12.49

DRIVELINE
Replacement Rear Drive Belts
APPAREL
A wide selection of 14 mm replacement final drive belts from Gates, Falcon and Dayco to fit most
Original Equipment and aftermarket belt drive units. The application chart below may be used to
determine the stock replacement belt for your particular application. The chart lists the model applications and years of fitment along with the belt width and tooth count. If you have installed oversized or
undersized pulleys, it‘s a safe bet that we have something that will fit your particular application.
Gates HTD ‘Poly Chain’ Belts
All HTD Poly Chain belts have the distinctive exterior ribbing and are manufactured in the USA by the
Gates Rubber Company. Poly Chain belts are Kevlar reinforced and feature rugged construction with
aramid fibers surrounded by polyurethane.
Dayco ‘Panther’ Rubber Belts
Rides smoother and quieter than conventional belts because the parabolic tooth profile eliminates trapped
air between the belt and pulley. Patented graphite, self-lubricating, double nylon cover with special stiflex
fiber allows this belt to hold up to maximum torque and extreme temperatures.
Falcon-SPC Carbon Fiber Belts by BDL
BDL’s latest offering the Falcon-SPC (Sport Plus Carbon) rear drive belts incorporate the latest in design
and technology. These belts are carbon fiber reinforced which offers up to 33% more tensile strength
than standard drive belts which makes these belts a must for high-horsepower applications.
All 14 mm
Gates HTD
tooth to
Poly Chain
tooth
Drive Belts
20 mm belts
132 teeth
133 teeth
135 teeth
24 mm belts
n/a
132 teeth
133 teeth
1” belts
42749
126 teeth
42730
130 teeth
42731
132 teeth
42732
133 teeth
44602
135 teeth
42748
136 teeth
137 teeth
139 teeth
140 teeth
1 1/8” belts
43023
125 teeth
42778
126 teeth
43117
128 teeth
42780
130 teeth
42781
132 teeth
42782
133 teeth
42783
135 teeth
42784
136 teeth
137 teeth
640077
139 teeth
1 3/8” belts
n/a
149 teeth
150 teeth
1 1/2” belts
42614
125 teeth
43043
126 teeth
42615
127 teeth
43021
128 teeth
42616
130 teeth
43045
132 teeth
43020
133 teeth
43049
135 teeth
43044
136 teeth
42879
139 teeth
Dayco Panther Falcon SPS
Ultra Cord
Carbon Fiber
Drive Belts
Drive Belts
642680
642684
642688
n/a
42892
42894
42895
42896
42897
42751
42772
42753
42774
42775
44603
42776
640078
n/a
640080
42750
42126
42127
42752
42754
42132
42133
42135
42136
n/a
642697
642676
642679
642683
642687
642691
642692
642695
618477
642669
642673
642675
642678
642682
642686
642690
642696
642694
n/a
642668
642672
642674
642677
642681
642685
642689
642693
FOOT
CONTROLS
HAND
CONTROLS
LIGHTING
ELECTRICAL
Fitment Guide: Rear Drive Belts
1-1/2" Wide Belts
125 teeth
Special Application
126 teeth
Fits 80-86 FXB, FXSB, FXWG: 82-84 FL (repl. OEM 4000379)
127 teeth
Special application also (International 89-92 Softail repl.
OEM 40010-89)
128 teeth
Softail 93-99 with 61T rear pulley (repl. OEM 40012-90)
Fits International 93-94 Softail and 91-93 Dyna models
130 teeth
Fits 95-99 Softail with 65 T rear pulley (repl. OEM 4001794)
132 teeth
Fits 86-04 Softail with 70 T rear pulley (repl. OEM 4002386) Fits International 89-93 FLT, FXR
133 teeth
Fits 91-99 Dyna (repl. OEM 40015-90)
135 teeth
Fits 85-96 FLT, FXR ( For shorter fit than stock)
136 teeth
Fits 85-96 FXR, FLT (repl. OEM 40001-85)
139 teeth
Fits 97-03 FLT (repl. OEM 40024-97)
1-1/8" Wide Belts*
125 teeth
Fits 91-03 Sportster with 55 T pulley (repl. OEM 4003891)
128 teeth
Fits 91-03 Sportster with 61 T pulley (repl. OEM 4002291)
132 teeth
Fits 06- Dyna (International with 34-68 ratio)
133 teeth
Fits 00- Dyna with 70 teeth pulley
135 teeth
Fits 00- domestic and international Softail with 70 teeth
pulley
136 teeth
Fits 04 883-883C
137 teeth
Fits 04-06 XL 1200R-1200C
139 teeth
Fits 04-06 FLT
Note: All other sizes in 1-1/8" width are for custom applications, fitment of teeth size is the same
as all of the above.
1-3/8" Wide Belts
149 teeth
Fits 04- VRSCA/B V-Rod
150 teeth
Fits 02-03 VRSCA/B V-Rod and (02- International VRSCA/B
V-Rod) (repl. OEM 40027-01)
1" Wide Belts**
133 teeth
Fits 07 FXSTD,FLSTC, FLSTSC, FLSTN
137 teeth
Fits 07 FLT
140 teeth
Fits 09- Touring with 34-68 ratio (40024-09)
Note: All other sizes in 1” width are for custom applications only fitment of teeth size is the same
as all of the above.
20MM Wide Belts
132 teeth
Fits all 07 Softail with 32/64 drive ratio
133 teeth
Fits 07 FXST,FXSTB, FXSTC, FLSTF
135 teeth
Fits 06 Softail FXST/I/B/BI/S/SI Models
24MM Wide Belts
133 teeth
Fits all 07 FLSTC, FLSTN, FLSTF
133 teeth
Fits all Softail models 13- FLSTF, FLSTC, FLSTN,
132 teeth
Fits Break-Out
EXHAUST
INTAKE
ENGINE
GASKETS
TRANNY &
CLUTCH
DRIVELINE
WHEELS, TIRES
& BRAKES
FRAMES
FORKS &
SHOCKS
SHEETMETAL
INSTRUMENTS
& GAUGES
LUBRICANTS &
CHEMICALS
1-1/8" Wide Belts for BUELL Models
656088 128 teeth Fits all XB12R, XB9SX, XB12Scg repl. OEM G0500.1AAG
656089 135 teeth Fits all XB12X, XB12XT, XB12Ss, XB12XP repl. OEM G0500.1AKE
HTD and Poly Chain are registered trademarks of the Gates Rubber Company. Note: The belts offered for sale on this page have no
warranty whatsoever.
for more details check www.custom-chrome-europe.com
SEATS &
TOURING
12.49
TOOLS &
EQUIPMENT
INDIAN &
VICTORY