PRINT THIS PAGE!

Transcription

PRINT THIS PAGE!

READING TIP
when browsing through
this catalogue it is easier
using two-up view
(viewing the left & right side next to each other)!
FOR BEST RESULTS
DO NOT
PRINT THIS PAGE!
This page will interfere with the
correct page order when printing
recto-verso.
The illustrations and photo’s in our catalogues and on our website are protected.
It is illegal to copy these in any way or by any means.
You are permitted to print the pages for personal use only.
Quality Parts & Service
JAGUAR MKII - DAIMLER
240 & 340 • 1959-’69 - V8 & V8 250 • 1962-’69
PARTS & ACCESSORIES CATALOGUE
Se
Q u a l i Q
i xc tohn d
E dEi d
t iiot ino n
• •
1 9109. 0
0 .5782 1
t yu aP lai rt yt s P&a r St se r &v i cS ee r v i c e
240 & 340 • 1959-’69 - V8 & V8 250 • 1962-’69
fill your customer number
in for easy ordering
www.angloparts.com
please visit our website for all contact information
Anglo Parts Shops
MAIN BRANCH BELGIUM
HOLLAND • ITALY • GERMANY
Authorized Anglo Parts Dealers
FRANCE • HOLLAND • SPAIN
SWEDEN • FINLAND
CZECH REPUBLIC • SLOVAKIA
LUXEMBOURG • POLAND • HUNGARY
All Rights reserved. No part of this publication may be reproduced or absorbed
in any catalogue or information system by any means, Mechanical, photographic,
electronic or otherwise, without prior express written consent of Anglo-Parts n.v.
S e c o n d E d i t i o n • 19 0 . 7 2 1
• Updated December 2007 • © Anglo Parts nv 2007
Important information
IMPORTANT POINTS
The general policies of our business are printed on the reverse side of our invoices and are on our web site. Updates are printed in the most recent catalogues and price lists and are
updated on the web site. When you order goods from us you agree with our policies and accept them. You are always free to ask for an updated publication. The most recent will succeed
all previous. Please read below, the most important points.
OUR SALESMEN
We are not trained automotive technicians and can not be held responsible for errors we say or write, we are enthusiasts who like to help. For technical information, we recommend you
use the books listed in this catalogue.
OUR CATALOGUES/WEBSITE
We have made every effort to make sure that the information in our catalogues and on our web site is correct. We can not be held liable or responsible if any mistake or inaccuracy exists in
specification, pricing or part number. We have the right to correct any error. The illustrations and photo’s in our catalogues and on our web site are only representations, products supplied
may vary from illustrations and photo’s, but will function the same way with similar quality.
OUR PART NUMBERS & PRICES
All parts ( or sets of parts ) have our own part number and refer to one item only. THE QUANTITY REQUIRED (“QTY”) stands for the quantity used for particular application. The quantity
you order can be different and should be marked when you order. Parts not available new, might be available in second hand condition. These second hand parts are not always listed
on the web site or in our price lists. Information will be sent to you on request. Prices shown on the web site and in the price lists are for one item and information only and are subject to
change without prior notice. Prices on the web site can be seen with or without VAT depending on your choice. Price lists supplied with the catalogues can exclude or include local VAT, this
is indicated on each price list. Part numbers are made from six figures. The first three figures will indicate the nature of the part. For example 161 stands for nuts, 162 for screws, 163 for
washers, etc. The condition of the part we sell is indicated on the web site and in the price list. The following codes will appear on the web site in the catalogue parts lists and on the price
lists supplied with catalogues, near the number, for the parts which are.. SH - Second Hand, EX - supplied on an EXCHANGE BASIS, and a SURCHARGE will be invoiced. NA - Currently
NOT AVAILABLE. LH - Left Hand or RH - Right Hand. Always viewed from the drivers seat. LHD - left Hand Drive, RHD Right Hand Drive, A/R - AS REQUESTED, means the quantity required
can vary from application to application. USE - the part number has been replaced by an other part number indicated.
ORDERS
Orders are welcome through the WEB SITE, E-MAIL, FAX, LETTER, TELEPHONE or by visiting a Anglo-Parts branch.
For orders not made through our Web site, can we please ask you to prepare the following, using our ORDER FORM.
- Your CUSTOMER NUMBER, name, address, telephone number work/home, fax number, codice fiscale (for Italian customers only) or VAT number for
European companies.
- Specify if shipping address is different.
- CAR TYPE INFORMATION, make, model, year build etc.
- Provide Anglo Parts PART NUMBERS only.
- Indicate the quantity desired and parts description.
- Indicate method of payment: VISA, MASTER CARD, EURO CARD or advance payment by bank.
- Once an order placed, we put this in the computer system and the processing of labels, lists and checking lists will follow. Changing an order already placed, will hold
up the whole system and automatically cause delays, we therefore ask for your help by checking your order twice prior to send it to us. This will help us deliver the parts in time. Thank you
for your understanding.
PAYMENTS
CREDIT CARDS: At this time of writing, we accept the following credit cards: VISA, MASTER CARD, EURO CARD. Please supply credit card number ( mostly 16 figures ), expiring
date and name as appears on the card.
BANK: When your merchandise is being picked, packed in boxes, weighed and sized, the invoice will be made and we inform you of the total amount to be paid, invoice
(Not for Web site) number and our bank references. Please note the invoice number and your customer number with any payment you do.
SHIPMENT
NATIONAL: We deliver door to door and goods including the transport costs must be paid at delivery C.O.D., if a credit card was not used.
INTERNATIONAL:We ship UPS prepaid, for small parcels. The only cost still to be paid at reception might be your local TAX. For large or heavy parcels we use an economical and
fast transport method. ANGLO PARTS packs its boxes very well and the risk of receiving damaged goods is very small, however the following must be noted.
Anglo Parts will not be held responsible for goods lost or damaged in transit. For shortage or damage claims not caused by the transporter, a claim must be made
within three days of receipt of the order. All packing materials should be retained. Transport of glass in not insurable and will be transported at your own risk.
RECEIVING YOUR GOODS
For all shipments, by arrival, please check that no seal or tape is broken and the package is not damaged. In case of any damage or shortage, write this on the carrier’s sheet in accordance
with the actual condition and quantity of contents BEFORE you sign the freight bill or receiving note. Keep your copy attached with the invoice and make a claim to the transport company
immediately. In any case, save the packing material until everything is settled. Anglo Parts checks goods while picking from stock and again while packing but the final check must be made
by the customer himself at arrival. Make sure that the parts received match the ones you ordered and that mechanical parts function correctly. Do not wait with checking the goods until you
actually need them and report problems within three days of receiving the goods.
WARRANTY
Almost all parts made for the classic car industry are made in small quantities by companies who are willing to do this at an acceptable price. We at Anglo Parts check the goods for
approval but we are not able to inspect each individual product. It is the responsibility of the user to make the final inspection of the part PRIOR TO fitting. Especially mechanical parts must
be checked to make sure they are in perfect working condition. The warranty period starts from the invoice date, not from the installation date. Our parts carry normal and reasonable
warranty but claims will be limited to the value of the component and in no case should cover labour, transport, failure of related component, failure resulting from faulty installation or parts
being used for rally or competition. All products for warranty claim must be returned to the shop where you bought it by using the following procedures: the value must be over 8 euro, the
goods must be sent back with shipping and taxes prepaid, all parts must be returned clean and well packed, once you or a third person has disassembled the part, our responsibility for it
has ended. Anglo Parts will make the final decision of whether the unit was inherently defective or damaged during installation. We shall investigate this offer when we have received the
goods back from you in undamaged condition. During the return these goods may not be damaged by poor packing or by transport. The warranty period for reconditioned parts is limited
to 6 months and 4 months for rebuilt shock absorbers, most other parts are warranted against defects in material and workmanship by the original equipment manufacturer or by Anglo
Parts nv for a period of one year starting with the date on the invoice.
RETURNS
If you received an incorrect item, and the mistake is yours, we are willing to restock this item and we will credit the value of the goods less a 15% restocking charge. No returns will be
accepted without your invoice copy, after 30 days from the invoice date, for bearings, pistons, piston rings, goods by meter, trim parts ( hoods, soft tops, tonneau covers, seat kits, panels
etc.) books or any parts where installation has been attempted. Goods must be returned transport and taxes prepaid. Anglo Parts is not able to refund the taxes paid in the country of
arrival, shipping or packing charges and commission we had to pay to the credit card company. You can use the value of this credit note again in a future order of the same value. We do
not refund the value of credit notes.
SURCHARGE - CORE DEPOSITS
A surcharge will be added on the price for parts offered on an exchange basis. The surcharge price can be seen on the web site in the catalogue parts lists and is listed in our price list near
the part number related and will be invoiced pending the return of the old reservicable unit. This surcharge will be refunded in full providing that we receive the unit complete, clean, drained
of oil and returned within two months of our invoice date. Please also provide a copy of our invoice. All returns must be sent back with full shipping charge prepaid. If you export the old
unit to us, a letter should be sent to us with your name, address, telephone number, date of sending and description of the goods you are returning, including the surcharge value. Please
make some copies and stick one on the parcel, one into the packing and keep one for yourself. We will need this information for importing the goods. Upon its arrival we will immediately
check the following points: is the packing well done and has there been any damage during the transport, is the old unit similar to the type of unit we have sent to you (correct original), is
the unit complete and are the essential parts rebuildable. Please do not send a MGA wiper motor for exchange with a TD wiper motor, do not send a distributor without the advance system.
In this latter sample we will refund the surcharge for the distributor less the value (in our opinion) of the advance system.
BACK ORDERS
Goods which are not in stock at the time of your order will be kept in back order. We will inform you when these are available again and parts will be reserved for you for a period of
fourteen days starting from the day you were informed. If you do not contact us within this period, we will put the part(s) back in our stock to be sold to other customers. By ordering you
can also specify “No Back orders” or ask us to cancel all previous back orders. When a part you had on back order becomes obsolete, we will let you know as well. If you decide to take
this part in used condition, please ask us and we will do our best to obtain it, if possible.
©
V a n
G e s t e l
B & C
2 0 0 5
1
Belangrijke informatie
BELANGRIJKE PUNTEN
De verkoopsvoorwaarden zijn op de achterzijde van de fakturen gedrukt en bevinden zich op onze web site. Aanpassingen worden in de recentste katalogus of prijslijst gezet en op onze
web site bijgewerkt. Als u bij ons bestelt, gaat u akkoord met onze verkoopsvoorwaarden (en aanvaardt u ze). U mag altijd een nieuwe publikatie aanvragen. De recentste publikatie zal
alle vorige vervolledigen en vervangen. Gelieve de belangrijkste punten hieronder vermeld te lezen.
ONZE VERKOPERS
We zijn geen getrainde technici en zijn niet aansprakelijk voor fouten die we zeggen of schrijven. We zijn autofanaten die u willen helpen. Voor technische uitleg bevelen we u de boeken
uit de lijst in de katalogus aan.
ONZE KATALOGI
Geen inspanning was ons te groot de juiste informatie in onze katalogi en op onze web site te zetten. We kunnen niet aansprakelijk gesteld worden voor fouten of onnauwkeurigheden
i.v.m. de specifiëring. de prijsbepaling of de onderdeelnummers. We hebben het recht een fout te verbeteren. De Illustraties en foto’s in onze katalogen en op onze web site zijn slechts
voorstellingen en er kunnen qua vorm kleine verschillen optreden, maar de geleverde produkten blijven qua kwaliteit en bestemming hetzelfde.
ONZE ONDERDEELNUMMERS EN PRIJZEN
Alle onderdelen (of sets van onderdelen) kregen van ons een stuknummer. De vereiste hoeveelheid (QT) staat voor de hoeveelheid voor afzonderlijk gebruik. De hoeveelheid die u vraagt
kan verschillen en moet naast elk nummer van het onderdeel. dat u bestelt, vermeld staan. Gelieve te verwijzen naar onze recentste prijslijsten om de leverbaarheid te garanderen. Onderdelen
die niet leverbaar zijn, kunnen soms tweedehands geleverd worden. Deze tweedehands onderdelen staan niet altijd in onze prijslijsten en op onze web site. De prijzen in onze prijslijsten
en op onze web site zijn prijzen per stuk en staan er alleen ter informatie. Ze kunnen plots veranderen naargelang de stijging of daling van de inkoopprijs. Ze kunnen zonder of met B.T.W.
vermeld staan. Dit is op elke prijslijst aangeduid. De stuknummers bestaan uit zes cijfers. De eerste drie cijfers geven de aard van het stuk aan. 161 staat bijvoorbeeld voor moeren, 162
voor schroeven, 163 voor platte rondellen. De staat van het onderdeel wordt in de prijslijst en op de web site vermeld of kan worden herkend aan het nummer. De volgende kodes zullen
in de prijslijst en op de web site naast het nummer voor stukken, die niet nieuw geleverd worden, staan: SH = tweedehands, EX = geleverd op ruilbasis en een supplement zal worden
aangerekend. NA = op het ogenblik niet beschikbaar. LH = links of RH = rechts. Bekeken vanuit de bestuurderszit. LHD = bestuurder aan linkerkant of RHD = bestuurder aan de rechterkant.
A/R = Zoals vereist. Dit betekent dat de vereiste hoeveelheid naargelang de toepassing kan verschillen. USE = het stuknummer wordt door het aangegeven nummer vervangen.
BESTELLINGEN
U kan altijd bestellen via onze web site, per e-mail, fax, brief, telefoon, of gewoon in de winkel. Voor bestellingen die niet langs onze web site gebeuren gelieve rekening
te houden met de volgende gegevens, wanneer u ons bestelformulier gebruikt:
- uw klantennummer, naam, adres, telefoonnummer werk/thuis, faxnummer, VAT(BTW)-nummer voor bedrijven;
- specifieer als het leveringsadres verschilt;
- informatie over de auto, merk, model, bouwjaar, enz.;
- gebruik zoveel mogelijk onze onderdeelnummers. Dit zal de behandeling van uw bestelling vergemakkelijken;
- geef het aantal stukken aan en beschrijf de onderdelen;
- duid de betaalwi jze aan: Bank (voorafbetaling), VISA, EUROCARD of MASTER CARD.
- Eens uw beselling geplaatst, zetten we deze in de computer. Automatisch volgen dan de etiketten, de picking lists en de checking lists. Als u een geplaatste bestelling wil
wijzigen, kan deze het hele systeem in de war sturen en, op die manier fouten of vertragingen veroorzaken. Daarom vragen we u de bestelling goed na te kijken,
vóór u ze plaatst. Dit zal ons helpen de onderdelen op tijd te leveren. We danken u voor uw begrip.
BETALINGEN
Kredietkaart: Op het tijdstip van publikatie aanvaarden we volgende kredietkaarten: VISA, EUROCARD, ACCES CARD, MASTERCARD.
Gelieve het rekeningnummer, de vervaldag (en kode indien aangegeven) en de kaarthoudersnaam te vermelden.
Bank: (Niet voor bestellingen via onze web site) Als de goederen bijeengebracht, ingepakt, gewogen en gemeten zijn, zal het faktuur opgesteld worden en zullen we het totale te betalen bedrag, het faktuurnummer en onze bankgegevens meedelen. Gelieve het faktuurnummer en het klantennummer op elke betaling te noteren. (De betaling dient te gebeuren zonder bankkosten voor de begunstigde.)
VERZENDING
We leveren bij u thuis, en de goederen, transportkosten inbegrepen, moeten bij levering C.O.D. betaald worden, als u geen kredietkaart gebruikt.
We verzenden via UPS (United Parcel Services) voor kleine pakken, waarbij de transportkosten voorafbetaald zijn. Bij ontvangst betaalt u nog alleen de TAX indien u in een niet EEG land woont. Voor grote en zware pakken gebruiken we een goedkope en snelle transportmethode. Anglo Parts pakt zijn goederen goed in en het risiko op beschadiging is zeer klein. Toch moet u met het volgende rekening houden. Anglo Parts kan niet aansprakelijk gesteld worden voor verloren of beschadigde goederen tijdens het transport. Klachten over verlies en schade, die niet door de vervoerder veroorzaakt werden, moeten binnen drie dagen na de ontvangst van
de bestelling ingediend worden. Al het verpakkingsmateriaal moet ter verifikatie bijgehouden worden. Het vervoer van glas is niet verzekerbaar en gebeurt op
risiko van de koper.
ONTVANGST VAN DE GOEDEREN
Gelieve bij de ontvangst van elke verzending na te kijken of zegels en plakbanden niet stuk zijn en het pak niet beschadigd is. In geval van beschadiging of verlies, schrijft u dit op de
vrachtbrief in overeenstemming met de aktuele toestand en hoeveelheid van de inhoud van uw verzending, voordat u het ontvangstbewijs tekent. Bewaar uw kopie bij het faktuur
en dien onmiddellijk bij de transportfirma een klacht in. Hou in elk geval de verpakking tot de zaak geregeld is. Bij Anglo Parts kontroleren twee personen de goederen, de eerste keer
tijdens het bijeenbrengen en de tweede keer bij het verpakken van de goederen om zeker geen fouten te maken. Uiteindelijk moet de klant zelf de allerlaatste kontrole bij
ontvangst uitvoeren. Vergewis er u van dat u alle gefaktureerde goederen ontvangen heeft en dat alle mechanische goederen werken. Wacht niet met de kontrole van de goederen tot
u ze werkelijk nodig heeft en meld problemen binnen drie dagen na ontvangst.
Nationaal: Internationaal:
DE WAARBORG
Bijna alle onderdelen voor klassieke wagens worden in kleine hoeveelheden gefabriceerd door bedrijven, die dit voor een aanvaardbare prijs doen. Anglo Parts probeert zoveel mogelijk
zelf de goederen na te kijken, maar we kunnen niet elk produkt kontroleren. Vóór de montage moet de gebruiker de Iaatste kontrole zelf uitvoeren. Vooral de mechanische
produkten moeten worden nagekeken om er zeker van te zijn dat ze in de beste staat verkeren. De garantieperiode begint vanaf de faktuurdatum, niet vanaf de datum van plaatsing.
De waarborg op onze onderdelen is normaal en redelijk, maar de klachten zijn beperkt tot de waarde van het komponent en dekt in geen geval: uurloon, transportkosten, fouten bij een
komponent dat eraan vastzit, fouten als gevolg van een slechte plaatsing of onderdelen die voor rally of kompetitie gebruikt worden. Bij klachten i.v.m. de waarborg moeten alle produkten
naar de winkel van aankoop teruggebracht worden. Daarbij moet u de volgende punten in acht nemen: -de waarde moet groter zijn dan 7,5 Euro -de verzendingskosten en taksen moeten
bij terug-zending van de goederen voorafbetaald zijn; -alle goederen moeten schoon en goed verpakt teruggestuurd worden. Zodra U of derden het onderdeel uit elkaar hebben gehaald,
zijn we niet meer aansprakelijk. Uiteindelijk beslist Anglo Parts zelf of het gaat over een intrinsiek defekt aan de eenheid, of het defekt bij plaatsing veroorzaakt werd. Goederen beschadigd
door slechte verpakking of transport tijdens de terugzending komen niet in aanmerking voor onderzoek.
TERUGZENDEN
Wanneer U een verkeerd onderdeel als gevolg van uw foute bestelling ontvangen hebt, zijn we bereid het terug te nemen tegen de waarde van het goed voor onderdelen met een waarde
van minimum 7,5 Euro. We rekenen u wel 15 % heropnamekosten aan. We aanvaarden geen terugzendingen: zonder een kopie van het faktuur, 30 dagen na de faktuurdatum, van lagers,
zuigers, zuigerringen, goederen per lopende meter, bekledingsonderdelen (linnen kappen, hoofdsteunen, dekzeilen, zetelovertrekken, panelen, enz.) of elk ander goed waarbij men met
de plaatsing wou beginnen. Bij terugzending moeten de taksen en transportkosten voorafbetaald zijn. Anglo Parts kan u, verpakkings-of verzendingskosten van het land van ontvangst en
de kommissie, die we aan de kredietkaarteninstelling moesten betalen, niet vergoeden. De uitbetalling geschied via een waardebon.
SUPPLEMENT
Een supplement komt bovenop de prijs voor onderdelen, die op ruilbasis worden aangeboden. Dit supplement staat in de prijslijst en op onze web site naast het betrokken onderdeelnummer
en zal gefaktureerd worden in afwachting van de terugzending van de oude, ingeruilde eenheid. Dit supplement wordt terugbetaald wanneer we de eenheid volledig, schoon, zonder olie
en twee maanden na de faktuurdatum terugkrijgen. Gelieve ook een kopie van ons faktuur toe te voegen. De verzendingskosten moeten volledig door u voorafbetaald worden. Indien u
ons de oude eenheid terugstuurt, vragen we u een brief te sturen met uw naam, adres, telefoonnummer, verzendingsdatum en beschrijving van de goederen, het supplement inbegrepen.
Gelieve enkele kopieën te maken waarvan één exemplaar op het pak te bevestigen, één in het pak te steken en één zelf te bewaren. We hebben ze nodig bij de invoer van de goederen.
Bij de aankomst van de goederen kijken we onmiddellijk de volgende punten na: - Is het stuk goed verpakt ? - Werd het tijdens het transport beschadigd ? - Komt de oude eenheid met
het type, dat we u zonden, overeen (het juiste origineel) ? - Is de eenheid volledig en zijn de essentiële onderdelen nog reviseerbaar ? Gelieve geen MGA ruitenwissermotor te sturen voor
ruil met een TD ruitenwissermotor of zend ons geen motor met een gebroken krukas. In dit laatste geval zullen we alleen de stukwaarde min de waarde (volgens onze beoordeling) van
de krukas terugbetalen.
BACK ORDERS
De goederen, die we op het tijdstip van uw bestelling niet in voorraad hebben, houden we in “back order”. We laten u dan weten wanneer we ze u opnieuw kunnen leveren. We reserveren
de onderdelen voor u voor een periode van veertien dagen (vanaf het ogenblik waarop we onze brief gepost hebben). Indien u ons binnen die periode niet gekontakteerd hebt zijn deze
onderdelen niet meer voor U gereserveerd. Als u bestelt, kan u altijd specifiëren “geen back orders” of ons vragen alle vorige te annuleren. Als een onderdeel in “back order” niet meer kan
worden geleverd, laten we u dit ook weten. Als u dan beslist dit onderdeel tweedehands te kopen, gelieve dit te vragen en we zullen al het mogelijke doen het onderdeel te vinden.
2
©
V a n
G e s t e l
B & C
2 0 0 5
Informations importantes
Les illustrations dans ce catalogue ne sont que des représentations. Les produits fournis peuvent être différents en ce qui concerne la forme, mais la qualité et le but restant pareils.
LES POINTS IMPORTANTS
Les conditions de vente sont imprimées au verso des factures et les modifications sont mentionnées dans la catalogue la plus récent et dans la liste de prix. Si vous commandez chez nous,
vous êtes d’accord avec nos conditions de vente (vous le acceptez). Vous pouvez toujours demandez une nouvelle publication. L’édition complètera et remplacera toutes les précédentes.
Vieillez lire les points les plus importants, mentionnés ci-dessous.
NOS VENDEURS
Nous ne sommes pas des techniciens bien expérimentés et nous ne somme pas responsable des erreurs que nous disons ou écrivons. Nous sommes des enthousiastes et voulons vous aider.
Pour une explication un peu plus technique, nous vous recommandons les livres de la liste de notre catalogue.
NOS CATALOGUES
Nous nous sommes efforcés à mettre dans notre catalogue des information correctes. Nous ne pouvons pas être rendu (civilment) responsables d’erreurs ou d’inexactitudes concernant la
spécification, l’estimation, ou les numéros de pièce. Nous avons le droit de corriger une faute.
NOS NUMEROS DE PIECE ET LES PRIX
Nous avons donné à chaque pièce (ou sets de pièces) un numéro. La quantité requise (QT) se réfère à la quantité pour un usage particulier. La quantité que vous demander peut être
différente et doit se trouver à côté de chaque numéro de pièce que vous commandez. Veuillez vous référer à nos listes de prix le plus révicentes pour garantir la disponibilité. Des pièces
non disponibles peuvent être fournies en occasion. Ces pièces en occasion ne se trouvent pas toujours dans nos listes. Les prix dans nos listes de prix sont des prix par pièce et s’y trouvent
seulement à titre informatif. Ils peuvent varier selon l’augmentation ou la baisse des prix d’achat. Ils peuvent être mentionnés sans ou avec la T.V.A. Ceci est indiqué dans la liste de prix.
Les numéros de pièce se composent de chiffres. Les trois premiers chiffres indiquent la nature de la pièce. 161 se réfère par example à écrous, 162 à boulons, 163 à rondelles plates.
L’état de la pièce est mentionné dans la liste de prix ou peut être reconnu au numéro. Les codes suivants se trouvent dans la liste à côté du numéro de pièces qui ne sont pas livrées comme
nouvelles. SH = en occasion, EX - fourni sur base d’échange et on vous comptera un supplément. NA - pas disponible en ce moment. LH - gauche ou RH - droite. Vu du point de vue du
siège du conducteur. LHD - le conducteur à gauche. RHD - le conducteur à droite. A/D - comme requis. Cela signifie que la quantité requise peut être différents selon l’application. USE - le
numéro de pièce a été remplacé par le numéro indiqué.
LES COMMANDES
Vous pouvez toujours commander par courrier, par téléphone, par téléfax, ou bien au magasin. Veuillez tenir compte des données suivantes si vous employez notre bon de commande:
- votre numéro de client, votre nom, votre adress, votre numéro de téléphone travail/privé, votre numéro de fax, le numéro de T.V.A. pour les entreprises;
- spécifiez si l’adress de livraison est différente;
- informations sur la voiture: la marque, le modèle, l’année de construction, etc.;
- utilisez autant que possible nos numéros de pièce. De cette manière, nous pouvons traiter vos commandes plus rapidement;
- donnez le nombre des pièces et décrivez les;
- indiquez le moyen de paiement: Banque, paiement à l’avance, VISA, EUROCARD, MASTER CARD. Une fois votre commande passée, nous l’introduisons dans l’ordinateur.
Les étiquettes, les “picking lists” et les “checking lists” suivent automatiquement. Si vous voulez modifier une commande passée, vous risquez de confondre tout le système et, de cette manière, causer des erreurs ou des retards. C’est pourquoi nous vous demandons de bien contrôler votre commande avant de la passer. Cela nous aidera à livrer les pièces à temps. Nous vous remercions pour votre aide.
La carte de crédit:
La Banque:
LES PAIEMENTS
Au moment de la publication, nous acceptons les cartes de crédits suivantes: VISA, ACCESSCARD, MASTERCARD. Veuillez mentionner le numéro de compte, l’échéance (et le code si indiqué) et le nom du titulaire de carte.
Si les produits ont été ramassés, emballés, pasés et mesurés, on rédigera la facture et nous communiquerons le montant total à payer, le numéro de la facture et nos données bancaires. Veuillez noter pour chaque paiement le numéro de client. (Le paiement doit arriver sans frais bancaires pour le bénéficiaire.)
National: International: L’EXPEDITION
nous livrons chez vous, et les produits, frais de transport inclus, doivent être payés COD à la livraison si vous n’utilisez pas de carte de crédit.
nous expédions par U.P.S. (United Parcel Services). Il faut payer d’avance les frais de transport pour les petits paquets. À la réception, vous ne payerez plus que la TAXE si vous n’habitez pas dans un pays de la CEE. Pour les paquets plus grands, nous utilisons une méthode plus rapide et moins chère. Anglo Parts emballe bien les produits et la risque d’endommager est très petit. Il faut cependant tenir compte de ce qui suit. Anglo Parts ne peut être rendue responsable produits endommagés ou perdus pendant le transport. Il faut introduire les plaintes de pertes ou dégats dans trois jours après la réception de la commande. Il faut garder le matériel d’emballage pour vérification. Nous n’assurons pas le transport de verre et le transport se passe au risque de l’acheteur.
LA RECEPTION DES PRODUITS
Veuillez contrôler à la réception de chaque envoi si les cachets et les scathes sont cassés si le paquet n’est pas endommagé. En cas de pertes ou dégâts, vous l’inscrivez sur la connaissement
en concordance avec l’état actuel et le quantité de votre envoi avant de signer le reçu. Gardez la copie avec la facture et introduisez immédiatement une plainte chez le transporteur.
Gardez en tout cas l’emballage jusqu’à ce que les problèmes soient résolus. Chez Anglo Parts, deux personnes vérifient les produits, d’abord au ramassage et ensuite à l’emballage des
produits pour éviter des erreurs. Finalement, le client même doit vérifier et dernier lieu les produits à la réception. Vérifiez si vous avez reçu tous les produits et si tous les
produits mécaniques fonctionnent. Ne reportez pas le contrôle jusqu’au moment où vous en avez besoin, et rapportez les produits dans trois jours après la réception.
LA GARANTIE
Presque toutes les pièces de voitures classiques sont fabriquées par des entreprises qui le font à un prix raisonable. Anglo Parts essaie, autant que possible, de contrôler elle-même les
produits, mais nous ne pouvons pas contrôler chaque produit. Avant le montage, le client doit effectuer lui-même le dernier contrôle. Il faut vérifier les produits mécaniques
pour être sûr qu’ils se trouvent en bon état. La période de garantie commence à partir de la date de la facture, et pas à partir de la date de l’installation. La garantie de nos pièces
est normale et raisonnable, mais les plaintes sont limitées à la valeur de l’élément et ne couvre en aucun cas le salaire à l’heure, le transport, les défauts d’un élément relatif, les défauts à la
suite d’une mauvaise installation ou les pièces qui sont utilisées pour les “rally” ou les competitions. En cas de plainte concernant la garantie, il faut rapporter tous les produits au magasin
d’achat en tenant compte des points suivants: - la valeur doit dépasser 7,5 Euro les frais d’expédition et les taxes doivent être payés d’avance au renvoi des produits; - il faut renvoyer les
produits propres et bien emballés. A partir du moment où une tierce personne a démonté les pièces, nous ne sommes plus responsables. Finalement, Anglo Parts décide elle-même s’il s’agit
d’un défaut inhérant à l’unité ou bien d’un défaut dû à l’installation. Les produits endommagés par un mauvais emballage ou un transport inadéquat pendant le renvoi ne seront pas pris
en considération de vérification.
LA REEXPEDITION
Si vous avez reçu une fausse pièce à la suite de votre commande incorrecte, nous sommes prêts à reprendre la pièce contre la valeur du produit, moins 15% des frais de reprise. Veuillez
noter que les pièces doivent avoir une valeur de minimum 7,5 Euro. Nous n’acceptons pas de réexpédition sans une copie de la facture, trente jours après la date de la facture, des produits
au mètre, des anneaux-pistons, des pièces de rechange de garniture intérieur (comme des capotes, des moquettes, des velours, des couvres toneau) ou de toute pièce dont l’installation a
déjà été commencée. A la réexpédition, tous les frais de transport et les taxes doivent être payés d’avance. Anglo Parts ne peut pas rembourser les frais d’emballage et d’expédition du
pays de réception, ainsi que la provision qu’elle a dû payer aux carte crédits. Nous vous remboursons ce montant avec un “Gift Certificate”.
LE SUPPLEMENT
Un supplément s’ajoute au prix pour les pièces qui seront offertes sur bases d’échange. Ce supplément se trouve dans la liste de prix à côté de numéro de pièce y relatif et sera facturé
en attente de renvoi de la vieille unité échangée. Ce supplément sera remboursé quant nous recevrons, deux mois après la date de la facture, l’unité entière, propre et sans huile. Veuillez
aussi y ajouter une copie de notre facture. Il faut que vous payiez les frais d’expédition d’avance. Si vous nous renvoyez la vieille unité, nous vous demandons d’envoyer une lettre avec
votre nom, votre adress, votre numéro de téléphone, la date d’expédition et la description du produit, le supplément inclus. Veuillez faire quelques copies, dont vous en attachez une au
paquet, dont vous en mettez un dans le paquet et dont vous en gardez une pour vous-même. Nous en avons besoin à l’importation des produits. A l’arivée des produits, nous vérifions les
points suivants: - la pièece, est-elle bien emballé? - A-t-elle été endommagée pendant le transport? - le vieille unité, correspond-t-elle au type nous vous avons envoyé (l’original)? - l’unité,
est-elle complète et les pièces essentielles sont-elles encore révisables? Veuillez ne pas envoyer de moteur d’essuie-glace au lieu d’un moteur Spitfire ou ne envoyez pas un moteur avec un
arbre-coude cassé. Dans ce dernier cas, nous ne rembourserons que la valeur de la pièce moins le valeur de l’arbre-coude (selon notre estimation).
LES “BACK ORDERS”
Les produits que nous n’avons pas en stock au moment de votre commande sont gardés en “back order”. Nous vous laissons savoir quand nous pouvons à nouveau vous les livrer. Nous
vous réservons les pièces pendant une période de 15 jours (à partir du moment où nous avons posté notre lettre). Si vous nous contactez pas pendant cette période, les pièces ne vous sont
plus réservées. Si vous commandez, vous pouvez toujours spécifier “pas de back orders”, ou bien nous demander d’annuler tous les “back orders” précédents. Si nous ne pouvons plus
livrer une pièce en “back order”, nous vous le laissons savoir. Si vous décidez d’acheter cette pièce en occasion, veuillez le demander et nous ferons notre possible pour la trouver.
©
V a n
G e s t e l
B & C
2 0 0 5
3
Wichtige Auskünfte
1. EINFÜHRUNG
Die Abbildungen in diesem Katalog oder auf unserer Webseite sind nicht exakt oder maßstabsgerecht. Die tatsächlichen Teile können geringfügig von den Abbildungen abweichen, die
Qualität und die Verwendbarkeit werden jedoch nicht beeinträchtigt. Die Rover-Gruppe liefert keine Ersatzteile mehr, daher übernimmt ANGLO-PARTS diese Dienstleistung, indem weltweit
Rover-Ersatzteile von ANGLO-PARTS eingeführt, neu hergestellt und ausgeliefert werden. Wir benutzen dazu Original “blue prints” und Original-Musterbauteile, um einen erschwinglichen
Preis zu garantieren. Die Musterteile werden außerdem noch von anderen Originalherstellern wie z. B. Lucas, Lockheed, Armstrong, Vandervell, Glacier, Borg & Beck etc. hergestellt. Wenn
Originalteile dieser Hersteller verfügbar sind, wird ANGLO-PARTS Ihnen diese Teile liefern, auch wenn sie etwas teurer sind. Wir sind der Meinung, dass Qualität und Authentizität an erster
Stelle stehen sollten.
2. ALLGEMEINE GESCHÄFTSBEDINGUNGEN
Wir verkaufen und liefern ausschließlich auf der Basis unserer Allgemeinen Verkaufs- und Lieferbedingungen, die auf der Rückseite der Bestellformulare und Rechnungen abgedruckt sind.
Sie finden diese Allgemeinen Geschäftsbedingungen auch in diesem Katalog. Wenn Sie bei uns bestellen, sind Sie mit unseren Verkaufsbedingungen einverstanden und akzeptieren diese.
Die Firma ANGLO-PARTS behält sich vor, die Allgemeinen Geschäftsbedingungen von Zeit zu Zeit neuen Gegebenheiten anzupassen, und die jeweils letzte Fassung findet Anwendung auf
die Verträge.
3. TECHNIK
Für technische Erläuterungen empfehlen wir Ihnen die Handbücher im Inhaltsverzeichnis des Kataloges. Wir übernehmen keine Gewähr für technische Informationen in unseren Katalogen,
diese dienen lediglich der Darstellung unserer Waren.
4. KATALOG
Wir haben uns bemüht, unsere Kataloge so sorgfältig wie möglich zu erstellen. Wir übernehmen keine Verantwortung für Fehler oder Ungenauigkeiten im Zusammenhang mit der
Spezifizierung, der Preisbestimmung oder den Ersatzteilnummern. Wir behalten uns das Recht vor, aufgetretene Fehler ohne Rechtsnachteile für uns zu verbessern. Gewährleistungsansprüche
entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder
nachlässige Behandlung und natürlichen Verschleiß des Liefergegenstandes sowie Schäden aus sportlichen Einsätzen. Zugesicherte Eigenschaften müssen ausdrücklich schriftlich im Einzelnen
als solche bezeichnet werden.
5. ERSATZTEILNUMMERN UND PREISE
Alle Ersatzteile oder Gruppen von Ersatzteilen haben von uns eine Ersatzteilnummer erhalten. Die Abkürzung QTY steht für die für einen bestimmten Einsatz erforderliche Menge des
jeweiligen Ersatzteiles. Die von Ihnen bestellte Liefermenge kann davon abweichen und sollte deutlich neben der jeweiligen Ersatzteilnummer angegeben werden. Bitte verwenden Sie
die jeweils neueste Preisliste, um die Lieferbarkeit zu gewährleisten. Ersatzteile, die nicht lieferbar sind, können wir manchmal aus zweiter Hand besorgen. Diese Gebraucht-Ersatzteile
stehen nicht immer in unserer Preislisten. Die Preise in unserer Preisliste sind Stückpreise, sie können sich infolge einer Veränderung der Einkaufspreise ebenfalls ändern. Die Listenpreise
beinhalten, falls nicht anders bezeichnet, die jeweilige gesetzliche Mehrwertsteuer. Die Ersatzteil-Nummern bestehen aus sechs Ziffern. Die ersten drei Ziffern geben die Art des Ersatzteils
an: 161 z. B. steht für Muttern, 162 für Schrauben und 163 für Scheiben. Der Zustand des Ersatzteiles wird in der Preisliste erwähnt oder kann anhand der Nummer erkannt werden. Die
folgenden Codes stehen in der Preisliste neben der Ersatzteilnummer, falls dieses Teil nicht neu geliefert werden kann: SH bedeutet aus zweiter Hand, EX wird auf Tauschbasis geliefert,
und ein Mehrpreis (Surcharge/Surch) wird berechnet, NA bedeutet im Augenblick nicht erhältlich. LH bedeutet links, RH rechts - jeweils vom Fahrer aus gesehen. LHD bedeutet Fahrer auf
der linken Seite und RHD Fahrer auf der rechten Seite. A/R bedeutet “wie erforderlich”, das heißt, dass die erforderliche Menge nach dem Zweck unterschiedlich sein kann. Durch die
Abkürzung USE wird eine neue Ersatzteilnummer bezeichnet, welche die ursprüngliche Nummer ersetzt.
6. AUFTRAGSERTEILUNG
Sie können per Fax, Brief, telefonisch oder wie gewohnt im Shop bestellen. Bei Verwendung unseres Bestellformulars möchten wir Sie bitten, dieses vollständig auszufüllen: Ihre KundenNummer, Adresse, Telefon- und Faxnummer, Umsatzsteuer-ID-Nummer (gewerblich).
- Spezifizieren Sie die Lieferadresse, falls diese von der Rechnungsanschrift abweicht.
- Geben Sie uns die vollständigen Angaben zu Ihrem Fahrzeug wie Marke, Typ, Baujahr usw.
- Benutzen Sie ausschließlich unsere Ersatzteilnummern, dadurch kann Ihre Bestellung schneller bearbeitet werden.
- Geben Sie die gewünschte Menge der Ersatzteile unter Verwendung der Beschreibung im Katalog an.
- Geben Sie die Art der Zahlungsweise an.
- Sobald wir Ihren Auftrag erhalten haben, wird dieser elektronisch weiterverarbeitet, automatisch werden dann daraus die Bestellungen, Lieferscheine und Rechnungen erstellt. Wenn Sie einen einmal gegebenen Auftrag ändern möchten, kann dies zu Fehlern oder Verspätungen führen. Deshalb möchten wir Sie bitten, den Auftrag vor Erteilung genauestens zu überprüfen. Dies hilft uns, die Ersatzteile pünktlich zu liefern. Vielen Dank für Ihr Verständnis.
7. ZAHLUNGSWEISE
Sobald die Bestellung konfektioniert, verpackt, gewogen und gemessen wurde, wird die Rechnung erstellt, und wir werden Ihnen den vollständigen Rechnungsbetrag, die Rechnungsnummer
und unsere Bankverbindung mitteilen. Bitte geben Sie bei jeder Zahlung die Rechnungsnummer und Ihre Kundennummer an. Kreditkarten: Zum Zeitpunkt der Drucklegung dieser Allgemeinen
Informationen akzeptieren wir folgende Kreditkarten: Visa, Eurocard, Accesscard, Mastercard. Bitte geben Sie bei Kreditkartenzahlung die Kartennummer, das Verfalldatum (und die
Prüfnummer, wenn angegeben) sowie den Namen des Karteninhabers an. Eine Zahlung per Nachnahme ist nur im Inland möglich.
8. VERSENDUNG
Da der Versand unserer Waren auf Gefahr und Kosten des Bestellers erfolgt, bitten wir Sie, in der Bestellung zu spezifizieren, ob Sie die Waren abholen oder einen Dritten mit der Lieferung
beauftragen. ANGLO-PARTS wird die bestellten Waren ausreichend verpacken, um das Risiko von Transportbeschädigungen zu reduzieren. ANGLO-PARTS ist nicht verantwortlich für Ware,
die beim Transport verlorengegangen oder beschädigt wurde. ANGLO-PARTS übernimmt keine Haftung für den Frachtführer, der im Auftrag des Bestellers tätig wird. Wir empfehlen daher
bei Erhalt der Ware: Überprüfen Sie bitte bei Lieferung der Ware, ob die Verpackung, eventuelle Siegel oder Klebestreifen aufgebrochen wurden und ob die Verpackung beschädigt ist. Für
den Fall einer Beschädigung oder das Fehlen von Teilen machen Sie bitte eine entsprechende Notiz auf den Frachtbrief hinsichtlich des Zustandes und des Inhaltes Ihrer Sendung, bevor Sie
den Erhalt quittieren. Behalten Sie Ihre Kopie der Rechnung und setzen Sie sich sofort mit Ihrem Frachtführer in Verbindung. Bewahren Sie die Verpackung auf, bis die Fragen geklärt wurden.
Wir überprüfen zweimal die Vollständigkeit der Bestellung, das erste Mal beim Konfektionieren und das zweite Mal beim Verpacken der Waren. Daneben sind Sie allerdings verpflichtet, die
letzte Kontrolle durchzuführen. Wir verweisen auf die Fristen in unseren Allgemeinen Verkaufs- und Lieferbedingungen.
9. RÜCKSENDUNGEN
Wenn Sie ein Ersatzteil erhalten, für dieses aber keine Verwendung haben und Sie diese Falschbestellung zu vertreten haben, sind wir bereit, diesen Artikel zurückzunehmen. Rücksendungen
erfolgen auf Kosten und Gefahr des Bestellers. Wir werden Ihnen den Rechnungsbetrag der Waren abzüglich einer Wiedereinlagerungsgebühr von 15 % erstatten. Wir akzeptieren keine
Rücksendung ohne eine Durchschrift unserer Rechnung. Nach Ablauf von mehr als 30 Tagen nach dem Rechnungsdatum akzeptieren wir keine Rücksendung. Lager, Kolben, Kolbenringe,
Meterware und Verkleidungsteile (Kopfstützen, Verdecke, Verdeckabdeckungen, Sitzbezüge, Türverkleidungen) sind vom Umtausch ausgeschlossen. Dies gilt auch für Ersatzteile, mit
denen ein Installationsversuch unternommen wurde. Wir erstatten keinerlei Verpackungs- und Versandkosten sowie Servicegebühren, die wir an Kreditkartenfirmen bezahlt haben. Die
Rückzahlung erfolgt über einen Warengutschein in Höhe des Rückzahlungsbetrages.
10. LIEFERUNG VON ERSATZTEILEN AUF AUSTAUSCHBASIS
Für Ersatzteile, die von uns auf Austauschbasis angeboten werden, berechnen wir einen Mehrkostenpreis. Dieser Mehrkostenpreis ist in unserem Preisverzeichnis neben der betreffenden
Ersatzteilnummer angegeben. Bei Bestellung eines Ersatzteiles auf Austauschbasis wird neben dem Preis für das Ersatzteil auch der Mehrkostenpreis in Rechnung gestellt. Dieser Mehrkostenpreis
wird ganz oder teilweise zurückerstattet, vorausgesetzt wir erhalten vom Besteller das entsprechende Austauschteil komplett, sauber und ölfrei und innerhalb von zwei Monaten nach unserem
Rechnungsdatum. Bitte senden Sie eine Kopie unserer Rechnung mit. Die Versendung des Austauschteiles erfolgt auf Gefahr und Kosten des Bestellers. Wenn Sie uns das Austauschteil aus
dem Ausland schicken, sollten Sie uns einen Brief beilegen, der Ihren Namen, Anschrift, Telefonnummer und das Versendungsdatum sowie eine Beschreibung der Güter beinhaltet und den
Mehrkostenbetrag. Bitte fertigen Sie von diesem Brief einige Kopien an, fügen eine dem Paket bei, kleben eine auf das Paket und behalten eine weitere für Ihre eigenen Unterlagen. Wir benötigen
diese Informationen für die Einfuhrabfertigung. Bei Eingang der Ware überprüfen wir sofort die folgenden Punkte: War das Teil ausreichend verpackt oder sind Transportbeschädigungen
aufgetreten? (Wenn ja, werden wir Sie sofort davon in Kenntnis setzen). Entspricht das Altteil dem von uns gelieferten Teil? Ist das Altteil vollständig, und sind die wichtigsten Ersatzteile noch
wiederherstellbar? Bitte beachten Sie, dass wir im Falle der Übersendung eines Falschteiles oder eines beschädigten Teiles nur den jeweiligen Stückwert des zurückgesandten Teiles erstatten.
Insoweit führen wir eine Schätzung durch.
11. NACHLIEFERUNGEN
Waren, die zum Zeitpunkt Ihres Auftrages nicht vorrätig sind, werden als Nachlieferung (Backorder) behandelt. Wir werden Sie sofort über die Verfügbarkeit der Teile informieren. Das
Ersatzteil ist mit einer Frist von 14 Tagen nach Absendung unserer Benachrichtigung für Sie reserviert. Sollten Sie diese Frist verstreichen lassen, verfällt die Nachlieferung. Wenn Sie keine
Nachlieferung erhalten möchten, können Sie bei Auftragserteilung auch ”keine Nachlieferungen” vermerken. Nachlieferungen können zu jeder Zeit annulliert werden. Wenn das Ersatzteil
nicht mehr lieferbar ist, werden wir Sie sofort davon in Kenntnis setzen. Sie können dann entscheiden, ob Sie das Ersatzteil aus zweiter Hand kaufen wollen. Sobald uns ein entsprechender
Auftrag vorliegt, werden wir uns bemühen, dieses Ersatzteil für Sie zu besorgen.
4
©
V a n
G e s t e l
B & C
2 0 0 5
Allgemeine Verkaufs- und Lieferbedingungen
Allgemeine Verkaufs- und Lieferbedingungen der ANGLO-PARTS Autoteile GmbH~ Wetzlar
1.
Lieferungen durch uns erfolgen ausschließlich unter Zugrundelegung unserer nachfolgenden Verkaufs- und Lieferbedingungen. Bestellungen nehmen wir ausschließich
zu diesen Bedingungen an. Änderungen und Ergänzungen bedürfen der Schriftform. Andere Allgemeine Geschäftsbedingungen gelten auch dann nicht, wenn ihnen im
Einzelfall nicht ausdrücklich widersprochen wurde.
2. Wird eine Bestellung schriftl., mündlich oder auf andere weise getätigt, bleibt dem Besteller eine Frist von 7 Werktagen, um diese Bestellung zu wiederrrufen, sofern
noch keine Lieferung erfolgt ist. Nach Ablauf der 7-Tage Frist hat Anglo-Parts das Recht 30% des Bestellwertes dem Kunden zu berechnen oder 30% vom Wert eines
Vertrages zu berechnen. Der Kunde hat außerdem innerhalb einer Frist von 7 Werktagen, nach Erhalt der Ware, die möglichkeit die erhaltene Ware an Anglo-Parts
zurückzugeben (gemäß Punkt 9 “WICHTIGE AUSKÜNFTE”).
Der Versand unserer Ware erfolgt auf Gefahr und auf Kosten des Bestellers. Die tatsächliche Höhe der der Transport- und Verpackungskosten können nur berechnet
werden, nach der Zusammenstellung und Verpackung der Warensendung. (da Größen- und Gewichtsabhängig.)
3. Sofern der Versand nicht gegen Nachnahme erfolgt, sind Zahlungen rein netto innerhalb von 10 Tagen nach Rechnungserhalt zu leisten. Im Verzugsfall hat
der Besteller Verzugszinsen in Höhe von 3 % über dem jeweils geltenden Diskontsatz der Deutschen Bundesbank zu bezahlen. Die Geltendmachung eines weiteren
Verzugsschadens bleibt vorbehalten.
4. Der Besteller ist - sofern er Kaufmann ist - verpflichtet, unsere Ware unmittelbar nach Erhalt auf Mängel zu untersuchen und eventuelle Mängel unverzüglich,
spätestens innerhalb von 8 Tagen nach Erhalt der Ware - bei zunächst nicht erkennbaren Mängeln innerhalb von 8 Tagen nach deren Bekanntwerden - per Einschreiben
bei uns geltend zu machen. Bei offensichtlichen Mängeln trifft die vorgenannte Verpflichtung auch Nichtkaufleute. Werden berechtigte Mängel gerügt, sind wir
lediglich zur Nachbesserung bzw. zur Ersatzlieferung verpf!ichtet, allerdings erst, nachdem uns die von uns gelieferte Ware zur Verfügung gestellt worden ist. Wir
behalten uns die Überprüfung etwa gerügter Mängel durch den jeweiligen Hersteller vor und sind nicht zu Nachbesserungen oder Ersatzlieferungen verpflichtet, bevor
dessen Prüfungsergebnis vorliegt. Nach endgültig fehlgeschlagener Nachbesserung bzw. Ersatzlieferung ist der Besteller zur Wandelung oder Minderung berechtigt.
Gewährleistungsansprüche entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder
unsachgemäße Verwendung, fehlerhafte oder nachlässige Behandlung und natürlichen Verschleiß sowie vom Besteller oder Dritten vorgenommenen Eingriffen in den
Liefergegenstand sowie Schäden aus sportlichen Einsätzen.
5. Schadenersatzanspruche des Bestellers - aus welchem Rechtsgrund auch immer - insbesondere der Ersatz für verspätete Auslieferung und mittelbare Schäden sind
ausgeschlossen. Dies gilt nicht, soweit uns Vorsatz oder grobe Fahrlässigkeit zur Last fällt.
6. Wir behalten uns das Eigentum an sämtlichen von uns gelieferten Waren bis zur restlosen Bezahlung sämtlicher Forderungen aus unserer Geschäftsbeziehung mit
dem Besteller vor. Veräußert der Besteller die gelieferte Ware weiter, so tritt er hiermit schon jetzt die ihm aus der Veraußerung entstehenden Forderungen gegen seinen
Abnehmer in voller Höhe an uns ab. Übersteigt der Wert unserer Sicherheiten gegen den Besteller (etwaige Eigentumsvorbehalte zuzüglich etwaiger Forderungsabtretungen)
unsere Forderung gegen den Besteller, so werden wir auf dessen Verlangen die Sicherheiten, die unsere Forderung übersteigen, freigeben.
7. Bei vom Besteller zu vertretender Falschbestellung ist ANGLO-PARTS bereit, unbeschädigte Artikel zurückzunehmen. Die Rücksendung erfolgt unter Beifügung
einer Rechnungskopie auf Kosten und Gefahr des Bestellers. Eine Rücksendung ist nicht mehr möglich 30 Tage nach dem Rechnungsdatum. Bei Ersatzteilen mit denen
ein Einbauversuch unternommen wurde, ist eine Rücksendung ebenfalls ausgeschlossen. ANGLO-PARTS erstattet den Rechnungsbetrag der zurückgesandten Ersatzteile
abzüglich einer Wiedereinlagerungsgebuhr von 15 % des Rechnungsbetrages.
8. Für Ersatzteile die auf Austauschbasis angeboten werden, wird der in der Preisliste neben dem Ersatzteilpreis angegebene Mehrkostenpreis berechnet. Dieser
Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt der Besteller übersendet auf eigene Kosten und Risiko unter Beifügung einer Rechnungskopie das
entsprechende alte Bauteil komplett, sauber und ölfrei innerhalb von zwei Monaten nach Rechnungsdatum. Bei Rücksendungen aus dem Ausland muß der Besteller eine
Bestätigung beifügen, aus der sein Name, Anschrift das Versendungsdatum sowie eine Beschreibung der Güter hervorgeht. Bei der Rücksendung eines falschen Bauteils
wird nur der jeweilige Stückwert erstattet. Insoweit führt ANGLO-PARTS eine Schätzung durch.
9. Ersatzteile die bei Erteilung des Auftrages nicht lieferbar sind, werden, wenn keine anderslautende Anweisung des Bestellers vorliegt, als Backorder behandelt. Bei
Eintritt der Lieferfähigkeit wird der Besteller in Kenntnis gesetzt. Die entsprechenden Ersatzteile werden für einen Zeitraum von 14 Tagen nach Absendung der Bestätigung
für den Besteller reserviert. Backorders können jederzeit vom Besteller annulliert werden.
10. Als Erfüllungsort fur die Lieferung und Zahlung sowie als Gerichtsstand gilt - sofern der Besteller Kaufmann ist - Wetzlar als vereinbart Darüberhinaus gilt ausschließlich
das Recht der Bundesrepublik Deutschland. Das Übereinkommen der Vereinten Nationen vom 11.04.1980 uber Verträge über den internationalen Warenkauf findet keine
Anwendung.
11
Sollte eine Bestimmung dieser Bedingungen und der von uns mit dem Besteller getroffenen weiteren Vereinbarungen unwirksam sein oder werden, so wird dadurch
die Gültigkeit des Vertrages im übrigen nicht berührt. Die Vertragspartner sind verpflichtet, die unwirksame Bestimmung durch eine solche zu ersetzen, mit der der
wirtschaftliche Erfolg der unwirksamen Bestimmung möglichst erreicht wird. Sollten sich aus diesen Allgemeine Verkaufs- und Lieferbedingungen und den Allgemeinen
Informationen Wiedersprüche ergeben, genießen diese Allgemeine Verkaufs und Lieferbedingungen Vorrang.
12. Hinweis gemäß § 33 BDSG: Name und Anschrift des Auftraggebers sowie alle für die Auftragsabwicklung erfoderlichen persönlichen Daten werden ausschließlich
für eigenen geschäftlichen Zwecke in automatisierten Dateien gespeichert und Dritten nicht zugänglich gemacht.
©
V a n
G e s t e l
B & C
2 0 0 5
5
Informazioni importante
INFORMAZIONI IMPORTANTI
Le condizioni di vendita sono stampate sul retro delle fatture, all’interno dei cataloghi e nei listini prezzi. Se si ordina da noi, il cliente accetta e condivide le nostre condizioni di
vendita. Prima di effettuare un ordine siete pregati di leggere attentamente i punti seguenti.
I NOSTRI VENDITORI
Non sono dei tecnici perciò non sono responsabili di eventuali errori, si consiglia sempre il consulto di un meccanico esperto, se si hanno delle difficoltà, oppure consultare i libri
tecnici presenti nei nostri cataloghi. I nostri venditori sono comunque entusiasti di poterla aiutare in ogni modo possibile.
I CATALOGHI
Ci impegniamo da sempre affinché le informazioni presenti all’interno dei nostri cataloghi siano il più possibile corrette; quindi, non siamo responsabili di eventuali imprecisazioni o
mancanze sulla descrizione, sul prezzo o sui numeri di codice dei ricambi. Per questo ci riserviamo il diritto di apportare le correzioni necessarie senza preavviso.
Le illustrazioni degli articoli sono solo indicative, perciò, possono esserci delle piccole differenze per quanto riguarda la forma, ma la qualità e l’utilizzo restano le medesime.
La quantità (QT) scritta affianco al codice articolo si riferisce alla quantità necessaria al restauro di una singola auto; tutti i prezzi si riferiscono alla quantità singola, perciò sono da
moltiplicare sempre per la quantità scritta accanto all’articolo; è comunque possibile ordinare la quantità desiderata.
I ricambi che non sono disponibili, non sono presenti nei listini prezzi oppure sono marcati NA. Talvolta è comunque possibile trovarli di seconda mano. I prezzi dei nostri ricambi
possono cambiare improvvisamente e senza preavviso, dipende dei prezzi di acquisto presso i nostri fornitori. I nostri listini sono I.V.A. compresa.
Normalmente tutti i codici si riferiscono all’articolo NUOVO. Talvolta sono presenti delle eccezioni, come:
SH: ricambio d’occasione/seconda mano. EX: si tratta di materiale revisionato, per il quale serve il reso del vecchio, altrimenti si deve pagare un sovrapprezzo. NA: Non disponibile.
LH: sinistro. RH: destro ( visti dal punto di vista del guidatore). LHD: guida a sinistra. RHD: guida a destra.- A/R: a richiesta (la quantità può variare a seconda dell’applicazione).
USE: il numero di articolo è stato sostituito dal numero indicato.
ORDINI
Accettiamo ordini via fax, telefono, e-mail, a mezzo posta, internet oppure in negozio; nel caso utilizzate il nostro modulo d’ordine, tenete presente quanto segue:
- indicare sempre il vostro codice Cliente (solo se siete già clienti), il nome, l’indirizzo, il numero di telefono, il codice fiscale o il numero di partita I.V.A. per le Ditte;
- specificare l’indirizzo per la consegna nel caso fosse diverso da quello di fatturazione;
- completare i dati identificativi della vostra vettura: marca, tipo, anno di costruzione, ecc.
- usare soprattutto i nostri codici articolo; ciò rende più facile e sicura l’evasione del vostro ordine.
- indicare sempre la quantità a voi necessaria e scrivete la descrizione dei ricambi.
- indicare la modalità di pagamento; se prevedete l’uso di carta VISA, MASTERCARD, inserite il codice completo (16 cifre), la scadenza e il badge code. Tutti questi dati sensibili vengono inseriti nel nostro sistema computerizzato per la corretta evasione dell’ordine; modificare un ordine già inviato provoca grave disordine nei nostri sistemi causando la possibilità di sbagliare e ritardare l’evasione dell’ordine stesso. Perciò vi chiediamo di controllare bene tutti i dati prima di trasmetterli: ci aiuterà a fornirvi i ricambi nei modi e nei tempi corretti. Certi della vostra collaborazione vi ringraziamo.
PAGAMENTI
Carta di credito: al momento, accettiamo esclusivamente carta di credito del circuito VISA, MASTERCARD. Siete pregati di indicare correttamente il numero di 16 cifre,
la scadenza, il badge code ed il nome del “titolare” della carta.
Bonifico Bancario: Vi invieremo, via fax o via mail, la copia della fattura, quindi provvederete a fare il bonifico immediatamente inviandoci copia dello stesso,
sarà nostra premura spedire il materiale non appena arrivato il pagamento.
Contrassegno: Pagamento in CONTANTI o assegno circolare al corriere. Solo su nostra autorizzazione potete lasciare un assegno bancario.
SPEDIZIONE
Effettuiamo solo spedizioni Nazionali, utilizzando il corriere espresso. La consegna viene effettuata in 24h/48h. I costi del trasporto e dell’imballaggio vengono conteggiati in fattura,
essi variano in base al volume del pacco. Il contrassegno prevede un costo aggiuntivo per i diritti d’incasso del corriere. Cerchiamo di imballare il materiale nel modo migliore al fine
di evitare rotture o danni: tuttavia, nel caso dovesse succedere, Anglo Parts SRL non si ritiene responsabile di spedizioni danneggiate o perse durante il trasporto. Il cliente dovrà dare
comunicazione scritta entro tre giorni dal ricevimento della merce. Nel caso di problemi, tutto il materiale di imballaggio deve essere conservato per l’eventuale verifica. Il materiale
fragile (parabrezza,parti in vetro,etc) viene da noi assicurato.
RICEVIMENTO DELLA MERCE
Siete pregati di verificare, al ricevimento della merce, che i sigilli, il nastro adesivo e la confezione non siano rotti o manomessi. In caso di danneggiamento o perdita del materiale:
firmate con riserva al corriere, conservate la copia del documento di trasporto/fattura, presentate immediatamente un reclamo al trasportatore e metteteci a conoscenza dell’accaduto.
Conservate in ogni caso l’imballo finché i problemi non saranno stati risolti. Verificate immediatamente se avete ricevuto tutto il materiale ordinato e se tutti i pezzi
meccanici funzionano. Non aspettate di verificare i pezzi al momento del montaggio e, in caso di difetti o errori, scriveteci entro tre giorni dal ricevimento della merce.
GARANZIA
Anglo Parts si impegna a comprare solo dai fornitori migliori, controllando nel limite del possibile tutti i ricambi, ma talvolta vi consigliamo di fare un ultimo controllo prima
del montaggio. Soprattutto bisogna verificare che i pezzi meccanici siano in perfetto stato. Il periodo di garanzia inizia dalla data di fatturazione e non dalla data del
montaggio. I nostri ricambi hanno una garanzia limitata al valore del pezzo, quindi eventuali reclami comportano solo la sostituzione del pezzo difettoso o la restituzione del solo
valore dell’articolo. La Garanzia non copre i costi del montaggio, del trasporto, di danni conseguenti al difetto del pezzo, di un montaggio scorretto e di pezzi che vengono usati
per competizioni o rally. Nel caso di reclami coperti da garanzia, i pezzi devono essere restituiti al negozio; a tal proposito tenete presente che: il valore deve essere maggiore di
7,5 Euro, tutti i pezzi devono essere rispediti puliti e ben imballati. Una volta ricevuti i pezzi Anglo Parts SRL verifica se si tratta di un difetto di fabbrica oppure se è dovuto ad un
montaggio scorretto. I pezzi danneggiati dal trasporto o nell’imballo non vengono presi in considerazione.
RISPEDIZIONE
Accettiamo resi di materiale, solo se autorizzati, entro e non oltre 10 giorni dal ricevimento della merce. Se la restituzione è dovuta ad un errore di ordinazione da parte vostra, viene
detratto dal costo dell’articolo il 15%, quale copertura di costi generali (valore minimo articolo 7,5Euro).
Non vengono accettati resi di materiale che siano stati anche parzialmente montati! I costi del trasporto e dell’imballaggio non vengono MAI restituiti.
SUPPLEMENTO
Alcuni ricambi vengono forniti rigenerati (rebuilt), in essi grava un sovrapprezzo (surcharge); questo sovrapprezzo verrà restituito solo dopo aver ricevuto il vecchio ricambio.
Al ricevimento da parte nostra dei pezzi verificheremo immediatamente se è possibile riaccreditare il sovrapprezzo da voi pagato. La spedizione del vecchio ricambio è a carico
vostro.
BACKORDERS / ORDINI ARRETRATI
I prodotti che non abbiamo disponibili al momento dell’ordine, vengono messi in “backorder”; Ciò significa che non appena il ricambio sarà disponibile presso la nostra sede,
provvederemo a comunicarvelo a mezzo posta. Tale ricambio viene tenuto in prenotazione per voi per una durata di 15 giorni a partire dal giorno di spedizione della lettera postale
da parte nostra. NEL CASO NON RICEVESSIMO vostre notizie entro questo tempo, il pezzo potrà essere venduto a qualsiasi altro cliente. Se ordinate tramite modulo d’ordine o
tramite internet potrete specificare se vorrete o meno ricevere gli articoli non evasi. Nel caso un pezzo in “backorder” non fosse più disponibile, vi verrà comunicato.
6
©
V a n
G e s t e l
B & C
2 0 0 5
How to read and use the part number lists
GB
ILL N°.
Part n°.
QTY
DESCRIPTION
illustration number
Part number
Quantity required
Part description
Illustration number
Exceptions: If a part has no
illustration number it is because
there are several kinds of the part
in question.
e.g. Left and right hand
door panel.
Part number
Exceptions: A part number
may be missing if the part
is no longer obtainable or in
production.
Necessary quantity:
ATTENTION: indicated here is the
quantity of units necessary and not the
quantity of units which are supplied per
order/delivery.
Our parts are sold per unit.
Part description
With dimensions of screws, bolts, cables, etc.
Information about carburetters, electricity etc.,
details about books giving more information
about the part itself: original, reproduction,
reconditioned, etc.
Onderdeelnummer
Uitzonderingen: Een onderdeelnummer kan onbreken
waarneer dit stuk niet meer te
verkrijgen of in produktie is.
Nodige Hoeveelheid
LET OP: Hier wordt de hoeveelheid
stuks die nodig zijn vermeld en niet de
hoeveelheid stuks die worden geleverd
bij bestellingen. Onze onderdelen
worden verkocht per stuk.
Onderdeel beschrijving
Met maten van schroeven, bouten, kabels enz.
Informatie over carburateurs, elektriciteit enz.
Details over boeken die meer informatie geven.
Informatie over het onderdeel zelf: origineel,
reproduktie, gerestaureerd enz.
Numéro de la pièce
Exceptions: Si ce numéro n’est
pas indiqué, c’est parce que
cette pièce n’estplus disponible
ou qu’elle n’est plus en
production.
Quantité nécessaire:
ATTENTION: Sous cette rubrique,
on mentionne la quantité de pièces
qu’il faut et non la quantité de pièces
livrées lors de la commande. Nos pièces
détachées se vendent à l’unité.
Description de la pièce:
Comporte les dimensions des vis, écrous, câbles
etc. Des reseignements au sujet de carburateurs,
électricité etc., des détails concernant des livres
informatifs. Des renseignements au sujet de
la pièce même: pièce d’origine, reproduction,
pièce révisée etc.
Nummer des Ersatzteils:
Ausnahmefall: Mangelt diese
Nummer, dann ist dieser
Einzelteil nicht mehr verfügbar
oder wird er nicht mehr
hergestellt.
Benötigte Menge:
Achtung! Unter diesem Titel wird
die Menge der benötigten Einzelteile
angegeben, sondern nicht die Menge
der bei Bestellungen gelieferten
Einzelteile. Unsere Einzelteile werden
stückweise verkauft.
Beschreibung des Ersatzteils
Betrifft die Abmessungen der Schrauben,
Mutter, Kabel, usw.; Auskünfte über Vergaser,
Elektrizität, usw. Einzelheiten über InfoBücher, Auskünfte über den Einzelteil selbst:
Originaleinzelteil, Reproduction, überholter
Einzelteil usw.
in produzione.
Quantità necessaria
AVVERTENZA: La quantità di pezzi
necessari è data, e non la quantità di
pezzi consegnati dopo ordinazioni. I
nostri componenti vengono venduti
al pezzo.
Descrizioni componenti
Con misure di vite, bulloni, cavi ecc. Informazione
su carburatori, elettricità ecc. dettagli su libri che
danno ulteriore informazione. Informazione
sul componente stesso: originale, riproduzione,
revisionato ecc.
NL
Illustratie nummer
Uitzonderingen: Een onderdeel
heeft geen Illustratie nr. omdat
er meerdere soorten van het
bestaande stuk zijn.
vb. Links en rechts deurpaneel
F
Numéro illustration
Exceptions: Si une pièce détachée
ne comporte pas de numéro
d’illustration, c’est que la pièce
existe en plusieurs versions.
Exemple: Panneau de
porte gauche - droite.
D
Abbildungsnummer:
Ausnahmefall: Wenn ein Einzelteil
keine Abbildungs-nummer hat,
ist das, weil der Einzelteil in
mehreren Fassungen besteht.
Beispiel: Linke - rechte
Türfläche.
I
Numero illustrazione
Eccezioni: Un componente non
ha un numero illustrazione
perchè ci sono vari tipi del pezzo
esistente.
P. es. Pannello porta destro e
sinistro.
©
V a n
G e s t e l
B & C
2 0 0 5
Numero componente
Eccezioni: Può succedere che
non c’è un numero componente
quando il pezzo non è più
disponibile o quando non è più
7
unit serial numbers, production dates & car numbers
Unit serial numbers MK2, 240, 340, some 340 with 3.8 engine
ENGINE NUMBER
GEARBOX NUMBER
REAR AXLE NUMBER
Stamped on the right-hand side of the cylinder block
above oil filter
Stamped on the LH rear top of the main casing and the
top cover
Stamped on the top side of the nose
piece
Prefix
Prefix
Prefix
MK2 (2.4) BG, BJ
MK2 (3.4) KG, KJ
MK2 (3.8) LA, LE
240/340 7J
GB/JS, GB/JC, GBN/JS, JCN, DG250(autom.)
GB/JS, GB/JC, GBN/JS,JCN, DG250(autom.)
GB/JS, GB/JC, GBN/JS, JCN, DG250(autom.)
GBN/JS, JCN, DG250(autom.)
4HA
4HA
4HA
4HA
Unit serial numbers Daimler V8, V8 250
ENGINE NUMBER
GEARBOX NUMBER
REAR AXLE NUMBER
Stamped on the right-hand side of the cylinder block
below the cylinder head, near by the waterpump
Stamped on the LH rear top
of the main casing and the top cover
Stamped on the side of the
nose piece
Prefix
Prefix
Prefix
V8 97331, 741100
V8 250 7A, 7K
GB/JS, GB/JC, GBN/JS, 35EG(autom.)
GBN/JS, JCN, AS1-35EG(autom.)
4HA
4HA
Jaguar production dates, car numbers
MK2 2.4 RHD 100001 on
MK2 2.4 LHD 125001 on
MK2 3.4 RHD 150001 on
MK2 3.4 LHD 175001 on
MK2 3.8 RHD 200001 on
MK2 3.8 LHD 210001 on
Total production 83980
240 2.4 RHD 1J1001
240 2.4 LHD 1J30001
340 3.4 RHD 1J50001
340 3.4 RHD 1J80001
Daimler production dates, car numbers
Daimler V8 RHD 1A1001
Daimler V8 LHD 1A20001
MK2
2.4 RHD
2.4 LHD
3.4 RHD
V8 250 RHD 1K1001
V8 250 LHD 1K30001
3.4 LHD
3.8 RHD
3.8 LHD
START
240/340 240 RHD
240 LHD
340 RHD
340 LHD
START
OKT 1959
100001
125001
150001
175001
200001
210001
SEP 1967
1J1001
1J30001
1J50001
1J80001
SEP 1960
103669
125711
152282
176024
201798
213964
JAN 1968
1J1429
1J30013
1J50480
1J80071
OKT 1963
116114
127312
164002
179499
231586
223182
END 340
MAY 1964
117502
127509
166390
179795
232536
223530
SEP 1968
1J52265
1J80535
APR 1965
118867
127760
168957
180137
233919
224086
DEC 1968
SEP 1965
119200
127822
169341
180188
234125
224150
END 240
DEC 1966
120291
128054
170881
180479
235152
224156
APR 1969
121769
128405
172095
181571
235383
224758
1J3432
1J30571
1J4716
1J30730
END
SEP 1967
DAIMLER V8
RHD
LHD
1A1001
1A20001
8
LHD
JUL 1967
1K1001
1K30001
1K5780
1K30105
END
END
JUN 1967
RHD
START
START
OKT 1962
DAIMLER 250 V8
?
1A20622
AUG 1969
©
V a n
G e s t e l
B & C
2 0 0 5
Index
A
C continued
Accelerator linkage 28-29
Air filter
28-29
Alternator conversion
69
Aluminium radiator
63
Antifreeze
17, 63
Anti-roll bar kit
67
Ash tray
58
Autoglym products
75
Automatic gearbox
39
B
Badge bar
56, 59
Badge, grill
57
Badges
56, 59
Battery conditioner
73
Battery switch
47, 73
Battery
47
Beading set
57
Body parts
53, 54
Bonnet
56
Books
78-86
Boot lid
56
Brake cylinder
45
Brake disc
46
Brake fluid
45 ,68
Brake hose
45
Brake improvements
68
Brake light switch
48
Brake pads Greenstuff 68
Brake parts front/rear 46
Brake pipes
45
Bucket seats
77
Bulb kit
50
Bumpers
56
Bypass thermostat
63
C
Cable indicators
32
Cam alignment tool10, 44, 61
Cam cover
10
Camshaft
10, 61
Cap
72
Car covers
72
Carburettor oil
24, 64
Carburettor pars
24
Castrol oil
74
CD rom
78
Central door locking kit 69
Chain adjusting tool
14
Chain, timing
14
Chamois
75
Choke thermostat
18
Choke warning switch 48, 52
Chrono instruments
77
Clutch
34
Coil
32, 65
Condensor
32
Conolly hide care
75
©
V a n
G e s t e l
B & C
Contact set
32
Control box
48
Cooling improvements 63
Cooling, Daimler
21
Copper grease
41, 70
Core plug set
15
Core plug strap kit
61
Crankshaft
12
Crown wheel and pinion 40
Cylinder head
10
D
Daimler mascot
56
Dash nut spanner
52
Derrington steering wheel 70
Dipstick
15
Direction indicator switch 52
Door seal
55
Door switch
52
Doors
55
Drip pan
73
Dynamo
48
E
Electric window kit
69
Engine mountings
15, 61
Engine paint
11
Engine parts, Daimler 19, 20
Engine tuning parts
61
Exhaust manifold
18
Exhaust system
30-31
Exhaust valve
10
F
Facet fuel pump
64
Fan belt
17, 48
Fan belt, Daimler
21
Fan
17
Federal spinners
70
Fertan
54
Filler cap, fuel
23
Fire extinguisher
73
Flasher box
48
Flexi fan
63
Flywheel
12
Fog lamp, front
50
Fog lamp, rear
51, 73
Formula power lead set 65
Front suspension
42
Fuel filter
23, 64
Fuel pipes
23
Fuel pump
23
Fuel tank
23
Fuse box
48
G
Gaiter, gear lever
58
Gasket set, cylinder head 10
2 0 0 5
G continued
Gasket set, engine
Gear lever knob
Gearbox oil
Gearbox parts
Getrag gearbox
Glove box lock
Glue
Grease pump
Grease
Grill
Grommet kit
Grose jet
12
35
34
35, 37
65
58
58
42
42
57
47, 52
24
H
Hammer, copper
44
Handbrake switch 46, 48, 52
Handbrake
46
Headlamps
50
Headlining
58
Heat reduction products 66
Heater system
22
Heater valve
22
Horn
48
Hydra blade
75
I
I.D. plates
Ignition coil
Ignition switch
Ignition system
Inlet manifold
Inlet valve
Interior light
J
Jack
Jaguar mascot
59
65
52
32
18
10
51
44
56
K
K&N airfilter
64
Kenlowe kit
17, 63
Key-fob
59, 76
King filter
64
Koni shock absorber
67
L
Lead replacement products 74
Leaping cat
56
Lighting switch
52
Lock set
55
Lumenition ignition 32, 65
Luster lace
70
M
Magnetronic ignition
65
Mirror, exterior
57, 60
Mirror, interior
57
Moto-Lita steering wheels 70
O
S continued
Oil 16, 74
Oil cooler
62
Oil drip pan
73
Oil filler cap Aston/Monza 61
Oil filter
16, 19
Oil improvements
62
Oil pressure switch 48, 52
Oil pump
16
Oil seal conversion kit 12, 62
Overdrive
36, 38
Overrider
56
Owners handbook
81
P
Panhard rod
41
Parts catalogues
80
Patch, Jaguar
76
Pedal rubber
28, 34, 45
Penrite oil
74
Pewter models
72
Piston set
12
Power steering
67
Propshaft
39
Radiator
17, 21, 63
Rally instruments
77
Ram pipes
64
Rear axle
40
Rear lamps
51
Rear spring
41
Rear suspension
41
Relais
48
Release bearing
34
Retro trip
77
Reverse light switch 35, 48
Reverse light
73
Rocker covers
61
Rotor
32
Rubber grease
45
Seat belt
Seat foam
Seat runner
Sending unit, fuel
Servo
Shock absorber, front
Shock absorber, rear
Silicone brake fluid
Sill
Slave cylinder
Solenoid, overdrive
Solex carburetor parts
Spark plug
Spax shock absorber
Speedo cable
Spigot bush
T
Tacho generator
Tappet hold-down kit
Thermostat
Timing chain
Tools
Transmission oil
Trim kit
52
61
18
14
44
40
58
U
R
S
Spinners
70
Spin-on oil filter
62
Spot lamp
50
Starter motor
48
Starter motor, modern type
62, 69
Steering improvements 67
Steering
43
Stickers
59
SU carburetor 26-27
Sunvisor
58
Suspension improvements 67
Switches
52
Synchronizer tool
24, 64
58
58
58
23
45
42
41
68
53
34
38
25
32
67
52
12
Umbrella
Union jack accessories
Universal joint
V
Vacuum pipe
Voltage stabilizer
VSP lead substitute
76
76
39
32
48, 52
74
W
Washer system
49
Water pump
17
Water temperature switch 52
Water wetter
63, 73
Waxoyl
54
Wheels
44
Window regulator
55
Windscreen front/rear 55
Windscreen washer
49
Wings
53
Wiper blade
49
Wiper motor
49
Wiper system, improved 69
Wire wheel, competition 70
Wire wheels
44, 70
Wiring loom
47
Wood set
57
Workshop manuals 79, 82
9
Jaguar: Cylinder head
10
©
V a n
G e s t e l
B & C
2 0 0 5
Jaguar: Cylinder head
ILL N° PART N° QTY DESCRIPTION
1 018.076 1
018.077 1
018.078 1
2 018.061 1
3 018.084 1
4 018.062 1
5 018.085 1
6 016.582 1
7 016.581 1
8 012.779 1
9 168.201 1
10 012.832 1
11 168.195 26
12 161.652 26
13 012.833 1
14 161.651 14
15 163.241 10
16 163.242 4
17 012.639 1
18 012.638 1
19 012.808 1
20 017.117 2
21 162.555 2
22 168.195 2
23 012.838 1
24 016.599 2
25 016.594 1
26 162.689 1
27 168.032 1
28 016.600 1
29 174.102 1
30 165.508 2
31 086.628 1
32 165.509 2
33 164.023 2
34 016.601 1
35 012.809 1
36 012.810 1
37 172.881 1
38 016.602 1
39 086.624 1
40 174.103 1
41 164.007 3
42 165.498 3
43 016.574 1
016.575 1
016.876 1
016.580 1
44 016.578 1
016.579 1
45 016.586 2
46 016.587 1
47 016.709 1
48 016.596 1
49 011.914 1
50 062.211 1
51 172.605 1
52 062.349 2
53 172.605 4
54 167.293 6
55 167.304 16
56 012.839 16
57 163.252 16
58 164.002 16
59 161.002 16
60 011.863 3
61 168.198 3
62 167.284 18
167.284 16
167.282 2
©
V a n
G e s t e l
Rebuild cylinder head with cam
shaft
shaft
RH cam cover, inlet
RH cam cover, black, inlet
LH cam cover, exhaust
LH cam cover, black, exhaust
RH cam cover gasket
LH cam cover gasket
Oil filler cap ’Jaguar’crested
Seal for filler cap
Dome nut & washer kit (52 pieces)
for the cam covers & breather cover
Washer, copper
Cam & breather cover nuts
Cylinder head nuts & washer kit
Cylinder head nuts, polished & chrome plated
‘D’ washer chrome plated
Round washer, chrome plated
Reprofiled inlet camshaft
Reprofiled exhaust camshaft
Oil thrower
Engine lifting eye
Screw ¼ “UNC, blanking plate
Washer, copper
Flanged blanking plate
Gasket, adaptor or blanking plate
Sealing ring
Screw, oil thrower plate
Washer, copper
Gasket
Locking plate
Screw, adaptor plate to Cylinder head
Rev.counter box, on inlet camshaft
Screw, Allen head
Washer, spring
Seal between cover and rear bearing cap
Adaptor piece
Driving dog
Circlip, driving dog to adaptor
‘O’ring
Generator for electric rev. counter
Locking plate
Washer, spring
Screw, Allen head
Cylinder head gasket set
Bottom gasket set (less oil seals),
Head gasket
Head gasket
Gasket, exhaust manifold
Gasket, inlet manifold
Gasket, inlet manifold
Gasket, breather cover
Baffle plate, breather
Flexible hose, for breather
Clamp, upper
Rubber breather hose
Clip, hose
Stud, front, cam cover
Stud, cam bearing cap and cam cover
Ring-dowel on stud
‘D’washer
Washer, spring
Nut
Plug, on top of cylinder head
Washer, copper
Stud, inlet manifold
B & C
2 0 0 5
APPLICATION
ILL N° PART N° 2.4
63 164.002 18 Washer, spring
64 161.030 18 Nut, brass
65 167.280 14 Stud, exhaust manifold
167.378 2 Stud, exhaust manifold
66 164.002 16 Washer, spring
67 161.030 16 Nut, brass
68 017.272 1 Oil pipe assembly
011.878 1 Oil pipe assembly
69 165.415 3 Banjo bolt
70 168.200 6 Washer, copper
71 011.916 2 Core plug
72 012.807 12 Tapped guide, fit and ream
73 012.763 6 Inlet valve guide, 47.22mm
012.764 6 Inlet valve guide, bronze
012.765 6 Exhaust valve guide, 49.61mm
74 012.757 6 Inlet valve, 44.5mm, 30°,104.3mm
012.758 6 Exhaust valve, 36.57mm, 45°, 102.24mm
012.759 6 Inlet valve, 44.5mm, 45°, 105.60
012.760 6 Exhaust valve, 41.3mm, 45° 103.70
75 012.773 12 Cupped washer, valve spring
76 012.756 1 Valve spring set
77 012.767 12 Seal, valve stem if required
78 012.774 12 Collar, valve stem
79 012.775 24 Cotter, valve stem
80 012.806 12 Tappet
81 012.780 A/R Valve adjusting shim, .085” A
012.781 A/R Valve adjusting shim, .086” B
012.782 A/R Valve adjusting shim, .087” C
012.783 A/R Valve adjusting shim, .088” D
012.784 A/R Valve adjusting shim, .089” E
012.785 A/R Valve adjusting shim, .090” F
012.786 A/R Valve adjusting shim, .091” G
012.787 A/R Valve adjusting shim, .092” H
012.788 A/R Valve adjusting shim, .093” I
012.789 A/R Valve adjusting shim, .094” J
012.790 A/R Valve adjusting shim, .095” K
012.791 A/R Valve adjusting shim, .096” L
012.792 A/R Valve adjusting shim, .097” M
012.793 A/R Valve adjusting shim, .098” N
012.794 A/R Valve adjusting shim, .099” O
012.795 A/R Valve adjusting shim, .100” P
012.796 A/R Valve adjusting shim, .101” Q
012.797 A/R Valve adjusting shim, .102” R
012.798 A/R Valve adjusting shim, .103” S
012.799 A/R Valve adjusting shim, .104” T
012.800 A/R Valve adjusting shim, .105” U
012.801 A/R Valve adjusting shim, .106” V
012.802 A/R Valve adjusting shim, .107” W
012.803 A/R Valve adjusting shim, .108” X
012.804 A/R Valve adjusting shim, .109” Y
012.805 A/R Valve adjusting shim, .110” Z
83 015.717 1 Cam bearing set
84 011.913 1 Clamp, lower
85 167.294 4 Stud, breather cover
86 167.296 4 Stud, timing cover
87 016.594 1 Sealing ring at end of covers
88 200.839 1 Cam alignment tool
3.4
3.8
240 & 340
240 & 340
2.4 & 3.4
3.8
240 & 340
all models
2.4, 3.4, 240 & 340
3.8
2.4, 3.4 & 3.8
240 & 340
early models
QTY DESCRIPTION
APPLICATION
Partn°
2.4
3.4 & 3.8
3.4 & 3.8
200.839
Cam alignment tool
2.4
2.4
3.4 & 3.8
3.4 & 3.8
2.4
3.4 & 3.8
oversize +0.005”
as above but made
of bronze
2.4
2.4
3.4 & 3.8
3.4 & 3.8
Description
187.014
Primer for aluminium
187.143
Green, 2.4
187.144
Blue, 3.4 & 3.8
187.146
Gold, 4.2
11
Pistons, crankshaft and engine bearings
12
©
V a n
G e s t e l
B & C
2 0 0 5
Pistons, crankshaft and engine bearings
APPLICATION
Info:
Pistons are supplied in sets of six and come complete with piston rings and piston pin. It is
recommended that all pistons are measured prior to final bore finishing adding the appropriate
clearance as per the manufacturer’s specifications.
Piston ring sets: We supply ‘Grant’or ‘Deves’ replacements sets manufactured in the USA
1 014.840 1 Piston set STD
2.4 3 ring piston
014.842 1 Piston set 0.20”
Standard bore size 83mm
014.843 1 Piston set 0.30“
Recommended clearance
014.844 1 Piston set 0.40”
0.0025”- 0.003”
014.846 1 Piston set 0.60”
014.660 1 Piston set STD
3.4 4 ring piston
014.662 1 Piston set 0.20”
014.663 1 Piston set 0.30“
Compression ratio 8:1
014.664 1 Piston set 0.40”
0.003”-0.004”
3.8 3 ring piston
014.672 1 Piston set 0.20”
014.673 1 Piston set 0.30“
014.674 1 Piston set 0.40”
0.005”-0.006”
014.682 1 Piston set 0.20”
014.683 1 Piston set 0.30”
014.684 1 Piston set 0.40”
2
014.850
014.852
014.853
014.854
014.856
1
1
1
1
1
Piston ring set STD
Piston ring set 0.20”
3.8 3 ring piston
0.005”-0.006”
2.4 engine, 83mm bore size
4 ring set
Fits Hepolite 14914 &
County CP409K
014.690 1 Piston ring set STD
014.692 1 Piston ring set 0.20”
3.4 engine, 83mm
standard bore size
2 comp ring 2mm
2 oil ring 4mm
Fits Hepolite 3 ring &
County 4 ring
014.720 1 Piston ring set STD
3.8 engine, 83mm
standard bore size
2 comp.ring 2mm
1 oil ring 4mm
Fits Hepolite 18393,
20615,16586 &
County CP411, CP411A
©
V a n
G e s t e l
B & C
2 0 0 5
APPLICATION
Our piston liners are parallel boring type, semi finished bore less 1mm
Fitting instructions: Measure each liner and machine the cylinder block with
appropriate interference fit
3 014.669 6 Piston liner 2.4 & 3.4 engine
014.679 6 Piston liner 3.8 engine
4 015.700  1 Main bearing set STD
015.701 1 Main bearing set 0.10”
5 015.719 1 Thrust washer set STD
015.059 1 Thrust washer set 0.004”
6 015.710 1 Conrod bearing set STD
015.711 1 Conrod bearing set 0.10”
7 013.594 6 Conrod with oil feed to end bush
8 013.180 6 Small end bush
9 165.499 12 Bolt, con rod
10 161.669 12 Nut, self locking type
11 016.580 1 Bottom gasket set (less oil seals)
12 016.725 1 Sump gasket (two halfs)
13 016.618 1 Rear oil seal, rope type
14 016.573 1 Front oil seal
15 011.917 1 Improved rear oil seal kit
16 016.859 1 Oil seal only
17 013.870 1 Crankshaft
013.622 1 Crankshaft
18 011.124 1 Spigot bush
19 172.888 2 Dowel pin, flywheel to crankshaft
20 011.876 2 Dowel pin, clutch cover to flywheel
21 016.603 2 Rear oil seal, rope type (original)
22 165.430 10 Screw, flywheel to crankshaft
23 174.100 1 Lock plate
24 165.500 6 Plug, screw type
25 172.886 4 Key
26 011.867 1 Ring gear, for flywheel, 104 teeth
27 013.613 1 Gear, oil pump/ignition drive
28 013.614 1 Gear timing chain
29 013.626 1 Oil thrower
30 011.932 1 Distance piece
31 011.928 1 Cone
32 011.904 1 Damper, rebuild
33 011.874 1 Crankshaft pulley, single groove
017.228 1 Crankshaft pulley, double pulley
34 163.253 1 Washer special
35 174.099 1 Locking plate
36 162.008 4 Bolt, pulley to damper
37 164.031 2 Washer, shake proof
38 165.538 1 Bolt, securing pulley/damper
Nominale dimensions
3.267 x 3.393 x 6.978
Nominale dimensions
3.425 x 3.562 x 6.980
2.4, 3.4 & 3.8
STD dia. 69.850/69.850mm
2.4. 3.4 & 3.8
2.4, 3.4 & 3.8
3.4 & 3.8
all models
machining crankshaft to 75mm
2.4
3.4 & 3.8
13
Jaguar: Timing chain, timing gear and dampers
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
QTY DESCRIPTION
012.998 2 Camshaft sprocket
012.848 2 Later type camshaft plate
013.683 2 Circlip
165.556 4 Screw, sprocket to camshaft
013.848 1 Idler sprocket, 21 teeth
013.849 1 Eccentric shaft
013.695 1 Plug in end of the shaft
013.697 1 Micro adjustment plate
013.692 1 Plugner pin
013.693 1 Spring
012.772 1 Intermediate sprocket & inner bush
012.847 1 Bush only
013.850 1 Intermediate shaft
013.730 A/R Shim
172.898 1 Clip
013.605 1 Upper chain,100 links
013.606 1 RH Upper damper
013.607 1 LH Upper damper
013.725 4 Distance tube
200.873 1 Chain adjusting tool
013.813 1 Lower chain, 68 links
013.604 1 Lower chain, 82 links
013.608 1 RH lower damper, early engines
013.609 1 RH lower damper, late engines
14
APPLICATION
wil fit also early cars
2.4 & 240
3.4, 3.8 & 340
ILL N° PART N° 22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
174.158
013.610
174.159
013.612
174.110
011.980
016.573
016.849
016.592
167.282
168.199
161.002
167.280
164.031
161.002
162.081
162.703
162.025
164.002
162.577
165.359
162.674
162.048
164.006
APPLICATION
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
2
2
2
4
4
4
A/R
A/R
A/R
3
A/R
1
1
1
5
Tap washer
LH lower damper
Tap washer
Tensioner assembly
Tab washer
Filter
Oil seal, front
Gasket, front Gasket, front
Stud, upper
Washer, copper
Nut
Stud, lower
Washer, shakeproof
Nut
Bolt 1 3/8” check length
Bolt 1 3/4”, check length
Bolt 2 2/4” check length
Washer, spring
Bolt 1 1/8”
Bolt 3/8”UNF x 1 3/8”, check length
Bolt 3/8”UNF x 1 3/4” check length
Bolt 3/8”UNF x 1 5/8” check length
Washer, spring
©
V a n
2.4 & 240
3.4, 3.8 & 340
G e s t e l
B & C
2 0 0 5
Jaguar: Engine mountings, engine block & sump
1 017.266 1 Universal stud kit
2 167.265 10 Stud, plain, 6.3/8”
167.272 3 Stud, plain, 6.13/16”
3 167.266 1 Stud with dowel, 6.3/8”
167.273 1 Stud with dowel, 6.13/16”
4 017.273 1 RH front engine bracket
5 017.049 2 Engine mounting, standard
017.102 2 Engine mounting, uprated
6 017.274 1 LH front engine bracket
7 017.275 1 RH front engine bracket
8 017.276 1 LH flange engine bracket
9 165.503 2 Bolt, mounting to bracket
10 162.020 4 Screw, mounting to flange bracket
11 027.481 1 RH rear steady bracket
12 027.482 1 LH rear steady bracket
13 017.187 1 Steady link
14 163.362 1 Stepped washer
15 017.137 1 Mounting rubber
16 163.361 1 Stepped washer
17 161.025 1 Nut, locking
18 045.039 1 Bush, lower, standard
041.912 1 Bush, lower, Polyurethane
19 162.667 1 Bolt, lower
20 161.079 1 Nut, locking
21 027.483 1 Spring retainer, O/D gearboxes only
22 027.389 1 Spring, non O/D gearboxes
171.145 2 Spring, all other gearboxes
23 027.387 1 Rubber spring seat
©
V a n
G e s t e l
B & C
2 0 0 5
APPLICATION
ILL N° PART N° with or without lifting brackets
use 13 if lifting bracket
is not fitted
With lifting bracket
If no brackets are fitted
with lifting brackets
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
QTY DESCRIPTION
027.398 1
017.132 1
165.415 1
168.200 2
011.921 1
168.198 1
168.223 2
011.862 6
168.196 6
011.920 1
017.277 1
011.894 1
011.863 1
168.198 1
011.977 2
011.976 2
168.288 1
167.376 2
017.255 1
017.238 1
173.105 2
011.864 1
017.141 1
168.197 1
162.045 1
162.005 25
164.002 26
017.430 1
APPLICATION
Rubber centre bush
Core plug set, dish type
Bolt, oil feed
Washer, copper
Drain tap, cylinder block
Washer, copper
Washer, fibre
Plug, side gallery
Washer, copper
Screw, plug
Dipstick
Felt for dipstick
Plug, screwed
Washer, copper
Dowel, clutch housing location
Dowel, timing cover location
‘O’ring between pipe & sump
Stud, fixing pipe
Oil pipe, sump to oil filter
Hose,oil return
Clamp
Oil drain plug, brass
Oil drain plug, magnetic
Washer, drain plug
Screw 5/16”x 5/8” short
Screw 5.16”x 3/4” long
Washer, spring
Core plug strap kit
15
Jaguar: Oil filter and pump
1 011.740 1 Paper oil filter & seal
2 168.004 1 Washer, felt
3 011.985 1 Spring
4 016.043 1 Rubber washer 3/8” ID
168.017 1 Rubber washer 1/2” ID
5 168.219 1 Sealing ring, comes with oil filter
6 011.995 1 Relief valve
013.855 1 Relief valve
7 011.996 1 Spring release valve
013.857 1 Spring release valve
8 011.998 1 Spider & pin ass.
013.867 1 Spider & pin ass.
9 016.838 1 Sealing ring
10 017.238 1 Hose between filter head and sump
11 172.060 2 Clamp
12 013.618 1 Drive shaft
13 172.880 1 Key, drive shaft
14 013.671 1 Drive shaft bush
15 013.633 1 Washer
16 013.616 1 Drive gear
16
APPLICATION
Tecalemit FA 2705,
2720, 2741
Tecalemit FA 2744,
2114, 2122
Tecalemit FA 2741
Tecalemit FA 2744,
2114, 2122
Tecalemit FA 2720
Tecalemit FA 2741
Tecalemit FA 2744
Tecalemit FA 2114,
2122
APPLICATION
17 174.101 1 Lock tab washer
18 161.282 1 Flat nut 9/16”UNF
19 013.615 1 Coupling bush
20 013.602 1 Oil pump, large bore
21 013.666 1 Adaptor piece, small to large bore
22 013.670 1 ‘O’ring small bore, for original pump
016.629 1 ‘O’ring large bore, for large pump
23 013.670 1 ‘O’ring delivery pipe
24 013.672 1 Delivery pipe
013.862 1 Delivery pipe
25 016.611 1 Gasket
26 013.861 1 Suction pipe
27 013.665 1 Spring
28 016.836 1 Sealing ring at bottom
29 016.619 1 Gasket, filter head
32 174.141 1 Support bracket
33 013.662 2 Clip, delivery pipe
34 013.663 2 Clip, suction pipe
35 300.522 A/R 4.5L Castrol classic oil, 20W50
36 300.501 A/R 5L Penrite classic oil, 20W/60
©
V a n
Use also adaptor 013.666
2.4
3.4 & 3.8
Tecalemit FA 2705,
2720, 2741
Tecalemit FA 2744
Tecalemit FA 2114,
2122
G e s t e l
B & C
2 0 0 5
Jaguar: Cooling system
1 060.090 1
060.152 1
2 061.419 1
061.021 1
061.089 1
3 061.441 8
4 061.489 4
5 163.383 4
6 164.032 2
7 165.469 2
8 161.025 2
9 159.799 1
10 164.031 4
11 161.002 4
12 062.185 1
13 061.504 1
14 168.101 A/R
15 061.399 1
061.329 1
16 016.590 1
17 165.431 1
18 161.362 1
19 017.270 1
20 063.390 1
21 168.197 1
22 061.333 1
061.538 1
©
V a n
G e s t e l
Radiator, manual & O/D models
See also cooling improvement page
Radiator, Automatic models
Radiator filler cap, 4lbs, most common
Radiator filler cap, 7lbs
Radiator filler cap, 13lbs, ask for
details
Pad, mounting
Tube, distance
Washer, plain
Washer, internal tooth
Bolt
Nut
Cowl, fibre glass
Washer, internal tooth
Nut
Overflow pipe
Radiator drain tap
Washer, fibre
Water pump
Repair kit
Gasket
Bearing location screw
Lock nut
Universal fitting kit for water pump,
studs, bolts, washers & nuts
Adaptor, heater water outlet
Washer, copper
Pulley, waterpump, single belt
Pulley, waterpump, double belt
B & C
2 0 0 5
APPLICATION
ILL N° PART N° 23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
QTY DESCRIPTION
061.342 1 Fan
061.343 A/R Balance piece
162.022 4 Screw
164.002 4 Washer, spring
061.554 1 Fan belt, single
061.514 1 Fan belt, single
061.555 1 Fan belt, double
061.513 1 Fan belt, double
062.354 1 Top hose
062.358 1 Top hose
062.283 1 Bottom hose
062.356 1 Bottom hose
172.265 4 Clamp
062.351 1 By-pass hose
172.265 2 Clamp
186.159 3 4L Castrol anti-freeze, up to -36°
061.491 1 Jockey pulley, single belt
061.492 1 Jockey pulley, double belt
161.021 1 Nut, locking
017.271 1 Carrier or lever
017.251 1 Bracket
171.137 1 Spring, belt tensioning
174.161 11 Thrust washer, limiting stop
017.252 1 Bush, fitted in bracket
161.330 1 Locknut, thin
185.127 1 Kenlowe kit
APPLICATION
2.4 early models
3.4 & 3.8 early models
2.4 late models & 240
3.4, 3.8 late models & 340
2.4, 3.4 & 3.8 & 240
340
3.4, 3.8 & 340
2.4 & 240
2.4
3.4 & 3.8
240 & 340
17
Jaguar: Manifolds and thermostats
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
017.297
017.298
018.088
167.286
164.002
161.002
016.630
167.084
164.002
161.002
167.084
164.002
161.002
012.013
012.057
016.597
063.390
168.197
011.882
017.299
167.286
164.002
161.002
012.814
086.625
016.484
165.561
18
QTY DESCRIPTION
1
1
1
4
4
4
4
8
8
8
2
2
2
1
1
1
1
1
1
1
8
8
8
1
1
1
3
Inlet manifold 2.4
Water outlet pipe
Water outlet elbow
Stud, carburettor to manifold
Washer, spring
Nut
Gasket, water outlet pipe to manifold
Stud
Washer, spring
Nut
Stud, water elbow
Washer, spring
Nut
Thermostat, 74 C°, see also cooling improvement page
Thermostat, 82 C°, see also cooling improvement page
Gasket
Adaptor, heater system
Washer, copper
Inlet manifold 3.4
Inlet manifold 3.8.
Stud, carburettor to manifold
Washer, spring
Nut
Water outlet elbow
Thermostat, choke, not for 2.4 & 240
Gasket
Screw, UNC
ILL N° PART N° 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
QTY DESCRIPTION
164.016 3 Washer, shakeproof
017.301 1 Inlet manifold 240
017.302 1 Inlet manifold 340
016.806 1 Gasket, housing to inlet manifold
018.070 1 Thermostat housing
167.084 3 Stud
161.002 3 Nut
016.848 1 Gasket, thermostat
017.303 1 Water outlet, 240 & 340
167.084 2 Stud
161.002 2 Nut
110.615 1 Front exhaust manifold, 2.4 & 240
110.616 1 Rear exhaust manifold, 2.4 & 240
016.730 2 Gasket
167.288 8 Stud, manifold
167.290 A/R Repair stud
161.006 8 Nut, brass
110.623 1 Front exhaust manifold 3.4, 3.8 & 340
110.624 1 Rear exhaust manifold 3.4, 3.8 & 340
167.28414/16 Stud, manifold, automatic cars use 16
167.378 2 Stud
161.030 16 Nut, brass
©
V a n
G e s t e l
B & C
2 0 0 5
Daimler: Cylinder head, oil filter and pump
Daimler
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
©
018.089
016.879
016.880
016.881
016.882
018.090
018.091
018.092
013.871
018.093
013.872
013.873
013.874
013.875
013.876
018.094
018.095
V a n
QTY DESCRIPTION
2
2
8
1
2
8
8
8
8
8
8
8
8
8
8
8
8
G e s t e l
Cylinder head, tubes for spark plug not included
Gasket rocker cover
‘O’ring, fits between nut and rocker cover
Full gasket set, cylinder heads & engine bottom set
Cylinder head gasket
Inlet valve
Exhaust valve
Inlet valve guide
Inlet valve guide, modified, including valve seal
Exhaust valve guide
Exhaust valve guide, modified, including valve seal
Valve spring, inner
Valve spring, outer
Push rod, inlet
Push rod, exhaust
Rocker, inlet
Rocker, exhaust
B & C
2 0 0 5
ILL N° PART N° 16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
018.096
018.097
018.098
011.038
168.219
168.217
016.043
016.883
013.877
016.884
013.878
013.879
018.099
300.522
300.501
018.100
QTY DESCRIPTION
16
20
16
1
1
1
1
1
1
1
1
1
1
1
1
16
Spring, rocker
Bolt, cylinder head to engine block
Tappet
Oil filter element & seals
Sealing ring
Felt washer
Washer, rubber
Gasket, filter head to engine block
Oil pump
Gasket, oil pump
Spring, relief valve
Relief valve
Spiral gear, oil pump
4.5L Castrol classic oil, 20W/50
5L Penrite classic oil
Ball end for tapped
19
Daimler: Engine block parts and engine mountings
ILL N° PART N° 1
2
3
4
5
6
7
8
014.902
014.904
014.930
014.932
014.934
015.290
015.291
015.292
015.293
015.294
015.745
015.746
015.747
015.300
015.301
015.302
015.303
015.304
013.880
016.881
013.881
20
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
8
1
1
Daimler
Piston set,.+020”
Piston set, +040”
Piston ring set, STD
Piston ring set, 020”
Piston ring set, 040”
Main bearing set, STD
Main bearing set, .010”
Thrust washer set, STD
Thrust washer set, .0025”
Thrust washer set, .005”
Conrod bearing set, STD
Conrod bearing set, .010”
Small end bush
Full gasket set, cylinder heads & engine bottom set
Crankshaft
ILL N° PART N° 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
QTY DESCRIPTION
011.124 1
017.304 1
017.305 1
017.306 1
017.307 1
015.748 1
013.882 1
013.612 1
017.308 1
016.885 1
017.309 1
165.428 1
165.427 4
168.291 10
018.101 1
011.865 1
168.197 1
017.049 2
017.102 2
086.624 1
Spigot bush, manual gearbox
Spigot bush, automatic gearbox
Crankshaft damper
Hub, camshaft damper
Pulley, manual steering
Camshaft bearing kit
Timing chain
Hydraulic chain tensioner
Timing cover
Gasket, timing cover
Oil feed pipe, block and cylinderhead
Banjo bolt, long
Banjo bolt, short
Washer, copper
Oil filler cap
Oil drain plug
Washer
Engine mounting
Engine mounting, uprated
Generator for electric rev. counter
©
V a n
G e s t e l
B & C
2 0 0 5
Daimler: Cooling system
Daimler
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
©
QTY DESCRIPTION
060.156 1 Radiator, manual & O/D models
060.157 1 Radiator, Automatic models
061.481 1 Radiator filler cap, 4lbs
061.441 8 Pad, mounting
061.489 4 Tube, distance
163.383 4 Washer, plain
164.032 4 Washer, internal tooth
165.469 4 Bolt
161.025 2 Nut
062.185 1 Overflow pipe
061.504 1 Radiator drain tap
168.101 A/R Washer, fibre
012.013 1 Thermostat 74C°
012.057 1 Thermostat 82C°, cold climate/winter
016.597 1 Gasket
017.310 1 Water outlet elbow
162.090 2 Screw
V a n
G e s t e l
B & C
2 0 0 5
ILL N° PART N° 17
18
19
20
21
22
23
24
25
26
27
28
29
30
018.054
061.581
061.483
016.886
165.431
161.362
164.007
061.522
061.491
161.021
061.577
061.578
061.579
061.580
172.268
016.887
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
Temperature transmitter
See engine gasket set
Repair kit for water pump
Water pump, new
Gasket, waterpump
Screw, location
Lock nut
Washer, shakeproof
Belt, water pump
Jockey pulley
Lock nut
Belt, dynamo
Belt, alternator
Top hose
Bottom hose
Clamp
Gasket, manifold
21
Jaguar and Daimler: Heater system
Foto 159.902
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
063.567
063.568
063.585
122.500
164.012
161.019
088.037
121.893
063.569
063.586
063.587
171.131
063.588
063.497
168.100
062.367
063.565
063.589
062.361
063.590
063.390
168.197
22
QTY DESCRIPTION
1
1
6
3
3
3
1
1
1
2
1
2
1
1
1
2
1
1
1
1
1
1
Heater motor
Runner, fan
Grommet, fan motor
Grommet, heater box to bulkhead
Washer, spring
Nut
Resistor, heater motor
Pad, heater box to body
Heater matrix
Pad
Internal seal kit, felt
Spring, air control flap
Seal, heater box to bulkhead
Heater valve
‘O’ring
Hose, elbow
Feed pipe, Jaguar
Feed pipe, Daimler
Hose, Jaguar
Hose, Daimler
Adaptor, not Daimler
Washer, not Daimler
ILL N° PART N° 19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
QTY DESCRIPTION
063.564 1 Return pipe, rear, Jaguar
063.591 1 Return pipe, rear, Daimler
062.361 1 Hose
063.540 1 Return pipe, front, Jaguar
063.592 1 Return pipe, front, Daimler
063.261 1 Hose
172.060 A/R Clamp
063.570 1 Air hose, RH
063.571 1 Air hose, LH
063.488 2 Escutcheon
161.024 4 Nut
063.593 2 Knob
165.931 2 Screw, fixing knob
134.098 2 Cable, control, cut to length
122.014 2 Grommet
063.594 1 Cable clamp
161.024 1 Nut
107.039 2 Clip, retaining control cable
172.056 1 Trunnion
162.135 1 Screw
©
V a n
G e s t e l
B & C
2 0 0 5
Fuel tank, pipes, lines and hoses
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
©
QTY DESCRIPTION
100.086 1 Fuel tank
108.277 1 Filter, fuel tank
168.256 1 Gasket for filter
108.426 1 Grommet
108.411 1 Filler cap
101.057 1 Filler cap, alternative
101.596 1 Filler cap & lock
041.760 6 Mounting pad
061.422 3 Tube, distance
161.337 3 Nut, locking
108.427 1 Sending unit
016.024 1 Gasket
108.593 1 Screw & washer kit
101.652 1 Fuel pump, LCS
101.052 1 Fuel pump, AUF305, some late 240 & 340 models
108.231 1 Mounting kit
102.079 2 Banjo bolt
102.080 4 Washer, fibre
108.428 1 Hose, tank to pump
102.019 1 Grommet
108.429 1 Hose, pump to fuel line
161.067 1 Nut, alternative
172.966 3/5 Clip, pipe to body
173.072 7 Clip, pipe to body
101.977 1 Fuel filter assembly
101.983 1 Fuel filter only, 38mm dia
108.248 1 Fuel filter only, 50mm dia
101.986 2 Banjo bolt
168.223 4 Washer, fibre
108.611 1 Fuel line kit, needs some modification for Daimler V8
V a n
G e s t e l
B & C
2 0 0 5
ILL N° PART N° 27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
QTY DESCRIPTION
101.963 1 Fuel hose, flexible
108.613 1 Fuel pipe, from flex hose to filter
108.614 1 Fuel pipe, from filter to carbs.
108.615 1 Fuel pipe, nylon, filter to carb. pipe
108.616 1 Fuel pipe, carb. to carb.
101.976 1 Fuel hose, filter to carb. pipe
108.617 1 Fuel pipe, nylon, filter to carb. pipe
108.618 1 Fuel pipe, filter to carbs., Daimler V8
102.079 A/R Banjo bolt, fuel pipe to carbs.
102.080 A/R Washer, fibre
109.011 2 Banjo bolt, fuel pipe to carbs., 2.4
168.292 2 Washer, fibre, large
168.293 2 Washer, fibre, small
109.012 2 Filter
23
Carburettors, service kits and tools
1 109.010 1
2 107.007 1
3 107.167 1
4 330.070 1
5 102.278 2
102.281 2
6 102.275 1
7 200.572 1
8 102.302 1
9 102.216 A/R
24
Pair Solex carburettors, 2.4
Pair HD6 carburettors 1.3/4”, 3.4 & 3.8 less needle
Pair HS6 carburettors 1.3/4”, 240
125ml carburettor oil
Oversize shaft for HD6 carburettors
Oversize shaft for HS6 carburettors
Reamer tool for OVERSIZE shaft only.
This tool can be used on all SU’s: HD & HS types.
Once you have this tool, you can easily repair worn out carburettors
when an oversize shaft is required
Carburettor synchronizer
SU tool kit, 3 piece
Grose jet: Improvement for the standard needle and seat.
This efficient fuel cut-off is based on a ball system
10 190.225 1
11 198.015 1
12 109.009 2
13 109.001 2
14 109.008 1
15 102.713 2
16 102.710 2
17 102.712 2
18 102.316 2
19 102.434 2
20 107.168 1
21 107.169 1
22 102.259 2
Book, SU carburettors. For maintaining, tuning and restoration.
Also includes SU fuel pump repair.
Carburettor cleaner spray, for restoration and maintenance
Gasket pack, for one Solex carburettor
Service kit, for one Solex carburettor
Rebuilding kit, for one pair carburettors
Gasket pack, for one HD6 1.3/4”
Service kit, for one HD6 1.3/4
Rebuilding kit, for one HD6 1.3/4
Sundries kit, for one HD6 1.3/4
Gasket pack, for one HS6 1.3/4
Service kit, for two HS6 1.3/4
Rebuilding kit, for two HS6 1.3/4
Sundries kit, for one HS6 1.3/4
©
V a n
G e s t e l
B & C
2 0 0 5
Solex carburettor parts
109.001 Service kit
109.008 Rebuilding kit
ILL N° PART N° 1
2
3
4
5
6
7
8
109.010
016.888
016.889
164.002
161.002
109.011
168.292
109.012
©
V a n
QTY DESCRIPTION
1
4
2
4
4
2
2
2
G e s t e l
Pair Solex carburettors
Gasket
Spacer, insulator
Washer, spring
Nut, carburettor to manifold
Banjo
Washer, large
Filter, fits on banjo
B & C
2 0 0 5
109.009 Gasket set
9 168.293 2
10 109.013 2
11 109.014 2
12
13 109.009 2
14 109.001 2
15 109.008 1
Washer, small
Needle and seat
Float
See tool catalogue 190.028
Gasket pack, for one carburettor
Service kit, for one carburettor
Rebuild kit, for two carburettors
25
Carburettor parts HD6
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
016.222
016.250
016.261
164.002
161.002
107.008
102.343
102.080
102.012
102.010
102.011
107.170
107.171
107.009
102.818
102.007
102.754
102.756
107.030
102.012
164.015
102.746
102.745
102.742
102.741
102.044
102.045
102.767
164.015
107.012
107.012
102.784
102.785
102.068
102.330
102.074
102.315
102.389
102.216
102.071
26
QTY DESCRIPTION
2
4
2
8
8
2
2
2
6
2
2
2
2
2
2
2
2
2
1
2
2
2
2
2
2
2
2
8
8
1
1
1
1
2
2
2
2
2
2
2
Gasket, air intake
Gasket
Insulator
Washer, spring
Nut
Damper with solid brass cap
Damper, black plastic, late models
Washer, fibre
Screw, zinc plated
Spring
Washer under spring
Needle, SC, Jaguar
Needle, TM, Jaguar
Needle, TL, Jaguar
Needle, TZ, Daimler V8
Screw, needle locking
Slow running adjustment kit
Gasket
Adaptor for push-on connector
Screw
Washer, spring
Bearing kit, jet
Housing for jet
Jet assembly & diaphraghm 0.100”
Spring, diaphraghm
Adjusting screw
Spring
Bolt, chamber mounting
Washer, spring
Front float chamber
Rear float chamber
LH 30° float chamber, Daimler
RH 30° float chamber, Daimler
Float
Lever
Pin
Needle & seat
Needle & seat with viton head
Grose jet
Gasket
ILL N° PART N° 32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
102.331
102.070
102.332
102.069
107.173
107.174
102.077
102.075
102.076
102.078
102.079
102.080
102.082
102.629
102.348
102.265
102.050
102.760
102.761
107.059
102.768
102.770
102.766
102.079
102.765
102.763
102.764
107.014
102.773
102.774
103.286
102.855
102.324
102.055
102.056
102.057
107.022
102.048
164.015
161.072
171.133
QTY DESCRIPTION
1
1
1
1
1
1
2
2
2
2
2
4
2
2
4
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
4
4
1
1
1
1
1
Lid, rear, AUC 4260
Lid, rear, AUD 2283
Lid, front, AUC 4261
Lid, front, AUD 2284
LH lid, AUD 9238, Daimler V8
RH lid, AUD 9579, Daimler V8
Overflow pipe, cut to length
Cap nut, brass
Washer, aluminium
Washer, fibre
Banjo bolt
Washer, fibre
Filter
Shaft, standard
Repair bush, ream body to 9.5mm
Disc 1.3/4”
Screw
Thermostat body
Jet, acceleration needle
Dust shield fixing kit
Acceleration needle
Spring
Washer kit
Banjo bolt
Banjo bolt
Bracket
Connection arm
Solonoid assembly
Cap, solenoid
Strap
Screw, clamping
Connection rod 4.7cm
Coupling assembly
Bolt
Washer, plain
Nut
Lever
Bolt
Washer, spring
Nut
Throttle return spring, most common
©
V a n
G e s t e l
B & C
2 0 0 5
Carburettor parts HS6, 240 models only
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
©
016.251
016.485
101.970
164.002
161.002
102.343
102.080
102.012
102.010
107.009
102.007
102.044
102.045
102.003
107.103
107.104
102.440
102.123
102.124
102.125
102.016
102.126
102.264
102.113
102.265
102.050
102.425
102.115
102.570
102.116
102.110
102.045
102.596
102.594
V a n
QTY DESCRIPTION
2
4
2
8
8
2
2
6
2
2
2
2
2
2
1
1
2
2
2
2
2
2
2
2
2
4
2
2
2
2
2
2
2
2
G e s t e l
Gasket, air intake
Gasket
Insulator
Washer, spring
Nut
Damper, black plastic
Washer, fibre
Screw, zinc plated
Spring
Needle, TL
Screw, needle locking
Adjusting screw
Spring
Piston lifting kit
Jet, front
Jet, rear
Gland rubber
Bearing, jet
Washer, brass
Screw, jet locking
Spring
Screw, jet adjusting
Shaft, standard size
Bush kit, ream carb. body to 9.5mm
Disc 1.3/4”
Screw, disc
Washer, brass
Lever, lost motion
Tab washer
Nut, lever
Screw, throttle stop
Spring
Bracket, linkage to jet
Screw
B & C
2 0 0 5
34 102.130 1
102.145 1
35 102.131 1
102.144 1
36 102.136 2
37 102.135 2
38 102.134 2
39 165.530 2
40 164.012 2
41 163.010 2
42 102.564 2
102.800 1
102.801 1
43 102.315 2
102.156 2
102.216 2
44 102.107 2
45 102.074 2
46 102.237 2
47 102.104 1
102.138 1
48 102.012 6
49 164.015 6
50 102.324 2
51 102.055 8
52 102.056 8
53 102.057 8
54
Spring, pick-up lever, front carb.
Spring, pick-up lever, rear carb.
Spring, lever cam, front carb.
Spring, lever cam, rear carb.
Pivot bolt.
Washer, spring
Tube
Bolt, float chamber to body
Washer, spring
Washer, plain
Chamber, float
Adaptor, float camber to front carb.
body
Adaptor, float camber to rear carb.
body
Needle & seat, standard
Needle & seat, viton point
Grose jet, improvement
Float, later type
Pin
Gasket
Lid, front float camber
Lid, rear float camber
Screw
Washer, spring
Coupling assembly
Bolt
Washer, plain
Nut
See tool catalogue(190.058), page carburettor
linkage & rods
27
Jaguar: Air filters, housing and accelerator linkage
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
108.619
108.620
108.621
016.222
108.590
016.858
108.330
108.622
173.119
108.623
108.624
172.910
108.327
108.328
28
QTY DESCRIPTION
2
1
1
2
1
2
1
1
1
1
1
4
1
1
Seal, air intake box to carburettors
Seal, top
Seal, bottom
Gasket
Air filter element, 240
Gasket
Rubber, connection
Drain tube set, except adaptors
Clip
Hose, from coupling inner wing to air silencer
Hose, air cleaner to coupling
Clamp
Air filter element, 3.4 & 3.8
Rubber, connection
ILL N° PART N° 15
16
17
18
19
20
21
22
23
24
25
26
27
108.329
161.796
164.006
108.289
108.589
108.625
108.134
108.051
108.137
027.425
108.150
171.084
101.957
QTY DESCRIPTION
1
1
1
1
1
1
1
2
1
1
1
1
1
Seal, air filter
Wing nut
Washer, spring
Air filter element, 340
Rubber, connection
Air hose
Rubber pad, accelerator pedal
Felt washer
Roller
Pedal rubber
Bearing
Spring, throttle return
Control rod assembly
©
V a n
G e s t e l
B & C
2 0 0 5
Daimler: Air filters, housing and accelerator linkage
Daimler
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
©
108.626
161.823
168.294
108.627
108.628
108.629
172.039
108.630
016.222
108.631
161.824
V a n
QTY DESCRIPTION
1
1
1
1
1
1
4
2
2
2
2
G e s t e l
Air filter element, up to Sept 1967
Wing nut
Washer, fibre
Gasket, air filter
LH breather hose
RH breather hose
Clamp
Seal, coupling
Gasket
Air filter element, Sept 1967 on
Wing nut
B & C
2 0 0 5
ILL N° PART N° 12
13
14
15
16
17
18
19
20
21
163.395
062.348
108.633
108.134
108.051
108.137
101.957
101.957
171.163
101.957
QTY DESCRIPTION
2
2
2
1
2
1
1
2
1
2
Washer, plain
Hose, air filter housing to pipe
Hose, pipe to rocker cover
Rubber pad, accelerator
Felt washer
Roller
Control rod assembly
Control rod assembly, need some modification
Throttle return spring
Control rod assembly, need some modification
29
Jaguar: Exhaust system
1 110.596 1
2 110.597 1
3 110.598 1
4 110.599 1
5 110.600 1
6 111.301 1
7 016.730 2
8 163.005 8
9 161.006 8
10 111.078 1
11 111.217 2
12 111.304 1
13 111.305 1
14 111.217 1
15 162.762 1
16 110.425 1
30
Exhaust system, 2.4, 1959-67, fixing material not included
Front pipe
Silencer
Tail pipe
Pollished pipe trim
Exhaust fitting kit
Exhaust sealing ring
Washer, plain
Nut
Clamp
Silencer mounting
Clamp
Bracket, mounting to body
Mounting, tail pipe
Screw set, 5/16 UNF, set of 10 screws, 10 nuts,
10 plain washers & 10 spring washers
Exhaust system, 3.4, 3.8 & 340, 1959-67, fixing material not included
ILL N° PART N° 17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
110.480
110.479
110.481
110.482
111.302
111.011
111.306
111.291
111.307
111.303
111.300
111.291
111.309
110.424
110.478
110.477
QTY DESCRIPTION
1
1
1
1
1
4
2
2
1
4
1
1
1
1
1
1
Front pipe LH
Front pipe RH
Twin silencer
Tail pipe
Exhaust fitting kit, Ill. No. 23, 25, 26 & 28 not included
Clamp
Bracket, mounting ring
Rubber mounting
Bracket, rubber mounting
Insulation washer
Bracket tail pipe
Rubber mounting
Bracket tail pipe, wheel arch side
Exhaust system 240, 1967-69, fixing material not included
Front pipe LH
Front pipe RH
©
V a n
G e s t e l
B & C
2 0 0 5
Daimler: Exhaust system
Daimler
1 110.427 1
2 110.493 1
3 110.494 1
4 110.495 1
5 110.496 2
6 110.497 1
7 110.498 1
8 110.499 2
9 111.310 1
©
V a n
G e s t e l
Exhaust system, fixing material and
heat shields not included
RH front pipe
LH front pipe
Balance pipe
Link pipe
RH rear section
LH rear section
Tail pipe
Exhaust fitting kit
B & C
2 0 0 5
APPLICATION
10 016.730 2
11 163.005 8
12 161.006 8
13 111.304 4
14 111.312 2
15 111.217 2
16 135.629 1
17 111.313 2
APPLICATION
Exhaust sealing ring
Washer, plain
Nut, brass
Clamp
Clamp, balance pipe
Mounting, silencer
UNF screw set, set of 160 pieces: for clamps, mountings and
40 screws, 40 nuts, 40 plain washers heat shields
& 40 spring washers
Mounting, rear silencer
31
Jaguar: Ignition system
Lumenition Optronic Ignition is an electric ignition conversion
kit principally for cars originally fitted with mechanical
distributors using contact points. The advantage of the
Lumenition system is that it contains no wearing parts,
requires no adjustment or maintenance during service and
once ignition timing is set it will remain permanently tuned.
The engine will start better, last longer and run more
economically through improved efficiency. There are only
three components, very compact and simple to fit.
Power module
086.082
086.462
185.743
086.081 Aluminium spacer block
Spark plug wire holder, made from solid aluminium ILL N° PART N° QTY DESCRIPTION
1 181.077 1
2 081.708 1
1 181.075 1
2 181.078 1
1 181.076 1
2 181.079 1
1 181.022 1
2 181.025 1
1 081.704 1
2 181.080 1
1 181.019 1
2 181.024 1
1 181.020 1
2 181.024 1
1 181.021 1
2 081.371 1
1 081.705 1
2 081.548 1
3 081.716 1
4 081.357 1
5 081.163 1
32
2.4 Distributor DMBZ6A LU 40557, 24-26°
Vacuum unit for above distributor
2.4 Dist. DMBZ6A LU 40528, 22°
2.4 Distributor 22D6 LU 40884,
240 Distributor 25D6 LU 41208,
10-12°
340 & 3.8 Distributor DMBZ6A
LU 40640, 17-19°
3.4 & 3.8 Distributor 22D6 LU 40885, 18-20°
3.4, 3.8 & 340 Distributor 22D6
LU 41063, 18-20°
3.4 & 340 Distributor 22D6 LU 41064, 10-13°
3.8 Distributor DMBZ6A LU 40665
Distributor cap for DMBZ6A
Distributor cap for 22D6, screw-on
Distributor cap for 22D6, push-on,
alternative to above
6 081.167 7
7 081.072 7
8 081.161 1
9 081.509 1
081.016 1
10 081.017 1
11 081.052 1
12 081.148 1
13 081.049 1
14 016.614 1
081.061 1
15 081.763 1
16 086.632 1
17 081.091 1
081.559 1
18 081.092 1
19 081.064 1
081.065 1
20 081.965 1
181.046 1
181.029 1
181.065 1
21 081.481 6
Replacement nut
Special washer
Rotor arm
Contact set, for DMBZ6A distr.
Contact set, for 22D6
Condensor
Earth lead
Terminal assembly, for DMBZ6A
Terminal & lead, for 22D6
Cork sealing ring, for DMBZ6A
‘O’ ring, rubber, 22D6
Screw kit for contact set, base plate & condensator, 22D6 only
Vacuum pipe, early models
Black nylon tubing
Copper tubing, 90cm
90° Rubber end piece
Straight rubber connection 1/8”
both ends
Straight rubber connection
1/8”-3/16”
H.T. lead kit with’Champion’ caps, screw-in
H.T. lead kit with’Champion’ caps, push-in
H.T. lead kit with modern end caps
H.T. lead kit COMPETITION, screw-in
‘Champion’ cap
22 080.223 1
080.224 1
23 081.674 1
24 081.960 1
25 081.951 3
081.950 2
26 081.949 1
27 081.990 1
28 181.030 1
29 081.561 1
30 012.058 6
012.389 6
31 081.194 1
32 081.001 1
081.195 1
33 081.534 A/R
34 081.502 1
35 081.535 1
36 181.007 1
37 181.031 1
©
Fitting kit for DMBZ distributors from
1961-’63
Fitting kit 22D6
from 1963-’71
V a n
5 m copper core ignition lead, black
5 m Competition copper core ignition lead, yellow with black tracer
Cable conduit
Black plastic cable sleeve
Thin cable separator
Thick cable seperator
Clip for cable separator
Cable grommet
Bracket, cable grommet
Cable indicator set, yellow & black print, not original, but practical
‘Champion’ Spark plug
NGK Spark plug
Ignition coil, screw-in
Ignition coil, push-in
Ignition coil, SPORT, push-in
Dust cover, end caps & coil
Brass connector, coil end
Brass staple
Ignition coil bracket
Extension bracket
G e s t e l
B & C
2 0 0 5
Daimler: Ignition system
Power module
086.082
Lumenition Optronic Ignition is an electric ignition conversion
kit principally for cars originally fitted with mechanical
distributors using contact points. The advantage of the
Lumenition system is that it contains no wearing parts,
requires no adjustment or maintenance during service and
once ignition timing is set it will remain permanently tuned.
The engine will start better, last longer and run more
economically through improved efficiency. There are only
three components, very compact and simple to fit.
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
©
181.081
181.082
181.041
181.042
181.044
181.043
081.341
081.064
081.065
081.091
081.559
081.092
181.083
081.481
V a n
088.276
Fitting kit for
distributors
Daimler
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
8
G e s t e l
Distributor 40676K-20.D8
Vacuum unit
Cap
Rotor arm
Contact set
Condensor
Vacuum pipe with a nipple on one end only
Straight rubber connection, 1/8” both ends
Straight rubber connection, 1/8”-3/16”
Black nylon tubing, not original
Copper tubing, 90cm
90° Rubber end piece
H.T. Lead kit
‘Champion’ cap
B & C
2 0 0 5
ILL N° PART N° 13 080.223
080.224
14
15 012.005
181.084
16 081.194
17 081.167
18 081.072
19 081.001
081.195
20 081.534
21 081.502
22 081.355
QTY DESCRIPTION
1
1
1
8
8
1
9
9
1
1
1
1
1
5 meter copper core ignition lead, black outside
5 meter Competition copper core ignition lead, yellow with black tracer
Cable indicator set, yellow & black print, not original, but practical
Spark plug ‘Champion’ N5
Spark plug extension
Ignition coil, screw-in
Replacement nut
Special washer
Ignition coil, push-in
Ignition coil, SPORT, push-in
Dust cover
Brass connector, coil end
Brass staple
33
Clutch system
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
021.119
021.091
021.120
021.002
162.525
164.006
021.131
021.132
162.022
164.002
021.085
021.092
021.120
021.151
021.152
027.425
027.490
027.479
171.161
021.191
053.478
34
QTY DESCRIPTION
1
1
1
2
6
6
1
1
6
6
1
1
1
1
1
1
1
2
1
1
1
Clutch cover, coil spring, 10”
Clutch plate
Release bearing
Retainer, release bearing
3/8”x 7/8”UNF screw
Washer, spring
Clutch kit, diaphragm type, 9.5”
Release bearing
5/16”x 7/8”UNF screw
Washer, spring
Clutch cover, coil spring, 9”
Clutch plate
Release bearing
Clutch cover, coil spring 9”
Clutch plate
Pedal rubber, JAGUAR
Pedal rubber, DAIMLER
Pedal bush
Pedal spring
Release bearing
Clutch master cylinder, incl. Ill. No.22
22 052.005 1
23 161.002 2
24 164.031 2
25 172.367 1
26 052.043 1
27 027.376 1
027.375 1
28 161.026 2
29 164.006 2
164.032 2
30 167.383 2
31 027.072 1
32 054.765 1
33 161.009 2
34 164.032 2
35 027.426 1
36 027.427 1
37 165.431 1
38 161.019 1
39 026.091 1
Filler cap
Nut
Washer, internal shakeproof
Clevis pin
Repair kit
Slave cylinder, ‘A’= 80mm
Slave cylinder, ‘A’= 97mm, all synchromesh gearbox
Nut
Washer, spring
Washer, shakeproof
Stud, slave cylinder mounting
Repair kit
Clutch hose
Nut
Washer shakeproof
Clutch lever
Shaft
Screw, securing fork to shaft
Lock nut
Cover timing aperature
40 027.430 1
41 027.429 1
42 173.075 1
43 171.119 1
44 163.365 1
45 024.669 1
46 016.733 1
47 174.138 1
48 162.667 6
49 027.309 1
50 027.310 1
51 027.491 1
52 200.846 1
©
V a n
Adjuster, need some adjusting
Pivot pin, need some adjusting
Clip, pivot pin securing
Return spring
Plate
Cover plate
Oil seal
Lock tab set, bellhousing to gearbox
Bolt
RH support bracket
LH support bracket
Bolting kit, clutch housing to engine block, also for Ill. No. 49, 50
Clutch aligning tool
G e s t e l
B & C
2 0 0 5
Moss gearbox, 3 synchro 4 speed, up to Sept. 1965
1 016.649 1
2 024.541 1
017.017 2
168.197 2
3 026.150 1
4 024.708 1
5 024.711 1
6 161.111 1
7 024.712 1
8 024.713 1
9 161.111 1
10 024.705 2
11 161.092 1
12 024.539 1
13 024.837 1
14 161.698 1
15 122.538 1
16 026.219 1
©
V a n
G e s t e l
Gasket set
Magnetic drain plug, or filler plug
at side
Standard plug
Washer, copper
Pair felt bushes, dipstick
Bush for pivot jaw
Double spring washer
Nut, slotted
Pin, selector lever
Bush
Nut, slotted
Flexible bushing, vertical
Nut, slotted
Gear change lever
Gear lever knob
Locking nut for knob
Gear lever gaiter
Ring, gaiter
B & C
2 0 0 5
ILL N° PART N° 17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
083.052
168.023
016.733
023.281
024.789
024.790
016.654
161.662
024.734
024.178
024.751
024.749
024.728
024.727
024.728
024.692
016.801
300.111
300.511
QTY DESCRIPTION
A/R
A/R
1
1
1
1
1
1
1
82
58
1
2
2
12
12
1
2
1
Switch, reverse light/overdrive
Gasket/shim, for switch adjustment
Oil seal
Bearing, front
Bearing, centre
Circlip, securing bearing
Oil seal, rear, only non O/D models
Nut, rear flange
Roller bearing, first motion shaft
Needle roller, 2nd & 3rd
Needle roller, laygear
Layshaft
Spring under plunger
Plugner
Spring
Ball
‘O’ring
1L gearbox oil 30
5L gearbox oil 30
35
‘A’ type overdrive
for Moss 3 synchro 4 speed gearbox, up to 1965
APPLICATION
O verdrive repair service:
We remanufacture your own unit, normally within two weeks. It is possible to have your overdrive
repaired to the original specification or to uprated competition spec. All overdrives are rig tested and
come with a six month warranty. Overdrive parts listed below are the most common but other parts
are available on request as well.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
020.252
020.253
020.254
016.499
025.447
025.386
081.281
025.371
025.372
172.927
025.375
025.214
025.388
025.216
025.387
025.163
025.404
025.379
025.403
025.378
025.402
36
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Rebuild overdrive 28/1369 2.4 models
Gasket and seal kit
Set of 8 clutch return springs 2.4/3.4 models
Set of 4 short and 8 long clutch return spring3.8 models
Solenoid assembly
Adaptor, not supplied with overdrive
Steel washer behind g/box rear bearing
Circlip 1.3/8”
Operating cam
Circlip 1.7/8”
Bearing
Circlip 90mm
Sliding member, exchange
Accumulator housing, 2.4/3.4
Accumulator housing, 3.8
Set of 6 accumulator piston rings 2.4/3.4
Set of 6 accumulator piston rings 3.8
Accumulator piston 2.4/3.4
Accumulator piston 3.8
ILL N° PART N° 16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
025.452
025.444
025.406
025.409
025.381
025.405
025.391
025.369
025.069
025.448
041.632
025.125
025.126
161.303
025.390
025.170
025.167
025.042
025.168
025.179
025.450
025.451
023.027
025.182
025.107
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
Accumulator pressure spring
Accumulator pressure spring
Accumulator pressure spring, small
Accumulator pressure spring, large
Accumulator tube
Accumulator tube
Planetary carrier assembly
Complete UDC assembly
Bronze thrust washer
Annulus
Bearing, annulus
Bearing, rear
Oil seal
Nut
Sun gear
Filter
Plunger, oil pump
Spring
Body, oil pump
Operating piston
Speedo meter drive pinion
Bush
Ball
Spring
Ball
©
V a n
APPLICATION
2.4
3.4
3.8
3.8
2.4/3.4
3.8
G e s t e l
B & C
2 0 0 5
All synchro gearbox, Sept. 1965 on
1 016.860 1
2 024.541 1
017.017 1
3 017.017 1
4 168.230 1
5 024.708 1
6 024.711 1
7 161.079 1
8 026.160 1
9 024.713 1
10 161.079 1
11 026.094 1
12 161.661 1
13 026.157 1
14 026.095 1
15 026.096 1
16 161.012 1
17 122.538 1
18 026.219 1
19 083.052 A/R
20 168.023 A/R
21 016.733 1
22 026.092 1
23 026.169 1
24 026.170 1
25 024.789 1
©
V a n
G e s t e l
Gasket set
Magnetic drain plug & washer
Drain plug + use 168.230 washer, fibre
Filler plug
Washer, plug
Bush for pivot jaw
Double spring
Locking nut
Pivot pin
Bush, horizontal
Locking nut, pivot pin
Gear lever knob
Chrome locking cone, nut
Washer, upper
Bush, upper
Bush, lower
Nut, nyloc
Gear lever gaiter
Ring, gaiter
Switch, reverse/o/d
Washer, adjusting
Oil seal, front
Bearing, front
Circlip, bearing
Collar between bearing circlip & Casing
Bearing, mainshaft
B & C
2 0 0 5
ILL N° PART N° 26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
024.790
162.022
164.002
162.577
041.632
016.735
016.050
016.801
026.101
026.184
026.183
026.185
026.107
026.113
026.182
026.114
026.182
026.114
026.102
026.181
026.180
026.104
026.105
026.241
024.833
026.103
026.179
026.178
026.117
QTY DESCRIPTION
1
7
7
7
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
2
2
6
6
6
6
6
1
1
1
Circlip for bearing
Screw, O/D adaptor plate to casing
Washer, spring
Screw, rear casing
Bearing, rear
Oil seal, rear
Oil seal
‘O’ ring
Gauze filter
First motion shaft, standard ratio
First motion shaft, close ratio
First motion shaft, KC & KCN g/box
Roller bearing, first motion shaft
Oil thrower
Nut, first motion shaft
Tab washer for nut
Nut, 3rd gear and 3rd-4th synchro hub
Tab washer
Synchro ring
Operating sleeve, last type, KC & KCN
Synchro hub, last type, KC & KCN
Thrust member
Plunger
Spring
Ball
Spring
Third gear, standard
Third gear, close ratio
Third gear, KC & KCN g/box
51 026.106 120
52 026.177 1
026.115 1
53 026.176 1
54 026.174 1
026.175 1
55 026.173 1
56 026.187 1
026.186 1
026.188 1
57 026.108 1
58 172.880 1
59 024.751 58
60 026.110 1
61 024.755 1
62 024.759 1
024.756 1
024.757 1
024.758 1
024.760 1
63 162.072 1
64 168.234 1
65 026.240 1
66 174.166 1
67 161.662 1
68 300.111 2
300.511 1
69 024.539 1
Needle roller, 1st, 2nd & 3rd gear
Second gear, early gearboxes
Second gear, KC & KCN g/box
Sleeve, bearing
First gear
First gear, KC & KCN g/box
Reverse gear
Lay gear, standard ratio
Lay gear, close ratio
Lay gear, KC & KCN g/box
Lay shaft
Key, locking lay shaft in g/box case
Needle roller
Thrust washer, rear
Inner thrust washer
Outer thrust washer, 0.152”
Screw
Washer, fibre
Nut, securing main shaft in bearing, O/D gearbox only
Tab washer
Nut, flange to shaft
1L gearbox oil 30
5L gearbox oil 30
Gear change lever
37
Overdrive for all synchro gearbox, Sept. 1965 on
APPLICATION
Overdrive repair service:
We remanufacture your own unit, normally within two weeks. It is possible to have your overdrive
repaired to the original specification or to uprated competition spec. All overdrives are rig tested and
come with a six month warranty. Overdrive parts listed below are the most common but other parts
are available on request as well
1
2
3
4
5
6
7
8
9
10
11
12
13
020.255
020.256
020.257
016.843
081.047
025.453
025.159
025.388
025.214
025.455
172.231
025.454
025.457
025.458
025.068
38
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Rebuild overdrive 28/61740
Rebuild overdrive, 240 models
Rebuild overdrive 28/61743
Gasket and seal kit
Solenoid assembly
Set of 6 clutch return
Sliding member
Bearing
Circlip 1.7/8”
Corrugated washer
Snap ring
Plate, retaining thrust ring
Sun gear
Planetary carrier assembly
Annulus oil thrower
Daimler
ILL N° PART N° 14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
025.395
025.069
025.124
025.125
025.126
161.303
163.348
025.160
025.451
025.105
161.019
174.016
025.468
025.463
025.042
166.134
025.406
168.289
023.027
025.011
025.182
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
2
4
4
1
1
1
1
1
1
1
1
1
APPLICATION
Complete UDC assembly
Bronze thrust washer
Bearing annulus
Bearing rear
Oil seal
Nut
Washer
‘O’ring
Bush, pinion
‘O’ring, operating piston
Nut
Tab washer
Washer
Plunger, oil pump
Spring
Screw, securing oil pump body
Accumulator piston spring
Washer
Ball
Plunger
Spring
©
V a n
G e s t e l
B & C
2 0 0 5
Automatic gearbox and propshafts
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
©
016.738
016.221
016.892
023.012
088.277
088.278
025.471
108.591
032.193
165.429
161.278
032.392
032.193
033.100
V a n
QTY DESCRIPTION
1
1
1
1
1
1
1
1
2
4
4
1
2
1
G e s t e l
Oil seal, front, DG type
Oil seal, front, 35 type
Oil seal, rear, DG type
Oil seal, rear, 35 type
Inhibitor switch for DG type
Inhibitor switch for 35 Type
Control cable
Kick-down cable
Universal joint, ‘A’=75mm
‘D’ head bolt
Castel nut
Flange
Steel ring
B & C
2 0 0 5
ILL N° PART N° 12
13
14
15
16
17
18
19
20
21
22
23
24
25
033.098
033.099
162.463
161.025
032.193
041.066
032.966
033.124
172.886
162.463
161.025
162.463
161.025
300.137
QTY DESCRIPTION
1
2
8
8
3
1
1
2
2
8
8
4
4
8
Gaiter
Rubber ring
Bolt
Nut, nyloc
Grease nipple
Bearing, propshaft support
Dust shield
Key
Bolt
Nut, nyloc
Bolt, flange to flange
Nut, nyloc
Automatic oil type F
39
Rear axle
1 033.103 1
033.104 1
033.125 1
033.126 1
2 032.826 1
3 032.827 A/R
032.828 A/R
032.829 A/R
4 032.878 1
5 032.831 A/R
032.832 A/R
032.833 A/R
032.834 A/R
6 032.835 1
7 032.871 1
8 032.838 1
9 032.837 1
033.107 1
10 033.106 1
11 163.348 1
12 161.705 1
13 030.195 1
14 032.842 2
15 032.843 2
16 032.845 2
17 032.846 1
18 030.196 1
19 033.108 2
20 033.109 2
21 032.900 4
22 032.901 2
23 032.895 4
40
Crown wheel and pinion, 3.3:1
Bearing, pinion inner
Shim, inner, 0.003”
Distance piece
Bearing, pinion outer
Oil thrower, 4HA type
Gasket, oil seal
Oil seal, for use with original flange
Oil seal, for aftermarket flange
Flange, aftermarket type
Washer
Nut
Complete planet assembly, not suitable for 3.77:1 crown wheel and pinion
Differential wheel
Thrust washer
Thrust washer for pinion gear
Shaft, pinion gear
Complete planet assembly, LIMITED slip, suitable for all crown wheel
and pinion ratios
Differential wheel
Ring for differential wheel
Pinion mate gear
Pinion mate gear shaft
Flat final drive friction plate
ILL N° PART N° 24
25
26
27
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
032.896
032.897
016.658
081.026
164.002
032.816
165.652
174.127
032.818
033.127
032.819
032.820
032.821
032.822
030.197
173.115
041.887
041.904
161.147
033.128
033.129
033.130
162.072
161.025
167.323
161.664
032.114
032.115
165.442
161.044
300.116
300.516
QTY DESCRIPTION
2
2
1
10
10
2
10
5
2
2
A/R
A/R A/R
A/R 2
2
2
2
2
2
2
2
8
8
10
10
1
1
10
10
1
1
Dished final drive friction plate
Final drive friction disc
Gasket
Screw, 5/16”UNC
Washer, spring
Drain or filler plug
Screw, crown wheel to case
Lock plate
Bearing, differential, for 4HA axle
Bearing, differential, for 3HA axle
Shim, 0.003”, 4HA axle only
Shaft
Key
Bearing and oil seal kit
Bearing only
Castle nut
Oil seal
Gasket
Hub, oil seal
Screw
Nut, nylock
Stud
Wheel nut, disc wheel cars
RH wire wheel hub
LH wire wheel hub
Bolt, brake disc to hub
Nut
1L mild EP oil, for rear axle
5L mild EP oil, for rear axle
©
V a n
G e s t e l
B & C
2 0 0 5
Rear suspension
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
©
045.146
041.892
048.005
041.377
048.028
166.206
161.079
044.011
162.022
163.001
161.012
041.891
161.025
042.842
045.159
045.315
V a n
QTY DESCRIPTION
2
4
4
2
2
2
2
4
8
8
8
2
2
2
2
2
G e s t e l
Rear spring, incl Ill. No.3
Rubber pad, standard, spring mounting
Polyurethane pad, spring mounting
Bush, standard
Polyurethane bush
Bolt, spring to axle case
Nut, nyloc
Clamp plate
Screw
Washer, plain
Nut, nylock
Pad, spring mounting
Nut, nylock
Koni rear shock absorber
Monroe, gas, rear shock absorber
Spax rear shock absorber
B & C
2 0 0 5
ILL N° PART N° 13
14
15
16
17
18
19
20
21
22
23
041.889
048.112
162.276
163.009
161.079
134.875
041.890
048.172
041.717
041.719
041.720
161.017
186.034
QTY DESCRIPTION
4
4
4
4
4
1
4
4
2
4
4
2
1
Bush, radius arm, standard
Polyurethane bush
Bolt
Washer, plain
Nut, nylock
Complete panhard rod assembly
Bush, rubber, standard
Polyurethane bush
Distance tube
Washer, outer
Washer, inner
Nut, nylock
Copper grease, high temperature
41
Front suspension
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
041.121
041.895
041.909
041.706
041.710
161.670
044.004
044.003
045.158
041.194
161.818
041.736
041.737
041.738
166.135
166.136
164.006
161.337
044.005
162.056
164.006
041.897
162.005
161.330
041.782
041.905
041.711
161.297
045.008
045.009
166.124
048.006
041.066
174.136
041.194
161.815
041.736
045.136
161.150
041.886
041.818
048.010
042.184
042.185
42
QTY DESCRIPTION
ILL N° PART N° 1
4
4
4
4
4
A/R
A/R
2
2
2
2
A/R
A/R
2
2
4
4
2
4
4
2
4
4
4
4
4
4
2
2
8
2
2
4
2
2
2
2
2
2
2
2
1
1
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
Split pin kit
Bush, standard, upper wishbone
Polyurethane bush, upper wishbone
Washer, distance
Washer, special, under nut
Nut, castle
Shim, camber angle, 0.064”
Shim, camber angle, 0.048”
Upper ball joint assembly
Gaiter rubber
Nut, nylock 1/2”UNF
Washer, plain
Shim, caster angle, 0.064”
Shim, caster angle, 0.036”
Bolt, short
Bolt, long
Washer, spring
Nut, nylock
Upper bump stop rubber, to ‘A’
Screw
Washer, spring
Lower bump stop rubber
Screw
Nut, nylock
Bush, standard, lower wishbone
Polyurethane bush, lower wishbone
Washer
Nut, castle
Lower ball joint kit, original type
Lower ball joint kit, aftermarket
Screw, ball joint to carrier, for 045.008
Cap, lower ball joint
Grease nipple
Tab washer
Gaiter rubber
Nut, nylock
Washer, plain
Stub axle
Nut, castle
Bearing kit
Oil seal
Shield, water, later models
RH front hub
LH front hub
041.066
048.015
186.034
041.786
162.525
161.025
164.006
041.785
164.006
161.025
162.676
161.025
045.144
045.145
165.476
162.105
164.006
044.008
044.009
042.341
045.160
045.314
165.432
163.009
161.079
162.020
174.167
041.896
041.913
041.914
139.478
041.756
162.961
164.006
162.667
045.039
161.079
041.835
044.010
041.836
161.025
200.604
186.021
QTY DESCRIPTION
2
2
1
2
4
4
4
2
4
4
2
2
2
2
10
2
12
A/R
A/R
2
2
2
2
2
2
8
2
2
2
2
2
2
4
4
2
2
2
4
2
4
2
1
1
Grease nipple
Water thrower
Copper grease, special for wire wheel hubs & spinners
Mounting, front
Screw
Nut, nylock
Washer, spring
Mounting, rear
Washer, spring
Nut, nylock
Bolt, mounting to body
Nut, nylock
Front spring, 3.4 & 3.8
Front spring, 2.4
Screw, long, spring seat
Screw, short
Washer, spring
Packing ring, ¼” thick
Packing ring, 1/8” thick
Koni front shock absorber
Monroe, gas, front shock absorber
Spax front shock absorber
Bolt
Washer, plain
Nut, nylock
Screw, bracket to seat pan
Tab washer
Mounting bush, standard, anti-roll bar
Polyurethane bush, 5/8” anti-roll bar
Polyurethane bush, 11/16” anti-roll bar
Plate, mounting
Saddle bracket
Screw
Washer, spring
Bolt
Bush
Nut, nylock
Bush, rubber
Spacer
Retaining washer
Nut, nylock
Grease pump
Grease cartridge, Castrol
©
V a n
G e s t e l
B & C
2 0 0 5
Steering
1 043.819 1
2 041.739 4
3 043.029 4
041.817 4
4 161.017 4
163.379 4
5 041.900 2
6 161.017 2
7 163.379 2
8 043.900 1
043.902 1
9 043.901 1
043.903 1
10 043.596 2
162.128 2
163.001 2
164.002 2
161.002 2
11 043.904 1
043.
1
12 043.905 1
043.906 1
043.907 1
043.920 1
13 043.908 1
14 043.909 1
15 043.910 1
16 161.815 1
17 174.168 1
18 166.139 1
19 043.911 1
20 043.912 1
21 043.913 1
22 043.914 1
23 043.915 1
24 043.916 1
25 043.917 A/R
26 043.918 1
27 043.919 A/R
28 166.140 3
29 166.141 1
30 164.021 4
©
V a n
G e s t e l
APPLICATION
Pair tie rods
Grease nipple
Boot rubber
Clip, securing boot rubber
Nut, nylock
Washer, plain
Pin and bush assembly
Nut, nylock
Washer, plain
RH centre rod end assembly, with fixed Ill. No. 5Non power steering
RH centre rod end assembly, with fixed Ill. No. 5Power steering
LH centre rod end assembly, with fixed Ill. No. 5 Non power steering
LH centre rod end assembly, with fixed Ill. No. 5 Power steering
Clamp, securing tube to rod ends
Bolt
Washer, plain
Washer, spring
Nut
RHD steering box Non power steering
LHD steering box, ask your local salesman
Seal kit, Burman steering box Power steering
Seal kit, external, Adwest steering box Power steering
Seal kit, internal, Adwest steering box Power steering
Seal kit for oil pump, fitted on engine Power steering
Top cover, Adwest steering box
Bleed screw, Adwest steering box
Selector shaft and worm assembly,
Adwest steering box
Nut, drop arm, Adwest steering box
Tab washer, Adwest steering box
Screw, sealing valve adjusting hole,
Adwest steering box
Piston and rack, Adwest steering box
End plate, Adwest steering box
Clip, securing end plate
Adjusting plug, Adwest steering box
Thrust pad, Adwest steering box
Bearing, top, Adwest steering box
Shim 0.010”, Adwest steering box
Bearing, bottom
Shim 0.010”, Adwest steering box
Screw, short, Adwest steering box
Screw, long, Adwest steering box
Washer, spring
B & C
2 0 0 5
31 300.112 1
300.137 3
32 043.922 1
33 161.045 1
34 043.923 1
35 043.924 1
36 043.925 1
37 043.926 1
38 043.927 1
39 043.928 1
40 161.079 1
41 043.929 1
42 043.895 1
43 043.026 2/1
44 162.081 2
162.128 2
45 164.002 2
46 161.002 2
161.021 2
47 043.932 1
48 043.931 2
49 043.933 1
50 043.934 1
51 043.935 2
52 043.936 1
53 043.937 1
54 043.892 1
55 043.938 1
56 043.939 1
57 161.666 1
58 163.381 1
59 043.940 1
043.941 1
60 043.943 1
61 043.944 1
62 142.256 1
63 139.595 1
64 171.153 2
139.596 1
65 043.680 2
088.260 2
66 049.065 1
APPLICATION
Steering box oil, non power steering
Steering box oil, power steering
Idler spindle, later type
Nut
Bearing, top
Bearing, bottom
Seal, felt
Retainer for seal
Washer
Abutment ring
Nut, nylock
Flexible coupling
Rubber steady bush
Universal joint, early models use 2
Bolt 5/16”UNF x 1 ¾”
Bolt 5/16”UNF x 1 3/8”
Washer, spring
Nut, for 161.081
Nut, nylock, for 162.128
Gaiter
Nylon roller
Bush, upper, felt, early column
Bush, lower, felt, early column
Spring clip, securing bush
Elastollan bush, upper, late column
Elastollan bush, lower, late column
Large lock nut for telescopic adjustment
Split collet
Circlip
Nut, steering wheel
Special washer
Thrust bearing, retaining inner column,
0.312”/0.314”
Thrust bearing, retaining inner column,
0.314”/0.316”
Retaining ring for thrust bearing
Spring clip, securing retaining ring
Horn ring, not for very early models
Horn ring cover
Spring, horn ring cover
Contact plate in horn push
Contact holder, for horn slip ring
Rubber sleeve, for horn slip ring
Medallion
43
Wheels and spinners
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
046.029
046.031
046.028
046.030
042.184
042.185
032.114
032.115
042.211
042.212
042.213
042.214
185.704
042.221
042.218
042.219
042.220
042.221
042.097
200.674
186.034
187.012
185.050
169.043
169.044
169.047
169.048
169.041
169.042
169.045
169.046
169.002
169.001
141.927
141.928
44
QTY DESCRIPTION
ILL N° PART N° 5
5
5
5
1
1
1
1
2
2
2
2
1
2
2
2
2
1
1
1
1
1
1
A/R
A/R
A/R
A/R A/R
A/R A/R
A/R
A/R
A/R
4
4
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Wire wheel, chrome plated, 5 x 15” curly hub type, 72 spokes
Wire wheel, chrome plated, 5 x 15” easy clean hub type, 72 spokes
Wire wheel, painted silver, 5 x 15” curly hub type, 72 spokes
Wire wheel, painted silver, 5 x 15” easy clean hub type
RH front hub
LH front hub
RH rear hub
LH rear hub
RH spinner, 2 eared, ‘Jaguar’
LH spinner, 2 eared, ‘Jaguar’
RH spinner, 2 eared, ‘Daimler’
LH spinner, 2 eared, ‘Daimler’
52mm Spinner remover
RH federal, ‘Jaguar’
LH federal, ‘Jaguar’
RH federal, ‘Daimler’
LH federal, ‘Daimler’
Remover tool for federal spinners
Hammer, copper/rawhide 1.15 kgr
Spoke spanner
High temp. copper grease
Silicone spray, use on clean & dry wheels
Cleaning brush
Short spoke & nipple for 046.029
Long spoke & nipple for 046.029
Nipple, chrome plated
Nipple, bare metal
Hub cap, ‘Jaguar’, 2.4/3.4 & 3.8 models
Badge, ‘Jaguar’
QTY DESCRIPTION
140.523 4
142.222 4
085.444 4
172.021 8
133.140 1
161.664 20
047.071 5
047.005 5
161.476 5
132.526 1
047.
5
200.889 1
159.485 1
200.604 1
186.021 1
200.
1
200.884 1
200.876 1
200.885 1
200.877 1
200.840 1
200.702 1
200.874 1
200.842 1
200.836 1
200.675 1
200.883 1
200.834 1
200.623 1
200.849 1
200.841 1
200.630 1
200.838 1
200.878 1
200.879 1
Rim, wheel, chrome
Hub cap, ‘Jaguar’, 240 & 340 models
Badge, ‘Jaguar’
Clip, badge, 240 & 340 models
Hub cap remover
Wheel nut
Protection rim
15”tyre tube
Stainless steel vale cap
Tyre pump
Please call for more information
Jack
Leather strap to secure jack
Grease pump
Greasse cartridge, Castrol
Tool box, WITHOUT tools, ask for more details
Open end spanner, ¾ x 7/8”
Open end spanner, 9/16 x 5/8”
Open end spanner, ½ x 7/16”
Open end spanner, 11/32 x 3/8”
Adjustable spanner
Tyre pressure gauge
Tyre pressure gauge
Feeler gauge
Ratchet lever, for jack
Grease gun
Box spanner, spark plug/cylinder head nuts
Screw driver
Tommy bar, for box spanner
Pliers
Screw driver, for adjustment of distributor points
Extractor, for tyre valve
Cam setting tool
Tin with bleeder tube, Dunlop, up to 1967
Tin with bleeder tube, Girling, 1967 on
©
V a n
G e s t e l
B & C
2 0 0 5
Master brake cylinder, brake pipes and servo
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
©
053.241
167.382
161.001
164.031
052.837
052.269
053.039
053.018
027.425
027.490
027.479
171.161
172.367
053.511
053.539
054.805
173.116
050.302
053.082
052.765
053.084
054.843
173.108
V a n
QTY DESCRIPTION
1
2
2
2
1
1
1
1
1
2
2
1
1
1
1
1
1
1
1
1
1
1
2
G e s t e l
Brake master cylinder, aftermarket
Stud
Nut
Washer shakeproof
Repair kit for aftermaket master cylinder
Repair kit for original brake master cylinder
1L brake fluid DOT 4
1L brake fluid SILICONE
Pedal rubber, JAGUAR
Pedal rubber, DAIMLER
Pedal bush
Pedal spring
Clevis pin
Brake fluid reservoir
Cap
Hose
Clip, fluid reservoir
Rebuild servo 5”, Girling
Replacement servo, Lockheed
Repair kit, fluid side only, Girling servo
Repair kit, complete, Lockheed servo
Hose, from servo to breather
Clip
B & C
2 0 0 5
19 050.520 1
20 139.629 1
21 052.771 1
22 054.844 1
054.845 1
23 173.107 6
24 054.731 2
054.732 1
25 054.793 2
054.794 1
26 161.013 3
27 164.034 3
28 052.776 1
29 052.780 1
30 168.014 1
31 084.004 1
32 054.862 1
054.863 1
054.864 1
054.865 1
33 052.117 1
34 122.390 2
Reservac tank
Stone guard
Check valve
Hose, check valve to servo
Hose, check valve to inlet manifold
Clip
Front brake hose
Rear brake hose
Front brake hose, braided stainless steel
Rear brake hose, braided stainless
steel
Nut, locking
Washer shakeproof
5 Way piece.
3 Way piece, fits on rear axle
Washer, copper, fits between rear brake hose and 3 way piece
Brake light switch
Brake pipe set, MK2, up to 1966
Brake pipe set, MK2 & 240, 1966 on
Brake pipe set, MK2 3.4 & 3.8, up to 1966
Brake pipe set, MK2 3.4 & 3.8, 1966 on
Rubber grease
Grommet, brake pipe
45
Brake parts, front and rear
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
050.362
050.365
165.442
161.044
053.093
052.270
053.095
053.495
052.576
041.722
052.669
052.670
162.515
164.007
161.019
165.446
165.445
052.654
053.094
052.271
053.095
053.495
052.576
041.722
052.669
052.670
162.515
164.007
161.019
165.448
052.654
052.720
052.937
46
QTY DESCRIPTION
ILL N° PART N° 2
2
20
20
4
1
1
1
1
2
4
2
2
2
2
2
2
A/R
4
1
1
1
1
2
4
2
2
2
2
4
A/R
2
2
27
28 29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Front disc
Rear disc
Bolt, disc to hub, use 5 for each disc
Nut
Front piston & cylinder, 2 1/8”, 53.91mm
Seal kit for two front callipers
Brake pad set, 4 pieces, standard quality
Brake pad set, 4 pieces, Green stuff
Bolts & washer set, 16 bolts & 16 washers
Bleed screw & ball
Support plate, brake pads
Retaining plate, brake pads
Screw
Washer, shakeproof
Nut
Bolt, calliper to stub carrier
Bolt, calliper/steering arm to stub carrier
Shim .020”
Rear piston & cylinder, 1 ½”, 38.1mm
Seal kit for two rear callipers
Brake pad set, 4 pieces, standard quality
Brake pad set, 4 pieces, Green stuff
Bolt & washer set, 16 bolts & 16 washers
Bleed screw & ball
Support plate, brake pads
Retaining plate, brake pads
Screw
Washer, shakeproof
Nut
Bolt, calliper to adaptor plate
Shim .020”
Retraction plate, for early non automatic adjustable handbrake
Retraction plate, for automatic adjustable handbrake
052.721
052.938
165.440
053.510
050.518
050.519
166.130
052.912
052.911
052.906
052.902
052.908
052.909
052.903
052.910
052.902
052.907
052.904
165.451
054.846
054.847
166.143
163.007
161.047
054.848
161.019
054.849
054.850
172.045
163.001
086.917
122.540
054.605
QTY DESCRIPTION
2
2
4
1
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
1
2
2
2
2
1
1
1
1
5
5
1
1
4
Lock plate, for 052.720
Lock plate, for 052.937
Bolt, handbrake mechanism to calliper
Handbrake pads, set of 4
R/H handbrake assembly, automatic adjustable type
L/H handbrake assembly, automatic adjustable type
Two bolts & washer kit
Outside protection cover
Inside protection cover
Tension spring, pawl
Pawl
Ratchet
Friction spring
Return spring
Hinge pin
Lever, operation
Anchor pin
Anchor pin for return spring
Bolt, handbrake adjusting
Handbrake cable
Guide, nylon
Screw
Washer, plain
Nut, nylock
Fork end
Nut, locking
RH handbrake (axle) cable, automatic adjustment type
LH handbrake (axle) cable, automatic adjustment type
Clevis pin
Washer, plain
Handbrake warning light switch
Blanking plug
Bridge pipe
©
V a n
G e s t e l
B & C
2 0 0 5
Wiring loom, battery and electrical connectors
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
©
080.523
080.524
080.538
080.541
080.542
083.178
083.179
080.009
083.174
086.782
080.299
080.133
080.134
083.653
083.652
083.651
082.022
082.196
139.497
121.824
165.479
062.005
121.821
083.041
083.042
083.043
083.044
083.180
083.115
084.132
083.181
083.185
083.996
083.997
083.998
V a n
QTY DESCRIPTION
ILL N° PART N° 1
1
1
1
1
1
1
1
1
1
A/R
1
1
A/R
A/R
A/R
1
1
1
1
2
1
1
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
26
27
28
29
G e s t e l
Wiring loom, 2.4, 3.4 & 3.8, manual gearbox cars
Wiring loom, 2.4, 3.4 & 3.8, automatic gearbox cars
Wiring loom, 240 & 340, manual gearbox cars
Cable, battery to starter
Cable, battery to body, + to ground
Battery terminal clamp, - pole
Battery terminal clamp, + pole
Earth cable
Battery switch
Battery switch, F.I.A. approved
1 Meter black battery cable
5 Meter black battery cable
1 Meter earth cable
Heat shrink tubing, 9.5mm ID x 32 mm long
Straight terminal
Flag terminal
Battery
Cover, battery
Clamp
Rubber strap
Bolt
Tube, drain
Grommet kit, see for individually grommets our tool catalogue
Single snap connector
Double snap connector
Triple snap connector
Sleeve type bullet terminal
Solder type bullet terminal
Bulb holder with earth wire
Bulb holder without earth wire
Female terminal, 6.3mm blade
Female terminal, 9.5mm blade
Eyelet terminal 3/16” hole
B & C
2 0 0 5
083.182
083.186
172.250
084.123
084.122
172.020
172.073
172.140
172.019
172.141
172.143
172.075
172.148
172.151
172.154
172.063
172.041
172.053
172.142
172.144
172.146
172.149
172.152
172.155
172.042
172.055
172.010
172.038
172.145
172.025
172.150
172.153
172.156
172.127
172.182
QTY DESCRIPTION
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
A/R
Insulation for 083.181 or 083.187
Insulation for 083.185
Earth terminal
Bulb, instrument, 2.2W
Bulb, instrument, 2.2W bayonet
A = 3/16” = 4.7mm, B = 1/8” = 3.9mm
A = 3/16” = 4.7mm, B = 3/16” = 4.7mm
A = 3/16” = 4.7mm, B = 1/4” = 6.35mm
A = 3/16” = 4.7mm, B = 5/16” = 7.93mm
A = 3/16” = 4.7mm, B = 3/8” = 9.52mm
A = 3/16” = 4.7mm, B = 7/16” = 11.1mm
A = 3/16” = 4.7mm, B = 1/2” = 12.7mm
A = 3/16” = 4.7mm, B = 5/8” = 15.9mm
A = 3/16” = 4.7mm, B = 3/4” = 19.0mm
A = 3/16” = 4.7mm, B = 7/8” = 22.2mm
A = 1/4” = 6.35mm, B = 3/16” = 4.7mm
A = 1/4” = 6.35mm, B = 1/4” = 6.35mm
A = 1/4” = 6.35mm, B = 5/16” = 7.93mm
A = 1/4” = 6.35mm, B = 3/8” = 9.52mm
A = 1/4” = 6.35mm, B = 7/16” = 11.1mm
A = 1/4” = 6.35mm, B = 1/2” = 12.7mm
A = 1/4” = 6.35mm, B = 5/8” = 15.9mm
A = 1/4” = 6.35mm, B = 3/4” = 19.0mm
A = 1/4” = 6.35mm, B = 7/8” = 22.2mm
A = 5/16” = 7.9mm, B = 3/16” = 4.7mm
A = 5/16” = 7.9mm, B = 1/4” = 6.35mm
A = 5/16” = 7.9mm, B = 5/16” = 7.93mm
A = 5/16” = 7.9mm, B = 3/8” = 9.52mm
A = 5/16” = 7.9mm, B = 7/16” = 11.1mm
A = 5/16” = 7.9mm, B = 1/2” = 12.7mm
A = 5/16” = 7.9mm, B = 5/8” = 15.9mm
A = 5/16” = 7.9mm, B = 3/4” = 19.0mm
A = 5/16” = 7.9mm, B = 7/8” = 22.2mm
A = 3/8” = 9.32mm, B = 3/16” = 4.7mm
A = 3/8” = 9.32mm, B = 5/16” = 7.93mm
47
Starter, dynamo and electrical components
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
082.090
082.089
082.128
082.089
081.075
081.197
081.198
161.772
082.156
082.079
082.180
082.080
082.182
082.182
082.173
081.586
081.182
181.037
181.003
181.028
061.554
061.514
061.555
061.513
061.513
061.578
083.119
122.013
084.003
48
QTY DESCRIPTION
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
Starter motor, 3.4 & 3.8 manual models
Starter motor, 2.4 manual models
Starter motor, all automatic models
Starter motor, Daimler V8
Brush set
Bush, drive end
Bush, rear end
Nut, brass
Starter motor, modern type, not for Daimler
Dynamo C45, Non power steering, early 2.4, 3.4 & 3.8
Dynamo C45, Power steering, early 2.4, 3.4 & 3.8
Dynamo C42, Non power steering, later 2.4, 3.4, 3.8 & 240, 340 models
Dynamo C42, Power steering, later 2.4, 3.4 & 240, 340 models
Dynamo, Daimler V8
Alternator, Daimler V8 250
Brush set, for C45 dynamo
Brush set, for C42 dynamo
Dynamo mounting kit
Pulley, duplex
Fan
Fan belt, single, 2.4 early models
Fan belt. Single, 3.4 & 3.8 early models
Fan belt, double, 2.4 late models & 240 models
Fan belt double, 3.4, 3.8 late models & 340
Fan belt double, Daimler V8 with dynamo
Fan belt, Daimler V8 with alternator
Starter solenoid
Boot, plastic
Boot, rubber
ILL N° PART N° 15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
082.140
082.094
082.129
084.006
084.005
083.162
084.047
086.193
084.048
086.194
084.011
083.079
088.031
083.091
086.935
088.148
086.996
083.120
083.052
084.004
084.010
083.080
122.462
086.887
086.996
086.624
088.277
088.278
161.722
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Control box, 310 type, early type
Control box, RB340 type for C45 dynamo, 30amp
Control box, RB340 type for C42 dynamo, 25amp
Fuse box
Five piece fuse set, 35amp
Five piece fuse set, 50amp
Horn, low note, wind tone type
Horn, low note, late type
Horn, high note, wind tone type
Horn, high note, late type
Flasher box, screw type, fits behind the central dash
Flasher box push-on type, fits behind the central dash
Oil pressure switch
Voltage stabiliser, instruments
Door switch
Water temperature sender
Handbrake switch
Horn relays, also for fog or spot lamps
Reverse light switch
Brake light switch
Headlamp dipper switch, early
Headlamp dipper switch, 240, 340 models
Rubber cap, for 084.011
Rubber cap, for 083.080
Choke warning lamp switch, 2.4, 240 models
Rev. counter generator, fits on the engine
Inhibitor switch, for DG type automatic gearbox
Inhibitor switch, for 35 type automatic gearbox
Knurled nut, fuse box cover
©
V a n
G e s t e l
B & C
2 0 0 5
Windscreen wiper and washer system
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
©
087.102
087.003
088.195
083.021
088.216
082.183
083.197
083.025
083.024
122.015
083.781
083.989
V a n
QTY DESCRIPTION
2
2
2
2
1
1
1
1
1
1
1
1
G e s t e l
Wiper blade 12”
Wiper arm
Kit chrome nut, bezel & rubber washer
Nut, chrome
Bezel, chrome
Two speed wiper motor, need some small rewiring
Pair brushes
Casing and nut, cut to length
Rack
Grommet
Washer bottle, pump & bracket
Bracket
B & C
2 0 0 5
ILL N° PART N° 13
14
15
16
17
18
19
20
21
22
23
083.987
085.165
083.988
083.055
086.617
083.056
083.054
086.832
133.703
083.613
083.761
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
Bottle only
Lable, ‘Lucas’
Filler plug
Tubing kit
Pair washer jets
‘T’ piece
Non return vale
Plastic washer bottle, pump & bracket
Bracket
Plastic reservoir
Filler plug
49
Headlamp and fittings
1 133.050 2
2 084.051 2
3 172.160 2
4 084.081 2
5 162.507 1
6 084.053 2
7 084.087 2
8 162.109 6
9 084.082 2
10 084.054 2
084.774 1
11 084.103 2
12 084.110 2
13 084.812 2
14 084.154 2
15 162.340 2
16 163.062 2
17 084.177 2
18 084.602 1
19 084.052 2
20 084.758 2
21 165.473 2
50
Headlamp bowl, excluded adjusters
Adjuster and spring kit
Retaining clip
Rubber seal, bowl to body
Screw set, 3/16”
Inner bowl
Chrome retaining rim, light unit
Screw
Lamp unit, ‘E’ approved
Headlamp bulb
Pair Halogeen headlamp bulbs.
NOT H4 fitting but a direct replacement for the standard bulb 084.054
Lamp unit, H4, ‘E’ approved
H4 Headlamp bulb
‘J’ lamp unit, H4, NOT ‘E’ approved
Head lamp rim, chrome
Screw
Washer, screw retaining
Dust seal
Bulb kit with standard headlamp bulb
Wiring and headlamp socket
Sidelight unit
Chrome screw, sidelight fixing
ILL N° PART N° 22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
084.069
084.760
084.761
084.816
084.751
084.817
084.818
084.062
084.872
084.802
084.218
084.198
084.191
084.193
084.198
084.119
084.194
084.196
141.409
162.381
161.121
142.131
185.337
QTY DESCRIPTION
2
2
2
2
2
2
2
2
2
2
2
2
2
2
A/R
A/R
A/R
A/R
2
2
2
1
A/R
Bulb
Indicator lens
Clip, lens fixing
Flasher lamp ass, amber
Flasher lamp ass. Clear
Amber lens and rim
Clear lens and rim
Bulb
Body rubber
Fog lamp assembly
Light unit, fog
Bulb
Fog lamp, free standing
Spot lamp, free standing
Bulb for fog lamp
Bulb for spot lamp
Light unit, fog lamp
Light unit, spot lamp
Cone base, chrome
Bolt, lamp fixing
Nut
Pair 5” stone guards, chrome
Lamp protector 5”
©
V a n
G e s t e l
B & C
2 0 0 5
Rear and interior lamps
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
©
284.045
284.046
284.021
084.298
084.316
084.843
084.858
084.062
084.063
084.839
084.840
084.841
084.842
084.874
165.468
084.873
084.602
084.755
084.333
084.298
084.069
084.062
121.743
084.755
084.864
V a n
QTY DESCRIPTION
1
1
1
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
2
1
2
1
1
1
1
G e s t e l
RH plinth
LH plinth
Pair seals, lamp plinth to body
Contact and spring, single
Contact and spring, double
Rubber seal, lens to plinth
Plate for lenses
Bulb, flasher, 21W
Bulb, stop and tail, 21/5W
Amber lens, flasher
Red lens, flasher, USA models
Lens, stop & tail, red
Chrome clip between lenses
Divider shield, between lenses
Screw, chrome plated
Reflector
Bulb kit with standard headlamp bulb
Shroud and bulb holder assembly
Contact set, small
Contact set, large
Bulb, number plate lighting
Bulb, reverse light
Seal, lamp to boot lid
Shroud and bulb holder assembly
Seal for lens
B & C
2 0 0 5
22 084.863 1
23 142.237 1
142.398 1
24 084.096 2
25 084.124 1
26 084.097 1
27 284.047 2
284.048 2
28 284.044 1
29 084.069 1
30 084.261 1
31 135.755 1
32 135.756 1
33 083.088 A/R
34 083.084 A/R
35 083.159 A/R
083.477 A/R
086.187 A/R
086.370 A/R
36 084.126 A/R
37 083.120 A/R
Reverse light lens
Chrome plinth, Jaguar
Chrome plinth, Daimler
Interior lamp, fits on top of the ‘B’ post
Bulb
Lens & cover only
Interior lamp fits on the ‘C’ post
Bulb
Map lamp
Bulb
Rear fog lamp, can easily be fitted on top or bottom side,
chrome back shell, ‘E’ approved
Two hole mounting plate, for switches & warning lights,
made from stainless steel
Three hole mounting plate for switches
& warning lights, made from stainless
On-off switch, use relay from 50 Watts onward
Light switch, three positions, off, side lights & head light
Warning light green
Warning light, red
Warning light, amber
Warning light, blue
Spare bulb, for Ill. No 35
Relay, metal boxed
51
Switches, cables, warning lights, relays & choke control
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
QTY DESCRIPTION
121.821 1 Grommet kit
088.200 1 Switch, windscreen washer
086.751 1 Switch, windscreen wiper
086.748 1 Switch, map light
086.408 1 Switch, starter
086.912 1 Cigar lighter assembly
086.746 1 Switch, lighting O.S.H.F
161.819 1 Nut
086.745 1 Escutcheon O.S.H.F
086.744 1 Escutcheon O.S.H
088.150 1 Fixing bolt, lighting switch
086.747 1 Lever, lighting switch
083.036 1 Switch, ignition
083.035 1 Barrel and key
086.749 1 Switch, fan
086.748 1 Switch, panel light
086.748 1 Switch, interior light
088.388 A/R Lever knob
086.899 1 Lever knob set
063.487 1 Choke knob
063.488 1 Choke escutcheon
161.354 A/R Bezel, switches, 9/16”, see also tool catalogue 190.058
200.665 1 Bezel nut remover
088.147 A/R Lucar blade, for oil pressure gauge
086.890 1 Lens, choke, 2.4 only
084.123 1 Bulb
088.161 1 Warning lamp, hand brake/fluid level
084.123 1 Bulb
085.460 1 Escutcheon
139.594 1 Bracket
166.083 2 Thumb screw, centre dash panel
168.265 2 Washer, black
086.624 1 Rev counter generator
52
29 088.031 1
30 083.091 1
31 086.996 1
32 086.996 1
33 088.148 1
34 086.935 4
35 083.120 A/R 36 083.459 1
086.053 1
088.207 1
088.185 1
086.207 1
088.053 1
088.194 1
088.152 1
088.206 1
134.043 1
37 122.016 1
38 088.100 1
166.157 2
39 088.155 1
088.156 1
40 088.224 1
41 142.406 1
42 284.020 3
43 084.123 A/R
44 086.093 1
Oil pressure switch
Voltage stabiliser, water temp/fuel gauge
Choke warning light switch
Hand brake warning light switch
Transmitter, water temperature gauge
Door switch
Relay, horn
Speedo cable, 243cm, LH drive, Moss gearbox
Speedo cable, 198cm, RH drive, Moss gearbox
Speedo cable, 270cm, LH drive, All synchro g/box
Speedo cable, 173cm, RH drive, All synchro g/box
Speedo cable, 270cm, LH drive, Daimler with All synchro g/box
Speedo cable, 198cm, RH drive, Daimler with All synchro g/box
Speedo cable, 153cm, LH drive, AUTOMATIC models with Borg Warner DG
Speedo cable, 198cm, RH drive, AUTOMATIC models with Borg Warner DG
Speedo cable, 213cm, LH drive, AUTOMATIC models with Borg Warner 35
ALSO DAIMLER
Speedo cable, 178cm, RH drive, AUTOMATIC models with Borg Warner 35
ALSO DAIMLER
Grommet, speedo cable, also in Ill. No. 1
Direction indicator switch
Screw
Indicator strip, LH drive
Indicator strip, RH drive
Lens for indicator strip
Chrome strip
Bulb, indicator strip
Bulb, instruments
6 Piece seal kit
©
V a n
G e s t e l
B & C
2 0 0 5
External body parts
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
©
138.646
138.647
139.488
234.197
232.449
232.448
139.485
232.442
232.443
139.482
139.483
232.440
232.441
232.446
232.447
232.444
232.445
138.135
138.136
V a n
QTY DESCRIPTION
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
G e s t e l
RH front wing
LH front wing
Closing plate, joining front wing to grille
Wing capping piece
LH splash plate
RH splash plate
Side light housing
RH lower skirt
LH lower skirt
RH front wing indicator repair piece
LH front wing indicator repair piece
RH nose repair section
LH nose repair section
RH repair section, rear half
LH repair section, rear half
RH wheel arch repair piece
LH wheel arch repair piece
RH outer sill
LH outer sill
B & C
2 0 0 5
ILL N° PART N° 13
14
15
16
17
18
19
20
138.131
138.132
138.133
138.134
136.465
136.466
138.139
232.785
138.140
232.786
152.291
138.141
138.142
138.143
138.144
138.658
139.491
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
4
1
1
1
1
1
1
RH front door skin, up to ‘A’
LH front door skin, up to ‘A’
RH rear door skin, up to ‘B’
LH rear door skin, up to ‘B’
RH ‘D’post repair panel
LH ‘D’post repair panel
RH rear wheel spats
RH rear wheel spats, narrow, for 5.5” & 6” competition wire wheels
LH rear wheel spats
LH rear wheel spats, narrow, for 5.5” & 6” competition wire wheels
Dzus fastener, 2 required per wheel spat
RH rear wing repair section
LH rear wing repair section
Rear valance, narrow, 3.4 & 3.8
Rear valance, narrow, 2.4
Rear valance, wide, 240 & 340
Radiator access panel
53
Internal body parts
ILL N° PART N° 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
138.652
138.653
138.654
138.655
232.452
139.492
139.493
232.453
232.454
136.477
136.478
139.486
139.487
139.439
139.490
136.471
136.472
232.457
232.678
232.458
54
QTY DESCRIPTION
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
RH chassis leg
LH chassis leg
Front cross member
Front cross member valance, 240 & 340 models
Closing plate, cross member
RH front outrigger
LH front outrigger
RH radiator cowl
LH radiator cowl
RH front wing stay bracket
LH front wing stay bracket
RH gusset reinforcing stay bracket
LH gusset reinforcing stay bracket
RH radiator lower mounting bracket
LH radiator lower mounting bracket
RH front jacking point, outrigger
LH front jacking point, outrigger
RH upper spring hanger
LH upper spring hanger
Lower spring hanger
20 139.494 1
21 139.495 1
22 136.473 1
23 136.474 1
24 138.137 1
138.138 1
25 138.135 1
138.136 1
26 232.455 1
27 232.456 1
28 163.248 11
29
30 136.475 1
31 136.476 1
32 137.576 1
33 186.151 1
34 186.087 1
186.084 1
35 186.080 1
Panhard rod bracket assembly, for RH spring hanger
Upper spring clamp assembly, for LH spring hanger
RH rear jacking point
LH rear jacking point
RH inner sill
LH inner sill
RH outer sill
LH outer sill
RH floor repair panel, above front jacking point
LH floor repair panel, above front jacking point
Washer, oval, securing gear box cover
see external body panel page
RH tonneau side panel assembly
LH tonneau side panel assembly
Stricker plate, boot lock
“Fertan’rust killer, pumpspray 340ml
Waxoyl 2.5L starter kit
Waxoyl 2.5L refill can
Waxoyl spray, 400ml
©
V a n
G e s t e l
B & C
2 0 0 5
Doors, door seals, windscreen front and rear
lLL No PART No
QTY DESCRIPTION
1 138.131 1
138.132 1
2 138.133 1
138.134 1
3 165.462 8
4 165.463 12
5 165.464 4
6 165.462 12
7 162.726 16
8 165.463 6
9 142.261 1
142.260 1
10 142.389 1
142.390 1
11 141.878 1
141.879 1
12 172.879 4
13 122.422 2
14 141.881 4
15 141.882 4
16 142.253 8
17 150.029 4
121.634 4
150.029 4
18 172.088 32
19 121.610 1
20 121.601 1
121.602 1
21 121.603 1
121.604 1
22 121.605 4
23 121.606 1
121.607 1
©
V a n
G e s t e l
RH front door skin, up to ‘A’
LH front door skin, up to ‘A’
RH rear door skin, up to ‘B’
LH rear door skin, up to ‘B’
Screw, see ‘D’,hinge to A post, use 2 per hinge
Screw, see ’E’, hinge to door, use 3 per hinge
Screw, see ’F’, hinge to A post, use 1 per hinge
Screw, see ’D’, hinge to C post, use 3 per hinge
Screw, see ’C’, door to hinge, use 4 per hinge
Screw, see ’E’, hinge to door, use 3 per door
RH front door handle, without barrel
LH front door handle, without barrel
RH rear door handle
LH rear door handle
Lock set, for two doors, boot lock, ignition and glove box lock
Lock set, for two doors
Clevis pin, for door check arm
door buffer, rear door
Handle, door
Handle, window regulator Spring and escutcheon set, use 1 per handle
Weather strip, outside, brush type, up to Apr 1963
Weather strip, outside, flock type, Apr 1963 on
Draught strip, inner, all cars, fits
inside between wood and door glass
Clip, weather and draught strip, use 8 per strip
Info
Fit all door seals, rub in with glycerine
and close all the door for 3 days
Door seal kit, 2 x front and 2 x rear door
RH front door (hinge pillar) seal
LH front door (hinge pillar) seal
RH front door (shut pillar) seal
LH front door (shut pillar) seal
Bottom seal, shorten for rear doors
RH rear door (hinge pillar) seal
LH rear door (hinge pillar) seal
B & C
2 0 0 5
lLL No PART No
QTY DESCRIPTION
24 121.608 1
121.609 1
25 121.
1
121.
1
26 120.183 2
27 121.562 1
121.563 1
28 142.345 1
142.346 1
29 162.613 4
166.145 4
30 120.183 2
31 120.184 2
32 121.061 4
33 120.185 2
34 121.624 2
35 142.347 1
142.348 1
36 165.478 4
37 165.470 10
38 166.146 4
39 121.913 4
40 120.177 1
120.178 1
41 121.550 1
42 121.633 3.5
43 140.555 1
44 140.556 1
45 137.963 2
46 120.180 1
120.181 1
47 121.551 1
48 140.577 1
49 140.578 1
RH rear door (shut pillar) seal
LH rear door (shut pillar) seal
RH rear door, lower piece
LH rear door, lower piece
Glass, front quarter light
RH seal, quarter light
LH seal, quarter light
RH handle, quarter light
LH handle, quarter light
Screw, upper pivot hinge to frame, length 1/4” (check length)
Screw, upper pivot hinge to frame, length 1/2” (check length)
Glass, front door
Glass, rear door
Seal, glass to lower channel,
before using this special seal, wet the
seal with thinner.
Glass, rear quarter light
Seal, quarter light
RH rear quarter light vent catch
LH rear quarter light vent catch
Screw
Screw, quarter light frame to door frame, use 5 per frame
Screw, fixing vent plate to quarter light frame
Window felt, approximately 183cm
Front screen, clear
Front screen, green tinted
Front glazing seal
Filler rubber, sold per meter
RH front finisher
LH front finisher
Joint piece
Rear screen, clear
Rear screen, tinted
Rear glazing seal
RH rear finisher
LH rear finisher
55
Bonnet, boot lid, bumpers & small chrome parts
lLL No PART No
QTY DESCRIPTION
1 141.866 1
2 162.076 1
3 142.489 1
4 234.148 1
234.484 1
234.485 1
234.486 1
5 165.850 11
6 161.054 11
7 122.544 2
8 122.422 2
9 121.589 2
10 121.818 1
11 134.955 1
12 139.076 1
13 122.571 4
14 122.422 4
15 121.819 2
16 122.455 6
17 122.455 2
18 121.586 4
19 122.459 4
20 142.239 1
21 162.718 2
56
Leaping Jaguar mascot
Screw, check!
Daimler mascot
Strip set, chrome, centre bonnet, when Jaguar mascot is fitted
Strip, chrome, centre bonnet, when
Jaguar mascot is NOT fitted
Strip set, chrome, centre bonnet, when Daimler mascot is fitted
Strip, chrome, centre bonnet, when
Daimler mascot is NOT fitted
Special screw, strip
Nut
Bonnet rest rubber, front
Bonnet rest rubber, rear
1m Bonnet rest rubber, rear
Scuttle vent seal
Bonnet pull cable
Cable adjuster assembly
Plug, jacking hole
Plug, rear door rest
Seal, rear spats
Rubber buffer, rear spat
Rubber buffer, fuel cap door
1m Seal, boot lid
Buffer, number plate
Escutcheon, boot lid lock
Screw, escutcheon
lLL No PART No
QTY DESCRIPTION
22 141.878 1
23 142.237 1
24 142.398 1
25 121.682 1
26 140.574 1
27 173.134 4
28 142.338 1
29 142.333 1
30 142.334 1
31 142.337 1
32 142.335 1
33 142.336 1
34 172.233 A/R
35 142.490 1
36 142.491 1
37 142.492 1
38 140.644 1
39 140.646 2
40 140.645 1
41 140.647 1
42 140.648 1
43 121.635 2
44 165.472 4
45 165.461 2
46 139.925 1
47 121.521 1
Lock set, for two doors, boot lock,
ignition and glove box lock
Chrome plinth, Jaguar
Chrome plinth, Daimler
Seal, plinth
Chrome beading, number plate
Staple, chrome beading
‘JAGUAR’ badge
‘3.4’ badge
‘3.8’ badge
‘AUTOMATIC’ badge
‘240’ badge, Sept 1967 on
‘340’ badge, Sept 1967 on
Fix-blind, most badges use 2
‘Daimler’ boot badge
‘250’ badge, Jul 1967 on
‘V8’ badge
Front bumper, up to Sept 1967
Overrider, front
Rear bumper
RH rear overrider
LH rear overrider
1m seal, between overrider and bumper
Bolt, overrider, also in 46
Bumper bolt, chrome, also in 46
Front bumper bolting kit, up to 1967
Seal between bumper & boddy
lLL No PART No
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
QTY DESCRIPTION
142.339
142.340
164.016
161.024
017.049
142.341
142.493
163.007
164.015
161.024
136.990
139.926
140.649
140.651
140.652
140.650
140.653
140.654
161.026
139.927
142.339
142.340
164.016
161.015
121.931
232.784
139.928
142.235
140.418
©
1
1
2
2
4
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
2
2
4
1
1
1
1
V a n
RH chrome end cap
LH chrome end cap
Washer, shakeproof
Nut
Bumper mounting
badge ‘DISC BRAKES’
Badge “D” for Daimler
Washer plain
Washer, spring
Nut
Front number plate
Rear bumper bolting kit, up to 1967
Front bumper, Sept 1967 on
RH front overrider
LH front overrider
Rear bumper
RH rear overrider
LH rear overrider
Nut
Front bumper bolting kit, 1967 on
RH chrome end cap
LH chrome end cap
Washer, shakeproof
Nut
Buffer, rubber
Front number plate
Rear bumper bolting kit, 1967 on
MKII badge, up to sept 1967
Badge bar, see also page 59
G e s t e l
B & C
2 0 0 5
Grill, chrome beadings, wood set and mirrors
lLL No PART No
QTY DESCRIPTION
1 140.619 1
2 139.637 1
3 142.405 2
4 234.179 1
5 234.180 1
6 234.181 1
7 142.331 1
8 234.182 1
9 234.183 1
10 234.186 1
11 234.187 1
12 234.188 1
13 234.189 1
14 234.184 1
15 234.185 1
16 152.256 24
17 173.149 4
18 152.273 10
19 165.922 2
20 152.273 10
21 172.
2
22 172.
26
23 234.487 2
234.488 2
24 142.263 1
©
V a n
G e s t e l
Chrome beading set
Clip kit for chrome beading set,
78 pieces, contents: 14 T bars, 20
clips, 18 rivets, 12 studs & 14 nuts
Joint piece
Pair bonnet beadings
Pair scuttle beadings
Pair front door beadings
Pair ‘B’ post beadings
Pair rear door beadings
Pair rear wing beadings
RH front drip moulding
LH front drip moulding
RH rear drip moulding
LH rear drip moulding
Pair front door beadings
Pair rear door beadings
Retainer, bonnet beading
Clip
Retainer, door beading
Bolt and stud
Retainer, door beading
Clip
Clip, rear beading
‘B’ post finisher, up to Sept 1966
‘B’ post finisher, Sept 1966 on
Mirror, rear view
B & C
2 0 0 5
lLL No PART No
QTY DESCRIPTION
25 165.821 2
163.240 2
26 142.234 2
27 140.575 1
28 140.576 1 29 141.867 1
30 141.868 1
31 141.869 1
32 142.170 1
33 139.931 1
139.932 1
34 140.658 1
35 140.659 1
36 140.660 1
37 142.240 2
38 141.011 1
141.012 1
39 141.116 2
40 141.627 2
41 141.117 2
42 141.953 2
141.628 2
43 159.894 1
44 165.641 1
Screw
Washer, plain
Headlight spear
Grill, Jaguar
Centre piece, badge holder
Grill badge, 2.4
Grill badge, 3.4
Grill badge, 3.8
Backing piece for grill badge
Grill fixing kit, Jaguar
Grill fixing kit, Daimler
Grill, shell only, Daimler
RH grill slat ass.
LH grill slat ass.
Horn grill, when no fog lamps are fitted
For mirrors, see also page 60
Lucas repro mirror, convex,
RH wing or LH door
Lucas repro mirror, convex,
LH wing or RH door
Curved stem arm
Offset stem arm
Round mirror, convex
Oval mirror
Rectangular mirror
Veneer custom one wood set, see info !
Screw set, 20 screws and 20 cup washers
57
Interior, seat components, headlining, seat belts, etc..
Grey
lLL No PART No
QTY DESCRIPTION
O ur complete trim kits contains:
Carpet set, A,B,C & D-post panels, under dash panels, boot mat, furflex, panel kit, connolly leather seat
covers front & rear, headlining, under felt kit, rear parcel panel, vinyl, centre console kit, radio console
kit, panel and carpet fixing kit. Please note that seat foams, seat wood boot trim panels etc are Not
supplied in our kits, Ask your local salesman for more information.
1 158.347 1 Trim kit, Jaguar 2.4/3.4/3.8, up to 1964
158.348 1 Trim kit, Jaguar 2.4/3.4, 3.8 1964 on
158.349 1 Trim kit Jaguar 240/340
158.350 1 Trim kit, Daimler V8
158.351 1 Trim kit, Daimler V8 250
2 157.094 1 Pair front seat base foams, Jaguar
157.095 1 Rear seat base foam, Jaguar
3 157.096 1 Pair backrest foams, front, Jaguar
157.097 1 Rear seat backrest foam, Jaguar
For Daimler ask for details
4 142.344 2 Reclining handle, without knob
5 122.497 8 Rubber buffer, fold down table( Picnic)
6 234.132 1 LH seat runner with lock
234.126 1 LH seat runner, plain
234.131 1 RH seat runner, with lock
234.125 1 RH seat runner, plain
7 139.536 1 Seat fixing kit for two seats
8 159.895 1 Head lining kit, grey
159.896 1 Head lining kit, beige
159.897 1 Head lining kit, green
9 151.097 A/R Insulation felt
10 187.009 1 Glue gel, 625gr
11 159.898 1 Pair sunvisors, grey, Nov 1960 on,
without chrome surround
159.899 1 Pair sunvisors, beige, Nov 1960 on,
159.900 1 Pair sunvisors, green , Nov 1960 on,
12 142.233 2 Bracket, chrome, sunvisors
13 139.537 1 Screw kit, sunvisiors
14 159.901 1 Glove box
58
lLL No PART No
Fawn
Green
QTY DESCRIPTION
15 166.083 2
16 168.265 2
17 162.076 4 18 165.480 4
19 141.880 1
20 166.147 3
21 142.244 1
22 141.747 2
23 139.933 1
24 122.538 1
25 026.219 1
26 165.465 2/4
27
1
28
1
29 251.088 1
30 251.089 1
31 172.138 80
32 152.287 28
33 152.286 28
34 152.283 10
35 150.836 A/R
36 251.090 1
37 251.091 1
38 121.275 10
121.276 10
121.420 10
121.421 10
121.643 10
121.644 10
39 185.776 2
40 185.775 2
Thumb screw, centre dash
Fibre washer
Screw, hinge centre dash
Screw, glove box hinge
Glove box lock
Wood screw, glove box lock
Medallion on lid of ash tray
Ash tray, fits in rear door armrests
Fixing kit, gearbox cover to body
Gaiter, gear lever
Ring, gaiter gear lever
Knurled nut, securing central
console side panels, early cars use 2
Gear lever gaiter, leather, ask for details, also in Ill. No. 1
See heater system page 22
Boot mat, black, also in Ill. No. 1
Pair boot side panels, dark grey
Trim panel fastener, 22 for one front &
18 for one rear door
Carpet socket, female
Carpet socket, male
Carpet fastener, bow type
Bitumen sound deadening pad, 66 x 20cm
Pair front foot mats, two piece type,
up to May 1964, ask for colour
Pair front foot mats, one piece type,
May 1964 on, ask for colour
Furflex, black, sold per meter
Furflex, red, sold per meter
Furflex, blue, sold per meter
Furflex, beige, sold per meter
Furflex, green, sold per meter
Furflex, grey, sold per meter
Static belt 3 point, black
Automatic belt 3 point, black
©
V a n
G e s t e l
B & C
2 0 0 5
I.D. Plates, Stickers, badges and badge bar
1
2
3
4
5
7
6
13
12
8
10
9
14
11
18
15
16
19
28
17
20
21
22
23
27
26
25
29
24
lLL No PART No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
©
QTY DESCRIPTION
085.397
085.399
085.165
085.406
162.376
152.034
085.386
085.408
085.260
085.082
085.455
085.413
185.154
185.002
162.405
V a n
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
G e s t e l
Chassis plate, Jaguar
Chassis plate, Daimler
Screen jet decal
Run-in decal, red, both sides printed, Jaguar
Screw & nut kit 14 pieces
Set of small rivets, 10 pieces, for I.D. plate fixing
‘Trico’washer bottle decal
‘Made in England’ plate
Battery sticker, gold/red
‘Lucas’Coil sticker
‘Marston Excelsior Ltd’plate, for radiator
Jaguar sticker, red on white, accessory
GB letters, chrome, fixed with nuts
Union Jack badge, top quality
Screw, chrome plated
B & C
2 0 0 5
lLL No PART No
QTY DESCRIPTION
16 161.054 4
17 185.708 2
18 085.172 1
19 085.385 1
20 081.561 1
21 185.712 1
22 185.605 1
23 185.210 1
24 140.418 1
25 185.049 A/R
26 133.834 A/R
27 085.096 1
28 085.158 1
29 139.370 A/R
Nut
Union jack badge, with dummy screws
AC Sticker, air cleaner, square type
AC Sticker, air cleaner, round type
Cable identification set for HT leads
Key-fob, Jaguar
Key-fob, Daimler
Key-fob,black leather, Union jack
Badge bar, straight, 61cm and ¾” thick,
comes with two adjustable feet.
Clamp, badge to badge bar
Mounting plate, badge to clamp
Saint Christopher badge
Royal Automobile Club badge
Stainless steel screw kit, badge to clamp
59
Mirrors
Clamp-on mirrors
No drilling holes, clamps onto windscreen frame
Part nr.
141.929
Round
clamp-on
Part nr.
141.192
Part nr.
Classic style
141.852
Round clamp-on
Part nr.
Part nr.
141.949
141.950
Classic style
Classic round style
with tightening screws
with tightening screws
Lucas repro mirror
with Covex glass
141.011 RH wing or LH door
141.012 LH wing or RH door
Part nr.
60
141.930
8
Seal
Pair wing
mirrors
Chrome plated
Part nr.
141.627
Offset
stem arm
Part nr.
On spring
141.953
Rectangular mirror
124X82mm, Convex glass, ‘E’ MARKET
Part nr.
141.116
68
46
Part nr.
141.942
LH or RH door mirror
Curved
stem arm
Part nr.
141.117
On spring
Round mirror
Flat glass, 45° stem
60
108mm diameter, Convex glass
©
V a n
G e s t e l
B & C
2 0 0 5
Engine tuning & accessory parts
Part nr.
Part nr.
101.854
101.853
MONZA Oil filler cap
Part nr.
017.205
ASTON Oil filler cap
Special adaptor collar
2.1/2” diameter and chrome plated. To be 2.1/2” diameter and chrome plated. To be
used with the adaptor collar 017.205.
used with the adaptor collar 017.205.
For 2.1/2” Aston or Monza oil filler cap. This
collar has a double thread and will fit all XK’s
valve covers up to the XJ6 Series II. Once the
collar is fitted you can choose your own foil
filler cap design, either Monze or Aston.
Pair
reconditioned
rocker covers
Composite head gasket
Highly polished and ready to fit.
Part nr.
For long life and will hold high compression.
Should be fitted dry to skimmed head and block surface.
Description
018.066 2.4, 3.4 & 3.8
018.080 4.2
Part nr.
Description
016.823 3.4 Composite head gasket
016.824 3.8 Composite head gasket
Part nr.
013.843
Pair reprofiled camshafts
Part nr.
017.102
for 3.4, 3.8 or 4.2cc engines.
Fast road specifications. These all round cams improves mild range.
Cam lift 380 or 9.67mm, duration degree 270 , timing 25/62 62/25,
Valve clearances IN 6 EX 8 (thou).
Part nr.
017.208
‘Metalastik’ high quality
engine mountings
This is one of the most important improvements,
even for a fast road specification
engine.
• 013.844 Pair reprofiled camshafts
Vibration Damper
The finest available, full racing specification vibration damper.
A must for high RPM use or just for a smoother running engine.
for 3.4, 3.8, 4.2cc engines. Road competition, useable on road and
best with triple SU’s or Webers. Cam lift 426 or 10.82mm, duration
degrees 308, timing 52/76 76/52, Valve clearances IN 6 EX 8 (thou).
The picture below explains that by grinding a
lobe smaller, more lift can be achieved. By
reducing the base circle diameter, not only the
size of the lobe is reduced. When adjusting
the valve clearance, the cam follower sits
closer to the shaft and the levering of the lobe
is increasing, and thereby increasing the lift.
New lift
Old lift
Part nr.
018.056
Heavy duty
valve spring set
These heavy duty springs eliminate float at high RPM will result in a
constant power delivery.
Part nr.
017.278
Lightened, fully balanced flywheel
Sold on an exchange basis and drilled to accept both standard and 9.1/2”
diaphragm type clutch cover. This flywheel comes complete with a new 104
teeth ring gear fitted.
Increase
in lift
Part nr.
017.430
Core plug strap kit
These little straps are designed specifically
to hold your core plugs tight to
your engine block.
Part nr.
200.869
Tappet hold-down kit
The tappets guides can work loose, especially
under the stress of high RPM or even just a lot of Km.
This guide hold-down kit is the prevention needed. Fitting
this kit is always less expensive that a loose tappet can
cost you. Only required for left side tappets.
©
V a n
G e s t e l
B & C
2 0 0 5
Part nr.
200.839
Cam alignment tool
For XK six cylinder and V12 engines.
61
Oil improvement, starter motor
Oil cooler kit
A big improvement, not only to keep the oil temp.
In control but this improved head
has a better pressure
valve.
Part nr.
Part nr.
185.093
Description
Push-on oil stat 80°C.
185.720 3.4, 3.8 Early
185.... 3.4, 3.8 Late
Part nr.
* Replacement oil
filter use 017.113
185.622
Screw-on oil stat
80°C with professional ½”
BSP connections.
Oil cooler radiator, ½”BSP connections
Part nr.
Part nr.
011.917
Rear crankshaft oil seal conversion kit
Very functional but the rear of the crankshaft has to be ground to 75mm before
fitting this kit.
Replacement oil seal 016.859
Description
060.016 10 Row oil cooler
060.003 13 Row oil cooler
Part nr.
013.811
High output oil pump
For maximum oil delivery.
You will have to improve the
oil pick-up as well.
Part nr.
Oil cooler shroud
185.440
For cold mornings or when temperatures are getting low, do not
undercool the oil and fit this shield or an oilstat (shown on this page).
011.050
Filter sold individually
High
performance
starter motor
Part nr.
190.058
British parts, tools &
accessories catalogue
62
Part nr.
Description
017.212
Up to KH1001-KH7062, 3.8 all LA, all LB, LC1001-LC4264
3.4 from KH7063-KH9999, 3.8 all KJ, LC4265-LC9999, all 7J
017.281
Spin-on
oil filter
conversion kit
Part nr. Description
082.156 2.4, 3.4, 3.8 Starter motor
082.157 4.2 Starter motor
©
V a n
G e s t e l
B & C
2 0 0 5
Cooling improvements
Part nr.
018.042
Bypass closing
thermostat
Aluminium radiator
supplied without fan
Part nr.
74° Any cooling problems?
Start checking if this type thermostat is fitted.
Once the thermostat opens, it will block the
bypass and makes sure all water has
to go through the radiator.
Part nr.
185.130
Description
Fan switch radiator mounting
Aluminium radiator
with single Kenlow
fan fitted
060.120 MK2 3.8
060.139 MK2 2.4, 3.4
Part nr.
185.127
Part nr.
Description
060.138 MK2 3.8
060.140 MK2 2.4, 3.4
For customers who want to fit their own fan,
but, would like to take advantage of the
very famous Kenlow adjustable thermostat
switch, we offer this switch on its own aswell.
Kenlow Fan Kit
Fits in front of the radiator and has an automatic
control. This Kenlow fan kit has a 13” fan
and comes complete with an adjustable
thermostat switch. Two fixing systems are
supplied in our kits, you can
mount the fan on aluminium
brackets,
or, use the nylon straps to
fasten the fan direct to the
radiator core.
Part nr.
186.159
4 Liter Coolant for winter & summer
Three of these are required to
fill-up an XK cooling system.
This coolant acts as an anti-freeze
and protects from corrosion.
DO NOT USE just water , it will damage
aluminium ( cyl.head etc.).
Part nr.
198.044
Water Wetter
Part nr.
061.525
Flexi fan
As the engine speeds up
the blades of the flexi fan
blades flatten out causing less drag and noise.
When the RPM drops for use in traffic the blades pull more air.
©
V a n
G e s t e l
B & C
2 0 0 5
This super coolant helps control
overheating by reducing surface
tension inside the radiator.
Your car can run up to 7°C cooler.
Use only one or two of these
bottles and the ‘Water Wetter’
will do the job.
63
Carburettor accessories & air filters
Facet
Pumps
Part nr.
101.147
Ram pipes for SU
hen the air filters are not fitted, these ram pipes improve
W
the flow. Made from spun alloy tubes with a radius and
mesh guard.
Part nr.
101.330
Earth
Positive + Negative -
5 PSI 108.287 101.191
7.5 PSI -
108.209
Unions
Description
K&N airfilter
off-set tapered
(compact) 1.3/4”
Part nr.
198.015
Part nr.
For 5 PSI pump
101.192 pair
For 7.5 PSI pump 108.541 pair
Adaptor for SU,
sold individually
Cleaner spray
for inside
& outside
Part nr.
Description
200.682 1.3/4” SU
200.683 2” SU
For 5 PSI pump
108.210 pair
For 7.5 PSI pump 108.542 pair
Part nr.
One pair ‘Midlock’
synchroParttester
nr.
K&N airfilter
101.821
In-line Fuel filter
It’s important that your fuel has been
filtered properly
Part nr.
Description
185.012
101.338
1.3/4” central
1.3/4” off-set
200.679
Part nr.
101.819
Fuel Pressure
Regulator
Another quality product to make
sure yourpressure is optimal
Part nr.
Part nr.
101.422
330.070
Dashpod
damper
oil
Breather hose adaptor
½” Flange, ¾” long
Part nr.
102.302
Three piece tool kit, SU
Part nr.
108.248
Replacement fuel filter
Part nr.
Part nr.
186.043
200.739
Cleaner
for the
filter
elements
Part nr.
108.247
King filter regulator
with glass bowl (67mm) 1.5-5PSI, ¼” bore
SU Box spanner
For needle and seat
Part nr.
200.573
Set of tools to
tune up your SU
Part nr.
198.042
Special oil spray
Part nr.
172.051
for K&N filter elements
Hose clamp
64
Lenght
6 cm length
17 cm length
19 cm length
25 cm length
30 cm length
35 cm length
38 cm length
Part nr.
102.216
Part nr.
200.572
Flexible
fuel hoses
Partn°
102.095
101.325
101.384
101.326
101.327
101.328
101.047
T his kit includes
a mixture test
gauge,
rods ti set the
float level, jet wrench,
a jet centering tool and instructions
Carburettor
synchronizer
tool
Part nr.
Part nr.
Part nr.
190.225
190.056
190.586
Grosse jet
Needle & seat improvement
This efficient
fuel cut-off
is based on a ball system.
This will be the last
needle & seat
you order.
©
V a n
G e s t e l
B & C
2 0 0 5
Ignition improvements
Optronic ignition system
Formula Power, silicone high
Super lead set, originally
tension lead
developed for race.
Minimum loss and
set
greatly extended cable life.
Spiral magnetic 4 core 10mm blue
silicon extreme heat resistance. Can also
be fitted to a much more powerful coil if needed
Lumenition Optronic Ignition is an electric ignition conversion kit principally for cars
originally fitted with mechanical distributors using contact points. The advantage of
the Lumenition system is that it contains no wearing parts, requires no adjustment or
maintenance during service and once ignition timing is set it will remain permanently
tuned. The engine will start better, last longer and run more economically through
improved efficiency. There are only three components, very compact and simple to fit.
Part nr.
181.065
Late style with 90° end
caps at spark plug
Originally for Neg. earthed cars, ask for wiring info when pos. earthed
Distributor
Power supply module
Lucas DMBZ 6A
Jaguar
Lucas 22D6
Jaguar
Lumenition, no
wearing parts &
always perfect timing.
Part nr.
Part nr.
}
}
}
Lucas 40676K-20
Daimler
086.082+
086.462
185.743
Fitting Kit for distributor
Aluminium spacer block
Spark plug wire holder, made from solid aluminium
086.082+
086.081
086.082+
088.276
Part nr.
081.656
System with mechanical
distributor and
contact points.
Magnetronic
ignition coil
Magnetronic ignition system
To replace contact breakers and condensers
Lumenition is proud to present the NEW Magnetronic Ignition System.
Designed to replace troublesome points with a simple drop in installation.
Each unit comes complete, ready to fit straight into your existing distributor.
You will notice that your car will start
immediately, have better fuel consumption, and increased
performance. The Magnetronic
Ignition System is suitable for most
Lucas distributors,
NEGATIVE EARTH and with or
without vacuum advance.
Partn°
Part nr.
185.657
Optronic ignition coil
High energy electronically matched for
optimum output from the Optronic system.
High energy electronically matched for
optimum output from
the Magnetronic
system. (must be
used with a ballast
resistor)if not already
fitted then Part No.
086.608 is required.
Lucas model
086.579 22D6
Ask your local Anglo Parts shop for more information
The benefits of the Magnetronic are: it is quick and easy to fit, completely
self contained within the distributor and is a two wire connection.
The unit is housed in a solid die-cast dissipating body which is
unaffected by distributor wear and gives all the advantages associated
with our Ignition Systems.
Part nr.
081.195
Sport coil, NOT for electronic ignition
NEGATIVE EARTH ONLY!
©
V a n
G e s t e l
B & C
2 0 0 5
65
5 speed gearbox, & asbestos free heat reduction products
Getrag conversion kit
Jaguar MKII
Bolts direct to the
orginal bellhousing
This kit comes complete
with a propshaft,
clutch plate and
completely rebuilt
5 speed gearbox
Part nr.
020.244
Part nr.
159.902
Bonnet firewall
insulation kit
Part nr.
232.787
Exhaust heat
shield kit, Jaguar
All 100% asbestos free
Part nr.
159.407
Cool-tape
Part nr.
172.076
3.5cm x
450cm
Strap
Handy strap for securing the wrap around tubes and small parts.
Part nr.
Used for wrapping
wires, small relay's,
hoses etc.. in the engine
bay. Very strong adhesive.
Part nr.
159.404
Exhaust wrap
5cm wide by 1500 cm long.
Reduces the engine bay temperature with
up to 45%. This temperature reduction is
beneficial towards breathing. Cooler air
and avoiding premature failure on
costy engine components due to
thermal deterioration.
159.406
Versa
shield
60 x 18 cm
Universal heat shield
to protect starter motors,
carburettors, electrical parts,
fuel pumps etc.. from heat.
Can be cut to shape and secures
itself using the velcro provided.
Part nr.
Part nr.
159.408
159.405
Heat shroud
90cm long and covers from 2 to 3cm wire or hose.
A fast and efficient solution for hoses, lines and tubes. Easy to use and
install, the heat shroud utilizes a full length hook and loop material
as a closure. Can be cut to length with a sharp knife.
66
Heat screen
100cm x 90cm
Designed with many uses in mind. Heat Screen is capable of withstanding
direct heat up to 500 C° on one side, while protecting against radiant
temperatures up to 1000 C° on the aluminised side.
©
V a n
G e s t e l
B & C
2 0 0 5
Steering and suspension improvements
Power steering rack conversion LHD
Part nr.
Description
045.311 3.4 & 3.8
045.312 2.4
• With electrical pump and alternator • Comes with fitting material • For Daimler ask your local salesman
Rear suspension conversion kit
Part nr.
045.346
• Improved the handling drastic • Jaguar and Daimler
Uprated anti-roll bar kit
Jaguar and Daimler
Part nr.
045.313
Front/rear shock absorbers,
Spax or Koni Jaguar and Daimler
*two required
©
V a n
G e s t e l
B & C
Part nr.
Description
045.314
042.841
045.315
042.842
Spax, front
Koni, front
Spax, rear
Koni, rear
2 0 0 5
Part nr.
Description
045.341 Front kit, 5/8” anti-roll bar
Polyurethane suspension 045.342 Front kit, 11/16” anti-roll bar
bushes kit Jaguar and Daimler 045.343 Rear kit
67
Improved braking
Part nr.
Part nr.
Coopercraft uprated brake
system for Jaguar and Daimler
Coopercraft rear improvement kit
for Jaguar and Daimler
050.523
050.524
* Easy to fit * Stainless steel pistons * New and improved calliper design
* Uses your original brake disc * No modifications
are required
* Redesigned and uprated cylinders
* Stainless steel pistons
* Utilizing the standard
handbrake system
* Easy fitting
* Good balance
with the front
uprated set
Replacement pads
053.306 Green stuff brake pads
053.331 Standard brake pads
Part nr.
050.525
Stainless steel braided
hoses for Jaguar and Daimler
Vented disc kit for Jaguar and Daimler
Part nr.
* For ultimate stopping power * Easy fitting with no modification neccessary
* Improved cooling in the arduous braking conditions of modern traffic
Description
054.793 Front brake hose, 2 required
054.794 Rear brake hose
The one thing that has the most dramatic
effect on car braking performance is the
quality of the friction material
GIVE IT A BRAKE, GIVE IT
GREENSTUFF!!
Part nr.
053.082
Brand new Lockheed servo unit
for Jaguar and Daimler
For in-line installation. Also see British Parts catalogue ‘190.058’ page 54.
Part nr.
053.039
1L DOT 4
Lockheed brake fluid
* Resist higher temperatures
* 20% more grip
* Less black dust
Part nr.
Part nr.
053.306
053.495
For Jaguar and Daimler
3 & 4 pot callipers green pads
(kit 050.523 & 050.525)
68
Square callipers green
pads for Jaguar and Daimler
For kit 050.524 and the original callipers
Part nr.
053.018
1L Silicone brake fluid
©
V a n
G e s t e l
B & C
2 0 0 5
Alternator/starter conversion & elektrical improvements
Alternator conversion kit
For negative earth application
Jaguar only
Wiring info: Alternator conversion wiring for
NEGATIVE earth cars
At regulator box: *Change thick yellow wire from ‘D’to ‘A’or’B’
*Change yellow/green wire from ‘F’to’D’
At alternator:
* Yellow/green to small terminal
*Yellow wire to either of large terminals
Part nr.
Description
082.154 Single groove pulley
082.172 Twin groove pulley
Replacement starters Jaguar only
This modern reliable starter gives more torque with less power
drain when starting, this makes it ideal for
daily use. They are also easier to install
as they are lighter and smaller
Part nr.
Description
082.156 2.4, 3.4 & 3.8
082.157 4.2
Part nr.
082.236
Improved 2
speed wiper system
Electric window kit
With this electric window kit you can open and close your windows
without any effort at all. Kit for 2 windows:
• Comes with fitting instruction
• Color diagrahm
• All wiring
• Accessories
Part nr.
When your wiper motor is damaged, you have 2
possibilities to have it fixed:
1) Your old core (the original wiper motor on your car)
can be rebuilt, see picture on the right side, the original Lucas wiper motor.
2) You can buy a new wiper motor, also Lucas, and comes with a
handy two speed wiper system, see picture above.
Part nr.
185.680
Central door locking kit
Kit for all 4 doors, comes with fitting instructions • color
diagrahm • all wiring • accessories
Description
185.832 Kit for 2 front doors only
185.833 Kit for 2 front & 2 rear doors
©
V a n
G e s t e l
B & C
2 0 0 5
69
Competition wheels, Coombs spats and spinners
Competition wheel
Part nr.
047.100
16” Protection band
Part nr.
Luster
Lace, metal polish
198.050
The picture above shows you a standard wire wheel (partn° 046.029)
on a Jaguar MKII with standard spats. It’s necessary to fit the narrow
(Coombs style) spats, see picture below, when fitting competition
wheels on your Jaguar MKII, for more clearance to the wheels.
This is the best way to polish your chrome and stainless steel metal.
It’s so simple and effective. The polish is in the cloth that you wrap around your
chrome wheels etc. Test this very simple way of polishing and you’ll be astounded!
Part nr.
186.034
Copper grease
With wire wheels your hubs and spinners get very hot.
Normal grease
becomes liquid
and disappears,
Part nr.
causing them to
042.097
get stuck with
Hammer,
risk of damage.
This copper grease
copper/rawhide
withstands these
1.15Kgr.
high temperatures
and makes it easy to
remove spinners.
Part nr.
Description
046.035
046.034
046.145
046.144
6 X 15 Chrome competition wire wheel
6 X 15 Painted competition wire wheel
5.5 X 15 Chrome competition wire wheel
5.5 X 15 Painted competition wire wheel
Narrow
(Coombs style) rear spats
Part nr.
Description
232.785 RH rear spats, narrow (Coombs style)
232.786 LH rear spats, narrow (Coombs style)
It might be needed to fit narrow (Coombs style) rear
spats for more clearance to the rear wheel
Part nr.
185.704
52MM
Spinner remover
Part nr.
Wire
wheel cleaning brush
185.050
Part nr.
042.221
Remover tool,
for 52MM federal
Part nr.
Description
042.217 RH ‘Jaguar’ federal
042.218 LH ‘Jaguar’ federal
70
Part nr.
Description
042.219 RH ‘Daimler’ federal
042.220 LH ‘Daimler’ federal
Part nr.
Description
042.211
042.212
042.213
042.214
042.215
042.216
RH 2 eared ‘Jaguar’ LH 2 eared ‘Jaguar’
RH 2 eared ‘Daimler’
LH 2 eared ‘Daimler’
RH 2 eared plain
LH 2 eared plain
©
V a n
G e s t e l
B & C
2 0 0 5
Derrington & Moto-Lita steering wheels
These quality accessories are
made from strong, finely finished solid wood. They are a
must for the classic driver who
likes that extra bit of finesse.
Since the early fithties Moto-Lita has been designing
and manufacturing unique steering wheels in wood
and leather. Each steering wheel is a piece of artwork
built by British craftsman. The wooden steering wheels
are made from carefully selected cross-laminated
timber which is bonded and rivetted to a high quality
hand polished alloy 3 spoke frame. They are then
handfinished with a hardwearing deep lustre finish
which is resistant to petrol, oil and the elements.
Moto-Lita Steering wheels
Classic four spoke
MK3 Wood rim
MK3 Leather
185.689 35CM
185.690 38CM
185.026 35CM
185.027 38CM
185.156 35CM
185.157 38CM
Part nr.
Size
Part nr.
Size
Part nr.
Size
‘Derrington’ steering wheel
Part nr.
185.388
Boss for
Moto-Lita
steering wheels
• Except ‘Derrington’ style steering
wheel • Jaguar, for Daimler order
also badge 085.485
Part nr.
Highly desirable
‘Derrington’style 16”steering wheel
185.831
Part nr.
185.830
Aluminium billet
centre hub cap 3 ½‘’
©
V a n
G e s t e l
B & C
2 0 0 5
• Comes with hub, horn ring/horn ring cover not included
• Use custom one ring/ring cover
• Jaguar and Daimler
The picture above shows a complete ‘Derrington’ Steering
wheel. For more info about how to put this steering
wheel together, and what parts you need
see page 42 or call your local Anglo Parts salesman.
71
Car covers, cap and pewter models
Part nr.
159.520
P
E
Green indoor car cover W
T
E
R
8
Made from 100% pure cotton, the inside has been brushed to give a soft flannel
appearance. Although the material has been pre-washed, we recommend
washing in cold water and soft soap.
Part nr.
159.517
M
O
Car cover Moltex
D
E
L
Moltex car covers are made from strong lightweight breathable waterproof material. Whether
you are looking for an in-door car cover, or a way to keep the sun off your car during the day,
or an all season outdoor car cover, a Moltex car cover is the best solution. These universal
car covers come with a stowage bag and two
elasticated ropes with four hooks to keep the
cover securely in place. Make sure the
cover doesn’t move because of wind.
Tighten with additional ropes or elastic to
avoid the car cover making matt areas
through friction!
1
7
Ill. Part nr.
Description
1 195.206 2 195.208
3 195.209 4 195.210 5 195.211
6 195.212 7 195.213 8 195.214 9 195.215 10 195.216 11 195.217 Jaguar XK120
Jaguar XK150
Jaguar C type
Jaguar E type, series 1 coupe
Jaguar E type roadster
Jaguar E type V12 coupe
Jaguar E type V12 roadster
Jaguar MK2
Jaguar XJ6
Jaguar XJS
Jaguar XK8
5
S
Part nr.
185.674
Jaguar cap
11
72
©
V a n
G e s t e l
B & C
2 0 0 5
Practical accessories and safety products
Part nr.
KRYPTONITE automotive security
185.790
• 5 years warranty • Steel reinforced keyway • Hardened steel
resists prying, freezing, saws, bolt cutters • Protective vinyl
coating • Pick and drill-resistant lock mechanism • Easy
to use • Complete instructions and key registration
(info inside packing)
Part nr.
185.332
Fire extinguisher
‘E‘ Approved, 1 Kgr dry chemical fire extinguisher.
We hope you will never have to use it, but, just in case,
have it with you.
Part nr.
086.782
Battery
switch
Part nr.
Part nr.
198.044
284.177
Part nr.
FIA approved
284.092
Rear Foglamp
Reverse light
Water wetter
This super coolant helps control
overheating. Your car can
run up to 7°C. cooler.
355 ml.
Part nr.
086.604
Automatic battery
conditioner & tester
• Automatically recharges used battery cells • Suitable for all vehicle types:
cars, motorbike, boats, caravans... • Unique testing facility allowing
‘easy chek’ on battery capability and condition • L.E.D. monitoring display
system/battery status display • Permanent unsupervised use. Polarity warning
signal • Dimensions: 5X6X10cm, easy storage • Charges every 12 Volt battery
with a minimum of 13.2 Volts input can go up to a maximum of 13.8 Volts.
©
V a n
G e s t e l
B & C
2 0 0 5
Part nr.
132.646
Oil drip pan
Is useful to put under your lawn-mower, British bike
or even under your Classic car (1200 x 640 mm)
73
Lead replacement lubricants and oil
Part nr.
Competition
Valve Lubricant
For competition ONLY!
198.058
A truly effective lead replacement
valve lubricant for use in unleaded
petrol under race conditions.
Most classic racing cars (single seaters,
sports cars or racing saloons) need the
protection of lead for valve lubricant
to prevent exhaust valve recession.
This means it is not advisable to run
these race tuned cars on unleaded
petrol without risking severe valve
seat wear which will destroy the
engine. CVL uses proven, advanced
fuel additive technology to prevent
valve seat recession under high engine
loads, experienced in race conditions.
Part nr.
300.501
HPR 20W/60, 5L
A mineral oil formulated for most
post-war classics, particularly high performance
vehicles such as MG,Porsche, Jaguar and Triumph.
Suitable for cars running six volt electric systems,
where starter motor cranking speeds require
an engine to turn over with minimal
drag. Meets API SJ/CF.
Part nr.
VSP PLUS
Lead substitute &
octane booster
198.042
To be added to unleaded
fuel as a replacement for
4 star leaded petrol.
Most pre-1990 or classic cars have soft
4 valve seats in the engine wich means
they cannot run on unleaded petrol
without risking severe valve seat
wear wich could lead to further
significant engine damage.
VSP PLUS uses advanced
Manganese technology wich:
• protects against valve seat
recession • Boosts octane of
unleaded petrol typically back to
4 old star leaded levels • removes
the need to retard the ignition •
prevents pinking when using unleaded
fuel • tests on U.K. refinery fuels confirm an average increase of 2
octane numbers when added to unleaded fuel • OK for 40 L
Part nr.
200.758
Penrite
oil can, 1L
Castrol oil
Stickers
085.418 5” Stickers
085.381 10” Stickers
Part nr.
198.059
Valvemaster Plus
Castrol valvemaster is a phosphorous
based additive to enable you to use
unleaded petrol in your classic without
modifying the engines soft valve seats.
The formulation has a long history of use as a
lead replacement additive in North and South
America,Australia, New Zealand and Europe. Castrol
Valvemaster is endorsed by the Federation of British
Historic Vehicle Clubs (FBHVC) following the tests
developed by that independant body. Castrol are
confident that it can beused under all driving
conditions and that it is compatible with both LRP and
leaded fuel. Supplied in 250ml bottles, with a built in
measuring device. 10ml treats 10 litres of unleaded
giving you the flexibility to fill up with varying
quantities of fuel. Castrol Valvemaster Plus has
the addition of an octane booster to reduce pinking
or knocking in tuned or high compression engines
without the need to retune. • 250ml treats 250
litres of unleaded fuel • Ultimate protection against
valve seat recession • Provides an octane boost to
unleaded fuel, reducing knocking • Protects engine
under all driving conditions • Reduces the
need to re-tune • Keeps the fuel system clean and
provides excellent corrosion protection • OK for 40 L
74
Castrol oil
pourers
Part nr.
200.735 1 pint (0.568 Liters)
200.749 1 Quart (1.136 Liters)
300.522
Castrol Classic 20W/50
1 gallon 4.5 Liter
For pre - 1980 Modern Classic Cars,
Castrol Classic XL20W/50 is a low
detergent traditional multigrade
engine oil, ideally suited for older
technology modern classics.
©
V a n
G e s t e l
B & C
2 0 0 5
Auto glym & body care products
AUTOGLYM
Simply
outs tanding
Part nr.
Part nr.
198.061
Autoglym
gift pack
185.046
Connolly
hide care
Part°
Description
198.005
198.008
198.007
198.011
198.006
198.031
198.009
198.012
198.035
198.013
198.010
198.014
198.003
198.033
198.039
198.057
480ml car shampoo & conditioner
Cutting polish for badly damaged paint
Super resign polish
Extra gloss protection
Clean wheels
Instant tyre dressing
Bumper care (rubber)
Glass protection
Fast glass cleaner (spray)
Interior shampoo
Vinyl & rubber care
Instant tar remover
Chrome polish (tube 75gr.)
8 x polishing clothes
Leather care
Engine cleaner
Don’t let leather
dry out! Use this at
least once a year
Part nr.
185.351
Car duster
This 100% cotton dusting mop has been specially
treated to trap dust. Shake out and it’s
ready to use again.
DO NOT WASH
OUT
Part nr.
185.551
Connolly hide care kit
For cleaning and preserving
hides, upholstery
and all leather
clothing
Part nr.
198.060
Hydra blade
Effortless removal of shampoo rinse water
Part nr.
185.343
Car wash handshoe
The perfect cloth for washing your classical
Part nr.
185.334
Chamois
We offer only the best real natural chamois. These
are specially made for the car industry having larger
dimensions than most of them and are thick and
extremely soft. Approx. 40 x 62cm.
Made in England
of course.
Part nr.
185.335
The proffesional wringer
Heavy duty industrial quality
wringer for chamois, towels etc.
Specifications: Rustproof all steel frame, maintenance
free rollers and bearings, adjustable pressure over the
entire length of the rollers for uniform water removal.
The complete wringer machine has two strong clamps for easy attaching
©
V a n
G e s t e l
B & C
2 0 0 5
75
Jaguar & Union Jack accessories
Part nr.
Part nr.
185.751
Jaguar mug
Key
fob Daimler
185.605
Part nr.
Key
fob Jaguar
185.712
Part nr.
085.413
Jaguar sticker
10 x 4cm
Part nr.
085.357
Part nr.
185.756
Part nr.
Jaguar patch,
11 x 7cm
Jaguar soft adhesive badge, 27mm
185.736
Part nr.
Jaguar umbrella
Part nr.
Union Jack badge
185.002
Union Jack
with dummy screws
185.708
Quality chrome with jewellers enamel.
A masterpiece for your car. 34 x 57mm
Part nr.
Part nr.
162.405
161.054
Screw
Part nr.
185.199
Union Jack Flag,
70 X 100 cm
Part nr.
185.709
Union Jack
desk dressing
flag
If you don’t like to drill fixingholes,
you can tape this badge showing
screw heads. 34 x 57mm
Nut
Part nr.
185.753
Pair Union Jacks soft adhesive badges, 29 x 51mm
Part nr.
185.219
“Union Jack”on pin
Fine chrome & jewellers
enamel
Part nr.
085.149
Magnetic U.J.
For your car or as decoration & souvenir.
measurements: 90 x 55 mm
Part nr.
185.210
Key fob
Union
Jack
Part nr.
185.755
Chrome GB stick-on
Part nr.
085.362
Union Jack
soft adhesive
badge, 27mm dia.
76
Part nr.
085.157
Union Jack sticker
Part nr.
For your car or as decoration & souvenir.
measurements: 73 x 43 mm
185.174
Union Jack patch
52 x 78mm
©
V a n
G e s t e l
B & C
2 0 0 5
Rally instruments, tripmasters, warning lights and bucket seats
Part nr.
Part nr.
088.089
088.090
Baseplate
2 counters
Baseplate
1 counter
Part nr.
088.091
Clip
Part nr.
Part nr.
Mechanical
hour counter
088.087
088.088
Mechanical
Minute counter
Part nr.
088.092
Belmog “Hanhart” Rally chrono instruments
excellent chrono instruments with the following specifications:
(088.087) hour counter with 1/5 second recorder, 60 min. register,+ 10 hour, 60 second sweep,
jumping minute hand, pinlever, shock protected, 11 jewels, unbreakable spring, brass alloy case.
(088.088) minute counter with 1/5 second recorder, 60 min. register with coloured minute dial,
60 second sweep, flyback to zero and simultaneously restart, jumping minute hand, shock protected
and extended dust and water resistance, 7 jewels, brass alloy case.
Part nr.
Belmogtwin ‘R’
086.405
Belmogtwin MK II
Fully mechanic
distance recorder
A strong, reliable and fully mechanical odometer with two
counters. Registers hundreds of a km or a mile.
allowed for F.I.V.A & F.I.A. classic events.
5 mm digits are illuminated by a light
and enlarged by magnifying lenses.
Available in 6v and 12v. Instantaneous
zero setting. Setting knob for addition,
neutral and substracting. Figure counter
control and setting can be carried out for
both counters. Adjustment gear for very acurate
calibration. Supplied complete with fitting T-gear, drive
cable and circlips.
The perfect trip master
for professionals
and amateurs.
Approved for rallying &
racing. With handle to
control the counting;
forwards, backwards or
stop. Special knob to get back on
track when a mistake is made, also a knob
to temporarily stop recording when leaving the track
for the loo etc. After installation the distance recorder will need
calibrating to your car’s specifications . This can be achieved by testing the
distance over 1 km, and noting the difference on the recorder. The recorder must
then be returned for fine tuning.
Two & three hole mounting plates
Period reproduction mounting plates
Our mounting plates for warning lights & switches are made from polished stainless steel.
The lights & switches are easily installed as the holes are also the sleeves. The holes have a
diameter of 1/2”, there are also holes in
Part nr.
the top for mounting under
the dashboard.
135.755
Two hole mounting plate
Part nr.
083.815
Part nr.
Approved by many historic rallys. Easy calibration in miles & meters.
135.756
Warning lights
Three hole mounting plate
Part nr.
083.159
083.477
086.187
086.370
Green lens
Red lens
Amber lens
Blue lens
Warning lights
available in
four colours
These warning lights
have been specially chosen
to suit British dashboards &
fit in our mountng plates. Each light
contains a bulb and two lucar terminals
(earth & power).
Lever
These are leather trimmed to special
order and we can easily combine
our trim kits with these seats. The base
is made from strong reinforced fibreglass.
If you require tilting this seat we recommend to fit MG T type seat sides to the seat frame. Needs
some modification. SEATS ARE MADE AT SPECIAL ORDER, ask your local salesman for details.
G e s t e l
Description
088.388
Pair trimmed
bucket seats
V a n
Part nr.
Part nr.
158.329
©
Retro Trip
The precision
distance recorder.
B & C
2 0 0 5
J ust snap of the existing
lever with pliers and mount
these lever over the existing
metal pin with a good
adhesive
• 086.899
6 piece lever set
Part nr.
Part nr.
083.088
083.084
On-Off switch
Please note to use relays
from 50 watts onwards.
Lighting switch
Three positions: off,
side light & head light
77
“Original Series” books and digital manuals
Part nr.
Part nr.
190.561
190.540
Original
Jaguar E-Type
Original
Jaguar MKI, MKII
(by Nigel Thorley)
The Jaguar MKI, MKII range encompassed
2.4 and 3.4 litre Mark 1 saloons, 2.4,
3.4 and 3.8 litre Mark 2, 240 and 340,
Daimler V8 2.1.2 litre and V8 250, all
difficult and costly cars to restore, making
it essential to get it right first time. Hardback, 295 X 225 MM,
96 pages with 150 colour pictures
(by Philip Porter)
Here is the evidence of what constitutes an
authentic Jaguar E-Type, whether Roadster,
coupé or 2+2, from early 3.8 litre to late
5.3 litre V12, featuring twelve cars either
in remarkable original condition or restored
with fastidious attention to originality.
Hardback, 295 X 225 MM,
Part nr.
Part nr.
190.560
190.562
Original
Jaguar XK
Original
Jaguar XJ
(by Philip Porter)
A complete new edition of a
best-selling book first published
in 1988. New research has given
us much more knowledge of these
immortal sports cars. Eight XK experts
have read it and offered additions. Hardback, 295 X 225 MM, 144 pages
with 250 colour pictures
(by Nigel Thorley)
A detailed production history of the
6-cylinder and V12 Jaguar and Daimler XJ
models. The evolution of this large range
is described, with details of differences
between models, production changes, etc.., and specially commissioned colour
photographs. Hardback, 295 X 225 MM,
Jaguar Classic Parts Original edition publications
CD Rom Range
Description & contents
Part nr
Parts & Service Publications
Jaguar Saloons 1936-1970
• SS and Jaguar Saloons - 1936 to 1948
• MKI & II incl. 240 & 340 - 1955 to 1969
• MK X, 420G, S-type & 420 - 1961 to 1970
192.027
192.028
192.029
XJ Saloons 1969-1992
• XJ6 & Daimler Sovereign Series 1 & 2 - 1968 to 1979
• XJ12 & Daimler Double-six Series 1 & 2 - 1972 to 1979
• XJ6 & Daimler Sovereign Series 3 - 1979 to 1987
• XJ12 & Daimler Double-six Series 3 - 1979 to 1992
192.030
192.031
192.032
192.033
Jaguar sports cars 1948-1994 (except XJS)
• XK120, 140, 150 & 150 ‘S’ - 1948 to 1961
• E-type Series 1 & 2 - 1961 to 1970
• E-type Series 3 - 1971 to 1974
• XJ220 - 1991 to 1994
192.034
192.035
192.036
192.037
XJS sports cars 1975-1996
• XJ-S 5.3 Litre - 1975 to 1991
• XJ-S 3.6 Litre - 1982 to 1991
• XJS 4.0 Litre - 1991to1996
• XJS 6.0 Litre - 1992 to 1996
• XJR (XJ40) & XJR-S (XJ-S) - 1988 to 1993
192.038
192.040
192.039
192.041
192.042
XJ6 (XJ40) & XJ12 (XJ81) 1987 to 1994
• XJ6 (XJ40) 2.9 Litre - 1987 to 1990
• XJ6 (XJ40) 3.6 Litre - 1987 to 1989
• XJ6 (XJ40) 3.2 Litre - 1991 to 1994
• XJ6 (XJ40) 4.0 Litre - 1990 to 1994
• XJ12 (XJ81) 6.0 Litre - 1993.25 to 1194
192.043
192.044
192.045
192.046
192.047
XJ6 (X300) & XJ12 (X300) 1995 to 1997
• XJ6 (X300) 4.0 Litre - 1995 to 1997
• XJ6 (X300) 3.2 Litre - 1995 to 1997
• XJR (X300) 4.0 litre Supercharged - 1995 to 1997
• XJ12 (X300) 6.0 Litre - 1995 to 1997
192.048
192.049
192.050
192.051
Daimler Models 1953 to 1992
• Daimler V8: 250 and SP250 (Dart) - 1956 to 1969
• Daimler Conquest, Century, Majestic &
Majestic Major - 1953 to 1968
• Damler DS420 Limousine - 1968 to 1992
78
Description & contents
Part nr
Supplementary Model & Service Information
• Jaguar & Daimler models (excl. XJ Saloons) - 1930 to 1974
• XJ6 & XJ12 Series 1, 2 & 3 - 1968 to 1992
• XJS - 1975 to 1996
• XJ6 (XJ40) & XJ12 (XJ81) - 1987 to 1994
• XJ6 (X300) & XJ12 (X300) - 1995 to 1997
• XJ8 & XJR - 1998 to 2002
• XK8 & XKR - 1997 to 2003
192.055
192.056
192.057
192.058
192.059
192.060
192.061
Parts & Service Bulletins
• Volume 1: parts 1959 to ‘68, service 1946 to ‘68
192.062
192.063
192.064
System Diagrams & Electrical Data
• Volume 1: Jaguar & SS Saloons - 1933 to 1992 (except XJ40) 192.065
Jaguar Sports cars - 1948 to 1974 & Daimler Variants
• Volume 2: Jaguar Sports cars - 1975 to 2004,
192.066
Jaguar Saloons - 1988 to 2002 (except XJ12 Series 3)
Owners Literature
• Volume 1: Jaguar & SS Saloons - 1933 to 1992 (except XJ40) 192.067
Jaguar Sports cars - 1948 to 1974 & Daimler Variants
• Volume 2: Jaguar Sports cars - 1975 to 2004,
192.068
Jaguar Saloons - 1987 to 2002 (except XJ12 Series 3)
This market leading, cost-effective range of electronically
published technical information - few manufacturers other
than Jaguar come close to providing the owner with such a
comprehensive back-catalogue of manuals and documents
- may be subdivided into three complementary subject
groups: Parts and Service Publications, Supplementary
Model and Service Information and Parts and Service
Bulletins.
Historically, significant amounts of valuable service
information were never incorporated into updated service
manuals, and only by also studying the supplementary
information and bulletin CDs can these information gaps
be bridged. One example of this is the non-appearance of
the AJ16 engine in XJS service manuals; another is the
dividing out of electrical and electronic information for the
increasingly complex later models into guides published
separately from the service manuals.
It is therefore highly recommended that owners seek to
acquire CDs covering all three of the aforementioned
subjects to ensure they have as much information as
necessary to effectively service their Jaguar or Daimler
motor car.
192.052
192.053
192.054
©
V a n
G e s t e l
B & C
2 0 0 5
Factory workshop manuals
190.564 Jaguar XK 120, 140, 150, 150S & MK VII, VIII & IX
Official service manual 190.622 Jaguar MK II Official Service Manual
Massive publication compiled from 9 different previous official manuals,
784 pages, photos, drawings, wiring diagrams etc.., softbound
190.623
Information on maintenance , repair and servicing procedure,
364 pages, fully illustrated, softbound
Jaguar MK X (3.8 & 4.2) and 420G
Official service manual 4th. edition covering all 2.4, 3.4, 3.8, 240 & 340 models,
545 pages, drawings, softbound
190.624 Jaguar S-Type, 3.4, 3.8 Workshop Maual Repair and service procedures for all components,
280 pages, fully illustrated with drawings, softbound
190.625 Official Service Manual for Jaguar Automatic Transmission
Part 1 covers original transmission as fitted to the MK VII model, with supplement covering changes to MK VII & other later models up to MK X, but in all essential
details applies to other auto transmission units, i.e. 2.4, 3.4, 3.8, XK 140, XK 150,
MK VIII & MK IX. 154 pages, photos etc.., softbound
190.626
Jaguar E-Type 3.8 & 4.2 Series 1 & 2 Official Service Manual
Huge combined volume covering all components in detail
Approx. 800pages, photos, drawings, softbound
190.627 Jaguar E-Type V12 Series 3 Official Service Manual Huge combined volume covering all components in detail
Approx. 800pages, photos, drawings, softbound
190.628
200 pages, illustrated with photographs, charts & diagrams, softbound
Jaguar 420 Official Service Manual 190.629 Jaguar XJ6 Series 1, 2.8 & 4.2 litre
Includes routine maintenance, spe’s and full repair and service procedures for all Official Service Manual components. 570 pages, photos, drawings, softbound
190.630 Jaguar XJ6 Series 2 Official Service Manual
Information on maintenance, repair and servicing procedures
398 pages, illustrated with wiring diagrams, softbound
190.631 Jaguar XJ12 Series 1 Official Repair Operation Manual
All repair and service procedures are covered in detail
450 pages, drawings, diagrams, softbound
190.632
Detailed specs., repair and maintenance instructions, 360 pages, drawings, softbound
Jaguar XJ12 Series 2 Official Repair Operation Manual
190.633 Jaguar XJ6/XJ12 Series 3 Official Service Manual
Maintenance and repair of all components, in immense detail
190.634 Jaguar XJ6 (XJ40) Owners Workshop Manual Covers all 2.9, 3.2, 3.6, and 4.0 litre Jaguar & Daimler saloons from1986 to 1994
190 pages, fully comprehensive with over 280 ill., plus fold-out wiring diagrams & full specs. softbound
190.635 Jaguar XJ-S 3.6 & 4.0 Official Service Manual
This manual covers all 6-cylinder powered XJS models - XJS 3.6, XJSC 3.6 and 4.0
The supplement covers later vehicles, mainly dealing with those modifications
brought about in line with the introduction or automatic transmission, 4 litre engine and related systems, ABS brake systems, body modifications and more
648 pages with many illustrations, softbound
190.636 Jaguar XJS Official Repair Operation Manual
Comprehensive instructions covering all components, with new 168 page 6.0 litre incorporating HE, 5.3 & 6.0 litre supplements. Softbound.
©
V a n
G e s t e l
B & C
2 0 0 5
79
Factory parts catalogues
190.637
Jaguar Mark 2, 3.4, 3.8 & 340 Official Spare Parts Catalogue
All parts identified and numbered and many illustrated
514 pages, drawings, hardbound
190.638 Jaguar S-Type Parts Catalogue Covers 3.4 & 3.8 models
190.639 Jaguar 3.8 E-Type Official Spare Parts Catalogue Covers 3.8 litre open and FHC models
334 pages, fully illustrated with drawings & diagrams, softbound
190.640
Jaguar E-Type Series 1, 4.2 litre Official Parts Catalogue
190.641 Jaguar E-Type Series 2 Official Parts Catalogue Covers Fixed Head Coupé, 2+2 models Contains illustrations from parts catalogue J37 & J38. 296 pages softbound
190.642
Jaguar E-Type V12 Series 3 Open 2 Seater Official Parts Catalogue
All parts illustrated and numbered
190.643
Jaguar XJ6 Series 1 Official Parts Catalogue 186 pages, exploded views etc.., softbound
190.644
Jaguar XJ6 Series 2 Official Parts Catalogue Approx. 400 pages with drawings etc.., softbound
190.406
Jaguar XJ6 & Daimler Sovereign Series 3 Parts Catalogue
Covers models up to August 1985 inc. Daimler Sovereign
354 pages, many drawings, diagrams, softbound
190.472
Jaguar XJ12 Parts Catalogue
249 pages, factory drawings, softbound
190.645 Jaguar XJ6 (XJ40) Official Parts Catalogue Covers 2.9 & 3.6 litre saloons up to 1989
236 pages with many drawings, illustrations, diagrams, softbound
190.646 Jaguar XJ-S Range Official Parts Catalogue All parts numbered and identified with many illustrations
Covers 6 cylinder 3.6 and 12 cylinder, 5.3 engines from Jan. 1987 to ‘91
316 pages with drawings, diagrams, softbound
80
©
V a n
G e s t e l
B & C
2 0 0 5
Factory owners handbooks
190.565 Jaguar XK120 Official Owners’ Handbook Controls and instruments, servicing, routine maintenance etc..
72 pages with drawings, softbound
190.566 Jaguar XK140 Official Owners’ Handbook
Operating maintenance and servicing instructions for open two-seater,
fixed head coupé, drophead coupé. 72 pages with drawings, softbound
190.567 Jaguar XK150 Official Owners’ Handbook Operating maintenance and servicing instructions
190.647 Jaguar MK II (3.4 litre) Official Handbook Operating maintenance and servicing instructions
86 pages, softbound
190.648 Jaguar MK II (3.8 litre) Official Handbook All info for operating, routine maintenance & service
84 pages with photos, drawings, softbound
190.649 Jaguar E-Type tuning & preparation for competition use
Official Jaguar booklet on how to improve performance for racing
24 pages with illustrations, softbound
190.650 Jaguar E-Type 3.8 Official Owners’ Handbook Essential guidance on operating, routine maintenance & service
190.651
Jaguar E-Type Series 1, 4.2 & 2+2 Official Handbook
All information for the satisfactory operation, maintenance, servicing of these
models. 81 pages with drawings, softbound
190.652
Jaguar E-Type 4.2 litre Series 2
Official Handbook
Operating, maintenance, servicing
190.653
Jaguar E-Type Series 3, V12 Official Handbook
Provides all the information required for operation and maintenance
190.654
Jaguar E-Type Series 3, V12 (US) (US)
Official Owners’ Handbook
Operating instructions routine maintenance, service instructions,
North American specs. 100 pages with drawings, softbound
190.655 Jaguar XJ6 3.4 & 4.2 Series 2 Official Handbook
Instructions for operating and maintenance (plus wiring diagrams) for the 4-door saloon. 62 pages, softbound
190.656 Jaguar XJ6C Series 2 Official Handbook General data, care and maintenance instructions for all components
62 pages (plus wiring diagrams), softbound
190.658 Jaguar XJ12 Series 3 Official Handbook
Identification, specs all components, bodywork care, fuel consumption
70 pages with drawings
190.659 Jaguar XJ12 Series 3 Official Owners’ Handbook General information, controls, components, care of bodywork
64 pages with photos, hardbound
190.660 Jaguar XJS (US) Official Owners’ Handbook General data, instruments, operating, emission control, maintenance etc..
©
V a n
G e s t e l
B & C
2 0 0 5
81
Haynes manuals & Tool catalogue
Haynes Manuals
The clear, step-by-step illustrated instructions cover the dismantling, inspection, repair and refitting of
the engine, cooling system, fuel and emission control systems, exhaust, ignition system, clutch, manual
gearbox, propeller shaft or drive shafts, braking system… These manuals are based on a complete
stripdown and rebuild. Manuals are hardback, 570 X 210 mm, B&W illustrations
Part nr.
Jaguar Saloons
MKI, MKII 240 & 340
190.692
Part nr.
Haynes XJ
Restoration Manual
190.727
(by Dave Pollard)
An essiential reference for anyone considering a
restoration of a XJ6. Covers series I, II, III from 1969 to
1986. Shows you how to repair, strip down, rebuild and
tune your XJ. With tips on what to look for when buying
a used XJ6. Hardback, 270 X 210 MM, 216 pages
with 900 B&W illustrations.
Part nr.
Jaguar XJ6, XJ &
Sovereign, Daimler Sovereign
1968-’86
190.496
Part nr.
Jaguar XJ6 & Sovereign,
service and repair manual, 1986-’94
190.508
Part nr.
British parts,
tools & accessories catalogue
190.058
This is THE catalogue for all “British Classic Car” owners.
This full colour catalogue counting more than 130 pages is
absolutely packed with parts and accessories: Screws, bolts
and kits, fasteners, plugs, connectors, pipes, tubes, seals,
clamps, filters, grommets, spanners, screwdrivers, pliers,
engine tools, interiors, bodywork and electricity, lights
& lamps, mirrors, badges, fuel caps and pumps, straps,
safety belts, wipers, safety products, cleaning products,
gloves, clothes, caps, helmets, oil and oil based products,
steering wheels, wire wheels, spinners, hubs, stickers and
lots more. It’s impossible to mention how much you will
find in this catalogue so there’s only one thing to do: get
one as quickly as possible from your Anglo-Parts dealer.
82
Part nr.
Jaguar XJ12, XJS &
Sovereign Daimler Double Six
190.497
Part nr.
E-Type, 6 cylinders
workshop manual Haynes
190.689
©
V a n
G e s t e l
B & C
2 0 0 5
Jaguar MKI, II series & XJ series books....
Part nr.
190.722
Jaguar MKI & II with 240, 340
& Daimler derivatives
(by James Tailor)
The compact jaguars were unique cars,
combining the sporting qualities for which
Jaguar were renowned with the elegance
and comfort of the larger saloons.
This book tells the story, from their
introduction in 1955 to their final
demise in 1969. Incudes development,
competition fortunes, full specifications
and advice on buying..
Hardback, 250 X 195 MM, 198 pages
with many B&W and colour illustrations.
Part nr.
Part nr.
Jaguar XJ,
the complete companion
Jaguar MKI/II Haynes Great Car Series
Years of research and a lifetime’s experience of
owning and restoring the Jaguar XK have gone into
this detailed study of Series 1, 2 and 3 XJ saloons
and coupes, from the first XJ6 built in 1968 to the
last Serie 3 V12.
Paperback, 260 X 190 MM,
176 pages, many B&W and colour illustrations.
The Jaguar MKI/II is arguably the most famous and instantly
recognisable saloon produced by Jaguar to date. Inside you will find
a well documented history of the car, incl. it’s extensive use by British
Police forces and crooks alike. This beautifully produced book will appeal
to all fans of British cars as well as to Jaguar owners and enthusiasts.
with 250 B&W and colour illustrations.
190.728
190.324
(by Nigel Thorley)
(by Nigel Thorley)
Part nr.
You & your
Jaguar XJS, buying,
enjoying, maintaining
and modifying
190.605
(by Nigel Thorley)
The Jaguar XJ was one of the finest grand touring cars
of its era. It survived the British Leyland days, Jaguar’s
privatisation and the takeover by Ford and it was still
very much in demand even before its replacement, the
XK8, came on to the scene in 1996. This colour book,
which covers the full road car and competition history,
will fascinate all Jaguar enthusiasts. Hardback, 270 X
210 MM, 160 pages with 175 illustrations, mainly colour
Part nr.
190.737
You & your Jaguar XJ40,
buying, enjoying, maintaining
and modifying
(by Nigel Thorley)
Part nr.
190.778
S-Type 3.4 & 3.8
Italian Workshop Manual
Limited Stock
©
V a n
G e s t e l
B & C
2 0 0 5
The XJ40, mainstay of Jaguar production from 1986
to 1994, was the last saloon in which Sir William Lyons had
any style involvement. It broke new ground with it’s technical
sophistication and reintroduced the marque to a younger
buying public. Today the XJ40 - more reliable and economic to
buy and run - is an important ‘entry level’ model for first time
Jaguar buyers and has a large following.
with 175 illustrations, mainly colour
83
XK books & Jaguar buyer’s guide
Part nr.
190.621
The JaguarXKs
(by Paul Skilleter)
The Jaguar XK sports car continues to exert a very
great appeal to enthusiasts in all countries, this book
explains why the XK exerts this appeal and what it is
really to own and run an XK. All the pictures in this
book are from Jaguar’s own archives, except where
otherwise credited. Softback, 237 X 180 MM, 186
pages with B&W illustrations
Part nr.
Jaguar XK8,
the authorised biography
190.597
(by Philip Porter)
This is the full and exclusive story of the design,
development, engineering, testing and prodution of
Jaguar’s XK8. Top Jaguar author, Philip Porter, had the
backing of the company and full access to drawings,
records, photographs, cars and people involved of the
birth of this milestone.Hardback, 280 X 210 MM, 136
pages with 180 colour illustrations
Part nr.
Part nr.
190.563
Essential Jaguar XK,
XK 120/140/150
The cars and their story 1949-’61
(by Mike Lawrence)
Fifty years after their hasty development and launch, the
XK’s remain stronger as ever. Covers succeeding models
likethe C-Type, D-Type, XKS’s, analyzes their strenghts,
shortcomings, and motorsport histories, as well as the
practicality of owning an XK. Paperback, 260 X 210 MM,
80 pages with 60 colour & 60 B&W illustrations
190.601
Jaguar illustrated
Buyer’s Guide
(by Michael Cook)
This new edition covers all models starting
pre-WWII and continuing through the most
current models. Includes specifications and
production figures, value rating guide and
investment information. Provides good
history and identification of each vehicle.
Paperback, 237 X 189 MM, 160 pages
with 200 B&W illustrations
Part nr.
190.586
How to power tune
Jaguar XK engines
(by Des Hammill)
All you need to know about getting
maximum performance with reliability
from the famous Jaguar XK 6-cylinder
engine. A book packed with easily
understood and down to earth advice
based on the author’s many years on
hands-on experience. Softback, 250 X
207 MM, 112 pages with c. 200 B&W
pictures
84
Part nr.
Jaguar XK engine,
history, rebuilding, uprating
190.607
(by Dave Pollard)
The legendary 6-cylinder XK engine was fitted to Jaguars for around
30 years, incl. theMK VII, D-Type, E-Type and XK 150. Between the
mid- 1950s and mid- 1980s some 700.000 units were manufactured. It
still ranks as one of the most famous British engines and has been used as
the power plant in a number of ‘specials’ and kit cars. This fully illustrated
bookincludes the history of the engine, its applications on buying,
rebuilding, and tuning from mild to race special. Hardback, 270 X 210
MM, 192 pages with 360 illustrations
©
V a n
G e s t e l
B & C
2 0 0 5
E-Type books and CD’s
Part nr.
190.589
E-Type: End of an Era
(by Chris Harvey)
This book has been re-issued to satisfy a
continuing demand. It provides a wealth of
technical information with a fully illustrated
history, anecdotes, practical tips and compulsive
reading in the form of contemporary and road
testers’ reports. There is also advice on what to
look for when buying an E-Type, its strengths &
weaknesses, hints on restoration and on preparing
a car for competition and fascinating information
on the competition successes and the men behind
the cars. Hardback 250 X 207 MM, 260 pages
with 193 B&W and colour photographs
Part nr.
Part nr.
190.590
Jaguar E-Type, A celebration
of the world’s favourite ‘60s icon
190.599
The E-type story,
part I on CD-rom
(by Nigel Thorley)
(by Philip Porter)
This great car, the Jaguar E-Type, is produced from 1961-1974
and even today is instantly recognisable by people of all
agesand is one of the best known icons of the 60s. Published to
coincide with the 40th anniversary of the E-Type that has been
celebrated worldwide in 2001. Hardback, 250 X 250 MM,
160 pages with 250 B&W and colour illustrations.
The Jaguar E-Type story is as exiting as the car itself, and
there are few cars more exiting than the E-Type. Still loved
by millions, the E-Type made a unique impact in 1961,
becoming an icon of the swinging sixties, fast , beautiful,
sexy, innovative,and affordable. On this CD-rom you
can watch period film and dramatic top gear video, view
archive pictures and so much more. The E-Type story part I
traces the background and the story of the 3.8 E-Types.
Part nr.
190.595
Jaguar E-Type
(by Matthew L. Stone)
Color history of Jaguars most loved car, the sexy and
elegant E-Type. These coupes and convertables are as
attractive today as they were when introduced in the
1960s. Jaguar E-Type covers all versions, Series 1,
1.1.2, 2, 3 and 2 + 2. Discusses E-Type roots in the XK
Series, D-Type, XK-SS, etc., racing, technical evolution and
company history. Includes sidebars on E-Types in movies
and TV, driving impressions, vintage racing, Lister Jags and
more. Historical B&W photography of Jags on the track
and in factory promotional shots. With new photography of
restored and original Jaguars. Paperback, 270 X 212 MM,
128 pages with 90 colour and 40 B&W illustrations
Part nr.
Jaguar E-Type,
A definitive history
190.600
Part nr.
190.594
Jaguar E-Type
3.8 & 4.2, 6-cylinder & 5.3 V12
(by Denis Jenkinson)
This book contains not only an absorbing examination
of a very desirable automobile,but a fascinating
glimpse into the design and manufacturing processes
of another era. A special colour section makes this
book a handsome and thoroughly entertaining volume.
Paperback, 210 X 184 MM, 184 pages,
130 B&W and 24 colour illustrations
©
V a n
G e s t e l
B & C
2 0 0 5
(by Philip Porter, foreword by
Briggs Cuningham)
The Jaguar E-Type is probably the most famous
and certainly one of the best-loved sports cars of
all time. When it first appeared in 1961 it was
seen as a giant step forward in design, offering
amazing performance with relative sophistication
and all clothed in a sensational body of timeless
beauty. Now re-issued, this classic awardwinning book is the result of an unrivalled
depth of research and presents a fascinating
and comprehensive history of this great car.
Hardback, 270 X 210 MM, 712 pages with 700
illustrations incl. colour
85
Jaguar history books
Part nr.
190.592
Jaguar
(by John Heilig)
This is a colourful overview of more than 50 years of Jaguar
cars, with a focus on the most collectible and desirable cars
built after WWII. Jaguar books prove to be popular, not only
for those fortunate enough to own these remarkable cars, but
also for sports car enthusiasts who simply appreciate Jaguar’s
exquisite styling and outstanding performance. Cars covered
in this book include those built prior to WWII, the extremely
popular XK E-Type and XK Series cars, and the impressive new
XK8, which has graced the covers of automotive magazines
worldwide in the past year. Paperback, 230 X 230 MM, 96
pages with 80 colour illustrations
Part nr.
190.598
Part nr.
Jaguar, speed and style
Jaguar,
the complete
illustrated history
190.322
(by Martin Buckley)
This book, beautifully styled like the big cats themselves, is a
must-have purchase for all Jaguar enthusiasts. A brief historical
overview followed by authoritative descriptions of the cars
from the XK120 of 1948 to today’s S & X-types. With technical
specifications, driving impressions and buying hints. An absolute
feast of information. Hardback, 270 X 210 MM, 176 pages with
140 mainly colour illustrations.
(by Philip Porter)
Part nr.
This comprehensive history traces the development
of the Jaguar company from its humble beginnings
through the latest XJ6 models and the radical
change in its fortunes since the Ford takeover
and subsequent massive injection of capital. This
distinctive large-format book is a classic work of
reference, describing and illustrating virtually every
model produced. Hardback, 275 X 216 MM, 216
pages with 350 illustrations
Jaguar,
the complete works
190.593
(by Nigel Thorley)
Detailed and illustrated profiles of
all SS and Jaguar models from the
1931 SS1 to the latest Jaguar X-300
saloons, offering history descriptions,
specs, performance data and
production figures. All Jaguar-built
Daimlers are also included. Hardback,
280 X 210 MM, 160 pages with 90
colour and 150 B&W illustrations
Part nr.
190.591
Jaguar
Part nr.
190.733
Sir William Lyons
The official biography
(by Philip Porter & Paul Skilleter)
This book describes Lyons’s early influences
and how, while in his 30’s, he established a
substantial motor manufacturing business.
decades of glory followed by a period of
dispair. By the time of his death in 1985 he
knew that the company was on astrong path
to recovery. Hardback, 234 X 156 MM, 296
pages with 86 illustrations.
(by Nigel Thorley)
Jaguar is one of the most distinguished
and exciting car-makers in the world. This
full pictorial history shows the company’s
evolution from building motorcycle sidecars
in the 1920s to producing the luxury saloons
and sportcars of today. This book also covers
Daimlers which were produced by Jaguar
from 1960. Models featured include the XK
120, XK 150, the D-Type, the E-Type, the
Mark 2, the XJ6 and the XK8. This popular
account will be essential reading for Jaguar
ownersand enthusiasts, and for all those
with a keen interest in motoring history.
Paperback, 244 X 172 MM, 160 pages with
250 B&W illustrations
86
Part nr.
Jaguar
All the cars
190.734
(by Nigel Thorley)
This extensively researched guide
provides exhaustive reference detail for
all post-war Jaguar models. Information
provided includes technical specifications,
production cahnges, chassis numbers,
production numbers, colour schemes etc.
Each model is dealt with in a seperate
chapter with clear tabular information.
Hardback, 233 X 169 MM, 256 pages with
400 colour illustrations.
©
V a n
G e s t e l
B & C
2 0 0 5
DOWNLOAD OUR OTHER ANGLO PARTS
& ACCESSORIES CATALOGUES FOR FREE!
download the pdf versions of our catalogues for free
a t w w w. a n g l o p a r t s . c o m o r b u y t h e m f o r 1 0 e u r o s p e r i t e m .
MGTC
part n° 190.275
4
Sprite-Midget 1958-’6
part n° 190.504
Triumph TR2-4A
part n° 190.243
Jaguar XK120-150
part n° 190.694
MGTD-TF
part n° 190.067
0
Sprite-Midget 1965-’8
part n° 190.518
Triumph TR5-250-6
part n° 190.273
V8
Jaguar MKII-Daimler
part n° 190.721
MGA
part n° 190.001
A.H. 100/4-3000
part n° 190.509
Mini 1969-2000
part n° 190.720
Triumph Spitfire
part n° 190.133
Jaguar E-type
part n° 190.695
MGC
part n° 190.158
MGB
part n° 190.002
MGF-TF 1996-2005
part n° 190.519
er 90-110
Land Rover Defend
1984-2006
part n° 190.779
Triumph GT6
part n° 190.863
Morris Minor
part n° 190.718
II, III
Jaguar XJ, Series I,
part n° 190.780
& Accessories
British Parts, Tools
part n° 190.058
© A n g l o P a r t s n v 2 0 1 5 Quality Parts & Service
240 & 340 • 1959-’69 - V8 & V8 250 • 1962-’69
www.angloparts.com
please visit our website for all contact information
Anglo Parts Shops
MAIN BRANCH BELGIUM
HOLLAND • ITALY • GERMANY
Authorized Anglo Parts Dealers
FRANCE • HOLLAND • SPAIN
SWEDEN • FINLAND
CZECH REPUBLIC • SLOVAKIA
LUXEMBOURG • POLAND • HUNGARY
S e c o n d E d i t i o n • 1 9 0 . 7 2 1 Quality Parts & Service

PRINT THIS PAGE!

Transcription

Similar documents

Zubehör / Accesories

SDS 350/92 Schubboden 3-Axle semi-trailer »Power

MGC cat. 2005.indd

research to business

Andes 2 3 Aufbauanleitung Seite1

PDF catalogue : MGTD-TF 1949-1955

HYUNDAI i30

ch. giannoulis sa ch. giannoulis sa - Processing and exporting olive

Bedienungsanleitung - Migros

Spare Parts - 2009

engine s5-gs

ECO BIKE BAOTIAN

lookKIT - Das Magazin für Forschung, Lehre, Innovation - KIT

Holzidee 13

trends 04.2015

Englisch-Abschlussarbeit-Spring and Easter

SPORTSTER® - Harley-Davidson Onlineshop

(RNA) zum - TiHo Bibliothek elib

AustinHealey Titel/Zoll 09/99

Technisches Handbuch.indd