Approved tools Application Tool needed Fellert approved

Approved tools Application Tool needed Fellert approved

Approved tools
Tool
needed
Application
Cut and/or slice board
• Buzz saw with ruler
• Absorbent board trim knife
Mix and apply adhesive
on boards
• Notched trowel 4x6mm
• Scoop
Mechanical fixation
of boards
• Cordless drilling machine with
screw mag.
• Sharp cutter
Mixing of plaster
• 100 literwhite mixing container
• Fellert whisk 180 mm
Spraying plaster
• Spray pump/gun
Plaster finishing
• Soft plastic tr
tro
owel
• Longneckedsandingmachinewith vaccum
cleaaner
cle
ner..
• 80 grit sanding paper (for boardsand base
plaster)
• 220 gritsanding paper
Acoustical Coating
12013012 v.2.0
•
Fellert
approved
2
Graco RTX 5500 PI/5000 PI or Inomat M8
with nozzle kt and external 5,5 hp3 phase
pressured air compressor.
00
Kremlin EOS 30-C25, 04and 06 nozzle or
Graco Ultra Max II/595 PC Pro (or Titan
Performance 850e)
Tools Approved/recommended
List of tools approved/recommended by Fellert