Tools - MCM Electronics

Transcription

Tools
NEW!
•Quickly and easily detects
ferrous metal up to 4" deep and
non-ferrous metal up to 2" deep
•Pinpoint or wide scan options
•Locate nails, screws, ducting,
pipes, rebar, wiring, braces, and
more •Single-button operation for
simple use •Requires one 9V battery
•Locate embedded metal before your
drill or saw does •Find plumbing,
electrical, rebar, and other metals in
walls or concrete slabs up to 6" deep
•Indicates direction of metal with plus
(+) or minus (-) signs and audible
signals •Indicates target depth in
inches or centimeters •Requires
9V battery (not included)
Order #
22-10355
Bits . . . . . . . . . . . . . . 387
Carts . . . . . . . . . . 364-365
Cases . . . . . . . . . 404-407
Center Punches . . . . . . 368
Circuit Finders . . . . . . 360
Crimpers . . . 371-373, 375
Cut-Out Tools . . . . . . . 361
Drill Bits . . . . . . . 400-403
Files . . . . . . . . . . . . . 370
Hex & Torx Keys . . . . . 386
Knives . . . . . . . . . 368-370
Levels . . . . . . . . . . . . 361
Material Handling . 364-365
Measuring Tools . . . . . 366
Multi-Tools . . . . . . 368-369
Nut Drivers . . . . . . . . . 385
Pick-Up Tools . . . . . . . 371
Metalliscanner® M40
MT 6
ONLY
$149.00
Order #
22-10350
20
Tools
NEW!
MetalliScanner®
Section
ONLY
$39.99
Pliers . . . . . . . . . 376-379
Power Tools . . . . . 395-399
Precision Tools . . . . . . 388
Punchdown Tools . . . . 391
Saws . . . . . . . . . 361, 370
Scissors & Snips . . . . . 368
Screwdrivers . . . . 380-385
Staple Guns . . . . . . . . 367
Stud Finders . . . . . . . . 360
Tool Kits . . . . . . . 391-394
Tweezers . . . . . . . . . . 389
Vises . . . . . . . . . . . . . 377
Wall Scopes . . . . . . . . 361
Wire Fishing . . . . . 362-363
Wire Strippers . . . 374-375
Work Platform . . . . . . 361
Wrenches . . . . . . . 390-391
60 LED Rechargeable Work Light
Order #
22-9362
Order #
22-9502
ONLY
$12.99
Follow us on:
Product Questions Email: [email protected]
20
•Sounds a very loud (95dB)
alarm for up to 72 hours when it
gets wet •Will save you $$$ from
water damage •Place Leak Alert™
anywhere there is a danger of flood
or leaks near water heaters, sinks,
dishwashers, fish tanks, or sump
pumps •Ideal for your workshop,
kitchen, lab, basement or
crawlspaces •Floats in excessive flooding •Water resistant
•Low battery alert •Uses one 9V battery (not included)
•Dimensions: 4.3" (L) x 2.4" (W) x 1.4" (H)
•60 super bright LEDs will light up
just about any work area •Hook for hanging
•Rubberized grip makes it easy to hold
•Rechargeable 7.2V, Ni-MH battery lasts
3 to 4 hours continuous use per charge
•Built-in charge indicator light and
overcharge protection •Includes AC
and DC chargers •Shatterproof
plastic housing protects LED
bulbs from damage •Can be
used for A/V installations,
technician work, automotive
repairs, camping, or anywhere
where hands-free light is
needed •LED brightness:
12,000 MCD x 60 LEDs
Leak Alert™ Electronic
Water Detector
ONLY
$42.99
MCMelectronics.com
Email: [email protected]
page
359
Section
20
Tools
Stud Finders
NEW!
Circuit Finders
•MultiScanner® i520 quickly and
easily locates the edges and center
of wood and metal studs and
joists behind walls, floors, and
ceilings •Four different settings to
choose from •Ultra-bright display
screen makes it easy-to-read
•AC scan finds and traces live,
unshielded electrical wire up
to 2" (51mm) deep •Metal mode
locates non-ferrous metal up to
11⁄2" (38mm) deep, and ferrous
metal up to 3" (76mm) deep
•Mfr. #62353
Order #
22-10880
•One person can now find
the right circuit breaker
before turning off power to one
specific circuit •Receiver can
find circuits from lamp sockets,
lamp fixtures, AC outlets, bare
leads, and appliance outlets
•Just plug the unit’s transmitter
into the electrical outlet, then scan the breaker box with
the receiver, and the proper breaker will be identified •Be
confident the correct circuit is found so power will not be
lost to your computer, clocks, or freezer •Makes it easy
and convenient to scan all the breakers for identification
and labeling •Works with any live 80~277VAC circuit
•Requires one 9V battery (not included) Kit includes:
•Receiver •Transmitter •120VAC plug •Light socket
adapter •Separated socket blades •Alligator clips
•Convenient locking carry case •Mfr. #59353
Order #
22-10340
MultiScanner® Pro SL
•MultiScanner® Pro SL quickly and
easily locates studs, metal, and hot
electrical wiring behind walls, floors,
and ceilings •A full LCD arrow,
audio tone, and SpotLite® Pointing
System alert users when stud edges
are located •AC scan finds and traces
live, unshielded electrical wire up to
2" (51mm) deep •Metal mode locates
non-ferrous metal up to 11⁄2" (38mm)
deep, and ferrous metal up to 3"
(76mm) deep •Mfr. #62353
i320 OneStep
•MultiScanner® i320 quickly and
easily locates the edges and center
of wood and metal studs and joists
behind walls, floors, and ceilings
•Three different settings to choose
from •The spotLite® Pointing
System, and audio tone all indicate
the location of the target •Metal
mode locates non-ferrous metal
up to 11⁄2" (38mm) deep, and
ferrous metal up to 3" (76mm)
deep •WireWarning® detection
indicates the presence of live,
unshielded electrical wire up to
2" (51mm) deep in stud and metal
scanning modes •Mfr. #63414
CF 12 Circuit Breaker Finder
Order #
22-10885
Order #
22-10875
ONLY
$46.99
StudSensor™ Picture Kit
•The StudSensor™ stud finder
quickly and easily locates the edges of
wood and metal studs behind drywall
•Locates metal studs up to 3⁄4" deep
(19mm) Kit includes: •StudSensor™
stud finder, nails, and assorted hooks
rated from 10~75 lbs. capacity
•Mfr. #62320
•The StudSensor™ stud finder quickly
and easily locates the edges of wood
and metal studs •Easy-to-read LCD
display •WireWarning® detection
indicates the presence of live AC
voltage •Locates metal studs up
to 3⁄4" deep (19mm) •Spotlite®
pointing system shines a beam
of light on the wall to identify
the target •Mfr. #61980
Order #
22-10895
ONLY
$39.99
Order #
22-10890
ONLY
$23.99
•Finds wood and metal studs and
joists up to 11⁄2" deep beneath the
surface of walls, ceilings, and
floors, in one simple step •Unit
beeps and shines a beam of light
with the SpotLite® Pointing
System above center of the stud
•Integrated erasable marker easily
marks the center of the stud with
a push of a button •9 LED display
indicates stud edges and center
and deep targets in light or dark
atmospheres •AC WireWarning®
automatically detects hot AC
wiring up to 3" deep •Uses
one 9V battery (included)
E-Z Check® Plus
GFI Circuit Tester
The E-Z Check® plus GFI circuit tester
checks for the following conditions:
Correct wiring, open ground, reverse
polarity, open hot, open neutral, hot on
neutral, hot and ground reversed with
open hot, and ground fault interruption. By
depressing the black button on the unit, the
E-Z Check intentionally overloads the actual
GFI breaker to test its mechanical operation.
page
360
Mfr. # 61-051 (1-3) $39.99 Order #
22-9348
(4-up)
$37.80
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$12.99
StudSensor® i60 OneStep®
Ground Fault Circuit Tester
Order #
22-2000
ONLY
$34.99
NEW!
StudSensor™ Pro LCD
•One person can now find the
right circuit breaker before turning
off power to one specific circuit
•Just plug the unit’s transmitter into
the electrical outlet, then scan the
breaker box with the receiver, and
the proper breaker will be identified
•Be confident the correct circuit is
found so power will not be lost to
your computer, clocks, or freezer •Makes it easy and
convenient to scan all the breakers for identification
and labeling •Requires one 9V battery (not included)
ONLY
$49.99
NEW!
MultiScanner®
NEW!
20
ONLY
$49.99
•Four-mode scanner easily
and accurately locates studs,
joists, metal, and live electrical wire
•CenterVision® technology finds the
center of the stud or joist in a single
pass •Backlit LCD screen indicates
direction, edge, and center of studs
•Finds studs up to 3⁄4" deep •DeepScan
for studs up to 11⁄2" deep •Detect rebar
up to 3" deep, and copper pipe up to
11⁄2" deep •Wire Warning Alert detects
hot electrical wiring •Requires one 9V battery (included)
NEW!
ONLY
$149.00
Order #
22-9356
MultiScanner i500
i520 OneStep
CF 12 Pro Circuit
Finding System
Order #
22-9358
NEW!
MultiScanner®
NET 30
Terms
Customer Service: 1-877-626-3532
ONLY
$39.99
Tools
Wall Scopes
Flexible Shaft Wall Scope
The Duratool flexible wall scope makes inspection
of hard-to-see areas extremely simple. •Often pays
for itself on your first need •6mm shaft will fit through
holes as small as 1⁄4" •Great for home theater installation,
automotive, marina, locksmiths, electricians, homeowners,
inspectors, law enforcement, HVAC repair, and infinite
more uses •Bright Xenon bulb lights up any inspection
area •7400 pixel fibers and wide angle lens produce
sharp images •Waterproof shaft and lens for plumbing
and marina use •Focuses on objects as close as 1mm
•Available in 18" and 36" lengths •Magnet attachment
(optional) retrieves parts dropped in tight areas •Precise
45° mirror attachment (optional) gives another viewing
perspective in tight places
Order #
22-9800
22-9805
22-9820
22-9824
22-9828
22-9807
Description
MSRP
18" flexible scope kit
$299.99
399.99
Magnetic tip
49.99
45° mirror tip
49.99
Xenon replacement bulb
14.99
Replacement battery door
-
ONLY
$149.00
249.00
29.99
29.99
8.99
2.49
Section
20
Obedient Shaft Wall Scope
The Duratool obedient shaft wall scope makes inspection
of hard-to-see areas extremely simple. •Often pays for
itself on your first need •10mm obedient shaft allows
bendable customization for your needs •Great for home
theater installation, automotive, marina, locksmiths,
electricians, homeowners, inspectors, law enforcement,
HVAC repair, and infinite more uses •Bright Xenon bulb
lights up any inspection area •7400 pixel fibers and wide
angle lens produce sharp images •Waterproof shaft and
lens for plumbing and marina use •Focuses on objects as
close as 1mm •Available in 18" and 36" lengths •Magnet
attachment (optional) retrieves parts dropped in tight areas
•Precise 45° mirror attachment (optional) gives another
viewing perspective in tight places
Order #
22-9810
22-9815
22-9822
22-9826
22-9828
Description
MSRP
$349.99
449.99
Magnetic tip
49.99
45° mirror tip
49.99
Xenon replacement bulb
14.99
Levels
ONLY
$149.00
249.00
24.99
29.99
8.99
NEW!
LCD Wireless Inspection Camera
•Inspection camera utilizes a flexible 37" shaft and 2.3"
color LCD monitor to allow you to get a clear view in
constricted areas •Take a peek inside of walls, under
appliances, into plumbing, and other areas to find
obstructions, lost tools, or to estimate damage •Monitor
operates on handle, or detaches for up to 30 meters
of wireless operation •Monitor has A/V in and out
•Adjustable twin-LED light on tip •Camera-end and shaft
are IP67 rated and waterproof up to 1 meter •Couple up to
four additional shaft extensions for 189" maximum length
•Includes mirror, hook, and magnetic attachments
•Powered by rechargeable Li-Ion battery (included),
and four “AA” batteries (not included)
Order #
22-10570
22-10575
Description
Wall scope with LCD
38" shaft extension
MSRP
$299.00
39.99
ONLY
$159.00
19.99
Work Platform
Platform
•Save on costly repairs and stay safe by using the Ceiling
Saver™ during your next attic installation •The platform is
portable enough to carry up ladders and through any attic
access and unfolds to provide a stable 12" x 48" textured
working platform •Protects ceilings from dropped tools and
accidental step-throughs •2½" grooves seat securely on 24"
spaced rafters •Made from durable high-impact plastic
•Supports up to 250 lbs.
NEW!
Order #
22-10360
ONLY
$44.99
Order #
22-10580
ONLY
$69.99
Cut-Out Tools
WL 25 Pro Water Level
•Level objects up to 100'
apart •Use to level chair rail, in-wall speakers, fence
posts, decks, drop ceilings, and more •Loud 95dB
indicator allows for use around corners •1⁄16" accuracy
Includes: •Unit •25' hose •Filler nozzle •Mounting
bracket with height-adjusting screw •Hose extension
adapters to allow use of up to 100' of garden hose
NEW!
Drywall Hammer Cutter
Reduce dust and errors during custom
installations with this precision drywall
hammer cutter. Just tap the top of the unit with
any hammer for clean cutting. •Adjustable up
to 1" deep for drywall and gypsum board •Cuts
wood paneling without splintering •Ergonomic
handle design •Includes three spare blades in handle
•Mark precise holes in
paneling and drywall
•Works for single or
double gang boxes
•Built-in level
Order #
22-10590
ONLY
$11.99
20
Order # Description
(1-3) (4-up)
22-9190 Drywall hammer cutter
$24.99 $23.95
22-9192 Replacement blades - two pack
4.99
4.75
Wall Outlet Level
and Template
NEW!
•Heavy-duty aluminum I-beam frame with shock
absorbing end caps •Recessed magnetic base •Three
accurate 360° vials (include one 45°) read easily from
all angles and are set directly into level frame •Vials
never need adjustment •Large top read window and
screw-on vial covers with protective lenses allow
maximum visibility
Order #
22-7571
22-7572
Mfr. #
42-244
42-486
Length
24"
48"
ONLY
$14.99
19.99
Follow us on:
Drywall Protector Plate™
FATMAX™ Wallboard Saw
Professional I-Beam Levels
•Sharptooth™ technology cuts 50% faster than
traditional tooth design •Cuts on both the push and pull
stroke •Sharpened tip easily punches through drywall
•Hardened and tempered blade for durability •Blade can
cut through cement board •Ideal for drywall, wood, and
plastic •Ergonomic non-slip grip to maximize comfort
and use •Composite handle design for strength and
durability •Mfr. #20-556
The plate temporarily locks on
and protects the outlet hole and
surrounding area from costly paint
and drywall damage when pulling
wire, conduit, fish rods, and
flexible drill shafts. The built-in
tabs have a reversed spring action
to eliminate restriction of the
work hole.
Order #
22-7597
Order #
22-10595
ONLY
$11.99
MCMelectronics.com
ONLY
$19.99
page
361
Section
20
Tools
Wire Fishing
NEW!
Depthfinder™ Fish Tapes
Tuff-Grip™
Stainless Steel Fish Tape
NEW!
Magnepull™ Magnetic
Cable Retrieval System
•Powerful magnets allow you to guide cable exactly
where you want it •Pulls cables through drywall and
even insulation in seconds •Reduces cable fishing time by
70% •Eliminates wall damage from misplaced holes in the
wall •Easy-to-use in confined spaces •Reduces time spent
in the attic Kit includes: •Retriever unit •Drop magnet
with pull line •Jack chain •Instructional DVD •Convenient
carrying case
Order #
22-10655
ONLY
$129.00
The Ideal Tuff-Grip™ Stainless
Steel fish tape is a revolutionary
new product that provides the
user unparalleled comfort and
protection against rust and
corrosion. Features include:
•Stainless steel tape will not rust
or corrode •Rewinds easier than
standard tape •Large handle radius increases stability for
more winding control •Tuff-Grip™ handle accommodates
the largest glove size •Non-slip handle and finger grooves
provide added comfort •Lasts longer than ordinary tapes
•Gray handle allows quick identification •Includes
high-impact plastic case for storage and transport
Order #
22-6230
22-6235
Length
100'
200'
Order #
22-9384
ONLY
$99.99
Order #
22-10610
22-10612
22-10614
22-10616
Length
25'
50'
125'
240'
ONLY
$13.99
18.99
52.99
74.99
ONLY
$73.99
99.99
Navigator™
Fish Tapes
The Wire Python™
Magnetic Wire Snake
An incredibly easy way to
pull in-wall wires! Just drop
the wire attached to the leader
bullet through a 7⁄8" hole in the wall. Then
“grab” the leader from outside the wall
with the strong, magnetic paddle and
pull to the destination hole. The Wire
Python™ Magnetic Wire Snake works
great in all drywall applications; even
in insulated walls. Magnetic leader can be used on BES
threaded fish poles for added usefulness. This rugged tool
comes with it’s own custom carrying case.
•Made of 1⁄8" high-strength
steel •Permanent, laser etched
1' increments on the tape
allow you to more accurately
measure the depth of conduit
runs and determine the amount
of tape left to pay out •Full
grip-style handle gives you
a firm, steady grip as you
pull tape into the case
S-Class® Fiberglass
Fish Tape
•Slippery outer nylon jacket
designed to reduce jamming,
friction, and abrasion in small
conduit with existing wire and
cable •Nylon-coated fiberglass
core reduces risk of human contact
with live circuitry •Specially designed
contoured pulling eye will not hang-up, even on 1⁄2" 90
bends, accommodates six 10AWG bare wires •50' length
Order #
22-3043
ONLY
$119.00
•Designed for flexibility
and easy navigation
through conduit runs
•Non-conductive,
NEW! composite fish tape slides
easily over existing wires
and through multiple bends •The 13" case diameter allows
you to reel 15% more tape in a single revolution vs. a
standard 12" case Fiberglass and nylon: •The lightweight
and strong composite tapes resist harsh elements and are
strength rated up to 200 pulling lbs. Spiral steel: •The
durable, super-flexible spiral steel tape slides easily over
existing wires and through multiple bends and yields
a maximum pulling force of up to 500 lbs.
Order #
22-10620
22-10625
22-10630
22-10632
22-10634
Length
50'
100'
50'
100'
50'
Material
Fiberglass
Fiberglass
Nylon
Nylon
Spiral Steel
ONLY
$149.00
199.00
69.99
99.99
119.00
#22-10640
NEW!
NEW!
Fish Chain and Retriever
20
•18" flexible fish tool bends in any direction and hold its
shape •Included magnetic retriever used to quickly fish
wires in uninsulated walls •An even more versatile tool
when paired with available optional attachment kit (fish
hook, directional tool, magnet head, pull ring, ball chain,
and two replacement tips)
Order #
22-9782
22-9784
Description
Magnetic fish chain with retriever
Attachment kit
ONLY
$19.99
32.99
Fish Tape Pullers
6-Loop Wire Puller Leader
•Save time by attaching leader to the end of a fish
tape and pull up to 6 wires at once •Up to 450 lbs. pull
strength on main eyelet •Flexible construction allows
for easy navigation through multiple bends in conduit
•Staggered loop lengths won’t overlap and clog pipe
Order #
22-10645
ONLY
$16.99
•Exclusive design improves your grip
while pulling fish tape •Ergonomic design
is comfortable in your hand and provides
excellent leverage •Internal resistance
mechanism securely locks fish tape in
#22-10635 place for pulling
Order #
22-10635
22-10640
Compatibility
3
⁄16" composite and spiral steel tapes
1
⁄8" and ¼" flat metal tapes
ONLY
$16.99
11.99
Wet-Noodle™ Self Guiding In-Wall Retrieval System
The Wet-Noodle retrieval system has been updated to now contain
three components: 24" flexible insulated retriever with an ultra
strong earth magnet attached at one end; 10' of lightweight ball
chain with o-ring; and an 18" telescoping pocket retriever. This
system provides a fast and easy solution to connecting an in-wall
entry point to an exit point blindly (without vision tools) to pull
wire. Because of its speed and efficiency the Wet Noodle and
Retrievers is a must for every wire and cable installers’ toolbox.
Order #
22-2585
22-2590
22-2600
page
362
Description
Wet Noodle and Retriever
Replacement Wet Noodle
Hook-Zit (3 pack)
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$29.99
7.39
10.49
Fiberglass
Restoration Kit
•Fiberglass gel-coat
restorer and swabs to
repair minor splintering
and rough fiberglass surfaces on all types of fiberglass fish
rods •Instructions included
Order #
22-10605
NET 30
Terms
ONLY
$9.99
Tools
Wire Fishing
Fishtix Wire &
Cable Kit
The Fishtix kit is a
highly diverse cable
installation system,
designed to meet the
many needs of today’s
cable installation
world. It is ideally suited for such environments as drop
ceilings, cable trays, raceways, wire mold, and raised
floors. The Fishtix has extreme tensile strength while
retaining its pliancy. It is capable of handling over 200
pounds of pulling force, and when it is used in cable
trays it can virtually be extended to infinity. It will easily
ride over joists, beams, etc., even with a 5' span, jump
obstacles and pull around corners up to 60°. The Fishtix
kit includes: •(12) 4' tubular sections (7⁄8" diameter)
•“Cable Glide” or wisp head, used to provide horizontal
and vertical steering control and easy tangle-free passage
through busy cable ways •Bullnose section with stainless
steel female end •Bullnose section with quick release
button snap male end •3⁄16 Quick link •Heavy-duty Corex
carrying case
Order #
Description
22-6380
Fishtix Wire & Cable Running Kit
Replacement Accessories
22-6385
4'section for Fishtix 22-6390
Wisp head for Fishtix 22-6395
Female bullnose for Fishtix 22-6405
Quick link for Fishtix
ONLY
$198.00
ONLY
$15.99
17.49
8.71
2.09
NEW!
Order #
22-10600
ONLY
$39.99
Telescoping
Fiberglass Pole
Creep-Zit Fiberglass
Wire Running Kit
The Creep-Zit is “THE TOOL” that makes conventional
fish tape obsolete and has a use in every wire/cable install
job, residential or commerical. Consists of five 6' (30'
total) green fiberglass rods .159" dia. retaining their
memory to straight, making it go where you want, not
where it wants. Four of them have a male connector on
one end and a female connector on the other so they can
be screwed together. The fifth one has a female connector
on one end and a bullet shaped head with cross hole
(bullnose) at the other end. The cross hole in the bullnose
is designed to attach the wire (or the ball chain included
in the kit when fishing inside walls) to it. An eggbeater
(wisp) shaped head with male connector (also part of the
kit) is used as a guide to keep the rods from getting stuck
on obstacles and to provide a “wheel” to “creep” from
side to side when turning the rod with your hand. The kit
is stored in a convenient PVC heavy-duty carrying case.
Rod end connectors are not covered under warranty.
Order #
22-2665
22-3148
22-3149
22-9554
22-9556
Description Creep-Zit Replacement connector set Screw-on bullnose Screw-on Drag-Zit magnetic tip
Screw-on J-Tip
ONLY
$89.99
16.99
21.99
15.99
11.99
Order #
22-9100
ONLY
$125.00
Order #
22-9210
ONLY
$129.00
Fiberglass Green and
Luminous Wire Push/Pull Rods
Glowfish II Kit
•5⁄32" diameter luminous fiberglass rods for pushing and
pulling wire •Rods actually glow in dark areas, making
them easy to spot and use •Plastic coated rods are super
flexible for all tight jobs •Five 6' sections screw together
as needed •Rods feature durable, zinc-plated, rustproof,
machined steel end fittings •Comes packaged in a handy
clear case that allows light to charge rods for luminous use
•Optional attachment kit available (fish hook, directional
tool, magnet head, pull ring, ball chain, and two
replacement tips)
Order #
22-9790
22-9791
22-9784
22-9781
Description
Glowfish II kit
6' single rod, bullnose both ends
Attachment kit
6' single rod, bullnose both ends
The push/pull rods have a bullet
shape tip with cross hole (bullnose)
on both ends. The luminous rods
are made of phosphorous epoxy fiberglass
truly glowing in the dark after being charged
with light. The epoxy fiberglass makes them
stronger than the regular green rods,
therefore a little stiffer.
Order #
22-2620
22-2625
Description
4' length
6' length
ONLY
$89.99
10.49
32.99
10.49
ONLY
$16.99
26.99
NEW!
Magnamole™ Magnetic Cable Retrieval System
Grabbit™ Telescoping
Wire Pusher/Puller Pole
Lightweight, shockproof, sturdy self-locking telescoping
fiberglass pole. Indispensable for running wires or cables
indoors as well as outdoors, in residential or commercial
installations. Anytime you can see the wire or cable and
can’t reach it, just Grabbit. The inner “V” of the patented
Ztip has a double knife edge designed to literally grab the
wire, while the outer “V” (without knife edge) is designed
to push wires. The angles and edges are shaped to handle
many wire and cables sizes and types. Extends to 12' long.
Order #
22-2582
22-2660
22-9554
22-9556
Follow us on:
The RoyRods quickconnect system
provides a simple
and secure
connection between
rods and tips within
the system. The
connectors snap
together using a
unique ramped male detent and female locking window
that securely locks your rods and tips together both
rotationally and longitudinally. To release, simply depress
the recessed detent and rotate to release. This new rod
system will save you time and add convenience to each
installation job. This kit contains: •Five FiberFuse™
6' push/pull rods with male and female quick connector
ends •One luminous (glows in the dark) FiberFuse™ 6'
push/pull rod with male and female quick connector ends
•One quick connect 6' Fish-Tailz™ 5⁄16" (dia) mesh pull
sock •Whisk quick connect tip •Ball chain quick connect
tip (12" ball chain length) •Two female bull nose quick
connect tips •Kit is packaged in a clear square plastic tube
Description Grabbit Replacement Ztip Screw-on Drag-Zit magnetic tip
Screw-on J-Tip
ONLY
$79.99
15.99
15.99
11.99
•The powerful pick-up tool for safely and easily threading
cables through cavity walls •Simply place a magnetic cap
on the cable to be fed, and retrieve it with the magnetic rod
•Extension rods for use with deeper void spaces •Can be
used to thread cabling at an angle through void spaces
•Dramatically reduces shock risk Kit includes: •Magnetic
rod retriever •Two magnetic extensions •Five different
sizes of magnetic caps
Order #
22-10660
Replacement magnets
Order #
Size
22-10662
.169"~.205"
.236"~.259"
22-10664
.145"~.169"
.173"~.201"
.205"~.232"
MCMelectronics.com
ONLY
$32.99
Color
Red
Green
White
Gray
Black
Qty.
3
3
2
2
2
ONLY
$14.99
14.99
page
363
20
•Telescopes to full
length (6'~20') in
seconds •Easy to
handle in tight spots
•Push or pull wires
over long spans,
suspended ceilings,
crawl spaces and attics
•Works great in
factories and
warehouses, work a 25'
ceiling without a ladder •Made of non-conductive
fiberglass for safety •Innovative lever lock system locks
sections at any length •Sturdy, durable, and lightweight at
5 lbs. •Includes J-hook
20
RoyRods™
Quick Connector
Wire Running
Rod System
Toolbox Wire Fish Rod Kit
•18" sections are small enough to carry in most toolboxes
•5⁄32" glowfish luminous plastic-coated fiberglass rods •12'
overall connected length Kit includes: •One 18" bullnose/
female rod •Seven 18" male/female rods
Section
Section
20
Tools
Material Handling
#22-9875 Closed
collapsed
Folding Hand Cart
•A portable solution for
transporting equipment, luggage,
and other items on the job, on the
road, in the shop, and around the
house •Attached strap for securing
load •Smooth rolling 31⁄4" wheels
•Telescoping handle expands to
38" tall •Ergonomic grip •10" x
12" base •130 lbs. weight limit
•Collapses to just 12" x 22" x
31⁄2" in seconds for portability
and easy storage
Order #
22-10365
MSRP
$79.99
ONLY
$34.99
NEW!
Multi-Cart
Wire Spooler Kit
•Three built-in adjustable
bars for different spool sizes
•Bars adjust with moveable
pins on each side •Fits
on Cart-R6 (#22-9875),
Cart-08 (#22-9880),
Cart-R10 (#22-9882)
and Cart-R12 (#22-9885)
•Designed for inner and outer
cart use •Easily attaches and detaches from cart •Can be
used on outside of cart in conjunction with adjustable
shelves for versatile maintenance cart
Order #
22-10490
ONLY
$99.99
NEW!
Portable
Cable Caddy
#22-9880
Closed
#22-9885
Closed
Professional Multi-Cart
•8-in-1 professional equipment carts
#22-9870
change shape and length to easily accommodate any
Open
sized equipment •Textured powder coat finish is
extremely tough and environment friendly •Non-skid
frame bed surface resists load slippage •Expandable frame adjusts to load size •Spring loaded wingbolts won’t vibrate
out •Caster brake •Stair climbers •Foldable sides rotate and lock into place by pressing release cables •Expandable frame
accommodates innumerable cargo sizes and shapes
Order #
22-9870
22-9875
22-9880
22-9882
22-9885
20
(1-9)
$24.99
(10-24)
$23.70
(25-49)
$21.81
Mfr. #
CART-R2
CART-R6
CART-R8
CART-R10
CART-R12
Length
26"-39"
28"-42.5"
34"-52"
34"-52"
34"-52"
Sides (Height)
25" and 20"
24" and 24"
32" and 32"
32" and 32"
32" and 32
Multi-Cart
Solid Deck Kit
•Easily attaches
and detaches from
cart and stores small
for easy transport
•Two-piece plywood
deck prevents small
items from falling
through frame •Fits on Cart-R8 (#22-9880), Cart-R10
(#22-9882) and Cart-R12 (#22-9885)
Order #
22-10480
•Stable, folding style frame
holds cable reels up to 16"
wide and 24" diameter
•Made of sturdy 1"
metal tubing with
black finish •Unit
can be used to
carry and store
your cable reel when
not in use •Folds flat for
storage •5⁄8" center axle
Order #
33-10900
(50-up)
$19.63
ONLY
$59.99
page
364
ONLY
$42.99
•Constructed of rugged 1"
steel tubing •Cable caddy is
43" tall and can accommodate
spools up to 16" wide on solid
steel 1⁄2" axles •Features 6 axle
positions for unlimited
versatility •Sturdy 7" rubber
wheels •Wire and spools
not included
ONLY
$99.99
119.00
159.00
179.00
229.00
Rack-a-Tiers®
Wire Caddy
This very versatile wire
caddy will hold large
or small spools of
wire. •Can hold eight or
more spools! •Compact
carrying size and
interlocking design
makes for easy
transportation •Also can
be used as a pipe vise,
workbench, saw horse,
tool caddy, stool, and
much more •Waterproof and rustproof •Supports wire
reels up to 34" diameter and 330 lbs.
ONLY
$99.99
ONLY
$229.00
Cable Caddy
•Holds one 20" x 24" reel
•Stable design keeps unit from
tipping while in use •Compact
unit folds up for easy
storage and portability
•Made of sturdy 1" tubing
with durable black finish •Two 6" wheels
for stability and simple movement
Order #
22-9634
ONLY
$74.99
Dual Cable Caddy
•Holds various combinations of two cable reels •Adjustable bar heights and can be loaded two
different ways for versatility •Stable design keeps unit from tipping while in use •Folds up for
easy storage and portability •Made of sturdy 1" tubing •Two 6" wheels
for stability and simple movement
Order #
22-9636
1-800-543-4330
Fax: 1-800-765-6960
Wheels
6" and 4"
4" and 4"
8" and 5"
10" and 5"
10" and 8"
Cable Caddy
Cable Caddy
•Holds one 20" x 16" reel •Stable
design keeps unit from tipping
while in use •Compact unit
folds up for easy storage and
portability •Made of sturdy
3
⁄4" tubing with durable
power-coat black finish
Load Cap.
350 lbs.
500 lbs.
500 lbs.
500 lbs.
500 lbs.
Order #
22-9382
Order #
22-9102
Order #
22-9630
#22-9882
Closed
ONLY
$149.00
NET 30
Terms
Tools
Material Handling
Folding Cart
20
#22-9130
This durable and lightweight
cart makes life for the business
traveler that much easier. It
fits in the airline overhead
compartment and easily stores
in a closet or trunk. Folds
easily in seconds for storage.
It is perfect for use in offices
or home. Specifications:
•Weight: 7 lbs. •Maximum
load: 110 lbs. •Dimensions
extended: 401⁄2" (H) x
151⁄4" (W) x 17" (D)
•Dimensions folded:
231⁄2" (H) x 151⁄4" (W) x 2" (D)
Order #
22-8480
Section
Bungee Cord Set
#22-5120
•Ideal for tying down
cargo •Contains two
24" and two 36"
bungee cords with rubber
tipped hooks •Cord diameter: 5⁄16"
Order #
22-9966
MSRP
$4.99
ONLY
$1.99
1" Heavy-Duty Metal Spring Clamp
•Small, toolbox sized clamps provide an
extra hand for wood, plastic, metal
wires, tarps, and many other
projects •Vinyl coated ends to
protect surfaces and provide
better grip •Heavy-duty
steel springs provide longer
life and greater clamping
strength •1" jaw width •4" overall length
ONLY
$84.99
Order #
22-9442
MSRP
$3.99
(1-4)
$1.79
Movers Dollies
#22-5122
•Great for moving furniture,
television, plants, and
appliances •Four swivel
casters for easy maneuvering.
•Padded ends for protection
Size
Max
Order # (L) x (W) x (H) Capacity Material
ONLY
22-9130 30" x 18" x 8"
1000 lbs. High-impact $49.99
plastic and steel
22-5120 30" x 1" x 5.6" 600 lbs. Wood
19.99
22-5122 18" x 12" x 5.25" 600 lbs. Wood
19.99
(5-up)
$1.57
Three Wheel
Dolly Caster Mover
•Ideal and easy way
to move heavy objects
from room to room •Soft
cushions protect surface of object you
are moving •1" casters •3" base width •2" high
Ratcheting Tie
Down Straps
Furniture Pads
4Moving pads for all needs and budgets
472' x 80"
Order #
Description
(1-11)
140-750
Premium grade
$19.99
140-755
All weather
10.99
140-760
Economical
12.99
(12-up)
$16.95
10.45
10.49
•1" x 15' ratcheting tie
down straps adjust from
4' to 15' in circumference
to secure cargo •Quick
and easy vinyl cushioned
thumb release with
automatic lock ratcheting
action •Vinyl coated hooks
prevent scratching surfaces
•800 lbs. maximum rated
capacity •Includes four straps
Order #
22-9664
Order #
22-9124
ONLY
$4.99
Elastic Strap Set
MSRP
$21.95
ONLY
$11.99
•A variety of color-coded elastic straps in a
convenient storage jar •Great for quick and
convenient load binding •Vinyl coated steel
hooks and woven polyester protect surfaces
from scratches Includes: •Ten pieces 12"
(white) •Ten pieces 18" (blue) •Ten pieces
of 24" (pink)
Order #
22-10176
ONLY
$9.99
Tie Down Set
Knee Pad
•Ideal for securing
luggage or cargo to carts
or vehicles •Contains two
1" x 16' tie down straps
with quick release buckles
•Protects knees from rugged
surfaces while providing excellent
support •Thick ¾" foam padding
ensures maximum comfort
•Length 16" •Mfr. #30246
Order #
22-10950
Order #
22-9968
ONLY
$1.99
Utility Rope
MSRP
$9.99
ONLY
$4.99
•Multi-purpose rope for any
application •Heavy-duty rot
and tear resistance •1⁄4" diameter
Order #
22-10166
ONLY
$8.99
20
Nylon “Bunji Type”
Stretch Cords
Tie Down Straps
This popular securing
method is ideal for any
application where material
must be secured while
transporting such as courier trucks and service vehicles.
Straps are manufactured using multiple strips of rubber
wrapped in woven nylon fabric. Each end has a hardened
metal, painted “U” hook with protective rubber saftey tip.
Features: Ratchet
tie down: •Nylon
webbing •Reinforced
ratchet •Two vinyl
coated “S” hooks
B
A
Buckle tie down:
•Reinforced
grommet and spring loaded buckle •Polypropylene
Fig.
A
B
B
Order #
140-670
140-675
140-680
Description
Ratchet tie down strap
Buckle tie down strap
Buckle tie down strap
Size
3
⁄4" x 15'
3
⁄4” x 30”
3
⁄4” x 60”
Tarpaulins
ONLY
$9.37
4.27
4.78
Follow us on:
Order #
22-1900
22-1903
22-1904
22-1905
Length
12"
34"
48"
72"
(1-9)
$0.60
1.83
2.35
3.06
(10-24)
$0.53
1.68
2.10
2.76
(25-up)
$0.47
1.36
1.78
2.35
•Reusable and incredibly
useful tarps •Reinforcing
rope inside of welded hem for
durability and stability •Rust
resistant grommets on sides
and corners •Great for use
as a protective covering
or canopy
Order #
22-9652
22-9654
22-9656
22-9658
22-9660
MCMelectronics.com
Size
6' x 4'
9' x 6'
12' x 8'
18' x 12'
24' x 18'
MSRP
$4.99
6.99
7.99
15.99
27.50
ONLY
$2.49
2.99
3.99
8.99
19.99
page
365
Section
20
Tools
Measuring Tools
QuikRead™
Tape Measure
4"
NEW!
6"
8"
Digital Calipers
12"
•Calipers for reading outer and inner diameters
•Digital LCD display gives a clear and accurate reading
•Switch between metric and SAE with a touch of a button
•Reads in increments of 0.0005" and .01mm •Hardened
stainless steel •Includes protective case •Uses SR44 1.5V
battery (included)
Order#
22-10720
22-8582
22-10724
22-10726
Length
4" (100mm)
6" (150mm)
8" (200mm)
12" (300mm)
MSRP
$44.99
49.99
59.99
74.99
ONLY
$17.99
24.99
28.99
44.99
NEW!
6"
150mm
12"
The Lufkin®
QuikRead™ 25'
tape gives you more
than just fractions
and decimal
equivalents, it reads
feet and inches
directly. That means it’s as easy to know that 103" equals
8'7" as it is to know that 24" equals 2'. Features: •Tough
ABS plastic body •Blade shows fraction and decimal
equivalents as well as a direct reading of feet and inches
•Steel reinforced end hook for longer blade life •Clear coat
blade protection for more durable markings
Order #
96-2190
ONLY
$9.99
Self Centering
Tape Measure
Using the Lufkin®
Self-Centering 25'
tape is amazingly
simple. To find the
center of the object
you’re measuring,
you just measure it, reading from the top row of black
numbers. Then, you look directly opposite the black
numbers to a row of red numbers to see the center
measurement. Measure to that number and you’ve
marked the center point of your work piece...it’s that
easy! Features: •Tough ABS plastic body •Blade with
self-centering markings •Steel reinforced end hook for
longer blade life •Clear coat blade protection for more
durable markings
Order #
96-2195
300mm
Dial Calipers
Length
6"
150mm
12"
300mm
Graduations
1/1000 inch
.02mm
1/1000 inch
.02mm
MSRP
$39.99
39.99
69.99
69.99
ONLY
$14.99
14.99
34.99
34.99
20
•Interchangeable end
hooks for user convenience
•Ring end hook snaps
onto stake for one-person
measurements •Standard
folding end hook for general
measuring needs •Appraiser's
hook attaches to oversized objects
such as downspouts •3-to-1
rewind for fast blade retraction
•3⁄4" blade is more durable;
large numbers are easy to read
•Two-sided blade, feet and
NEW!
inches on top, feet to 10ths and
100ths on bottom •62 fiberglass
strands and double-pvc coating for durability and
strength •Cushion grips on handle and frame arms
for comfort •Mfr. #PSFE100
Order #
96-2285
page
366
ONLY
$39.99
Order #
22-10160
ONLY
$4.99
Series HY1000
High Visibility
Measuring Tapes
Features bright yellow
high impact case, toppositioned toggle lock,
unbreakable end hook,
orange blade with black lettering and rubber shock
absorber to cushion blade return.
Order #
96-606
96-611
Mfr. #
Size
HY1425 1" x 25'
3
HY1312 ⁄4" x 12'
(ea.)
(2-4) (5-up)
$16.99 $16.95 $15.69
11.99 10.89 10.39
Digital Measuring Wheel
•The easiest and fastest way to
measure large areas without the
hassle of a measuring tape •Great
for use when landscaping, fencing,
or remodeling •Make more accurate
quotes •Lightweight aluminum handle
extends up to 261⁄4" •Digital LCD
display counter provides accurate
measurements in both feet and meters
•55⁄8" rubber wheel with PVC rim
•Requires two “AAA” batteries
(not included)
Order #
22-9622
ONLY
$19.99
Hammers
Electronic
Digital Caliper
•Accurately measures in inches and metric •6"/150mm
range •Switchable from inches to metric •Direct reading
for accuracy of .001"/.1mm •Measures outside, inside,
depth, and step
Order #
22-3385
100' Pro Series
Fiberglass Long Tape
•25' x 1" heavy-duty tape measure with 1⁄8" fraction
graduations •Auto-lock with push-button return
•Rubberized grip •Belt clip
ONLY
$7.79
•Calipers for reading outer and inner diameters •Dial
calipers give you a simple, analog reading, available in
SAE or metric •Shock proof •Hardened stainless steel
•Includes protective case
Order#
22-10710
22-10712
22-10714
22-10716
25' Tape
Measure
(ea.)
$73.99
(2-up)
$70.95
NEW!
16 oz. Professional Hammer
Fiberglass
Two-Sided Long Tape
•Open four-arm frame design
protects blade, does not trap
dirt in case •Lightweight but
strong case is easy to handle
and rewind •Two-material
grip is comfortable to use
•Hi-Viz® orange case is
easy to find on the job site
•Folding end hook for truezero measurements •Feet
and inches to 8ths; metric to millimeters, numbered in
centimeters •Yellow clad fiberglass blade impervious
to moisture •Blade style C4
Order #
96-2290
96-2295
Mfr. #
FM015CME
FM030CME
1-800-543-4330
Fax: 1-800-765-6960
Length
50'
100'
ONLY
$15.99
20.99
•Ergonomic no-slip handle provides outstanding grip for
a more controlled swing •Fiberglass handle core absorbs
shock •16 oz. polished alloy steel head •Magnetic nail
holder built into head
Order #
22-10182
ONLY
$7.99
Fiberglass Claw Hammer
•Durable fiberglass handle features a cushioned grip for
less fatiguing strikes •Curved claw for pulling nails and
prying •13" overall length •20 oz. weight •Mfr. #20401
Order #
22-9770
NET 30
Terms
ONLY
$18.99
Tools
Staple Guns and Wire Tackers
Wiring Tackers
Safety, speed, and
efficiency are built-in
performance factors
that have made Arrow
staple gun tackers the
preferred fastening
tools of professional
and wire and cable
installers in every field.
Four precision-made
Arrow models, using
a variety of different
staple types, fit a wide range of wire and cable diameters
for safe, snugger and neater fastening. All models below
feature: •All-steel construction •Grooved guide •Patented,
jam-proof mechanism •Short span, easy compression
handle •Chrome finish •Grooved driving blade •No matter
what the application, (telephone, speaker, DSS, alarm,
security, computer) there is an Arrow model that will
make your job easier and faster.
T59™ Wiring Tacker
Uses UL listed insulated staples. Shoots insulated staples.
Fits wires up to 5⁄16" in diameter. Ideal for RG-59 and RG-6
cable. Holds two strips of 15 insulated staples.
T25™ Wiring Tacker
Loads (85) T25 staples with 1⁄4" crown divergent point of
.050 wire in 3⁄8", 7⁄16", and 9⁄16" leg lengths. Fits wire up to 1⁄4"
in diameter. Ideal for RG-59 wire.
Order #
22-7450
22-7462
Mfr. #
T59
T25
Description
Wiring tacker Wiring tacker ONLY
$50.99
39.99
Insulated Staples (300/box) for Model T59
Order #
Mfr. #
Description
Color
1
22-7452 591188
⁄4" x 5⁄16"
Clear
5
5
22-7454 591189BL
⁄16" x ⁄16"
Black
ONLY
$6.99
6.99
Staples (1000/pack) for Model T18
Order #
Mfr. #
Description
3
22-7472 186
⁄8"
7
22-7474 187
⁄16"
ONLY
$2.85
2.15
Staples (1000/pack) for model T25
Order #
Mfr. #
Description
3
22-7464 256
⁄8"
7
22-7466 257
⁄16"
9
22-7468 259
⁄16"
ONLY
$1.99
2.79
2.79
•Shoots large insulated
staples for non-metallic
sheathed cable up to
19
⁄32" wide •Wire guide
perfectly centers cables
up to 1⁄2" wide •Onehanded operation makes
cable installation faster,
safer, snugger, neater,
and far easier than ever
before •Also fastens two
round cables up to 7.5mm wide with #22-9606 staples
•All-steel construction with chrome finish •Grooved
driving plate with wire guides •Patented jam-proof
loading mechanism
Order #
22-9600
ONLY
$49.99
B
General® Automatic Center Punches
•Replaceable threaded steel points •Adjustable for light
or heavy markings •Available in two different sizes:
Standard and pocket
Fig.
A
-
B
Order # 22-3192 22-3193 22-3194 Description
Standard
For hard woods
Dual wire groove
Inner Width
31
⁄64" (12mm)
31
⁄64" (12mm)
19
⁄32" (15mm)
ONLY
$7.99
7.99
8.19
Description ONLY
Standard center punch $25.99
Replaceable point for #22-3192 4.39
Pocket center punch 16.99
Automatic Center Punch
•Automatic spring-based mechanism, no hammer
needed •Knurled brass handle and hardened tip for
instant marking •5" length
Order #
22-10026
MSRP
$9.99
ONLY
$5.99
Clip Guns
Cable is
fastened
quickly,
accurately and
permanently,
with no chance
of damage
to the cable.
Loading is
easy. Each row
contains 25
clips, no more
fumbling with
tools and loose,
hard to control manual clips. Clips come 400 to a pack.
Order #
33-3985
33-3995
Mfr. # RB-2 06ES Description Single clip gun Single clips ONLY
$55.99
19.99
#22-10405
•Heavy-duty hand riveter with 90° head for
fastening rivets in a variety of materials •Spring loaded handle ejects
heads automatically •All steel construction with contoured rubber grips
•Four nose pieces for rivet sizes 1⁄8", 3⁄32", 5⁄32", and 3⁄16"
#22-10408
Hand Drill
Hand Drill Set
•Perfect for making small holes
in metal, ceramic, plastic, and
wood •Set comes complete with
a diamond knurled aluminum hand drill and 12 precision
drill bits, even WG sizes 52~74 (0.063"~0.028") •Brass
drill chuck •Magnetic cap holds drill bits in place when
storing them in the handle
Order # Description 22-3240 Hand drill set 22-3241 12 piece replacement drill bits
ONLY
$14.99
3.99
4.99
5.49
(1-4 sets) (5 sets-up)
$10.99 $8.79
6.89 5.69
Pin Punch
20
Description
Hand riveter
Aluminum rivets, 1⁄8" x 3⁄8"
A
Insulated Staples (300 per box)
Heavy-Duty Hand Riveter
Order #
22-10405
22-10406
22-10407
22-10408
20
Center Punches
T72 Wire and Cable
Staple Gun
Order #
22-9602
22-9604
22-9606
Section
Roll Pin Punch Set
•Soft horse-hair bristles are great for cleaning work areas without scratching
delicate surfaces •Sweeps up a variety of materials; from dust to bolts
•13" wooden handle •Bristle measurements: 7" (L) x 3" (W) x 21⁄2" (D)
•Nine piece set
for removing
pins in
mechanical
pieces •Drop
forged, heat treated
steel •Includes sizes:
1
⁄16" x 23⁄4", 5⁄64" x 311⁄4",
3
⁄32" x 31⁄2", 1⁄8" x 4", 5⁄32" x
41⁄2", 3⁄16" x 43⁄4", 7⁄32" x 5", 1⁄4" x
51⁄2", and 5⁄16" x 61⁄4"
Order #
22-9262
Order #
22-10400
Clean-Up Brush
13" Horse Hair Brush
Follow us on:
(1-5)
$5.99
(6-up)
$5.75
MCMelectronics.com
ONLY
$9.99
page
367
Section
20
Tools
Pocket Knives and Multitools
PowerPlay™
PT-525
A complete tool
kit that fits in
the palm of your
hand, designed
uniquely for
telecom, data
comm, security,
and electrical
work. This tool
was designed in
conjunction with, and manufactured by SOG®, renowned
for their uncompromising style and performance. It’s
lightweight, compact, and easily carried on your belt with
the included leather sheath. This single tool can cut and
strip Romex®, Cat 5e UTP, and other low voltage cables.
It can also cut holes for outlet boxes, connect low-voltage
cables, hook up power outlets, terminate voice/data jacks
and home networking modules, pull/push wires, and so
much more. A Compound Leverage® gear system provides
extra torque when needed, while offering easy one-handed
opening. Tools open effortlessly, and lock into place
during use. Remaining tools are protected with a
removable, pivoting handle cover. All tools are removable
and replaceable. Includes 24 tools: •Needle nose and
gripping pliers •110 and 66 punchdown tools •Five wire
strippers (12, 18, 20, 22, and 24AWG) •Cat 5e UTP
stripper •Romex® wire cutter •Drywall punch and saw
•#4 and #6 slotted screwdrivers •#1 Phillips screwdriver
•1⁄4" hex bit driver with adaptor •SOG® serrated knife
•3-in-1 file •Wire hook •Wire spudger •Bottle opener
•Ruler (inch and centimeter)
Order #
22-9480
ONLY
$94.99
Micra
Tool
NEW!
Ten useful tools are packed into this tiny,
lightweight, stainless steel Leatherman.
Perfect for a tool box, tackle box,
pocket or purse, the Micra
makes a great gift.
Tools Include: •420HC
Clip Point Knife •Extra-small,
medium, and flat Phillips
screwdrivers •Spring-action
scissors •Nail file/cleaner •Bottle opener
•Ruler •Tweezers •Key ring attachment
Order #
22-10550
ONLY
$24.95
#22-10540
Squirt® E4
The Squirt® E4 redefines the
term “ultra-compact”, giving
you the convenience of fullsized tools in one key-chain
size package. Includes: •20,
18, 16, 14 and 12 gauge wire
strippers •Electrical wire cutters
•Spring-action pliers •Small
and extra small screwdrivers
•Phillips screwdriver •Straight knife •Wood/metal file
•Tweezers •Bottle opener •Key ring attachment •Length:
2.25” closed •Weight: 1.9 oz. •Mfr. #82080001K
Order #
ONLY
$29.95
22-10325
#22-10542
#22-10544
Juice® Pocket Tools
#22-10546
NEW!
Designed to be compact and functional, these models are big enough to handle your jobs and
small enough to follow you wherever you need to go. All Juice® models include: •Black
leather sheath •Straight knife •Needlenose pliers •Regular pliers •Wire cutters •Screwdrivers
•Bottle opener •Lanyard ring Additional features are charted below:
Order #
22-10540
22-10542
22-10544
22-10546
#22-10540
Closed
Model
Saw
Serrated Knife
File
Awl
Scissors
Corkscrew
Xe6
X
X
X
X
X
X
Cs4
X
X
X
S2
X
C2
X
ONLY
$79.95
69.95
59.95
59.95
Scissors and Snips
NEW!
NEW!
#22-10505
All Purpose Snip
#22-10506
#22-10507
Spring Action Snips
20
•High leverage snips for use in electrical work and fiber
optics •Nickel chrome plating resists corrosion and rusting
•One blade is serrated for non-slip cutting action •Spring
loaded for self opening action •Handy closure lock for
convenient storage
Order #
22-10505
22-10506
22-10507
Mfr. #
24000
24001
24005
Description
High-leverage Kevlar® snip
Kevlar® shear
Filament scissors
ONLY
$38.99
39.99
24.99
All Purpose
Scissors
•Heavy-duty scissors
cut everything from
paper to 18 gauge
steel sheet metal
•Made of stainless
steel •Right-handed
Order #
22-970
page
368
(ea.) $5.99 (2-4) $5.38 (5-up)
$4.95
Stainless Electrician Free-Fall Snip
•Stainless steel blades to maintain blade durability and
sharpness •Blade is fully serrated for non-slip cutting
action •Free-fall snip feature for ease of use •Cuts 19AWG
and 23AWG wire •Extended handle provides comfort and
cutting leverage for wire cutting applications •56 HRC
rating •Mfr. #2100-8
Order #
22-10500
Order #
22-10185
ONLY
$3.99
ONLY
$24.99
Electrician’s Scissors
Reliable, multi-purpose
electrician’s scissors
are designed for use in
telephone and electrical
service applications.
Scissors cut up to
16AWG solid and
12AWG stranded wire.
Scissors operate smoothly and have a serrated surface on
the black blade edge to clean wire. Cutting edges remain
sharp after repeated use. Overall length: 5". Length of cut:
17⁄8". Made in USA. Electrician’s scissors with stripping
notches (#22-6265) strip 19 and 23AWG wire and have
serrations for non-slip wire cutting.
Order # Description
ONLY
22-6265 Electrician’s scissors w/stripping notches $15.99
22-6270 Electrician’s scissors
14.49
1-800-543-4330
Fax: 1-800-765-6960
•Cut cloth, carpet, linoleum, leather, cardboard, tin plate,
paper, branches, foam rubber and more •Micro tip for
precision cuts •Stainless steel spring and blades resist
rust and corrosion •Positive safety latch
Straight Tin Snip
•Nonslip serrated jaws
•Vinyl grips for control, safety and comfort •Convenient,
protective safety latch •Cuts straight or wide curves up to
18 gauge steel
Order #
22-1450
(ea.)
$19.99
(2-4)
$18.95
(5-up)
$16.95
10" Shop Shear
•Cuts cardboard,
industrial fabrics,
upholstery, rubber,
screen, leather, and more •Stainless steel blades for
corrosion resistance •Safety point •Handy rope notch
in lower blade •High leverage, comfort grip for right
and left hand use
Order #
96-2210
NET 30
Terms
ONLY
$12.99
Tools
Pocket Knives and Multitools
#22-10335
#22-10310
#22-8770
#22-8765
#22-9085
Multitools
#22-7890
#22-8750
#22-10315
#22-8755
#22-9090
#22-8757
Section
20
#22-8775
#22-8760
LIMITED
25 YEAR
WARRANTY
The original Leatherman Multitools have a solution for your every project. Pocket-sized tools feature high-quality accessories, sheaths, and bits. All tools feature: Knife, pliers,
wire cutters, hard-wire cutters, bottle/can opener, screwdriver, lanyard ring, ruler, wire stripper, all-locking blades, and removable pocket clip. Additional features are charted below
Double
Outside Mini
Weight Handle
Knife
Sided Cutting Serrated
Accessible Bit
Bit
Order # Mfr. #
Name
Length (oz.) Material
Material Sheath Bits Hook Crimper File Saw Knife Scissors AwlCarabiner Tools Driver Driver ONLY
22-10335 830682
Charge TTI™
4”
8.2 Titanium
S30V
Leather 8
X
X
X X
X
X
X
X $109.85
22-8770 830674
Charge ALX™ 4”
8.3 Aluminum
154CM Leather 9
X
X
X X
X
X
X
X 109.85
22-8765 830662
Charge AL™
4”
8.3 Aluminum
154CM Leather 8
X X
X
X
X
X
X 109.00
22-7890 68010101K Crunch™
4”
6.9 Stainless
Stainless Leather -
X
X
X
79.95
Steel
Steel
22-10315 830950
Skeletool CX™ 4”
5.0 Carbon Fiber 154CM Nylon
2
X
X
X
89.85
and Tungsten
22-9090 830158
Surge™
4.5” 12.5 Stainless Stainless Leather 2
X
X X
X
X
X
X
X
89.85
Steel
Steel
22-8775 830037
Wave™
4”
8.5 Stainless Stainless Leather 2
X X
X
X
X
X
X
79.85
Steel
Steel
22-10310 830948
Skeletool™
4”
5.0 Aluminum
420HC
Nylon
2
X
X
X
69.99
22-9085 830144
Core™
4.5” 10.8 Stainless
Stainless Leather -
X
X X
X
X
59.85
Steel
Steel
22-8750 830030
Blast™
4”
6.9 Stainless
Stainless Leather 1
X X
X
X
49.95
Steel/Zytel
Steel
22-8755 830023
Fuse™
4”
6.0 Stainless
Stainless Leather -
X
X
31.95
Steel/Zytel
Steel
22-8757 830597
Knifeless Fuse 4"
6.0 Stainless
N/A
Leather
X
X
39.95
Steel/Zytel
22-8760 830016
Kick™
4”
5.2 Stainless
Stainless Leather -
29.99
Steel/Zytel
Steel
NEW!
A
#22-10555
B
Bit Kit
C
The Bit Kit expands your driver’s capabilities with
42 tool steel bits. Exclusively fits Leatherman pocket
tools. Kit Includes: •Hex 1.5mm and 2mm •Hex 2.5mm
and 3mm •Hex 4mm and 5mm •Hex 6mm and 1⁄4" •Hex 7⁄32"
and 3⁄16" •Hex 5⁄32" and 9⁄64" •Hex 1⁄8" and 7⁄64" •Hex 3⁄32" and 5⁄64"
•Hex 1⁄16" and .050" •Robertson #3 and #2 •Robertson #1
and Pozi •Pozi #2 and #1 •Torx #10 and #15 •Torx #20
and #25 •Torx #27 and #30 •Phillips #0 and #3 •Phillips
#1 and #2 •Slotted 3⁄32" and 1⁄8" •Slotted 5⁄32" and 3⁄16" •Slotted
7
⁄32" and 1⁄4" •Phillips and flat tip eyeglasses screwdriver
•Nylon sheath •Mfr. #934870
Order #
22-10320
#22-10565
20
#22-10560
ONLY
$14.95
Follow us on:
25
Pocket Knives
YEAR LIMITED
WARRANTY
•Featuring Leatherman’s patented Blade Launcher, these
are the easiest knives you’ll ever own •Extra strength
glass-filled nylon handles •Removable pocket clip
•Locking blades for safety •Thumb stud •Individual
features below
Knife
Blade Bit
Partial
Order # Mfr. # Material Length Driver Serration ONLY
22-10555 C33B 420HC
2.6"
X
$39.95
22-10560 C33L 420HC
2.6"
24.95
22-10565 E55Bx 154CM 3.1"
X
X
69.85
Lightweight Lockback Knives
NEW!
•Drop point blade is AUS 8 stainless-steel hardened to
58-59 Rc •Reversible thumb stud provides easy, onehanded opening •Corrosion restraint handles •Includes
removable pocket/belt clip •Made in Japan
Fig.Order #
A 22-10520
B 22-10521
C 22-10522
MCMelectronics.com
Mfr. #
44001-BLK
44006
44007
Blade
21⁄2'' drop point
25⁄8'' sheepfoot
21⁄2'' coping
ONLY
$37.99
36.99
39.99
page
369
Tools
Section
20
Utility Knives
35 Piece
Hobby Knife Set
Bi-Metal Blue Blades
Bi-Metal Snap Knife
•Auto blade lock
automatically prevents
blades from being pulled out
•Hinged end cap with snap
closure swings open for easy
reloading •Internal blade storage conveniently holds three
extra blades •Stainless steel blade guide •Includes one
bi-metal snap blade stick
•Spring steel body delivers
superior flexibility to prevent
breaking and added safety •Highspeed steel cutting edge stays sharp longer than traditional
carbon utility blades •Fits most utility knives
Order # Qty. per pkg. (1-4 pkgs.) (5-9 pkgs.) (10 pkgs.-up)
22-10112
5
$1.99
$1.84
$1.59
22-10114
50
19.99
18.50
15.75
Order # Description
(1-4) (5-9) (10-up)
22-10116 Snap knife
$7.99 $7.49 $6.79
22-10118 Three-pack bi-metal refills 2.49 2.29 1.99
Order #
22-9752
RWK Series Replacement
Utility Knife Blades
Folding Utility Knife
•Blade safely folds into handle
for compact size •Quick-change blade
release for fast replacement •Blade lock
adds safety when open •Rust-free steel design for
durability •Convenient belt clip adjusts for left or right
hand use •Interchangeable thumb release allows left or
right hand use •Soft-grip ergonomic handle design for
increased comfort
Order #
96-2260
96-926
Mfr. #
WKFQ4R
RWK-14V
Description
Folding utility knife
Five pack utility blades
ONLY
$11.99
1.99
All Wiss replacement blades are designed
to fit Wiss utility knives as well as most
standard utility knife designs. They are
manufactured of high quality USA
manufactured steel and are designed for
maximum durability. Blades are packaged
five per card. Mfr. #RWK-14V.
Order #
96-926
(ea.)
$1.99 (2-4)
$1.79 (5-up)
$1.54
•Retractable standard sized utility blade •Use to
quickly cut boxes, straps, cables, and more •Auto loading
mechanism slips the old blade out and new blade in within
seconds for safety and convenience •Stores up to five
blades (included) in handle reservoir
Order #
22-9176
Order #
22-825
(ea.) $2.49 (2-4) $2.39 (5-up)
$2.29
•Rugged, lightweight
tubular frame
instantly adjusts for 10" or 12" blades •Handle has two
locating pegs, for vertical or horizontal cutting •Spare
blades can be stored in frame •Replacement 12" blades
are available in 18TPI or 24TPI, two pieces per package
Order #
22-390
Order #
22-1035
(ea.)
$4.69
Description
Replacement blades, 5/pkg.
370
ONLY
$1.49
Description Light-duty knife Fine point blades, 5/pkg.
Standard blades, 5/pkg.
•Convenient bench dispenser
•100 pieces
Order # Mfr. # Description
ONLY
22-7598 10-788 Quick Blade Change Utility Knife $14.99
22-7599 11-921 Replacement blades (5/pk)
1.69
Description
ONLY
4-in-1 hacksaw w/ two blades $37.99
Hacksaw blades, 18-TPI, 2/pkg. 3.89
Hacksaw blades, 24-TPI, 2/pkg. 3.89
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$2.89
2.49
3.99
100 Piece
Standard Sized Utility Blades
•Swing out blade storage for easy blade access
•Integrated string cutting feature •Furnished with three
heavy-duty blades •Large hang hole •Retractable slide
•Standard 90° for general
use •45° angle for flush cuts
•Low profile position for tight
spaces •Jab saw configuration for a variety of inside cuts
•High tension for tightening the blade up to 30,000 psi
•Cushion grip handle for better control and comfort
•Magnetic blade storage inside frame •Includes one
Nicholson® Bi-Metaloy® 18-TPI 12" hacksaw blade
and one Nicholson® 8" x 3⁄4" x 0.035" HSS Bi-Metal
reciprocal saw blade
page
(5-up)
$3.89
Light-Duty Utility Knife
Order #
22-10395
ONLY
$12.99
File Sets
Twelve
Piece Precision
Needle File Set
4-in-1 Pro
Series Hacksaw
Mfr. #
80975
62826
62832
(2-4)
$3.99
•Designed for light-duty cutting on paper, wood, and light
materials •Comes with fine point blade and protective
cover •Replacement blades available in fine point or
standard, five pieces per package
Contractor Grade™
Quick Blade Change Utility Knife
Description ONLY
Hacksaw
$11.99
Replacement blades, 18TPI, 2/pkg.
3.89
Replacement blades, 24TPI, 2/pkg.
3.89
20
•General purpose knife •Lightweight, yet sturdy enough
for production work •Uses standard blades •5⁄16" diameter
•Replacement blades available (#22-1035) •Five blades
per package
Order #
96-1189
96-1190
96-1191
ONLY
$9.99
General
Purpose Hacksaw
Order #
96-2264
96-1162
96-1163
ONLY
$14.99
Utility Knife
•Blue enamel finish •Five blades included
Saws
Order #
96-1161
96-1162
96-1163
MSRP
$22.99
Retractable
Utility Knife
Heavy-Duty Auto Change Utility Knife
A complete
hobby knife kit
that includes three
handles, a mini
wood plane, edge
adapter, sanding
block, blade
handling tweezers, 25 different blades, and three
scratch awls. All pieces are organized and easy
to select in a latching hard-plastic case.
File Set
•Manufactured from high
carbon alloy steel •Soft grip
handles with hanging holes
•File blades measure 8" in
length •Contents: Flat, halfround, round, square and
triangular files
Order #
MSRP
22-10024 $17.99
ONLY
$9.99
These exceptionally
crafted files
are designed for a
whole range of fine
applications. Easy to
grip nylon handles
provide better control.
A wide variety of
shapes are included
and packaged in an individually organized pouch. Each
1
is 6 ⁄4" long.
Order #
22-2265
NET 30
Terms
ONLY
$5.24
Tools
Wire Crimpers
SARGENT
YEAR LIMITED
1WARRANTY
Ratcheting
Crimp Tool
•Crimps “D”
Sub pin and
socket contacts
with 20~30AWG wire •AMP compatible •Mfr. #SP1364
•Designed to
crimp non-insulated terminals and connectors ranging
from 6~12AWG •Heavy-duty ratcheting mechanism for
prolonged use •Cushioned grips •Tool length: 10"
Order #
22-3162
Order #
22-7686
ONLY
$99.99
3100 Series O.E.M Compatible Crimp Tools
ONLY
$19.99
YEAR LIMITED
1WARRANTY
These tools have been designed and manufactured to conform to commercial
specifications as established by the connector manufacturers. The 3100 series
features: •Crimp cavities conform to industry standards •Longevity of operation
is assured with this time tested tool frame •The simple trouble free full cycle
mechanism assures consistent terminations •Each tool is precisely engineered
for a specific terminal and wire gauge requirement •Made in USA •Tool weight:
14 oz. •Length: 9"
O.E.M. Compatible Hand Tool Order #
Molex
HTR 1031E
11-01-0084
Molex
HTR 1719C
11-01-0008
Molex
HTR 2262
11-01-006
Molex
HTR 2262A
11-01-0037
Molex
HTR 2445A
11-01-0026
•Works with UR, UY, and UG
style splice connectors •Prevents
incomplete and uneven crimps
•Stepped jaws provide parallel
crimping action at the moment
of connection
ONLY
$4.99
Ratcheting Crimp Tool
•Crimps insulated solderless terminals for wire
gauges 22~10 •Ratcheting action ensures a full crimp
cycle for positive connections •Locks in the closed
position for storage
Order #
22-770
(ea.)
$17.99 (2-4)
$17.50 (5-up)
$16.98
Terminal Designation .093 pin & socket
.125 pin & socket
Male/female terminals
.062 pin & socket
(ea.)
(2-4)
(5-up)
$109.00 $104.64 $100.45
121.00 118.00 112.00
Designed for solderless terminals from 10~22AWG.
Also features insulated handles and handy wire cutters.
.093 pin & socket
121.00 118.00 112.00
Order #
22-1780
.062 pin & socket
KK Crimp terminals
KK Crimp terminals
121.00 118.00 112.00
99.99
94.95
89.95
91⁄2" Crimp Tool
(ea.)
$9.99
(5-up)
$8.49
•Use with UR/telephone
splicing connectors #28-0755
and B-wire connectors
•Cushioned grip for comfort and
protection •Built-in wire cutter
(ea.) $10.99 •Crimps a wide variety of open barrel contacts in medium
size wire ranges •Crimps conductor and insulation portion
of contacts in separate cavities •Tool must be closed twice
to complete termination •Insulation crimps are “B” type
and are produced in two cavities: A 18~14AWG and B
24~20AWG •Conductor crimps are “B” type and are
produced in three cavities: C 16~14AWG, D 20~18AWG
and E 24~22AWG •Mfr. #1028CT
IDC
Crimp Tool
Order #
22-9015
Order #
22-1025
ONLY
$24.99
(2-4)
$8.99
UR Crimping Tool with Cutter
Order #
22-961
“B” Type
Conductor and Insulation Crimping Tool
IDC Crimp Tool
Order #
22-10200
20
“D” Sub
Crimp Tool
Order #
Mfr. #
22-7954 3132CT
22-7956 3133CT
22-7958 3134CT
22-7960 3135CT
22-7962 3136CT
Section
(2-4) $9.81 (5-up)
$8.69
•For crimping
insulation
displacement
connectors •Crimping distance from 6mm~27.5mm
•Cushioned handles •All steel construction
(ea.) $16.49 (2-4) $15.78 (5-up)
$14.73
Pick-Up Tools
24" Pick-Up Tool
Order #
22-9724
MSRP
$3.99
ONLY
$1.99
LED Lighted
Magnetic Pick-Up Tool
LIFETIME
WARRANTY
Telescoping Magnetic Pocket Pick-Up Tool
•Powerful magnetic pick-up tool retrieves items up to
4 lbs. •Telescopes 53⁄16"~25" •Pen size with pocket clip,
easy to carry •51⁄2" closed •Lifetime warranty
Parts Picker Upper
Order #
22-3500
Order #
22-125
(1-9)
$3.59
•Magnetic tip retrieves small parts and screws from
confined areas •Bright LED illuminates area to help
find lost parts and tools •Telescopes from 71⁄2" up to
313⁄4" •Cushioned handle with grip •Includes three
replaceable AG13 batteries
Magnetic Pick-Up Tool
Order #
22-9296
Order #
22-6320
ONLY
$5.99
Follow us on:
20
•24" spring-style shaft is flexible to squeeze into many
tight places •Claw end can grab most items up to 5⁄8" •Great
for picking up tools and parts lost behind benches or down
in cases
(10-24)
$3.29
(25-up)
$2.59
•For retrieving parts from hard-to-reach areas
(ea.)
$2.99 (2-4)
$2.87 (5-up)
$2.76
•Powerful heavy-duty magnet picks up metal objects up to 4 lbs. •Great for
retrieving objects at hard-to-reach angles and around obstructions •Length: 24"
ONLY
$4.99
MCMelectronics.com
page
371
Section
20
Tools
Coax Crimpers
Ratcheting Hex
Type Crimp Tool
for RG–58/59
Compression
Multi–Tool
The compression multi–tool is designed to compress
the ferrules of all three MCM compression connectors;
“F”, BNC, RCA. Black oxide steel frame with
interchangeable die sockets. Ratchet mechanism,
with manual release, releases after a complete cycle
ensuring a fully compressed ferrule. Integrated cutter
for cutting coax cables to appropriate length.
Order #
22-3251
Hex Type Crimp Tool
•For use on all RG-59 and RG-6 connectors with
up to a 1⁄2" ferrule
Order #
22-100
(ea.) $14.99
•Compresses RG-6
and RG-59 Snap-NSeal type connectors •Cushion handles for better grip
and comfort •Overall length: 81⁄2"
™
Order #
22-3250
ONLY
$34.99
1
YEAR LIMITED
WARRANTY
Uni-Seal
Combo Drop Tool
•This universal drop tool
is designed for use with
environmentally sealed
RG-6/59 and RG-11/7 male
drop compression connectors
produced by Thomas & Betts,
Gilbert, PPC, Antec/Digicon,
and others •A movable yoke
allows quick change over
from RG-6/59 to RG-11/7
connectors •Toggle action assures complete connector
sealing eliminating the need for a complicated ratchet
mechanism •Ergonomic design minimizes user fatigue
•Made in USA •Weight: 8 oz. •Length: 8"
Order #
22-7952
Mfr. #
9000US
(ea.)
$79.99
YEAR LIMITED
1WARRANTY
(2-4)
$75.95
A
•Use with
RG-58 and
RG-59 connectors with up to a ⁄8" ferrule •1.7mm
standard crimp for crimping center conductor on
BNC and TNC connectors
3
Order #
22-925
(ea.) $20.99 B
Fig.
A
B
Order #
22-3163
22-3164
Mfr. #
1098 CT
3195 CT
ONLY
$49.99
69.99
(5-up)
$18.80
•For use with
MCM precision
“F” connectors
•Works with any
connector with
outside diameter of .361" and .472" •Black oxide
laminated jaw •Cushion grip for comfort •Length: 81⁄2"
Order #
22-7905
(ea.)
$20.49
(2-4)
$19.43
(5-up)
$17.81
A
Fig.Order # Mfr. #
A 22-3435 3161CT
B 22-3440 3162CT
B
The 3100 Series Crimp
Tools are designed to
crimp a variety of CATV
connectors. This series
has been the choice of
professionals for over two
decades. The crimp cavities
are fully machined in high
carbon steel, then heat
treated. Each tool has a full
cycle mechanism with an
emergency ratchet release
level. 8" in length.
Description
ONLY
Crimps RG-6 universal
$47.49
ribbed connectors to a
.360 hex and crimps RG-59
connectors to a .324 hex
Crimps RG-11 connectors 49.99
to a .470 hex and crimps
RG-6 and RG-59 universal
ribbed connectors to a
.360 hex
NEW!
Adjustable
Compression
Tool
Snap-N-Seal Stripper
and Installation Tool
•Crimps RG-59 and RG-6F, BNC, RCA compression
connectors on coaxial cable •Fast and reliable solution
to home theater, CATV, satellite systems and security
applications •Delivers the most permanent and best
quality connection •Universal design works with
most compression connectors •Mfr. #CP-313
•Works for both RG-6
and RG-59 type “F”
connectors •Lever-action
for easy compression
•Built-in coax cable
stripper •Viewable indicator allows assurance that
connector is fully compressed •Mfr. #IT1000
Order #
22-10820
Order #
22-9374
page
372
ONLY
$17.99
Order # 22-7360
ONLY
$20.99
Replacement Die Sets
Order #
Hex Size
22-7365
.256", .213", and .068" pin
22-7375
.319", .256", .213", and .068" pin
ONLY
$9.99
7.95
SuperCrimp
Crimp Tool
•Heavy-duty
ratchet crimp
tool provides
repeatable,
reliable
terminations •Crimp release provides operator safety
•Dies change quickly with a screwdriver, interchangeable
dies provide versatility in a single tool •Lower handle
force 40-50% •Overall length: 11"
Order #
Description ONLY
22-5205
Crimp tool frame
$19.99
Replacement Die Sets
22-5215
RG-58, RG-174, RG-8218
8.99
for both 50 and 75ohm cables
22-5225
RG-59, RG-6, “F” type CATV 8.29
connectors (Hex 0.350, 0.320, 0.255)
22-5230
Cambridge CP-88, CP-89 BNC/TNC 8.99
coax connectors with RG-58, RG-59/62
AU cables (Hex 0.305, 0.068, 0.228)
3100 Series
CATV Crimp Tools
SARGENT
•Designed for compressing
Snap-N-Seal™ connectors
•1098CT is a return spring
type and 3195CT is a
ratcheting type •Both
compress RG-6 and
RG-59 type connectors
(2-4) $20.08 Hex Crimp Tool
(5-up)
$67.95
Compression Tools
for Snap-N-Seal™
(5-up)
$12.61
Hex Type with
1.7mm Crimp
20
(2-4) $13.50
ONLY
$39.99
“F” Connector
Compression Tool
•Ratcheting action
holds connector securely while
crimping •Cushioned grip •Locks in the closed position
for storage •1.7mm hex for crimping center conductor
on BNC or TNC •Includes one #22-7365 die set
1-800-543-4330
Fax: 1-800-765-6960
HS5030 CATV
Holster Set
The HS5030
CATV Holster
Set includes:
•1098 CT
compression
tool designed
for compressing
Snap-N-Seal
connectors •8700 ES
Stripping Tool with
replaceable blade
cartridge for RG-59/6 cable •Canvas storage pouch
Order #
22-3415
Mfr. #
HS5030
ONLY
$69.99
“F” Connector
Insertion Tool
•Designed to make installing “F” connectors fast and
easy •Reduces risk of injury due to puncture from center
conductor •Thread “F” connector onto tool, which acts
as a handle for better leverage •Made of hardened steel
•5" length
Order #
22-1030
(ea.)
$12.99
ONLY
$169.00
NET 30
Terms
(2-4)
$12.47
(5-up)
$11.97
Tools
Modular Crimpers
Section
NEW!
EZ-RJPRO™ Crimp Tool
EZ RJPRO™ HD
Crimp Tool Kit
•Provides a ratcheted, high-leverage, ultra-stable platform
for consistent terminations •Perfect for heavier gauge
wires •Tool steel die head assembly provides 360° of
connector support during crimp •Built-in wire cutters
and strippers •Crimps and trims extended wire in EZ
connectors in a single cycle •Compatible with all other
RJ-45, RJ-12 and RJ-11 modular plug connectors except
AMP Kit includes •EZ-RJPRO™ HD crimp tool •50
EZ-RJ45® connectors •Round wire and cable cutter
•Cat 5 cable jacket stripper
Order #
22-10805
22-10800
Mfr. #
100016MCM
100054C
Description
ONLY
Kit
$109.00
HD crimp tool only
67.99
NEW!
#36-1655
The professional’s choice for working with RJ-45
Cat 5/5e, Cat 6, and RJ-12/11 connections. •Crimps
and trims extended wire in EZ-RJ45® and EZ-RJ12/11®
connectors in a single cycle •Ratcheted straight-action
precise crimping ensures a uniform crimp every cycle
•Ergonomic rubber-gripped handle •Heavy-duty all steel
frame with rust-resistant finish for years of intense use
•Compatible with all other RJ-45, RJ-12/11 connectors
(except AMP) •Use with strain relief connectors
(#27-5060) for certified Cat 6 networking •UL
rated •Made in USA
Order # Description
(1-3) (4-up)
22-9200 EZ RJ45 Crimp Tool Pro
$73.99 $68.95
22-9201 Replacement trimming blades 4.99
4.75
for EZ RJ12/11 cavity - 2pk
22-9202 Replacement trimming blades 4.99
4.75
for EZ RJ45 cavity - 2pk
36-1640 EZ RJ-45 CAT5e connectors - 50pk 31.99 27.95
NEW!
•Crimp tool
contains three
separate crimp
cavities for a
variety of terminations including: •Ratchet mechanism
with quick release assures optimum termination •For use
with the following modular plug connectors, stranded and
solid: RJ-45 Cat 3/5/5e/6, RJ-12 and RJ-11 Kit Includes
•Modular plug crimp tool •Coax and round wire cable
cutter •Cat 5/Cat 6 cable jacket stripper •Six in one
screwdriver •Nylon zippered case
Order #
22-10780
22-10785
Mfr. #
90145MCM
12503
Description
Kit
Crimp tool only
ONLY
$54.99
29.99
•Designed
for 4/6/8 pin modular connectors •Strips twisted pair wire
and flat wire •Ratcheting design assists in smooth crimps
•Mfr. #CP-376TR
Order #
22-10815
This high quality, all steel crimping tool is designed
to crimp 4P4C and 4P2C handset plugs. Tool also has
built-in wire cutter and stripper. Tool is 71⁄2" in length.
Order #
22-3770
(ea.)
$11.99
(2-up)
$10.18
•For installing 8 pin modular plugs (RJ-45) •Crimps keyed
or unkeyed RJ-45 connectors •Steel construction good for
thousands of crimps •Built-in cutter/stripper •Cushioned
grips reduce fatigue
Follow us on:
(1-9)
$14.99
The Platinum Tools patented connectors simplify
RJ-11/12, Cat 5 and Cat 6 terminations by allowing wire
to be extend beyond the front of the connector. This allows
you to easily verify proper wire order before cutting the
excess. By seating the cable jacket tightly in the front of
the connector, mechanical reliability is improved. This also
maintains the maximum number of wire twists, which is
the key to having optimal electrical performance. Platinum
Tools makes it easy to get the job done right. Simply select
the solution that’s right for you.
Features: •Simple one piece design •No bars or liners
•Patented crimp tool works for RJ-45 and RJ-11/12
connectors •Use in Cat 3, 5e and 6 networks and patch
cords •FCC compliant •50 micro inch gold plate
•UL rated •Made in the USA
(1-3)
$12.99
(4-up)
$11.49
Kits
Order # Description
(1-3)
36-1650 EZ RJ-45 kit - crimp tool + $79.99
50 Cat 5e connectors
27-5060 EZ RJ-45 Cat 6+ combo - 31.99
30 connectors and strain reliefs
Connectors
Order # Description
(1-3)
36-1640 EZ RJ-45 Cat 5e $31.99
connectors - 50pk
27-5065 EZ RJ-45 Cat 6+ 37.99
connectors - 50pk
27-5070 EZ RJ-45 Cat 6+ 334.00
connectors - 500pk
Strain Reliefs*
Order # Description
(1-9)
27-5075 EZ RJ-45 Cat 6+ $12.99
combo blue strain reliefs - 50pk
27-5095 EZ RJ-45 Cat 6+ 12.99
combo green strain reliefs - 50pk
* For use with the EZ RJ-45 Cat 6+ connectors only.
(4-up)
$76.95
30.95
(4-up)
$27.95
35.95
323.00
(10-up)
$11.79
11.79
(10-up)
$13.25
Dual Chamber
Modular Plug
Crimp Tool
Modular
Crimping
Tools
•Two step
tool is used
for installing
modular
plugs on flat
silver satin
type wire •#36-805 includes an insert making
it compatible with handset style plugs as well as
standard RJ-11 style, four pin style plugs •#36-640
works for RJ-12, six pin type •Sorry-no mixing of
types for quantity pricing
Order #
36-805
36-640 EZ-RJ45 Category 4/6 Connector System
Type
RJ-11 Standard and handset
RJ-12 (6 pin)
(1-9) (10-up)
$2.99 $2.79
2.99 2.79
The 7600 Series Dual Chamber Mod Plug Crimp
Tool provides cutting and stripping functions of twisted
pair cable along with two in-use chambers for crimping
modular plugs. This lightweight composite design accepts
color-coded interchangeable dies to satisfy numerous
applications including RJ-22, RJ-11, RJ-45 stewart, RJ-45
AMP, and ten position plugs. •Compound action produces
high crimping force with minimum hand pressure
•Replaceable cutting and stripping blade facilitates the
no-nick preparation of twisted pair cable •RJ-11/RJ-12
blue six position and RJ-45 yellow eight position
•Crimps conductor and strain relief on AMP and
WE/SS configurations
Order #
22-9585
MCMelectronics.com
ONLY
$59.99
page
373
20
Modular Telephone Plug Crimping Tool
ONLY
$16.99
RJ-45
Crimping Tool
Order #
36-660
#27-5060
Tools
Order # Description
36-1655 Cable jacket stripper
Telecom
Crimping
Tool
Modular Plug
Crimp Tool Kit
20
Section
20
Tools
Wire Strippers
Precision
Cutter and
Stripper
2-in-1 Wire
Stripper and Cutter
Stripmaster®
Stripmaster®
and
Lite Wire Strippers
•One-step stripping enhances
productivity •Spring-action
motion increases leverage
and reduces operator fatigue
•Precision-ground, knife type
blades provide clean, accurate
stripping •Sturdy die-cast
frame provides long term
durability •Wire gripper holds wire securely in position
®
•Stripmaster Lite designed for smaller hands 3⁄4 size of
the standard Stripmaster®
Order #
22-3045
22-3046
22-7436
22-7437
22-7438
Description
ONLY
Stripmaster® strips wire 10~22AWG
$37.99
Stripmaster® Lite strips wire 16~22AWG 47.99
Stripmaster® for RG-6 39.99
quad-shielded coaxial cable
®
Stripmaster for RG-58 coaxial cable
39.99
Stripmaster® for RG-59 coaxial cable
39.99
•One simple tool completes
most wiring needs •Hardened
stainless steel with comfortable
vinyl grips •Self-adjusting stripping
jaws •Stripper capacity: 26AWG~14AWG •Cutting
capacity: 1.2mm copper wire
Order #
22-10188
ONLY
$9.99
Order #
22-9482
(1-2)
$9.99
(3-up)
$8.99
20
Self-Adjusting
Combination Wire Stripper
This self-adjusting stripping
and cutting tool is ideal for a wide
variety of insulated wires and cables
including PVC insulations, power wire,
equipment wire, and communication
cables. Features: •Strips wires from
34~8AWG without adjustment, the
widest stripping range of any tool
of its type •Easily interchangeable
stripping blade cassette enables
precision stripping of a wide range of insulation types
from PVC to PTFE with just one tool •Ergonomic
design guarantees comfortable, stress-free operation •Fine
adjustment ensures that thin insulations can be stripped
without damage to conductors •Tested to over 150,000
cycles Replacement blade is available (#96-1960).
Order # Description
96-1955 Self-adjusting combination wire stripper
96-1960 Replacement straight blade
ONLY
$69.99
24.49
•A single tool that
cuts, strips, and
trims coax cable
•Single-step coax
stripper with built-in stop for perfect lead length •Fixedblade cartridge for 18 and 24AWG center conductors
(RG-58/59/6) •Dial-adjusted cable jacket slitter for
multi-coax cables •Impact resistant polymer and
ergonomic design
Order #
22-10055
MSRP
$19.95
(1-5)
$11.99
(6-11)
$10.75
(12-up)
$9.99
Multi-Tasker™
Wire Stripper
The Multi-Tasker™ eliminates
the need to interchange strip cartridges for dual cable
applications. •Molded in the stripper body are nests for
RG-6/RG-59 and RG-11/RG-7 drop connectors to assist
in cable insertion that control the center conductor foam
core depth •Includes additional die storage compartment
for further versatility
Order #
Description
22-9592
For RG-6, RG-59, RG-11, RG-7
22-9594
For RG-6, RG-59, UTP (twisted pair)
Replacement cartridges
22-9595
RG-6, RG-59
22-9596
RG-11, RG-7
22-9597
UTP (twisted pair)
ONLY
$23.99
23.99
5.99
5.99
5.99
(2-up)
$4.79
•Patented 90° bent nose allows for easy work in confined
spaces •Quickly removes outer jacket of Romex® cable
•Strips, cuts, and loops 10, 12, or 14AWG solid wire
•Cleanly shears 6-32 and 8-32 screws •Serrated nose
bends, shapes and pulls wire •Klein-Kurve® comfort
grip handles
Mfr. #
K90-10/2
K90-12/2
K90-14/2
•Quickly and easily
strips RG-58, RG-59,
RG-6, and RG-62
coaxial cable •Adjustable blades make perfect three-level
strips in dual and quad shield cable •Length: 4.5"
Order #
22-9110
ONLY
$11.99
Coax Cable Strippers
•Quick and easy stripping
of coax cable for satellite
and CATV •Strips insulation, shielding, and dielectric
in one easy step •8700 ES strips RG-59/6 and 8710 ES
strips RG-7/11 and both provide storage for an additional
cartridge •8720 ES strips RG-59/6 and RG-7/11
Order # Mfr. # Description ONLY
22-3155 8700 ES RG-59/6 stripper $15.99
22-3157 8720 ES RG-59/6 & RG-7/11 stripper 20.99
Order #
22-9590
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$21.99
For NM-B Type
10/2
12/2
14/2
ONLY
$26.99
26.99
26.99
Coaxial Wire
Stripper
•Tool specifically
designed to quickly and
easily strip RG-59 and RG-6 cables for CATV “F”
connectors •Built-in stop (no adjustments needed)
•Replaceable blade cassette lasts 1,000~2,000 strips
•Convenient built-in belt clip
Order #
96-1520
ONLY
$10.49
Coaxial
Cable Stripper
This effective cable stripper allows you to get into tight places where other tools
won’t fit. Stubby™ eliminates the need to run new cable when the short stub-in
is just out of reach for conventional strip tools. This tool is rotated in a natural
screwdriver-type motion and will not nick the braid or score the center conductor.
Works with RG-59 and RG-6 cabling.
374
(ea.)
$4.99
Romex® Stripper/Cutters
Order #
22-10515
22-10516
22-10517
Stubby™ Coax Stripper
page
Order #
22-3775
Drop Trimmer
Cable Stripper
Automatic Wire Stripping Tool
•2-in-1 wire stripper and cutter •For wire
0.2mm~8mm •Self-adjusting mechanism
provides a clean strip without damaging
the conductor •Handy separate cutting jaws
work with a simple squeeze •Adjustable
stop for consistency in wire strip lengths
•Strips multiconductor flat wire up to
a 1⁄2" wide •Adjustment dial for blade
pressure to match varying hardness
and thickness of insulators •Size and
operation make it great for use with
gloves •Not for use with Teflon® or asbestos insulation
•Cuts and strips both solid
and stranded wire 10~30AWG •Constructed of high
carbon steel •Adjustable screw stop for different wire
sizes •Cushion grips
Cable
Jacket Stripper
This precision stripping tool is ideal
for removing the jacket from telephone,
data, signal, audio, and instrumentation
copper and fiber optic cables. Features:
•Precise: Fine adjustability and
repeatability assured by nine position
blade cutting depth adjustment •Easy to
use •Safe smooth lightweight design; no
exposed blades •Strips the jacket from
most cables up to 0.43" in diameter
•Durable: Tested to over 50,000 cycles •Replacement
blade is available (#96-1950).
Order #
96-1945
96-1950
Description
Cable jacket stripper
Replacement blade
ONLY
$24.99
8.39
Universal Cable Slitter
•Adjustable cutting depth •Eliminates need
for two tools; works with cable .18"~1.4"
(4.5~35mm) •Cable supported during use
•Cable support arm can be used to pry off
thick insulation •Laser-trimmed, stainless
steel blades •Spare blade included •Great
tool for mid-point taps
Order #
22-9378
NET 30
Terms
ONLY
$26.99
Tools
Wire Strippers
Section
20
Reflex™ T®-Stripper
Wire Stripper
•Compact, lightweight wire-stripping and cutting tool
•Narrow nose fits into tight places •Hardened steel with
precision ground stripping holes •Not for use on cutting
steel wire or bolts •Spring-loaded action for self-opening
•Precision-ground stripping holes for easy removal of
insulation •Easy-to-read wire gauge markings on both
sides for stripping in either direction •Black-oxide
finish resists corrosion •Textured handles provide
a firm, comfortable grip •Wire looping and bending
holes •Color-coded handles: Red indicates stranded
wire, yellow indicates solid wire
Order# Mfr. #
22-9486 11045
22-9488 11046
Description
Yellow handle for solid wire
Red handle for stranded wire
ONLY
$12.99
12.99
Order #
Mfr. #
22-5340 45-415
22-5345 45-417
22-5350 45-418
22-5355 45-416
Wire Range
10~18AWG solid, 12~20AWG stranded
22~30AWG solid,
24~32AWG stranded
6~14AWG solid,
8~16AWG stranded
14~24AWG solid,
16~26AWG stranded
ONLY
$18.99
18.99
18.99
15.99
•Hardened steel
precision-ground cutting blades for long life
•Curved cutter cleanly cuts round copper cables without
compression or frayed ends •Anvil cutterfor solid and
stranded copper wire up to 12AWG and stainless steel
up to .032" •Mild steel shear cutter for conductors up to
.08" diameter (6-32, 8-32) •Curved cutter for solid and
stranded copper wire up to 8AWG, 1⁄2" multi-conductor
cable, and RG-6 quad, RG-59, and RG-62 coaxial cable
•Double-dipped grips and self-opening spring action
for comfort •Overall length: 7" •Lifetime
manufacturer’s warranty
(1-2)
$26.99
(3-5)
$24.08
(6-up)
$21.14
Wire Stripper
and Cutter
Order #
22-9410
ONLY
$12.99
Order # Description
28-2695 10~18AWG solid
28-2700 16~26AWG stranded
28-2705 8~16AWG stranded
28-2710 22~30AWG solid
Ideal
Model # (1-4) (5-9) (10-up)
T-5
$12.99 $12.25 $11.75
T-6
17.99
16.95
15.19
T-8
12.99
12.25
11.75
T-7
12.99
12.25
11.75
Order #
22-1635
22-1640
22-1645
Description 10~18AWG 16~26AWG 22~30AWG (ea.) $6.69 3.99 6.69 Kinetic Super™ Wire Stripper
(2-4) $6.27 3.83
6.27
(5-up)
$5.55
3.68
5.55
3-in-1
Wire Stripper
with Cutter
•For 10~22AWG copper and
aluminum wire •Three tools in one-wire stripper, cutter,
and pliers •Red cushion grip handle provides maximum
leverage •Length: 61⁄4"
Order #
22-8850
MSRP
$10.99
(ea.)
$8.49
(2-up)
$8.20
Adjustable
Precision Wire
Strippers
•Features an adjustment dial that allows the operator
to select one of six different fine wire gauge settings
•A calibrated wire stop can be adjusted for the desired
insulation strip length •User squeezes and pulls the tool in
a single motion to engage four specially hardened blades
to cleanly cut the wire insulation while the pulling motion
breaks the insulation/conductor bond •Clean, precise strip
of any insulation type •Shirt-pocket size and incredibly
light-weight (<1 oz.) •Adjustable to six wire gauges:
ST-500: 20~30AWG, ST-550: 18~28AWG
Order #
22-9464
22-9466
Mfr. #
ST-500
ST-550
Wire Size
20~30AWG
18~28AWG
ONLY
$32.99
32.99
•Easily cuts and strips stranded or solid wire
with better control •Ergonomic design cradles
your hand and reduces muscle fatigue
•Thumb-Valley™ thumb guide promotes
comfort while focusing kinetic energy for
faster wire stripping •Pocket-Locket™
locks even tighter when tool is slipped
into holster or pants pocket for added
safety •Shear-Cut™ bolt cutters slice
through bolts easier and cleaner
Order #
22-7790
22-7792
22-7796
Description
10~18AWG solid
16~26AWG stranded
8~16AWG solid stranded
(1-4)
$23.99
23.99
23.99
(5-9)
$22.80
22.80
22.80
(10-up)
$21.70
21.70
21.70
Wire Strippers/Crimpers
Heavy-Duty Crimp Tool
•Crimps
insulated/noninsulated and
ignition connectors
•Strips wires 22~10AWG •Cuts bolts 4-40~8-32
•Wire cutters at tip •Length: 9"
Order #
22-1006
(ea.)
$5.04
(2-4)
$4.15
(5-up)
$3.32
Automatic Wire
Stripper
•The automatic wire stripper is
made by precision machines for a long-life
use •For striping wire 24~10AWG •Crimps insulated
and non-insulated terminals 22~10AWG •Overall length:
81⁄4" •Mfr. #8PK-371
Order #
22-10810
ONLY
$9.99
Automatic Wire Stripper
•For all types of wire from
0.2~6mm •Strips lengths up to
25mm •Self adjusting stripping
mechanism •Cable cutter built
into jaws
Order #
22-10020
ONLY
$7.99
Follow us on:
Multi/Crimp Strip Tool
•Cuts wire •Strips 10~22 gauge wire •Crimps insulated
and non-insulated wire •Cuts bolts •Limited quantities
Order #
58-12535
MSRP
$14.95
ONLY
$1.99
MCMelectronics.com
page
375
20
•Strips six
standard wire sizes without
nicking wire •Scissor action of 1⁄2" wide
cutter makes clan cuts with little effort •Serrated nose
jaws to bend, shape or pull wire •Holes for lopping wire
ends •Spring-loaded for self-opening action •Comfortable,
plastic-covered handles •Cuts and strips 10~20 AWG solid
or stranded wire •Length: 61⁄8" •Mfr. #1011
T® Stripper
Preferred by professionals for over
30 years. Originated by Ideal, these
quality strippers feature looping holes,
cushioned plastic grips, and precision,
form-ground, knife type blades that
give an accurate, easy strip every
time. Black oxide finish resists
corrosion; built-in wire cutter on
all models; spring loaded for
automatic operation.
Seven-In-One “T” Type Stripper
Multi-purpose tool is great for
stripping multiple sizes of
wire. Features: Looping
holes, soft cushion
handles, knife type wire
cutting blades, spring loaded handle
and more. Display packaged.
Klein-Kurve™
Multi-Cable
Cutter
Order #
22-9532
The Ideal Reflex™ T®-Stripper with ergonomic
handles is the next evolution in total-comfort,
total-control wire strippers. Designed to fit
an electrician’s natural grip, the complete
line of Reflex™ T®-Stripper wire strippers
provides clean, accurate stripping
while reducing repetitive motion
fatigue. The Reflex™ T®-Strippers
feature: •Ergonomic design fits
natural grip for maximum comfort
•Sure, easy grip •Multi-purpose plier nose
•Convenient looping holes •Easy-to-read laser wire-guage
markings •Tab lock to keep spring in place •Black oxide
finish resists corrosion
Section
20
Tools
Pliers
Plier Set
•A set of three of the
most regularly used pliers
•Bi-material ergonomic
cushion handles •Drop
forged, heat treated steel
•Fully polished heads
Includes: •7" diagonal
pliers •8" combination pliers •8" long nose pliers
Three Piece Tongue and
Groove Pliers Set
•Made from finest quality tool
steel •Designed to grip all
shapes •Precision-milled ribs
for smooth, positive interlock
between two halves •Straight
jaws and self locking jaw
adjustment •Forged, hardened,
and tempered •Red non-slip
cushion handle grip
Order #
96-1980
Order #
22-9904
Tongue and Groove Pliers
Manufactured from the finest quality tool steel, these
pliers are designed to grip all shapes like rods, pipes and
cable connectors. Precision milled ribs assure smooth,
positive interlock with no chance of halves separating
or jumping out of grooves. Forged, hardened and
tempered steel has black phosphate finish and red
cushion handle grips.
Mfr. # Size RT27CV 7" RT210CV 10" (ea.) $9.29 10.99 (2-4) $9.10 9.99 (5-up)
$8.91
9.49
4" Mini Pliers Set
•Mini pliers fit where larger
tools cannot •Pocket sized
•Jaw capacity: 5⁄8" •Drop
forged, heat treated steel
with nickel-plating •Doubledipped handles for great grip Includes: •Slip joint pliers
•Grove joint pliers
Order #
22-10180
ONLY
$5.99
61⁄2" Slip
Joint Pliers
•Designed for gripping and turning round objects
•Curved jaw combined with machined gripping teeth
and wire cutter •Plated forged carbon steel with non-slip
cushioned handles.
Order # 96-1149
Ergonomic
Pliers Set
Long-Nose
Pliers
Cable Cutter
Journeyman™
Hand Tools
Klein’s Journeyman™ line of hand tools sets a new
standard for comfort and durability. The Journeyman line
consists of six side-cutting pliers, four diagonal-cutting
pliers, two long-nose pliers, and one cable cutter. Each tool
features state-of-the-art handles made using a dual material
molding process that allows for a softer, more comfortable
grip on the outer surface and a harder, more durable grip
on the inner surface and handle ends. See and feel the
difference of a Klein Journeyman and you will know why
“professionals are known by the tools they own™”.
Order # Mfr. #
Description
Length ONLY
Side-Cutting Pliers
22-8312 J213-9NE Side-cutting pliers
93⁄8" $37.99
22-8314 J2000-9NE Side-cutting pliers 93⁄8"
42.99
(Heavy-duty)
3
22-8318 J2000-9NECRConnector crimping 9 ⁄8"
54.99
pliers (Heavy-duty cutting)
Diagonal-Cutting Pliers
22-8324 J228-8
Diagonal-cutting pliers 81⁄8"
30.99
22-8326 J2000-28
38.99
(Heavy-duty cutting)
22-8328 J248-8
27.99
(Angled head)
1
22-8330 J2000-48
Diagonal-cutting pliers 8 ⁄8"
42.99
(Angled head-Heavy-duty cutting)
Long-Nose Pliers
22-8332 J203-8
Heavy-duty long-nose 81⁄2"
30.99
pliers (Side-cutting)
1
22-8334 J203-8N
Heavy-duty long nose 8 ⁄2"
36.99
pliers (Side-cutting and stripping)
Cable Cutter
22-8336 J63050
Cable Cutter 93⁄8"
39.99
(High leverage)
ONLY
$6.59
Snap Ring Pliers Set
20
•Convertible for use with both
internal and external snap rings
•Coiled spring for positive jaw
openings •Four interchangeable
tips: 180° (two), 90°, and 45°
Order #
22-10154
#22-595
(1-4 sets)
$13.99
(5-9 sets)
$12.61
(10sets-up)
$11.38
Snap Ring Plier Set
#22-540
•Combination internal and
external snap ring plier
•Effective range from 3⁄8"~ 2"
(10~50mm) •Set comes with
45°, 90°, and 180° convertible tips
•Jaws can be easily changed for six
internal/external positions
#22-555
Cutters
Order #
22-595
22-540
22-555
page
376
ONLY
$13.99
ONLY
$24.99
Side-Cutting Diagonal-Cutting
Pliers
Pliers
Order #
96-930
96-931
MSRP
$19.99
Type Diagonal
Wire cutter
Stripper/cutter
Length (ea.) (2-4) (5-up)
5"
$7.59 $6.99 $6.59
51⁄4"
5.39 5.09 4.59
51⁄4"
4.89 4.49 4.19
Order #
22-6910
(set)
$7.99
1-800-543-4330
Fax: 1-800-765-6960
(2 sets-up)
$7.49
Drop forged
carbon steel,
hardened and
tempered for
outstanding
durability
•Precision
machine jaws
for rigid use
•Ergonomically
designed double-injected handles for a better grip and
reduces user fatigue Set includes: •7" diagonal cutting
pliers •7" combination pliers •8" long nose pliers •8" slip
joint pliers •10" waterpump pliers
Order #
22-9750
MSRP
$39.99
ONLY
$13.99
Locking Pliers
•Adjustable locking pliers manufactured from heat-treated
drop forged steel •Fully polished •Straight serrated jaws
for extra grip
Order #
22-10000
22-10002
22-10004
Length
5"
7"
10"
Capacity
1
⁄2"
3
⁄4"
1"
MSRP
$8.99
9.99
11.99
ONLY
$1.99
2.19
3.29
LIFETIME
WARRANTY
Curved Jaw
Locking Pliers
with Wire Cutter
•The world’s most versatile tool •Use them as pliers,
adjustable wrench, wire cutter, pipe wrench, or clamp
•Locks on to a variety of sizes with a tremendous grip and
quick release •Built to last a lifetime high grade alloy steel
for maximum durability and toughness •Adjusting screw
gives exacting pressure •Guarded release helps keep work
safe and fast •Lifetime warranty
Order #
22-5845
22-5850
Mfr. #
0702L3
0902L3
Size
7"
5"
Jaw Adjustment
Up to 15⁄8"
Up to 11⁄4"
ONLY
$13.99
11.99
LIFETIME
WARRANTY
Three Piece
Locking Pliers Set
•Locks on to a variety of
sizes with a tremendous
grip and quick release
•Built to last a lifetime,
high grade alloy steel for maximum durability and
toughness Set includes: •6" long nose locking pliers
with wire cutter, 5" curved jaw locking pliers with wire
cutter, 10" curved jaw locking pliers •Lifetime warranty
Order #
22-5885
NET 30
Terms
Mfr. #
312GS
ONLY
$34.99
Tools
Pliers
Section
20
NEW!
Cable Cutting Pliers
High Leverage
Diagonal-Cutting Pliers
•High leverage design •Rivet is closer to the cutting edge
for 36% greater cutting power than other plier designs
•Red plastic-dipped handles •Overall length: 81⁄16" •Jaw
length: 13⁄16" •Mfr. #D228-8
Order #
22-9396
ONLY
$29.99
High-Leverage
Cable Cutter
•High-leverage design
for exceptional cutting capability •Precision, one-hand
shearing action •Cable-gripping shear-type jaws •Hotriveted joint ensures smooth action and no handle wobble
•Beveled jaw tips provide proper mating and shearing
action, which protects leading jaw edges •Throughhardened (not case-hardened) for longer-lasting cutting
surfaces •Length: 91⁄2"
Order #
22-9608
ONLY
$32.99
•Designed to cut 4/0 aluminum and up to 2/0 soft copper
•Extra long handles provide maximum cutting leverage
and gripping strength •Designed for minimum cable
distortion •Overall length: 91⁄2"
Order #
22-3520
(ea.)
$7.99
(2-up)
$7.67
Linesman Pliers
•A must for every
handyman •Great
for cutting wire •PVC
dipped handles for a comfortable hold and added leverage
•Precision machined jaws •Polished jaws •Overall length:
10" •Lifetime guarantee
Order #
22-4195
ONLY
$9.99
LIFETIME
WARRANTY
Diagonal
Cutting Pliers
ONLY
$9.19
16" Long Nose Pliers
•Extra long handle allows greater access to confined areas
•Fulcrum point provides more holding power at tip with
less gripping effect •Precision machined jaws •PVC
dipped handles for a comfortable grip •Drop forged, heat
treated steel •Tip of pliers are at 0° •Lifetime guarantee
Order #
22-4295
ONLY
$7.99
An 11" long nose plier
set whose long slim
jaws provide access to
tight and confined
spaces, ideal for
retrieving dropped screws. The rounded jaws help prevent
snagging and scratching; soft gripped handles for user
comfort. The polished heads are supplied in three shapes:
Straight long nose, a 45TC bent nose and a 90TC bent
nose. The pliers are manufactured from drop forged steel
to a professional quality.
(1-4 sets)
$34.99
(5 sets-up)
$32.50
•Narrow jaw and hinge for delicate
work in tight quarters •Sharp pointed-nose
for precise tip cutting •Spring-loaded action for
self-opening •Flush cutting knives •Overall length:
41⁄4" •Jaw length: 1⁄2" •Mfr. #D295-4C
ONLY
$27.99
#96-465
#96-460
#96-470
Anti-Static Hand Tools
•Static dissipative pliers •Cushioned grip for
comfortable fit
Order #
96-460
96-465
96-470
Type (ea.) (2-4) (5-up)
51⁄8" thin bent nose $21.99 $20.79 $19.50
1
4 ⁄2" flush cut diagonal 19.99 19.25 18.70
6" extra thin large 19.99 17.95 16.95
needle nose
•Specialty electronics
pliers •Cutting capacity
up to 12AWG soft wire
•Built-in safety clip
•Spring-loaded •5" long
Order #
96-2065
Order #
22-3685
ONLY
$16.99
Follow us on:
•Forged alloy steel construction
•Exceptional strength
and performance
•Cushion grip provides
maximum leverage •Wire cutter
Description
Midget pliers
All-purpose pliers
Length
4"
6"
ONLY
$20.99
17.99
Clamps and Vises
Order # MSRP
22-9988 $24.99
ONLY
$17.99
Multi-Angle Vise
•Thin long nose pliers •General
purpose use •Serrated jaws •For
pick-up and wire forming •Features
green cushion grips •Length: 5"
Mfr. #
LN54
Diagonal Pliers
•Heat treated jaws, 23⁄8"
wide and 1" deep •Opens
to 3" •Locking swivel base
turns through 360° •Mounting
clamp opens up to 13⁄4" •Paint
coated body •Weight: 5 lbs.
Midget DiagonalCutting Pliers
Versatile tool is invaluable on
any technician’s or hobbyist’s
bench. Padded jaw opens 2"
and swivels a full 360°. In
addition the entire head
assembly can be pivoted 90°
allowing an infinite range of
clamping positions. Padded
table clamp attaches to
surfaces up to 11⁄2" thick.
Order #
22-1735
(ea.) $12.99 (2-4) $12.47 (5-up)
$11.97
MSRP
$3.99
7.99
9.99
13.99
ONLY
$1.99
3.99
4.99
7.99
“C” Clamps
Heavy-Duty
Cutting Pliers
Diagonal Long
Needle Nose Pliers
ONLY
$24.99
20
Order #
TL00710
Order #
22-10795
Table Vise
Order #
22-9394
Three Piece
11" Long
Nose Plier Set
•Heavy-duty, high leverage design provides single handed
cutting action •Smooth spring action for easy, repetitive
cutting •Handle is contoured for comfortable hand grip
•Forged from chrome molybdenum and hardened to 58~60
HRC •Rust resistant electrophoretic deposition finish
•Maintains concentricity to allow fittings and terminals
to go on easily •Mfr. #10512
Order #
96-1320
96-1325
•These heavy duty diagonal pliers feature precision
machined cutting edges and a fully polished head
•Constructed of drop forged, heat treated steel
•Overall length: 10" •Lifetime guarantee
Order #
22-4200
Steel Wire Cutter
•All metal
construction •“C”
clamp with fine thread
•Matte black finish
(ea.)
$6.49
(2-up)
$5.75
Order #
22-9980
22-9982
22-9984
22-9986
MCMelectronics.com
Capacity
2”
4”
6”
8”
page
377
Section
20
Tools
Precision Pliers
Oval
Tapered
NEW!
Tapered
&Relieved
Closed
Electronic
Professional
Side Cutters
NEW!
Six Piece Mini Pliers/Cutter Set
•Ideal for precision electronic work •Lightweight,
ergonomic grip •All pliers are approximately 5" Set
includes: •Micro cutter •Long nose •Bent nose •Flat nose
•Fine tip needle nose •Long nose with side cutter
•Convenient padded zipper case for tool storage
Order #
22-8900
(set)
$21.99
(2 sets-up)
$20.95
Mini Pliers Set
This five piece set comes organized in a zippered carry
case •Soft finish, ergonomic handles for a comfortable
grip Includes: • 5" round nose pliers •4" top cutter pliers
•5" flat nose pliers •41⁄2" diagonal cutting pliers •41⁄2"
combination pliers
Order #
22-9700
MSRP
$29.99
ONLY
$12.99
Slim Line Needle
Nose Pliers
•High-quality ball
bearing steel •63 - 65
Rockwell Hardness (HRC) •2 component ESD ergonomic
handles, soft comfortable gripping surface, hard plastic
core •Dual leaf springs in blue steel •Matched bearing
rings to minimize metal-metal contact and friction •Lap
joint with screw to achieve a high level of strength and
precision •Static dissipative (106 ~ 108Ω/sq.), oil, grease
and wear-resistant •Swiss made •All cutters available with
three types of cutting blades: Semi-flush: For soft and
hard wire Flush: For very precise cutting of soft wire
Full-flush: For a perfect cutting of soft wire
Cutting
Order#
Cut Type
Capacity Length MSRP ONLY
Oval Head
22-10666 Semi-flush 0.2 ~ 1.2 mm 4.8" $59.95 $34.99
22-10668 Flush
0.1 ~ 1.2 mm 4.8" 59.95 35.99
22-10670 Full flush
0.1 ~ 1.0 mm 4.8" 59.95 36.99
22-10672 Semi –flush 0.3 ~ 1.6 mm 4.9" 59.95 35.99
22-10674 Flush
0.2 ~ 1.6 mm 4.9" 59.95 36.99
22-10676 Full flush
0.2 ~ 1.2 mm 4.9" 59.95 37.99
Tapered head
22-10678 Semi-flush 0.2 ~ 1.2 mm 4.8" 59.95 34.99
22-10680 Flush
0.1 ~ 1.2 mm 4.8" 59.95 35.99
22-10682 Full flush
0.1 ~ 1.0 mm 4.8" 59.95 36.99
22-10684 Semi –flush 0.3 ~ 1.6 mm 4.9" 59.95 35.99
22-10686 Flush
0.2 ~ 1.6 mm 4.9" 59.95 36.99
22-10688 Full flush
0.2 ~ 1.2 mm 4.9" 59.95 37.99
Tapered & Relieved Head
22-10690 Semi-flush 0.2 ~ 1.0 mm 4.8" 59.95 36.99
22-10692 Flush
0.1~ 1.0 mm 4.8" 59.95 37.99
22-10694 Full flush
0.1 ~ 0.8 mm 4.8" 59.95 38.99
•For use between tightly
spaced components
•Serrated jaws •Features
green cushion grips
Order #
96-1906
96-1908
Length
5"
51⁄2"
ONLY
$18.99
22.49
Super Series Pliers
•Unique design, heat treated for
added strength •Plated to resist
corrosion •Serrated jaws •51⁄2" length
•Positive gripping of fine wire or subminiature
components •Fine point allows use in confined areas
•Serrated jaws •Green cushion grips for optimized control
and comfort •ESD safe •Length: 4"
Order #
96-1600
Mfr. #
L4V
ONLY
$11.99
Micro Series Pliers
•Thin profile, long reach
•Serrated jaws •51⁄2" length
Order #
22-1060
page
378
•High-quality
ball bearing steel
•63~65 Rockwell
Hardness (HRC)
•Two-component
ESD ergonomic
handles, soft
comfortable
gripping surface,
#22-10696
#22-10706
and hard plastic
core •Dual leaf springs in blue steel •Matched bearing
rings to minimize metal-metal contact and friction •Lap
joint with screw to achieve a high level of strength and
precision •Static dissipative (106~108Ω/sq.) •Oil, grease
and wear-resistant •Swiss made
Order #
Long snipe nose
22-10696
22-10698
Snipe nose
22-10700
22-10702
Flat nose
22-10704
Round nose
22-10706
Jaw
Length
Smooth
Serrated
5.6"
5.6"
$30.99
31.99
Smooth
Serrated
5.2"
5.2"
30.99
31.99
Smooth
5.2"
29.99
Smooth
5.2"
32.99
•Smooth jaws •For
holding and forming wire
and small parts •Features
green cushion grips
•Length: 5"
Order #
96-1898
ONLY
51CGV Long Nose Pliers/Cutter
•Serrated jaws •Forged alloy steel •Red plastic cushion
grips •6" long
Order #
96-245
(ea.) $19.99 (2-4)
$18.95
45° Curved
Long Nose Pliers
•45° curved long nose
pliers •Smooth jaws
•For reaching over assembled components in confined
areas •Features green cushion grips •Length: 51⁄2"
Order #
96-1896
ONLY
$15.99
Flat Nose Pliers
20
Order #
22-1070
Subminiature
Needle Nose
Pliers
Professional
Precision
Pliers
ONLY
$25.49
60° Curved
Long Nose Pliers
•60° curved long nose
pliers •Smooth jaws
•For reaching between closely placed components
•Features green cushion grips •Length: 5"
Order #
96-1894
ONLY
$19.99
ONLY
$16.99
1KV Insulated
Long Nose
Pliers
ONLY
$11.49
Slim LongNose Pliers
•Heavy insulated
grip is rated at
1KV •Excellent cutting capacity and durability •Ideal for
bending tough wire and holding small parts •Sure grip
handles for easy, safe operation •Micro finish plated to
prevent rust •6" long
•Longer nose
and handles for
deeper reach into
work •Spring-loaded for self-opening action •Yellow
plastic-dipped, curved handles provide greater tool
control •Overall length: 55⁄8" •Jaw length: 111⁄16"
•Mfr. #D307-5 1/2C
Order #
22-3760
Order #
22-9390
(ea.)
$4.99
1-800-543-4330
Fax: 1-800-765-6960
(2-up)
$4.79
NET 30
Terms
ONLY
$23.99
Tools
Precision Pliers
Section
20
Micro Series Shearcutter
•Rugged cutter for tough jobs
such as cutting IC pins, cables and
harnesses •51⁄2" length
Micro Cutter
Order #
22-1055
ONLY
$9.99
#22-10066
Order #
22-8905
#22-10060
Shearcutters with
Safety Clips
B
•Superior blade by-pass shear
A
cutting action •Safety clip
prevents flying leads •Better
cuts with half the effort •Greatly reduces mechanical shock
delivered to the work •Available in two different types:
General purpose and heavy-duty for maximum durability
Fig.
A
B
#22-10062
Order # 96-1183 96-1184 Description General purpose Heavy-duty ONLY
$5.99
14.49
•Vinyl dipped stainless steel pliers fit
comfortably in your hand •Machined
for precision work •Long life double
leaf spring for fast and smooth
action •5" length
#22-10068
Description
MSRP (1-5) (6-11) (12-up)
Top cutting $15.99 $3.99 $3.79 $3.49
Long conical 15.99 3.99 3.79
3.49
Angled tip 15.99 3.99 3.79
3.49
(not shown)
Flat with 15.99 3.99 3.79
3.49
smooth jaw
Small cutting 15.99 3.99 3.79
3.49
Oval Head Cutter
Mfr. #
MS54J
ONLY
$16.99
Order # Mfr. #
22-8705 170
22-8710 170SD
22-8720 175
22-8725 175SD
Angled Tip Cutter
•Flush cutting in dense areas •Thin
angled nose for high visibility •Features
green cushion grips •Length: 41⁄2"
Description
Lead cutter
Lead cutter, ESD safe
Lead cutter w/safety clip
Lead cutter w/safety clip,
ESD safe
(1-9)
$5.99
11.99
7.99
13.99
(10-up)
$5.69
11.39
7.59
13.29
ONLY
$35.49
•Comfortable, ergonomic
design •ESD safe to
protect sensitive
components •Responsive
spring-back action for quick, comfortable cutting of
multiple leads •Thin profile design to reach tight areas in
electronics assembly •Shearing action of blades produces
a clean precise cut with less effort •Length: 6"
Diagonal Semi-Flush
Cutter
ONLY
$15.99
ONLY
$16.99
Micro Series Shearcutter
•Very popular general purpose cutter
•Equipped with flat spring •5" length
ONLY
$5.49
Super Series Shearcutter
•Exceptionally tough and durable
•Plated for added corrosion protection
•5" length
Order #
22-1065
ONLY
$5.99
Order #
22-9135
22-9136
Mfr. #
170LX
175LX
Description
Lead cutter
With safety clip (1-9)
$8.99
10.99
(10-up)
$8.54
10.44
•Flush cutting, slim
tapered head •Ergonomic
design reduces fatigue •Overall
length: 4"
Order #
96-1188
ONLY
$15.99
55CGV Diagonal Cutters
•Forged alloy steel •Hand-honed and mated
cutting edges •Red plastic cushion grips •5" long
Order #
96-235
(ea.)
$17.99
(2-4)
$16.95
CHP Shearcutter
Relieved Tapered
Head Cutters
Precision Micro Pliers
•Diagonal cutting pliers
•Relieved tapered head-flush cutter
•Allows use between closely spaced
components •Features green cushion grips
•Length: 4"
Order #
96-2070
Order #
96-1904
20
•Oval head for long life
•General purpose cutting
•Green cushion grips
optimize comfort and control
•ESD safe •Length: 4"
Mfr. #
MS54V
•Flush cutting of leads in
restricted spaces •Narrow
tips give increased
clearance •Features green cushion grips •Length: 4"
Diagonal Cutter
Ergonomic
Lead Cutters
Order #
96-1595
(2-up)
$5.19
Platoshear Lead Cutters
•Effortless shearing action, requires 50% less operator
effort •Thin profile designed for those hard-to-reach areas
in electronic assembly •Comfortable,lightweight,
cushioned handles •Made in the U.S.A.
Order #
96-1902
(ea.)
$5.99
Order #
22-1050
•Oval head diagonal cutter •Flush
cutting •General use •Features green
cushion grips •Length: 4"
Order #
96-2075
MSRP
$9.99
Tapered Head
Diagonal Cutter
Precision Pliers
Order #
22-10060
22-10062
22-10064
22-10066
22-10068
•General purpose cutter •Ideal
for precision electronic work
•Suitable for copper wire
•Lightweight and easy to handle •Length: 5"
Mfr. #
MS543J
•Stainless steel •Lightweight
for operator comfort •Perfect
for precision work
ONLY
$16.99
Follow us on:
Order #
22-3745
22-3750
Type Cutting pliers
Long nose pliers
#22-3745
Length
31⁄2"
4"
(ea.)
$4.99
3.99
#22-3750
(2-up)
$4.09
3.83
•Small tapered head
makes this an excellent
general-purpose cutter
•Made from 2.5mm
steel •Ergonomic
handle for increased
comfort •Length: 51⁄2"
Order #
94-780
MCMelectronics.com
ONLY
$4.99
page
379
Section
20
Tools
Screwdrivers
XL-75 Offset
Ratchet
Screwdriver Kit
•Five piece set in see-through plastic pouch Kit contains:
•Phillips #1, Phillips #2, 3⁄16" slotted and 1⁄4" slotted
screwdriver and ratchet handle
Order #
96-255
(kit) $22.99 (2-4 kits)
$21.26
99-SM Roll-Up Tool Kit
•Versatile 23 piece kit in a durable, roll-up plastic coated
canvas case Kit contains: •Regular and stubby handles,
nine regular and three stubby nut drivers, two slotted and
two Phillips screwdrivers, a reamer, an extension, a long
nose plier, 5" diagonal cutter and a 6" adjustable wrench
in roll-up pouch
•Roll-up kit containing a 99-1V series handle, nine nut
driver blades, and four screwdriver blades •Comes in a
convenient roll-up case
Order #
96-225
96-1060
Order #
96-260
96-230
Description
99-SM kit
Canvas case
ONLY
$149.00
18.99
99-PR Nut and Screwdriver Kit
Description
99-PR kit
Deluxe canvas case
#96-130
Flexible/Ratchet Driver Set
Order #
22-3830
(set)
$8.59
Pocket Roll Kit
#96-280
•Mini-ratchet handle has forward, reverse, and
conventional settings •Flexible extension shaft is 7.5"
and gets into hard to reach areas •Also includes ten piece
bit set, three slotted; Phillips #1, #2; pozi #1, #2; 10, 15,
20mm torx bits
(2 sets-up)
$8.23
(ea.) (2-4)
$5.00 $4.90
6.49 6.10
12 Piece/3
Way Angled
Screwdriver
This angled
screwdriver
allows the user
to access and
fasten/unfasten screws positioned at awkward angles
simply by twisting the handle. The angled head is
removable and can be fitted into power tools, such as
drills and screwdrivers. Once the angled attachment is
removed, the bit adaptor can be fitted and used as a
standard screwdriver. The set also comes with ten
screwdriver bits: Two Phillips (#1, #2); Pozi (#1, #2,
#3); Slotted (4mm, 7mm); Torx (T10, T15, T20).
Order #
22-8272
(ea.)
$15.33
(2-up)
$14.56
•Reversible blades snap in and
out easily and hold firmly in
perfect alignment by patented
spring hook Kit includes: •No.
25 screwdriver handle •#1
Phillips 3⁄16" slotted reversible
blade •#2 Phillips 1⁄4" slotted
reversible blade •#3 Phillips
5
⁄16" slotted reversible blade
•Pocket pouch
Handles
Order #Mfr. # Type Size 96-13099-1V Regular 41⁄8" (L) x 13⁄16" (dia) 96-28099-4V Tee 31⁄2" x 15⁄8" ONLY
$69.99
13.99
Order #
96-1892
ONLY
$24.99
Phillips Type Blades
Order # Mfr. # Size 96-205 99-821V No. 1 96-210 99-822V No. 2 Length 4" 4" (ea.) $3.99 4.79 (2-4)
$3.79
4.69
Length 4" 4" Length 35⁄8" (ea.) $5.99 (2-4)
$5.69
99-X 10V Extension
Flat Blades for
99 Series Handles
Order # Mfr. # Size 96-185 99-811V 3⁄16" 96-190 99-250V 1⁄4" Magnetic Nut Driver Shanks
Order # Mfr. # Size 96-170 99-8MV 1⁄4" (ea.) $4.79 4.79 (2-4)
$4.69
4.69
•7" long •Adds length to all of the above blades
and shanks
Order #
96-220
(ea.) $7.29 (2-4)
$6.98
LIFETIME
WARRANTY
20
Tool Magnetizer
and Demagnetizer
Magnetize or demagnetize
steel screwdriver blades,
tweezers and similar tools.
Box is made of high quality,
shock resistant, green plastic.
Cadmium free.
Order #
22-2842
ONLY
$5.73
Phillips Extended Blade Screwdrivers
These screwdrivers are essential when servicing
anything that is in a hard–to–reach place. The extended
shaft length is ideal when removing screws that are
deeply recessed. Screwdrivers feature large–grip
handles and hardened tips.
30 Piece Security Screwdriver Bit Kit
Order # Size Type Shaft Length (ea.) (2-4) (5-up)
22-5715 #1 Phillips
8"
$2.59 $2.26 $1.84
22-5720 #2 Phillips
10"
2.99 2.87 2.76
•Twin wrench driver
has tips at both ends
for horizontal and
vertical use Set
includes: •Seven torx tamperproof bits (T-8H, T-10H,
T-15H, T-20H, T-25H, T-27H, T-30H); 6mm torx bit;
double sided Phillips #1/slotted bit; Phillips #2/slotted
bit •Non-slip grip on driver
This complete set of security bits takes the frustration
out of servicing items with security screws. This includes
IBM PS/2 monitors, CATV and telephone equipment,
and many other items. Total cost of all included items if
purchased separately is over $40. Call for larger quantity
prices. Kit includes: 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32" security hex
bits: T-8, T-10, T-15, T-20, T-25, T-27, T-30 security torx
bits; #4, #6, #8, #10 spanner bits; #1, #2, #3, #4 tri-wings,
3mm, 4mm slotted screwdriver tips; #1, #0 Phillips type
screwdriver tips; 1⁄4" socket adapter; spring bit holder;
71⁄2" magnetic handle and a plastic carry case with
transparent lid.
•No-slip grip handle
stops slippage for higher
torque •Rear taper tri-oval design allows handle to lock
around hand increasing downward force Includes:
•Dura-Driver, #1 Phillips x 3⁄16" slotted bit, #2 Phillips x
9
⁄32" slotted bit, 1⁄4", 5⁄16", 7⁄16" nut drivers. •Mfr. #SDMB7V
Order #
22-3825
Order #
22-1476
Order #
96-1435
Security
Twin Wrench
Driver Set
page
380
(set)
$3.99
(2 sets-up)
$3.83
(kit)
$15.99
1-800-543-4330
Fax: 1-800-765-6960
(2 kits-up)
$14.69
Dura-Driver 7-in-1
Screwdriver
NET 30
Terms
ONLY
$5.99
Tools
Precision Screwdrivers
ProTurn
Precision
Screwdriver Set
Six Piece ESD
Safe Precision
Screwdriver Sets
•Precision screwdriver sets
are designed to maximize
efficiency and production
•ESD safe for protection to
ESD sensitive components •Fast
turning swivel caps with cavity
provide optimum control for
precise centering •Black oxide tips for longer wear life
•No-roll handle design keeps drivers from rolling off
uneven surfaces •Storage case provides a home and keeps
drivers safe •Six piece slotted/Phillips set includes four
slotted screwdrivers (1.5mm x 60mm, 2.0mm x 60mm,
2.5mm x 60mm, 3.0mm x 60mm) and two Phillips
screwdrivers (#0, #00) •Six piece Torx set includes
two standard torx tip screwdrivers (T5, T6) and four
tamper-proof torx tip screwdrivers (T7, T8, T10, T15)
Order # Description
96-1360 6 Piece Slotted/Phillips Set
96-1365 6 Piece Torx Set
(set) (2 sets-up)
$24.99 $22.49
29.99
26.95
•Molded on ergonomic handles •Exact fit precision tips
•Finger tip control cap •Black finish blades •Hardened
CVM tool steel blades •Ideal for electronics, hobby,
and precision repair
Order # Sizes
95190 Slotted: 1.5, 2.5, 3.5mm; Phillips: #00, #0, #1
•Hardened tool steel
blades •Exact fit
precision machined tips
•Interchangeable compact
blades •Perfect for fastening jobs
Includes: •Slotted: 1.5, 2, 3, 4mm •Phillips: #000,
#00, #0, #1 •Torx: T6, 7, 8, 9, 10, 15, 20 •Workstation
indexed box
Order #
62993
•Precision tapered
handles •Exact fit hardened tool steel tips
•Six piece slotted set includes: 1.5, 2.0,
2.5, 3.0, 3.5, 4.0mm •Seven piece slotted
and Phillips set includes: 1.5, 2.0, 2.5, 3.0mm
slotted and #00, #0, #1 Phillips
ONLY
$38.99
LIFETIME
WARRANTY
Order #
22-2795
22-2796
A
B
System 4 Adjustable Handles
Fig. Order # Description (1-4) A
26901 Adjustable handle $6.86 B
28001 ESD adjustable handle 5.99 Order # Size 22-2911T3 22-2912T4 22-2913T5 27 piece combination
set includes: •ESD
handle •120mm
extension •Four
slotted: 1.5, 2.0, 3.0,
and 4.0 •Four Phillips:
#000, #00, #0 and #1
•Nine torx: T3, T4, T5,
T6, T7, T8, T9, T10
and T15 •Eight hex:
.050", 1⁄16", 5⁄64", 3⁄32", 7⁄64",
1
⁄8", 9⁄64", and 5⁄32" 25
piece security set
includes: •ESD handle
•120mm extension
•Four tamperproof
metric hex: 2.0, 2.5,
3.0, and 4.0mm •Six tamperproof inch hex: 2.0, 2.5, 3.0,
and 4.0mm •Three standard hex: 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", and
5
⁄32" •Six tamperproof torx: TR7, TR8, TR9, TR10, TR15,
and TR20 •Four standard torx: T3, T4, T5, T6
(5-up)
$6.08
5.69
ONLY
$29.99
61.49
44.99
64.99
57.49
ONLY
$6.45
6.45
6.45
Order # Size ONLY
22-2914T6 + T8 $6.45
22-2915T7 + T9 6.45
22-2916T10 + T15 6.45
Order # Description
75992 27 piece combination
75998 25 piece security
Interchangeable Phillips
Reversible Blades
Order #
22-2874
22-2875
Order #
22-2805
22-2806
22-2807
22-2808
22-2809
22-2810
(5 sets-up)
$45.51
57.94
LIFETIME
WARRANTY
Description #000 + #00 #0 + #1 Precision Single
Slotted Screwdrivers
(1-4 sets)
$51.49
65.49
ONLY
$8.16
7.20
Precision ESD
Safe Slotted/
Phillips
Screwdriver Set
LIFETIME
WARRANTY
Description 1.5 x 40mm 2.0 x 40mm 2.5 x 50mm 3.0 x 50mm 3.5 x 60mm 4.0 x 60mm ONLY
$3.29
3.29
3.09
3.50
3.83
4.33
•Set includes: Four
slotted (1.5 x 40mm, 2.0 x 50mm, 2.5 x 50mm, 3.5 x
60mm) and three Phillips (#00 x 40mm, #0 x 50mm,
#1 x 60mm) •Precison control with finger tip rotation cup
•ESD safe comfortable tapered handle for rapid rotation
•Hardened and plated CVM tool steel •Precision machined
tips for exact fit
Order #
27390
ONLY
$29.99
LIFETIME
WARRANTY
Precision Single
Phillips Screwdrivers
Follow us on:
Order #
22-2811
22-2812
22-2813
22-2814
MCMelectronics.com
Description #000 x 40mm #00 x 40mm #0 x 50mm #1 x 60mm ONLY
$5.55
4.27
3.83
4.16
page
381
20
Description
5 piece slot/phil
9 piece slot/phil/torx
8 piece precision torx
9 piece metric nut driver
9 piece inch nut driver
ONLY
$23.99
25.49
System 4
Micro Bit
Sets
Interchangeable
Reversible Torx Blades
•Wiha exclusive CVM tool steel for durability •Collet
lock design keeps blades in place •Adjustable lengths
from .6" to 3.75" •Exact fit vapor chromed tips •Five
piece torx set includes: T6+T8, T7+T9, T10+T15,
T15+T20 •Five piece slotted/Phillips set includes:
Phillips: #000+00, #0+1 slotted: 1.5+3.0, 2.0+3.5mm
•Nine piece slotted/Phillips/torx set includes: Phillips:
#000+00, #0+1 slotted: 1.5+3.0, 2.0+3.5, 2.5+4.0mm
Torx: T6+T8, T7+T9, T10+T15 •Eight piece precision
torx set includes: T3, T4, T5, T6+T8, T7+T9, T10+T15,
T15+T20 •Nine piece metric nut driver set includes:
2.0+2.5, 3.0, 3.2, 3.5, 4.0, 4.5, 5.0, 5.5mm •Nine
piece inch nut driver set includes: 3⁄32", 7⁄64", 1⁄8", 9⁄64",
5
⁄32", 3⁄16", 7⁄32", 1⁄4"
Description
6 piece slotted
7 piece slotted/Phillips
LIFETIME
WARRANTY
LIFETIME
WARRANTY
Order #
22-2866
22-2867
22-2868
22-2869
22-2870
Precision Slotted
and Phillips
Screwdriver Sets
ONLY
$23.99
System 4
Interchangeable
Anti-Static
Precision Sets
20
LIFETIME
WARRANTY
•Allows adjustable blade length (15~95mm)
•Collet lock allows for quick and easy
adjustment while holding the blade secure
•Rotating cap •ESD handle allows user to work on static
sensitive equipment without damaging it
ProTurn Precision
Six Piece
Screwdriver Set
Section
Section
20
Tools
Screwdrivers
UNLIMITED
WARRANTY
Five Piece
MicroFinish
Heavy Duty and
Mechanics
Screwdriver
Sets
Heavy duty set offers: •Non-slip grip •Hex blade
extending through handle with striking plate •Hex bolster
for use with wrench Mechanics set offers: •Non-slip grip
•Round blades Both sets include: •Slotted: 7⁄32", 1⁄4", 5⁄16"
•Phillips: #1, #2 in a hanging tool rack
UNLIMITED
WARRANTY
SoftFinish Ergonomic Screwdrivers
20
SoftFinish set offers: •Five piece SoftFinish cushion grip
screwdrivers •Slotted: 6.5 x 150mm, 4.0 x 100mm, and 3.0
x 100mm •Phillips: #1 x 80mm and #2 x 100mm •Blades
made of Wiha exclusive chrome moly CVM steel for
incredible durability •Ergonomic grip reduces hand fatigue
Order # Description
(1-4 sets)
30295
5 piece SoftFinish set $31.49
Single SoftFinish mechanics screwdrivers
Slotted
30215
4.0 x 100mm
4.99
30217
4.0 x 150mm
5.46
30220
5.5 x 125mm
5.99
30225
6.5 x 150mm
7.74
30235
10.0 x 200mm
11.99
Phillips
31105
PH#0 x 60mm
4.12
31110
PH#1 x 80mm
4.99
31112
PH#1 x 200mm
7.99
31115
PH#2 x 100mm
6.99
31117
PH#2 x 200mm
8.06
31120
PH#3 x 150mm
10.49
(5 sets-up)
$27.87
Order # Description
SoftFinish heavy-duty Phillips screwdrivers)
31201
PH #1 x 80mm
31202
PH #2 x 100mm
31203
PH #3 x 150mm
SoftFinish heavy-duty slotted screwdrivers
30815
5.5 x 100mm (7⁄32")
30817
6.5 x 125mm (1⁄4")
30820
7.0 x 125mm (9⁄32")
30830
10.0 x 175mm (3⁄8")
SoftFinish heavy-duty Pozidriv® screwdrivers
31305
PZ #0 x 60mm
31310
PZ #1 x 80mm
31312
PZ #1 x 200mm
31315
PZ #2 x 100mm
31320
PZ #3 x 150mm
SoftFinish Torx® screwdrivers
36264
T5 x 60mm
36266
T6 x 60mm
36268
T7 x 60mm
36270
T8 x 60mm
36272
T9 x 60mm
36274
T10 x 80mm
36276
T15 x 80mm
36278
T20 x 100mm
36280
T25 x 100mm
36284
T30 x 115mm
36286
T40 x 130mm
36288
T45 x 130mm
ONLY
Order # Description
Single SoftFinish nut drivers
1
34759
⁄4" (SAE)
4.79
4.84
5.32
6.86
10.29
3.65
4.79
7.08
6.71
7.15
9.29
Order #
22-2918
22-2919
Description 5 piece heavy duty
5 piece mechanics
ONLY
$67.99
43.99
Order #
Description ONLY
Single MicroFinish Slotted Mechanics Screwdrivers
22-2920
4.0 x 100mm (5⁄32") $6.49
22-2921
4.0 x 150mm (5⁄32") 7.37
22-2928
10 x 200mm (3⁄8") 14.49
Single MicroFinish Mechanics Phillips Screwdrivers
22-2929
PH#1 x 80mm 7.16
22-2930
PH#1 x 200mm 6.99
22-2931
PH#2 x 100mm 9.48
22-2932
PH#2 x 200mm 10.99
®
MicroFinish Torx Screwdrivers
52711
T9 x 60mm
6.24
52716
T15 x 80mm
6.99
52719
T20 x 100mm
7.26
52722
T25 x 100mm
8.29
52729
T30 x 115mm
11.49
Single MicroFinish Heavy Duty Slotted Screwdrivers
22-2934
4.5 x 90mm 10.49
22-2935
5.5 x 100mm 12.49
22-2936
6.5 x 125mm 13.99
22-2937
8.0 x 150mm 18.99
Single MicroFinish Heavy Duty Phillips Screwdrivers
22-2939
PH#1 x 80mm 10.99
22-2940
PH#2 x 100mm 12.99
$7.60
10.49
11.99
9.80
10.99
10.99
16.99
5.34
5.49
8.29
8.29
12.49
5.82
3.99
4.44
4.44
4.79
4.99
5.23
5.48
6.26
8.64
9.11
9.56
(1-4)
(5-up)
$9.00 $7.98
42 Piece Screwdriver Kit
•A wide variety of
screwdriver types and sizes
in one case Kit includes:
•6" flexible shaft •High
torque screwdriver bit holder
•Two insulated Cr-V 3"
screwdrivers: Slotted 5mm
and Phillips #1 •Six Cr-V
screwdrivers: Slotted 6 x
100mm, 8 x 150mm, 6 x
38mm, Phillips: #2 x 100mm, #3
x 150mm, #2 x 38mm •Seven Cr-v precision screwdrivers
•1" Cr-v screwdriver bits with holder: Slotted (3, 4, 5, 6,
and 7mm), Phillips (#0, #1, #2, and #3), torx (T10, T15,
T20, T25, T30 and T40), and hex 2, 3, 4, 5, 5.5, and 6mm
Order #
22-10030
MSRP
$24.99
ONLY
$8.49
Six Piece CushionGrip Screwdriver Set
•General purpose selection
of the most frequently
used screwdrivers Set
Includes: •One cabinet tip
•Three Phillips-tip styles
(#1, #2, #3) •Two
keystone-tip •Mfr. #85074
Order #
22-9400
ONLY
$64.99
Pro-Series Screwdriver Sets
All Pro-Series screwdrivers feature rubber coated
dual material handles with an ESD safe hard plastic
core to protect sensitive components. The handles are
ergonomically designed, allowing sustained high torque
with minimal slippage and muscle fatigue. And all ProSeries screwdrivers have professional level features like
chrome vanadium steel shafts with black oxide tips. If
you are discriminating about the tools you use, the
Xcelite Pro-Series is designed for you.
Order # Mfr. # Description
ONLY
96-1650XPE500Five piece set (1⁄8", 3⁄16", 1⁄4" $24.99
slotted; #1, #2 Phillips)
96-1655XPE700Seven piece set (1⁄8", 5⁄32", 34.99
3
⁄16", 1⁄4", 5⁄16" slotted; #1, #2 Phillips)
10" Blade Philips Screwdrivers
Ideal for reaching deeply recessed screws found on
electronic equipment with molded plastic cases.
Invaluable when servicing many televisions, boom
boxes and stereo equipment.
Order #
96-1057
96-1058
Mfr. #
XST-1020
XST-1010
Tip Size
#2
#1
ONLY
$9.69
8.59
Eight Piece Comfort Grip Screwdriver Set
•Chrome vanadium steel shafts with black oxide tips
•Rubberized grip for comfort •Hole in handle for hanging
•Includes: Four slotted screwdrivers (4.0, 5.5, 6.5mm,
6.5mm stubby); four Phillips screwdrivers (Phillips #0,
#1, #2, #2 stubby) •Includes carry case with see
through lid
Order #
22-8880
page
382
1-800-543-4330
Fax: 1-800-765-6960
MSRP
$38.50
NET 30
Terms
(set)
$15.99
(2 sets-up)
$15.29
Tools
Screwdrivers
•Cushion-grip handle allows for greater torque and
comfort •Premium chrome plated for smooth feel and
corrosion resistance •Internal flanges inside handle
provide solid, twist-resistant blade anchor •Special heattreated shafts •Precision-machined tip for exact fit •Meets
or exceeds applicable ASME/ANSI specifications •End of
handle is marked to quickly identify tool •Features 5⁄16" and
1
⁄4" nut drivers, #1 and #2 Phillips, 1⁄4" and 3⁄16" slotted, #10
and #15 Torx, and #1 and #2 square-recess.
Order #
22-9490
ONLY
$15.99
•Exact fit machined precision
ground tips •Dual material
handle has molded in soft grip
panels •Blades made of
chrome-vanadium-molybdenum
tool steel, hardened, nickel-plated or black
finish •Hole in handle for hanging
Order # Description
46097
Eight piece set includes: 3.0, 4.5, 6.0, 8.0mm slotted; #1, #2, #2s, #3 Phillips
46098-01 Four piece set includes: 4.5, 6.0mm slotted; #1, #2 Phillips
NEW!
Insulated
Screwdriver and
Nut Driver Sets
ONLY
$42.49
19.99
LIFETIME
WARRANTY
Six-In-One Insulated
Magnetic 1⁄4" Screwdriver
Screwdriver with 32 Piece Tamperproof Bit Set
•Cushion-grip handle for greater torque and comfort
•Sturdy bit and screw holding magnet allows for screws to
fit securely in place for easy use Bit set includes: •Torx®:
T7, T8, T10, T15, T20, T25, T30 and T40 •SAE hex: 3⁄32",
7
⁄64", 1⁄8", 9⁄64", 5⁄32" and 3⁄16" •Metric hex: 2mm, 2.5mm, 3mm,
4mm and 5mm •Spanner: 4, 6, 8 and 10 •Tri-Wing®: 1, 2,
3 and 4 •Torq-Set®: 6, 8 and 10 •1⁄4", square to 1⁄4" hex
adapter to drive sockets •Mfr. #32510
Order #
22-10510
ONLY
$24.99
•Insulated to 1000VAC
•Magazine style bit storage
saves time by selecting the
right bit accurately every
time •Ergonomic “Power
Handle” grip for maximum
torque and user comfort
•Shaft is hardened and
tempered Chrome
Vanadium Molybdenum
tool steel, with molded on
insulation •Stainless steel
bit holder directs magnetism
into the bit for screw holding
•Drivers includes: Slotted:
4.5, 6.0, 8.0mm; Phillips:
#1, #2, #3 bits
Order #
22-2997
Ratcheting Screwdriver
•Rugged ergonomic grip •Three settings: Forward,
reverse, and conventional •Quick and easy action selector
•Nickel plated chrome vanadium steel bits Includes: Two
double ended screwdriver bits (#2 Phillips 1⁄4" slotted, #1
Phillips 3⁄16" slotted) and one double ended nutdriver bit
(5⁄16", 1⁄4")
Order #
22-8584
MSRP
$9.99
ONLY
$5.99
This offset ratchet
screw and socket
driver has a hexagon
drive to accommodate
1
⁄4" screwdriver bits and a square drive male head for
driving 1⁄4" square drive sockets. Ideal for reaching small,
confined areas. Kit includes: Ratchet driver; six SAE
sockets (3⁄16", 7⁄32", 1⁄4", 5⁄16", 11⁄32", 3⁄8"); ten screwdriver bits
(T10, T15, T20 torx bits; Phillips #1, #2 bits; Pozi #1,
#2 bits; slotted 4, 5, 6mm bits).
(set)
$6.99
•Six piece insulated
slotted/Phillips set
includes: slotted: 3.5, 4.5, 6.5mm Phillips: #1, #2, #3
•Five piece insulated inch nut driver set includes: 7⁄32",
1
⁄4", 5⁄16", 3⁄8", 1⁄2"
Order #
Description
ONLY
22-2942
6 piece insulated slot/phil
$42.49
Single Insulated Slotted Screwdrivers
22-2946
2.5 x 75mm (3⁄32") 4.99
22-2947
3.0 x 100mm (1⁄8") 4.99
9
22-2948
3.5 x 100mm ( ⁄64") 5.30
3
22-2949
4.5 x 125mm ( ⁄16") 6.36
7
22-2950
5.5 x 175mm ( ⁄32") 7.18
3
22-2953
10 x 200mm ( ⁄8") 14.99
Single Insulated Phillips Screwdrivers
22-2955
PH#1 x 80mm 6.17
Single Insulated Torx Drivers
22-2983
T6 x 60mm 5.53
22-2984
T7 x 60mm 5.53
22-2985
T8 x 60mm 5.53
22-2987
T10 x 60mm 5.53
Single Insulated Metric Nut Drivers (125mm in length)
22-2959
4mm 8.92
22-2960
5mm 9.19
22-2963
7mm 10.49
Single Insulated Inch Nut Drivers (125mm in length)
5
22-2974
⁄32" 8.96
3
22-2975
⁄16" 9.19
1
22-2977
⁄4" 9.19
Insulated
Screwdriver
Set
•Seven-piece
VDE screwdriver
set •Ergonomic, soft grip
handles for added comfort and greater turning power
Includes: •Phillips drivers: PH0 x 60mm, PH1 x 80mm,
PH2 x 100mm; •Slotted drivers: 3 x 75mm, 4 x 100mm,
5.5 x 125mm, 6.5 x 150mm •All purpose voltage tester
Order #
22-9902
MSRP
$34.99
ONLY
$8.99
(2 sets-up)
$6.71
20
8-in-1 Lighted
Ratcheting Magnetic
Screwdriver with
Telescoping Retriever
ONLY
$18.99
17 Piece
Offset Ratchet
Screwdriver and
Socket Set
Order #
22-3990
20
LIFETIME
WARRANTY
3K Ergonomic
Screwdriver Sets
Ten-in-One Screwdriver/Nut Driver
Section
8-in-1 Screwdriver with Pick-Up Tool
58 Piece Screwdriver Set
•Dual lights in handle, shaft mounted bit holder •Threeway ratcheting action: Forward, lock, and reverse •Six
screwdriver bits: #1 and #2 Phillips, 3⁄16" and 1⁄4" slotted,
T15 torx, and R2 Robertson •Magnetic retriever extends to
247⁄8" •Uses two “AAA” batteries (not included) •Patented
•Magnetic tip holds bits in place and extends up to 211⁄2"
overall length •Ergonomic molded grip with soft finish for
outstanding grip for torque •Includes 7 bits: 4mm and
6mm slotted; #1, #2 and #3 phillips; #1 and #2 pozi
•Removable bit holder on shaft
•Soft finish, easy-grip ratcheting driver •8" flexible
extension shaft •Seven hex bits (2~6mm) •Seven torx bits
(T10~T40) •14 pozidrive bits (#0~#3) •Seven philips bits
(#0~#3) •Seven slotted bits (3mm~7mm) •Hex nut drivers
(SAE 3⁄16"~7⁄16", metric 5mm~11mm)
Order #
22-9142
Order #
22-9744
Order #
22-10028
ONLY
$9.99
Follow us on:
MSRP
$9.99
ONLY
$3.99
MCMelectronics.com
MSRP
$29.99
ONLY
$19.99
page
383
Section
20
Tools
Precision Screwdrivers
NEW!
12-in-1
Electronics
Screwdriver
Set
•12 microsized bits
with metal
driver handle
•Extremely portable, soft,
leather-like case with snap
closure fits perfectly in pocket (21⁄2"
3
x 3 ⁄4") Bits included: •Torx: T5, T6, T7,
T8, T9, and T10 •Slotted: 1.5, 2.0, and 2.5mm •Phillips:
#000, #00, and #0
Order #
22-10415
ONLY
$6.99
NEW!
Order #
22-10410
MSRP
$26.99
ONLY
$12.99
Seven Piece Precision
Screwdriver Set
20
Precision screwdriver set
features hardened tips,
precision molded handles
and swivel caps. Very high
precision tips are ideal for
delicate work. Sizes include
#00 and #0 Phillips, 2mm,
2.4mm, 3mm slotted and
T15 and T20 torx type
tips. Shaft length 50mm.
Includes carry case with
see through lid.
MSRP
$20.99
(ea.)
$15.99
20 Piece Micro
Screwdriver Set
Price per set
(2-9) (10-49) (50-up)
$15.49 $11.69 $10.69
A
Seven Piece Precision
Torx Screwdriver Set
A handy set that includes
bits used in cell phone,
game system, and other
electronic repair. •Soft
finish, ergonomic handle
with swivel base is well
balanced and accepts the
included 5⁄32" (4mm) bits
•Pocket sized case keeps
everything organized
•Tweezers for pick up small
parts •Includes Torx bits (T5, T6, T7, T8, T9, T10, T15,
and T20), Phillips bits (#000, #00, #0, and #1), flat bits
(3⁄64", 1⁄6", 5⁄64", 3⁄32", 1⁄8", and 5⁄32"), and Pozi bits (#0 and #1)
Order #
22-9838
Seven piece set includes:
T5, T6, T7, T8, T9, T10,
T15 precision torx
screwdrivers.
Order #
26792
ProTurn Torx
Screwdriver Sets
•Black finish blades
with molded on
ergonomic handle
•CVM special
tool steel
Insulated
Precision
Driver Set
•Six-piece set offers
insulative properties
rarely found on
precision sized
tools •Provides
shock protection
to 1000VAC •Meet
VDE standards
Set includes:
•Slotted drivers (1.5mm, 2.0mm, and 2.5mm)
•Phillips (#00, #0, and #1) •Plastic storage case
Order #
22-10198
Order # Description
45591 6 piece set
45592 8 piece set
ONLY
$11.99
25-in-1
Electronics
Micro Tool Set
NEW!
•25 micro-sized
bits with metal
driver handle
and 4" extension
•Quick change
spring-loaded
chuck Bits
included: •Torx:
T5, T6, T7, T8,
T9, T10, and T15
•Slotted: 2, 3, and
4mm •Phillips: #00, #0, #1, and #2 •Open-ended wrench:
4.0, 4.5, 5.0, 5.5, and 6.0mm •Nut drivers: 2.5, 3.0, 3.5,
4.0, 4.5, and 5.0mm
Order #
22-10420
ONLY
$14.99
Sizes
Torx: T7, T8, T9, T10, T15, T20
Torx: T8, T9, T10, T15, T20, T25, T27, T30
Order #
74586
74587
74588
74589
74591
Description
T10 x 152mm
T15 x 152mm
T20 x 152mm
T25 x 152mm
T30 x 152mm
Fig.
A
B
Order #
22-885
22-895
page
384
Blade
Flat with magnet
Flat with Phillips top
(1-9)
$2.59
2.09
(10-24)
$2.29
1.69
Mfr. # R3323V
R183V
P-12-SV
R181
Blade (overall length)
⁄32" flat
51⁄4"
1
⁄8" flat
51⁄4"
1
⁄8" Phillips
41⁄4"
1
⁄8" flat
41⁄4"
3
1-800-543-4330
Fax: 1-800-765-6960
(ea.)
$2.59
2.99
3.39
1.99
ONLY
$7.16
7.16
7.16
7.16
7.16
Series 1500 Screwdriver
for Torx® Screws
Screwdriver features round shaft, oversized handles
for increased torque and a vapor blasted tip to eliminate
chipping. Graphic in handle end identifies tip type.
•Available in Torx size T-6 •Shaft length 3" •Overall
length 65⁄8" •Mfr. #CDT-6V
Order #
96-980
(ea.)
$4.99 •Pocket screwdrivers with clip attached
•Chrome vanadium steel blades; plated for protection
•Available in flat blade and Phillips blade types
Order #
96-285
96-290
96-295
96-1070
29.49
•Length: 6.0"/152mm
Pocket Screwdrivers
•Great general purpose screwdriver, perfect for
adjustments, alignments and many other miscellaneous
applications •Pocket sized with clip attached
ONLY
$19.99
Power Torx® Bit 1⁄4" Hex Drive
B
Pocket Screwdrivers
ONLY
$29.99
LIFETIME
WARRANTY
ONLY
$9.99
30 Bit
Precision
Screwdriver
Set
•30 micro-sized
bits with driver
handle and
adjustable length
shaft •Shaft
adjusts from 15⁄8"
up to 41⁄2" total
shaft length •5⁄32"
hex bits Bits
included: •Torx:
T4, T5, T6, T7,
T8, T9, T10, T15,
T20 •Slotted: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, and 4.0mm
•Phillips: #000, #00, #0, #1 •Hex: 2.0, 2.5, 3.0, and 4.0mm
•Nut: 2.5, 3.0, 3.5, 4.0, 4.5, and 5.0 mm
Order #
21-3600
Torx Drivers
(2-4)
$2.29
2.79
3.28
-
NET 30
Terms
(2-4)
$4.82 (5-up)
$4.67
Tools
Nut Drivers
Seven Piece Nut
Driver Set
•Ten color coded nut drivers and a
torque amplifier handle in a convenient seethrough plastic case •Sizes: 3⁄32"~3⁄8"
Order #
96-265
Description
ONLY
Metric includes: 5mm, 5.5mm, 6mm, $45.49
7mm, 8mm, 9mm, 10mm
SAE Includes: 3⁄16", 1⁄4", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2" 46.99
(set)
$34.99
(2-4 sets)
$32.95
Hollow Shaft Nut Driver Set
Seven piece set includes metal stand for bench top or wall
hanging. 3" hollow shafts are ideal for tightening nuts on
studs with long length includes the following sizes: 3⁄16",
1
⁄4", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2" Mfr. #S700.
Nut Driver Kit
Metric
Compact
Convertible Nut
Driver Set
•Contains assortment of
ten nutdrivers including
3
⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32",
3
⁄8", 7⁄16", 1⁄2", 9⁄16" •Housed
in a sturdy plastic case
to keep nut drivers
orderly on work bench
or for field service
•Handles more jobs
with fewer tools,
saves bench space and
lightens service kit •Equipped with remarkable
black, “piggyback” torque amplifier handle •Set housed in
attractive, easy to open, clear plastic case Set includes:
•3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 10mm nutdrivers; Torque
amplifier handle; Clear plastic case
Order #
96-1900
ONLY
$59.99
Order #
96-1910
(1-2 sets) $49.99 (3 sets-up)
$47.46
Driver Handle
Magnetic
1
⁄4" Bit
Holders
•Ergonomic power
handle grip for
maximum torque and comfort •Directs magnetism through
the bit for secure screw holding •Bits not included
Order #
38015
22-2999
38450
LIFETIME
WARRANTY
Description
Regular handle w/ six bit storage
MicroFinish handle
SoftFinish handle
ONLY
$12.99
16.99
9.99
Precision Hex and
Torx Driver Sets
LIFETIME
WARRANTY
•Precision tapered handles •Exact fit
hardened tool steel tips •Eight piece
inch hex set includes: .028", .035",
.050", 1⁄16", 5⁄64", 3⁄32", 7⁄64", 1⁄8" •Seven
piece metric hex set includes: .71, .89,
1.3, 1.5, 2.0, 2.5, 3.0mm •Six piece
torx set includes: T6, T7, T8, T9,
T10, T15
Precision Ball Point
Hex Driver Sets
hardened tool steel tips •Seven piece inch
set includes: .050", 1⁄16", 5⁄64", 3⁄32", 7⁄64", 1⁄8",
9
⁄64", 5⁄32" •Five piece metric set includes:
1.3, 1.5, 2.0, 2.5, 3.0mm
Description
7 piece inch hex set
5 piece metric hex set
Order #
22-1810
ONLY
$47.99
Hex/Torx Drivers
Order #
22-2800
22-2801
20
PS-120V Nut
Driver Set
•General-purpose
selection of the most
frequently used nut
drivers •Standard length
3" shank for most
applications •Fits over
long bolts and studs
•Overall length: 63⁄4"
(metric set), 63⁄4" and
75⁄16" (SAE set)
Order #
22-9438
22-9440
Section
ONLY
$29.99
22.49
Hex Type Screwdriver Handles
Magnetic handle is great for any standard hex bit. Ideal
for use with MCM security bits and game bits. Accepts
any standard 1⁄4" hex bit. Screw cap handle provides
storage for up to eight bits. Handle length 33⁄4".
Limited quantities.
Order # Description ONLY
22-2797 8 piece inch hex set $28.99
22-2798 7 piece metric hex set 25.49
22-2799 6 piece torx set 30.99
Order # Shaft Length (ea.) (2-9) (10-49) (50-up)
22-1620
33⁄4" $4.99 $4.65 $4.21 $3.92
20
Precision Nut Drivers
LIFETIME
WARRANTY
Precision
Metric Nut
Driver Set
LIFETIME
WARRANTY
Precision Single Nut Drivers
Order #
22-2831
22-2832
22-2834
Description ⁄32" x 60mm 3
⁄16" x 60mm 1
⁄4" x 60mm 5
ONLY
$5.02
5.25
5.25
Follow us on:
Precision Nut Driver Sets
Set includes: •Seven
different nut driver sizes
(1.5, 1.8, 2.0, 2.5, 3.0, 3.5,
4.0mm) •Rotating cap for precise turning and control with
fingertip •High performance CVM steel •Precision ground
tip for exact fit •Length: 60mm
Order #
26592
ONLY
$35.49
hardened tool steel tips •Eight piece
inch nut driver set includes: 3⁄32", 7⁄64", 1⁄8",
9
⁄64", 5⁄32", 3⁄16", 7⁄32”, 1⁄4” •Eight piece metric
nutdriver set includes: 2.5, 3.0, 3.5,
4.0, 4.5, 5.0, 5.5, 6.0mm
Order #
22-2802
22-2803
MCMelectronics.com
Description 8 piece inch nut driver set 8 piece metric nut driver set ONLY
$40.99
29.99
page
385
Section
20
Tools
Hex and Torx Keys
YEAR LIMITED
1WARRANTY
Nine Piece Folding
Hex Key Set
•Hex keys featured
hardened and tempered
steel with black oxide
finish •Keys easily fold
into carry handle for easy
storage •Precision
machined for exact fit
•SAE set includes: 5⁄64",
3
⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16",
7
⁄32", 1⁄4"
30 Piece Hex
Key Set
•Includes 15
each of both
short-arm
metric and
long-arm SAE
sizes of the
most common
hex sizes in a handy case •SAE: 0.028", 0.035", 0.05", 1⁄16",
5
3
7
1
9
5
3
7
1
5
⁄64", ⁄32", ⁄64", ⁄8", ⁄64", ⁄32", ⁄16", ⁄32", ⁄4", ⁄16", and 3⁄8" •Metric:
0.7, 0.9, 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8, and 10mm
•Includes case
Order #
22-9668
MSRP
$19.99
Order #
22-8870
MSRP
$9.99
ONLY
$8.99
Order #
22-9842
22-9844
22-9846
22-9848
Description
Hex set
Ball hex set
Torx set
Slotted and Phillips set
Ten-piece sets
available in both
metric and SAE
sizes. •High torque
T-handles provide
firm grip and easy
turning •Heat-treated
steel with black
oxide finish for durability •Handles stamped with sizes
and an individually organized stand make it easy to find
the right tool
Description
SAE: 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3
⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8"
Metric: 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 8, 10mm
Order #
22-8875
MSRP
$18.99
ONLY
$9.99
18.99
9.99
MSRP
$7.99
(set)
$4.99
NEW!
Gorilla Grip®
Hex Key Set
•Hex keys feature chrome vanadium
steel with black oxide finish •Includes
convenient hex key holder for easy
storage •Precision machined for exact
fit •SAE set includes: 1⁄16", 5⁄64", 3⁄32", 7⁄64",
1
⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 5⁄16", 3⁄8"
page
386
(2 sets-up)
$8.74
Order #
21-3745
ONLY
$10.49
Nine Piece
Metric Hex Ket Set
•L-style hex keys comes in a
convenient caddy set •Durable
caddy contains a unique locking
feature and marked slots for each
key •Heat-treated and tempered
for added strength and durability
•Rust and corrosion resistant
•Includes metric hex sizes from
1.5mm~10mm •From 31⁄8"~51⁄4" in
length •Mfr. #LMK10
ONLY
$14.99
Order #
22-9406
#22-10370
#22-10375
Gorilla Grip® Folding Hex Keys
1-800-543-4330
Fax: 1-800-765-6960
Ball point hex keys offer greater
ease of use in tight spaces where
key cannot be inserted straight
into hex screw head. Short end of
key is standard hex type. Set
includes nine popular SAE sizes
from 5⁄64"~1⁄4" and plastic holder.
•Gorilla Grip® handle is 40%
stronger than steel •Protanium® high
torque steel keys for added strength
and durability •ProGuard™ finish
resists rust and corrosion •Made in
USA by Bondhus® for Grip Tools
Sizes include: •Metric: 1.5, 2, 2.5,
3, 4, 5, 6, 8, and 10mm •SAE: .050",
1
⁄16", 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32",
1
⁄4", 5⁄16", and 3⁄8"
#22-10380
#22-10385
ONLY
$9.99
Nine Piece Ball
Point Hex Key Set
ONLY
$15.99
Order #
22-10387
(set)
$8.99
Order #
22-9404
•Ergonomic molded grip
•Easy key access •Precision
machined tips •Push button key
release •Includes T7, T8, T9, T10,
T15, T20, and T25
Order #
36396
ONLY
$15.49
21.99
•L-style hex keys comes in a convenient
caddy set •Durable caddy contains a
unique locking feature and marked slots
for each key •Heat-treated and tempered
for added strength and durability •Rust
and corrosion resistant •Includes SAE
hex sizes from .05"~5⁄16" •From 215⁄16"~61⁄32"
in length •Mfr. #LLK12
Torx
PocketStar
Hex Key Set
12 Piece Hex Key Set
Order #
22-8890
Description 7 piece Torx L-Key set 9 piece Torx L-Key set Twelve Piece SAE Hex Ket Set
(2 sets-up)
$4.79
20
Order #
22-9714
22-9716
Order #
22-2843
22-2844
•Hex keys featured hardened
and tempered steel with
black oxide finish •Keys
easily fold into carry handle
for easy storage •Precision
machined for exact fit •Torx
set includes: T9, T10, T15,
T20, T25, T27, T30,
and T40
ONLY
$6.99
6.99
6.99
6.99
T-Handle
Hex Key Sets
(2 sets-up)
$4.31
Eight Piece
Folding Hex Key Set
Slim Folding Driver Sets
•Lightweight aluminum and a
very compact size make these
driver sets a unique and useful
addition to any tool-box,
emergency kit, or desk •Perfect
size to keep in your pocket •Each
set has ten popular sizes of
small drivers
(set)
$4.49
Torx L-Keys
•Torx L-Keys are perfect for
tight places where normal torx
drivers won’t fit •Seven piece
set (#22-2843) includes: T6,
T7, T8, T9, T10, T15, T20 in a
plastic holder •Nine piece set
(#22-2844) includes: T8, T9,
T10, T15, T20, T25, T27, T30,
T40 in a plastic holder
ONLY
$12.99
NEW!
•Gorilla Grip® handle is 40% stronger than steel •Protanium® high torque steel keys
for added strength and durability •Proguard finish resists rust and corrosion •Made
in USA by Bondhus® for Grip Tools •Metric and SAE available
Order #
22-10370
22-10375
22-10380
22-10385
Sizes
1.5, 2, 2.5, 3, 4, 5, and 6mm
2, 2.5, 3, 4, 5, 6, and 8mm
.05, 1⁄16, 5⁄64, 3⁄32, 7⁄64, 1⁄8, 9⁄64, 5⁄32, and 3⁄16"
5
⁄64, 3⁄32, 7⁄64, 1⁄8, 9⁄64, 5⁄32, 3⁄16, 7⁄32, and 1⁄4"
NET 30
Terms
ONLY
$5.99
6.99
5.99
6.99
Tools
Bits and Bit Sets
105 Piece
Security/Standard
Screwdriver
Bit Set
Security
Bit Drivers
Used for removing
tamper proof
fasteners often found in
Nintendo and Sega video games
and cartridges. 11⁄2" length, these
bits fit any standard 1⁄4" driver.
Order #
22-1145
22-1150
Size
3.8mm
4.5mm
MSRP
$8.99
8.99
(1-9)
$1.99
1.99
(10-24)
$1.79
1.79
(25-99)
$1.29
1.29
Security
Torx Bit Set
1
⁄4" hex size fits
standard screwdriver
handle. High-quality
bits remove standard and security type torx screws, a
necessity when opening many items such as IBM PS/2
monitors. Set includes: •One each: T-8, T-10, T-15, T-20,
T-25, T-27 and T-30 sizes.
Order #
21-3241
(set)
$8.59
(2-9 sets)
$8.29
(10-49 sets)
$7.89
Order #
22-3495
Tamper Proof
Torx 1⁄4" Insert Bits
•Exclusive Wiha made high quality hardened
chrome-vanadium-molybdenum steel •25mm in length
Order #
22-3004
22-3005
22-3006
Size TR7 TR8 TR9 ONLY
$2.11
2.11
2.11
Order #
22-3007
22-3008
22-3009
Size TR10 TR15 TR20 ONLY
$1.88
1.88
1.88
Four Piece
Spanner Bit Set
High quality bits remove
security screws from
telephone equipment,
CATV products and many
other items. 1⁄4" hex drive fits standard screwdriver handle
and most cordless drills. Kit includes: #4, #6, #8, and #10
spanner sizes.
Order #
21-3242
This complete set
includes security bits
to remove tamper
resistant screws found
in many of today’s
popular electronics as
well as standard bits
for more common fasteners. This kit also includes a
heavy-duty ratchet screwdriver with forward, reverse,
and conventional settings. The 105 piece kit contains:
3
⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16" slotted bits; #0,
#1, #2, #3, #4, drywall #2 Phillips bits; SD-5, 5.5, 6, 7, 8,
9, 10, 15, 20, 25, 27, 30, 35, 40, 45, 50 star drive bits; S-0,
1, 2, 3 square drive bits; Hex SAE 1⁄16", 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64",
5
⁄32", 3⁄16", 7⁄32", 1⁄4", 9⁄32", 5⁄16" bits; pozi #0, #1, #2, #3, #4 bits;
Hex mm 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 7, 8 bits; clutch 1⁄8", 5⁄32",
3
⁄16", 1⁄4", 7⁄32" clutch bits; T8, T10, T15, T20, T25, T27, T30,
T35, T40 security torx bits; 6, 8, 10mm torx bits; 5⁄32", 9⁄64",
1
⁄8", 7⁄64", 3⁄32", 5⁄64" security hex bits; 2, 2.5, 3, 4, 5, 6mm
security hex bits; #1, 2, 3, 4 tri wing bits; 4, 6, 8, 10mm
spanner bits; 25⁄16" magnetic extension bit holder; 1⁄4"
hex x 1⁄4" dr. socket adapter; three setting ratchet handle;
convenient carry case. All bits fit any 1⁄4" hex driver and
most power screwdrivers.
MSRP
$49.95
Precision
Phillips Bits
(1-4 sets)
$19.99
A
B
C
32 Piece
Security Bit Set
Handy pocket size set
contains many of the
bits commonly used to
remove tamper resistant
screws found in many
of today’s electronic
products. Items like IBM
PS/2 monitors, cable boxes,
telephone equipment and much more,
commonly use these type of screws. Kit contains: 6mm,
8mm, and 8mm torq bits; 4, 6, 8 and 10mm spanner bits;
#1, #2, #3 and #4 tri wing bits; 2, 2.5, 3, 4, 5 and 6mm
security hex bits; 5⁄32", 9⁄64", 1⁄8", 7⁄64", 3⁄32", and 5⁄64" security
hex bits; T8, T10, T15, T20, T25, T27, T30, T35 and T40
security torx bits; 60mm magnetic bit extension all housed
in a pocket sized carry case. Bits fit any standard 1⁄4" hex
driver such as #22-1620 and most power screwdrivers.
Order #
22-1875
MSRP
$34.99
(set)
$9.99
(2-4 sets)
$8.99
(5 sets-up)
$8.49
Five-Point Torx Security Bit Set
11 piece set of five-point security bits are for removing
security screws used in computer equipment, hard drive
enclosures, European automobiles, and other Torx Plus®
fasteners which are becoming more commonly used.
These do not fit standard six-point torx fasteners. •Hole
in center of the bit for tamper-proof fasteners •All bits 1"
long Set includes: (Torx equivalent sizes) T8, T9, T10,
T15, T20, T25, T27, T30, T40, T45, and T50 bits
• ⁄4" hex bits with
micro-sized Phillips
tips •Great for fasteners
found in small
electronics, optics,
instruments, and more
•Precision machined
•1" length
Size MSRP
#0 $2.99
#00
2.99
#000 2.99
(set) (2-9 sets) (10-49 sets) (50 sets-up)
$3.89 $3.67 $3.11 $2.43
20
(5 sets-up)
$17.95
1
Fig. Order #
A 22-9797
B 22-9798
C 22-9799
Section
(1-4)
$0.50
0.54
0.57
A
(5-9) (10-up)
$0.46 $0.40
0.50
0.48
0.53
0.50
B
C
Order #
22-9795
MSRP
$59.99
(1-4 sets)
$14.99
(4-9 sets)
$14.25
(10 sets-up)
$13.75
D
100 Piece Bit Set
⁄4" Insert Bits
1
Six Piece
Security Hex Bit Set
•Exclusive Wiha made high
quality hardened chromevanadium-molybdenum steel
•1⁄4" hex drive •Set includes:
5
⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64" and 5⁄32".
Order # (set) (2-9 sets)
21-3585 $2.99
$2.87
(10-49 sets) (50 sets-up)
$2.76
$2.67
Order #
Slotted Insert Bits
22-3001
22-3002
Phillips Insert Bits
22-3025
22-3026
22-3027
22-3028
Torx Insert Bits
22-3014
22-3015
22-3016
22-3017
22-3018
22-3019
22-3020
Pozidriv Insert Bits
22-3029
22-3030
22-3031
Description
.6 x 4.5 x 25mm 1.2 x 6.5 x 25mm
ONLY
$0.99
1.09
PH#0
PH#1
PH#2
PH#3
0.56
0.54
0.50
0.54
T5 x 25mm T6 x 25mm T7 x 25mm T8 x 25mm T9 x 25mm T10 x 25mm T15 x 25mm 1.36
1.36
1.36
1.36
1.36
1.13
1.13
PZD#0 x 25mm
PZD#1 x 25mm
PZD#2 x 25mm
0.69
0.65
0.65
Order #
22-9960
MCMelectronics.com
MSRP
$34.99
ONLY
$9.89
page
387
20
Follow us on:
Fig.
A
B
C
D
Includes standard
and security bits
•Organized with size
markings in a blow
molded case Includes:
•Square: 0, 1, 2, 3mm
•Torx: 6, 8, 10mm
•Spanner: 4, 6, 8,
10mm •Tri-wing:
1, 2, 3, 4
•Security (hollow
tip) torx: T8H,
T10H, T15H, T20H, T25H, T27H, T30H, T35H,
T40H •Security metric hex: 2, 2.5, 3, 4, 5, 6 •Security
SAE hex: 5⁄32", 9⁄64", 1⁄8", 7⁄64", 3⁄32", 5⁄64" •Clutch (bow-tie): 1, 2,
3 •Slotted: 3, 4, 4.5, 5, 5.5, 6, 6.5, 7, 8mm •Phillips: #0,
#1, #2 (five), #3 •Pozi drive: PZ#0, PZ#1, PZ#2, PZ#2,
PZ#2, PZ#2, PZ#2, PZ#3 •Metric hex: 1.5, 2, 2.5, 3, 4, 5,
5.5, 6, 8 •Imperial hex: 1⁄16", 5⁄64", 3⁄32", 7⁄64", 1⁄8", 9⁄64", 5⁄32", 3⁄16",
7
⁄32", 1⁄4" •Torx: T8, T10, T15, T20, T25, T27, T30, T40, T45
•Spline: M5, M6, M8 •Drive adapter •Magnetic hex bit
driver •Hook hanging bit (Y-design) •Socket drive bit
•Hex wobble adapter
Section
20
Tools
Chip and Precision Tools
Surface Mount IC Extractor
•Designed to easily remove 44~84
pin surface mount ICs without
bending or damaging chips •Made
of hardened spring steel
Order #
22-1200
Precision Chip Lifter
(ea.)
$10.49
(2-4)
$9.69
(5-up)
$9.19
IC Pin Straightener
•Quick and easy way to
straighten IC pins on DIP
and mini-DIP ICs •A ground terminal is provided to
reduce chance of static damage to CMOS ICs
Order #
21-1585
(1-9)
$9.39
(10-up)
$8.39
•Precision tapered handle •Hardened blade
•Lifts tight parts off of printed circuit boards
Order #
22-2804
ONLY
$5.50
Pin Extractor
A plunger style
pin extractor
for pushing
pins out from
behind the
connector blocks for contact sizes 16~20. Length: 3".
ProTurn Chip Lifter
•Molded on precision handle •Rotation cap •Black finish
blade •Hardened CVM tool steel
Order #
96800
Order #
21-8422
Mfr. #
R-5926
ONLY
$14.99
Eprom Removal Tool
•Easily removes EPROMs safely and effectively without
damaging leads •Lightweight
Order #
22-8065
ONLY
$6.99
ONLY
$5.61
Magnifying Glass
•General purpose magnifying glass
•Suitable for fine inspection, serial
number reading, stamp and coin
collecting, etc. •Magnification: 3x
•Diameter: 4"
Insertion/
Extraction Kit
Five Piece Hook Set
•Ideal for precision work or for inserting and removing
springs in hard to reach areas •Features five tips that
screw into a handle •Includes bent hook, angle hook,
J-hook, lift hook and W-hook •Stainless steel
Order #
22-3865
(set)
$9.99
This kit includes
DIP IC extractors
and inserters to
accommodate all
ICs from 40 to 80 pins. All tools that engage conductive
surfaces are CMOS safe and include grounding lugs where
appropriate. The kit consists of extractors EX-1 for 14~16
pin devices and EX-2 for 24~40 pin chips, plus inserters
MOS-1416, MOS-2428, and MOS-40 for 14~16, 24~28,
and 36~40 pin ICs respectively.
Order #
21-8410
Mfr. #
WK-7
Order #
22-9970
Stainless
Steel Forceps
•6" straight forceps
•For clamping and as
a third hand •Positive
snap-lock construction
•Serrated jaws
for holding small
components and wire
ONLY
$79.99
(2 sets-up)
$8.79
ONLY
$3.99
Order #
22-3860
(ea.)
$6.49
(2-up)
$5.89
Trimmer Adjustment Tool
B
•Glass filled nylon body with corrosion
resistant stainless steel blades •Extended as well as
recessed blade for critical adjustments •Designed to
adjust trimmers of all sizes •Includes pocket clip •Visit
MCMelectronics.com for complete specifications
C
Order #
8T000
20
A
Hemostats
ONLY
$2.71
D
•Clamps, hold and help
position small parts •Made of surgical
stainless steel
Order #
22-975
22-750
22-755
Length
31⁄2"
51⁄2"
5"
Type
Straight
Straight
Curved tip
(ea.)
$3.89
5.63
4.99
(2-4)
$3.49
5.16
4.67
Hook, Spring and Pull Tools
•Ideal for inserting, removing and adjusting fine springs
in hard-to-reach areas •Indispensable for precision work
in production and maintenance of fine instruments
•Highly polished
Fig.
A
B
C
D
Order # 22-1215 22-1220 22-1225 22-1230 page
388
Description 6" hook, spring, pull 6" hook, spring, push 8" hook, spring, pull & filter 7" hook, pull ONLY
$3.47
3.37
3.09
4.19
General® Pocket Scriber
Trimming Tool
Long shaft screwdriver type trim tool for TVs, monitors,
etc. 6" solid plastic shaft with short, in metal blade.
•Reversible hardened, centerless ground point stores in
handle when not in use •Dimensions: 6" (L) x 1⁄4" (dia.)
Order #
TL00157
Order #
22-3190
(1-9) $1.46 1-800-543-4330
Fax: 1-800-765-6960
(10-up)
$1.38
NET 30
Terms
ONLY
$5.11
Tools
Tweezers
B
A
Section
20
D
C
ESD Safe
Tweezers Kit
J
H
G
E
•Non-metallic
•Acid resistant
•Heat resistant
•ESD safe Four
piece set
includes: •Fine
pointed tips for microscopic parts, small round headed
tips for small chip capacitors, large round headed tips for
larger capacitors, and sharp, fine bent tips for inserting
and retrieving miniature parts
F
Precision Tweezers
•High-quality, stainless steel precision tweezers at incredible prices
•Perfect for technician, production, or hobbyist use •Anti-magnetic
Fig.
A
B
C
D
E
F
G
H
J
Order #
22-10070
22-10072
22-10074
22-10076
22-10078
22-10080
22-10082
22-10084
22-10086
Description
Fine point
Fine point taper
Slanted
Curved
Fine point narrow
Reverse action, insulated grip
Flat round
Angled with guide pin
Round object
Style
1
4
5A
7A
SS
(n/a)
2A
(n/a)
(n/a)
Length
43⁄4"
41⁄2"
43⁄4"
45⁄8"
51⁄2"
61⁄2"
43⁄4"
61⁄4"
47⁄8"
Handle Width
3
⁄8"
3
⁄8"
3
⁄8"
3
⁄8"
1
⁄4"
3
⁄8"
3
⁄8"
1
⁄4"
3
⁄8"
MSRP
$14.99
14.99
14.99
14.99
14.99
17.99
14.99
17.99
17.99
(1-5)
$4.99
4.99
4.99
4.99
4.99
5.99
4.99
5.99
5.99
(6-11)
$4.49
4.49
4.49
4.49
4.49
5.75
4.49
5.25
5.75
Order #
22-6490
(set)
$6.99
(12-up)
$3.99
3.99
3.99
3.99
3.99
5.52
3.99
4.49
5.52
A
F
L
Q
U
B
G
M
R
V
N
S
W
P
T
C
D
H
J
K
Wiha’s “Electronic Tech Series” of precision tweezers offer
many benefits to the user. These high quality professional tweezers are
ideal for precision electronic work. Features include: •Textured grip
surface •Hypo-allergenic, anti-glare •Anti-magnetic stainless steel •Acid
resistant Anti-static ESD safe •Made in Germany •Many different styles
to choose from
Follow us on:
Order #
44501
44502
44503
44504
44506
44507
44508
44509
44510
44520
44521
44522
44523
44524
44525
44526
44527
44530
44531
44532
44533
Description
Universal fine point
Sturdy long, fine round points
Long narrow body low force
Reduced body to medium point
Fine round points for assembly
Fine round points shorter
Very fine points/Tapered to tip
Extra fine points/Tapered to tip
Curved extra fine rounded tips
Universal blunt tip serrated
Microtip 45° hook
Microtip for chips angled
Long rounded to 1mm wide serrated
Flat bent 35°, 3mm diameter grip
Curved extra fine, 3mm long straight tip
Narrow body low force bent 35°-3mm tip
Angled extra fine points bent 30°, 3mm long tips
Flat bent 35°, 2mm diameter grip radius
ESD safe general purpose fine point
Heavy duty strong/Tapered to strong point
Angled and slightly bent with extra fine tips
MCMelectronics.com
X
Style
AA SA IND
GG SA IND
SS SA IND
2 SA IND
3 SA IND
3c SA IND
4 SA IND
5 SA IND
7 SA IND
40 SA IND
12 SA-SMD IND
13 SA IND
PSF SA IND
58 SA-SMD IND
7abb SA IND
SSbb SA IND
5abb SA IND
59 SA-SMD IND
1 SA IND
00 SA IND
7 SA IND
Length
130mm
130mm
135mm
120mm
120mm
110mm
110mm
110mm
120mm
145mm
120mm
120mm
125mm
117mm
120mm
140mm
117mm
117mm
120mm
120mm
120mm
ONLY
$12.99
20.99
15.99
18.99
19.99
19.99
20.99
20.99
25.99
20.49
24.99
24.99
19.49
22.49
30.99
25.49
26.49
22.49
20.99
26.49
25.49
page
389
20
Professional Quality Precision Tweezers
Fig.
A
B
C
D
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
(2 sets-up)
$6.71
Section
20
Tools
Wrenches
R2 RapidRench™
Adjustable
Ratcheting
Socket Wrench
•Replaces 38 most
popular socket sizes
•Fits hundred of SAE
and metric fasteners
•Tighten or loosen
with a flip of a
switch •Dial adjust
jaws to exact size of fastener •Jaw capacity (1⁄4"~7⁄8")
•Rubberized comfort grip for extra control and power
•Meets ASME specifications
Order #
96-2185
Mfr. #
FR28SWMP
Jaw Type
Smooth
ONLY
$21.99
Pivot Head Ratcheting
Wrench Set
•Ratcheting head pivots
180° for access to hard to
reach areas •Skilled
mechanics have called
this tool the most
versatile wrench set
ever •Ratchet feature
turns fasteners with just
a 5° swing vs. 30° needed for standard wrenches •Mirror
finished chrome vanadium steel construction for
maximum strength, durability, and corrosion resistance
•Available in SAE and metric
Order #
Mfr. #
96-1752
FRP7
96-1754
FRPM4
96-1756
FRPM7
Description
ONLY
SAE, 7 piece set $89.99
(5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 3⁄4")
Metric, 4 piece set 41.99
(10, 12, 13, 15mm)
SAE, 7 piece set 89.99
(8, 10, 12, 13, 14, 15, 18mm)
Combination Wrenches
•Wide I-beam for better gripping •Narrow
wrench heads for easier access •Satin
chromed sure grip body •Precision machined
open end for an exact fit •12 point exact fit super drive on
all box ends •Made in Germany
Order #
40043
40044
40045
40046
40048
40052
40054
Description
1
⁄4"
5
⁄16"
3
⁄8"
7
⁄16"
9
⁄16"
3
⁄4"
13
⁄16"
(1-4)
$8.94
8.94
10.99
7.99
9.99
19.99
22.49
(5-up)
$7.93
7.93
9.41
7.59
9.49
18.08
19.78
#96-2226
#96-2225
RapidSlide™ Adjustable Wrenches
•Slide mechanism in handles for fastest adjustment
possible •DIY, industrial or professional use •Debris
shield protects slide mechanism, and maintains a
smooth operation •Forged steel •Chrome finish resists
rust and corrosion •Polished head •SAE/Metric size
indicator on jaw
Order #
96-2225
96-2226
Mfr. #
AC8NKWMP
(1" jaw capacity)
AC10NKWMP
(1.2" jaw capacity)
Description
8" wrench
ONLY
$18.99
10" wrench
27.99
•Rubberized soft grip •Drop forged, heat treated,
polished and black nickel-plated jaws •Laser marked
metric graduations
Order #
Length
22-10010
6"
22-10012
8"
22-10014
10"
22-10016
12"
MSRP
$9.99
10.99
12.99
16.99
ONLY
$4.99
5.99
6.99
8.99
Four Piece
Adjustable Wrench Set
Heavy-duty carbon steel
wrenches with black
industrial finish. Constructed
with a rugged I-beam
handle, and four sided jaw
design for better fit and
greater stength. Includes
vinyl pouch. •Sizes: (length
x jaw opening): 12" x 11⁄2",
10" x 13⁄16", 8" x 1", 6" x 11⁄16"
•For professional,
industrial, or home use •Tension spring stabilizes jaw and
adjusts easily •Heat treated alloy steel •Chrome plated
with non-slip cushion grip
Order #
22-8386
(set)
$15.99
(2 sets-up)
$14.95
ONLY
$16.99
19.99
26.49
Order #
22-2215
Plastic handle,
double end socket
wrench is used for
placing fuses in
cable terminals
and connecting wires to fuses and binding posts. Overall
3
7
length is 7". Hex size: ⁄8" and ⁄16". Replaces Weco #216C
and Comcode #102450574.
Order #
22-1765
ONLY
$9.99
ONLY
$12.99
20
Length
6"
8"
10"
Capacity
20mm
24mm
30mm
40mm
•Drop forged, heat treated alloy steel •High polished,
chrome plated •Precision machined open and boxed ends
•Heavy-duty roll-up vinyl pouch •Includes the following
sizes: SAE (1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 9⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8")
and metric (1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 17, 19, 22mm)
Telco Can
Socket Wrench
Adjustable
Wrenches
Order #
96-1145
96-1146
96-1147
24 Piece Wrench Set
Soft Grip
Adjustable
Wrenches
Wrenches
•World famous adjustable wrenches made in the USA of
fine alloy steel •Proportioned dimensions engineered for
greatest strength •Tension spring under knurl helps
prevent jaw opening •Chrome finished
Order #
22-1455
22-1460
22-1465
page
390
Length (ea.) 4" $16.99 6" 17.99 8" 18.99 (2-4) $16.44 17.10 17.95 (5-up)
$15.05
15.75
15.95
Strap Wrench Set
30"/lb. Torque Wrench
•Two piece strap wrench set can loosen or tighten almost
anything including jars, oil filters, pipes, fittings, shafts
and pulleys •Cushioned grips for comfort •Small wrench
for diameters up to 4", and large wrench for diameters
up to 6"
•Use to torque 7⁄16" F-fittings with exact precision
•Specially positioned finger grooves on the handle
to ensure a true torque •Tool is factory preset to
30"/lb. of torque
Order #
22-9840
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$29.99
Order #
22-9662
NET 30
Terms
ONLY
$4.99
Tools
Wrenches
Section
20
All Steel Reversible Ratchets
•Get into tight places where
you don’t have room for a
handle swing •Contoured shape
provides a secure hold •Spring loaded, ball bearing,
reversible anvil keeps sockets secure while in use
•Available for 1⁄4" and 3⁄8" sockets
Order #
22-10090
22-10092
Socket Size
1
⁄4"
3
⁄8"
•Drop forged, heat treated,
and carbon steel •Chrome
NEW!
plated •Notches on extensions lock
onto sockets and ratchets •Sizes: #67080 (3", 6", 9"),
#67085 (3", 6", 8"), #67090 (3", 6", 8").
These all steel ratchet handles are manufactured
from alloy steel. The ratchet heads have precise 24
teeth movements and are fully reversible. The handles
are contoured and are weighted to offer the user comfort,
even over prolonged periods. Each ratchet head has a
quick release mechanism, whereby at the touch of a
button, the socket is released from the head. Available
with 1⁄4", 3⁄8", or 1⁄2" drives.
Order #
22-10930
22-10932
22-10934
Order #
22-8278
22-8280
22-8282
Three Piece Short
Extension Bar Set
Palm Ratchets
ONLY
$5.99
5.99
Mfr. #
67080
67085
67090
Size
¼” 3
⁄8”
½”
ONLY
$4.99
5.99
6.99
Description
⁄4" drive ratchet handle
3
1
1
(ea.)
$10.49
11.49
9.99
(2-up)
$9.63
10.45
9.49
Punchdown Tools
NEW!
Kit Includes:
66 Blade
Tool Extension
110 Blade
NEW!
PRO Series Punchdown Tool Combo Pack
Kit Includes: •PRO Series punchdown tool •Includes
66 and 110 style blades •Also includes punchdown tool
extension to extend reach by 21⁄4" •Combines a rugged
design with ergonomic function •Precision controlled
impact force settings for optimum termination of Cat 5e
and Cat 6 cross connects •Bayonet style (twist and lock)
blade retention socket is compatible with industry standard
tools and blades •Mfr. #13107MCM
Order #
22-10790
ONLY
$54.99
Pro Punchdown Tool
Punchdown Tool
•Ergonomic cushion grip is molded to shape of hand
provides comfort and easy operation •Non-slip grip •Spare
blade storage chamber in handle •Increased HI/LOW
forces to meet demands of all category cables through
Category 6 •Meets all industry requirements
Order # Mfr. #
22-10835 CP-3148
22-10840 5CP-16
22-10842 5CP-16A
22-10844 5CP-16B
22-10846 5CP-16D
22-10848 5CP-16BK
Description
ONLY
Punchdown Tool
$29.99
Replacement type 66 blade
4.99
Replacement type 66 and
4.99
110/88 blade
Replacement type 110/88 blade 4.99
Replacement type 630A blade 4.99
Replacement type
4.99
krone 110 blade
•Spring loaded for fast, low effort wire seating and
termination •Bayonet style blade retention socket is
compatible with industry standard tools and blades.
•Color-coded yellow on the cut side of the tool per
industry standard •Adjustable low and high force
impact settings are precisely controlled to meet the
industry standard 8762D spec •Will not damage sensitive
circuitry •Spare blade storage compartment in the handle
•Includes 66/110 combo blade •Available blade extension
fits indstry standard tools and blades for getting into
tighter spaces
Order #
22-9610
22-9614
Description
Pro series punchdown tool with blade
66 and 110 combo blade
ONLY
$44.99
14.99
Tool Kits
63 Piece Socket Set
This kit has one RJ-45/11 combination telcom crimp
tool with ratchet construction and built-in strip and
cut blades. Complete set contains: •Ratchet modular
connector crimping tool for 6P2C, 8P8C modular
connectors •Economic stripper and punch down tool
•Universal coaxial stripping tool •50 pieces RJ-11
modular plugs (6p4c flat) •25 pieces RJ-45 modular
plugs (8p8c round solid) •RJ-45 protection caps
•Blow molded case
This kit has all the tools necessary for professionally
servicing computers, printed circuit boards, peripherals,
and other electronic equipment. Kit contains: Reversible
T10/T15 Torx type driver, 1⁄4" flat screwdriver, #2 Phillips,
3
⁄16" flat screwdriver, #1 Phillips, 1⁄8" flat screwdriver,
#0 Phillips, square IC extractor, 3⁄16" nut driver, 1⁄4" nut
driver, three piece IC inserter, soldering iron, three piece
soldering aid tools, soldering stand, seven piece hex key,
soldering reel, brush, anti-static soldering sucker, IC
extractor, spare parts tube, anti-static wrist strap, tweezers,
parts retriever/extractor, side cutter, needle nose pliers and
a 6" adjustable wrench. Comes complete in a padded
black vinyl zipper case.
Order #
22-5290
Order #
22-1175
RJ-45/11 Combination
Telcom Termination Kit
ONLY
$44.99
Follow us on:
Order #
TLSS1463
(1-4 sets) $63.99 (5 sets-up)
$61.95
ONLY
$59.99
MCMelectronics.com
page
391
20
68 Piece Computer Tool Kit
•9 metric 6PT sockets: 4,
5, 6, 7, 8, 9, 10, 11, 13mm
•9 AF 6PT sockets: 3⁄16",
7
⁄32", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8",
7
⁄16", 1⁄2" •9 metric 6PT
sockets: 4, 5, 6, 7, 8, 9,
10, 11, 13mm •9 AF 6PT
deep sockets: 3⁄16", 7⁄32", 1⁄4",
9
⁄32", 5⁄16", 11⁄32", 3⁄8", 7⁄16", 1⁄2",
•11⁄4" drive quick-release
ratchet (rubber grip) •1
extension bar: 6" •1
spinner handle •1 bits adapter •13⁄8" M 1⁄4" F adapter
•3 flat screwdriver bits: 4, 5.5, 7mm •3 phillips
screwdriver bits: Nos 1, 2, 3 •7 torx bits: T-10, T-15,
T-20, T-25, T-27, T-30, T-40 •3 hex keys: 1.5, 2, 2.5mm
•6 hex bits: 4, 5, 6, 7, 8, 10mm •Quick-release ratchet
•High strength blow-molded box
Section
20
Tools
Tool Kits
25 Piece
Electronic
Tool Kit
Technician’s
Tool Kit
Kit contains:
Full range digital
multimeter, plastic
parts box, 7-in-1 wire
stripper/crimper,
15W quick heat
ceramic soldering
iron, soldering iron
stand with sponge,
solder, solder wick,
desoldering tool,
cleaning brush,
stainless steel tweezers, electrical tape, IC extractor,
1
alignment tool, nut driver ( ⁄4"), three slotted
screwdrivers (3 x 75, 5 x 75, and 6 x 100mm), three
Phillips screwdrivers (#0 x 75, #1 x 75, and #2 x 100mm),
utility knife, pen light, 6" adjustable wrench, two needle
files (round and flat), 5" side cutters, 5" long nose pliers,
and a seven piece folding hex wrench in a canvas zipper
carrying case. Carrying case has inside and outside file
folder pockets and a shoulder strap. Dimensions: 16" (W)
x 13" (L) x 3" (H).
Order #
22-3280
(1-2 kits)
$94.99
(3 kits-up)
$85.45
Kit contains:
•30W soldering
iron with cover
•Desoldering
pump •Six piece
screwdriver set
(three slotted,
three Phillips)
•Two precision
screwdrivers (slotted/Phillips) •5" long nose pliers •5"
diagonal cutting pliers •IC puller •Wire stripper strips up
to 10AWG wire •DMM measures AC/DC voltage, DC
amps, ohms, h transistors (includes battery and test leads)
•Eight piece hex key wrench set (1.5~6.0mm) •Long nose
tweezers •Padded zipper carry case
FE
Electronics Master Kit
Kit contains: 5" side cutters, 5" long nose pliers, 41⁄2" bent
nose pliers, 6" side cutters, 6" long nose pliers, 8" lineman
pliers, 91⁄2" water pump pliers, 91⁄2" wire stripper/crimper,
six piece precision screwdriver set, four Phillips
screwdrivers (#0 x 75, #1 x 75, #2 x 38, and #2 x
100mm), four slotted screwdrivers (3 x 75, 5 x 75, 6 x 38,
and 6 x 100mm), two nut drivers (5 and 6mm), 12VDC
test light, alignment tool, utility knife, 6" stainless steel
self-closing tweezers, IC extractor, seven piece folding
hex wrench, cleaning brush, electrical tape, pick-up tool,
flashlight, inspection mirror, six piece open-end wrenches
(6~19mm), 6" stainless steel scissors, five needle files
(round, half-round, flat, square, and triangle), 6"
adjustable wrench, three soldering aid tools, plastic parts
box, parts tube, hammer, 10’ tape measure, 15W quick
heat ceramic soldering iron, full size soldering stand,
solder, solder wick, soldering heat sink, and desoldering
tool in a hard carrying case. Carrying case has two
removable pallets, adjustable compartments in bottom,
and combination locks. Dimensions: 18" (W) x
13" (L) x 41⁄4" (H).
Order #
22-3282
(1-2 kits)
$149.00
(3 kits-up)
$134.10
Order #
22-8825
MSRP
$49.99
(1-2 kits)
$29.99
(3 kits-up)
$26.45
12 Piece Electronic Tool Kit
Kit contains: •30W soldering iron with cover
•Desoldering pump •4.5" long nose pliers •4.5" diagonal
cutting pliers •Two slotted screwdrivers •Two Phillips
screwdriver •Slotted precision screwdriver •Phillips
precision screwdriver •Utility knife •Padded zipper
carry case
Order #
22-8820
MSRP
$39.99
(1-2 kits)
$17.99
(3 kits-up)
$16.50
11 Piece
Computer
Service Tool Kit
Kit contains: Quick heat ceramic soldering iron, 5" side
cutter, 5" long nose pliers, 8" crimping tool, 6" adjustable
wrench, four Pro-Soft screwdrivers (slotted 3mm and
5mm, Phillips #0 and #1), spring hook, 3 prong holder,
utility knife, desoldering pump, alignment tool, ten piece
bit set, nine piece socket set, ratchet handle, and carry
zipper bag. Dimensions: 12" (W) x 10" (L) x 2" (H).
•This compact kit
has everything you’ll
need for servicing
computers, printed
circuit boards,
peripherals and
many more types of
electronic equipment. Kit contains: Two nut drivers,
three-claw parts retriever, assembly tweezers, #0 Phillips
and 1⁄8" slotted screwdriver, IC extractor, reversible #1
Phillips and 3⁄16" slotted driver, reversible T10 and T15
torx type driver and an extra parts tube •Comes in a
padded black vinyl zipper case
Order #
22-8610
Order #
22-1165
20
Jumbo Tool Kit
Kit contains: 40 piece 3⁄8" drive metric socket set, mini
drill set, 5" diagonal cutters, 5" long nose pliers, 41⁄2" flat
nose pliers, 41⁄2" bent nose pliers, 6" side cutters, 6" long
nose pliers, 6" slip-joint pliers, 8" lineman pliers, three
alignment tools, stainless steel tweezers, three soldering
aid tools, plastic parts box, hammer, IC extractor, five
needle files (round, half-round, flat, square, and triangle),
6" adjustable wrench, 6" hemostats, anti-static wrist strap,
stainless steel spring hook tool, seven piece folding hex
wrench, cleaning brush, electrical tape, pick-up tool,
penlight, inspection mirror, ten miniature combination
wrenches (5⁄32"~7⁄16"), wire strippers (20~30AWG), 91⁄2" wire
stripper/crimper, six piece precision screwdriver set, four
Phillips screwdrivers (#0 x 75, #1 x 75, #2 x 100, and #2 x
200mm), three slotted screwdrivers (3 x 75, 5 x 75, and 6
x 100mm), two nut drivers (1⁄4" and 3⁄16"), 10’ tape measure,
15W quick heat ceramic soldering iron, solder, solder
wick, soldering heat sink and desoldering tool in a hard
carrying case. Carrying case has two removable pallets,
adjustable compartments in bottom, combination locks,
and shoulder strap. Dimensions: 181⁄2" (W) x 133⁄4" (L) x
61⁄2" (H).
Order #
22-3283
page
392
(1-2 kits)
$249.00
Closed
Professional Electronic Tool Kit
(kit)
$44.99
(3 kits-up)
$235.00
1-800-543-4330
Fax: 1-800-765-6960
(2 kits-up)
$42.50
ONLY
$9.99
9 Piece Electronic Tool Kit
Kit contains: •30W soldering iron •Desoldering pump •Solder •6" adjustable
wrench •6" long nose pliers •5" diagonal cutting pliers •VOM meter measures
AC/DC voltage, DC amps, and ohms (includes battery) •#2 Phillips screwdriver
•Slotted screwdriver •Padded zipper carry case
Order #
22-8815
MSRP
$29.99
NET 30
Terms
(1-2 kits)
$17.49
(3 kits-up)
$16.79
Tools
Tool Kits
IC Insertion/
Extraction Tool Kit
Section
20
Eight piece kit
includes specific
inserters for the
following packages:
8 pin DIP, 14/16 pin
DIP, 18/20 pin DIP, 22
pin DIP, 24/28 pin DIP
and 36/40 pin DIP. Also includes IC extractor tweezer
and square IC extractor. Housed in vinyl zipper case.
Order #
21-3605
(1-2 kits)
$30.49
(3 kits-up)
$25.00
148 Piece
Professional Tool Set
Socket Set
A high quality seven piece precision screwdriver
and side cutter set. The ergonomically styled handles
are color coded with revolving tops, and the blades are
manufactured from nickel, chrome molybdenum steel
with hardened, black tips. Ideal for electrical terminals
and recessed screws. Contents: •Slotted: Tip 2.4mm,
blade 3" •Slotted: Tip 3.0mm, blade 4" •Slotted: Tip
4.0mm, blade 6" •Phillips: Tip 2.4mm dia., blade 3"
•Phillips: Tip 3.0mm dia., blade 4" •Phillips: Tip
4.0mm dia., blade 6" •31⁄2" side cutters.
•1⁄4" metric drive sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11,
12, 13 and 14mm •1⁄2" drive flank deep sockets: 10, 11, 12,
13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30 and
32mm •Metric deep sockets: 6, 7, 8, 9, 10, 11, 12 and
13mm •Metric deep sockets: 14, 15, 17 and 19mm •1⁄4" x
2" extension bars (2" and 4") •1⁄2" extension bars (5" and
10") •1⁄4" and 1⁄2" drive universal joints •1⁄4" and 1⁄2 quick
ratchet handles •1⁄2" drive spark plugs: 16 and 21mm •Hex
key wrenches: 1.5, 2, and 2.5mm •6" spinner handle
•Slotted: 4, 5.5 and 7mm; Hex: 3, 4, 5 and 6mm; Phillips:
#1 and #2 •Pozi: #1 and #2 •Torx: T8, T10, T15, T20, T25
and T30 •Bits: Regular: 8, 10 and 12mm; Hex: 8, 10, 12
and 14mm; Philips: #3 and #4; Pozi: #3 and #4; Torx:
T40, T45, T50 and T55 •Bit adapter •Bit holder •Three
way adapter •1⁄4" x 6" flexible extension •1⁄4" drive
sliding T-bar
Order #
TL00180
Order #
22-10038
Electronic Screwdriver Set and Cutters
(1-4 sets) $16.99 (5 sets-up)
$15.59
MSRP
$129.00
ONLY
$59.99
Ten Piece
Insulated Tool Kit
•Ten piece insulated
set includes: 2.5, 4, 5,
and 6mm slotted
screwdrivers; #0, #1,
and #2 Phillips
screwdrivers; 6" side
cutter; 6" long nose
pliers; 6" combination
pliers •Shafts
insulated to 1KV
•Includes canvas
zipper case
14 Piece
Insulated
Tool Kit
•Individually
tested tools certified
to 1000V •German precision machined for an exact
fit Kit Includes: •Long nose pliers 8" •Lineman’s
combination pliers 9" •High leverage diagonal cutter
8" •Stripping pliers 6.5" •Side cutter 6.5" •Insulated
screwdrivers •Slotted: 5⁄64, 3⁄32, 1⁄8, 9⁄64, 3⁄16,1⁄4 •Phillips: #0,
#1, #2 •Tool box
Order #
22-7380
ONLY
$39.99
Order #
32895
Follow us on:
70 Piece
Professional
Tool Set
•All tools in
this industrial
quality tool set
meet astringent
new ANSI/
ASME
specifications •The 72-tooth ratchets require only a 5°
swing •Large quick push-button release must be engaged
to remove sockets •Ergonomic designed 1⁄4" and 3⁄8" quickrelease ratcheting drive •Wide selection of standard and
deep sockets in the most common SAE and metric sizes
•12 point designed sockets help ensure maximum torque
•12 piece combination wrench set (six SAE, six metric)
•Includes high impact plastic case •Also includes drivers,
bits, hex keys, and more
Order #
96-1975
ONLY
$59.99
#96-1083
ONLY
$329.00
259.00
•All tools in this
industrial quality
tool set meet
astringent new
ANSI/ASME specifications •The 72-tooth ratchets require
only a 5° swing •Large quick push-button release must be
engaged to remove sockets •Ergonomic designed 3⁄8"
quick-release ratcheting drive •Wide selection of standard
and deep sockets in the most common SAE and metric
sizes •12 point designed sockets help ensure maximum
torque •Includes high impact plastic case
Order #
96-1970
MCMelectronics.com
ONLY
$34.99
page
393
20
•Fine blending of quality hand tools •Available
in a rugged soft case with leather wrapped
handles or a super tough molded hard case
with aluminum hardware Kit contains:
Straight and tee handles, 9 hex socket screw
blade, reamer, extension, 3 Phillips screw
blades, 4 slotted screw blades, 7 hex nut driver
blades, 6" curved nose seizer, 6" adjustable wrench, 61⁄2" long nose pliers,
7" utility pliers, 4" diagonal pliers, 5" diagonal pliers, 51⁄2" needle nose
pliers, electronic snips, wire stripper-cutter and electrician’s knife.
Description
Soft case kit
Hard case kit
ONLY
$99.99
30 Piece
Professional
Tool Set
Tool Kit with Case
Mfr. #
TCS200ST
TCMB200ST
Order #
96-1965
ONLY
$199.00
#96-1081
Order #
96-1081
96-1083
•All tools in this industrial quality tool set meet astringent
new ANSI/ASME specifications •The 72-tooth ratchets
require only a 5° swing •Large quick push-button release
must be engaged to remove sockets •Ergonomic designed
1
⁄4", 3⁄8", 1⁄2" quick-release ratcheting drivers •Wide selection
of standard and deep sockets in the most common SAE
and metric sizes •12 point designed sockets help ensure
maximum torque •12 piece combination wrench set (6
SAE, 6 metric) •Set also includes drivers, pliers, hex keys
and more •Includes high impact plastic case
Section
20
Tools
Telecom Tool Kits
Master Telecom
Installation and
Service Kit
Coax Termination Kit
This complete set provides all the tools to crimp a variety
of coaxial cables. Set contains: •Super Crimp frame
w/RG-58, 59/62 BNC/TNC die set •Universal coaxial
crimping tool •RG-58, RG-174, RG-8218 die set
•RG-174, BNC/TNC die set •RG-6, RG-174 die set
•Plenum and teflon cables RG-58, RG-59 die set •BNC
connectors: Five pieces each of BNC crimp plug for
RG-58, BNC crimp plug for RG-59/62, BNC female/
female adapter, BNC “T” adapter, BNC terminator
•Blow molded case
Order #
22-5295
(kit)
$109.00
(2 kits-up)
$101.50
Designed specially
for telecom installers,
network and cable
television engineers.
Kit includes: •Rotary
cable stripper •Blowing
brush •Soldering wick
•7" extension blade
•Super torque ratchet
handle •Driver blades:
Torx (T6, T7, T8, T9, T10,
and T15), Phillips (#0, #1,
and #2), slotted (3mm, 5mm, and 6mm), nut driver (1⁄4",
3
3
7
11
⁄8", ⁄16", ⁄16", ⁄32", 3mm, 4mm, 5mm, and 6mm) •Wrist
strap •5" cutting pliers •5.5" long nose pliers •8" lineman’s
pliers •33⁄4 auto-ranging digital multimeter •All purpose
snips •Adjustable wrenches (6" and 10") •8.7" fiber
optic crimping tool •Hex key set •Double end socket
can wrench •Utility knife •Telecom crimp tool •Testing
screwdriver •Utility component storage box •Soldering
iron •Precision wire stripper •All-in-one toner and probe
kit •Telecom test set •Tool case with pallet
Order #
22-10192
Deluxe Telecom
Installer’s Kit
Ideal for installing,
maintaining, and
troubleshooting
telecom networks.
Includes a useful
PVC tool case to
organize all included
pieces. Kit includes:
•Telecom test set
•6" straight forceps
•Electrician’s knife •5"
cutting pliers •5.5" and 6"
long nose pliers •Probe spudger
•Electrician’s scissors •Pocket
screwdriver •Pro-soft screwdrivers (Phillips
#1 and #2; slotted 8mm and 6mm) •Precision wire stripper
•110/66 punch down tool •Tone probe kit •In-line modular
adapters •Hex key set •Soldering iron •Bag with pallets
Order #
22-10195
ONLY
$329.00
Telecom Test Set
•Test set for use separately
or replacing piece included in
#22-10192 and 22-10195 kits
•Test multiple telecom functions
from RJ-45 and bare telecom wire
•Backlit LCD display •Indicator for
net service and speed •Headset and
neck strap for hands-free use •Battery
life indicator •62 caller ID memories
•16 number memory •Tone and pulse
dialing modes •Cable continuity and
line polarity indicator •RJ-45 port with
alligator clip adapter •Requires three
“AAA” 1.5V batteries (not included)
Professional
Telephone
Termination Kit
Kit includes: Heavy
duty ratcheting modular
crimping tool for 8P8C/
RJ–45, 6P6C/RJ–12,
6P4C/RJ–11, and 4P4C
plugs; Impact and punch
down tool with 66/110
blades; 30 pieces RJ–45
unkeyed modular plugs;
30 pieces RJ–11/12
modular plugs; Deluxe
storage case.
Telco
Termination Kit
Perfect for field
data comm work.
Kit contains: Wire
stripper tool, multimodular cable tester, punch
down tool with 110/66 blades,
modular crimping tool,
6P4C (RJ-11) modular plug (50
pieces per bag), 8P8C modular plug
(RJ-45) stranded (25 pieces per bag)
and zipper case
Order #
22-9308
(1-2 kits)
$149.00
(3 kits-up)
$137.00
Order #
22-7205
(kit)
$59.99
ONLY
$219.00
Order #
22-10190
ONLY
$59.99
(2 kits-up)
$57.59
RJ-45/11 Telcom
Termination Kit
20
This high quality kit
includes: •Telemaster™ multifunctional cut, strip, and crimp
tool •15 pieces of 4-position,
RJ-11 stranded modular plugs
•15 pieces of 6-position, RJ-11
stranded modular plugs •15 pieces of 8-position, RJ-45
stranded modular plugs •Crimp tool is made of steel for
durability and dependability •Deluxe blow molded case
Order #
22-6240
Professional Twisted
Pair Installer Kit
(kit)
$79.99
Fiber Optic Tool Kit
Kit contains: Fiber optic stripper, high carbon alloy steel
scissors, fiber optic scribe, cleaning kit, microscope 100x,
side cutter, universal syringe, SC polish disc, ST polish
disc, utility component storage box, crimp tool (.042",
.068", .133", .162", .195"), and carrying zipper case.
Dimensions: 11" (W) x 8" (L) x 4" (H).
Order #
22-8604
(kit)
$109.00
(2 kits-up)
$104.64
This kit is ideal for identifying, cutting, stripping,
and terminating twisted pair cable. Set contains:
•Super crimp frame with RJ-45 die set •Universal
coaxial crimping tool •Punch down tool with 66/110
blades •RJ-11 die set •RJ-11 DEC die set •AMP RJ-45
die set •RJ-22 die set •50 pieces RJ-11 modular plug
(6p4c flat) •25 pieces RJ-45 modular plug (8p8c round
solid) •Blow molded case
Kit contains: •Super Crimp frame with RJ-45 die set •RJ-11 die set
•Economic stripper and punch down tool •Wire stripper/cutter •50 pieces
RJ-11 modular plug (6p4c flat) •25 pieces RJ-45 modular plug (8p8c
round solid) •20 pieces RJ-45 protection caps •Deluxe blow-molded case
Order #
22-5300
Order #
22-5285
page
394
(kit)
$109.00
Deluxe Twisted Pair Kit
(2 kits-up)
$104.64
1-800-543-4330
Fax: 1-800-765-6960
(kit) $49.99 NET 30
Terms
(2 kits-up)
$44.95
Tools
Cordless Screwdrivers
VersaPak® PivotDriver®
Cordless Screwdriver
•Compact size, length 107⁄8" in straight
form •Lightweight, only 1.1 lbs. •Boosts
a powerful 39 in. lbs. of torque and up to 600rpm
to help fasten and loosen screw and bolts •1.5Ah
Li-Ion battery pack lasts up to 21⁄2 times longer
than a Ni-Cd pack •30 minute quick charging system •1⁄4"
hex quick change chuck •21-stage clutch with auto shutoff for a wide variety of applications •LED work light
illuminates dark and tight areas Kit includes: •Drill driver
•Two 1.5Ah Li-Ion batteries •30 minute charger •Carrying
case •Mfr. #EY7410LA2S
Order #
22-9618
Order #
22-5500
ONLY
$169.00
ONLY
$39.95
Heavy-Duty 1⁄4" 7.2 Volt
Cordless Two-Position Screwdriver Kit
VersaPak®
Gold Battery
•60% more run time
over standard VersaPak® batteries •Interchangeable battery
system works with all VersaPak® products •Designed for
repetitive charging; no memory •Grooved cap provides
superior gripping surface
Order #
22-4035
22-4036
22-4042
Mfr. #
VP110
VP143
VP142
Description
One pack
Two pack
Charger and one battery
ONLY
$21.95
39.95
34.95
99-PA-50 Tool Kit
Order #
22-5505
22-5515
•For use with cordless
screwdrivers •12 piece set
contains seven nut drivers,
two slotted and two Phillips
screwdrivers and a cordless
screwdriver adapter •Comes in a
vinyl case •Can also be used with any
99 series handle
(kit) $23.99 (2-4 kits) $22.50 (5 kits-up)
$20.25
30 Piece
Fastener
Drive Set
(set)
$29.99
(2 sets-up)
$27.52
Power Nut Driver Set
•14 piece nut driver set with 1⁄4"
hex quick-change shank for power
drivers •Drop forged, heat treated
steel •Includes metric sizes:
5.5mm, 6mm, 7mm, 8mm, 10mm, and 12mm •Includes
SAE sizes: 3⁄16", 1⁄4", 9⁄32", 5⁄16", 11⁄32", 3⁄8", and 7⁄16"
Order #
22-9836
ONLY
$4.99
Follow us on:
Description
Cordless drill
Battery pack
MSRP
$220.00
-
ONLY
$149.00
34.99
This drill features a multi-stage
clutch and a 2-speed gear box. It offers a
maximum torque of 26 in. lbs. and 400rpm on
high speed. It easily converts from straight to
pistol form. In addition it is reversible, has a 1⁄4"
hex drive and a one hour charging system.
Description
Cordless drill
Battery pack
Order #
22-8456
22-8458
Description
ONLY
7.2V cordless two-position $99.95
screwdriver kit
Replacement 7.2V compact battery 31.95
•Ideal for DIY
projects •Forward
and reverse trigger
switch •Uses 1⁄4" hex bits •150rpm
•11 bits •Uses four “AA” batteries
(not included)
2.4 Volt Cordless
Drill and Driver
Order #
22-5510
22-5520
•Adjustable two-position handle allows for operation
as both in-line and pistol-grip •80 in./lbs. of maximum
torque output provides for a superior power to weight
ratio in a variety of fastening applications •Variable
speed and reversing trigger switch provides 0~500rpm
for fastening and pre-drilling into wood, plastic, and light
gauge metal •Industrial quick release hex-shank chuck
allows for quick screwdriver bit change and prevents bit
“run out” •Electric brake provides increased productivity
•7.2V battery pack allows for longer run-time and charges
in one hour •Heavy-duty metal hinge provides secure and
sustained two-position lock Specifications: •Voltage:
7.2V •No load speed: 0~500rpm Max. Torque: 80 in./lbs.
Kit includes: •One hour charger •Two 7.2V compact
batteries •Two screwdriver bits •Heavy-duty kit box
Order #
22-10215
MSRP
ONLY
$134.00 $89.99
-
25.99
MSRP
$19.99
ONLY
$12.99
4.8 Volt Rechargeable
•Ideal for light trade and hobbyist use
•Rubberized grip •Forward and reverse
trigger switch •Uses 1⁄4" hex bits •150rpm
Kit includes: •4.8V driver •110V charger
•Three drill bits •20 driver bits •Bit adapter
•Blow molded carry case
Order #
22-10220
10.8 Volt Pocket Driver
MSRP
$29.99
20
Set contains: Insert
bits: Phillips #1 (2),
#2 (7), #3 (2);
square recess #1, #2
(5), #3; slotted 6-8,
8-10, 10-12 plus
magnetic bit holder.
Double-ended bits: Phillips #2 (2), square recess #2,
slotted 8-10. Four magnetic nut setters 1⁄4", 5⁄16", 3⁄8", 7⁄16".
Order #
22-8630
3.6 Volt Cordless Drill and Driver
This drill features an “auto shut-off” clutch that will
extend battery and clutch life by immediately stopping
rotation when torque setting is reached. The 22 stage
clutch offers precise settings and a accuracy of ±5%.
Offers 600rpm and 39 in. lbs. torque. Other features
include a 15 minute charging system and 1⁄4" quick
connect chuck.
Power Bit Sets
Order #
96-370
20
3.6 Volt Li-Ion
Drill and Driver
•Handle locks in two positions:
In-line grip for standard
screwdriving and pistol grip for those
hard to reach places •High power and
torque: 3.6V, 40 in./lb. torque •Automatic
spindle lock for greater control when starting
and finishing screws •Forward/
reverse ergonomic switch
for easy screw installation
and removal •Includes:
Cordless PivotDriver®, (1)
VersaPak® battery, (1)
charger, and (1) double-ended
bit (Phillips/slotted) •Mfr. #VP800
Section
ONLY
$18.99
•Ultra-compact lithium-ion power and
design is almost half the size of a 12V
compact drill/driver •80 in./lbs. of torque
drives 100 3" screws per battery charge •0~400rpm
variable speed •LED light •1⁄4" quick change chuck •10+1
reversible clutch •Variable speed trigger Kit includes:
•Carry case •Two power drive bits •30 minute charger
•Two Litheon™ 10.8v batteries •Mfr. #PS20-2
Order #
22-10238
22-10242
22-10244
Description
Pocket driver
10.8V battery
10.8V charger
ONLY
$149.00
59.99
59.99
MCMelectronics.com
page
395
Section
20
Tools
Rotary Tools
18 Volt Cordless
XRP™ Cut-Out Tool
RZ25™ Spiral
Saw System
•All-around spiral
saw for professionals
•Extra-long 50' cord
•Sealed switch protects
tool from dust and
contamination •Extra
strong metal bezel
•5.5A power motor
•Quick release foot
adjustable up to 1" deep
cuts •5⁄32" collet system
Order #
22-10246
ONLY
$84.99
•Designed for hole
cutting in drywall and
general purpose •Quick
bit change for fast and
easy bit changing without
a wrench •26,000rpm
motor provides superior cutting power •Dust sealed switch
for durability and long switch life Includes: •Cut-out tool
•One-hour charger •Two 18V XRP™ batteries •General
purpose bit •Drywall cutting bit •1⁄4" and 1⁄8" collets •Kit
box •Mfr. #DC550KA
Order #
22-10760
ONLY
$199.00
300 XPR Rotary Tool
R18V™ Cordless Spiral Saw
•Cordless spiral saw powered by a 18V
2.4Ahr Bosch Blue Core battery for long life
•30,000rpm •Dust resistant
switch •Extra strong
metal bezel •On-board
storage for wrench and
bits •Quick release
detach •Quick release foot
adjustable up to 1" deep cuts
5
• ⁄32" collet system •Mfr. #RX18V-1100
Order #
22-10250
ONLY
$159.00
•Variable speed from 5,000~35,000rpm •Lightweight 18
oz. design and comfort grip housing for comfort during
prolonged use •“Dove-tail” feature for Dremel-exclusive
attachments •On-board tool storage keeps your wrench
close at hand •Click-and-set on/off switch allows precise
speed selection •Cool-running ball bearing construction
for smooth and quiet operation •6' cord length •1.15A
•Mfr. #300-N/25
Order #
ONLY
$64.99
22-10270
#22-10312
#22-10314
Circle
Cutting Guide
•The ideal
accessory for
installing recessed
lighting and ceiling
speakers in ceiling
tile •The CRCT1 works with all new “RZ” model Spiral
Saws™ •Cutting diameter 3.5"~12" •Length 2.3"
•Weight .35 lbs.
ONLY
$14.99
#22-10318
#22-10319
#22-10322
•Articulating drill press
drills perpendicular and
angled holes in 15°
increments, up to 90°
horizontal •Tool holder
holds tool at 90° horizontal
for tasks such as polishing
metal objects, sanding
different shapes and
grinding metal pieces
•Flex shaft tool stand allows
telescopic adjustment to any
height between 16" and 29"
•Crow’s nest provides
on-board storage for drill bits,
wrenches, and other Dremel
accessories •Cord management
clips •Inch and metric
markings on base •Depth
markings with depth stop
•Sturdy metal base with four clamping points to securely
hold workpiece •Fits Dremel tools: 275, 285, 300, 395,
398, 400, 780, and 800 •Mfr. #220-01
Order #
22-10276
Includes a
variety of the
following: •1⁄8"
high speed cutter
•Brush cup •1⁄2"
felt polishing
wheels •Plastic
polishing
compound •Felt wheel •60 grit sanding drum and mandrel
•Sanding bands •Coarse sanding discs •Sanding discs
•Cut-off wheels •Mandrels •Wrench •Cut-off wheels
•Aluminum oxide grinding stones •Silicone carbide
grinding stones •1⁄4" drill bit •Mfr. #697-06
Order #
22-10278
Rotozip Bits
Variety of Rotozip bits for cutting and routing all types
of materials.
Order #
Mfr. #
Qty.
22-10312 XB-MP2
2
22-10314 DC1
1
22-10316 ZB10
10
22-10318 XB-MC1
1
22-10319 SC5
5
22-10322 XB-FT1
1
Cuts
Multi surfaces
Cement,
stucco, plaster
Drywall
Metal
Wood, plastic
Tile
ONLY
$10.99
19.99
9.99
19.99
8.99
39.99
52 Piece General
Purpose Bit Kit
#22-10296
#22-10298
Cut-Off Wheels
#22-10300
•Cut-off wheels make it easy to cut or slot bolts, screws,
sheet metal, thin wood, and plastic •#22-10298 pack
includes 36 15⁄16" cutting wheels •#22-10296 kit includes
69 cut-off wheels with a mandrel
Order #
22-10296
22-10298
22-10300
page
396
Mfr. #
688-01
409
402
Description
70 piece kit
36 cut-off wheels
Mandrel for cut-off wheels
ONLY
$14.99
5.49
2.49
•Most commonly
used bits in a reusable
storage box •Mandrels
•Felt polishing wheel
•High-speed cutter
•Cut-off wheels
•Grinding stones
•Nylon brush •Drum sander •Sanding band •Polishing
compound •Mfr. #687-01
Order #
22-10292
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$39.99
150 Piece
Accessory Set
20
Order #
22-10329
#22-10316
Workstation
and Drill Press
ONLY
$12.99
NET 30
Terms
ONLY
$19.99
Tools
Rotary Tools
Section
20
Mini Rotary
Tool Kit
Mini-Mate Cordless Rotary Tool
Li-Ion Cordless Tools
•Docking station holds the tools during projects while
charging battery •Soft grip housing •7.2V integrated
lithium ion battery holds a charge six times longer than
Ni-Cd and holds a charge for up to two years Stylus™
features: •Patented nose tip control •On/off at front
of tool for one handed operation •Variable speed
5,000~25,000rpm •Pistol grip design for outstanding
balance, performance and precision control Driver™
features: •Variable speed 0~300rpm •Motor brake
provides control, reduces screw stripping •Automatic
collet lock, for hand tightening when needed •Powerful
rare earth magnetic bit holder holds 1⁄4" hex shank bits
•Precision bit set included
Order #
22-10266
22-10262
Mfr. #
1130-01
1100-01
Description
Duo™ two tool kit
Stylus™
ONLY
$119.00
74.99
Clean and
Polish Kit
•Polish a variety
of materials and
clean hard to
reach areas
•Contains 20 bits
and polishing
compound so you
can keep metals
polished, clean
and lustrous
•Includes reusable storage box •Mfr. #684-01
Order #
22-10304
•Light-duty cordless rotary tool for precision jobs
•4.8V rechargeable and removable battery pack •Two
speeds: 6,500 and 13,000rpm •Knurled collet nut for fast
accessory changes; no wrench needed •Accepts bits up to
1
⁄8" shank
Order #
22-10258
22-10284
Mfr. #
750-02
755-01
Description
Mini-Mate kit
4.8V Replacement battery
•Versatile high-speed
tool engraves metal,
wood, plastic,
glass,
ceramics,
porcelain,
and leather
•Adjustable dial regulates depth from fine lines to
deep grooves •Includes carbide steel engraver point
•7,200 strokes per minute •5' cord •Mfr. #290-01
•185 assorted accessories
•Store all of your accessories
in one convenient foldable
canvas bag •Multiple
pockets for easy
organization •Included mini
kit fits into its own pocket
•Mfr. #700-03
ONLY
$19.99
52 Piece General
Purpose Bit Kit
Order #
22-10294
ONLY
$24.99
14.99
•All the tip accessories
you will ever need, for
use with most rotary tools
•Cuts, grinds, sands, drills,
sharpens and polishes
•Tips for metal, wood,
ceramic, glass and plastic
•Can be used for fine
detail work including
carving, engraving and
routing •Includes 2.25mm
(3⁄32") and 3mm (1⁄8") shanks
•Packaged in tilt-out
organizer case
Order #
22-9900
MSRP
$28.99
ONLY
$14.99
ONLY
$12.99
20
Order #
22-10290
MSRP
$49.99
28.99
150 Piece Rotary
Tool Accessory Set
•Inside this accessory
set are 52 assorted
bits for cutting,
grinding, carving,
engraving, shaping,
sanding, cleaning and
polishing •Application
and material usage information included •Bits are
organized in a removable tray
185 Piece Accessory Kit
Order #
Description
22-10205 Mini Rotary Tool Kit
22-9900 150 piece accessory set
Electric Engraver
Order #
22-10256
ONLY
$14.99
ONLY
$29.99
16.99
•Slim
rotary tool
is easy to
control for
precision
work, but powerful
enough for heavy-duty cutting and drilling •Handy for
drilling, cutting, cleaning, polishing, sanding, engraving,
and more •Keyless chuck with four collets for easy bit
change •55 piece accessory kit included •Everything is
organized in a clear-top aluminum case •No load speed:
8000~18000rpm
ONLY
$34.99
Flex Shaft
•Attaches to your rotary
tool in seconds •Comfort
grip hand-piece allows
comfort and fingertip control
•Integrated shaft lock button for
easy accessory changes •More
flexible cable with 5" bend
radius •Accepts up to 1⁄8" shank accessories •Works with
collet system and the Dremel chuck •Mfr. #225-01
Order #
22-10288
ONLY
$29.99
Follow us on:
105 Piece Engraver and
Grinding Accesssory Kit
Carbon Steel Brush
•This multi-purpose kit is ideal for use on rotary tools
•Cutting/carving •Cleaning/polishing •Grinding/
sharpening •Sanding •Includes cut-off wheels, sanding
discs, drum sander, sanding bands, polishing wheels,
polishing tip, wire wheel brush, dressing and grinding
stones, 3.2mm screw mandrel •Everything you need for
your rotary tool in one kit
•Ideal for cleaning and removing rust and
corrosion from items made of brass, copper or
other soft ferrous metals-such as tools, door
knobs, automobile parts and electrical contacts
•Its shape makes it well suited for cleaning flat
surfaces and getting into hard-to-reach places
like slots •Mfr. #428
Order #
22-10302
ONLY
$2.49
Order #
22-9128
MCMelectronics.com
ONLY
$9.99
page
397
Section
20
Tools
Cordless Tool Batteries
Power Tools
Heavy-Duty XRP™ 18 Volt
Cordless Reciprocating Saw Kit
•11⁄8" stroke length for faster cutting speed •0~3,000spm
for faster cutting speed •Four-position blade clamp allows
for flush cutting and increased versatility •Lever-action
keyless blade clamp for quick and easy blade changes
•Anti-slip comfort grip provides increased comfort and
control •XRP™ Extended run-time battery provides long
run-time and battery life •Pivoting adjustable shoe with
open top for maximum visibility •Variable speed with
trigger lock for increased blade control •Electric brake
•Tool weight: 8.2 lbs. Kit includes: •Saw •One-hour
AC charger •18V XRP™ PACK battery •Wood cutting
reciprocating saw blade •Heavy-duty kit carry box
•Mfr. #DC385K
Order #
22-9290
•Original equipment
manufacture batteries for
Panasonic cordless tools
•Available in 2.0Ah and 3.5Ah
capacities •Ni-MH (Nickel-Metal
Hydride) batteries are newly developed
batteries that do not use cadmium, making them more
environmentally friendly than standard Ni-Cd (NickelCadmium) batteries •Ni-HM technology allows for 75%
longer runtime in the same-sized battery •Both Ni-Cd and
Ni-MH batteries can be charged on the Panasonic standard
EY0110B charger •Long life: The Ni-MH battery pack
and Ni-Cd battery pack have similar life cycles (±1,200
charge/discharge cycles)
Order #
22-9318
22-9320
22-9322
22-9324
22-9326
Mfr. #
EY9251B
EY9231B
EY9136B
EY9201B
EY9106B
Volt Amp Hour
18V
3.5Ah
15.6V 3.5Ah
15.6V 2.0Ah
12V
3.5Ah
12V
2.0Ah
C
A
B
18 Volt Cordless Wet/Dry
Portable 1⁄2 Gallon Vacuum
•Small but strong, this hand held shop vacuum is able to
clean up everything from leaked paint to spilt screws
•18V XRP™ battery works with other 18V DeWalt tools
and chargers •1⁄2 gallon tank with heavy-duty latch is easy
to empty and clean •Dual clean-up modes allow for clean
up with either the front utility nozzle or heavy-duty
extendable rubber hose •Washable Gore™ HEPA Wet/Dry
filter traps 99.97% of dust at 0.3 microns for easy
breathing •Tool weight: 6 lbs. Includes: •18V XRP™
battery •One hour charger •Mfr. #DC515K
20
Type
ONLY
Ni-MH $129.00
Ni-MH 119.00
Ni-MH
89.99
Ni-MH
99.99
Ni-Cd
84.99
•NANO™
Phosphate
Lithium-ion
batteries provide
longer life and
more power in a
smaller and lighter weight package •Compatible with all
DeWalt 18V NiCd and NiMH tools (NANO™ batteries
require new charger) •Chargers compatible any DeWalt
NiCd, NiMH, or Li-Ion battery, 7.2~18V, in one hour
Fig. Order #
Mfr. #
A 22-9229 DC9180
A 22-9225 DC9180C
B 22-9227 DC9310
C 22-9228 DC9320
Description
ONLY
NANO™ 18V battery $139.00
NANO™ 18V battery 179.00
and AC charger
One-hour AC charger
99.95
Dual-port one-hour
149.00
AC charger
Cordless or
Corded Wet/Dry Vac
Order #
22-9550
22-9552
page
398
Description
Wet/dry vac
Replacement filter
ONLY
$109.00
28.31
D
A
C
B
F
E
J
H
G
K
L
NANO™ Li-Ion
Batteries and
Chargers
ONLY
$149.00
•Runs off of 12V~18V
DeWalt battery packs
(not included) or
120VAC (included)
•Gore™ wet/dry filter
eliminates changeovers and traps 99.7% of drywall
dust •Washable filter; tap or rinse with water to
clean •Heavy-duty 5' rubber hose provides durability
and flexibility •Drain port on 2 gallon tank for easy
emptying of liquids •On-board hose, cord and accessory
storage provides convenient transport and storage
•Weight: 7.2 lbs.
•Please check our website for additional batteries from
AEG, Milwaukee, Hitachi, Craftsman and Dewalt
N
ONLY
$249.00
Order #
22-9224
Quality Replacement Tool Batteries
Cordless Tool
Battery Packs
M
Q
P
R
S
T
U
Fig. Order # Volts mAh
Chemistry (1-4) (5-up)
Bosch / Skil® Replacement Batteries
A 294-0120 3.6V 1500mAh NICAD $19.99 $17.10
Makita® Replacement Batteries
B 294-0285 7.2V 2000mAh NICAD
43.99 38.66
C 294-0300 9.6V 2000mAh NICAD
52.99 47.79
C 294-0305 9.6V 2500mAh NIMH
49.99 47.04
D 294-0325 9.6V 1500mAh NICAD
33.99 30.26
E 294-0360 12V 2500mAh NIMH
58.99 54.42
F 294-0370 12V 2000mAh NICAD
57.99 52.19
G 294-0390 14.4V 2500mAh NIMH
80.99 73.30
Milwaukee® Replacement Batteries
H 294-0470 2.4V 1500mAh NICAD
19.99 17.21
H 294-0475 2.4V 2000mAh NICAD
22.99 20.49
H 294-0480 2.4V 2400mAh NICAD
26.99 23.61
J 294-0510 9.6V 2400mAh NICAD
63.99 57.48
K 294-0540 12V 2400mAh NICAD
82.99 77.67
L 294-0585 18V 2400mAh NICAD 118.95 111.64
Panasonic® Replacement Batteries
M 294-0595 2.4V 2500mAh NIMH
21.99 19.75
DeWalt® Replacement Batteries
N 294-1225 9.6V 1500mAh NICAD
32.99 28.99
P 294-1230 9.6V 2000mAh NICAD
41.99 40.21
Q 294-1240 12V 2000mAh NICAD
61.99 55.58
R 294-1245 12V 2400mAh NICAD
78.99 74.34
S 294-1255 14.4V 2000mAh NICAD
72.99 65.70
T 294-1265 18V 2000mAh NICAD
67.99 62.43
U 294-1270 18V 2400mAh NICAD 123.00 116.00
XRP™ and XR PACK® Extended Run-Time Batteries
•High capacity batteries have 40% (XR2), 25% (XR) more run-time than standard batteries •UL listed
Order # Mfr. #
Description
Voltage
22-3067 DC9096 18V XRP™
18V
battery pack
22-8460 DC9091 14.4V XRP™ 14.4V
battery pack
22-3078 DC9071 12V XRP™ 12V
battery pack
®
22-3082 DW9061 9.6V XR Pack 9.6V
extended run time battery
22-8458 DW9057 7.2V compact
7.2V
battery pack
1-800-543-4330
Fax: 1-800-765-6960
Features
High capacity battery,
40% more run time
than standard batteries
40% more run time
40% more run time
25% more run time
15% smaller than XR
Pack® batteries
10% lighter than XR
Compatible with
Entire line of DEWALT® 18V tools
ONLY
$89.95
Entire line of DEWALT® 14.4V tools
Entire line of DEWALT® 12V tools except for Univolt tools
Entire line of DEWALT®
9.6V tools except for Univolt tools
79.95
Entire line of DEWALT® 7.2V tools except for Univolt tools
31.95
NET 30
Terms
73.95
54.95
Tools
Power Drills
20
Hammer Drill
12 Volt Cordless 3⁄8"
Drill and Driver Kit
Panasonic’s cordless drill and drivers are
produced with concentration on the highest
quality and durability expectations. Soft grips,
compact size, and a balanced ergonomic
design provide exceptional comfort for
daylong use in any application. Full
torque at any speed dedicates plenty of
power for all extremes of drilling and
driving. Specifications: •Compact
size: Length 83⁄16" •Lightweight: 4 lbs.
•High power: 293 in./lbs. of torque
•Ergonomic design to reduce fatigue •Variable speed and
reversible •18 stage clutch •Two speed: Low 50~400rpm,
high 180~1300rpm •Electric brake Kit includes: •A quick
45 minute universal (7.2~24V) charging system •Two
standard capacity 2.0Ah Ni-CD batteries •A protective
carry case •Mfr. #EY6405FQKW
Order #
22-9312
Section
MSRP
$220.00
•Powerful drill/
hammer drill for drilling in
wood, metal, and masonry
•21 adjustable torque
clutch •Variable speed with
controllable top-speed dial
•Multi-position side handle for
better control •Depth control
bar •Switchable from hammer
to standard drill for drilling in multiple
surfaces •No load speed: 0~3000rpm
Order #
22-10222
MSRP
$69.99
18 Volt Cordless Drill Kit
•Ideal for light trade and hobbyist use
•Variable speed •Forward and reverse
switch •16+1 torque setting clutch •Builtin bit holder •Keyless chuck •No load
speed 0~550rpm Kit includes:
•18V drill •1.2Ah battery •Charger
•Six drill bits •Six driver bits •Bit
adapter •Blow molded carry case
ONLY
$39.99
Order #
22-10210
22-10212
NEW!
ONLY
$158.00
Description
18V drill kit
Replacement 18V battery
MSRP
$79.99
34.99
ONLY
$39.99
19.99
NEW!
NEW!
12 Volt 3⁄8"
Compact
Drill
Driver
Heavy-Duty XRP™ 18 Volt Hammer
Drill/Impact Driver Combo Kit
•Compact
size fits into
tight spaces •Lightweight
design (3.8 lbs.) minimizes user fatigue •3⁄8"
ratcheting chuck reduces bit slippage •Dual speed range
0~400/0~1450rpm delivers optimal performance •High
performance frameless motor delivers maximum power of
200 unit watts out •Clutch settings: 17 •LED work light
provides increased visibility in confined spaces Includes:
•Compact drill driver •One-hour charger •Two 12V
batteries •Kit box •Mfr. #DC742KA
Order #
22-10765
•Kit includes both 18V hammer drill and impact drivers,
two XRP 18V batteries, contractor bag, and a one-hour
charger •DCD950 XRP™ 18V cordless hammer drill
with patented 3-speed all-metal transmission and 1⁄2"
self-tightening chuck delivers 450 units watts out of
maximum performance, faster application speed, and
superior bit retention •DC827 18V impact driver delivers
1,330 in-lbs. of torque and 0~2,400rpm offering power and
speed to perform a wide range of fastening applications at
faster speeds •Mfr. #DCK255X
Order #
22-10740
ONLY
$359.00
18 Volt ½" XRP™ Cordless Hammerdrill
•XRP™ extended run-time batteries •Patented three-speed
all-metal transmission matches the tool to task for fastest
application speed and improved run time •Heavy-duty 1⁄2"
self-tightening chuck tightens throughout operation
providing superior bit gripping strength •LED work light
provides increased visibility •High power, high efficiency
motor delivers 450 unit watts out of max power •22 clutch
settings •Max RPM: 0~500/0~1250/0~2000 •Max BPM:
0~8500/0~21250/0~34000 Includes: •One-hour charger
•Two 18V XRP™ batteries •360° side handle •Kit box
•Mfr. #DCD950KX
Order #
22-10775
ONLY
$139.00
ONLY
$299.00
NEW!
NEW!
NEW!
20
18 Volt 1⁄2" Cordless XRP™ Li-Ion
Hammer Drill/Drill/Driver Kit
•Two included XRP™ Li-Ion extended run-time batteries
provide superior ergonomics, long run-time and battery
life •Patented 3-speed all-metal transmission •Heavy-duty
1
⁄2" self-tightening chuck •LED work light •High power,
high efficiency motor delivers 450 unit watts out of max
power •Removable 360° side handle provides additional
control •Max RPM: 0~500/0~1,250/0~2,000 •Max
BPM: 0~8,500/0~21,250/0~34,000 •Clutch settings:
22 •Tool weight: 5.25 lbs. •Includes 1-hour charger
•Mfr. #DCD970KL
18 Volt ½" Cordless XRP™ Drill/Driver Kit
•XRP™ extended run-time batteries provide long run-time
and battery life •Patented 3-speed all-metal transmission
•Heavy-duty 1⁄2" ratcheting chuck helps prevent bits
from slipping and falling out •LED work light provides
increased visibility •High power, high efficiency motor
delivers 285 unit watts out of max power •22 clutch
settings •Max RPM: 0~425/0~1,200/0~1,800 Includes:
•One hour charger •Two 12V XRP™ batteries •Kit box
•Mfr.# DCD910KX
Order #
22-10755
Order #
22-10735
Order #
22-10730
12 Volt ½" XRP Cordless Drill Driver
ONLY
$199.00
Follow us on:
ONLY
$349.00
•Two 18V XRP™ extended run-time batteries provide
long run-time and battery life •Patented 3-speed all-metal
transmission matches the tool to task for fastest application
speed and improved run time •Heavy-duty 1⁄2" ratcheting
chuck •LED work light provides increased visibility •High
power, high efficiency motor delivers 450 unit watts out
of max power •Removable 360° side handle provides
additional control •Max RPM: 0~500/0~1,250/0~2,000
•22 clutch •6.25 lbs. •Mfr. #DCD940KX
MCMelectronics.com
ONLY
$279.00
page
399
Section
20
Tools
Screw Extractors
Screw
Extractor Set
Power-Grip™ Screw
and Bolt Extractor Set
Six Piece
Extractor Kit
NEW!
•Perfect for the tool box and
will remove almost any type
of damaged fastener that
it comes across on the
job site or at home
•Kit includes: Two
Grabit damaged screw
extractors (#4~7, #8~10), two
Micro-Grabit damaged screw and bolt
extractors (#10 or 5mm, ¼" or 6mm), and two Drill-Out
damaged bolt extractors (5⁄16" or 8mm, 3⁄8" or 10mm)
•Mfr. #6280P
Order #
22-10995
ONLY
$39.99
•Reverse spiral flutes are
designed to bite down to provide
maximum gripping power •1⁄4"
hex shank fits most power tools
•High carbon steel ensures longer
life and greater durability
•Universal lobular design fits all
types of metric and SAE
3
1
fasteners from ⁄16" to ⁄3" •Includes plastic case
Order #
22-10152
ONLY
$59.99
(10 sets-up)
$29.92
•Micro-Grabit extractors quickly
remove damaged screws and
broken bolts •Two-step drill bit
and extractor in one tool
•Self-centering drill tip
means no walking or
wondering and works on
jagged and uneven breaks
•Four piece set has sizes #1, 2, 3,
and 4 •Mfr. #4507P
Seven Piece
Drill-Out Extractor Kit
Order #
22-11000
(5-9 sets)
$34.33
Four Piece Micro Grabit Kit
NEW!
NEW!
•Makes extracting bolts
and screws a fast, seamless
process •Will not lodge
itself into the bolt if the
bolt resists extraction
•Kit includes: Three
regular drill-outs (5⁄16"
3
or 8mm, ⁄8" or 10mm, ½" or 12mm)
and four micro drill-outs (#5~6 or 3mm, #8 or 8mm,
#10 or 5mm, ¼" or 6mm) •Mfr. #7017P
(1-4 sets)
$34.99
Order #
22-10975
ONLY
$25.99
NEW!
Mini X-OUT Two Piece
Screw Remover Set
Order #
22-10032
NEW!
MSRP
$14.99
ONLY
$4.99
Four Piece Drill-Out®
Broken Bolt Extractor Kit
•Bell shaped drill head helps
you stay on center •Works
on jagged, uneven and
rough breaks,no bolt
preparation required
•Self-centering drill tip
means no walking or
wondering •Deep serrated
edges biting action results in greater
torque for hard to remove bolts •Quick connect compatible
•Removes bolts ¼", 5⁄16", 3⁄8", ½", 6mm, 8mm, 10mm, and
12mm •Use with 3⁄8" variable speed reversible drill •Drills
up to grade 8 and 10.9 class bolts •Also includes a
specialty extractor for rusted, hard to remove bolts
•Mfr. #4017P
Order #
22-10980
ONLY
$39.99
•Easy to use with a 3⁄8" variable
speed reversible drill •For use
with screws #6~10 and #12~14
•Not for use with screws longer than
11⁄4" or screws with very aggressive threads •Mfr. #4022P
Order #
22-10985
Step Drill Bits
•Removes broken
screws or bolts
without damaging
hole threads
•Manufactured from chrome vanadium steel •Black oxide
finished for durability •Contains sizes: 3~6mm (1⁄8~1⁄4"),
6~8mm (1⁄4"~5⁄16"), 8~11mm (5⁄16"~7⁄16"), 11~14mm
(7⁄16"~9⁄16") and 14~19mm (9⁄16"~3⁄4")
ONLY
$7.99
NEW!
X – Out Damaged
Screw Remover
Unibit® Titanium Step Drills
20
•Titanium nitride coating for longer life •Designed to last
longer than ordinary drill bits •Self-starting tip will not
skid like standard twist drill bits •Ideal for steel, copper,
brass, aluminum, and other thin materials •Laser-marked
for easy size identification •Handy storage tube included
# of Hole
Order # Holes Sizes Increments (ea.) (2-4) (5-up)
1
1
22-6180 13
⁄8"-1⁄2"
⁄32"
$29.99 $28.79 $27.64
NEW!
•X-OUT™ is designed to
remove damaged screws.
With the power of a hand
drill, X-OUT plows into the head
of a screw and turns it out •The X-OUT
Damaged Screw Remover has the following
features and benefits: High-quality tool steel, ¼" quick
bit compatible, saves time with its fast and easy process,
reusable time and time again, no drilling required
and more.
Order #
22-10990
22-10992
22-10994
Mfr. #
3701P
3702P
3703P
For Screws
#6~8 #8~10
10~12
ONLY
$9.99
9.99
9.99
Ten Piece Master Extractor Kit
•Broken bolt and screw extractor has deep serrated
edges which makes loosening the toughest bolts and
screws a quick and easy task •Self-centering tip so there’s
no walking or wondering •Left hand cut helps loosen bolt
while drilling •The kit Includes: Three X-Out damaged
screw removers (#6-8, 8-12, 12-14), four Micro-Grabit
broken bolt extractors (#5-6 or 3mm, 8 or 4mm, 10 or
5mm, ¼" or 6mm), and three Drill-Out power extractors
(5⁄16" or 8mm, 3⁄8" or 10mm, ½" or 12mm) •Mfr. # 1007P
Order #
22-11005
ONLY
$69.99
Titanium Step Drill Set
•Drop forged, high-speed steel
with titanium coating provides
added durability •Two flute
design provides faster, smoother,
and cleaner cuts •1⁄4" quick change
hex shank Set includes: •3⁄16" to
1
⁄2" six step bit •1⁄4" to 3⁄4" nine step
bit •1⁄8" to 1⁄2" thirteen step bit
Order #
22-10094
page
400
ONLY
$14.99
Six Piece Spiral Screw Extractor and Drill Bit Set
•The fast, easy way to remove broken screws and bolts •Use with tap wrench (#22-6150)
•Set contains: 5⁄64", 7⁄64", 5⁄32" drill bits and EX-1, EX-2, and EX-3 screw extractors
Order #
22-6145
1-800-543-4330
Fax: 1-800-765-6960
(set)
$9.99
NET 30
Terms
(2 sets-up)
$9.95
Tools
Hole Saws
13 Piece Master
M3 Bi-Metal
Hole Saw Kit
Section
20
Bit Holders
•The Master’s kit
is a combination of
the popular DeWalt
plumber, electrician,
and door lock kits
•Wider M3 bi-metal
steel provides longer
life than the M2 steel
of the industry standard product •Optimized tooth design
for superior performance while cutting metal •Hardened
backing plates prevent warping thus allowing for easier
removal from the mandrel •Versatility of deep cut style
allows users to cut either wood or metal Kit includes:
•Bi-metal hole saws (3⁄4", 7⁄8", 1", 11⁄8", 13⁄8", 11⁄2", 13⁄4", 2",
21⁄8", 21⁄4", 21⁄2") •3⁄8" mandrel •1⁄4" mandrel •1⁄4" x 4" pilot
bit •Heavy-duty carry case •Mfr. #D180005
Order #
22-9294
ONLY
$119.00
16 Piece Holesaw Kit
•Cut smooth accurate holes
from 3⁄4" to 5" •Includes the
following holesaws: 3⁄4", 7⁄8",
1", 11⁄8", 11⁄4", 11⁄2', 13⁄4", 2", 21⁄2",
3", 31⁄2", 4" and 5", 1⁄4" round
arbor, 7⁄16" hex pin arbor, 1⁄4"
arbor adaptor, and 1⁄4"
pilot drill.
LIFETIME
WARRANTY
Universal Magnetic
1
⁄4" Power Bit Holder
•Powerful magnetic bit holder fits in most power tools
•1⁄4" x 74mm (2.9")
Round Hole Cutter
with Adjustable
Radius Blades
Ideal for installing
ceiling speakers,
recessed lighting, or
any project requiring
a round hole to be cut.
Cuts up to a 10" round hole in ceilings, walls, and floors.
Cuts plywood, plasterboard, and acrylic up to 1" thick.
Features include: Can be used with any variable speed
drill. Cutting radius is freely adjustable via adjusting
lever. Support base steadies the drill bit while cutting and
keeps the cut perpendicular to the surface. Transparent
cowl prevents chips from flying into eyes while cutting.
Order #
22-7385
22-7390
Order #
22-5780
Order #
22-3000
Description
Round hole cutter
Replacement blade (sold individually)
MSRP
$139.99
13.99
ONLY
$4.99
Power Extension Bit Set
A set of three extension bits
taking a 1⁄4" hexagonal
screwdriver fitting and
extending to a 1⁄4", 3⁄8", and 1⁄2"
square drives. The extension
bars are 21⁄2" in length.
Order #
22-3610
(1-4 sets)
$3.99
(5 sets-up)
$3.49
ONLY
$84.99
6.99
ONLY
$14.99
A
B
Bit Holders
•Bit holders attach in most power drills and drivers for
easy change of 1⁄4" hex bits •Made of chrome vanadium
steel •Magnetic holders
Nine Piece Bi-Metal Hole Saw Set
Bi-metal construction for strength and durability when cutting through mild steels,
bronzes, copper, brass, aluminum, wood, plywood, and plastics Set includes: •Hole
saw sizes: 5⁄8", 25⁄32", 1", 11⁄4", 11⁄2", and 2" •Mandrel adapter •7⁄16" and 3⁄8" hex arbors
•Blow molded case
Order #
22-9742
MSRP
$69.99
Fig
A
B
ONLY
$22.99
Order #
22-9962
22-9964
Description
MSRP
6" extension bit holder $2.99
23⁄8" and 29⁄16" bit holders 4.99
ONLY
$1.49
2.99
Drill Accessories
A
B
LIFETIME
WARRANTY
C
Base-Boar-Zit™
Baseboard Drill Bit
Lock-N-Load Chuck and Extensions
Fig.Order #
A 22-5900
B 22-5905
C 22-5910
Description
(ea.) (2-up)
2" Quick change chuck
$10.99 $9.70
6" Quick change extension 9.99
9.49
12" Quick change extension 9.99
9.59
Right Angle
Drill Attachment
•90° drill attachment allows
you to get into tight corners
or awkward angles •3⁄8" chuck
capacity •Includes chuck key
and blow-molded case
Order #
22-9722
Wire Bits
The wire bit is a .047" spring wire (36" long) that
can be cut (at an angle) or length to make it the smallest
“reference” bit. Its primary application is to be used as a
reference point to measure from when having to drill in a
specific wall cavity (i.e. drilling down through top plate in
wall with stapled bat insulation, up from basement in wall
with blown-in-cellulose or styrofoam insulation). The hole
created is so small that it will remain unnoticeable, even
on a ceiling. Includes pack of 10, 36" long, .047" diameter
spring wire.
MSRP
$24.99
ONLY
$14.99
Follow us on:
Order #
22-6350
ONLY
$11.99
This unique drill bit is designed to create a
curved hole from just below carpet line up into the center
of the floor plate in the wall cavity. Avoid removing the
baseboard and chiseling out a path through the wall and
the wood floor plate. The study powder coated steel frame
directs the specialized cable shaft paddle bit up along an
arc into the wall cavity so that your prevent drilling
through the opposite wall surface. This tool provides a
clean, professional installation when you need to route
wire or cable from the floor level up into the wall. Great
for slab construction, concrete floors or under-carpet wire
applications. The Base-Boar-Zit is available in two sizes:
standard 5⁄16" size or the larger 7⁄16" size for coax. Kit
includes: •Cable bit with frame •10' thin fish wire in
storage case (to fish your wire or cable through the curved
hole) •Allen wrench
Order #
22-2630
22-2632
22-2635
22-9235
MCMelectronics.com
Description
Base-Boar-Zit Kit 5⁄16"
Base-Boar-Zit Kit 7⁄16"
5
⁄16" Replacement Bit only
7
⁄16" Replacement Bit only
ONLY
$115.00
119.00
33.99
36.99
page
401
20
Quick change chuck and extensions are easy to use.
Simply select 1⁄4" grooved hex shank bit; slide back
sleeve; load bit and release sleeve. The internal hex
drive eliminates slippage. Slim diameter chuck
passes through 5⁄8" hole.
Section
20
Tools
Wood Boring Bits
Ten Piece
Wood Spade Bit Set
Bell Hanger Bits
•Metric sized wood spade
drill bit set made from high
carbon, hardened steel •All
bits 6" in length with 1⁄4" hex
shank •Includes 12"
extension with hex key
•Includes sizes: 6, 10, 13, 16,
20, 22, 25 and 32mm
Freeform Drill Bits
Unlike conventional
bell hanger bits, the
jobber bits are aircraft drills
Type A specifications for
a wider variety of drilling
applications. Features:
•Specially designed for drilling through steel plates,
as well as wood •118° point provides more gradual
breakthrough and limits the grabbing occurring when
using 135° point •Split point substantially reduces bit
“walking” •Slow design spiral improves bit self-cleaning,
eases pull back
Order #
22-7842
22-7844
22-7846
22-7850
22-7852
22-7854
22-7856
Description
3
⁄8" x 18"
3
⁄8" x 36"
3
⁄8" x 48"
1
⁄2" x 18"
1
⁄2" x 36"
1
⁄2" x 48"
1
⁄2" x 72"
ONLY
$19.99
20.99
21.99
22.99
22.99
23.99
23.99
Order #
22-9954
MSRP
$24.99
ONLY
$7.99
Speedbor
Max™ Spade Bit Set
•The Fastest Speedbor spade
bit ever •Tri-Flute design for
faster chip ejection •Cutting
spurs have three cutting edges
for added durability •Selffeeding screw tip •Fits all
1
standard ⁄4" quick change chucks •Heavy-duty case
1
•Six-piece set includes ⁄2", 5⁄8", 3⁄4", 7⁄8", 1" and 11⁄4" bits
Order #
22-10150
(1-4 sets)
$34.99
(5-9 sets)
$33.59
(10 sets-up)
$32.25
13 Piece Titanium
Wood Boring Bit Set
Bell Hangers Drill Bits
These 3⁄8" diameter bits are used in installing telephone,
CATV, burglar alarm and other cable applications. Each
bit has a fish hole in the flute to aid pulling wire. All
feature heavy back tapering for quick chip clearance.
Standard types are designed for wood, carbide tipped for
masonry, cinder block and brick. Packaged in clear PVC
tube for safe storage.
Order # Type 22-1600 Standard 22-1610 Standard Length
12"
24"
(ea.) (2-4) (5-up)
$10.99 $9.81 $8.96
20.99 20.29 19.71
Auger Bit Guide
NEW!
The folding guide tool makes it easy to
guide flexible auger bits to their intended target.
20
Order #
22-10585
ONLY
$19.99
NEW!
Rock Carbide
Drill Bit Set
•Precision ground
spur and cutting create
smoother and faster cuts •Spur point ensures accurate
positioning and quick penetration •Spade bits make crisp,
clean holes in wood •Titanium coated, drop forged, heat
treated steel construction Set includes: 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2",
9
⁄16", 5⁄8", 11⁄16", 3⁄4", 13⁄16", 7⁄8", 15⁄16", 1" spade bits
Order #
22-9122
ONLY
$8.99
Six Piece Wood Spade Bit Set
•Extra long wood spade bits are 16" in length •Heattreated to make crisp, clean holes for your wood projects
•Precision-ground spur point ensures accurate position
and fast penetration •1⁄4" hex shanks •Set includes sizes:
3
⁄8", 1⁄2", 5⁄8", 3⁄4", 7⁄8", 1"
Order #
22-7566
ONLY
$13.99
Fish Bits®
Constructed of high carbon steel, these self-feed auger
bits are permanently brazed to a flexible steel shaft. It is
designed to be inserted through small openings enabling
the user to bore through holes through studs within the
wall cavities without damaging finished walls or ceilings.
Ideal for alarm and home theater installations as well as
remodeling. Available in several diameters in 54" and
72" lengths.
Order #
21-4240
21-4241
21-4242
21-4243
21-4244
21-4245
21-4247
21-4248
Size (D) x (L) (ea.) 1
⁄4" x 54" $24.99 1
⁄4" x 72" 26.99 3
⁄8" x 72" 28.99 1
⁄2" x 54" 27.99 1
⁄2" x 72" 29.99 9
⁄16" x 54" 31.99 3
⁄4" x 54" 34.99 3
⁄4" x 72" 36.99 (2-4) (5-up)
$24.20 $23.48
26.14 25.36
28.08 27.24
27.11 26.30
29.05 28.18
30.99 30.06
33.90 32.88
35.84 34.77
MegaBore™ Drill Bits
MegaBore™ Drill Bits are designed for the installer who is pulling cable
bundles or structured wire. These tools offer superior drilling capabilities
and performance compared to large-pdiameter auger-type drill bits. These wood boring bits utilize
a self-feeding pilot screw that holds the bit firmly in place to avoid “walking” and helps draw the bit
through the wood. The MegaBore bits have multiple spurs that increase the cutting performance of
the bladed edge. Features: •Multiple bit head sizes: 11⁄4", 11⁄2", and 13⁄4" •Replaceable feed screw •Fully
reversible •Special design makes drilling fast and free of splinters •Can be used with Labor Saving
Devices’ Flexible Extension Shafts to create long shaft lengths
Order #
22-9266
22-9268
22-9270
22-9272
22-9274
22-9276
22-8008
22-8009
22-8010
22-9278
Description
11⁄4" MegaBore bit
2' shaft for MegaBore
2' flexible 1⁄4" extension ehaft
4' flexible 1⁄4" extension shaft
6' flexible 1⁄4" extension shaft
MegaBore Professional Kit (includes all of the above)
ONLY
$38.99
41.99
60.99
23.99
24.99
25.99
23.99
24.99
25.99
240.00
Masonry Bits
•Rock carbide tip
maximizes carbide
surface contact for
longer bit life •Fourflute design cleans
debris out for fast,
efficient hammer
drilling •Three flats on
shank eliminate bit slipping in chuck •Includes tough case
•Five piece set •Mfr. #DW5205
•16" length masonry drill bit set •Sizes: 5⁄16" (8mm),
13
⁄32"(10mm) and 15⁄32" (12mm)
Order #
22-10770
•Three piece set of 24" SDS masonry bits
•Tungsten carbide tipped •Ground center point
•Copper brazed •Includes 1⁄2", 5⁄8" and 1" bits
Order #
22-9956
Order #
22-9948
page
402
ONLY
$16.95
Three Piece Masonry Drill Bits
MSRP
$10.99
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$2.99
Masonry Drill Set
NET 30
Terms
MSRP
$24.99
ONLY
$9.99
Tools
Drill Bit Sets
48 Piece Drill Bit Set
Closed
•A professional sized bit set for the true project enthusiast
•19 HSS titanium coated bits: 1~10mm •Six masonry bits:
3~10mm •Six pilot tip wood drills: 3~10mm •Five
titanium spade bits: 10~22mm •Three hex shank bits:
2~4mm •Four hole saws: 32, 38, 44, 54mm •Hole saw
mandrel •Drill stoppers •Counter sink •Magnetic bit
holder •22 pieces 1" bits: Metric hex: 4~7mm; Phillips:
#1-#3; Pozi: #1-#3; square: S1-S3; hex: H3~ H6; torx:
T10~T30; •15 pieces 2" bits: Metric hex: 4~7mm;
Phillips: #1-#3; pozi: #1-#3; torx: T10~T30 •Ten nut
drivers: 4~13mm •Screw finders •Hex key
Order #
22-9942
MSRP
$109.99
ONLY
$49.99
•A wide variety of drill and driver bits for most drilling
and fastening needs Includes: 42 HSS twist drills set:
1~10mm •51 titanium coated high speed drill bit: 1~8mm
•Three hex chuck pilot bits: 2~4mm •Eleven masonry drill
bits: 3~10mm •Three 12" masonry drill bits: 8, 10, 12mm
•Eight pilot point wood bits: 4~10mm •Six 6" wood spade
bits: 10~32mm •Four 12" wood spade bits: 8~4mm •Four
hole saws with hole saw adapter: 32~54mm •Hole saw
adapter •Three drill stoppers: 3, 5, 8mm •20 screwdriver
2" bits: Torx 10~45; pozi #1~#3; phillips #1~#3; slotted
3~8mm •27 screwdriver 1" bits: Torx 10~45; pozi #1-#3;
phillips #1-#3; hex 3~5mm; square #1~#3; slotted 3~8mm
•Ten nut drivers: 5~13mm •Four nail punches: 1⁄32", 2⁄32", 3⁄32"
and 4⁄32" •Magnetic bit holder •Screw finders •Counter sink
•Drill gauge
Order #
22-9944
MSRP
$89.99
ONLY
$39.99
•Twenty-piece set
perfect for small
electronics and
hobbyist use •Titanium coated bits •Works best with
rotary tools or drills designed for small and micro bits
•Includes sizes: 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65,
0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 and
1.6mm •Case with bit selector
Order #
22-9952
MSRP
$12.99
ONLY
$4.99
Follow us on:
Order #
22-9940
MSRP
$24.99
20
NEW!
65 Piece
Drill Bit Set
•Durable MAC
container filled
with a variety
of drilling and
fastening bits
and accessories
•Includes fastening bits, drive guide, pilot point drill
bits, impact-ready deep sockets, spade bits, nut setters,
magnetic tray, and a quick-load chuck •Mfr. #DW2583
Order #
22-10745
ONLY
$54.95
ONLY
$9.99
101 Piece
Drill Bit Set
An extended
range bit set
for your every
project.
Includes: •19
HSS titanium
bits: 1~10mm
•Six masonry
bits: 3~10mm
•Six pilot point
wood bits:
3~10mm •Five
titanium wood
spades: 10~22mm •Three hex shank bits: 2, 3, 4mm •Four
hole saws: 32, 38, 44, 54mm •Hole saw mandrel •Four
drill stoppers •Counter sink •Magnetic bit holder •22
pieces 1⁄4" hex 1" bits: Metric hex: 4~7mm; Phillips: #1-#3;
Pozi: #1-#3; square: S1~S3; hex: H3~H6; torx: T10~T30
•15 pieces 1⁄4" hex 2" bits: hex: 4~7mm; Phillips: #1~#3
•Pozi: #1~#3 •Star: T10~T30 •Nut drivers: 4~13mm
•Three screw finders •Hex key
Order #
22-9938
MSRP
$49.99
ONLY
$19.99
Qty.
2
1
7⁄64"
1
3⁄32"
1
Size 1⁄8"
9⁄64"
5⁄32"
3⁄16"
Order #
22-8195
Qty.
2
1
1
1
(1-4 sets)
$20.95
Size 7⁄32"
1⁄4"
5⁄16"
3⁄8" Qty.
1
1
1
1
(5 sets – up)
$19.95
•Titanium nitride coated alloy steel for
long lasting durability •Advanced split
point for simple drilling •Sizes
1~10mm •Includes case
•18 piece drill bit set for wood, metal,
and masonry drilling Includes: •Twist
bits: 3, 4, 5, 6, 8 and 10mm •Wood
working pilot point bits: 3, 4, 5, 6, 8
and 10mm •Masonry bits: 3, 4, 5, 6, 8
and 10mm
MSRP
$19.99
Size 1⁄16"
5⁄64"
19 Piece Titanium Drill Bit Set
Drill Bit Set
Order #
22-9936
Drill Bit Set
•Pilot point tip starts on contact for clean, accurate holes
and reduces lock-up on breakthrough •No-Spin shank
eliminates the frustration of bit spinning in the chuck
•Tapered web provides greater durability to reduce
breaking •Size markings are located above the shank to
prevent wearing away Set contains:
Order #
22-9728
MSRP
$37.50
ONLY
$16.99
ONLY
$5.49
20
Micro HSS
Drill Bit Set
A collection of the most
commonly used bits for
use with any power drill
or driver. Includes: •13
HSS Titanium coated bits:
1.5, 2, 2.5, 3, 3.2, 3.5, 4,
4.5, 4.8, 5, 5.5, 6, 6.5mm
•Four masonry bits: 3, 5,
6, 10mm •Five wood
spades: 10, 13, 16, 19,
22mm •Four hole
saws: 32, 38, 45,
54mm •Hole saw
adapter •Eight
50mm CRV bits
•Four 38mm CRV bits •Seven nut drivers: 5, 6, 7, 8, 9, 10,
11mm •Two screw finders •Blow-molded case
Section
115 Piece Titanium Drill Bit Set
•Drill bits constructed of high speed steel, titanium
coated •Precision ground flukes cut quickly and cleanly
•Titanium coating makes bits last up to six times longer
•Ideal for drilling steel, aluminum, wood, plastic, etc.
•Bits can be resharpened Set includes: •29 SAE sizes
from 1⁄16 to 1⁄2 by 64ths •26 letter sizes A to Z •60
numbered wire gauge sizes: 1 to 60 •Storage case
Order #
22-8370
(set)
$49.99
(2 sets-up)
$47.95
MCMelectronics.com
page
403
Section
20
Tools
Cases
Zipper Bag
Rolling Workshop™ XL
A high-quality, customizable
toolbox complete with
heavy-duty, 6" rubber
wheels and 39" telescopic
handle for the safe storage
and transportation of hand
and power tools. Features:
•Lift-off toolbox with
sawhorse groove and rule
•Three spacious drawers
to store hand tools and
fasteners, etc. •Bungee
cords to hold saws and
levels •Circular saw blade
storage •Dimensions: 321⁄2" (H) x 191⁄4" (W) x 113⁄4" (D)
Order #
22-8310
(ea.)
$89.99
(2-up)
$85.49
Order #
22-9534
22-9536
Description
7" x 121⁄2" 12" x 17"
(1-2)
$8.99
25.99
(3-5)
$8.49
25.15
(6-up)
$7.99
23.49
•This multi-level tool rack allows you to store twice the
tools in half the space •Tough polypropylene construction
prevents rack from bending under a full load of tools
•Mounts easily on wall •Holds up to 96 separate tools
•Red •Dimensions: 241⁄8" (W) x 23⁄4" (H) x 6" (D) •Tools
not included •Made in USA
(25-49)
$5.65
A
B
Canvas
Zipper Bags
•No. 10 canvas bags with strong brass zipper •Convenient
storage for pliers, wrenches and other tools and parts.
•121⁄2'' x 7''
Description
ONLY
Four-pack, color variety $43.99
Single, white
10.99
(50-up)
$5.32
•Made of lightweight, sturdy 12 oz.
canvas with a drawstring closure
•Ten compartments for storing screws, connectors, and
other small parts •11" diameter •6" deep •Olive green
•Mfr. #5151
Order #
22-10529
ONLY
$49.99
•Durable tool bag
features 30 various
sized pockets to
carry almost any tool
•Constructed of nylon
•Open top for easy
access and triple
bottom construction
for durability •Tools
not included
(ea.)
$11.99
(2-up)
$10.95
20
Order #
22-8608
(10-up)
$30.75
(ea.)
$29.99
(2-up)
$28.50
Six Drawer Tool/Storage Chest
Professional unit designed to organize, store, and protect
precision tools, hardware, and small parts. Drawers are
easily removed so they can be placed where the parts are
most needed. Features a self-storing door panel providing
all-weather protection for the contents of the box. Also
has adjustable compartment sizes to customize the case
to your requirements. Dimensions: 161⁄2" (W) x
103⁄8" (L) x 15" (D)
•Magnetic wrist
band features strong
neodymium magnets
and is rated to hold up to six pounds •Saves time by
keeping steel parts close at hand •Ends the frustration
of losing small fasteners and parts •Also holds tools
•Comfortable to wear all day •Waterproof •Adjustable
band fits virtually any wrist size
Order #
21-7360
Order #
22-9096
ONLY
$93.99
1-800-543-4330
Fax: 1-800-765-6960
Canvas
Tool Bag
Handy 15" size
holds the right
amount of tools for
just about any job
and is still small
enough to fit in the
trunk. Made with
heavy duty canvas
and hard bottom.
Features heavy-duty zippered top with a snap down flap.
1
Long lasting web handles. 15" x 6" x 8 ⁄2".
Order #
22-2445
ONLY
$9.89
Magnetic Parts Tray
•Keep your wrenches,
sockets, and parts safe and
close at hand •Made of heavy
duty stainless steel •Prevents
items from rolling or sliding •Locks on to any ferrous
surface and work at any angle •Dimensions: 91⁄2" (H) x
10" (L) x 11⁄4" (D)
Order #
22-5820
Super
Wrist Magnet
404
(5-9)
$32.50
•This high quality
tool tote case is
actually two zipper
bags in one •Can be
used as two separate
bags or zipped
together as one large
tool case •The first
case has two large
pouches perfect for
storing documents,
paperwork, or larger
items. The second
bag contains 20
pockets for tools. This sturdy and lightweight case
measures approximately 16" (W) x 12" (H) x 21⁄2" (D).
Order #
22-3880
Portable Tool Bag
page
(1-4)
$34.99
Ten Compartment Parts Bag
24" Tool Rack
(10-24)
$6.49
Order #
22-10135
2-in-1 Zipper Bag
NEW!
(1-9)
$7.49
•Double wall construction
•Open profile for easy access
to vertical storage •Includes
plastic small parts organizer
•Handle and shoulder straps
•Dimensions: 12" (W) x
9" (L) x 15" (H) •Note: Tools
not included
NEW!
Fig. Order #
Mfr. #
A
22-10525 5140
B
22-10527 5139
Order #
21-1950
Electrician’s Tote
•Made of Cordura®
high-performance ballistic
nylon •Heavy-duty zipper
•Convenient storage for
pliers, screwdrivers, spare parts, and
other tools •Larger size (#22-9536) is perfect for
transporting manuals, invoices, plans, or other paper work.
ONLY
$15.99
NET 30
Terms
ONLY
$14.49
Tools
Cases
NEW!
Section
20
Deluxe
Polypropylene
Tool Case
•Black, chemical
resistant with extruded
aluminum frame, golf grip
handle, cast chrome key
locks and full-length piano
hinge •Interior has two molded
pallets and deluxe literature pocket •Inside
dimensions: 18" (L) x 13" (W) x 6" (D)
Order #
22-8795
Mfr. #
800T-CB
#22-10475
#22-10477
•Developed by Sentry, the patented security window
shows if luggage has been opened for inspection •1,000
customizable combinations •TSA recognized and accepted
•Different sizes for different sized eyelets •Black
ONLY
$149.00
Order #
22-10475
22-10477
22-10479
Mfr. #
TSA6430PSB
TSA6435PSB
TSA7400PSB
Description
Small heavy-duty loop
Large heavy-duty loop
Narrow loop
Rugged
Micro Cases
Mfr. #
1010
1020
1040
Interior Dimensions
4.37" x 2.87" x 1.68"
5.31" x 3.56" x 1.68"
6.50" x 3.87" x 1.75"
ONLY
$11.99
12.99
9.99
NEW!
•Water resistant,
crushproof, and dust
proof protection for
your delicate electronics
and tools •High quality latch
•Lanyard •Molded rubber liner
doubles as water-tight seal and shock absorber •Automatic
pressure release Gore-Tex® membrane for high altitudes
•Unconditional lifetime guarantee through manufacture
Order #
22-9860
22-9862
22-9864
#22-10479
SearchAlert® TSA Locks
Peli Desiccant
•Peli Desiccant silica
gel “drinks” dampness
and prevents condensation
from trapped air when
equipment cases are opened in damp,
high humidity climates •Fits all cases
•Reusable •Colored center indicates when to recharge
in any oven •2" x 4"
ONLY
$16.99
19.99
23.99
Order #
22-10495
Master Technician Cases
For additional capacity, the larger 669ZT series “Master
Technician” carrying case contains 47 sewn tool pockets
and a meter pouch inside, as well as two meter pouches
and a document pocket on the outside. Constructed of
heavy-duty nylon with an industrial strength zipper for
durability. This carrying case comes complete with
adjustable and removable shoulder strap. Also available
in the following selection of colors (see chart below).
Shoulder strap included. Outside dimensions are
151⁄2" (L) x 11" (W) x 2" (D).
Order #
22-4380
22-4385
22-4390
22-4395
Mfr. #
669ZT
669ZTBURG
669ZTGREEN
669ZTBLU
Color
Black
Burgundy
Green
Blue
ONLY
$114.00
109.00
109.00
115.00
ONLY
$14.99
Mechanic’s Tool Bag
Blow-Molded Cases
Platt’s low cost solution to “Make-Your-Own” case needs. These cases are manufactured from
prime, high-density polyethylene, with double wall construction. The textured exterior resists
dents, cracking, and scuffs. The shells are unaffected by extreme temperatures. The hardware
features mechanical latches that are field replaceable, and a mechanical hinge system that
is made to last. All cases are an electrical insulator and are impervious to chemical attack.
These cases are ideal for instruments and test equipment.
Order #
Mfr. #
22-4310
107
22-4315
207
22-4320
307
22-9648
403
22-4325
407
22-4330
507
22-4335
607
22-4340
707
22-9304
902
Inside Dimensions
(L) x (W) x (D)
71⁄2"x 5" x 21⁄8"
91⁄2" x 6" x 25⁄8"
11" x 7" x 33⁄8"
123⁄8" x 77⁄8" x 4"
121⁄2" x 9" x 51⁄8"
137⁄8" x 97⁄8" x 4"
16" x 11" x 27⁄8"
173⁄4" x 123⁄4' x 71⁄8"
253⁄4" x 141⁄4" x 65⁄8"
Outside Dimensions
(L) x (W) x (D)
81⁄2" x 6" x 21⁄2"
101⁄2" x 7" x 3"
12" x 8" x 33⁄4"
131⁄2" x 9" x 43⁄8" 131⁄2" x 10" x 51⁄2" 15" x 11" x 43⁄8"
17" x 12" x 31⁄4"
19" x 14" x 73⁄4"
271⁄2" x 16" x 7"
ONLY
$14.99
17.99
29.99
32.99
35.99
44.99
44.49
82.99
132.00
This handy “Mechanic’s Tool Bag” is similar to the GI
tool bag used for decades by the U.S. Military. Platt’s
water-repellant fabric makes it much more durable.
With eight sewn-in pockets on the inside and two divided
snap pouches on the outside, this compact utility bag
will keep your smaller tools and parts organized. Outside
dimensions are 12" (L) x 6" (W) x 61⁄2" (D). Available
colors listed below.
Order #
22-4405
22-4410
22-4415
22-4420
Mfr. #
MTB-BLU
MTB-GREEN
MTB
MTB-BURG
Color
Blue
Green
Black
Burgundy
ONLY
$24.99
24.99
24.99
24.99
Order #
22-7870
22-7872
22-7880
22-7882
22-7884
22-7886
Interior Dimensions (L x W x D)
81⁄2" x 6" x 33⁄4"
91⁄2" x 71⁄2" x 41⁄2"
18" x 127⁄8" x 63⁄4"
19" x 14" x 73⁄4"
22" x 17" x 8"
311⁄2" x 203⁄4" x 111⁄2" (Rollaway model)
Follow us on:
ONLY
$34.99
49.99
156.54
169.00
199.00
299.00
20
Airtight and Watertight Protector Cases
The World’s Toughest, Watertight Equipment Protector Case! Watertight and airtight
to 30' for the ultimate in protection. Constructed of lightweight space age structural resin
with a neoprene O-ring seal and exclusive purge valve. These cases provide the ultimate
protection for sensitive and valuable equipment. Supplied complete with pre-scored
pick-n-pluck foam in bottom and convoluted foam in lid. Also includes locking flanges,
massive multiple latches for absolute security and a comfortable molded fold down
handle. A wheeled model (#22-7886) is also available featuring quiet 2" urethane wheels
and the same airtight/watertight features. Color: Black. Unconditional lifetime guarantee
of excellence. Made in USA..
42 Pocket Sideglide™
Roller Bag
•32 pockets inside and 10 outside organize tools and
accessories •131⁄2" x 9" multi-compartment plastic tray
organizes small parts •Telescoping handle extends for fast
transport on large, easy-roll wheels •Made of 600 denier
fabric, reinforced interior bottom panels, and heavy-duty
stitching and bar tacking at stress points •18" (L) x
10" (W) x 14" (H) •Tools not included
Order #
22-7996
MCMelectronics.com
(ea.)
$99.99
(2-4)
$99.47
(5-up)
$91.98
page
405
Section
20
Tools
Cases
LIFETIME
WARRANTY
LIFETIME
WARRANTY
Jet
Tool Case
XS-Cases
NEW!
NEW!
•Very sturdy,
stackable •Dustproof,
airtight, watertight •Case shells
made of ultra high-impact ABS
plastic •Air pressure compensation
valve •Padlock eyelets •Carrying
strap included •Lifetime manufacturer’s guarantee •Inside
dimensions: 163⁄4" (W) x 133⁄4" (H) x 63⁄5" (D) •Net weight:
12.57 lbs. •Mfr. #114.17
Order #
22-10855
ONLY
$129.00
NEW!
Outdoor
Cases
•German
engineered
equipment cases designed to withstand
the harshest environments •Watertight •Dustproof
•Airtight •Shock resistant •Virtually indestructible
•Chemical resistant and corrosion proof •Eyes for
padlocks •Air pressure compensation valve •Sturdy
handles •Removable pre-cut, cubed “pluck” foam insert
in the bottom for customization •For temperatures ranging
from - 40°C~80°C •Made from ultra-high-impact ABS
plastic •Unlimited lifetime guarantee •Push button
latches on #22-10444 and 22-10446
Order #
Mfr. #
22-10440 1.2809/B/SI
22-10442 1.3515/B/SI
22-10444 1.4016/B/SI
22-10446 1.4618/B/SI
Inner Dimensions
(mm)
250 x 180 x 80
365 x 265 x 155
410 x 325 x 165
420 x 300 x 170
Jumbo Tool Case
•Lifetime manufacturer’s guaranty •Case shells made of
Ultra High-Impact ABS Plastic •Air pressure compensation
valve •Seven locks •Two inline-rollers •Three handles for
multiple carrying methods •Stackable for easier storage
•Dustproof, airtight, watertight •Inside dimensions: 21" x
141⁄4" x 73⁄4" •Net weight: 21.61 lbs. •Unlimited lifetime
guarantee •Mfr. #114.19
Order #
22-10860
ONLY
$235.00
20
NEW!
•Case shells made of HDPE
material (flight case) •Robust
aluminum frame with
protection for the
sharp edges •Two
clip locks •One
B&W PROFI
code combination
lock •B&W
Convenience
handle for multiple
carrying methods
NEW!
•Hinge cover •Inside
dimensions: 183⁄4" x 141⁄4" x
73⁄4" •Net weight: 13.23 lbs. •Mfr. #115.03P
Order #
22-10865
Order #
22-10850
22-10852
22-10854
Color
Black
White
Orange
Mfr. #
2.1000/B
2.1010/W
2.1020/O
ONLY
$13.99
13.99
13.99
NEW!
ONLY
$24.99
79.99
99.99
99.99
Shark
Tool
Case
LIFETIME
WARRANTY
•The XS-Case
is designed
to protect
digital
cameras,
PDAs, mobile
phones and MP3 players •Protects the
NEW!
device in all climate situations •The rugged
ABS XS-Case is break-proof, shock-resistant,
water-resistant and dust-proof •The case is equipped
with an essential pressure release valve •One-handed
snap closure makes the case easy for all users •Can be
worn as a belt pouch or carried over your shoulder with
the adjustable strap
Vol™
Tool Case
•Features
tool-holding
MOLDULLIFETIME
sections™ with rubber
WARRANTY
fingers that hold any size and
shape tool •Removable tool pallets in the
lid with three MODUL-sections™ for tools up to 21mm
thick on both the front and back •Removable cover board
for the floor shell with additional 3 MODUL-sections for
tools up to 28mm thick •ABS shell with aluminum frame
•Two lockable clips •PROFIcode™ combination lock
•Document holder in lid •I.D.: 480 x 370 x 180mm
•Mfr. #114.03/M
Order #
22-10430
ONLY
$149.00
NEW!
ONLY
$199.00
Rhino
Tool
Case
Closed
•Removable tool pallets with 22 and 15 pockets
•Customizable base with dividers •Document partition
in inside lid •Easy access to all compartments and
palettes at any time •Shell made of dent proof ABS
material •Robust aluminum frame with protection
from sharp edges •Key locks on clips •PROFIcode™
combination lock •CONVENIENCE™ handle with return
spring •Self closing hinges also hold lid securely open
•I.D.: 455 x 345 x 160mm •Mfr. #114.02P
•Mobile case with userfriendly telescopic handle
•Two free running rollers
•Case shells made of
HDPE material
(flight case)
•Robust
aluminum frame
with protection for
the sharp edges •Two
clip locks •One B&W
NEW!
PROFI code combination
lock •B&W convenience handle
•Hinge cover •Inside dimensions: 20" x 15.35" x 9" •Net
weight: 17.42 lbs. •Mfr. #115.04P
•Mobile case with
telescopic handle
and two free-running
LIFETIME
rollers •Features tool-holding
WARRANTY
MOLDUL-sections™ with rubber fingers
that hold any size and shape tool •Removable tool pallets
in the lid with three MODUL-sections™ for tools up
to 18mm thick on both the front and back •Removable
cover board for the floor shell with additional 3
MODUL-sections for tools up to 21mm thick •ABS shell
with aluminum frame •Two lockable clips •PROFIcode™
combination lock •Document holder in lid •I.D.:
485 x 350 x 195mm •Mfr. #114.04/M
Order #
22-10425
Order #
22-10870
Order #
22-10435
Easy™ Tool Case
page
406
LIFETIME
WARRANTY
ONLY
$129.00
1-800-543-4330
Fax: 1-800-765-6960
ONLY
$282.00
Run™ Tool Case
NET 30
Terms
ONLY
$199.00
Tools
Cases
Water and
air tight
•A 32" portable, multi-purpose
workshop that allows plenty of
organization for tools and parts
•Three detachable sections •63⁄4"
deep toolbox includes parts tray
and sawhorse groove •Removable
center drawers include separated
trays for storing fasteners, driver
bits, and other small parts •6"
rubber wheels •Telescopic handle
for easy storage •Dimensions:
12" (D) x 19" (W) x 32" (H)
MSRP
$99.99
Heavy-Duty Aluminum Tool/Equipment Case
ONLY
$49.99
Order #
22-8125
•A heavy-duty 26" rolling
workshop for maximum
storage and easy transportation
of tools and materials
•Extendable and removable pull
handle •Attractive yellow metal
exterior for years of durability
•Removable upper toolbox for
frequently used tools •33⁄4" deep
pullout drawer •Side bungee
cords for external storage
•Large tilt-out bin for power
tools or cabling •Saw horse
groove in lid for cutting pipes or
lumber •Soft rubber grips •Cord wrap on back
of unit •Dimensions: 20" (W) x 10" (D) x 26" (H)
MSRP
$169.99
MSRP
$99.99
ONLY
$39.99
•Made of lightweight
durable aluminum
•One tool holder
with adjustable
compartments
easily carries hand tools,
small soldering equipment, hand held test equipment,
and more •Color: Black •Dimensions: 19" x 14" x 6"
ONLY
$89.99
Order #
22-8120
MSRP
$99.99
ONLY
$39.99
Pluck
foam
inserts
•Provides
maximum
storage and easy
transportation of
tools •4" rubber wheels
•Main compartment
suitable for power tools
and large equipment •Two
internal tote trays with removable dividers for easy
organization of tools and parts •Lift off lid with internal
storage trays •Telescoping metal handle •Sawhorse
grooves in lid
•Make your own tool kit with
this deluxe tool case with
two removable pallets
•Comes with inside
pouch for extra
storage and
outside pouch for
storing documents
•Includes shoulder
strap •15" (W) x
12" (H) x 3" (D)
Order #
22-8840
#22-10460
#22-10465
LIFETIME
WARRANTY
Weatherproof
Equipment Cases
•Protect your expensive
tools, equipment, and
electronics with
customizable cases that
#22-10470
will withstand any
environment •Push button
latches open and secure with ease (featured on models
#22-10460, 22-10465, 22-10470) •Customizable cubed
“pluck” foam insert •Water-tight, air-tight, and nearly
indestructible •Swivel handles •Stackable •Pressure purge
valve •Holes for padlocks •Removable shoulder carry
strap •Made of ultra high-impact ABS plastic
Deluxe Canvas Tool Case
MSRP
$99.99
#22-10455
Heavy-Duty
Aluminum Tool Case
Rolling
Tool Chest
Order #
22-9898
#22-10450
Heavy-duty case is made of lightweight aluminum and
designed to take rough field use. Includes one tool pallet,
egg carton foam lid, and 21⁄2" thick precut foam bottom.
Ideal for carrying fragile instruments, test equipment with
accessories and small hand tools. Attractive black finish
holds up after years of use. Measures approximately
19" x 14" x 6".
Metal Rolling Workshop
Order #
22-9896
20
NEW!
Plastic Rolling Workshop
Order #
22-9894
Section
Order #
22-10450
22-10455
22-10460
22-10465
22-10470
MSRP
$24.99
(ea.)
$14.99
Inner Dimensions
97⁄8" x 71⁄8" x 31⁄8"
97⁄8" x 71⁄8" x 51⁄2"
151⁄8" x 107⁄16" x 57⁄8"
161⁄4" x 113⁄16" x 63⁄4"
187⁄8" x 141⁄8" x 81⁄4"
MSRP
$39.95
59.95
99.95
159.00
199.00
ONLY
$21.99
34.99
69.99
84.99
129.00
(2-up)
$13.75
ONLY
$49.99
20
Three Piece
Toolbox Set
•Sturdy plastic
nesting toolboxes
•Larger boxes have
two hinged sorting
compartments
with transparent
lids •Black body
and handle •Double
clasp •Keeps tools
safe and secure •Includes
sizes (lengths): 18", 16", 12"
6" Magnetic
Parts Tray
Stainless
steel parts
tray holds small
tools and parts in
place for easy retrieval.
•Strong magnet with rubber
protective cover sticks to any metal surface while
holding your metal parts •Diameter: 6" •Depth 11⁄8"
Order #
22-9718
MSRP
$7.99
ONLY
$4.99
Follow us on:
Order #
22-9890
22" Stainless
Steel Tool Box
•Heavy-duty tool box
•Internal removable tote
tray •Soft grip carrying
handle provides extra
comfort •Integral sawhorse groove •Heavyduty metal latches •Padlock eyes for extra security
•Dimensions: 107⁄8" (H) x 221⁄2" (W) x 11" (D)
MSRP
$37.99
ONLY
$19.99
Order #
22-9892
MCMelectronics.com
MSRP
$59.99
ONLY
$34.99
page
407

Tools - MCM Electronics

Transcription

Similar documents

EE 1106 - The University of Texas at Arlington

Johnny Tremain by Esther Forbes Objectives

Full Bio

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

Master Toolkit Model ITK-MAS-2612 includes all of following Tools

PRICE TOTAL $ FIBA Shot Clock *pair

Gravlax Kit Guide and Information

LGOBO SALE SHEET

The wardrobe malfunction — it`s a Hollywood moment that

MEMBERS - Wire Fabricators Association