Precision Medical Coil Winders:

TM
M a c h i n e C o n t r o l Sp e c i a l i s t s I n c .
Medical Coil Winder Platforms
Model 105P
Production Medical Coil Winder
Model 105L-8
Laboratory Medical Coil Winder
Model 130
Continuous Medical Coil Winder
Model 105B
Benchtop Medical Coil Winder
Medical Coil Winder Platforms:
MCS offers four different platforms for Medical Coil Winding:
1. Model 105P is designed for discrete length high production winding
2. Model 105L is designed for discrete length laboratory or low volume production winding
3. Model 130 is designed for continuous length high production winding
4. Model 105B is designed for discrete length laboratory or development winding
Model 105B Benchtop Medical Coil Winder

MCS1 Embedded Control

Traverse length - 12 to 48” (300 to 1200mm)

Mandrel diameter - .001 to .250” (.025 to 6.35mm)

Wrap filament/wire - .001 to .025” (.025 to .635mm)

Accurate pitch calculation to .000001” (.0001mm)

Easily perform multiple pitch changes

Open, closed or variable pitch

Round or flat wrap wire

Programmable mandrel tension

Programmable wrap wire tension

Electronically synchronized spindle and tailstock

Single-filar or multi-filar

Manual collets

Options:
o
Closed loop servo payoff tensioner
o
Foot pedal control of spindle rotation
o
MCS4 Control with multi-media
o
Non-contact back angle sensing
Model 105P Production Medical Coil Winder

MCS4 Control with multi-media

Auto load of precut or spooled mandrel

Traverse length 48 to 144” (1200 to 3657mm)

Mandrel diameter - .001 to .250” (.025 to 6.35mm)

Wrap filament/wire - .001 to .025” (.025 to .635mm)

Accurate pitch calculation to .000001” (.0001mm)

Easily perform multiple pitch changes

Open, closed or variable pitch

Round or flat wrap wire

Programmable mandrel tension

Programmable wrap wire tension

Electronically synchronized spindle and tailstock

High resolution position feedback

Options:
o
Closed loop servo payoff tensioner
o
Fully automatic operation
o
Manual and Semi-Auto restart
o
Manual or air operated collets
o
Single-filar, Multi-filar
o
Single, double or triple spindles
o
Non-contact back angle sensing
Model 105L Laboratory Medical Coil Winder

MCS4 Control with multi-media

Traverse length 12 to 144” (300 to 3657mm)

Mandrel diameter - .001 to .250” (.025 to 6.35mm)

Wrap filament/wire - .001 to .025” (.025 to .635mm)

Accurate pitch calculation to .000001” (.0001mm)

Easily perform multiple pitch changes

Open, closed or variable pitch

Round or flat wrap wire

Programmable mandrel tension

Programmable wrap wire tension

Electronically synchronized spindle and tailstock

High resolution position feedback

Single spindle only

Options:
o
Closed loop servo payoff tensioner
o
Fully automatic operation
o
Manual and Semi-Auto restart
o
Manual or air operated collets
o
Single-filar, Multi-filar
o
Non-contact back angle sensing
Model 130 Continuous Coil Winder

MCS4 Control with multi-media

Fully automatic operation

Winds to length or until material run out

Core material - .001 to .250” (.025 to 6.35mm)

Wrap filament/wire .001 to .025” (.025 to .635mm)

Round or flat wrap wire

Servomotor pitch drive to 300 inch/minute

Servomotor driven spindle to 3000 RPM

Accurate pitch calculation to .000001” (.0001mm)

Easily perform multiple pitch changes

Product length readout

Options:
o
Closed loop servo payoff tensioner
o
In-line resistance measurement
o
Pretwist attachment
o
Finished product spooled or cut-to-length
o
Single-filar, Bi-filar, Tri-filar, Quad-filar
o
Take up spool layering attachment
o
Untwist attachment
o
Non-contact back angle sensing
398 Monaco Drive
Roselle, IL 60172-1954
Ph: (630)980-3200 Fax: (630)980-3249
email: [email protected] web: www.mcsinc.com
Specifications are subject to change without notice
Additional Options:

Additional I/O for customer options

Adhesive application and UV cure

Barcode scanner for data entry

Closed loop servo payoff tensioner

High speed spindle to 10,000 RPM

In-line hot air stress relieving / NiTi annealing

Laser ablation

Leveling casters

Light tower status indicator

Programmable air operated mandrel supports

Vision systems with optional measurement software

Wire straightener
02/12