TIMBER GLEN

COLORBODY ™ PORCELAIN
TIMBER GLEN
™
TIMBER GLEN ™
COLORBODY ™ PORCELAIN
MODERN
PLANKS
Timber Glen adds a modern, stylized twist to any room.
Capturing the look of rich wood planking in five exquisite
tones, this ColorBody™ tile exudes modern elegance with
a discriminating fashion sense.
FINISH THE LOOK
Create a custom look with unique tile pattern ideas.
BRICKJOINT PATTERN
CORRIDOR HORIZONTAL PATTERN
HERRINGBONE PATTERN
TIMBER GLEN ™
COLORBODY ™ PORCELAIN
CONTEMPORARY FIELD TILE
DUNE P620
HICKORY P621
CHERRY P622
COCOA P623
ESPRESSO P624
THATCH P625
TIMBER GLEN ™
COLORBODY ™ PORCELAIN
CREATIVE IDEAS
DUNE P610
HICKORY P611
ION METALS
Antique Bronze IM01 Liner
MASSALIA COPPER MS92
Twist Accent Strip
CHERRY P612
COCOA P623
MASSALIA COPPER MS92
Bead Accent Strip
METAL SIGNATURES AGED IRON MS10
Trelis Liner
ESPRESSO P614
THATCH P625
MASSALIA BULLION MS91
Frieze Accent Strip
METAL SIGNATURES AGED IRON MS10
Jardin Border
ACCENT
COLOR
ACCENT
COLOR
ACCENT
COLOR
Coordinate your design scheme with some of our top complimentary colors.
TIMBER GLEN ™
COLORBODY ™ PORCELAIN
SIZES
RESIDENTIAL USAGE
SQ.FT.
CARTON
PCS. PER
CARTON
FLOORS
WALLS
COUNTERTOPS
EXTERIOR
PATIOS
EXTERIOR POOL
DECKS
F
W
C
EP
ED
12 x 24 Field Tile
12" x 24"
(30.00 cm x 60.00 cm)
11.62
6
6 x 24 Field Tile
6" x 24"
(15.00 cm x 60.00 cm)
11.62
12
COMMERCIAL USAGE
TRIM
INTERIOR
TYPE
Bullnose
NUMBER
SIZE
PCS. PER
CARTON
S-44F9
4 x 24
16
EXTERIOR
LIGHT
RESIDENTIAL COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL
Floors/Patios
Walls/Backsplashes
Countertops
SHADE VARIATION
Pool Decking
MEDIUM (V2)
Color variation within each tile.
INSTALLATION
Pool Linings
Suitable for freezing and non-freezing climates when proper installation methods are followed.
TEST RESULTS
THICKNESS
GROUT JOINT RECOMMENDATION
3/8"
1/8" (3/16" when a rectangular size is used in a staggered brickjoint pattern, overlap not to exceed 33%, and when multiple
sizes are used together in a modular pattern)
ASTM#
RESULT
Water Absorption
C373
< 0.5%
Breaking Strength
C648
> 450 lbs
Scratch Hardness
MOHS
8.0
Chemical Resistance
C650
Resistant
A137.1
Wet: ≥ 0.42
Dynamic C.O.F.
A DCOF value of ≥ 0.42 is the new standard for tiles specified for commercial
application in standard A137.1–2012, Section 9.6. It replaces the SCOF value of ≥ 0.60
referenced in ASTM C1028. For more information on the correlation between the two
values and about the DCOF AcuTest,™ please visit
http://daltile.com/information/DCOF.
NOTES
Special consideration needs to be given when installing tiles 20" and larger. Please refer to
http://daltile.com/LargeTiles for information.
Special care should be taken when grouting with dark pigmented colors. A grout release
is recommended to prevent finely powdered pigments from lodging in the pores of the
surface. Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, tile and trim supplied for your
particular installation may not match these samples. Final color selection should be made
from actual tiles and trim and not from tile and trim samples or color reproductions.
Manufactured in accordance with ANSI A137.1 standards.
Water, oil, grease etc. create slippery conditions. Floor applications with exposure to
these conditions require extra caution in product selection. Not for use on ramps.
For additional information refer to “Factors to Consider” at: daltile.com/Factors.
By their very design, Daltile products can help make it easier for you to earn LEED™ points
and/or points towards many industry leading green home building programs. From using
recycled material content to establishing manufacturing facilities within 500 miles of your
project, we help ensure you don’t have to compromise your design to be environmentally
conscious. For detailed information, visit daltilegreenworks.com.
7834 C. F. Hawn Freeway | Dallas, Texas 75217 | 800.933.TILE
For more information about Daltile products and services, visit our website at DALTILE.COM.
© 2014 Dal-Tile Corporation (10/14)