Anmeldung - Universität Zürich

Transcription

Universität Zürich
Organisch-chemisches Institut
Anmeldung
eines privaten oder mobilen Rechners am DHCP-Server des OCI
A
A
A
A
A
Name:
Vorname
Arbeitsgruppe
Telefon Labor
Email
Wohnadresse:
A
Strasse
PLZ
A
Ort
Nr.
A
A
Rechnerinfo:
A
A
MAC-Adresse (Kabel)1):
MAC-Adresse (WLAN)2):
1) Die Media Access Control Adresse besteht aus 6 zweistelligen Hexadezimalzahlen, Beispiel:
00:03:93:ce:2f:66
2) Nur für Systeme mit installierter WLAN-Infrastruktur
A
Betriebssystem:
Der/die Antragsteller/in hat die EDV-Reglemente des OCI zur Kenntnis genommen. Sie werden
vollumfänglich anerkannt.
https://www.unizh.ch/oci/ssl-dir/EDV/reglemente.shtml
Der/die Antragsteller/in ist für das "Wohlverhalten" des Rechners auf dem Netzwerk
verantwortlich. Der Betreiber eines Rechners am DHCP-Netz des OCI ist daher verpflichtet:
a) ein aktuelles Virenschutzprogramm aktiv zu halten und immer die neuesten
Erkennungsdateien zu laden. (http://www.id.unizh.ch/software/antivirus/download/)
b) Das Betriebssystem zu pflegen (Sicherheitsupdates installieren, gute Passworte verwenden,
keine potentiell gefährliche Software zu installieren, usw)
Der DHCP-Server führt ein Log über alle Adressanforderungen und die Dauer der jeweiligen
Adresszuordnung.
Der/Die Unterzeichnende bestätigt mit Unterschrift die Vollständigkeit und Korrektheit obiger
Angaben.
Ort, Datum
Unterschrift
© R.W. Kunz, OCI, 23.2.2005, page 1 of 3
How to Find your MAC Address
MAC stands for Media Access Control and not for Macintosh. The MAC or Ethernet address is
sometimes referred to as Hardware or Adapter address. This address is permanently stored on the
network interface card (NIC) you will be using to connect to the network.
Die Media Access Control (MAC) Adresse is displayed as 6 two digit hexadecimal numbers, separated by colons, Example: 00:03:93:ce:0f:66. Some systems do not display the leading
zeros: 0:3:93:ce:f:66 or use dashes and upercase characters: 00-03-93-CE-0F-66
The method of locating the Adapter Address for a particular computer depends on the operating
system being used.
Windows 95/98
Once you have your ethernet card and TCP/IP installed, run winipcfg (click the Start menu, then
menu option Run, then type winipcfg in the text box labeled Open. With W95 you may alternatively use an MS-DOS shell window) A window will appear called "IP Configuration". Make
sure you do not select PPP Adapter, Dial-Up Adapter, or AOL Adapter--those entries are not for
your ethernet card.
If you do not see your ethernet card, it is not installed properly. After you select your ethernet card,
look for a box marked Adapter Address. This is your MAC address. If your Adapter Address has
a "-" between each set of numbers, when you enter these numbers into the registration page, replace
the "-" with a ":"
Windows NT/2000/XP
Once you have your ethernet card and TCP/IP installed, run ipconfig /all from an MS-DOS
shell window (click the Start menu, then menu option Run, then type cmd in the text box labeled
Open to open an MS-DOS shell window.) A window will appear. In that window type: ipconfig
/all. Find the section titled Ethernet adapter Local Area Connection (this title may differ
slightly), and look for an entry labelled Physical Address. This is your MAC address. Make sure
you do not select PPP Adapter, Dial-Up Adapter, or AOL Adapter--those entries are not for your
ethernet card.
If you do not see your ethernet card, it is not installed properly. If your Adapter Address has a "-"
between each set of numbers, when you enter these numbers into the registration page, replace the
"-" with a ":"
GNU / Linux
On GNU/Linux systems, the ethernet device is typically called eth0. In order to find the MAC
address of the ethernet device, type at the shell prompt: /sbin/ifconfig -a and look up the
relevant info. For example:
$ /sbin/ifconfig -a
eth0
Link encap:Ethernet HWaddr 00:03:93:1C:C1:C6
UP BROADCAST RUNNING MULTICAST MTU:1500
The MAC address is the HWaddr listed on the first line. In the case of this machine, it is
00:03:93:1C:C1:C6. If no ethernet device shows up, it means that either your ethernet card
driver is not loaded or your ethernet card was not recognized by the kernel.
FreeBSD / MacOS X in Terminal Mode
On a FreeBSD machine the command dmesg will display the MAC address, among lots of other
things. Try something similar to:
% dmesg | egrep '.*:.*:.*:.*:.*:.*'
UniNEnet: Ethernet address 00:03:93:1c:c1:c6
Hewlett-Packard HP/UX
On HP/UX systems, the ethernet device is typically called lan0. Type lanscan and look up the
relevant info. For example:
$ lanscan
Hardware Station
Dev Hardware Net-Interface NM Encapsulation Mjr
Path Address
lu
2.0.2 0x08000935C99D 0
State
UP
NameUnit State ID Methods
lan0
UP
4 ETHER
Num
52
Note: HP systems remove the :'s from the MAC address (0x08000935C99D). In the case of this
system, the MAC address is 08:00:09:35:C9:9D. The leading 0x is a prefix that identifies the
following string as being a hexadecimal number.
Solaris/SunOS
On Solaris and SunOS systems, the ethernet device is typically called le0, ie0, or hme0. In order
to find the MAC address of the ethernet device, you must first become root, through the use of su.
Then, type /sbin/ifconfig -a and look up the relevant info. For example:
# /sbin/ifconfig -a
le0: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500
inet 131.225.80.209 netmask fffff800 broadcast 131.225.87.255
ether 8:0:20:10:d2:ae
Note: Solaris and SunOS strip off the leading 0 commonly included in the MAC address. In the case
of this machine, the MAC address is 08:00:20:10:d2:ae
Macintosh general procedure for OS 9/X
Start Apple System Profiler. Than identify "Ethernet address" in the network section.
Macintosh OS X
From the Apple Menu, open System Preferences and select the Network control panel. Select your
ethernet card under Configure:, and select the TCP/IP tab. The MAC address is listed beside
Ethernet Address:.
Macintosh with Open Transport
First, open the TCP/IP control panel. Select info from the main control panel. The MAC address is
displayed as the hardware address.
Macintosh with MacTCP
Open the MacTCP control panel. You should see an icon labeled Ethernet. Hold down the option
key and click this icon. A number should appear beneath the icon, this is your MAC address.

Anmeldung - Universität Zürich

Transcription

Similar documents

USB 2.0 FAST ETHERNET PRINTSERVER

Avira Rescue System