Furnace CCTV Colour Cameras

Furnace CCTV Colour Cameras
Series FK-CF-PTZ-3612
Series FK-CF-1024
Look
into the
furnace
Introduction
CCTV cameras used for process monitoring in high-temperature areas must be
especially suitable for difficult and special requirements in such production
sectors. Different fields of application in the steel, glass and cement industries
require rugged, vibration and shock-resistant cameras that are capable of
withstanding continuous operation without any problem, and that are
sufficiently sensitive to pick up high-resolution colour video images in detail.
Since 1968, PIEPER have been designing, building and installing
furnace chamber video cameras for the above fields of application and
special applications.
The present brochure will provide you with a summary of PIEPER's furnace
chamber series FK-CF-PTZ-3623 and FK-CF-1024 colour CCTV cameras.
Furnace colour cameras
Graphic User Interface for the remote
parameterization of the FK-CF-PTZ-3612
and (similar) the FK-CF-1024 series
Furnace colour CCTV cameras series FK-CF-PTZ-3612 (top) without SIG housing and FK-CF-1024
(below) with SIG housing and furnace special lens, type FRO-R-7070-13
General description
There are different furnace chamber colour CCTV cameras available (series FK-CF-PTZ-3612 and FK-CF1024), characterized by a number of technical features and special designs. The high-resolution cameras
are, in part, based an digital signal processing (DSP), provide different types of synchronization and are
built into probe camera SIG type protecting housings. The probe camera SIG type protecting housings are
designed in 1-cable-technology, and provided with one single 10-pin MIL standard connector an their rear
side. The series FK-CF-PTZ-3612 and FK-CF-1024 cameras have been especially designed for use in furnace
chambers and high-temperature areas of any kind. Owing to their high quality, they are ideally suitable for
furnace chamber viewing where excellent colour rendering in extreme light conditions are of paramount importance. Special features of the FK-CF-PTZ-3612 type HighTec furnace chamber cameras are
among other thinks:
Graphic User Interface GUI • Remote parameterization and remote control via serial RS232 interface •
Electronic pan, tilt and zooming in the frame • Colour and/or Black&White operation • PAL/NTSC video
output and S-Video output • Programmable lens control and back light compensation • 2-D-mirroring
allows for horizontal and vertical to be independently reversed left-right and top-bottom • Negative reversal
for Y (luminance) and/or C (colour) • Programmable test pattern generator makes possible custom-built
test patterns ....and many more!
Feuerraum-Farbkameras
Furnace Colour Cameras
Features
Series FK-CF-PTZ-3612-2-IQ-R1
Digital signal processing DSP
GUI Graphic User Interface
RS-232C Interface
High resolution
S-Video output
Electronic pan, tilt and zooming
Integrated test pattern generator
Interface/Data board to convert RS-232 to
RS-422 available (rem. adjust the setup menu)
Series FK-CF-1024-2-IQ-R1
High resolution
Digital signal processing DSP
On-screen Setup menu
Integrated character generator (9 characters)
RS-232 Interface
S-Video output
Interface/Data board to convert RS-232 to
RS-485 available, for KAB/KMF series (to locally
and remotely adjust the camera setup menu)
SPECIFICATIONS/TECHNISCHE DATEN
Sensor
Picture elements
TV system*
Resolution
Sensitivity
S/N Ratio
Synchronization
Back-light compensation
AGC
Gamma correction
White balance
Electronic shutter*
Video output
On-screen menu
adjustments*
RS-232 Interface
Power requirement
Power consumption
Lens mount
Lens control
Operating temperature
Dimensions (Ø x D)
Weight
* NTSC models
FK-CF-PTZ-3612-2-IQ-R1
FK-CF-1024-2-IQ-R1
1/2"-Interline Transfer CCD
752 x 582 pixels (HxV)
PAL/625 lines/Zeilen
> 450 lines/Zeilen (H)
3 lux (100% Video)
> 48 dB
internal, Quarz
free programmable
0 - 32 dB
10 steps adjustable
Automatic/manual
2500 to 9500 K
1/50- 1/50.000 sec.
in nine steps
FBAS 1,0 Vpp, 75 ohms/BNC,
or/oder S-Video,
Y: 1,0 Vpp/C: 0,286 Vpp
GUI: All camera parameters as well
as pan, tilt and zooming
RS-232C: 12-pol. HR10A-10R-12PC
12 VDC
appr./ca. 4,2 W
CS-Mount
Video (optional: DC)
- 20oC to/bis + 50oC
appr./ca. 25,4 x 25,4 x 63,5 mm
ca./appr. 83 g (camera head only)
1/3"-Interline Transfer CCD
752 x 582 pixels (HxV)
PAL/625 lines/Zeilen
> 480 lines/Zeilen (H)
1,0 lux/ F 1,2
> 50 dB
internal, Line-Lock
255 steps/level
10 - 36 dB
7 steps/7 stufen
3 steps/3 stufen:
2.000 K - 18.000 K
1/50- 1/10.000 sec.
1/120 sec. flicker-free
FBAS 1,0 Vpp, 75 ohms/BNC,
or/oder S-Video,
Y: 1,0 Vpp/C: 0,286 Vpp
Camera Setup PAL,
ID-Generator, Shutter PAL
8-pin. Mini-DIN
12 VDC/24 VAC
appr./ca. 5,0 W
CS-Mount
Video & DC-Drive
- 10oC to/bis + 55oC
(Ø x T) 75 x 240 mm
appr./ca. 500 g
Picture elements : 768 (H) x 494 (V)
: NTSC, 460 lines
TV system
: 1/60 - 1/50.000 sec
Shutter
Aufnahmesensor
Bildelemente*
TV-System*
Auflösung
Empfindlichkeit
S/N-Verhältnis
Synchronisation
Backlight-Kompensation
AGC
Gammakorrektur
Automatischer
Weißabgleich
Elektronischer Shutter*
Video-Ausgang
Einstellungen im
On-Screen-Menü*
RS-232-Schnittstelle
Betriebsspannung
Stromaufnahme
Objektivaufnahme
Objektivsteuerung
Betriebstemperatur
Abmessungen (Ø x T)
Gewicht
* NTSC-Version:
Picture elements: 768 (H) x 494 (V)
TV system
: NTSC, 525 lines
Shutter
: 1/60 - 1/10.000 sec.
1/100 sec. flicker-free
On-Screen Menü: Camera Setup Menu NTSC
Series FK-CF-PTZ-3612: KSW-RS232-RS422-2012-13/3600, Plug-in interface data board, serves to convert RS-232
to RS-422; it is provided to be plugged in slot 1 of the camera connection boxes, types KAB and KMF (B-853)
Series FK-CF-1024: SO-1024-W, Software package (Windows®) for remote adjustement of all camera parameters,
System requirements: Pentium 500 MHz, 2 MB Harddisc space, Windows 95/98/WinNT 4.0/Win 2000/XP
Series FK-CF-1024: KSW-RS232-RS485-1024-DRC, Plug-in interface data board, serves to convert RS-232 to
RS-485; it is provided to be plugged in slot 1 of the camera connection boxes, types KAB and KMF (B-853)
Accessories
for series
Fk-CF-PTZ-3612
and FK-CF-1024
FK-CF-PTZ-3612-2-IQ-R1 (without SIG housing)
Lens-dependent
Zubehör
für Serien
FK-CF-PTZ-3612
und FK-CF-1024
FK-CF-1024-2-IQ-R1 (with housing SIG 75-240-1024)
251 - 305
FK-CF-PTZ-3612-2-IQ-R1
75
CS-Mount
High-quality CCTV and transmission
technology in industrial standards
Panasonic Professional AV technology
Image processing • Video measurement
3D-Video and computer graphics
Partner for advanced technology
ISO 9001 certified
Adjusting Back focus
FS-1000
10-pin Camera cable connector
Fibre optical security systems
Perimeter security systems
Microwave systems • Fire detection systems
Communication and Data technology
Building management systems
Head office
Branch office Düsseldorf
Branch office Berlin
Branch office Gera
PIEPER GMBH
Binnerheide 8
D-58239 Schwerte/Germany
Tel. (+49) 0 23 04 / 47 01-0
Fax (+49) 0 23 04 / 47 01 77
PIEPER GMBH
Gumbertstr. 111
D-40229 Düsseldorf/Germany
Tel. (+49) 0 211 / 21 50 33/34
Fax (+49) 0 211 / 21 50 36
PIEPER GMBH
Symeonstr.6
D-12279 Berlin/Germany
Tel. (+49) 0 30 / 7 22 52 99
Fax (+49) 0 30 / 7 22 44 87
PIEPER GMBH
Lusaner Str. 20
D-07549 Gera/Germany
Tel. (+49) 0 365 / 7 37 07-0
Fax (+49) 0 365 / 7 37 07 17
e-mail: [email protected]
- Technische Änderungen und Irrtümer vorbehalten / PIEPER reserves the right to change specifications without notice. -
Internet: www.pieper-video.de
P1E-VB17-10.04/FRS_cam/A:1.04
PIEPER
FRO 9881-12-IRM
Ø 78
©
240
by PIEPER GMBH • D-58239 SCHWERTE/GERMANY • ALLE RECHTE VORBEHALTEN • ALL RIGHTS RESERVED • TEXT, LAYOUT, SATZ UND SCAN: PIEPER GMBH • BEARBEITUNG UND BELICHTUNG: CopyWrite , ISERLOHN • DRUCK: SCHMIDT, LÜNEN •
NACHDRUCK (AUCH IN AUSZÜGEN) NUR UNTER QUELLENANGABE AUSDRÜCKLICH GESTATTET • GEDRUCKT AUF 100% CHLORFREI GEBLEICHTEM PAPIER
Besonderheiten