2007 - Hanser Tagungen und Messen

R E G I S T R AT I O N
I N V I TAT I O N
9. M A C H I N I N G W O R K S H O P
2007
9. M A C H I N I N G W O R K S H O P
17-18 October 2007, Darmstadt
2007
Contact
Organization and Exhibition
Carl Hanser Verlag
Doreen Müller
Kolbergerstraße 22
81679 München
Phone:
+49 (0) 89 / 998 30-427
Fax:
+49 (0) 89 / 998 30-157
E-Mail:
[email protected]
Program
Institute of Production Management,
Technology and Machine Tools (PTW)
Technische Universität Darmstadt
Julien Hohenstein
Petersenstrasse 30
64287 Darmstadt
Phone:
+49 (0) 6151 / 16-34 56
Fax:
+49 (0) 6151 / 16-33 56
E-Mail:
[email protected]
New Location
MARITIM Rhein-Main Hotel Darmstadt
Am Kavalleriesand 6
64295 Darmstadt
Phone:
+49 (0) 6151 / 303-0
www.maritim.de
Attendance Fee
€ 890,–; Subscribers of WB Werk-
statt + Betrieb and project partners
of PTW: € 820,– (plus German VAT)
Registration and cancellation
Please register in written form. The
registration is not binding until you
have received a written confirmation
and paid the attendence fee. A cancellation is possible for a service
charge of € 75,– plus German VAT
until three weeks before the workshop. For a request received after
that date, the fee is non-refundable.
We kindly ask you to cancel your registration in writing, either by mail,
email, or fax.
Accomodation
A limited number of rooms with a
special rate are reserved for participants. Please book the rooms using
the keyword Machining workshop in
following hotel.
MARITIM Rhein-Main
Hotel Darmstadt
Am Kavalleriesand 6
64295 Darmstadt
Phone:
+49 (0) 6151 / 303-0
www.maritim.de
(Single room € 121,– incl. breakfast)
17-18 October 2007, Darmstadt
Organized by
New manufacturing strategies
for powertrain and transmission components
Exhibitors
Newest developments in powertrain tooling • Challenges due to new materials • Innovative
and flexible machine tool concepts • Virtual planning and simulation of machining processes
• Advanced manufacturing technologies for cubical and rotational parts
+++ Presenting companies from Japan, Italy, Israel, France, The Netherlands
and USA
Payment
Please make sure that the attendance
fee is paid 14 days prior to the conference.
Otherwise we would have to ask you,
to pay via creditcard or show the
transfer voucher.
+++ Visit Rolls-Royce Deutschland Ltd. & Co. KG, DaimlerChrysler AG, Pirelli
Deutschland GmbH, ixetic GmbH
Program Committee
FAX-Hotline +49 (0)89 / 998 30 157
■ I agree to the conditions of attendance and hereby register for the 9. Machining Workshop in Darmstadt on 17-18 October. Attendance Fee: € 890,–; Subscribers of WB Werkstatt + Betrieb and project partners of PTW: € 820,– (plus German VAT)
I would like to visit ■ Rolls-Royce
■ DaimlerChrysler
■ ixetic
■ Pirelli
Participant:
■ Company address
First Name
■ Private address
Name
Invoice address (if different):
■ Company address
First Name
■ Private adress
Name
Reg
i
now ster
!
Prof. Dr.-Ing. Eberhard
Abele, Head of Program
Committee
» PTW Technische
Universität Darmstadt
Manfred Maier,
Head of Sales and Technics
» Gebr. Heller
Maschinenfabrik GmbH
Dr. Wolfgang Jütting,
Head of Machine Tool
Technology
» DaimlerChrysler AG
Dr. Andreas Mootz,
Managing Director
» EMAG Salach
Maschinenfabrik GmbH
Dr. Dieter Kress,
Managing Director
» MAPAL Dr. Kress KG
Dr. Peter Müller,
Head of R &D
» TITEX + Prototyp
Deutschland
Jacek Kruszynski,
Head of Technology and
Development
» KOMET Group
Holding GmbH
Dr. Ulrich Reuter,
Head of Production
Planning
» Audi AG
Company
Company
Industry Sector
Street / PO Box
Department
Function
State / ZIP Code / City
Street/ PO Box
■ I am subscriber of the magazines WB Werkstatt+Betrieb or project partners of PTW.
State / ZIP Code / City
Telephone
Fax
Date / Signature
E-Mail
www.machining-workshop.de
Carl Hanser Verlag · P.O. Box 86 04 20 · 81631 München · Phone +49 (0)89/998 30-427 · Fax +49 (0)89/998 30-157 · E-Mail: [email protected]
©
Picture Credits: www.starragheckert.com
9 . M AC H I N I N G WO R K S H O P 2 0 07
P RO G R A M
Wednesday, 17 October 2007
Goal of the conference
The presentation from industry and science will show inno-
8:30 a.m.
vative machining solutions and successful tool concepts for
9:15 a.m.
Chairman: Prof. Dr.-Ing. Herbert Schulz » PTW, Technische
Universität Darmstadt
Registration and welcome coffee
Opening remarks
3:35 p.m.
Prof. Hans-Jürgen Prömel » President of Technische Universität Darmstadt
engine and transmission components such as cylinder head
and block, crankshaft or gear box. The conference will
give an overview of trends and manufacturing strategies for
Innovation: crankshaft and rotational parts
9:25 a.m.
Innovations in powertrain machining
4:00 p.m.
Prof. Dr.-Ing. Eberhard Abele, Julien Hohenstein
» PTW, Technische Universität Darmstadt
machining applications.
Who should attend
The conference addresses managers, scientists and experts
Innovation for manufacturing technology in the
automotive industry
from OEMs, tool and machine tool manufacturers and autoworkshop are production planning, quality assurance, pur-
9:45 a.m.
chasing, product development as well as R&D.
Future concepts and applications
for powertrain
Crankshaft machining – Process comparison:
Internal milling – External milling –
Turn chasing
Wolfgang Märker » Gebr. Heller Maschinenfabrik GmbH,
Nürtingen
4:25 p.m.
Chairman: Prof. Dr.-Ing. Eberhard Abele, » PTW, Technische
Universität Darmstadt
motive suppliers. Departments in the focus of the machining
Milling of ADI crankshafts
Dr. Stefan Scherbarth » Sandvik GmbH, Bietigheim
Innovative production systems for
crankshafts
Dr.-Ing. Jens Muckli » Naxos Union GmbH, Frankfurt
4:50 p.m.
Conclusions and transfer to PTW
5:20 p.m.
Machining Demonstration
Dr. Wolfgang Horn » MAG IAS, Göppingen
10:10 a.m. Reduction of total cost per part using optimum tools in production of powertrain and
transmission components
Dr. Dieter Kress » Mapal Dr. Kress KG, Aalen
6:00 p.m.
Get Together
Institute of Production Management, Technology and
Machine Tools (PTW) » Technische Universität Darmstadt
8:30 p.m.
Transfer back to hotel
10:35 a.m. Coffee break
11:00 a.m. Increasing productivity by quality standards
for CNC-programs
Dr.-Ing. Thomas Hornig » DaimlerChrysler AG, Stuttgart
9. M A C H I N I N G W O R K S H O P
11.25 a.m. Virtual planning and simulation in powertrain machining
2007
Dr. Tom van´t Erve » Siemens PLM Software,
Enschede, The Netherlands
12:00 p.m. Lunch
17-18 October 2007, Darmstadt
Thursday, 18 October 2007
Innovation in transmission parts
Chairman: Manfred Maier » Gebr. Heller Maschinenfabrik
GmbH, Nürtingen
8:30 a.m.
Laser-welded differential gears
Nico Spitzenberg » Volkswagen AG, Kassel
8:55 a.m.
Innovation: cubical parts, cylinder block and head
Hard gear finishing by generating grinding –
Potentials and limitations
Dr. Wolfgang Geis-Drescher » GM Powertrain Germany
GmbH, Rüsselsheim
Chairman: Dr. Dieter Kress » MAPAL Dr. Kress KG, Aalen
1:00 p.m.
» Supporting Program
1:25 p.m.
have the opportunity to meet speakers and other participants during our
Get together, the company visits and the accompanying exhibition
(Nagel, Heller, Walter-Titex Prototyp, Sandvik, Zoller).
Get together at PTW: Machining demonstration – Research in action –
Innovative production metrology –
Process compensation with the example
of temperature control on the work piece
parallel to the primary processing time
Lothar Halder
» Blum-Novotest GmbH, Ravensburg
dinner buffet – performance
Aspects of high productivity machining in
the automotive powertrain production
Visiting production sites:
Frank Koppka » Renault, Paris, France
Kimio Nishimura » Nissan, Yokohama, Japan
* Rolls-Royce Deutschland Ltd & Co. KG - Production of aero engines
1:50 p.m.
2:15 p.m.
* DaimlerChrysler AG – Visit of foundry and machining
* ixetic GmbH – Production of steering, chassis, transmission, brakes
Cylinder Finishing in CGI – Helical Milling
David C. Woodruff, CMfgE » Makino, Mason, Ohio, USA
2:40 p.m.
and air conditioning
* Pirelli Deutschland GmbH – Production of high-performance-tires
Honing of aluminium crankcases
Dr. Michael Lucke » Porsche AG, Stuttgart
3:05 p.m.
Coffee break
(The number of participants is restricted)
www.machining-workshop.de
9.20 a.m.
www.machining-workshop.de
Innovation through materials, strategies and
instruments: The Fiat experience
Mauro Comoglio, Anja Herrmann Praturlon, Andrea Gallino
» Research Center FIAT, Orbassano, Italy
Burkhard Schramm
» PTW, Technische Universität Darmstadt
Use this machining workshop as a platform to get in contact with key
players for powertrain machining processes and technology. You will
Machining of compacted cast iron using
PCD tools
9:45 a.m.
Coffee break
Successful tool and spindle concepts
Chairman: Dr. Ulrich Reuter » Audi AG, Ingolstadt
10:15 a.m. New materials in automotive industry as
motivation for cutting material development
Jörg Drobniewski » Walter AG, Tübingen
10:40 a.m. Motor spindles in modern productions
Wolfgang Heinisch » Egin-Heinisch, Naumburg
11:05 a.m. Powertrain tools and the possibilities of
modern sinter technology
Dr. Moshe Goldberg » Iscar Ltd., Tefen, Israel
11:30 a.m. Conclusions
11:45 a.m. Lunch
1:00 p.m.
Visiting production sites
3:45 p.m.
Transfer back to hotel
4:00 p.m.
End of 9. Machining Workshop 2007