0136 - 1 Hawk - In-Residence Water Metering System HW and CW

Transcription

Submittal
Transmittal
GGLO | 1301 First Ave. Suite 301 Seattle WA 98101 United States
PROJECT
Skanska: Alley 111
DATE SENT
8/5/2014
2012033.00
SUBJECT
In Residence Water Metering
System (HW & CW)
SUBMITTAL ID
221100-0136-1
TYPE
Submittal
TRANSMITTAL ID
01211
PURPOSE
Furnish as Corrected
VIA
Info Exchange
SPEC SECTION:
22 10 00
FROM
NAME
COMPANY
EMAIL
PHONE
Kevin Reed
GGLO
[email protected]
206-902-5420
NAME
COMPANY
EMAIL
PHONE
Albert Martin
Skanska USA
Building Inc.
[email protected]
m
+1 (206) 7138702
TO
REMARKS:
Response (Reviewed) from: Steven Huff (Rushing Company)
Remarks:
See attached.
Response (Reviewed) from: Kevin Reed (GGLO)
Remarks:
GGLO comments:
See following pages for Rushing response memo.
CONTENTS
QUANTITY:
1
DATED:
8/5/2014
NUMBER:
DESCRIPTION:
221100-0136-1 - In-Residence Water Metering System response.pdf
ACTION:
Reviewed
REMARKS:
COPIES:
Albert Martin
(Skanska USA Building Inc.)
Page 1 of 2
Submittal Transmittal
DATE:
ID:
Andrea Smith
Christian Gunter
Dale Smith
Jessie Scott
Jim Bradford
Kevin Reed
Margot vanSwearingen
Sean Williams
Stewart Germain
Terry Bendrick
Tom Leptich
David Price
Scott Rushing
Steven Huff
8/5/2014
01211
(Skanska USA Building)
(SKANSKA USA Commercial)
(GGLO)
(GGLO)
(Skanska)
(Rushing Co)
(Rushing Company)
(Rushing Company)
Page 2 of 2
Submittal Transmittal
Detailed, Grouped by Each Number
Alley 111 Apartments
Date:
Project # 4212049-000
Tel:
Fax:
7/21/2014
Transmitted To:
Skanska USA Building Inc.
Reference Number: 0257
Transmitted By:
Kevin Reed
GGLO
1301 First Avenue Suite 301
Seattle, WA 98101
Tel: (206) 467-5828
Albert Martin
Skanska USA Building Inc.
929 109th Ave NE
Bellevue, WA 98004
Qty
Submittal Package No
Description
Due Date
1
0136 - 221100 - 1
In-Residnece Water Metering System (HW & CW) 8/4/2014
Transmitted For
Delivered Via
Approval
Email
Items
Qty
Description
Tracking Number
Notes
Item Action
In-Residence Water Metering
System
0001
Cc:
Package Action
Company Name
Contact Name
Copies Notes
Remarks
Please see the attached submittal for your review.
Prolog Manager
Printed on: 7/21/2014
Signature
Signed Date
6WEST
Page 1
Hawk Mechanical
Alley 111
Submittal Log - Hawk Job #: 1651
7/18/2014
Submittal Status
Section
221100
221100
Sub-Section
Tag
Facility Water Distribution Systems
2.20
-
Description
In-Residence Water Metering System (HW & CW)
SKANSKA USA BUILDING INC.
Date Rec'd To Arch From Arch Returned
10/29/2013
7/18/2014
✔
10/29/2013
7/21/2014
8/5/2014
8/5/2014
REVIEWED
CORRECTIONS NOTED
REVISE AND RESUBMIT
This submittal REVIEW shall not be construed as a
Complete check and indicates only that information
presented conforms Generally to the Contract
Documents. In no case is Subcontractor or Supplier
Relieved of full responsibility for adherence to the
Contract Document and Satisfactory construction of
all work. Submitted to Owner, Architect-Engineer
for final approval.
Manufacturer
Model #
Approval Status
Submitted
Revision
Minol
Minomess 130, 3/4"
Proposed
7/18/2014
2
✔ Reviewed
Rejected
Submit Specific Item
Furnish as Corrected
Revise and Resubmit
This review is only for general conformance with the
architectural design concept of the project and general
compliance with the information given in the
Architectural Contract Documents. Corrections or
comments made on the submittal during this review
do not relieve contractor from compliance with the
requirements of the plans and specifications.
Approval of a specific item shall not include approval
of an assembly of which the item is a component.
Contractor is responsible for: confirming and
correlating all quantities and dimensions; information
that pertains solely to the fabrication processes or to
the means, methods, techniques, sequences, and
procedures of construction; coordination of his or her
Work with that of all other trades; and for performing
all work in a safe and satisfactory manner.
GGLO
Architecture | Interior Design | Landscape Architecture |
Planning & Urban Design, LLC
Name: Albert Martin
Date: 7/21/2014
Submittal #: 221100-0136-1 - In Residence Water
1301 First Ave.
Suite 301
Metering Systems (HW & CW)
Seattle, WA
98101
Phone 206-467-5828
Fax 206-467-0627
Date: 8/5/2014
By: Kevin Reed
Returned
See following pages for Rushing response memo.
SUBMITTAL REVIEW COVERSHEET
Project Name:
Date:
Submittal No &
Description
Alley 111
2014-08-04
Rev 0: Submittal #221100-0136-0 – In-Residence Water
Metering System (HW & CW)
Rev 1: Submittal #221100-0136-1 – In Residence Water
Metering System (HW & CW)
2014-07-23
Submittal Date:
1725 Westlake Avenue N.
Suite 300
Seattle, WA 98109
206-285-7100
Submittal Status:
No Exception Taken (NET)
Exception Taken as Noted, Provide Revised Submittal for Project Records, No Add’l Rushing Review Req’d (ET)
Exception Taken as Noted, Revise and Resubmit as Noted for Rushing Review (ET-RR)
Review is only for general conformance with the project design concepts and general compliance
with the information given in the contract documents. The contractor remains responsible for full
compliance with the contract drawings and specifications, confirmation of all project specific
dimensions, fabrication processes, techniques of construction, coordination of work with that of all
other trades, and the satisfactory performance of their work.
Revision History:
Rev 0
Rev 1
2014-06-25
2014-08-04
By: Steven Huff
E-mail: [email protected]
Comments:
General note: No exception taken with submitted products unless specifically noted
0-1
below.
Minol brand Minomess 130 meters have been submitted in lieu of the Norgas NMT
SingleMag meters listed in the specifications. Minol Minomess meters do not appear to
have NTEP or CTEP certification and would not be equivalent to Norgas NMT meters
specified.
Owner to confirm that the submitted alternate water meters and any associated cost
0-2
savings are acceptable. No resubmittal required if owner confirms meter system is
acceptable.
2014-07-23 Updated Submittal: Submittal has been revised to include the Norgas NMT
water meters as specified in the project dobuments. No exception taken, item is
closed.
Minol brand water meters are noted as ANSI/ NSF 61 certified. Contractor to confirm
that meters are also certified Lead Free (NSF 372 compliant) in accordance with updated
0-3 federal guidelines for lead content.
2014-07-23 Updated Submittal: Plumbing contractor has confirmed that meters meet
lead free requirements. Item is closed.
The submittal does not include equipment sheets for the Data Collection Device
responsible for collecting and communicating the information from the building meters
(DCC described on submittal proposal page).
0-4
2014-07-23 Updated Submittal: Submittal has been updated to include equipment cut
sheets for the remote data logging device, wireless transmitter, and wireless repeater.
No exception taken with submitted products, item is closed.
END OF REVIEW
Status
INFO
ET-RR
NET
ET
NET
ET-RR
NET
SUBMITTAL REVIEW COVERSHEET
Project Name:
Date:
Submittal No &
Description
Submittal Date:
Alley 111
2014-06-25
Submittal #221100-0136-0 – In-Residence Water Metering
System (HW & CW)
2014-06-19
1725 Westlake Avenue N.
Suite 300
Seattle, WA 98109
206-285-7100
Submittal Status:
No Exception Taken (NET)
Exception Taken as Noted, Provide Revised Submittal for Project Records, No Add’l Rushing Review Req’d (ET)
Exception Taken as Noted, Revise and Resubmit as Noted for Rushing Review (ET-RR)
Review is only for general conformance with the project design concepts and general compliance
with the information given in the contract documents. The contractor remains responsible for full
compliance with the contract drawings and specifications, confirmation of all project specific
dimensions, fabrication processes, techniques of construction, coordination of work with that of all
other trades, and the satisfactory performance of their work.
Revision History:
Rev 0
2014-06-25
By: Steven Huff
E-mail: [email protected]
Comments:
Status
General note: No exception taken with submitted products unless specifically noted
0-1
INFO
below.
Minol brand Minomess 130 meters have been submitted in lieu of the Norgas NMT
SingleMag meters listed in the specifications. Minol Minomess meters do not appear to
have NTEP or CTEP certification and would not be equivalent to Norgas NMT meters
0-2 specified.
ET-RR
Owner to confirm that the submitted alternate water meters and any associated cost
savings are acceptable. No resubmittal required if owner confirms meter system is
acceptable. Hawk-Changed water meter type to a certified unit
Minol brand water meters are noted as ANSI/ NSF 61 certified. Contractor to confirm
0-3 that meters are also certified Lead Free (NSF 372 compliant) in accordance with updated
ET
federal guidelines for lead content. Hawk-Confirmed see attached certificate
The submittal does not include equipment sheets for the Data Collection Device
0-4 responsible for collecting and communicating the information from the building meters
ET-RR
(DCC described on submittal proposal page). Hawk-See data collection device attached
END OF REVIEW
221000 - Facility Water Distribution
July 17, 2014
I
2.20 - Residence Water Meters
Installation Proposal – Hot/ Cold Water
Dear Steve
Thank you in advance for allowing Minol the opportunity to present this water submetering proposal
for Alley 111.
Minol pioneered the submetering industry more than 50 years ago. Today, we offer a broad range of
metering and installation services for electric, water and gas. With Minol’s Installation Program you
can take confidence in knowing that our technicians are highly-trained in the latest metering
technologies. Our team can service and manage virtually any existing meter system, as well as retrofit
properties for metering services. The Minol Service Team is the second largest, in-house field
operations team, servicing and maintaining more than 500,000 meter points each month nationwide.
Minol understands that you have many choices when it comes to choosing a utility management
company. We have built upon our continued success in the submetering industry to develop additional
programs that maximize recovery across all areas of your business:
Meter Installation and Maintenance
Electric Gas Water
Utility Billing Solutions
Convergent Billing Electronic Data Exchange
Regulatory Compliance
Energy Management
Bill Auditing and Analysis
Bill Payment
Water Conservation
Water Saving Components Installation
Online Reporting and Account Access
Vacant Unit Cost Recovery
Recovery Analysis
Ongoing
Budget Planning
Pay Out of Savings
We look forward to an opportunity to work with you in establishing a Submetering Program that is
best suited for you. Please contact me at your earliest convenience for further information or to
answer any questions you may have.
Best Regards,
Phillip W Neeves
National Director of Multifamily Solutions
Minol USA
15280 Addison RD Suite 100
Addison, Texas 75001
Cell 719.304.4111
Fax 866-844-4777| toll free 855-241-0192
Email [email protected] | www.minolusa.com
Measure- Manage- Recover- Conserve
15280 Addison Road, Suite 100
Addison, TX 75001
Phone: 888.766.1253
Fax: 972.386.7711
minolusa.com
Minol Installation Proposal
We are proposing installation of the NORGAS Single Mag Polymar water meters as well as the
Inovonics AMR System. For Alley 111
Minol will Provide/Install:
Provide 259 cold, 259 Hot Water Meters Total 518 meters
Install 518 Echo Stream Wireless Transmitters.
Install 6 Intelligent Repeaters.
Install a dedicated sub metering base station RDL must be installed in a secure, climate
controlled location, typically in a Telecom Room.
Minol will Provide:
Programming and Installation of all the data collection system components, including connecting
and mounting transmitters to the meters, repeaters, and the base station RDL.
All testing and troubleshooting to insure system integrity.
Inventory report listing building number, tenant space, and corresponding equipment
serial numbers.
Idler Tubes and Meter Couplings for installation by the plumber.
Coordination of system specifications and requirements with Project Management and
other subcontractors.
All enclosures, and terminating devices required for completing the system configuration.
Owner will Provide:
A designated interior space for water meters. Please see specification sheets for dimensional
details.
A dedicated Ethernet connection for the Water submetering data collection device.
Monthly charge a ownership expense.
A secure location and adequate space to install the submetering data collection device (typically
located in a manager’s office, or mechanical/phone room).
Licensing, fees and permits are the responsibility of the owner.
The Plumber will Provide/Install:
A plumbing loop with sufficient length, clearance and support to accommodate the meter
and couplings. See attached specifications.
Transition fittings for connecting the threaded brass meter couplings to the piping.
Installation of the Idler tubes and brass couplings (supplied by Minol, L.P.) in the
plumbing loop.
Installation of a cutoff valve on the cold water supply side of each meter allowing shut-off
of water prior to installation of meter.
The Electrician will Provide/Install:
Installation of Ethernet connection provided by Owner within six (6) feet of the RDL A 120-VAC
dedicated outlet for the RDL within six (6) feet of this location.
A 120-VAC dedicated outlet for any Inovonics Repeaters located in the attic/breezeway
access where Minol has advised repeaters are to be located.
Exclusions:
Plumbing permits.
Electrical permits.
Addison, TX 75001
Phone: 888.766.1253
Fax: 972.386.7711
minolusa.com
Sub metering is typically covered by the electrical and plumbing permits provided by the
plumbing and electrical subcontractors.
Price:
Water Meters and System Installation for 259 units at the property named Alley 111
$215.00 per unit for 259 units 518 Meters for a total cost of $55,685.00
Does not Include Sales Tax
The pricing quoted above is in effect until July 31 2014. The pricing includes only items listed above and may be
subject to modification following a site visit and installation consultation by a Minol representative. All prior
negotiations or discussions involving pricing proposals are null and void. Minol reserves the right to amend,
modify, or withdraw this proposal at any time, without notice, prior to acceptance by Client. If Client requires use
of its own contract, any timeline requirements for contract execution requested by the Client will not be
acceptable or adhered to by Minol.
Owner/Agent for Owner
Minol
Print Name
Print Name
Date
Date
Accepted by:
About Minol
Founded in 1952, Minol is the third largest Metering, Billing, Conservation and Energy Management provider with
2,500 employees and 32 offices worldwide. We are a privately held, family-owned company with a 50-year history
of innovative metering technologies and consumption based billing of gas, electric, water and heating costs. As
the third largest utility billing provider, our global team produces more than 5.4 million bills annually for 30,000
clients.
We operate in all major markets providing services for more than 300,000 in the multifamily and military markets,
as well as commercial properties and government agencies.
We are proud to have achieved positive, strategic growth throughout our history. By partnering with Minol, you
can be confident that you are our priority. We will constantly strive to maximize the value of your investment by
continually identifying improvements and developing new opportunities that enhance your investment.
Addison, TX 75001
Phone: 888.766.1253
Fax: 972.386.7711
minolusa.com
TM
TM
TM
n
California Approved (CTEP)
- Both HOT & COLD
n
National Approved (NTEP)
- Both HOT & COLD
n
NSF-61-G
n
Meets AWWA C712-10
n
Pulse output
TM
The SingleMag 3/4" water meter is a durable, highly accurate meter that comes equipped with a pulse output
in a compact design. The Polymer composite material consists of a 50% nylon blend that has high strength with
good rigidity.
FEATURES: Magnetic drive, low torque register measuring in gallons. Register is also magnet resistant and dry
to prevent from moisture intrusion. Finger strainer installed to protect the meter from any incoming
debris. Rugged design for stable accuracy in aggressive environments. Horizontal installation only.
PULSE OUTPUT: Pulse output (contact closure) to interface with almost any wireless transmitter or remote
metering device.
MEASURING CHAMBER: .25 gpm low flow. Wide effective flow range. Dry free rotating register in durable
enclosure.
Technical Characteristics
Max Flow Rate ...........................................22 gpm
Nom Flow Rate...........................................11 gpm
Min Flow Rate(+/- 3%)................................¼ gpm
Max Work Pressure.....................................150 psi
Max Work Temp .............105°F (Cold), 160°F (Hot)
Nom Pipe Size...................................................¾”
Pulse Value...............................................1/10gal
TYPE
Single
Jet
SIZE
22
gpm
L
5”
B
3”
H
3½”
CONNECTION
¾”
WEIGHT
1.5lbs.
“The SingleMag Water Meter is an accurate, reliable, cost effective solution
for residential utility billing.”
©2009-2012 Norgas Metering Technologies, Inc.
473 Commercial Drive
n
Fairfield, Ohio 45014
NMT is a division of Norgas Metering Technologies, Inc.
n
513.942.3600 - Office
n
513.942.0096 - Fax
n
www.norgas.com
2.20 - Residence Water Certificate
Meters 12-095
Page 1 of 2
For:
Meter Indicating Volume
Water Meter / Single-Jet Domestic Style
Model: SingleMag
Sizes: 5/8” x 3/4”
Submitted By:
Norgas Metering Technologies, Inc.(dba NMT)
Fairfield, OH 45014
Tel: 513-942-3600
Fax: 513-942-0096
Contact: Mike Dick
Email: [email protected]
Web site: www.norgas.com
Standard Features and Options
Standard Features
 Sealed Eight Wheel Odometer Type Register with One Decimal Place
 US Gallon Unit of Measure
 Polymer Main Case with a Lid
 Magnetic Drive Register
 External Threaded Spuds 5” Length (Testing Requires an External Inlet Spud to Increase Length to approximately 7.5”)
 Cast Flow Direction Arrow on the Main Body of the Meter Case
 Water meter with blue register ring indicates up to 105 °F Maximum
 150 PSI Maximum Operating Pressure
Options
 Remote Pulsing Reed Switch Counter (Functions not Evaluated)
 Water Meter with Red Register Ring Indicates up to 160 °F Maximum
Note:
Approved for use only when installed according to the manufacturer’s instructions in a “HORIZONTAL” position with the
register facing up.
Note:
Save the external inlet testing spuds for future testing.
This device was evaluated under the National Type Evaluation Program and was found to comply with the applicable technical requirements of “NIST Handbook 44:
Specifications, Tolerances and Other Technical Requirements for Weighing and Measuring Devices.” Evaluation results and device characteristics necessary for
inspection and use in commerce are on the following pages.
Stephen Benjamin
Chairman, NCWM, Inc.
Kurt Floren
Committee Chair, National Type Evaluation Program Committee
Issued: October 19, 2012
1135 M Street, Suite 110 / Lincoln, Nebraska 68508
The National Conference on Weights and Measures (NCWM) does not approve, recommend or endorse any proprietary product or material, either as a single item or as
a class or group. Results shall not be used in advertising or sales promotion to indicate explicit or implicit endorsement of the product or material by the NCWM.
2.20 - ResidenceCertificate
Water Meters
Number: 12-095
Page 2 of 2
Norgas Metering Technologies, Inc. (dba NMT)
Meter Indicating Volume / SingleMag
Application: Approved for use as a domestic water meter (105 °F max-Blue Ring) or (160 °F max-Red Ring) in legal sub-metering
installations. The flow direction indications are cast into the body of the meter.
Identification: The NMT logo, NSF-61-G, gallon unit of measure, pulse and flow specifications, serial number, and the model
SingleMag are printed on the register face. The NTEP CC number is permanently marked on the side of the meter.
Sealing: The meter can be sealed with a wire security seal threaded through a hole in the red or blue register ring and through a hole in
the external threaded spud inlet or outlet. The factory seal uses the same sealing provisions and should be left in place for warranty
purposes.
Operation: This is a velocity-type meter where in-flowing water, distributed by a single jet, flows past an impeller in the measuring
chamber, creating an impeller velocity directly proportional to water velocity. The meter’s register interprets the velocity into total
flow indicated in a volumetric gallon unit of measure.
Test Conditions: Three SingleMag meters were submitted for evaluation. The meters were mounted in line on a gravimetric water
meter test bench in a lab at the manufactures facility. The meters were subjected to three tests each at the maximum, intermediate, and
minimum flow rates. After successful initial testing, an excess of 205 000 gallons of hot water flowed through the meters. The
emphasis of the evaluation was on the device design, marking requirements, accuracy, and repeatability of the meter and the tested
temperature range of 45 °F to 152 °F maximum. All tests were then repeated.
Results of the evaluation indicate the devices comply with applicable requirements.
Evaluated By: J. Roach (CA)
Type Evaluation Criteria Used: NIST Handbook 44 Specifications, Tolerances, and Other Technical Requirements for Weighing
and Measuring Devices, 2012 Edition. NCWM Publication 14 Measuring Devices, 2012 Edition.
Conclusion: The results of the evaluation and information provided by the manufacturer indicate the device complies with applicable
requirements.
Information Reviewed By: J. Truex (NCWM)
Example(s) of Device:
NSF International
OFFICIAL LISTING
NSF International Certifies that the products appearing on this Listing conform to the requirements of
NSF/ANSI Standard 61 - Drinking Water System Components - Health Effects
This is the Official Listing recorded on January 18, 2013.
Norgas Metering Technologies, Inc.
Fairfield, OH 45014
888-667-4278
513-942-3600
Facility: Fairfield, OH
Mechanical Devices
Trade Designation
Size
[1] [G]
Miscellaneous Process Devices/Components
Water
Contact
Temp
Water
Contact
Material
Poly-480 Polymer Connections
[G]
Water Meters
3/4"
D. HOT
MLTPL
MLTPL
Singlemag-Poly-C
5"
D. HOT
Singlemag-Poly-H
5"
D. HOT
MLTPL
Versamag-Polymer Cold
3/4"
D. HOT
MLTPL
Versamag-Polymer Hot
3/4"
D. HOT
MLTPL
[1] Poly-480 Polymer Connections may be sold separately from the Versamag-Polymer water
meters.
[G] Product also Certified to NSF/ANSI 61, Annex G and is in compliance with California's
Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.
Weighted average lead content <=0.25%; Solder and flux lead content <=0.2%.
Note: Additions shall not be made to this document without prior evaluation and acceptance by NSF International.
1 of 1
C0094627
789 N. Dixboro Road, Ann Arbor, Michigan 48105-9723 USA
1-800-NSF-MARK / 734-769-8010
www.nsf.org
ES1501/EN1501-XL EchoStream®
TapWatch® Transmitter
Installation and Operation Manual - 04590A
Note: If connecting to a meter that has polarity to its pulse
output, the negative (—) should be connected to the outside
terminal, closest to the corner of the board.
A
1 Overview
Connected to pulse-output meters being used for multi-family
submetering, the ES1501 and EN1501-XL transmitters will
transmit data to an RF receiver that is connected to a Data
Concentrator and Communicator (DCC-5800). The ES1501
includes a replaceable battery; the EN1501-XL includes a longlife battery that is not replaceable.
B
1.1 Inovonics Wireless Contact Information
If you have any problems with this procedure, contact Inovonics
Wireless technical services:
• E-mail: [email protected]
• Phone: (800) 782-2709; (303) 939-9336
1.2 ES1501/EN1501-XL Components
A
B
C
Figure 2 Connect the Transmitter to the Meter
A. Cabling thru-hole
B. Removable header terminal
2.2 Select Frequency Band
If you are using either transmitter anywhere except North
America, you will need to select the frequency band for your
geographic area. If you are using the transmitter in North
America, there is no need to select the frequency band. All
transmitters are set for North America by default.
D
E
Figure 1 ES1501/EN1501-XL Components
A. Battery (ES1501- B. Tamper switch
C. Removable header
style battery shown)
terminal
D. Frequency band E. Reset button
selection pins
2 Installation and Startup
2.1 Connect Transmitter to Meter
Connect the transmitter to the meter as follows:
1. Open the housing by pressing down on the base tab near the
wiring thru-hole while lifting away the cover.
2. Fully insert stripped wires into the removable header
terminal.
3. Use a small Phillips screwdriver to tighten the screws that
secure wires to the removable header terminal.
4. Attach removable header terminal (if removed) to the
transmitter board as shown.
© 2005 Inovonics Wireless - www.inovonicswireless.com
Select Frequency Band on the ES1501
1. Place the selection jumper included in the accessory pack on
the appropriate frequency band selection pins (Figure 1).
• Leave the jumper off the pins to select 902-928 MHz for
North America.
• Place the jumper on the left two pins to select 921-928
MHz for New Zealand.
• Place the jumper on the middle two pins to select 868-869
MHz for Europe.
• Place the jumper on the right two pins to select 915-928
MHz for Australia.
Select Frequency Band on the EN1501-XL
1. Place the selection jumper included in the accessory pack on
the appropriate frequency band selection pins (Figure 1).
• Leave the jumper off the pins to select 902-928 MHz for
North America.
• Place the jumper on the left two pins to select 921-928
MHz for New Zealand.
• The selection marked EU is non-functional on the EN1501XL. Do not select the middle two pins.
• Place the jumper on the right two pins to select 915-928
MHz for Australia.
2.3 Mount the Transmitter
1. Use the double-sided tape to mount the transmitter to a clean
wall.
2. If installing the ES1501, the transmitter can be secured a wall
with the mounting screw and anchor. Remove the battery to
access the mounting screw hole; press the reset button after
replacing the battery.
Note: Ensure cabling enters the housing through the access
wiring thru-hole, and replace the housing (Figure 2).
B
A
C
Figure 3 Mount the Transmitter
A. Anchor installed in wall
B. Double-sided tape
C. Mounting screw
2.4 Register the Transmitter
Note: See “Programming the PMT-Meter Pair” in TapWatch User
Manual for more information.
1. Confirm that transmitter is connected to the meter.
2. Confirm that the battery is installed.
3. Go to the “Registered Meters” tab of the Site Information
editor.
4. Click “Add” on the “Registered Meters” page; confirm selected
building.
5. Complete the “Add New Meter To...” form when it appears.
6. Click the “Register” button.
7. When prompted, press the reset button on the transmitter;
wait for confirmation.
3 Replace the Battery (ES1501 Only)
When the low battery message is received, you will need to
replace the ES1501 battery.
1. Open the housing by pressing down on the base tab near the
wiring thru-hole while lifting away the cover.
2. Remove the old battery, taking note of the battery
orientation.
3. Insert the new battery, making sure it is aligned correctly.
4. Press the reset button.
Note: ES1501 transmitters retain programming data in nonvolatile memory. They do not require reprogramming after loss of
power. Install new battery and press the transmitter reset button
to re-initialize the transmitter and restore programming. Its
count will go to zero and the initial Meter Read count will be
updated in the DCC.
4 Specifications
Dimensions: 3.57" x 1.70" x 0.85"
Operating environment: 0°- 60°C (32°- 140°F), 90% relative
humidity, non-condensing
Typical battery life: ES1501: 5 years at 70 to 90°F (20 to
30°C). Higher temperatures reduce battery life. EN1501-XL:
calculated battery life of 20 years at 70 to 90°F (20 to 30°C).
Higher temperatures reduce battery life.
ES1501 Battery (BAT604): 3.0V lithium (DL123A) The battery
is always supervised.
5 Warranty/Disclaimer
Caution: Changes or modifications to this unit not expressly
approved by Inovonics Wireless Corporation may void the
installer's authority to operate the equipment as well as the
product warranty.
Inovonics Wireless Corporation (“Inovonics”) warrants its
products (“Product” or “Products”) to conform to its own
specifications and to be free of defects in materials and
workmanship under normal use for a period of fourteen (14)
months from the date of manufacture. Within the warranty
period, Inovonics will repair or replace, at its option, all or any
part of the warranted Product. Inovonics will not be responsible
for dismantling and/or reinstallation charges. To exercise the
warranty, the User (“User”, “Installer” or “Consumer”) must work
directly through their authorized distributor who will be given a
Return Material Authorization (“RMA”) number by Inovonics.
Details of shipment will be arranged directly through the
authorized distributor.
This warranty is void in cases of improper installation, misuse,
failure to follow installation and operating instructions,
alteration, accident or tampering, and repair by anyone other
than Inovonics.
This warranty is exclusive and expressly in lieu of all other
warranties, obligations or liabilities, whether written, oral,
express, or implied. There is no warranty by Inovonics that
Inovonics product will be merchantable or fit for any particular
purpose, nor is there any other warranty, expressed or implied,
except as such is expressly set forth herein. In no event shall
Inovonics be liable for an incidental, consequential, indirect,
special, or exemplary damages, including but not limited to loss
of profit, revenue, or contract, loss of use, cost of down time, or
interruption of business, nor any claim made by distributor's
customers or any other person or entity.
This warranty will not be modified or extended. Inovonics does
not authorize any person to act on its behalf to modify or
extend this warranty.
This warranty will apply only to Inovonics Products. Inovonics
will not be liable for any direct, incidental, or consequential
damage or loss whatsoever, caused by the malfunction of
Product due to products, accessories, or attachments of other
manufacturers, including batteries, used in conjunction with
Inovonics Products.
Note: E-mail [email protected] for a copy of the CE
Declaration of Conformity.
EN5000 Repeater
This sophisticated line-powered 900 MHz repeater receives, decodes, and
re-transmits signals from Inovonics Wireless EchoStream® series transmitters.
The EN5000 acts as a “range expander” for any Inovonics Wireless
EchoStream transmission that it “hears”, allowing the Inovonics Wireless
installation to scale from smaller commercial sites to large campuses
with several buildings. It includes an on-board, state-of-the-art, lithium-ion
battery. For applications that require protection for the EN5000 from
environmental elements, it may be placed in an outdoor weatherproof
enclosure (ACC640).
Advantages
i Easy to install. Just mount and plug in. No wires or programming required, though registration is
required for a fully supervised system.
i Reliable. Supervises for low battery, loss of line power, case tamper, and jam detection (interference on all
channels is greater than 30 seconds). Also includes an on-board lithium-ion battery, which:
- Provides backup with no additional expense.
- Offers up to 24 hours of continuous operation when line power is not available.
- Reports loss of power when programmed/supervised to slave receiver.
i Expandable. Several “layers” of repeaters can be employed to provide coverage of large facilities, multi-story
buildings, or sites with multiple buildings.
i Efficient. Incorporates sophisticated signal management, preventing “ping-pong” messages and maximizes
reliability.
English
- Facility Water Distribution
EN5000221000
Specifications
Radio
2.20 - Residence
Water Meters
Battery Connector
Inovonics Wireless EchoStream
using 900 MHz
Housing
Material
Closure
Dimensions
204 gm (7.2 oz)
Power requirements
14VAC
Battery capacity
1800mAH @ 3.7V
Back-up battery life
24 hours typical
Operating environment
0° - 60°C (32° - 140°F)
up to 90% relative humidity
(non-condensing)
Conformity
Shield Can
Line
Power
ABS
Latching with optional screws for
high security installs
162.0 x 91.4 x 27.9 mm
(6.38 x 3.60 x 1.10”)
Weight
Battery charger
operating environment
Battery Assembly
Case Tamper
External Tamper Input
Antennas
0° - 40°C (32° - 104°F)
Meets or exceeds BSI DD244
(Class VI)
Accessories
ACC640
BAT850
Weatherproof plastic enclosure for outdoor installations
Replacement lithium-ion battery assembly
Repeater Network
)))
)
The receiver hears the signal from
the repeaters and processes
accordingly.
The Inovonics Wireless
transmitter sends out a
signal.
Repeaters receive the signal and re-broadcast it, allowing
you to extend the range of your RF system so you can
cover large areas such as installations in campuses, sites
with detached buildings, or multi-story complexes.
ES - EchoStream Select, suitable for 868 & 900 MHz applications
EE - EchoStream Eight-Six-Eight, 868 MHz applications only
EN - EchoStream Nine-Hundred, 900 MHz applications only
The range and performance of any wireless product depends on the structure and environment in which it operates.
Continual enhancements to our products may cause specifications to change without notice.
®
e-mail: [email protected] • www.inovonicswireless.com
0606
© 2006 Inovonics Wireless Corporation
EN0004
RDL8500 - Remote data logger
The RDL8500 is a data logger for the TapWatch submetering system.
The RDL8500 interfaces to the wireless network for collection of utility
consumption data, stores the collected data, and transfers the data to a
remote billing server for bill generation. A PC running TapWatch 3
software is used to access the RDL8500. The RDL8500 communicates
with both Frequency Agile (FA) and EchoStream wireless networks
simultaneously, enabling the expansion of previously installed FA sites
with EchoStream hardware.
Why Inovonics Wireless is Best
The Inovonics Commercial Mesh Network has been specifically developed
for commercial applications to provide the most cost-effective solution for
a wide range of applications, while setting new standards for performance
and reliability in a wireless sensor network.
Reliability
Inovonics EchoStream 900MHz radio utilizes a unique frequency hopping,
spread spectrum technology to meet the demands of an increasingly
cluttered wireless world.
Flexibility
The flexibility of wireless is a necessity in today’s dynamic commercial
environments. The self-configuring EchoStream Commercial Mesh
Network allows you to adapt to changing floor plans and requirements in
a matter of minutes. New sensors can be added to the network as fast as
they can be mounted.
Scalability
The EchoStream Commercial Mesh Network’s backbone of intelligent
repeaters can extend coverage to thousands of sensors across entire
commercial campuses.
Datasheet
Features
• Reliable data collection for submetering
• Wall mount design
• Logs data for up to 2000 individually managed meters
• Stores 90 days worth of meter reads per individual meter
• Logs data for gas, water, electric, and run-time meters
• Time stamps incoming data
• LAN (RJ45) connection for direct PC connection
Power Requirements
• 120 VAC transformer included (ACC612)
Operating Environment
• 32° to 140°F, up to 90% relative humidity, non-condensing
Dimensions
• 11.5” x 8.75” x 2.25”
Weight
• 2lbs 7oz
System Requirements
• EN4000 or FA403 receiver
• Analog phone line
• TapWatch 3 software
Connectivity
• LAN for directly connecting a PC running TapWatch 3 software
• Analog phone line for remote communications
• Power
• RF receiver - EN4000 or FA403
• The range and performance of any wireless product depends on the structure and environment in which it operates.
• Continual enhancements to our products may cause specifications to change without notice.
Phone: 303.939.9336 • Toll-Free: 800.782.2709 • Fax: 303.939.8977 • E-mail: [email protected]
RoHS
520.11-SUB011
© 2011 Inovonics

0136 - 1 Hawk - In-Residence Water Metering System HW and CW

Transcription

Similar documents

Aeuidhzsuic asiu dhaidu hicu asciu hasicu asicuas hicu

TELSEC

ayout 1

liberty wireless

Home Station Configurations

SUBMITTAL TRANSMITTAL From: To: Submittal listing:

Chimbulak Area, Zailisky Ala Tau, Tien Shan. Steve Goodwin, Steve

EL1500 Product Announcement

Apartments Adrijana