-site re-keying Easily rekeyed in seconds Cwip # Style 660 Polo Tylo Type Finish U/M Satin Chrome Set Bright Brass Set 30486 Antique Brass Set 34365 Bright Brass Set Satin Chrome Set Bright Brass Set Satin Chrome Set Antique Brass Set Satin Nickel Set Satin Chrome Each Bright Brass Each Bright Brass Each Satin Chrome Each Satin Nickel Each Antique Brass Each Combo Entry/Deadbolts 30487 Bump guard Re-Key in 3 Steps 30489 1 Insert functioning key and turn 1/4 turn clockwise. 2 34392 Abbey Cove 35642 Tylo 35641 35668 3 Insert new key and turn 1/2 turn counter-clockwise. Your lock is now re-keyed. Polo 35673 740 & 780 400 & 660 400 & 660 400 & 660 Entry Locksets 30505 Insert and remove the SmartKey learn tool. Remove functioning key. 30497 Abbey 740 30889 30883 30852 Cove 400 30893 30863 Venetian Bronze Each 35692 Key Control™ Deadbolt with Key Control Cylinder (property manager) Technology Enables a quick and easy re-key without having to remove the lock from the door. User Cylinder (Tenant) • One-key control • Increased efficiency 35684 Bright Brass Each Each 35785 Satin Nickel Each 35793 Satin Chrome Each Bright Brass Each Antique Brass Each 35734 Finish Polo 400 35739 Venetian Bronze Each Deadbolts 30510 Cwip # Each Antique Brass 400 35740 Cylinder cap removed to show both cylinders Satin Chrome 35676 Tylo 1 Insert the SmartKey tool into the slot 30507 at bottom of cylinder cover 2 Rotate cover clockwise to access the Key Control cylinder. 3 Use tool to rotate counter-clockwise back to user’s keyway when appropriate 34385 U/M Abbey 780 30878 - 660 Satin Chrome Each Bright Brass Each Bright Brass Each Each Bright Brass Round face latch Each 34378 Satin Chrome Each 34389 Antique Brass Each 816 Key Control Deadbolts 37903 Satin Chrome Each 35899 Bright Brass Each Reset Cradle 35881 Antique Brass Each 37818 Venetian Bronze Each 37867 Satin Nickel Each Repair a SmartKey cylinder that has been programmed incorrectly. Cwip # U/M 30496 Each SmartKey™ Rekeying Tools Cwip # Type U/M 30492 Plastic - Red Each 30500 Metal Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 373 Kwikset Locksets (Continued) HARDWARE 374 www.cwip.com 400T Entry Locksets 400T 5-Pin tumbler cylinder; 1/2” throw Tylo® Cwip # 31303 37713 300T Finish Polished Brass Backset Key Blank U/M Adjustable 12935 Each Less Latch/Strike 12935 Each 39724 Satin Chrome Adjustable 12935 Each 39408 Antique Brass Adjustable 12935 Each Standard Cylinder - 1850 Bright Brass Cwip # 14986 300T Privacy Locksets 200T Turn-button interior; plain exterior; 3/8” throw; adjustable backsets Cwip # Type U/M 16204 Square Corner Face Plate Each 33088 Less Latch/Strike Each 28816 Finish Less Latch only Each 25939 Round Face Latch/Strike Each 39699 Round Corner Front Latch Each 16203 Square Corner Face Plate Each 25961 33789 Polished Brass Satin Chrome Antique Brass Round Face Latch Each Radius Corner Face Plate Each - Each Round Face Latch Each Split Finishes 400/300/200/100T Replacement Latches 16162 35723 Must order both the deadlatch and service kit for the complete latchset. Bright Brass/ Bright Chrome 200T Passage Locksets Plain knob both sides; 3/8” throw; adjustable backsets Dead Latch Service Kit Finish Backset Size 35759 35751 Satin Chrome Adj. 1” x 21⁄4” 16240 35759 35743 Polished Brass Adj. 1” x 21⁄4” 33246 35759 38559 Antique Brass Adj. 1” x 21⁄4” Cwip # 39691 Finish Polished Brass Type U/M Square Corner Face Plate Each Round Face Latch Each Round Corner Latch Each 33089 Less Latch & Strike Each 16239 Square Corner Face Plate Each Round Face Latch Each Square Corner Latch Each 25958 36382 Satin Chrome Antique Brass 400T & 660 Combination Entry Locksets 400T • 660 single cylinder deadlock with 1” deadbolt • Key-in-knob entry lockset • KA in pairs, with 4 keys 660 Cwip # 24226 33777 Finish Type U/M For 660 Deadbolts - Adjustable 36526 Polished Brass 36509 Antique Brass 36502 Satin Nickel 35909 Polished Chrome $ Each Square Corner Face Plate Each Each Each BEST VALUE Polished Brass Backset Key Blank U/M Adjustable 12935 Set (Less Latch) 12935 Set 19985 Satin Chrome Adjustable 12935 Set 30214 Antique Brass Adjustable 12935 Set 100T Exit Locksets Replacement Latches Cwip # Finish ECO-FRIENDLY 32473 Polished Brass Adjustable 12935 Each 32489 Satin Chrome Adjustable 12935 Each 38526 Antique Brass Adjustable 12935 Each Kwikset Locksets www.cwip.com HARDWARE 405DL Lever Entry Locksets • 5-pin tumbler cylinder • Non-handed • Square corner face plate Delta® 405 660 Must order both the deadlatch and service kit for the complete latchset. Dead Latch Service Kit Finish Backset Size 35759 35751 Satin Chrome Adj. 1” x 21⁄4” 35759 35743 Polished Brass Adj. 1” x 21⁄4” 36616 38559 Antique Brass Finish Backset U/M 36758 Polished Brass Adjustable Each 39627 Satin Chrome Adjustable Each 38545 Antique Brass Adjustable Each 462DL Vestibule Locksets 36481 Polished Brass Adjustable Each 37616 Satin Chrome Adjustable Each 38601 Antique Brass Adjustable Each 405DL & 660 Combination Entry/Deadbolt Locksets 405DL Replacement Latches 35759 Cwip # Adj. 1” x 21⁄4” Deadlatch 6-Way Collar Cwip # Finish Backset U/M 38602 Bright Brass Adjustable Set 36484 Satin Chrome Adjustable Set 38674 Antique Brass Adjustable Set Replacement Latches Cwip # Finish Type U/M For 660 Deadbolts - Adjustable 36526 Polished Brass 36509 Antique Brass 35909 Satin Chrome Each Square Corner Face Plate Each Each 300DL Privacy Locksets Turn-button interior; plain exterior; 3/8” throw; adjustable backsets Cwip # Finish 38547 Polished Brass 38556 Satin Chrome 38504 Antique Brass 38531 Polished Chrome Type U/M Each Square Corner Face Plate Each Each Each Split Finishes 38539 Polished Brass/Polished Chrome Each 200DL Passage Locksets Plain knob both sides; 3/8” throw; adjustable backsets 300/200DL Replacement Latches Must order both the deadlatch and service kit for the complete latchset. Plain Latch Service Kit Finish Backset Size 36751 36743 Chrome Adj. 1” x 21⁄4” 36751 36735 Polished Brass Adj. 1” x 21⁄4” 36751 36419 Antique Brass Adj. 1” x 21⁄4” 36751 36604 Satin Nickel Adj. 1” x 21⁄4” 36624 Cwip # Finish 38555 Polished Brass 38667 Satin Chrome 36376 Antique Brass Type U/M Each Square Corner Face Plate 375 Each Each Plain latch 6-Way Collar Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Kwikset Locksets (Continued) HARDWARE 376 www.cwip.com 400P Entry Locksets Polo® Square corner face plate Cwip # Finish Backset Key Blank U/M 36402 Polished Brass Adjustable 12935 Each 38534 Satin Chrome Adjustable 12935 Each 36398 Antique Brass Adjustable 12935 Each 36388 Satin Nickel Adjustable 12935 Each 450P Vestibule Locksets 400P Replacement Latches Dead Latch Service Kit Finish 35759 35751 Satin Chrome Adj. 1” x 21⁄4” 35759 35743 Bright Brass Adj. 1” x 21⁄4” 35759 38559 Antique Brass Adj. 1” x 21⁄4” 35759 38754 Satin Nickel Adj. 1” x 21⁄4” 36616 Bright Brass Adjustable 12935 Each 34386 Satin Chrome Adjustable 12935 Each 36428 Antique Brass Adjustable 12935 Each 400P & 660 Combination Entry/Deadbolt Locksets Must order both the deadlatch and service kit for the complete latchset. Backset 38554 Size Cwip # Finish Backset Key Blank U/M 38569 Polished Brass Adjustable 12935 Set 36426 Satin Chrome Adjustable 12935 Set 38589 Antique Brass Adjustable 12935 Set 36200 Satin Nickel Adjustable 12935 Set Replacement Latches Deadlatch 6-Way Collar Cwip # Finish Type U/M For 660 Deadbolts - Adjustable 36526 Polished Brass 36509 Antique Brass 36502 Satin Nickel 35909 Polished Chrome Each Square Corner Face Plate Each Each Each 300P Privacy Locksets Reversible latch; 1/2” throw; adjustable backsets Cwip # Finish 39055 Bright Brass Type 34834 Satin Chrome 36418 Antique Brass 36192 Satin Nickel U/M Each Square Corner Face Plate Each Each Each Split Finishes 30346 Brt. Brass/Pol. Chrome Each 200P Passage Locksets Reversible latch; 1/2” throw; adjustable backsets 300/200P Replacement Latches Must order both the deadlatch and service kit for the complete latchset. Cwip # Finish 38171 Bright Brass Type 34876 Satin Chrome 38585 Antique Brass 37883 Satin Nickel U/M Each Square Corner Face Plate Service Kit Finish Backset Size 36751 36743 Chrome Adj. 1” x 21⁄4” Cwip # Finish U/M 36751 36735 Polished Brass Adj. 1” x 21⁄4” 36410 Bright Brass Each 36751 36419 Antique Brass Adj. 1” x 21⁄4” 34916 Satin Chrome Each 36751 36604 Satin Nickel Adj. 1” x 21⁄4” 36378 Antique Brass Each 36385 Satin Nickel Each Plain latch 6-Way Collar $ BEST VALUE ECO-FRIENDLY Each Each Plain Latch 36624 Each 488P Dummy Knobs Kwikset Locksets www.cwip.com HARDWARE 740LL Entry Locksets • Round corner face plate • Adjustable backset • Fully reversible lever ® Lido Cwip # Finish Key Blank U/M 38586 Polished Brass 12935 Each 38587 Satin Chrome 12935 Each 36473 Antique Brass 12935 Each 36459 Satin Nickel 12935 Each 740LL & 660 Combination Entry/Deadbolt Locksets Square Corner Face Plate 740LL Replacement Latches Must order both the deadlatch and service kit for the complete latchset. 38700 Polished Brass 12935 Set Dead Latch Service Kit Finish Backset Size 38620 Satin Chrome 12935 Set 35759 35751 Satin Chrome Adj. 1” x 21⁄4” 38603 Antique Brass 12935 Set 35759 35743 Polished Brass Adj. 1” x 2 ⁄4” 36515 Satin Nickel 12935 Set 35759 38559 Antique Brass Adj. 1” x 21⁄4” 35759 38754 Satin Nickel Adj. 1” x 21⁄4” 36616 1 Deadlatch 6-Way Collar Replacement Latches Cwip # Finish Type U/M For 660 Deadbolts - Adjustable 36526 Polished Brass 36509 Antique Brass 35909 Satin Chrome 36502 Satin Nickel Each Square Corner Face Plate Each Each Each 720LL Passage Locksets • Adjustable backset • Fully reversible lever Cwip # Finish 34152 Polished Brass 36408 Satin Chrome 36470 Antique Brass 38595 Satin Nickel Type U/M Each Round Corner Face Plate Each Each Each 730LL Privacy Locksets • Adjustable backset 720/730LL Replacement Latches Must order both the deadlatch and service kit for the complete latchset. Plain Latch Service Kit Finish 36751 36743 Satin Chrome Adj. 1” x 21⁄4” 36751 36735 Polished Brass Adj. 1” x 21⁄4” 36751 36419 Antique Brass Adj. 1” x 21⁄4” 36604 Satin Nickel Adj. 1” x 21⁄4” 36751 36624 Backset Size Cwip # Finish 34151 Polished Brass 36655 Satin Chrome 36427 Antique Brass 38583 Satin Nickel 37051 37059 Hand 377 Type U/M Each Each Reversible Round Corner Face Plate Polished Brass/ Right Satin Chrome Left Plain latch 6-Way Collar Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Each Each Each Each HARDWARE 378 Kwikset Locksets & Deadbolts www.cwip.com 740A Entry Locksets 740A • 6-Pin removable core cylinder • 2-1/4” Full lip square strike Abbey® Cwip # Finish Backset Key Blank U/M 34242 Bright Brass Adjustable 31317 Each 32818 Satin Chrome Adjustable 31317 Each 36377 Antique Brass Adjustable 31317 Each 750A Vestibule Locksets 740A 780 34135 Bright Brass Adjustable 31317 Each 33564 Satin Chrome Adjustable 31317 Each 38507 Antique Brass Adjustable 31317 Each 740A & 780 Combination Entry/Deadbolt Locksets Keyed alike in pairs with 4 keys 740/750A Replacement Latches Cwip # Finish Backset Key Blank U/M 33958 Bright Brass Adjustable 31317 Set 39748 Satin Chrome Adjustable 31317 Set 36853 Antique Brass Adjustable 31317 Set Replacement Latches Must order both the deadlatch and service kit for the complete latchset. Cwip # Finish Type Dead Latch Service Kit Finish Backset Size 35759 35751 Satin Chrome Adj. 1” x 21⁄4” 36486 Bright Brass 35759 35743 Bright Brass Adj. 1” x 21⁄4” 38610 Antique Brass 35759 38559 Antique Brass Adj. 1” x 21⁄4” 36617 Satin Nickel 38619 Satin Chrome 36616 U/M For 780 Deadbolts - Adjustable Deadlatch 6-Way Collar Each Square Corner Face Plate Each Each Each Deadbolts 5-Pin tumbler cylinder. Cwip # Mfg. # 39604 39628 35844 Bright Brass 660 39620 Polished Brass 660 Single Cylinder 38457 39612 36476 36489 Satin Chrome 665 Polished Chrome 663 Finish 665 Double Cylinder 38591 Backset Key Blank U/M Adjustable 12935 Each Adj., Round Face 12935 Each Satin Chrome Adjustable 12935 Each Antique Brass Adjustable 12935 Each Satin Nickel Adjustable 12935 Each Polished Brass Adjustable 12935 Each Satin Chrome Adjustable 12935 Each Antique Brass Adjustable 12935 Each Satin Nickel Adjustable 12935 Each One Sided Deadbolt Thumbturn on one side; no trim on other side. 37685 39384 663 Polished Brass 2-3/8” - Each Satin Chrome 2-3/8” - Each Replacement Latches Cylinder For 660 Polished Brass Cwip # 38078 $ BEST VALUE ECO-FRIENDLY Cwip # Finish 36526 Polished Brass 36509 Antique Brass 35909 Satin Chrome 36502 Satin Nickel Type U/M Each Square Corner Face Plate Each Each Each Kwikset Deadbolts, Cylinders & Trim Kits www.cwip.com HARDWARE 780 Single Cylinder Deadbolt 6-pin removable core cylinder Replacement Latches Cwip # Finish 36486 Bright Brass Type 38610 Antique Brass 36617 Satin Nickel 38619 Satin Chrome U/M Each Each Square Corner Face Plate Cwip # Finish Backset Key Blank U/M 34190 Polished Brass Adjustable 31317 Each 33565 Satin Chrome Adjustable 31317 Each 38654 Antique Brass Adjustable 31317 Each 34814 Satin Nickel Adjustable 31317 Each Each Each 780 Complete Replacement Cylinder 740A Entry Lockset Replacement Cylinder Cwip # Finish Key Blank U/M 32598 Polished Brass 31317 Each 34572 Satin Chrome 31317 Each 39002 Antique Brass 31317 Each Kwikset Modernization Kit #214 Cwip # Finish Size U/M 32424 Pol. Brass 3.5” x 10.5” Kit A Finish U/M Satin Chrome Each 38524 Antique Brass Each B U/M Polished Brass Each 36485 Satin Chrome Each 38617 Antique Brass Each 38660 Satin Nickel Each Cwip # Size U/M 33512 2-1/4" x 7-1/8" Pair Bit Key Mortise Lock • 3-1/2”W x 8-1/2”L • Center-to-center spacing: 3-5/8” 38516 Finish 32599 For interior bit key mortise locks. Satin brass plated steel. Kwikset Trim Kit #262 Cwip # Cwip # Ilco Trim Plate For 2-1/8” bore hole. Replaces old mortise locksets. Includes: (2) trim plates, latch, strike plate. Includes: mortise lock, knob, spindle, face plate, strike, and 2 keys. Cwip # Finish U/M 28912 Bright Brass Each C Round Knobsets Kwikset Trim Rosettes Tylo Dummy Knobs For 2-1/8” bore hole (less locksets). Cwip # Mfg. # Finish Backset Size U/M Rectangular Rosettes 16840 288 Polished Brass Adj. 37⁄8” x 41⁄8” Each B 20450 249 Polished Brass 2-3/8” 71⁄4” x 33⁄8” Each C Round Rosettes A 16841 293 Polished Brass Adj. 313⁄16” Each 32992 293 Satin Chrome Adj. 313⁄16” Each Cwip # Size U/M 24347 Bright Brass Each 35700 Satin Chrome Each • 21⁄4” knob w/spindle and screws • Heavy gauge solid brass • Fits most doors and locks Cwip # Finish U/M 16606 Polished Brass Set/2 36693 379 Satin Chrome Screw Pack •For all Kwikset knobs • 8/32 (2) each • Wood screw (4) each Cwip # 31393 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Set/2 Economy Locksets www.cwip.com HARDWARE 380 Guard® Locksets Latchbolt is interchangeable with Kwikset privacy locks. Cwip # Finish Backset U/M Bright Brass 2-3/8” Each 2-3/8” Each Privacy Lock 36569 Passage Lock 36577 Cwip # Finish Handed Bright Brass U/M Cwip # Passage Leversets 39919 39927 Satin Nickel RH Each 30112 LH Each Privacy Leverset RH Each LH Each 33373 Privacy Leversets 39959 39935 Satin Nickel Finish Handed U/M Rev. Each Rev. Each Passage Leverset Cwip # Satin Nickel Satin Nickel Finish Backset U/M 2-3/8” Each Adj. Each Privacy Locksets A A 33543 36064 B A B Polished Brass 37485 Dull Chrome 2-3/8” Each 36056 Stainless Steel Adj. Each 34862 Satin Nickel Adj. Each 2-3/8” Each Adj. Each Passage Locksets Cwip # A Finish Backset Keyblank A U/M Entry Locksets 5-Pin Tumbler Cylinder 33541 36016 36048 Polished Brass Adj. 12935 Each 36032 Antique Brass Adj. 12935 Each 36040 Stainless Steel Adj. 12935 Each B Polished Brass 37557 Dull Chrome 2-3/8” Each 36072 Stainless Steel Adj. Each 31256 Satin Nickel Adj. Each Combination Entry Lockset & Single Cylinder Deadbolt Economy Deadbolt 5-pin tumbler cylinder Cwip # Finish Backset U/M 37008 Polished Brass Adjustable Set Deadbolts Economy Deadbolts Cwip # Cwip # 37565 - Pr. Replacement Latch Cwip # Finish Backset U/M 37874 Pol. Brass Adjustable Each $ BEST VALUE Finish Single Cylinder 33538 Polished Brass 36024 Dummy Knob Dull Chrome ECO-FRIENDLY Backset Adj. Cylinder Keyblank U/M KD 12935 Each KD (Box) 12935 Each 36080 Stainless Steel Adj. K3 12935 Each 36088 Antique Brass Adj. K3 12935 Each Adj. KD 12935 Each Double Cylinder 36144 Stainless Steel Economy Locksets & Deadbolts www.cwip.com HARDWARE Light Commercial Ball Locksets • 6-pin solid brass cylinder • Removable cylinder for rekeying Cwip # Finish Backset Keyblank U/M Adj. Adj. 19377 19377 Each Each Adj. Adj. 19377 19377 Each Each Adj. Adj. - Each Each Adj. Adj. - Each Each Entry Locks 34094 Stainless Steel 30697 Polished Brass Storeroom Locks 34132 Stainless Steel 30694 Polished Brass Privacy Locks 34143 Stainless Steel 34121 Polished Brass Passage Locks 34100 Stainless Steel 30673 Polished Brass Heavy Duty Commercial Deadbolts • 6-pin solid brass cylinder • Removable cylinder for rekeying Cwip # Economy Finish Backset Keyblank Grade U/M Single Cylinder Deadbolts 34095 Stainless Steel Adj. 19377 2 Each 30687 Polished Brass Adj. 19377 2 Each Economy Ball Locksets • 5-pin high security cylinder • Removable cylinder for rekeying Cwip # Finish Backset Keyblank U/M Adj. - Each Adj. - Each Privacy Lock 33922 Satin Nickel Passage Locks 33925 Satin Nickel 381 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Weiser Lock Locksets www.cwip.com HARDWARE 382 Entrance/Office Door Lock - A530B 5-pin tumbler cylinder Finish Backset Key Blank Wgt.lb. U/M 21642 Bright Brass Adjustable 12944 1.3 Each 15974 Satin Chrome 12944 1.3 Each Cwip # Adjustable Storeroom/Exit Door Lock - A580B 19305 Bright Brass Adjustable 12944 1.3 Each 22824 Satin Chrome Adjustable 12944 1.3 Each Beverly® Replacement Latch Cwip # Finish Backset Wgt.lb. U/M 21996 Satin Chrome Adj. .20 Each Combination Entrance Lockset Single Cylinder Deadbolt - A530B & D9470X Keyed alike in pairs; with 4 keys Cwip # Finish Backset Key Blank Wgt.lb. U/M 19672 Satin Chrome Adj. 12944 2.4 Each Replacement Latches Cwip # Top Bottom Finish Backset Wgt.lb. U/M Adj. .40 Each 31140 21996 Satin Chrome Privacy Lockset - A330B 5-pin cylinder Cwip # Finish Backset Wgt.lb. U/M 24473 Satin Chrome Adjustable 1.1 Each Passage Lockset - A100B Beverly® 21904 Satin Chrome Adjustable 1.0 Each 28461 Bright Brass Adjustable 1.0 Each Single Cylinder Deadbolts - D9470X 5-pin cylinder Cwip # Finish Backset Key Blank Wgt.lb. U/M 13772 Satin Chrome Adjustable 12944 1.0 Each 26268 Bright Brass Adjustable 12944 1.0 Each 1.2 Each Double Cylinder Deadbolt • D9370S 5-pin cylinder 13313 Bright Brass 2-3/8” 12944 Replacement Latch $ BEST VALUE ECO-FRIENDLY Cwip # Finish Backset Wgt.lb. U/M 31140 Satin Chrome Adjustable .20 Each Locksets www.cwip.com HARDWARE Entry Lockset Interchangeable Core Less Core - F521E Less core Cwip # Finish Backset Wgt.lb. U/M 38294 Bright Brass 2-3/4” 1.4 Each 38302 Satin Chrome 2-3/4” 1.4 Each Combination Entry Lockset Single Cylinder Deadbolt - F521E & D841 Keyed alike in pairs; with 4 keys Cwip # Finish Backset Key Blank Wgt.lb. U/M 2-3/4” 22222 2.4 Each 38422 Satin Chrome Single Cylinder Deadbolt - D841 6-Pin solid brass cylinder. Cwip # Finish Backset Key Blank U/M 22850 Satin Chrome 2-3/4” 22222 Each Cylinder Deadbolt - D841X4 Interchangeable Core Less Core Cwip # Finish Backset Wgt.lb. U/M 25055 Bright Brass 2-3/4” 1.1 Each Mortise Locksets - M Series Reversible; 5-Pin, E keyway; HN style knob. Type Backset Key Blank Wgt.lb. U/M 31330 Satin Chrome LH 2-3/4” 22222 1.0 Each 31329 Satin Chrome RH 2-3/4” 22222 1.0 Each Cwip # Finish Cylindrical Entry Lockset - 110 Series Cwip # Finish Backset Wgt.lb. U/M 38388 Satin Stainless Steel 2-3/8” 2.5 Each Classic Lockset - Heavy Duty Series Latch by knob either side except outside knob locked by stop button in front or projected deadbolt. Deadbolt and latch by key outside. Deadbolt by turnpiece inside. Inside knob retracts latch and deadbolt simultaneously. Exterior plate: 7.5” x 2.25”; interior plate: 7.5” x 2.25” with turnpiece; solid brass 5-pin cylinder(s); rev. mortise lock. Cwip # Mfg.# 24310 7CL10F 24309 7CL10F 33560 7CL10A 33601 7CL10A Finish Polished Brass 383 Handing Backset Key Blank U/M Left 23/4” 11643 Each Right 23/4” 11643 Each Left 23/4” 11643 Each Right 23/4” 11643 Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Marks Locksets (Continued) www.cwip.com HARDWARE 384 New Yorker Entrance Lockset 9NY10A Series Latch by knob either side except outside knob locked by stop-button in front; then by key outside, knob inside. Deadbolt by key outside, turnpiece inside; exterior plate: 10” x 2-3/4”; interior plate: 7” x 2.25” with turnpiece; solid brass 5-pin cylinder; rev. mortise lock. Finish Type Backset 24470 Pol Brass Left Hand 2-1/2” 11643 4.7 Each 24469 Pol. Brass Right Hand 2-1/2” 11643 4.7 Each Cwip # U/M Key Blank Wgt.lb. Concorde Entrance Knob/Rose Mortise Lockset - 9RW20A Series Latch by knob either side except outside knob locked by stop-button in front; then by key outside, knob inside. Deadbolt by key outside, turnpiece inside; front: 1-1/16” x 7-5/8” solid brass; interior rose w/snap-on cover; solid brass 5-pin cylinder. Cwip # Finish Type Backset Key Blank U/M 23766 23765 Polished Brass Left Hand Right Hand 2-1/2” 11643 Each 38086 Stainless Steel Right Hand 2-1/2” 11643 Each 39431 Left Hand Heavy-Duty Lever Lockset 7CL92A Series Mortise Lock Bodies 9A Series For knobs and levers. • Bolt throw: 1” • Latch throw: 1/2” • Exterior plate: 8” x 2-1/2” • Solid brass 6-pin cylinder Cwip # Finish Handing Backset Key Blank U/M Cwip # Finish Handing Backset Wgt.lb. U/M 39723 Satin Chr. Left 2-3/4” 11643 Each 34185 Satin Steel Right 2-1/2” 2.5 Each 39715 Satin Chr. Right 2-3/4” 11643 Each 34187 Satin Steel Left 2-1/2” 2.5 Each Arrow Locksets Continued » Storeroom Lockset MK12TA Tudor Cylindrical Locksets MK11TA Tudor Drilled 6-pin, keyed 5-pin. Tudor Cwip # 31167 Finish Bright Brass 37281 Satin Chrome 29147 Bright Brass 27743 Satin Chrome Ball Drilled 6-pin, keyed 5-pin. Backset Key Blank U/M Cwip # Finish Backset Keyblank U/M 22792 Satin chr. 2-3/4” 11885 Each 2- 3/8” 11885 Each 2- 3/8” 11885 Each 2- 3/4” 11885 Each 2-3/4” 11885 Each Less Cylinder - MK11TA Tudor 32573 Satin Chrome 2-3/8” (N/A) Each Cylindrical Locksets - MK11BD Ball 31133 Bright Brass 39313 Satin Chrome $ BEST VALUE ECO-FRIENDLY 2-3/8” 11885 Each 2-3/4” 11885 Each Replacement Latches Cwip # Mfg. # Backset U/M 38273 111 (Flat) Satin S.S. 2-3/8” Each 35787 114 (Flat) Satin S.S. 2-3/4” Each Finish Arrow Locksets (Continued) www.cwip.com HARDWARE Arrow Mortise Lockset AM11HTG - Knob Style BD • 2-piece stainless steel latchbolt 5/8” x 1” x 3/4” throw • 1-piece stainless steel deadbolt 19/32” x 1-1/4” x 1” Cwip # Finish Backset Key Blank Wgt.lb. U/M 2- 3/4” 11885 5.5 Each 37597 - RH Satin Chr. TG Mortise Locksets - AM11BD Knob 37605 - RH 37613 - LH Satin Chrome 2- 3/4” 11885 5.5 Each 2- 3/4” 11885 5.5 Each 5.5 Each Mortise Locksets - BM11XH Lever XH 39635 - RH Satin Chr. 2- 3/4” 11885 Arrow Single Cylinder Deadbolt E61 Thumbturn Two 1/4” steel thru-bolts; drilled 6-pin, keyed 5-pin; 1” deadbolt; with two keys Backset Keyblank Wgt.lb. U/M Bright Brass 2-3/8” 11885 1.3 Each Satin Chr. 2- 3/4” 11885 1.3 Each Cwip # Finish 33434 33429 Lever Mortise Entry Locksets ML2048C (Old Style) Latchbolt by key outside or by grip either side, unless outside grip is locked by toggle-action stop. Deadbolt by key outside or by thumbturn lever inside. Brass 6-pin cylinder; 2-piece brass latchbolt 5/8” x 1” x 3/4” throw; 1-piece stainless steel deadbolt; 9/32” x 1-1/4” x 1”. Cwip # Type Finish Backset Key Blank Wgt.lb. U/M 39739 LH Satin Chr. 2- 3/4” 20933 5.5 Each 39747 RH Satin Chr. 2-3/4” 20933 5.5 Each Mortise Entry Locksets ML2048G (Old Style) Brass 6-pin cylinder; 2-piece brass latchbolt 5/8” x 1” x 3/4” throw; 1-piece stainless steel deadbolt; 19/32” x 1-1/4” x 1”. Cwip # Type Finish Backset Key Blank Wgt.lb. U/M 26030 LH Satin Chr. 2- 3/4” 20933 5.3 Each 26032 RH Satin Chr. 2-3/4” 20933 5.3 Each Mortise Apartment Locksets ML2067 (New Style) Brass, 6-pin cylinder; 2-piece brass latchbolt 5/8” x 1” x 3/4” throw; 1-piece stainless steel deadbolt, 19/32” x 1-1/4” x 1”. Finish Backset Key Blank Wgt.lb. U/M 22917 LH Satin Chr. 2- 3/4” 20933 5.3 Each 22918 RH Satin Chr. 2-3/4” 20933 5.3 Each Cwip # Type 385 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Deadlocks For Glass Doors HARDWARE 386 www.cwip.com A E B Right-hand C F Left-hand D Adams Rite Thumbturn Handle - 4565 Series Adams Rite Deadlatch Lock Model DL-4510 Less cylinder; reversible; latchbolt: 1/2” throw; strike included. A Cwip # Type Finish Backset Wgt.lb. U/M 37466 LH Satin Chrome 1- 1/8” 2.2 Each 37458 RH Satin Chrome 1-1/8” 2.2 Each C Cwip # B Type Wgt.lb. U/M 37450 LH Satin Aluminum 1.5 Each 37434 RH Satin Aluminum 1.5 Each 37442 LH Duronodic - Bronze 1.5 Each 37474 RH Duronodic - Bronze 1.5 Each U/M 36833 Satin Chrome 1.2 Each Cwip # Type Finish Wgt.lb. U/M 36810 Rev. Aluminum 1.0 Each 37274 Rev. Bronze 1.0 Each Adams Rite Deadlatch - 4510 Series E Cwip # Type Finish Backsets U/M 36546 RH Dark Bronze 31/32” Each 36841 LH Satin Aluminum 31/32” Each Adams Rite Electric Strike For 4500/4700/4900 Series Deadlatches Adams Rite Paddle Handle - 4590 Reversible; push-plate; with cam plug B Wgt.lb. With cam plug. D Finish Finish Lever Handles - 4560 Paddle Handles Push and pull plates; cam plug; reversible Cwip # Cwip # Type Finish Wgt.lb. U/M 36802 Push to left Satin Aluminum 1.5 Each 36554 Push to left Dark Bronze 1.5 Each Remote electrical control for above series. Unlocks strike jaw, releasing latchbolt allowing door to be opened without operating the latch itself. Fits into aluminum jamb (or opposing door) sections as shallow as 1-5/8”. F Cwip # Mfg. # Finish Volts U/M 38533 7100 Satin Aluminum 24 Each Exit Door Bars Surface Mount Exit Bar Reversible Wide head, designed for hollow metal or flush wood doors with a thickness of 1-1/2” to 2”. Includes a 5-pin cylinder: SC1 keyway. Cwip # Finish Size U/M 39900 Aluminum Adj. 29” 42” Each $ BEST VALUE ECO-FRIENDLY Panic Rim Exit Device Surface mount, single point latching. Heavy-duty steel chassis and pushpad; stainless steel springs; nylon bearings. Non-handed, for 1-3/4” door thickness. Cwip # Finish Size U/M 25913 Alum. 36” bar fits 31” 36” door Each Latches www.cwip.com B C A Finish Backset Faceplate 18361 Bright Brass 13586 Satin Chrome 18386 Bright Brass 1” x 21⁄4” 30794 Satin Chrome 3-3/4” 35681 Satin Chrome 1/2” Throw; 2-1/4” x 1” faceplate. Mfg.# U/M 11-085 Each 11-085 Each 1” x 21⁄4” 11-091 Each 11⁄8” x 21⁄4” 11-103 Each 21⁄4” x 1” C Each 11-091 5” Finish Backset Mfg.# Wgt.lb. U/M 32564 Bright Brass Adj. 16-207 .18 Each 32851 Satin Chrome Adj. 16-207 .18 Each 27655 Satin Chrome 5” 16-126 .18 Each Cwip # 1” x 21⁄4” 2-3/4” 81460 Satin Chrome B 1” x 21⁄4” 2-3/8” D Schlage F-Series Deadlatches Schlage Standard A-Series Deadlatches Cwip # HARDWARE A 41-005 Backset extension link 11-085 Each w/41-005 Standard B-Series Deadbolts D Cwip # Finish 37428 Bright Brass Backset Faceplate 34286 Satin Chrome Mfg.# U/M Adj. 1” x 21⁄4” 12-274 Each Adj. 1” x 21⁄4” 12-274 Each 6-Way Core Deadlatch Sets For Entry Function A Must order both deadlatch and collar/plates for a set. A Cwip # Description Backset Mfg.# U/M 35759 Deadlatch Adjustable 81846 Each 6-Way Collar & Face Plate Kits B B Mfg.# U/M 36616 81828 Each Finish Mfg.# U/M 35751 Chrome & Satin Chrome 81844 Each 35743 Bright Brass 81844 Each 38559 Antique Brass 81844 Each 38754 Satin Nickel 81844 Each Must order both deadlatch and collar/plate for a set. 6-Way Deadlatch Collar Cwip # Cwip # 6-Way Core Deadlatch Sets For Entry Function C C Cwip # Description Backset Mfg.# U/M 35759 Deadlatch Adjustable 81846 Each Springlatch Sets For Passage & Privacy Functions A Must order both springlatch and collar/plates for a set. A Cwip # Description Backset Mfg.# U/M 36751 Springlatch Adjustable 81847 Each 6-Way Collar & Face Plate Kits B B 6-Way Plain Latch Collar Cwip # Mfg.# U/M 36624 81829 Each Cwip # Finish Mfg.# U/M 36743 Satin Chrome 81845 Each 36735 Bright Brass 81845 Each 36419 Antique Brass 81845 Each 36604 Satin Nickel 81845 Each Springlatch Sets For Passage & Privacy Functions C Must order both springlatch and collar for a set. C 387 Cwip # Description Backset Mfg.# U/M 36751 Springlatch Adjustable 81847 Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Latches & Surface Bolts www.cwip.com HARDWARE 388 B A Round Face Deadbolt Latch Cwip # Finish Backset Wgt.lb. Mfg.# Standard & 5” Deadbolt Latches Cwip # U/M 23927 Bright Brass 2-3/8” 2734 .18 Each 25597 Bright Brass 2-3/4” 2735 .18 Each A 23645 12847 38697 37010 B 23054 Finish Mfg.# U/M 2-3/8” 2728 Each 2-3/4” 2729 Each 2-3/8” 2728 Each 2-3/4” 2729 Each 5” 3014 Each Bright Brass Satin Chrome Bright Brass Global Deadlatches GLA Series Arrow MK-Series Deadlatches Can also be used as a replacement for Schlage locks. Cwip # Backset Finish Backset U/M 36821 Bright Brass 2-3/4” Each 36805 Satin Chrome 2-3/8” Each 36813 Satin Chrome 2-3/4” Each Cwip # Mfg. # Finish U/M B.S. 38273 111 (Flat) Satin S.S. 2-3/8” Each 35787 114 (Flat) Satin S.S. 2-3/4” Each Import Deadlatch With a stainless steel finish, this deadlatch can be used on other leading USA brands of cylindrical locksets, including Schlage, Arrow, etc. Cwip # Backset Wgt.lb. U/M 30145 2-3/8” .14 Each A Springlatch Cwip # • Interlocking construction • Heavy-gauge track and rod • With universal and mortise strikes Cwip # Length Throw Wgt.lb. U/M 14495 3” 11/16” .19 Each 14488 4” 15/16” .24 Each 15918 6” 15/16” .35 Each BEST VALUE Finish Deadlatch Backset Mfg.# U/M A52460 Each A 22552 Satin Chrome Adjustable B 21996 Satin Chrome Adjustable A52460D Each Solid Brass Ball Catch Solid Brass Surface Bolt $ B ECO-FRIENDLY Free rolling ball insures smooth, positive and trouble-free action. Adjustable, threaded barrel. Cwip # Face Plate Wgt.lb. U/M 15412 1-1/2” x 3/4” .18 Each 15678 2-1/8” x 1” .19 Each Strikes, Knobsets & Cylinders www.cwip.com Cwip # Finish Size U/M 23979 Bright Brass 23/4” x 1” Each 39957 Satin Chrome 2 /4” x 1” Cwip # U/M 15032 Each Each 3 HARDWARE Nickel Plated Strike Plate “T” Strike Plates 1/4” Radius Strike Plate 19301 Bright Brass 21/4” x 13/16” Each Brass Plated Strike Plate 30186 Satin Chrome 21/4” x 13/16” Each Round Strike Plate 14984 Bright Brass 1 /4” 3 Cwip # U/M 22125 Each Each Round Knobsets Split Spindle • 2-1/4” Knob w/spindle and screws • Heavy gauge solid brass • Fits most doors and locks Cwip # Finish U/M 16606 Polished Brass Set/2 36693 Satin Chrome • Universal • Threaded with holes both sides • 3/8” removable centers Set/2 Cwip # Length U/M 22211 6” Each 35445 4-3/4” Each Cylinders Solid Brass Mortise Cylinders Cwip # Size Mfg. # Finish Keying Keyway Key Blank Cam U/M 38491 15/16” 7155-YA12 Bright Brass KD Yale 999 20834 CLV Each 30399 7165-KS Bright Brass KD KS 12935 CLV Each 36730 7165-SC2 Satin Chrome KD SC2 12120 AR Each 7165-YA2 Duracolor KD Yale 999 20834 AR Each 36322 7165-FA2 Duracolor Brown Alum. KA2 Segal 9 (1022) 11643 AR Each 36675 7185-SE15 Satin Chrome KD Schlage E 12608 29769 7185-SX1 Satin Chrome KD Schlage C-K 12120 STD Each 35539 7185-SX1 Bright Brass KD Schlage C-K 12120 STD Each 28377 7185-SC1 Satin Chrome KD SC1 12120 STD Each 33550 7185-SC1 Bright Brass KD SC1 12120 STD Each 7185-UA1 Bright Brass KD IN3 20973 STD Each 31350 7185-KW1 Satin Chrome KD KW1 12935 STD Each 30148 7185-KS1 Bright Brass KD KS1 12935 STD Each 37717 7185-LA17 Satin Chrome KD LA17 12486 S/E Each 39800 7185-WA19 Bright Brass KD WA19 12944 CLV Each 39743 7185-WA19 Satin Chrome KD WA19 12944 CLV Each 36330 7205-RB1 Bright Brass KD Russwin D1 22861 STD Each 7205-SC1 Bright Brass KD SC1 12120 STD Each 7205-YA1 Satin Brass KD Y1 20834 STD Each 32523 30011 37018 1” 1-1/8” 1-1/4” 21465 SCH-L Each Key-in-Knob Cylinder With 2 Keys For use with Schlage A-Series or Arrow M-Series Cwip # Mfg. # Finish Type Keyway Key Blank U/M 32395 15395YA Satin Chrome 5-Pin KD Yale 999 20834 Each 32572 15395SX Satin Chrome 5-Pin KD Schlage C-K 12120 Each 33281 15395KS Satin Chrome 5-Pin KD Kwikset 12935 Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 389 Cylinders (Continued) www.cwip.com HARDWARE 390 Ilco® Zinc Diecast Rim Cylinders 2 Keys furnished screws, backplates and ring included Cwip # Mfg. # Finish Keying Keyway Key Blank U/M 35837 605 Satin Brass KD KW1* 12935 Each *Will also accept: KW1, AR1, WR3, WR5, IN3, SE1 Solid Brass Rim Cylinders 2 Keys furnished screws, backplates and ring included. Cwip # Mfg. # Finish Keying Keyway Key Blank U/M 30099 7015-AA8 Satin Chrome KD Arrow 11885 Each 30564 7016-AA8 Satin Chrome 6-Pin KD Arrow 11885 Each 32525 7015-KS8 Bright Brass 5-Pin KD Kwikset 12935 Each 37026 7015-KS8 Satin Chrome KD Kwikset 12935 Each 35941 7015-LA8 Bright Brass KD 1004 12486 Each 37002 7015-RB8 Bright Brass KD A57-1D 20933 Each 28771 7015-SC8 Satin Chrome 5-Pin KD Schlage C 12120 Each 23546 7015-SC8 Bright Brass 5-Pin KD SC1 12120 Each 33979 7015-SE8 Satin Chrome 5-Pin KD Schlage 19369 Each 33643 7015-SE8 Bright Brass KA2 Schlage 19369 Each 19302 7015-UA8 Bright Brass 5-Pin KD IN3 20973 Each 35357 7015-UB8 Bright Brass KD L100/EA27 11884 Each 28282 7015-YA8 Bright Brass 5-Pin KD Y-1 20834 Each 38652 7015-YA8 Satin Chrome KD Y-1 20834 Each Sargent Mortise Cylinder With rosette: #41 Cwip # Finish 24589 Satin Chrome Keying Keyway Key Blank KD RC 24687 U/M Each Kwikset Standard Cylinder For 400 Series: #1850 Schlage Mortise Cylinder Size: 1-1/8”; solid brass; #20-001E Cwip # Finish 37702 Satin Chrome Keying Keyway U/M KD E Each Cwip # Finish Key Blank U/M 14986 Bright Brass 12935 Each Falcon Mortise Cylinder Size: 1-1/4”; 6-pin; 986 standard cam Cwip # Finish 31328 Satin Chrome Keying Keyway Key Blank KD E 22222 U/M Each Replacement Core Satin Chrome Can be used with Falcon, Best and Arrow $ Solid Brass Rim Cylinders Recess Mount Cwip # Keyway Key Blank U/M 24946 A 24977 Each 25301 B 24978 Each Less core, for interchangeable core 25302 C 24979 Each 25303 D 24980 Each 25304 F 24982 Each 25305 G 24983 Each Cwip # Mfg.# Finish U/M 25306 953 Bright Brass Each BEST VALUE ECO-FRIENDLY Cylinders www.cwip.com 391 HARDWARE Brass Rim Cylinder (Restricted Keyway) Brass Mortise Cylinder (Restricted Keyway) Unique keyway and bow design helps reduce the risk of unauthorized key duplication. Can be used in almost any lockset, deadbolt, mortise lock, rim device or padlock. Unique keyway and bow design helps reduce the risk of unauthorized key duplication. Can be used in almost any lockset, deadbolt, mortise lock, rim device or padlock. Cwip # Finish Keying Keyway U/M Cwip # Finish Size Cam U/M 37050 Satin Brass KD 6-Pin CSA Each 37034 Satin Chrome 1-1/8” AR Each Cwip # Schlage 200/400 B-Series Cylinder Schlage Mortise Cylinder Solid brass with 2 keys. Solid brass with 2 keys. Finish 30502 Satin Chrome U/M Keyway Keying 6-Pin Each C Cwip # Size Finish Keying Keyway U/M 25436 1-1/8” Bright Brass 5-Pin C Each 27172 1-1/8” Satin Chrome 5-Pin C Each Schlage A-Series Lock Cylinders Schlage Rim Nightlatch Cylinder Brass, 6-pin With 2 keys Cwip # Finish Keying Keyway U/M 26505 Satin Chrome 5-Pin C Each Cwip # Finish Keying Keyway U/M 22912 Satin Brass 6-Pin (1) Bitted E Each 26506 Satin Chrome KD 5-Pin C Each 26508 Satin Chrome KD 5-Pin E Each Russwin™ Mortise Cylinder Solid Brass Segal Rim Cylinder With 2 nickel silver keys Cwip # 23870 28313 Size 1-1/8” Finish Keying Satin Chrome Keyway U/M Cwip # Finish Keying Key Blank U/M D1 Each 13098 Brass 5-Pin 11643 Each D4 Each 6-Pin Yale® Tumbler Cylinder Fits standard cylinder hole. With two keys, cylinder ring, connecting screws and backplate. Cwip # Finish Type Key Blank U/M 15012 Satin Brass KD 20834 Each Solid Brass Dummy Cylinder • 1-7/8” diameter plates inside and out • Fits all thickness doors up to 2-1/8” Cwip # Finish Wgt.lb. U/M 14940 Bright Brass .12 Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Cylinder Accessories HARDWARE 392 www.cwip.com Adjustable Spring Collar Deadbolt Cylinder Hole Cover Solid brass, adjustable between 5/16” 13/32” Covers a standard 2-1/8” diameter hole; solid steel; male and female plate with thru-bolt; fits doors from 1-3/8" to 1-3/4" thick. With screws. Cwip # Finish U/M 37497 Satin Chrome Each 33313 Bright Brass Each Metal Scar Ring Polished Brass Size U/M 23114 1-1/4” x 3-1/16” Each Finish U/M 35859 Gray Each Solid Collar Aluminum • 1-7/8” diameter plates inside and out. • Fits all thickness doors up to 2-1/8” Cwip # Cwip # Cwip # Thickness 30032 3/16” Mortise Cam Screws Self-tapping U/M Pkg/10 Cwip # Size U/M 36417 3 x 48 Bag/100 Deadlocks Flat Strike Flat Strike Y1 Keyway Ilco® Jimmyproof Locks Jimmyproof lock with bronze lacquered finish. Key outside; turn knob inside. Jimmyproof Single Cylinder Vertical Deadlock Segal Single Cylinder Slamlock • Solid bronze construction • Includes: cylinder, 2 keys, screw pack, mounting plate and instructions. Cwip # Finish Keyway U/M 38081 Brushed Brass SE-1 Each Cwip # • Solid bronze construction • Includes: lock, strike, rim cylinder, (2) keys, screw pack, cylinder trim ring and mounting plate. Cwip # 37664 Finish Strike Keyway Key Blank U/M Single Cylinder 24404 Angle KW1 12935 Each 12935 Each - Each Double Cylinder 30367 Angle KW1 Lock Less Cylinder U/M 24179 Brushed Chrome Each Flat - Single Cylinder Jimmyproof Deadlock Twin interlocking drop bolt; flat keeper 5-pin tumbler brass cylinders; brass finish. $ Cwip # Key Blank U/M 36142 12935 Each Ilco® Night Latch Less Cylinder 220-53-41 $ BEST VALUE Yale® Single Cylinder Deadlock With Flat Strike Key outside, knob inside. (2) Hardened steel interlocking bolts resist prying. For doors 1-3/8” to 3” thickness; case size: 4-3/4” wide, 3-5/22” high; high-density, rust-resistant alloy with dull bronze finish; No. 1747 cylinder with 2 keys. Cwip # Type Key Blank U/M Cwip # Finish U/M 82015 #197-F 2-3/8” Backset 20834 Each 39849 Bronze Each 15012 Cylinder Only 20834 Each ECO-FRIENDLY Deadlocks www.cwip.com Key outside, knob inside, latchbolt held retracted by key or knob. When locked, guardbolt deadlocks latchbolt automatically. For doors 1-3/8” to 2-1/4” thick, opening in; case size: 3-5/8” wide, 2-1/2” high; high-density, rust-resistant alloy with brass lacquer finish; 2-3/8” standard backset No. 1747 cylinder with 2 keys; latchbolt: 17/32” throw, brass finish. Yale® Heavy Duty Deadlock - Series 112 Key operation outside; thumbturn from inside; brass lacquer finish Cwip # Wgt.lb. U/M 31472 .85 Each Cwip # Type 13692 #80 Complete Latchlock 15012 Cylinder Only Key Blank U/M 20834 Each 20834 Each Door Lock Reinforcement Plates Units With 11/2” Bores A A B Cwip # Mfg.# / Finish Backset Door Depth Size Wgt.lb. U/M 25057 5-PB Polished Brass 2-3/8” 1-3/8” 4” x 4.5” .40 Each 25058 6-PB Polished Brass 2-3/8” 1-3/4” 4” x 4.5” .40 Each 22303 6-S Stainless Steel 2-3/8” 1-3/4” 4” x 4.5” .40 Each Size Wgt.lb. U/M Units With 21/8” Top & Bottom Bores 3-5/8” between centers Cwip # B Backset Door Depth 25345 261 Polished Brass 2-3/8” 1-3/4” 4” x 9” .76 Each 24625 481 Stainless Steel 2-3/4” 1-3/4” 4-1/4” x 9” .76 Each Units With 21/8” Bores C C Cwip # Mfg.# / Finish Backset Door Depth Size Wgt.lb. U/M 24010 51-PB Pol. Brass 2-3/8” 1-3/8” 4” x 4-1/2” .40 Each 27533 61-PB Pol. Brass 2-3/8” 1-3/4” 4” x 4-1/2” .40 Each 82324 1-PB Pol. Brass 2-3/8” 1-3/8” 4” x 9” .94 Each 82011 2-PB Pol. Brass 2-3/8” 1-3/4” 4” x 9” .94 Each 21400 1-S Stainless Steel 2- 3/8” 1- 3/8” 4” x 9” .94 Each 21380 2-S Stainless Steel 2- 3/8” 1- 3/4” 4” x 9” .94 Each 27650 81-PB Pol. Brass 2-3/4” 1-3/4” 4-1/4” x 4.5” .42 Each 24568 3-PB Pol. Brass 2-3/4” 1-3/8” 4-1/4” x 9” 1.0 Each 24569 4-PB Pol. Brass 2-3/4” 1-3/4” 4-1/4” x 9” 1.0 Each 25244 81-S Stainless Steel 2-3/4” 1-3/4” 4-1/4” x 4.5” .40 Each 21645 3-S Stainless Steel 2- 3/4” 1- 3/8” 4-1/4” x 9” 1.0 Each 21208 4-S Stainless Steel 2- 3/4” 1- 3/4” 4-1/4” x 9” 1.0 Each Door Latch Protectors • • • • Mfg.# / Finish In-swinging doors Steel construction Interlocks door & frame With hardware Cwip # Finish 39416 Bright Brass Ives® Lock Guard Satin Stainless Steel For mortise and cylindrical locks. Size U/M 12” Each Cwip # Size U/M 19583 11/2” x 91/2” Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Yale® Pin Tumbler Security Nightlatch 393 394 Keying Services www.cwip.com Custom Keying Services Need a master keying system, factory set or new/old locks rekeyed? “CALL CENTRAL” for your locks, keys and keying needs. Door Handing To determine the handing of a door and/or lockset: Stand inside the door frame with your back against the door hinge and jam: A - If the door/lockset is on your left, the door/lockset is left handed (LH). B - If the door/lockset is on your right, the door/lockset is right handed (RH). A B Interior Left Hand Door and Lockset (LH) Interior Right Hand Door and Lockset (RH) Exterior Exterior Lock Function Chart Entry Locks Exit Locks Privacy Locks Passage Locks Finishes Finish Description ANSI L03 Lifetime Polished Brass 605E US3 Polished Brass 605 US5 Antique Brass 609 US10B Oil Rubbed Bronze 613E/690 Outside knob locked by inside button. Unlocked by turning inside knob or with emergency key provided. US11P Venetian Bronze - US15 Satin Nickel 619 Both knobs are always free. US15A Antique Nickel 620 US26 Polished Chrome 625 Function Description Unlocked by key from outside when outer knob is locked by turn button in inner knob. Inner knob is always free. Both knobs locked or unlocked by turn button inside. Storeroom Locks Outer knob fixed entrance by key only. Inner knob always unlocked. US26D Satin Chrome 626 Single Cylinder Deadbolts Deadbolt thrown or retracted by key from outside or by inside turn unit. Bolt automatically deadlocks when fully thrown. US32 Bright Stainless Steel 629 US32D Satin Stainless Steel 630 Double Cylinder Deadbolts Deadbolt thrown or retracted by key from either side. $ BEST VALUE ECO-FRIENDLY Keying Services www.cwip.com and for Multi-Family Housing Management Code Keying System Our staff will generate and maintain computerized reports which will provide assurance that you receive the proper lock pinning sequences for years to come. We will evaluate your Master Key to avoid future lock and safety problems. Most existing locks can be rekeyed and converted to the code keying system. Master keys and resident keys will be cut within .0005 of an inch of factory specifications, and all locks will be keyed to each manufacturer’s depth space data. Contact your sales representative for more information about code keying. Lockwork Specialties Cwip # 15143 11000 28547 10975 69857 11015 22120 10999 29752 18743 11006 Cwip # Type Master Keying, New Locks Rekey/Master: with 2 keys: old locks Rekey/Master: with 3 Keys: old locks Rekey with no keys, new locks Rekey with 2 keys, old locks Key Cut, single Key Cut original key Key Cut, stamp: interchangeable core Key Cut, MEDECO Key Alike Key Alike/Master 11003 11020 11001 10984 11008 32837 32836 32835 18756 21411 Type Key in Pairs Key in Pairs/Master Key, master: interchangeable core Key, master: grand master: I-core Master Keying: HPC with 2 keys Rekey/master: HPC with 2 keys Rekey/no master: HPC with 2 keys Key different/no master: HPC w/2 keys Neutering Lockwork: repair: key machine, etc. Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Safety Security 395 HARDWARE 396 Quality Key Blanks www.cwip.com Arrow Bommer Cutler Corbin 11885 18398 11770 11644 23416 20993 27711 32385 23440 Mfg.# K2 K7 H20 H21 Z1-59A1-6 Z1-059AB-6 Z1-60-5 Z1-60-5 - ILCO 1179 1179A 1003M R1003M A1001AH A100ABM 1001EH A1001EH 1181C EZ/ESP AR1 AR4 C0106 BO1 CO91 CO89 CO87 CO88 CU2 Taylor 135 AR4 R22B 22B A22A1 A22GM 87-22Z2 A22Z2 C115 Cwip # Eagle Dexter Falcon ILCO 22144 11884 20854 20973 12487 Mfg.# 67N 11929B P1577G X1054K X1054F ILCO D1054K X1014F A1054WD X1054K X1054F EZ/ESP DE6 EA27 FA3 IN3 IN18 Taylor 54DR X61F F54GA X54K X54F Cwip # ILCO Keil Kwikset Kwikset Titan Lockwood Rekeying tool. Cwip # 35556 Pkg/10 Cwip # 11887 11886 12237 12935 37680 31317 12486 26750 Mfg.# 1054F 1054MT 2HK 1063 A1176 8260 L1-35 L4-35A ILCO 1054F 1054MT 1079B 1176 A1176 A1176ST 1004 1004A EZ/ESP IN1 IN33 K2 KW1 KW5 KW10 L1 L4 Taylor 54F 54MT 79HK 54KS - 35 35A $ BEST VALUE ECO-FRIENDLY Quality Key Blanks www.cwip.com HARDWARE Master Medeco 11528 11645 12236 39708 11769 39132 U/M Each 38500 U/M Bx/50 Mfg.# 1K 7K 15K 27K 17K - - ILCO 1092 1092B 1092N 1092NR 1092H 1515 A1515 EZ/ESP M1 M2 M10 M16 M11 - - Taylor 92 92B 92N 92NR 92T - - Cwip # National Cabinet Russwin Can be used in place of other D-1,D-2,D-3,d-4 Cwip # 11771 32622 22072 22119 11526 24328 22861 20933 36906 27917 Mfg.# D4292 D4291 6D2R 6D3R 6D4R 6D41R 5D1R 6D1R - - ILCO 1069LB 1069L A1011D2 A1011D3 A1011D4 A1011D41 1011D1 A1011D1 A1011P 1011P EZ/ESP NA12 NA14 RU19 RU45 RU46 RU16 RU4 Taylor 174BA 174B A57-41D 57-1D A57-1D 57-PA 55-P A57-2D A57-3D Sargent Russwin 6 Pin Cwip # 37388 28330 Mfg.# 6H6R RU20 ILCO EZ/ESP Taylor A1011H6 57-6H A57-4D A1011D41 - 5 Pin 5 Pin 6 Pin 5 Pin 6 Pin 5 Pin 6 Pin 11641 20894 26478 22244 22173 22368 22464 275S 275LA 6275LA 275LF 6275RB 275RG 6275RG 1010N 1007LA O1007LA 1007LF O1007RB 1007RG O1007RG S68 S22 /2 S22 51S 43LA O43LA 43LF O43RB 43RG O43RG 1 397 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 398 Quality Key Blanks (Continued) Sargent (Continued) www.cwip.com Schlage Master blank Master blank. Can be used in other “L” blanks. 6 Pin Cwip # 31134 6 Pin 5 Pin 5 Pin 6 Pin 6 Pin 5 Pin 5 Pin 31135 22549 12120 19377 19369 12608 22305 20874 Mfg.# 6275RN 6275LN 270LN 35-100-C 35-101-C 35-101-E 35-100-E 35-100-F 35-200W ILCO N1007RMA N1007KMA 1007KMB 1145 1145A A1145CE 1145E 1145F 1307W EZ/ESP S31 - S16 SC1 SC4 SC9 SC8 SC7 SC22 Taylor 49RM 049KM 49KM 145 145A 145E 145ES 145FS 307W Segal Taylor Weslock Weiser 5 Pin XL Lock 6 Pin 11643 11642 12944 22222 19803 29996 Mfg.# K9 111GE 1555 1559 12344 DUR-XL7 ILCO 1022 1141GE 1054WB A1054WB 1175N 1180S EZ/ESP SE1 T7 WR3/WR5 WR4 WK2 XL7 Taylor 102 111GE 54WB 54WA 175W XL16 Cwip # Yale Falcon Interchangeable Core Key Blanks 6 Pin 6 Pin 11525 5 Pin 20834 22184 27547 11995 Mfg.# 9114 8E1R 11E1R - EN8E1R ILCO O1122 999 999A 998 999N EZ/ESP Y11 Y-1 Y2 Y4 Y1E Taylor 7NX 14 14A - E14 Cwip # $ BEST VALUE ECO-FRIENDLY Cwip # Keyway Pin # U/M 24977 A 6 Box/50 24978 B 6 Box/50 24979 C 6 Box/50 24980 D 6 Box/50 24982 F 6 Box/50 24983 G 6 Box/50 Falcon Standard Bow Key Blanks Cwip # Keyway Pin # Wgt.lb. U/M 19670 G 5 1.0 Box/50 19692 G 6 1.0 Box/50 Quality Key Blanks www.cwip.com Keyway Pin # Wgt.lb. U/M Cwip # Keyway Pin # Wgt.lb. U/M 26225 LB 5 1.1 Box/50 23952 C 5 1.2 Box/50 24378 LN 5 1.1 Box/50 24640 E 5 1.2 Box/50 C Box/50 Cwip # 28728 LF 5 1.1 Box/50 27290 6 1.2 38102 LG 6 1.1 Box/50 27644 E 6 1.2 Box/50 24687 RC 6 1.1 Box/50 28021 CE 6 1.2 Box/50 31220 RL 6 1.1 Box/50 Top Pins - Pkg/144 Manufacturers Hard brass, alloy 360, .115 diameter. Flat top/master pins have standard chamfer and range in size from .010T to .200T in 5/1000 increments. Standard colors: red, green, gold, purple, and silver. Specific Brand Only Cwip # Size - 82219 .010-T Specific Brand Only Cwip # Size S 82228 .105-T S 82367 .015-T W 82218 .110-T W 81757 .020-T K 82366 .115-T K 21732 .025-T S 82357 .120-T S 82298 .030-T W 82365 .125-T W 82225 .035-T - 82214 .130-T - 21733 .040-T S 21665 .135-T S/K 82224 .045-T K 21666 .140-T 82227 .050-T W 82410 .145-T W 82356 .055-T - 21667 .150-T S 82226 .060-T - 82213 .155-T 81745 .065-T W 82358 .160-T W/K 81746 .070-T - 82411 .165-T S 81747 .075-T - 82220 .170-T 21734 .080-T - 82212 .180-T 82192 .085-T - 82221 .185-T 82193 .090-T - 21751 .195-T 82194 .095-T - 82413 .200-T 82195 .100-T S/K/W Bottom Pins - Pkg/144 S = Schlage K = Kwikset W = Weiser Hard brass, alloy 360, .115 diameter. Flat top pins range in size from .125B to .335B, available in 5/1000 increments. Standard colors: red, green, gold, purple, and silver. Specific Brand Only Cwip # Size W/S K S W S/K W S W/K S - 82414 21753 21669 21754 82416 21755 82417 21756 82418 21757 82419 21675 82198 82371 82369 82370 82359 82368 21668 21673 21671 .130-B .135-B .140-B .145-B .150-B .155-B .160-B .165-B .170-B .175-B .180-B .185-B .190-B .195-B .200-B .205-B .210-B .215-B .220-B .225-B .230-B Specific Brand Only S/K/W S W K S W S/K W S W W - Cwip # Size Size 21670 21678 21674 21672 21735 82373 82232 82408 21695 21762 21736 82231 21763 28665 21794 82196 82197 82230 21764 21765 21793 21775 .235-B .240-B .245-B .250-B .255-B .260-B .265-B .270-B .275-B .280-B .285-B .290-B .295-B .297-B .300-B .305-B .310-B .315-B .320-B .325-B .330-B .335-B Kwikset/Titan Top Pins .023” .046” .069” .092” Cwip # 33477 Pkg/100 34424 Pkg/100 34294 Pkg/100 34422 Pkg/100 .138” .115” 33943 Pkg/100 34421 Pkg/100 Kwikset/Titan Bottom Pins .172” Cwip # 33472 Pkg/100 .195” 33473 Pkg/100 .218” 33474 Pkg/100 .241” 33475 Pkg/100 .287” .254” 33476 Pkg/100 33941 Pkg/100 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Schlage Original Key Blanks Sargent Original Key Blanks 399 HARDWARE 400 Keying Supplies www.cwip.com Universal Pin Conversion Charts For Kwikset 1 2 3 4 5 6 For Falcon/Weiser For Schlage Bottom Pin Top Pin 1 2 3 4 5 6 82418 82371 21668 21678 82232 21736 Bottom Pin 21756 82419 82371 82359 21673 21678 21735 82408 21736 21794 0 1 2 3 4 5 6 7 8 9 21732 82224 81746 82193 82366 21666 Top Pin Bottom Pin 82367 82298 82224 82226 81747 82193 82228 82357 21665 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 Top Pin 21756 21675 82370 21668 21678 82373 21695 21763 82197 21793 81757 82225 82356 81746 82193 82218 82365 82410 82358 1 2 3 4 5 6 7 8 9 Universal Pin Kit Can be used for brands: Corbin Russwin; Kwikset/Titan; Weiser; Schlage; Falcon; Arrow; Ilco; Ultra. Cwip # 22631 Schlage® Keying Kit Contents: • Top pins 34 sizes .010 to .200 by 5/1000 increments • Bottom pins 40 sizes .165 to .360 by 5/1000 increments • Cylinder springs .115 diameter. • Spool driver pins 6 sizes: J-172, J-187, J-207, J-240, J-273, & J-320 • Steel carrying case with molded plastic pin tray Kwikset Titan® Rekeying Tool Kwikset/Titan® Master Keying Kit Contains all of the basic materials to rekey most Schlage knobs and levers. Includes: bottom pins, top pins, springs, cylinder caps, cap pins, key gauge and plug follower. Cwip # Schlage # U/M 36331 40-134 Kit Kwikset Key Gauge Lock Rekeying Tweezers Cwip # Mfg. # U/M 37524 272 Kit Kwikset Deadbolt Cylinder (Only) Retainer Cwip # U/M Cwip # U/M Cwip # U/M Cwip # U/M 35556 Pkg/10 34419 Each 28432 Each 29243 Bg/100 Tumbler Springs $ Cwip # Wgt.lb. U/M 34295 .10 Pkg/100 BEST VALUE ECO-FRIENDLY Kwikset 5-Pin Spring Cover Cwip # Wgt.lb. U/M 34417 .10 Pkg/50 Keying Supplies & Key Cabinets/Accessories www.cwip.com HARDWARE Plastic Following Tool Cwip # Type U/M 28437 .550 Dia. for Corbin Russwin Each Cylinder Removal Tool 34418 .498 Dia. for Kwikset, Schlage, Weiser Each Cwip # Wgt.lb. U/M 28871 .04 Each B A Single Tag Key Cabinets Single Tag Key Cabinet Extra Large • Heavy-guage steel; color: sand • Numbered key tags mounted on slotted key racks • Includes alphabetical and numerical location data charts Cwip # Key Capacity H x Wx D U/M 33493 30 12.2” x 7.5” x 2.95” Each 24071 60 121/8” x 105/8” x 3” Each 36467 110 171/8” x 14” x 31/8” Each 36299 160 20 /8” x 16 /2” x 4 /8” Each 36403 240 201/8” x 161/2” x 47/8” Each 1 1 7 B A Cabinet Includes: • Knob-lock key handles and double hinged key panels • Numbered key tags—each accommodates 1-3 keys • Index charts—key tag and lock identification is simplified by using numerical and alphabetical index charts Cwip # Key Capacity HxWxD Wgt.lb. U/M A 22172 330 20” x 161/2” x 5” 21 Each B 22459 500 25-1/4” x 18” x 51/2” 39 Each Key Tags & Key Rings Cwip # C D Size U/M A 11649 Metal Rim Tags With attached string, looped and knotted 1-1/2” Bx/100 B 19877 Metal Rim Tags Split wire ring 1-1/4” Bx/50 C 11780 Lightweight Fiber Tag Snap type; 1-1/4” 1-1/4” Bx/100 D 22024 Split Key Ring Tempered hard steel, nickel plated 7/ 8” Bx/100 2” Bx/50 5/8” Bx/1000 11624 G E F Description E 22714 Economy Key Rings Spring steel wire; zinc plated F 36623 Shamrock Key Tags White w/snap Bx/100 G 23519 Plain Plastic Key Tags Bx/100 Automatic Retractable Pull Key Reel Attaches to belt with large 2” clip. Cwip # Size U/M 11753 Extends to 20” Each 401 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Key Machines www.cwip.com HARDWARE 402 Premier Speedex® Key Machine Ensures accurately cut keys. 120V AC motor. Includes: CW-23MC cutter; bronze bearings; rotary brush; reversible cutting jaws; double-sided copy dog (machine cuts flat-steel, safe box keys w/optional cutter). Cwip # HPC # Cutter Wheel U/M 26850 9160MC 36373 (23MC) Each Ilco® Heavy Duty Manual Key Machine Duplicates cylinder and auto key blanks. 110V AC motor. Includes: Titanium nitrite coated cutter; depth adjustment dial; “soft touch” deburring brush; (2) 4-way vise jaws. Cwip # Mfg. # Cutter Wheel U/M 38458 045 28023 (23MC) Each Ilco® Mini-Mite Key Machine Reversible vises rotate to cut both single and double sided keys. Equipped with rotary file cutter. Special four-sided key rake for deburring keys. Gauge fork aligns key blanks accurately. 110V AC motor. Mini Speedex® Key Machine Includes: Rotary milling center; bronze bearings; rotary brush; reversible cutting jaws; double-sided copy dog (machine cuts flatsteel and safe box keys with optional cutter). Cwip # Mfg.# Size U/M 11751 08 8” x 51/4” x 4” Each Replacement Parts Cwip # HPC # Cutter Wheel U/M 20733 Rotary File Cutter Each 26849 9120RM 38482 (23RM) Each 30017 Motor Each 17705 Drive Belt Each Key Machine Deburring Brush - Nylon Filament Key Machine Cutter Wheel Milling Cutter - High Speed Steel Cwip # Mfg. # Description Wgt.lb. U/M 23277 2-7/8” 9MC .34 Each 17327 2-1/4” 34MC .206 Th., 1/2” hole dia. Fits Ilco 016, 017, 018 .250 Th., 1/2” hole dia. Fits Ilco 7585DV, H2584CV, 2184CD .30 Each Dia. Cwip # Dia. Description U/M 16175 3” 1/2” Hole dia. Each Graphite Gun Leak-Proof Clog-Proof Loosens tight wafers and pins. Ideal for lubrication. Key Machine Cutter Wheel 28023 2-1/4” P-X23MC Fits DL 145,145M,143M .22 .250 Th., 1/2” hole dia. $ BEST VALUE U/M 1/3 oz. Each Extra-Fine Graphite Dry Powder Lubricant Rotary File Cutter - Carbon Steel 23RF Size 13339 Each Fits Ilco 023,045 20733 2-1/4” Cwip # .34 ECO-FRIENDLY Each 19831 Each Padlocks www.cwip.com B Cwip # A 16660 B No. 1, No. 5 A Mfg.# Key # Dia. Shackle Size U/M 24308 No. 1 2001 5/16” 15/16” - 3/4” Each 16635 No. 1 2002 5/16” 15/16” - 3/4” Each 26213 No. 1 2285 5/16” 15/16” - 3/4” Each 2359 5/16” 15/16” - 3/4” Each 23379 No. 1 KD 1/4” 5/8” - 9/16” Each 34755 280 1/4” 5/8” - 9/16” Each 22237 P378 3/16” 9/16” - 1/2” Each 16611 P761 3/16” 9/16” - 1/2” Each 82244 P812 3/16” 9/16” - 1/2” Each No. 3 With (2) brass keys. Key Blank 11528 3/4” - 5/8” Each 3/4” - 5/8” Each 23756 2529 9/32” 3/4” - 5/8” Each 81365 3220 9/32” 3/4” - 5/8” Each 19357 3252 9/32” 3/4” - 5/8” Each 15557 3303 9/32” 3/4” - 5/8” Each 20391 3390 9/32” 3/4” - 5/8” Each 24762 3693 9/32” 3/4” - 5/8” Each 82189 3753 9/32” 3/4” - 5/8” Each 81426 3829 9/32” 3/4” - 5/8” Each 21525 3945 9/32” 3/4” - 5/8” Each 19451 KD 9/32” 3/4” - 5/8” Each 35543 3Red - KD 9/32” 3/4” - 5/8” Each Each 35544 3Green - KD 9/32” 3/4” - 5/8” Each Each 35552 3Yellow - KD 9/32” 3/4” - 5/8” Each 17673 No. 1 KD 5/16” 15/16” - 3/4” Each 82187 No. 5 A105 3/8” 1” - 15/16” Each 16728 No. 5 A112 3/8” 1” - 15/16” Each 25827 No. 5 A116 3/8” 1” - 15/16” Each 25826 No. 5 A155 3/8” 1” - 15/16” Each 24081 No. 5 A272 3/8” 1” - 15/16” Each 36274 No.5 A389 3/8” 1” - 15/16” Each 35461 No. 5 A870 3/8” 1” - 15/16” Each 28253 No. 5 A1863 1” - 15/16” 17667 9/32” Each 3/8” Each 9/32” 15/16” - 3/4” KD 7/16” - 13/32” 0536 5/16” No. 5 5/32” 0464 2506 17672 L23 82188 No. 1 1” - 15/16” U/M 21772 30989 3/8” Shackle Size No. 7 With (2) brass keys. Key Blank 11645 With 2 brass keys. Key Blank 11528 Cwip # Dia. No. 22 With (2) nickel plated keys. Key Blank 11645 C C Key # No. 10 With (2) nickel plated keys. Key Blank 11645 C No. 21 Rekeyable Padlock • 1-3/4” wide case, 5-pin tumbler cylinder • Case-hardened steel shackle 5/16” diameter • Shackle 15/16” vertical, 3/4” horizontal A B A Cwip # Keying Key Blank U/M 12221 KA 39708 Each No. 27 Rekeyable Padlock • 2” wide case, 5-pin tumbler cylinder • Case-hardened steel shackle 7/16” diameter • Shackle 1” vertical, 2” horizontal B Cwip # Keying Key Blank U/M 12387 KD 39708 Each C No. 220 Rekeyable Padlock • 2” wide case and 5-pin tumbler W27 cylinder • Replaceable case-hardened shackle: 7/16” diameter • Shackle 1” vertical, 3/4” horizontal • Rust resistant • Triple-plated copper/nickel/chrome finish C Cwip # Keying Key Blank U/M 12382 KD 11769 Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE A 403 Padlocks (Continued) HARDWARE 404 www.cwip.com If your key looks like this... custom keying of a Master Lock No. 1, No. 3, or No. 5 padlock can be performed in minutes. Universal Pin Keying System Uncoded Padlocks The Master Lock One Key System™allows every padlock you buy to be keyed to an already existing key. Easy and convenient. Key(s) not included with these locks. B A Cwip # Mfg. # Type U/M A 33361 3UP No. 3 Padlock Each B 33364 5UP No. 5 Padlock Each C 33360 376 Keying Tool Each 33360 is required for the above padlocks. C Master No. 1 Padlock Key #2001 • 1-3/4" wide laminated steel body for superior strength • Hardened steel shackle for extra cut resistance • 4-pin cylinder helps prevent picking • Dual locking levers • Recommended for high security uses • 21⁄2” laminated steel case, highly resistant to physical abuse • Case-hardened steel shackle: 7/16” diameter • Shackle 11⁄4” vertical, 13⁄16” horizontal • Para-centric keyway, exclusive to No. 15 padlock only Master No. 475 Pin Tumbler Hasplock • 4-pin tumbler security • 1-3/4” wide laminated steel padlock • Permanently attached to heavy-duty slide bolt and 41/2” wrought steel hasp • Easy to install • Unique pinless hinge • Key No. 2429 Cwip # Mfg. # Keying U/M Cwip # Keying Key Blank U/M Cwip # Keying Key Blank U/M 39740 1KALJ KA Each 16674 KD 12236 Each 12245 KA 11528 Each Resettable Combination Padlock • • • • Master No. 15 Padlock 5-Pin Tumbler 2" wide body 5/16” shackle Set-your-own combination Resettable to 10,000 combinations Cwip # Size U/M 33322 2” Each $ BEST VALUE Laminated Steel Padlock Solid brass cylinders, hardened steel shackle, 4-pin tumblers, and rust-resistant; with 2 keys. Cwip # $ 22652 ECO-FRIENDLY Size Keying U/M 1-1/2” KA Each Master No. 5400 Select Access™ Key Storage Security Lock • Holds over 5 keys • 4 dial resettable combination • Reinforced body/shackle withstands hammering, sawing and weather conditions • 39/16"W x 4"L x 19/16" deep Cwip # U/M 38104 Each Chain, Door Guards & Door Chimes www.cwip.com Economy Chain Door Guard With Screws 3/16” Lightweight welded steel chain. Case hardened, zinc plated, with flexible vinyl protective cover. Cwip # Size Wgt.lb. U/M 12593 3’ Long 1.8 Each Welded chain for extra security. Coil Chain Grade 30 Proof 37543 Size 1/4” Finish U/M 36535 Satin Nickel Each 16585 Brass Plated Box/10 32398 Polished Chrome Box/10 36682 Oil-Rubbed Bronze Each Solid Brass Low carbon steel chain. Zinc plated. Cwip # Cwip # U/M 36216 Brass Box/10 Pail/100’ 16656 Chrome Plated Box/10 A Security Lock Pin Security Pin For windows, refrigerators and ice boxes. For sliding wood or metal doors and windows. Nickel beaded chain. Chain Door Guard Brass Plated With key lock and 2 keys. Cwip # Wgt.lb. U/M Cwip # A Size U/M 13792 .03 Each 11177 2-3/4” x 3/16” Each Cwip # Wgt.lb. U/M Each 12039 .68 Each 39155 A B 1-3/8” x 3/16” Deluxe Non-Electric Door Chimes • Modern, deep-recessed one-way viewing mirror. • Apartment identification plate with name plate. A B Cwip # Finish Size U/M 20975 Silver 7” H x 3” W Each 15776 Gold 7” H x 3” W Each 14810 Gold 2-1/4” x 2” Each Non-Electric Door Chime/Viewers • One-way wide angle viewing lens with chime. • Apartment identification plate. C D C Cwip # Finish Size U/M 15782 Silver 5” H x 2” W Each 15783 Bronze 5” H x 2” W Each 32858 Gold 5” H x 2” W Each Multi-Family Pushbutton w/Name Plates Non-lighted; includes apartment identification plates. D Cwip # Finish Size U/M 37297 Brass 43⁄4” H x 15⁄8” W Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Lightweight Chain 405 Door Chimes & Door Viewers HARDWARE 406 A www.cwip.com Round Pushbutton Door Bells B Type Cwip # A 39382 Lighted, White w/Clear Trim 13/16” Dia. Each 28514 Lighted, Ivory w/Gold Trim B C D U/M Size 13/16” Dia. Each 33243 Brass Finish (See below) Each Thumb turn door bell fits all doors: 1-3/8” to 2” thick. 5/16” square connecting shaft. Loud, clear ring. Specs: outside turn plate: 1-5/8” x 3-3/4”; inside bell dia.: 3”. Rectangular Pushbutton Door Bells Cwip # Finish Size U/M C 30357 White, black trim 27⁄8” x 7/8” Each D 29697 Ivory, silver trim 21/4” High Each Solid Brass Door Viewers Cwip # Finish Lens Angle Fits Doors U/M 17801 Brass 180° 13⁄8” 21⁄8” Each 28993 Chrome 180° 13⁄8” 21⁄8” Each 36538 Antique Brass 180° 13⁄8” 21⁄8” Each 36562 Satin Nickel 180° 13⁄8” 21⁄8” Each 36584 Oil-Rubbed Bronze 180° 1 ⁄8” 2 ⁄8” Each 12292 Brass 200° 1 ⁄8” 2 ⁄8” Each 3 3 1 3 Jumbo 190° Door Viewer Polished brass front plate is 3-1/2” x 4-1/8”. Solid Brass 1-Way Door Viewer Cwip # Cwip # Finish Lens Angle Fits Doors U/M 16602 Brass 160° 13⁄8” 21⁄4” Each 12730 Satin Chrome 160° 13⁄8” 21⁄16” Each 38732 Antique Brass 160° 1 ⁄8” 2 ⁄4” Each 36595 Satin Nickel 160° 13⁄8” 21⁄4” Each 38706 Oil-Rubbed Bronze 160° 1 ⁄8” 2 ⁄4” Each 3 3 1 1 17800 Fits Doors U/M Up to 2-1/8” Each Surface Mounted Buzzer • 4-6 Volt DC, 8-16 volt AC • Sturdy steel base and cover • Designed to operate on either bell ringing transformers or batteries Suitefone Replacement Panel Cwip # U/M 30013 Each Cwip # Type Color Size U/M 25768 6-Wire White 67⁄8”H x 61⁄8”W Each Tektone® Intercom Station 33329 3-Wire White 71⁄2”H x 61⁄8”W Each Clear voice communication with positive door release operation. Flush mounted station manufactured of flame retardant type ABS plastic. • TALK, LISTEN and DOOR functions • 3-1/2” speaker with voice response • Connection: screw terminals standard Door Bell Rubber Grommet Cwip # Wgt.lb. U/M 15778 .02 Each $ BEST VALUE ECO-FRIENDLY Cwip # Mfg. # 38084 IR104C W x H x Depth U/M 5” x 67⁄8” x 11⁄2” Each Door Chimes & Door Knockers www.cwip.com Electric Door Chime Model LA11 A 10 second strobe light is activated when door chime sounds. Battery operated pushbutton, no wiring needed; includes battery. Cwip # Size Wgt.lb. U/M 33136 3-1/4”W x 4-1/2”H 1.5 Each Powered by 10V or 16V transformer. For 1 or 2-door operation. Cwip # 23375 Finish Size Wgt.lb. U/M 1.5 Each Off-White Textured 5-1/4” x 7-1/2” Wireless Plug-in Door Chime White Wireless Battery Door Chime • • • • • 3 sound options • Different sounds for front and back doors • 32 selectable codes • Adjustable volume control Plugs into a 120V AC outlet Pushbutton battery included 150’ range Size: 4-3/4” x 2-7/8” x 1-3/8” Cwip # Wgt.lb. U/M Cwip # LxWxH U/M 38517 2.0 Each 39796 111/4” x 9” x 12” Each 3-1/4” 3-1/4” 6-1/2” 6-1/2” Solid Brass Door Knocker With 160° Viewer Solid Brass Door Knocker (Without viewer) Door Knocker With 180° Viewer Colonial/contemporary pattern Cwip # Finish U/M Cwip # Finish U/M Cwip # Finish U/M 37312 Satin Nickel Each 16718 Polished Brass Each 32888 Polished Brass Each Door Knockers With 160° Viewer • Fits 1/2” hole • Adjustable to fit 1-1/8” to 1-7/8” doors • Overall size: 1-3/4” x 4” Door Knocker With Card Holder 2” x 5/8” Name plate card; zinc die cast construction Cwip # Finish U/M Cwip # Finish U/M 30902 Polished Brass Each 23058 Polished Brass Each 36523 Antique Brass Each 38699 Oil-Rubbed Bronze Each 38692 Satin Nickel Each 36513 Polished Chrome Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE White Visual Door Chime 407 House Numbers & Door Stops www.cwip.com HARDWARE 408 3” Colonial Hammered Black House Numbers Die Cast 8” Block Style Black Plastic Numbers 3” Heritage House Numbers - Solid Brass 100% Acrylic; injection-molded. Cwip # Number U/M Cwip # Number U/M Cwip # Number U/M 26481 0 Each 17044 0 Each 19853 0 Each 26482 1 Each 16937 1 Each 19873 1 Each 26483 2 Each 24773 2 Each 19893 2 Each 26484 3 Each 16845 3 Each 13469 3 Each 26485 4 Each 24774 4 Each 19913 4 Each 5 Each 19933 5 Each 26488 5 Each 16990 26487 6 Each 17045 6 Each 19953 6 Each 29340 7 Each 16846 7 Each 19973 7 Each 26489 8 Each 17004 8 Each 19993 8 Each Each 16938 9 Each 19874 9 Each 26497 9 Door Stops Ives® 3” Rigid Door Stops Flexible Spring Door Stops Cwip # Finish U/M Cwip # Size Finish U/M 82405 Bright Brass Box/25 11920 3” Bright Brass Box/25 34685 Bright Nickel Box/25 36095 3” Satin Nickel Each 36619 3” Dull Chrome Each 36610 3” Antique Brass Each 31281 4” Bright Brass Box/25 3” Standard Rigid Door Stops Cwip # Finish U/M 11921 Bright Brass Box/25 19826 Chrome Box/25 36063 Satin Nickel Each Cwip # Finish U/M 36638 Antique Brass Each 24205 Brass Plated Box/100 36498 Brass Plated 3” Flexible Door Stops 4” Heavy Duty Rigid Door Stops 35968 35976 39134 Dull Chrome Brass plated 33700 Pkg/10 34582 Each 36087 Satin Nickel Each 36627 Oil-Rubbed Bronze Each 36621 Antique Brass Each Chrome A Rubber Door Stop Tips Cwip # Color U/M A 35835 White Bx/50 B 82147 White Cd/6 B $ BEST VALUE Each Pkg/10 ECO-FRIENDLY Box/50 Each Door Stops www.cwip.com • Cast brass • Operated by foot • Threaded rubber shoe Ives® Hinge Pin Door Stop • • • • Accommodates 1/4” 5/16” dia. hinge pins Cwip # Finish U/M 14557 Aluminum Each Hinge Pin Door Stop Cwip # Finish U/M 12526 Brass Plated Bx/25 36079 Satin Nickel Each 36641 Antique Brass Each 36657 Oil-Rubbed Bronze Each Cwip # Size Finish U/M Cwip # Finish U/M 16759 4” Bright Brass Each 33888 Bronze Each 16713 4” Aluminum Each $ 39062 4” Aluminum Each 36658 4” Bronze Each 16632 5” Aluminum Each 16653 5” Bright Brass Each 5” Bronze Each 36642 26129 Replacement Tip 33839 Black Each Each Replacement Tips Hinge Pin Door Stop Steel door openings: 70° 100°. Zinc alloy construction Non-marking rubber tip 7” body height Hardware included Ives® Door Stop Angle Door Stop Height: 1-5/16”; base: 1-1/4”. Cwip # Finish U/M Cwip # Finish U/M Cwip # Finish U/M 14617 Brass Plated Each 12393 Brass Plated Bx/25 16580 Bright Brass Bx/25 Ives® Door Stop Height: 3-1/2”; base: 2-1/2” Cwip # Finish U/M 16762 Satin Chrome Each Ives® Door Stop & Holder Harvey® Door Stop & Holder Height: 3-5/8”; base: 2-1/2” Height: 3-5/8”; base: 2-1/2” Cwip # Finish U/M Cwip # Finish U/M 16887 Satin Chrome Each 21977 Aluminum Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Heavy Duty Kick Down Holder Drop Down Lever Door Stop 409 Door Stops (Continued) & Wall Bumpers HARDWARE 410 1” www.cwip.com 1-1/4” Dome Door Stops Wall Bumpers Base size: 2” x 1-5/8”; stud projection: 3/4” Solid rubber; toggle and back plate installation. Cwip # Size Finish Cwip # U/M 14397 1” Bright Brass Each 14088 1” Satin Chrome Each 14211 1 1 /4” Bright Brass Each 14045 11/4” Satin Chrome Each A 15759 34628 B 20617 38762 Type Base H x D Projection Finish U/M ⁄8” x 21⁄2” 15/16” Bright Brass Each ⁄8” x 21⁄2” 15/16” Dull Chrome Each ⁄8” x 2 ⁄2” 15/16” Satin Stainless Steel Each ⁄8” x 21⁄2” 15/16” Brass Each 3 Concave 3 3 Convex 3 1 Plastic Nail-On Furniture Glides Rubber Wedge Door Stop Cwip # Color U/M Cwip # Size U/M 81818 Brown Pkg/2 39267 3/4” Pkg/24 Rubber Door Silencer Cwip # U/M 19580 Bx/25 High impact white polystyrene that can be painted or papered. Repairs areas of wall damage. Finger Pull Clear high-impact plastic protects hightraffic corners from chipping, tearing, denting, scratching or smudging. Cwip # Size U/M Cwip # Size U/M 28097 3” Diameter Each 23953 3/4” x 4’ Self-Stick Length 28096 5” Diameter Each 26123 3/4” x 8’ With Nails Length Economy Sliding Door Pulls B A Corner Protectors Wall Protector Gray molded rubber for metal door frames with 1/2” head diameter. Built-in Prong Cwip # Finish I.D. Size U/M 36507 Brass 21⁄8” Each 33554 Satin Nickel 21⁄8” Each 38689 Dull Chrome 21/8” Each Flush Pulls For Sliding Doors Cwip # Finish “A” Dia. A 13000 Bright Brass 3/4” 1” B 13725 Bright Brass 2-1/8” 2-7/16” 7/16” Each 2-1/8” 2-7/16” 7/16” Each 39399 Satin Chrome $ BEST VALUE “B” Dia. “C” U/M 11/32” Bag/4 ECO-FRIENDLY Ives® Sliding Door Edge Pull Bright Brass Finish Cwip # Size U/M 14084 3-7/8” x 3/4” x 1- 5/8” Each Door Pulls & Door Closers www.cwip.com HARDWARE Pull Plate & Handle With Screws A Cwip # B A 19854 Type 22610 Brass Size U/M 3-1/2” x 15” Each 3-1/2” x 15” Each Finish Stainless Steel Dull Aluminum Bright Brass Push Plate With Screws - Beveled B 20139 Stainless Steel Dull Aluminum 22609 Brass Bright Brass 3-1/2” x 15” Each 3-1/2” x 15” Each Kick Plate With Screws C C 5-3/4” 10” x 34” Each Bright Brass 10” x 36” Each 22608 Brass Bright Brass 6” x 35” Each 34717 Brass Bright Brass 8” x 34” Each 28325 Brass Bright Brass 8” x 36” Each Wgt.lb. .15 Aluminum Mill Aluminum 3” x 36” Each Ives® Door Pull Bright Brass Garage Door Pull Zinc Plated 39046 Bright Brass Stainless Steel 39846 D Size - 21585 Kick Plate w/Gray Vinyl Insert D Cwip # 37311 Door Pull - Brass Finish Non-rusting aluminum. Cwip # U/M 14378 Each OA Length 4-7/8” U/M Cwip # OA Length Wgt.lb. U/M Box/20 38996 4-3/4” .04 Each Wgt.lb. .08 Continued » Door Closers Door Closers Non-handed for standard, top jamb or parallel arm installation. Rack and pinion mechanism contained in a high tensile precision cast aluminum housing. A B Int. Door Size Ext. Door Size Swing Out/In Cwip # Trade Size Finish 32924 #2 Alum. 36” 32” 28” Each 16633 #3 Alum. 42” 36” 32” Each 16716 #4 Alum. 48” 42” 36” Each 35678 #4 Bronze 48” 42” 36” U/M Each A 16955 Replacement Door Closer Forearm Each B 30240 Replacement Door Closer Main Arm Each C 25343 Parallel Bracket for Regular Arm Each C Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 411 Door Closers (Continued) www.cwip.com HARDWARE 412 Pneumatic Door Closer Heavy Duty Door Closer With Back Check White Mini Door Closer Non-handed door closer automatically closes door. Includes 3-1/4” x 7/8” roll plate and a heavy duty zinc die cast housing. Full 90° opening. Two-hole end plug for summer or winter adjustable latching power. Adjustable closing speed, factory lubricated. With replacement cover plate. Engineered with lowered spring power for easier opening in ADA applications. Non-handed. Cast iron body. Cwip # Finish U/M Cwip # Finish U/M 32301 White Each 34835 Aluminum Each Cwip # Finish U/M 23500 Black Each Adjustable Hydraulic Door Closer Heavy Duty Hydraulic Door Closer For doors 1-1/4” thick For doors up to 1-1/4” thick Cwip # Finish U/M Cwip # Finish U/M 11301 Aluminum Each 16571 Aluminum Each Hinge Pin Door Closer Door Closer With Adjustable Wrench • For interior doors • Use two closers for doors over 60 lbs. • Use with 3-1/2” and 4” hinges • Closing speed adjustable for turning valve screw • Positive locking device to hold door open • Will fit regular or narrow bracket Cwip # Finish U/M Cwip # Finish U/M 11532 Aluminum Each 36158 Dull Brass Each Screen & Storm Door Hardware Free-Hanging Push Button Latch • Fits doors 1“ 11/4” thick • Installation hole spacing 1-3/4” • Installs in three 1/4” holes Cwip # Finish U/M 23501 Aluminum Each $ BEST VALUE Continued » Push Button Latch Fits doors 1“ 1-1/4” thick Screen Door Inside Latch 1-3/4” center Cwip # Finish Center U/M 16621 Aluminum 13/4” Each Cwip # Finish U/M 21236 Black 13/4” Each 38331 Black Each 39236 Black 11/2” Each ECO-FRIENDLY Screen & Storm Door Hardware www.cwip.com Standard Gate & Door Spring • Fits all makes of storm door locks • High strike offset • Furnished w/screws Cwip # Finish U/M 37940 Black Each HARDWARE Storm Door Lock Keeper Zinc plated, rustproof, 16-gauge steel spring wire. With (2) screw hooks. Cwip # Dia. x L U/M 14270 (#4) 23/64” x 163/8” Bx/10 Patio Door Security Hardware Patio Door Security Bars Jimmy-proofs sliding glass doors. Anodized aluminum tubing, cadmium plated steel hinge bracket and plastic end bracket. Cwip # Size Finish Door Size U/M 23454 60” Aluminum 48” 60” Each 16643 48” Aluminum 36” 48” Each 30604 48” Bronze 36” 48” Each 38199 48” White 36” 48” Each 22018 Kit Replacement Hardware Socket bracket, plastic cap, metal pin, screws. Patio Door Security Lock Sliding Glass Door Handle Mounts in any position. Adjusts to fit all patio sliding doors. Also fits sliding and double-hung windows. Finger or foot lever control. • Surface mount; hook style • Handle holes: 4 15/16” c/c • Side mount holes: 3 1/2” c/c • Includes inside/outside pulls, side/face mount strikes, screws Sliding Glass Door Handle Cwip # U/M Cwip # Finish U/M Cwip # Finish U/M 14959 Each 22625 Aluminum Each 37136 Black Each Surface Mount Patio Door Handle Patio Door Handle Chrome Finish Cwip # U/M 27104 Each Metal body with wood handle Cwip # U/M 24362 Each Sliding Door Handle Set Aluminum finish with wood handle. Less lock. Keeper and hardware included. Patio Door Handle White Finish Patio Door Handle White Finish Cwip # U/M Cwip # U/M 34157 Each 30341 Each 413 Cwip # U/M 35403 Kit Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 414 Patio Door Hardware (Continued) www.cwip.com Sliding Patio Door Handle Set Patio Door Handle Aluminum Finish Includes: (1) inside pull and thumb turn; (1) outside pull; installation hardware. Diecast handle set for mortise locks; non-handed outside pull can be keyed. Flush mount. 5” Cwip # Type U/M 38347 LH Each 38355 RH Each Cwip # U/M 23007 Each Flush Mount Sliding Door Lock Kit 6-5/8” 80047 Less Handle A A Each 5/8” B U/M U/M 15837 Each Cam (2 Required) Cwip # 35003 Each Cam (2 Required) Cwip # 27465 Each Use with 80047 lock Each Wood Handle (only) Cwip # Use with 80047 lock Includes (4) cams. 13777 U/M White Less lock, keeper/hardware included. Wood handle with a dull aluminum body. Wood handle; black body. Type Finish 37104 Sliding Door Lock Kit Patio Door Handle Set Cwip # Cwip # 5/8” Each B Inside handle with screws. 39⁄16” Surface Mount Latch Set W&F Patio Door Latch Round Face Patio Screen Door Latch Kit Cwip # U/M Cwip # U/M Cwip # U/M 23695 Each 22854 Each 14878 Each A Patio Door Deadbolt Lock 30457 Finish U/M Brass Each $ BEST VALUE Crossly Patio Screen Door Guides C Locks patio door against forced entry or exit. Contains: 1 keyed locking unit; 3 keepers; 2 keys; installation screws. Cwip # B ECO-FRIENDLY Cwip # Type U/M A 16942 Nylon Top Guide Each B 16893 Plastic Top Guide Each C 16787 Bottom Guide Each Patio Door Hardware www.cwip.com 23⁄4” With key lock Cwip # U/M Cwip # U/M 27924 Each 23177 Each Cwip # U/M 13629 Each 23⁄4” 13⁄4” Patio Door Cylinder Lock Crossly Patio Door Keeper Patio Door Cylinder Lock Cwip # Finish U/M Cwip # U/M Cwip # U/M 23631 Chrome Each 27511 Each 24092 Each Sliding Glass Door Roller Screen Door Roller Screen Door Roller Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M 24720 Steel Each 37852 Nylon Each 25574 Nylon Each Adjustable Screen Door Roller Screen Door Roller Cwip # Wheel U/M 14403 Nylon Each Spring Tension Screen Door Roller Cwip # Wheel U/M Cwip # Wheel U/M 15116 Nylon Each 16953 Nylon Each 5/8” 7/8” 1” 9/32” Wide Screen Door Roller 5/16” Groove Plastic Screen Door Roller With tempered spring Spring Tension Screen Door Roller Adjustable wheel with center groove Screen Door Roller Assembly Mounting Holes: 1-11/16” Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M 23785 Nylon Each 15765 Nylon Each 16219 Steel Each 33626 Steel Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Patio Screen Door Keeper Chrome Crossly Patio Door Lock Assembly Patio Door Keeper Chrome 415 HARDWARE 416 Screen Door Rollers (Continued) & Patio Door Rollers (by Wheel Dia.) 27/32” Roller www.cwip.com 1-1/8” Rollers Flat 1-1/8” Glass Door Roller Assembly Glass Door Roller Assembly Sliding Glass Door Roller Sliding Glass Door Roller Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M 31194 Steel Each 29990 Steel Each 34382 Steel Each 30499 Steel Each 1-1/4” Rollers 23⁄16” Glass Door Roller Assembly Glass Door Roller Assembly Glass Door Roller Assembly Glass Door Roller Assembly Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M 21133 Steel Each 28348 Steel Each 28758 Steel Each 23593 Steel Each Glass Door Roller Assembly Glass Door Roller Assembly Glass Door Roller Assembly Glass Door Roller Assembly Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M 35729 Nylon Each 29264 Steel Each 35155 Steel Each 22730 Steel Each Glass Door Roller Assembly Glass Door Roller Assembly Tandem Roller Assembly Extruded Roller Assembly Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M 26745 Steel Each 32632 Steel Each 35605 Steel Each 33599 Steel Each $ BEST VALUE ECO-FRIENDLY Patio Door Hardware 1-1/2” Rollers Glass Door Roller Assembly Glass Door Roller Assembly Glass Door Roller Assembly Glass Door Roller Assembly Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M Cwip # Wheel U/M 39623 Steel Each 29895 Steel Each 11905 Steel Each 30383 Steel Each Roller Assemblies Glass Door Roller Assembly Cwip # Wheel U/M 32408 Steel Each Type Cwip # A Size B Size 19815 25/32” 1-7/16” 13/16” 5/16” Nylon Each 38179 7/8” 1-3/8” 5/16” D Size 13/16” E Size Steel U/M Each Sliding Patio & Shower Door Bottom Rollers Patio Door Roller Cwip # “A” Size Type U/M 81702 1-1/2” Steel Each 81703 1-1/4” Nylon Each For Air Control brand. 1-1/32” Dia.; 1/4” hole; 1/4” wide; 1/4” hub. Cwip # U/M 23627 Bag/4 Oval Flat 1/4” Shower Door Rollers 3/16” Replacement Patio Door Track Stainless Steel Ball bearing construction, nylon wheel, 1/4” thick. 7/16” Hub diameter. Extends from back 1/8”. Center hole 8-32 threaded. Cwip # Size Type U/M Nylon Bottom Guide For Shower Doors Nylon bottom guide for sliding tub enclosure doors; fits 1/2" thick door rails. Cwip # Size U/M 81701 7/8” Dia. Oval Each Cwip # U/M 26989 8’ Long Cs/10 17761 3/4” Dia. Flat Each 39472 Each Continued » Window Hardware Sash Locks Sash Lock Bright Brass Sweep Height: 5/8”. Cwip # U/M 25250 Each 417 HARDWARE 1-1/4” Rollers www.cwip.com Sash Lock Brass Plated Cwip # U/M 12533 Bg/10 Vertical-horizontal camming action lifts sash; creates a snug non-rattling seal. • Strike: 5/8” x 2- 5/8” • Base: 15/16” x 2-5/8” Cwip # Finish U/M 14835 Bright Brass Each 14719 Each Aluminum Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Window Security Bars & Hardware (Continued) HARDWARE 418 www.cwip.com Burglar Bar Window Guards Locking Channel • • • • Mounts inside for top security Solid steel bars Swings in for quick exit Off white finish Cwip # 4-Bar Locking Channel 6-Bar Locking Channel Locking pin for burglar bars: Cwip # 31410 8-Bar Locking Channel Latch For Single Hung Windows Stanley Latches Sweep Height: 1/2” Cwip # 16069 24484 Type Sweep Height: 19/32” U/M Right Hand Each Left Hand Each 1130 Series U/M 33431 Each 33519 Each 37573 Each Cwip # No./Bars Size U/M 31406 4 14” H x 24 42” W Each 35922 5 18” H x 24 42” W Each 33356 6 (Long) 21” H x 42 58” W Each 31298 6 22” H x 58 76” W Each 31404 8 30” H x 24 42” W Each Sweep Lock White/Bronze Cwip # U/M Cwip # U/M 18154 Each 30419 Each Aluminum Sliding Lock Cwip # Type U/M 31219 Lock Only Each 33557 Lock & Keeper Each Plastic Sliding Latch For horizontal or double hung sliding windows. Black Sweep Lock & Keeper Nylon Sliding Latch Cwip # U/M Cwip # U/M Cwip # U/M 15178 Each 24531 Each 24828 Each 38836 Bx/100 1/2” Dia. Sliding Roller Assembly Window Control Smooth operation, for use in new or old doublehung windows. Controls windows when sash cord is broken. Adjustable white nylon housing. 1/2" Diameter flat edge steel roller. Sliding Window Corner Insert 8 #5-40 x 5/16” Phillips machine screws. Metal Horizontal Sliding Window Roller With nylon roller. Cwip # U/M Cwip # U/M Cwip # U/M Cwip # U/M 38003 Pair 36360 Each 28968 Card/4 23776 Each 9/16” Dia. $ Metal Horizontal Sliding Window Rollers 3/8” Dia. Metal Window Roller Cwip # Type U/M 23141 Nylon Roller Each 25950 Metal Roller Each BEST VALUE ECO-FRIENDLY Cwip # Type U/M 39971 Nylon Roller Each Window Security Hardware www.cwip.com HARDWARE 9/16” 2-5/8” Casement Locking Handle Aluminum Casement Handle Bronze Metal Crank Handle Casement Handle - Bronze Cwip # Type U/M Cwip # Type U/M Cwip # Finish U/M Cwip # Type U/M 22737 LH Each 35291 LH Each 16009 Bronze Each 35395 LH or RH Each 22736 RH Each 35307 RH Each 39048 White Each Casement Window Operators With Crank Handle Cwip # Finish Type U/M 23294 Bronze Left Hand Each 23292 Bronze Right Hand Each Casement Window Operators With Crank Handle 8” or 9” Cwip # Finish Type U/M 8” Left Hand Each 8” Right Hand Each 9” Left Hand Each 16440 9” Right Hand Each 39831 9” Left Hand Each 9” Right Hand Each 14023 13886 14024 39783 Bronze White Teardrop Casement Operators With Crank Handle Cwip # Finish Size U/M 35702 Bronze LH - 9” Arm Each 35710 Bronze RH - 9” Arm Each Metal Casement Window Replacement Tracks Mill Aluminum Finish Universal Window Operator Kit • Two tracks with mounting screws • Universal application For jalousie windows or doors Cwip # U/M 23847 Each White Snap-in Vinyl Glazing Bead 419 White Snap-in Vinyl Glazing Bead Cwip # U/M 31365 Each Silverline Snap-in Vinyl Glazing Bead Cwip # Size U/M Cwip # Size U/M Cwip # Size U/M 26632 6’ Long Each 32713 6’ Long Each 37206 6’ Long Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 420 Window Channel Balances www.cwip.com Ordering Information 1. Measure metal channel length (without ends). 2. Check stamped number on channel (19A, 22B, etc.). 3. Select corresponding part # from “Stamped No.” column. 4. To ID top/bottom ends, refer to Styles “A” thru “G”. STYLE A GUIDES WINDOW BALANCE Cwip # “A” Channel Len. Stamped No. or Letter 30037 24” 2310 or 23A STYLE B GUIDES WINDOW BALANCE 9/16” Top Guide Bottom Guide Style A Cwip # “A” Channel Length Stamped No. or Letter Cwip # “A” Channel Length Stamped No. or Letter 26986 29060 32171 27756 26987 39917 37988 17” 19” 20” 23” 23” 23” 23” 1610 or 16A 1820 or 18B 1930 or 19C 2210 or 22A 2220 or 22B 2230 2240 or 22D 27117 24” 2320 or 23B 30545 25” 2420 or 24B 29077 26” 2520 or 25B 30250 27” 2640 or 26D 29063 29” 2830 or 28C 37308 35” 3430 or 34C STYLE C GUIDES WINDOW BALANCE Style B Cwip # “A” Channel Len. Stamped No. or Letter 29183 25” 2420 or 24B 35589 31” 3030 or 30C STYLE D GUIDES WINDOW BALANCE “A” Channel Stamped Cwip # Length No. or Letter Style C Style D Cwip # “A” Channel Length Stamped No. or Letter 26198 16” 1540 or 15D 32161 26” 2530 or 25C 25764 17” 1610 or 16A 39162 27” 2640 or 26D 30272 21” 2010 26248 28” 2730 or 27C 30965 22” 2120 or 21B 26199 28” 2740 or 27D 29237 22” 2130 or 21C 32186 29” 2820 or 28B 33636 23” - 30976 30” 2930 or 29C 26173 24” 2320 or 23B 32365 32” 3140 or 31D 32185 24” 2330 or 23C 29152 34” 3330 or 33C 25709 24” 2340 or 23D 33461 37” 3620 or 36B STYLE G GUIDES WINDOW BALANCE Style G Cwip # “A” Channel Length Stamped No. or Letter Cwip # “A” Channel Length Stamped No. or Letter 27535 17” 1610 or 16A 26103 24” 2310 or 23A 26048 18” 1710 or 17A 26925 25” 2410 or 24A 32387 20” 1920 or 19B 27029 25” 2420 or 24B 28068 21” 2010 or 20A 35891 29” 2810 or 28A 27881 22” 2110 or 21A 35460 38” 3710 or 37A 27634 23” 2210 or 22A 38212 38” 3720 or 37B Style H STYLE H GUIDES WINDOW BALANCE Style I Window Balance Screw For 74, 75, 80 Series Cwip # U/M 33340 Each $ BEST VALUE ECO-FRIENDLY Cwip # “A” Channel Len. Stamped No. or Letter 30334 23” 2210 or 22A STYLE I GUIDES WINDOW BALANCE Cwip # “A” Channel Length Stamped No. or Letter Cwip # “A” Channel Length Stamped No. or Letter 38091 16” 1510 or 15A 30120 22” 2110 or 21A 34134 20” 1910 or 19A 34124 24” 2310 or 23A 33301 20” 1920 or 19B 38794 26” 2510 or 25A Assorted Window Balance Accessories www.cwip.com A 60 Series Top Sash Guide A Cwip # 32522 /4” Ea. Cwip # 26691 /16” Ea. 1 27328 Each 28727 Each 38634 Cwip # Cwip # 39934 Each 72 Series Sash Clip 64 Series Top Sash Guide 60 Series Sash Guide Cwip # Cwip # 5 Each 60 Series Top Sash Guide 60 Series Top - Capitol Cwip # 36220 Each Cwip # 30269 Each 60 Series 60 Series Bottom Capitol Top Sash Guide Cwip # 39942 Each Cwip # 30257 Each 70 Series Window Tube Balances Cwip # Length Tube - Rod 39634 19” 39642 Length Tube - Rod Red Bearing Cwip # 193/4” 70-N19SR 39666 26” 263/4” 70-N26SR 20” 20 /4” 70-N20SR 39682 28” 283/4” 70-N28SR 33674 21” 213/4” 70-N21SR 39690 29” 293/4” 70-N29SR 39650 22” 223/4” 70-N22SR 39698 30” 303/4” 70-N30SR 34034 24” 24 /4” 70-N24SR 3 3 70 Series: White, red and blue bearings are for sashes weighing up to 30 lbs and black bearings for sashes weighing up to 40 lbs. Generally, red nylon bearings can be used in place of white bearings in repair situations. Red Bearing 70 Series Accessories Balance Shoe Balance Shoe Balance Shoe Balance Shoe Cwip # Wgt.lb. U/M Cwip # Wgt.lb. U/M Cwip # Wgt.lb. U/M Cwip # Wgt.lb. U/M 39785 .04 Each 39746 .04 Each 34032 .04 Each 39762 .04 Each Metal Bracket Crossly Sash Clip Cwip # Wgt.lb. U/M 33342 .04 Each Metal Bracket Sash Clip Cwip # Wgt.lb. U/M Cwip # Wgt.lb. U/M Cwip # Wgt.lb. U/M 39778 .04 Each 39219 .04 Each 38986 .04 Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 60 Series 1/4” Take-Out Clip 421 Window Tube Balances www.cwip.com HARDWARE 422 76 Series Tube Balances Cwip # Length Tube - Rod Red Bearing 39665 22” 225/8” 76-SMS22R 39681 24” 245/8” 76-SMS24R Cwip # Length Tube - Rod Red Bearing 38860 35” 76-SMS35R 355/8” 76 Series: White, red and blue bearings are for sashes weighing up to 22 lbs and green bearings for sashes weighing up to 26 lbs. Generally, red nylon bearings can be used in repair situations, however other color bearing balances are available. 76 Series Accessories - Metal Sash Clips White Hinge Leaf Assemblies Cwip # Type U/M 39761 With Metal Bracket Each 39769 Less Metal Bracket Each 83 Series Window Tube Balances Ordering Information • Measure the length of the metal tube only (not including the nylon bearing or rod). • Determine diameter of the tube and refer to picture for your size, based on the metal tube length and diameter of tube and style of balance rod. 83 Series Tube Balances Cwip # Tube Len. Red Bearing 39458 16” 83-16R 39489 20” 83-20R 39505 22” 83-22R 39537 27” 83-27R 34891 28” 83-28R 39577 32” 83-32R Note: Tube diameter measuring 9/16” - is 5/8” in the Trade. (Order window balance accessories separately.) 83 Series: White, red and blue bearings are for sashes weighing up to 22 lbs and green bearings are for sashes weighing up to 26 lbs. 83 Series Accessories Pivot Lock Shoe New Style Black Pivot Latch Tilt Window Slide Latches Cwip # U/M Cwip # U/M Cwip # U/M 39585 Each 34133 Each 35524 Each $ BEST VALUE ECO-FRIENDLY Window Tube Balances www.cwip.com 85 Series Tube Balances Cwip # Tube Len. 39393 35964 39409 16” 17” 18” Red Bearing Cwip # Tube Len. Red Bearing 85-16R 30049 24” 85-24R 85-17R 32170 25” 85-25R 31337 27” 85-27R 39449 28” 85-28R 35498 29” 85-29R 30004 30” 85-30R 39465 31” 85-31R 33642 32” 85-32R 39473 34” 85-34R 85-18R 34368 19” 85-19R 39417 20” 85-20R 39425 21” 85-21R 32169 22” 85-22R 39433 23” 85-23R Ordering Information • Measure the length of the metal tube only (not including the nylon bearing or rod). • Determine diameter of the tube and refer to picture for your size, based on the metal tube length and diameter of tube and style of balance rod. Note: Tube diameter measuring 9/16” - is 5/8” in the trade. Order window balance accessories separately. Indicate if you wish these to be attached at the time you place your order. 85 Series: White, red and blue bearings are for sashes weighing up to 30 lbs and black bearings are for sashes weighing up to 40 lbs. Generally, red nylon bearings can be used in place of white bearings in repair situations. 85 Series Accessories Pivot Lock Shoe Blue Cam Pivot Lock Shoe White Cam Pivot Lock Shoe Black Cam Pivot Lock Shoe Tan Cam Cam Opening 5/16” x 3/16” Cam Opening 9/32” x 3/16” Cam Opening 3/8” x 3/16” Cam Opening 3/8” x 3/16” Cwip # U/M Cwip # U/M Cwip # U/M Cwip # U/M 39481 Each 39202 Each 39226 Each 39218 Each Pivot Lock Shoe White Cam Black Tilt Latch Assembly Cam Opening 5/16” x 3/16” Cwip # U/M 39242 Each Cwip # Type U/M 38876 LH Each 38884 RH Each LH Shown Balance Tension Tool Cwip # U/M 39258 Each White Tilt Latch Assembly - Plastic Cwip # U/M 35021 Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 9/16" But Considered 5/8" in the Trade 423 Custom Window Screens HARDWARE 424 www.cwip.com Frame Finishes: Almond, Beige, Black, Bronze, Mill and White Gray Fiberglass Mesh Charcoal Fiberglass Mesh Charcoal Aluminum Mesh Bright Aluminum Mesh Flat Tension Spring Insert Corner Spring Cwip # 23914 Each Cwip # 22650 Each 3/8” Screen Clip Cwip # 16302 1” Vinyl Lift Bx/100 Cwip # 18973 Each 3/16” Inside Plastic Corners A A Corner Key Plastic Clip B For storm door insert panels. Cwip # A Size U/M 23459 7/16” Each Cwip # B U/M 7/16” 3/4” Each 83061 3/8” 3/4” Each 83060 5/16” 3/4” Each 83063 1/4” 3/4” Each Clip & Knurled Screw Includes: Cap, spring, shaft. 22744 A 83062 29149 Each Pin Plunger Cwip # Cwip # Set Storm Door Clip/Thumb Screw Extruded aluminum clip fits most screen or storm door panels. Cwip # 15833 Card/8 • Aluminum tapped clip • 8/32 x 5/16 Thumb screw • Offset range: 1/8” to 1/4” 5/32” Slidebolt Spring Cwip # 30876 $ Cwip # Finish U/M U/M 21179 Mill Box/100 Card/8 13887 White Bag/8 BEST VALUE ECO-FRIENDLY White Window Screen Clip Cwip # 23919 Each Screen Component Parts www.cwip.com /16” Window Screen Frames 5 Cwip # Finish Size U/M Cwip # Finish Size U/M 23633 Bronze 1/4” Len/12’6” 13929 Aluminum 5/16” Len/12’6” 83178 Mill 1/4” Len/12’6” 22664 Bronze 5/16” Len/12’6” 83179 White 1/4” Len/12’6” 24648 White 5/16” Len/12’6” 83231 Beige 5/16” Len/12’6” Use: 9/64” Spline - Cwip # 38956 Use: 9/64” Spline - Cwip # 38956 /4” Inside Corner Angles 1 /16” Inside Corner Angles 5 Cwip # Finish U/M Cwip # 19113 Aluminum Each 14112 Finish U/M Aluminum Each /16” Outside Corner Keys 5 /4” Outside Corner Keys 1 Plastic Plastic Cwip # Finish U/M Finish U/M 31169 Mill Each 36649 Mill Each 38834 Almond Each 36625 White Each 30823 White Each 38769 Bronze Each 37200 Bronze Each Cwip # /8” Window Screen Frames 3 Cwip # Finish Size U/M 83055 Bronze 3/8” Len/12’6” 83056 Aluminum 3/8” Len/12’6” 83054 White 3/8” Len/12’6” 83232 Beige 3/8” Len/12’6” 3/8” /8” Outside Corner Keys Plastic 3 Additional screen frame colors and sizes are available. Contact your Sales Representative to order. Cwip # Finish U/M 38780 Mill Each 36637 Almond Each 36673 White Each 36692 Bronze Each /16” Window Screen Frames 7 7/16” Cwip # Finish Size U/M 83047 Bronze 3/8” Len/12’6” 83053 Aluminum 3/8” Len/12’6” 83051 White 3/8” Len/12’6” 83177 Beige 7/16” Len/12’6” 3/8” /8” Window Screen Frames Flanged 3 /16” Outside Corner Keys Plastic 7 Cwip # Finish Size U/M Cwip # Finish U/M 29940 White 3/8” Len/12’6” 38804 Mill Each 83812 Beige 3/8” Len/12’6” 38757 Almond Each 83185 Mill 3/8” Len/12’6” 38825 White Each 83243 Bronze 3/8” Len/12’6” 36603 Bronze Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE /4” Window Screen Frames 1 425 426 HARDWARE Window Screens and Screen Doors Made To Your Specifications Fiberglass Screening Standard Window Casement Screens Cwip # • Aluminum Frame • Mill Finish • 18” x 16” Mesh • Fiberglass Screening • 7/16” Thickness Finish U/M 00268 16-5/8” x 23-3/4” Each 18206 16-5/8” x 36” Each 11619 16-5/8” x 48” Each Aluminum Screening 00336 16-5/8” x 36” Each 18913 16-5/8” x 48” Each Contact Your Sales Representative or Customer Service Department to Order! Custom Replacement Patio Screen Sliding Doors Adjustable Multi-Fit Screen Doors Expander doors (allows 1” of adjustable height per expander with max. (2) expanders). With top and bottom moveable flanges, total height adjustment is 2”. Custom made on our premises. Contact your sales rep for assistance on measuring to insure accuracy, and selection of frame color, screen wire and hardware. Frame Colors Frame Colors • Mill Finish, White, Bronze, Beige • Mill Finish, White, Bronze and Almond Screen Materials Screen Materials • • • • • • • • Gray Fiberglass Charcoal Fiberglass Charcoal Aluminum Bright Aluminum Gray Fiberglass Charcoal Fiberglass Silver Gray Aluminum Charcoal Aluminum (No minimum order required for custom sliding doors.) Cwip # Color 09253 Mill 36” x 78 80” 09301 Mill 36” x 78 80” Charcoal Each 09029 White 36” x 78 80” WxH 09246 Bronze 36” x 78 Screen U/M Gray Each Gray Each 80” Charcoal Each 09229 Mill 48” x 78 80” 09254 Mill 48” x 78 80” Charcoal Each Gray Each A B (Actual size.) Gray Spline Screen Spline Tools Cwip # Type U/M Wgt.lb. U/M 38948 1/8” .120 2.0 Rl/250’ 38956 9/64” .140 2.0 Rl/250’ Cwip # Size 38412 5/32” .156 1.7 Rl/250’ A 15339 Wood Handle; Nylon Roller Each 38964 11/64” .165 2.7 Rl/250’ B 24548 Wood Handle; Metal Rollers Each 38972 13/64” .203 2.7 Rl/250’ 15397 Wood Handle; Nylon Rollers Each 38979 15/64” .230 4.6 Rl/250’ 39294 Wood Handle; Metal Rollers Each 38987 4.6 Rl/250’ $ $ BEST VALUE ECO-FRIENDLY 1/4” .250 Screen Accessories & Weatherstripping www.cwip.com HARDWARE Bright-Kote® Gray Alclad Aluminum Insect Screening 18 x 16 Mesh; streak free; lays flat Woven from permanent glass yarn, coated with a protective vinyl to ensure lasting color and flexibility. Noncombustible and will not rust, corrode or stain. Fiberglass Insect Screening Gray Charcoal Cwip # Size U/M Cwip # Size U/M 25898 30” x 100’ Roll 14407 24” x 100’ Roll 14466 36” x 100’ Roll 14099 32” x 100’ Roll 25699 42” x 100’ Roll 14465 36” x 100’ Roll 11620 48” x 100’ Roll 14176 42” x 100’ Roll 19621 60” x 100’ Roll 13975 48” x 100’ Roll 83550 72” x 100’ Roll 13976 21297 60” x 100’ Size U/M 19982 24” x 100’ Roll 19617 30” x 100’ Roll 14263 32” x 100’ Roll 13973 36” x 100’ Roll 14223 48” x 100’ Roll 23488 60” x 100’ Roll Charcoal Aluminum Insect Screening Roll 72” x 100’ Cwip # Roll Cwip # Size U/M 34316 24” x 100’ Roll 83516 30” x 100’ Roll 83596 48” x 100’ Roll 34019 60” x 100’ Roll 48” Screen Door Expander - Aluminum Vinyl Screen Door Bug Strip Expands height of door up to 1” Vinyl flap can be hand peeled Cwip # U/M Cwip # Size U/M 24060 Each 23034 1-1/2” Wide Rl/280’ Energy Saving Weatherstripping Mortite Window Weatherstrip Closed Cell Vinyl Foam Tape 3/4” Felt Weatherstrip • Self-stick • Gray Self-stick, pliable 3/16” caulking cord. Cwip # Color U/M Cwip # Color U/M Cwip # Size U/M 17357 Gray Roll/90’ 17588 Gray Roll/25’ 16770 3/8” W x 3/16” Roll/17’ 20592 3/8” W x 1/4” Roll/17’ Gray Tubular Door/Window Weatherstrip Sponge Weatherstrip Door/Window Foam Tape Closed-cell sponge material Open-cell plastic foam tape Cwip # Size U/M 1/2” W x 5/32” Roll/50’ 1/2” W x 5/16” Roll/50’ Cwip # Size U/M 16744 24355 1/2” W x 1/4” Roll/17’ 16613 Cwip # Color 17395 White 3 Size 17359 Charcoal 1 17358 White 3 427 U/M ⁄8” W x 1⁄4” Roll/17’ ⁄2” W x 3⁄8” Roll/17’ ⁄4” W x 1⁄4” Roll/17’ Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 428 Weatherstripping & Door Thresholds www.cwip.com Energy Saving Weatherstripping Shrink Fit Clear Window Insulator Kits Bronze Weatherstrip See-through film and tape. Eliminates drafts and frost build-up, and creates dead air space to increase insulation. • For steel entry doors • Urethane long reach Cwip # Size U/M 34780 6’8” Each Cwip # Type Size U/M 34168 Patio Door 84” x 110” Each 34297 Pkg/9 Window 42” x 62” /4” 3 Aluminum Door Jamb Weatherstrip Wood/Foam Jamb-up Door Weatherstrip Nail fastened, fits wood frame doors. Fasteners included. Includes: (1) Piece 36” Iong; (2) pieces 84” long. White Vinyl Door Weatherstrip Includes: pre-punched, nails, one 7’ end and one piece 3’. Cwip # Size U/M Cwip # U/M Cwip # U/M 17332 36” x 84” Set/17’ 13868 Kit 23708 Each Wood & Vinyl Clad Foam Door Set w/Stop Can be nailed around wood framed doors, installed on the door stop or used to replace the door stop. Paintable and stainable. Includes: (2) 7’ pieces and (1) 3’ piece. Cwip # 36544 Size U/M 1-1/2” x 17’ Set Magnetic Weatherstrip Set For Steel Doors Fits into existing kerf around the door frame. Seals against drafts, dirt and moisture. Includes: (1) 6’ 8” magnetic weatherstrip (1) 3’ magnetic weatherstrip (1) 6’ 8” compression weatherstrip Cwip # Color U/M 38939 White Each Drip Cap Door Bottoms Screw-On Thermoplastic Door Bottoms An aluminum strip diverts rain away, with a vinyl insert for weathersealing. Used in combination with saddle thresholds. Silver color. For metal doors. Sealing fins and bulb stay flexible. Cwip # Size U/M 36552 1-3/4” x 36”L Each Cwip # 36560 36568 Seals both edge and bottom including a rain drip cap. Size U/M 24197 1-3/8” x 36”L Set ECO-FRIENDLY 1-3/8” x 36”L Each 1-3/4” x 36”L Each Gray Vinyl Insert Cwip # BEST VALUE U/M U-Shape Combination Threshold/Door Bottom $ Size L-Shape Replacement vinyl insert for Frost King aluminum thresholds Cwip # Size U/M 31112 7/8” x 36”L Set Door Bottoms & Sweeps www.cwip.com HARDWARE 4-Piece Weatherstrip Kits • Aluminum • Brush Type Vinyl Insert Threshold With vinyl feet. Insert adds 1/4” to height. Cwip # Size U/M 81043 31/8”W x 1/2”H x 36”L Each Cwip # # of Pieces, Size U/M 25477 (2) - 3’; (2) - 6’8” Kit 35072 (2) - 3’; (2) - 8’0” Kit U-Channel Door Bottom With rain drip, air seal vinyl insert and screws. Satin finish. Adjustable height. Door Sweeps 25528 5/8” x 36” Each Cwip # W x L U/M 37069 1-3/4” x 36” Each 37462 13⁄4” x 361⁄2” Set Aluminum/Vinyl Door Sweep Aluminum/Vinyl Door Sweeps Gray Vinyl Door Sweep Slotted holes for fast height adjustment. Extruded aluminum strip with vinyl insert. Flexible; self-adhesive. Cwip # Size U/M Cwip # Size U/M Cwip # Size U/M 14290 11⁄2” x 36”L Each 16658 2-3/8” x 36”L Each 23282 36” Long Each Thresholds & Binder Bars Carpet Binder Bars Cwip # White Marble Thresholds Finish U/M 13744 “A” Hammered Aluminum 3’ 29062 Hammered Gold 3’ 1-1/2” Cwip # W xD xL U/M Hammered Aluminum 6’ 19659 2” x 3/4” x 24” Each 21606 Hammered Aluminum 12’ 26231 2” x 3/4” x 28” Each 16326 Hammered Gold 12’ Each 28004 Hammered Gold 3’ Each 28185 Hammered Gold 6’ Each 28911 39214 36716 27140 24061 2” x 3/4” x 36” 3” x 3/4” x 24” 3” x 3/4” x 28” 27334 3” x 3/4” x 36” Each 39607 4” x 5/8” x 24” Each 39616 4” x 5/8” x 28” Each 39624 4” x 5/8” x 36” Each 21505 2” Hammered Aluminum 6’ Hammered Aluminum 12’ Gold Carpet Guard With Pins Cwip # Size U/M 25717 12’ Long Each Oak Wood Threshold Cwip # W xD xL U/M 21618 31⁄2” x 3⁄4” x 36” Each 429 1-1/4” Carpet Bar Nails Cwip # Finish Approx # per Lb. U/M 16411 Aluminum 410 Bag/1 lb. 15645 Gold 410 Bag/1 lb. Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Hinges www.cwip.com HARDWARE 430 Full Mortise Butt Hinge 1/4” Radius Corners For hollow core/lightweight doors Cwip # Finish Size U/M 24087 Satin Brass 31⁄2” x 31⁄2” Pair 5/8” Radius Corners Butt Hinge Cwip # Finish Size U/M 36852 Satin Brass 3-1/2” x 3-1/2” Pair Each 35971 Satin Brass 4” x 4” 36047 Satin Nickel 3-1/2” x 3-1/2” Pair 37848 Satin Nickel 3-1/2” x 3-1/2” Each 38919 Satin Chrome 3-1/2” x 3-1/2” Box/3 5/8” Radius Corners Butt Hinge Masonite hole pattern Cwip # Finish Size U/M 36039 Satin Nickel 4” x 4” Pair Square Butt Hinges A A B Cwip # Finish Size U/M 19502 Brass Plated 2” x 2” Bx/12 Pair 20119 Brass Plated 3” x 3” Pair 21496 Satin Brass 3.5” x 3.5” Pair Satin Chrome 3.5” x 3.5” 39895 $ 30097 B Pair Each 17337 Brass Plated 4” x 4” Pair 17987 Prime Coat Gray 4.5” x 4.5” Bx/3 Pair 4” x 4” Each Masonite Hole Pattern 36368 Satin Nickel Bommer Single Action Spring Hinge - Primed Bommer Single Action Spring Hinge Full mortise, non-handed, non-template. • Full mortise • Non-handed Cwip # Size Wood Screw U/M 14936 6” (10) 10 x 1" Pair Bommer Single Action Spring Hinge - Primed Square Corners Cwip # Size Finish Wood Screw U/M 14935 4” x 4” Black (16)#10 x 3/4" Pair 14873 4.5” x 4.5” Prime Coat (8)#12 x 11/4" Pair $ 39078 4.5” x 4.5” Prime Coat (16)#12 x 11/2" Pair Full mortise and non-handed. 1/4” Radius Corners Cwip # Size Wood Screw U/M 15050 31⁄2” x 31⁄2” (12) #10 x 3⁄4" Pair Spring Hinge Tension Pin Fits Cwip #: 20131 $ BEST VALUE ECO-FRIENDLY Spring Hinge Tension Pin Fits Cwip #’s: 14935, 14936, 14873 & 15050 Cwip # U/M Cwip # U/M 21623 Each 39923 Each Hinges www.cwip.com Template and button tip Cwip # Size U/M 20131 6” Pair Hinge For Bi-Fold Wood Doors • Full mortise • Steel with steel pin Square Corners Cwip # Size U/M 37101 3-1/2” x 3-1/2” Pair Full Surface Reinforcing Pivot Hinge Bommer Door Springs Black Finish Size U/M Cwip # Type U/M Cwip # Finish U/M 16682 13-7/16” Each 24383 Left Hand Each 14044 Brass Set 16637 14-5/8” Each 24384 Right Hand Each Light Tee Hinge Zinc Plated Heavy-Duty Tee Hinge Zinc Plated Each • Fits all door butt hinge pins • Keeps all doors closed • Rubber sleeves on wing For doors 3/4” to 1-3/8” thick Cwip # U/M 30426 Wing Door Closer Gravity Pivot Hinge • 3/4” to center line pin • 4-1/2” butt • Steel heads • Adjustable spring tension Cwip # Cwip # O.L. U/M 37963 5-1/4” Each Heavy Strap Hinge Zinc Plated Cwip # Size U/M Cwip # Size U/M Cwip # Size U/M 12527 3” Bx/12 Pair 11923 6” Pair 11144 6” Each 11678 4” Bx/12 Pair 11922 8” Pair Self-Closing Hinge Flush Self-Closing Hinge Semi-concealed; 3/8” inset design. Cwip # Finish U/M Cwip # Finish U/M 37226 Antique Brass Pair 14981 Chrome Pair 39110 Chrome Pair Pair 39094 Polished Brass Pair Pair 39118 White Pair Pair 38753 Oil-Rubbed Bronze Pair White Pair 38748 Satin Nickel Pair 38746 Antique Brass Pair 36606 Oil-Rubbed Bronze Pair 36609 Brass Pair 22751 $ Antique Copper 39126 36023 Satin Nickel 36618 Self-Closing Hinge Overlay - Modern Design Self-Closing Hinge Reverse Bevel Cwip # Finish U/M 23243 Antique English Pair 30°, Face mount. 23242 Burnished Brass Pair Polished Chrome Pair White Pair Cwip # Finish U/M 14601 36283 Chrome Pair 34771 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Five Knuckle Spring Hinge Prime Coat Single Action Spring Hinge Prime Coat 431 Hinges (Continued) & Hasps HARDWARE 432 www.cwip.com Semi-Concealed Cabinet Hinge Self-Closing Hinges Variable Overlay Cwip # Finish U/M 35007 Antique English Pair Without inset. U/M Chrome Pair For Marsh Cabinets. Finish U/M U/M $ 30225 Burnished Brass Pair Burnished Brass Pair 39471 Burnished Brass Pair Antique Brass Pair Cwip # 39749 Finish 14994 Self-Closing Full Wrap Cabinet Hinge 1/4” Overlay Self-Closing Partial Wrap Cabinet Hinge 1/2” Overlay $ 15017 Cwip # Finish Cwip # Wrap Cabinet Hinge For Armstrong cabinets. 71282 Burnished Brass Each Concealed Hinges A 1-3/8” Bowl diameter; includes screws. B Euro Hinge 1-1/2” Overlay With premounted doweled screws. Hinge cup. Cwip # Finish U/M 36626 Nickel Each Cwip # Finish Material Type C.C. U/M A 38756 Nickel Zinc 170° Overlay 1-3/4” Each B 38758 Nickel Steel 105° Inset 1-3/4” Each 38760 Nickel Steel 105° Half Overlay 1-3/4” Each 38764 Nickel Steel 105° Full Overlay 1-3/4” Each 38774 Nickel Steel 105° Inset 2-1/16” Each 38777 Nickel Steel 105° Half Overlay 2-1/16” Each 38795 Nickel Steel 105° Full Overlay 2-1/16” Each C C Safety Hasp w/Fixed Staple Galvanized; zinc plated. Heavy Duty Hinge Hasp All Hardened Super-Security Hasp Galvanized, hardened staple and rust-resistant finish. Includes: carriage bolt, washers and nut. • Solid hardened steel 90° angle bar • Complete with screws Cwip # 20203 Size 4-1/4” Wgt.lb. Cwip # U/M 1.8 14599 Each Size 7-1/4” Master Lock Security Hasp Wrought steel ribbed for maximum strength. Pinless hinge for added security. Cadmium rustproofing. Extra-strong, rounded staple of hardened steel. Cwip # Size Wgt.lb. U/M 11358 4-1/2” .42 Each $ BEST VALUE ECO-FRIENDLY U/M Set Cwip # Size U/M 12160 2-1/2” Box/12 14034 3-1/2” Box/12 12033 4-1/2” Box/12 12529 6” Box/12 Master Lock Heavy Duty Security Hasp Cadmium rustproofing. Extra-strong, rounded staple of hardened alloy steel reinforced by hardened steel-locking plate. Cwip # Size Wgt.lb. U/M 12331 6” .83 Each Chains & Bolts www.cwip.com Covered Crash Door Chain • Extra heavy-duty • Designed for full-size exterior doors • Extra heavy duty • Ideal for full size exterior doors Cwip # Size U/M Cwip # Size U/M 18024 251/2” Long Each 16669 301/2” Long Each Brass Plated Heavy Duty Barrel Bolts Cwip # Size U/M 11806 3” Box/12 Brass Plated Barrel Bolts Extra Heavy - Zinc Plated Cwip # Size U/M 2” Box/10 2-1/2” Box/10 12276 4” Box/10 11680 19578 5” Box/10 37261 12390 6” Each Ives® Heavy Duty Security Surface Bolt Zinc Finish Strong tension spring holds bolt in position; 1-3/16” throw Padlock-able Barrel Bolt Heavy Square Spring Bolt - Black Includes surface and mortise strike and screws. Design permits use of padlock with up to 7/16” diameter shackle to secure bolt in locked position. Cwip # Size U/M 19202 5” Each Heavy Duty Door Guard Polished Brass Zinc diecast alloy. Lock ball prevents forced entry. Allows 4” max. opening Cwip # Finish U/M Cwip # Size U/M Cwip # Size U/M 34825 Polished Brass Each 22701 8” Each 12536 6” Each 36527 Satin Nickel Each 36705 Dull Chrome Each 36697 Antique Brass Each Notes Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Crash Stop Spring/Chain 433 Closet Door Tracks & Hardware www.cwip.com HARDWARE 434 Pivot Bi-Fold Hardware Sets • For 2 or 4-panel wood doors, 1” 1-3/8” thick • Steel tracks, baked enamel finish • With screws and instructions Contents: Cwip # Open Size U/M (1) Steel track w/2 ramp sockets (2) Top pivots (1) Four-door snubber (2) Roller guides (1) Door aligner set (2) Wood knobs (2) Bottom pivots (6) Surface mount non-mortise hinge (2) Jamb brackets 29413 3’ Set 22130 4’ Set 82401 6’ Set Wood Bi-Fold Door Tracks Only Cwip # Open Size U/M 32613 4’ Each 32614 5’ Each 32615 6’ Each Premdor Wood Bi-Fold Door 2-Panel Hardware Kit A 7-Piece kit includes: (with screws) (Track not included.) A - Top Pivots B - Bottom Pivot C - Jamb Bracket D - Door Knob E - Snugger F - Aligner E D F B C Cwip # U/M 32379 Kit Bi-Fold Door Corner Repair Bracket Bi-Fold Door Trim Molding designed to cover odd size opening gaps up to 2-1/4” Size U/M Cwip # Door Size U/M 24553 6’8” x 1” x 1-3/4” Each 39478 1-3/8” Pkg/2 Steel Bi-Fold Door Tracks Cwip # Type Wgt.lb. U/M 31264 5/8” - 2’ Track 2.2 Each 26037 5/8” - 3’ (2-Piece) 30 Set 25567 5/8” - 4’ (2-Piece) 4.2 Set $ Screws included Cwip # BEST VALUE Aluminum Bi-Fold Door Track Cwip # Type 32764 5/8” - 4’ Track ECO-FRIENDLY Wgt.lb. U/M 1.6 Each Door Bumper For Metal Bi-Fold Doors Cwip # Wgt.lb. U/M 27909 .04 Each By-Pass Door Hardware www.cwip.com For 2 by-pass doors 3/4” 1-3/8” thick (up to 60 pounds). Steel track, dual purpose hangers, and adjustable nylon floor guide. Vertical adjustment 3/8” and side mounting. Includes: (2) Deep offset hangers; (2) shallow offset hangers; (1) length steel track; (1) floor guide Front By-Pass Door Hanger 7/8” roller 7/8” roller Cwip # Offset U/M Cwip # Offset U/M 80235 1/2” Each 18225 1/4” Each HARDWARE By-Pass Sliding Door Hardware Set Back By-Pass Door Hanger Cwip # Open Size # of Doors Wgt.lb. U/M 22134 4’ (2) - 2’0” 3.0 Set Cwip # Offset Roller U/M 15905 5’ (2) - 2’6” 3.8 Set 38942 3/8” 3/4” Each 22131 6’ (2) - 3’0” 4.2 Set 38934 3/4” 3/4” Each 32832 8’ (2) - 4’0” 6.0 Set Door Hanger w/Screws 2-1/2” By-Pass Door Hangers 7/8” Roller Roller 3” Zinc plated; nylon rollers. Cwip # Type U/M 23082 Deep Offset Pair 23083 Shallow Offset Pair 1-3/8” Cwip # U/M Cwip # Offset U/M 18315 Each 22415 1/4” Each RH Shown Panel Jacket Hanger For Wood Doors RH Shown Bottom Hanger Pivot Adjuster Panel Jacket Hanger For Wood Doors Cwip # Wgt.lb. U/M Cwip # Wgt.lb. U/M 38513 .26 Set 38505 .26 Set By-Pass Adjustable Floor Guide Metal By-Pass Floor Guide w/Nylon Posts 3/4” to 1-3/8” thick doors. 3/4” to 1-3/8” thick doors Nylon By-Pass Floor Guide For 1-3/8” by-pass doors Cwip # U/M Cwip # U/M Cwip # U/M 23711 Each 26203 Each 29381 Each By-Pass Door Guide Set • 3/4” to 1-3/8” thick doors • Metal with nylon posts 1-1/8” 4-1/2” Sliding Door Guide • For 1-3/8” thick doors • Extra high guides for thick carpets • For 2 or 4 folding doors Cwip # U/M Cwip # H x W x D U/M 12398 Set 34942 3 ⁄4" x 23⁄4" x 3⁄4" Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 435 HARDWARE 436 Bi-Fold Door Hardware For Wood Doors www.cwip.com Roller Guide Wood Doors Top Guide Wheel Cwip # Bi-Fold Door Saver 11966 U/M Each Cwip # 22442 U/M Each Used to repair bifold pin holes when they split. Cwip # Door Width U/M 38398 1-1/8” Pkg/6 38406 1-3/8” Pkg/6 Top Guide Wheel Wood Doors Cwip # 24367 U/M Top Guide Cwip # 82284 Each U/M Each 1/4” 3/8” 1-1/2” Plastic Pivot Pin Cap 7/16” Top Pin Cwip # 36134 U/M Spring-Loaded Top Guide Each Cwip # 15007 U/M Cwip # 23887 U/M Each 3/8” Nylon Pin Cap Cwip # 81499 U/M Each Each 9/32” Plunger Pin For Wood Doors Spring Adjustable 0” 3/8” Cwip # 30151 U/M Each Plunger Pin For Wood Doors Plunger Pin For Wood Doors Cwip # 24351 U/M Spring Adjustable 0” 1/2” Each Cwip # 24778 U/M Each Plunger Pin For Wood Doors Spring Adjustable 0” 3/4” Cwip # 24779 Plunger Pin 27176 U/M Each Cwip # 23545 U/M Plunger Pin Plunger Pin Each Cwip # Cwip # 29567 U/M Each $ BEST VALUE 34875 U/M Top Pivot Pin Spring adjustable 0” 3/4”. Cwip # Each Plunger Pin Plunger Pin Cwip # U/M ECO-FRIENDLY 20437 U/M Each Each Cwip # 23774 U/M Each Plunger Pin Cwip # 34331 U/M Each Bi-Fold Door Hardware For Wood Doors Cwip # 17316 U/M 4-9/16” Pivot Pin Each Two-Way Snugger Guide 16191 U/M Each Cwip # Cwip # 13195 U/M Each 5/16” 2-7/16” Pivot Pin Spring Pin Spring Cwip # 16144 U/M Each Cwip # 7/16” Bottom Pivot/Jamb Bracket Cwip # 39931 U/M 31⁄2” Each 43⁄8” 23433 U/M Pivot Pin Spring Bg/10 Cwip # Cwip # 24103 U/M Each 20294 U/M Each 27739 16243 U/M Each Continued » Nylon Top/Bottom Guide Cap Cwip # Each Pivot Bracket For Wood Doors Assorted Bi-Fold Door Hardware Cwip # U/M Plunger Bracket For Wood Doors Cwip # Nylon Top/Bottom Guide Cap 23283 U/M Each Metal Closet Door Pivot Bracket Cwip # 12660 U/M Each Replacement Speed Nut Cwip # 22441 - Each Pivot Bracket Installs into top track Cwip # 36874 U/M Each Steel Top Pivot Bracket For 7/8” wide track system Cwip # Bi-Fold Door Hardware For Metal Doors Nylon Pivot Bracket For Metal Doors Cwip # 24418 U/M Each 26616 U/M U/M Each Continued » Metal Pivot Bracket Benchmark Cwip # 36639 Each Metal Pivot Bracket Nylon Pivot Bracket For Slimfold Metal Doors For Slimfold Metal Doors Cwip # 30316 U/M Each Cwip # 26908 U/M Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Each 437 HARDWARE Bottom Pivot Pin 4-7/16” www.cwip.com Bi-Fold Hardware For Metal Doors (Continued) www.cwip.com HARDWARE 438 Nylon Pivot Bracket For Metal Doors Peachtree Cwip # 37917 U/M Nylon Pivot Bracket For Metal Doors Each Retainer Clip For Slimfold Metal Doors Cwip # Size U/M 22441 5/16” Each Cwip # 20477 U/M 1/4” Guide Clip For Pivot Rod Each Compression Retainer Clip U/M 26614 Each Cwip # U/M Cwip # U/M 81541 Each 23888 Each 1/4” Tinnerman Clip For 1/4” Pins Cwip # 1/4” Pivot Pin Push Nut Hairpin Cotter Pin Cwip # U/M Cwip # U/M 23522 Each 16238 Each 1/4” Diameter Bi-Fold Door Pins For Metal Doors Continued » 3/8” Metal Bottom Pivot Pin Metal Door Pivot Pin Cwip # U/M Cwip # U/M 81098 Each 23852 Each Metal Door Pivot Pin Replacement Parts 23887 Cap Cwip # U/M 23457 Each Spring 23283 Tinnerman Clip 23522 Replacement Parts 16144 Spring Tinnerman Clip Bottom Guide Rod Kit 1967-1979 Cwip # U/M 80063 Each 23522 Replacement Parts 16243 Guide Cap Spring 16144 Cotter Pin 16238 5-7/8” Metal Door Top Guide Top Guide Rod Kit 1967-1979 Cwip # Type U/M Replacement Parts 81499 Guide Cap Cwip # U/M 18229 With black clip Bag/4 Spring 16144 11862 Each 37045 Aluminum clip Each Retainer Clip 26614 $ BEST VALUE ECO-FRIENDLY 1/4” Bi-Fold Door Pins (Continued) www.cwip.com 5-5/16” 1/4” 1/4” Metal Door Pivot Pin Cwip # U/M 24630 Each 1/4” 13/32” Pivot Pin With Cap Replacement Parts 38319 Clevis w/Screw Cwip # U/M 21132 Each Replacement Parts 16144 Spring Cotter Pin 16238 5-7/8” Metal Door Pivot Pin Cap only included; spring and push nut not included. Cwip # U/M 23886 Each Replacement Parts 81499 Cap Metal Door Pivot Pin Spring 23283 Cwip # U/M Push Nut 23888 23915 Each Replacement Parts 23887 Cap Retainer Clip 26614 Metal Door Pivot Pin Metal Door Pivot Pin w/Plastic Sleeve Cap only included. For Slimfold Cwip # U/M 22182 Each Metal Door Pivot Pin Cwip # U/M 35169 Each Replacement Parts 38307 Cap Replacement Parts 23888 Push Nut Spring 9/32” Diameter Bi-Fold Door Pins 23283 Cwip # U/M 12126 Each Metal Door Pivot Pin Cwip # U/M 35049 Each Replacement Parts 23522 Tinnerman Clip Spring 23283 Notes Metal Door Pivot Pin For Peachtree & Floataway Cwip # U/M 30818 Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 5-1/2” 439 HARDWARE 440 13/32” Bi-Fold Door Pins www.cwip.com Metal Door Pin Assembly Metal Door Pivot Pin For Floataway For Floataway With plastic sleeve Cwip # U/M 27897 Each Replacement Parts 23888 Push Nut Cwip # U/M 27794 Each Metal Door Pivot Pin For Floataway Cwip # U/M 27795 Each 5/16” Diameter Bi-Fold Door Pins Metal Door Pivot Pin Cwip # U/M 23498 Each Bottom Pivot Pin 1967-1979. Replacement Parts 23283 Spring Cap 23887 Metal Door Pivot Pin Cwip # U/M 22199 Each Replacement Parts Threaded Tinnerman 38322 Metal Door Pivot Pin Cwip # U/M For Slimfold 24239 Each Cwip # U/M 31454 Each Replacement Parts Threaded Tinnerman 22441 5-1/2” 3/8” 5/16” Metal Door Pivot Pin With Cap Only Metal Door Pivot Pin Cwip # 17552 Replacement Parts U/M Bag/4 81499 Cap Threaded Tinnerman 38322 Cwip # U/M 26661 Each Replacement Parts 36227 Push Nut 3/8” Diameter Bi-Fold Door Pins Metal Door Pivot Pin Cwip # U/M 25934 Each $ Replacement Parts 23283 Spring Push Nut BEST VALUE 36227 ECO-FRIENDLY Metal Door Pivot Pin Cwip # U/M 26475 Each Cabinet Hardware www.cwip.com Magnetic Cabinet Catch Plastic Housing With screws With screws HARDWARE Magnetic Cabinet Catch Aluminum Housing Cwip # U/M Cwip # Color U/M 23431 Bag/10 12391 Brown Bg/10 Single Roller Catch Zinc Plated Double Roller Catch Zinc Plated Nylon wheel; with screws Nylon wheels; with screws Cwip # U/M Cwip # U/M 11802 Bag/10 12525 Bag/10 Drawer Lock Polished Brass Plastic Cabinet Shelf Bracket Cwip # U/M 32990 Each 7/8” Dia. cylinder. For doors and drawers from 3/4” to 7/8” thick. Keyed alike with 2 keys. Cwip # U/M 11012 Each Plastic Drawer Inserts 22-9/16” Cwip # “A” Size “B” Size U/M 30256 8-3/4” 4” Each 25009 11-3/4” 4” Each 29375 11-3/4” 8” Each 27492 14-5/8” 4” Each 27705 17-1/2” 4” Each 25031 20-1/2” 4” Each Economy Single Track Drawer Slide Zinc Plated Monorail Cwip # U/M 32637 Each 20-7/8” Rear Mount Drawer Sockets Front & Rear Drawer Guides • Adjustable Nylon rollers prevent side binding. Clearance of 1/16” and minimum height of 1”. Includes plastic mounting bracket, steel mounting bracket, track, rear roller, and right and left front rollers with hardware. 50 Lb. load capacity. Cwip # U/M Cwip # U/M Cwip # Size U/M 35917 Each 35063 Set 13713 24” Each Contact Paper Rear Drawer Bracket/Roller Cabinet Drawer Roller - Nylon Cabinet Drawer Track Mounting Bracket Cwip # U/M Cwip # U/M Cwip # U/M 13681 Each 24579 Each 36583 Each • 18" wide • Peel-and-stick Cwip # 33819 Color U/M Light Oak 25 Yds. 39023 Light Pine 15 Ft. 28269 25 Yds. Walnut Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 441 Cabinet Hardware (Continued) www.cwip.com HARDWARE 442 Plastic Rear Drawer Guide Drawer Guide Drawer Guide Cwip # U/M Cwip # U/M Cwip # U/M 16712 Each 29684 Each 39278 Each Drawer Guide Nylon Drawer Guide Drawer Guide Cwip # U/M Cwip # U/M Cwip # U/M 23971 Each 28402 Each 31462 Each Continued » Cabinet Knobs & Pulls Cabinet/Bi-Fold Door Backplates Cwip # Size Finish 15243 30527 12031 Die Cast Cabinet Knobs Cwip # Size Finish U/M 11451 1” Brass Bag/10 11452 11/2” Chrome Bag/10 18140 11/2” Brass Bag/10 17/8” Chrome 17/8” Brass 11919 30516 13280 U/M Chrome 3” Brass Plated 37668 Bag/10 Each Bag/10 Each Cabinet/Bi-Fold Door Backplates Bag/10 Each Bag/10 Cwip # Finish Size U/M 30569 Gold 1-11/16” Each 37498 Antique Brass 3” Bag/10 39805 Bright Brass 1-11/16” Each Bi-Fold Door Backplate Satin Nickel Bi-Fold Almond Door Pull Unfinished Wood Door Pull Cwip # Size U/M Cwip # Size U/M 36346 1-3/4” Pkg/2 31223 1-1/2” Each $ BEST VALUE ECO-FRIENDLY Cwip # Size U/M 30166 For 3” knobs Each Cabinet Pulls www.cwip.com A B $ $ Finish Size U/M Plastic Knobs 31451 Almond 11/4” Bx/25 25469 White 1 1 /4” Bx/25 39837 Almond 11/4” Each 39829 White 11/4” Each White 1-1/2” Each 1-1/16” Each Ceramic Knob B 31262 Classic Style Knob C D E C 35737 Antique English Solid Brass Knobs G D 37803 Polished Brass 11/4” Box/25 E 26928 Polished Brass 11/4” Each 1” Each Brass Plated Knobs F F G 39733 Bright Brass Polished Brass Knob & Backplate Knob Only 29387 Polished Brass 13/16” Each 311/16” Each 1-1/4” Bx/25 1-1/4” Each Size U/M Backplate Only 29285 Polished Brass Polished Brass Knob H 30344 Polished Brass Oil Rubbed Bronze Knob H I I 36633 Cwip # A Finish Brushed Nickel Plated Knobs 36151 B A Oil Rubbed Br. 36143 30558 Brushed Nickel Brushed Nickel 11/4” 11/8” Each Box/25 Each Solid Brass Knobs D C E B 36159 Satin Nickel 11/8” C 34596 Polished Chrome 11/4” Each Each $ 38195 Polished Chrome 11/4” Bag/25 11/4” Each Satin Chrome Plated Knob D 37182 Satin Chrome Satin Nickel Plated Knobs F E 37077 Satin Nickel 11/4” Each F 36167 Satin Nickel 13/16” Each G 33547 Satin Nickel 13/8” Each G With Back Plate Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Cwip # A 443 Cabinet Pulls (Continued) www.cwip.com HARDWARE 444 Cwip # Finish Size U/M 1-1/4” Each 1-1/4” Each 1-1/4” Each 1-1/4” Each Brass Plated with White Insert A A B 38947 Polished Brass/White Brass Plated with White Insert B 38523 Polished Brass/White Brass Plated with Bone Insert C 38812 Polished Brass/Bone Chrome Plated with White Insert C D D 37240 Polished Chrome/White Cwip # A A Antique English Antique Brass B Dia. Size U/M 14923 Antique English 1-1/2” Each 11027 Antique Brass 1-3/8” Bx/50 Antique Copper 1-1/4” Bx/25 Colonial Knobs 13350 B Finish Provincial Style Knobs 13360 Black 1-1/8” Bx/25 $ 39717 Antique Copper 1-1/8” Each $ 39725 Black 1-1/8” Each 1-3/8” Bx/25 1-1/2” Each Trim Style Knob C 30263 Antique English Colonnade Style Knobs D C D 13369 Antique English Carriage House Style Knobs E 25283 Antique English 1-1/4” Each 2” Set 1-7/16” Each Knob only. 23703 Antique English Knob with back plate. E Antique Brass Plated Knob E $ BEST VALUE F ECO-FRIENDLY F 39420 Antique Brass Cabinet Pulls www.cwip.com Polished Brass Satin Nickel Size U/M 31/2” Centers Each Each A 28126 Polished Brass $ 39797 Polished Brass 3” Centers $ 39789 Polished Brass 31/2” Centers Each 36135 Satin Nickel 3” Centers Each 36127 Satin Nickel 31/2” Centers Each 3” Centers Each B Plastic Pull C B 39781 C Modern Style Pulls 12032 D Finish Solid Brass Pulls E F White Chrome 23/4” Centers Bg/10 33947 Satin Nickel 3” Centers Each D 33937 Brushed Nickel 33/4” Centers Each E 35154 Polished Chrome 2 /4” Centers Each F Classic Style Pulls G 3 36103 Satin Chrome 3” Centers Each 36111 Satin Nickel 3” Centers Each 36119 Satin Nickel 31/2” Centers Each 3” Centers Each Oil Rubbed Bronze Pull 36646 Oil Rubbed Br. Satin Chrome Satin Nickel G Cwip # Finish Size U/M 3” Centers Each French Colony Style Pull A B A 23316 B Classic Style Pulls Burnished Brass 39765 Polished Brass 3” Centers Each 37232 Satin Nickel 3” Centers Each 3” Centers Each White Porcelain Pull C 33624 Polished Brass French Colony Style Pulls Pull only. D 15583 Antique English 3” Centers Each 3” Centers Set Pull with backplate. C D 28613 Antique English E Colonnade Style Pulls D 22705 Antique Copper 3” Centers Bx/25 15677 Antique English 3” Centers Each 39813 Antique Copper 3” Centers Each $ 39773 Antique Brass 3” Centers Each F Solid Stainless Steel Pulls E $ F 30268 Stainless Steel 33/4" Centers Each 30265 Stainless Steel 615/16" Centers Each 30260 Stainless Steel 93/4" Centers Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE Cwip # A 445 Shelving Board & Hardware HARDWARE 446 www.cwip.com 4’ Pegboard Shelving Particle Board Cwip # 32604 • 1/4" thick • Size: 4’ x 4’ U/M Cwip # U/M Each 31423 Sheet Size 1” x 12” x 8’ Hooks 31435 Pkg/15 White Plastic Closet Pole Sockets Closet Rod Brackets Metal Satin Brass Finish Hardwood Closet Pole Sockets Fits poles to 1-3/8” diameter Fits rods to 1-3/8” diameter Fits poles to 1-3/8” diameter Cwip # 11924 U/M Cwip # Bag/10 Pair 16972 U/M Cwip # U/M Pair 32109 Pair Gray Metal Shelf Brackets Cwip # Size U/M 12535 4” x 5” Each 11023 6” x 8” Each 12397 7” x 9” Each 12166 8” x 10” Each Metal Closet Shelf & Rod Support - Off-White 11682 10” x 12” Each Cwip # U/M 11808 12” x 14” Each 15661 Each 3” Coat & Hat Hooks Hand Rail Bracket Brass Plated Cwip # Finish U/M 17363 Bright Brass Box/25 17405 Aluminum Box/25 11561 Polished Brass Box/20 36031 Satin Nickel Each 38826 Antique Brass Each • Base size: 3-3/16” x 1-3/8” • Base to center of rail: 2-3/4” Cwip # 13715 $ 39070 Size Brass Plated Each Satin Nickel Each 38770 Antique Brass Each 38822 Oil Rubbed Bronze Each BEST VALUE • Zinc die cast construction • 2-1/4" wide • 1-1/4" projection Each 36511 $ Double Hook U/M ECO-FRIENDLY Cwip # Finish U/M 36519 Satin Nickel Each 38796 Brass Each 38817 Dull Chrome Each Closetmaid Shelving Systems & Hardware www.cwip.com SuperSlide® Shelving Cwip # Size U/M Cwip # Size U/M A 39882 12” x 12’ Each A 34038 12” x 12’ Each B 35541 16” x 12’ Each B 37509 16” x 12’ Each B B ShelfTrack™ Wall Clip/Bracket Mounting System 2836 911 1770 7546 1009 2808 2812 974 6620 1164 1166 977 Hang Track Shelf Track Wall Clips Pole Clip 977 Support Brackets Sidewall Brackets Use to hang Shelf Tracks. Creates one step leveling and eliminates the need to install each track separately, reducing installation time. Available in 40” and 80” lengths. Attaches to Hang Track. Allows adjustable height options for hanging shelving. Space Standards no more than 24” apart and no more than 6” from each end of Shelf. Available in 12”, 30”, 48”, 60” and 84” lengths. Attaches to the back of shelving to anchor the shelf to the wall. Use 1 Wall Clip every 12” and 1 at each end. For Shelf & Rod shelving on pole #117 or #118. Pole #118 recommended for SuperSlide installation. Supports front lip of shelving where it meets a sidewall. #911 Without Pin Cwip # 39858 - Each Cwip # 39866 - Each Supports front lip of Shelving. Use 2 Shelf Support Brackets every 36” and 1 at each end. Available in 12”, 16” and 20” lengths. 60” White Shelf Track Cwip # 30776 #1770 For Drywall with Pin Cwip # 34720 - Bag/48 80” White Hang Track Cwip # 30637 84” White Shelf Track Cwip # 30634 #7546 For Concrete with Pin Cwip # 37643 - Bag/12 Shelf Support Pole 1009 Use in place of support brackets when stacking 2 or more shelves. 12” Cwip # 39906 Cwip # 39874 - Each With Anchors Cwip # 34035 - Pkg/2 16” Cwip # 35549 Cwip # 39915 - Each 7561 2853 Shelf Bracket Attaches to Shelf Track to support Shelving. Use a bracket that is the same depth as the shelving. Available in 12”, 16” and 20” lengths. (Exception: 16” Shelf & Rod installation requires a 12” Bracket.) End Caps Use on cut ends of shelving. Available in large (Shelf & Rod) and small (SuperSlide, Close Mesh, and Shelf & Rod) Shelving sizes. 12” Bracket Cwip # 30640 B 2059 Large 204 Cwip # 39890 Each A 5629 Closet Rod Support Attaches to SuperSlide™ shelving to support closet rods. Use 1 every 36” and at each end. 979 204 7540 Small 7540 Cwip # 35103 Bag/96 Sidewall Bracket w/Screws Shelf Clip For Concrete Supports shelf and closet rod at wall. Attaches to the back of shelving to secure Shelf to the wall. Use 1 clip every 12” and 1 at each end. Cwip # 35226 - Each Cwip # 39945 - Bag/12 1003 5633 5655 1001 Universal Closet Rod Support Corner Support Joiner Plate Corner Rounder Bar For corner installations. Supports front lip of shelving to keep it level where it meets another shelf in the corner. Joins 2 wire shelves together. Use with SuperSlide shelving to create uninterrupted sliding action around corners. Cwip # 36854 - Each A - Cwip # 38315 - Each 8’ Hanger Bar Cwip # 39883 - Each Cwip # 39907 - Each Cwip # 39891 - Each B - Cwip # 37691 - Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE A Shelf & Rod Shelving A 447 Shelving & Hardware HARDWARE 448 www.cwip.com 86” Shelf Support Pole For use wherever a stack of 3 or more shelves are needed. Extra sturdy with pre-drilled holes which place shelves 14" apart. Hardware included. Hang Rod Connector Hanger Bar End Cap Cwip # Mfg.# U/M Cwip # Mfg.# U/M Cwip # Mfg.# U/M 39915 1009 Each 39867 2085 Each 39875 75638 Each 12” Corner Shelf Kit Cwip # Mfg.# U/M 39899 71066 Each 6’ 8’ Closet Shelving Kit Cwip # Mfg. # 36600 2875 Kit Includes: A SuperSlide® 5' shelf (3) B 3' Shoe shelf (1) C 48" Standards (5) D 30" Standards (3) E Shelf brackets (12) F 36" Hang tracks (2) G Closet rod support (7) H 3' Closet rod (2) I 5' Closet rod (1) J Closet rod caps (6) K Shelf caps (32) L 3/16" toggle bolts (18) M #12 x 2” pan head screws (18) N 1/4" Anchors (18) O Shoe shelf support inserts (2) P Standard connector (2) Adjustable Closet Rods Aluminum w/ Bright Zinc Finish 1” diameter rod with hardware $ BEST VALUE Cwip # Size U/M 23432 18” - 30” Each 22140 30” - 48” Each 20850 48” - 72” Each 18155 72” - 96” Each 20442 72” - 120” Each 19536 96” - 150” Each ECO-FRIENDLY Full Round Closet Rods Unfinished Ponderosa Pine Cwip # Size U/M 12872 1-1/4” x 8’ Each 22987 1-1/4” x 10’ Each Industrial Shelving & Bin Boxes www.cwip.com 449 HARDWARE Corrugated Shelf Bin Boxes Sturdy one-piece corrugated board shelf bins. Designed to fit 12” and 18” deep commercial and industrial shelving. Self-locking construction assembles easily in seconds. Cwip # Width x Depth U/M Industrial Open Shelving Overall Size: 18”D x 36”W x 85”H 31377 2” x 12” Each 33258 2” x 18” Each Self-standing units easily set up in rows, back-to-back, or in combination to fit available space or to meet storage needs. Shipped disassembled. 31378 4” x 12” Each 31379 6” x 12” Each 31380 8” x 12” Each 31381 12” x 12” Each 31382 4” x 18” Each 31383 6” x 18” Each 31384 8” x 18” Each Cwip # 29633 29634 Type U/M Shelves only (w/Clips) Set/10 Posts w/Supports & Hardware Set/4 Continued » Traverse Rods Superfine® Two-Way Draw Center Close Empire® Two-Way Draw Center Close Cwip # Length Slides Mfg. # U/M Cwip # Length Slides Mfg. # U/M 17728 30 - 48 10 3023-25 Each 31396 30 - 48 10 3123-25 Case/4 17727 48 - 86 20 3025-25 Each 17732 100 - 180 46 3127-25 Each 17729 66 - 120 30 3026-25 Each 17734 86 - 150 38 3027-25 Each 19777 100 - 180 56 3028-25 Each 25624 160 - 300 80 3029-25 Each Superfine® One-Way Draw End Close A Empire® One-Way Draw End Close Left to right draw Cord on left A Left to right draw Cord on left B Right to left draw Cord on right B Right to left draw Cord on right A B Cwip # Length Slides U/M 37229 48” - 86” 21 Each 21575 66” - 120” 33 Each 21577 66” - 120” 33 Each A B Cwip # Length Slides Mfg. # U/M 17682 48 - 86 21 3232-25 Each 17683 86 - 150 41 3234-25 Each 17724 48 - 86 21 3231-25 Each 17731 86 - 150 41 3233-25 Each Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Traverse Rod Hardware www.cwip.com HARDWARE 450 White Molded Slide White Single Intermediate Support Heavy-gauge steel spring support snaps over rod. Clearance of 2” to 3”. Cwip # U/M 11045 Bx/10 For Superfine® and Empire® traverse rods. Self-lubrication. White Plastic Cord Tension Pulley Cwip # U/M 13791 Each Cwip # U/M 17696 Bag/10 Window Shades & Hardware Vinyl Plastic Shades Ivory White White Light Filtering Light Filtering Room Darkening Size 37-1/4” x 37-1/4” x 46-1/4” x 55-1/4” x 73-1/4” x Convolute roller and plain bottom. Mounted on silent, self-lubricating, adjustable, push-pull tip rollers. 6’ 9’ 6’ 6’ 6’ 21374 16034 28778 24154 19943 35709 15898 15950 16087 25965 25967 28424 26466 U/M Each Each Each Each Each Mounting brackets, grips, and pull-rings must be ordered separately for all shades accessories below. White Shades Medium weight translucent window shade with linen emboss. Washable and flame resistant with plain bottom. White Fiberglass Matte Shades Vinyl coated on 100% fiberglass base. Matte embossed. Will cut down to size, contact your Sales Rep to order. Cwip # Size U/M Cwip # Size U/M 19932 37-1/4” x 6’ Each 35570 24” x 72” Each Labor for Shade Cutting: Cwip # 23372 24657 46-1/4” x 6’ Each 35578 28” x 72” Each 19393 55-1/4” x 6’ Each 35562 32” x 72” Each Each 39614 35” x 72” Each 23923 73-1/4” x 6’ Chrome Inside Window Shade Brackets White Plastic Window Shade Grip Cwip # U/M Cwip # U/M 23792 Bx/36 13797 Bg/2 pair Plastic Window Shade Ring Pull Chrome Outside Window Shade Brackets Cwip # U/M Cwip # Color U/M 21707 Bg/2 pair 30404 White Bg/2 $ BEST VALUE ECO-FRIENDLY Steel Adjustable Window Shade Brackets Cwip # U/M 27283 Bg/2 pair Mini-Blinds www.cwip.com • Tapeless construction with hardware • Fits windows 3/8” smaller and 1/2” wider than stated size • Will cut down to size, contact your sales rep to order • Easy to install, operate and clean HARDWARE 1” Vinyl No-Lead Mini-Blinds With Tilt Wand & Valance Clear Mini-Blind Wands Width Blind Cutting Cwip # 32580 Cwip # Size U/M 25762 55928 30” 24” Each Each Blind Drop Cut Cwip # 50825 Drop Sizes: 36, 37, 42, 48 Size 18 22 23 28 29 32 33 35 17 18 23 18 21 23 27 31 32 33 34 35 36 41 42 45 46 47 48 51 52 54 57 58 59 60 63 64 65 68 69 70 71 72 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 36 36 36 36 36 36 36 36 37 42 42 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 48 Drop Sizes: 49, 54, 56, 64 White Alabaster Size White Alabaster 55986 55994 55961 55970 56106 52505 55922 53355 56090 52076 53347 55250 56098 50941 50942 53339 57593 55537 53009 56849 53900 57897 55514 55665 52443 52481 55506 55498 53482 56054 50834 57282 57266 54410 50955 52572 57274 55826 55841 57258 57250 57242 50915 55394 57234 57226 53242 53418 55426 52020 55818 57218 55681 54225 54273 57210 57202 53226 56028 55418 47.5 x 49 68 x 49 71 x 49 71.5 x 49 23 x 54 31 x 54 13.5 x 56 61 x 60 17 x 64 18 x 64 19 x 64 20 x 64 21 x 64 22 x 64 23 x 64 24 x 64 25 x 64 26 x 64 27 x 64 28 x 64 29 x 64 30 x 64 31 x 64 32 x 64 33 x 64 34 x 64 35 x 64 36 x 64 37 x 64 38 x 64 39 x 64 56329 56337 52266 56024 56023 50623 56022 56077 56083 56052 56019 56017 56016 56014 56011 56010 56051 56049 56047 56045 56043 56041 56039 56004 56002 56037 50831 50830 50832 50833 53931 50499 50827 50815 54010 56053 56020 50644 50721 56015 56012 56078 56009 56050 56048 56046 56044 56042 56040 56005 56003 56038 Drop Sizes: 64 (Continued) Size 40 41 42 43 44 45 46 47 48 50 51 52 54 55 57 58 59 60 62 63 64 66 68 69 70 71 72 77 78 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 White Alabaster 56001 56082 56074 50635 56075 56070 56036 56034 56033 56065 56063 56061 50949 55906 56032 56031 56030 50931 52465 56474 52513 56057 57882 56029 56026 56025 55201 52043 56080 56000 56081 56073 56072 56071 56069 56035 56068 56066 52731 56064 56062 56060 56059 56084 52073 56058 50222 56056 56027 56055 - Drop Sizes: 72, 84 Size 17 19 23 24 25 26 27 29 30 31 32 33 34 35 36 39 43 45 46 47 48 54 58 60 62 63 70 71 72 21 23 33 35 45 46 47 48 52 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 72 84 84 84 84 84 84 84 84 84 White Alabaster 52186 50823 56018 50616 51579 56013 50646 53362 56079 52497 52330 56007 56006 50622 52338 50658 52521 56076 56067 52116 56833 50836 55626 55602 56841 52068 50725 51388 51979 56553 51995 57594 57649 57570 57785 54162 56021 50883 50645 54729 50667 52628 56008 55785 55505 52138 53441 50647 55465 56114 51015 54721 55457 52817 56578 53202 53178 57578 57562 57706 - Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 451 Mini-Blinds (Continued) HARDWARE 452 www.cwip.com 1” Vinyl-Plus Non-Leaded Mini-Blinds • • • • Steel headrail/bottom rail Warp/fade resistant PVC slats Includes valance, hold-down brackets, and mounting hardware Will cut to size (length only), contact your sales rep to order Alabaster 2” Vinyl-Plus Non-Leaded Mini-Blinds White WxH 21 24 25 26 30 30 34 35 58 60 61 62 62 69 70 93 x x x x x x x x x x x x x x x x 64 72 68 60 60 72 64 64 64 72 72 60 72 64 64 72 Cwip # 53972 53964 51203 51195 51187 57738 53947 51379 51387 57770 53940 51179 57762 53923 51372 53915 (Continued) White Cwip # Size Cwip # WxH Cwip # WxH Cwip # 16 x 65 21 x 72 21 x 84 21.5 x 60 22 x 72 23 x 72 27 x 64 28 x 60 28 x 72 28 x 84 30 x 64 30 x 72 31 x 54 33 x 64 34 x 64 34 x 72 35 x 54 35 x 64 39 x 84 40 x 84 42 x 64 44 x 60 44 x 72 45 x 22 45 x 60 46 x 42 46 x 48 46 x 60 47 x 48 51571 51572 51651 55570 56674 55594 57809 55586 51580 51667 57801 52715 56145 57793 53955 51564 56153 56802 53322 51507 53948 52474 52434 53298 56161 53306 53314 52570 56633 47 x 64 47 x 84 51 x 48 54 x 72 58 x 60 58.5 x 48 59 x 48 60 x 48 62.5 x 62 65 x 72 65.5 x 62 66.5 x 62 70 x 36 70 x 48 70 x 64 70.5 x 72 71 x 36 71 x 48 71 x 64 71.5 x 48 72 x 64 72 x 72 84 x 36 85.5 x 60 87 x 60 93 x 60 94 x 60 94.5 x 36 57810 56561 56673 52426 55562 54554 53562 56705 56473 52410 55793 55809 52418 53330 56810 56666 51772 53642 51708 53594 55337 52362 52689 51676 55554 52649 54114 52514 13 x 72 14 x 72 21 x 64 22 x 72 23 x 72 24 x 72 30 x 72 31.5 x 48 32 x 48 32.5 x 48 33 x 64 34 x 64 34 x 72 35 x 84 35 x 48 35 x 72 353/4 x 48 38 x 72 41 x 64 42 x 72 43 x 64 46 x 64 46 x 72 47 x 64 59 x 64 60 x 48 61 x 72 63 x 48 64 x 48 51972 56322 57682 52772 55585 57754 51884 54001 54041 54033 52228 57698 55609 57969 56906 56497 56177 55282 52611 56761 51211 51219 55442 52603 54052 57410 57746 53850 53826 65 x 48 68 x 54 69 x 64 70 x 36 70 x 48 70 x 64 70.5 x 48 71 x 64 71 x 72 71.5 x 48 713/4 x 48 72 x 36 72 x 48 72 x 60 72 x 84 74 x 72 78 x 70 82.5 x 48 82.5 x 60 83 x 72 84 x 50 87 x 60 90 x 54 90 x 64 93 x 72 94 x 48 94 x 64 95 x 48 96 x 60 53794 52300 57690 51460 53842 56769 53778 52587 51228 53994 56169 57386 54009 57402 57977 55266 51164 55098 56361 57777 53354 55362 55402 56682 57730 52340 56985 57418 57394 2” Faux Wood Blinds - White • Heavy duty extruded aluminum headrail • Static resistant slats will not warp or crack Size 25 26 30 30 34 34 34 $ BEST VALUE (Continued) WxH ECO-FRIENDLY x x x x x x x 72 72 48 84 60 64 72 Cwip # 52763 57618 57905 57626 52412 51668 52684 Size 30 36 47 47 48 70 72 x x x x x x x 72 64 48 64 72 60 72 Cwip # 52739 39252 38903 38895 52019 52260 52035 Mini-Blinds & Vertical Blinds www.cwip.com HARDWARE Width Blind Cutting Cwip # 52500 Import 1” Aluminum Mini-Blinds Blind Drop Cut Cwip # 52580 Alabaster Contact your Sales Rep to order non-stock items. White Cwip # WxH Cwip # WxH Cwip # WxH Cwip # WxH 56411 16 x 72 56196 63 x 60 56107 15 x 36 57107 61 x 48 56187 21 x 48 56667 66 x 96 56603 15 x 72 56340 62 x 60 57067 24 x 36 56204 69 x 60 56291 17 x 48 56396 63 x 72 18 x 84 56347 66 x 60 56124 24 x 60 56499 69 x 72 56572 56419 24 x 72 56507 70 x 72 56115 22 x 36 56404 67 x 72 71 x 48 56299 22 x 48 56155 71 x 36 22 x 72 56355 71 x 60 56195 25 x 48 56243 56492 25 x 84 56091 72 x 36 56611 56132 28 x 60 56212 72 x 60 56619 24 x 72 56412 71 x 72 56580 29 x 84 56628 71 x 84 56315 30 x 48 57115 71 x 48 56635 32 x 72 56163 72 x 36 51603 33 x 64 57123 72 x 48 56292 35 x 60 56363 75 x 60 56131 36 x 36 56420 75 x 72 56348 36 x 72 57131 81 x 48 56596 39 x 84 56379 85 x 60 56331 38 x 48 56387 89 x 60 56300 39 x 60 56444 90 x 72 53499 39 x 84 56092 92 x 48 56356 41 x 72 56395 93 x 60 56364 45 x 72 56452 94 x 72 56203 30 x 48 56251 72 x 48 56500 31 x 84 56548 72 x 84 56435 32 x 72 56515 74 x 72 53604 32 x 96 56523 78 x 72 56211 34 x 48 56531 83 x 72 453 56148 35 x 60 56259 85 x 48 56508 35 x 84 56539 86 x 72 57075 35 x 36 56228 90 x 60 56099 96 x 36 56547 90 x 72 56443 36 x 72 56236 94 x 60 56156 38 x 60 56267 94 x 48 56219 38 x 48 56556 94 x 84 56516 39 x 84 56556 94 x 84 56139 48 x 36 56171 95 x 36 56164 44 x 60 56244 98 x 60 56612 48 x 84 56100 96 x 48 56459 46 x 72 56275 100 x 48 56324 54 x 60 56403 97 x 60 57083 45 x 36 56563 102 x 72 56380 55 x 72 56460 105 x 72 56172 48 x 60 56571 107 x 72 56332 58 x 60 56108 106 x 48 56227 48 x 48 56283 108 x 48 56388 59 x 72 56468 109 x 72 56467 48 x 72 56564 110 x 84 56620 59 x 84 56179 111 x 36 56532 49 x 84 56252 114 x 60 56147 60 x 36 56595 137 x 72 56180 54 x 60 56579 118 x 72 56483 58 x 72 56260 122 x 60 56188 59 x 60 56587 130 x 72 56540 59 x 84 56484 137 x 72 56491 62 x 72 Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 Vertical Blinds & Custom Made Vertical, Venetian & Mini-Blinds HARDWARE 454 www.cwip.com Custom Made Vertical Blinds With Vinyl Slats 1-Way Draw • 1-way reversible or center draw available • Headrail is reversible for right or left hand draws • Smallest width to cut: 12” • Boxed for easy handling and storage • No valance necessary (optional) • All hardware included Off-White 2-Way Draw Slats Designer Head Rail White One panel stacks to right or left and pulls slats one way. Color Style Off-White Ivory White Plain or Ribbed Plain or Ribbed Plain Two panels close in the center. 2” vertical blinds available. Contact your Sales Representative for more information. Made to Your Custom Needs. Contact Your Sales Representative for Free Measuring! Vertical Blind Vinyl Slats Stock 1-Way Vertical Blinds Cwip # 3-1/2” Vinyl with plain slats. W x H 66” x 84” 67” x 84” 78” x 84” 78” x 84” $ 97” x 84” 1011/2” x 84” 104” x 84” 104” x 851/2” 110” x 84” 120” x 84” 125” x 84” White Ivory Alabaster 61238 58580 59206 59943 59517 59609 60559 61678 - 59762 59125 59840 59510 59237 59511 60294 59974 60031 38570 62287 - Replacement Parts 37809 37801 Ceiling Bracket Wall Bracket Each Each 51018 50001 59133 50002 83444 33111 83452 50007 50006 50011 50678 83292 52004 33110 83524 50000 50003 83300 Slat Hanger Repair Kit Includes: (25) Stems. Cwip # U/M 83267 Each $ BEST VALUE Slats can be cut to any size FREE of charge. ECO-FRIENDLY Color Off White Bright White Ivory Size Shape U/M 4’ 7’ 7’ 8’ 10’ 12’ 4’ 7’ 7’ 8’ 8’ 10’ 10’ 12’ 4’ 7’ 8’ 10’ Curved Curved Flat Curved Curved Curved Curved Curved Flat Curved Flat Curved Flat Curved Curved Curved Curved Curved Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Each Custom Made Venetian & Mini-Blinds www.cwip.com 1” Mini-Blinds Steel Headrail Aluminum Slats White or Alabaster • Smallest width to cut - 18” • Boxed for easy handling and storage • With mounting brackets • Smallest width to cut - 12” • Boxed for easy handling and storage Venetian Blind Components Head Channel (2” Blinds) Electrogalvanized heavy-gauge steel. Coated with high gloss baked vinyl enamel. Snap-in operating hardware. Specify: • Quantity • Color—white or eggshell • Exact length • Route (6” is standard) “Will Cut To Size” Colors Size U/M White or Eggshell 21/2” W x 23/16” Deep 12’ Length Bottom Rail (2” Blinds) Electrogalvanized one-piece construction with semi-hexagonal section. Top keyhole routes hold cords and conceal cord ends. Specify: • Quantity • Color—white or eggshell • Exact length • Route (6” is standard) “Will Cut To Size” Colors U/M White or Eggshell 12’ Length Hinged End Brackets Venetian Blind Cotton Tape Prepunched screw holes provide attachment to inside, inside top or face of casement. Riveted hinge cover plate secures head channel in bracket. For 2” venetian blind slats (older styles) Cwip # Color Size U/M 15436 Duck 72 Yards Roll Venetian Blind Cord Cwip # Color Type Size U/M 15524 Duck Cotton 250 Yards Roll 15435 White Nylon 250 Yards Roll 15559 White Nylon 1,000 Yards Roll Cwip # Color U/M 83034 White Pair 15632 Eggshell Pair Baltimore (p) 410.813.2885 (f) 800.935.2735 Virginia, North Carolina, South Carolina (p) 800.935.2947 (f) 804.550.3855 Washington, D.C. (p) 301.419.2900 (f) 800.935.2735 New York, New Jersey, Pennsylvania, Delaware (p) 800.275.8475 (f) 800.935.6539 HARDWARE 2” Venetian Blind Steel Headrail Aluminum Slats White or Eggshell 455 HARDWARE 456 www.cwip.com Notes $ BEST VALUE ECO-FRIENDLY SMARTKEY® RE-KEY TECHNOLOGY The Lock You Can Re -key in Seco Re-key in seconds—save time & money Available in all Kwikset keyed-entr y products Pick Resistant—passes the most stringe lock picking standard, UL437, par 11 .6 9 80 Series Deadbolt Cer tified ANSI/ BHMA Grade 1 Security—the highest level of residential security available i n th e i n d u s tr y BumpGuard™ for protection against lo ck b u m ping k wikset.com/smartkey B u m p G u a rd ™ RE-KEY IN 3 SIMPLE STEPS Insert functioning key & turn 1/ /4 turn clockwise. Insert new key & turn 1/2 turn counter-clockwise. Done. Yo our lock is now re-keye ed! Insert & remove the SmartKey learn tool. Remove functioning key. KEY CONTROL™ DEADBOLT F E AT U R I N G The Smart Alternative to Master Keying Top concealed cylinder provides one-key control for the proper ty manager Lower exposed cylinder allows unique user keys for the tenant Re-key your user or control cylinder at any time in seconds Maintains key control throughout tenant and employee tunrover User cylinder y (tenant) * Key Control cy ylinder (prroperty o manager) *Rotate cylinder y cap to expose Key Contrro ol cylinder y k wikset.com/keycontrol C opyright © 201 1 Stanley B lack & D e cke r • 1 6741 Safe Multi-Family Communities Smart Solutions for every opening At Ingersoll Rand, we understand multi-family security and can help you deliver effective, streamlined and reliable safety and security at every access point in your community. With more than 100 years of experience in creating safe and secure environments, we offer knowledgeable service, superior products and comprehensive planning that fits your needs. • Managing perimeter access points to create a safer community. • Balancing ease of use and access control of common areas can be a challenge. • Keep private residences private and maintain credential control. * Manufacturing Products in the USA Since 1982 * EF-161 MEST-104 18-CW 15-CW SP-135 4-2-CW LP-211 7137 BLP-211 GLP-307 AF-261 FL-212W4 ETS-115 8 x 34 Kick Plate Don-Jo Mfg., Inc. • Sterling, MA 01564 • www.don-jo.com GO BEYOND THE SURFACE AS A LEADER IN THE INDUSTRY, DALTILE OFFERS A BROAD SELECTION OF QUALITY PRODUCTS FOR ALL AREAS OF THE HOME. PORCELAIN CERAMIC NATURAL STONE For more product information: DALTILE.COM | 800.933.TILE Contact your Central Wholesalers Sales Representative to place your order. COUNTERTOPS