docMaschinenpark ROBERT NYBLAD GmbH 140917-GB
download 
Report Transcription
Maschinenpark ROBERT NYBLAD GmbH 140917-GB
● Papiermaschinen ● Sondermaschinen ● Stahlwasserbau ● Stahlbau / Maschinenbau ● mechanische Bearbeitung Machinery ROBERT NYBLAD GmbH FPT MARX CNC floor type milling and boring centre autom. head changer milling head 0.0001° both axes automatic indexing longit. traverse vertical traverse cross traverse X = Y = Z = rotary sliding table plate traversing dist. payload max. 4,000 x 4,000 mm W= 2,500 mm 120t 150t CNC floor type milling and boring centre autom. head changer milling head 0.0001° both axes, automatic indexing longit. traverse vertical traverse cross traverse X = Y = Z = rotary sliding table plate traversing dist. payload max. 2,500 x 2,500 mm W= 2,000 mm 50t 150t. longit.traverse vertical traverse cross traverse spindle sleeve X Y Z W plate traversing dist. payload max. 2,250 x 2,250 mm W= 1,500 mm 15t 150t longit. traverse vertical traverse cross traverse X = Y = Z = table size Length: 10,000 mm Width: 1,350 mm bridge crane loads up to 20,000 mm 5,000 mm 1,500 mm FPT AREA bridge crane loads up to 12,000 mm 3,500 mm 1,500 mm Soraluce FRP-16000 CNC floor type milling and boring centre with milling ram and spindle sleeve Ø180 autom. head changer orthogonal milling head, 1° x 1° index position automatic indexing rotary sliding table bridge crane loads up to = = = = 16,000 mm 4,500 mm 1,900 mm 1,000 mm Soraluce SP-10000 CNC rigid bed type milling and boring centre orthogonal milling head, 1°x1° index position 8,500 mm 2,000 mm 1,500 mm external rotary table with NC-axis payload, max table size payload max. bridge crane loads up to Hauptwerk/Verwaltung Hauptkanal links 72 26871 Papenburg Telefon ++49/(0) 49 61 / 91 81-0 Telefax ++49/(0) 49 61 / 91 81-71 e-mail: [email protected] Werk II: Hansestraße 1 26871 Papenburg Telefon ++49/(0) 49 61 / 97 22-0 Telefax ++49/(0) 49 61 / 9722-58 5t / m² Ø630 mm 2,5t 30t Geschäftsführer: Carl Josef Ehrlich Registergericht Osnabrück HRB 121230 Steuer-Nr. 53/203/34431 Ust.-ldent.-Nr. DE 116964416 ● Papiermaschinen ● Sondermaschinen ● Stahlwasserbau ● Stahlbau / Maschinenbau ● mechanische Bearbeitung Soraluce TA-A 25 CNC bed type milling and boring centre longitudinal traverse vertical traverse cross traverse orthogonal milling head, 2,5°x2,5° table size index position external rotary table with NC-axis X = Y = Z = 2.500 mm 1.250 mm 1.200 mm length: 2.700 mm width: 1.200 mm payload, max table size payload max. 2.5t / m² Ø630 mm 2,5t 30t bridge crane loads up to CME MH400 CNC rigid bed type milling machine with milling ram milling head, swivelling 2.5°, both axes external rotary table with NC-axis longit. traverse vertical traverse cross traverse X = Y = Z = 4,000 mm 1,500 mm 1,200 mm table plate payload 4,000 x 1,200 mm 10t table plate payload, max. Ø1,200 mm longit. traverse vertical traverse cross traverse X = Y = Z = table plate payload 5,000 x 1,000 mm 10t 30t 5t 30t bridge crane loads up to Zayer KFU5000 CNC bed type milling machine with arm swivelling milling head rear level 1° index position front level, 2.5° index position bridge crane loads up to 4,700 mm 1,500 mm 1,500 mm Heyligenstaedt Typ 900 ESa/5000 CNC centre lathe longit. traverse Ø over bed Ø over carriage 5,000 mm 1,800 mm 1,500 mm payload between centres 8t 2 lathe steadies Hauptwerk/Verwaltung Hauptkanal links 72 26871 Papenburg Telefon ++49/(0) 49 61 / 91 81-0 Telefax ++49/(0) 49 61 / 91 81-71 e-mail: [email protected] Werk II: Hansestraße 1 26871 Papenburg Telefon ++49/(0) 49 61 / 97 22-0 Telefax ++49/(0) 49 61 / 9722-58 Geschäftsführer: Carl Josef Ehrlich Registergericht Osnabrück HRB 121230 Steuer-Nr. 53/203/34431 Ust.-ldent.-Nr. DE 116964416 ● Papiermaschinen ● Sondermaschinen ● Stahlwasserbau ● Stahlbau / Maschinenbau ● mechanische Bearbeitung Crawford Typ Swift CNC centre lathe 4 guiding ways machine longi. traverse Ø over bed Ø over carriage face plate Ø payload between centres 6,100 mm 2,500 mm 2,030 mm 1,800 mm 40t 4 lathe steadies Richards VTL 5 (verfügbar ab 12 / 2014) CNC vertical turning lathe max. swing Ø max. workpiece height max. workpiece height, flat RAM traverse face plate Ø 6.500 mm 3,040 mm 2,700 mm 1,525 mm 4,870 mm 50t max. workpiece weight Schiess Typ K300 CNC vertical turning lathe max. swing Ø max. workpiece height RAM traverse face plate Ø 3,300 mm 2,000 mm 1,100 mm 3,000 mm max. workpiece weight 10t max. swing Ø max. workpiece height RAM traverse Face plate Ø 1,800 mm 1,500 mm 800 mm 1,600 mm max. workpiece weight 10t Schiess Typ 18DE160 CNC vertical turret lathe Hauptwerk/Verwaltung Hauptkanal links 72 26871 Papenburg Telefon ++49/(0) 49 61 / 91 81-0 Telefax ++49/(0) 49 61 / 91 81-71 e-mail: [email protected] Werk II: Hansestraße 1 26871 Papenburg Telefon ++49/(0) 49 61 / 97 22-0 Telefax ++49/(0) 49 61 / 9722-58 Geschäftsführer: Carl Josef Ehrlich Registergericht Osnabrück HRB 121230 Steuer-Nr. 53/203/34431 Ust.-ldent.-Nr. DE 116964416
