1-201-391-5300 FAX: 1-201-391-3565

Transcription

INDEX
Dear Valued Customer,
Welcome to the new 2007/2008 catalog from Charles G.G. Schmidt &
Company. This catalog, along with our expert technical staff, will allow you to select
the best possible tooling system available for your application. During our eighty one years of service
to the woodworking industry, we have been the consistent source for the highest quality state-of-the-art
tooling, as well as friendly, knowledgeable technical help for all types of woodworking machines, both
new and old. As we enter our eighty second year, we hold an uncompromising commitment to stay on
the “cutting edge" of the industry, while providing you with the best customer service available. This
includes staying on top of new materials and techniques, continually improving our own manufacturing
processes, while at the same time maintaining our tradition as your problem
solving partner.
Thank you for considering us for your tooling requirements.
President
Index of Pages
CUSTOM TOOLS
What’s available and how to order
2
SHAPER CUTTERS
3-5
Groovers • Tongue & Groove • Lock-Mitre Flooring Sets • Finger
Joints • Staggered Tooth Fence Post Cutters • Panel Raising Cutters
Stile & Rail Cutters for Kitchen Cabinets, Interior & Exterior Doors
WINDOW SASH CUTTERS
6
Window Sash Cutter Sets • Check Rail Cutters
ACCESSORIES
7-8
Bearings • Rub Collars • Bushings • Spacer Sets • Plastic Shims
Custom Shims • Sprayway Products • Space Balls • Glue Release
Honing Cones • Sharpening Stones • Manuals
MANUALS
9
Educational Manuals and Books for the Professional Woodworker
THIN KNIVES FOR PLANERS & JOINTERS
10-11
Carbide Tipped • Solid Carbide • T-1 High Speed • Smooth Back
Bars • Planer Jig • Jointer Jig • Magnetic Knife Setting Gauges
BEVELED EDGE SHAPER STEEL & KNIVES
12
M2 High Speed & XLW Bars • Straight Knives in Steel and Carbide
Tipped
REPLACEMENT KNIVES
13
Tersa, Terminus & Centrolock Replacement Knives
SCHURE • LOCK
14
SCHure • Lock Knife System • Carbide or S-Alloy Tipped Corrugated
Back Knives
CORRUGATED, WILLIAMS & HUSSEY KNIFE STOCK
15
T-1 • XLW • M2 & M3 High Speed Steel • Schmidt Super Steel •Filler
Bars • Williams & Hussey Knives and Bar Stock • Straight Knives for
Planing
SAW BLADES
16-17
Panel Saw Blades • Scoring Saw Blades • Miter & Chop Saw Blades
• Cut Off and Trim Saws Blades • Dado Sets Rip Saw Blades
Glue-Line Rip Saw Blades • Double Faced Laminate Saw Blades
Combination Saw Blades • Solid Surface Saw Blades
GRINDING ROOM SUPPLIES
18
Grinding Wheels • Template Material • Grinding Coolant • Moulder
Bed Lube • Diamond Dressers • Template Material
KNIFE PROFILES
19-26
Crowns • Beds • Coves • Quarter Rounds • Stools • Base Shoes
• Flat Astragals • Base Mouldings/Caps • Brick Moulding • Glass
Beads • Nosing • Panel Mouldings • Chair Rails & Casings
KNIFE PROFILES Cont.
19-26
Shingle Panel Mouldings • Picture Mouldings • Beading & Fluting
Base Mouldings • Stops Bead & Bullnose • Eighth Round • Hand
Rails • Panel & Flooring • Angle & Backout • Victorian Casing
CUTTER HEADS
27-28
The Junior Line • Williams & Hussey Shaper Head • Standard
Moulder & Shaper Heads; 2, 4, 6 Knife Hydro-Lock • Straight Bore
Open-end Sleeves Coping Discs • Grease Guns & Grease
INNOVATORS
29
0XOWLSURÀOH&RUUXJDWHG%DFN3DQHO5DLVLQJ&XWWHU6WDQGDUG
3URÀOHVIRUWKH,QQRYDWRU
ROSETTES
30
0XOWLSURÀOH5RVHWWH&XWWHUV6WDQGDUG3URÀOHVIRU5RVHWWH&XWWHUV
TENONER TOOLING
31
Powermatic 2-A Replacement Knives & Heads • Custom Tenon and
Cope Heads • Spur Knives
HOLLOW MORTISING CHISELS & BITS • PROFILING HEADS 32
+ROORZ0RUWLVLQJ&KLVHOV%LWV0DQXDOV3URÀOLQJ+HDGV
INSERT HEADS
33-36
SCHure-Cut • Surfacing Heads • Tenon Heads • Rebating and
Grooving Cutters • Stackable Surfacing Heads • Adjustable Angle
Cutter • Dedicated Inset Heads • Insert Flooring Cutters
INSERTS
37
5HSODFHPHQW6ROLG&DUELGH,QVHUWV,QGH[LEOH3URÀOHG
CUTTERS
38-39
3DQHO5DLVLQJ,QVHUW6WLOHDQG5DLO3DQHO&UDIWHU3URÀOLQJ)L[WXUH
ROUTER TOOLING & BORING BITS
40-42
Corrugated Back Router Head • Router Bit Adapters • V Groove/
Chamfer Bit • Boring Bits • Solid Carbide Spiral Router Bits
Diamond Tipped Router Bits & T-Slot Cutters • Custom Router Bits
TOOL HOLDERS
43
Tool Holders for CNC Routers • Arbors • Pull Studs
COLLETS
44
ER Precision Collets • ER Coated Nuts
BAND SAW BLADES
45
Carbon Wood Production & General Purpose Band Saw Blades
MACHINES
46-48
Rosette Machine • Williams & Hussey Moulder / Planer • Arc Master
• Feed Master • Steff Power Feeders
LINE CARD
49
Tooling & Machinery Distributed By Charles G.G. Schmidt & Co., Inc.
Technical Assistance & Inquiries: 1-201-391-5300 FAX: 1-201-391-3565
1
CUSTOM TOOLS
A SCHMIDT SPECIALTY
Custom cutting tools have always been a specialty of Schmidt so
we excel at understanding and servicing your unique woodworking
problem. Whether you work with a shaper, moulder, saw, CNC,
router, planer or double end tenoner, we can provide the best tools
to get your job done right. The chart below describes the range of
tools which are available for various woodworking machines. Also
shown is the range of cutting tips which we can provide for each
tool, depending on your application.
TYPES OF TOOLS AND THE TYPE OF
MACHINES ON WHICH THEY CAN BE USED
Tu S-A Dia
ng
m
llo
on
s
d
ee ten y
l
Ca
rb
ide
To
St
Router
Bits
Wing
Cutters
Insert
Tooling
Corrugated
Back
Knives
Lockedge
Shaper
Knives
Routers
Shapers
Moulders Tenoners Planers
Schmidt can make a variety of custom cutter
heads, all designed to meet your special needs.
MATERIALS USED IN TIPS OF CUSTOM CUTTING TOOLS
DIAMOND
• Can help reduce machine downtime
drastically.
• Retains sharpness 100 to 300 times longer
than carbide.
• Ideal for long runs where maintaining a
SUHFLVHSURÀOHLVUHTXLUHG
• Cuts smoother than Carbide.
• Must be used on power-fed operations.
• Recommended for all types of wood and
is excellent on abrasive materials such as
MDF or plywood.
• C-2 carbide used for most applications.
Better grades available when requirements
demand it.
• C-3 carbide, standard on our panel
raising cutters.
• C-4 carbide, standard on our insert tools.
TOOL STEELS
• Can be ground to a super sharp cutting edge
for soft and hardwood applications.
• Not recommended for cutting more abrasive
materials such as particle board, masonite, etc.
• Hardened to Rockwell C60-62.
S-ALLOY
• M2 & M3 High Speed Steels, the industry
• Recommended for most solid hard and
standard for long life and easy grinding.
soft woods.
• Holds a cutting edge longer, cuts smoother, • XLW (Speed Steel) for Xtra Long Wear.
feeds with less resistance.
- has similar characteristics to M-2.
• &DQEHVKDUSHQHGWRÀQHUHGJHWKDQ
- provides good wear life.
carbide.
• T1 High Speed Steel Rich in Tungsten, this
• Especially effective on cross-grain cutting.
Alloy Steel has proven itself when it comes to
• Can be honed for longer wear between
long runs and grinding ease. Available in
sharpening.
corrugated back knives, thin knives and
• Is sharpened with aluminum oxide or
Terminus knives only.
borazon only.
• Schmidt Super Steel A high quality steel
TUNGSTEN CARBIDE
specially treated to produce an extraordinarily
• Recommended for hardboard, plywood,
KDUGVXUIDFHWKDWZRQҋWFKLSSHHORUÁDNH
chipboard, masonite and any other
50% longer run times in solid woods, than M2
glue-bonded materials.
HSS. See page 15.
• Must be used for highly abrasive materials.
2
To Place An Order Call: 1-800-SCHMIDT
800-724-6438
HOW TO ORDER:
Please include the following
information when ordering:
Diameter, thickness,
bore (spindle) size and
number of wings
1
2
3
4
5
6
7
Specify S-Alloy or
Tungsten Carbide tips
Indicate type of wood
being cut
State whether cut is with
or across the grain
Include dimensioned
drawing or accurate
sample of wood being
cut
Identify type of machine
and whether spindle
rotation is clockwise or
counterclockwise
Point out which surface
of wood is in contact
with shaper table
DEPTH
OF CUT
WOOD
SHAPER
TABLE
FACE
COMING
ol
KNIFE
WIDTH
COUNTERCLOCKWISE
ROTATION
www.cggschmidt.com
SHAPER CUTTERS
SHAPER CUTTERS
CARBIDE TIPPED
For hardwood, plywood, chipboard, other glue-bonded or highly abrasive
materials, Tungsten Carbide tipped cutting tools are recommended.
DOUBLE TONGUE AND GROOVE
LOCK-MITRE
CUTTERS
SINGLE TONGUE & GROOVE
LOCK-MITRE CUTTERS
Ŷ[ŶERUHZLQJSFFDUELGH
tipped cutter set to produce single
tongue & groove lock-mitre corners. 45o
PART 2
3/4"-1 1/8"
FOR PART 1: Position
shaper cutter to cut all
panels as shown in sketch.
Ŷ[ŶERUHZLQJSFFDUELGH
tipped cutter set to produce double
tongue & groove lock-mitre corners.45o
3/16"
1/4"
FOR PART 2:
Use one half
of part 1 panels,
place on saw table and cut off
WRQJXHZLWKŶJURRYHUDVVKRZQ
This piece becomes Part 2.
PART 1
6HHEHORZIRUJURRYHUVRUVHHRXUQHZŶLQVHUWJURRYHURQSDJH
CAT. NO.
WC201
FOR PART 1: Position cutter on
shaper to cut tongue and groove
in center of wood panel when
ZRRGLVO\LQJÁDW&XWKDOIRI
your panels this way.
FOR PART 2:
Position cutter to cut tongue and
groove in center of wood
panel when wood is standing
on end.
TONGUE & GROOVE CUTTER SET
FINGER JOINT
CUTTER
Ŷ[ŶERUHZLQJSFFDUELGHWLSSHGFXWWHUVHWWRSURGXFH
Ŷ[ŶVTXDUHWRQJXHJURRYHRQPDWHULDOXSWRŶWKLFN
• One 3-wing groover
ŶGLD[ŶWKLFN
• Two 3-wing
straight cutters
ŶGLD[
1/2 “ thick)
3/16"
3/16"
PART 1
CAT. NO.
WC202
3/16"
3/32"
Ŷ[ŶERUH
wing carbide tipped cutWHUIRUÀQJHUMRLQWVRQ
PDWHULDOŶWRŶ
thick.
7/8"
CAT. NO.
3/8"
• One spacer collar
(Not shown)
To cut the tongue
joint, use the two 3wing cutters separated by the spacer
collar.
PART 2
3/4"-7/8"
WC203B
FLOORING
CUTTER SET
Ŷ [ Ŷ ERUH wing carbide tipped 5
pc. cutter set to produce tongue & groove
ÁRRULQJ
2 pc. tongue cutter
allows you to hold
dimension for the life of
the tool. Fits shapers
and XL moulders.
To cut the groove
joint, replace the
spacer collar with
the 3-wing groover.
1/4"
1/4"
CAT. NO.
WC200
GROOVERS
An excellent grooving cutter for all types of material
Ŷ',$0(7(5
Ŷ',$0(7(5
Ŷ',$0(7(5
3 WING
6 WING
6 WING
KERF
CAT. NO.
CAT. NO.
CAT. NO.
Ŷ
WC141
WC161
WC181
Ŷ
WC142
WC162
WC182
Ŷ
WC143
WC163
WC183
1/32"
1/4"
3/4"
CAT. NO.
WC240XL
6WDQGDUGERUHŶ
W!
Bushings available for small- NE
er bore sizes, see page 8.
For larger bores, our boring
charge applies.
See CAT NO.
WC898
CARBIDE TIPPED STAGGERED TOOTH STRAIGHT CUTTERS
With straight or true spiral cutting edges
Straight
Spiral
SIZE
CAT. NO.
CAT. NO.
ŶGLD[ŶFHO[ŶERUH
WC416S
WC416ST
* For use on fence machines. Includes 1/4 X 1/8" keyway in bore.
Call for custom size pricing.
These cutters are
used in the fence
industry to manufacture pickets and
other shaped wooden
parts.
3
SHAPER CUTTERS
FOR CABINET DOORS
S-ALLOY AND CARBIDE TIPPED
S-Alloy is ideal for cutting most solid hard and soft woods. Compared with other tips, S-Alloy holds a cutting edge longer, cuts smoother, and feeds with less resistance. It’s the
best cutting tip on the market for cutting solid wood stiles, rails and raised panels. Our C-3 Micrograin Carbide Tipped panel raising cutters are excellent for cutting man made
materials such as MDF, Medex, solid surface and fire treated materials. They also work well in very hard natural woods such as maple and teak.
PANEL RAISING CUTTERS
STILE & RAIL CUTTER SETS
• Cutters made for counterclockwise rotation with wood face side up. All
DUHŶGLDPHWHUZŶERUH
3-wings & 10° shear face.
• Consult factory for prices on other
shapes and designs.
•8VHEHDULQJ$&Ŷ[Ŷ
IRUSDWWHUQVKDSLQJZLWKŶWRQJXH
length.
• For bushings to other bore sizes,
see accessories page 8.
Insert style Panel Raising Cutters
and Stile and Rail sets on pages 38-39
FOR KITCHEN CABINETS
• Cutters made for
counterclockwise or clockwise
rotation with wood face up or
face down. Please specify
when ordering.
• $OODUHŶ'LDPHWHU[ŶERUH
3 wing.
• Use bearing AC113
Ŷ[ŶERUHIRUSDWWHUQ
shaping.
9/32"R
1/2"
3/4"
1-3/8"
1/4"
3/8"
ŶUDLVHDERYHWRQJXH
CARBIDE
WC21114
S-ALLOY
WC21214
CARBIDE
WC215C
5/8"
6WLOHV5DLOVIRUŶWRŶ
Set consists of 5 cutters & 1 spacer. Does not trim tongue.
S-ALLOY
WC215
3/4"
1-3/8"
ŶUDLVHDERYHWRQJXH
CARBIDE
WC21138
1/4"
3/8"
S-ALLOY
WC21238
CARBIDE
WC215EEC
Same as WC215 except for Eased Edges
S-ALLOY
WC215EE
3/8"R
3/4"
7/8"
1-3/8"
CARBIDE
WC211
1/4"
3/8"
ŶUDLVHDERYHWRQJXH
S-ALLOY
WC212
CARBIDE
WC216C
6WLOHVDQG5DLOVIURPŶWRŶ6HWFRQVLVWV
of 5 cutters & 1 spacer. Does not trim tongue.
S-ALLOY
WC216
3/8"R
5/8"
1/2"
7/8"
1-3/8"
3/8"
1/4"
ŶUDLVHDERYHWRQJXH
CARBIDE
WC21338
S-ALLOY
WC21438
CARBIDE
WC216EEC
Same as WC216 except for Eased Edges
S-ALLOY
WC216EE
3/4"R
3/4"
3/4"
5°
1/4"
1-3/8"
CARBIDE
WC213
4
ŶUDLVHDERYHWRQJXH
3/8"
S-ALLOY
WC214
CARBIDE
WC218C
6WLOHVDQG5DLOVIRUŶWRŶ6HWFRQVLVWV
of 5 cutters and 1 spacer. Does not trim tongue.
800-724-6438
S-ALLOY
WC218
www.cggschmidt.com
S-ALLOY AND CARBIDE TIPPED
STILE AND RAIL CUTTER SETS FOR INTERIOR AND EXTERIOR DOORS
• $OOVHWVŶGLDPHWHU[ŶERUHZLQJ• 8VHEHDULQJ$&Ŷ[ŶERUHIRUSDWWHUQVKDSLQJ
• Sets consists of 6 cutters - trims tongue to length. Hollow mortising chisels and bits available. See page 32
OVOLO
Pattern for
ŶWKLFN
Panel
Doors.
OVOLO
Pattern
IRUŶ
thick Panel
Doors.
3/8"R
1/4"
5/16" R
1-3/8"
1/4"
SHAPER CUTTERS
FOR ENTRY DOORS
1-3/4"
S-ALLOY
WC222
S-ALLOY
WC220
CARBIDE
WC222C
CARBIDE
WC220C
BEAD &
COVE
Pattern
IRUŶ
thick Panel
Doors
•For bushings to other bore sizes see accessories on page 7.
BEAD &
COVE
Pattern for
ŶWKLFN
Panel Doors
1/4"R
1/4"
7/32"
7/32"
1-3/8"
1/4"
1-3/8"
1/4"
1-3/4"
S-ALLOY
WC223
S-ALLOY
WC221
CARBIDE
WC223C
CARBIDE
WC221C
BEVEL
Pattern for
ŶWKLFN
Panel Doors
BEVEL
Pattern for
ŶWKLFN
Panel Doors
1/4"
1-3/4"
CARBIDE
WC226C
S-ALLOY
WC224
CARBIDE
WC224C
NEW!
ŶŶ721*8(*5229(&877(56
Make these door sets more versatile with these replacement
groovers. WC220,WC221, and WC224 can accommodate
PDWHULDOXSWRŶZLWKWKHDGGLWLRQRIHLWKHURIWKHVHVHWV
:&:&DQG:&ZLOOFXWXSWRŶGRRUV8VH
VHSDUDWHO\RUZLWKŶJURRYHUVXSSOLHGZLWKVHWV
Ŷ
S-ALLOY
WC2238
S-ALLOY
WC226
Ŷ
CARBIDE
WC2238C
Ŷ
S-ALLOY
WC2234
Ŷ
CARBIDE
WC2234C
GLASS PANEL
CUTTERS for
All Schmidt
Door Sets
Use these cutters with
any of the sets listed
above to produce an
inlaid glass panel door.
This set consists of
ŶZLGHFXWWHUV
to be used with 1 stile
cutter and 1 rail cutter to make a joint as shown. The rabbet
GHSWKSURGXFHGLVŶ
5DEEHWLQJFXWWHUVRQO\GRHVQRWLQFOXGHSURÀOHFXWWHUV
S-ALLOY
WC225
CARBIDE
WC225C
5
WINDOW SASH CUTTERS
S-ALLOY TIPPED
WINDOW SASH CUTTER SETS - S-ALLOY TIPPED
6FKPLGWZLQGRZVDVKFXWWHUVHWVXVHDVHULHVRIWHQRQVXSWRŶORQJWRSURGXFHVWURQJMRLQWVLQFDVHPHQWDQGGRXEOHKXQJ
VDVK 6HWV :&,1 :&,1 :&,1 DUH GHVLJQHG WR DFFRPPRGDWH LQVXODWHG JODVV XS WR Ŷ WKLFN 6HWV :&
WC231, WC232 are for single strength bead glass. Sticking, rabbeting, and all cope joints shown here can be made with any of
our standard sets. Due to the width and depth of cut, a minimum of 5 horse power is recommended for these tools.
• Sets consist of 6
cutters & 1 spacer.
3/8"
3/8"
3/8"
3/8"
3/8"
3/8"
ŶERUH
wing cutters.
• Use bearing AC115
Ŷ[ŶERUH
for Pattern Shaping.
1/4"
1/4"
1/4"
CAT. NO.
WC230
CAT. NO.
WC231
CAT. NO.
WC232
3/8"
3/8"
3/8"
1/8"
1/8"
1/8"
• Large diameter cope
FXWWHUVDSSUR[Ŷ
allow tenons up to
ŶORQJ
• Can be made
with carbide tips.
(Special order).
• Sets for different
SURÀOHVTXRWHGRQ
request.
1/2"
CAT. NO.
WC230IN*
* Indicates Special Order
CAT. NO.
WC231IN*
CAT. NO.
WC232IN*
Hollow mortising chisels and bits available. See page 32
A. TOP AND
BOTTOM RAILS
A
1/2"
1/2"
• Cope cutters can
EHPDGHWRÀW\RXU
tenoner.
TOP SASH
CHECK RAIL CUTTER
For cutting Check Rails on Double Hung Sash
ZLWKŶRUŶ3DUWLQJ6WULS
Ŷ'LDPHWHU[Ŷ%RUHZLQJ
• These cutters, when combined with our stock Sash
Cutters, cut everything you need to produce double
hung sash. Tipped with S-Alloy for smooth cutting.
(Not included with Window Sash Cutter Sets).
Carbide available by special order.
B
B. TOP
CHECK RAIL
C
Ŷ
CAT. NO.
WC235
Ŷ
BOTTOM SASH
6
CAT. NO.
WC236
A
C. BOTTOM
CHECK RAIL
800-724-6438
www.cggschmidt.com
ACCESSORIES
BEARINGS, BUSHINGS AND SHIMS
Schmidt offers a full range of accessories to compliment our tools.
All are made with the quality and precision you need to get your job done right.
BALL BEARING RUB COLLARS
CUSTOM - MADE TO ORDER
DIMENSIONS
ŶRUOHVV
RYHUŶWRŶ
RYHUŶWRŶ
RYHUŶWRŶ
RYHUŶWRŶ
TYPE A
TYPE B
CAT. NO.
AC100
CAT. NO.
AC103
AC101
AC104
AC102
AC105
AC102A
AC102B
AC105A
Type A
Type B
STANDARD BALL BEARING RUB
&2//$57<3($Ŷ7+,&.
DIMENSIONS
Ŷ2'[ŶERUHŶWKLFN
AC106
AC107
Ŷ2'[ŶERUHŶWKLFN
Ŷ2'[ŶERUHŶWKLFN
AC108
AC109
Ŷ2'[ŶERUHŶWKLFN
Ŷ2'[ŶERUHŶWKLFN
Ŷ2'[ŶERUH
AC109A
AC110
AC111
Ŷ2'[ŶERUHŶWKLFN
Ŷ2'[ŶERUH
AC112
AC113
Ŷ2'[ŶERUH
Ŷ2'[ŶERUH
Ŷ2'[ŶERUH
AC113A
AC114
AC114A
PP2'[ŶERUH
Ŷ2'[ŶERUH
Ŷ[ŶERUH
Ŷ[ŶERUH
PP[ŶERUH
CUSTOM SHIMS
Shims can be
made to order
in special sizes.
Ask your Schmidt
Tooling
Specialist for
details.
CAT. NO.
AC115
AC116
AC116A
Ŷ2'[ŶERUH(weight relieved)
Ŷ2'[ŶERUH(weight relieved)
PP2'[ŶERUH(weight relieved)
AC116B
AC117
AC118
AC125
COLOR CODED PLASTIC SHIMS
(For stackable cutter sets)
DESCRIPTIONS
3ODVWLFVKLPVŶERUH[ŶGLD
AC504A
AC505
AC506
AC507
AC508
3ODVWLFVKLPVPPERUH[ŶGLD
AC511
AC512
Consists of 48 pieces in clear plastic box. Eight varied
VL]HVUDQJLQJIURPŶWRŶ
SPACER SETS Precision Machined to close tolerances
DESCRIPTIONS
ŶERUHSFŶGLD
ŶERUHSFŶGLD
ŶERUHSFŶGLD
ŶERUHSFŶGLD
ŶERUHSF´GLD
ŶERUHSF´GLD
40 mm bore 6, pc. 2-1/2 “ dia
CAT. NO.
AC504
DIMENSIONS
ŶŶŶŶŶŶORQJ
ŶŶŶŶŶŶORQJ
ŶŶŶŶŶŶORQJ
ŶŶŶŶŶŶORQJ
ŶŶŶŶŶŶORQJ
ŶŶŶŶŶŶORQJ
ŶŶŶŶŶŶORQJ
CAT. NO. STRAIGHT
AC205
AC206
AC207
AC208
AC209
AC210
AC211
LONG FLANGE
SET
Spacers
7
ACCESSORIES
ACCESSORIES & MANUALS
!
W
NE
BUSHINGS
Bushings
Ŷ6WUDLJKW Double Flange Long Flange Short Flange
DIMENSIONS
CAT. NO.
CAT. NO.
Ŷ2'[Ŷ,'
AC200
Ŷ2'[Ŷ,'
AC201
AC202
AC200TD
AC201TD
CAT. NO.
AC200TL
CAT. NO.
AC200TS
AC201TL
AC201TS
AC202TL
AC203TL
AC202TS
AC203TS
Ŷ2'[Ŷ,'
AC204TL
AC204TS
Ŷ2'[PP,'
AC280TL
AC281TL
AC280TS
AC281TS
AC282TL
AC282TS
Ŷ2'[Ŷ,'
Ŷ2'[Ŷ,'
AC203
AC202TD
AC203TD
Ŷ2'[PP,'
Ŷ2'[PP,'
PP2'[Ŷ,'
PP2'[Ŷ,'
Ŷ2'[Ŷ,'
DOUBLE
FLANGE
LONG FLANGE
SET
STRAIGHT
SHORT
FLANGE
SET
CUSTOM MADE STEEL BUSHINGS & SPACERS
Straight, up
Short
Long
WRŶ/RQJ
1/4Ŷ Flange
1Ŷ Flange
DIMENSIONS
CAT. NO.
CAT. NO.
CAT. NO.
8SWRŶ2'
AC250
AC250TS
AC250TL
Ŷ2'WRŶ2'
AC251
AC251TS
AC251TL
AC252TS
AC252TL
AC283TL
AC284TL
AC283TS
AC284TS
2YHUŶ2'WRŶ2'
AC252
AC285TL
AC285TS
2YHUŶ2'WRŶ2'
AC253
"Priced Individually"
SPRAYWAY Saw Cleaner & Dry Lubricant
GLUE RELEASE
SPRAYWAY 836 Saw Cleaner, CAT. NO.
Pitch & Gum Remover. Spray on
AC850
and wipe off with cloth. Works in
minutes. Use on router bits, shaper
cutters, saw blades, etc.
SPRAYWAY 801 Dry Lubricant.
Reduces friction, inhibits resin build
up, prolongs tool life. Contains no
oil or silicone.
SPACE BALLS
Our Glue Release is a
CAT. NO.
creamy emulsion of high
AFR100
quality waxes and oils,
which form a waterproof
ÀOPXSRQGU\LQJ,WSURWHFWV
gluing equipment & saw
blades from hard to
remove adhesives.
CAT. NO.
AC855
Center your solid wood panels and stop panel rattle with Space Balls.
0DGHIURPDSODVWLFUXEEHUWKHVHÁH[LEOH
balls are an excellent way of holding your
panel securely during normal shrinking
DQGH[SDQGLQJ3DQHOÁRDWVDQGZRQҋW
crack. Available in three sizes. Quantity
discounts available.
DIAMOND HONING CONES
DESCRIPTION
CAT. NO.
Ŷ[Ŷ[Ŷ
AC660
Ŷ[Ŷ[Ŷ
ŶGLDPHWHUSULFHSHU
CAT. NO.
AC814
AC815
AC816
DIAMOND SHARPENING STONES
Diamond honing cones simplify a variety
of industrial slip honing and deburring
tasks. The convex surface of each cone
LVFRYHUHGZLWKÀQHPHVKGLDPRQG
Ŷ[Ŷ[Ŷ
DESCRIPTION
ŶGLDPHWHUSULFHSHU
ŶGLDPHWHUSULFHSHU
Ideal for touching up carbide and S-Alloy tipped cutters and knives
in between regular sharpening.
Two models available.
AC665
AC670
ŶORQJLQIROGLQJ
plastic handle
CAT. NO.
AC650
ŶORQJLQOHDWKHU
sheath(not pictured)
CAT. NO.
AC656
MANUALS
KNIFE GRINDING & WOODWORKING MANUAL
The bible for the woodworking knife industry written
mostly for operators of heavy duty machines including
moulders and shapers. Topics include: Essentials of
good grinding, including knife grinding • Composition,
care and use of grinding wheels • Setting of knives
• Development, selection and care of cutter heads
• Cutting angles/bends required for knives • Cutting
speeds, feed speeds • General moulder operation •
Machine stoppages and causes • Safety • Wood defects • CAT. NO.
Structure-wood. 167 pages
AC400
8
THE SHAPER BOOK
More than just a primer on shaper techniques.
With an emphasis on safety, this book is a step-bystep guide that will teach you all about the shaper;
from basic setups to cutting curved molding proÀOHV WR GHVLJQLQJ VKDSHU MLJV WKDW ZLOO H[SDQG \RXU
woodworking potential. Lonnie Bird, a professional
woodworker & instructor on shaper use, presents
a wealth of information and tips on how shapers
FDQLQFUHDVHWKHTXDOLW\DQGHIÀFLHQF\RI\RXUZRUN
This easy-to-read book is a must for the serious CAT. NO.
woodworker’s library and shop.
AC408
800-724-6438
www.cggschmidt.com
A TREATISE ON STAIRBUILDING & HANDRAILING
This treatise is a complete course of instruction in
the principles and practice of stairbuilding and handrailing, embracing all of the technical information
required in general practice. The subject is arranged
in three divisions: The construction of wooden stairs,
Handrailing, and Stone Stairs. The book is aimed at
the beginner, the stairbuilder and the architect. Each
branch of the art is treated in a comprehensive manner so as to be of service to the advanced craftsman.
CAT. NO.
A republication of the 1900 edition.
MODERN PRACTICAL JOINERY
This is perhaps one of the
best books ever published
on the subject. The scope of detailed work practices is
enormous. There are 27 chapters and nearly 600 pages,
fully illustrated with clear line drawings and diagrams,
and 31 photographs. Detailed information includes: Hand
tools • Workshop Appliances • Workshop Practices •
Machinery • Machine Practice and Use • Preparation of Work
and Joints • Doors and Paneling • Windows and Shutters
• Shop Fitting and Showcase Work • Shaped, Curved and CAT. NO.
Beveled Work • Stairbuilding and Handrailing • and more.
AC409
CIRCULAR WORK IN CARPENTRY & JOINERY
A practical guide on circular work of single and
double curvature. This re-edited edition contains
numerous drawings giving clear, easily underVWRRG H[SODQDWLRQV RI WKH HQWLUH ÀHOG RI FXUYHG ZRUN
which includes mouldings, angle brackets, cased
frames, elliptical heads, conical roofs and skylights,
windows, solid-headed frames and much more.
This is an essential guide to curved work and is
the only book on the subject available today.
CAT. NO.
THE COMPLETE MANUAL OF WOOD BENDING
Bending wood is an important facet of woodworking. Curved wood can be seen in many different
applications, including bentwood chairs, laminated
handrails, and milled window components. There
is a certain beauty to be found in curved work.
Master craftsman Lon Schleining provides stepby-step instruction on every method of producing
curved work.
Each process is fully illustrated with
CAT. NO.
photos and drawings.
AC411
AC403
AC404
There’s no better way to cut decorative mouldings and joinery than with the shaper. Quickly master all the techniques
IRU FXWWLQJ VHYHUDO SURÀOHV RU VKDSHV LQ D VLQJOH SDVV DV
well as accommodating cuts from two directions. Hundreds
of techniques are carefully explained in step-by-step,
photo-filled detail: controls and accessories; cutters and attachments, and mastering basic operations.
Advanced operations include freehand shaping, shaping
with jigs and fixtures and cutting stick joinery. If there’s
anything you need to know about putting a shaper to work, CAT. NO.
this book belongs next to your workbench.
THE COMPLETE ILLUSTRATED GUIDE TO
SHAPING WOOD
This comprehensive, step-by-step pictorial reference covers every practical method for milling, cutting, carving, turning and bending shapes. Organized for quick access, this
book illustrates the techniques in over 1,000 clear photos
and drawings. All the essential information is here, from
milling stock to turning or carving complex period details.
Many alternative ways to achieve the same results are
included, allowing woodworkers to choose
the one that works best for them. An indispensable refer- CAT. NO.
ence for every woodworker, whether beginner or pro.
AC412
A SIMPLIFIED GUIDE TO CUSTOM STAIR
BUILDING AND TANGENT HANDRAILING
This book can help solve the problems associated with custom stairs. Topics include: • The ability to construct distinctive, personalized, innovative
stair and handrail designs without the limits of
stock stair and handrail parts • Construction of rail
VHFWLRQV IURP VROLG VWRFN ZKHUH WKH ÀQHVW ZRRG
grain can be featured • Continuous incline turns
can be produced for any possible condition • There
are no forms to build.
CAT. NO.
A must for every stairbuilder.
TRIM CARPENTRY AND BUILT INS
Professional carpenter Clayton DeKorne shows you
exactly how to get tight miters and crisp details when
casing doors and windows, running baseboard, and
putting up crown moulding. You’ll also get pro tips
and trade secrets for working with challenges such
DV RXWRIVTXDUH ZDOOV ÁRRUV DQG FHLOLQJV 'HWDLOHG
step-by-step instructions with hundreds of photos and
drawings helps you get professional
CAT. NO.
results every time.
SHAPER HANDBOOK
AC405
AC406
WESTERN PINES CLUB
8000 SERIES MOULDING BOOK
A valuable reference guide to commonly
used mouldings, the 8000 series is the standard which has been specified industry wide
for decades. Actual size pictures of crowns,
casings, brick moulds and base mouldings are
just a few of the mouldings shown in this book.
A m u s t f o r a n y o n e who makes
CAT. NO.
mouldings.
NE
W!
AC407
Building Stairs
The editors of Fine Homebuilding magazine have compiled
a selection of stairbuilding articles that covers a broad range
of details relating to design, fabrication and installation. It’s
all here - from simple, site-built utility staircases to elaborate
spirals. These articles will help you to: • Master basic design,
layout, and construction techniques • Build railings and newel
posts • Build straight, L-shaped, spiral, and curved stairs
• Install straight and curved railings • Install
manufactured railings and balusters • Install a drop-down attic CAT. NO.
AC416
stairway.
MANUALS
MANUALS & GUIDES
AC413
MAKING MANTELS
%XLOGLQJDÀUHSODFHPDQWHOLVZHOOZLWKLQWKHDELOLWLHVRIDPDWHXU
woodworkers. Making Mantels is a comprehensive guide to
the construction of residential mantels. It provides the serious
woodworker, as well as the professional, with all of the critical
information needed to construct a safe and well-designed mantel.
Contains all the information needed on: How to design a mantel
6KRSDQGÀHOGGUDZLQJV0DQWHOVDQGWKH8QLIRUP%XLOGLQJ
Code • Fabricating an off-the-shelf mantel •
CAT. NO.
Wood finishing • Mantel installation • Secret panels
NE
W
!
AC414
Cabinet Doors and Drawers
Your complete how-to reference! Virtually every door and
drawer variation that a cabinetmaker is likely to encounter is addressed and explained in this comprehensive
guide. Designed to provide tips for both the professional
woodworker and the hobbyist. Covers construction of all
types of cabinet doors and drawers, extensive, full color
gallery of door and drawer styles, extensive coverage of
door and drawer hardware and installation, pocket doors, coopered doors, edge
CAT. NO.
banding, veneer work, metal drawers, and much more.
AC418
9
THIN KNIVES
NE
10
SETS FOR PLANERS & JOINTERS
T-1 HSS AND CARBIDE
THIN KNIFE SETS
In stock in Carbide Tipped, T-1 High Speed Steel and Solid Carbide. All of our thin knives are made
RIWKHÀQHVWTXDOLW\VWHHOVDQGFDUELGHV%HWZHHQRXUSUHSDFNDJHGVHWVDQGRXUIXOOVWRFNRIORQJHU
lengths, no one can offer a greater selection.
CARBIDE TIPPED
SOLID CARBIDE
T1 HSS
W!
SIZE
MACHINE
QUAN
CAT. NO.
CAT. NO.
CAT. NO.
Ŷ[Ŷ[Ŷ
Atlas,Boice-Crane, Delta
3
TN600H
TN600CT
TN600SC
Ŷ[Ŷ[Ŷ
Boice-Crane, Delta
3
TN604H
TN604CT
TN604SC
Ŷ[Ŷ[Ŷ
Powermatic
3
TN606H
TN606CT
TN606SC
Ŷ[Ŷ[Ŷ
Delta
3
TN610H
Ŷ[Ŷ[Ŷ
Boice-Crane, Delta
3
TN615H
TN615CT
TN615SC
Ŷ[Ŷ[Ŷ
Powermatic, Pryor
3
TN616H
TN616CT
TN616SC
Ŷ[Ŷ[Ŷ
Powermatic
3
TN617H
Ŷ[Ŷ[Ŷ
Delta
3
TN620H
Ŷ[Ŷ[Ŷ
Delta (Double Sided)
2
TN631H
Ŷ[Ŷ[Ŷ
Parks, Powermatic
3
TN624H
Ŷ[Ŷ[Ŷ
Craftsman
3
TN625H
TN625CT
Ŷ[Ŷ[Ŷ
1RUWKÀHOG
3
TN626H
TN626CT
Ŷ[Ŷ[Ŷ
Powermatic, Robland
3
TN630H
TN630CT
Ŷ[Ŷ[Ŷ
Foley-Belsaw/Jet
3
Ŷ[Ŷ[Ŷ
Foley-Belsaw/Jet
3
TN632H
TN632CT
Ŷ[Ŷ[Ŷ
Delta
3
TN633H
TN633CT
TN617SC
!
W
NE
Ŷ[Ŷ[Ŷ
Delta (End Slots)
3
TN634H
TN634CT
Ŷ[Ŷ[Ŷ
Rockwell
3
TN635H
TN635CT
[Ŷ[Ŷ
Powermatic PM15
3
TN635AH
TN635ACT
Ŷ[Ŷ[Ŷ
Grizzly
3
TN6355H
TN6355CT
Ŷ[Ŷ[Ŷ
1RUWKÀHOG
3
TN636H
TN636CT
There is a small
additional charge for
knives cut to size.
See price list.
TN632SC
CAT. NO.
NE
TN635SC
Ŷ[Ŷ[Ŷ
1RUWKÀHOG
4
TN636BH
TN636BCT*
SCMI 410
4
TN636AH
TN636AC*
Ŷ[Ŷ[Ŷ
Powermatic
3
TN637H
TN637CT*
Ŷ[Ŷ[Ŷ
Powermatic
3
TN639H
TN639CT*
Ŷ[Ŷ[Ŷ
Delta
3
TN640H
Ŷ[Ŷ[Ŷ
Powermatic
3
TN641H
TN641CT*
Ŷ[Ŷ[Ŷ
Parks, Northstate
4
TN642H
TN642CT*
Ŷ[Ŷ[Ŷ
Grizzly, Northwood
3
TN642AH
TN642AC*
Ŷ[Ŷ[Ŷ
Powermatic
3
TN643H
TN643CT*
Ŷ[PP[Ŷ
SCMI 552, 550, 520
4
TN643AH
TN643AC
Ŷ[Ŷ[Ŷ
1RUWKÀHOG3RZHUPDWLF
4
TN644H
TN644CT*
Ŷ[Ŷ[Ŷ
SCMI F535, F630
4
TN645H
TN645CT*
800-724-6438
TN625SC
W!
Ŷ[PP[Ŷ
For Knives cut to
other sizes see
table on
opposite page.
* Available special order.
TN6355SC
TNCUT
Our new T-1
HSS knives are
the longest lasting steel knives
on the market
due to an 18%
Tungsten
content.
An Excellent
Value.
www.cggschmidt.com
T1 HSS and CARBIDE TIPPED : Bar Lengths
Stocked in three lengths, these bars can be cut to size if your set is not listed on opposite
page.
Length and type
SIZE
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ7
CAT. NO.
TN100
TN101
TN102
TN103
TN104
TN105
TN106
TN107
TN204
TN205
TN206
TN207
TN208
TN209
Ŷ7
Ŷ&7
Ŷ7
CAT. NO. CAT. NO. CAT. NO.
TN10037
TN10131 TN10137
Ŷ&7
CAT. NO.
TN10337
TC103
TC104
TC105
TC106
TC107
TC10331*
TC10431*
TC10531
TC10631
TC205
TC20531*
TC207
TC20731
TN10331
TN10431
TN10531
TN10631
TN10731
TN20331
TN20531
TN20631
TN20731
TN20831
TN20931
TN10537
TN10637
TN10737
TN20437
TN20537
TN20637
TN20737
TN20837
Ŷ&7
CAT. NO.
TC10537*
TC20537*
Carbide Tipped Bar
Stock
Carbide tipped bar
lengths are now a stock
item. Several sizes of the
most popular thin knives
are available from stock
ready to equip any straight
knife planer with long lasting carbide tipped knives
IDVW6WRFNHGLQŶDQG
ŶWKLFNQHVVŶDQGŶ
lengths.
* Available - special order
THIN KNIVES
BAR LENGTHS T-1 HSS AND CARBIDE
Knives cut to size.
CAT. NO.
TCCUT
per cut
60227+%$&.%$56Ŷ/21*
)RUSODQLQJRUSURÀOLQJ6XSSOLHGLQ0RU;/:
Bars can be cut to size for an additional charge. TNCUT See price list.
SIZE
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
XLW
M2 HSS
CAT. NO.
TN300X
TN301X
TN302X
TN303X
TN304X
TN305X
TN400X
TN401X
TN402X
TN403X
TN404X
TN405X
CAT. NO.
TN300H
TN301H
TN302H
TN303H
TN304H
TN305H
TN400H
TN401H
TN402H
TN403H
TN404H
TN405H
MAGNETIC KNIFE SETTING GAUGES
*8$5$17(('.1,)(72/(5$1&(25Ŷ
Decrease set up time by 75% using these tools.
Easy to use on any machine
PLANER JIG
)RUNQLYHVXSWRŶ
2UGHUSODQHUMLJVIRUNQLYHVŶŶORQJ
2UGHUSODQHUMLJVIRUNQLYHVRYHUŶORQJ
DESCRIPTION
Planer Jig
Planer Jig Carbide
CAT. NO.
AC802
AC802C
JOINTER JIG
)RUVHWWLQJNQLYHVXSWRŶORQJ([WUD
magnetic bars and extension rods available
IRUNQLYHVXSWRŶ
DESCRIPTION
Jointer Jig
Jointer Jig Carbide
CAT. NO.
AC801
AC801C
ROTATING DIAL INDICATOR
ROTOCATOR is used to set all adjustable
settings on any planer. (Feed bed rollers, pressure bars and chip breakers). Can also be
used to set shaper knives.
DESCRIPTION
Rotocator
CAT. NO.
AC803
11
SHAPER STEEL
BEVELED EDGE
+($775($7('*5281'Ŷ%$56 Schmidt Shaper Steel is manufactured from the highest quality steel available.
Whether you use M2 high speed steel or our proven XLW grade, satisfaction is guaranteed. Choose steel thickness based on
pattern depth. 2XUVKDSHUVWHHOLVVROGLQŶEDUVRQO\ZLWKRUZLWKRXWORFNHGJHDQGFDQEHFXWWRVL]H/RFNHGJHDQGFXWWLQJ
are additional charges.
XLW
CAT. NO.
SIZE
Ŷ[Ŷ
SS102X
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
SS108X
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
SS110X
SS112X
Ŷ[Ŷ
Ŷ[Ŷ
SS114X
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
SS116X
SS202X
Ŷ[Ŷ
Ŷ[Ŷ
SS204X
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
SS212X
SS214X
SS216X
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
SS218X
SS220X
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
SS222X
SS224X
SS302X
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
SS304X
SS306X
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
SS308X
SS310X
SS312X
Ŷ[Ŷ
SS314X
Ŷ[Ŷ
SS316X
Ŷ[Ŷ
SS318X
Ŷ[Ŷ
SS320X
Ŷ[Ŷ
SS322X
Maximum Pattern depth is 3 to 4 times the thickness
of the steel depending on width of cut and material to
be cut.
BEVELED EDGE STRAIGHT KNIVES
CUTTING EDGE LENGTH
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
SK101
SK102
SK103
SK104
SK105
SK106
SK107
Ŷ
CAT. NO.
SK201
SK202
SK203
SK204
SK205
SK206
SK207
SK209
SS104H
SS106H
SS108H
SS110H
SS112H
SS114H
SS116H
SS202H
SS204H
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
SS206X
SS208X
SS210X
Ŷ[Ŷ
Ŷ;Ŷ
Ŷ[Ŷ
SS102H
Ŷ[Ŷ
Ŷ[Ŷ
SS104X
SS106X
Ŷ[Ŷ
12
M2 High Speed Steel
CAT. NO.
SIZE
Ŷ[Ŷ
SS206H
SS208H
SS210H
SS212H
SS214H
SS216H
SS218H
SS220H
SS302H
SS304H
SS306H
SS308H
SS310H
SS312H
SS314H
SS316H
SS318H
OTHER SERVICES
DESCRIPTION
Lockedge 1 side
Cutting into pieces
Ŷ
CAT. NO.
SK301
SK302
SK303
SK304
SK305
SK306
SK307
SK309
ŶCT
CAT. NO.
CT102
CT103
CT104
CT105
CT106
CT107
CT108
CT110
CAT. NO.
SS800
SS802
STEEL BEVELED EDGE KNIVES
Prices are per pair. Our XLW steel cut to
length, squared, balanced, and sharpened for
ÁXVKFXWWLQJ)RUJULQGLQJ\RXURZQSURÀOHV
order knives long enough to extend the full length
of grooves plus the pattern depth. (Never grind
shapes deeper than 4 times the steel thickness).
Add SS800 for lock edging (specify rotation).
CARBIDE TIPPED SHAPER KNIVES
Prices are per pair. These knives are stocked
ŶORQJZLWKŶFDUELGHLQOD\)RU)OXVK
cutting, be sure to tell us what size shaper collars
you have.
Add SS800 for lock edging (specify rotation).
800-724-6438
www.cggschmidt.com
If your application demands constant diameters, long
production runs and fast tooling changes, we can supply the
latest HSS and Carbide replacement knives.
Terminus, Centrolock and Tersa knives
We now carry replacement HSS and Carbide knives for the most popular constant diameter heads. Terminus,
Tersa and Centrolock. Each with their own design for quick changing, these knives are an economical way of
keeping your machine running and minimizing downtime. Listed below are the most popular sizes in steel and
carbide but all sizes are available. Any HSS Tersa knife not listed can be cut a shipped same day. Knives are
not interchangeable.
Tersa and Terminus heads are also
readily available for many types of
moulders and planers. Ask your salesman about heads for your machine.
TERSA, TERMINUS KNIVES
TERSA, TERMINUS & CENTROLOCK KNIVES
!
W
NE
REPLACEMENT KNIVES FOR
TERSA HEADS:
WEINIG HEADS:
TERMINUS HEADS:
HSS & Carbide(M42 also available)
HSS & Carbide
18% Tungsten & Carbide
HSS
Length
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
CAT. NO. CAT. NO.
T950060 T960060
T950100
HSS
Carbide
T960100
T950120
T960120
T950130
T960130
T950150
T960150
T950180
T960180
T950190
T960190
T950230
T960230
T950240
T960240
T950320
T960320
T950400
T960400
T950410
T960410
T950510
T960510
T950520
T960520
T950630
T960630
T950640
N/A
Steel
Carbide
Length
PPŶ
CAT. NO. CAT. NO.
T920060 T921060
PPŶ
PPŶ
T920100 T921100
T920130 T921130
PPŶ
PPŶ
T920150 T921150
T920190 T921190
Length
PPŶ
PPŶ
PPŶ
PPŶ
T920230 T921230
T920240 T921240
PPŶ T920270 T921270
PPŶ T920300 T921300
PPŶ T920460 T921460
PPŶ T920650 T921650
PPŶ
Carbide
CAT. NO. CAT. NO.
IT9505S IT9505C
IT9506S
IT9506C
IT9510S
IT9510C
IT9512S
IT9512C
IT9513S
IT9513C
IT9515S
IT9515C
IT9517S
IT9517C
IT9518S
IT9518C
IT9519S
IT9519C
IT9523S
IT9523C
IT9524S
IT9524C
PPŶ IT9545S
PPŶ IT9546S
IT9545C
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ
PPŶ IT9561S
PPŶ IT9577S
IT9546C
IT9561C
N/A
Call your Schmidt Salesman for price and availability on Tersa and Terminus heads for your moulder, shaper, planer or jointer.
13
´6&+XUH/RFNŶ
CARBIDE KNIFE SYSTEM
´6&+XUH/RFNŶ&$5%,'(.1,)(6<67(0
´6&+XUH/RFNŶ.1,)(6<67(0JLYHV\RXWKHDELOLW\WRJULQG\RXURZQFDUELGHVWUDLJKWDQGSURÀOHGNQLYHVZLWKRXWJULQGLQJ
steel and carbide at the same time, which can cause the grinding wheel to load and deteriorate prematurely. Interlocking
corrugations on both the face of the corrugated steel blank and the back of the solid carbide knife, allow the pieces to be ground
separately. Premium C3 micrograin carbide gives superior tool life in tough materials like MDF and abrasive natural woods. The
IXOOFRUUXJDWLRQGHVLJQDOORZVPRUHDGMXVWPHQWWKDQRWKHUVLPLODUSURGXFWV$YDLODEOHLQWKUHHZLGWKVIRUSODQLQJDQGSURÀOLQJ
FRUUXJDWLRQVRQO\$Q\´6&+XUH/RFNŶ.QLYHVFDQEHFXVWRPJURXQGWR\RXUSURÀOH4XRWHGRQUHTXHVW
Cutting Length
38mm Width
50mm Width
60mm Width
metric • (inch)
CAT. NO.
CAT. NO.
CAT. NO.
PPŶ
SL103S
SL105S
SL106S
PPŶ
SL203S
SL205S
SL206S
PPŶ
SL303S
SL305S
SL306S
PPŶ
SL403S
SL405S
SL406S
PPŶ
SL503S
SL505S
SL506S
PPŶ
SL603S
SL605S
SL606S
PPŶ
SL703S
SL705S
SL706S
PPŶ
SL803S
SL805S
SL806S
PPŶ
SL903S
SL905S
SL906S
PPŶ
SL1003S
SL1005S
SL1006S
PPŶ
SL1103S
SL1105S
SL1106S
PPŶ
SL1203S
SL1205S
SL1206S
PPŶ
SL1303S
SL1305S
SL1306S
PPŶ
SL1403S
SL1405S
SL1406S
PPŶ
SL1503S
SL1505S
SL1506S
PPŶ
SL1603S
SL1605S
SL1606S
PPŶ
SL1703S
SL1705S
SL1706S
PPŶ
SL1803S
SL1805S
SL1806S
PPŶ
SL1903S
SL1905S
SL1906S
PPŶ
SL2003S
SL2005S
SL2006S
PPŶ
SL2103S
SL2105S
SL2106S
PPŶ
SL2203S
SL2205S
SL2206S
PPŶ
SL2303S
SL2305S
SL2306S
PPŶ
SL2403S
SL2405S
SL2406S
PPŶ
SL2503S
SL2505S
SL2506S
Fits in all types of cutter heads
capable of accepting 10mm
thick knives.
Interlocking corrugations ensure
D´6&+XUH/RFNŶILW
6HHSDJHIRUGLDPRQGDQGYLWULÀHGJULQGLQJZKHHOV
CARBIDE TIPPED OR S-ALLOY TIPPED
CORRUGATED BACK KNIVES )RUSODQLQJDQGSURÀOLQJ
LENGTH OF
CUTTING EDGE
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ,1/$<'(37+
Ŷ+(,*+7
CAT. NO.
CT400A
CT400B
CT400C
CT400D
Ŷ,1/$<'(37+
Ŷ+(,*+7
CAT. NO.
CT400A5
CT400B5
CT400C5
CT40057
CT400D5
CT400E5
CT4005
Ŷ,1/$<'(37+ Ŷ,1/$<'(37+
Ŷ+(,*+7
Ŷ+(,*+7
CAT. NO.
CAT. NO.
CT401A
CT402A
CT401B
CT402B
CT401C
CT402C
DEPTH
OF
CARBIDE
60o
5/16"
CT401D
CT402D
CT401
CT402
Knives can be cut to size from above. See price list. CAT NO. CTCUT. 16-60° corrugations
standard -16-90° corrugations are special order. Replace CT with ST for S-Alloy part numbers.
6$OOR\WLSSHGPD\KDYHVHDPRQŶNQLYHV
14
800-724-6438
www.cggschmidt.com
KNIFE STOCK
CORRUGATED AND WILLIAMS & HUSSEY
Our corrugated and Williams & Hussey bars are made of quality steels, accurately heat treated and
SUHFLVLRQJURXQGIRURSWLPXPUHVXOWV)RUVWDQGDUGDQGFXVWRPJURXQGFRUUXJDWHGEDFNSURÀOHNQLYHV
6HHRXUVWDQGDUGSURÀOHNQLYHVRQSDJHV
&2558*$7('%$&.67((/%$56Ŷ/21*
XLW, M2 and Schmidt Super Steel available with 16-90° or 16-60° corrugations. *T1, & M3 available with 16-60° only.
M2 HIGH
SPEED STEEL
SIZE
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
*T1 HIGH
SCHMIDT
SPEED STEEL SUPER STEEL
XLW
CAT. NO.
CB841H6
CB842H6
CB843H6
CB844H6
CB845H6
CB846H6
CB851H6
CB852H6
CB853H6
CB854H6
CB855H6
CB856H6
CB857H6
CB858H6
CB859H6
CB860H6
CAT. NO.
CB101X
CB102X
CB103X
CB104X
CB105X
CB106X
CB201X
CB202X
CB203X
CB204X
CB205X
CB206X
CB207X
CB208X
CAT. NO.
CB102T6
CB103T6
CB104T6
CB105T6
CB106T6
CB202T6
CB203T6
CB204T6
CB205T6
CB206T6
CB207T6
CB208T6
CAT. NO.
CB101S
CB102S
CB103S
CB104S
CB105S
CB106S
CB201S
CB202S
CB203S
CB204S
CB205S
CB206S
CB207S
CB208S
M3
CB STEEL
CAT. NO.
CB201M6
CB202M6
CB203M6
CB204M6
CB205M6
CB206M6
CB207M6
Ask about our custom knife
grinding service for all types of
knives. Bars may be cut to any
size.
CAT. NO.
Cutting charge per cut. CBCUT
67((/),//(5%$56Ŷ/21*
SIZE
CAT. NO.
Ŷ[Ŷ[Ŷ&RUU
CB4106
Ŷ[Ŷ[Ŷ&RUU
CB4109
Ŷ[Ŷ[Ŷ&RUU
CB4116
Ŷ[Ŷ[Ŷ&RUU
CB4126
Ŷ[Ŷ[PP&RUU
CB4136
Stabilize your cutter heads
E\ÀOOLQJDOOSRFNHWV)RUDOO
FXWWHUKHDGVZKHQQRWÀOOLQJ
all pockets with knives.
Specify 16-60° or 16-90°
corrugations. Bars can be
NE
W!
cut to size for an additional
charge.
For grinding room supplies go
to page 18.
:,//,$06+866(<67((/%$56Ŷ/21* for the Williams & Hussey Molder and similar machines
• With cutting edge • M-2 grade Our bars are now also available with 16-60° corrugations for use in corrugated knife heads, Williams & Hussey
KHDGVDQG:LOOLDPV+XVVH\PDFKLQHVVHHSDJH$OOFRUUXJDWHGEDUVDUHŶWKLFN
%$5/(1*7+Ŷ/21*
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
without
corrugations
with
corrugations
CAT. NO.
WH600
WH601
WH602
WH603
CAT. NO.
WH601CB*
WH602CB
WH603CB
STRAIGHT KNIVES FOR PROFILING for the Williams & Hussey
CUTTING EDGE
HEIGHT
ŶRUOHVV
Ŷ
Ŷ
Ŷ
CAT.NO.
WH622
WH632
WH642
Ŷ
CAT.NO.
WH623
WH633
WH643
Ŷ
CAT.NO.
WH624
WH634
WH644
Ŷ
CAT.NO.
WH625
WH635
WH645
Ŷ
CAT.NO.
WH626
WH636
WH646
Ŷ
CAT.NO.
WH627
WH637
WH647
• M-2 Grade for long wear.
• Custom ground knives quoted on request.
• See pages 19 thru 26 for our standard profiles.
• Sold in pairs.
• Standard Straight Planing
.QLYHVŶ[Ŷ[Ŷ
CAT. NO.
WH621
15
SAW BLADES
PANEL, SCORING, MITER & CHOP
We are proud to introduce our expanding line of High Quality Saw Blades. Our High Quality Blades will give an
H[WUHPHO\ÀQHFXWRQDOOW\SHVRIPDWHULDOVXVHGLQKLJKTXDOLW\ZRRGZRUNLQJVKRSV$VNXVDERXWRXUQHZODVHUFXW
low noise saw plates. Anti-vibration saw blades at economical prices.
PANEL SAW BLADES High Quality
Precision ground and made for all popular panel saws. Find main blades here and matching scoring blades below.
No.
PANEL SAWS
Holz-her
Holz-her
Striebig
Altendorf/SCMI
Striebig/Holz-her
Striebig
Striebig/Holz-her
SCMI
Giben,SCMI
Altendorf/SCMI
Schelling
Giben
Schelling
Giben
Selco
TCG GRIND
TEETH
DIA.
64
220mm
64
220mm
60
300mm
72
300mm
100
300mm
100
300mm
100
300mm
100
300mm
72
350mm
72
350mm
72
350mm
60
400mm
60
400mm
72
400mm
72
400mm
72
450mm
BORE
KERF
CAT. NO.
SBPS226
SBPS226A
SBPS306
SBPS307
SBPS310
SBPS313
SBPS314
SBPS315
SBPS357A
SBPS357B
SBPS357C
SBPS406
SBPS416
SBPS407
SBPS417
SBPS457
30mm
30mm
30mm
30mm
30mm
30mm
30mm
Ŷ
80mm
30mm
30mm
30mm
75mm
30mm
75mm
80mm
4.4mm
4.4mm
4.8mm
•
•
SPECS.
(2) 7mm pinholes on 42mm
bolt circle
bolt circle
(2) 10mm pinholes on
60mm bolt circle
60mm bolt circle
2 Combination pin holes
for 35mm to 70mm bolt cicle
bolt circle
60mm bolt circle
bolt circle
SCORING SAW BLADES High Quality
These blades are used on panel saws with separate scoring blades for chip free cuts on both
sides of double sided laminates. Sizes to match main blades above.
CONICAL
GRIND
No.
TEETH
KERF
BORE
CAT. NO.
SPECS.
Ŷ
22mm
2x10
SBS10X2
4.3/5.3mm
Ŷ
24
SBS1224
Ŷ
22mm
2x12
SBS12X2
4.3/5.3mm4.3/
Ŷ
24
SBS1225
5.3mm4.3/
Ŷ
24
SBS1524
(2) 7mm pinholes on
5.3mm
55mm
36
SBS1636
66mm bolt circle
4.3/5.3mm
20mm
34
SBS2034
4.7/5.7mm
45mm
36
SBS2036A
(2) 9mm pinholes on
4.7/5.7mm
65mm
36
SBS2036B
110mm bolt circle
4.3/5.3mm
20mm
36
SBS2036C
MITER & CHOP SAW BLADES High Quality
Specially designed for smooth, chip free cutting without kickback on all chop and miter saws.
Altendorf/Striebig
SCMI/Martin
Altendorf
Giben
Schelling
SCMI
Schelling
Holzma
Selco
Schelling
Dewalt Sidekick
Delta & Sears
Dewalt,Ryobi,Hitachi
Delta
Hitachi,Makita,Ryobi
Hitachi,Makita,Sears
Makita,Ryobi
Hitachi
DIA.
100mm
120mm
120mm
125mm
150mm
160mm
200mm
200mm
200mm
200mm
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
ATB
W / RAKER
No.
TEETH
KERF
40
60
60
80
80
80
100
100
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
BORE
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
SBCS640
SBCS740
SBCS860
SBCS980
SBCS108
SBCS128
SBCS141
SBCS151
•
•
•
•
Our most popular blades are now made with new Low Noise, Laser Cut Saw Plates for noise reduction. Ask us
about our new band saw blades on page 45. We have blades for all types of machines.
16
800-724-6438
www.cggschmidt.com
SAW BLADES
CUT OFF, TRIM, RIP, DADO & COMBINATION
CUT OFF AND TRIM SAWS High Quality
)RUKDUGZRRGVRIWZRRGSO\ZRRGYHQHHUSDQHOÁDNHERDUGÀEHUERDUGDQGPDVRQLWH$7%
JULQGUHFRPPHQGHGIRUÀQHFKLSIUHHFXWWLQJ7ULSOH&KLSJULQGUHFRPPHQGHGIRUDEUDVLYHPDWHULDOVVXFKDV
ÁDNHERDUG
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
ATB
GRIND
TCG
GRIND
No.
TEETH
KERF
40
60
80
40
60
80
60
80
60
80
.125
.125
.125
.135
.135
.135
.156
.156
.156
.156
ARBOR
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
SBCO532
SBCO534
SBCO536
SBCO537
SBCO539
SBCO541
SBCO544
SBCO546
SBCO549
SBCO551
•
•
•
•
•
CAT. NO.
SBCO504
SBCO506
SBCO508
SBCO509
SBCO511
SBCO513
SBCO516
SBCO518
SBCO521
SBCO523
•
•
•
•
•
DADO SETS High Quality
For use on table or radial arm saws and double
end tenoners.
STD BORE MAX WIDTH
OF CUT
SIZE
DIA.
Ŷ
Ŷ
Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
Ŷ[Ŷ
No.
TEETH
40
24
24
CAT. NO.
SBDS914
SBDS912
SBDS913
Other diameter and widths of cuts available.
RIP SAWS High Quality
For ripping hard and soft woods.
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
STG GRIND
POWER FEED
No.
TEETH
KERF
24
24
24
36
36
.140
.175
.175
.175
.190
ARBOR
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
SBR308
SBR309
SBR312
SBR313
SBR314
•
DOUBLE FACE LAMINATE SAWS High Quality
For cutting Melamine and Formica panels.
GLUE LINE RIP BLADES High Quality
Smooth cut for all glue line applications.
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
TCG
GRIND
No.
TEETH
KERF
30
30
36
36
.145
.160
.170
.170
ARBOR
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
SBR307
SBR311
SBR316
SBR317
•
•
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
PLATE
THICKNESS
KERF
BORE
HOOK
No.
TEETH
.085
.085
.095
.120
.120
.115
.115
.125
.150
.150
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
-5°
-5°
-5°
-5°
-5°
60
80
100
100
120
30° ATB
GRIND
CAT. NO.
SBDF100
SBDF101
SBDF102
SBDF103
SBDF104
•
•
SOLID SURFACE BLADES High Quality
For the smoothest cutting on solid materials such as TopStone ,
Corian and other solid surface materials. Special clearances allow for
WKHVPRRWKHVWFXWRQWKHVHPDWHULDOVDQGJLYHDÀQLVKZKLFKUHTXLUHV
virtually no sanding or polishing. TC-45 Grind
®
®
COMBINATION SAWS High Quality
An all around saw ideal for small woodworking or cabinet
shops where one saw is used for all types of cutting.
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
PLATE
THICKNESS
DIA.
ATB
GRIND
No.
TEETH
KERF
50
60
70
80
.085
.110
.110
.120
ARBOR
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
SBCO533
SBCO547
SBCO548
SBCO550
•
•
Ŷ
Ŷ
Ŷ
220mm
300mm
.086
.086
.095
.080
.085
KERF
BORE
HOOK
No.
TEETH
.110
.110
.117
.102
.115
Ŷ
Ŷ
Ŷ
30mm
30mm
-2°
-2°
-2°
-5°
-5°
60
80
100
64
100
TC - 45
GRIND
CAT. NO.
SBSS100
SBSS101
SBSS102
SBSS103
SBSS104
•
•
•
Our most popular blades are now made with new Low Noise, Laser Cut Saw Plates for noise reduction. Ask us
about our new band saw blades on page 45. We have blades for all types of machines.
17
GRINDING WHEELS
NE
GRINDING SUPPLIES
GRINDING WHEELS )RU3URÀOH*ULQGLQJ0DFKLQHV
V 9LWULÀHG$OXPLQXP2[LGH(specialty formulated for grinding Schmidt XLW, M2, M3 knife steel)
C 9LWULÀHG&HUDPLF$OXPLQXP2[LGHIRUORQJHUZKHHOOLIHDQGEHWWHUÀQLVKHV
D = Diamond IRUJULQGLQJFDUELGHSURÀOHDQGVWUDLJKWNQLYHV
MACHINE
W
NE
!
SIZE
TYPE
GRIT
CAT. NO.
BOX
Weinig
225mm x 5mm x 60mm
V
54(white)
GW100
10
Weinig
225mm x 5mm x 60mm
V
46 (pink)
GW101
10
Weinig
225mm x 5mm x 60mm
V
100
GW105
10
Weinig
225mm x 5mm x 60mm
C
60
GW110
10
Weinig
225mm x 5mm x 60mm
C
46
GW112
10
Wadkin
Ŷ[Ŷ[Ŷ
V
54
GW115
10
Wadkin, Foley
Ŷ[Ŷ[Ŷ
V
54
GW120
10
Wadkin, Foley
Ŷ[Ŷ[Ŷ
V
54
GW130
10
Utma, Foley, Diehl, Oliver
Ŷ[Ŷ[Ŷ
V
54
GW200
10
Utma, Foley, Diehl, Oliver
Ŷ[Ŷ[Ŷ
V
54
GW205
10
Ŷ[Ŷ[Ŷ
C
46
GW205C
5
Weinig
Ŷ[Ŷ[PP
D-Square
180
GW300
1
Weinig
Ŷ[Ŷ[PP
D-Radius
180
GW305
1
Weinig
Ŷ[PPŶ[PP
D-Radius
220
GW321
1
Weinig
Ŷ[Ŷ[PP
D-Radius
220
GW322
1
Cut Off Wheel
Ŷ[Ŷ[Ŷ
n/a
n/a
GW150
1
W! Utma, Foley, Diehl, Oliver
Ceramic Grinding Wheels: for M-2 High Speed Steel.
Our most popular grinding wheels are now available in ceramic.
*ULQGORQJHUDQGJHWDEHWWHUÀQLVK
&DW1R*:)RUDOO:HLQLJSURÀOH*ULQGHUV
Cat No. GW205C For Utma, Foley, Diehl, Oliver Grinders.
Schure-Lock Carbide Knife System Grinding Wheels
!
W
NE
Using these three wheels your SCHure-Lock carbide knives will come out perfect every time. Can
also be used to grind Bak-Pak and Double Back systems. Made for Weinig knife grinders.
&DW1R*:;PP[PPERUH)RUURXJKLQJDQGÀQLVKLQJWKHVWHHOEDFNLQJ
&DW1R*:Ŷ[PP[PPERUH)RUURXJKLQJRXWWKHFDUELGH
&DW1R*:Ŷ[Ŷ[PPERUH)RUÀQLVKLQJWKHFDUELGH
GRINDING COOLANT )RUXVHZLWKDOOSURÀOHJULQGHUV
DESCRIPTION
CAT. NO.
1 gal. container (35 to 1 concentration)
AC900
Improve your grinders performance by using our coolant.
,PSURYHVÀQLVKVORZVGRZQZKHHOORDGLQJSUHYHQWVUXVW
Available in 1 gallon containers.
Mix approximately 35 to 1 for best performance.
MOULDER BED LUBE
NE
W!
(Oil base moulder lubricant)
$QRLOEDVHPDWHULDOZKLFKLVIRUWLÀHGZLWKR[LGDWLRQ
rust and foam inhibitors to give excellent performance as a friction reducer and lubricant. It can be
applied by injection, brushing or spray. A minimal
RLO\ÀOPLVOHIWRQWKHPHWDOWRDOORZIRUPRYHPHQWRI
lumber or wood by-products without resistance.
DESCRIPTION
1 gal. container
5 gal. container
18
TEMPLATE MATERIAL
:H QRZ KDYH Ŷ WKLFN
plastic as well as our
.050 thick blue tempered
steel template material.
Perfect for template
machines or easily
formed by hand. Ask us
about our custom made
SODVWLFWHPSODWHVPDGHWR\RXUGUDZLQJZRRGVDPSOHRU';)ÀOH7HPSODWHVDUH
PDGHIURPŶWKLFNDFU\OLF$OXPLQXPDQGVWHHOWHPSODWHVTXRWHGRQUHTXHVW
DESCRIPTION
Ŷ[Ŷ7HPSODWHVWHHO
Ŷ[Ŷ7HPSODWHSODVWLF
Ŷ[Ŷ7HPSODWHVWHHO
Ŷ[Ŷ7HPSODWHSODVWLF
CAT. NO.
AC910
AC912
CAT. NO.
AC501
AC501P
AC5014
AC5014P
DIAMOND DRESSERS We carry hand-held dressers to use on bench grinders and other machines. We stock
VLQJOHSRLQWGLDPRQGGUHVVHUVWRÀWPRVW:HLQLJSURÀOHJULQGHUV
DESCRIPTION
W!
NE
Non threaded for 930 thru 936
Threaded for 925, 934N, 950, 960
7/16 x 4 1/2 ct hand held
800-724-6438
CAT. NO.
AC902
AC903
AC906
www.cggschmidt.com
STANDARD PROFILE KNIVES
Now you can pick the cutter head and the cutters you need from the same handy piece of
OLWHUDWXUH7KHVHSURÀOHVDUHLQVWRFNIRULPPHGLDWHVKLSPHQWDQGFDQDOVREHLQFRUSRUDWHGLQWRRWKHU
types of tooling such as carbide, S-Alloy tipped cutters and knives, or Schure Lock knives.
2YHUSURÀOHVLQVWRFNIRUERWKFRUUXJDWHGKHDGVDQG:LOOLDPV+XVVH\PDFKLQHV
All made from Schmidt M2 High Speed Steel.
Ask us about our other quality, corrugated back steels in M3, XLW , T-1 and
Schmidt Super Steel.
KNIFE PROFILES
CROWNS
See available heads on pages 27 & 28
These knives are kept in stock for 60 degree corrugated heads and the Williams & Hussey Molder and
are ready for immediate shipment. Prices shown are per pair. Please specify with CB for corrugated
back or WH for use on the Williams & Hussey. eg: CBDY45 or WHDY45.
7KHVHSURÀOHVFDQDOVREHJURXQGIRUXVHLQRWKHUW\SHVRIWRROKROGHUVDQGPDFKLQHV
Shaper Knives Where applicable for lock-edge shaper knives add 15% to price shown.
Ŷ6PRRWK%DFN For Jet, RBI, Woodmaster, Foley and Powermatic machines add 20%
to prices shown for sets of three. For one knife take 70% of price shown.
Allow one week for delivery on all non-stocked knives.
For profiles not shown or knives ground for other types of
machines or tool holders call our Custom Knife Department.
Crowns
CAT. NO.
DY46
priced
per pair
CAT. NO.
DY45
CAT. NO.
WM47
CAT. NO.
WM48
CAT. NO.
WM49
priced
per pair
priced
per pair
priced
per pair
priced
per pair
CAT. NO.
WM51
priced
per pair
CAT. NO.
WM52
priced
per pair
19
KNIFE PROFILES
BEDS, COVES, STOOLS, BASE SHOES
Crowns
Quarter Rounds
38 and 52 degree angle knives available for back
cuts on crown and bed mouldings. See page 22.
38
L
52
R
R
Beds
CAT.NO.
WM53
priced
per pair
CAT.NO.
WM58
priced
per pair
CAT.NO.
WM70
priced
per pair
3/8"
CAT.NO.
WM74
Radius
1 1/4Ŷ
1 1/16Ŷ
1Ŷ
3/4Ŷ
11/16Ŷ
5/8Ŷ
1/2Ŷ
3/8Ŷ
1/4Ŷ
CAT.NO.
WM75
priced
per pair
priced
per pair
CAT.NO.
WM102 /pr
WM103 /pr
WM104 /pr
WM105 /pr
WM106 /pr
WM107 /pr
WM108 /pr
WM109 /pr
WM110 /pr
Stools
Coves
CAT.NO.
WM54
priced
per pair
CAT.NO.
WM59
priced
per pair
CAT.NO.
WM116
priced
per pair
CAT.NO.
WM81
priced
per
pair
CAT.NO.
WM82
priced
per
pair
CAT.NO.
WM119
priced
per pair
CAT.NO.
WM84
priced
per
pair
CAT.NO.
WM67
priced
per pair
Base Shoes
CAT.NO.
WM126
CAT.NO.
WM127
priced
per pair
priced
per pair
CAT.NO.
WM89
Coves
priced
per
pair
R
CAT.NO.
WM86
priced
per pair
CAT.NO.
WM57
1/2
priced
per pair
CAT.NO.
WM68
priced
per pair
45 degree angle knives available for back cuts
on cove mouldings. See page 22.
45
L
45
R
Radius
3/4Ŷ
5/8Ŷ
9/16Ŷ
1/2Ŷ
7/16Ŷ
3/8Ŷ
CAT.NO
WM93
WM94
WM95
WM96
WM100
WM101
3URÀOHVFRQIRUPWR:0VHULHVSDWWHUQV
20
800-724-6438
www.cggschmidt.com
Flat Astragals
CAT. NO.
WM133
Base Mouldings/Caps
CAT. NO.
DY156
priced per pair
priced per
pair
CAT. NO.
WM166
CAT. NO.
WM167
priced per
pair
CAT. NO.
WM134
CAT. NO.
DY161
priced per pair
priced per pair
CAT. NO.
DY157
CAT. NO.
WM172
priced per
pair
priced per
pair
KNIFE PROFILES
PANEL, BRICK, ASTRAGALS, CAPS
Brick Moulding
Not Available for
Williams & Hussey
priced per
pair
CAT. NO.
WM175
priced per pair
CAT. NO.
WM135
priced per pair
Glass Beads
CAT. NO.
DY158
priced per
pair
CAT. NO.
WM147
CAT. NO.
WM148
priced per
pair
priced per
pair
Nosing and Cove
CAT. NO.
DY159
priced per
pair
CAT. NO.
DY152
priced per
pair
CAT. NO.
DY162
CAT. NO.
WM180
priced per pair
priced per pair
CAT. NO.
DY163
Panel Mouldings
priced per
pair
CAT. NO.
WM182
CAT. NO.
DY153
priced per
pair
priced per
pair
CAT. NO.
WM183
priced per
pair
CAT. NO.
DY160
priced per
pair
CAT. NO.
WM163
priced per
pair
CAT. NO.
DY154
priced per
pair
Not Available for
Williams & Hussey
CAT. NO.
DY155
priced per
pair
priced per
pair
Not Available for
Williams & Hussey
CAT. NO.
WM185
CAT. NO.
WM186
CAT. NO.
WM164
priced per
pair
priced per
pair
21
KNIFE PROFILES
PICTURE, CHAIR, CASING, SHINGLE
Solid Crowns
Not Available for
Williams & Hussey
CAT.NO.
DY192
CAT.NO.
DY193
priced per
pair
priced per
pair
2 passes
required For
Williams & Hussey
CAT.NO.
DY194
priced per
pair
priced per
pair
priced per
pair
CAT.NO.
DY191
CAT.NO.
DY203
CAT.NO.
DY202
CAT.NO.
DY195
priced per
pair
Chair Rail & Casings
priced per
pair
CAT.NO.
WM297
priced per
pair
2 passes
required for
Williams & Hussey
CAT.NO.
WM300
Not Available for
Williams & Hussey
priced per
pair
CAT.NO.
DY205
CAT.NO.
DY204
priced per
pair
priced per
pair
CAT.NO.
WM315
priced per
pair
priced per
pair
priced per
pair
Shingle Panel
Mouldings
CAT.NO.
WM207
CAT.NO.
WM321
CAT.NO.
WM298
WM207 will
also produce
WM209 & 210
priced per
pair
CAT.NO.
WM304
CAT.NO.
WM212
priced per
pair
priced per
pair
CAT.NO.
WM327
CAT.NO.
WM316
priced per
pair
priced per
pair
Picture Mouldings
3URGXFLQJWKLVSURÀOHRQDVKDSHUUHTXLUHVSDVVHV
CAT.NO.
WM273
priced per
pair
CAT.NO.
WM213
priced per
pair
22
CAT.NO.
WM217
priced per
pair
CAT.NO.
WM218
3URGXFLQJWKLVSURÀOHRQDPRXOGHUUHTXLUHVDQDGGLWLRQDOVHWRINQLYHV
priced per
pair
CAT.NO.
CAT.NO.
WM276
priced per
pair
800-724-6438
WM274
priced per
pair
CAT.NO.
WM329
priced per
pair
www.cggschmidt.com
KNIFE PROFILES
CHAIR RAIL, BEADING, FLUTING
Chair Rail & Casings
CAT.NO.
WM332
CAT.NO.
WM371
priced per
pair
priced per
pair
CAT.NO.
DY400
CAT.NO.
WM366
priced per
pair
priced per
pair
CAT.NO.
WM448
CAT.NO.
WM351
priced per
pair
priced per
pair
CAT.NO.
BR401
priced per
pair
CAT.NO.
WM356
priced per
pair
CAT.NO.
SM403
CAT.NO.
WM376
priced per
pair
priced per
pair
CAT.NO.
WM445
priced per
pair
CAT.NO.
WM444
CAT.NO.
WM683
priced per
pair
priced per
pair
Beading & Fluting Knives
´)OXWLQJŶ
CAT.NO. FL145
WKLVSURÀOHSULFHGSHUSDLU
CAT.NO. BD384
WKLVSURÀOHSULFHGSHUSDLU
CAT.NO.
WM390
CAT.NO.
WM361
priced per
pair
priced per
pair
CAT.NO.
DY402
priced per
pair
CAT.NO.
DY404
priced per
pair
´%HDGLQJŶ
For other Beading or Fluting knives specify radius,
VSDFLQJQXPEHURIEHDGVRUÁXWHV
Priced on request.
23
KNIFE PROFILES
EIGHTH ROUND, BULLNOSE, BEAD
Base Mouldings & Stops
BM100
BM101
priced per
pair
3/8Ŷ
9/16Ŷ
CAT.NO.
BM103
1/2Ŷ
priced per
pair
priced per
pair
CAT.NO.
BM105
CAT.NO.
BM104
per
5/8Ŷ priced
pair
CAT.NO.
BM110
3/8Ŷ priced per pair
11/16Ŷ
priced per
pair
BM112
BM111
priced per
7/16Ŷ pair
9/16Ŷ
priced per
pair
CAT.NO.
BM114
CAT.NO.
BM113
5/8Ŷ
BM102
priced per
pair
7/16Ŷ
priced per
pair
priced per
pair
11/16Ŷ
Eighth Round Knives
Bead & Bullnose Knives
To produce larger Bullnoses
.062
Bead Knives
R
Radius
Ŷ
Ŷ
Ŷ
Ŷ
CAT.NO.
%1SU
!
%1$SU
EW
%1SU N
%1SU
Radius
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT.NO.
%1SU
%1SU
%1SU
%1SU
%1SU
%1SU
%1SU
%1SU
%1SU
%1SU
1st & 2nd pass
3rd & 4th pass
Bullnose Knives with Flare
R
24
Radius
Ŷ
Ŷ
Ŷ
Ŷ
17/32"
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT.NO.
%1SU
%1SU
%1SU
%1SU
!
BN106A/pr
EW
%1SU N
%1SU
%1SU
%1SU
%1SU
800-724-6438
www.cggschmidt.com
KNIFE PROFILES
HAND RAILS, PANELING, FLOORING
Hand Rails
T
T
L
CAT.NO.
H100R /pr
H100L /pr
H100T /pr
L
R
R
CAT.NO.
H102R /pr
H102L /pr
H102T /pr
Paneling & Flooring Knives
V-Panels
CAT.NO.
P115 /pr
L
CAT.NO.
H101R /pr
H101L /pr
R
T
G
CAT.NO.
37
3*
37
3*
P103T
P103G
37
3*
Tongue(Groove)
IRUŶ93DQHOLQJSU
IRUŶ93DQHOLQJSU
IRUŶ93DQHOLQJSU
IRUŶ93DQHOLQJSU
for WP-4 Standard /pr
for WP-4 Standard /pr
IRUŶ93DQHOLQJSU
IRUŶ93DQHOLQJSU
Flooring Knives
Tongue & Groove
Industry Standard with Nail Groove
)RUŶDQGŶPDWHULDO
3PDNHVŶ[Ŷ7RQJXHDQG*URRYH
3PDNHVŶ[Ŷ7RQJXHDQG*URRYH
Also available from stock in carbide tipped
and for the XL Moulder.
B
T
CAT.NO.
P104T /pr
P104G /pr
P107T /pr*
P107G /pr*
G
T
CAT.NO.
T= Tongue Side
P105T /pr
G= Groove Side
P105G /pr
% %DFNRXWIRUŶ)ORRULQJ3/pr
G
*/RRVHÀWWLQJIRUHDVHRIDVVHPEO\
25
KNIFE PROFILES
BACKOUT, CASING, CUSTOM
Pickwick for V-Panel
Victorian Casing Knives
7RPDWFKRXUVWDQGDUGURVHWWHSURÀOHV
CAT.NO.
PKWIK
priced per
pair
CAT.NO.
180C
priced per
pair
CAT.NO.
181C
priced per
pair
Angle & Backout Knives
38
L
52
R
CAT.NO.
182C
priced per
pair
CAT.NO.
CBA38R /pr
CBA38L /pr
CBA52R /pr
CBA52L /pr
WHA38L /pr
WHA52R /pr
45
L
45
R
CBA45R /pr
CBA45L /pr
CAT.NO.
183C
priced per
pair
CAT.NO.
WHA45R /pr
WHA45L /pr
Adjustable Backout Knives
Custom Knives Also Available
Custom knives are a specialty of the Charles
G. G. Schmidt & Company. Send us a sketch
E\PDLOE\ID[PDFKLQHRUD';)ÀOHE\HPDLO
Our e-mail address is [email protected].
By using our diagram below let us know which
KHDGVZLOOEHGRLQJWKHSURÀOLQJ
Specify 60° or 90° corrugations.
WH CAT.NO.
:+$SU
:+$SU
CB CAT.NO.
&%$SU
&%$SU
Size
ŶŶ
ŶŶ
Top
Left
Infeed End of Moulder
Right
Bottom
26
800-724-6438
www.cggschmidt.com
CUTTER HEADS
2 & 4 KNIFE, W&H, COPING HEADS
2 KNIFE CORRUGATED CUTTER HEADS 7KH-XQLRU/LQHIRUŶŶ6SLQGOHV
$YDLODEOHLQFRUUXJDWLRQV'HVLJQHGWRXVHWKHVDPHŶŶWKLFNFRUUXJDWHG
steel as our larger cutter heads. 4 knife heads available for special applications.
)RUŶ6SLQGOHV
FXWWLQJDQJOHŶ0D[GHSWKRIFXW
Length
Ŷ
Ŷ
Diameter
Ŷ
Ŷ
CAT. NO.
MH222P6
MH223P6
)RUŶ6SLQGOHV
FXWWLQJDQJOHŶ0D[GHSWKRIFXW
Length
Diameter
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
MH232P6
MH233P6
MH234P6
2 AND 4 KNIFE CUTTER HEADS
)25Ŷ63,1'/(6
For Large Shapers & Small Moulders
Ŷ'LDPHWHU
• Available in 16-60° or **16-90° corrugations
8VHVŶŶŶRUPPFRUUXJDWHGVWHHO
Ŷ0D[GHSWKRIFXW
8VLQJŶWKLFNVWHHO
4 Knife Pocket Type
20° cutting angle
Length
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Diameter
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
MH100P
MH102P
MH103P
MH105P
MH106P
Knives are additional.
Allen wrench
supplied with pocket
type Heads.
** Heads ordered with
16-90° corrugations
subject to additional
charge, see price list.
CAT NO. MH1690
2 Knife Pocket Type
20° cutting angle
Length
Diameter
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
MH201P
MH202P
MH203P
MH204P
MH205P
MH206P
3LQ+ROHVIRU;/DQGPRXOGHUVLQŶGLDPHWHUKHDGVRQWKLVSDJHDUHDQDGGLWLRQDOFKDUJH6HHSULFHOLVW CAT NO.
W&H SHAPER HEADS
STANDARD COPING DISCS
Now you can use our knives made
for the Williams and Hussey moulder on a
shaper or moulder using one of these heads.
+ROHVLQNQLYHVPXVWEHDEOHWRDFFHSWŶ
EROWVŶKHDGVPDGHZLWKŶERUH
ŶKHDGVPDGHZLWKŶRUPP
bore. Please specify size when ordering.
Heads with larger bores quoted on request.
Shaper Heads for
Williams and Hussey knives. 23° Cutting Angle
Length
Ŷ
Ŷ
Ŷ
Ŷ
Diameter
Ŷ
Ŷ
Ŷ
Ŷ
MH809
CAT. NO.
WH404
WH404H
WH406
WH406H
Heads are weight relieved, have
a 25° cutting angle for a cleaner
FXW DUH Ŷ WKLFN DQG KDYH
corrugations. Two can be used
together with spacer to produce
tenons. Custom heads also made
WR\RXUPDFKLQHVVSHFLÀFDWLRQV
DESCRIPTIONS
Ŷ2'[Ŷ,'NQLIH
Ŷ2'[Ŷ,'NQLIH
Ŷ2'[Ŷ,'NQLIH
Ŷ2'[Ŷ,'NQLIH
Ŷ2'[Ŷ,'NQLIH
Ŷ2'[Ŷ,'NQLIH
CAT. NO.
MH780
MH781
MH785
MH786
MH790
MH791
27
CUTTER HEADS
STANDARD MOULDER HEADS
ŶPPGLDPHWHU6WUDLJKW%RUHIRU
Weinig, Wadkin, SCMI & similar machines.
STANDARD MOULDER HEADS
For American, European and Japanese
Machines.
Length
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
ŶPPGLDPHWHU6WUDLJKW%RUH
CAT. NO.
50mm
MH461
MH462
100mm
150mm
180mm
230mm
4 Knife
Dual Angle
CAT. NO.
MH442
CAT. NO.
MH442D
MH4442
MH444
MH444D
MH4452
MH4462
MH445
MH446
MH445D
MH446D
MH4472
MH447
MH447D
Ŷ
MH4482
MH448
MH448D
Ŷ
MH4492
MH449
MH449D
6XSSOLHGZLWKFRUUXJDWLRQVDQGXVHŶŶŶRUPPWKLFNVWHHO
2 knife and 4 knife heads come with 15° cutting angle. Dual angle heads have 12°
and 20° cutting angles. 6SHFLI\ŶRUPPERUHZKHQRUGHULQJAdd M to
HQGRISDUWQXPEHUIRUPPERUH6XSSOLHGZLWKŶLIQRWVSHFLÀHG
4 Knife
Length
2 Knife
CAT. NO.
MH4422
MH462A
MH463
MH464
All heads are supplied with pocket style gibs. Knives are additional.
Supplied with a 22° cutting angle, 16-60° corrugations
DQGDŶERUH
ŶPPGLDPHWHU[ŶRUŶVWUDLJKWERUH
Length
4 Knife
CAT. NO.
6 Knife
CAT. NO.
Ŷ
Ŷ
Ŷ
MH642
MH644
MH646
MH662
MH664
MH666
6XSSOLHGZLWKFXWWLQJDQJOHDQGFRUUXJDWLRQV6SHFLI\Ŷ
RUŶERUHZKHQRUGHULQJ
Ŷ(150mm) diameter
with open-end self-centering sleeves
Length
Ŷ
Ŷ
4 Knife
6 Knife
CAT. NO.
MH672
MH674
CAT. NO.
MH682
MH684
Ŷ
MH676
MH686
Supplied with hex nut, 15° cutting angle and 16-60° corrugations. Specify
ŶRUŶERUHDQGGLUHFWLRQRIURWDWLRQZKHQRUGHULQJ
*UHDVHÀWWLQJV
are installed on ends
XQOHVVVSHFLÀHG
Recommended
safety locking rings
are available.
ŶPPGLDPHWHU
Hydro-Lock Moulder Heads
CAT. NO.
MH820
GREASE GUNS AND GREASE
Grease Gun for Hydro-Lock heads
Grease Gun Rebuilding Kit
Grease for Hydro-Lock heads -per tube
28
CAT. NO.
MH816
MH816A
MH817A
4 Knife
6 Knife
Length
CAT. NO.
CAT. NO.
50mm
MH405
MH605
100mm
MH410
MH610
150mm
MH415
MH615
180mm
MH418
MH618
230mm
MH423
MH623
Supplied with 15° cutting angle and 16-60° corrugations.
6SHFLI\ŶPPŶRUŶERUHZKHQRUGHULQJ
&XVWRPKHDGVPDGHWR\RXUVSHFLÀFDWLRQV
Call for pricing and delivery time.
800-724-6438
www.cggschmidt.com
THE INNOVATORS
0XOWLSURÀOH&RUUXJDWHG%DFN3DQHO5DLVLQJ&XWWHUV
INNOVATORS
ŶFXWWLQJFLUFOH[ŶERUH,QQRYDWRU-U
CAT. NO.
QC601
QC602
ŶFXWWLQJFLUFOH[ŶERUH,QQRYDWRU
MATCHING BALL BEARINGS
$&Ŷ2'[ŶERUH
$&Ŷ2'[ERUH
This tool is a must for custom cabinet, millwork and furniture shops.
The Innovator and Innovator Jr. are two of our most popular tools. They combine the convenience and economy
RI Ŷ WKLFN FRUUXJDWHG VWHHO ZLWK D SRFNHW GHVLJQ WKDW FDQ VDIHO\ SURGXFH SDQHO SURÀOHV XS WR Ŷ GHHS %RWK
VL]HVXVLQJWKHVDPHSRFNHWGHVLJQFDQXVHHLWKHUŶWKLFNFRUUXJDWHGEDFNVWHHONQLYHVRUWKHQHZPP
´6&+XUH /RFNŶ FDUELGH NQLIH V\VWHP :LWK WRGD\ҋV XVH RI
MDF and other composite materials, the use of carbide is a
must, and the Innovators allow anyone capable of grinding
carbide knives to produce their own 3 wing carbide panel
raising cutters. They can be used with or without ball bearing
rub collars.
Please specify Innovator or Innovator Jr. and direction of
rotation when ordering. Other sizes quoted on request.
Blank steel knives are available in sets of 3 for custom
JULQGLQJ\RXURZQSURÀOHV
INNOVATORS
INNOVATORS
BLANK KNIVES
Please specify clockwise or counter clockwise rotation and
if cutter is over the wood or under the wood.
SIZE
0+66Ŷ;Ŷ;Ŷ
6&+XUH/RFNŶ;Ŷ;PP
CAT. NO.
QC300
QC300SL
6WDQGDUG3URÀOHVIRUWKH,QQRYDWRU Sold in sets of 3. Stocked in high speed steel and SCHure • Lock carbide knives
3/4"
CAT.NO.
QC100
3/4"
CAT.NO.
QC100SL
CAT.NO.
QC103SL
5/8"
CAT.NO.
QC200
CAT.NO.
QC104
CAT.NO.
QC200SL
CAT.NO.
QC201
CAT.NO.
QC104SL
CAT.NO.
QC204
CAT.NO.
QC102SL
CAT.NO.
QC105
CAT.NO.
QC105SL
5/8"
CAT.NO.
QC201SL
5/8"
CAT.NO.
QC203SL
CAT.NO.
QC102
3/4"
5/8"
5/8"
CAT.NO.
QC203
CAT.NO.
QC101SL
3/4"
3/4"
CAT.NO.
QC103
CAT.NO.
QC101
3/4"
CAT.NO.
QC202
CAT.NO.
QC202SL
5/8"
CAT.NO.
QC204SL
CAT.NO.
QC205
CAT.NO.
QC205SL
29
ROSETTES
ROSETTES
MULTIPROFILE ROSETTE CUTTERS
2 wing Rosette cutter uses 1/4Ŷ thick 16-60° corrugated steel. For use on slow rpm machines.
TOOL HOLDER
ROSETTE CUTTERS
Ŷ'LDPHWHU
Ŷ'LDPHWHU
Ŷ'LDPHWHU
BLANK KNIVES CUSTOM KNIVES
CAT. NO.
CAT. NO.
AC819
CB189
CB190
CB189P
CB190P
AC821
CB191
CB191P
CAT. NO.
AC818
ŶRU0RUVH7DSHUVKDQNVRQO\
Our 2 knife Corrugated Back Rosette tool holders are designed to
produce quality rosettes or plinth blocks on low rpm machines such
as drill presses, lathes or (bridgeport type) milling machines. They
DUHDYDLODEOHLQWKUHHGLDPHWHUVDQGWKUHHVKDQNVL]HVŶŶ
PRUVHWDSHU$ŶRUŶVKDQNLVLQFOXGHGZLWKWKHWRRO7KH
#2 morse taper shank is an additional charge. See price list.
Please specify when ordering CAT NO. AC820#2
%ODQNNQLYHVDUHDYDLODEOHIRUFXVWRPJULQGLQJ\RXURZQSURÀOHV
For mass production of rosettes, ask about our Automatic Rosette
Machines.
Carbide and S-Alloy tipped brazed cutters are also available. Call
for pricing.
6WDQGDUG3URÀOHVIRU5RVHWWH7RRO+ROGHUV6ROGLQVHWVRI&DWDORJQXPEHUVVKRZQDUHIRU6WHHO.QLYHV
Please specify head size when ordering.
3-3/8"
2-1/4"
CAT.NO.
CB184R
CAT.NO.
CB180R
2-3/4"
2-1/4"
CAT.NO.
CB185R
CAT.NO.
CB181R
2-7/16"
3-1/4"
CAT.NO.
CB182R
CAT.NO.
CB186R
3-1/4"
2-1/4"
CAT.NO.
CB183R
30
CAT.NO.
CB187R
800-724-6438
www.cggschmidt.com
TENONER TOOLING
TOOLING, POWERMATIC HEADS
Charles G. G. Schmidt & Co. offers a wide range of tooling for most types of single and
double end tenoners. From the smallest to the largest, we have the expertise to equip
your machine with the best kinds of tools for your application.
Most of our tenoner tooling is custom made.
TENONING
F
COPING HEADS
NE
W
Custom Heads and Knives
!
A
Photo courtesy of Powermatic
Carbide tipped
staggered tooth
heads can be made
either single sided
(pictured) or reversible (with 2 blades).
Staggered design,
permits smooth
cuts, faster feed
rates and
out-lasts original heads with steel knives and spurs.
For a quote on new tenon heads specify:
• Maximum cutting circle
• R.P.M.
• Maximum tenon length
• Feed rate
• Spindle diameter
• Rotation
• Mounting method
E
C
D
B
REPLACEMENT PARTS
Pictured here is a small sampling of the types of cope tooling available from Schmidt. Let us grind knives for your stock
heads or switch to corrugated heads for easier setups. For longer runs and quick set up time, consider ground to pattern wing
cutters in S-alloy or carbide.
POWERMATIC TENONER HEADS - 2A
Update your Powermatic with Insert Tenon Heads
NE
W!
For Powermatic 2-A single end tenoner
We stock replacement Heads, Tenon Knives, Spurs, Cope
Heads and Cope Knives for the 2-A. We also carry a threaded adapter enabling wing cutters to be used on the cope
spindles. Our service department is available to set up new and
existing heads for a nominal charge.
DESCRIPTIONS
A
discontinued Tenon Head see new Insert version
B
Tenon Knives PM100 requires (2)
&
Ŷ6SXUV30UHTXLUHV
D
Cope Knives (straight)
E
2 Knife Cope Head without knives
F
2 Knife Corrugated Back Cope Head *
7KUHDGHG$GDSWHUIRUŶERUH
Assembly Service (includes setting knives and sharpening)
CAT. NO.
PM100
PM105
PM110
PM115
PM120
PM121
PM125
PM200
* This is a new type of head for Powermatic 2A Single End
Tenoner. It uses corrugated steel rather than knives with closed
VORWVŶWKUHDGFRUUXJDWLRQV6SHFLI\WRSRUERWWRP
CAT. NO.
ŶGLDPHWHU[ŶFHO;ŶERUHURZ
3 spur. Please specify top or bottom when
ordering.
PM250T for top
SPUR KNIVES
CAT. NO.
PM250B for bottom
DESCRIPTIONS
CAT. NO.
Replacement Insert
INKS415
Replacement Insert Screw
INKS415S
Replacement Spur
INKS414
Replacement Spur Screw
INKS414S
Insert Torx Wrench
INKS415TW
Spur Torx Wrench
INKS414TW
Hollow mortising chisels and bits available. See page 32
Replacement steel spurs and tenon knives can be made to your
drawing or sample.
Our expert service department is capable of sharpening and
resetting knives and spurs for like-new performance on just
about any type of tenon head.
31
SURFACING HEADS
MORTISING, SURFACING HEADS
HOLLOW MORTISING CHISELS & BITS
2XU FKLVHOV DQG ELWV DUH PDGH IURP WKH ÀQHVW TXDOLW\ WRRO VWHHOV
Requiring less horsepower, these extremely sharp tools produce
extra clean cuts in hard and soft woods. 6LQJOH ÁXWH GHVLJQ IRU
HIÀFLHQWFKLSUHPRYDO&KLVHOVDQGELWVVROGVHSDUDWHO\
BITS
CHISELS
BIT
DIAMETER
SHANK
DIAMETER
MORTISE
DEPTH
OVERALL
LENGTH
CAT. NO.
SIZE x SHANK
DIAMETER
MORTISE
DEPTH
OVERALL
LENGTH
CAT. NO.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
HMC250B
HMC313B
HMC375B
HMC500B
HMC625B
HMC750B
HMC1000B
Ŷ;Ŷ
Ŷ;Ŷ
Ŷ;Ŷ
Ŷ;Ŷ
Ŷ;Ŷ
Ŷ;Ŷ
Ŷ;Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
HMC250C
HMC313C
HMC375C
HMC500C
HMC625C
HMC750C
HMC1000C
Two sizes of rectangular mortising chisels and bits are available. 3/8" x 9/16 Cat No. HMC375X562
and 3/8" x 5/8".Cat No. HMC375X625 Sold in sets only.
HELPFUL INFORMATION FOR ALL WOODWORKERS
NE
W!
!
W
NE
Simply Board Feet
The Real Wood Bible
The Real Wood Bible is a comprehensive and
fascinating resource for anyone who enjoys
working with wood. Woodworkers, crafters,
interior designers and DIY- enthusiasts of all
skill levels will learn more about the wood they
XVHUHJXODUO\DQGGLVFRYHUWKHEHQHÀWVRI
species they hadn’t previously
considered. This book is a must for anyone using CAT. NO.
AC417
decorative or exotic woods.
Simply board feet is to lumber what the calculator
is to math!! Douglas E. Maxwell has done all the
math and put it in one easy resource to calculate
board feet for material from 1” to 25-1/2” wide by 1’
to 20’ long. 4/4, 5/4, 6/4, 8/4, 10/4, 12/4 and 16/4
- it’s all there and it’s ready to make your woodworking life easier!
CAT. NO.
AC415
PROFILING HEADS
2XUSURÀOLQJKHDGVDUHDQRWKHUHFRQRPLFDOZD\RIXVLQJVWDQGDUGFDUELGHLQVHUWVIRU
DSURÀOLQJVKDSLQJRSHUDWLRQ$YDLODEOHLQVWDQGDUGZLGWKV)RUSDWWHUQVKDSLQJXVH
bearing AC116.
W!
NE
• Always maintains same diameter.
• Change knives right on the machine.
• Four sided carbide knives. Replacement insert CAT NO. INKS415 See page 37.
:LQJ5RZ3URÀOLQJ+HDGV
Length
Diameter
CAT. NO.
Ŷ
Ŷ
IN402
INKS415
10
Ŷ
Ŷ
IN403
INKS415
14
Ŷ
Ŷ
IN404
INKS415
18
Ŷ
Ŷ
IN405
INKS415
22
Ŷ
Ŷ
IN406
INKS415
26
T-20 TORX WRENCH
CAT NO.
Replacement insert
INKS415TW
REPLACEMENT INSERT SCREW CAT NO.
32
Inserts per head
IN415S
800-724-6438
www.cggschmidt.com
SCHure-CUT - TRUE HELICAL CARBIDE INSERT SURFACING HEAD
For Quieter, Smoother and Cleaner Surfacing, nothing cuts like our new
SCHure-Cut Insert Heads. Milled and ground on the latest state of the art CNC
machinery, this new patented cutter head is designed to reduce noise and produce a superior
VXUIDFHÀQLVKDQGJLYH\RXWKHFRQYHQLHQFHRILQVHUWWRROLQJ
Features
• Made with Straight Bore or
Hydro-Lock Mounting System*
• Special Light Weight
Aluminum body.
/DUJHJXOOHWVIRUHIÀFLHQW
chip removal.
• Can be used in a roughing
RUÀQLVKLQJDSSOLFDWLRQ
( Ask for details )
• Inserts can be resharpened.
* Grease gun available. Cat No. MH816
SURFACING HEADS
SCHure-CUT
Tested against two popular surfacing tools, research shows that the new
SCHure-Cut Head is the quietest surfacing head you can put on your
moulder. Plus the slicing action of the True Helical cutting edge produces
DQH[WUHPHO\VPRRWKÀQLVK7HVWFXWZDVGHHSISPŶZLGH
rpm. 3 wing and 6 wing heads also available.
Hydro-Lock Bore
4 wing
Inserts
per wing
length
60mm
100mm
130mm
150mm
180mm
230mm
4
7
9
10
12
16
Straight Bore
4 wing
Inserts
per wing
length
60mm
100mm
130mm
150mm
180mm
230mm
4
7
9
10
12
16
137mm
diameter
CAT. NO.
N/A
N/A
N/A
N/A
N/A
N/A
150mm
diameter
CAT. NO.
SH4206H
SH4210H
SH4213H
SH4215H
SH4218H
SH4223H
163mm
diameter
CAT. NO.
SH4306H
SH4310H
SH4313H
SH4315H
SH4318H
SH4323H
195mm
diameter
CAT. NO.
SH4406H
SH4410H
SH4413H
SH4415H
SH4418H
SH4423H
137mm
diameter
CAT. NO.
SH4106
SH4110
SH4113
SH4115
SH4118
SH4123
150mm
diameter
CAT. NO.
SH4206
SH4210
SH4213
SH4215
SH4218
SH4223
163mm
diameter
CAT. NO.
195mm
diameter
CAT. NO.
QUOTED
ON
QUOTED
ON
REQUEST
REQUEST
Extra
(replacement insert)
CAT. NO.
SHTIPS
Replacement
Screw
CAT. NO.
SHSCREW
See price
list for reduced
prices on
all of our
SCHure-Cut
Heads.
33
INSERT HEADS
SURFACING & TENON
SURFACING HEADS
Made from aircraft aluminum, these heads are an excellent way to reduce noise and horsepower needed in your moulding
operation. They use solid carbide 4 sided inserts mounted in a staggered, spiral pattern which in most cases, depending
RQWKHPDFKLQHU\FDQSURGXFHDOLQHIUHHÀQLVK,QVHUWVFDQEHUHSODFHGRUURWDWHGRQRURIIWKHPDFKLQH)HHGVSHHGV
FDQDOVREHLQFUHDVHGGXHWRWKHUHGXFHGFXWWLQJSUHVVXUH&DQDOVREHPDGHIRUSURÀOLQJDQGSDWWHUQVKDSLQJ3OHDVH
specify bore size when ordering. Diameter always stays the same requiring minimal set up time. Made with either straight
or hydro-Lock bores. Effective number of cutting teeth is half the number of wings.
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Pictured with Hydro-Lock bores
Replacement
Insert Screw
CAT. NO.
Replacement Insert
see page 37
CAT. NO.
T-20 TORX
WRENCH
CAT. NO.
INKS415S
INKS415
INKS415TW
# OF
LENGTH WINGS
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
# OF
TEETH
6
6
6
4
4
4
6
6
6
4
4
4
6
6
6
24
30
36
16
20
48
24
30
60
16
20
48
24
30
60
Straight
Bore
Hydro
Bore
CAT. NO. CAT. NO.
IN650
N/A
IN651
N/A
IN652
N/A
IN653
N/A
IN654
N/A
IN655
N/A
IN656
N/A
IN657
N/A
IN658
N/A
IN659
IN659H
IN660
IN660H
IN661
IN661H
IN662
IN662H
IN663
IN663H
IN664
IN664H
TENON HEADS
Made from aircraft aluminum these convenient to use insert
tenon heads can be made for any single or double end
tenoner. Staggered tooth design makes less noise and
requires less horsepower. Four sided solid carbide inserts
and spurs are rotated as they become dull. Set screw
mounting is available.
Effective number of cutting teeth is half the number of wings.
Please specify bore size when ordering.
• Lightweight
• No need to send out for sharpening
• Easy to use
• Diameter always stays the same
• Minimal set up time
2Ŷ&877,1* 3Ŷ&877,1*
Diameter
ŶŶ
ŶŶ
ŶŶ
Ŷ
# of WINGS # of SPURS
6
3
6
3
6
3
8
4
Insert Torx Wrench
34
CAT NO. INKS415TW
EDGE
CAT. NO.
IN600A
IN601A
IN602A
IN603A
EDGE
CAT. NO.
IN600B
IN601B
IN602B
IN603B
4Ŷ&877,1*
EDGE
CAT. NO.
IN600C
IN601C
IN602C
IN603C
Spur Torx Wrench CAT NO.
Replacement
Insert
CAT. NO.
Replacement
Insert Screw
CAT. NO.
INKS415
INKS415S
Replacement
Spur
CAT. NO.
Replacement
Spur Screw
CAT. NO.
INKS414
INKS414S
INKS414TW
800-724-6438
www.cggschmidt.com
INSERT HEADS
REBATING, ADJUSTABLE GROOVER & ANGLE
These cutters are ideal for applications where constant diameter is important. The use of
industry standard carbide inserts make this tool inexpensive and easy to use. The spurs insure
clean, smooth cuts, even in cross grain applications. They are an excellent choice for moulder
side heads in straight cut (S4S) applications. Cutters are stocked in bore sizes listed. The *
indicates these tools can be bored or manufactured with other bore sizes for a nominal charge.
DIAMETER
85mm
100mm
125mm*
BORE KNIVES SPURS LENGTH BEARING
50mm
4
2
AC114A
Ŷ
50mm
4
2
AC116B
Ŷ
50mm
4
2
AC125
Ŷ
CAT. NO.
IS58085
IS58100
IS58125
Replacement Knives
CAT. NO.
50mm Straight Knife
INKS250
14mm x 14mm Spur
INKS414
STACKABLE SURFACING HEADS
Our Stackable heads are another economical way of using standard carbide inserts for a
surfacing operation. Available in 30mm and 50mm widths these heads stack on the arbor to
the desired length.
• Always maintains same diameter.
• Change knives right on the machine.
• Double sided carbide knives.
Replacement
• For horizontal or vertical heads.
Gib
DIAMETER
125mm
125mm
125mm
125mm
BORE
40mm
40mm
Ŷ
Ŷ
KNIVES
4
4
4
4
Replacement Gib Screw CAT NO.
KERF
50mm
30mm
50mm
50mm
INSERT
INKS250
INKS230
INKS250
INKS250
CAT. NO.
IS1255
IS1253
IS1255A
IS1255B
CAT NO.
IS1265
IS1263
IS125S
ADJUSTABLE GROOVERS
ADJUSTABLE WIDTH
Our adjustable groovers come complete with spurs for smooth cutting with
DQG DFURVV WKH JUDLQ 6SDFHUV VXSSOLHG ZLWK WKH WRRO DOORZ IRU ÀQH DGMXVWPHQWRIJURRYHVXSWRŶGHHS'HSWKYDULHVIURPŶWRŶ
DIA.
180mm
160mm
160mm
160mm
160mm
BORE
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
INSERTS INSERT NO. SPURS SPURS NO.
8
4
4
4
4
INKS418
INKS207
INKS412
INKS215
INKS220
4
4
4
4
4
INKS410
INKS414
INKS414
INKS414
INKS414
MIN-MAX CUT
CAT. NO.
4mm to 7.5mm
8mm to 15mm
12.5mm to 24mm
16mm to 30mm
21mm to 39mm
IG660
IG662
IG664
IG666
IG668
ADJUSTABLE ANGLE CUTTER
This is the most versatile indexible angle cutter
DYDLODEOH,QÀQLWHO\DGMXVWDEOHXVLQJDQDOOHQNH\
from -90° to +90° with a vernier scale for accurate adjustment. This unit uses standard 50mm
double sided solid carbide inserts,
CAT NO. INKS250 (See page 37).
DIAMETER
160mm
BORE
Ŷ
KNIVES
2
INSERT
INKS250
KERF
50mm
CAT. NO.
IT35160
35
INSERT HEADS
DEDICATED INSERT AND FLOORING CUTTERS
2XULQVHUWKHDGVZLOOVDYH\RXPRQH\DQGWLPHLQDSSOLFDWLRQVZKHUHFRQVLVWHQWSURÀOHVDUHQHHGHGRYHU
very long runs, and in abrasive man-made materials. There is no need for extra cutters, and down time is
minimized because of the accuracy and repeatability of our inserts. Available in C4 carbide, these knives,
made to industry standards, are always readily available and will last many
times longer than comparable brazed tooling. Depending on width and
GHSWKRISURÀOHPXOWLSOHFXWWLQJHGJHVFDQEHSXWRQDQLQVHUWPDNLQJWKHP
even more economical.
DEDICATED heads are ideal for patterns which incorporate a tongue and
JURRYHGHWDLO.QLIHLQVHUWVDUHVXSSRUWHGFRPSOHWHO\E\WKHSURÀOHGERG\
of the tool and no additional backing plates are required. Standard gibs
DUHLQFOXGHGEXWSURÀOHGJLEVDUHUHFRPPHQGHGIRUVWLOHDQGUDLONQLYHV
3 Knife str.
bore
3 Knife
hydro
4 Knife str.
bore
4 Knife
hydro
length
40mm
CAT.NO.
ID430
CAT.NO.
ID430H
CAT.NO.
CAT.NO.
N/A
N/A
60mm
40mm
ID431
ID432
ID433
ID431H
ID432H
ID433H
N/A
N/A
ID442H
ID434
ID435
ID434H
ID435H
ID436H
Dedicated Heads
Diameter
Ŷ/JŶ6P
Ŷ/JŶ6P
Ŷ/JŶ6P
Ŷ/JŶ6P
Ŷ/JŶ6P
Ŷ/JŶ6P
Ŷ/JŶ6P
Ŷ/JŶ6P
60mm
40mm
60mm
40mm
60mm
ID436
ID437
ID437H
ID442
ID443
ID444
ID445
ID446
ID447
ID443H
ID444H
ID445H
ID446H
ID447H
When purchased
with head.
CAT NO. IPG100
When purchased
separately for an
existing head.
CAT NO. IPG101
See page 37 for
insert styles.
FLOORING CUTTERS
8VHRXUVWDQGDUGŶGLDPHWHUPPZLGHWKUHHNQLIHGHGLFDWHGKHDG CAT NO. ID8240 with your choice
RIERUHGHSHQGLQJRQWKHPDFKLQH2XUXQLYHUVDOLQVHUWLVJURXQGZLWKERWKSURÀOHVDWRWDORIIRXUFXWWLQJRQ
the same insert. See picture. In moulder applications all four patterns can be used without adjusting spindle
KHLJKWV5XQXSWRIWRIÁRRULQJZLWKRQHVHWRILQVHUWV0DGHIURPLPSDFWUHVLVWDQWFDUELGH7KHVH
KHDGVFDQEHGHVLJQHGWRPDWFKH[LVWLQJSURÀOHV
W
NE
!
1/32"
1/4"
3/4"
CAT. NO.
IC240
STANDARD WOOD PROFILE
36
800-724-6438
www.cggschmidt.com
CARBIDE INSERTS
SOLID CARBIDE INDEXIBLE & PROFILED
SOLID CARBIDE INDEXIBLE INSERTS
TURNABLE STRAIGHT KNIVES
Indexable inserts are available in a variety of sizes. See chart for complete selection.
KVS/PKG CAT.NO.
A
B
C
STYLE
2
Ŷ[[PP
INKS202
S2
2
Ŷ[[PP
INKS205
S2
S2
10
7.65 x 12 x 1.5mm
INKS207
S2
10
12 x 12 x 1.5mm
INKS412
S4
10
15 x 12 x 1.5mm
INKS215
S2
10
20 x 12 x 1.5mm
INKS220
S2
10
30 x 12 x 1.5mm
INKS230
S2
S4
10
40 x 12 x 1.5mm
INKS240
S2
10
50 x 12 x 1.5mm
INKS250
S2
A
10
14 x 14 x 2.0mm
INKS414
S4
10
15 x 15 x 2.5mm
INKS415
S4
B
35°
C
A
B
30°
C
All inserts have a hole size of 4.0mm, except INKS414, which has a hole size of 6.5mm with chamfer.
SOLID CARBIDE PROFILED INSERTS
PROFILED inserts are available in a variety of sizes. See chart for complete selection.
Pricing carbide inserts for our heads can be
30mm
35mm
40mm
42.87mm
&DUELGH3URÀOHG,QVHUWV
done using this chart. Determine the insert
Cutting Edge Width
CAT. NO.
CAT. NO.
CAT. NO.
CAT. NO.
VL]HE\ÀWWLQJ\RXUSURÀOHRQWKHLQVHUWVEHORZ
60mm ss (simple)
IC640SS
Determine if your insert will have 1, 2, or 4
PPVVÀWWHG
SURÀOHVDQGZKHWKHULWVDVLPSOHRUDÀWWHG
IC640SO
shape to manufacture and match a number to
60mm ds (simple)
IC642DS
IC635DS
that size insert. Add the cost of backing plates
PPGVÀWWHG
IC642DO
IC635DO
DQGSURÀOHGJLEVLIQHHGHG
40mm ss (simple)
IC435SS
ds= double sided ss= single sided
PPVVÀWWHG
Maximum depth of cut for a double sided
IC435SO
LQVHUWLVŶ
40mm ds (simple)
IC430DS
IC435DS
Maximum depth of cut for the largest single
PPGVÀWWHG
IC430DO
IC435DO
VLGHGLQVHUWLVŶ
*0LQLPXPTXDQWLW\SLHFHVSHUSURÀOH
40mm x 35mm Single Sided insert
0D[LPXP:LGWK PPŶ
0D[LPXP'HSWK PPŶ
60mm x 42.87mm Double Sided insert
0D[LPXP:LGWK PPŶ
0D[LPXP'HSWK PPŶ
40mm x 30mm Double Sided insert
0D[LPXP:LGWK PPŶ
0D[LPXP'HSWK PPŶ
SURÀOHDUHD
SURÀOHDUHD
SURÀOHDUHD
35
42.87
30
SURÀOHDUHD
SURÀOHDUHD
40
40
60mm x 40mm Single Sided insert
0D[LPXP:LGWK PPŶ
0D[LPXP'HSWK PPŶ
60
0D[LPXP:LGWK PPŶ
0D[LPXP'HSWK PPŶ
0D[LPXP:LGWK PPŶ
0D[LPXP'HSWK PPŶ
SURÀOHDUHD
SURÀOHDUHD
SURÀOHDUHD
40
35
35
60
SURÀOHDUHD
SURÀOHDUHD
40
60
37
INSERT CUTTERS
PANEL RAISING
W
NE
2XUQHZ'XDO3URÀOH3DQHO5DLVLQJ&XWWHUVDUHHDFK
made to support and cut two different patterns. Three body
FRQWRXUVZRRGSURÀOHVDYDLODEOHGLDPHWHUERUH
15° hook, 10° shear.
A 2-1/2" bearing (CAT.NO. AC111) is used for pattern
shaping. C-4 carbide inserts stand up to today’s tough to cut
materials. Standard rotation in counter clockwise rotation
cutting over the wood. Order body for corresponding insert.
Inserts not included in body price. Precision machined and
ground on the latest CNC equipment.
!
Replacement Insert Screw CAT. NO.
IC210SR
1/2"
5/8"
1-3/8"
1-3/8"
3/8"
CAT. NO.
IC210
BODY NO.
ŶUDLVHDERYHWRQJXH
IC210B
3/4"
BODY NO.
IC210B
3/8"
ŶUDLVHDERYHWRQJXH
CAT. NO.
IC21114
5/8"
1-3/8"
BODY NO.
IC211B
1-3/8"
3/8"
ŶUDLVHDERYHWRQJXH
CAT. NO.
IC211
3/8"
ŶUDLVHDERYHWRQJXH
BODY NO.
IC211B
CAT. NO.
IC21138
3/4"R
3/4"
5/8"
5°
1-3/8"
BODY NO.
IC213B
ŶUDLVHDERYHWRQJXH
1/2"
1-3/8"
3/8"
CAT. NO.
IC213
BODY NO.
IC213B
ŶUDLVHDERYHWRQJXH
3/8"
CAT. NO.
IC21338
PANEL CRAFTER 609
5LGLQJRQDFXVKLRQRIDLUWKLVÀ[WXUHDOORZVWKHXVHU
complete control when shaping the parts for raised
panel doors. Whether you’re shaping the panels or
the rails, your parts are automatically centered and
KHOGVHFXUHO\LQWKLVSRXQGXQLW0RYLQJWKLVÀ[ture requires very little effort as there is virtually no
drag due to the .002/.003 cushion of air. Comes with
a complete set of Independence style templates.
Additional templates are also available at additional
cost. Call us for a list of templates.
DESCRIPTION CAT. NO.
Panel Crafter
AC830
• Air pressure required 85 PSI
&DSDFLW\0D[ŶWKLFN;ŶZLGH
• Made from aircraft aluminum
• Can be used for coping
• Built with safety in mind
2WKHU´&UDIWHUŶXQLWVIRUFRSLQJDQGGRRUVXSWRŶZLGHFDQEHVSHFLDORUGHUHG
38
800-724-6438
www.cggschmidt.com
Using ONLY Two 3-Wing Steel Bodies
<RX&DQ&XW$Q\RI7KHVH6L[3URÀOHVZLWK2XU
new Insert Stile and Rail Cutters for Cabinet Doors
0DQXIDFWXUHGWRSUHFLVLRQWROHUDQFHVWKHVHDOOR\VWHHOERGLHVFDQDFFRPPRGDWHDQ\RIWKHVL[SURÀOHVVKRZQ
without backer plates. Using the stile cutter to cut the pattern cuts and the rail cutter to cut the cope cut, these
FXWWHUVSURGXFHDSHUIHFWÀWHYHU\WLPH$OOLQVHUWVDUHJURXQGWRVDPHFHQWHUOLQHIRUHDVHRIVHWXS&DUELGHRU
S-Alloy tips are available for cutting all types of woods and
man made materials. All inserts are
30mm wide to accommodate material
WKLFNQHVVHVIURPŶWRŶ,QVHUWVDUHQRW
included in cost of bodies. Cutters are
made to run in a counter clockwise rotation
with the wood face down.
INSERT CUTTERS
INSERT STILE AND RAIL
Sharpening of inserts is not recommended.
&XVWRPSURÀOHVDVSHU\RXUUHTXHVW
&XWWHU6SHFLÀFDWLRQV
Ŷ'LDPHWHU &XWWLQJDQJOH
Ŷ%RUH:LQJV
• Black Oxide Finish
• Body Thickness 30mm
ŶPLQGLD8VHEHDULQJ$&
• Bushings for other bore sizes
available
PROFILE NO. ISR10
Stile Insert CAT NO. ISR10S
Rail Insert CAT N0. ISR10R
PROFILE NO. ISR40
Rail Insert CAT NO. ISR40R
PROFILE NO. ISR20
PROFILE NO. ISR50
PROFILE NO. ISR30
PROFILE NO. ISR60
7RRUGHUFDUELGHLQVHUWVDGGWKHOHWWHU´&ŶWRWKHHQGRIWKHLQVHUWSDUWQXPEHU([DPSOH,656&
7RRUGHU6$OOR\LQVHUWVDGGWKHOHWWHU´6ŶWRWKHHQGRIWKHLQVHUWSDUWQXPEHU([DPSOH,6566
Stile head
CAT. NO.
ISRH10S
Rail head
CAT. NO.
ISRH10R
39
BORING BITS
ROUTER TOOLING / BORING BITS
CORRUGATED BACK ROUTER HEAD AND KNIVES
'HVLJQHGVSHFLÀFDOO\WREHXVHGRQ&1&5RXWHUVFDSDEOHRIDFFHSWLQJŶVKDIWVWKLVWRRODOORZVWKHXVHRI
conventional corrugated knives on this type of machine. Most mill shops are already using corrugated steel
somewhere in their shop whether on a shaper, tenoner or moulder. An inexpensive way to produce samples or
small runs using steel knives or use our carbide knives for long production runs. We offer the complete system
WRJHW\RXXSDQGUXQQLQJIDVW.QLYHVIRUERWKVWUDLJKWFXWVDQGSURÀOLQJDUHUHDGLO\
RH100
available. Clockwise and counterclockwise rotations available.
6SHFLÀFDWLRQV
Ŷ&XWWLQJFLUFOH $OOR\6WHHO&RQVWUXFWLRQ
Ŷ6KDIW
ŶDQGŶWKLFNFRUUXJDWHGNQLYHV
KNIVES FOR STRAIGHT CUTTING
CAT.NO.
RH100 CW
W! RH101 CC
NE
ÝFXWWLQJDQJOH
ŶFXWWLQJZLGWK
&XWXSWRŶGHHSSDWWHUQV
5HFRPPHQGHG530WR0D[
Sold in pairs
Steel
Carbide
DIMENSIONS
CAT. NO.
CAT. NO.
Ŷ[Ŷ[Ŷ
CB155
CT155
KNIVES FOR PROFILE CUTTING
DIMENSIONS
Pattern Depth
Ŷ[Ŷ[Ŷ
0D[Ŷ
0D[Ŷ
0D[Ŷ
Ŷ[Ŷ[Ŷ
Ŷ[Ŷ[Ŷ
Sold in pairs
Steel
Carbide
CAT. NO.
CAT. NO.
CB260
CB265
CT260
CT265
CB270
CT270
V-GROOVE / 45° CHAMFER ROUTER BIT
Designed for V-grooving and folding. Using a special insert with 15°
bevels producing a perfect 90° angle. Can also be used to chamfer
PDWHULDOXSWRŶWKLFNFXWWLQJHGJHVSHULQVHUW
Dia.
Shank Width
50mm
Ŷ
25mm
Insert
Tool
CAT. NO.
CAT. NO.
IR400
IRC4012
ROUTER BIT ADAPTERS
Turn your shaper into a router with our router bit adapters, made for Delta light and heavy
GXW\VKDSHUVDQG3RZHUPDWLF)RUURXWHUELWVZLWKŶDQGŶVKDQNV
ADAPTERS
Powermatic router bit adapter w/split sleeve
Delta HD router bit adapter w/split sleeve
Delta LD router bit adapter w/split sleeve
6SOLWVOHHYHIRUŶELWV
CAT. NO.
AC300
AC301
**AC302
AC303
**Requires false table to lower bit below table height. Not for use on Platinum series machines
CARBIDE TIPPED BORING BITS With shank adjusting screw. Additional sizes available. Call for prices.
Brad Point (Dowel) designed for chip free
boring for shelf pins and dowels, etc.
Diameter Length CAT.NO. RH CAT. NO. LH
5mm
57mm BBP055R
BBP055L
5mm
70mm BBP057R
BBP057L
8mm
57mm BBP085R
BBP085L
8mm
70mm BBP087R
BBP087L
60° Point for Thru Bores. V-Point drill designed
to eliminate chip out on double sided material.
Diameter Length CAT.NO. RH CAT. NO. LH
5mm
57mm BBT055R
BBT055L
5mm
70mm BBT057R
BBT057L
8mm
57mm BBT085R
BBT085L
8mm
70mm BBT087R
BBT087L
40
800-724-6438
Hinge Boring Bit
with Center Point
Diameter Length CAT. NO.
35mm
57mm BHB0035
www.cggschmidt.com
SOLID CARBIDE ROUTER
SOLID CARBIDE ROUTER BITS
SOLID CARBIDE SPIRAL ROUTER BITS
Schmidt is proud to introduce our new solid carbide spiral router bits. Our bits are
precision ground to high tolerances to produce an excellent cutting edge for a longer
lasting tool life. We offer our bits in upcut, downcut and also compression style. We
also carry solid carbide bits for template cutting machines.
• Upcut - Designed for routing, grooving and slotting in both hard and soft woods, plastics, non porous material,
and composites. Use where chips must be pulled toward shank.
• Downcut - Designed to hold material down during templating and thru cutting.
&RPSUHVVLRQELWV'HVLJQHGWRSURGXFHDKLJKTXDOLW\ÀQLVKRQWZRVLGHGPDWHULDOZLWKPLQLPDOFKLSSLQJ
• Ruffer - Designed to allow for extremely fast hogging in solid wood and wood composites.
• Sharpening available for a fraction of the cost of new bits with minimal diameter loss.
COMPRESSION SPIRAL
SINGLE FLUTE ROUTER BITS
DOUBLE FLUTE UPCUT OR DOWNCUT
CUTTING
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CUTTING SHANK
LENGTH
SIZE
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
UPCUT
OAL
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
DOWNCUT
CAT. NO. CAT. NO.
RS101U
RS102U
RS103U
RS104U
RS105U
RS106U
RS107U
RS108U
RS109U
RS110U
RS111U
RS112U
RS113U
RS114U
RS115U
RS116U
RS117U
RS101D
RS102D
RS103D
RS104D
RS105D
RS106D
RS107D
RS108D
RS109D
RS110D
RS111D
RS112D
RS113D
RS114D
RS115D
RS116D
RS117D
CUTTING CUTTING SHANK
DIA.
SIZE
LENGTH
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
OAL
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
CAT. NO.
RS206
RS208
RS210
RS211
RS216
COMPRESSION SPIRAL
DOUBLE FLUTE ROUTER BITS
OAL CAT. NO.
SIZE
DIA.
LENGTH
Ŷ RS308
Ŷ
Ŷ
Ŷ
Ŷ
RS309
Ŷ
Ŷ
Ŷ
Ŷ
RS310
Ŷ
Ŷ
Ŷ
Ŷ RS311
Ŷ
Ŷ
Ŷ
Ŷ
RS312
Ŷ
Ŷ
Ŷ
RS313
Ŷ
Ŷ
Ŷ
Ŷ
RS316
Ŷ
Ŷ
Ŷ
Ŷ
COMPRESSION SPIRAL
THREE FLUTE ROUTER BITS
THREE FLUTE UPCUT OR DOWNCUT RUFFER
CUTTING
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
FLUTE SHANK
LENGTH
DIA.
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
UPCUT
OAL
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
DOWNCUT
CAT. NO. CAT. NO.
RS501U
RS502U
RS503U
RS504U
RS505U
RS501D
RS502D
RS503D
RS504D
RS505D
DIA.
LENGTH
SIZE
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
OAL CAT. NO.
RS401
Ŷ
RS402
Ŷ
Ŷ RS403
RS404
Ŷ
RS405
Ŷ
RS406
Ŷ
RS407
Ŷ
Custom Router Bits have always been a specialty for the toolmakers at Charles G. G.
Schmidt & Company. Whether you need to do a custom hand rail, cabinet stiles and rails or
just a unique door edge, we can make the bit you need. Send us a sketch, wood sample or
';)ÀOHDQGZHZLOOGHVLJQDQGPDQXIDFWXUHWKHWRROWR\RXUVSHFLÀFDWLRQVZLWKFDUELGH
S-Alloy or diamond tips. Ask us about custom router bits, both brazed and insert styles for your
CNC router. We can also supply collets and tool holders.
41
ROUTER BITS
DIAMOND TIPPED
W!
NE
DIAMOND TIPPED ROUTER BITS
Our Polycrystalline Diamond Tooling will cut a wide variety of tough, abrasive materials including
SDUWLFOHERDUGPHGLXPGHQVLW\ÀEHUERDUG0')SO\ZRRGDQGSODVWLF8SGRZQFRPSUHVVLRQ shear provides clean
cuts on double-sided melamine panels while the cutting edge lasts up to 150 times longer than carbide. Diamond
boring point allows for plunging straight down. What may seem expensive is really a way to save money. Your
machine runs longer, you cut more parts and tool changes are much less frequent.
Polycrystalline Diamond is the most economical choice.
These tools can be resharpened 2 or 3 times.
Standard PCD Router Bits
CAT. NO.
Cutting
Diameter
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
DT1003D
DT1005D
DT1010D
DT1015D
DT1020D
DT1025D
DT1030D
DT1035D
DT1040D
DT1045D
DT1050D
DT1055D
DT1060D
DT1065D
DT1070D
DT1075D
DT1080D
Cutting
Length
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Shank
Diameter
Overall
Length
1/2Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
3Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Ŷ
Standard T-Slot PCD Router Bits
Make slot wall fast and easy with our standard T-slot wall cutters.
Constructed with large PCD tips to allow greater stability. Use with particleboard
MDF, both raw or with melamine, veneer, hardwoods, etc. Two standard
VL]HVWRFKRRVHIURP5LJKWKDQGDQGOHIWKDQGURWDWLRQVDYDLODEOHŶ
shanks.
Custom sizes quoted on request.
42
CAT. NO.
Cutting
Diameter
DT1090
DT1095
Ŷ
Ŷ
Neck
Diameter
Ŷ
Ŷ
Cutting
Length
Ŷ
Ŷ
Neck
Length
Ŷ
Ŷ
!
W
NE
Overall
Length
Ŷ
Ŷ
800-724-6438
www.cggschmidt.com
TOOL HOLDERS
TOOL HOLDERS & ARBORS FOR CNC
BT 30 & 35 TOOLHOLDERS FOR CNC ROUTERS Dimensions in millimeters
Description
D
A
F
N
Collet Nut
Wrench
TE06106W
BT 30 x ER 20-70mm w/o slots
46
70
20
35
TE46120
TE04614
TE06112
BT 30 x ER 32-60mm with slots
46
60
20
50
TE46132
TE04616
TE06113W60
46
60
20
50
TE46132
TE04616
TE06113W90
46
90
20
50
TE46132
TE04616
TE06113
46
70
20
50
TE46132
TE04616
TE06001W
BT 30 x SYOZ 25-70mm w/o slots
46
70
20
60
Included
TE03691
TE06001
BT 30 x SYOZ 25-70mm
46
70
20
60
Included
TE03691
TE06010
BT 35 x SYOZ 25-76mm
53
76
22
60
Included
TE03691
TE061BT353276
BT 35 x ER 32-76mm
53
76
22
50
TE46132
TE04614
CAT.NO.
NE
W!
BT30
HSK 50F, 63F Toolholders for CNC Routers Dimensions in millimeters
D
A
F
N
Collet Nut
TE40050
HSK 50 F X ER 32-80mm
Description
50
80
26
50
TE46132
TE04616
TE17105008001
63
60
26
32
TE46116
TE04613
CAT.NO.
Wrench
TE17105008002
63
100
26
32
TE46116
TE04613
TE30000
63
70
26
50
TE46132
TE04616
TE30001
63
76
26
63
TE46140
TE04617
TE30002
63
90
26
63
TE46140
TE04617
TE30005
63
125
26
63
TE46140
TE04617
TE41025
HSK 63 F X SYOZ 25-80mm
63
80
26
60
TE03638
TE03691
HSK
HSK 63F Arbors
NE
W
Description
CAT.NO.
D
L
N
B
GL
55mm
42mm
20mm
45
TE41060
+6.)ŶDUERU[PP
Ŷ
TE410803H
+6.)ŶDUERU[PP
Ŷ
80mm
42mm
20mm
45
TE41085
+6.)ŶDUERU[PP
Ŷ
100mm
42mm
20mm
45
TE41087
+6.)ŶDUERU[PP
Ŷ
112mm
42mm
20mm
45
!
HSK
Arbor
ISO 30 Arbors
L
GL
D
B
N
TE1270040
,62Ŷ[PPDUERU
Description
40mm
42mm
Ŷ
20mm
42mm
TE1270055
,62Ŷ[PPDUERU
55mm
42mm
Ŷ
20mm
42mm
CAT.NO.
TE1270080
,62Ŷ[PPDUERU
80mm
42mm
Ŷ
20mm
42mm
TE12700100
,62Ŷ[PPDUERU
100mm
42mm
Ŷ
20mm
42mm
BT Shank Pull Studs
Dimensions in Millimeters
CAT.NO.
Type
D
d1
d2
d3
L
l1
l2
T
TE07801
%7ŵ
16.5
11
7
12.5
43
23
18
M12
TE07803
%7ŵ
23
15
10
17
60
35
28
M16
TE07805
%7ŵ
38
23
17
25
85
45
35
M24
TE07806
%7ŵ
16.5
11
7
12.5
43
23
18
M12
TE07808
%7ŵ
23
15
10
17
60
35
28
M16
TE07810
%7ŵ
38
23
17
25
85
45
35
M24
TE07812
%7ŵ
16.5
11
7
12.5
43
23
8
M12
TE07814
%7ŵ
23
15
10
17
35
35
28
M16
Pull Stud
NE
W!
43
COLLETS
ER PRECISION INCH COLLETS AND COLLET SETS
!
W
NE
6WDQGDUGŶ7,5
8OWUD3UHFLVLRQŶ7,5
&ROODSVHUDQJHŶ
*For ultra precision collets place UP in
front of the regular part number
ER PRECISION COLLETS INCH SIZE
ER 11
ER 16
ER 20
ER 25
ER 32
ER 40
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
CAT.NO.
TE04211116
TE04216116
TE04211332
TE04216332
TE0421118
TE04211532
Range
Drill
Shank
Ŷ
Ŷ
Ŷ
Ŷ
TE04220332
TE04225332
TE04232332
TE0421618
TE0422018
TE0422518
TE0423218
TE0424018
Ŷ
Ŷ
TE04216532
TE04220532
TE04225532
TE04232532
TE04240532
Ŷ
Ŷ
TE04211316
TE04216316
TE04220316
TE04225316
TE04232316
TE04240316
Ŷ
Ŷ
TE04211732
TE04216732
TE04220732
TE04225732
TE04232732
TE04240732
Ŷ
Ŷ
TE0421114
TE0421614
TE0422014
TE0422514
TE0423214
TE0424014
Ŷ
Ŷ
TE04216932
TE04220932
TE04225932
TE04232932
TE04240932
Ŷ
Ŷ
TE04216516
TE04220516
TE04225516
TE04232516
TE04240516
Ŷ
Ŷ
TE042161132 TE042201132 TE042251132
TE042321132
TE042401132
Ŷ
Ŷ
TE0421638
TE0423238
TE0424038
Ŷ
Ŷ
TE042161332 TE042201332 TE042251332
TE042321332
TE042401332
Ŷ
Ŷ
TE04220716
TE04232716
TE04240716
Ŷ
Ŷ
!
W
NE
TE0422038
TE0422538
TE04225716
TE042201532 TE042251532
TE042321532
TE042401532
Ŷ
Ŷ
TE0422012
TE0422512
TE0423212
TE0424012
Ŷ
Ŷ
TE042251732
TE042321732
TE042401732
Ŷ
Ŷ
TE04225916
TE04232916
TE04240916
Ŷ
Ŷ
TE042251932
TE042321932
TE042401932
Ŷ
Ŷ
TE0422558
TE0423258
TE0424058
Ŷ
Ŷ
TE042322132
TE042402132
Ŷ
Ŷ
TE042321116
TE042401116
Ŷ
Ŷ
TE042322332
TE042402332
Ŷ
Ŷ
TE0423234
TE0424034
Ŷ
Ŷ
TE0424078
Ŷ
Ŷ
TE042401
Ŷ
Ŷ
Ultra High-Speed ER Coated Nuts
44
&ODPSLQJ5DQJHLVŶIRU(5
16, 20, 25, 32 and 40
Compatible with DR, RD, ESX,
AR and BR series collets
All collets inspected for quality
and accuracy
CAT.NO.
Description
D
B
M
Max.
Speed
Wrench
Max. Torque*
TE46111
ER RH 11 B Nut
19mm
11.8mm
M14 x 0.75
70,000
TE04608
20 ft/lbs
TE46116
ER RH 16 B Nut
32mm
18.0mm
M22 x 1.5
65,000
TE04613
50 ft/lbs
TE46120
ER RH 20 B Nut
35mm
19.5mm
M25 x 1.5
60,000
TE04614
75 ft/lbs
TE46125
ER RH 25 B Nut
42mm
20.5mm
M32 x 1.5
55,000
TE04615
95 ft/lbs
TE46132
ER RH 32 B Nut
50mm
23.0mm
M40 x 1.5
50,000
TE04616
125 ft/lbs
TE46140
ER RH 40 B Nut
63mm
26.0mm
M50 x 1.5
40,000
TE04617
140 ft/lbs
800-724-6438
www.cggschmidt.com
BAND SAW BLADES
CARBON WOOD PRODUCTION & GENERAL PURPOSE
Ideal for wood production cutting as well as short production/maintenance applications
using low alloy steel & non-ferrous metals
These carbon steel blades are manufactured from a single piece of high carbon steel with individually
KDUGHQHGWRRWKWLSV7KHÁH[LEOHEDFNPDNHVWKHPPRUHIDWLJXHUHVLVWDQW7KHVHEODGHVDUHDSHUIHFWDOO
around band saw blade for all woodworking shops. Carbide tipped blades are readily available.
NE
W!
NUMBER OF TEETH & BLADE TYPE
4
6
8
10
12
14
18
24
W
W
W
W
W
W
STANDARD RAKER
INCHES
W
W
Ŷ;Ŷ
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Ŷ;Ŷ
Ŷ;Ŷ
W
W
W
Ŷ;Ŷ
W
W
W
W
W
10
12
14
18
24
W
W
W
W
W
W
W
W
W
W
W
W
W
W
HEF CARBON HARD EDGE, FLEXIBLE BACK
2
3
4
6
2
HOOK
W
3
4
6
SKIP
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Weld to length pricing
õŶ
Ŷ
Ŷ
Ŷ
ôŶ
Ŷ
Ŷ
Ŷ
öŶ
Ŷ
7'
BS107014
BS107038
BS107012
BS107058
Ŷ
BS107514
BS107538
BS107512
8'
BS108014
BS108038
BS108012
Ŷ
BS108514
BS108538
Band Width
(Thickness)
32
STANDARD WAVY
Ŷ;Ŷ
Ŷ;Ŷ
8
Ŷ
(.035)
õŶ
( .035)
BS107034
BS107010
BS1070125
BS107558
BS107534
BS107510
BS1075125
BS108058
BS108034
BS108010
BS1080125
BS108512
BS108558
BS108534
BS108510
BS1085125
Length
9'
BS109014
BS109038
BS109012
BS109058
BS109034
BS109010
BS1090125
Ŷ
BS109514
BS109538
BS109512
BS109558
BS109534
BS109510
BS1095125
10'
BS110014
BS110038
BS110012
BS110058
BS110034
BS110010
BS1100125
Ŷ
BS110514
BS110538
BS110512
BS110558
BS110534
BS110510
BS1105125
11'
BS111014
BS111038
BS111012
BS111058
BS111034
BS111010
BS1110125
Ŷ
BS111514
BS111538
BS111512
BS111558
BS111534
BS111510
BS1115125
12'
BS112014
BS112038
BS112012
BS112058
BS112034
BS112010
BS1110125
Ŷ
BS112514
BS112538
BS112512
BS112558
BS112534
BS112510
BS1125125
13'
BS113014
BS113038
BS113012
BS113058
BS113034
BS113010
BS1130125
Ŷ
BS113514
BS113538
BS113512
BS113558
BS113534
BS113510
BS1135125
14'
BS114014
BS114038
BS114012
BS114058
BS114034
BS114010
BS1140125
Ŷ
BS114514
BS114538
BS114512
BS114558
BS114534
BS114510
BS1145125
15'
BS115014
BS115038
BS115012
BS115058
BS115034
BS115010
BS1150125
Ŷ
BS115514
BS115538
BS115512
BS115558
BS115534
BS115510
BS1155125
16'
BS116014
BS116038
BS116012
BS116058
BS116034
BS116010
BS1160125
Ŷ
BS116514
BS116538
BS116512
BS116558
BS116534
BS116510
BS1165125
17'
BS117014
BS117038
BS117012
BS117058
BS117034
BS117010
BS1170125
Ŷ
BS117514
BS117538
BS117512
BS117558
BS117534
BS117510
BS1175125
18'
BS118014
BS118038
BS118012
BS118058
BS118034
BS118010
BS1180125
Ŷ
BS118514
BS118538
BS118512
BS118558
BS118534
BS118510
BS1185125
19'
BS119014
BS119038
BS119012
BS119058
BS119034
BS119010
BS1190125
Ŷ
BS119514
BS119538
BS119512
BS119558
BS119534
BS119510
BS1195125
20'
BS120014
BS120038
BS120012
BS120058
BS120034
BS120010
BS1200125
Ŷ
BS120514
BS120538
BS120512
BS120558
BS120534
BS120510
BS1205125
21'
BS121014
BS121038
BS121012
BS121058
BS121034
BS121010
BS1210125
Ŷ
BS121514
BS121538
BS121512
BS121558
BS121534
BS121510
BS1215125
AT-A-GLANCE
• Flexible backs are
fatigue-resistant
• Individually hardened teeth
• Can be run at
speeds up to 15,000
SFM (Surface Feet
Per Minute)
• Low cost-per-blade/
low cost-per-cut in
wood. Higher cost-percut in metal
APPLICATIONS
• Wood
• Plastic
• Cork
• Composition Board
• Plywood
• Aluminum
• Non-ferrous metals
• Low alloy steel
45
MACHINES
ROSETTE MACHINES & STEFF POWER FEEDERS
Rosette manufacturing has never been easier or faster than with MIKRON’s Automatic Rosette Machines and our Multi-
3URÀOH5RVHWWH&XWWHUV. Built with dependable pneumatics and an air over hydraulic feed system, these machines feed the
EORFNRIZRRGXQGHUWKHFXWWHUKROGLWVHFXUHO\PDNHWKHFXWDQGHMHFWDÀUVWFODVVTXDOLW\URVHWWHDOOLQOHVVWKDQVHFRQGV
Our 2 knife, corrugated rosette knife holders are available in three sizes: 2-7/8", 3-1/2" and 4-3/4". The M-2 HS Steel knives cut
VPRRWKSURÀOHVXSWRGHHS$9+6YLGHRRUD&'520LVDYDLODEOHGHPRQVWUDWLQJWKHVHPDFKLQHV 'HSHQGLQJRQ
type of wood and depth of cut.
W!
NE
R200
R300
For 2-1/2" to 5" Blocks
• 3-1/2" Maximum pattern
diameter
RU0XOWL3URÀOH
Cutters
• 1/2" Shank
• 7500 RPM
For 5-1/2" to 8" Blocks
• 4-3/4" Maximum pattern
diameter
• 2-7/8", 3-1/2" or 4-3/4" Multi3URÀOH&XWWHUV
• 3/4" Shank
• 3600 RPM
General Information
• Production rates in excess of 300 to 500 pieces per
hour are obtainable depending on species of wood,
size of the cut and quality of the tooling.
• Two quick and simple adjustments allow for size
changes from 2-1/2" to 5" rosette blanks on the
R200 and 5-1/2" to 8" rosette blanks on the R300.
• Air requirements: 110psi
• Three horsepower. Single or three phase.**
• Adjustable time delay from 0 to 15 seconds for an
excellent cut in many types of wood.
• Each machine comes complete with one cutter head
and two sets of blank knives. Standard and custom
knives are available at additional cost. See our catalog.
• Floor space required is approximately 3’ x 3’
• Height: 30" without hopper.
• Weight: 200-225 lbs.
• Hopper capacity: 40 pieces, approximately 3/4" thick.
STEFF Power Feeders
NE
R200 Shown
CAT. NO.
R200 Rosette Machine RO100
R300 Rosette Machine RO101
** Specify Single or 3 Phase
W!
The Steff Power Feeder is a productive addition to any size shop. A versatile machine that can be used on shapers, table saws, and
planers to safely produce smooth, quality cuts. 3 and 4 roller machines in stock, single and 3 phase. Other models available.
Extra machine base for ease of moving feeder from machine to machine. CAT NO. PF2100
Model 2034
CAT NO.
Model 2044
PF1001
Model #2044
3/4 Horse Power
Single Phase
230 Volts
4 Roller
4 Speeds
12-26-36-72 FPM
Model #2034
3/4 Horse Power
Single Phase
230 Volts
3 Roller
4 Speeds
12-26-36-72 FPM
CAT NO.
PF2003
CAT NO.
PF1003
Model #2044
1 Horse Power
Three Phase
230 Volts
4 Roller
4 Speeds
12-26-36-72 FPM
Model #2034
1 Horse Power
Three Phase
230 Volts
3 Roller
4 Speeds
12-26-36-72 FPM
46
CAT NO.
PF2001
800-724-6438
www.cggschmidt.com
MACHINES
WILLIAMS & HUSSEY MOLDER/PLANER
Make Mouldings Fast and Easy with the
Williams & Hussey Molder/Planer
Built To Go The Distance. 7 year Warranty. Made in USA
Produces:
• Straight Moulding
• Round Top Moulding
• Elliptical Moulding *
• Casings
• Crowns
• Base Caps
• Handrails
• Astragals
• Raised Panels
• And More!
Dimensions:
•:RUNLQJ+HLJKWŶ
2YHUDOO+HLJKWŶ
2YHUDOO:LGWKŶ
2YHUDOO/HQJWKŶ
• Approx. Weight: 250 lbs.
* When used with the Arc Master
6SHFLÀFDWLRQV
Basic machine shown with stand, motor, standard gear box and
on/off switch. Ask about us about The New Model # 206 with the
Factory Installed, Variable Feed, Multi-Pass and GS-1 Guide
Systems. CAT NO. WH202 NE W
!
• 2 HP Motor
• 7000 rpm arbor
• 15 fpm feed rate
0D[SURÀOHGHSWKŶ
0D[SURÀOHZLGWKŶ
3ODQHVŶZLGH
0LQVWRFNOHQJWKŶ
0LQVWRFNWKLFNQHVVŶ
0D[VWRFNWKLFNQHVVŶ
• Multi-Pass System
NE
W!
Guide your wood straight and
securely with this optional
New GS-1 Guide System.
CAT NO. WH205
Over 170 Standard Knives
available. See pages 19-26
for a complete list.
Ask us about our Custom
knives in both Steel and
Carbide Tipped.
Send us a fax, wood
sample or DXF file via the
internet for a quote.
[email protected]
5HPRYHFKLSGHÁHFWRUDQG
change knives in minutes.
MACHINE, MOTORS & STAND
CAT. NO.
Model W-7S Molder/Planer
WH200
GS-1 Guide System
WH205
Spare Long Wear Feed Rollers
WH212G
2 HP Single Phase Motor
WH215
2 HP Three Phase Motor
WH216
Welded Mobile Stand w/ 2 rollers
WH221
Switch 110v or 220v, 1 phase
WH223*
Switch 220v, 3 phase
WH2233
View of basic machine from infeed end. Shown with
The Arc Master and the Feed Master Pro.
Superior design and top quality materials have made the
Williams & Hussey one of the safest, most versatile and economical combined-function woodworking machines you can
own. 100% American made, this machine has found a place in
VKRSV RI DOO VL]HV IRU RYHU ÀIW\ \HDUV 2QO\ PDFKLQHV FRVWLQJ
hundreds of dollars more begin to compare with the power and
versatility of this molder/planer. Each machine comes with a
GXVWKRRGZLWKDŶGLDPHWHURXWOHWWDEOHJXLGHVEHOWDQGSXOley assembly and gear box oil.
* Specify 110v or 220v
47
MACHINES
ARCMASTER & FEED MASTER
The ARCMASTER is a fixture designed to produce curved, elliptical, or even irregular shaped mouldings on the Williams & Hussey Molder/Planer. With this attachment, these once
difficult, even impossible wood shapes are safely produced with ease and accuracy.
For smooth, easy feeding we recommend using Sprayway 801 dry lubricant - CAT. NO. AC855.
Features:
• Rugged all steel construction
• Quickly adjusts to mouldings from
ŶWRŶZLGH
• Precision ball bearing guide system
• Built-in removable fence
• Installs easily in minutes
NE
• Completely mechanical with easy to adjust
spring tension
• Simple and safe to use
ŶPLQLPXPUDGLXV
• Made in the USA
• Once installed it never has to be removed
CAT NO. WH100
W!
A Variable Feed System for the Williams & Hussey Molder & Similar Machines
5HWURÀW\RXU:LOOLDPVDQG+XVVH\ZLWK7KH)HHGPDVWHU3URDesigned with safety and versatility in mind, The
Feedmaster Pro now lets you control the feed rate on your machine. Independent of the 2 horsepower motor
that drives the cutter head, this unit supplies its power directly to the feed rollers with consistent, even pressure,
and with an adjustable feed rate. Making a great machine even better. Available for 110v and 230v models,
single or three phase.
%HQHÀWV
Features:
• Installs in 60 minutes
• Simple and safe to use
• Feed speeds from 0 to
19 feet per minute
• Industrial grade metal
gears
The Ultimate Williams & Hussey complete with
The Arcmaster and Feedmaster Pro.
48
• Reduces number of
cutting passes
• Reduces wear and tear
on feed rollers
• Increases horsepower
to the cutter head
$VPRRWKHUÀQLVKIRU
many types of wood
CAT NO. WH150
110v
CAT NO. WH152
230v
800-724-6438
www.cggschmidt.com

1-201-391-5300 FAX: 1-201-391-3565

Transcription

Similar documents

Charles G.G. Schmidt Catalog

In the Ditch - All-Grip

Accessories catalogue

Transmission Line - Rosenberger Site Solutions

Make a Ray Jacobs` Rocky Mountain Dulcimer

Untitled - E