Kleinserienfertigung hochfester Kunststoffbauteile

Kleinserienfertigung hochfester Kunststoffbauteile

L I T E R AT U R V E R Z E I C H N I S ■
Kleinserienfertigung hochfester Kunststoffbauteile
Kunststoffe 98 (2008) 5, S. 29–32
SÖREN GRIESSBACH
RALF LACH
WOLFGANG GRELLMANN
1
2
3
4
5
Sauer, A.: Optimierung der Bauteileigenschaften beim selektiven Lasersintern von Thermoplasten. Dissertation, Universität Duisburg-Essen.
Shaker-Verlag, Herzogenrath 2005
Caulfield, B.; McHugh, P. E.; Lohfeld, S.: Dependence of mechanical
properties of polyamide components on build parameters in the SLS
process. Journal of Materials Processing Technology 182/1-3 (2007),
S. 477–488
Chung, H.; Das, S.: Processing and
properties of glass bead particulatefilled functionally graded Nylon-11
composites produced by selective laser sintering. Materials Science and
Engineering A-Structural Materials
Properties Microstructure and Processing 437/2 (2006), S. 226–234
Ajoku, U.; Saleh, N.; Hopkinson, N.;
Hague, R.; Erasenthiran, P.: Investigating mechanical anisotropy and
end-of-vector effect in laser-sintered
nylon parts. Proceedings of the
Institution of Mechanical Engineers
Part B – Journal of Engineering
Manufacture 220/7 (2006), S. 1077–
1086
Gibson, I.; Dongping, S.: Material
properties and fabrication parameters in selective laser sintering process. Rapid Prototyping Journal 3/4
(1997), S. 129–136
Kunststoffe 5/2008
6
7
8
9
10
Zarringhalam, H.; Hopkinson, N.;
Kamperman, N. F.; de Vlieger, J. J.:
Effects of processing on microstructure and properties of SLS
Nylon 12. Materials Science and
Engineering A-Structural Materials
Properties Microstructure and Processing 435 (2006), S. 172–180
Gornet, T. J.; Davis, K. R.; Starr, T. L.;
Mulloy, K. M.: Characterization of
selective laser sintering materials to
determine process stability. In: Proceedings of the Solid Freeform
Fabrication Symposium on Characterization of Selective Laser Sintering Materials to Determine Process
Stability. University of Texas in Austin/USA, Austin 2002, S. 546–553
Zheng, H. Z.; Zhang, J.; Lu, S. Q.;
Wang, G. C.; Xu, Z. F.: Effect of coreshell composite particles on the sintering behavior and properties of
nano-Al2O3/polystyrene composite
prepared by SLS. Materials Letters
60/9-10 (2006), S. 1219–1223
Hon, K. K. B.; Gill, T. J.: Selective
laser sintering of SiC/polyamide
composites. CIRP Annals-Manufacturing Technology 52/1 (2003),
S. 173–176
Gill, T.; Hon, B.: Selective laser sintering of SiC/polyamide matrix
composites. In: Proceedings of the
Solid Freeform Fabrication Symposium on Characterization of Selective Laser Sintering Materials to
Determine Process Stability. University of Texas in Austin/USA, Austin 2002, S. 538–545
11
12
13
14
15
Ho, H. C. H.; Gibson, I.; Cheung, W.
L.: Effects of energy density on morphology and properties of selective
laser sintered polycarbonate, Journal of Materials Processing Technology 89–90 (1999), S. 204–210
Badrinarayan, B.; Barlow, J. W.: Effect of processing parameters in SLS
of metal-polymer powders. The
development of an SLS composite
(R) material. Proceedings of the Solid Freeform Fabrication Symposium. The University of Texas in Austin/USA, Austin 1995, S. 55–63
Grießbach, S.; Lach, R.; Grellmann,
W.: Einfluss der Materialzusammensetzung und Herstellungsbedingungen auf das Eigenschaftsprofil lasergesinterter PA 12-Materialien. In: Tagungsband 11. Tagung Problemseminar Deformation und
Bruchverhalten von Kunststoffen.
Martin-Luther-Universität HalleWittenberg, Merseburg 2007,
S. 272–275
Schmidt, M.; Pohle, D.; Rechtenwald, T.: Selective laser sintering of
PEEK. CIRP Annals-Manufacturing
Technology 56/1 (2007), S. 205–208
Ajoku, U.; Hopkinson, N.; Caine,
M.: Experimental measurement and
finite element modelling of the compressive properties of laser sintered
Nylon-12. Materials Science and
Engineering A-Structural Materials
Properties Microstructure and Processing 428/1-2 (2006), S. 211–216
1
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------© 2008 Carl Hanser Verlag, München www.kunststoffe.de/Kunststoffe-Archiv Nicht zur Verwendung in Intranet- und Internet-Angeboten sowie elektronischen Verteilern