Specifications

Table of Contents
Table of Contents
EloTrain - Plug-in System
4-mm plug-in system
1
2
2
Experiment equipment
Experiment equipment specifically for case
Individual EloTrain components (4mm plugs)
Plug-in components
47
Rheostats
Resistors
High-power resistors
Potentiometers
Non-linear resistors
Capacitors
Electrolyte capacitors
Coils, transformer
Diodes, Z-diodes
LEDs
Transistors
Thyristors, Triacs
Operational amplifiers
Optoelectronics
Quartz
Digital technology
Electro-mechanical components, lamps
Empty housings
EloTrain plug-in boards
EloTrain power supplies
EloTrain media
EloTrain Accessories:
Lucas Nülle GmbH
3
24
46
47
49
60
61
64
66
72
75
79
81
83
88
90
91
93
94
102
106
108
111
114
123
Page 1/127
www.lucas-nuelle.com
EloTrain - Plug-in System
Fundamentals of electrical engineering and electronics
A comprehensive education in the fundamentals of electrical engineering is essential to the understanding of
more complex relationships in the various applied sectors in both electrical engineering and electronics.
The freedom to experiment is backed up by formal experiment literature and the use of safety extra-low voltage
means that the system is even safe for complete laymen. It leads to in-depth knowledge and eventually to the
kind of practical skills that form an essential basis for further education and training.
Lucas Nülle GmbH
Page 2/127
www.lucas-nuelle.com
4-mm plug-in system
4-mm plug-in system
A tried and trusted plug-in system for fundamental education
The EloTrain plug-in is a comprehensive set of components for performing experiments in the fields of electrical
engineering, electronics and digital technology. The 4-mm plug-in components can be assembled in any way on
an EloTrain plug-in board so that electronic circuits of any size can be set up, operated and tested.
The plug-in modules include both passive and active electronic components with contacts formed by 4-mm
laminated plugs. When inserted into the plug-in board, the plugs hold the components firmly in place, while
simultaneously making electrical connections between the board’s nodes. Leads and jumpers can then be used
to form links to other nodes on the board as well as other components or measuring instruments.
The 4mm plug-in components are available in three sizes with two, four or six terminals.
For components requiring more terminals than this, additional sockets are provided on top of the module.
The housings are comprised of three plastic parts clipped together. The white top part features a scratch-proof,
high-contrast print of the component’s circuit diagram or symbol along with a type name for the component. The
transparent body is made of extremely tough see-through plastic allowing the inside of the component to be
seen. The base plate is also made containing 4-mm laminated plugs and joined to the body via an easy-to-open
ratchet clip for repair purposes.
High-power elements are contained in open, light-metal housings for improved heat dissipation.
The components designed for digital technology experiments are provided with power via 4 laminated plugs.
Digital inputs and outputs are made available on the top of the modules and can be linked together by means of
leads tipped with 2-mm plugs.
Lucas Nülle GmbH
Page 3/127
www.lucas-nuelle.com
Experiment equipment
Experiment equipment
A set of components specially designed for educational purposes covering a wide variety of topics in electrical
engineering and electronics. The freedom to experiment is backed up by formal experiment literature and the
use of safety extra-low voltage means that the system is even safe for complete laymen.
List of articles:
Pos.
Product name
Bestell-Nr.
1 EloTrain basic set with board: Electrical engineering/electronics,
4mm
PS4200-1C
Anz.
1
This set consists of 82 pieces 4mm plug-in components and
allows for a huge number of experiments to be conducted in the
fields of electrical engineering and electronics. The following
topics are covered by this component set:
DC technology
Assembly of simple circuits
Use of voltmeters and ammeters.
Ohm’s law
Series and parallel connection of resistors
Voltage dividers with and without loads
Light bulb characteristics
Voltage dependent resistors (VDRs)
Negative temperature coefficient thermistors (NTCs)
Lucas Nülle GmbH
Page 4/127
www.lucas-nuelle.com
Positive temperature coefficient thermistors (PTCs)
Light-dependent resistors (LDRs)
Capacitors in DC circuits
Relay circuits
AC and three-phase technology
Generating AC
Characteristics of AC
Resistors in AC circuits
Capacitors in AC circuits
Series and parallel connections of resistors and
capacitors (RC)
Coils (inductors) in AC circuits
Series and parallel connections of resistors and inductors
(RL)
Series and parallel connections of resistors, inductors and
capacitors (RLC)
Series and parallel compensation
Transformers with and without loads
Three-phase networks
Star circuit with symmetric/asymmetric loads
Delta circuit with symmetric/asymmetric loads
Semiconductor components
Diodes in DC and AC circuits
Half-wave and bridge rectifiers with smoothing
Displaying diode characteristics on an oscilloscope
Light-emitting diodes
Photodiodes
Diode-like characteristics of transistor circuits
Input, output and control characteristics of transistors
Transistors in common emitter, common collector and
common base circuits
Transistors used as switches
Transistors used as delay switches
Characteristics of field effect transistors (FETs)
FETs used as controllable resistors and switches
MOSFET characteristic
Dimmer sensor using a MOSFET
Lucas Nülle GmbH
Page 5/127
www.lucas-nuelle.com
Characteristics of diacs, thyristors and triacs
Thyristors used as switches
Phase control using triacs and diacs
Characteristics of unijunction transistors (UJTs)
Pulse emitter using a UJT
Basic electronic circuits
Basic amplifier circuits using bipolar transistors
Basic amplifier circuits using field effect transistors (FETs)
Two-stage AC amplifier
Darlington pair amplifier
Coupled emitter amplifiers
Phase reversing stages
Differential amplifiers
Two-stage DC amplifier with complementary transistors
Push-pull amplifiers
Positive and negative feedback
Square-wave generators
Threshold switches (Schmitt triggers)
Astable multivibrators
Monostable multivibrators
Bistable multivibrators (flip-flops)
Saw tooth generators (pulse generators)
Sine-wave generators with RC and LC elements
Amplitude modulators and demodulators
Frequency modulator
Single-phase and three-phase rectifier circuits
Voltage multipliers
Stabilising circuits
Voltage and current regulators (linear)
Switched-mode voltage regulators
DC converters
Pulse generation using diacs
Pulse generation using unijunction transistors
Phase control using thyristors
Phase control using triacs
Lucas Nülle GmbH
Page 6/127
www.lucas-nuelle.com
Full-wave control with zero-voltage switch
DC voltage switch using thyristors
Using op amps as inverting amplifiers
Using op amps as non-inverting amplifiers
Using op amps as differential amplifiers
Dynamic response of operational amplifiers (op amps)
4mm plug-in components:
All components and jumpers equipped with gold-plated 4mm contacts
Housing made of transparent, highly impact-resistant
plastic
Top featuring scratch-resistant, high-contrast screen print
of type and circuit diagram of component
Easy-to-open housing for repair purposes
The set is supplied on a DIN A4 storage board with scratch-proof
colour printing and includes the following individual components.
Shipment:
1 x switch, 1 x push-button, 1 x relay (15 V)
1 x light bulb, 15V with E10 socket
Resistors: 1 x 10 ohm, 2 x 22 ohm, 1 x 33 ohm, 2 x 100
ohm, 1 x 220 ohm, 1 x 330 ohm, 1 x 470 ohm, 1 x 680
ohm, 3 x 1k ohm, 2 x 2.2k ohm, 3 x 4.7k ohm, 3 x 10k
ohm, 3 x 22k ohm, 2 x 47k ohm, 2 x 100k ohm, 1 x 1M
ohm
1 x potentiometer 100 ohm, 1 x potentiometer 1k ohm, 1 x
potentiometer 10k ohm
1 x NTC, 1 x PTC, 1 x VDR, 1 x LDR
Capacitors: 1 x 10nF, 1 x 47nF, 2 x 0.1µF, 1 x 0.22µF, 2
x 0.47µF, 2 x 1µF
Electrolytic capacitors: 2 x 10µF, 1 x 100µF, 1 x 470µF
coils: 1 x 10mH, 1 x 33mH
1 x coil n=300, 2 x coil n=900, 1 set of cut strip-band core
1 x LED red, 2x LED green
6 x diodes, 1N4007, 1 x germanium diode (AA118)
1 x zener diode 4.7V
1 x transistor, BC547, base left, 1 x transistor, BC547,
base right
Lucas Nülle GmbH
Page 7/127
www.lucas-nuelle.com
1 x transistor, BD237, base left, 1 x transistor, BD237,
base right
1 x transistor, BD238, base right
1 x fieldeffecttransisitor 2N3819, 1 x MOSFET BS170
1 x diac DB3, 1 x triac MAC97A6, 1 x thyristor MCR100-6
1 x unijunction transistor
1 x op-amp TL071C
1 x speaker 0.4w
Storage board, DIN, WxHxD 456 x 297 x 100 mm
Depth with plug-components 150mm
2 Manual, EloTrain: Direct current
SH5002-7B
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Assembly of simple circuits
Use of voltmeters and ammeters.
Ohm’s law
Series and parallel connection of resistors
Voltage dividers with and without loads
Light bulb characteristics
Voltage dependent resistors (VDRs)
Negative temperature coefficient thermistors (NTCs)
Positive temperature coefficient thermistors (PTCs)
Light-dependent resistors (LDRs)
Capacitors in DC circuits
Relay circuits
Lucas Nülle GmbH
Page 8/127
www.lucas-nuelle.com
3 Manual, EloTrain: AC and three-phase current
SH5002-7D
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Generating AC
Characteristics of AC
Resistors in AC circuits
Capacitors in AC circuits
Series and parallel connections of resistors and
capacitors (RC)
Coils (inductors) in AC circuits
Series and parallel connections of resistors and inductors
(RL)
Series and parallel connections of resistors, inductors and
capacitors (RLC)
Series and parallel compensation
Transformers with and without loads
Three-phase networks
Star circuit with symmetric/asymmetric loads
Delta circuit with symmetric/asymmetric loads
Lucas Nülle GmbH
Page 9/127
www.lucas-nuelle.com
4 Manual, EloTrain: Semiconductor components
SH5002-7H
1
SH5002-7J
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Diodes in DC and AC circuits
Half-wave and bridge rectifiers with smoothing
Displaying diode characteristics on an oscilloscope
Light-emitting diodes
Diode-like characteristics of transistor junctions
Input, output and control characteristics of transistors
Transistors in common emitter, common collector and
common base circuits
Transistors used as switches
Transistors used as delay switches
Characteristics of field effect transistors (FETs)
FETs used as controllable resistors and switches
FET characteristic
Dimmer sensor using a FET
Characteristics of diacs, thyristors and triacs
Thyristors used as switches
Phase control using triacs and diacs
Characteristics of unijunction transistors (UJTs)
Pulse emitter using a UJT
5 Manual, EloTrain: Basic electronic circuits
Lucas Nülle GmbH
Page 10/127
www.lucas-nuelle.com
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Basic amplifier circuits using bipolar transistors
Basic amplifier circuits using field effect transistors (FETs)
Two-stage AC amplifier
Darlington pair amplifier
Coupled emitter amplifiers
Phase reversing stages
Differential amplifiers
Two-stage DC amplifier with complementary transistors
Push-pull amplifiers
Positive and negative feedback
Square-wave generators
Threshold switches (Schmitt triggers)
Astable multivibrators
Monostable multivibrators
Bistable multivibrators (flip-flops)
Saw tooth generators (pulse generators)
Sine-wave generators with RC and LC elements
Amplitude modulators and demodulators
Frequency modulators
Single-phase and three-phase rectifier circuits
Voltage multipliers
Stabilising circuits
Voltage and current regulators (linear)
Lucas Nülle GmbH
Page 11/127
www.lucas-nuelle.com
Switched-mode voltage regulators
DC converters
Pulse generation using unijunction transistors
Phase control using thyristors
Phase control using triacs
Full-wave control with zero-voltage switch
DC voltage switch using thyristors
Using op amps as inverting amplifiers
Using op amps as non-inverting amplifiers
Using op amps as differential amplifiers
Dynamic response of operational amplifiers (op amps)
6 EloTrain extension set: Optoeletronics, 4mm plug-in components
PS4200-1P
1
This set contains 8 4mm plug-in components and supplements
the EloTrain basic set. The supplement allows for extra
experiments to be conducted on aspects of optoelectronics.
The following topics are covered by this component set:
Parameters and characteristics of light-emitting diodes
(LEDs)
Control of LEDs
Infra-red LEDs
Photodetectors
Photodiodes
Phototransistors
Transmitting signals using photodiodes and
phototransistors
Optocouplers
Optical fibres
4-mm plug-in components:
All components and jumpers equipped with gold-plated 4mm contacts
Housing made of transparent, high impact-resistance
plastic
Top featuring scratch-resistant, high-contrast screen print
of type and circuit diagram of component
Lucas Nülle GmbH
Page 12/127
www.lucas-nuelle.com
Easy-to-open housing for repair purposes
The set is supplied on a DIN A4 storage plate with scratch-proof
colour printing and includes the following individual components:
1 x photodiode
1 x infra-red LED
1 x LED, 2- 15V
1 x phototransistor
1 x photodetector
1 x optocoupler
1 x variable light source
1 x optical fibre
Storage plate WxHxD 114 x 297 x 100 mm
Depth with plug-components 150mm
Lucas Nülle GmbH
Page 13/127
www.lucas-nuelle.com
7 Manual, EloTrain: Optoelectronics
SH5002-7K
1
PS4300-1A
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Parameters and characteristics of light-emitting diodes
(LEDs)
Control of LEDs
Infra-red LEDs
Photodetectors
Photodiodes
Phototransistors
Transmitting signals using photodiodes and
phototransistors
Optocouplers
Optical fibres
8 EloTrain digital technology set, 4mm plug-in components
This set, consisting of 22 plug-in components for digital
technology, allows for a huge number of experiments to be
conducted in the field of digital technology.
The following topics are covered by this component set:
Introduction to digital technology:
NOT function, AND and NAND gates
OR and NOR gates
Antivalence (XOR) and equivalence (XNOR)
Half adders and full adders
Subtracting circuits
Lucas Nülle GmbH
Page 14/127
www.lucas-nuelle.com
Code conversion
RS-NOR flip-flops
Clocked RS-flip-flops
Static and dynamic D flip-flops
JK flip-flops
JK master-slave flip-flops
Flip-flop applications
4mm plug-in components:
All components and jumpers equipped with gold-plated 4mm contacts
Housing made of transparent, highly impact-resistant
plastic
Top featuring scratch-resistant, high-contrast screen print
of type and circuit diagram of component
Easy-to-open housing for repair purposes
The set is supplied on a DIN A4 storage plate with scratch-proof
colour printing and includes the following individual components:
1 x 4-bit buffer/NOT gate
1 x 4-bit Input
2 x AND/NAND gates, 4 inputs, 2-fold
1 x OR/NOR gates, 4 inputs, 2-fold
2 x AND/NAND gate, 2 inputs, 4-fold
2 x OR/NOR gate, 2 inputs, 4-fold
1 x XOR/XNOR gate, 2 inputs, 4-fold
2 x JK flip-flop, 2-fold
1 x JK master-slave flip-flop, 2-fold
1 x counter, 4-bit
1 x AND/OR/NOT gates
1 x multiplexer, 1 from 4
1 x shift register, 4-bit, 2-fold
1 x adder, 4-bit
1 x buffer, 4-bit, tri-state
1 x display, 7-segment
1 x monoflop, 2-fold
1 x clock generator
Lucas Nülle GmbH
Page 15/127
www.lucas-nuelle.com
1 x storage plate, WxHxD 456 x 297 x 120 mm
9 Manual: EloTrain Introduction to digital technology
SH5002-8B
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
NOT function, AND and NAND gates
OR and NOR gates
Antivalence (XOR) and equivalence (XNOR)
Half adders and full adders
Subtracting circuits
Code conversion
RS-NOR flip-flops
Clocked RS flip-flops
Static and dynamic D flip-flops
JK flip-flops
JK master-slave flip-flops
Flip-flop applications
Lucas Nülle GmbH
Page 16/127
www.lucas-nuelle.com
10 Manual, EloTrain: Sequential circuits
SH5002-8D
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Display of binary numbers on LEDs and LED displays
Asynchronous 4-bit counter
Synchronous counter
Decimal counter
Counters for special codes
Divider circuits (pre-scalers)
Registers and shift registers
Serial and parallel data exchange
Multiplexers and demultiplexers
Lucas Nülle GmbH
Page 17/127
www.lucas-nuelle.com
Additionally required:
Pos.
Product name
Bestell-Nr.
11 EloTrain plug-in board 2/4mm, 120 nodes
Anz.
CO3535-5H
1
Plug-in panel for components with 4mm or 2mm plugs, for the
assembly of highly compact electrical, electronic or digital circuits
using plug-in components. A grid of 120 nodes allows for clear
assembly of circuits even when components are packed densely
together. Circuits are assembled by plugging in components
between nodes. Connections can be made between nodes using
2mm/7.5mm jumpers.
Suitable for 4mm plug-in components und 2mm plug-in
components
Suitable for DigiTrain system components
100 nodes featuring 4 x 2mm sockets and 1 x 4mm socket
20 nodes featuring 3 x 2mm sockets and 1 x 4mm socket
19mm grid for 4mm sockets, 7.5mm grid for 2mm sockets
Four power supply or bus rails each with 12 x 2 mm sockets
and 12 x 4 mm sockets
Ergonomically optimised thanks to console housing
For mounting in panel mounting frames or experiment case
Max. permissible contact current 10A
WxHxD 228 x 297 x 100mm
Lucas Nülle GmbH
Page 18/127
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
12 EloTrain set of connection cables and plugs for 4mm system
Anz.
SO5146-1M
1
EloTrain measuring lead and plug set 4 mm-system:
12 measuring leads, 2mm, 15cm, blue
12 measuring leads, 2mm, 15cm, yellow
2 measuring leads, 2mm, 45cm, black
4 measuring leads, 2mm, 45cm, red
2 measuring leads, 2mm, 45cm, blue
1 measuring lead, 4 to 2mm, 50cm, black
1 measuring lead, 4 to 2mm, 50cm, red
60 jumpers 2mm / 7.5mm, black
2 jumpers 4mm / 19mm, black
2 safety-jumpers 4mm / 19mm, red
1 safety-jumper 4mm / 19mm, blue
2 safety-jumpers 4mm / 19mm, black
2 safety-jumpers 4mm / 19mm, white
Lucas Nülle GmbH
Page 19/127
www.lucas-nuelle.com
Power supply:
Alternative electric power supply for power duct or table top housing
Pos.
Product name
Bestell-Nr.
13 Multi Power Supply 4x DC, 2x AC, 3-phase, function generator
Anz.
CO3538-8M
1
Multifunctional, compact power supply including function generator
and three-phase source, suitable for any basic or advanced
experiments in the fields of electrical engineering, electronics and
digital electronics. It can be operated as desktop device or mounted
in an experiment frame. The power supply has protective isolation
and provides safety extra-low voltage in compliance with EN 61010. A
standard 230-V plug is enough to connect it up. All outputs have selfresetting circuit breakers to cut off the power safely in the event of a
current overload. The equipment is maintenance-free and especially
suited for use by beginners. Modern power supply technology allows
for low power consumption and reduced power loss.
Stabilised fixed voltages, +15 V, -15 V, both 1 A
Stabilised fixed voltage, +5 V, 1 A
Stabilised fixed voltage for vehicles, 12 V, 1 A
Stabilised adjustable voltage, 0 ... 30 V, 1 A with adjustable
current limitation
AC voltages, 12V, 24V, both 200 mA, 50 Hz
Three-phase generator with 3 phases and N
Amplitude 3 x 7/12 V
Output current max. 3 x 200 mA,
Frequency 1 Hz or 50 Hz
Function generator
0.1 Hz ... 1 MHz in 5 ranges
Output signals: sine-wave, triangle, square-wave,
digital
Output voltage: -10 V ... 0 ... 10 V
Output with attenuator: 10:1
Output current max.: 200 mA
Short-circuit-proof or with self-resetting circuit breakers on all
outputs
6 Buttons for various functions
17 LEDs for use as status signal lights
2 LCD displays with blue illumination
Display of DC voltage, current and current limitation
Display of AC voltage and frequency
USB port so that voltage sources can be controlled by
computer
Illuminated mains switch
Experiment board with console housing
Dimensions: 297 mm x 228 mm x 100 mm
Weight: 3.5 kg
Lucas Nülle GmbH
Page 20/127
www.lucas-nuelle.com
14 Multi-function power supply: DC, AC, 3-phase,function generator,
60PU
ST8008-6K
1
Multifunctional compact power supply including function generator
and three-phase source, suitable for any basic or advanced
experiments in the fields of electrical engineering, electronics and
digital technology. The power supply has protective isolation and
provides safety extra-low voltages in compliance with EN 61010. All
outputs have self-resetting circuit breakers to cut off the power safely
in the event of a current overload. The equipment is maintenancefree and especially suited for use by beginners. Modern switchedmode power supply technology allows for low power consumption
and reduces power.
Stabilised fixed voltages, +15V, -15V, both 1A
Stabilised fixed voltage, +5V,1A
Stabilised fixed voltage for vehicles, 12V, 1A
Stabilised adjustable voltage, 0 ... 30V, 1 A
AC voltages, 12V, 24V, both 200mA, 50 Hz
Three-phase generator with 3 phases and N
Amplitude 3 x 7/12V
Output current max. 3 x 200 mA,
Frequency 1Hz or 50Hz
Function generator
0.1 Hz ... 500kHz in 5 ranges
Output signals: sine-wave, triangle, square-wave,
digital
Output voltage - 10V...0 ... 10V
Output with attenuator: 10:1
Output current max.: 200mA
Short-circuit-proof or with self-resetting circuit breakers on all
outputs
5 buttons for various functions
17 LEDs for use as signal lights
Illuminated mains switch
Dimensions: 3HU/60PU
Lucas Nülle GmbH
Page 21/127
www.lucas-nuelle.com
15 Table-top housing for 60 PU inserts incl. connection for nonheating components
ST8008-7K
1
Bestell-Nr.
Anz.
3HU table-top housing, 230 V
Including low-power connector for non-heating apparatus
Housing made of aluminium profiles
Fold-away stand
Fitting for attaching 3HU modules
Width of insert 60PU
Measuring instruments:
Pos.
Product name
16 Max 10 digital multimeter
LM2332
2
Universal and easy-to-use laboratory multimeter for measurement
and testing in educational settings, power plants, process control
installations etc.
3¾-digit multimeter; resolution: ±4 000 Digits
Measurement classification CATII - 600V / CATIII - 300V
Voltage and current measuring ranges: 400mV–
1000V DC, 400mV–1000V AC; 40µA–10A DC; 40µA10A AC
Measurement ranges: 100mohm-40Mohm
Capacitance measuring range 1pF to 200µF
Frequency measuring range 0.001Hz to 500kHz
Duty cycle measurements
Continuity and diode testing
Automatic range selection and battery shut-off, min./max.
and data hold function
Includes protective sleeve, measuring leads and battery
Lucas Nülle GmbH
Page 22/127
www.lucas-nuelle.com
17 Digital dual trace storage oscilloscope w. colour display, incl.
probes 30MHz
LM6210
1
LM9032
2
Digital storage oscilloscope with colour LCD display, high resolution,
backlighting and USB port for transmission of large quantities of data
at high data rates.
Technical data:
Bandwidth 30MHz/125MS/s
Maximum input voltage 400V
8" TFT colour display
USB port, USB flash disk, LAN, VGA
Cursor function
Five automatic measurement functions, storage and retrieval
of traces
Edge and video trigger function
Safety specifications: EN 61010-1
Supplied with accessories: 2 probes, mains lead, USB cable,
software CD
Dimensions: 350x157x120mm (WxHxD)
Weight: 1.0kg
18 Test lead, BNC/2x 4mm plug, 1.5m
Coaxial test cable with BNC connector at one end and two banana
plugs at the other.
Terminations: BNC female (socket) and 2x 4mm plugs
Dimensions: 1.5m
Lucas Nülle GmbH
Page 23/127
www.lucas-nuelle.com
Experiment equipment specifically for case
Experiment equipment specifically for case
A set of components specially designed for educational purposes covering a wide variety of topics in electrical
engineering and electronics. The freedom to experiment is backed up by formal experiment literature and the
use of safety extra-low voltage means that the system is even safe for complete laymen.
List of articles:
Alternative case
Pos.
Product name
Bestell-Nr.
19 EloTrain basic set without board: Electrical
engineering/electronics, 4mm
PS4200-1D
Anz.
1
This set consists of 82 pieces 4mm plug-in components and
allows for a huge number of experiments to be conducted in the
fields of electrical engineering and electronics. The following
topics are covered by this component set:
DC technology
Assembly of simple circuits
Use of voltmeters and ammeters.
Ohm’s law
Series and parallel connection of resistors
Voltage dividers with and without loads
Light bulb characteristics
Lucas Nülle GmbH
Page 24/127
www.lucas-nuelle.com
Voltage dependent resistors (VDRs)
Negative temperature coefficient thermistors (NTCs)
Positive temperature coefficient thermistors (PTCs)
Light-dependent resistors (LDRs)
Capacitors in DC circuits
Relay circuits
AC and three-phase technology
Generating AC
Characteristics of AC
Resistors in AC circuits
Capacitors in AC circuits
Series and parallel connections of resistors and
capacitors (RC)
Coils (inductors) in AC circuits
Series and parallel connections of resistors and inductors
(RL)
Series and parallel connections of resistors, inductors and
capacitors (RLC)
Series and parallel compensation
Transformers with and without loads
Three-phase networks
Star circuit with symmetric/asymmetric loads
Delta circuit with symmetric/asymmetric loads
Semiconductor components
Diodes in DC and AC circuits
Half-wave and bridge rectifiers with smoothing
Displaying diode characteristics on an oscilloscope
Light-emitting diodes
Photodiodes
Diode-like characteristics of transistor circuits
Input, output and control characteristics of transistors
Transistors in common emitter, common collector and
common base circuits
Transistors used as switches
Transistors used as delay switches
Characteristics of field effect transistors (FETs)
FETs used as controllable resistors and switches
Lucas Nülle GmbH
Page 25/127
www.lucas-nuelle.com
MOSFET characteristic
Dimmer sensor using a MOSFET
Characteristics of diacs, thyristors and triacs
Thyristors used as switches
Phase control using triacs and diacs
Characteristics of unijunction transistors (UJTs)
Pulse emitter using a UJT
Basic electronic circuits
Basic amplifier circuits using bipolar transistors
Basic amplifier circuits using field effect transistors (FETs)
Two-stage AC amplifier
Darlington pair amplifier
Coupled emitter amplifiers
Phase reversing stages
Differential amplifiers
Two-stage DC amplifier with complementary transistors
Push-pull amplifiers
Positive and negative feedback
Square-wave generators
Threshold switches (Schmitt triggers)
Astable multivibrators
Monostable multivibrators
Bistable multivibrators (flip-flops)
Saw tooth generators (pulse generators)
Sine-wave generators with RC and LC elements
Amplitude modulators and demodulators
Frequency modulator
Single-phase and three-phase rectifier circuits
Voltage multipliers
Stabilising circuits
Voltage and current regulators (linear)
Switched-mode voltage regulators
DC converters
Pulse generation using diacs
Pulse generation using unijunction transistors
Lucas Nülle GmbH
Page 26/127
www.lucas-nuelle.com
Phase control using thyristors
Phase control using triacs
Full-wave control with zero-voltage switch
DC voltage switch using thyristors
Using op amps as inverting amplifiers
Using op amps as non-inverting amplifiers
Using op amps as differential amplifiers
Dynamic response of operational amplifiers (op amps)
4mm plug-in components:
All components and jumpers equipped with gold-plated 4mm contacts
Housing made of transparent, highly impact-resistant
plastic
Top featuring scratch-resistant, high-contrast screen print
of type and circuit diagram of component
Easy-to-open housing for repair purposes
Shipment:
1 x switch, 1 x push-button, 1 x relay (15 V)
1 x light bulb, 15V with E10 socket
Resistors: 1 x 10 ohm, 2 x 22 ohm, 1 x 33 ohm, 2 x 100
ohm, 1 x 220 ohm, 1 x 330 ohm, 1 x 470 ohm, 1 x 680
ohm, 3 x 1k ohm, 2 x 2.2k ohm, 3 x 4.7k ohm, 3 x 10k
ohm, 3 x 22k ohm, 2 x 47k ohm, 2 x 100k ohm, 1 x 1M
ohm
1 x potentiometer 100 ohm, 1 x potentiometer 1k ohm, 1 x
potentiometer 10k ohm
1 x NTC, 1 x PTC, 1 x VDR, 1 x LDR
Capacitors: 1 x 10nF, 1 x 47nF, 2 x 0.1µF, 1 x 0.22µF, 2
x 0.47µF, 2 x 1µF
Electrolytic capacitors: 2 x 10µF, 1 x 100µF, 1 x 470µF
coils: 1 x 10mH, 1 x 33mH
1 x coil n=300, 2 x coil n=900, 1 set of cut strip-band core
1 x LED red, 2x LED green
6 x diodes, 1N4007, 1 x germanium diode (AA118)
1 x zener diode 4.7V
1 x transistor, BC547, base left, 1 x transistor, BC547,
base right
1 x transistor, BD237, base left, 1 x transistor, BD237,
base right
Lucas Nülle GmbH
Page 27/127
www.lucas-nuelle.com
1 x transistor, BD238, base right
1 x fieldeffecttransisitor 2N3819, 1 x MOSFET BS170
1 x diac DB3, 1 x triac MAC97A6, 1 x thyristor MCR100-6
1 x unijunction transistor
1 x op-amp TL071C
1 x speaker 0.4w
20 EloTrain case to hold DIN A4 boards for storing plug-in
components
SO5127-3L
1
Handy aluminium profile case with handle and removable lid for
storing a complete experiment system with 4mm and/or 2mm plug-in
components.
Capable of accommodating a power supply and universal
plug-in board both measuring 228mm in width
Capable of accommodating more than 100 plug-in
components in the lid
Locking compartment for small parts and experiment leads
Closable locks with strong hinges
Colours: plain aluminium, black, chrome
Dimensions: 600 x 320 x 200mm
Weight: 3kg
Lucas Nülle GmbH
Page 28/127
www.lucas-nuelle.com
21 EloTrain case to hold 2 DIN A4 boards, power supply and for
storing plug-in components
SO5127-3U
1
Handy aluminium profile case with handle and removable lid for
storing a complete experiment system with 4mm and/or 2mm
plug-in components, incl. a printed storage panel for the
accommodation of the EloTrain basic equipment set, the
automotive equipment set or additional component sets to be
integrated into the removable lid.
Capable of accommodating a power supply and universal
plug-in board both measuring 456mm in width
Capable of accommodating more than 100 plug-in
components in the lid
Locking compartment for small parts and experiment
leads
Closable locks with strong hinges
Colours: plain aluminium, black, chrome
Dimensions: 820 x 320 x 200mm
Weight: 4kg
Lucas Nülle GmbH
Page 29/127
www.lucas-nuelle.com
22 Manual, EloTrain: Direct current
SH5002-7B
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Assembly of simple circuits
Use of voltmeters and ammeters.
Ohm’s law
Series and parallel connection of resistors
Voltage dividers with and without loads
Light bulb characteristics
Voltage dependent resistors (VDRs)
Negative temperature coefficient thermistors (NTCs)
Positive temperature coefficient thermistors (PTCs)
Light-dependent resistors (LDRs)
Capacitors in DC circuits
Relay circuits
Lucas Nülle GmbH
Page 30/127
www.lucas-nuelle.com
23 Manual, EloTrain: AC and three-phase current
SH5002-7D
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Generating AC
Characteristics of AC
Resistors in AC circuits
Capacitors in AC circuits
Series and parallel connections of resistors and
capacitors (RC)
Coils (inductors) in AC circuits
Series and parallel connections of resistors and inductors
(RL)
Series and parallel connections of resistors, inductors and
capacitors (RLC)
Series and parallel compensation
Transformers with and without loads
Three-phase networks
Star circuit with symmetric/asymmetric loads
Delta circuit with symmetric/asymmetric loads
Lucas Nülle GmbH
Page 31/127
www.lucas-nuelle.com
24 Manual, EloTrain: Semiconductor components
SH5002-7H
1
SH5002-7J
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Diodes in DC and AC circuits
Half-wave and bridge rectifiers with smoothing
Displaying diode characteristics on an oscilloscope
Light-emitting diodes
Diode-like characteristics of transistor junctions
Input, output and control characteristics of transistors
Transistors in common emitter, common collector and
common base circuits
Transistors used as switches
Transistors used as delay switches
Characteristics of field effect transistors (FETs)
FETs used as controllable resistors and switches
FET characteristic
Dimmer sensor using a FET
Characteristics of diacs, thyristors and triacs
Thyristors used as switches
Phase control using triacs and diacs
Characteristics of unijunction transistors (UJTs)
Pulse emitter using a UJT
25 Manual, EloTrain: Basic electronic circuits
Lucas Nülle GmbH
Page 32/127
www.lucas-nuelle.com
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Basic amplifier circuits using bipolar transistors
Basic amplifier circuits using field effect transistors (FETs)
Two-stage AC amplifier
Darlington pair amplifier
Coupled emitter amplifiers
Phase reversing stages
Differential amplifiers
Two-stage DC amplifier with complementary transistors
Push-pull amplifiers
Positive and negative feedback
Square-wave generators
Threshold switches (Schmitt triggers)
Astable multivibrators
Monostable multivibrators
Bistable multivibrators (flip-flops)
Saw tooth generators (pulse generators)
Sine-wave generators with RC and LC elements
Amplitude modulators and demodulators
Frequency modulators
Single-phase and three-phase rectifier circuits
Voltage multipliers
Stabilising circuits
Voltage and current regulators (linear)
Lucas Nülle GmbH
Page 33/127
www.lucas-nuelle.com
Switched-mode voltage regulators
DC converters
Pulse generation using unijunction transistors
Phase control using thyristors
Phase control using triacs
Full-wave control with zero-voltage switch
DC voltage switch using thyristors
Using op amps as inverting amplifiers
Using op amps as non-inverting amplifiers
Using op amps as differential amplifiers
Dynamic response of operational amplifiers (op amps)
26 EloTrain extension set: Optoeletronics, 4mm plug-in components
PS4200-1P
1
This set contains 8 4mm plug-in components and supplements
the EloTrain basic set. The supplement allows for extra
experiments to be conducted on aspects of optoelectronics.
The following topics are covered by this component set:
Parameters and characteristics of light-emitting diodes
(LEDs)
Control of LEDs
Infra-red LEDs
Photodetectors
Photodiodes
Phototransistors
Transmitting signals using photodiodes and
phototransistors
Optocouplers
Optical fibres
4-mm plug-in components:
All components and jumpers equipped with gold-plated 4mm contacts
Housing made of transparent, high impact-resistance
plastic
Top featuring scratch-resistant, high-contrast screen print
of type and circuit diagram of component
Lucas Nülle GmbH
Page 34/127
www.lucas-nuelle.com
Easy-to-open housing for repair purposes
The set is supplied on a DIN A4 storage plate with scratch-proof
colour printing and includes the following individual components:
1 x photodiode
1 x infra-red LED
1 x LED, 2- 15V
1 x phototransistor
1 x photodetector
1 x optocoupler
1 x variable light source
1 x optical fibre
Storage plate WxHxD 114 x 297 x 100 mm
Depth with plug-components 150mm
Lucas Nülle GmbH
Page 35/127
www.lucas-nuelle.com
27 Manual, EloTrain: Optoelectronics
SH5002-7K
1
PS4300-1A
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Parameters and characteristics of light-emitting diodes
(LEDs)
Control of LEDs
Infra-red LEDs
Photodetectors
Photodiodes
Phototransistors
Transmitting signals using photodiodes and
phototransistors
Optocouplers
Optical fibres
28 EloTrain digital technology set, 4mm plug-in components
This set, consisting of 22 plug-in components for digital
technology, allows for a huge number of experiments to be
conducted in the field of digital technology.
The following topics are covered by this component set:
Introduction to digital technology:
NOT function, AND and NAND gates
OR and NOR gates
Antivalence (XOR) and equivalence (XNOR)
Half adders and full adders
Subtracting circuits
Lucas Nülle GmbH
Page 36/127
www.lucas-nuelle.com
Code conversion
RS-NOR flip-flops
Clocked RS-flip-flops
Static and dynamic D flip-flops
JK flip-flops
JK master-slave flip-flops
Flip-flop applications
4mm plug-in components:
All components and jumpers equipped with gold-plated 4mm contacts
Housing made of transparent, highly impact-resistant
plastic
Top featuring scratch-resistant, high-contrast screen print
of type and circuit diagram of component
Easy-to-open housing for repair purposes
The set is supplied on a DIN A4 storage plate with scratch-proof
colour printing and includes the following individual components:
1 x 4-bit buffer/NOT gate
1 x 4-bit Input
2 x AND/NAND gates, 4 inputs, 2-fold
1 x OR/NOR gates, 4 inputs, 2-fold
2 x AND/NAND gate, 2 inputs, 4-fold
2 x OR/NOR gate, 2 inputs, 4-fold
1 x XOR/XNOR gate, 2 inputs, 4-fold
2 x JK flip-flop, 2-fold
1 x JK master-slave flip-flop, 2-fold
1 x counter, 4-bit
1 x AND/OR/NOT gates
1 x multiplexer, 1 from 4
1 x shift register, 4-bit, 2-fold
1 x adder, 4-bit
1 x buffer, 4-bit, tri-state
1 x display, 7-segment
1 x monoflop, 2-fold
1 x clock generator
Lucas Nülle GmbH
Page 37/127
www.lucas-nuelle.com
1 x storage plate, WxHxD 456 x 297 x 120 mm
29 Manual: EloTrain Introduction to digital technology
SH5002-8B
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
NOT function, AND and NAND gates
OR and NOR gates
Antivalence (XOR) and equivalence (XNOR)
Half adders and full adders
Subtracting circuits
Code conversion
RS-NOR flip-flops
Clocked RS flip-flops
Static and dynamic D flip-flops
JK flip-flops
JK master-slave flip-flops
Flip-flop applications
Lucas Nülle GmbH
Page 38/127
www.lucas-nuelle.com
30 Manual, EloTrain: Sequential circuits
SH5002-8D
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Display of binary numbers on LEDs and LED displays
Asynchronous 4-bit counter
Synchronous counter
Decimal counter
Counters for special codes
Divider circuits (pre-scalers)
Registers and shift registers
Serial and parallel data exchange
Multiplexers and demultiplexers
Lucas Nülle GmbH
Page 39/127
www.lucas-nuelle.com
Additionally required:
Pos.
Product name
Bestell-Nr.
31 EloTrain plug-in board 2/4mm, 120 nodes
Anz.
CO3535-5H
1
Plug-in panel for components with 4mm or 2mm plugs, for the
assembly of highly compact electrical, electronic or digital circuits
using plug-in components. A grid of 120 nodes allows for clear
assembly of circuits even when components are packed densely
together. Circuits are assembled by plugging in components
between nodes. Connections can be made between nodes using
2mm/7.5mm jumpers.
Suitable for 4mm plug-in components und 2mm plug-in
components
Suitable for DigiTrain system components
100 nodes featuring 4 x 2mm sockets and 1 x 4mm socket
20 nodes featuring 3 x 2mm sockets and 1 x 4mm socket
19mm grid for 4mm sockets, 7.5mm grid for 2mm sockets
Four power supply or bus rails each with 12 x 2 mm sockets
and 12 x 4 mm sockets
Ergonomically optimised thanks to console housing
For mounting in panel mounting frames or experiment case
Max. permissible contact current 10A
WxHxD 228 x 297 x 100mm
Lucas Nülle GmbH
Page 40/127
www.lucas-nuelle.com
Accessories:
Pos.
Product name
Bestell-Nr.
32 EloTrain set of connection cables and plugs for 4mm system
Anz.
SO5146-1M
1
EloTrain measuring lead and plug set 4 mm-system:
12 measuring leads, 2mm, 15cm, blue
12 measuring leads, 2mm, 15cm, yellow
2 measuring leads, 2mm, 45cm, black
4 measuring leads, 2mm, 45cm, red
2 measuring leads, 2mm, 45cm, blue
1 measuring lead, 4 to 2mm, 50cm, black
1 measuring lead, 4 to 2mm, 50cm, red
60 jumpers 2mm / 7.5mm, black
2 jumpers 4mm / 19mm, black
2 safety-jumpers 4mm / 19mm, red
1 safety-jumper 4mm / 19mm, blue
2 safety-jumpers 4mm / 19mm, black
2 safety-jumpers 4mm / 19mm, white
Lucas Nülle GmbH
Page 41/127
www.lucas-nuelle.com
Power supply:
Alternative electric power supply for power duct or table top housing
Pos.
Product name
Bestell-Nr.
33 Multi Power Supply 4x DC, 2x AC, 3-phase, function generator
Anz.
CO3538-8M
1
Multifunctional, compact power supply including function generator
and three-phase source, suitable for any basic or advanced
experiments in the fields of electrical engineering, electronics and
digital electronics. It can be operated as desktop device or mounted
in an experiment frame. The power supply has protective isolation
and provides safety extra-low voltage in compliance with EN 61010. A
standard 230-V plug is enough to connect it up. All outputs have selfresetting circuit breakers to cut off the power safely in the event of a
current overload. The equipment is maintenance-free and especially
suited for use by beginners. Modern power supply technology allows
for low power consumption and reduced power loss.
Stabilised fixed voltages, +15 V, -15 V, both 1 A
Stabilised fixed voltage, +5 V, 1 A
Stabilised fixed voltage for vehicles, 12 V, 1 A
Stabilised adjustable voltage, 0 ... 30 V, 1 A with adjustable
current limitation
AC voltages, 12V, 24V, both 200 mA, 50 Hz
Three-phase generator with 3 phases and N
Amplitude 3 x 7/12 V
Output current max. 3 x 200 mA,
Frequency 1 Hz or 50 Hz
Function generator
0.1 Hz ... 1 MHz in 5 ranges
Output signals: sine-wave, triangle, square-wave,
digital
Output voltage: -10 V ... 0 ... 10 V
Output with attenuator: 10:1
Output current max.: 200 mA
Short-circuit-proof or with self-resetting circuit breakers on all
outputs
6 Buttons for various functions
17 LEDs for use as status signal lights
2 LCD displays with blue illumination
Display of DC voltage, current and current limitation
Display of AC voltage and frequency
USB port so that voltage sources can be controlled by
computer
Illuminated mains switch
Experiment board with console housing
Dimensions: 297 mm x 228 mm x 100 mm
Weight: 3.5 kg
Lucas Nülle GmbH
Page 42/127
www.lucas-nuelle.com
34 Multi-function power supply: DC, AC, 3-phase,function generator,
60PU
ST8008-6K
1
Multifunctional compact power supply including function generator
and three-phase source, suitable for any basic or advanced
experiments in the fields of electrical engineering, electronics and
digital technology. The power supply has protective isolation and
provides safety extra-low voltages in compliance with EN 61010. All
outputs have self-resetting circuit breakers to cut off the power safely
in the event of a current overload. The equipment is maintenancefree and especially suited for use by beginners. Modern switchedmode power supply technology allows for low power consumption
and reduces power.
Stabilised fixed voltages, +15V, -15V, both 1A
Stabilised fixed voltage, +5V,1A
Stabilised fixed voltage for vehicles, 12V, 1A
Stabilised adjustable voltage, 0 ... 30V, 1 A
AC voltages, 12V, 24V, both 200mA, 50 Hz
Three-phase generator with 3 phases and N
Amplitude 3 x 7/12V
Output current max. 3 x 200 mA,
Frequency 1Hz or 50Hz
Function generator
0.1 Hz ... 500kHz in 5 ranges
Output signals: sine-wave, triangle, square-wave,
digital
Output voltage - 10V...0 ... 10V
Output with attenuator: 10:1
Output current max.: 200mA
Short-circuit-proof or with self-resetting circuit breakers on all
outputs
5 buttons for various functions
17 LEDs for use as signal lights
Illuminated mains switch
Dimensions: 3HU/60PU
Lucas Nülle GmbH
Page 43/127
www.lucas-nuelle.com
35 Table-top housing for 60 PU inserts incl. connection for nonheating components
ST8008-7K
1
Bestell-Nr.
Anz.
3HU table-top housing, 230 V
Including low-power connector for non-heating apparatus
Housing made of aluminium profiles
Fold-away stand
Fitting for attaching 3HU modules
Width of insert 60PU
Measuring instruments:
Pos.
Product name
36 Max 10 digital multimeter
LM2332
2
Universal and easy-to-use laboratory multimeter for measurement
and testing in educational settings, power plants, process control
installations etc.
3¾-digit multimeter; resolution: ±4 000 Digits
Measurement classification CATII - 600V / CATIII - 300V
Voltage and current measuring ranges: 400mV–
1000V DC, 400mV–1000V AC; 40µA–10A DC; 40µA10A AC
Measurement ranges: 100mohm-40Mohm
Capacitance measuring range 1pF to 200µF
Frequency measuring range 0.001Hz to 500kHz
Duty cycle measurements
Continuity and diode testing
Automatic range selection and battery shut-off, min./max.
and data hold function
Includes protective sleeve, measuring leads and battery
Lucas Nülle GmbH
Page 44/127
www.lucas-nuelle.com
37 Digital dual trace storage oscilloscope w. colour display, incl.
probes 30MHz
LM6210
1
LM9032
2
Digital storage oscilloscope with colour LCD display, high resolution,
backlighting and USB port for transmission of large quantities of data
at high data rates.
Technical data:
Bandwidth 30MHz/125MS/s
Maximum input voltage 400V
8" TFT colour display
USB port, USB flash disk, LAN, VGA
Cursor function
Five automatic measurement functions, storage and retrieval
of traces
Edge and video trigger function
Safety specifications: EN 61010-1
Supplied with accessories: 2 probes, mains lead, USB cable,
software CD
Dimensions: 350x157x120mm (WxHxD)
Weight: 1.0kg
38 Test lead, BNC/2x 4mm plug, 1.5m
Coaxial test cable with BNC connector at one end and two banana
plugs at the other.
Terminations: BNC female (socket) and 2x 4mm plugs
Dimensions: 1.5m
Lucas Nülle GmbH
Page 45/127
www.lucas-nuelle.com
Individual EloTrain components (4mm plugs)
Individual EloTrain components (4mm plugs)
You can put together a set of components tailored specifically to your own needs or select individual
components from our extensive range of modules.
Extensive range of modules featuring both active and passive components
Wide variety of plug-in boards for various needs
Multi-function power supplies and measuring instruments
Manuals conveying knowledge of electrical fundamentals as well as more complex experiments and
everything in between
Storage systems to keep components safe
Lucas Nülle GmbH
Page 46/127
www.lucas-nuelle.com
Plug-in components
Plug-in components
The EloTrain plug-in system includes an extensive range of plug-in modules featuring both active and passive
components. All components and jumpers are equipped with gold-plated contacts, preventing oxidation and
ensuring that the contact resistance remains low for the entire life-time of the module.
Rheostats
Rheostats
Lucas Nülle GmbH
Page 47/127
www.lucas-nuelle.com
List of articles:
Pos.
Product name
Bestell-Nr.
Anz.
39 Variable resistor, 1kilohm, housing PS4-1
PS4120-9D
1
40 Variable resistor, 5kilohm, housing PS4-1
PS4120-9F
1
41 Variable resistor, 10kilohm, housing PS4-1
PS4120-9G
1
42 Variable resistor, 47kilohm, housing PS4-1
PS4120-9J
1
43 Variable resistor, 100kilohm, housing PS4-1
PS4120-9K
1
Lucas Nülle GmbH
Page 48/127
www.lucas-nuelle.com
44 Variable resistor, 500kilohm, housing PS4-1
PS4120-9M
1
Resistors
Resistors
List of articles:
Pos.
Product name
Bestell-Nr.
45 Resistor, 0.1ohm, 2W, housing PS4-1
Lucas Nülle GmbH
PS4121-1A
Page 49/127
Anz.
1
www.lucas-nuelle.com
46 Resistor, 0.22ohm, 2W, housing PS4-1
PS4121-1B
1
47 Resistor, 0.47ohm, 2W, housing PS4-1
PS4121-1C
1
48 Resistor, 1ohm, 2W,housing PS4-1
PS4121-1D
1
49 Resistor, 2ohm, 2W,housing PS4-1
PS4121-1S
1
50 Resistor, 2.7ohm, 2W, housing PS4-1
PS4121-1E
1
Lucas Nülle GmbH
Page 50/127
www.lucas-nuelle.com
51 Resistor, 4.7ohm, 2W, housing PS4-1
PS4121-1F
1
52 Resistor, 8.2ohm, 2W, housing PS4-2
PS4121-1G
1
53 Resistor, 10ohm, 2W, housing PS4-1
PS4121-2A
1
54 Resistor, 12ohm, 2W, housing PS4-1
PS4121-2B
1
55 Resistor, 15ohm, 2W, housing PS4-1
PS4121-2C
1
Lucas Nülle GmbH
Page 51/127
www.lucas-nuelle.com
56 Resistor, 18ohm, 2W, housing PS4-1
PS4121-2D
1
57 Resistor, 22ohm, 2W, housing PS4-1
PS4121-2E
1
58 Resistor, 27ohm, 2W, housing PS4-1
PS4121-2F
1
59 Resistor, 33ohm, 2W, housing PS4-1
PS4121-2G
1
60 Resistor, 39ohm, 2W, housing PS4-1
PS4121-2H
1
Lucas Nülle GmbH
Page 52/127
www.lucas-nuelle.com
61 Resistor, 47ohm, 2W, housing PS4-1
PS4121-2J
1
62 Resistor, 56ohm, 2W, housing PS4-1
PS4121-2K
1
63 Resistor, 68ohm, 2W, housing PS4-1
PS4121-2L
1
64 Resistor, 82ohm, 2W, housing PS4-1
PS4121-2M
1
65 Resistor, 100ohm, 2W, housing PS4-1
PS4121-2N
1
Lucas Nülle GmbH
Page 53/127
www.lucas-nuelle.com
66 Resistor, 120ohm, 2W, housing PS4-1
PS4121-2P
1
67 Resistor, 150ohm, 2W, housing PS4-1
PS4121-2Q
1
68 Resistor, 180ohm, 2W, housing PS4-1
PS4121-2R
1
69 Resistor, 220ohm, 2W, housing PS4-1
PS4121-2S
1
70 Resistor, 270ohm, 2W, housing PS4-1
PS4121-2T
1
Lucas Nülle GmbH
Page 54/127
www.lucas-nuelle.com
71 Resistor, 330ohm, 2W, housing PS4-1
PS4121-2U
1
72 Resistor, 390ohm, 2W, housing PS4-1
PS4121-2V
1
73 Resistor, 470ohm, 2W, housing PS4-1
PS4121-2W
1
74 Resistor, 560ohm, 2W, housing PS4-1
PS4121-2X
1
75 Resistor, 680ohm, 2W, housing PS4-1
PS4121-3A
1
Lucas Nülle GmbH
Page 55/127
www.lucas-nuelle.com
76 Resistor, 820ohm, 2W, housing PS4-1
PS4121-3B
1
77 Resistor, 1kilohm, 1W, housing PS4-1
PS4121-3C
1
78 Resistor, 1.2kilohm, 1W, housing PS4-1
PS4121-3D
1
79 Resistor, 1.5kilohm, 1W, housing PS4-1
PS4121-3E
1
80 Resistor, 1.8kilohm, 1W, housing PS4-1
PS4121-3F
1
Lucas Nülle GmbH
Page 56/127
www.lucas-nuelle.com
81 Resistor, 2.2kilohm, 1W, housing PS4-1
PS4121-3G
1
82 Resistor, 2.7kilohm, 1W, housing PS4-1
PS4121-3H
1
83 Resistor, 3.3kilohm, 1W, housing PS4-1
PS4121-3J
1
84 Resistor, 3.9kilohm, 1W, housing PS4-1
PS4121-3K
1
85 Resistor, 4.7kilohm, 1W, housing PS4-1
PS4121-3L
1
Lucas Nülle GmbH
Page 57/127
www.lucas-nuelle.com
86 Resistor, 5.6kilohm, 1W, housing PS4-1
PS4121-3M
1
87 Resistor, 6.8kilohm, 1W, housing PS4-1
PS4121-3N
1
88 Resistor, 8.2kilohm, 1W, housing PS4-1
PS4121-3P
1
89 Resistor, 10kilohm,0.5W, housing PS4-1
PS4121-3Q
1
90 Resistor, 12kilohm,0.5W, housing PS4-1
PS4121-3R
1
Lucas Nülle GmbH
Page 58/127
www.lucas-nuelle.com
91 Resistor, 15kilohm,0.5W, housing PS4-1
PS4121-3S
1
92 Resistor, 18kilohm,0.5W, housing PS4-1
PS4121-3T
1
93 Resistor, 22kilohm,0.5W, housing PS4-1
PS4121-3U
1
94 Resistor, 27kilohm,0.5W, housing PS4-1
PS4121-3V
1
Lucas Nülle GmbH
Page 59/127
www.lucas-nuelle.com
High-power resistors
High-power resistors
List of articles:
Pos.
Product name
Bestell-Nr.
Anz.
117 Resistor, 8.2ohm, 10W, housing PSA4-2
PS4121-6T
1
118 Resistor, 22.ohm, 10W, housing PSA4-2
PS4121-6E
1
Lucas Nülle GmbH
Page 60/127
www.lucas-nuelle.com
Potentiometers
Potentiometers
List of articles:
Pos.
Product name
Bestell-Nr.
Anz.
119 Potentiometer, 100ohm, 0.5W lin., housing PS4-2
PS4121-8A
1
120 Potentiometer, 250ohm, 0.5W lin., housing PS4-2
PS4121-8B
1
Potentiometer 220 Ohm, 0,5W linear
Lucas Nülle GmbH
Page 61/127
www.lucas-nuelle.com
121 Potentiometer, 470ohm, 0.5W lin., housing PS4-2
PS4121-8C
1
122 Potentiometer, 1kilohm, 0.5W lin., housing PS4-2
PS4121-8D
1
123 Potentiometer, 2.5kilohm, 0.5W lin., housing PS4-2
PS4121-8E
1
124 Potentiometer, 4.7kilohm, 0.5W lin., housing PS4-2
PS4121-8F
1
125 Potentiometer, 10kilohm, 0.5W lin., housing PS4-2
PS4121-8G
1
Lucas Nülle GmbH
Page 62/127
www.lucas-nuelle.com
126 Potentiometer, 25kilohm, 0.5W lin., housing PS4-2
PS4121-8H
1
127 Potentiometer, 47kilohm, 0.5W lin., housing PS4-2
PS4121-8J
1
128 Potentiometer, 100kilohm, 0.5W lin., housing PS4-2
PS4121-8K
1
129 Potentiometer, 250kilohm, 0.5W lin., housing PS4-2
PS4121-8L
1
130 Potentiometer, 470kilohm, 0.5W lin., housing PS4-2
PS4121-8M
1
Lucas Nülle GmbH
Page 63/127
www.lucas-nuelle.com
131 Potentiometer, 1megohm, 0.5W lin., housing PS4-2
PS4121-8N
1
132 Potentiometer, 27ohm, 3W, housing PS4-2
PS4121-9A
1
133 Potentiometer, 470ohm, 3W, housing PS4-2
PS4121-9F
1
Non-linear resistors
Non-linear resistors
Lucas Nülle GmbH
Page 64/127
www.lucas-nuelle.com
List of articles:
Pos.
Product name
Bestell-Nr.
Anz.
134 VDR resistor, 40E/12V/10mA, housing PS4-1
PS4122-9A
1
135 VDR resistor, 800E/8V/10mA, housing PS4-1
PS4122-9B
1
136 PTC resistor, 30E/40V/70mA, housing PS4-1
PS4122-9C
1
137 PTC resistor, 160E/30V/40mA, housing PS4-1
PS4122-9D
1
138 NTC resistor, 150E/0.75W/K164, housing PS4-1
PS4122-9G
1
Lucas Nülle GmbH
Page 65/127
www.lucas-nuelle.com
139 NTC resistor, 1K/0.75W/K164, housing PS4-1
PS4122-9H
1
140 LDR resistor, housing PS4-1
PS4123-5L
1
Capacitors
Capacitors
List of articles:
Lucas Nülle GmbH
Page 66/127
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
Anz.
141 Capacitor, 10pF, housing PS4-1
PS4122-1A
1
142 Capacitor, 22pF, housing PS4-1
PS4122-2A
1
143 Capacitor, 33pF, housing PS4-1
PS4122-1B
1
144 Capacitor, 47pF, housing PS4-1
PS4122-1C
1
145 Capacitor, 68pF, housing PS4-1
PS4122-1D
1
146 Capacitor, 100pF, housing PS4-1
PS4122-1E
1
Lucas Nülle GmbH
Page 67/127
www.lucas-nuelle.com
147 Capacitor, 220pF, housing PS4-1
PS4122-1F
1
148 Capacitor, 330pF, housing PS4-1
PS4122-1G
1
149 Capacitor, 470pF, housing PS4-1
PS4122-1H
1
150 Capacitor, 560pF, housing PS4-1
PS4122-1J
1
151 Capacitor, 680pF, housing PS4-1
PS4122-1K
1
Lucas Nülle GmbH
Page 68/127
www.lucas-nuelle.com
152 Capacitor, 1nF, housing PS4-1
PS4122-1L
1
153 Capacitor, 2.2nF, housing PS4-1
PS4122-1N
1
154 Capacitor, 3.3nF, housing PS4-1
PS4122-1P
1
155 Capacitor, 4.7nF, housing PS4-1
PS4122-1Q
1
156 Capacitor, 6.8nF, housing PS4-1
PS4122-1R
1
Lucas Nülle GmbH
Page 69/127
www.lucas-nuelle.com
157 Capacitor, 10nF, housing PS4-1
PS4122-1S
1
158 Capacitor, 22nF, housing PS4-1
PS4122-1T
1
159 Capacitor, 33nF, housing PS4-1
PS4122-1U
1
160 Capacitor, 47nF, housing PS4-1
PS4122-1V
1
161 Capacitor, 68nF, housing PS4-1
PS4122-2B
1
Lucas Nülle GmbH
Page 70/127
www.lucas-nuelle.com
162 Capacitor, 0.1µF, housing PS4-1
PS4122-1W
1
163 Capacitor, 0.22µF, housing PS4-1
PS4122-1X
1
164 Capacitor, 0.47µF, housing PS4-1
PS4122-2C
1
165 Capacitor, 1µF, housing PS4-1
PS4122-2E
1
166 Capacitor, 2.2µF, housing PS4-1
PS4122-2F
1
Lucas Nülle GmbH
Page 71/127
www.lucas-nuelle.com
167 Capacitor, 4.7µF, housing PS4-1
PS4122-2H
1
168 Capacitor, 10µF, housing PS4-1
PS4122-2K
1
Electrolyte capacitors
Electrolyte capacitors
List of articles:
Lucas Nülle GmbH
Page 72/127
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
Anz.
169 Capacitor, 1µF electrolytic, housing PS4-1
PS4122-4A
1
170 Capacitor, 2.2µF electrolytic, housing PS4-1
PS4122-4B
1
171 Capacitor, 4.7µF electrolytic, housingPS4-1
PS4122-4C
1
172 Capacitor, 10µF electrolytic, housing PS4-1
PS4122-4D
1
173 Capacitor, 22µF electrolytic, housing PS4-1
PS4122-4E
1
Lucas Nülle GmbH
Page 73/127
www.lucas-nuelle.com
174 Capacitor, 47µF electrolytic, housing PS4-1
PS4122-4F
1
175 Capacitor, 100µF electrolytic, housing PS4-1
PS4122-4G
1
176 Capacitor, 220µF electrolytic, housing PS4-1
PS4122-4H
1
177 Capacitor, 470µF electrolytic, housing PS4-1
PS4122-4J
1
178 Capacitor, 1000µF electrolytic, housingPS4-2
PS4122-4K
1
Lucas Nülle GmbH
Page 74/127
www.lucas-nuelle.com
179 Capacitor, 2200µF electrolytic, housing PS4-2
PS4122-4L
1
180 Capacitor, 4700µF electrolytic, housingPS 4-3
PS4122-4M
1
Coils, transformer
Coils, transformer
List of articles:
Pos.
Product name
Bestell-Nr.
181 Coil, 0.1mH (ferrite core), housing PS4-1
PS4124-1A
Anz.
1
Spule mit Ferrit Kern
Induktivität: 0,1mH
Max. Strom: 500mA
Widerstand < 0,5 Ohm
Lucas Nülle GmbH
Page 75/127
www.lucas-nuelle.com
182 Coil, 0.33mH (ferrite core), housing PS4-1
PS4124-1B
1
PS4124-1C
1
PS4124-1D
1
PS4124-1E
1
Spule mit Ferrit Kern
Induktivität: 0,33mH
Max. Strom: 400mA
Widerstand < 0,9 Ohm
183 Coil, 1mH (ferrite core), housing PS4-1
Spule mit Ferrit Kern
Induktivität: 1mH
Max. Strom: 200mA
Widerstand < 2,5 Ohm
184 Coil, 3.3mH (ferrite core), housing PS4-1
Spule mit Ferrit Kern
Induktivität: 3,3mH
Max. Strom: 100mA
Widerstand < 12 Ohm
185 Coil, 10mH (ferritecore), housing PS4-1
Spule mit Ferrit Kern
Induktivität: 10mH
Max. Strom: 60mA
Widerstand < 40 Ohm
Lucas Nülle GmbH
Page 76/127
www.lucas-nuelle.com
186 Coil, 33mH (ferritecore), housing PS4-1
PS4124-1F
1
PS4124-1G
1
PS4124-2A
1
PS4124-2B
1
Spule mit Ferrit Kern
Induktivität: 33mH
Max. Strom: 30mA
Widerstand < 75 Ohm
187 Coil, 100mH (ferrite core), housing PS4-1
Spule mit Ferrit Kern
Induktivität: 100mH
Max. Strom: 10mA
Widerstand < 150 Ohm
188 Transformer for push-pull amplifier, housing PS4-3
Transformator zum Aufbau von Gegentaktenstufen
Primärwicklung: N=684
Sekundärwicklung: 2 x N=195
Max. Strom primär und sekundär: 22mA
Max. Spannung: primär: 30V
189 Transformer, housing PS4-3
Transformator mit Eisenkern
Primärwicklung: 2 x N=195
Sekundärwicklung: N=684
Max. Strom primär und sekundär: 22mA
Max. Spannung: primär: 24V
Lucas Nülle GmbH
Page 77/127
www.lucas-nuelle.com
190 Coil, N = 100, housing PS4-1
PS4124-2C
1
PS4124-2D
1
PS4124-2E
1
PS4124-2N
1
Luftspule zum Einsatz als Induktivität mit oder ohne Kern oder zum
Aufbau eines Transformators mit Hilfe einer zweiten Luftspule und
dem Satz Schnittbandkernhälften
Wicklung N=100
Max. Strom: 1A
191 Coil, N = 300, housing PS4-1
Luftspule zum Einsatz als Induktivität mit oder ohne Kern oder zum
Aufbau eines Transformators mit Hilfe einer zweiten Luftspule und
dem Satz Schnittbandkernhälften
Wicklung N=300
Max. Strom: 0,6A
192 Coil, N = 900, housing PS4-1
Luftspule zum Einsatz als Induktivität mit oder ohne Kern oder zum
Aufbau eines Transformators mit Hilfe einer zweiten Luftspule und
dem Satz Schnittbandkernhälften
Wicklung N=900
Max. Strom: 0,3A
193 Cut strip-wound core for transformer
Satz, bestehend aus 2 Stück Schnittbandkernhälften zum Aufbau
eines Transformators mit zwei zusätzlich erforderlichen Spulen mit
100, 300 oder 900 Windungen.
Lucas Nülle GmbH
Page 78/127
www.lucas-nuelle.com
Diodes, Z-diodes
Diodes, Z-diodes
List of articles:
Pos.
Product name
Bestell-Nr.
Anz.
194 Diode 1 N 4148, housing PS4-1
PS4122-7A
1
195 Diode 1 N 4007, housing PS4-1
PS4122-7C
1
Lucas Nülle GmbH
Page 79/127
www.lucas-nuelle.com
196 Germanium diode AA 118, housing PS4-1
PS4122-7D
1
197 Zener diode ZPD 3.3, housing PS4-1
PS4122-7X
1
198 Zener diode ZPD 3.9, housing PS4-1
PS4122-7Y
1
199 Zener diode ZPD 4.7, housing PS4-1
PS4122-8A
1
200 Zener diode ZPD 6.2, housing PS4-1
PS4122-8B
1
Lucas Nülle GmbH
Page 80/127
www.lucas-nuelle.com
201 Zener diode ZPD 10,housing PS4-1
PS4122-8C
1
202 Zener diode ZPD 12,housing PS4-1
PS4122-8E
1
LEDs
LEDs
List of articles:
Lucas Nülle GmbH
Page 81/127
www.lucas-nuelle.com
Pos.
Product name
Bestell-Nr.
Anz.
203 LED, red, housing PS4-1
PS4123-5B
1
204 LED, orange, housing PS4-1
PS4123-5C
1
205 LED, yellow, housing PS4-1
PS4123-5D
1
206 LED, green, housingPS4-1
PS4123-5E
1
207 LED, infrared for use as waveguide transmitter, housingPS4-1
PS4123-5H
1
Lucas Nülle GmbH
Page 82/127
www.lucas-nuelle.com
208 LED, green, 2-15V, housing PS4-1
PS4123-8J
1
209 LED, red, 2-15V, housing PS4-1
PS4123-8K
1
210 LED, yellow, 2-15V,housing PS4-1
PS4123-8L
1
Transistors
Transistors
Lucas Nülle GmbH
Page 83/127
www.lucas-nuelle.com
List of articles:
Pos.
Product name
Bestell-Nr.
Anz.
211 Transistor, Si, NPN, AC151, base left, housing PS4-2
PS4123-1A
1
212 Transistor, Si, NPN, BC547, base left, housing PS4-2
PS4123-1C
1
213 Transistor, Si, NPN, BC547, base right,housing PS4-2
PS4123-1D
1
214 Transistor, Si, PNP, BC558, base right,housing PS4-2
PS4123-1F
1
215 Transistor, Si, PNP, BC558, base left, housing PS4-2
PS4123-1E
1
Lucas Nülle GmbH
Page 84/127
www.lucas-nuelle.com
216 Transistor, Si, NPN, BD237, base left, housing PS4-2
PS4123-1G
1
217 Transistor, Si, NPN, BD237, base right,housing PS4-2
PS4123-1H
1
218 Transistor, Si, PNP, BD238, base left, housing PS4-2
PS4123-1J
1
219 Transistor, Si, PNP, BD238, base right,housing PS4-2
PS4123-1K
1
220 Transistor, Si, NPN, BD135, base left, housing PSA4-2
PS4123-1U
1
Lucas Nülle GmbH
Page 85/127
www.lucas-nuelle.com
221 Transistor, Si, NPN, BD135, base right,housing PSA4-2
PS4123-1V
1
222 Transistor, Si, PNP, BD136, base left, housing PSA4-2
PS4123-1W
1
223 Transistor, Si, PNP, BD136, base right,housing PSA4-2
PS4123-1X
1
224 Darlington transistor TIP 162, base left, housing PSA4-2
PS4123-2C
1
PS4123-2D
1
NPN-Darlington-Transistor montiert in Alugehäuse als Kühlkörper
Max. Strom Transistor: 10A (kurzzeitig)
Max. Kollector-Emitter Spannung Transistor: 300V
Betrieb nur bei Schutzkleinspannung (Berührungsschutz)
225 Power MOSFET, N-Channel, 100V, 10A, housing PS4A-2
Power-MOS-Feldeffekttransistor, n-Kanal, montiert in Alugehäuse als
Kühlkörper
Max. Strom Transistor: 10A (kurzzeitig)
Max. Drain-Source Spannung Transistor: 100V
Betrieb nur bei Schutzkleinspannung (Berührungsschutz)
Lucas Nülle GmbH
Page 86/127
www.lucas-nuelle.com
226 Power MOSFET, P-Channel, 100V, 10A, housing PS4A-2
PS4123-2E
1
PS4123-2F
1
228 Field-effect transistor 2 N 3819, housing PS4-2
PS4123-2H
1
229 Field-effect transistor 2 N 3819, housing PS4-2
PS4123-2H
1
230 Field-effect transistor 2 N 3820, housing PS4-2
PS4123-2J
1
Power-MOS-Feldeffekttransistor, p-Kanal, montiert in Alugehäuse als
Kühlkörper
Max. Strom Transistor: 10A (kurzzeitig)
Max. Drain-Source Spannung Transistor: 100V
Betrieb nur bei Schutzkleinspannung (Berührungsschutz)
227 Field-effect transistor 2 N 3819, housing PS2-2
Typ: BS250
Lucas Nülle GmbH
Page 87/127
www.lucas-nuelle.com
231 Si dual gate BF 900, housing PS4-2
PS4123-2K
1
Thyristors, Triacs
Thyristors, Triacs
List of articles:
Pos.
Product name
Bestell-Nr.
232 Diac, 30V/300µA, housing PS4-1
Lucas Nülle GmbH
PS4123-3B
Page 88/127
Anz.
1
www.lucas-nuelle.com
233 Unijunction transistor, 30V, housing PS4-2
PS4123-3E
1
234 Thyristor, 200V/1A,housing PS4-2
PS4123-3F
1
235 Triac, 200V/1A, housing PS4-2
PS4123-3G
1
236 Thyristor, 800V/10A, housing PSA4-2
PS4123-3P
1
Typ BT 33
Lucas Nülle GmbH
Page 89/127
www.lucas-nuelle.com
Operational amplifiers
Operational amplifiers
List of articles:
Pos.
Product name
Bestell-Nr.
237 Operational amplifier TL 071 C, housingPS4-3
PS4123-2V
Anz.
1
Unbeschalteter Operationsverstärker zum Aufbau von
elektronischen Schaltungen.
Ein- und Ausgänge auf 4 Stück vergoldete 4mm
Lamellenstecker
Trimmer für Offsetabgleich
Typ: TL071
Versorgungsspannung +/-15V über 4-mm-Buchsen auf der
Oberseite
Lucas Nülle GmbH
Page 90/127
www.lucas-nuelle.com
Optoelectronics
Optoelectronics
List of articles:
Pos.
Product name
Bestell-Nr.
Anz.
238 LED, infrared for use as waveguide transmitter, housingPS4-1
PS4123-5H
1
239 LDR resistor, housing PS4-1
PS4123-5L
1
Lucas Nülle GmbH
Page 91/127
www.lucas-nuelle.com
240 Si photoelement, housing PS4-1
PS4123-5P
1
241 Si photodiode, housing PS4-1
PS4123-5S
1
242 Si phototransistor,housing PS4-1
PS4123-5T
1
243 Optocoupler, housing PS4-2
PS4123-6G
1
PS4123-6J
1
Universeller Optokoppler für Versuche zur Optoelektronik
Ein- und Ausgänge auf 4 Stück vergoldeter Lamellenstecker
Typ: PC817
Eingang: max. 50 mA
Ausgang: Collektor-Emitter Spannung max. 30V / 50mA
244 Waveguide, housing PS4-1
Set Lichtwellenleiter, bestehend aus zwei Steckbausteinen (Haltern)
und 1m LWL (Glasfaserkabel) zur Einspeisung von Licht in den
Lichtwellenleiter für Versuche zur Optoelektronik
Lichtwellenleiter (Glasfaserkabel), Länge 1m
2 x Steckbaustein mit Lichtwellenleiterhalterung
Lucas Nülle GmbH
Page 92/127
www.lucas-nuelle.com
245 Variable light source, housing PS4-3
PS4123-6M
1
Steckbaustein mit seitlich angebrachter, in der Helligkeit
einstellbarer Glühlampe für Versuche zur Optoelektronik
Glühlampe 12V, 0,1A
Potentiometer 470 Ohm / 2W
Quartz
Quartz
List of articles:
Pos.
Product name
Bestell-Nr.
246 Quartz crystal, 1MHz, housing PS4-1
Lucas Nülle GmbH
PS4122-9U
Page 93/127
Anz.
1
www.lucas-nuelle.com
Digital technology
Digital technology
List of articles:
Pos.
Product name
Bestell-Nr.
247 Driver/NOT gate, housing PS4-3
PS4125-2N
Anz.
1
Digitaltechnik Baustein zum Einsatz als Treiber oder NICHT-Glied
4 Inverter mit je einem Eingang und je einem invertierenden
und nicht invertierenden Ausgang
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
Lucas Nülle GmbH
Page 94/127
www.lucas-nuelle.com
248 IC adapter, 16 pins, housing PS4-3
PS4125-2Y
1
PS4125-3A
1
PS4125-3C
1
IC-Adapter 16polig zur Erweiterung des Stecksystems mit
beliebigen Integrierten Schaltkreisen
Alle 16 IC-Pins werden auf 2mm-Buchsen herrausgeführt
Arretierungshebel zum Feststellen der ICs
Bestück mit einem 3M-Textool-ZIF-Sockel
249 4-bit input, housing PS4-3
Entprellter 4-Bit Eingabe Baustein
4 entprellte Eingänge, jeweils mit invertierendem und
nichtinvertierendem Ausgang
Eingänge/Bits einzeln über Schalter setz- bzw. rücksetzbar
Ausgänge auf dem Gehäuse, zugänglich über 2mm Buchsen
Versorgungsspannung 5V über 4mm Lamellenstecker
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
250 AND/NAND gates, 4 inputs, 2-fold, housing PS4-3
Digitalbaustein mit 2 AND/NAND Gattern
Je 4 Eingänge pro Gatter
Je ein nichtinvertierender und invertierender Ausgang pro
Gatter
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
Lucas Nülle GmbH
Page 95/127
www.lucas-nuelle.com
251 OR/NOR gates, 4 inputs, 2-fold, housing PS4-3
PS4125-3D
1
PS4125-3E
1
PS4125-3H
1
Digitalbaustein mit 2 OR/NOR Gattern
Je 4 Eingänge pro Gatter
Je ein nichtinvertierender und invertierender Ausgang pro
Gatter
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel am Ausgang über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
252 AND/NAND gate, 2 inputs,4-fold, housing PS4-3
Digitalbaustein mit 4 AND/NAND Gattern
Je 2 Eingänge pro Gatter
Je ein nichtinvertierender und invertierender Ausgang pro
Gatter
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
253 OR/NOR gate, 2 inputs, 4-fold, housing PS4-3
Digitalbaustein mit 4 Stück OR/NOR Gattern
Je 2 Eingänge pro Gatter
Je ein nichtinvertierender und invertierender Ausgang pro
Gatter
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
Lucas Nülle GmbH
Page 96/127
www.lucas-nuelle.com
254 XOR/XNOR gate, 2 inputs, 4-fold, housing PS4-3
PS4125-3J
1
PS4125-3M
1
PS4125-3N
1
Digitalbaustein mit 4 Stück XOR/XNOR Gattern
Je 2 Eingänge pro Gatter
Je ein nichtinvertierender und invertierender Ausgang pro
Gatter
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
255 JK master-slave flip-flop, 2-fold, housing PS4-3
Digitalbaustein mit 2 Stück JK Master Slave Flip-Flops
Zweiflankengesteuertes Flip-Flop setzt den Master bei
ansteigender, oder abfallender Taktflanke
Eingänge: J und K, Set (setzen) und Clock (Takt) invertiert
Je ein nichtinvertierender und invertierender Ausgang pro
Flip-Flop
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
256 JK flip-flop, 2-fold, housing PS4-3
Digitalbaustein mit 2 Stück JK Flip-Flops
Clock-Eingang kann für steigende Flanken oder für fallende
Flanken betrieben werden
Eingänge: J und K, Set (setzen) und Clock (Takt) invertiert
Je ein nichtinvertierender und invertierender Ausgang pro
Gatter
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
Lucas Nülle GmbH
Page 97/127
www.lucas-nuelle.com
257 Counter, 4-bit, housing PS4-3
PS4125-3P
1
PS4125-3Q
1
PS4125-3T
1
Cascadierbarer 4-Bit Binärzähler mit Übertrag und Untertrag
Zählfolge von natürlichen Zahlen von 0 bis 15 (4 Bit)
Ausgabe im Dual-System
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
258 AND/OR/NOT gates, housing PS4-3
Digitaler Baustein mit UND / ODER / NICHT Gatter-Kombination
Je 2 UND-Gatter kombiniert mit einem ODER-Gatter
2 Eingänge je UND-Gatter (4 je Kombination)
Nichtinvrtierender und invertierender Ausgang je Kombination
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
259 Multiplexer, 1 of 4, housing PS4-3
4 Bit-Multiplexer für multifunktionale Nutzungsmöglichkeieten
Mehrere ankommenden Signale (4 Bit) werden zeitlich
nacheinander auf den Ausgang übergeben.
Nichtinvrtierender und invertierender Ausgang
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Multifunktionale Nutzungsmöglichkeiten
Lucas Nülle GmbH
Page 98/127
www.lucas-nuelle.com
260 Shift register, 4-bit, 2-fold, housing PS4-3
PS4125-3U
1
PS4125-3V
1
PS4125-3W
1
4 Bit-Schieberegister zur Verwendung z.B. als Pufferspeicher oder
Binär-Multiplizierer
Mit Reset-Eingang (invertiert)
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Verwendung z.B. als Pufferspeicher oder Binär-Multiplizierer
261 Latch, 4-bit, housing PS4-3
4 Bit-Auffangregister zum Übernehmen und Speichern von Daten
aus anderen Flip-Flops (z.B. Schieberegister)
Aufnahme von Daten bei High-Pegel
Speichern von Daten bei Low-Pegel
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Verwendung z.B. als Pufferspeicher oder Binär-Multiplizierer
262 Adder, 4-bit, housing PS4-3
Kaskadierbarer 4 Bit-Addierer mit Übertrag
Volladierer mit C IN (Wert einladen) und C OUT (Wert
übergeben)
Addieren von 3 Binärzahlen
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Verwendung z.B. als Pufferspeicher oder Binär-Multiplizierer
Lucas Nülle GmbH
Page 99/127
www.lucas-nuelle.com
263 Buffer, 4-bit, tri-state, housing PS4-3
PS4125-3Y
1
264 Display, 7-segment,housing PS4-3
PS4125-4A
1
PS4125-4B
1
7-Segment-LED-Anzeige mit HEX-7-Segment-Decodierer
8 LED für 7 x Segment und 1 x Punkt
Eingangwert als Hex-Code
Mit RBI (Ripple Blanking Input) und RBO (Ripple Blanking
Output)
zum Dunkelschalten führender Nullen (in- und output werden
verbunden)
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung über 7-Segment-LED-Anzeige
Versorgungsspannung 5V über 4mm Lamellenstecker
265 Monoflop, 2-fold, housing PS4-3
Zwei unterschiedliche monostabile Kippstufen (Monoflops) in einem
Baustein
Monoflop 1: Flankentakt über Taster auslösbar
Monoflop 2: Flankentakt über Poti einstellbar
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
Lucas Nülle GmbH
Page 100/127
www.lucas-nuelle.com
266 Clock generator, housing PS4-3
PS4125-4G
1
PS4125-5A
1
PS4125-5B
1
Quarzstabiler Taktgenerator mit Teiler
Taktfrequenz 100kHz
Teilbar auf 1Hz, 10Hz und 1kHz
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Visualisierung High-Pegel an den Ausgängen über optische
Anzeige (LED)
Versorgungsspannung 5V über 4mm Lamellenstecker
267 Multiplexer, 1 of 8, housing PS4-3
8 Bit-Multiplexer mit multifunktionalen Nutzungsmöglichkeiten
Mehrere ankommenden Signale (8 Bit) werden zeitlich
nacheinander auf den Ausgang übergeben
Nichtinvertierender und invertierender Ausgang
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Versorgungsspannung 5V über 4mm Lamellenstecker
268 Demultiplexer, 8 of 1, housing PS4-3
8 Bit-Multiplexer mit multifunktionalen Nutzungsmöglichkeiten
Ein ankommendes Signal wird in Einzelsignale (8 Bit)
decodiert
Nichtinvertierender und invertierender Ausgang
Nutzung z.B. Decodierung von mehreren Signalen
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Versorgungsspannung 5V über 4mm Lamellenstecker
Lucas Nülle GmbH
Page 101/127
www.lucas-nuelle.com
269 A/D converter with 8-bit resolution, housing PS4-3
PS4125-5C
1
PS4125-5D
1
8 BIT Analog/Digital-Wandler (Umsetzer)
Wandelt analoge Siganale in digitale Daten
Auflösung 8 Bit
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Versorgungsspannung 5V über 4mm Lamellenstecker
270 D/A converter with 8-bit resolution, housing PS4-3
8 BIT Digital/Analog-Wandler (Umsetzer)
Wandelt digitale Daten in analoge Siganale
Auflösung 8 Bit
Ein- und Ausgänge auf dem Gehäuse, zugänglich über 2mm
Buchsen
Versorgungsspannung 5V über 4mm Lamellenstecker
Electro-mechanical components, lamps
Electro-mechanical components, lamps
Lucas Nülle GmbH
Page 102/127
www.lucas-nuelle.com
List of articles:
Pos.
Product name
Bestell-Nr.
Anz.
271 Off switch/single-pole, housing PS4-1
PS4123-7A
1
272 On-off push-button/single-pole, housingPS4-1
PS4123-7B
1
273 Changeover switch/2-pole, housing PS4-3
PS4123-7F
1
Lucas Nülle GmbH
Page 103/127
www.lucas-nuelle.com
274 Changeover switch/single-pole, housing PS4-2
PS4123-7G
1
275 DLR relay, exciter 15V, housing PS4-2
PS4123-7P
1
276 Relay, exciter 8-21V, housing PS4-3
PS4123-7T
1
277 Lamp, green, 6.3V, housing PS4-1
PS4123-8B
1
278 Lamp, red, 6.3V / 100mA, housing PS4-1
PS4123-8C
1
Lucas Nülle GmbH
Page 104/127
www.lucas-nuelle.com
279 Lamp socket, E10, housing PS4-1
PS4123-8P
1
280 Filament lamp, 6V/180mA, E10
SO5123-8Q
1
281 Filament lamp, 15V/100mA, E10
SO5123-8R
1
282 Filament lamp, 24V/80mA, E10
SO5123-8S
1
Lucas Nülle GmbH
Page 105/127
www.lucas-nuelle.com
283 Speaker, 32ohm, 0.4W, housing PS4-3
PS4124-2M
1
284 Moving coil galvanometer, 1mA, housing PS4-3
PS4124-2U
1
Empty housings
Empty housings
List of articles:
Pos.
Product name
Bestell-Nr.
285 Set of empty PS4-1 housings
PS4124-6A
Anz.
1
Satz Leergehäuse zum Aufbau eigener Steckbausteine mit
zweipoligen Bauteilen
Größe: PS4-1
Material: durchsichtiger Kunststoff mit einer weißen
Kappe
Unterteil mit vergossenen 2 Stück vergoldeten 4-mmLamellensteckern
Oberteil zum Einrasten auf das Unterteil
Maße: 17 x 36 x 36 mm (BxTxH)
Lucas Nülle GmbH
Page 106/127
www.lucas-nuelle.com
286 Set of empty PS4-2 housings
PS4124-6B
1
PS4124-6C
1
PS4124-6D
1
Satz Leergehäuse zum Aufbau eigener Steckbausteine mit
größeren Bauteilen oder Bauteilen mit max. 4 Anschlüssen
Größe: PS4-2
Material: durchsichtiger Kunststoff mit einer weißen
Kappe
Unterteil mit vergossenen 4 Stück vergoldeten 4-mmLamellensteckern
Oberteil zum Einrasten auf das Unterteil
Maße: 36 x 36 x 36 mm (BxTxH)
287 Set of empty PS4-3 housings
Satz Leergehäuse zum Aufbau eigener Steckbausteine mit
großen Bauteilen oder Bauteilen mit mehreren Anschlüssen
Größe: PS4-3
Material: durchsichtiger Kunststoff mit einer weißen
Kappe
Unterteil mit vergossenen 6 Stück vergoldeten 4-mmLamellensteckern
Oberteil zum Einrasten auf das Unterteil
Maße: 53 x 36 x 36 mm (BxTxH)
288 Set of empty PSA4-2 housings
Set bestehend aus:
Gehäuse Metall schwarz lackiert (Kühlkörper)
Maße ca: (HxBxT) 35x36x36mm
mit 4x4mm Kontakt-Steckern vergoldet
Kontaktabstand jeweils 19x19mm
zur Selbstmontage (4mm Stecksysteme)
Lucas Nülle GmbH
Page 107/127
www.lucas-nuelle.com
289 Set of empty PSA4-3 housings
PS4124-6E
1
Set bestehend aus:
Gehäuse Metall schwarz lackiert (Kühlkörper)
Maße ca: (HxBxT) 35x54x36mm
mit 2x4mm Kontakt-Steckern vergoldet
Kontaktabstand 38mm
zur Selbstmontage (4mm Stecksysteme)
EloTrain plug-in boards
EloTrain plug-in boards
Plug-in board for both 4-mm and 2-mm plug-in component systems for building your own experiments in highly
compact circuits using-plug-in modules. Various sizes of component mean that easily understood circuit
layouts can be assembled with components at various distances apart.
Lucas Nülle GmbH
Page 108/127
www.lucas-nuelle.com
List of articles:
Pos.
Product name
Bestell-Nr.
290 EloTrain plug-in board 2/4mm, 120 nodes
Anz.
CO3535-5H
1
Plug-in panel for components with 4mm or 2mm plugs, for the
assembly of highly compact electrical, electronic or digital circuits
using plug-in components. A grid of 120 nodes allows for clear
assembly of circuits even when components are packed densely
together. Circuits are assembled by plugging in components
between nodes. Connections can be made between nodes using
2mm/7.5mm jumpers.
Suitable for 4mm plug-in components und 2mm plug-in
components
Suitable for DigiTrain system components
100 nodes featuring 4 x 2mm sockets and 1 x 4mm socket
20 nodes featuring 3 x 2mm sockets and 1 x 4mm socket
19mm grid for 4mm sockets, 7.5mm grid for 2mm sockets
Four power supply or bus rails each with 12 x 2 mm sockets
and 12 x 4 mm sockets
Ergonomically optimised thanks to console housing
For mounting in panel mounting frames or experiment case
Max. permissible contact current 10A
WxHxD 228 x 297 x 100mm
Lucas Nülle GmbH
Page 109/127
www.lucas-nuelle.com
291 EloTrain plug-in board 4mm safety sockets, 30 knots (DIN A4)
CO3535-5X
1
PS4200-3A
1
Universal plug-in board for the EloTrain plug-in module system, for
rapid and clear experiment set-ups using connectable module
components including 19-mm rastered grid and 4-mm pin
connectors. The circuit assembly is realised by inserting connectable
component modules between the node points. Conductive
connections between the nodes are established with 4-mm/19-mm
connection plugs.
30 nodes, each equipped with four 4-mm safety sockets
4 power supply bus lines, each with six 4-mm safety sockets
Cascadable (several patch panels can be connected up to
form one large panel)
19-mm rastered grid with 4-mm sockets
Conductive paths realised and depicted using 4-mm bridging
plugs
Can be suspended in H-type panel frames
Contact load capacity: max. 10A
Contact resistance: max. 4x10-3 Ohm
WxHxD 228 x 297 x 100 mm
292 EloTrain storage board for 4-mm plug-in components
Storage board for 4-mm plug-in components
For up to 112 4-mm plug-in components
Dimensions: 456 x 297 x 100 mm (WxHxD)
Depth with plug-components 150mm
Lucas Nülle GmbH
Page 110/127
www.lucas-nuelle.com
EloTrain power supplies
EloTrain power supplies
Multi-functional, compact power supply plus function generator and three-phase supply for all basic and
advanced experiments in the areas of electrical engineering, electronics and digital technology. The equipment
is available in the form of a desk-top unit or for mounting in a 3HU power supply duct.
Lucas Nülle GmbH
Page 111/127
www.lucas-nuelle.com
List of articles:
Pos.
Product name
Bestell-Nr.
293 Multi Power Supply 4x DC, 2x AC, 3-phase, function generator
Anz.
CO3538-8M
1
Multifunctional, compact power supply including function generator
and three-phase source, suitable for any basic or advanced
experiments in the fields of electrical engineering, electronics and
digital electronics. It can be operated as desktop device or mounted
in an experiment frame. The power supply has protective isolation
and provides safety extra-low voltage in compliance with EN 61010. A
standard 230-V plug is enough to connect it up. All outputs have selfresetting circuit breakers to cut off the power safely in the event of a
current overload. The equipment is maintenance-free and especially
suited for use by beginners. Modern power supply technology allows
for low power consumption and reduced power loss.
Stabilised fixed voltages, +15 V, -15 V, both 1 A
Stabilised fixed voltage, +5 V, 1 A
Stabilised fixed voltage for vehicles, 12 V, 1 A
Stabilised adjustable voltage, 0 ... 30 V, 1 A with adjustable
current limitation
AC voltages, 12V, 24V, both 200 mA, 50 Hz
Three-phase generator with 3 phases and N
Amplitude 3 x 7/12 V
Output current max. 3 x 200 mA,
Frequency 1 Hz or 50 Hz
Function generator
0.1 Hz ... 1 MHz in 5 ranges
Output signals: sine-wave, triangle, square-wave,
digital
Output voltage: -10 V ... 0 ... 10 V
Output with attenuator: 10:1
Output current max.: 200 mA
Short-circuit-proof or with self-resetting circuit breakers on all
outputs
6 Buttons for various functions
17 LEDs for use as status signal lights
2 LCD displays with blue illumination
Display of DC voltage, current and current limitation
Display of AC voltage and frequency
USB port so that voltage sources can be controlled by
computer
Illuminated mains switch
Experiment board with console housing
Dimensions: 297 mm x 228 mm x 100 mm
Weight: 3.5 kg
Lucas Nülle GmbH
Page 112/127
www.lucas-nuelle.com
294 Multi-function power supply: DC, AC, 3-phase,function generator,
60PU
ST8008-6K
1
Multifunctional compact power supply including function generator
and three-phase source, suitable for any basic or advanced
experiments in the fields of electrical engineering, electronics and
digital technology. The power supply has protective isolation and
provides safety extra-low voltages in compliance with EN 61010. All
outputs have self-resetting circuit breakers to cut off the power safely
in the event of a current overload. The equipment is maintenancefree and especially suited for use by beginners. Modern switchedmode power supply technology allows for low power consumption
and reduces power.
Stabilised fixed voltages, +15V, -15V, both 1A
Stabilised fixed voltage, +5V,1A
Stabilised fixed voltage for vehicles, 12V, 1A
Stabilised adjustable voltage, 0 ... 30V, 1 A
AC voltages, 12V, 24V, both 200mA, 50 Hz
Three-phase generator with 3 phases and N
Amplitude 3 x 7/12V
Output current max. 3 x 200 mA,
Frequency 1Hz or 50Hz
Function generator
0.1 Hz ... 500kHz in 5 ranges
Output signals: sine-wave, triangle, square-wave,
digital
Output voltage - 10V...0 ... 10V
Output with attenuator: 10:1
Output current max.: 200mA
Short-circuit-proof or with self-resetting circuit breakers on all
outputs
5 buttons for various functions
17 LEDs for use as signal lights
Illuminated mains switch
Dimensions: 3HU/60PU
Lucas Nülle GmbH
Page 113/127
www.lucas-nuelle.com
295 Table-top housing for 60 PU inserts incl. connection for nonheating components
ST8008-7K
1
3HU table-top housing, 230 V
Including low-power connector for non-heating apparatus
Housing made of aluminium profiles
Fold-away stand
Fitting for attaching 3HU modules
Width of insert 60PU
EloTrain media
EloTrain media
High-quality, colour-printed manual bound with a strong spine and containing solutions.
Includes:
High-quality printed teachers’ section
CD-ROM with additional student workbook
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Colour printed on 100-g/m² Color-Copy paper with cover in 210 g/m² glossy paper
Lucas Nülle GmbH
Page 114/127
www.lucas-nuelle.com
List of articles:
Pos.
Product name
Bestell-Nr.
296 Manual, EloTrain: Direct current
SH5002-7B
Anz.
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Assembly of simple circuits
Use of voltmeters and ammeters.
Ohm’s law
Series and parallel connection of resistors
Voltage dividers with and without loads
Light bulb characteristics
Voltage dependent resistors (VDRs)
Negative temperature coefficient thermistors (NTCs)
Positive temperature coefficient thermistors (PTCs)
Light-dependent resistors (LDRs)
Capacitors in DC circuits
Relay circuits
Lucas Nülle GmbH
Page 115/127
www.lucas-nuelle.com
297 Manual, EloTrain: AC and three-phase current
SH5002-7D
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Generating AC
Characteristics of AC
Resistors in AC circuits
Capacitors in AC circuits
Series and parallel connections of resistors and
capacitors (RC)
Coils (inductors) in AC circuits
Series and parallel connections of resistors and inductors
(RL)
Series and parallel connections of resistors, inductors and
capacitors (RLC)
Series and parallel compensation
Transformers with and without loads
Three-phase networks
Star circuit with symmetric/asymmetric loads
Delta circuit with symmetric/asymmetric loads
Lucas Nülle GmbH
Page 116/127
www.lucas-nuelle.com
298 Manual, EloTrain: Semiconductor components
SH5002-7H
1
SH5002-7J
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Diodes in DC and AC circuits
Half-wave and bridge rectifiers with smoothing
Displaying diode characteristics on an oscilloscope
Light-emitting diodes
Diode-like characteristics of transistor junctions
Input, output and control characteristics of transistors
Transistors in common emitter, common collector and
common base circuits
Transistors used as switches
Transistors used as delay switches
Characteristics of field effect transistors (FETs)
FETs used as controllable resistors and switches
FET characteristic
Dimmer sensor using a FET
Characteristics of diacs, thyristors and triacs
Thyristors used as switches
Phase control using triacs and diacs
Characteristics of unijunction transistors (UJTs)
Pulse emitter using a UJT
299 Manual, EloTrain: Basic electronic circuits
Lucas Nülle GmbH
Page 117/127
www.lucas-nuelle.com
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Basic amplifier circuits using bipolar transistors
Basic amplifier circuits using field effect transistors (FETs)
Two-stage AC amplifier
Darlington pair amplifier
Coupled emitter amplifiers
Phase reversing stages
Differential amplifiers
Two-stage DC amplifier with complementary transistors
Push-pull amplifiers
Positive and negative feedback
Square-wave generators
Threshold switches (Schmitt triggers)
Astable multivibrators
Monostable multivibrators
Bistable multivibrators (flip-flops)
Saw tooth generators (pulse generators)
Sine-wave generators with RC and LC elements
Amplitude modulators and demodulators
Frequency modulators
Single-phase and three-phase rectifier circuits
Voltage multipliers
Stabilising circuits
Voltage and current regulators (linear)
Lucas Nülle GmbH
Page 118/127
www.lucas-nuelle.com
Switched-mode voltage regulators
DC converters
Pulse generation using unijunction transistors
Phase control using thyristors
Phase control using triacs
Full-wave control with zero-voltage switch
DC voltage switch using thyristors
Using op amps as inverting amplifiers
Using op amps as non-inverting amplifiers
Using op amps as differential amplifiers
Dynamic response of operational amplifiers (op amps)
300 Manual, EloTrain: Optoelectronics
SH5002-7K
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Parameters and characteristics of light-emitting diodes
(LEDs)
Control of LEDs
Infra-red LEDs
Photodetectors
Photodiodes
Phototransistors
Transmitting signals using photodiodes and
phototransistors
Optocouplers
Optical fibres
Lucas Nülle GmbH
Page 119/127
www.lucas-nuelle.com
301 Manual: EloTrain Introduction to digital technology
SH5002-8B
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
NOT function, AND and NAND gates
OR and NOR gates
Antivalence (XOR) and equivalence (XNOR)
Half adders and full adders
Subtracting circuits
Code conversion
RS-NOR flip-flops
Clocked RS flip-flops
Static and dynamic D flip-flops
JK flip-flops
JK master-slave flip-flops
Flip-flop applications
Lucas Nülle GmbH
Page 120/127
www.lucas-nuelle.com
302 Manual, EloTrain: Sequential circuits
SH5002-8D
1
SH5005-1V
1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Display of binary numbers on LEDs and LED displays
Asynchronous 4-bit counter
Synchronous counter
Decimal counter
Counters for special codes
Divider circuits (pre-scalers)
Registers and shift registers
Serial and parallel data exchange
Multiplexers and demultiplexers
303 Manual, EloTrain: Fundamentals of elec. eng./electronics in
vehicles 1
High-quality, bound, colour teachers’ manual with rigid spine,
including solutions. CD-ROM with additional students’ manual,
including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m² colour copy paper, book
cover on 210-g/m² glossy paper
Training contents:
Lucas Nülle GmbH
Page 121/127
www.lucas-nuelle.com
The plug-in component system
Plug-in components
Multi power supply
The atom
Positive and negative electrical charges
Metallic conductors
Electric voltage
Voltage generation
Voltage measurement
Electric current
Measuring electric power
Measuring current
Resistance
Measuring resistance
Current types
Circuit symbols
Circuit diagrams
Block diagrams
Connection diagrams
Wiring diagrams
Conversion factors
Conversion exercises
Voltage drop
Ohm’s law
Calculation exercises based on Ohm’s law
Sample solutions of calculation exercises
Series connection of resistors
Measuring series connections
Calculation exercises based on series connections
Sample solutions for computing exercises
Parallel connection of resistors
Measurements on parallel circuit connections
Conductance
Calculation exercises based on parallel circuit connections
Sample solutions for computing exercises
Mixed circuitry
Lucas Nülle GmbH
Page 122/127
www.lucas-nuelle.com
Measurements on mixed circuitry
Calculation exercises based on mixed circuitry
Sample solutions for computing exercises
EloTrain Accessories:
EloTrain Accessories:
List of articles:
Pos.
Product name
Bestell-Nr.
304 Max 10 digital multimeter
LM2332
Anz.
2
Universal and easy-to-use laboratory multimeter for measurement
and testing in educational settings, power plants, process control
installations etc.
3¾-digit multimeter; resolution: ±4 000 Digits
Measurement classification CATII - 600V / CATIII - 300V
Voltage and current measuring ranges: 400mV–
1000V DC, 400mV–1000V AC; 40µA–10A DC; 40µA10A AC
Measurement ranges: 100mohm-40Mohm
Capacitance measuring range 1pF to 200µF
Frequency measuring range 0.001Hz to 500kHz
Duty cycle measurements
Continuity and diode testing
Automatic range selection and battery shut-off, min./max.
and data hold function
Includes protective sleeve, measuring leads and battery
Lucas Nülle GmbH
Page 123/127
www.lucas-nuelle.com
305 Digital dual trace storage oscilloscope w. colour display, incl.
probes 30MHz
LM6210
1
LM9032
2
Digital storage oscilloscope with colour LCD display, high resolution,
backlighting and USB port for transmission of large quantities of data
at high data rates.
Technical data:
Bandwidth 30MHz/125MS/s
Maximum input voltage 400V
8" TFT colour display
USB port, USB flash disk, LAN, VGA
Cursor function
Five automatic measurement functions, storage and retrieval
of traces
Edge and video trigger function
Safety specifications: EN 61010-1
Supplied with accessories: 2 probes, mains lead, USB cable,
software CD
Dimensions: 350x157x120mm (WxHxD)
Weight: 1.0kg
306 Test lead, BNC/2x 4mm plug, 1.5m
Coaxial test cable with BNC connector at one end and two banana
plugs at the other.
Terminations: BNC female (socket) and 2x 4mm plugs
Dimensions: 1.5m
Lucas Nülle GmbH
Page 124/127
www.lucas-nuelle.com
307 EloTrain case to hold DIN A4 boards for storing plug-in
components
SO5127-3L
1
SO5127-3B
1
Handy aluminium profile case with handle and removable lid for
storing a complete experiment system with 4mm and/or 2mm plug-in
components.
Capable of accommodating a power supply and universal
plug-in board both measuring 228mm in width
Capable of accommodating more than 100 plug-in
components in the lid
Locking compartment for small parts and experiment leads
Closable locks with strong hinges
Colours: plain aluminium, black, chrome
Dimensions: 600 x 320 x 200mm
Weight: 3kg
308 EloTrain case to hold 2 DIN A4 boards, power supply and for
storing plug-in components
Handy aluminium profile case with handle and removable lid for
storing a complete experiment system with 4mm and/or 2mm plug-in
components, incl. a printed storage panel for the accommodation of
the EloTrain basic equipment set, the automotive equipment set or
additional component sets to be integrated into the removable lid.
Capable of accommodating a power supply and universal
plug-in board both measuring 456mm in width
Capable of accommodating more than 100 plug-in
components in the lid
Locking compartment for small parts and experiment leads
Closable locks with strong hinges
Colours: plain aluminium, black, chrome
Dimensions: 820 x 320 x 200mm
Weight: 3kg
Lucas Nülle GmbH
Page 125/127
www.lucas-nuelle.com
309 Connection plugs 2mm/7,5mm, black, gold plated
SO5124-6F
1
SO5124-6E
1
Connection plugs 2mm/7.5mm, black, gold-plated contacts
Jumpers for setting up experiments on universal plug-in boards,
connecting nodes and making links.
Durable laminated plugs with reliable contacts
Gold-plated contacts
Distance between contacts 7.5mm
Diameter of contacts 2mm
Max. 50V, 10A
310 Connection plugs 4mm/19mm, black
Jumpers for setting up experiments using safety extra low voltage
Durable laminated plugs with relaiable contacts
Gold-plated contacts
Distance between contacts 19mm
Diameter of contacts 4mm
Max. 50V, 30A
Lucas Nülle GmbH
Page 126/127
www.lucas-nuelle.com