TRUCK WHEEL BALANCER ACCESSORIES WWW.CEMB

TRUCK WHEEL BALANCER ACCESSORIES WWW.CEMB

TRUCK WHEEL BALANCER ACCESSORIES
Original CEMB Accessories
For Truck Wheel Balancers
C206 - C212 - C218
UC 215HW


STANDARD KIT
For wheel with central hole of Ø1.77”-8.7” (Ø45-221mm).
Made up of 4 cones, a spacer ring and a lock nut with handwheel.
41FF59322
40FF43716
3.1”÷4.3” (79÷110)
41FF86174
41FF59368
40FF43745
40FF51334
40FF43715
2.4”÷3.2” (60÷81)
40FF51315
40FF88351
40FF79260
41FFA2240
1.7”÷2.7” (43÷69)
301400525
40FF52417
3.8”÷6.7” (97÷170)
114008002
940010105
40FF43748
940051000
7.9”÷8.7” (202÷221)
290100060
Visit our website to see our complete
range of wheel balancers
and other products
CATTRKAD-3
LAST UPDATE 9/15/2016
WWW.CEMB-USA.COM
TRUCK WHEEL BALANCER ACCESSORIES
STANDARD TRUCK SHAFT

C206 (A) SHAFT

42FM42432
Shaft Ø40mm without pin
(for C206 (A) only)
46FM87677
Standard shaft Ø40mm with pin
(for Truck wheel balancers)
312120137
312120137
325047011
325047011
GL40 QUICK NUT KIT

42FM42433
DO NOT use ANY quicknut with TRUCK WHEELS
Quicknut for car wheels. Kit made up of a nut, two plastic cups complete with rubber ring to protect alloy rims and a
plastic ring.
40FF79256
41FF83148
41FF79255
41FF83154
41FF83147
40FF51334
40FF51315
40FF79258
40FF79260
UH20/2

CEMB PATENT
Universal bolt pattern adaptor (for wheels 3-4-5 holes or without center hole)
2”÷2.8” (52÷72.5)
40FF42165
OPTIONAL
41FF42048
40FF33438
940052253
40FF33439
115006002
40FF33440
1 PC
40FF33441
1 PC
40FF33443
1 PC
112019220
40FF33442
SET OF 5
CATTRKAD-3
LAST UPDATE 9/15/2016
WWW.CEMB-USA.COM
TRUCK WHEEL BALANCER ACCESSORIES
SR-USA

WD Wheel support spacer for very wide wheels + DC
spring pusher bush
41FF53532
Stud adapter for rim protection and high precision (for
lug centric wheels) for standard locking
41FF56189

WD + DC KIT
40FF56188
40FF53531
940013325
940013701
50mm
42FF46928
80mm
G40 WING NUT


12V adapter cable for C206 (Standard kit)
86SB80238
41FF43728
40FF43726
Steel wing nut with extended wings usable as alternative to
the standard wing nut. Allows a greater tightening torque.
12V ADAPTOR CABLE
SR 215/2

To centre wheels with 8 holes on Ø10.8”/11.25” (Ø275/285.75mm) and with 10 holes on
10.8”/11.25”/13.2” (Ø225/285.75/335mm). They are supplied with two spiders and a pre-centering ring. Pre-centering on
the central hole and on the guided stud bolts allows higher accuracy and centering without damaging alloy rims.
41FF67879
40FF67882
40FF67881
40FF67916
SET OF 1
40FF67883
SET OF 1
40FF67880
CATTRKAD-3
LAST UPDATE 9/15/2016
WWW.CEMB-USA.COM
TRUCK WHEEL BALANCER ACCESSORIES
EU
11” (281mm)
To centre truck or bus wheels with a center hole of
Ø11” (Ø281mm) by means of cones.
40FF43747

ACCESSORY RACK

Storage accessory rack for truck adaptors
41FF03151
CONE V
DAYTON 20”-22.5”
Wheel adaptor for Dayton wheels 20" and 22.5"
94FF37124

DAYTON 22”-24.5”
Wheel adaptor for Dayton wheels 22" and 24.5"
94FF37123

CATTRKAD-3
LAST UPDATE 9/15/2016
WWW.CEMB-USA.COM