TEST REPORT Stihl FS 560 C-EM

Transcription

TEST REPORT Stihl FS 560 C-EM
TEST REPORT
Stihl FS 560 C-EM
Test No.: 6366
OWNER OF THE TEST REPORT:
Manufacturer and applicant:
Andreas Stihl AG & Co. KG
Badstrasse 115
D- 71336 Waiblingen
www.stihl.de
6366 – Stihl FS 560 C-EM
Test results and evaluation
Brushcutter STIHL FS 560 C-EM with standard handle
with brushcutter head or circular saw
Andreas Stihl AG & Co. KG; Badstrasse 115; 71336 Waiblingen
Test item
Application field
Test result
Evaluation
Brushcutter in the 2 – 3 kW power class for
professional use
Engine power
Speed at
P max = 2.8 kW
Md max bei 2.1 kW
Speed
Spec. fuel
consumption
Torque
8750 min-1
3.1 Nm
49 kW/l
5750 min-1
3.5 Nm
37 kW/l
NE
Fuel consumption
absolute / specific
At max. power
at max. torque
1.7 l/h
1.5 l/h
425 g/kWh
492 g/kWh
Exhaust emission
Complies with type approvals level II of the standard 2002/88 EG
+
o
Approval number: e1*97/68SH3-IIA*2010/26*0664*00
Max. noise development
FS 560 C-EM (Brushcutter)/
FS 560 C-EM (trimmer head)
at ear of operator
Idling
Full throttle, unloaded
81 / 81 dB(A)
107 / 104 dB(A)
-
Equivalent noise pressure level according to DIN EN ISO 22868: 104 / 101 dB(A)
Equivalent noise power level according to DIN EN ISO 22868: 114 / 114 dB(A)
(Mix: idling / full throttle)
Max. Vibration
FS 560 C-EM (Brushcutter)/
Idling
Full throttle, unloaded
Left handle
3.6 / 2.9 m/s²
3.0 / 3.1 m/s²
Right handle
3.3 / 3.0 m/s²
3.2 / 3.0 m/s²
FS 560 C-EM (trimmer head)
o
Equivalent vibration total value according to DIN EN ISO 22867
left handle 3.3 / 3.0 m/s²; right handle 3.2 / 3.0 m/s²
Weight
Weight per unit power
FS 560 C-EM
Without cutting
attachment
3.6 kg/kW
2/5
With Brushcutter blade
350-3)
3.8 kg/kW
+
6366 – Stihl FS 560 C-EM
Operability / Handling
Control elements
Easy to reach and use; automatic resetting of the
ON/OFF switch
+
Machine start
Mechanical starting aid (Ergostart) to facilitate
engine start; with primer
+
Engine control
Electronic control, no adjustment screws
++
Tool replacement
Requires tools (locking pin)
o
Shaft/handlebar
no tools required to adjust shaft to work and
transport position
+
Tank filling
Fuel level of tank visible from outside
+
easy to adjust, very comfortable, padded belts
+
additional quick-release for the attachment
+
Spark plugs /
Cover removal
Easy access, tools required for removing cover
o
Angular gear
Maintenance free
+
Fixed by three bolts,
removal requires tools
easy, no tools required
low
o
Harness
Maintenance
Air filter
Cover
Cleaning
Soiling
+
o
Reliability
No defects during test
o
Operating manual
clear, well illustrated
o
Operator safety
GS-type examination test
DPLF Certificate no.: D-GS 11.103
Rating: ++ / + / o / - / --./.(o = Standard / NE= no evaluation, complies with tolerance value)
3/5
NE
6366 – Stihl FS 560 C-EM
Description and technical details
Motor
- Air-cooled single-cylinder two-stroke engine
³
- Engine displacement 57.1 cm ; bore 47 mm; stroke 32.9 mm
- Spark plug: NGK BPMR7A
Fuel: minimum octane number 90 RON (mixed lubrication 1:50) or two stroke special fuel with
“KWF Test”; Manufacturer's recommendation: Stihl MotoMix
Transmission
- Transmission shaft enclosed by shaft and seated in plastic liner
- Angular gear: gear ratio FS 510 C-EM 1:0.71
- Output shaft thread: M14 x 1.5 left
- Shaft 38 mm x 2.4 mm
- Angle shaft / out put shaft: 145° (for mounting trimmer head)
Main dimensions and weights (measured values)
Length
Without cutting equipment
Width
Engine unit
300 mm
Height
Engine unit
265 mm
Fuel tank volume
Weight
1760 mm
0.99 l
Engine unit (empty weight, without tools and tool
protector)
4/5
10.2 kg
6366 – Stihl FS 560 C-EM
Test
Test facility
Kuratorium für Waldarbeit und Forsttechnik, Gross-Umstadt
DLG-Testzentrum Technik & Betriebsmittel, Gross-Umstadt
Field test:
NFBZ Münchehof
Forstliches Bildungszentrum Itzelberg, Königsbronn
Forstamt Lampertheim
Authors
P. Müßig, KWF, Gross-Umstadt
J. Albert, DLG, Gross-Umstadt
KWF-Test committee
Test committee „Forstgeräte und Werkzeuge“(“Equipment and tools”)
Chairman: Sebastian Paar, Ruhpolding
FPA/DLG-approval valid until November 2017
In acknowledgement of the results of the test carried out by the KWF the approved product is also
entitled to carry the following test marks:
Published by
DLG-Testzentrum Technik & Betriebsmittel
Max-Eyth-Weg 1
D-64823 Gross-Umstadt
Telephone: +49 069/24788-611
Fax: +49 069/24788-110
E-mail: [email protected]
Internet: www.dlg-test.de
ENTAM European Network for Testing of
Agricultural Machines
c/o ENAMA
Via Venafro, 5
I-00159 Rome
Telephone: +39 06 40860030
Fax: +39 06 4076264
E-mail: [email protected]
Internet: www.entam.com
Kuratorium für Waldarbeit und Forsttechnik e.V.
Forsttechnischer Prüfungsausschuss (FPA)
Spremberger Strasse 1
D-64823 Gross-Umstadt
Telephone: +49 06078/785-0
Fax: +49 06078/785-50
E-mail: [email protected]
Internet: www.kwf-online.de
Supported by the Federal Ministry of Consumer Protection, Food and Agriculture per decision by the
German Bundestag and the State Forest Administrations
5/5