Avery Vinyl

Transcription

Avery Vinyl

56
SIGN VINYL & ACCESSORIES
Avery Vinyl
Durability: 4 to 5 years
Conformability: Flat
Printability: CAS, thermal transfer
Adhesive: Permanent solvent
Gloss: 90
Type: Calendered vinyl
A4 Opaque
Cost-effective intermediate high-gloss film
for short or long term signage. Available
with vinyl to the edge in 49 colors.
Guide to symbols found
throughout Avery vinyl color
charts on the next few pages
◗
2-year durability
▲
3-year durability
●
4-year durability
❖
5-year durability
Clear
A4003-O
✦
Apricot
A4155-O
Azure Blue
A4562-O
White
A4001-O
✦❖ BL
Pizzazz Orange
A4159-O
Brilliant Blue
A4566-O
True White
A4005-O
Autumn Orange
A4179-O
Medium Blue
A4555-O
Mist Gray
A4038-O
Medium Red
A4317-O
Gentian Blue
A4536-O
Silver Gray
A4042-O
Cherry Red
A4320-O
Sky Blue
A4543-O
Geranium Red
A4335-O
Teal
A4620-O
❖
❖
❖
✖
6-year durability
★
7-year durability
✚
8-year durability
Silver
A4077-O
◗
Also available with
Easy Apply™ technology
Pewter
A4050-O
Cardinal Red
A4330-O
Lime
A4659-O
Med. Marine Gray
A4060-O
Brick Red
A4351-O
Light Green
A4661-O
Black
A4090-O
Merlot
A4375-O
Olive Green
A4665-O
Deep Brown
A4285-O
Soft Pink
A4408-O
Grass Green
A4668-O
Gold
A4247-O
◗
Tropical Pink
A4412-O
Cactus Green
A4673-O
Copper
A4289-O
◗
Violet
A4455-O
Mountain Green
A4674-O
Beige Tholonet
A4232-O
Dark Navy Blue
A4597-O
Forest Green
A4685-O
Ivory
A4233-O
Mariner Blue
A4589-O
Stone Yellow
A4109-O
Royal Blue
A4583-O
Bright Yellow
A4108-O
Ultramarine Blue
A4574-O
Promise Yellow
A4110-O
Interstate Blue
A4575-O
Canary Yellow
A4120-O
Flex Blue
A4564-O
EZ
BL
Blue Liner
HT
Also available with HiTack
adhesive (specifically used
on gel-coated fiberglass,
painted aluminum, powdercoated paint, and other
hard to adhere surfaces)
■
✿
▼
Pigmented adhesive - not
reversible
Not warranted for use in
direct sunlight
Can withstand heat up to
200ºF
✸
Non-adhesive material
✦
Also available in THM
(non-striped) format
✪
Not an approved Pantone®
Color
✤
This is not a color used by
government institutions and
therefore does not have a
corresponding ASTM or
LS300 reflectivity value
❖
❖
❖
❖
❖
❖
❖
Colors shown are ink reproductions and may vary from actual vinyl color. Please refer to Avery’s color chart for accurate colors.
Farmingdale Branch 631.420.4400
Long Island Toll Free 1.888.399.1113
Avery Vinyl
Durability: 6 years
Conformability: Flat, simple curves
Gloss: 70
Type: Calendered vinyl
A6 Opaque
The industry benchmark in intermediate
signage, with unparalled cutting and
weeding. Now available in 72 colors.
Clear
A6003-O
✦●
Salmon
A6406-O
Deep Pink
A6412-O
Cascade Blue
A6542-O
Matte White
A6002-O
Primrose Yellow
A6110-O
Blossom
A6415-O
Light Blue
A6540-O
White
A6001-O
Rubber Duckie
A6125-O
Blush
A6419-O
Real Teal
A6615-O
True White
A6005-O
Yellow
A6135-O
Raspberry
A6435-O
Teal
A6620-O
Slate Gray
A6030-O
Mustard
A6152-O
Berry
A6470-O
Turquoise
A6625-O
Medium Gray
A6035-O
Dark Yellow
A6150-O
Lavender
A6475-O
Seafoam Green
A6603-O
Silver
A6077-O
▲
Bright Orange
A6180O
❖
Purple
A6465-O
Iguana Green
A6658-O
Dark Gray
A6055-O
Tangerine
A6315-O
❖
Dark Navy Blue
A6597-O
Yellow Green
A6680-O
Battleship Gray
A6070-O
True Red
A6332-O
Dark Blue
A6595-O
Olive Green
A6665-O
Matte Black
A6080-O
Tomato Red
A6325-O
❖
Majestic Blue
A6525-O
Kelly Green
A6670-O
Black
A6090-O
Red
A6340-O
Impulse Blue
A6587-O
Green
A6678-O
Terra Cotta
A6260-O
Fire Red
A6345-O
Royal Blue
A6583-O
Forest Green
A6685-O
Chocolate Brown
A6290-O
Cardinal Red
A6330-O
Vibrant Blue
A6508-O
●
Sherwood Green
A6666-O
Dark Brown
A6283-O
Dark Red
A6350-O
Vivid Blue
A6570-O
Dark Green
A6693-O
Imitation Gold
A6250-O
Spectra Red
A6360-O
Medium Blue
A6573-O
Gold
A6247-O
▲
Wine Berry
A6367-O
Wedgwood Blue
A6532-O
Carmel
A6273-O
Burgundy
A6370-O
Olympic Blue
A6530-O
Beige
A6220-O
Soft Pink
A6408-O
Cool Blue
A6533-O
BL
✦
HT EZ BL
BL
HT EZ
EZ
EZ
EZ
EZ
EZ
EZ
EZ
EZ
Brooklyn Branch 718.399.3333
Upstate NY & NJ Toll Free 1.800.246.8233
57
58
Avery Vinyl
A7 Opaque
A9 Opaque
A high gloss film, great
for vehicle graphics and
long-term signage solutions.
Choose from 120 high
performance industry
standard colors including
24 matched to Pantone’s
most specified colors.
Durability: 7-year
Conformability: Simple curves, compound curves
Gloss: 90
Type: Cast vinyl
Clear
A7003-O
White
A7001-O
BL
Black
A7090-O
Chocolate Mousse
A7289-O
Dark Yellow
A7150-O
Light Orange
A7289-O
Romantic Red
A7323-O
Apple Red
A7329-O
Burgundy Red
A7372-O
Cosmos Blue
A7571-O
Sea Blue
A7581-O
Evergreen
A7686-O
Durability: Up to 9 year
Conformability: Rivets/corrugations,
compound curves
Gloss: 90
Type: Cast vinyl
Sunshine Yellow
Pantone 116 C
A9114-O
■✖
Medium Yellow
A9130-O
■
White
A9001-O
Cocoa
A9278-O
True White
A9005-O
Terra Cotta
A9260-O
Matte White
A9002-O
Imitation Gold
A9250-O
Sunflower
A9140-O
Clear
A9003-O
Parchment
A9205-O
Dark Yellow
A9150-O
Matte Clear
A9004-O
Almond
A9210-O
Apricot
A9155-O
Pantone
Warm Gray 2 C
A9022-O
■
Light Gray
A9010-O
Navajo Beige
Pantone 468 c
A9255-O
■✚
Beige
A9220-O
Palm Oyster
A9020-O
Dark Beige
A9230-O
Light Ash Gray
A9025-O
Slate Gray
A9030-O
Dark Taupe
Pantone 466 C
A9252-O
■✚
Sandstone
A9265-O
Medium Gray
A9035-O
Buckskin
A9270-O
Pewter
A9050-O
Camel
A9240-O
✦ HT
EZ BL
EZ
Silver Shimmer
Pantone 877 C
A9069-O
■✖
Dark Gray
A9055-O
Med. Marine Gray
A9060-O
Matte Black
A9080-O
Black
A9090-O
HT EZ
Brown
A9295-O
Putty
A9235-O
Pantone
Process Yellow C
A9106-O
■✖
Luminous Yellow
A9102-O
■
Butter
A9105-O
■
Lemon Zest
Pantone 109 C
A9113-O
■✖
Canary Yellow
A9120-O
EZ
EZ
EZ
Orange
A9160-O
EZ
Pantone
Orange 021 C
A9169-O
■✖
Bright Orange
A9180-O
Tangerine
A9315-O
Warm Red
A9305-O
■
Luminous Red
A9318-O
■
Pantone
Red 032 C
A9306-O
■✖
Real Red
A9317-O
Firecracker
Pantone 485 C
A9321-O
■✖
Holiday Red
Pantone 1797 C
A9305-O
■✚
Tomato Red
A9325-O
EZ
Fire Red
A9345-O
■
Cardinal Red
A9330-O
EZ
Colors shown are ink reproductions and may vary from actual vinyl color.
Please refer to Avery’s color chart for accurate colors.
Master Distributors of SIGN and AWNING Materials & Equipment
Avery Vinyl
A9 Opaque
Choose from 120 high performance
industry standard colors including
24 matched to Pantone’s most
specified colors.
Jungle Green
Pantone 375 C
A9634-O
■✚
Interstate Blue
A9575-O
Sapphire Blue
A9580-O
Powder Blue
A9550-O
Butterfly Blue
A9552-O
Clover Green
Pantone 354 C
A9626-O
■✚
Kelly Green
A9670-O
Cadet Blue
A9515-O
Spectra Everglade
A9610-O
Aquamarine
A9633-O
Bright Green
A9675-O
Real Teal
A9615-O
Forest Green
A9685-O
Dark Aqua
A9605-O
Spruce Green
A9640-O
Seafoam Green
A9603-O
Deep Green
A9690-O
Peacock
Pantone 300 C
A9578-O
■✚
Pantone
Process Blue C
A9582-O
■✚
Medium Blue
A9555-O
Light Sage
A9609-O
Dark Green
A9693-O
Teal
A9620-O
Polo Green
A9695-O
Copenhagen
A9505-O
Nautical Blue
A9635-O
Shadow Blue
A9520-O
Apple Red
A9365-O
■
Majestic Blue
A9525-O
Spectra Red
A9360-O
■
Burgundy
A9370-O
EZ
Burgundy Maroon
A9380-O
Blossom
A9415-O
Pantone Process
Magenta C
A9411-O
■✖
Magenta
A9430-O
EZ
Raspberry
A9435-O
Lavender
A9475-O
Durability: Up to 9 year
Conformability: Rivets/corrugations, compound curves
Gloss: 90
Type: Cast vinyl
Bayshore
Pantone 292 C
A9557-O
■✚
Baby Blue
Pantone 277 C
A9502-O
■✚
Peacock Blue
A9545-O
Dark Red
A9350-O
EZ
Pantone
Reflex Blue C
A9579-O
■✚
Pantone
Blue 072 C
A9501-O
■✚
Midnight Blue
Pantone 286 C
A9528-O
■✚
Vivid Blue
A9570-O
Deep Purple
A9450-O
Purple
A9465-O
Pantone
Violet C
A9413-O
■✖
Periwinkle
A9510-O
Dark Navy Blue
A9597-O
Wave Blue
Pantone 285 C
A9526-O
■✚
Olympic Blue
A9530-O
Grow Green
A9672-O
EZ
EZ
EZ
Plum
A9440-O
Apple Green
A9660-O
EZ
EZ
Slate Blue
Pantone 293 C
A9559-O
■✚
Intense Blue
A9565-O
59
Dark Teal
A9630-O
Dark Ivy
A9650-O
Olive Green
A9665-O
EZ
Dark Blue
A9595-O
EZ
Light Navy
A9590-O
EZ
Tropical Blue
Pantone 279 C
A9503-O
■✚
Light Blue
A9540-O
Vibrant Green
A9655-O
■
Lime Aid
A9632-O
Website www.sfsupplies.com Email [email protected] Toll Free Fax 888.399.3375
60
Avery Vinyl
A3 Reflective
A7 Reflective
Cost-effective intermediate reflective
film in 7 colors for short-term signage.
The industry’s most comprehensive line
of high-performance reflective vinyl
films in 17 colors.
Durability: 3 years
Printability: CAS
Reflectivity: Commercial grade
Liner: 90 lb. Sta-Flat™ liner
Type: Retroreflective urethane
(ASTM 4956-99)
White
Reflective
A3801-R
Dark Red
Reflective
A3818-R
Yellow
Reflective
A3812-R
Blue
Reflective
A3822-R
Orange
Reflective
A3815-R
Green
Reflective
A3824-R
Red
Reflective
A3816-R
Colors shown are ink reproductions and may vary from actual
vinyl color. Please refer to Avery’s color chart for accurate colors.
A3 Reflective 911
High-intensity reflective film, designed
especially for emergency vehicles.
Durability: 3 years
Printability: CAS, thermal, screen
Adhesive: 3-year removable
Reflectivity: prismatic
White
A3911-R
Red
A3913-R
White Reflective
A7801-R
Dark Red Reflective
A7818-R
Black Reflective
A7805-R
Burgundy Reflective
A7819-R
✤
Brown Reflective
A7806-R
✤
Olympic Blue Reflective
A7821-R
✤
Gold Reflective
A7807-R
Light Blue Reflective
A7820-R
New Gold Reflective
A7810-R
Blue Reflective
A7822-R
Yellow Reflective
A7812-R
Purple Reflective
A7823-R
✤
Orange Reflective
A7815-R
Kelly Green Reflective
A7825-R
✤
Tomato Red Reflective
A7817-R
✤
Green Reflective
A7824-R
Red Reflective
A7816-R
(up to 400 candelas)
Liner: Friction-coated polyester
Type: Metallized prismatic
Durability: 7 years
Conformability: Rivets/corrugations, compound curves
Printability: Thermal transfer, CAS, screen
Reflectivity: Commercial grade (ASTM 4956-99)
Liner: 90 lb. Sta-Flat™
Type: Retro-reflective vinyl
Blue
A3914-R
Conspicuity Tape Highly visible safety marking.
11" Red/7" White (2" x 150') A7841-S
6" Red/6" White (2" x 150') A7843-S
Durability: 7 years
Liner: 1.5 mil polyethylene
Compliance: Meets or exceeds
NHTSA (49CR571) DOT-2.
Yellow (2" x 150') A7844-S
Avery Vinyl
A9 Translucent
A6 Translucent
Pantone Colors
This intermediate translucent film is available
in 18 colors for bright backlit signage.
Durability: 6 years
Printability: CAS, Thermal transfer
Gloss: 30
Type: Cast vinyl
White
A6001-T
Black
A6090-T
Rust Brown
A6280-T
Primrose Yellow
A6110-T
Sunflower Yellow
A6140-T
Pumpkin Orange
A6163-T
Wine Red
A6371-T
Cardinal Red
A6330-T
Red
A6340-T
Bright Blue
A6567-T
Sultan Blue
A6572-T
Royal Blue
A6583-T
Ultra Marine Blue
A6574-T
Twilight Blue
A6591-T
Tidewater
A6607-T
Green Yellow
A6662-T
Medium Green
A6681-T
Bottle Green
A6682-T
Simulations of Pantone’s mostspecified translucent colors for
backlit signage. Available
splice-free in 10- and 50-yard rolls.
White
A9001-T
✪
Winter Sky
Pantone 427 C
A9011-T
Silver Shimmer
Pantone 877 C
A9069-T
▲
Charcoal
Pantone 430 C
A9047-T
Pantone
Red 032 C
A9306-T
★
Strawberry
Pantone 186 C
A9308-T
★
Light
Tomato Red
A9324-T
Scarlet Red
Pantone 200 C
A9327-T
★
Pantone
Process Black C
A9081-T
Red
A9340-T
★✪
Duranodic
Pantone 412 C
A9298-T
Poinsettia
A9343-T
★✪
Golden Nugget
Pantone 4495 C
A9275-T
★
Gold Shimmer
Pantone 872 C
A9249-T
▲
Khaki
Pantone 466 C
A9252-T
★
Vanilla
Pantone 155 C
A9251-T
★
Sand Dune
Pantone 7500 C
A9217-T
★
Lemon Zest
Pantone 109 C
A9113-T
★
Pantone
Yellow 012 C
A9111-T
★
Sunshine
Pantone 116 C
A9114-T
★
Golden Yellow
Pantone 1235 C
A9143-T
★
Orange
A9180-T
Halloween Orange
Pantone 1655 C
A9161-T
★
Flame
Pantone 485 C
A9316-T
★
Cardinal Red
A9330-T
Blush Red
Pantone 188 C
A9368-T
★
Burgundy
A9370-T
★✪
Fuchsia
Pantone 214 C
A9416- T
✖
Durability: Up to 9 years
Conformability: Flat,
simple curves, thermo forming
Printability: CAS, Thermal transfer
Gloss: 30
Type: Cast vinyl
Real Blue
A9592-T
Twilight Blue
A9591-T
★✪
Pacific Blue
Pantone 2945 C
A9566-T
★
Process Blue
Pantone 3005 C
A9561-T
★
Wave Blue
Pantone 285 C
A9526-T
★
Tropical Blue
Pantone 279 C
A9503-T
★
Pale Blue
Pantone 290 C
A9556-T
★
Baby Blue
Pantone 277 c
A9502-T
★
Night Tide
Pantone 321 C
A9619 -T
★
Medium Teal
Pantone 322 C
A9622-T
★
Light Raspberry
A9434-T
Bright
Jade Green
A9679-T
Plum
Pantone 2622 C
A9446-T
★
Bright Purple
Pantone 266 C
A9460-T
✖
Patriot Blue
Pantone 274 C
A9467-T
★
Mediterranean Blue
Pantone 281 C
A9588-T
★
Blueberry
Pantone 2747 C
A9593-T
★
Night Sky Blue
Pantone 288 C
A9584-T
★
Jungle Green
Pantone 375 C
A9634-T
★
Clover Green
Pantone 354 C
A9626-T
★
Vivid Green
Pantone 355 C
A9662-T
★
Rainforest Green
Pantone 349 C
A9683-T
★
Army Green
Pantone 7483
A9676-T
★
Cobalt Blue
A9586-T
★✪
Real Green
A9641-T
Holly Green
A9692-T
★✪
Colors shown are ink reproductions and may vary from actual vinyl color.
Please refer to Avery’s color chart for accurate colors.
61
62
Avery Vinyl
Metallic
High-gloss, Premium quality metallic cast film, now available in
36 colors with vinyl to the edge.
Durability: 5-7 years
Conformability: Rivets/corrugations,
compound curves
Gloss: 90
Type: Cast vinyl
Silver
A5701-M
Purple
A7760-M
Pewter
A7704-M
Amethyst (Luster)
A5795-M
■
Charcoal
A7705-M
Dark Royal Blue
A7753-M
Gunmetal
A7706-M
Grand Blue
A7751-M
Medium Charcoal
A7708-M
Royal Blue
A7749-M
Dark Charcoal
A7709-M
Sea Blue
A7744-M
Black
A7711-M
Sorcery
A7741-M
Bronze
A3730-M
▲ EZ
Mist Blue
A7742-M
Copper
A5732-M
Electric Blue
A7747-M
Antique Bronze
A5728-M
Bright Blue
A7746-M
Light Gold
A3717-M
▲ EZ
Down to Earth
A5929-M
Light Briar Brown
A7723-M
Sapphire (Luster)
A5797-M
■
Champagne Mist
A5720-M
Blue Lagoon
A7765-M
Gold
A3715-M
▲
Dark Teal
A7767-M
Bright Gold
A3713-M
▲ EZ
Leaf
A7768-M
Garnet Luster
A5733-M
Hunter Green
A7770-M
Red
A7738-M
Pine Green
A7772-M
Autumn Maple
A7740-M
Dark Olive Green
A7772-M
EZ
EZ
Ultra Metallic
Brilliant metallic cast vinyl film in 9
colors, now with vinyl to the edge.
Durability: 5 years
Adhesive: Permanent pigmented
Gloss: 90
Type: Cast vinyl
Silver
A5777-M
■
Rosa Quartz
A5785-M
■
Black
A5778-M
■
Amethyst
A5786-M
■
Gold
A5779-M
■
Cobalt
A5790-M
■
Red
A5781-M
■
Blue
A5788-M
■
Beryl
A5791-M
■
Shade-Shifter™
Premium quality, iridescent, 5-year
durable cast film in 6 color
combinations that change color as
viewing angle shifts.
Durability: 5 years
Conformability: Flat, compound curves
Adhesive: Permanent pigmented
Gloss: 90
Type: Cast vinyl
Cyan/Purple
A5745-M
■
Silver/Green
A5771-M
■
Magenta/Gold
A5759-M
■
Gold/Silver
A5714-M
■
Green/Purple
A5769-M
■
Blue/Red
A5757-M
■
Avery Vinyl
Metallized
Vinyl
Leaf
Fluorescent
Pearlescent
Gold Leaf
A5864-S
Black
Carbon Weave
A3874-S
Yellow Fluorescent
A0829-S
✿■
Clear Pearlescent
A5826-S
■
Florentine
Gold Leaf
A2864-S
Diamond Plate
A2891-S
Orange Fluorescent
A0830-S
✿■
Silver Leaf
A5863-S
Engine Turn Gold
A2859-S
Red Fluorescent
A0831-S
✿■
White Pearlescent
A5827-S
■
Marine Blue
Pearlescent
A5831-S
Florentine
Silver Leaf
A2863-S
Small Engine Turn
A2858-S
Pink Fluorescent
A0832-S
✿■
Hammered
Silver Leaf
A2870-S
Shimmer
A2872-S
Hammered
Gold Leaf
A2871-S
Silver Illusion
A2874-S
Holographic
Silver
Carbon Weave
A3875-S
Frosted
Films
Confetti
A0840-S
Etchmark™
A5861-S
Kaleidoscope
A0846-S
Metallized
Polyester
Frosted Sparkle
A5862-S
White Sparkle
A3860-S
Brushed Chrome
A1840-S
Perforated
Window Film
Brushed Gold
A1842-S
Chrome Mirror
A1846-S
Green Fluorescent
A0834-S
✿■
Magenta Fluorescent
A0835-S
✿■
Printed Film
Clear Carbon Farber
A3832-S
White Carbon Farber
A3830-S
Black Carbon Farber
A3834-S
Bravo Burl
A2845-S
Cheyenne Teak
A2846-S
Dry Erase EZ
Static
Cling
Double Gold
A1850-S
Paint Mask
Static Cling White Sample Provided
Upon Request
A0855-S
Static Cling Clear Sample Provided
A0858-S
Upon Request
White Paint Mask
A1828-S
Yellow Paint Mask
A1830-S
▼
Graphic Arts
Protection Film
Ruby Sample Provided
A0862-S
Upon Request
Timberline
Pearlescent
A5830-S
■
Teal Pearlescent
A5829-S
■
Camouflage
Mossy Oak
Break-Up
A5897-S
EZ
Advantage
Hardwoods
A5896-S
EZ
Perforated
Window Film
A1835-S
Gold Mirror
A1848-S
SPF 1000
A5868-S
Blue Fluorescent
A0833-S
✿■
63
Marks-A-Lot®
Whiteboard
A0851-S EZ
Dry Erase
Dry Erase Vinyl
A0850-S
True
Shadow™
True Shadow
A7840-S
Army
Woodlands
A5898-S
EZ
Light Control
Designed to use with
Translucent Series films in
backlit signage applications.
White 30% Diffuser
A5847-S
White 60% Diffuser
A5848-S
White Blockout
A5851-S
Black Blockout
A5852-S
Easy
Removable
White Removable
A2850-S
Black Removable
A2851-S
64
SignGold Vinyl
22K Gold
No other sign making material adds value to signage like gold!
Satin Surface
ITEM NO.
SignGold is used around the world to create beautiful graphics, signage and vehicle lettering, and has given thousands of sign professionals, just like you, the ability to offer “gold leaf” services, without
the time and cost of traditional gilding.
SIZE
Satin Surface 15”
SG1-SS-02
SG1-SS-05
SG1-SS-10
SignGold cuts, weeds and applies much like any other high performance vinyl. At only 1 mil thick it not only requires no extra blade
pressure when cutting, but will actually conform to rivets and other
surface irregularities better than most premium vinyls…and 22 karat
gold will not fade!
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
Satin Surface 24”
Fully compatible with other high performance vinyls, your projects become designed of lasting beauty, with SignGold’s 10-14 year outdoor life, graffiti, stain and salt water resistance
and UV protection.
Also available SOLGold inkjet printable fo 22K gold vinyl
SG1-SS-42
SG1-SS-45
SG1-SS-50
24” x 2 yds.
24” x 5 yds.
24” x 10 yds.
Satin Surface 15”
Thermal Printable for Gerber Edge
SG1-SSP02
SG1-SSP05
SG1-SSP10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
*Silver Satin Surface 15”
22K Gold Striping
ITEM NO.
SIZE
Florentine Swirl Striping 50’ Rolls
SG1025XFS
SG1050XFS
SG1100XFS
1/4” x 50’
1/2” x 50’
1” x 50’
Florentine Striping With Black Border
SG-FS5BB
1/2” x 50’
22K Gold Satin Surface Striping 50’ Rolls
SG1025XSS
SG1050XSS
SG1100XSS
1/4” x 50’
1/2” x 50
1” x 50’
Satin Surface Double Striping 150’ Roll
SG1316YSS
SG1516YSS
1/16” 150’
1/8” 150’
Small Engine Turn Striping 50’ Rolls
SG1SET050
SG1SET100
1/2” x 50’
1” x 50’
Large Engine Turn Striping 50’ Rolls
SG1LET050
SG1LET100
1/2” x 50’
1” x 50’
Large Engine Turn Striping with Black
Border
SG1LET5BB
1/2” x 50’
SG1SSS-02
SG1SSS-05
SG1SSS-10
22K Gold
Florentine Swirl
ITEM NO.
22K Gold
SIZE
Surface Matt 15”
Florentine Swirl 15"
SG1-FS-02
SG1-FS-05
SG1-FS-10
15" x 2 yds.
15" x 5 yds.
15" x 10 yds.
ITEM NO.
Reverse Cut Application
SURFCE-22
SURFCE-25
SURFCE-30
24" x 2 yds.
24" x 5 yds.
24" x 10 yds.
Thermal Printable for Roland PC12 & PC600
12” x 2 yds.
12” x 5 yds.
12” x 10 yds.
Florentine Swirl 15”
SG1-FSP02
SG1-FSP05
SG1-FSP10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
*Silver Florentine 15”
SG1SFL-02
SG1FSL-05
SG1FSL-10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
*Please note that all genuine silver films must be applied dry and edge sealed.
Signgold's Silver Leaf products are not recommended for outdoor use.
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
22K Gold
Florentine Swirl 12”
SGFSP1202
SGFSP1205
SGFSP1210
SIZE
Surface Matt 15”
Florentine Swirl 24"
SG1-FS-42
SG1-FS-45
SG1-FS-50
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
Miragold
ITEM NO.
SIZE
Miragold 15”
SG-MGP-02
SG-MGP-05
SG-MGP-10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
22K Gold
Burnished Glass
ITEM NO.
SIZE
Burnish Glass Gild 15”
Reverse Cut Application
BRNISH-22
BRNISH-25
BRNISH-30
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
SignGold Vinyl
Starter Kits
Includes:
22K Gold
22K Gold
Small Engine Turned
XLarge Engine Turned
ITEM NO.
SIZE
Small Engine Turn 15”
SG1SET-02
SG1SET-05
SG1SET-10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
Small Engine Turn 15”
SG1SETP02
SG1SETP05
SG1SETP10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
*Silver Small Engine Turn 15”
SG1SSET02
SG1SSET05
SG1SSET10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
ITEM NO.
SIZE
Extra Large Engine Turn 15”
SG1XLET02
SG1XLET05
SG1XLET10
24” x 2 yds.
24” x 5 yds.
24” x 10 yds.
SGXLETP02
SGXLETP05
SGXLETP10
$
9999
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
SG1XLET42
SG1XLET45
SG1XLET50
• 2 yards of genuine 22 karat gold vinyl
• “Working With Signgold” instructional CD
• Pricing & Profit guide
• POP retail counter display
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
Vehicle Graphic Starter Kit
Art schilling's
“Vehicle Graphic” CD-ROME
ITEM NO. SG99VGSP1
For Thermal Printing
ITEM NO. SG19VGTP1
Featuring 200 original truck door layouts for
nearly 70 common businesses
*Silver X Large Engine Turn 15”
SG1SXLT02
SG1SXLT05
SG1SXLT10
22K Gold
Large Engine Turned
ITEM NO.
SIZE
Large Engine Turn 15”
SG1LET-02
SG1LET-05
SG1LET-10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds
SG1LET-42
SG1LET-45
SG1LET-50
24” x 2 yds.
24” x 5 yds.
24” x 10 yds.
Thermal Printable for Roland PC12 & PC600
SGLTP1202
SGLTP1205
SGLTP1210
12” x 2 yds.
12” x 5 yds.
12” x 10 yds.
SG1LETP02
SG1LETP05
SG1LETP10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
*Silver Large Engine Turn 15”
SG1SLET02
SG1SLET05
SG1SLET10
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
15” x 2 yds.
15” x 5 yds.
15” x 10 yds.
Sign Design Starter Kit
Brian Briskie's
CD-ROME
ITEM NO. SG99SDSK2
ITEM NO. SG19SDTP2
Featuring instant layouts letting you combine
over 200 elements to create over 6,500 designs
“Best Of UK” Starter Kit
Nigel Eyden's
“Best of UK Signwriters” CD-ROME
ITEM NO. SG99UKSK3
ITEM NO. SG19UKTP3
100 designs by one of England's premier
sign makers
“Fire Truck” Starter Kit
Art schilling's
“So You Want To Letter
A Fire Truck” CD-ROME
ITEM NO. SG99FKK4
ITEM NO. SG19FTTP4
Ready to print and cut fire truck & emergency vehicles graphics
65
66
Decorative Vinyl
Decorative Series Vinyl
All decorative series vinyl are printable with thermal transfer, solvent, eco-solvent, UV screen and digital printers.
Decorative Series Vinylefx offer indefinite indoor life with proper care and handling. The exterior life is 6 to 12 months. The use of a UV protective clear coat
of PSA overlaminating film typically extends outdoor durability. Decorative
Series is not warranted for exterior applications. Film thickness is 2.8 mil.
Multi-Lens® Films
1-3/8" Lens Stock Colors:
1/4" Mosaic
AVAILABLE SIZES:
15" x 10 yds. (punched),
15" x 50 yds. (punched),
24" x 10 yds.,
24" x 50 yds.
Chrome Colors
* 0201 Silver
0204 Royal Blue
0202 Gold
0205 Sky Blue
0203 Cherry Red
0211 Orange
3101 Silver
3111 Orange
3102 Gold
0212 Raspberry
3103 Cherry Red
0214 Galaxy
7301
Silver
7302
Gold
7303
Cherry Red
3104 Royal Blue
7309
Yellow
0212 Raspberry (Purple)
7307
Emerald Green
0217 Fluorescent Green
Carbon Fibre
Metal Flake
7304
Royal Blue
7313
Plum (Violet)
C212 Raspberry (Purple)
C201 Silver
7314
Black (Galaxy)
C202 Gold
C2004 Royal Blue
C203 Cherry Red
C214 Black (Galaxy)
7317
Fluorescent Green
4202 Gold
7305
Sky Blue
7312
Raspberry
2-1/4" Lens Stock Colors:
Available Colors:
4402 Gold
9501
Silver
9509
Yellow
9512
Raspberry
4401 Silver
Fine Brush
K301 Silver
K303 Cherry Red
K304 Royal Blue
Brite Overall
9507
Emerald Green
9504
Royal Blue
4201 Silver
Florentine Leaf
Diamond
Plate
7311
Orange
9503
Cherry Red
WF14 Galaxy
Galvanized
7315
Fluorescent Yellow
9502
Gold
WF01 Silver
6502 Brush Gold
7901 Silver
6501 Brush Silver
Small Engine Turn
Glow-in-TheDark Film
0036 Safe-Glo®
4167 Gold
4101 Silver
Decorative Vinyl
67
Outdoor Durable Series Vinyl
All decorative series vinyl are printable with thermal transfer, solvent, eco-solvent, UV screen and digital printers.
Outdoor Durable Vinylefx offer up to 5
years exterior life depending on environmental conditions, installation procedures
and product suitability to the intended
application. Durability may vary. Edge sealing is necessary for applications subject to
demanding conditions, such as exposure to
drastic weather or climate, marine or winter craft installations, etc. Edge sealing
and applying a UV clear coat, or using a
PSA UV overlaminating film provides
added protection and enhances durability.
AVAILABLE SIZES:
15" x 10 yds. (punched), 15" x 50 yds. (punched), 24" x 10 yds., 24" x 50 yds.
7901 Bright Overall Silver
WF01 Carbon Fibre Silver
6501 Fine Brush Silver
J201 Hammered Leaf Silver
7301 13⁄8” Multi-Lens Silver
1901 Lg. Engine Turn Silver
K301 Diamond Plate Silver
WF37 Carbon Fibre Black
6502 Fine Brush Gold
J264 Hammered Leaf Gold
7302 13⁄8” Multi-Lens Gold
1967 Lg. Engine Turn Gold
0201 1/4” Mosaic Silver
3101 Smooth Silver
3701 Coarse Brush Silver
4401 Florentine Leaf Silver
4201 Galvanized Silver
4101 Sm. Engine Turn Silver
C201 Metal Flake Silver
3102 Smooth Gold
3702 Coarse Brush Gold
4402 Florentine Leaf Gold
4202 Galvanized Gold
4167 Sm. Engine Turn Gold
68
Application Tape
High Grade
High Tack
Standard Application Tape
General Purpose
High Tack
All Purpose
High Tack
Clean-tearing tapes with transfer power is
yours, so say goodbye to annoying stringy,
legging adhesive as well as adhesive transfer
to vinyl! If the adhesive side accidentally
folds onto itself, the tapes pull apart easily
with no delamination. Improved wet
method performance holds up longer.
Spectrum paper application tape takes the
hassle and mess out of using transfer tapes.
Tears cleanly with no stringy legging adhesive. If adhesive touches adhesive, Spectrum
pulls apart easily, with no adhesive transfer.
Spectrum also offers superior performance in
wet applications, with no gluey mess and no
time-consuming clean up.
•
•
•
•
•
Easy to handle
Forgiving when applying graphics
Smooth release
Tears easily with no legging
No adhesive residue
ITEM NO.
SIZE
VATSP1
VATSP2
VATSP3
VATSP4
VATSP5
VATSP6
VATSP7
VATSP8
VATSP9
VATSP10
VATSP11
VATSP12
VATSP14
VATSP15
VATSP16
VATSP18
VATSP20
VATSP24
VATSP30
VATSP36
VATSP48
VATSP60
1.25" x 300'
2" x 300'
3" x 300'
4" x 300'
5" x 300'
6" x 300'
7" x 300'
8" x 300'
9" x 300'
10" x 300'
11" x 300'
12" x 300'
14" x 300'
15" x 300'
16" x 300'
18" x 300'
20" x 300'
24" x 300'
30" x 300'
36" x 300'
48" x 300'
60" x 300'
ITEM NO.
SIZE
LYAT2
LYAT3
LYAT4
LYAT5
LYAT6
LYAT7
LYAT8
LYAT9
LYAT10
LYAT11
LYAT12
LYAT14
LYAT15
LYAT16
LYAT18
LYAT20
LYAT24
LYAT30
LYAT48
2” x 300’
3” x 300’
4” x 300’
5” x 300’
6” x 300’
7” x 300’
8” x 300’
9” x 300’
10” x 300’
11” x 300’
12” x 300’
14” x 300’
15” x 300’
16” x 300’
18” x 300’
20” x 300’
24” x 300’
30” x 300’
48” x 300’
High Tack. High grade saturated paper backing with superior adhesive technology.
Designed for use over ready-to-apply graphics or where large areas of exposed liner are
present. This product offers superior adhesion to liner.
ITEM NO.
SIZE
LYATR592U2
LYATR592U3
LYATR592U4
LYATR592U6
LYATR592U8
LYATR592U10
LYATR592U12
LYATR592U14
LYATR592U15
LYATR592U16
LYATR592U18
LYATR592U24
LYATR592U30
LYATR592U36
LYATR592U48
LYATR592U60
2.25” x 300’
3.25” x 300’
4.25” x 300’
6.5” x 300’
8.5” x 300’
10.5" x 300’
12” x 300’
14” x 300’
15” x 300’
16” x 300’
18” x 300’
24” x 300’
30” x 300’
36” x 300’
48” x 300’
60” x 300’
Clear 1310
TransferRite Ultra clear boasts a
unique rubber-based adhesive system that provides
superior adhesion to liner.
The 4 mil polypropylene film
offers improved clarity,
dimensional stability and an
adhesive system that will not haze vinyl.
ITEM NO.
SIZE
LYATR1310U2
LYATR1310U4
LYATR1310U6
LYATR1310U8
LYATR1310U10
LYATR1310U12
LYATR1310U14
LYATR1310U15
LYATR1310U18
LYATR1310U20
LYATR1310U24
LYATR1310U30
LYATR1310U48
LYATR1310U60
2" x 300'
4" x 300'
6" x 300'
8" x 300'
10" x 300'
12" x 300'
14" x 300'
15" x 300'
18" x 300'
20" x 300'
24" x 300'
30" x 300'
48" x 300'
60" x 300'
Vinyl Application
Vinyl Racks
Free Standing Vinyl
Floor Rack
• Strong, bolt together
construction
• Holds a total of 44 – 15”
and 30” rolls
• Store and organize vinyl,
masking tape, transfer
tape and packing supplies
• 74”H X 32”W X 18.5”D
• Durable black powder
coat finish
VRAFS ................................................$208.00
Chrome Plated
Floor Stand
• Made of heavy gauge wire
• Holds 72 rolls of 3” core
diameter material
• Holds up to 2000 pounds
total
• Unit has 9 ball caster rollers
VRAFS7230 ........................................$580.00
Media Racks
Floor Rack "Chrome
Plated"
Wall Mount Vinyl
Storage Rack
• Double welded loops
and bolt together
construction
• Holds a total of 16 –
15" & 30" rolls
• Pre drilled mounting
holes
• 25.5" x 24.25" W x 15" D
• Durable black powder coat finish
VRAHD .................................................$56.10
Short Roll Wall Mount
Vinyl Rack
• Light duty wall mount
• Holds a total of 16 –
15" rolls
• 1/4" round rod, welded
construction
• Includes four adjustable hangers for
mounting to wall
• 27.75" H x 21.75" W x 8" D
VRAFR1623 ........................................$155.49
VRA ......................................................$36.00
CA’Roll’Sel Rolling Roll
Holdet
• 300 lb. capacity
• Holds 7 rolls up to 7”
diameter
• Rolls on 7 heavy duty casters
• Models for 2” and 3” cores
Application Tape Tool
VCRS2Y.....................for 2” core..........$69.50
VCRS3Y.....................for 3” core..........$69.50
The Quick & Easy Way
To Apply Application-Tape To
Vinyl - Flawlessly!
• Holds transfer tape straight and steady.
• Single shaft and double shaft models
available.
• Guaranteed to save you time and
material.
• Each shaft holds one or several tape sizes
simultaneously.
• Made to fit standard 3" tape cores.
• 4 sizes to choose from: 16", 24", 36" and
48" width.
• No tools needed to change rolls of tape.
• Lifetime Warranty. All steel construction.
• Made of heavy guage and constructed to
hold up to 1000 pounds
• Holds 16 rolls of 2” or 3” core diameter
material
• Durable enough to hold up to 72 inch
wide material with ease
• Rack comes with 16 high impact plastic
rings that prevent material damage while
storing on the rack.
• Unit has 9 ball caster rollers to allow easy
movement with the rack fully loaded
Roller Tray
ITEM NO.
DESCRIPTION
LYATTS16S
LYATTS16D
LYATTS24S
LYATTS24D
LYATTS36S
LYATTS36D
LYATTS48S
LYATTS48D
16"
16"
24"
24"
36"
36"
48"
48"
PRICE
Single Shaft
Double Shaft
Single Shaft
Double Shaft
Single Shaft
Double Shaft
Single Shaft
Double Shaft
$229.95
$299.95
$239.95
$309.95
$249.95
$319.95
$259.95
$329.95
Designed to allow the rolling out of any
width material up to fifty (50) lbs. The user
can unroll or re-roll material without any
effort and eliminates the possibility of any
material damage. It can also be used as roll
feed roller for sprocketed and nonsprocketed drum cutter/plotters.
VRT.....................................................$129.95
69
70
Vinyl Application
Squeegees
Plastic Squeegee
Wide Format Squeegee
1-1/2” Rivet Brush
Regular white squeegee,
helps eliminate bubbles.
The industries original,
application tool &
squeegee. Featuring highstability twin ribs for easy handling and pressure control.
1-1/2” diameter hardwood handle,
with short stiff bristles, aids
in applying pressure-sensitive materials to rivets
and compound curves.
• Ribbed profile, redial corners
• Poly, Nylon, & Teflon blends
• Designed for wide format graphics
VSQ6O ......................6” .........................$1.89
VSQ12O ....................12” .......................$4.45
VZ0015 ...................................................$8.99
Size: 4" x 2-3/4"
VBASQUEESE .............................................90¢
Blue Felt Squeegee
This squeegee with a soft,
smooth felt edge protects the
vinyl from scratches during
application.
VZ1058-S................................................$4.71
100% Felt
Squeegee
VZ1059-S................................................$5.55
3M Nylon Squeegee
These gold colored squeegees
made by 3M lasts much longer.
Size: 4" x 2-3/4"
VZQ4G....................................................$3.20
3M Low Friction Sleeve
Provides multiple clean new
edge surfaces by simply
rotating the sleeve around
the Squeegee. Great for digital prints and specialty vinyl.
5 per pack
VZ0060 ...................................................$4.54
12" Felt Edge Wrapped
Squeegee
Helps protect vinyl
from marring and
scratching. Saves
time and money by frequently eliminating
the need to “ wrap” a Squeegee, or using a
premask.
• Felt helps protect vinyl
• Terrific for dry applications w/o pre-mask
VSQ12BL.................................................$5.94
EZ Grip Squeegee
Handle
Lightweight yet adds
needed rigidity to
squeegee edges.
Ergonomical design allows for full blade
pressure and contact with less wrist strain.
Great for wide format squeegees
Fits 4", 6", and 12" squeegees
VSQEZG4 ..................4” .........................$4.95
VSQEZG6 ..................6” .........................$6.95
VSQEZG12 ................12”.....................$12.15
3” Rivet Brush
3” diameter hardwood
handle, with short
bristles aids in
applying pressuresensitive materials to
large textured areas such
as, brick, cement, stucco, banners, etc. Also
used when applying graphics to vehicles.
VZ0016.................................................$13.99
Power Grip Multi-Pin Air
Release Tool MPP-1
This tool helps
you save time
during installation because the
multiple pins require
only a single puncture per rivet. The tool has
an ergonomically designed grip for added
comfort.
LY3MMPP1 ...........................................$43.75
Power Grip Magic Pad
Rivet Applicator CMP-1
This applicator can be
used to help apply
graphic films over
rivets.
LY3MCMP1...........................................$15.90
3” Vinyl
Roller
Applicator
Aluminum Handle
Needle Point Awl
6” x 5/16”, 1/32”
This roller is used to easily roll out
any bubbles which may exist after viny
is applied to substrate.
VZ1006-S..............................................$23.54
Used for making holes in vinyl to allow air
trapped in bubbles to escape.
LYE30604................................................$2.80
Vinyl Application
Application Fluid
Action Tac®
Application Fluid
Ready to use vinyl application
fluid for applying pressure
sensitive vinyl and decals to
most surfaces.
Spray cap included with the
1 quart bottle.
VASATQT...................Quart.....................$7.76
VASATGAL ................Gallon .................$21.65
Splash Concentrated
Application Fluid
Concentrated Splash is the most cost
effective application fluid on the
market. Supplied in 8 oz. plastic bottles which dilute to make one gallon
of vinyl application solution.
VASSPL .................................................$11.60
Decal-Graphic
Solution
This 3-in-1 easy-to-use formula: cleans and prepares the
surface without leaving any
residue … it then "floats" the
vinyl providing ample time to
reposition (straighten) graphics …
and it activates the adhesive to create a
strong bond between surface and graphic
without need for heat gun or lamp.
VASDGSQT ................Quart ..................$10.80
VASDGSGAL..............Gallon .................$24.75
Spray Bottle
All-purpose plastic bottle with spray
cap. Holds one quart.
LYSB........................................................$4.31
Vinyl Edge Sealer
71
Vinyl Remover
3M 94 Primer
Tape and adhesives adhesion
promoter. Also used to seal
vinyl edges.
LY3MTP94QT ........................................$26.53
Edge Sealing
Compound 902
Rapid Remover
For removing adhesives
quickly without damage or
mess. Removes adhesive glue
left over by decals and vinyl
graphics.
Spray cap included with the 1 quart bottle
Liquid, solventbased sealer
protects exposed edges of slip-resistant
tapes and treads from excessive moisture or
liquids. One 5-ounce tube with convenient
tube applicator seals approximately 75 to
100 linear feet. 5 ounce tube.
VARRRQT ..................Quart ..................$15.27
VARRRGAL................Gallon .................$39.46
LY3MEDGE902........................................$7.73
Adhesive remover for clean-up of
over spray and adhesive build up.
Fresh citrus scent.
Edge Seal Pen
Seal the edges of
your vinyl lettering. Graphics will not curl off even if the lettering is excessively washed and polished.
SGESP.....................................................$9.63
3M Adhesive
Remover
VAR604024 ..........................................$14.44
Quick 'n Easy
Adhesive Remover
Leaves clean surface (no gooey
mess) like: mounting tapes,
spray tac, ghost lines, art wax,
tree sap, tar, oil & adhesives left
behind after decals/graphics or vinyl letters
are lifted. Safe on glass, vinyl, painted surfaces, plastics.
VARQEQT .............................................$15.47
Vinyl-Off Vinyl Remover
A BREAK THROUGH product in the Vinyl
and Adhesive Removal Field.
Designed to penetrate the
vinyl and weaken the adhesive. Removes vinyl graphics
from fleet trucks, glass, signage, etc. Just wipe it on,
wait a few minutes, and peel
off the vinyl-and the adhesive- in one step!
VARVO8 ....................8 oz. Spray ............$8.78
VARVOQT..................Quart ..................$20.93
VARVOGAL................Gallon .................$64.80
72
Vinyl Application
Heat Gun Tool
Eraser Tool
Chizler Vinyl
Removal Tool
1220 HS
MBX Vinyl Zapper
Dual heat selection – 750 degrees
F and 1000 degrees F.
Power: 1200 Watts / 4100 BTUs.
A must have for any sign
shop. Use this tool with the
eraser wheel to quickly remove
pin-stripes and decals. You
name it, the MBX removes it
in seconds. Does not include
the eraser wheel.
HDHG1220HS .......................................$33.71
Available in electric or pneumatic version.
Industrial 750
MT-ME3200 ..............Electric..............$429.00
MT-MP3500 ..............Pneumatic.........$399.00
Use for fast, easy, one-step paint
removal and dozens of other uses. Includes
a hanging hook.
Variable heat selection,
500-750 degrees F.
Professional quality heat gun
features maximum BTU heat
output, high air flow, fast
heat transfer, and heavy
duty all-metal construction.
One sized polycarbonate
tool has proven invaluable for
removing materials and applying others in
tight corners. Custom rolled edges scrapes
without marring.
Rubber Eraser Wheel
1.2” wide. Comes in a pack of 3.
MT-RE0023...........................................$30.00
HDHG750 .............................................$67.82
HT1100
HDHGHT1100 .......................................$48.69
VARBE ................................................$142.50
Two temperature settings 750° F. and 1000°
F. Contains accessories that are necessary to
heat and strip paint from a surface.
Included: Concentrator nozzle, spreader
nozzle, glass protector nozzle, a handle
with five multi-shaped scraper blades and a
rugged storage case.
HT3500
Touch-pads activate 12 distinct temperature settings from 250° to 1350° F.
enabling the user to match
the correct temperature to
the application. Two fan speeds for optimum air flow control. Cool-down and automatic shut-off setting.
HDHGHT3500 .......................................$53.60
Need help selecting the best
product? What’s the best way to
remove a particular vinyl? Our
“signology” experts will
be happy to
provide you
with clear, concise answers –
just ask!
Double-Edged plastic blade
that is strong in design
and fits any standard
razor holder. Designed to
aid in the removal of pressuresensitive materials on surfaces
that are easily scratched. Comes with a
blade holder. 25 per pack.
Metal Safety Glass
Scraper
Comes with 5 single
edge blades for removing paint, stickers on
windows and doors.
HDGS......................................................$2.20
Single Edge Blade #9
Replacement blade for HDGS, HDCK
Size: 1-1/2” x 3/4” x 1-1/2”
edge. 100 pack
LYRBB .....................................................$7.25
Lift-Stick
Questions?
Digital Heat Gun
Plastic Razor Blades
LYPRB .....................................................$9.29
Big Eraser Vinyl
Remover
Take off vinyl lettering or graphics
10 times faster
than the old hand
method. Made of soft urethane blended
rubber, the big eraser fits on any polishing
buffer or variable speed sander with a standard 5/8 inch threaded shaft. Includes Big
Eraser, 4oz. bottle of adhesive remover and
5 plastic razor blades. Sander/Polisher not
included.
Heat Gun Kit
VSQCH .......................................................93¢
Used to aid in the lifting of
pressure sensitive
material and the
removal of adhesive from surfaces. If used
correctly, it will not scratch the substrate.
3/4" x 6".
VSQLS ........................................................50¢
Knife & Pick Holder
VZ1012-S................................................$4.26
Vinyl Application
Handle Knife
Round Aluminum
Handle
5/16" x 4-3/4" L. Used for precision cutting,
trimming and striping of paper, plastic,
wood, cloth and film.
LYAH .......................................................$2.26
Grip-On Non-Roll Soft
Handle Knife
5” x 3/8” features include comfortable soft
grip handle.
LYEK18....................................................$3.24
Art/Graphics
Snap Blade Knife
Snap Blade Knife
Olfa SAC-1
The ultra-slim design of this stainless steel
graphics cutter makes it a popular choice
for professional graphic artists and signmaking professionals. Features a slide lock
and pocket clip/blade snapper.
LYOSAC1.................................................$9.49
Retractable Knife
VZ1062-S................................................$5.64
Replacement Blades
Standard-duty, acute angle snap-off
replacement blades. 7 cutting edges per
blade strip.
For LYAH and LYEK18.
1-9/16” x 1/4” x 1” edge.
Box of 100.
LYOA1160B.............................................$6.39
For LYAH16.
17⁄16” x 1/4” x 5/16” edge. 5 pack.
LYER20024..............................................$1.75
Olfa 180
Perfect for general
home/office use for light-duty cutting jobs.
Features a slide lock, pocket clip and built-in
blade snapper.
Olfa SVR-1
Stainless Steel Cutter
Replacement Blades
#11 Blade
#24 Blade
LYBAH ........................................................75¢
LYO180 ...................................................$3.29
LYAH16 ...................................................$1.50
LYB11 ...................................................$21.28
Comes with 13 point snap blade for home,
office, industrial use, cutting
of paper, plastic, wood and other items.
Light Duty Snap Blade Knife
Medium Duty Handle
7/16" x 4-3/4" L. Used for precision cutting,
trimming and striping of paper, plastic,
wood, cloth and film.
Light Duty
Snap Blade Knife
Perfect for use in moist environments (wall
papering, window tinting, etc.) where rust
is a concern. Slim design, features a slide
lock and pocket clip/blade snapper.
LYSVR1....................................................$6.79
Heavy Duty
Snap Blade Knife
Snap Blade Knife
Replacement Blades
Standard-duty replacement blade for
LYBAH. 13 cutting edges per blade.
Steel Blades
Rotary Cutter
Comes with 7 point snap blade
used for cutting and trimming.
LYBAHL ...................................................$1.55
Comfortable ergonomic handle and a dualaction safety lock. Cuts fabrics or paper into
shapes, strips and pieces for sewing, quilting
and craft projects. 28mm size is great for
small scale projects, miniatures, and tight
corners. For right- and left-handers.
LYORTY1DX ...............28mm ..................$17.59
LYORTY2DX ...............45mm ..................$19.99
Replacement Blades
Heavy duty replacement blade.
8 cutting edges per blade
LYAB10B....................10 pack .................$3.37
LYAB50B....................50 pack...............$14.79
Stainless Steel Blades
LYAB10S ....................10 pack .................$6.99
LYAB50S ....................50 pack...............$27.49
Vinyl Cutter
Steel Blades
LYOLB10B..................10 pack .................$6.39
LYOLB50B..................50 pack...............$22.79
VZ1060-S................................................$5.81
73
74
Vinyl Application
Tweezers
4-1/2” Curved Point
Tweezer
Features include a sharp curved point, fingertip ribs along the holding area and
alignment pin for precision and accurate
control for hobbyists and professional
craftsmen.
LYE30410................................................$3.68
6” Curved Point
Versatile and useful tweezers with curved
point, alignment pin and ribbed holding
area for reaching and working in normally
unreachable areas.
Tools for Vehicle Wrapping
Super Strong
Magnets
TS4000T
Welding Torch
Used by vehicle wrappers
when preparing and
alligning graphics to
vehicle. These strong magnets eliminate the
use of masking tape. Comes in a set of two.
Durable, replaceable solid
brass tip produces a swirl
flame for maximum heat output. Lock button allows finger-free use. Pressure-regulated to burn in all directions.
Cast-aluminum body with
stainless steel burn tube. This
model has adjusting knob for optimal gas
consumption and heat output.
VZ1063.................................................$25.46
Tool Belt
This professionally
designed tool-belt by
Avery will hold all your
tools. Also has a metal
plate for magnets.
VZ1061.................................................$28.26
LYE30415................................................$4.28
4-3/4” Sharp Pointed
Tapered shanks for accurate control, for
holding and inspecting small objects.
LYETW.....................................................$3.68
BEN-TS4000T........................................$39.95
Disposable
Propane
Cylinders
All Purpose Rags
For basic use with torches.
Strong for tough jobs. Absorbs
like a sponge. 200 count.
BEN-TX9 ........14.1 oz. ...........................$5.84
BEN-TX916 ....16.4 oz ............................$6.86
VCR ......................................................$14.35
75
Accessories
Paper
Tape
Marking
Scotch-Blue™ Painters
Masking Tape
Black Charcoal
20 Lbs.
#2090
This high quality extra white paper provides
an improved image when plotting with felt
pens. Because of the high density of this
paper, pouncing holes are much more uniform and provides improved durability in pin
registration.
This tape removes cleanly without adhesive
transfer or surface damage for up to 14
days, even in direct sunlight. It is a medium
adhesion tape that is ideal for painted walls
and trim, woodwork, glass and metal.
LYCC .........................#8 ..........................$8.99
LYCC9 .......................Jumbo #9.............$23.95
White Sign Writer
Poster Paper,
ITEM NO.
SIZE
PA2012
PA2018
PA2024
PA2030
PA2036
PA2042
PA2048
PA2060
12 x 50 yds
18 x 50 yds
24 x 50 yds
30 x 50 yds
36 x 50 yds
42 x 50 yds
48 x 50 yds
60 x 50 yds
PRICE
$6.89
$9.40
$12.75
$15.61
$18.70
$21.91
$24.99
$31.16
Punched
White Paper
ITEM NO.
SIZE
LYCP20
LYCP30
15” x 500’
30” x 300’
ITEM NO.
SIZE
LY3M209034
LY3M20901
LY3M20902
3/4" x 60 yds.
1" x 60 yds.
2" x 60 yds.
PRICE
$2.95
$3.89
$7.66
Masking Tape
ITEM NO.
SIZE
PRICE
LYMT3/4
LYMT1
LYMT1-1/2
LYMT2
LYMT3
3/4"
1"
11⁄2"
2"
3"
$1.23
$1.75
$2.28
$3.08
$4.55
Stabilo
Pencils
The STABILO All can do
just about everything.
And not just on paper.
Also writes on glass, plastic & metal.
ITEM NO.
COLOR
LYSB8008
LYSB8040
LYSB8041
LYSB8044
LYSB8045
LYSB8046
LYSB8052
LYSB8054
#8008 Graphite
#8040 Red
#8041 Blue
#8044 Yellow
#8045 Brown
#8046 Black
#8052 White
#8054 Orange
PRICE
$12.85
$12.85
$12.85
$12.85
$12.85
$12.85
$12.85
$12.85
China Marker
PRICE
$26.25
$33.60
Lettering Tape
3/8”x180 yards
Available in Clear and Red
Brown Kraft Paper
#70 lb.
ITEM NO.
SIZE
PRICE
LYPBC24
LYPBC36
LYPBC48
LYPBC60
24”
36"
48”
60”
$27.89
$40.50
$46.05
$65.34
ITEM NO.
DESCRIPTION
LYT38CL
LYT38R
Clear, 3/8"x180yds
Red, 3/8"x180yds
PRICE
$3.00
$4.37
ITEM NO.
COLOR
LYCMBK
LYCMBL
LYCMOR
LYCMR
LYCMW
Black
Dark Blue
Orange
Red
White
PRICE
99¢
99¢
99¢
99¢
99¢
Sharpie Fine Point
LYSFPBK..................................................$8.89
Pounce Wheel
LYEP ..........................1/4” .......................$6.10
LYEPW.......................7/16” .....................$6.10
Pilot Markers
SC-6600
ITEM NO.
COLOR
PRICE
LYPSC6600
LYPSC6600BL
LYPSC6600G
Black
Blue
Green
$2.99
$2.99
$2.99
Black
Blue
Red
$2.19
$2.19
$2.19
Refill Ink
LYPSCRFBK
LYPSCRFBL
LYPSCRFR
76
Measuring Devices
L Square
Straight Edge Ruler
Extruded aluminum with clear (silver)
anodized finish. Screened, thermal-bonded
black graduations in 1/8ths and 1/16ths.
ITEM NO.
SIZE
PRICE
HDSR18
HDSR24
HDSR36
HDSR48
HDSR60
HDSR72
HDSR96
18”
24”
36”
48”
60”
72”
96”
$3.44
$4.00
$5.70
$8.40
$13.42
$15.48
$25.68
Safety Ruler
The aluminum safety
ruler has a curved
guard that will protect your fingers
when cutting. Also
has a non-slip rubber gipper material
on back that locks the ruler down.
ITEM NO.
SIZE
HDPSSR28
HDPSSR40
HDPSSR52
HDPSSR64
HDPSSR76
HDPSSR100
28"
40"
52"
64"
76"
100"
ITEM NO.
SIZE
HDLS12
HDLS24
8"x12" (#430)
16"x24" (#CS1)
T Square
Aluminum
T-Squares are
made of high quality "tempered" extruded
aluminum which will not rust. The tongue is
securely attached to the blade using four (4)
stainless steel rivets to assure accurate 90
degree angles. Easy to read numbers and
graduations.,
ITEM NO.
SIZE
PRICE
HDTS24
HDTS36
24"
36”
$21.96
$24.33
Heavy Duty T Square
PRICE
$31.96
$43.96
$63.96
$75.96
$87.96
$127.96
Extruded aluminum 3/16" thick blade
and head. Head will stay square for life
of product.
ITEM NO.
SIZE
PRICE
HDTSHD48
HDTSHD54
48"
54”
$19.90
$23.62
Nylon Coated
Tape Measures
Adjust-A-Square
• Bright yellow with
black rubber casing
• 1/8" Markings for
accurate readings
• Easy to Read Fractions
• Belt hook
ITEM NO.
SIZE
HDU81800
HDU81806
3/4" x 16'
1" x 25'
PRICE
$4.02
$7.24
PRICE
$6.29
$13.57
Extruded aluminum 1/4" thick blade and
head. Adjusts to any angle. Precision
machined head and blade lock together for
a perfect 90° angle.
ITEM NO.
HDAS48
HDAS54
SIZE
PRICE
48”
54”
$35.40
$40.82
77
Roland Vinyl Cutters
GX PRO Series
Vinyl Cutter
CAMM-1 Servo GX-24
24” Desktop Vinyl Cutter
Professional Graphics Production
The GX-24 desktop vinyl cutter offers
enhanced productivity and quality. Powered
by a digital servomotor, it achieves cutting
speeds up to 20 inches per second and maximum accuracy. Vehicle graphics, signs, decals,
labels, stencils and even pinstriping always
come out looking crisp and clean.
In addition to Roland’s legendary reliability, the GX Pro offers
enhanced versatility and ease of use. Its
ability to contour cut pre-printed
graphics lets you create professional
vehicle wraps and even heat transfers
for garments.
• Recognizes crop marks produced by a variety of print-only devices
• Accepts material from two to 27.5 inches wide
• Ideal for Vinyl, paint mask, reflective vinyls, twill, heat transfer,
and sandblast
$
00
• USB and serial connectivity
• Roland CutStudio™ Software included
List: $1,995.00
• Includes Windows printer driver, a plug-in
for Adobe Illustrator (OS 9/X for Mac) &
Stand
CorelDRAW.
$
00
• Optional stand available
•
•
•
•
•
•
1649
Blades
Generic Blades
Replaces Roland Standard Blades
ITEM NO.
ANGLE
LYCBR30
LYCBR45
LYCBR60
30º
45º
60º
PRICE
$19.95
$19.95
$19.95
MODEL
GX-300
GX-400
GX-500
Cross Cutter Blade
ITEM NO.
DESCRIPTION
US-BLADE-KB
Pack of 25
For Cast & Calendared Vinyl
ITEM NO.
CDRB45
ZEC-U1005
ANGLE
PACK
45º
45º
1
5
PRICE
$21.99
$109.99
For Detail & Small Lettering
Plotter Pens
for Roland Plotters
ITEM NO.
ZEC-U5025
ANGLE
PACK
45º
5
PRICE
$149.99
For Sandblast & Laminated Vinyl
ITEM NO.
ZEC-U1715
ANGLE
PACK
45º
5
PRICE
$149.99
For Reflective Vinyl, Flock, Twill,
Paint Protection Film
ITEM NO.
ZEC-U3050
ANGLE
PACK
60º
5
PRICE
$149.99
For Safety & Security Film
ITEM NO.
ZEC-U3100
ANGLE
PACK
60º
5
PRICE
$149.99
COLOR
LYCB9301
LYCB9302
LYCB9303
Black
Blue
Red
CUTTING SIZE
36”
46”
54”
30”
40”
48”
PRICE
$13.00
$13.00
$13.00
Blade Holders
ITEM NO.
DESCRIPTION
XD-CH3
XD-CH2
Regular
Alloy
ITEM NO.
DESCRIPTION
LYRCPS24
LYRCPS30
LYRCPS5
XD-CPS-GX3
XD-CPS-GX4
XD-CPS-GX5
for GX-24
for CM-300,CX-300
for CM-24,CX-24
for GX-300
for GX-400
for GX-500
Nut Pen Holder
Black
Assorted Colors
$49.99
$69.99
PRICE
$12.50
$12.50
$12.50
$10.00
$10.00
$10.00
Replacement Parts
A one-piece pen with a bonded fiber, or nylon plotting tip.
Comes in a 5 pack of black or a pack of
assortment containing one of each; black,
green, blue, yellow and red.
LYCBVBK
LYCBV
PRICE
All cutting strips for previous models are available.
Bolt Pen Holder
COLOR
$3,295.00
$4,295.00
$5,295.00
for Roland Plotters/Printers
Fiber Tip Plotter Pen
ITEM NO.
LIST PRICE
Cutter Protection Strip
Designed with a special
high pressure reservoir to
maintain smooth ink flow
while plotting at high speeds. The large
reservoir provides 4 miles of plotting usage.
ITEM NO.
MEDIA SIZE
PRICE
$5.95
9300 Series
High-Strength Carbide Blades
Price!
Available in the following sizes:
249
for Roland Plotters/Printers
Cutting material up to 33” per sec.
Max down force of 350 grams
USB and serial connectivity
Optical registration system facilitates accurate contour cutting
Roland CutStudio™ Software included
Plug-ins for Adobe® Illustrator and CorelDRAW® Call for
CDRSP-21815101 ...................................$4.50
PRICE
$17.24
$17.24
CDRSP-22285503 ...................................$3.00
Pinch Roller
CDRSP-21565102...for side ..................$29.95
CDRSP-21565103...for center...............$39.95
Pinch Roller Lever
CDRSP22145616 ....................................$5.00
78
Graphtec Vinyl Cutters
Craft ROBO Pro
FC8000 Series
15” Professional,
Portable Media Cutting Plotter
High-Performance Cutting Plotters
Cutting Plotter Controller
Software Utility
Perfect for all kinds of media cutting
applications including vinyl, heat and
image transfers, contour cut (die cut)
stickers, labels, etc.
• Maximum cutting width of 14.8
inches
• Maximum speed up to 16 inches per second
• Cutting force up to 300gƒ
• Automatic Registration Mark Sensor
• Control functions of the FC8000 from
your computer
Next Generation ARMS System
(Auto Registration Mark Sensor)
99900
$
• Sensitivity adjustment for registration
mark detection on various media and
colors
• Optical sensor for auto alignment
Three Step Push-Roller Pressure Settings
• Strong (ie: sandblast mask, high-intensity reflective)
• Medium (ie: vinyl)
• Light (ie: window tint film) *standard with FC8000-100, -130 & -160
CE5000 Series
Engineering Class Cutting Plotters
USB 2.0, RS-232 Serial & Optional Ethernet Interface
CE5000 is Graphtec’s leading price/performance
cutter. Providing an ideal solution for cutting a wide variety of materials. Available
in two sizes—48” & 24”.
•
•
•
•
•
• Ethernet Interface allows for one PC to run multiple FC8000s
Dual Configuration Function
• Two different users can set & save independent
settings for customized jobs on a single FC8000
machine
Fast & Accurate Digital Servo Motors
4-Point, Dual-Axis Skew Correction
Tangential Control enhances precision
ROBO Master Pro with Auto Tracing
Cutting Master 2 plug-in software—PC
& Mac
MODEL
SIZE
LIST PRICE
CE5000-60
CE5000-120
24”
48”
$1,795
$3,295
Call for
Price!
Available in the following sizes:
MODEL
Call for
Price!
FC8000-60
FC8000-75
FC8000-100
FC8000-130
FC8000-160
MEDIA SIZE
CUTTING SIZE
LIST PRICE
30”
36”
48”
60”
72”
24”
30”
42”
54”
64”
$2,995
$3,995
$4,995
$5,995
$6,995
FC2250 Series - Large Flatbed With ARMS
The FC2250 Large Format flatbed cutting plotter is available in 3 table sizes — 24"x36",
47"x36" and 68.5"x36" table sizes, with optional tool head configurations and material
hold-down systems. Dual Head Design features 500 grams and 1000 grams maximum down force for more efficient marking and cutting workflows.
The FC2250 large format flatbed cutting plotters are ideal for designers and prototyping in the offset printing, digital printing, packaging industry, fashion industry, as
well as road sign making, stone & glass sandblasting/etching, electronic film industry,
etc.
•
•
•
•
•
•
•
Dual Head Design: 500/1000 grams Cutting Force
3 Media Hold down methods available: Electrostatic, Vacuum or Magnetic
Operate in Horizontal or Inclined Model (Vacuum table-horizontal only)
D-Cut Software imports DXF Data
Cutting Master Plug-in for Adobe Illustrator©
0.118" (3mm) Blade for cutting thicker material up to E FLute
New Optional Creasing Tool for Corrugated Media
List price starting at
12,99500
$
79
Graphtec Vinyl Cutters
Blades & Blade Holders
Plotter Pens
for Graphtec Plotters
for Graphtec Plotters
9500 Series
0.9mm Supersteel Blade
Standard blade for cutting media ut to 0.25
mm thick.
For cutting media from 0.25 mm to 0.5 mm
thick. The 30º is suitable for cutting media
up to 1.5 mm thick.
ITEM NO.
ANGLE
CDGCB9
CB09UA-5
CB09UA-2
45º
45º
45º
PACK
PRICE
1 pack $33.25
5 pack $160.00
2 pack $71.50
0.9mm, Blue Top
Blade Holder
ITEM NO.
TIP
CDGBH9
PHP31-CB09-HS
Black ABS Tip $97.00
Brass Tip
$127.50
PRICE
0.9mm Carbide Tipped Blade
Replaces Graphtec Standard Blade. No spring
included.
ITEM NO.
ANGLE
PACK
PRICE
LYCB1945
LYCB1960
45º
60º
1 pack
1 pack
14.95
14.95
ITEM NO.
ANGLE
CDGCB15U
CDGCB15U-5SP
CB15U-2
CDGCB15U-K30-5S
CDGCB15UK30
45º
45º
45º
30º
30º
PACK
PRICE
1 pack $45.00
5 pack $213.50
2 pack $92.00
5 pack $295.50
2 pack $119.00
For cutting small characters that are less
than 10mm.
ANGLE
CB15UB-2
PACK
ITEM NO.
ANGLE
CB15U-K20-2SP
20°
PACK
PRICE
2 pack $172.00
1.5mm, Green Top
Blade Holder
for CB15 SP blades
ITEM NO.
TIP
PHP31-CB15B-HS
Brass Tip
PRICE
PRICE
ANGLE
PACK
45º
45º
30º
30º
5 pack
2 pack
5 pack
2 pack
CDGBCB15UA-5
CDGBCB15UA-2
CB15UA-K30-5
CB15UA-K30-2
PRICE
$356.00
$148.00
$374.50
$158.50
1.5mm, Red Top
Blade Holder
MODEL
TIP
CDGTSCE1000
CDGTSCE1000-120
CDGTS4100
CDGTS4100-100
CDGTS4100-130
CDGTS5100-75
CDGTS5100-130
CDGTS5100-150
CE Series 24”
CE Series 48”
FC4100-75
FC4100-100
FC4100-130
FC5100-75
FC5100-130
FC5100-150
$25.50
$31.00
$25.00
$30.00
$35.00
$25.50
$36.00
$41.00
COLOR
CDGB53001-069
Black
PRICE
$13.00
$13.00
$13.00
PRICE
$15.50
Fiber Tip Pen
5 pack.
ITEM NO.
CDGCPFT
KF550-S1
PRICE
CDGBH15
CDGBH15S
Black ABS Tip $97.00
Brass Tip
$127.50
$127.50
PRICE
ITEM NO.
KF550-F8
ITEM NO.
COLOR
PACK
PRICE
Black
5 $31.00
2 Black, 1 Red,
1 Blue, 1 Green
5 $31.00
1ea. Black, Red, Violet,
Brown, Blue,Green,
Orange, Pink
8 $46.00
Cross Cutter Blade
Teflon Cutting Mat for Graphtec Plotters
ITEM NO.
Black
Blue
Red
1.5mm, High-intens, Reflective
ITEM NO.
Recommended for cutting sandblast rubber
up to 2.5 mm thick. (FC8000)
COLOR
LYCB9501
LYCB9502
LYCB9503
2 pack $205.00
For cutting high intensity reflective media.
ITEM NO.
Ball Point Pen
ITEM NO.
Designed with a
special high pressure
reservoir to maintain
smooth ink flow while
plotting at high speeds. The large reservoir
provides 4 miles of plotting usage.
For FC8000, FC7000Mk2, FC7000
ITEM NO.
MODEL
51407-145
CDGTSCE7000-75
CDGTSCE7000-100
CDGTSCE7000-130
CDGTSCE7000-160
60
75
100
130
160
PRICE
$22.50
$25.50
$31.00
$36.00
$41.00
All cutting strips for previous models
are also available.
ITEM NO.
DESCRIPTION
CT01H
CT02U
Standard
Supersteel
PRICE
$25.50
$98.50
Pinch Roller
For all Graphtec Plotters
ITEM NO.
CDGSP5095002122
PRICE
$23.91
80
Cutter Blades & Pens
Carbide Plotter Blades
For vinyl with standard thickness, a 45º blade will usually
be used, a 30º blade for less
than 4 mil thickness,
and a 60º blade for
12+ mil thickness
i.e. reflective material.
This is only a guide and
may vary by plotter.
SC-1100 Series
ITEM NO.
LYCB1130
SC-1000 Series
ITEM NO.
ANGLE
LYCB1145
LYCB1160
30º
60º
PRICE
$21.45
$21.45
SC-1200 Carbide Series
TARGET PLOTTERS:
• TC-1101 / TC-1102
Turbo Cut Tools
ITEM NO.
ANGLE
LYCB1230
LYCB1260
30º
60º
PRICE
$20.35
$20.35
SC-1300 Carbide Series
TARGET PLOTTERS:
• Allen Datagraph 936/800
• CSR Ecom-2 • Anagraph - EMS
• Vinyl Express • Roland (all)
ITEM NO.
ANGLE
LYCB1330
LYCB1345
LYCB1360
30º
45º
60º
PRICE
$21.45
$21.45
$21.45
SC-1400 Series
TARGET PLOTTERS:
• Techno-Arts Switchblades
• Classic
• Loline Studio 7/8 Artpro Series / Super 88
ITEM NO.
ANGLE
LYCB1430
LYCB1445
LYCB1460
30º
45º
60º
PRICE
$15.40
$15.40
$15.40
$11.00
$11.00
$11.00
ITEM NO.
ANGLE
LYCB1530
LYCB1545
LYCB1560
30º
45º
60º
ITEM NO.
ANGLE
LYCB1630
LYCB1645
LYCB1660
30º
45º
60º
PRICE
$24.20
$24.20
$24.20
SC-1900 Series
TARGET PLOTTERS:
• American Graphtec Cutting
Pro / FC-Series
ITEM NO.
ANGLE
LYCB1945
LYCB1960
45º
60º
PRICE
$19.25
$19.25
SC-2000 Series
TARGET PLOTTERS:
• Mimaki CG-Series
• New Star
ITEM NO.
ANGLE
LYCB2037
LYCB2040
LYCB2056
37º
40º
56º
PRICE
$22.00
$22.00
$22.00
SC-2100 Series
TARGET PLOTTERS:
ITEM NO.
ANGLE
LYCB2135
LYCB2160
35º
60º
PRICE
$21.45
$21.45
SC-2200 Series
TARGET PLOTTERS:
• Zeta CP30 / CP 3015
ITEM NO.
ANGLE
LYCB2245
LYCB2260
45º
60º
PRICE
$23.65
$23.65
SC-2700 Series
• Loline 5000
• Techno-Arts Bladerunner
• Signature 45
PRICE
• Houston-Inst. DMP Series
• HTD Destiny 4000 • Vytek 500 / 1000
• Newing-Hall • Accutrac 439 • Jorlink
• Aristo AR-20/AR-50
Lettering systems, AG-50
AG-75 AG-130 Signline Series
TARGET PLOTTERS:
• Gerber III/IV, S/750 Sprint
Series Lettersmith
• Anagraph Excel 1/1m
• Compugraphicarty
30º
45º
60º
PRICE
$21.45
SC-1500 Series
TARGET PLOTTERS:
LYCB1030
LYCB1045
LYCB1060
30º
• TC-1100 Turbo Cut Tool
ITEM NO.
ANGLE
ANGLE
TARGET PLOTTERS:
Accutrac 439 ............................................SC-1600 Series
Allen Datagraph 936/800 .........................SC-1300 Series
Anagraph Excel-5/Excel-2, Excel-EM ........SC-1200 Series
Anagraph AE-Series..................................SC-3600 Series
Anagraph Excel 1/1m ...............................SC-1000 Series
Anagraph-EMS .........................................SC-1300 Series
Aristo AR-20/AR-50 Lettering Systems
AG-50, AG-75, AG-130,
Signline Series ..........................................SC-2100 Series
Compugraphy...........................................SC-1000 Series
CSR Ecom-2..............................................SC-1300 Series
Gerber DCS 1500......................................SC-4700 Series
Gerber Emboss Track ................................SC-3800 Series
Gerber GSX...............................................SC-2700 Series
Graphic CE/FC-Series................................SC-1900 Series
GRI ...........................................................SC-3300 Series
Houston-Inst. DMP Series.........................SC-1600 Series
HTD Density 4000.....................................SC-1600 Series
Ioline 5000 ...............................................SC-1500 Series
Ioline Studio 7/8 Artpro Series/
Super 88 ...................................................SC-1400 Series
Jorlink.......................................................SC-1600 Series
K-Cad Cal-Comp.......................................SC-3700 Series
Mimaki CG-Series.....................................SC-2000 Series
Mutoh SC-Series.......................................SC-4100 Series
Mutoh XP-Series.......................................SC-3800 Series
Newing-Hall..............................................SC-1600 Series
Roland (all)...............................................SC-1300 Series
Summagraphics D-Series ..........................SC-3300 Series
TC-1100 Turbo Cut Tool ............................SC-1145
TC-1101 / TC-1102 Turbo Cut Tools ..........SC-1130
Techno-Arts Bladerunner ..........................SC-1500 Series
Techno-Arts Switchblades.........................SC-1400 Series
Vytek 500 / 1000......................................SC-1600 Series
Zeta CP30/CP3015....................................SC-2200 Series
ITEM NO.
TARGET PLOTTERS:
• TC-1101 / TC-1102
Turbo Cut Tools
Blade Index
MODEL
SC-1600 Series
TARGET PLOTTERS:
TARGET PLOTTERS:
PRICE
$11.00
$11.00
$11.00
• Gerber GSX, GXX-Plus,
HS Swivel
ITEM NO.
ANGLE
LYCB2742
LYCB2760
42º
60º
PRICE
$26.40
$26.40
81
Cutter Blades & Pens
Carbide Plotter Blades
SC-3800 Series
SC-3300 Series
TARGET PLOTTERS:
TARGET PLOTTERS:
• Mutoh XP-Series
• Gerber Emboss Track, Invision
• Summagraphics D-Series
• GRI
ITEM NO.
ANGLE
LYCB3335
LYCB3360
35º
60º
PRICE
$15.10
$15.10
SC-3600 Series
LYCB3645
LYCB3645
45
60º
ANGLE
LYCB3830
LYCB3845
LYCB3860
30º
45º
60º
PRICE
$22.00
$22.00
$22.00
• Mutoh SC-Series
• Gerber Fast Track
PRICE
$21.45
$21.45
ITEM NO.
ANGLE
LYCB4130
LYCB4145
LYCB4160
30º
45º
60º
SC-3700 Series
SC-4700 Series
TARGET PLOTTERS:
TARGET PLOTTERS:
• K-Cad Cal-Comp
PRICE
$19.25
$19.25
$19.25
ANGLE
LYCB3745
LYCB3760
45º
60º
TC-1100
TARGET PLOTTERS:
TC-1101
TARGET PLOTTERS:
• Gerber III, IV, IVA Series
One SC-1130 blade is included
LYCBTC1101.......................................$225.00
TC-1102
TARGET PLOTTERS:
• Gerber DCS 1500
ITEM NO.
Allows cutting at 2x to 4x the normal
speed! This unique tool holder is engineered with a high-tech precision ball bearing swivel unit, permits cutting of materials
in the "pen-plot" mode. Best results are
achieved when cutting 1" letters and up.
• Gerber IVB, S/750 Sprint Series
Lettersmith, GS-15
One SC-1145 blade included.
LYCBTC1100.......................................$225.00
TARGET PLOTTERS:
• Anagraph AE-Series
(Anagraph Express)
• Elite
ANGLE
ITEM NO.
SC-4100 Series
TARGET PLOTTERS:
ITEM NO.
Tool Blade Adapter
PRICE
ITEM NO.
ANGLE
$8.25
$8.25
LYCB4745
LYCB4746
45º
60º
PRICE
$23.20
$23.20
• Anagraph Excel-5, Excel-EM
One SC-1130 blade is included
LYCBTC1101.......................................$225.00
Plotter Pens
Designed with a special high pressure reservoir to maintain smooth ink flow while plotting at high speeds.
SP-9000 Pen Series
TARGET PLOTTERS:
• Gerber Signmaker Graphix 4 / 4B / 4E
• Gerber Sprint
• Gerber S / 750
• Gerber Graphix 2
• Anagraph Excel 1 / 1m
ITEM NO.
COLOR
PRICE
LYCP9001
LYCP9002
LYCP9003
Black
Blue
Red
$3.25
$3.25
$3.25
SP-9100 Pen Series
SP-9200 Pen Series
SP-9500 Pen Series
TARGET PLOTTERS:
TARGET PLOTTERS:
• Graphtec
• Anagraph AE-70/100
Anaexpress
• AnagraphXL-5/XL-2
Replacement for 10146-01 pens.
ITEM NO.
LYCP9201
LYCP9202
LYCP9203
COLOR
PRICE
Black
Blue
Red
$10.00
$10.00
$10.00
ITEM NO.
COLOR
LYCP9501
LYCP9502
LYCP9503
Black
Blue
Red
PRICE
$13.00
$13.00
$13.00
SP-9300 Pen Series
TARGET PLOTTERS:
TARGET PLOTTERS:
• Roland • Ioline
• Gerber Emboss Track
• Allen DataGraphic
• Gerber 510 • Mutoh XP-500
• HP Draftmaster • Mamaki
• Gerber Supersprint
• Gerber HS-15, GS-15,
HS / 750 GS / 750
• Gerber Lettersmith
ITEM NO.
COLOR
PRICE
ITEM NO.
COLOR
LYCP9101
LYCP9102
LYCP9103
Black
Blue
Red
$8.50
$8.50
$8.50
LYCP9301
LYCP9302
LYCP9303
Black
Blue
Red
PRICE
$13.00
$13.00
$13.00
82
SOFTWARE
Sign Cutting & Printing
Now available
for Windows or
Mac platform
PhotoPRINT™ FAMILY
A Family of Software Solutions for
Professional Sign Making Needs
The Flexi™ FAMILY offers 5 different products for professional
sign making. Whether you are looking for a simple package for
text layout and vinyl cutting, high production features with cutting and printing tools or something in between, SAi has a software solution for you.
$
FlexiSIGN-PRO™
4,295
LIST
The SAi flagship product, offers the total solution for any Sign
Making business. With genuine Adobe® PostScript® 3 RIP engine,
ICC profile support and built-in direct drivers, FlexiSIGN-PRO offers
a complete set of design, cutting, RIPing and printing tools for
maximum productivity.
FlexiEXPERT™
LIST
2,495
$
The package for the professional sign maker who requires
advanced vinyl cutting and bitmap editing tools, without colorprinting output. FlexiEXPERT includes full design, text serialization
and color tracing features, as well as job estimating for accurate
project management and design templates for faster production.
FlexiPRINT & CUT™
LIST
2,295
$
A brand-new design, scanning and tracing software package with
complete cutting output. FlexiPRINT & CUT has the versatility to
RIP and print to two devices simultaneously. Text Styles and Job
Statistics are also included for impeccable results.
FlexiSIGN™
LIST
1,695
$
The mid-level Sign Making package provides exceptional tools to
produce high-quality signage without a large initial investment. In
addition to design, vinyl cutting, scanning and tracing capabilities,
FlexiSIGN also includes Job Statistics and Text Styles for enhanced
performance.
FlexiDESIGNER™
LIST
1,295
$
A program you can use as a second, design-only station. Get all
the design, layout and image editing features of FlexiSIGN-PRO, as
well as file preparation for output on another Flexi Family station,
without the full price investment.
FlexiLETTER™
LIST
995
$
The entry-level layout and cutting package, features file
import/export, full text manipulation and direct drivers for the
industry's most popular vinyl cutters.
MORE THAN JUST A RIP. As technology
moves forward, SA International brings you
a new era in color management. Progressing along with the large
format industry, PhotoPRINT™ 6 is designed to help your productivity ascend to new heights–—while maintaining SAi’s signature
ease-of-use interface.
PhotoPRINT SERVER-PRO™
LIST
4,295
$
The complete client-server RIP solution package includes extended
capabilities and cost-saving features. Additional features include
an EDITOR station for layout and design and Color Profiler for
output profile creation and editing.
PhotoPRINT SERVER™
LIST
3,495
$
The client-server RIP solution for networks and large production
environments, featuring productivity tools such as Job Priority,
Page Nesting and Job Nesting. These tools will make workflow to
multiple printers generate accurate and consistent results in any
volume.
$
PhotoPRINT DX™
LIST
1,595
An unparalleled layout package with design capabilities for text,
shapes and effects, combined with the versatility to RIP and print
to two devices simultaneously. The design and output of Print &
Cut decals is straightforward and accurate with this integrated
solution. Windows and Mac.
PhotoPRINT SE™
LIST
$
995
A RIP solution with the fundamentals for the single-workstation
environment. Send jobs to RIP and print directly from popular
design applications such as Adobe Photoshop® and Illustrator®,
QuarkXPress®, CorelDRAW®, and CAD/AEC/GIS engineering solutions. Windows and Mac.
Please call for pricing on full versions
or upgrade packages!
FlexiSIGN™
The mid-level Sign Making package provides exceptional tools to
produce high-quality signage without a large initial investment.
On Special! In Stock!
LIST
1,695
$
Only
1,195
$
Please call for pricing on full versions or upgrade packages!
SOFTWARE
Sign Cutting & Printing
LIST
New! SignLab for VersaWorks™ Edition
Specifically designed for sign makers using Roland VersaWorks™,
you can send print, print and cut jobs to your Roland™ printers
and Print and Cut devices. SignLab for VersaWorks™ is essentially
an unmatched design and production front-end that sends jobs
seamlessly to the VersaWorks™ RIP
SignLab Designer
LIST
LIST
LIST
Production environment, medium to high volume
Includes support for four printers
Drives flatbed and grand-format print devices
Prints with aqueous, solvent, or UV inks
Offers the ability to proof color across multiple devices
ONYX Profile Generator included
1,000
1,000
$
A vinyl cutting product, “SignLab Entry”, is a professional entrylevel sign making software package designed for the new shop.
Fully upgradeable to our more integrated packages as your needs
grow.
SignLab Vinyl™
4,995
$
$
A complete stand-alone, sign making-specific design station.
Great for existing SignLab users if you want to add a design-only
workstation to your shop or for sign makers using other sign
making software or design software. Designer gives you the
drawing and bitmap/vector editing tools you need to create highvalue, quality signage.
SignLab Entry™
•
•
•
•
•
•
83
1,600
$
For the small to mid size professional design shop that produces
vinyl-cut signage.
LIST
3,295
$
•
•
•
•
Production environment, low to medium volume
Includes support for two printers
Prints with aqueous, solvent, or UV inks
Offers preflight and general color correction without opening
files in original application
• Contour cutting
LIST
•
•
•
•
$
1,695
Non-Production environment
Better color than from standard Windows® drivers
Track ink and media usage
Rduce media costs by automatically nesting prints
A strongly featured design and production software for shops
that do vinyl-cutting only. Create expert and eye-catching vinyl
signs with SignLab Vinyl.
SignLab VinylPro™
LIST
2,400
$
For the small to large volume professional design shop where
production and flexibility are key.
The ultimate sign design and production software for vinyl cutting, SignLab Vinyl Pro™ gives you the text tools, special effects
and power tools you need to produce stunning vinyl signage.
Need to create a font? No problem. Add a chisel effect? Easy.
You'll find everything you need in this package to produce professional vinyl-cut signage.
SignLab Print & Cut™
LIST
3,700
$
For the high-volume design shop that produces vinyl and digitally
printed signage
Go digital with SignLab Print & Cut. With our built-in RIP technology we support a wide range of digital output devices. Also making vinyl signs No problem! With this package we support all vinyl
cutters and you'll get all the great tools and features that you've
grown to love.
ONYX GamaPrint software RIP is specifically designed to make
large-format printing easy, while still maximizing printer performance. GamaPrint is built upon the awardwinning ONYX® color
technology and robust productionlevel RIP engine. In addition to
PDF and PostScript®, GamaPrint supports TIFF, JPEG and JPEG
2000 files and is reliable with PostScript® and PDF language.
GamaPrint SE
LIST
1,095
$
The lower-cost version of the product, which supports printing to
one printer. The list of drivers includes most large-format indoor
inkjet printers as well as several entry-level solvent printers.
GamaPrint Pro
LIST
3,295
$
A higher-end version, which includes the RIP-Queue application
and can print to two printers simultaneously. The list of drivers
includes both indoor and outdoor large-format inkjet printers.
It also includes Media Manager for recalibration and media
management.
Please call for pricing on full versions or upgrade packages! Special pricing for competitive upgrade
84
SOFTWARE
Color Management
Monitor Calibrator
Color Management
i1Display LT
i1Base
i1XTreme
Designed for calibrating
and profiling all types of
monitors – LCD and CRT.
i1 Display LT calibrates
your monitor and adjusts
the color on screen, so your images remain
true with just a few simple clicks.
Entry-level color
management solution.
Professional Color Management
& Calibration System
Includes i1Pro spectrophotometer and
i1Match software for monitor
profiling with ability
to capture flash
and ambient light.
Designed for the unique
needs of professionals who
depend on accurate color
throughout their workflow.
i1XTreme is the one system
comprehensive enough
to be the only color
management solution you will ever
need.
Package includes:
• i1Display measurement device
(emission only Colorimeter)
• i1Match v3.x software for monitors
• Ambient light head
• i1Share software for creating, evaluating
and communicating color
• Interactive Training Modules
• Digital Pantone library
CDXEODLT..........................................$176.00
i1Display 2
Designed for calibrating and profiling all
types of monitors – LCD and CRT.
Package includes:
• i1Display measurement
device (emission only colorimeter) with ambient
measurement head
• i1Match v3.x software for monitors
• i1Share software for creating, evaluating
• Digital Pantone library
• Upgrade voucher ($200 valid towards any
one i1Pro solution)
EODIS2 ...............................................$259.00
EZcolor Software with
i1Display 2 Bundle
The perfect entry-level color
management solution for photographers and the creative
community. This simple to use
solution allows you to optimize and create color profiles for your
scanner, monitor, and printer providing display to print matching of almost any image.
XRCE-EZ-i1D2......................................$518.00
Package includes:
•
•
•
•
•
•
•
•
•
i1Pro spectrophotometer
Ambient light measurement head
Monitor holder
Positioning target
Scanning ruler
Backup board
i1 Reflective Scan Target
i1Match v3.x software for monitors
i1Share software for creating, evaluating
• Digital Pantone Library
• Soft carrying case
• Upgrade voucher (50% discount on any
one i1Match Module)
EOBA..................................................$995.00
Software Access Codes
i1 Monitor Module
CDXEOMM ...........................................$99.00
i1Display LT Monitor Upgrade
CDXEODLTUP .......................................$99.00
i1 Input Module – Scanner only
CDXEOIM .............................................$99.00
i1 CMYK Output Module
CDXEOCMYKOM ................................$399.00
i1 RGB Output Module
CDXEORGBOM...................................$199.00
i1 Beamer Upgrade
CDXEOBUPG ......................................$199.00
In addition to the standard i1Base, this
package includes the following software
modules:
• RGB & CMYK Output
• Scanners
• Digital Cameras
• Digital Projectors
• Profile Editor
EOXTR ..............................................$1495.00
i1iSis
Automatic Chart
Reader
For production
environments like High
End Proofing, Remote Proofing, Digital
Printing, Photo Processing and Fine Art
Printing, where speed, accuracy and ease-ofuse are essential. i1 iSis offers unique switchable UV Illumination to capture No-filter and
UVCut filter data in a single measurement
process. Users simply feed the chart into the
device and our unique visual chart recognition system automatically detects and aligns
accordingly. With the XL size version there is
no need to cut large test charts or print on
multiple pages.
EOIS i1iSis
i1 Digital Camera
Standard size for chart with maximal paper
width: 9 inches (A4+, Letter)
CDXEODC...........................................$199.00
EOIS..................................................$3,895.00
i1 Editor
CDXEOE................................................$99.00
EOISXL i1iSis XL
Digital Pantone Libraries
for i1 Share Software
XL size for chart with maximal paper width:
13 inches (A3+, Tabloid)
CDXNA .................................................$53.00
EOISXL..............................................$4,875.00
SOFTWARE
Clip Art
Vehicle Templates
Vector Graphics
Mega Collection
Created by signmakers organized
on a CD-Rom disk
(.ai and .eps file
formats), and an 8.5
x 11, catalog, printed
on heavy card stock with durable laminated
covers. Every Vector Art image is composed
of a perfect, closed vector path. There are
no open paths, crossed or intersecting lines
in any Vector Art image.
Each volume contains 5000+ images.
Car'n Truck/Pro Vehicle
Outlines 2008 Basic
Car'n Truck/Pro Vehicle
Outlines 2008 3D
Perfect for vehicle lettering and
wraps!
The biggest vehicle template
library ever! Now over 44,000
templates are available to
vehicle graphics experts worldwide!
In addition to the above it comes with software converts conventional
designs into highend 3D
presentation videos and
renderings.. Show your
client how the finished
wrap would look.
CDCADDCTPVO..................................$274.95
CDCADDCTPVO3D..............................$549.95
Vector Vehicle Graphics
Mega Collection
Hot Flames
Race Pack
CDCAVAMC........................................$149.00
Hot Flames Vol. 1
Mega 2 Collection
Mega 3 Collection
300 Classic and brand new
hot flame designs for cars,
trucks, hod rodder, racecars, jet skis, helmets etc.
400 brand new images of
the real racing stuff,
including checkered
flags, race numbers and
much more.
CDCAVAMC3......................................$149.00
CDCADDHF1.........................................$49.00
CDCADDRP...........................................$49.00
Hot Flames Vol. 2
Street Race
Graphics
CDCAVAMC2......................................$149.00
225 brand-new vehicle graphics for cars,
trucks, boats, jet skis etc.
CDCADDHF2.........................................$49.00
International
Safety Signs
Hundreds of safety signs,
digitized from international standard.
CDCADDISS ..........................................$49.00
Sign & Design
Concepts
30 full-colored and predesigned layouts for the creation and production of customized signs and letterings.
CDCADDSDC ........................................$49.00
Flaming
Animals
100 unique animal flames.
A new collection of Vehicle
Graphics with 100 highclass vector images; all vinyl-ready.
CDCADDFA ...........................................$49.00
Motorsports
CDCADDSRG1 ......................................$49.00
Street Race Graphics Vol. 2
CDCADDSRG2 ......................................$49.00
Tribals
The new Motorsports
Collection contains 50
high-class vector motorsport designs.
Tribals Vol. 1
151 vehicle graphics
Sign & Design
Graphics
CDCADDMS..........................................$49.00
Useful design-elements
like frames, banners, sign templates and
much more.
More than 1000 design elements for cars, trucks, boats,
jet skis etc.
CDCADDSDG ........................................$49.00
CDCADDPE ...........................................$49.00
Power Edition
Street Race
Graphics Vol. 1
CDCADDT1 ...........................................$49.00
Tribals Vol. 2
179 brand-new vehicle graphics.
CDCADDT2 ...........................................$49.00
Tribals Vol. 3
179 brand-new vehicle graphics.
CDCADDT3 ...........................................$49.00
85
86
SOFTWARE
Clip Art
Vector Vehicle Graphics
Photoshop Training
Vehicle graphics just don't get any better than this!
600 fully vectorized vehicle graphics ready to cut on your equipment.
The Platinum Edition
comes complete with a
full size (8.5 X11) fullcolor, bound book showing every graphic on a real car. 600 beautifully designed professional grade graphics
are expertly vectorized and ready for
smooth, quick cutting. Included are .eps and
.ai formats.
CDCAAGPE.........................................$359.95
The Millennium
Edition Gold contains
600 unique vectors that
can be used as cut path for a partial wrap
or simply as a clipping mask. Though brother to the Platinum Edition you will not find
duplicates from one to the next. Millennium
Edition also comes with a full color sales reference book.
CDCAAGMEG.....................................$274.95
Print and Cut Graphics
Pro Designer is the first ever Photoshop
training for vinyl. Having many uses for
many industries,
Photoshop is a vast
program. Aurora
has cut down to
the nitty-gritty and
shows just the
tools most widely
used in this industry. In an easy to
understand way,
you will learn a
whole list of topics:
3-D bevel and
emboss, changing colors, shadowing, filling
text, even how to design a full wrap using a
template in Photoshop.
• 1 hour 45 minutes
• Windows Media File
• Photoshop Fills Droplet
...........................................................$139.95
Combining colorful polished surfaces with
chrome effects in .pdf format. Its as easy as
open, scale, print/cut. With 30 different
shapes and 9 unique print effects there are
a total of 270 files ready to print and cut!
Also included on this DVD are transparent
.tiff format graphics to be used as a design
element in a full body wrap. The .tiff versions also come with an optional drop shadow or a simple beveled transparency of the
graphics.
CDCAAGDC ........................................$269.95
FX Flames
525 high resolution vehicle
graphics, ready for print
and cut.
CDCADDPWFX ...................................$179.95
3D Metal Machine is a
print and cut ready title.
These files come in .tiff and .jpg file format
with .eps cut contours. Using this title is as
easy as scale, print and cut. Included in the
package is a full color catalog showing each
graphic and its file name.
CDCAAG3DMM..................................$179.95
Print Craft Sign Blanks
make it very quick and
easy to build signs.
Simply add any logos and text that you
would like and you are ready to output a
professional looking sign. Comes with an
.eps cut contour that can be used as a cut
path or a clipping mask allowing you to
incorporate the sign into a larger design.
CDCAAGSB.........................................$269.95
SOFTWARE
Clip Art
87
Print Fills
Print Craft Pro Fills
were designed with vehicle graphics and
truck door lettering in mind. While these
fills are not tileable they include many
things that you can't get in a tileable package. Animal hides, sky scenes, lightning, you
name it! The Print Craft Pro Fills come in .jpg
file format with the available hardware in
transparent .tiff format. 329 images total.
• 16" x 50" @ 72 dpi!
CDCAAGPC1 ......................................$449.95
Tileable Fills!
Monster Wrap Fills are perfect
for any scale of printing. These
hi resolution images are 16" x 16" @ 300
dpi. When printing at 72 dpi these monsters
are a whopping 64" x 64"! While already
huge they will also tile seamlessly to any
scale while still maintaining an excellent
print quality. Simply copy and paste them
next to each other until you reach your
desired scale.
• 16" x 16" @ 300 dpi and seamlessly
tileable!
• 257 images total.
CDCAAGMW ......................................$364.95
Print Craft Pro Fills 2 are the second volume
in the Print Craft series. Suited best for vehicle graphics, signs and banners. This title
covers a wide spectrum of imaging including
beautiful wood fills, flags, camo and much
more. 423 images total.
• 18" x 50" @ 72 dpi!
CDCAAGPC2 ......................................$539.95
Suite
Includes three volumes - Print Craft Pro,
Print Craft Pro 2 and Print Craft Sign Blanks,
all on one DVD.
Tileable Fills!
Tile Master Fills are the second
addition to our seamlessly tileable
fills. Use them to fill text or tile them out to
be as large as you need.
• 30" x 30" @ 100 dpi and seamlessly
tileable!
• 150 images total
CDCAAGTMF......................................$259.95
Tiles & Textures
This collection comes
with hundreds of high
resolution and seamless
tiles for your individual
designs.
CDCADDPWTT....................................$179.95
CDCAAGPCS.......................................$649.95
Wrap Design Elements
Print'n Wrap — Ghost
Flames
Add any of the transparent .tiff flame
images to your work and watch it sizzle!
Digital Firestorm flames are
the most realistic
flames on the market. Choose from
side flames, rocker
panel flames, hood
flames & more. Providing them in transparent .tiff format allows you to float them
over the top of any background and get a
real look.
• Very large scale
CDCAAGDFS ......................................$269.95
Backgrounds and design
elements for wrapping vehicles.
Including transparent .tiff design elements
like barbed wire and lightning that you can
simply float over your design. While this title
requires Photoshop it also provides you with
the capability to come up with thousands of
different designs. With a creation scale of
8.1" x 21" @ 720 DPI These make great
design elements for any scale of printing.
• 81" x 210" @ 72 dpi
CDCAAGWW .....................................$539.95
25 different flame designs.
Available in 5 popular colors. These flames have
transparent fading colors
which will fit perfectly on any vehicle body
color.
CDCADDPWGF .....................................$79.00
Wild Fire
An extensive new collection of print ready realistic
flames. Ideal for designing flames on the
sides, hoods and roofs of any vehicle.
CDCADDPWWF ..................................$179.95
88
SOFTWARE
Clip Art
Wrap Design
Full Wrap Graphics
This is a professional collection of high resolution, large format backgrounds for your vehicle
wraps.
CDCADDPWFWG................................$184.95
Wrapture Full Body Wraps Volume 1 includes
the largest digitally created scene files available. With a creation scale of 88" X 236"
there are few jobs too big for the Wrapture
Series. Provided in .jpg file format. Having
created all of the designs at full scale using
3-D technology you will find no .jpg artifact
or other defects in this beautiful piece of
work.
Wrapture Full body Wraps Volume 3 is the
wildest of the bunch. With inlays of several
different types these files are ready to go or
easily changed. You make the sign and let
Wrapture get their attention.
• 72 images total,
• 88" x 236" @ 72 dpi
CDCAAGWFBW3 ................................$269.95
• 88" x 236" @ 72 dpi
CDCAAGWFBW1 ................................$269.95
Wrapture Full Body Wraps Volume 2 is 3-D
to the extreme! Including huge abstract
back grounds that can be incorporated into
any design or advertisement. They can be
used as is or modified to be a half wrap or
simply used as a fill.
• 88" x 236" @ 72 dpi
CDCAAGWFBW2 ................................$269.95
Wrapture Half Body Wraps Volume 1 is a
revolutionary way to get the same effects of
a full wrap while using lots less vinyl and
avoiding the really difficult spots. You know
what that means, more jobs done in less
time and cheaper for everyone! This title is
also perfect for shops just getting in to
wraps. These files are all supplied in .tiff format each with a separate cut contour in .eps
file format.
• 70 images total
• 200" long @ 72 dpi
• .tiff and .eps formats
CDCAAGWHBW1 ...............................$269.95
BANNER DISPLAY
Banner Stands
BANNER
Ultra Retractable DISPLAYS
Single Side
Banner Stand
ULTRA
Retractable
This is the flagship model of retractable banner stands. With the
click of a button, you
can change the graphic without any tools.
The wide base design
and adjustable feet
allow the display to
stand firmly and
straight on uneven
floors. Chrome-plated
end caps make your
display stand out from
the others. Carrying
bag included.
Retractable
Banner Stand
BANNER
DISPLAYS
Retractable
Your ultimate choice for a light weight, compact and convenient banner stand at an
affordable price. Carrying bag included.
Available in the
following sizes:
•
•
•
•
24” x 63”
33” x 79”
39” x 79”
47” x 79”
TriLeg
High quality and elegant
design banner stand.
The main frame with 3
integrated feet forms a
stable and convenient
display, with no parts to
loose. Telescopic pole
allows easy height
adjustment up to 85”
high. Carrying bag
included.
Available in the
following widths:
•
•
•
•
Available in the
following sizes:
•
•
•
•
TriLeg
Banner Stand
BANNER
DISPLAYS
24”
28”
31”
39”
33” x 85”
39” x 85”
47” x 85”
59” x 85”
EZDisplay
Banner Stand
Banner Stand
Accessories
Dual Retractable BANNER
DISPLAYS
Double Side
Banner Stand
Same features as above but has a double
cassette for displaying 2 banners. Deluxe
carrying case included.
Available in the
following sizes:
EzDisplay
Available in the
following sizes:
DUAL
Retractable
Light-weighted and budget
priced makes EZDisplay the
perfect choice when it
comes to volume order.
User-friendly and easy to
mount.
BANNER
DISPLAYS
Snap Profile
Banner Light
•
•
•
•
24” x 71”
33” x 85”
39” x 85”
47” x 85”
Banner Poles
• 33” x 85”
• 39” x 85”
Please call for
special pricing
on all banner stands
listed on this page.
BACK VIEW
89
ENGRAVERS
90
Engravers
EGX-30
EGX-350
Desktop Engraver
Desktop Engraver
The EGX-30 provides the most cost-effective, computerized engraving solution
available. Engineered for busy professionals looking for a second
machine and beginners working on
a limited budget, the EGX-30
engraves badges, nameplates, key
rings, and luggage tags. It also scribes brass for
awards and trophies.
The EGX-350 has what it takes to give your customers what they
really want! Powered by a 20000 rpm DC brushless motor, the
desktop engraver produces a wide
range of popular jobs with crisp
text and clear graphics. Indoor
signs, gifts and awards, and custom rhinestone apparel all turn
out perfectly.
•
•
•
•
•
Convenient, 12-by-8-inch work area
Surface detection at the push of a button
Quiet operation
Engraving software included
Rail tracking for smooth engraving
•
•
•
•
•
•
Call for
Price!
LIST
2,995
$
Safe & easy to operate
Engraving software & tools included
Optional Jigs & vices available
Convenient, 12-by-9-inch work area
Advanced surface detector
Hand-held control panel with a large
backlit LCD screen
Call for
Price!
LIST
5,495
$
EGX-400 & EGX-600
Roland EGX Pro engravers have the power, size and speed professional
engravers need. In addition to personalized awards, corporate crests and
promotional items, these benchtop devices are part of a complete solution
for producing quality indoor and ADA compliant signage. Your signs will
have an upscale look while meeting all ADA regulations.
Maximum work area for the EGX-600 is 24” x 16” and 16” x 12” for the
EGX-400. Both have a Z axis height of 1.57”.
•
•
•
•
•
•
Digital AC Servo brushless motors on all axes for unmatched precision
30,000 rpm spindle for higher torque and less vibration
Call for
2D and 3D Engraving
Price!
2 MB data re-plot buffer
EGX-400
Sequence I/O control for networking
$
Engraving software included
LIST
9,995
EGX-600
LIST
11,995
$
Notes:
My S&F Customer Code: _______________
My S&F Salesperson: __________________ ext. ________
__________________ ext. ________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
___________________________________
Please copy and use this form when placing orders via fax
BROOKLYN
110 Emerson Place, Brooklyn, NY 11205
SPECIAL V • I • P
718.399.3333
FARMINGDALE
43 Engineers Lane, Farmingdale, NY 11735
631.420.4400
www.sfsupplies.com
ORDER FORM
Date ______ /_____ /______
PO #
Company Name __________________________________________________ Name _____________________________________
Address ___________________________________________ City____________________ State __________ Zip _______________
Phone (
QUAN.
) ______________________________________
ITEM #
Fax (
DESCRIPTION
) _______________________________________
PRICE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
FAX FREE TO 1-888-399-3375
1% UNCONDITIONAL DISCOUNT OFF ENTIRE ORDER
www.sfsupplies.com
110 Emerson Place
Brooklyn, NY 11205
PRSTD STD
U.S. POSTAGE
PAID
PERMIT NO. 289
BROOKLYN N.Y.

Avery Vinyl

Transcription

Similar documents

7357268 Nufloors Dec 31.indd

automotive upholstery handbook - California Bill`s Automotive

Shaffer`s Goldrush - ADM Animal Nutrition

Westeck Windows and Doors

USCutter - Manual for TITAN and TITAN2 Vinyl Cutter

C O R O N A D O

Veka Deck Warranty - Customized Vinyl Sales

Why choose Bufftech® over other vinyl products?

Choose Your Financing! FREE FREE

PDF - Armstrong World Industries