GrindTec-Forum, Hall 5

GrindTec-Forum, Hall 5
Wednesday, 16th March 2016
14:00 hrs Opening
Klaus Werner, Dr. rer. nat., Verband Deutscher
Schleifmittelwerke e.V.
14:10 hrs Potential of application-related grinding
tool design
Nikolas Schröer, Dipl.-Ing., Institut für Werkzeugmaschinen und Fabrikbetrieb / TU Berlin
14:45 hrs New technology developments on
generating grinding
Andreas Mehr, Dr.-Ing.,
Liebherr-Verzahntechnik GmbH
15:20 hrs Principle and chances of wire electrical discharge
dressing-technology „STUDER-WireDress®“
Frank Fiebelkorn, Dr.-Ing., Fritz Studer AG,
15:55 hrs Dry grinding by structured wheels
Nima Jandaghi, Dipl.-Ing. (FH), Kompetenzzentrum für Schleiftechnologie und Feinstbearbeitung / Hochschule Furtwangen
16:30 hrs Vitrified-bonded superabrasives - State of the
art and current developments
Gunter Steckel, Dipl.-Ing., Tyrolit - Schleifmittelwerke Swarovski K.G.
Thursday, 17th March 2016
10:00 hrs Weiterbildung zur Industriefachkraft für
Schneidwerkzeugtechnik
Patrick Wachendorfer, Ausbildungsleiter,
Horn-Akademie Tübingen
[email protected]
10:30 hrs Berufs- und Meisterausbildung zum Schneidwerkzeugmechaniker - Eine Information für Unternehmen
Kurt Haßfurter, OStD.,
Jakob-Preh-Schule, Staatliche Berufsschule Bad
Neustadt, [email protected]
Stand 02.03.2016, Änderungen vorbehalten / As per 2016/03/02, Subject to possible modifications
11:00 hrs Aus- und Weiterbildungsangebote des FDPW
seiner Fachakademie
FDPW, Fachverband Deutscher Präzisions-Werkzeugschleifer FDPW, [email protected]
11:30 hrs Approach for the systematic analysis of the material
behavior of cemented carbides (WC-Co) in grinding
Christian Wirtz, M.Sc. M.Sc.,
WZL der RWTH Aachen,
[email protected]
12:00 hrs Surface Solutions for high temperature-stable
material
JDetlev Bross, Oerlikon Balzers Coating Germany GmbH, Bingen,
[email protected]
12:30 hrs Potentialities for simulation assisted dimensioning
of chip breaker on profile tools
Tobias Jakobi, B.Eng.,
iWFT der Rheinischen FH Köln,
[email protected]
13:00 hrs Innovative Fully Synthetic Metalworking Oils
Wolfgang Dierks,
Chemische Werke Kluthe GmbH,
[email protected]
13:30 hrs Superfinishing for a Greener Planet & Healthier,
Active Lifestyle
Irving Hale,
Darmann Abrasive Products, Inc., USA,
[email protected]
14:00 hrs New process monitoring strategies,
acoustic emission sensors and controllers for
grinding processes optimization
Andreas Wilhelm, Director, International Sales,
SBS – Schmitt Industries, Inc.,
[email protected]
Veranstalter
Organizer
14:30 hrs New generation superfiltration for grinding:
self-adaptive filtration systems for
superior performance and energy efficiency
Matia Adani, Geschäftsführer / Managing
Director, Comat srl, Italy
[email protected]
15:00 hrs Material characterisazion for metal cutting
simulation
Benedikt Thimm, M.Eng.,
iWFT der Rheinischen FH Köln,
[email protected]
15:30 hrs Edge preparation, what you need to know
about wet blasting
Ryan Ashworth, Vapormatt Ltd, UK,
[email protected]
16:00 hrs Unguided vibratory finishing – Improved
understanding by means of new
measurement systems
Maximilian Lachenmaier, M. Sc.,
WZL der RWTH Aachen,
[email protected]
16:30 hrs New developments in grinding technology
Taghi Tawakoli, Prof. Dr.-Ing.,
STZ Advanced Engineering
Technology, Freiburg, [email protected]
17:00 hrs Hot for grinding machines?
We go for fire protection!
Holger Nolte, Strausak AG / Siemens AG,
[email protected]
Fachlicher Träger
Sponsor
GrindTec-Forum, Hall 5
Friday, 18st March 2016
10:00 hrs Towards the modelling of high speed internal
traverse grinding
Sebastian Schumann, Dipl.-Ing.,
Institut für Spanende Fertigung Technische
Universität Dortmund, [email protected]
10:30 hrs Effective air cleaning processes for wet
grinding of metal
Heinz Kuppinger, Dr.,
Fa. AFS Airfilter Systeme GmbH, Untermünkheim,
[email protected]
11:00 hrs Facing the future complexity of precision finishing
Taghi Tawakoli, Prof. Dr.-Ing.,
KWH Mirka Ltd, Finland,
[email protected]
11:30 hrs Reducing of vibrations on machine tools and
base plates by the use of high damping
machine beds and machine parts
Sascha Döhler, Dipl.-Ing.,
Framag Industrieanlagenbau GmbH,
Frankenburg /A, [email protected]
12:00 hrs PräziGen – Additive manufacturing of
application optimized cemented
carbide precision tools
Tobias Schwanekamp, Dipl.-Ing.,
iWFT der Rheinischen FH Köln,
[email protected]
12:30 hrs Buderus Xgrind - shop floor machine for
hard-fine machining
Phillip Utsch, Dr., Buderus Schleiftechnik, Asslar,
[email protected]
13:00 hrs Pre- and post-treatment of cemented carbide
twist drills using wet abrasive jet blasting
Mark Wolf, Dipl.-Wirt.-Ing.,
Institut für Spanende Fertigung
Technische Universität Dortmund, [email protected]
13:30 hrs Effective coolant filtration in gear grinding
Stefan Gernsheimer, Dipl.-Ing. (FH),
Georg Oest Mineralölwerk GmbH & Co.KG,
[email protected]
Stand 02.03.2016, Änderungen vorbehalten / As per 2016/03/02, Subject to possible modifications
14:00 hrs Precision grinding with coarse diamond grains
Daniel Berger,
Labor für Mikrozerspanung (LFM) Univ. Bremen,
[email protected]
14:30 hrs Treatment of grinding sludge – efficient and
economic
Tobias Lanner, Dipl.-Ing. (FH),
Lanner Anlagenbau GmbH,
[email protected]
15:00 hrs The PowerGrind productivity boost
Stephan Scholze, Dr.,
Agathon AG Maschinenfabrik, Bellach/CH
[email protected]
15:30 hrs Cemented Carbides: A sensitive high
performance material
Jürgen Schmidt, Dr.,
EXTRAMET AG, Plaffeien/CH,
[email protected]
16:00 hrs Microstructuring using ultrashort pulse laser to
optimize the grinding process
Jürgen Struß, Dipl.-Ing. (FH),
Hochschule Furtwangen, KSF,
[email protected]
16:30 hrs Technological requirements for manufacturing
of modern PCD tools
Siegfried Hegele,
Walter Maschinenbau GmbH, Tübingen,
[email protected]
Saturday, 19nd March 2016
10:00 hrs Innovative Use of Diamond Tools for Submicron
Precision Dressing of Conventional Grinding Wheels
Peter Feuchter, Mössner GmbH, Pforzheim,
[email protected]
10:30 hrs Filtration of carbide and HSS chips - especially
in grinding processes
Gerd J. Hasse, Geschäftsführer / Managing
Director, Transor Filter GmbH, Usingen,
[email protected]
Veranstalter
Organizer
11:00 hrs Dressing of High-Speed Grinding Wheels
Janis Thiermann, Dipl.-Ing.,
WZL der RWTH Aachen,
[email protected]
11:30 hrs Precision correction of the grinding process by
networking the design department with grinding
and in-process measuring machines
Christopher Morcom, M.A., M.B.A.,
Tool MT GmbH, Giessen,
[email protected]
12:00 hrs Innovative machine conceps and solutions for
not commonplace tasks
Gerhard Krautmann,
DONAUTEC GmbH & Co. KG, Ulm,
[email protected]
12:30 hrs Challenge flat surface
Thomas Harter,
Supfina Grieshaber GmbH & Co.KG,
[email protected]
13:00 hrs Effective air cleaning processes for wet
grinding of metal
Heinz Kuppinger, Dr.,
Fa. AFS Airfilter Systeme GmbH,
Untermünkheim, [email protected]
13:30 Uhr Berufs- und Meisterausbildung zum
Schneidwerkzeugmechaniker - Eine Information
für Unternehmen
Kurt Haßfurter, OStD.,
Jakob-Preh-Schule, Staatliche Berufsschule
Bad Neustadt, [email protected]
14:00 hrs 3D simulation allows optimal choice of machining
feed rate in tool grinding
Jörg Federer, Dipl. Ing. ETH,
NUM AG, Treufen CH,
[email protected]
Fachlicher Träger
Sponsor