GALLANT - Florida Tile

GALLANT
Glazed Porcelain Floor and Ceramic Wall Tile
BOTTICINO BIANCO
Shown: 26130 9x18 & 18x18 Botticino Bianco
26130 18x18
Botticino Bianco
26130 9x18
Botticino Bianco
26130/CR2x9 & 26130/CRS2x1
Botticino Bianco Chair Rail & Stop
26133/L1.3x9
Plaza Bianco Listello
26130/M12
Botticino Bianco
BOTTICINO CLASSICO
Shown: 26126 18x18 Botticino Classico
26126 18x18
Botticino Classico
26126 9x18
Botticino Classico
26126/CR2x9 & 26126/CRS2x1
Botticino Classico Chair Rail & Stop
26134/L1.3x9
Plaza Classico Listello
26126/M12
Botticino Classico
TRAVERTINO BIANCO
Shown: 26125 18X18 Travertino Bianco
26125 18x18
Travertino Bianco
26125 9x18
Travertino Bianco
26125/CR2x9 & 26125/CRS2x1
Travertino Bianco Chair Rail & Stop
26127/L2x9
Royale Bianco Listello
26125/M12
Travertino Bianco
ONICE
Shown: 26132 18x18 Onice
26132 18x18
Onice
26132 9x18
Onice
26132/CR2x9 & 26132/CRS2x1
Onice Chair Rail & Stop
26136/L2.5x9
Deluxe Onice Listello
26132/M12
Onice
CARRARA
Shown: 26101 9x18 & 18x18 Carrara
26101 18x18
Carrara
26101 9x18
Carrara
26101/CR2x9 & 26101/CRS2x1
Carrara Chair Rail & Stop
26135/L2.5x9
Deluxe Carrara Listello
26101/M12
Carrara
NAVONA
Shown: 26124 18x18 Navona
26124 18x18
Navona
26124/CR2x9 & 26124/CRS2x1
Navona Chair Rail & Stop
26124 9x18
Navona
26128/L2x9
Royale Beige Listello
26124/M12
Navona
Shown: 26132 9x18 & 18x18 Onice
B Y Typical Uses
GallantHDP glazed porcelain floor and ceramic wall tile is appropriate for all
residential and commercial, wall, countertop and backsplash applications and
all residential floor applications. Ceramic wall tile appropriate for all interior
wall, countertop and backsplash applications.
Notice: Not all flooring products are suitable for wet areas, specialized
applications or commercial use. Please refer to the American National Standard
Specifications for Ceramic Tile (ANSI A137.1) for ceramic, stone and glass
installation for specific usage and installation information.
This Florida Tile product will contribute to USGBC LEED points and the ANSI
approved NAHB Green Building Points.
Properties
(Floor)
ASTM
ANSI
Results¹
DCOF AcuTest2
A137.1
≥0.42
Fail
As reported3
Class IV
Visible Abrasion Resistance C-1027
Glaze Hardness
Mohs Scale N/A
5 Mohs
Break Strength
C-648
250 lbs.
Pass
Water Absorption
C-373
≤0.5%
≤0.5%
These tests are performed by a 3rd party testing lab using industry standard equipment and techniques.
Values are offered in good faith as being accurate and typical of normal production. Due to the natural
variation of raw materials and manufacturing processes, the values of the purchased product for any
particular installation may vary.
2
ANSI A137.1 standard, ceramic tiles selected for level interior spaces expected to be walked upon when wet
must have a minimum wet DCOF AcuTest value of 0.42.
3
Class 0 Not recommended for floors, Class I Light Residential, Class II Residential, Class III Heavy Residential or
Light Commercial, Class IV Commercial, Class V Heavy Commercial.
1
Field Tile
Nominal Size¹
Metric (cm)
9” x 18”
22 x 45
.88
9mm
18” x 18”
45 x 45
.44
9mm
1
2
3
Pcs./Sq Ft2
Thickness3
These values may vary from lot to lot.
These values are based on actual sizes including the grout joint.
May not apply to textured surfaces or tiles with uneven back patterns.
Trim
Shape
SKU
Nominal Size
Metric (cm)
Bullnose
P43H9
3” x 18”
7.5 x 45
Bullnose
S4399
3” x 9”
7.5 x 22.5
Outside Corner
SN4339
3” x 3”
7.5 x 7.5
Color Variations
Color reproductions in this printed piece may vary from actual tile colors. Final
selection should be made from actual tile samples.
V2 = Slight Variation
Distinguishable differences in texture and/or pattern
with similar colors.
Shown on front: 26101 9x18 & 18x18 Carrara
#48847R 8/15
www.floridatile.com
&
are registered trademarks in the U.S. of Florida Tile, Inc.© 2015