Product catalogue, surface blasting systems

Transcription

Product catalogue, surface blasting systems
Rotorjets
Aquablast®surface
blasters
Vacuum
units
Spiderjet®3000
Abrasiveinjection
nozzle
www.hammelmann.com
Contents
(Navigation via Bookmarks)
Rotorjets for manual water blasting
Type RD 400 with accessories
Type RD Flex 3000 with accessories
Rotorjet with pneumatic motor
Rotorjets for mechanical deployment
Type RDM 200 with accessories
Type RDM 250 R with accessories
Type RDM 400 R with accessories
Type RDM 750
Type RDM 750 R
Rotorjets with electric motors
Aquablast surface blasters
Type FR 1000 with accessories
Type FR 1500 with accessories
Type FR 3000
Type FRV 2500 with accessories
Type FRV 3000 with accessories
Type FRE 3000
Type FRWV 3000
Vacuum units and accessories
Spiderjet 3000
Abrasive injection nozzle
Hammelmann application engineering overview
13.A.1 – 06/15
Rotorjets
Type RD 400
 For use with high pressure spray
guns SP 1000, SP 1000 ME and
high pressure lances. After
changing the lance it is also
useable for SP 400.
 Dust tight, encapsulated eddy
current brake.
 Cooling sleeve.
 Wear resistant rotary action with
labyrinth seal.
 Hollow shaft precisely supported
by bearings.
 Nozzle inserts recessed in nozzle
head.
 With protective cover.
Typical applications
 Cleaning facades, removing
old paint.
 Cleaning concrete, floor tiles
and paving.
 Cleaning heat exchanger
externals.
 External cleaning of construction
equipment and tracked vehicles.
 Cleaning mining machinery and
equipment.
Technische Daten
Operating pressure max.:
Flow rate max.:
Pressure loss at 25 l/min.:
Pump power:
Speed of rotation:
Diameter:
Connection A/F:
Connection thread:
No. of nozzles:
Length:
Weight:
400
80
5
22 - 70
500 - 2000
60
24
G ⅜“
2
168
approx. 1,2
bar
l/min.
bar
kW
-1
min
mm
mm
mm
kg
For nozzle inserts see reverse.
Code no.
09.00530.2523
When working with hand held guns or lances the max. permissable reaction force is
250 N.
If the reaction force is over 150 N then the jetting tool must be fitted with a support device
such as a shoulder stock.
Hammelmann
Maschinenfabrik GmbH
Postfach 3309 • D-59282 Oelde Telefon (0 25 22) 76-0
Zum Sundern 13-21 • Germany Telefax (0 25 22) 76-444
eMail: [email protected] • Internet: www.hammelmann.de
© Copyright Hammelmann GmbH, Oelde, Germany. Rights reserved to modify design.
13.A.2 – 06/15
Rotorjets
accessories for Type RD
400
W
Nozzle
angle
L
Nozzle
offset
(mm)
27°
A
Stand off
distance
(mm)
B
Working
width
(mm)
15
55
8
45
85
95
140
Code no./
single item
Item
no.
Qty
10
1
Protect. cover 01.01894.0021
20
3
Set screw
02.00894.0107
30
2
O-ring
04.00730.0033
40
2
Support ring
04.00738.0405
Description
Nozzle inserts: Design “A“,
Round jet efficiency factor 0,95
Item
no.
Code no. 04.05318.0xxx
xxx = see table for last 3 digits of code no.
Ø (mm)
xxx
Ø (mm)
xxx
Ø (mm)
xxx
1,0
075
1,3
078
1,6
080
1,1
076
1,4
079
1,2
077
1,5
025
50
Example:
Nozzle insert design “A“, Ø 1,0 mm
= Code no. 04.05318.0075
Nozzle insert selection and optimum performance range
Example
Parameters:
Operating pressure:
Flow rate:
Select:
Correct nozzle Ø:
Rotorjet with W = 27
Ø
p
Q
=
=
=
F
=
380 bar
40 l/min
2 x 1,3 mm
Nozzle insert dia.
Operating pressure
Flow rate
(without leakage)
Reaction force
Do not exceed right side limit
of performance range:
Danger of overpowering!
For safety rules governing
reaction force, see previous
page!
Hammelmann
13.A.3 – 06/15
Rotorjets
Type RD 1000
guns SP 1000, SP 1000 ME and
high pressure lances. After
changing the lance it is also
useable for SP 400.
Version 1 + 2
Version 3
current brake.
 Cooling sleeve.
labyrinth seal.
by bearings.
head.
 With protective cover.
Technical data
 Cleaning facades, removing
old paint.
 Cleaning concrete, floor tiles
and paving.
 Paint spray booth cleaning, (oil,
paint overspray etc.) booth floor
grids, conveyor chains.
externals.
 Removing old expansion joints.
Version 1
Version 2
Version 3
1000 bar
Flow rate max.:
60 l/min.
28 l/min.
10 bar
Pump power:
37 - 70 kW
22 - 55 kW
15 - 30 kW
-1
Speed of rotation:
1000 - 2000 min
Weight approx.:
1.6 kg
1.6 kg
1.7 kg
Length:
166 mm
Diameter:
60 mm
Connection A/F:
24 mm
Connection thread:
G ⅜“
Nozzle inserts:
2 x type “A“
2 x type “P“
RD 1000
When working with hand
held guns or lances the
max. permissible reaction
force is 250 N.
If the reaction force is over
150 N then the jetting tool
must be fitted with a
support device such as a
shoulder stock.
Hammelmann
Code no.
Version 1*
09.00530.2532
Version 2*
09.00530.2542
Version 3*
00.00786.0170
*To select see reverse.
13.A.4 – 06/15
RD 1000
Version 1
W
Nozzle
angle
L
Nozzle
offset
(mm)
20°
A
Stand off
distance
(mm)
B
Working
width
(mm)
15
55
45
70
95
100
8
15
Version 2
27°
8
55
Item no.
Rotorjet
accessories for Type RD 1000 Version 1 + 2
50
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
0,7
072
1,1
076
1,5
025
0,8
073
1,2
077
1,6
080
074
1,3
078
075
1,4
079
45
85
0,9
95
140
1,0
Example:
Item
no.
Qty.
Description
Code no.
per single item
10
1
Protect. cover
01.01894.0021
20
3
Set screw
02.00894.0107
30
2
O-ring
04.00730.0033
2
Support ring
04.00738.0405
40
Nozzle insert design ”A“
Ø 0,7 = Code no. 04.05318.0072
Example
Parameters:
Operating pressure:
Flow rate:
Select:
Correct nozzle Ø:
Rotorjet with W = 20
Ø
p
Q
=
=
=
F
=
750 bar
34 l/min
2 x 1,0 mm
Nozzle insert dia.
Operating pressure
Flow rate
(without leakage)
Reaction force
page!
Hammelmann
13.A.5 – 06/15
Rotorjet
accessories for Type RD 1000 Version 3
Qty.
10
1
Protect. cover
01.01894.0050
20
3
Set screw
02.00894.0107
30
2
Nozzle type “P“
04.00790.xxxx
Description
Nozzle inserts: Design “P“, Round jet,
efficiency factor: 0,7
Item
no.
Ø (mm)
xxx
Ø (mm)
xxx
Ø (mm)
xxx
0,6
092
0,75
192
1,1
187
0,65
186
0,8
094
1,3
189
0,7
093
0,9
095
30
Example:
Nozzle insert design “P“,
Ø 0,7 mm = Code no. 04.00790.0093
Operating pressure
bar
mm
200
300
400
500
600
700
800
900
1000
10,2
10,8
11,3
12,0
12,7
13,9
0,6
2x Nozzle - Type P
0,65
0,7
11,4
12,3
13,1
15,1
0,75
11,9
13,1
14,1
0,8
13,6
14,9
16,1
17,2
18,8
0,9
15,4
1,1
1,3
19,9
22,7
Hammelmann
22,9
27,8
Flow - L/min
+ Leakage 0,3 - 1,0 L/min
Code no. /
single item
Item
no.
13.A.6 – 06/15
Rotorjets
Type RD 1600
guns, Type SP 2500 and high
pressure lances.
current brake.
 Cooling sleeve.
labyrinth seal.
by bearings.
head.
 With protective cover (against
blast back).
.
 Removing two component paints
 Grid cleaning.
 Removing road markings from
concrete.
 Removing strongly adhered old
coatings.
externals.
Code no.
Technical data
Operating pressure:
Flow rate:
Pump power:
Speed of rotation:
Weight:
Length:
Diameter:
Connection A/F:
Connection thread:
No. of nozzles:
max. 1600 bar
max. 30 l/min.
5 bar
55 - 90 kW
-1
800 - 2000 min
approx. 1.75 kg
166 mm
60 mm
24 mm
M 14 x 1.5 LH
2 x type “A“ or “B“
09.00530.2773
Accessories
Adapter for connection:
9/16 – 18 UNF LH
⅜“
Disassembling tool for wearing
sleeve (bronze)
RD 1600/2500
Code no.
01.05300.0741
01.05320.0256
00.06224.0077
When working with hand held guns or lances the max. permissible reaction force
is 250 N.
If the reaction force is over 150 N then the jetting tool must be fitted with a support
device such as a shoulder stock.
Hammelmann
13.A.7 – 06/15
W
Nozzle
angle
20°
L
Nozzle
offset
(mm)
A
Stand off
distance
(mm)
B
Working
width
(mm)
15
48
45
68
95
104
8
Item
Qty.
no.
Description
Code no.
per single item
10
1
Protect. cover
01.01894.0021
20
3
Set screw
02.00894.0107
30
2
O-ring
04.00730.0033
2
Support ring
04.00738.0405
40
Item
no.
Rotorjets
accessories for Type RD 1600
50
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
0,6
071
0,9
074
1,2
077
0,7
072
1,0
075
0,8
073
1,1
076
Example:
Nozzle insert design “A“
Ø 0,6 = Code no. 04.05318.0071
Nozzle inserts selection and optimum performance range
Example
Parameters:
Operating pressure:
Flow rate:
Select:
Correct nozzle Ø:
Ø
p
Q
=
=
=
F
=
1200 bar
28 l/min
2 x 0,8 mm
Nozzle insert dia.
Operating pressure
Flow rate
(without leakage)
Reaction force
page!
Hammelmann
13.A.8 – 06/15
Rotorjets
Type RD Flex 3000
with adjustable rotation speed
 Designed for use with the
®
SP 3000 and Ergoblast
guns, lances etc.
 Low wear, leakage free
rotating components.
 Internal protected brake.
 Quick change seal system.
 Nozzle inserts are
countersunk in the nozzle
carrier.
 Nozzle carrier protected by
blast back shield.
 Aluminium protective sleeve.
When working with hand held
guns or lances the maximum
permissible axial reaction force
is 250 N. If the reaction force
exceeds 150 N the blasting tool
must be fitted with a support
device such as a shoulder
stock.
 Renovation: surface layer (render
etc.) removal, paint removal, facade
cleaning.
 Cleaning and washing concrete
structures.
 Expansion joint removal.
 Side wall cleaning in phosphate plants
 Coating and paint removal from metal
surfaces.
 Blasting pipe externals.
 Paint booth grid and skid clean up.
 Hull, deck and superstructure surface
preparation, heavy machinery clean
up in the ship repair industry.
 Surface preparation on awkward
metal profiles.
Accessories
Code no.
Adapter for connection
9/16 – 18 UNF LH
⅜“
Technical data
01.05300.0727
01.05320.0256
[max. 1000bar]
Operating pressure:
Flow rate:
Pump power:
Speed of rotation:
Weight:
Length:
Diameter:
Connection A/F:
Connection thread:
Nozzle inserts:
max. 3000 bar
6.2 - 30 l/min.
30 bar
see at the table
1000 - 4000 min-1
1.8 kg
236 mm
74 mm
24 mm
M 14 x 1.5 LH
max. 6
Connection piece
M14 x 1,5 LH (i) M14 x 1,5 LH (a)
01.05320.0409
Snap ring
02.00386.0053
Tool for assembling the
sealing and carbide sleeve
of the hollow shaft
00.06224.0149
Tool for assembling the
snap ring (pos. 410)
00.06224.0174
Set of wearing parts
00.05944.0163
Set of spare parts
00.05617.0013
Pump power
Suitable
nozzle inserts
Connection
Code no.
RD Flex 3006
37 – 70 kW
Type
“P“ and “T“
M 14 x 1.5 LH
00.00786.0172
RD Flex 3001
55 – 70 kW
Type
“P“ and “T“
M 14 x 1.5 LH
00.00786.0079
RD Flex 3002
70 – 120 kW
Type
“P“ and “T“
RD Flex 3003
70 – 120 kW
Type
“P“ and “T“
RD Flex 3004
70 – 120 kW
Type “K“
Rotorjet type
RD Flex 3005
Hammelmann
M 14 x 1.5 LH
00.00786.0080
9/16 – 18 UNF LH
00.00786.0158
M 14 x 1.5 LH
00.00786.0093
9/16 – 18 UNF LH
00.00786.0159
M 14 x 1.5 LH
00.00786.0089
Type
M 14 x 1.5 LH
“P“ and “T“
70 – 120 kW
00.00786.0090
13.A.9 – 06/15
Rotorjets
nozzle diagram for Type RD Flex 3000
RD Flex 3001
RD Flex 3004
For 3 x nozzle Type ”P“
For 2 x nozzle Type “K“
Nozzle
Operating pressure in bar
dia. in
1800 2000 2200 2300 2400 2500 2800 3000
mm
0,35
8,5
9,0
9,3
0,40
9,9 10,4 10,6 10,8 11,1 11,7 12,1
0,45
11,9 12,5 13,1 13,4 13,7 14,0
0,50
14,7 14,5
Flow rate in l/min
0,55
17,7
Nozzle
dia. in
1800 2000 2200 2300 2400 2500 2800 3000
mm
0,50
12,3 13,1 15,3
0,55
14,0 14,3 14,6 14,9 15,8 18,9
0,60
15,9 16,7 17,1 17,4 17,8 18,8 19,5
Flow rate in l/min
0,70
20,5 21,6 22,7
For 3 x nozzle Type ”T“
Nozzle
dia. in
1800 2000 2200 2300 2400 2500 2800 3000
mm
0,30
8,2
8,7
9,0
0,35
10,0 10,4 10,7 10,9 11,1 11,8 12,2
0,40
12,3 13,0 13,6 13,9 14,2
0,45
15,6 16,5
Flow rate in l/min
0,50
15,1 15,9
Deviations from these nozzle combinations only
after consultation with the manufacturer!
RD Flex 3002
RD Flex 3005
For 3 x nozzle Type “P“
Nozzle
dia. in
1800
2000
2200 2300 2400 2500 2800 3000
mm
0,45
14,8 15,3
0,50
16,2 16,6 16,9 17,3 18,3 18,9
0,55
18,7 19,6 20,1 20,5 20,9
Flow rate in l/min
0,60
21,1 22,3 23,3
Nozzle
dia. in
1800
2000
2200 2300 2400 2500 2800 3000
mm
0,35
13,8 14,1 14,7 15,2
0,40
15,6 16,3 16,9 17,3 17,7 18,1 19,2 20,0
0,45
19,2 20,3 21,4 22,0
Flow rate in l/min
0,50
23,8 25,1
For 5 x nozzle Type For 3 x nozzle Type ”T“
Nozzle
dia. in
1800 2000 2200 2300 2400 2500 2800 3000
mm
0,40
19,5 20,2
0,50
16,7 17,1 17,4 17,8 18,8 19,5
0,55
19,2 20,2 20,6 21,1 21,5
Flow rate in l/min
0,60
21,7 22,9 24,0
Nozzle
dia. in
1800 2000 2200 2300 2400 2500 2800 3000
mm
0,30
13,4 14,2 14,7
0,35
16,2 17,0 17,4 17,8 18,2 19,3
0,40
20,0 21,1 22,2 22,7
Flow rate in l/min
0,45
25,3 26,7
RD Flex 3003
RD Flex 3006
Nozzle
dia. in
1800 2000 2200 2300 2400 2500 2800 3000
mm
0,30
13,2 13,6
0,35
15,2 15,9 16,2 16,6 16,9 17,9 18,6
0,40
18,8 19,8 20,8 21,2 21,7 22,1
Flow rate in l/min
0,45
23,8 25,0
Nozzle
dia. in
mm
0,25
0,30
0,35
0,40
0,45
1000 1200 1600 1800 2000 2200 2300 2400 2500 2800 3000
4,7
7,7
8,9
6,8
7,2
7,6
8,9
8,4
9,9
9,7 11,2
5,8
6,0
6,1
6,2
8,0
8,1
8,3
8,5
6,6
6,8
Flow rate in l/min
Nozzle
dia. in
1800
2000
2200 2300 2400 2500 2800 3000
mm
0,25
12,0 12,4
0,30
15,3 15,7 16,0 16,4 17,3 17,9
0,35
19,9 20,9 21,4 21,8 22,3
Flow rate in l/min
0,40
24,7
Hammelmann
Nozzle
Operating in bar
dia. in
1000 1200 1600 1800 2000 2200 2300 2400 2500 2800 3000
mm
6,2
0,25
7,7 7,8 8,0 8,2 8,7 9,0
0,30
8,9 9,4 10,0 10,4 10,7 10,9 11,1
0,35
10,1
11,6
12,3 13,0
0,40
11,6
12,7
14,7
Flow rate in l/min
0,45
Telefon (0 25 22) 76-0
Postfach 3309 • D-59282 Oelde
13.A.10 – 06/15
Rotorjets
Type RD Flex 3000 MONO
with adjustable rotation speed
 Designed for use with the
SP 3000 and Ergoblast® guns,
lances etc.
 Low wear, leakage free rotating
components.
 Internal protected brake.
 Quick change seal system.
 Nozzle inserts are countersunk in
the nozzle carrier.
 Nozzle carrier protected by blast
back shield.
 Aluminium protective sleeve.
 Renovation: surface layer (render
etc.) removal, paint removal,
facade cleaning
 Concrete renovation: surface
roughening, removal, exposing
reinforcing bars
 Surface cleaning.
Paint removal from metal
surface
 Removing resilient coatings.
 Descaling and cleaning of ships‘
hulls, turbine wheels, propellers
and ”spot blasting“.
Technical data
Accessories
Operating pressure:
max. 3000 bar
Flow rate:
max. 30 l/min.
30 bar
Pump power:
see at the table
-1
Speed of rotation:
1000 - 4000 min
Weight:
2.3 kg
Length:
205 mm
Diameter:
75 mm
Connection A/F:
24 mm
Connection thread:
M 14 x 1.5 LH
Nozzle inserts:
1 piece
Adapter for connection
9/16 – 18 UNF LH
⅜“
Code no.
01.05300.0727
01.05320.0256
[max. 1000bar]
When working with hand held guns or lances the maximum
permissible axial reaction force is 250 N. If the reaction force
exceeds 150 N the blasting tool must be fitted with a support device
such as a shoulder stock.
Connection piece
M14 x 1,5 LH (i) M14 x 1,5 LH (a)
01.05320.0409
Driving nozzle for
RD Flex 3000 MONO 1
04.00795.0064
Driving nozzle for
RD Flex 3000 MONO 2
04.00795.0102
Tool for driving nozzle
04.06224.0084
Protection cap
01.01894.0057
Wearing ring
01.05333.0002
Operating
pressure
Suitable
nozzle inserts
Connection thread
Code no.
RD Flex 3000 MONO 1
2200 - 3000 bar
Type
“P“ and “T“*
M 14 x 1,5 LH
00.00786.0239
RD Flex 3000 MONO 2
1500 - 2200 bar
Type
“P“ and “T“*
M 14 x 1,5 LH
00.00786.0241
Rotorjet type
* Nozzle selection according to the chart and data sheet (chapter 12.J.15 / 12.J.18).
Note the maximum permissible reaction forces (150 N / 250 N).
Hammelmann
13.C.1 – 10/13
Rotorjet – with pneumatic
rotary drive
 nozzle holder with five powerful,
highly cohesive jets especially
designed for metal surface
preparation
 for use with high pressure spray
guns Type SP 3000 and high
pressure lances
 high pressure connection, swivel
position adjustable
 integrated pneumatic drive
 adjustable speed
 wear resistant rotary action
 high pressure seals easily
replaced
 nozzle inserts recessed in
nozzle head
Code no.
 plastic protection cover or plastic
baffle plate.
00.00124.0135
Technical data
Technical data rotary joint (pneumatic)
Operating pressure:
Flow rate:
Weight :
High pressure connection:
max. 3000 bar
20 l/min
2,6 kg
M 14 x 1,5 LH
Accessories
(without picture)
Rotation speed:
100 - 3000
Performance:
max. 150
Operating air pressure:
4-6
Air input:
max. 25
Medium:
filtered and oiled air
Hose connection:
9 mm snap coupling.
Code no.
Portable pneumatic
control/maintenance unit with
5 m hose and snap coupling
09.00861.0001
9 mm i/d air supply hose with fittings,
20 m long
08.99109.0043
Tool for rotary joint
00.06224.0094
Baffle plate for concrete renovation
01.04397.0045
Tool for assembling the sealing and
carbide sleeve of the hollow shaft
00.06224.0149
Hammelmann
© Copyright Hammelmann Maschinenfabrik GmbH, Oelde, Germany. Rights reserved to modify design.
r.p.m.
W
bar
m³/h
13.B.1 – 06/15
Rotorjets
Type RDM 200
 Designed for mechanical
deployment
 Stainless steel housing
current brake
 Cooling sleeve
labyrinth seal
 Axial nozzle arrangement.
Nozzles can be arranged radially
for pipe cleaning
 Protective cover (against blast
back) optional
Typical applications
Technical data
 Cleaning pipes, boilers, furnaces
 Roughening concrete surfaces
Connection
thread
Code no.
M 24 x 1,5
09.00530.2042
M 36 x 2
09.00530.2043
Flow rate max.:
Pump power:
Speed of rotation:
1000 bar
160 l/min.
5 bar
90 – 230 kW
-1
100 – 1500 min
Weight approx.:
Length:
Diameter:
Connection A/F:
Connection threads:
No. of nozzles:
Optional:
Description
Code no.
Sledge
(suitable for internal diameter from 125 - 500 mm)
Hammelmann
00.01355.0005
8 kg
239 mm
90 mm
41 mm
see left
2
13.B.2 – 06/15
Rotorjets
Accessories for Type RDM 200
L
Nozzle offset
(mm)
A
27°
33
axial
90°
15
Item no.
10
Description
Protection cover
R
radial
Code no.
01.04397.0004
20
Screw
02.00830.0004
30
O-ring
04.00730.0033
40
Nozzle inserts
04.05318.0xxx
00.06048.0010*
50
Pulling mech.
* to be used solely with radial nozzles.
(see “R” above)
Round jet efficiency factor: 0,95
Item no.
W
Nozzle
angle
40
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
1,0
075
1,7
081
2,4
027
3,1
091
1,1
076
1,8
022
2,5
085
3,2
092
1,2
077
1,9
082
2,6
086
3,3
093
1,3
078
2,0
023
2,7
087
3,4
094
1,4
079
2,1
083
2,8
088
3,5
095
1,5
025
2,2
026
2,9
089
1,6
080
2,3
084
3,0
090
Example
Parameters:
Operating pressure:
Flow rate:
Select:
Correct nozzle Ø:
Brake fully engaged
Ø
p
Q
=
=
=
600 bar
100 l/min
2 x 1,8 mm
Nozzle insert dia.
Operating pressure
Flow rate
(without leakage)
page!
Hammelmann
13.B.3 – 06/15
Rotorjets
Type RDM 200
 Designed for automatic pipe
cleaning
current brake
 Cooling sleeve
labyrinth seal
 Radial nozzle arrangement.
Especially for pipe cleaning

Technical data
Pump power:
Speed of rotation:
1000 bar
5 bar
90 – 230 kW
-1
100 – 1500 min
Code no.
00.00786.0091
Weight approx.:
Length:
Diameter:
Connection A/F:
Connection thread:
No. of nozzles:
Optional:
Description
Code no.
Sledge
(suitable for internal diameter from 125 to 500 mm)
Hammelmann
00.01355.0005
11,5 kg
376 mm
128 mm
41 mm
M 36 x 2
4
13.B.4 – 06/15
Rotorjet
Accessory for Type RDM 200
L
Nozzle offset
(mm)
45°
0
75°
7
R
radial
10
Hammelmann
Nozzle inserts: Design “A“, Round jet,
efficiency factor: 0,95
Item no.
W
Nozzles
angle
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
1,0
075
1,7
081
2,4
027
3,1
091
1,1
076
1,8
022
2,5
085
3,2
092
1,2
077
1,9
082
2,6
086
3,3
093
1,3
078
2,0
023
2,7
087
3,4
094
1,4
079
2,1
083
2,8
088
3,5
095
1,5
025
2,2
026
2,9
089
1,6
080
2,3
084
3,0
090
13.B.5 – 06/15
Rotorjets
Version 1
Type RDM 250
deployment
Version 2
current brake
 Cooling sleeve
labyrinth seal
 Axial and radial nozzle arrangement especially for pipe cleaning

Technical data
Version 1
 Coating and paint removal
Flow rate
max.:
Pump power:
Speed of rotation:
Weight
approx.:
Length:
Diameter:
Connection A/F:
Conn. thread:
No. of nozzles:
Version 2
1500 bar
120 l/min.
5 bar
70 – 230 kW
-1
100 – 1500 min
8 kg
10 kg
267 mm
300 mm
90 mm
128 mm
32 mm
M 24 x 1,5 DKO
4
6
Nozzle inserts see table.
RDM 250
Version 1
09.00530.2046
Version 2
09.00530.2050
Optional:
Description
Code no.
Sledge
(suitable for internal diameters from
125 to 500 mm)
00.01355.0005
Pulling mechanism
(for use with radial nozzle arrangement)
00.06048.0010
Hammelmann
Code no.
13.B.6 – 06/15
Rotorjets
Version 1
L
Nozzle offset
(mm)
A
21°
22
axial
90°
10
R
radial
50
Version 2
W
Nozzle
angle
L
Nozzle offset
(mm)
A
27°
23
axial
45°
0
radial
90°
7
radial
R
Item no.
W
Nozzle
angle
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
0,9
074
1,3
078
1,7
081
2,1
083
1,0
075
1,4
079
1,8
022
2,2
026
1,1
076
1,5
025
1,9
082
1,2
077
1,6
080
2,0
023
Plug: 04.05215.0027
Nozzle insert selection and performance
range for Version 2 upon request.
Nozzle insert selection and optimum performance range for Version 1
Example
Parameters:
Operating pressure:
Flow rate:
Select:
Correct nozzle Ø:
Brake fully engaged
Ø
p
Q
=
=
=
1400 bar
80 l/min
2 x 1,3 mm
Nozzle insert dia.
Operating pressure
Flow rate
(without leakage)
page!
Hammelmann
13.B.7 – 06/15
Rotorjets
Type RDM 250 R
 Suitable for mechanically
deployed cleaning systems
current brake
Connection thread
M 24 x 1,5 DKO-S
 Cooling sleeve and optional
protective cover
labyrinth seal
 Suitable for adding extension
arms and nozzle holders with
adjustable angles

Example:
Rotorjet 09.00530.2062 with
nozzle holder 00.01599.0291 and
extension arm 00.03544.0012
Technical data
Flow rate max.:
Pressure loss:
Speed of rotation:
Weight approx.:
Länge:
Nominal diameter:
Diameter:
Connection A/F:
Connection thread:
Nozzle inserts:
Leakage:
Hammelmann
1500 bar
100 l/min.
5 bar
-1
100 – 1000 min
8,6 kg
273 mm
DN 6
90 mm
36 mm
M 24 x 1,5 DKO-S
Extension arm + Nozzle holder +
Nozzles type “A“ or “B“
1,0 (+ 3,0) l/min.
Code no.
09.00530.2062
Rotorjets
Accessories for Type RDM 250 R
Following nozzle holders can be used:
Angle
Quantity
Code no.
15°
4
00.01599.0291*
30°
4
00.01599.0292*
4
00.01599.0293*
45°
* Nozzle design A or B
Following extension arms can be used:
Length [mm]
Quantity
Code no.
50
4
00.03544.0010
75
4
00.03544.0011
100
4
00.03544.0012
200
4
00.03544.0013
300
4
00.03544.0014
Optional:
Description
Sledge
(suitable for internal diameters from
350 to 850 mm)
Pulling mechanism
(to be used solely with radial nozzles)
Hammelmann
Code no.
all for RDM
00.06048.0010
13.B.8 – 06/15
13.B.9 – 06/15
Rotorjets
Type RDM 300
deployment
 Low rotational speed
current brake
 Cooling sleeve
labyrinth seal
Nozzle can be arranged radially
for pipe cleaning
back) optional
Technical data
Flow rate max.:
Pump power:
Speed of rotation:
Connection
thread
Code no.
M 24 x 1,5
09.00530.2041
M 36 x 2
09.00530.2040
Weight approx.:
Length:
Diameter:
Connection A/F:
Connection threads:
No. of nozzles:
Optional:
Description
Code no.
Sledge
(suitable for internal diameters from 125 to 500 mm)
Hammelmann
00.01355.0005
1000 bar
180 l/min.
5 bar
70 - 300 kW
-1
50 - 250 min
8,2 kg
239 mm
90 mm
41 mm
see left
2
13.B.10 – 06/15
Rotorjets
W
Nozzle
angle
L
Nozzle offset
(mm)
A
27°
33
axial
90°
15
Item
no.
10
Description
Protection cover
Nozzle insert: Design “A“,
R
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
1,0
075
1,8
022
2,6
086
3,4
094
1,1
076
1,9
082
2,7
087
3,5
095
1,2
077
2,0
023
2,8
088
3,6
096
01.04397.0004
1,3
078
2,1
083
2,9
089
3,7
097
079
2,2
026
3,0
090
3,8
098
radial
Code no.
20
Screw
02.00830.0004
1,4
30
O-ring
04.00730.0033
1,5
025
2,3
084
3,1
091
3,9
099
04.05318.0xxx
1,6
080
2,4
027
3,2
092
4,0
100
1,7
081
2,5
085
3,3
093
40
Nozzle inserts
00.06048.0010*
50
Pulling mechanism
(see “R” above)
Example
Parameters:
Operating pressure:
Flow rate:
Select:
Correct nozzle Ø:
Brake 2/3 engaged
Ø
p
Q
=
=
=
600 bar
90 l/min
2 x 1,7 mm
Nozzle insert dia.
Operating pressure
Flow rate
(without leakage)
page!
Hammelmann
13.B.11 – 06/15
Rotorjets
Type RDM 400
deployment
current brake
labyrinth seal
Nozzles can be arranged radially
for pipe cleaning
back) optional
Technical data
Code no.
09.00530.2048
Flow rate max.:
Pump power:
Speed of rotation:
Weight approx.:
Length:
Diameter:
Connection A/F:
Connection thread:
No. of nozzles:
Optional:
Description
Code no.
Sledge
(suitable for internal diameters from 125 to 500 mm)
00.01355.0006
+ Retaining ring
01.03478.0606
+ Hexagon socket head screw
02.00825.0727
Hammelmann
1400 bar
200 l/min.
5 bar
200 - 500 kW
-1
50 - 250 min
28 kg
418 mm
130 mm
41 mm
M 36 x 2 DKO
2
13.B.12 – 06/15
Rotorjets
L
Nozzle offset
(mm)
A
R
27°
33
axial
--
90°
15
--
radial
Item no.
W
Nozzles
angle
40
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
Ø
(mm)
xxx
0,9
074
1,3
078
1,7
081
2,1
083
1,0
075
1,4
079
1,8
022
2,2
026
Code no.
1,1
076
1,5
025
1,9
082
10
Protection cover
01.04397.0004
1,2
077
1,6
080
2,0
023
20
Screw
02.00830.0004
30
Cylinder ring
01.00742.0142
40
Nozzle inserts
04.05318.0xxx
Item no.
Description
00.06048.0010*
50
Pulling mechanism
(see “R” above)
Hammelmann
13.B.13 – 06/15
Rotorjets
Type RDM 400 R
 Designed for pipe cleaning with
pipe internal-Ø of
min. 300 – max. 800 mm
(standard equipment for pipe
internal- Ø of 300 mm)
 Radial nozzle arrangement
 Reaction force driven
current brake
 With interchangeable nozzle
extension arms
labyrinth seal.


Technical data
 Cleaning pipes, boilers and
furnaces
Code no.
09.00530.2057
Flow rate max.:
Pump power:
Speed of rotation:
Weight approx.:
Length:
Diameter:
Connection thread:
No. of nozzles:
Nozzles:
2500 bar
100 l/min. (at ∆p = 30 bar)
200 - 500 kW
-1
50 - 500 min
42 kg
344 mm
260 mm (standard)
M 30 x 2
4
Type “I”
Optional:
Description
Code no.
Sledge
(suitable for internal from 400 mm to 1400 mm)
Hammelmann
00.06112.0097
13.B.14 – 06/15
Rotorjets
Accessories for Type RDM 400 R
L
Nozzle offset
(mm)
A
R
90°
40
--
radial
Item no.
Description
Code no.
Nozzle inserts: Design “I“, round jet,
Efficiency factor: 0,7
Item no.
W
Nozzle angle
40
Ø
mm
xxx
Ø
mm
xxx
Ø
mm
xxx
0,4
324
0,8
332
1,3
417
326
0,9
334
10
Pulling mechanism
00.06048.0010
0,5
30
Seal lens
04.00727.0019
0,6
328
1,0
336
50
Cap nut
04.02833.0086
0,7
330
1,1
337
60
Pressure ring
04.05992.0312
70
Pressure screw
04.05992.0361
80
Nozzle holder cpl.
(consists of item 30,
50, 60 and 70)
Item
00.01599.0190
20
Hammelmann
xxx
Nozzle extension arms
for pipe internal-Ø
300 mm
04.05992.0406
400 mm
01.03535.0953
500 mm
01.03559.0411
600 mm
01.03535.0948
700 mm
01.03559.0245
800 mm
01.03559.0407
Ø
mm
Code no.
13.B.15 – 06/15
Rotorjets
Type RDM 750
deployment
 Adjustable, dust tight and
encapsulated eddy current brake
labyrinth seal
 With protective cover Ø 250 mm
Technical data
Flow rate max.:
Pump power:
Speed of rotation:
Code no.
00.00786.0119
Hammelmann
Weight approx.:
Length:
Diameter:
Connection A/F:
Connection thread:
No. of nozzles:
Nozzle:
1600 bar
400 l/min.
5 bar
400 - 1000 kW
-1
100 - 1000 min
72 kg
635 mm
250 mm
46 mm
M 36 x 2 DKO
2
Type “L” (axial)
13.B.16 – 06/15
Rotorjets
Type RDM 750 R
 Designed for pipe cleaning with
pipe internal-Ø of approx.
max. 800 mm
 Radial nozzle arrangement
 Reaction force driven
current brake
labyrinth seal.


Technical data
 Cleaning pipes, boilers and
furnaces
Flow rate max.:
Pump power:
Speed of rotation:
Weight approx.:
Length:
Diameter:
Connection:
No. of nozzles:
Code no.
00.00786.0108
Nozzles:
1600 bar
300 l/min. (at ∆p = 5 bar)
400 - 1000 kW
-1
100 - 1000 min
65 kg
600 mm
166 mm (standard)
M 36 x 2 DKO
6 (radial)
2 x 45° - push
2 x 90° - radial
2 x 120° - pull
Type “L”
Accessory:
Description
Code no.
Pulling mechanism
Pulling load max. 20 KN
with bore ø 14 mm
D=77 mm; L=206 mm
Weight: 3,1 kg
Hammelmann
00.06048.0020
13.N.1 – 06/15
Rotorjets – with electrically
powered rotary joint
Picture shows rotorjet 09.00530.4639
Technical data
Operating pressure:
max. 1000 bar
Flow rate:
100 l/min
High pressure water
connection thread:
M 26 x 1,5 female
With high pressure packing version.
Complete with electric plug and 6 m connecting cable.
(cable protection hose not included)
4 pole Electric motor:
Power:
Rotation speed:
Voltage:
Frequency:
Protection:
Spray bar
kW
-1
min
V
Hz
8 pole Electric motor:
Power:
Rotation speed:
Voltage:
Frequency:
Protection:
0,55
720
3 x 400
50
IP 67
kW
-1
min
V
Hz
Code no.
Spray bar
Working
diameter
Code no.
305 mm
09.00530.4647
2 nozzles
215 mm
09.00530.4654
320 mm
09.00530.4642
4 nozzles
203 mm
09.00530.4630
406 mm
09.00530.4648
185 mm
09.00530.4627
203 mm
09.00530.4682
500 mm
00.00786.0199
220 mm
09.00530.4655
241 mm
09.00530.4639
370/110 mm
09.00530.4650
400 mm
00.00786.0206
400/280 mm
09.00530.4657
Working
diameter
2 nozzles
4 nozzles
8 nozzles
1,5
1450
3 x 400
50
IP 67
Hammelmann
6 nozzles
Accessory
Assembling tool of the thread
ring at the rotary drive,
code no. 00.00124.0110
Code no.
00.06224.0105
13.D.1 – 06/15
®
AQUABLAST surface blasters
Type FR 1000
 Spray bar driven by reaction
force of the water jets
labyrinth seal
 Optional pressure on/off control.
Mechanical bypass valve or
electric in 4-pole system signal
to pump. Special controls
available upon request.
 On/Off control by twin trigger
action
 Height adjustable spray bar
 Three wheel carriage
Technical data
 Grid cleaning
Working width:
Operating pressure:
Flow rate:
Pump power:
Speed of rotation:
 Floor cleaning
 Coating removal
Code no.
Spray bar for
concrete removal
(abrasive action)
00.03567.1299
Weight:
Length:
Height:
Unit width:
300
max. 1000
max. 160
5
max. 170
1500
115
approx. 1610
approx. 950
approx. 370
mm
bar
l/min.
bar
kW
-1
min
500
1000
160
5
170
1500
mm
bar
l/min.
bar
kW
-1
min
kg
mm
mm
mm
122
1825
900
550
kg
mm
mm
mm
Code no.
Pressure on/off
Ø 300
Ø 500
mechanical
00.00078.0025
09.00661.0180
electrical
---
09.00661.0179
Connection nipple see reverse!
Nozzle inserts “A“ and “B“
Hammelmann
13.D.2 – 06/15
®
AQUABLAST FR 1000
accessories and spares
Item
no.
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
180
190
Hammelmann
Qty.
4
1
1
4
4
1
1
1
1
1
1
4
4
4
4
4
1
200
1
210
1
2
2
Code no.
per single item
02.00671.0105
Screw
00.00387.0002
Spray bar housing
00.01750.0419
Sleeve
02.00380.0005
Spring washer
02.00309.0005
Nut
00.00062.0105
Rotary joint
01.03465.0544
Ring
02.00888.0308
Set screw
01.03465.0619
Split ring
01.00727.0058
Seal lens
00.03567.1230
Spray bar complete: items 70 – 150
04.00730.0033
O-ring
04.02833.0064
Retaining nut
02.00384.0006
Spring washer
02.00825.0009
Screw
see chapter 12
Nozzle insert design “A“
04.00731.0222
Glyd ring
Connection nipple
Operating pressure
M 22 x 1,5 DKO
NW 10 1500 bar 01.02981.0335
M 22 x 1,5 DKL
NW 12 1350 bar 01.02981.0077
M 24 x 1,5 DKO
NW 12 1800 bar 01.02981.0197
M 30 x 1,5 DKM NW 20 1050 bar 01.02981.0154
M 36 x 2
DKO
NW 20 1400 bar 01.02981.0331
M 42 x 2
DKO
NW 25
950 bar 01.02981.0355
01.01390.0010
Stability weight
02.00671.0121
Screw
02.00380.0007
Spring washer
Description
13.D.3 – 06/15
®
Type FR 1500
labyrinth seal
 Optional pressure on/off control.
Mechanical bypass valve or
electric in 4-pole system signal
to pump. Special controls
available upon request.
 On/Off control by twin trigger
action
 Four wheel carriage
 Choice of version with or without
protection for spray bar.
Aquablast without protection
Technical data
 Grid cleaning
 Paint removal on steel plates
Aquablast with protection
 Floor cleaning
 Removing road markings from
concrete
Working width:
Operating pressure:
Flow rate:
Pump power:
Speed of rotation:
Length:
Height:
Unit width:
Connection thread:
®
Weight
[kg]
Code no.
Grid cleaning
(without protection)
mechanical
90
09.00661.0159
electrical
73
09.00661.0150
Concrete removal
(with protection)
mechanical
--
---
electrical
81
09.00661.0173
Description
Extra weight, 33 kg
Hammelmann
mm
bar
l/min.
bar
kW
-1
min
approx. 1350 mm
approx. 900 mm
approx. 450 mm
M 24 x 1,5 DKO-S
Pressure on/off
AQUABLAST may
only be driven with
four nozzles. Nozzle
inserts Type “A“
and “B“
400
max. 1500
max. 150
5
max. 200
1000
Code No.
01.01390.0020
13.D.4 – 06/15
®
AQUAJET FR 1500
Item
no.
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
Qty.
1
1
2
4
4
4
4
1
4
1
1
1
1
1
1
1
4
4
4
4
4
Description
High pressure hose
Hose arrester
Karabiner hook
Screw
Spring washer
Screw
Spring washer
Sleeve
Nut
Rotary joint
Set screw
Flange
Split ring
Seal lens
Spray bar for grid cleaning
Spray bar for concrete removal
Spring washer
Screw
Sleeve
Nozzle insert design ”A“
Retaining nut
Spray bar complete:
items 90 – 180
without nozzle inserts
Hammelmann
Code no. /
per single item
04.04599.1262
04.04608.0038
02.01360.0003
02.00825.0047
02.00384.0008
02.00671.0121
02.00380.0007
00.01750.0432
02.00309.0007
00.00062.0130
02.00888.0308
01.01055.0681
01.03465.0510
01.00727.0044
00.03567.1138
00.03567.1178
02.00384.0006
02.00825.0020
00.01750.0426
see chapter 12
01.02833.0066
00.03567.1139
13.D.5 – 06/15
®
Type FR 3000
labyrinth seal
 Spray bar housing with special
seal and suction outlets
 Electrical pressure on/off control
in 4-pole system
 Cleaning up petrol, oil and
grease deposits
Construction industry
 Removing paints, mastics,
laitance, adhesion inhibitors,
renderings etc.
 Brightening thermoplastic
flooring
 Scarifying concrete and asphalt
Marine industry
 Removing paint, deck coatings,
rust etc.
Technical data
Working width:
Operating pressure:
Flow rate:
Speed of rotation:
Weight:
Length:
Height:
215
max. 3000
max. 40
60
max. 3000
76 kg
approx. 1410 mm
approx. 900 mm
Connections:
Bypass control cable:
High pressure hose:
ITT-plug
M 14 x 1,5 LH
Pressure on/off
Code no.
electrical 3000 bar
09.00661.0232
Nozzle inserts
Type “P“ (16 pieces)
Hammelmann
mm
bar
l/min.
bar
-1
min
13.D.6 – 06/15
®
AQUABLAST for marking removal
Type FRE 3000
 Electrically driven spray bar and
drive carriage controlled by a
frequency converter to achieve
optimal speed combination to suit
the job in hand.
 Twin handgrip pressure control.
 Four wheel drive carriage.
 “Anti splash” brush seal.
 Carriage drive cut out for manual
deployment.
Technical data
 road marking removal
Working width:
Op. pressure:
Flow rate:
Pressure loss at 40 l/min:
Pump power:
Spray bar speed:
2-pole motor:
Power requirement:
Code no.
00.00078.0017
Removal rates:
350
max. 3000
max. 40
60
max. 170
600 - 2400
3
380 - 400
50 - 60
approx. 200 - 1600
mm
bar
l/min
bar
kW
-1
min
kW
V
Hz
m/h
(depending upon marking material)
Weight:
Length:
Height:
Unit width:
No. of nozzles:
Nozzle type:
Connection thread:
approx. 150 kg
approx. 1600 mm
approx. 1000 mm
approx. 550 mm
20 pieces
“P“
M 26 x 1,5
(Pressure collar/Pressure nut)
Hammelmann
AQUABLAST ® -PLUS surface blasters
13.E.1 – 06/15
Type FRV 2500
 Available with and without direct
vacuuming of water and waste
material.
force of the water jets.
 Optimum spray bar design with
4 nozzle arms enabling the fitting
of up to 16 nozzle inserts.
dynamic high pressure seal.
seal and suction outlets.
 Mechanical bypass valve.
 Four wheel carriage.
Technical data
 Direct vacuuming allows the use
of high pressure water blasting in
factories and machine shops
without halting production or on
roads, upper storeys of buildings
etc. without the need for closure.
 Cleaning PLUS vacuuming of
petrol, oil and grease deposits.
 Removing PLUS vacuuming of
paints, mastics, laitance,
adhesion inhibitors, renderings
etc.
 Brightening PLUS vacuuming of
thermoplastic flooring.
Working width:
Flow rate max.:
Reaction force max.:
Perm. speed of rotation max.:
215
2500
40
60
550
3000
mm
bar
l/min.
bar
N
-1
min
Weight with 10 m suction hose:
Weight without suction hose:
Length approx.:
Height approx.:
130
86
1430
960
kg
kg
mm
mm
Connections:
High pressure hose:
Suction hose:
 Scarifying PLUS vacuuming of
concrete and asphalt.
Marine industry
M 14 x 1.5 LH, bs.
B-coupling
Pressure on/off
Mechanical with suction and pressure hose
09.00680.0013
Mechanical without suction and pressure hose
09.00680.0012
Description
Code no.
 Removal PLUS vacuuming of
paint, deck coatings, rust etc.
Suction and pressure hose
Nozzle inserts
Type “P“ – 16 pieces
Hammelmann
Code no.
00.04590.0019
AQUABLAST ® -PLUS FRV 2500
Accessories and Spares
Hammelmann
13.E.2 – 06/15
13.E.3 – 06/15
AQUABLAST ® PLUS FRV 2500
Code no. /
per piece
Item
no.
Quantity
10
1
12 m hose assy. incl. HP hose, suction hose
00.04590.0019
20
1
Rotary connection
00.00062.0175
30
1
16 jet spray bar
00.03567.9139
1
Inner brush, large (standard) only for Q ≥ 25 l/min.
04.00594.0023
1
Inner brush, fine, only for Q ≥ 25 l/min.
04.00594.0026
1
Outer brush, large (standard) for rough surfaces i.e. concrete
04.00594.0024
1
Outer brush, fine, for smooth surfaces i.e. steel plate
04.00594.0025
1
Protective cover for spray bar 01.01599.0373
01.04870.0066
1
01.04870.0068
1
01.04870.0067
1
01.04870.0069
70
1
Protection for hub
01.04380.1061
total
16
Nozzle inserts Type “P“, M 10
04.007900.xxxx
80
Plug M 10 (as required)
01.05214.0045
Description
40
50
60
Hammelmann
AQUABLAST ® -PLUS surface blasters
13.E.4 – 06/15
Type FRV 3000
 Available with and without direct
vacuuming of water and waste
material
 Optimum spray bar design with
4 nozzle arms enabling the fitting
of up to 16 nozzle inserts.
dynamic high pressure seal
seal and suction outlets
 Electrical pressure on/off control
in 4-pole system.
Technical data
roads, upper storeys of buildings
etc. without the need for closure
 Cleaning PLUS vacuuming of
petrol, oil and grease deposits
etc.
 Brightening PLUS vacuuming of
thermoplastic flooring
Working width:
Flow rate max.:
Reaction force max.:
Perm. speed of rotation max.:
215
3000
40
60
550
2500
mm
bar
l/min.
bar
N
-1
min
Weight with 10 m suction hose:
Weight without suction hose:
Length approx.:
Height approx.:
130
86
1430
960
kg
kg
mm
mm
Connections:
Bypass control cable:
High pressure hose:
Suction hose:
 Scarifying PLUS vacuuming of
concrete and asphalt
ITT-plug
M 14 x 1.5 LH, bs.
B-coupling
Pressure on/off
electrical without suction and pressure hose
Code no.
09.00680.0014
Marine industry
paint, deck coatings, rust etc.
Suction and pressure hose
with control cable
Nozzle inserts
Type “P“ – 16 pieces
Hammelmann
Code no.
00.04590.0028
Hammelmann
13.E.5 – 06/15
13.E.6 – 06/15
AQUABLAST ® PLUS FRV 3000
Code no. /
per piece
Item
no.
Quantity
10
1
12 m hose assy. incl. HP hose, suction hose, electric cable
00.04590.0028
20
1
Rotary connection
00.00062.0175
30
1
16 jet spray bar
00.03567.9139
1
Inner brush, large (standard) only for Q ≥ 25 l/min.
04.00594.0023
1
Inner brush, fine, only for Q ≥ 25 l/min.
04.00594.0026
1
Outer brush, large (standard) for rough surfaces i.e. concrete
04.00594.0024
1
Outer brush, fine, for smooth surfaces i.e. steel plate
04.00594.0025
1
01.04870.0066
1
01.04870.0068
1
01.04870.0067
1
01.04870.0069
70
1
Protection for hub
01.04380.1061
total
16
Nozzle inserts Type “P“, M 10
04.00790.xxxx
80
Plug M 10 (as required)
01.05214.0045
Description
40
50
60
Hammelmann
13.E.7 – 06/15
AQUABLAST ® - Drive
Surface blaster
 With direct vacuuming of water
and waste material.
 Optimum twin spray bar design
with 2 x 4 nozzle arms enabling
the fitting of up to 8 nozzle
inserts. Includes protective
plates.
labyrinth packing.
seal and suction connections.
roads, upper storeys of
buildings, cleaning landing
runways etc. without the need for
closure.
 Cleaning and vacuuming of
petrol, oil and grease deposits.
 Removing and vacuuming of
etc.
 Brightening and vacuuming of
thermoplastic flooring.
 Scarifying and vacuuming of
concrete and asphalt.
Technical data
Working width:
Flow rate max.:
Total weight:
Length:
Height:
Width:
890
ca. 3890
ca. 1950
ca. 1410
High pressure hose:
Vacuum:
Vehicle:
Drive:
Engine power:
Nozzle inserts
Type “A“ – 8 pieces
Hammelmann
mm
bar
l/min.
bar
kg
mm
mm
mm
M 24 x 1.5 DKO-S
- 0.5 bar
Kubota F3090
4-wheel
22.4 kw
Code no.
®
Aquablast - Drive
00.00078.0030
Suction hose DN 100
(Length: 30 m)
00.04590.0030
Vacuum system
00.05480.0009
1000
1000
240
10
13.E.8 – 06/15
AQUABLAST ® - Drive
Surface blaster
®
Aquablast-Drive
Code no. 00.00078.0030
High pressure
pump unit
Vacuum system
Code no. 00.05480.0009
Suction hose
DN 100, 30 m long
Code no. 00.04590.0030
Vacuum system
A two chamber system to vacuum and pre-filter the used high pressure water.
Consisting of:
 Stationary waste collection unit with rigid,
torsion free frame on shock absorbers and
forklift shoes.
 Waste water and solids are separated within
the system for further disposal.
 The pre-cleaned waste water is pumped out
of the unit so that downtime is minimised.
 Separator collects materials in suspension.
 Hinged doors to allow solids removal.
 De-watering pump with over suction
protection.
 Sight glass for monitoring content level.
Technical data
Hammelmann
Pre-separator:
630 Liter
Fiine-separator:
430 Liter
Throughput:
650 m³/h
Vacuum:
240 mbar
Drive:
3-cylinder diesel engine
Weight:
1.5 t
Description
Code no.
Vacuum system
00.05480.0009
13.F.1 – 06/15
Hand held AQUABLAST ®
Type FRWV 3000
 Ergonomic hand held cleaning
and stripping unit
 Twin trigger operation
 Aluminium housing with all water
bearing parts from stainless steel
 Brush arrangement ensures that
stand off distance is maintained
 Connection for vacuum system
 Cleaning, stripping vertical surfaces
 Ship repair – removing marine growths,
stripping hull coatings above and below the
water line
 Construction industry – removing paint from
facades and other concrete surfaces
 Cleaning tanks
Technical data
Working width:
140 mm
Operating
pressure:
max. 3000 bar
Speed of
-1
rotation:
approx. 2500 min
System
Code no.
4 pole system
09.00661.0223
with pneumatic control
09.00661.0224
Weight
pneumatic control approx. 9,3 kg
electric control approx. 7,7 kg
Height:
approx. 174 mm
Width incl.
hand grip:
approx. 350 mm
Accessory
protection for abrasive
work
Hammelmann
Code no.
8 nozzle inserts Type “P“
00.04877.0015
13.K.1 – 06/15
Vacuum unit
HAMMELMANN Vacuum unit
®
for operation with the HAMMELMANN AQUABLAST Plus (FRV 2500 + FRV 3000) and the hand held
®
AQUABLAST .
Comprising:
 Manually deployed waste collection unit.
 Waste water and solids are separated within
the system for further disposal.
 The pre-cleaned waste water is pumped out
of the unit so that downtime is minimised.
 Separator collects materials in suspension.
 Hinged doors to allow solids removal.
 Power connection via heavy duty plug with
phase inverter.
 De-watering pump with over suction
protection.
 Sight glass for monitoring content level.
 Lockable casters.
 High mobility with forklift shoes and lifting
eyes.
Technical data
Length:
Width:
Height:
Weight:
Tank capacity:
Power required:
Vacuum:
Suction volume:
Connections
Water out:
Suction in:
Centrifugal pump:
Vacuum pump:
approx. 1970
approx. 970
approx. 1800
approx. 670
mm
mm
mm
kg
Description
Code no.
Vacuum unit
00.05480.0010
2 x 230 l
5,5 kW
200 mbar
3
200 m /h
1“ GEKA coupling
B coupling
04.03226.0800
04.03239.0003
* The integral safety valve prevents too great a vacuum and
thus the overheating of the vacuum pump.
Accessories
Description
Code no.
Suction hose 50 mm i/d (standard), 15 m
00.04590.0005
Suction hose 65 mm i/d (extension), 10 m
00.04590.0006
Hammelmann
© Copyright Hammelmann GmbH, Oelde, Germany. Technische Änderungen vorbehalten.
13.K.2 – 06/15
Vacuum system
with vacuum unit and separator
Hammelmann VACU-TAINER ® 2500
®
for operation in conjunction with the HAMMELMANN SPIDERJET 3000
Comprising:
Vacuum unit
Separator
 In sound damping container (H x W x L)
2500 x 2050 x 2000 mm
with forklift shoes.
 Prefractionator tank
3
capacity:
approx. 2,4 m ,
vaccum resistance: 50 %
 Roots blower.
 Dimensions (H x W x L):
2245 x 2300 x 2990 mm
 Manual speed adjustment.
 Suction connection: 5 inch
 Engine complete with fuel filter and exhaust.
 Air connection:
 Safety filter changeable.
 Emptying via gate valve.
 Unit and diesel engine controls accessed from
outside the system via a lockable door.
 Monitors: electrical level switch and tank
full signal
 Continuous performance: approx. 2610 m /h,
(Zero load)
3
 Speed of rotation:
approx. 1200 – 2500 min
 Suction connection:
DN 150
 Continuous partial
vaccum:
up to 50 %
 Powered by:
Deutz diesel engine
 Rating:
55 kW at 2500 min
 Capacity fuel tank:
approx. 120 L
Hammelmann
5 inch
 Manhole
-1
-1
 Tank fitted with de-watering pump.
Description
Code no.
Vacuum system
00.05480.0001
© Copyright Hammelmann GmbH, Oelde, Germany. Technische Änderungen vorbehalten.
13.H.1 – 06/15
Spiderjet ® 3000
AQUABLAST ® SPIDERJET 3000 surface
preparation unit.
The SPIDERJET 3000 consists of:
 pneumatic twin wheel drive.
 electronically monitored vacuum with
automatic UHP water shut off
 Electric-pneumatic precise control unit
enabling automatic straight line running
 winch with safety arrester.
 air pressure maintenance unit.
 Optional:
air powered winch
Spiderjet ® 3000
 Standard:
two counter balance safety arresters
Code no.
incl. pneumatic control
manual
09.00661.0221
incl. remote control
00.00078.0026
(as discribed below)
Optional
Elekctrical control
cabinet
Portabled operator’s
panel with radio remote
control
Technical Data
 Working width:
 Op. pressure:
374 mm
to 3000 bar
 Flow rate:
Pneumatic
control cabinet
230V 50 Hz/60 Hz
Power supply
Code no.
Compressed air
cold dryer incl.
pre-filter
00.05150.0019
to 50 l/min.
 Weight:
105 kg
 Length:
775 mm
 Width:
780 mm
 Conn. thread
for HP hose: M 30 x 2
 Vacuum:
to 0.8 bar
dependant upon work surface
 Suction connection:
 Vacuum rate:
Transportation uni
Code no.
 No. of nozzles:
P
 Air pressure qty.:min. 29 l/sec.
 Air pressure:
4 – 8 bar
 Air pressure
connection:
nipple f. ¾“ hose
 Stripping rate: approx. 70 m²/h
dependant upon coating quality
 Movement speed:
04.00888.0009
Hammelmann
16
 Nozzle type:
Air heater
Air drier incl. prefilter
Performance:
1800 l/min at 16 bar
Supply:
230 V / 50 Hz / 900 W
Dimension:
480 x 375 x 530 mm
Weight:
40 kg
Rate of separation: at 35°C – 95%
at 50°C – 50%
DN 100
1500 m³/h
at 50 % vacuum
6 m/min.
13.L.1 – 10/13
For working on surfaces an
abrasive material can be added to
the water jet.
 For use with high pressure water
blasting guns SP 1000,
SP 1000 ME, SP 400 and high
pressure lances
 Boride carbide nozzle insert
 Interchangeable water nozzles
 Universal hose coupling
 Casting polishing
 Shaping steel components
 Profiling new metal surface to
accept protective coatings
 Cleaning and shaping steel,
stone and concrete surfaces
Technical data
Op. pressure:
Working
pressure:
Code no.
Recommended op. pressure:
300 – 350 bar.
Recommended flow rate:
approx. 60 l/min
09.00670.0001
max. 1000 bar
max. 400 bar
Please pay attention to
reaction force!
Weight:
approx. 1,6 kg
Length:
approx. 200 mm
Diameter:
approx. 60 mm
Connection thread:⅜ inch BSP
Please wear suitable
protective clothing!!
Container for abrasives
Technical data
 Robust construction,
galvanised
 Stainless steel filling sieve
 Metering valve with air intake
 6 m abrasive suction hose
Hammelmann
Abrasive volume:
60
Weight, empty:
8
Height:
880
Diameter:
390
Air connection:
Hose nozzle
15 mm
Abrasive hose
19 mm
litres
kg
mm
mm
i/d
i/d
Code no.
09.00670.0002
13.L.2 – 10/13
SP 1000 / SP 1000ME
SP 400
Item
no.
10
Accessories
Description
Code no.
Item
no.
Description
Code no.
Type
SP 1000, SP 1000 ME,
SP 400
see chapter 12
70
High pressure lance
with retaining nut
see chapter 12
80
O-ring
04.00730.0064
Nozzle inserts, design “B“
see chapter 12
Fan jet nozzle 15°
O-ring
04.00730.0033
Support ring
04.00738.0405
Spare part
20
High pressure water blasting gun
Boride carbide
nozzle insert
04.00779.0001
Connecting injector to blasting gun
Item
no.
Spare parts
Description
Code no.
with 6 m hose,
items 30 – 50
09.00670.0002
30
Abrasive container
00.00231.0015
40
Hose connector
04.05993.0647
45
Hose connector G½”
M30 x 2 (L)
*04.05993.0712
50
Hose clamp
04.04482.0124
60
Hose (per metre)
04.04590.0071
Type SP 1000 / SP 1000 ME
direct
Type SP 400
with high
pressure lance
(item 70)
Hammelmann
* has to be exchanged for the nipple M22 x 1,5 (included in
Maschinenfabrik
GmbH Zum Sundern 13-21 • Germany Telefax (0 25 22) 76-444
Pos. 30).
13.L.3 – 10/13
For working on surfaces an
abrasive material can be added to
the water jet.
 For use with high pressure water
blasting guns SP 3000 E,
SP 3000 MB, SP 3000 MBE,
SP 3000 E-2H and high
pressure lances
 Boride carbide nozzle insert
 Interchangeable water nozzles
 Universal hose coupling
 Roughening of surfaces
 Profiling new metal surface to
accept protective coatings
 Cleaning stone and concrete
surfaces
Code no.
Technical data
09.00670.0003
Op. pressure: max. 3000 bar
Weight:
approx. 2,1 kg
Length:
approx. 200 mm
Diameter:
approx. 60 mm
Connection
thread:
M 14 x 1,5 LH
Please pay attention to
reaction force!
Please wear suitable
protective clothing!!
 Robust construction,
galvanised
 Stainless steel filling sieve
 Metering valve with air intake
 6 m abrasive suction hose
Hammelmann
Technical data
Abrasive volume:
60
Weight, empty:
8
Height:
880
Diameter:
390
Air connection:
Hose nozzle
15 mm
Abrasive hose
19 mm
litres
kg
mm
mm
i/d
i/d
Code no.
09.00670.0002
13.L.4 – 10/13
SP 3000 E / SP 3000 E-2H
SP 3000 MB / SP 3000 MBE
Item
no.
10
Accessories
Description
Nozzle inserts,
design “R“
Fan jet nozzle 15°
Boride carbide
nozzle insert
Description
Code no.
see chapter 12
Spare part
20
High pressure water blasting gun
Type
SP 3000 E, SP 3000 E-2H,
SP 3000 MB, SP 3000 MBE
UHP Lance
Code no.
see chapter 12
see chapter
12 + 14
04.00779.0001
Connecting injector to blasting gun
Item
no.
Spare parts
Description
Code no.
with 6 m hose,
items 30 – 50
09.00670.0002
30
Abrasive container
00.00231.0015
40
Hose connector
04.05993.0647
45
Hose connector G½”
M30 x 2 (L)
*04.05993.0712
50
Hose clamp
04.04482.0124
60
Hose (per metre)
04.04590.0071
Type
SP 3000 E, SP 3000 E-2H,
SP 3000 MB, SP 3000 MBE
* has to be exchanged for the nipple M22 x 1,5 (included in
Pos. 30).
Hammelmann
Postfach 3309 • D-59282 Oelde
Telefon (0 25 22) 76-0
direct
Thermacon
12.P.1 – 09/11
 for use with fan jet nozzle
type „R“
 suitable for use with a single
nozzle holder or with rotorjets.
 adjustable temperature/operating
pressure combinations.
Nozzle assembly
The Thermacon is installed
between the blasting gun and the
selected nozzle.
Application examples
 Graffiti removal.
Rotorjet
 Removal of oils, greases and tar
based products.
Code no.
 Cleaning sensitive surfaces such
as sandstone facades.
 Cleaning machinery and
machine parts etc.
without nozzle holder
00.00787.0001
with nozzle holder
Type “R”
00.00787.0002
Accessories
(without picture)
Code no.
Technical data
Op. pressure:
Temperature:
Flow rate:
Length:
Weight :
Connection thread:
Inlet:
max. 3500
max. 95
25
179
0,8
bar
°C
l/min
mm
kg
M 20 x 1,5
(Pressure ring 04.05992.0312/pressure screw 04.05992.0361)
Outlet:
M 14 x 1,5 LH
Nozzle holder Type “R”
00.01599.0294
Fan jet nozzle Type “R”
04.00781.0650
Performance examples
1.
Inlet temperature 20°C - without engine heat exchanger
at inlet
at outlet
op. pressure:
3000 bar
400 bar
water temperature:
20 °C
85 °C
2.
Inlet temperature 40 °C – with engine heat exchanger
at inlet
at outlet
op. pressure:
3000 bar
700 bar
water temperature:
40 °C
95 °C
op. pressure:
water temperature:
Hammelmann
2500 bar
40 °C
700 bar
85 °C
Application engineering
Standard
Surface blasting
Tank cleaning
Tube bundle cleaning
Pipe and sewer cleaning
Water hydraulic
Abrasive cutting
Hammelmann GmbH
Carl-Zeiss-Straße 6-8
59302 Oelde• Germany
[email protected]
Telefon (0 25 22) 76-0
Telefax (0 25 22) 76-140
www.hammelmann.de

Product catalogue, surface blasting systems

Transcription

Similar documents

Product catalogue, tank cleaning systems

Journal 2294 - Patents Office