Victor Awning Window

Transcription

Victor Awning Window
SPECIFICATIONS
& SIZES
General
Aluminum awning type windows
are to be automatic self locking
and shall conform to AAMA specifications for residential and light
commercial type buildings.
Material
Extruded sections shall be 6063T5 aluminum alloy having a guaranteed minimum tensile strength
of 22,000 lbs./sq. in. and yield of
16,000 lbs./sq. in. Minimum frame
depth 1-15/16”, vent depth I”. All
pins, bushings, bearings, rivets and
fasteners shall be of aluminum,
nylon or approved plated steel.
Hinges, vent links and torque
transfer links shall be 6061-T6
aluminum alloy with minimum
tensile of 38,000 lbs./sq. in. and
yield of 35,000 lbs./sq. in. Minimum
wall thickness .062. All dimensions
to be in accordance with generally
accepted commercial tolerances.
AWNING WINDOW SIZES
Overall dimensions are tip-to-tip measurements.
For buck size deduct 1” from height and 1” from width.
19-1/8"
Automatic Locks
Cam actuated locks, riveted
to an independent link bar will
engage studs on either side of
vents during final turns of operator
to insure tight closure, eliminating
adjustments and assuring positive
locking of window.
Screens
Windows will be supplied with
32"
37"
40"
44"
48"
531/8"
32"- 383/8"
44"- 48"- 505/8"
57"- 63"
771/2"
Special Widths and Heights and Extra Vents Can Be Made to Order
Shading Not Available in V-300 Series
screens unless specified otherwise. Aluminum frames with
fiberglass screen cloth 18x16 mesh
anchored into frame with vinyl
spline. Screens shall be removed
easily by raising ¼” and lifting out.
Erection (by other)
The contractor shall securely fasten window in place; plumb, level
and square without distortion of
frame members. He should not
permit screws to interfere with
operating hardware. A suitable
caulking compound shall be applied behind and around the outer
flanges of the window before and/
or after their being set in the
openings. Where window comes
in contact with lime content
masonry the surface must be
protected by the contractor with
suitable material.
092606 PRINTED IN THE USA
victorawning.indd 2-3
261/2"
24"- 26"
Construction
Main and vent frames to
be screwed on construction.
Double weather stripping of
extruded vinyl between vents and
main frame. All operating mechanisms (other than operator) to be
concealed. Main frame available
with or without integral fin. Vents
can be removed for reglazing.
Window to accept operator at
either jamb.
Hardware and Operation
Operator shall be of worm and
sector, offset type, with heat treated steel gears properly coated. All
moving parts nylonized including
heavy duty torque tube which
transfers power equally to actuating mechanisms in both jambs.
Top vent to drop to permit easy
cleaning from inside. All vents to
move simultaneously.
24"
Glazing
Windows shall be factory glazed,
using an approved method.
In your area call:
www.victorsun.com
VICTOR SUN CONTROL OF PHILA, PA
6/26/2009 3:53:43 PM
B rring
ing out
o ut the bes t q u a l i t i e s o f a n y s u n r o om, breezeway
b reezeway o r p a t i o e nclosure...
Plenty of fresh air, rain or shine
without the bother of insects in
the summer months... A tightly sealed window to extend
the beauty of fall in comfort...
While providing year round
securtiy with the Victor Double
Locking vent system.
The Victor Window Line continues to set the standard for aluminum awning windows. For quality
and value choose the V-100, drop-in single glazed
glass, the V-200, marine glazed 3/4” insulated
glass or the V-300, completely thermally broken
3/4” marine glazed glass for your next
awning window.
When in the market for an awning
window, insist on these quality features:
Spring loaded full screen for 100 percent ventilation rain or shine, with double weather
stripping & elongated drip cap for better allweather protection
Dual security latches that lock automatically when the window is closed
Roto type operator, with nylon bushings & slide guides for easy operation
All aluminum box beam construction for the maximum in strenght & durability
Custom sizes available both in white or bronze finish (silver in V-100 series only)
A wide variety of glass options; low-E, bronze & gray tint, obscure, acrylic, tempered, etc.
Be sure to ask your
representative for more options.
victorawning.indd 4-5
6/26/2009 3:53:58 PM