AVOLA Revolving Cross Cut Saw GAMA 65 V

Transcription

AVOLA Revolving Cross Cut Saw GAMA 65 V
AVOLA
Revolving Cross Cut Saw GAMA 65 V
Revolving cross cut / rip cut saw
Technical Equipment
Motor rating 12 kW / 400 Vac-50 Hz star / delta start (P2 – S 6-40%)
Sawblade mounted direct on motor shaft
l Motor speed rpm 3.000 / sawblade speed rpm 3.000
l Cutting height 90°/245 mm – 45°/164 mm – 30°/113mm
l Electrical sawblade inclination 90 – 30° – digital readout
l Revolving table 0-270°
l Machine table with lateral movement 400 mm
l Automatic vertical pneumatic clamping cylinders right and left
lTwo-hand pneumatic cross cutting operation
lLaser light for cross cutting
l TCT-sawblade, 650 mm / Sawblade height adjustment
l Dust extraction spigots 160 / 125 mm
l Sawblade height adjustment 0-245 m
Options
l Infeed –
Outfeed devices
l
l
since 1836
CIRCULAR SAWS
GAMA 65 V short roller infeed / outfeed table / alu back fences (optional)
AVOLA MASCHINENFABRIK
A. Volkenborn GmbH & Co. KG
Revolving table / rip cutting
Revolving table / mitre cutting
Heiskampstraße 11
D-45527 Hattingen
Postfach 80 02 28
D-45502 Hattingen
Telefon+49 / 23 24 - 96 36-0
Telefax +49 / 23 24 - 96 36-50
E-mail [email protected]
www.avola.de
AVOLA Circular Saw Bench GAMA 65 K
Revolving cross cut saw
AVOLA Circular Saw Bench GAMA 80 V
Revolving cross cut / rip cut saw
Motor rating 10 kW/400 Vac-50 Hz, star / delta start
sawblade mounted direct on motor shaft
l Motor speed 3.000 rpm
l Sawblade height at 90° / 245 mm – 45° / 164 mm –
30° / 113 mm
l Electrical sawblade inclination 90 – 30° –
digital readout
l Revolving table 20° – 160°
l Automatic pneumatic clamping hood
l Two-hand pneumatic cross cutting operation
l Laser light for cross cutting position
l TCT-sawblade, dia. 650 x 30 mm x T 54
l Dust extraction spigot 125 / 80 mm
l
l
Options
l Additional clamping cylinders, horizontal, left-right
l Brush curtain for safety clamping hood
Motor rating 15 kW (P1) / 400 Vac-50 Hz star delta
start, gear drive
l Motor speed rpm 3.000 / sawblade speed
rpm 2.200
l Cutting height 90° / 310 mm – 45° / 217 mm –
30° / 149 mm
l Electrical sawblade inclination 90 – 30°
l Revolving table 0-270°
l Machine table with lateral movement 650 mm
l Automatic vertical pneumatic clamping cylinders
right / left
l Laser light for cross cutting
l TCT-sawblade, 800 x 30 x T90
l Dust extraction spigots 160 / 160 / 80 / 80 mm
l Sawblade height adjustment via mechanical stop
system, with measuring scale, easy to adjust
l DUO infeed / outfeed devices
l
since 1836
Foto: GAMA 65 K
Foto: GAMA 80 V
GAMA 65 K, GAMA 65 V, GAMA 80 V
Technical datas
Unit
GAMA 65 K
GAMA 65 V
GAMA 80 V
Motor output (S1)
kW
10
12
15
direkt
direkt
Getriebe
1/m
3000
3000
3000
Drive
Motor speed
Sawblade speed
1/m
3000
3000
2200
Peripheral speed of saw
m/s
102
102
90
TCT – sawblade
mm
650
650
800
Cutting height 90/45/30° ca.
mm
245/164/113
245/164/113
310/217/149
Table dimensions
m
1,5 x 1,5 x 0,9
1,5 x 1,5 x 0,9
1,5 x 1,5 x 0,9
Sawblade inclination
°
90-30
90-30
90-30
Revolving table, angle
°
20-160
0-270
0-270
Ø Dia. Dust extraction spigots
mm
125/80
160/125
160/160/80/80
Vacuum at dust extraction spigots
pa
1750
1750
1750
Sound power level against DIN EN ISO 3746
run at no load – run at load
dB (A)
107,5/109,1
107,5/109,1
102,0/106,0
Emission sound pressure against
prEN ISO 11202 in connection with CEN TC 142
run at no load – run at load
dB (A)
92,2/95,6
92,2/95,6
87,0/91,0
The complete range of AVOLA machines:
AVOLA building site saws, special machines and corresponding filter units
AVOLA circular saw bench machines
AVOLA circular sawblades
AVOLA brick and stone cutting machines for the refractory industries
AVOLASTIC-SIC-cutting discs
AVOLA corresponding filter units for brick and stone cutting machines
Please ask for special information!