BasePac 8 Functions Table - gis

x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Print & Statistics
x
Editor
x
Punch 2
x
Punch 1
x
ACE
MfM Monogram
x
Monogram
BasePac ACE
File-Functions
Open a new or existing design
Store the design on any drive under windows
Store design anew with another version number
EPC-connection (Reading and writing of designs in the
ZSK EPC via network)
Store designs to ZSK embroidery machine memory
Connecting right to ZSK and Toyota embroidery
machines
Import of existing designs to current designs
Sending designs with E-Mail
BasePac SE
Design administration
Sorted in folders
Design entry with design number, name, customer’s
name, no. of stitches, type and date
Pictogram directory
Delete, copy and move designs
Design header
Histogram of machine functions
Search function, for all design entries individually or
according to independent criteria
Thread consumption table for all needles
Reading and Writing of a large variety of disc formats
Code-conversion from/to all existent multihead stitch
data format
Backup/Restore function, the designs remain in the
directories
Replacing stop with needle change function in stitch data
designs
Assign the original thread color to the needles
Set up design collection
BasePac 8
BasePac 8
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 1 of 11
Editing designs
Multi Undo / Redo with adjustable step count for all
functions
Moving designs
Scale up/down designs without density compensation
(centered, proportional, independent)
Scale up/down designs with density compensation
Rotate/slant design
All functions can be set numerically or graphically
Frame library. Frames with variable boldness and density
Store standard-parameters for frames
Define your own frames
Fill frames from library with fill stitches
Copy and insert of designs from the clipboard
Open several designs at the same time
Open several windows of the same design (also in
different zoom levels)
Select zoom level independently, with zoom factor or
fitting design/block to screen
Permanent display of design size, no. of stitches, zoom
level and cursor position
Display of start- and endpoint. Also possibility to define
start-/endpoint
Print & Statistics
x
Editor
x
Punch 2
x
Punch 1
x
x
ACE
x
x
Monogram
BasePac ACE
x
x
MfM Monogram
BasePac SE
Print functions
Print out designs
Best adjusting of the design to page size
Printing with realistic thread colors which can be selected
from a color-table
Printing large designs on several pages
Free positioning the design on the page
Printing of thread consumption table
Printing of design header
Printing of comment
Printing histogram of special functions
True View – realistic view of the design in single print
mode
Printing design catalogue
True View – realistic view of designs in catalogue mode
Fade in fabric designs in the background
Print as Repeat view for multihead designs with single
head selection
BasePac 8
BasePac 8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 2 of 11
Edit blocks
Create blocks at current stitch position
Create blocks automatically
Connect all blocks
Delete blocks
Move/shift blocks
Scale up/down blocks without density compensation for
stitch data
Scale up/down blocks with density compensation for
stitch data
Scale up/down blocks including recalculation based on
coordinate data
Rotate/slant blocks
Copy blocks
Copy block with 3-point copy feature
Block selection with film strip
Center blocks
Embroider block backwards
Group/ungroup blocks
Change order of embroidery block by block
Block structure is stored with the design
Standardize block
Duplicate block with self-defined shift vector
Fading out blocks
Set trimming, stops or needle changes at the beginning
of a block
x
x
x
x
x
x
Print & Statistics
x
Editor
x
Punch 2
x
Punch 1
x
ACE
x
x
Monogram
MfM Monogram
x
x
x
x
x
x
x
x
x
x
x
x
BasePac SE
BasePac ACE
Edit stitches
Delete/ insert of single stitches
Moving/shifting of stitches
Insert of double stitches
Search for stitch number
Search for stitches with a certain length
Search for machine functions
Delete/ Insert of machine functions
Display of machine functions graphically, selectable by
choice
Cleaning (sum up small stitches)
Optimize (sum up jump stitches)
Alphanumerical stitch display
Recalculation of the design
Satin stitch correction
Changing stitch division
BasePac 8
BasePac 8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 3 of 11
TrueType Font Editor
Create a font from a Picture
Editing the single outline points
Editing the stitch directions
Changing the contour cuts
Changing header and trailer spacing
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Print & Statistics
x
Editor
x
x
Punch 2
x
Punch 1
x
x
ACE
x
x
Monogram
BasePac ACE
MfM Monogram
BasePac SE
Monogram
2 fonts (GiS Swiss and GiS Swiss small)
128 fonts
Import of TrueType fonts
Free choice of filling of TrueType fonts or bordering with
satin or running stitches.
Closest point or any connection with TT fonts
Free tack and lock stitches at TrueType fonts
TT-Editor for modifying the fonts
All fonts with any kind of size, boldness and slant angle
Any density you like
Zigzag, centerline or contour under layers
Multi line input of text, left-/center- or right-aligned
Various division modes: Center, regular or irregular
Thread trimming/ lock stitches by choice
Input of text in original size directly at desired position
Mark and overwrite words with constant parameters
Scale up/down, rotate, slant text with box function or
numerically
Place text on straight lines, circles or any kind of curve
with the facility to adjust letter -size, -width and distance
Writing and editing text directly on curves
Shifting the text along the curve
Shifting of single letters along the curve
Shifting a text beginning with a certain letter
Selectable distance from the curve
Writing on, above and below the curve
Letters vertical on the curve ( stairs)
Envelope-function with edit facilities
Parameters for standard fonts can be stored
Center text to frame
Changing order of embroidery for text and frames
Duplicate text and frames with self defined shift vector
Convert text to stitch data
Convert text into reference data
Editing the reference data of the letters
Filling letters with stencils or macros
BasePac 8
BasePac 8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 4 of 11
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
ACE
Import of pixel designs and .emf-files
Optimizing the pixel data
Transforming into vector data
Automatically transforming into punch data and
calculating stitches
Use the optimized data as background picture
Use the vector data as drawing lines
Changing the order of embroidery
Modification of all parameter
Automatic Under layer
Filling of colored drawing areas with step or satin stitches
Calculating a Stepp stitch or satin line on a drawing line
in the drawn color
Drawing
Self defined curves or straight lines with/without corner
attribute
Edit a curve point
Shifting the complete curve
Shifting a group of curve points
Freehand drawing for artistic work
Define circles by entering center-point and radius
Define circles by entering 3 points
Enter arcs of a circle
assigning individual colors to lines
Create parallel curves
Enter graphic primitives (rectangle ...)
Adopt drawing lines as coordinate data and vice versa
Import of .dxf , .ai, .wmf and .emf-files
Split and connect drawing lines
Group/ungroup lines
Box feature for drawing lines
Convert graphic primitives in drawing lines
Optimizing lines
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Print & Statistics
x
Editor
Monogram
x
Punch 2
MfM Monogram
x
Punch 1
BasePac ACE
x
ACE
BasePac SE
Template
Assistant for production of badges on ribbons and large
frames
Import of the names from a text file
Automatic adjustment of the name’s length
Input of the distance and the order of embroidery of the
single badges in the hoop
Definition of a border and an additional design
Definition of multiple text fields in one template
BasePac 8
BasePac 8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 5 of 11
x
x
x
x
x
x
x
x
Print & Statistics
x
x
x
Editor
x
x
Punch 2
x
x
x
x
x
x
x
x
x
x
x
Punch 1
x
ACE
x
Monogram
BasePac ACE
MfM Monogram
BasePac SE
Punch 1
Punching on-screen
Punching with digitizer
Freehand punching for artistic work
Input modes manual
Pair wise
Center line
Outer contour
Step stitch line
Complex Fill
Satin stitches with outer contour input, automatic
calculation of contour cuts and stitch directions
Predefined stitch calculation modes:
Satin stitch, step stitch with rhythm 1-4, irregular; single
running lines
Variable stitch calculation modes:
choose between stitch division mode center, rhythmic,
irregular, regular
choose between edge mode zigzag, irregular, acute,
obtuse
Shortened Stitches in corners
Curve/ straight line input
Closed curve attribute for smoothening curves
Convert centerline coordinates to pair wise coordinates
Set the outer contour endpoint at any position
Input of holes
Input of any stitch direction
Input of division lines
Set corner attribute by double clicking
Pull compensation
Overlap
Swing on covering stitches
Adjust density ramps according to your needs
Automatic fill under layers with all fill modes, only single
under layers. Input any under layer-distance from outer
contour edge, density and stitch length,
Automatic fill under layers with all fill modes, either single
or double under layers. Input any under layer-distance
from outer contour edge, density, swing, stitch length and
angle relating to cover stitch direction
Automatic contour under layers with any fill mode.
Input any under layer distance from outer contour edge
and stitch length.
Automatic contour under layers with any fill mode.
Input any under layer distance from outer contour edge,
stitch length, swing and order in conjunction with fill
under layers
Centerline input with variable width and variable Stitch
direction
BasePac 8
BasePac 8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 6 of 11
Print & Statistics
Editor
x
x
x
x
x
x
x
Punch 2
x
Punch 1
x
ACE
x
x
Monogram
BasePac ACE
x
x
MfM Monogram
BasePac SE
Punch 1
Single running line
Stitch repeat mode in step stitch lines
Multiple running lines
Enter swing and shift for every pass separately
E-Stitch with variable angle and length
Shortened stitches in curves
Save stitch modes (parameter sets). Access via stitch
mode menu
Clean coordinates
Save self-defined macros
Place macros on running lines
Macro with special functions (e.g.: Sequins) possible
Choose any height and width
Select any distance between macros
Fit macro exactly to the running line length
Definition of design blocks
Alter every coordinate point at any time
Recalculation of the design block wise with different
parameter set.
Recalculation of the design completely or block wise with
a global parameter set.
BasePac 8
BasePac 8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 7 of 11
Punch 2
Stitch division mode by input of an angle
Set the endpoint with centerline or pair wise input mode
at any position
Input of islands
Input of additional contours
Input of any stitch direction
Input of several straight stitch direction lines to create a
turned step stitch
Input of several wavy stitch direction lines
Pair wise or centerline input with branches
Running lines with branches
Pull compensation with branches
Separate density for every stitch direction line in outer
contour input mode in order to create continuous density
changes
Stencil stitch division on areas with complex fill and holes
Select any shifting and size of stencils
Stencil and step division mode can be combined
together, inside, outside, always
Save self-defined stencils
Macro fill on outer contour areas with complex fill and
holes
Height and width of macros adjustable
Macro with special functions (e.g.: Sequins) possible
Mirror and distance between macro lines as you like
Select any shifting of macros
Select any distance between macros
Turned step stitch with complex fill and holes
Wavy step with complex fill and holes
Stencils on turned step areas with complex fill
Stencils on wavy step areas with complex fill
Sequin automatic on lines
Interlocking stitch
Interlocking line automatic creation
Irregular stitch length at running lines
Irregular swing at running lines
Print & Statistics
Editor
Punch 2
Punch 1
ACE
Monogram
MfM Monogram
BasePac ACE
BasePac SE
BasePac 8
BasePac 8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 8 of 11
Background picture
Import bitmap images in various formats
Display/hide background image
Change size of background image via box feature
Change size referring to a part of the image (scaling)
Rotate and slant the background image
Adjust contrast and brightness
Fade out colors of the background image
Auto-Trace
Display features
Show/ hide needles
Show/ hide blocks
Show/ hide coordinates
Display in different colors
Show coordinate points in different sizes
Set coordinates in front of/ behind the stitches
Display only current automatic
Show/ hide stitches
Show/hide stitch in points
Display stitches in different colors
Display text in fill mode with needle color
Display text with stitches
Display text with coordinate data
Horizontal and vertical rulers
Length measurement feature with ruler
Display punch contours as curves
Rubber band feature
Large crosshairs cursor
Display start/endpoint
Draw design with respect to order of embroidery
Display part of the design from stitch no.. to stitch no.
Redraw the design
Choice between 3 color schemes: original design colors,
Display colors, standard colors
Set blocks to the front/ to the back
Adjust all colors as you like: helpline colors, coordinate
True View effect
Repeat view for multihead designs with single head
selection
Repeat grid for multihead designs with single head
selection
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Print & Statistics
Editor
Punch 2
Punch 1
ACE
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Monogram
MfM Monogram
BasePac ACE
BasePac SE
BasePac 8
BasePac 8
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 9 of 11
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Print & Statistics
x
Editor
x
Punch 2
x
Punch 1
MfM Monogram
x
ACE
BasePac ACE
x
Monogram
BasePac SE
User interface
Large worksheet, distinct structure and display of only
those tools which are available at a given time.
Position the toolbar horizontally, vertically or anywhere
within the worksheet
The most important functions are accessible with buttons
Parameter window with preview feature
Select zoom levels numerically or with zoom buttons
Automatic scrolling in insert mode when reaching the end
of the working area
Dragging of horizontal and vertical help lines out of the
rulers
Grid with selectable distance
Select important functions with shortcuts
Online help system
Magister Tutorial Software
Quick start
Monitor scaling in mm
Display buttons small/large
Toolbar, status line, show/ hide ruler
Available languages : German, English, French, Italian,
Portuguese, Spanish, Turkish, Chinese, Hungarian
BasePac 8
BasePac 8
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 10 of 11
BasePac 8
Extended
options
Export Extended
Direct export to different disk formats
Automatic design name creation
Automatic transfer of all pages of a template
Technical embroidery
Conversion of fill are to running lines
Split running lines
combine running lines
Rounded edge
Islands without stitch on the contour
Shiffli Converter
Shiffli Editor
x
x
x
x
x
x
x
x
x
x
x
Technical embroidery
Shiffli Functions
Editing all Shiffli machine functions
Editing repeat pattern with free needle pattern
Input of text in the design
Converting Lässer discs
Converting Hiraoka discs
Converting ZSK-NC discs (Shiffli)
Repeat view
Repeat grid
Checking shiffli designs
Printing shiffli designs (with Print & Statistics)
Shiffli punch (with Punch1)
Export Extended
BasePac 8
Shiffli
x
x
x
x
x
x
x
x
GiS
Gesellschaft
für
Informatik
und
Steuerungstechnik
mbH
Höllochstraße 1 D 73252 Lenningen Tel.07026-606-0 Fax: 07026-606-66 Email: [email protected]
12/12
Page 11 of 11