1.7 to 2.5 GHz BLADE ANTENNA P/N: BL1-16165 - Haigh

1.7 to 2.5 GHz
BLADE ANTENNA
P/N: BL1-16165
Haigh‐Farr’s P/N BL1‐16165 Blade antenna utilizes the identical materials and construction as our 60XX and 61XX series Blades. Originally introduced in the early ‘70’s, our Blades have proven to be reliable and rugged for a variety of applications. With over 30,000 of these antennas produced, our BL1‐16165 model continues in this tradition with an extended bandwidth design. This antenna utilizes the same mounting flange as our 60XX and 61XX series. E LECTRICAL :
M ECHANICAL :
Operating Band:
1700 – 2500 MHz
Connector:
SMA female (TNC available)
Impedance:
50 Ohms Nominal
Dimensions:
See attached drawing
VSWR:
<1.5:1 typical, 1.7:1 max
Finish:
Polarization:
Linear, mainly vertical
All exposed metallic surfaces either nickel‐plated per MIL‐C‐
26074 or passivated stainless steel.
Environmentals:
Typical for supersonic airborne applications.
Required Mounting
82° Flathead #4 Standard; 100° Flathead #4 or M3 optional
Power Handling:
Radiation Patterns:
30 Watts average Sufficient airflow is required at higher peak levels
Hemispherical See attached patterns * Antenna is not ESD sensitive. Weight:
1.3 oz / 36 gm
DESIGN CAPABILITY
Haigh‐Farr has an over 40 year history of designing and producing exceptionally rugged, high‐performance antennas.
If you don’t find an antenna meeting your requirements in our standard list of products, Haigh‐Farr has the experience
and modeling capability to customize a solution. Adaptations of existing designs can be done with very short lead
times. Contact Haigh‐Farr for a review of your antenna requirements. BL1‐16165 Broadband Blade Rev 0 05/10 Approved for release DF 5/10 BL1‐16165 Broadband Blade Rev 0 05/10 Approved for release DF 5/10 Haigh-Farr,
Haigh-Farr,Inc.
Inc. 43
43Harvey
HarveyRoad,
Road,Bedford
Bedford NH
NH 03110
03110
Tel:
Tel: 603-644-6170
603-644-6170 Fax:
Fax: 603-644-6190
603-644-6190
E-mail:
[email protected]
Web
Site:
www.haigh-farr.com
E-mail: [email protected] Web Site: www.haigh-farr.com
HAIGH-FARR
* Above dimensions are in inches 0 dBi
(5 dB/div) ELEVATION (PITCH) 2.00 GHz AZIMUTH (YAW) 2.00 GHz Note: Measured on a smooth cylindrical ground plane. Fins and other protrusions on the vehicle will perturb the radiation pattern. The extent of any perturbations cannot be fully determined until radiation patterns are either calculated or measured on a model of the vehicle. Haigh‐Farr offers engineering services, which include the calculation of radiation patterns on a specific vehicle. BL1‐16165 Broadband Blade Rev 0 05/10 Approved for release DF 5/10 Haigh-Farr, Inc. 43 Harvey Road, Bedford NH 03110
Tel: 603-644-6170 Fax: 603-644-6190
E-mail: [email protected] Web Site: www.haigh-farr.com