Deltrol Controls

Transcription

Deltrol Controls

DC
Deltrol
CONTROLS
Deltrol Controls Inlet Valve Data Sheets
Table of Contents
DSVP40-R..................................................................2
DSVP40-S..................................................................5
DSVP42-S..................................................................8
DSV43......................................................................11
DSV43N...................................................................14
DSVP40-R
DC
Deltrol
CONTROLS
DSVP40-R SOLENOID VALVE
Pilot-operated solenoid valve designed to control the
flow of water.
Applications
• Coffee machines
• Vending equipment
• Ice maker equipment
• Water purification
equipment
• Potable water
applications
Features
• UL & NSF certified
• Economical
construction
• Encapsulated coil
• Multiple flow washer
options
Electrical Specifications
Coil Voltages
24, 120, 240 VAC 50,60 Hz | 24 VDC
Coil Power
24 VAC 8W, 120 VAC 9VA, 240 VAC 6 VA | 24 VDC 8W
Coil Terminals
0.25” spade terminals
Duty Cycle
Intermittent
Coil Treatment
Nylon encapsulated
Insulation Class
Class A (105º C)
Ambient Temperature
5-60º C
•10 min on / 5 min off @25º C media / ambient
Mechanical Specifications
Media
Water
Operating Pressure
5-145 psi
Burst Pressure
870 psi
Flow Regulator Options
0.26, 0.53, 0.8, 1.3, 2.0, 3.7 gpm
Inlet / Outlet Connections
Inlet: 3/4-11-1/2 hose thread
Outlet: Ø0.47 barb (standard) | 7/16-20 UNF thread (optional)
Mounting
Bracket available in 90º increments
Filter Screen
Removable plastic screen in inlet port
Valve Body Material
Glass filled nylon
Seal Material
EPDM
Product Weight
3.5 oz.
Agency Approvals
Specifications subject to change without notice
UR, cUR, NSF
1 of 3
Rev 05/18/11
©2011 Deltrol Controls - A Division of Deltrol Corp.
2740 South 20th Street Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | www.deltrol-controls.com‌| [email protected]
DSVP40-R
DC
Deltrol
CONTROLS
Dimensional View
Units: Inches [mm]
Ordering Information
DSVP40 - R - 1 - B - 3.7 - 3
1 2 3 4 5
1. Outlet port configuration
• R = Ø.47 barb as shown in drawing
above
• T = Optional 7/16-20 threaded outlet
2. Coil voltage
• 1 = 120 VAC
• 2 = 240 VAC
• 3 = 24 VAC
• 4 = 24 VDC
3. Coil terminal position
• B = Back, opposite inlet port (standard)
• L = Left of inlet port *
• R = Right of inlet port *
• F = Terminals face toward inlet port
4. Flow regulator
• N/A = None
• 0.26 = 0.26 gpm (1.0 lpm)
• 0.53 = 0.53 gpm (2.0 lpm)
• 0.80 = 0.80 gpm (3.0 lpm)
• 1.3 = 1.3 gpm (5.0 lpm)
• 2.0 = 2.0 gpm (7.5 lpm)
• 3.7 = 3.7 gpm (14.0 lpm)
5. Bracket
• 3 = Standard mounting bracket (as shown in drawing)
• X = No bracket
* when viewing valve with inlet facing you
2 of 3
Rev 05/18/11
DSVP40-R
DC
Deltrol
CONTROLS
Standard Part Numbers
Part Number
Coil Voltage
Water Flow
Model Description
75003-80
110/120 VAC 50/60HZ
0.26 GPM
DSVP40-R-1-B-.26-3
75003-81
110/120 VAC 50/60HZ
0.53 GPM
DSVP40-R-1-B-.53-3
75003-82
110/120 VAC 50/60HZ
0.80 GPM
DSVP40-R-1-B-0.8-3
75003-83
110/120 VAC 50/60HZ
1.32 GPM
DSVP40-R-1-B-1.32-3
75003-85
110/120 VAC 50/60HZ
2.00 GPM
DSVP40-R-1-B-2-3
75003-86
110/120 VAC 50/60HZ
3.70 GPM
DSVP40-R-1-B-3.7-3
75003-90
110/120 VAC 50/60HZ
N/A
DSVP40-R-1-B-N/A-3
75004-80
220/240VAC 50/60HZ
0.26 GPM
DSVP40-R-2-B-.26-3
75004-81
220/240VAC 50/60HZ
0.53 GPM
DSVP40-R-2-B-.53-3
75004-82
220/240VAC 50/60HZ
0.80 GPM
DSVP40-R-2-B-0.8-3
75004-83
220/240VAC 50/60HZ
1.32 GPM
DSVP40-R-2-B-1.32-3
75004-85
220/240VAC 50/60HZ
2.00 GPM
DSVP40-R-2-B-2-3
75004-86
220/240VAC 50/60HZ
3.70 GPM
DSVP40-R-2-B-3.7-3
75004-90
220/240VAC 50/60HZ
N/A
DSVP40-R-2-B-N/A-3
75005-80
24VAC 50/60HZ
0.26 GPM
DSVP40-R-3-B-.26-3
75005-81
24VAC 50/60HZ
0.53 GPM
DSVP40-R-3-B-.53.3
75005-82
24VAC 50/60HZ
0.80 GPM
DSVP40-R-3-B-0.8-3
75005-83
24VAC 50/60HZ
1.32 GPM
DSVP40-R-3-B-1.32-3
75005-85
24VAC 50/60HZ
2.00 GPM
DSVP40-R-3-B-2-3
75005-86
24VAC 50/60HZ
3.70 GPM
DSVP40-R-3-B-3.7-3
75005-90
24VAC 50/60HZ
N/A
DSVP40-R-3-B-N/A-3
75010-80
24VDC
0.26 GPM
DSVP40-R-4-B-.26-3
75010-81
24VDC
0.53 GPM
DSVP40-R-4-B-.53-3
75010-82
24VDC
0.80 GPM
DSVP40-R-4-B-0.8-3
75010-83
24VDC
1.32 GPM
DSVP40-R-4-B-1.32-3
75010-85
24VDC
2.00 GPM
DSVP40-R-4-B-2-3
75010-86
24VDC
3.70 GPM
DSVP40-R-4-B-3.7-3
75010-90
24VDC
N/A
DSVP40-R-4-B-N/A-3
3 of 3
Rev 05/18/11
DSVP40-S
DC
Deltrol
CONTROLS
DSVP40-S SOLENOID VALVE
Pilot-operated solenoid valve designed to control the
flow of water.
Applications
• Coffee machines
equipment
• Potable water
applications
Features
• UL Certified
• Economical
construction
options
Coil Voltages
24, 120, 240 VAC 50,60 Hz | 24 VDC
Coil Power
Coil Terminals
Duty Cycle
Intermittent
Coil Treatment
Nylon encapsulated
Insulation Class
Class A (105º C)
Ambient Temperature
5-60º C
Media
Water
Operating Pressure
5-145 psi
Burst Pressure
870 psi
0.26, 0.53, 0.8, 1.3, 2.0, 3.7 gpm
Inlet: 3/4-14 BSPP thread
Outlet: Ø0.47 barb (standard)
Mounting
Filter Screen
Valve Body Material
Glass filled nylon
Seal Material
EPDM
Product Weight
3.5 oz.
Agency Approvals
UR, cUR
1 of 3
Rev 05/18/11
DSVP40-S
DC
Deltrol
CONTROLS
Dimensional View
Units: Inches [mm]
DSVP40 - S - 1 - B - 3.7 - 3
1 2 3 4
1. Coil voltage
• 1 = 120 VAC
• 2 = 240 VAC
• 3 = 24 VAC
• 4 = 24 VDC
2. Coil terminal position
• B = Back, opposite inlet port (standard)
• L = Left of inlet port *
• R = Right of inlet port *
• F = Terminals face toward inlet port
4. Bracket
• X = No bracket
3. Flow regulator
• N/A = None
• 0.26 = 0.26 gpm (1.0 lpm)
• 0.53 = 0.53 gpm (2.0 lpm)
• 0.80 = 0.80 gpm (3.0 lpm)
• 1.3 = 1.3 gpm (5.0 lpm)
• 2.0 = 2.0 gpm (7.5 lpm)
• 3.7 = 3.7 gpm (14.0 lpm)
* when viewing valve with inlet facing you
2 of 3
Rev 05/18/11
DSVP40-S
DC
Deltrol
CONTROLS
Part Number
Coil Voltage
Water Flow
Model Description
75016-80
110/120 VAC 50/60HZ
0.26 GPM
DSVP40-S-1-B-.26-3
75016-81
110/120 VAC 50/60HZ
0.53 GPM
DSVP40-S-1-B-.53-3
75016-82
110/120 VAC 50/60HZ
0.80 GPM
DSVP40-S-1-B-0.8-3
75016-83
110/120 VAC 50/60HZ
1.32 GPM
DSVP40-S-1-B-1.32-3
75016-85
110/120 VAC 50/60HZ
2.00 GPM
DSVP40-S-1-B-2-3
75016-86
110/120 VAC 50/60HZ
3.70 GPM
DSVP40-S-1-B-3.7-3
75016-90
110/120 VAC 50/60HZ
N/A
DSVP40-S-1-B-N/A-3
75017-80
220/240VAC 50/60HZ
0.26 GPM
DSVP40-S-2-B-.26-3
75017-81
220/240VAC 50/60HZ
0.53 GPM
DSVP40-S-2-B-.53-3
75017-82
220/240VAC 50/60HZ
0.80 GPM
DSVP40-S-2-B-0.8-3
75017-83
220/240VAC 50/60HZ
1.32 GPM
DSVP40-S-2-B-1.32-3
75017-85
220/240VAC 50/60HZ
2.00 GPM
DSVP40-S-2-B-2-3
75017-86
220/240VAC 50/60HZ
3.70 GPM
DSVP40-S-2-B-3.7-3
75017-90
220/240VAC 50/60HZ
N/A
DSVP40-S-2-B-N/A-3
75018-80
24VAC 50/60HZ
0.26 GPM
DSVP40-S-3-B-.26-3
75018-81
24VAC 50/60HZ
0.53 GPM
DSVP40-S-3-B-.53.3
75018-82
24VAC 50/60HZ
0.80 GPM
DSVP40-S-3-B-0.8-3
75018-83
24VAC 50/60HZ
1.32 GPM
DSVP40-S-3-B-1.32-3
75018-85
24VAC 50/60HZ
2.00 GPM
DSVP40-S-3-B-2-3
75018-86
24VAC 50/60HZ
3.70 GPM
DSVP40-S-3-B-3.7-3
75018-90
24VAC 50/60HZ
N/A
DSVP40-S-3-B-N/A-3
75019-80
24VDC
0.26 GPM
DSVP40-S-4-B-.26-3
75019-81
24VDC
0.53 GPM
DSVP40-S-4-B-.53-3
75019-82
24VDC
0.80 GPM
DSVP40-S-4-B-0.8-3
75019-83
24VDC
1.32 GPM
DSVP40-S-4-B-1.32-3
75019-85
24VDC
2.00 GPM
DSVP40-S-4-B-2-3
75019-86
24VDC
3.70 GPM
DSVP40-S-4-B-3.7-3
75019-90
24VDC
N/A
DSVP40-S-4-B-N/A-3
3 of 3
Rev 05/18/11
DSVP42-S
DC
Deltrol
CONTROLS
DSVP42-S SOLENOID VALVE
Dual pilot-operated solenoid valve designed to control
the flow of water.
Applications
• Coffee machines
equipment
• Potable water
applications
Features
• UL & NSF certified
• Dual outlet ports
• Economical
construction
options
Coil Voltages
24, 120, 240 VAC 50,60 Hz | 24 VDC
Coil Power
Coil Terminals
Duty Cycle
Intermittent
Coil Treatment
Nylon encapsulated
Insulation Class
Class A (105º C)
Ambient Temperature
5-60º C
Media
Water
Operating Pressure
5-145 psi
Burst Pressure
870 psi
0.26, 0.53, 0.8, 1.3, 2.0, 3.7 gpm
Inlet: 3/4- 11 1/2 hose thread
Outlet: Ø0.47 barb
Mounting
Filter Screen
Valve Body Material
Glass filled nylon
Seal Material
EPDM
Product Weight
6.0 oz.
Agency Approvals
UR, cUR, NSF
1 of 3
Rev 05/18/11
DSVP42-S
DC
Deltrol
CONTROLS
Dimensional View
Units: Inches [mm]
DSVP42 - S - 1 - B - 3.7 / 3.7- 3
1
2
2 3
1. Coil voltage
• 1 = 120 VAC
• 2 = 240 VAC
• 3 = 24 VAC
• 4 = 24 VDC
3. Bracket
• X = No bracket
2. Flow regulator
• N/A = None
• 0.26 = 0.26 gpm (1.0 lpm)
• 0.53 = 0.53 gpm (2.0 lpm)
• 0.80 = 0.80 gpm (3.0 lpm)
• 1.3 = 1.3 gpm (5.0 lpm)
• 2.0 = 2.0 gpm (7.5 lpm) (Inlet only)
• 3.7 = 3.7 gpm (14.0 lpm) (Inlet only)
2 of 3
Rev 05/18/11
DSVP42-S
DC
Deltrol
CONTROLS
Part Number
Coil Voltage
Flow Washer
Model Description
75024-80
120 VAC 50/60HZ
0.26 GPM *
DSVP42-S-1-B-0.26/0.26-3
75024-81
120 VAC 50/60HZ
0.53 GPM *
DSVP42-S-1-B-0.50/0.50-3
75024-82
120 VAC 50/60HZ
0.80 GPM *
DSVP42-S-1-B-0.80/0.80-3
75024-83
120 VAC 50/60HZ
1.32 GPM *
DSVP42-S-1-B-1.32/1.32-3
75024-85
120 VAC 50/60HZ
2.00 GPM **
DSVP42-S-1-B-2.00/2.00-3
75024-86
120 VAC 50/60HZ
3.70 GPM **
DSVP42-S-1-B-3.70/3.70-3
75025-80
240 VAC 50/60HZ
0.26 GPM *
DSVP42-S-2-B-0.26/0.26-3
75025-81
240 VAC 50/60HZ
0.53 GPM *
DSVP42-S-2-B-0.53/0.53-3
75025-82
240 VAC 50/60HZ
0.80 GPM *
DSVP42-S-2-B-0.80/0.80-3
75025-83
240 VAC 50/60HZ
1.32 GPM *
DSVP42-S-2-B-1.32/1.32-3
75025-85
240 VAC 50/60HZ
2.00 GPM **
DSVP42-S-2-B-2.00/2.00-3
75025-86
240 VAC 50/60HZ
3.70 GPM **
DSVP42-S-2-B-3.70/3.70-3
75026-80
24 VAC 50/60HZ
0.26 GPM *
DSVP42-S-3-B-0.26/0.26-3
75026-81
24 VAC 50/60HZ
0.53 GPM *
DSVP42-S-3-B-0.53/0.53-3
75026-82
24 VAC 50/60HZ
0.80 GPM *
DSVP42-S-3-B-0.80/0.80-3
75026-83
24 VAC 50/60HZ
1.32 GPM *
DSVP42-S-3-B-1.32/1.32-3
75026-85
24 VAC 50/60HZ
2.00 GPM **
DSVP42-S-3-B-2.00/2.00-3
75026-86
24 VAC 50/60HZ
3.70 GPM **
DSVP42-S-3-B-3.70/3.70-3
75027-80
24 VDC
0.26 GPM *
DSVP42-S-4-B-0.26/0.26-3
75027-81
24 VDC
0.53 GPM *
DSVP42-S-4-B-0.53/0.53-3
75027-82
24 VDC
0.80 GPM *
DSVP42-S-4-B-0.80/0.80-3
75027-83
24 VDC
1.32 GPM *
DSVP42-S-4-B-1.32/1.32-3
75027-85
24 VDC
2.00 GPM **
DSVP42-S-4-B-2.00/2.00-3
75027-86
24 VDC
3.70 GPM **
DSVP42-S-4-B-3.70/3.70-3
* Flow washer in each outlet port
** Flow washer in inlet port only
3 of 3
Rev 05/18/11
DSV43
DC
Deltrol
CONTROLS
DSV43 SOLENOID VALVE
Robust pilot-operated solenoid valve designed to
control the flow of water or air.
Applications
• Welding equipment
• Not for potable water
applications
• For potable water
applications, see our
DSV43N
Features
• UL certified
• Brass body
• Class F construction
Coil Voltages
24, 100, 120, 200, 240 VAC 50, 60 Hz | 12, 24, 36 VDC
Coil Power
AC valves 5 W | DC valves 8 W
Coil Terminals
0.25” spade terminals standard, lead wires optional
Duty Cycle
Continuous
Coil Treatment
Polyester encapsulated
Insulation Class
Class F (155º C)
Ambient Temperature
25º C
Media
Water
Operating Pressure
5-145 psi
Burst Pressure
725 psi
1/8-27 NPT inlet & outlet
Mounting
#10-32 UNF-2B tapped holes on bottom of valve body
Filter Screen
Internal steel mesh (optional)
Valve Body Material
Brass
Seal Material
BUNA-N
Product Weight
5.3 oz.
Agency Approvals
UR, cUR
1 of 3
Rev 05/18/11
DSV43
DC
Deltrol
CONTROLS
Dimensional View
Units: Inches [mm]
DSV43 - 145 - F - 120A - B12
1
Coil voltage
• 12D = 12 VDC
• 24D = 24 VDC
• 36D = 36 VDC
• 24A = 24 VAC
• 100A = 100 VAC
• 120A = 120 VAC
• 200A = 200 VAC
• 240A = 240 VAC
2 of 3
Rev 05/18/11
DSV43
DC
Deltrol
CONTROLS
Part Number
Coil Voltage
Model Description
75028-80
12 VDC
DSV43-F-12D-B12
75028-81
24 VDC
DSV43-F-24D-B12
75028-82
36 VDC
DSV43-F-36D-B12
75029-80
24 VAC 50/60HZ
DSV43-F-24A-B12
75029-82
120 VAC 50/60HZ
DSV43-F-120A-B12
75029-84
240 VAC 50/60HZ
DSV43-F-240A-B12
3 of 3
Rev 05/18/11
DSV43N
DC
Deltrol
CONTROLS
DSV43N SOLENOID VALVE
Robust pilot-operated solenoid valve designed to
control the flow of water.
Applications
• Coffee machines
equipment
• Potable water
applications
Features
• UL and NSF certified
• Plated brass body
• Class F construction
Coil Voltages
24, 100, 120, 200, 240 VAC 50,60 Hz | 12, 24, 36 VDC
Coil Power
AC valves 5W | DC valves 8W
Coil Terminals
0.25” spade terminals standard, lead wires optional
Duty Cycle
Continuous
Coil Treatment
Polyester encapsulated
Insulation Class
Class F (155º C)
Ambient Temperature
25º C
Media
Water
Operating Pressure
5-145 psi
Burst Pressure
725 psi
1/8-27 NPT inlet & outlet
Mounting
#10-32 UNF-2B tapped holes on bottom of valve body
Filter Screen
Internal steel mesh (optional)
Valve Body Material
Tin Plated Brass
Seal Material
EPDM
Product Weight
5.3 oz.
Agency Approvals
UR, cUR, NSF
1 of 3
Rev 05/18/11
DSV43N
DC
Deltrol
CONTROLS
Dimensional View
Units: Inches [mm]
DSV43N - 145 - F - 120A - S12
1
Coil voltage
• 12D = 12 VDC
• 24D = 24 VDC
• 36D = 36 VDC
• 24A = 24 VAC
• 100A = 100 VAC
• 120A = 120 VAC
• 200A = 200 VAC
• 240A = 240 VAC
2 of 3
Rev 05/18/11
DSV43N
DC
Deltrol
CONTROLS
Part Number
Coil Voltage
Model Description
75030-80
12 VDC
DSV43N-F-12D-S12
75030-81
24 VDC
DSV43N-F-24D-S12
75030-82
36 VDC
DSV43N-F-36D-S12
75031-80
24 VAC 50/60HZ
DSV43N-F-24A-S12
75031-82
120 VAC 50/60HZ
DSV43N-F-120A-S12
75031-84
240 VAC 50/60HZ
DSV43N-F-240A-S12
3 of 3
Rev 05/18/11

Deltrol Controls

Transcription

Similar documents

Deltrol CONTROLS