HAkUFORM® L

Metalworking
COOLING LUBRICANTS
HAKUFORM® L
Sustainable – High-performance – Innovative
What is HAKUFORM® L?
HAKUFORM® L is made of non-water
miscible processing oils that contain base
fluids (GTL oils) obtained from natural gas
as a main element.
What makes
HAKUFORM® L distinctive?
Because of its main element, GTL oil,
HAKUFORM® L processing oils show extraordinarily low evaporation and low in oil mist
levels, and have a very high flash point.
Moreover, HAKUFORM® L oils contain
special additive combinations that result in
long tool life spans.
What does HAKUFORM® L
offer?
• Clear reduction in oil mist and oil vapor
load
• Reduced consumption volumes because of low losses from oil mist and
oil vapor
• "Safe product" due to high flash points
• Long tool life spans due to very high
performance capability
• Very good skin compatibility due to the
GTL oils being free of aromatic substances
• Reduction in the range of processing oils
currently being used because of the universal applicability of HAKUFORM® L oil
Which processing operations can be carried out
with HAKUFORM® L?
Machining with defined cuts:
•
•
•
•
Turning, milling, drilling, sawing
Deep drilling
Thread cutting and forming
Broaching
Machining with undefined cuts:
• Surface grinding, cylindrical grinding,
internal grinding, belt grinding
• Power honing
• Profile grinding and groove grinding
• Gear grinding
Which materials can be
processed using
HAKUFORM® L?
Where is HAKUFORM® L
already being successfully used?
•
•
•
•
•
•
• Automotive supply industry
• Tool manufacturing
• Steel industry
Cast materials
Steel and stainless steel
Aluminum alloys
Hard metals
Non-ferrous metals
Magnesium
All details are approximate values that follow the product
construction, the indicated purpose and the machine or system
technology.
Kluthe products are time-dependent and their technical values
differ depending on the type of chemical and thermal load,
and the mechanical and dynamic stress. These changes may
influence the product’s process functions.
We recommend an individual consultation and we will also be
happy to provide test samples upon request if possible.
Kluthe products are always being further developed. Therefore,
Chemische Werke Kluthe GmbH reserves the right to change
any technical data in this printed document at any time and
without notice.
Distributor, designer and copyright owner:
Chemische Werke Kluthe GmbH
Reproduction in full or in part is permitted with source indication
and with the sending of an exemplary copy.
Chemische Werke Kluthe GmbH
Gottlieb-Daimler-Str. 12
D-69115 Heidelberg
Court: Amtsgericht Heidelberg
Commercial register number: HRB 330556
Edition 01/2016
All the information in this printed document is based on our general technical experience and knowledge at the time of printing.
It is intended to give technically experienced readers and interested parties information about possible applications. However,
the individual pieces of information about the products are no
guarantee of their properties and do not assure the suitability of
the product for an individual case. They do not release the user
from the responsibility to test the suggested product before use.