8th International Conference on Flat Bottom Tanks

8th International Conference on Flat Bottom Tanks

Registration by Fax +49 89 5791-2833 or E-mail: [email protected]
and on www.tuev-sued.de/academy/congress
The conference
8th International Conference on Flat Bottom Tanks
The aim of the 8th International Conference on Flat bottom Tanks
is to prepare for the implementation of new rules and regulations,
as from 2015 additional requirements concerning pollution control
need to be considered. Planners and operators are faced by the
abolition of the existing technical rules for storage plants with
burnable liquids by the end of 2012, the new regulations on water
act, which will be implemented in 2013, and the current introduction of European standards.
November 6 – 7, 2012, Munich, Germany
Name and Title (if applicable)
First Name
Company
www.tuev-sued.de/academy/congress
Presentations with practical relevance from German and international speakers respond to these topics.
Department
VAT No. (mandatory for EU member states excl. Germany). This number should be used
for all services purchased from TÜV SÜD Akademie GmbH.
Participation fee
€ 850,– plus current VAT (if applicable)
Street
The registration fee includes conference documentation,
lunch and drinks during breaks as well as the evening event.
Country / Zip Code / City
International Conferences
Conference venue
Phone
Alte Kongresshalle
Theresienhöhe 15 · 80339 Munich, Germany
Yes, I hereby agree to receive further information via E-mail
via Phone
Note: According to Art. 28 BSDG (German Data Protection Act) you may withdraw your consent to
the use of your personal data for advertising purposes by TÜV SÜD Akademie GmbH informally, at
any time and free of charge. TÜV SÜD Akademie GmbH, AC-TuK, Westendstr. 160, 80339 Munich
(Germany); E-mail: [email protected]; Fax: +49 89 5791-2833.
Invoice address (if different from above):
Name / Company
Address
Registration fee: € 850,– plus current VAT (if applicable)
Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge.
In case of cancellation beyond this deadline and up to the third working day prior the event, 50 %
of the invoice amount is due for payment. In case of cancellation beyond this deadline or failure to
participate in the event, the full amount of the invoice shall be due. I accept changes in the
programme and the general terms and conditions of participation of TÜV SÜD Akademie GmbH.
Date
Signature
8th International Conference on
Flat Bottom Tanks
You will receive travel and hotel information
with the confirmation of your registration
Registration and information
TÜV SÜD Akademie GmbH
International Conferences
Susanne Hummler
Westendstraße 160
80339 Munich, Germany
Phone + 49 89 5791-2846
Fax + 49 89 5791-2833
[email protected]
November 6 – 7, 2012, Munich, Germany
Conference Chairman
Peter Szalata, TÜV SÜD Industrie Service GmbH, Munich
Supported by:
å 08-2012
E-mail
The conference addresses to
Chemical and mineral oil industry as well as energy provider
companies
Constructors of plants with flat bottom tanks
Manufacturers of flat bottom tanks
Specialized companies and suppliers for flat bottom tanks
Government agencies and associations responsible for environmental protection, prevention of water pollution and building
legislation
Experts
Interested companies have the
TÜV SÜD Industrie Service GmbH
TÜV SÜD Akademie GmbH
opportunity to present their products
and services in the exhibition which
will be held parallel to the conference.
Registration by Fax +49 89 5791-2833 or E-mail: [email protected]
and on www.tuev-sued.de/academy/congress
The conference
8th International Conference on Flat Bottom Tanks
The aim of the 8th International Conference on Flat bottom Tanks
is to prepare for the implementation of new rules and regulations,
as from 2015 additional requirements concerning pollution control
need to be considered. Planners and operators are faced by the
abolition of the existing technical rules for storage plants with
burnable liquids by the end of 2012, the new regulations on water
act, which will be implemented in 2013, and the current introduction of European standards.
November 6 – 7, 2012, Munich, Germany
Name and Title (if applicable)
First Name
Company
www.tuev-sued.de/academy/congress
Presentations with practical relevance from German and international speakers respond to these topics.
Department
VAT No. (mandatory for EU member states excl. Germany). This number should be used
for all services purchased from TÜV SÜD Akademie GmbH.
Participation fee
€ 850,– plus current VAT (if applicable)
Street
The registration fee includes conference documentation,
lunch and drinks during breaks as well as the evening event.
Country / Zip Code / City
International Conferences
Conference venue
Phone
Alte Kongresshalle
Theresienhöhe 15 · 80339 Munich, Germany
Yes, I hereby agree to receive further information via E-mail
via Phone
Note: According to Art. 28 BSDG (German Data Protection Act) you may withdraw your consent to
the use of your personal data for advertising purposes by TÜV SÜD Akademie GmbH informally, at
any time and free of charge. TÜV SÜD Akademie GmbH, AC-TuK, Westendstr. 160, 80339 Munich
(Germany); E-mail: [email protected]; Fax: +49 89 5791-2833.
Invoice address (if different from above):
Name / Company
Address
Registration fee: € 850,– plus current VAT (if applicable)
Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge.
In case of cancellation beyond this deadline and up to the third working day prior the event, 50 %
of the invoice amount is due for payment. In case of cancellation beyond this deadline or failure to
participate in the event, the full amount of the invoice shall be due. I accept changes in the
programme and the general terms and conditions of participation of TÜV SÜD Akademie GmbH.
Date
Signature
8th International Conference on
Flat Bottom Tanks
You will receive travel and hotel information
with the confirmation of your registration
Registration and information
TÜV SÜD Akademie GmbH
International Conferences
Susanne Hummler
Westendstraße 160
80339 Munich, Germany
Phone + 49 89 5791-2846
Fax + 49 89 5791-2833
[email protected]
November 6 – 7, 2012, Munich, Germany
Conference Chairman
Peter Szalata, TÜV SÜD Industrie Service GmbH, Munich
Supported by:
å 08-2012
E-mail
The conference addresses to
Chemical and mineral oil industry as well as energy provider
companies
Constructors of plants with flat bottom tanks
Manufacturers of flat bottom tanks
Specialized companies and suppliers for flat bottom tanks
Government agencies and associations responsible for environmental protection, prevention of water pollution and building
legislation
Experts
Interested companies have the
TÜV SÜD Industrie Service GmbH
TÜV SÜD Akademie GmbH
opportunity to present their products
and services in the exhibition which
will be held parallel to the conference.
Agenda on Tuesday, November 6, 2012
9:30
9:45
Welcome
Winfried Schock, TÜV SÜD Industrie Service GmbH,
Munich, DE
10:45
14:00
Introduction
Peter Szalata, TÜV SÜD Industrie Service GmbH,
Munich, DE
Emission Reduction and Control – Standards, Activities
and Experience Reports
10:15
Agenda on Wednesday, November 7, 2012
The amendment of the 20th German Federal Emission
Protection Directive (BImschV), legal immission control
requirements for storage tanks with gasoline, blended
fuels and naphtha
Karen Pannier, Umweltbundesamt, Dessau, DE
Detection methods for product emissions and odorours
substances
Norbert Botz, BAYERNOIL Raffineriegesellschaft mbH,
Neustadt, DE
14:30
The United States Environmental Protection Agency's Oil
Spill Prevention Program and regulations for aboveground
storage tanks
Mark W. Howard, U.S. Environmental Protection Agency's
(USEPA), Wahington, DC, USA (inquired)
Overview of the legislation and standards in Slovenia
regarding flat bottom tanks planing and construction
Ales Povse, Petrol, Ljubljana, SLO
Coffee break
11:15
Coffee break
16:15
11:45
Alternative emission reduction methods at storage tanks
with volatile hydrocarbons
Thomas Schirmer, Ingenieurbüro Imhof GmbH,
Mühlheim am Main, DE
Inspection and maintenance according to EEMUA 159
guideline
Jan de Jong, D&C engineering, Alblasserdam, NL,
Chairman of EEMUA Storage Tank Committee
12:45
Lunch
9:00
9:30
15:00
15:30
Vapour reduction by the use of full contact and/or
pontoon type internal floating roofs and aluminium
domes – international experience
Mario Strache, Elsont Group, Storage Tank Equipment,
Buochs, CH
8:30
Federal standard ordinance on facilities for handling
substances hazardous to water – current state
Thomas Wagner, Bayerisches Landesamt für Umwelt,
Augsburg, DE
New Challanges
11:50
The latest revision of EN 14015
Jan de Jong, D&C engineering, Alblasserdam, NL
12:05
Seismic design: application of Eurocodes to storage
tanks for liquefied gases according to EN 14620
Richard Albert, Aachen, DE
12:30
Lunch
13:45
References to the seismic calculation and structural
design of cylindrical flat bottom tanks
Dr. Burkhard Hänelt, Ingenieurbüro Dr. Hänelt + Dr. Münzer,
Bad Bramstedt, DE
14:15
Performance-based seismic design of tanks with
Energy-Dissipating Anchors
Dr. Praveen K. Malhotra, P.E., StrongMotions Inc.,
Sharon, MA, USA
14:45
Lightning and static protection for above ground storage
tanks
Bruce Kaiser, Ligtning Master Corporation,
Clearwater, FL, USA
15:05
Faom agents for E10 fire fighting and for foam-systems
conform with EN 13 565-2
Martin Gorski, Fabrik chemischer Präparate von
Dr. Richard Sthamer GmbH & Co.KG, Hannover, DE
15:30
Outlook and farewell
Peter Szalata, TÜV SÜD Industrie Service GmbH,
Munich, DE
International Requirements for Construction and
Operation of Flat Bottom Storage Tanks
Influence of venting technology on emission reduction
Michael Davies, Braunschweiger Flammenfilter GmbH, DE
12:15
Tank Farm Design and Organisational Responsibilities
17:00
10:00
Coffee break
11:00
Fires and explosions at bulk petroleum storage facilities:
What has happened after Buncefield?
Marshall Mott-Smith, Mott-Smith Consulting Group LLC,
Tallahassee, FL, USA
11:20
End of first conference day
19:00
Evening Programme
Learning from accidents
Mark Hailwood, Karlsruhe, DE
10:30
Laser scanning as a complement to Magnetic Flux
Leakage inspections
Vincent Lesueur, SCOPEO, Le Havre, FRA
17:30
New VdTÜV-Merkblatt „Storage facilities with stationary tanks, filling and emptying facilities”
Legal framework, structure, potential for fire safety,
construction requirements for bunds and storage rooms
Dr. Hermann Dinkler, VdTÜV - Verband der TÜV e.V., Berlin,
DE
Protective strip, planning of zones, retention of water
for firefighting, flame arresters, active storage
Dr. Dirk-Hans Frobese, Physikalisch-Technische Bundesanstalt, Braunschweig, DE
Overview of standards and rules which have to be
respected for flat bottom storage tanks in Germany
Peter Ball, TÜV SÜD Industrie Service GmbH, Munich, DE
Agenda on Tuesday, November 6, 2012
9:30
9:45
Welcome
Winfried Schock, TÜV SÜD Industrie Service GmbH,
Munich, DE
10:45
14:00
Introduction
Peter Szalata, TÜV SÜD Industrie Service GmbH,
Munich, DE
Emission Reduction and Control – Standards, Activities
and Experience Reports
10:15
Agenda on Wednesday, November 7, 2012
The amendment of the 20th German Federal Emission
Protection Directive (BImschV), legal immission control
requirements for storage tanks with gasoline, blended
fuels and naphtha
Karen Pannier, Umweltbundesamt, Dessau, DE
Detection methods for product emissions and odorours
substances
Norbert Botz, BAYERNOIL Raffineriegesellschaft mbH,
Neustadt, DE
14:30
The United States Environmental Protection Agency's Oil
Spill Prevention Program and regulations for aboveground
storage tanks
Mark W. Howard, U.S. Environmental Protection Agency's
(USEPA), Wahington, DC, USA (inquired)
Overview of the legislation and standards in Slovenia
regarding flat bottom tanks planing and construction
Ales Povse, Petrol, Ljubljana, SLO
Coffee break
11:15
Coffee break
16:15
11:45
Alternative emission reduction methods at storage tanks
with volatile hydrocarbons
Thomas Schirmer, Ingenieurbüro Imhof GmbH,
Mühlheim am Main, DE
Inspection and maintenance according to EEMUA 159
guideline
Jan de Jong, D&C engineering, Alblasserdam, NL,
Chairman of EEMUA Storage Tank Committee
12:45
Lunch
9:00
9:30
15:00
15:30
Vapour reduction by the use of full contact and/or
pontoon type internal floating roofs and aluminium
domes – international experience
Mario Strache, Elsont Group, Storage Tank Equipment,
Buochs, CH
8:30
Federal standard ordinance on facilities for handling
substances hazardous to water – current state
Thomas Wagner, Bayerisches Landesamt für Umwelt,
Augsburg, DE
New Challanges
11:50
The latest revision of EN 14015
Jan de Jong, D&C engineering, Alblasserdam, NL
12:05
Seismic design: application of Eurocodes to storage
tanks for liquefied gases according to EN 14620
Richard Albert, Aachen, DE
12:30
Lunch
13:45
References to the seismic calculation and structural
design of cylindrical flat bottom tanks
Dr. Burkhard Hänelt, Ingenieurbüro Dr. Hänelt + Dr. Münzer,
Bad Bramstedt, DE
14:15
Performance-based seismic design of tanks with
Energy-Dissipating Anchors
Dr. Praveen K. Malhotra, P.E., StrongMotions Inc.,
Sharon, MA, USA
14:45
Lightning and static protection for above ground storage
tanks
Bruce Kaiser, Ligtning Master Corporation,
Clearwater, FL, USA
15:05
Faom agents for E10 fire fighting and for foam-systems
conform with EN 13 565-2
Martin Gorski, Fabrik chemischer Präparate von
Dr. Richard Sthamer GmbH & Co.KG, Hannover, DE
15:30
Outlook and farewell
Peter Szalata, TÜV SÜD Industrie Service GmbH,
Munich, DE
International Requirements for Construction and
Operation of Flat Bottom Storage Tanks
Influence of venting technology on emission reduction
Michael Davies, Braunschweiger Flammenfilter GmbH, DE
12:15
Tank Farm Design and Organisational Responsibilities
17:00
10:00
Coffee break
11:00
Fires and explosions at bulk petroleum storage facilities:
What has happened after Buncefield?
Marshall Mott-Smith, Mott-Smith Consulting Group LLC,
Tallahassee, FL, USA
11:20
End of first conference day
19:00
Evening Programme
Learning from accidents
Mark Hailwood, Karlsruhe, DE
10:30
Laser scanning as a complement to Magnetic Flux
Leakage inspections
Vincent Lesueur, SCOPEO, Le Havre, FRA
17:30
New VdTÜV-Merkblatt „Storage facilities with stationary tanks, filling and emptying facilities”
Legal framework, structure, potential for fire safety,
construction requirements for bunds and storage rooms
Dr. Hermann Dinkler, VdTÜV - Verband der TÜV e.V., Berlin,
DE
Protective strip, planning of zones, retention of water
for firefighting, flame arresters, active storage
Dr. Dirk-Hans Frobese, Physikalisch-Technische Bundesanstalt, Braunschweig, DE
Overview of standards and rules which have to be
respected for flat bottom storage tanks in Germany
Peter Ball, TÜV SÜD Industrie Service GmbH, Munich, DE
Registration by Fax +49 89 5791-2833 or E-mail: [email protected]
and on www.tuev-sued.de/academy/congress
The conference
8th International Conference on Flat Bottom Tanks
The aim of the 8th International Conference on Flat bottom Tanks
is to prepare for the implementation of new rules and regulations,
as from 2015 additional requirements concerning pollution control
need to be considered. Planners and operators are faced by the
abolition of the existing technical rules for storage plants with
burnable liquids by the end of 2012, the new regulations on water
act, which will be implemented in 2013, and the current introduction of European standards.
November 6 – 7, 2012, Munich, Germany
Name and Title (if applicable)
First Name
Company
www.tuev-sued.de/academy/congress
Presentations with practical relevance from German and international speakers respond to these topics.
Department
VAT No. (mandatory for EU member states excl. Germany). This number should be used
for all services purchased from TÜV SÜD Akademie GmbH.
Participation fee
€ 850,– plus current VAT (if applicable)
Street
The registration fee includes conference documentation,
lunch and drinks during breaks as well as the evening event.
Country / Zip Code / City
International Conferences
Conference venue
Phone
Alte Kongresshalle
Theresienhöhe 15 · 80339 Munich, Germany
Yes, I hereby agree to receive further information via E-mail
via Phone
Note: According to Art. 28 BSDG (German Data Protection Act) you may withdraw your consent to
the use of your personal data for advertising purposes by TÜV SÜD Akademie GmbH informally, at
any time and free of charge. TÜV SÜD Akademie GmbH, AC-TuK, Westendstr. 160, 80339 Munich
(Germany); E-mail: [email protected]; Fax: +49 89 5791-2833.
Invoice address (if different from above):
Name / Company
Address
Registration fee: € 850,– plus current VAT (if applicable)
Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge.
In case of cancellation beyond this deadline and up to the third working day prior the event, 50 %
of the invoice amount is due for payment. In case of cancellation beyond this deadline or failure to
participate in the event, the full amount of the invoice shall be due. I accept changes in the
programme and the general terms and conditions of participation of TÜV SÜD Akademie GmbH.
Date
Signature
8th International Conference on
Flat Bottom Tanks
You will receive travel and hotel information
with the confirmation of your registration
Registration and information
TÜV SÜD Akademie GmbH
International Conferences
Susanne Hummler
Westendstraße 160
80339 Munich, Germany
Phone + 49 89 5791-2846
Fax + 49 89 5791-2833
[email protected]
November 6 – 7, 2012, Munich, Germany
Conference Chairman
Peter Szalata, TÜV SÜD Industrie Service GmbH, Munich
Supported by:
å 08-2012
E-mail
The conference addresses to
Chemical and mineral oil industry as well as energy provider
companies
Constructors of plants with flat bottom tanks
Manufacturers of flat bottom tanks
Specialized companies and suppliers for flat bottom tanks
Government agencies and associations responsible for environmental protection, prevention of water pollution and building
legislation
Experts
Interested companies have the
TÜV SÜD Industrie Service GmbH
TÜV SÜD Akademie GmbH
opportunity to present their products
and services in the exhibition which
will be held parallel to the conference.
Registration by Fax +49 89 5791-2833 or E-mail: [email protected]
and on www.tuev-sued.de/academy/congress
The conference
8th International Conference on Flat Bottom Tanks
The aim of the 8th International Conference on Flat bottom Tanks
is to prepare for the implementation of new rules and regulations,
as from 2015 additional requirements concerning pollution control
need to be considered. Planners and operators are faced by the
abolition of the existing technical rules for storage plants with
burnable liquids by the end of 2012, the new regulations on water
act, which will be implemented in 2013, and the current introduction of European standards.
November 6 – 7, 2012, Munich, Germany
Name and Title (if applicable)
First Name
Company
www.tuev-sued.de/academy/congress
Presentations with practical relevance from German and international speakers respond to these topics.
Department
VAT No. (mandatory for EU member states excl. Germany). This number should be used
for all services purchased from TÜV SÜD Akademie GmbH.
Participation fee
€ 850,– plus current VAT (if applicable)
Street
The registration fee includes conference documentation,
lunch and drinks during breaks as well as the evening event.
Country / Zip Code / City
International Conferences
Conference venue
Phone
Alte Kongresshalle
Theresienhöhe 15 · 80339 Munich, Germany
Yes, I hereby agree to receive further information via E-mail
via Phone
Note: According to Art. 28 BSDG (German Data Protection Act) you may withdraw your consent to
the use of your personal data for advertising purposes by TÜV SÜD Akademie GmbH informally, at
any time and free of charge. TÜV SÜD Akademie GmbH, AC-TuK, Westendstr. 160, 80339 Munich
(Germany); E-mail: [email protected]; Fax: +49 89 5791-2833.
Invoice address (if different from above):
Name / Company
Address
Registration fee: € 850,– plus current VAT (if applicable)
Cancellation policy: Cancellation of registration up to 14 days prior to the event is free of charge.
In case of cancellation beyond this deadline and up to the third working day prior the event, 50 %
of the invoice amount is due for payment. In case of cancellation beyond this deadline or failure to
participate in the event, the full amount of the invoice shall be due. I accept changes in the
programme and the general terms and conditions of participation of TÜV SÜD Akademie GmbH.
Date
Signature
8th International Conference on
Flat Bottom Tanks
You will receive travel and hotel information
with the confirmation of your registration
Registration and information
TÜV SÜD Akademie GmbH
International Conferences
Susanne Hummler
Westendstraße 160
80339 Munich, Germany
Phone + 49 89 5791-2846
Fax + 49 89 5791-2833
[email protected]
November 6 – 7, 2012, Munich, Germany
Conference Chairman
Peter Szalata, TÜV SÜD Industrie Service GmbH, Munich
Supported by:
å 08-2012
E-mail
The conference addresses to
Chemical and mineral oil industry as well as energy provider
companies
Constructors of plants with flat bottom tanks
Manufacturers of flat bottom tanks
Specialized companies and suppliers for flat bottom tanks
Government agencies and associations responsible for environmental protection, prevention of water pollution and building
legislation
Experts
Interested companies have the
TÜV SÜD Industrie Service GmbH
TÜV SÜD Akademie GmbH
opportunity to present their products
and services in the exhibition which
will be held parallel to the conference.