The Thin Wheels from PFERD

The thin wheels from PFERD
Cutting more!
TRUST BLUE
■■ Perceivable increase in terms of aggressiveness and tool life
■■ Even more thin, low-burr cuts at maximum economic value
■■ Unrivaled cutting comfort and labour-saving work
The thin wheels from PFERD
Cutting more!
Thin cut-off wheels
In all our thin cut-off wheels product lines,
PFERD has produced a noticeable performance
increase for the user:
■■Thinner, faster cutting with little burr
formation
■■Highest possible economic value
■■Comfortable and safe
PFERD thin cut-off wheels are characterized by
their special bond formulation.
Intensive research, development and targeted
implementation in state-of-the-art production
facilities guarantee our high quality and safety
standards.
In addition to the high quality standards,
health and safety as well as ergonomics play a
prominent role at PFERD.
PFERDERGONOMICS®
PFERDERGONOMICS® recommends the thin
cut-off wheels to sustainably reduce vibration, noise and dust levels during use and to
improve working comfort.
The range of thin cut-off wheels (< 2 mm)
made by PFERD will help to improve the
working conditions of the user significantly.
The tools are characterized by reduced noise
values, reduced vibrations under 5 m/s²
(according to ISO 5349-1+2) and less dust.
Working with the exceptionally aggressive
and fast PFERD cut-off wheels allows cool
cutting with little burr formation and unsurpassed comfort.
PFERDVIDEO
You will receive more
information here or at
www.pferd.com
Product lines
For the many different cutting tasks in industry and crafts, PFERD offers thin cut-off wheels in three product lines with diverse special features:
Universal Line PS-FORTE (PSF)
For general use in
industry and crafts
Performance Line SG-ELASTIC (SG)
Special Line SG-PLUS (SGP)
Widest range of tools
for professional use in
industry and crafts
For special tasks in the
industry
Cut-off wheels for
cordless angle grinders
The most important PFERD tool:
The Tool Manual
Competence when working on
stainless steel (INOX) and aluminium
Thin cut-off wheels of width 1.0 mm are
ideally suitable for modern cordless angle
grinders due to their narrow width, their
superior cutting characteristics and optimum guidability. They guarantee more cuts
per battery charge, which is why they are
very economical.
With more than 7,500 innovative solutions
for surface processing and cutting
materials.
PFERD offers a comprehensive range
of tools that meets the requirements
of processing stainless steel (INOX) and
aluminium.
Request your own free personal copy at
www.pferd.com.
We are happy to help solve your application
problems. The PFERD PRAXIS brochures
"Tools for Use on Stainless Steel" and
"Tools for Use on Aluminium" contain
many valuable application notes.
PFERD Tools
for Use on Stainless Steel
PFERD Tools for Use on Aluminium
TRUST BLUE
INOX
2
TRUST BLUE
Aluminium
The thin wheels from PFERD
Universal Line PS-FORTE
Medium-hard, multipurpose tool of hardness P
with high cutting performance and long tool
life.
Abrasive: Aluminium oxide A
Materials to be worked:
Steel
Applications:
Cutting of sheet metal, profiles and solid
material
Recommendations for use:
■■For fast, easy cutting with minimized burr
formation
■■Suitable for use on angle grinders of all
output categories
■■The use of large clamping flanges (SFS 76,
page 4) increases the lateral stability and
ensures precise wheel guidance, in particular
for thin cut-off wheels of the flat type with
dia. 178 and 230 mm
Steel
PFERDERGONOMICS®:
EHT
Description
Flat type EHT (shape 41)
EHT 115-1,0 A 60 P PSF/22,23
EHT 115-1,6 A 46 P PSF/22,23
EHT 125-1,0 A 60 P PSF/22,23
EHT 125-1,6 A 46 P PSF/22,23
EHT 150-1,6 A 46 P PSF/22,23
EHT 178-1,6 A 46 P PSF/22,23
EHT 230-1,9 A 46 P PSF/22,23
Medium-hard, multipurpose tool of hardness P
(INOX) with high cutting performance and
long tool life, for reduced heat build-up during
cutting.
Abrasive: Aluminium oxide A
Manufactured without addition of ferrous,
chlorinated and sulphurous fillers.
Materials to be worked:
Stainless steel (INOX)
Applications:
Cutting of sheet metal, profiles and solid
material
Description
Flat type EHT (shape 41)
EHT 115-1,0 A 60 P PSF-INOX/22,23
EHT 115-1,6 A 46 P PSF-INOX/22,23
EHT 125-1,0 A 60 P PSF-INOX/22,23
EHT 125-1,6 A 46 P PSF-INOX/22,23
EHT 150-1,6 A 46 P PSF-INOX/22,23
EHT 178-1,6 A 46 P PSF-INOX/22,23
EHT 230-1,9 A 46 P PSF-INOX/22,23
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
560242
538111
560259
538128
953341
581209
581339
41 A 60 P BF 80
41 A 46 P BF 80
41 A 60 P BF 80
41 A 46 P BF 80
41 A 46 P BF 80
41 A 46 P BF 80
41 A 46 P BF 80
115 x 1.0 x 22.23 (7/8)
115 x 1.6 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
125 x 1.6 x 22.23 (7/8)
150 x 1.6 x 22.23 (7/8)
178 x 1.6 x 22.23 (7/8)
230 x 1.9 x 22.23 (7/8)
13,300
13,300
12,200
12,200
10,200
8,600
6,600
Recommendations for use:
■■For fast, easy cutting with minimized burr
formation
■■Suitable for use on angle grinders of all
output categories
■■The use of large clamping flanges (SFS 76,
page 4) increases the lateral stability and
ensures precise wheel guidance, in particular
for thin cut-off wheels of the flat type with
dia. 178 and 230 mm
25
25
25
25
25
25
25
INOX
PFERDERGONOMICS®:
EHT
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
560266
538135
560372
538142
581223
581230
581216
41 A 60 P BF 80
41 A 46 P BF 80
41 A 60 P BF 80
41 A 46 P BF 80
41 A 46 P BF 80
41 A 46 P BF 80
41 A 46 P BF 80
115 x 1.0 x 22.23 (7/8)
115 x 1.6 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
125 x 1.6 x 22.23 (7/8)
150 x 1.6 x 22.23 (7/8)
178 x 1.6 x 22.23 (7/8)
230 x 1.9 x 22.23 (7/8)
13,300
13,300
12,200
12,200
10,200
8,600
6,600
25
25
25
25
25
25
25
3
The thin wheels from PFERD
Universal Line PS-FORTE
Soft, multipurpose tool of hardness L with
high cutting performance and long tool life,
for reduced heat build-up during cutting.
INOX
Abrasive: Aluminium oxide A
Manufactured without addition of ferrous,
chlorinated and sulphurous fillers.
Recommendations for use:
■■For fast, easy cutting with minimized burr
formation
■■Suitable for use on angle grinders of all
output categories
PFERDERGONOMICS®:
Materials to be worked:
Stainless steel (INOX)
EHT
Description
Flat type EHT (shape 41)
EHT 115-1,0 A 60 L PSF-INOX/22,23
EHT 115-1,6 A 46 L PSF-INOX/22,23
EHT 125-1,0 A 60 L PSF-INOX/22,23
EHT 125-1,6 A 46 L PSF-INOX/22,23
Stone/aluminium/non-ferrous metals
Applications:
Cutting of sheet metal, profiles and solid
material
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
957400
957516
957523
957530
41 A 60 L BF 80
41 A 46 L BF 80
41 A 60 L BF 80
41 A 46 L BF 80
115 x 1.0 x 22.23 (7/8)
115 x 1.6 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
125 x 1.6 x 22.23 (7/8)
13,300
13,300
12,200
12,200
Medium-hard, multipurpose tool of hardness P
(C) with high cutting performance and long
tool life.
Abrasive: Silicon carbide C
Materials to be worked:
Natural stone, synthetic stone, fire-resistant
stone, aluminium, non-ferrous metals
25
25
25
25
Recommendations for use:
■■For fast, easy cutting with minimized burr
formation
■■Suitable for use on angle grinders of all
output categories
PFERDERGONOMICS®:
Applications:
Cutting of solid material
EHT
Description
Flat type EHT (shape 41)
EHT 115-1,0 C 60 P PSF/22,23
EHT 115-1,6 C 46 P PSF/22,23
EHT 125-1,0 C 60 P PSF/22,23
EHT 125-1,6 C 46 P PSF/22,23
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
669310
669297
804278
804308
41 C 60 P BF 80
41 C 46 P BF 80
41 C 60 P BF 80
41 C 46 P BF 80
115 x 1.0 x 22.23 (7/8)
115 x 1.6 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
125 x 1.6 x 22.23 (7/8)
13,300
13,300
12,200
12,200
Clamping flanges
Clamping flange set for cut-off wheels
Special flange dia. 76 mm of tool steel for
drive spindles M14 or 5/8". Increases lateral
stability and improves power transmission on
cut-off wheels.
Recommendations for use:
■■The use of large clamping flanges (SFS 76)
increases the lateral stability and ensures
accurate wheel guidance, in particular for
thin cut-off wheels of the flat type with dia.
178 or 230 mm
Description
EAN
4007220
Flange dia.
[mm]
SFS 76 M14
SFS 76 5/8“
595275
895856
76
76
4
1
1
25
25
25
25
The thin wheels from PFERD
Performance Line SG-ELASTIC
Hard, high-performance tool of hardness S
with high cutting performance and very long
tool life.
Abrasive: Aluminium oxide A
Materials to be worked:
Steel
Applications:
Cutting of sheet metal, profiles and solid
material
Recommendations for use:
■■For fast, easy cutting with minimized burr
formation
■■Suitable for use on angle grinders of all
output categories
■■The use of large clamping flanges (SFS 76,
page 4) increases the lateral stability and
ensures precise wheel guidance, in particular
for thin cut-off wheels of the flat type with
dia. 178 and 230 mm
Steel
PFERDERGONOMICS®:
EHT
Description
Flat type EHT (shape 41)
EHT 105-1,0 A 60 S SG/16,0
EHT 115-1,0 A 60 S SG/22,23
EHT 115-1,6 A 46 S SG/22,23
EHT 125-1,0 A 60 S SG/22,23
EHT 125-1,6 A 46 S SG/22,23
EHT 150-1,6 A 46 S SG/22,23
EHT 178-1,6 A 46 S SG/22,23
EHT 230-1,9 A 46 S SG/22,23
Hard, high-performance tool of hardness R
(INOX) with high cutting performance and very
long tool life for reduced heat build-up during
cutting.
Abrasive: Aluminium oxide A
Manufactured without addition of ferrous,
chlorinated and sulphurous fillers.
Materials to be worked:
Stainless steel (INOX)
Applications:
Cutting of sheet metal, profiles and solid
material
Description
Flat type EHT (shape 41)
EHT 100-1,0 A 60 R SG-INOX/16,0
EHT 105-1,0 A 60 R SG-INOX/16,0
EHT 105-1,3 A 60 R SG-INOX/16,0
EHT 115-1,0 A 60 R SG-INOX/22,23
EHT 115-1,6 A 46 R SG-INOX/22,23
EHT 125-1,0 A 60 R SG-INOX/22,23
EHT 125-1,6 A 46 R SG-INOX/22,23
EHT 150-1,6 A 46 R SG-INOX/22,23
EHT 178-1,6 A 46 R SG-INOX/22,23
EHT 230-1,9 A 46 R SG-INOX/22,23
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
953358
499719
522813
499740
522691
953365
581155
581162
41 A 60 S BF 80
41 A 60 S BF 80
41 A 46 S BF 80
41 A 60 S BF 80
41 A 46 S BF 80
41 A 46 S BF 80
41 A 46 S BF 80
41 A 46 S BF 80
105 x 1.0 x 16.0 (5/8)
115 x 1.0 x 22.23 (7/8)
115 x 1.6 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
125 x 1.6 x 22.23 (7/8)
150 x 1.6 x 22.23 (7/8)
178 x 1.6 x 22.23 (7/8)
230 x 1.9 x 22.23 (7/8)
14,500
13,300
13,300
12,200
12,200
10,200
8,600
6,600
Recommendations for use:
■■For fast, easy cutting with minimized burr
formation
■■Suitable for use on angle grinders of all
output categories
■■The use of large clamping flanges (SFS 76,
page 4) increases lateral stability and ensures accurate wheel guidance, in particular
for thin cut-off wheels of the flat type with
dia. 178 and 230 mm
25
25
25
25
25
25
25
25
INOX
PFERDERGONOMICS®:
EHT
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
511787
953372
953396
499702
355442
499733
355459
581179
807729
807736
41 A 60 R BF 80
41 A 60 R BF 80
41 A 60 R BF 80
41 A 60 R BF 80
41 A 46 R BF 80
41 A 60 R BF 80
41 A 46 R BF 80
41 A 46 R BF 80
41 A 46 R BF 80
41 A 46 R BF 80
100 x 1.0 x 16.0 (5/8)
105 x 1.0 x 16.0 (5/8)
105 x 1.3 x 16.0 (5/8)
115 x 1.0 x 22.23 (7/8)
115 x 1.6 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
125 x 1.6 x 22.23 (7/8)
150 x 1.6 x 22.23 (7/8)
178 x 1.6 x 22.23 (7/8)
230 x 1.9 x 22.23 (7/8)
15,300
14,500
14,500
13,300
13,300
12,200
12,200
10,200
8,600
6,600
25
25
25
25
25
25
25
25
25
25
5
The thin wheels from PFERD
Performance Line SG-ELASTIC
Medium-hard, high-performance tool of hardness Q (INOX) with high cutting performance
and long tool life.
INOX
Abrasives: Aluminium oxide A
Manufactured without addition of ferrous,
chlorinated and sulphurous fillers.
Materials to be worked:
Stainless steel (INOX)
EHT
Applications:
Cutting of sheet metal, profiles and solid
material
Recommendations for use:
■■For fast, easy cutting with minimized burr
formation
■■For use on angle grinders of all output
categories
■■The use of large clamping flanges (SFS 76,
page 4) increases lateral stability and ensures accurate wheel guidance, in particular
for thin cut-off wheels of the flat type with
dia. 178 mm.
PFERDERGONOMICS®:
Description
Flat type EHT (shape 41)
EHT 115-1,0 A 60 Q SG-INOX/22,23
EHT 115-1,6 A 46 Q SG-INOX/22,23
EHT 125-1,0 A 60 Q SG-INOX/22,23
EHT 125-1,6 A 46 Q SG-INOX/22,23
EHT 178-1,6 A 46 Q SG-INOX/22,23
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
957547
957554
957561
957578
957585
41 A 60 Q BF 80
41 A 46 Q BF 80
41 A 60 Q BF 80
41 A 46 Q BF 80
41 A 46 Q BF 80
115 x 1.0 x 22.23 (7/8)
115 x 1.6 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
125 x 1.6 x 22.23 (7/8)
178 x 1.6 x 22.23 (7/8)
13,300
13,300
12,200
12,200
8,600
Soft, high-performance tool of hardness N
with high cutting performance and very long
tool life.
Aluminium/non-ferrous metals
Contains no fillers that could leave undesirable
residues on the workpiece. The surface can
therefore be welded immediately.
Abrasive: Aluminium oxide A
Materials to be worked:
Tough and hard aluminium, non-ferrous metals
EHT
Description
Flat type EHT (shape 41)
EHT 100-1,0 A 60 N SG-ALU/16,0
EHT 115-1,0 A 60 N SG-ALU/22,23
EHT 115-1,6 A 46 N SG-ALU/22,23
EHT 125-1,0 A 60 N SG-ALU/22,23
EHT 125-1,6 A 46 N SG-ALU/22,23
EHT 150-1,6 A 46 N SG-ALU/22,23
EHT 178-1,6 A 46 N SG-ALU/22,23
6
Applications:
Cutting of sheet metal, profiles and solid
material
25
25
25
25
25
Recommendations for use:
■■For fast, easy cutting with minimized burr
formation
■■Suitable for use on angle grinders of all
output categories
■■The use of large clamping flanges (SFS 76,
page 4) increases the lateral stability and ensures accurate wheel guidance, in particular
for thin cut-off wheels of the flat type with
dia. 178 mm
PFERDERGONOMICS®:
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
885222
804964
804988
804995
805008
953426
805015
41 A 60 N BF 80
41 A 60 N BF 80
41 A 46 N BF 80
41 A 60 N BF 80
41 A 46 N BF 80
41 A 46 N BF 80
41 A 46 N BF 80
100 x 1.0 x 16.0 (5/8)
115 x 1.0 x 22.23 (7/8)
115 x 1.6 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
125 x 1.6 x 22.23 (7/8)
150 x 1.6 x 22.23 (7/8)
178 x 1.6 x 22.23 (7/8)
15,300
13,300
13,300
12,200
12,200
10,200
8,600
25
25
25
25
25
25
25
The thin wheels from PFERD
Special Line SG-PLUS
Very hard, extremely resistant highperformance tool of hardness T with very
high cutting performance and outstanding
tool life.
Abrasive: Aluminium oxide A
Materials to be worked:
Steel
Applications:
Cutting of sheet metal, profiles and solid
material
Recommendations for use:
■■For fast, easy cutting with minimized burr
formation
■■Achieves best cutting results on highperformance angle grinders
Steel
PFERDERGONOMICS®:
EHT
Description
Flat type EHT (shape 41)
EHT 105-1,0 A 60 T SGP/16,0
EHT 115-1,0 A 60 T SGP/22,23
EHT 125-1,0 A 60 T SGP/22,23
EHT 150-1,6 4 46 T SGP/22,23
Hard, extremely resistant high-performance
tool of hardness S (INOX) with very high cutting performance and outstanding tool life.
Abrasive: Aluminium oxide A
Manufactured without addition of ferrous,
chlorinated or sulphurous fillers.
Materials to be worked:
Stainless steel (INOX)
Applications:
Cutting of sheet metal, profiles and solid
material
Recommendations for use:
■■X-SLIM® type (0.8 mm) for very fast, cool
and particularly thin cuts with minimized
burr formation. Ergonomic and convenient
with a high degree of safety.
Description
Flat type EHT (shape 41)
EHT 100-0,8 A 60 S SGP-INOX X-SLIM/16,0
EHT 100-1,0 A 60 S SGP-INOX/16,0
EHT 105-0,8 A 60 S SGP-INOX X-SLIM/16,0
EHT 105-1,0 A 60 S SGP-INOX/16,0
EHT 115-0,8 A 60 S SGP-INOX X-SLIM/22,23
EHT 115-1,0 A 60 S SGP-INOX/22,23
EHT 115-1,6 A 46 S SGP-INOX/22,23
EHT 125-0,8 A 60 S SGP-INOX X-SLIM/22,23
EHT 125-1,0 A 60 S SGP-INOX/22,23
EHT 125-1,6 A 46 S SGP-INOX/22,23
EHT 150-1,6 A 46 S SGP-INOX/22,23
EHT 178-1,6 A 46 S SGP-INOX/22,23
EHT 230-1,9 A 46 S SGP-INOX/22,23
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
953440
538043
538050
953457
41 A 60 T BF 80
41 A 60 T BF 80
41 A 60 T BF 80
41 A 46 T BF 80
105 x 1.0 x 16.0 (5/8)
115 x 1.0 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
150 x 1.6 x 22.23 (7/8)
14,500
13,300
12,200
10,200
■■Wheel thicknesses 1.9/1.6/1.0 mm for cool,
fast, convenient cutting with minimized burr
formation and maximum tool life
■■Achieves best cutting results on highperformance angle grinders
■■Disc thickness 1.0 mm, ideal for use
on battery-powered angle grinders
■■The use of large clamping flanges (SFS 76,
page 4) increases the lateral stability and ensures accurate wheel guidance, in particular
for thin cut-off wheels of the flat type with
dia. 178 and 230 mm
INOX
EHT
PFERDERGONOMICS®:
25
25
25
25
EAN
4007220
EN designation
D x T/U x H
[mm (inch)]
Max. perm.
speed
[RPM]
845103
538067
953464
953471
835357
538074
538081
835364
538098
538104
953488
357873
522776
41 A 60 S BF 80
41 A 60 S BF 80
41 A 60 S BF 80
41 A 60 S BF 80
41 A 60 S BF 80
41 A 60 S BF 80
41 A 46 S BF 80
41 A 60 S BF 80
41 A 60 S BF 80
41 A 46 S BF 80
41 A 46 S BF 80
41 A 46 S BF 80
41 A 46 S BF 80
100 x 0.8 x 16.0 (5/8)
100 x 1.0 x 16.0 (5/8)
105 x 0.8 x 16.0 (5/8)
105 x 1.0 x 16.0 (5/8)
115 x 0.8 x 22.23 (7/8)
115 x 1.0 x 22.23 (7/8)
115 x 1.6 x 22.23 (7/8)
125 x 0.8 x 22.23 (7/8)
125 x 1.0 x 22.23 (7/8)
125 x 1.6 x 22.23 (7/8)
150 x 1.6 x 22.23 (7/8)
178 x 1.6 x 22.23 (7/8)
230 x 1.9 x 22.23 (7/8)
15,300
15,300
14,500
14,500
13,300
13,300
13,300
12,200
12,200
12,200
10,200
8,600
6,600
25
25
25
25
25
25
25
25
25
25
25
25
25
7
4 007220 838457
819 147
03/2014
Subject to technical modifications.
Printed in Germany.
ARGENTINA AUSTRALIA
BELGIË BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE
STA RICA DANMARK DEUTSCHLAND REPÚBLICA DOMINICANA ECUADOR EL SALVADOR EE
UOMI FRANCE ΕΛΛΆΔΑ UNITED KINGDOM GUATEMALA 香港 भारत INDONESIA
ÉIRE Í
ND
ITALIA 日本 CANADA ҚАЗАҚСТАН COLOMBIA 조선 한국 KOSOVA HRVATSKA CUB
ATVIJA
LIETUVA MALAYSIA MÉXICO NEW ZEALAND NICARAGUA NEDERLAND NORGE
TERREICH PANAMÁ
PERÚ PILIPINAS POLSKA PORTUGAL ROMÂNIA РОССИЯ SVERI
‎ SCHWEIZ СРБИЈА SINGAPORE SLOVENSKO SLOVENIJA ESPAÑA SUID A
中華民國 ราชอาณาจ ักรไทย ČESKÁ REPUBLIKA TÜRKIYE УКРАЇНА MAGYARORSZÁG URUGU
‎ UNITED STATES OF AMERICA VENEZUELA ARGENTINA AUSTRALIA
QUE BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE COSTA RICA DANMARK DEUTSCHLA
ÚBLICA DOMINICANA ECUADOR EL SALVADOR EESTI SUOMI FRANCE ΕΛΛΆΔΑ UNITED KI
GUATEMALA 香港 भारत INDONESIA
ÉIRE ÍSLAND
ITALIA 日本 CANADA ҚАЗАҚС
LOMBIA 조선 한국 KOSOVA HRVATSKA CUBA LATVIJA
LIETUVA MALAYSIA MÉXICO NE
AND NICARAGUA NEDERLAND NORGE ÖSTERREICH PANAMÁ
PERÚ PILIPINAS POL
RTUGAL ROMÂNIA РОССИЯ SVERIGE
‎ SUISSE СРБИЈА SINGAPORE S
SKO SLOVENIJA ESPAÑA SUID AFRIKA 中華民國 ราชอาณาจ ักรไทย ČESKÁ REPUBLIKA TÜRK
АЇНА MAGYARORSZÁG URUGUAY
‎ UNITED STATES OF AMERICA VENE
RGENTINA AUSTRALIA
BELGIË BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE CO
A DANMARK DEUTSCHLAND REPÚBLICA DOMINICANA ECUADOR EL SALVADOR EESTI SUO
ANCE ΕΛΛΆΔΑ UNITED KINGDOM GUATEMALA 香港 भारत INDONESIA
ÉIRE ÍSLAND
A 日本 CANADA ҚАЗАҚСТАН COLOMBIA 조선 한국 KOSOVA HRVATSKA CUBA LATVIJA
A MALAYSIA MÉXICO NEW ZEALAND NICARAGUA NEDERLAND NORGE ÖSTERREICH PANA
PERÚ PILIPINAS POLSKA PORTUGAL ROMÂNIA РОССИЯ SVERIGE
ZERA СРБИЈА SINGAPORE SLOVENSKO SLOVENIJA ESPAÑA SUID AFRIKA 中華民國 ราชอาณ
ČESKÁ REPUBLIKA TÜRKIYE УКРАЇНА MAGYARORSZÁG URUGUAY
‎ UN
ES OF AMERICA VENEZUELA ARGENTINA AUSTRALIA
BELGIQUE BOSNA I HERCEGO
SIL БЪЛГАРИЯ CHILE COSTA RICA DANMARK DEUTSCHLAND REPÚBLICA DOMINICANA EC
EL SALVADOR EESTI SUOMI FRANCE ΕΛΛΆΔΑ UNITED KINGDOM GUATEMALA 香港 भारत
NESIA
ÉIRE ÍSLAND
ITALIA 日本 CANADA ҚАЗАҚСТАН COLOMBIA 조선 한국 KOSO
TSKA CUBA LATVIJA
LIETUVA MALAYSIA MÉXICO NEW ZEALAND NICARAGUA NEDER
GE ÖSTERREICH PANAMÁ
PERÚ PILIPINAS POLSKA PORTUGAL ROMÂNIA РОССИЯ S
‎ SCHWEIZ СРБИЈА SINGAPORE SLOVENSKO SLOVENIJA ESPAÑA SUID
中華民國 ราชอาณาจ ักรไทย ČESKÁ REPUBLIKA TÜRKIYE УКРАЇНА MAGYARORSZÁG URUG
‎ UNITED STATES OF AMERICA VENEZUELA ARGENTINA AUSTRALIA
B
A I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE COSTA RICA DANMARK DEUTSCHLAND REPÚ
MINICANA ECUADOR EL SALVADOR EESTI SUOMI FRANCE ΕΛΛΆΔΑ UNITED KINGDOM GU
A 香港 भारत INDONESIA
ÉIRE ÍSLAND
ITALIA 日本 CANADA ҚАЗАҚСТАН COLOMB
국 KOSOVA HRVATSKA CUBA LATVIJA
LIETUVA MALAYSIA MÉXICO NEW ZEALAND NIC
NEDERLAND NORGE ÖSTERREICH PANAMÁ
PERÚ PILIPINAS POLSKA PORTUGAL RO
РОССИЯ SVERIGE
‎ SUISSE СРБИЈА SINGAPORE SLOVENSKO SLOVEN
AÑA SUID AFRIKA 中華民國 ราชอาณาจ ักรไทย ČESKÁ REPUBLIKA TÜRKIYE УКРАЇНА MAGY
ÁG URUGUAY
‎ UNITED STATES OF AMERICA VENEZUELA ARGENTINA
LIA
BELGIQUE BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ CHILE COSTA RICA DANM
TSCHLAND REPÚBLICA DOMINICANA ECUADOR EL SALVADOR EESTI SUOMI FRANCE ΕΛΛ
ED KINGDOM GUATEMALA 香港 भारत INDONESIA
ÉIRE ÍSLAND
ITALIA 日本 CAN
ҚСТАН COLOMBIA 조선 한국 KOSOVA HRVATSKA CUBA LATVIJA
LIETUVA MALAYSIA
EW ZEALAND NICARAGUA NEDERLAND NORGE ÖSTERREICH PANAMÁ
PERÚ PILIP
SKA PORTUGAL ROMÂNIA РОССИЯ SVERIGE
‎ SVIZZERA СРБИЈА SIN
E SLOVENSKO SLOVENIJA ESPAÑA SUID AFRIKA 中華民國 ราชอาณาจ ักรไทย ČESKÁ REPUBL
KIYE УКРАЇНА MAGYARORSZÁG URUGUAY
‎ UNITED STATES OF AMER
ZUELA ARGENTINA AUSTRALIA
BELGIË BOSNA I HERCEGOVINA BRASIL БЪЛГАРИЯ
A RICA DANMARK DEUTSCHLAND REPÚBLICA DOMINICANA ECUADOR EL SALVADOR EES
RANCE ΕΛΛΆΔΑ UNITED KINGDOM GUATEMALA 香港 भारत INDONESIA
ÉIRE ÍSLAND
A 日本 CANADA ҚАЗАҚСТАН COLOMBIA 조선 한국 KOSOVA HRVATSKA CUBA LATVIJA
A MALAYSIA MÉXICO NEW ZEALAND NICARAGUA NEDERLAND NORGE ÖSTERREICH PANA
PERÚ PILIPINAS POLSKA PORTUGAL ROMÂNIA РОССИЯ SVERIGE
WEIZ СРБИЈА SINGAPORE SLOVENSKO SLOVENIJA ESPAÑA SUID AFRIKA 中華民國 ราชอาณ
ČESKÁ REPUBLIKA TÜRKIYE УКРАЇНА MAGYARORSZÁG URUGUAY
‎ UN
www.pferd.com
·
[email protected]
ES OF8AMERICA VENEZUELA ARGENTINA AUSTRALIA
BELGIQUE BOSNA I HERCEGO
PFERD quality certified according to ISO 9001.
SIL БЪЛГАРИЯ CHILE COSTA RICA DANMARK
DEUTSCHLAND REPÚBLICA DOMINICANA EC