limited - Farndons.com

Transcription

LIMITED
RETAIL | PACKAGING | CUTTING | MANUFACTURING
SOLUTIONS
Welcome to the New Look Farndons Catalogue!
Established in 1985, Farndons Ltd. is a family run business.
We supply solutions for all your textile,
Although we have thousands of products listed,
manufacturing, processing and retail needs. Our
our buyers are constantly updating our product
endeavour is to provide products of reputable quality.
range to bring you the best products on the market
The catalogue is broken down into four colour coded
at a price that suits your pocket!
sections, making it easy for you to find the products
We welcome enquiries for products not featured
you are looking for, RETAIL, PACKAGING, CUTTING
in this catalogue and we will go the extra mile
and MANUFACTURING.
to find the products that fit your requirements.
Order by:
Tel: 0161 480 5050
Email: [email protected]
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Web: www.farndons.com
We welcome payment by:
Cash
Farndons Limited.
Cheque
13 Broadhurst Street,
Stockport,
Cheshire
SK3 8JH
Credit Card
Credit (to approved accounts only)
Disclaimer: No part of this brochure may be copied or reproduced in any form. We have taken every care to check this brochure thoroughly, however,
Farndons Limited accept no responsibility for any errors or omissions arising from these specifications. All colour representation shown is as
printing limitations allow. We reserve the right to change any details within this brochure without notice. Contents
Retail
Page
Tagging Guns & Needles................................................1 - 4
Attachments...................................................................5 - 6
Micropitch, Micropin, Buttoneer
& Super Heavy Duty Products........................................7 - 8
Extra Heavy Duty, O Tag &
Double Wishbone Products.................................................8
V Tool & Fasloop Products...................................................9
ST 9500 & Mattress Tool Products.................................... 10
System 1000 & Elastic Stapling Products.......................... 11
Q-Clip, Fire-A -Tag Loops,
Cable Ties & Sample Seals................................................ 12
Hook Attachments, Display &
Insert Hooks, Garment Clips
& Security Set Seals...................................................13 - 14
Labels.........................................................................15 - 17
Tickets............................................................................... 18
Hang Tabs & Warehouse Products..................................... 19
1 - 23 RETAIL SOLUTIONS
24 - 39 PACKAGING SOLUTIONS
Labelling Guns & Labels....................................................20
Size Cube Ranges.......................................................21 - 22
40 - 79 CUTTING SOLUTIONS
80 - 124 MANUFACTURING SOLUTIONS
Supplying the UK & Europe
Sign Holders, Poster Grippers
Card Holders, Garment Rails & Hanger Stackers..............23
RETAIL SOLUTIONS
MK1 Tagging Guns & Needles
012501 Fire-A-Tag Gun
012503 Standard Banok Gun
• Separate release
mechanism
• Great for the retail
& trade industry
• Suitable for most
applications
•S
uper smooth action
•S
uitable for standard
spaced attachments
• Micropitch compatible
012002 Standard Tach-it Gun
Arrow 5S Gun
• Made in Japan
• Separate release
mechanism
• Economically priced
• Well proven
• Micropitch
compatible
• Smooth action
012031
Fire-A-Tag
Needles
Per 5
012008
Standard
Swiss Needle
012009 Heavy
Duty Needles
Per 5
Per 5
• Suitable for most applications
1
• All steel construction
•S
wiss made
• Good quality
Call Free on: 0330 123 1950
Fax: 0161 429 7776
wiss made
•S
•H
eavy duty applications
RETAIL SOLUTIONS
MK11, MK111 & V Tagging Guns & Needles
KTS Standard MK111 K-Tool
Tagging Gun
10651 Avery Dennison
MK111 Gun
01250S MK11 Fire-A-Tag Gun
• New to the UK
• Fascinating design and colour
•M
icropitch compatible
• Super smooth action
•S
eparate release
mechanism
• Well proven
• Suitable for standard
space attachments
• Very robust tool
• Light positive action
• Takes MK11 Needles
UTSG U-Tach Gun
11500 Avery Dennison MK V Tool
•M
aximum flexibility tagging
• Interchangeability anvil and tag holder guards for reduced operator risk
•S
eparate release mechanism
•N
o touch needle safety feature
•R
eliable and well proven
•F
irst ever interchangeable needle guard design
• Waste chute for clips
012025 Swiss Needles
012014 Heavy Duty Needles
012029 Fire-A-Tag Needles
11” Knife Edge
uitable for most
•S
applications
• MK11
• Swiss made
• Suitable for all
applications
• Swiss made
•E
conomically priced
Per 5
Call Free on: 0330 123 1950
•G
ood quality
Fax: 0161 429 7776
• Heavy duty MK11
Per 5
• All steel
Per 5
2
RETAIL SOLUTIONS
MKI & MKII Fine Guns & Needles
012503X Fine MK1 Banok Gun
A9F Arrow Fine MK11 Tagging Gun
• Well proven
• MK11 Fine economy gun
• Suitable for standard spaced
fine attachments
• Separate release mechanism
012013 Fine MK1
Needles
• Swiss made
• All steel
UTFG MK11 Fine
U-Tach Gun
KTG Fine MK111 K-Tool
Fine Tagging Gun
10312 Avery Dennison
MK111 Fine Gun
•S
eparate release mechansim
• Two way tag release mechansim
• Well proven tool
•M
• Rear runner bar outlet
•M
• Well proven brand
• Rail guide release mechanism
•L
ight positive action
012026
MK11 Fine
Needles
11501 Avery Dennison MK V Fine Tool
• Swiss made
• Plastic shank
Per 5
012032 MK11
Fine All Steel
Heavy Duty
Needles
• Maximum flexibility tagging
3
• Innovative, unexposed and retractable needle design
• Swiss made
• Reduced operator risk
• Heavy duty MK11
• First ever interchangeable needle guard design
Per 5
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Per 5
RETAIL SOLUTIONS
Standard & Fine Long Guns & Needles (MKI & MKII)
NL1 Premium Long
Needles
012012 Standard
Long Banok Needles
012503SL Standard Long
Banok Gun
• MK1 Long Standard
• Very sturdy construction
• MK1 Long Standard
• Swiss made
Per 5
• Made in Japan
01260SL Standard Mk11 Long Fire-A-Tag Gun
Per 3
012503XL Fine Long Banok Gun
• Light and easy to use
•M
• Very competitively priced
• Well proven brand
Standard Needles
11”
Knife
Edge
012030
MK1
Long Fine Needles
Per 5
Per 5
• MK11 Long Fine
• Swiss made
Call Free on: 0330 123 1950
• All steel
• Swiss made
Fax: 0161 429 7776
4
RETAIL SOLUTIONS
Standard Attachments
Fire-A-Tag 50 Clip Polypropylene Attachments
FTP15
15mm
per 5,000
FTP20
20mm
per 5,000
FTP25
25mm
per 5,000
FTP40
40mm
per 5,000
FTP50
50mm
FTP65
FTP125
U-Tach 120 Clip Close-Pitch Attachments
• 120 clip
UTS15
15mm
per 12,000
UTS20
20mm
per 12,000
UTS25
25mm
per 12,000
UTS40
40mm
per 12,000
per 5,000
UTS50
50mm
per 12,000
65mm
per 5,000
UTS65
65mm
per 12,000
125mm
per 5,000
UTS65B
65mm
per 12,000
Avery Dennison Polypropylene Attachments
• Smooth action
• Well-proven
Avery Dennison Nylon Attachments
• Very smooth
• 50 clip
• 50 clip
• Smooth action
• 20 - 125mm sizes
• 20, 40 & 65mm sizes
• Famous blue box
• Well established brand
02121
20mm
per 5,000
02140
25mm
per 5,000
02141
40mm
per 5,000
02021
20mm
per 5,000
02150
50mm
per 5,000
02040
25mm
per 5,000
02161
65mm
per 5,000
02041
40mm
per 5,000
02181
125mm
per 5,000
02061
65mm
per 5,000
Avery Dennison Micro Spaced 100 Clip Attachments
•F
or use only with a standard
micropitch compatible gun
• 100 clip for time saving
• Very smooth action
•1
0,000 inners & 100,000 outer boxes
5
Call Free on: 0330 123 1950
Fax: 0161 429 7776
04201
13mm
per 10,000
04221
25mm
per 10,000
04251
50mm
per 10,000
04261
65mm
per 10,000
RETAIL SOLUTIONS
Fine Attachment Range
Fine T-Ended U-Tach Close
Pitch Attachments
Fine Avery Dennison 100 Clip
Attachments Microspaced
04100
15mm
per 10,000
04101
20mm
per 10,000
04121
25mm
per 10,000
40mm
per 10,000
65mm
per 10,000
5mm
per 12,000
UTF-7
7mm
per 12,000
UTF-7B
7mm
Black
per 12,000
04141
UTF-11
11mm
per 12,000
04161
UTF-5
Fire-A-Tag Std Nylon Attachments in Natural & Colours
Fire-A-Tag Std Nylon Attachments in Natural & Colours
FTN-15
15mm
Natural
per 10,000
FTN-15R
15mm
Red
per 10,000
FTN-15B
15mm
Black
per 10,000
FTN-25
25mm
Natural
per 10,000
FTN-25R
25mm
Red
per 10,000
FTN-25B
25mm
Black
per 10,000
FTN-35
35mm
Natural
per 10,000
FTN-60
60mm
Natural
per 10,000
FTN-60R
60mm
Red
per 10,000
FTN-60B
60mm
Black
per 10,000
FTN-60GR
60mm
Green
per 10,000
FTN-60BE
60mm
Blue
per 10,000
Yellow
per 10,000
FTN-60YW 60mm
Call Free on: 0330 123 1950
11” Knife Edge
Fax: 0161 429 7776
6
RETAIL SOLUTIONS
Micro Fastener Gun, Needles & Attachments
11040 Micropitch Gun
11044-0 Micropin Standard
Hooktool
• Tool uses small nylon fasteners to hold
items flush and firmly together
• Allows for safe easy separation.
• A simple pull is
all it takes
to remove a
micro fastener
11045-0 Micropin Extended
Hooktool
•S
ame as 11044-0
but with extended
anvil.
• A system used in
shirt fastening.
Nylon Fasteners - per 10,000
11041 Micropitch Needle
11042-0
4.4mm
White
11046-0
4.4mm
Black
11047-0
5.4mm
White
11048-0
5.4mm
Black
11133-0
6.2mm
White
11134-0
6.2mm
Black
Per 4
Buttoneer Tool, Attachments & Needles
06110 Buttoneer Gun
Useful in assembly applications; pleating, bar tacking, spacing, closing or joining. Ideal for the automotive industry to attach
spacer blocks inside the weather stripping on doors.
06091
6mm
Black Small
per 5,000
06092
6mm
White Small
per 5,000
06101
10mm
Black Large
per 5,000
06102
10mm
White Large
per 5,000
Uses 012025 Needles feature on page 2
Super Heavy Duty Gun, Needles and Attachments
10637 SHD Tool
7
Call Free on: 0330 123 1950
Super Heavy
Duty Attachments
10643 Needles
10575
19mm
per 5,000
10576
31mm
per 5,000
Fax: 0161 429 7776
Per 4
RETAIL SOLUTIONS
Extra Heavy Duty Guns, Needles & Attachments
10778 Blunt Needle Tool
10776 Blunt Needle
The Extra Heavy T ended fastener system is designed to simplify
in-process shoe lasting & packaging
Per 4
10789 Pointed Needle Tool
Attachments
10777 Needle Replacement
10764
40mm
per 2,500
10767
49mm
per 1,000
Per 4
O Tag Range of Attachments
•C
ircular paddle 4 times larger
than hole
• 100% Secure
• Effectively prevents fraud
OT-25
25mm
per 5,000
OT-40
40mm
per 5,000
OT-65
65mm
per 5,000
11” Knife Edge
Double Wishbone Attachments (double pin)
FDW-38
38mm
Per 5,000
• Designed for pairing items such
as gloves, socks & rugs
• Hanging soft goods
• Securing products in place
Call Free on: 0330 123 1950
Fax: 0161 429 7776
8
RETAIL SOLUTIONS
V-Tool and Attachments
V-Tool
• Reduces the tedious task of
hand tagging by 50%
• Needle-free
• Ideal for belts, glasses,
handbags, footwear, toys,
luggage
• Tamper evident
• Lightweight & ergonomic
V Loops
V-TG V Tool Gun
VL-3
3”/ 75mm
per 5,000
VL-5
5”/ 130mm
per 5,000
Fasloop Gun and Attachments
FL-G Fasloop Gun
Fasloops
• Applies loop fasteners in a single stop operation.
• More efficient, faster and easier than hand applied loop fasteners.
• Saves wear, tear and injury to fingers.
FL80
80mm
per 5,000
FL130
130mm
per 5,000
• Can be used on hardgoods and accessories
• Loops have an arrow and barrel configuration that forms a strong
mechanical lock.
9
Call Free on: 0330 123 1950
Fax: 0161 429 7776
RETAIL SOLUTIONS
Avery Dennison Plastic Staple ST9500 Fastener System
Plastic Staple ST 9500 Fastener System 15000-0
15001-0 1/2”/13mm Staple
The expertly designed plastic staple st 9500
fastener system.
Per 25,000
The plastic staple was first introduced over 15 years ago as a model
of innovation and quality. Now, after years devoted to further
perfecting the technology, the innovation is taken to the next level
with the plastic staple ST 9500 fastener system.
Ensure perfect plastic staple
fastener size with variable
needle spacing from 6-12mm
15010-1 Needle for ST9500
10442 Foot Switch
Actuator
Per 4
10791-0 Mattress Tool
Mattress Fastening System
• Fast working. Holds better than glue or adhesives
• Eliminates
messy
sprays
11”
Knife
Edge
• Insert long extra heavy duty needle through multiple foam layers
and click
• Mattress foam layers stay secure long after foams and glue fail
• Eliminates curing time.
• Immediate securing of flanges
• Fastens pocket springs to foam encasements
Takes the same range of attachments as for the extra heavy duty tools featured on page 8.
It can be fitted with either the 10776 Blunt Needle or the 10777 Sharp Needle featured on page 8.
Call Free on: 0330 123 1950
Fax: 0161 429 7776
10
RETAIL SOLUTIONS
Avery Dennison System 1000 Fastening System
10000-4 Avery Dennison
System 1000 Tool
Fasteners
012025 MK11 Needle
10332-0
11mm
Polypropylene
08284-0
22mm
Polypropylene
10334-0
38mm
Polypropylene
• System 1000 features a unique
mechanism that helps to prevent gun
jams and advance paddle fasteners
smoothly to save effort and maximize
productivity.
08285-0
53mm
Polypropylene
10699-0
11mm
Nylon
10698-0
22mm
Nylon
10418-0
26mm
Nylon
•T
ags 1000 garments or items without
reloading which is 20 times more than
ordinary attaching tools.
10415-0
44mm
Nylon
11005-0
51mm
Nylon
• Swiss made
•P
acked in 5’s
Avery Dennison Elastic Stapling System
10790-0 Elastic Staple
Fastening System
10790-0 Avery Dennison
Variable Elastic
Staple Machine
Polyurethane Staples
•N
o sharp edges the elastic staple
variable needle system eliminates
dangerous metal fasteners, twist
ties and cable ties.
roducts stay securely fastened
•P
and look more appealing at
retail allowing customers to see,
feel and try merchandise
11
Call Free on: 0330 123 1950
Fax: 0161 429 7776
10747-0
12mm
Fastener
10741-0
17mm
Fastener
10742-0
28mm
Fastener
10743-0
42mm
Fastener
10752-0
52mm
Fastener
10744-0
61mm
Fastener
RETAIL SOLUTIONS
Q-Clip Fasteners, Fire-a-Tag Loops,
Cable Tie Range & Sample Seals
Q-Clip Clip Fasteners
QC-3 3”
Natural
per 5,000
QC-5 5”
Natural
per 5,000
QC-5B 5”
Black
per 5,000
QC-9 9”
Natural
per 5,000
• Our premium brand loop
• Superior quality
Fire a Tag Loops
FTL-3 3”
Natural
per 5,000
FTL-5 5”
Natural
per 5,000
FTL-9 9”
Natural
per 5,000
•L
oop type may vary according
to availability
Cable Tie Range
Black and colours to order
CT100M
100 X 2.6
Natural
per 1,000
CT140M
140 X 3.6
Natural
per 1,000
CT140MB
140 X 3.6
Black
per 1,000
CT160M
160 X 4.8
Natural
per 1,000
CT200M
200 X 4.8
Natural
per 1,000
CT200MN
200 X 3.6
Natural
per 1,000
CT300
300 X 3.6
Natural
per 1,000
CT304
300 X 4.8
Natural
per 1,000
CT370
370 X 4.8
Natural
per 1,000
CT370MN
370 X 7.6
Natural
per 1,000
430 X 4.8
Natural
per 1,000
11” Knife Edge
CT430
Sample Seals
Call Free on: 0330 123 1950
Fax: 0161 429 7776
BSS-10
Black
Per 100
BSS-12
Red
Per 100
BSS-14
Orange
Per 100
BSS-16
Green
Per 100
BSS-18
White
Per 100
BSS-20
Gold
Per 100
12
RETAIL SOLUTIONS
Fire-A-Tag Hook Attachments
Hook Attachments
• Smooth action
• Good quality
FTH25
25mm
Natural
per 5,000
FTH40
40mm
Natural
per 5,000
Display & Insert Hooks
307455 Black
Two Bar Tie Hook
J Hooks
Used with attachment
pages 6-10 for
product display.
307020 Black
Scarf Hook
041004W
White
per 5,000
041004B
Black
per 5,000
307014 White
Scarf Hook
Per 1000
Per 1000
307004 Black
Scarf Hanger
307020
Scarf Loops
Per 1000
130mm x 125mm
Per 1000
307412 White
Euro Slide On
Hook
Per 1000
SCF01
Scarf Hanger
307028 Two Bar
Scarf Ring
Per 1000
OSH3021
Sock Hanger
Per 1000
307409 Black
Slide on Hook
OSH3010
Sock Hanger
Per 1000
307403 White
Slide on Hook
Per 1000
13
Call Free on: 0330 123 1950
Per 1000
Fax: 0161 429 7776
Per 1000
Per 1000
RETAIL SOLUTIONS
Garment Clips, Hanger Connectors & Set Seals
304-057 Standard
Black Trouser Clip
Garment Clips
c
e
d
b
a
a. 304-106
Smooth Grip
per 1,000
b. 304-122
Large Shirt Clip
per 1,000
c. 304-009
Standard Trouser
per 1,000
d. 304-207
Tie Backs
per 1,000
e. 304-072
Shoulder Pad Clips
per 1,000
AR31 10cm Hanger
Connector Black or
White
Hanger Connector
Natural
MC15
307094 Mini Swivel
Peg Hook Clear
per 5,000
Per 1000
307030 Clear
Display Hook
MC07 Clip Hooks
Per 1000
Per 1000
F08 Scarf Clip
MC03 Millclips
Per 3000
Security Set Seals
Per 3000
Per 1000
11” Knife
Edge
SR31 Transport
Security Seals
21RSS
Red*
21cm
per 500
10RSS
Red
10cm
per 1,000
Per 1000
GHK1 Metal Hanger
MC11 Peg Hook
•F
or scarves and hats
* Sometimes Yellow
SR31-106
SR31-164
SR31-218
106mm
164mm
218mm
Per 1000
Per 1000
Per 1000
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Per 50
•P
opular for header
cards and other
transparent
packaging
Per 1000
14
RETAIL SOLUTIONS
Examiners Dots, Number Dots, Circular Labels Fault Arrows
& Label Applicators
12mm Self Adhesive Dots
Available in each colour.
Per 5000 (also done in
19 & 25mm)
001001
001005
001006
001002
001003
001004
001007
001009
001021
Examiners Dots and Number Dots
Bespoke Labels
Bespoke, circular,
square and rectangular
labels to order only
AP65-30 Towa
Label Applicator
001028 Warning
Labels 3” X 2”
022-001
1 ¾” X ¾”
per 2,500
022-002
12mm
per 5,000
In 30, 65
& 100mm
Rolls 1,000
1LXAPP1
Label Applicator
15
Call Free on: 0330 123 1950
Fax: 0161 429 7776
E
E
E
E
E
E
E
1919
To order only
Fault Arrows
MI N E
XA
R
66
MI N E
XA
MI N E
XA
R
MI N E
XA
R
MI N E
XA
MI N E
XA
1919
R
3131
MI N E
XA
66
R
2020
MI N E
XA
R
3131
R
2020
R
To order only
STOCK PRODUCTS
E
12mm black on white (or black on clear) circular labels,
from 1 - 30. Per 5000
Powerlynx Label
Applicator LD70
RETAIL SOLUTIONS
Packaging Labels
Supplied In Quantities of 1000
Cleartab Circular Labels
DT22EM 22mm DUOTAB
Available in permanent and
removable adhesives in
19, 25, 30, 38 and 51mm
diameters
VL108AR 108 x 79mm
Arrows Underlined
VL108FD 108 x 79mm
Fragile Keep Dry
VL108FS 108 x 79mm
Fragile Do Not Stack
VL108FH 108 x 79mm
Fragile Handle
With Care
VL108HA 108 x 79mm
Handle With Care
VL108ST 108 x 79mm
Do Not Stack
VL108TH 108 x 79mm
This Way Up
VL148HA 148 x 50mm
Handle With Care
VL148TH 148 x 50mm
This Way Up
VL148CR 148 x 50mm
Do Not Crush
VL148FR 148 x 50mm
Fragile
VL8900 89 x 32mm
Docs Enclosed
11” Knife Edge
VL89DB 89 x 32mm
Do Not Bend
VL89FR 89 x 32mm
Fragile
Call Free on: 0330 123 1950
VL89UR 89 x 32mm
Urgent
Fax: 0161 429 7776
VL89HA 89 x 32mm
Handle With Care
16
RETAIL SOLUTIONS
Laserite Multipurpose Self Adhesive Labels
LRL1 199.6x289.1 mm
1 per sheet
LRL4 210 x 297mm
4 per sheet
LRL10 99.1 x 57mm
10 per sheet
LRL16 99.1 x 34mm
16 per sheet
LRL24 63.5 x 33.9mm
24 per sheet
17
LRB2 210 x 148.5mm
2 per sheet
LRL6 99.1 x 93.1mm
6 per sheet
LRL2 199.6 x 143.5mm
LRB4 105 x 148.5mm
2 per sheet
4 per sheet
LRB8 105 x 74mm
8 per sheet
LRL12 63.5 x 72mm
12 per sheet
LRL14 99.1 x 38.1mm
14 per sheet
LRL18 63.5 x 46.6mm
LRL21 63.5 x 38.1mm
18 per sheet
21 per sheet
LRL30 64 x 28mm
30 per sheet
Call Free on: 0330 123 1950
500 SHEETS
PER BOX
LRL8 99.1 x 67.7mm
8 per sheet
LRB16 105 X 37mm
16 per sheet
LRB24 70 x 37mm
24 per sheet
LRL65 38.1 x 21.2mm
65 per sheet
Fax: 0161 429 7776
Compatable with
copiers inkjet & laser
RETAIL SOLUTIONS
Strung & Unstrung Tickets
Supatag Manilla Reinforced Strung Tags
White Strung Tickets
037000 E001
21 x 6mm
per 1000
037020
54 x 28mm
per 1000
037001 E21
24 x 15mm
per 1000
037021
70 x 35mm
per 1000
037002 E22
27 x 18mm
per 1000
037022
82 x 41mm
per 1000
037003 E23
32 x 22mm
per 1000
037023
96 x 48mm
per 1000
037004 E24
37 x 24mm
per 1000
037024
108 x 54mm
per 1000
037005 E25
42 x 27mm
per 1000
46 x 30mm
per 1000
037025
120 x 60mm
per 1000
037007 E26
037026
134 x 67mm
per 1000
037006 E27
54 x 35mm
per 1000
037008 E31
80 x 50mm
per 1000
5MSCL 120 x 60mm White
C23 32 x 22mm
Green & C25
42 x 27mm
C23 32 x 22mm
Red & C25
42 x 27mm
C23 32 x 22mm
Yellow & C25
42 x 27mm
C23 32 x 22mm
Blue & C25
42 x 27mm
PSC9 Blue
39 x 61mm
PSC9 Yellow
39 x 61mm
PSC9 Green
39 x 61mm
PSC9 White
39 x 61mm
5MSCL 120 x 60mm Red
5MSCL 120 x 60mm Blue
5MSCL 120 x 60mm Green
No. No. No. Style Style Style Size Size Size Price Price Price No. No. No. Style Style Style Size Size Size Price Price Price 11” Knife Edge
SWN1 75 x 50mm
SOT1 75 x 50mm
RFT1 75 x 50mm
5MSCL 120 x 60mm Pink
Call Free on: 0330 123 1950
Fax: 0161 429 7776
18
RETAIL SOLUTIONS
Hang Tabs
S-T20 Flexitab Stax
C-78 24 Sheet 1 ½” x 1 ¾”
C-75 24 Sheet 1 ½” x 1 ¾”
Slot Hang Tab
C-T20 2” x 2” Flexible Hang Tab
C-T21 2”x 2” Flexible Hang Tab
R-16 1 ¾” x 1.875” Slot Hang Tab
Grip Seal Bags, Fitting Room Discs, Rail & Warehouse Dividers.
CMD1 Money
Detector Pen
Grip Seal Bags
Fitting Room Discs
GP1
1 ½” x 2 ½”
per 1000
GP2
2” x 9”
per 1000
No. 2
309815
Yellow
GP3
2 ¼” x 2 ¼”
per 1000
No. 3
309812
Green
GP4
2 ¼” x 3”
per 1000
No. 4
309824
Red
GP5
3 x 3 ¼”
per 1000
GP6
3.5” x 4.5”
per 1000
GP7
4” x 5.5”
per 1000
GP8
4 ½” x 4 ½”
per 1000
GP9
5” x 7 ½”
per 1000
GP10
5 ½” x 5 ½”
per 1000
GP11
GP12
6” x 9”
7 ½” x 7 ½”
No. 1
Each
041008 Warehouse
Dividers
Also available in black
per 1000
per 1000
Per 50
307099 Rubber Grips
309806
Blue
Per 50
041007 Plain
Rail Dividers
041007RD
Black
041008RD
Red
041009RD
Yellow
041010RD
Green
041011RD
Blue
041012RD
White
Per 50
307-110 Kick Steps
Colours Vary
Per 1000
307120
Clothes Brush
307115 Lint Remover
Each
19
Call Free on: 0330 123 1950
Each
Fax: 0161 429 7776
Each
RETAIL SOLUTIONS
Labelling Guns & Labels
Other types of guns and labels available on request
Lynx C-P6 One Line Gun
With One 6 Bands For
Narrow Labels
Lynx Lynxlite 21 x 12 One
Line Gun With 6 Bands
Lynx C220 Two Line Gun
For U-Cut Labels
Puma P-JH6 6 Line Gun
For Punch Hole Labels
Lynx C-A17 Two Line Gun 10+7
With Alpha-Numeric Bands
Lynx C-A20 Two Line 10+10
Alpha Numeric Bands
CT1
21mm x 12mm
Per 50000
CT1 Printed
21mm x 12mm
CT4
26mm x 12mm
Per 10000
CT8
22mm x 16mm
Per 45000
CT9
32mm x 19mm
CT5
22mm x 12mm
Per 54000
PB220 SATO
23mm x 16mm
CT7
26mm x 16mm
Per 30000
CT10
29mm x 28mm
11” Knife Edge
Per 24000
Per 43200
CT7 ‘Use By’
26mm x 16mm
Per 30000
Per 50000
CT7 Reduced was/now
26mm x 16mm
Per 30000
Call Free on: 0330 123 1950
Per 21000
CT4 ‘Use By’
26mm x 12mm
Per 45000
Fax: 0161 429 7776
CT7 Best Before
26mm x 16mm
Per 30000
20
RETAIL SOLUTIONS
Size Cube Ranges
073006
073008
073010
073012
073014
073016
073018
073020
073022
073024
073006xs
073001S
073002M
073003L
073004XL
073005XXL
071089
071090
071091
071110
071100
071101
071126
071102
071103
071104
071099
071006
071008
071010
071012
071014
071015
071016
071017
071018
071020
071022
071024
071026
071028
071029
071030
071031
071032
071033
071034
071036
071038
071040
071042
071044
071046
071048
071050
071052
071054
071056
071067
071071
071070
071081
071068
071082
071088
071086
071072
071073
071074
071075
071076
071077
071078
071079
071080
072099
071084
071083
Size Cubes:Supplied in packs of 50
21
Call Free on: 0330 123 1950
Fax: 0161 429 7776
RETAIL SOLUTIONS
Size Cube Ranges
074103
074104
074105
074106
074107
074108
074109
074110
074111
074112
074113
074114
074115
074116
074123
074117
074118
074119
074120
074121
074122
074124
074125
074126
074127
074128
074129
074130
074131
074132
071092
071093
071094
071095
071096
071097
071098
71130
071116
071117
071118
071119
071129
071121
071122
071124
071125
071123
11” Knife Edge
Womenswear Size Cubes:-
Unisex Size Cubes:-
• Available in White or Black
• Also available in Gold on Black, Silver on Black
• Supplied in packs of 50
• Available in White or Black
• Also available in Gold on Black and Silver on Black
• Supplied in packs of 50
Menswear Size Cubes:• Available in White or Black
• Supplied in Packs of 50
Call Free on: 0330 123 1950
Fax: 0161 429 7776
22
RETAIL SOLUTIONS
Sign Holders, Poster Grippers, Thread & Card Holders
Landscape Straight
Sign Holder
Straight Sign
Holder Portrait
Portrait Angled
Budget Sign Holder
Portrait Straight
Sign Holder
A4
041025
A4
041025U
A4
041011U
A5
041023
A5
041023U
A5
041028
1/3 A4
041024
1/3 A4
041027
Per 100
A4
041011
Per 100
Per 100
fmn00251 200m Nylon Monofilament
Display Thread
041015 Ad-Grip Poster Gripper
Per 100
Black
Per 200 metres
Clear
Garment Rails
Hanger Stackers
040050 36”
040054
Metal Stacker
040051 48”
040052 60”
040055
Metal Hanger Stacker
040053 72”
23
Per 100
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Packaging
SOLUTIONS
Packaging Tapes............................................. 25
Carton Sealers, .............................................. 26 - 27
Desk Top Dispensers
Documents Enclosed .................................... 28
Envelopes, Fastfil, Tourer Mailers
Megastretch, E-Stretch,................................. 29
Film Dispensers
Black Refuse Sacks, ..................................... 30
Polythene Bags, Rolls, Dispensers
Padded Envelopes......................................... 31
Stapling.......................................................... 32
Knives, Blades................................................ 33 - 39
PACKAGING SOLUTIONS
E Tape 50mm x 150m
Standard Printed Tapes
ETD
E-Tape dispenser
ETB
Buff E-Tape 2
ETC
ETB52
ETC52
061003
Security Seal Tape
48 x 66
Solvent
061007
Glass Handle With Care
48 x 66
Clear E-Tape 2
Solvent
061009
QC Inspected
48 x 66
Buff e-tape 52
heavy duty acrylic
061010
QC Accepted
48 x 66
Clear e-tape 52
heavy duty acrylic
061011
QC Rejected
48 x 66
ETB-PLUS
Buff e-tape
plus acrylic
061013
Caution
48 x 66
ETC-PLUS
Clear e-tape
plus acrylic
061018
Quarantine
48 x 66
ETS
Security printed
red on white
061020
Reject
48 x 66
ETF
Fragile printed
red on white
061024
Checked
48 x 66
061002
Fragile Tape
48 x 66
Denva Tape Ranges
061038
12 x 66
Clear
061058
19 x 66
Clear
061006
25 x 66
Clear
061028
48 x 66
Buff
061029
48 x 66
Clear
061022
48 x 132
Buff
061026
48 x 132
Clear
Maxtape Masking & Brown Paper Tape
25
Call Free on: 0330 123 1950
Fax: 0161 429 7776
061057
12 x 50
Masking tape
061001
19 x 50
Masking tape
061015
25 x 50
Masking tape
061017
50 x 50
Masking tape
061060
24 x 50
Paper tape
061061
36 x 50
Paper tape
061062
48 x 50
Paper tape
PACKAGING SOLUTIONS
Carton Sealers
PD717 Economy 50mm
PG50B Pro Series 50mm
• 50mm Economy tape dispenser
with metal frame and brake.
Carton Sealers 50 & 75mm
• Heavy duty premium carton sealer
• Adjustable brake
•7
5mm Core
• Standard Pistol Grip Carton
HPG50B
50mm
HPG75B
75mm
• Sealer for 50mm (2") width tapes
• 75mm (3") core, with adjustable
brake, safety blade cap, static grip
and double edged blade
HHPG50B Extra Heavy
Duty 50mm
• Heavy duty premium pistol grip
carton sealer
PG100B 100mm
PG75B 75mm
• Economy dispenser
• For 75mm wide tape
• For 50mm wide tape
•S
tandard 100mm
pistol grip carton sealer
• Italian made
or 100mm width tape
•F
with 75mm core.
• Adjustable brake
PGDSD 25 & 50mm Pistol Grip
Double Sided Dispenser
PD931 25mm Pistol Grip
Double Sided Tissue &
Dispenser Tape
PD932 50mm Double Sided
Tape Dispenser
PD918 Double Sided Transfer
Tape Dispenser
• 12/19mm double
sided transfer
tape sealer
•2
5mm pistol grip
double sided tissue
and polypropylene
tape sealer
• 50mm pistol grip
double sided tissue
and polypropylene
tape dispenser
or 50mm rolls on
•F
75mm cores
• For 50mm rolls on
75mm cores
Call Free on: 0330 123 1950
Fax: 0161 429 7776
• For 33 metre
rolls on 25mm
diameter cores
26
PACKAGING SOLUTIONS
Desk Top Dispensers
PD326 25mm Dual Core
• 25mm dual core economy dispenser
• In plastic for 33 metre tapes on a
75mm core
PD351P Bench Tape Dispenser
• 3 x 25mm or 1 x 75mm
• 66 metre on 75mm core
PD331P HD Metal
Bench Dispenser
BN9 Metal Dispenser
for 9 & 12mm Tape
• 25mm Heavy duty bench dispenser
• Uses 9mm or 12mm tape
• For 66 metre rolls on a 75mm core
CBD50 50mm Clamp
on Bench Dispenser
BTD25 25mm Heavy Duty for
1 x 25 on 25 or 75mm Core
• 50mm clamp on bench dispenser
• For 1 x 25 width tape on 75mm core
• For 1 x 50mm or 2 x 25mm rolls
with 75mm cores
• Comes with
bench fixing
clamp
BD50 50mm Tape Dispenser
on 75mm cores
• Can be clamped to bench
HMB50 Heavy Duty Metal
Tape Dispenser
• Heavy duty metal bench tape
dispenser
on 75mm cores
PD222T 9 & 12mm Bag
Neck Sealer
EPEPS80 Gummed and
Paper Tape Dispenser
• 9 or 12mm bag neck sealer
• Manual tare and pull dispenser
• Made of metal with 7mm throat
• Max width 80mm rolls
• Not suitable for
reinforced
paper tape
Call Free on: 0330 123 1950
• 25mm bench dispenser
• For 25mm width rolls on
75mm cores
PACKER 3S Gummed Paper
Tape Dispenser
• Excellent for low
volume use with non reinforced,
water activated tapes
• Unique peel off provides
uniform tension to aid in tape
moistening and ease of operation
Uses 9 or 12mm tape
27
B2 PD 327 For 25mm Width
on 25 & 75mm Cores
Fax: 0161 429 7776
PACKAGING SOLUTIONS
Affix Document Envelopes
Documents Enclosed Envelopes
• Easy entry / open slot for inserting documents
• Easy peel release liner – strong permanent adhesive bond
• Window panel for clear identification
• Shower proof document protection
• Custom printing option
042001
Printed Documents A4 Enclosed Envelopes
042001A4PL
Plain Documents A4 Enclosed Envelopes
042002A5
Printed Documents A5 Enclosed envelopes
042002A5PL
042003A6
Printed Documents A6 Enclosed Envelopes
042003A6PL
042004A7PL
Plain Documents A7 Printed Envelopes
Fastfil & Biofil
• Fast flowing
• Save on waste
• Reusable
• Biofil is 100%
antistatic,
biogradable
and conforms
to en-13432
• S shape, the
proven interlocking
characteristic inhibits
product migrating
in a box
Tourer Blue Branded Opaque Polythene Mailers
CODE 1
229 x 318 + 50mm lip thickness 55mu per 1000 pms229
CODE 2
CODE 3
CODE 4
CODE 5
CODE 6
Call Free on: 0330 123 1950
Fax: 0161 429 7776
28
PACKAGING SOLUTIONS
Megastretch Cast Film
• Specific grades for all applications
417s
400mm x 300m
• Bondmark TM accredited
427s
400mm x 300m
super strength
• Standard widths 400mm and 500mm
427x
400mm x 300m
super strength extended core
• Standard and extended core for manual applications
547b
500mm x 250m
super strength black
547s
500mm x 250m
super strength
• Available as black security film
heavy duty stretch
E-Stretch
• Unique high performance film formula
• Double length 600 metre roll
• Faster wrapping-extra wide 450mm roll
• One side cling
• 50% Film usage saving available
• Unique reinforced edging
29
061030
400x600mm Standard Core Hyper E Stretch
061037
400x600mm Extended Core Hyper E Stretch
061090
400x600mm Standard Core Black Hyper E Stretch
SR80 Pallet
Film Dispenser
BWR4050
Bow Wrap Dispenser
•400mm / 500mm
stretch wrap on 38/50
or 75mm cores
•Suitable for 400 / 500
stretch film and 38
or 50mm cores
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Craste 77.0.000 Safety Knife
• Ideal for cutting film
PACKAGING SOLUTIONS
Black Refuse Sacks
061082
18 x 29 x 34” 27mu
per 200 LLDPE
061083
18 x 29 x 34” 30mu
per 200 LLDPE
061084
18 x 29 x 39” 25mu
per 200 LLDPE
061085
18 x 29 x 39” 27mu
per 200 LLDPE
Other sizes and guages on request
Polythene Bags
Poly Rolls
Technopress Plastic Bagging Machine.
• Available in manual and pneumatic and are
completely ecological and do not produce
any smoke.
• The roller can be installed on both the top or
lower positions.
•B
oth machines can be installed on the wall
or on a stand.
• TD-600-ECO, 600w, 200v Air Pressure
• TD-600-H-ECO, 600w, 200v, 64m
20/24"x36"
80 gauge 480 covers per roll
20/24"x48"
20/24"x54"
20/24"x60"
Polythene Bags
061070
18" x 24" x 90g
061071
18" x 24" x 120g
per 1000
per 1000
061072
20" x 30" x 120g
per 1000
061073
10" x 12" x 100g
per 1000
061061
8" x 12" x 90g
per 1000
Call Free on: 0330 123 1950
Other sizes on request
Fax: 0161 429 7776
REDIPERF also available
30
PACKAGING SOLUTIONS
Airsafe & Envosafe
Airsafe – a product you can trust, 1000’s of air pockets
encapsulated in a high performance polythene film
barrier, provides excellent cushioning for products which
are fragile and need protecting.
061025
500mm x 100m
small bubble
061033
750mm x 100m
small bubble
061034
500mm x 50m
large bubble
061035
750mm x 50m
large bubble
061036
1500mm x 50mm
large bubble
061042
500mm x 100m
small bubble
061043
1500mm x 100m
small bubble
Envosafe Mailers
This bubble lined mailing bag range provides
a clean effective, lightweight solution for
mailing products that must arrive in prestine
condition
Product Features:
• Available in white and gold
• Peelable adhesive self seal strip
• Bubble lined for maximum protection of
fragile items
• Lightweight - reduces postage costs
• Economical and effective
• Custom printing services to enhance your
company image
Secure Features
31
ENV000
90mm x 145mm
per 200
ENV00
115mm x 195mm
per 200
ENVO
140mm x 195mm
per 100
ENV1
170mm x 245mm
per 100
env2
205mm x 260mm
per 100
env3
f/6/3
per 100
env4
240mm x 320mm
per 100
env5
260mm x 345mm
per 100
env6
290mm x 445mm
per 50
env7
340mm x 445mm
per 50
Call Free on: 0330 123 1950
Fax: 0161 429 7776
• Heavy duty 115gsm kraft
paper construction
• Heavy duty liner
• Oyster kraft
• Innovative replacement for
conventional padded bags
PACKAGING SOLUTIONS
Staplers for Packaging
Rapid Classic K1 Textile Staple Plier
Rapid K1 Classic Staple Plier
Takes 73 series staples
Rapid R3 Staple Remover
Rapid R31 Heavy Duty Staple Plier
BEA MT A18 Manual Tool
BEA MT A18 Pneumatic Tool
For 35/18
series staples
32 Series Staples
12, 15 & 18mm
For 35/22
series staples
35 Series Staples
12, 15, 18 & 22mm
B560 Bottom Carton Stapler
(B560PN Pneumatic)
For 35
series staples
B561 Closing of Trays, Lids &
Flat Sheets
(F561PN Pneumatic)
For 32
series staples
Call Free on: 0330 123 1950
Fax: 0161 429 7776
32
PACKAGING SOLUTIONS
Snap Off Knives & Blades
029013 9mm Snap Off Knife
029014 9mm Snap Off Blades
029015 18mm Snap Off Knife
AB-50 9mm Olfa
Standard Blade
029016 18mm Snap Off Blades
ABB-50 Olfa Standard
Duty Ultra Sharp
9mm Blade
Olfa 180 Black 9mm
A-1 Olfa 9mm Knife
Olfa A 9mm Multi
Purpose Knife
LBD-50 18mm Olfa
Heavy Duty Blades
H-1 Olfa 25mm Extra Heavy
Duty with Rubber Grip
ML 18mm Heavy
Duty Autolock
LBB-50 18mm Ultra
Sharpe Blades
XH-AL Olfa Autolock
25mm Knife
PL-1 Olfa 18mm Professional
Heavy Duty Cutter
Olfa HB-20 25mm
Blades
Which features a suregrip handle
with ultra sharp black blade
108000 Martor Safe Box
Blade Disposal
33
Call Free on: 0330 123 1950
Sharp Box
029031
1/4 litre
029032
1/2 litre
029033
1 litre
Fax: 0161 429 7776
HBB-5B Olfa 25mm
Extra Heavy Duty Blades
PACKAGING SOLUTIONS
Ceramic Knives, Scalpels & Butchers Knives
029067 Sliced Box Cutters
Q-10 155-29238 Multi Functional Ceramic Tool
Replaceable blade
for deburring and
deflashing of soft
metal and plastic
materials
• Manual or auto retraction
available.
• Includes double sided
ceramic blade
Q-10 155-90084 Multi Functional Ceramic Tool
029068 Mini
Slice Cutter
029070 Slice
Safety Cutter
029069 Slice
Pen Cutter
029071 Slice
Precision Cutter
Swann Morton Products
Swann Morton
No 5A Handle
029060 Swann Morton
No 26 Blade
029063 Swann Morton
No 11 Blade
Swann Morton
Handle No 3
Swann Morton No 10 Blade
029062 Swann Moton
No 10A Blade
Mundial Slicing Knives
Other types available on request
5627050 Slicers Plain
Edge 10" 12" & 14"
ZEVA 4" Industrial
Knife ZEVK14PARBK
ZEVA 10" Industrial
Knife ZEVKI10BUTBK
ZEVA 5500 Butchers
Knife in 10" 12" & 14"
Other types available on request
Call Free on: 0330 123 1950
Fax: 0161 429 7776
34
PACKAGING SOLUTIONS
Fixed, Retractable & Sprung Retractable Knives
029012 Economy
Retractable Knife
010243 Folding Pocket
Safety Knife
029025 Economy Blades
Blades
per 100
• Folding pocket knife
Takes 029025 blades
• Auto retract/springback
• Instant blade change
029002 Stanley Fixed
Blade Knife
211987 Blades For
Springback Knife
010073 Folding Pocket Knife
• Wooden handle
1991 Stanley
Takes all Stanley blades
Per 100
029001 Stanley
Retractable Knife
029010 Stanley Sprung Back
Takes all Stanley blades
029004 Auto Sprung
Retract Knife
1992 Stanley Heavy Duty
Per 100
Uses 211987 blades
029011 Olfa Touch Knife
with Spring Back Action
5192 Stanley Concave
Per 100
Takes 029006 blades
1996 Stanley Hook Blade
029005 Left Handed Auto
Retract Knife
Per 100
Available in 4 colours
Takes 029006 blades
445 Mica Retractable Knife
029003 Stanley Folding Pocket
Knife & 029008 Blade
029006 Auto Retract
Blades per 240
35
Call Free on: 0330 123 1950
Fax: 0161 429 7776
PACKAGING SOLUTIONS
Safety Knives
029027 Box Cutter
029022 Handy Film Cutter
029052 Penguin 900 Series
CZ3 Cruze Knife
029053 Penguin 1000 Series
029007BL Standard
Fish Blades
029007 Standard Fish Knife
with Hook
029080 Polyglide Slitter
029058 Sofiac Blades
Takes 029007BL & 029007HB blades
36040
Martor
Blade
029007L Big Fish Knife
029025 Multi Function Cutter
029007HB
Hook
Blades
Takes 029058 blades
029064 Swan
Safety Knife
95641 Martor
Carpet Knife
029061 Metal
Lanyard
029050 Ring Cutter
029059 Plastic
Lanyard
029020 Split
Ring Cutter
Takes 36040 blades
029054 Carpet Knife
63071 45mm Blade
Uses 63071 blade
Call Free on: 0330 123 1950
Fax: 0161 429 7776
36
PACKAGING SOLUTIONS
Mure & Peyrot Knives
671152 Ferret Knife
691789 Sernin Knife
971000 Cenon Knife
• Safety knife with a retractable blade.
• Easy to change blade
•M
etal reinforcement limiting wear
• Designed to cut packaging straps and
plastic film
•D
isposable safety knife in composite
material
• Adjustable blade in 3 positions 15, 11 & 5mm
• Equipped with a metal tip to tear adhesives
• To cut shrink wrap and strapping
• Blade is lockable when not in use
• Same as Sofiac but with a Zamac handle
•M
etal pins for tearing packaging tapes
731152 Estey Knife
981789 Paulin Knife
381120 Galip Knife
•S
ame as the Ferret without the metal
reinforcement at the front
• Same as Sofiac but with a light
magnesium handle
• Concave blade in premium quality steel
661152 Chartron Knife
1402000 Grepin Knife
401180 Verdon Knife
• Safety knife with concealed blade
•S
ame as Ferret Knife but without metal
reinforcement at front.
ossibility to lock the blade into a safe
•P
position at rest
741152 Deveze Knife
• Safety deburring knife in composite material
• The blade is covered with TIN
•S
afety deburring knife in composite
material to cut flexible plastic
• Designed to cut packing straps and
plastic films
lade is done by through the front by
•B
turning slider
• Metal tip to tear adhesives
• Can be used to strip cables
1342000 Merlot Knife
301180 Lande S Knife
•K
nife 3 in 1
•F
irst multi-purpose knife with an
automatically retractable blade
•S
ame as the ferret but with a 90 degree
shaped cutting guide cut the edges of
boxes and small-diametric cylindrical tubes.
• Adjustable blade in 3 positions
18, 12 & 6mm
841135 Bordeaux Knife
• The blade back-side protection is
released during a cut
• The shape of the knife allows the
tearing of packaging on cardboard
• Throughout these operations the
blade slider is blocked
882000 Jalle Knife
•K
nife with a retractable blade and
safety slider
• Bull nosed blade
• Manual retraction
• Right and left handed users
601000 Canelai
• A non cutting rip makes it easy
to open cardboard
•F
irst real multi-purpose knife
for right and left handed people
•S
afety knife with concealed blade to cut
plastic films and straps
• Ergonomic
• Ambidextrous
• The front blade is made for
cutting plastic films and straps
• The rear one is designed to
cut any time of packaging and
is automatically retractable
Call Free on: 0330 123 1950
• Ergonomic
• Short blade length of 6mm
• Very precise cut
37
• Disposal safety knife with retractable blade
• Efficient
Fax: 0161 429 7776
PACKAGING SOLUTIONS
Snap Off Knives & Blades
621152 Arguin Knife
• Safety knife with retractable blade.
The thumb can be released from the
slider during the cut
991152 Medoc Knife
171253 Pyla Knife
• Safety knife with auto retract blade
• Safety knife with retractable blade
• Block lockable at closed position
• Blade retracts regardless of trigger position
• Plastic blade
1001152 Medocain Knife
1061153 Gemel Knife
• Blades retracts regardless of slider position
• Same as Mascaret but with a front part and
a blade holder in metal
• Safety metal bodied knife for both right and
left handers
631152 Ausonne Knife
1031152 Mascaret Knife
1221153 Lege Knife
• Safety knife with auto retractable blade
made from composite material. The thumb
can be released from slider during cut.
• Safety knife with a trigger and
an automatic retractable blade to
open packages
• Left and right handed users
1331153 Stelin Knife
721400 Castrat Knife
791672 Gironde Knife
821152 Auros Knife
• Left and right hand users
• Automatic retraction system
• Blade change through the front
• Robust disposable
safety knife
• Made in
deflectable plastic
• Stainless steel
blade
• Metal safety knife with retractable blade
• Chemical resistant
• Cuts film and
letters
• Reversible blade
• Safety knife with
retractable blade
1131153 Romain Knife
9526 Blades
• Safety knife with manual retraction
• Designed to cut and modify
cardboard boxes
• High precise cut in case of skidding
• Cutting guide
1736 Blades
• Metal construction covered by a plastic grip
• Integrated blade case
Call Free on: 0330 123 1950
Fax: 0161 429 7776
38
PACKAGING SOLUTIONS
Olfa Safety Knives
sk-4 Auto Retract Knife
SK-5 Auto Retract Safety Knife
• Takes SKB-2, RSKB-2 & HOB-2 blades
• SKB-2, RSKB-2 &
HOB-2 Blades
• Powerful return spring
• Thick steel blade
• Thick stainless steel
blade channel
•B
uilt in metal pick
for a package slitter
and carton tucker
• Ergonomic grip
HOB-2 Safety Hook Blade
SK-6 Olfa Safety Knife
Per 100
ulti step production for superior sharpness
•M
ach blade features two cutting edge
•E
• RSKB-2 Blade
• Features an auto-guard system
• Round tip blade
• Ergonomically designed
handle
• Easy blade changing
RSKB-2 Blade
Per 50
• High quality carbon tool steel
• Superior edge protection
SK-7 Auto Retract Knife
• SKB-7 Blades
mall but
•S
secure grip
SKB-2 Blades
or left and
•F
right hand users
Per 50
• Multi step protection process
• Superior sharpness protection
• SKB-8 Blades
•B
lade automatically retracts after cutting or when it loses
contact with material being cut even if the back slider
is engaged.
ight and left
•R
hand users
urable die-cast head
•D
SKB-7 Safety Blade
Per 50
• Specially honed
• High quality carbon steel
•S
KB-2, RSKB &
HOB-2 Blades
• Thick steel blade
• In built metal pick
for slitting packaging
and carton opening
SKB-8 Blades
Per 50
• Specially honed
• High quality carbon tool steel
ight and left
•R
handed users
39
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING
SOLUTIONS
Thread Clips................................................... 41
Scissors & Shears.......................................... 42 - 61
Rulers & Tape Measures ............................... 62
Cloth Markers ................................................ 63 - 64
Cutting Machines & Parts ............................ 65 - 71
Lay Holding & Design Products .................. 72 - 78
CUTTING SOLUTIONS
Thread Clips
MS1 4" Thread Clips
N5120 4 ½" KAI (Replaceable Blades N5120BL)
(colours may vary)
TC805 4" Gold Thread Clips
N5120BL Blade Set
TZ1300 Thread Burner
F6145 4 ½" Series 6
TZ1301 Replacement Tips
41
TC800 4" Thread Clips
N5125 4 ½" KAI Ergonomic
TC114 Thread Clips & Cap
1930 4 ½" Stirling Thread Clips
73001 4 ½" Teflon Coated for Aramid Fabrics
1931 4 ½" Stirling Curved Thread Clips
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
KAI 3000 & 5000 Ranges
The N5000 series is made for professional use and available in 22 different models to meet each
demand of professionals. The blades are +made of AUS6A stainless steel (1.8 – 3.5 in thickness)
and are hardened up to 56 +/- HRC. The scissors are satin finished and equipped with a tension
screw made of brass for easy re-condtioning.
N3140S 5 ½"/140mm
Embroidery
N3160S 6 1/3"/160mm
Embroidery
N3180S 7"/180mm
Embroidery
N5100B 4"/100mm Bent/Pointed
Blades
N5100C 4"/100mm
Curved Blades
N5130DC 5"/130mm
Double Curved
N5135 5.3"/135mm
Sewing Scissors
N5135C 5.3"/135mm
Curved Blades
N5150MPW 6"/150mm
Multi Purpose Scissors
N5165 6 ½"/165mm
Sewing Scissors
N5165C 6"/165mm
Curved Blades
N5100 4"/100mm
Embroidery
Call Free on: 0330 123 1950
Fax: 0161 429 7776
42
CUTTING SOLUTIONS
KAI N5000 Range of Scissors
N5210 8"/210mm Plain Edge
N5240 9 ½"/240mm Wide Handle Scissors
N5210SE 8"/210mm Serrated Lower Blades
N5250 10"/250mm Dressmaking Shears
MICRO
S
S
R AT I O
FT
HAN
N
FE
EDGE
K
D
AI
KNIF
E
E
F
ER
KNI
AI
L
O
K
EE
LIN
G GO
O
EDGE
D
N5220 8 ½"/220mm Wide Handle
Trimming Shears
N5250SE 10"/250mm Serrated Lower Blades
MICRO
N5220C 8 ½"/220mm Curved Blades
O
K
KNI
AI
N
FT
HAN
N
EDGE
K
D
AI
KNIF
E
EE
LIN
G GO
O
EDGE
D
N5275 11"/275mm Tailors Shears
FE
N5230 9"/230mm Sidebent Trimming Shears
IO
R AT I O
FE
E
F
O
ER
KNI
AI
L
S
S
K
N5275SE 11"/275mm Serrated Lower Blade
EDGE
MICRO
ND
K
AI
KNIF
MICRO
E
K
KNI
AI
K
KNI
AI
FE
FE
L
E
S
HAN
43
K
D
ER
R AT I O
FT
HAN
N
EDGE
EDGE
AI
KNIF
E
O
K
D
AI
KNIF
E
E
EE
EDGE
E
FT
N
L
R AT I O
L
F
O
ER
S
S
D
S
OO
LIN
G GO
O
D
EDGE
Call Free on: 0330 123 1950
F
EE
LIN
G GO
Fax: 0161 429 7776
O
D
EDGE
CUTTING SOLUTIONS
KAI V5000 Range Series
The new V5000 range is made for professional use and available in 5 different models and 2 colour
variations to meet each demand of professionals. The blades are made of nsswr-2 stainless steel and
hardened up to 56 +/- 1 hrc. The scissors are satin finished. The new adjustable tension screw made
of stainless steel ensures perfect tension adjustment and the ergonomic handles made of soft plastic
ensures secure grip. the scissors are supplied with handy blade sheath.
V5135B 5 ½"/135mm Blue
V5135P 5 ½"/135mm Pink
V5165B 6 ½"/165mm Blue
V5165P 6 ½"/165mm Pink
V5210B 8”/210mm Blue
V5210P 8”/210mm Pink
V5230B 9"/230mm Blue
V5230P 9"/230mm Pink
V5250B 10"/250mm Blue
V5250P 10"/250mm Pink
Call Free on: 0330 123 1950
Fax: 0161 429 7776
44
CUTTING SOLUTIONS
KAI N7000 Range of Scissors
N7205 8"/200mm Multi Purpose Shears
45
N7230 9"/230mm Multi Purpose Tailors Shears
N7250SE 10"/250mm Serrated Lower Blade
N7240 9 ½"/240mm Kevlar Scissors
Lower Serrated Blades
N7280SE 11"/280mm Tailors Shears
N7250SL 10"/250mm Slim/Light
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Fiskars Classic Range
The ‘fiskars’ classic oranged handled scissors are recognised worldwide. The ergonomically designed handles give
optimum comfort, balance whilst the stainless steel blades are designed for long lasting sharpness and precision cutting.
208782 (9881) 5 ¼" Needlework
208794 18cm (9874) Serrated Lower Blade
208788 (9807) 4" Embroidery
208798 (9863) 9 ½" /240mm Dresssmaking
208788C (9808) 4" Curved Blades
208813 10½ / 27cm Tailors Shears
208790 (9891) 5 ¼" Hobbycraft
5992 15cm Seam Ripper Scissors
208795 (9859) 6 ¾" Sewing
209921 Softouch 16cm Microtip Scissors
208791 (9853) 8 ½" / 22cm General Purpose
208801 10" Softouch Multipurpose Scissors
Call Free on: 0330 123 1950
Fax: 0161 429 7776
46
CUTTING SOLUTIONS
Fiskars Soft Grip, Amplify & Servocut Scissors
9476 Micro-Tip Big Loops 7"/18cm
7062 6"/15cm Amplify Scissors
• Intricate cutting needs
• Short, ultra sharp blades
for cutting in tight spaces
• Ideal for patchwork
•P
erfect for detailed cuts
through multiple layers
and thick materials
• Ideal for buttonholes
• Microtip blades
• Ergonomic handles
•B
lade floating tang for
transfer of energy to
the torsion bar which
adjusts blade
9154 8 ¼”/21cm Servocut Scissors
9162S 9 ½”/24cm Servocut Scissors
KAI Shozaburo Tailors Shears
N5626 6" / 15cm Rubber Stamping Scissors
S-100 10" / 25cm Tailors Shears
•S
ervocut echnology; force reduction mechanism. 2x more cutting performance
KAI Shozaburo Tailors Shears are made of duplex metal in Japan. The cutting edges are made up of deposition rolled steel HSS
(high speed steel) with a hardness rating of ca.64 HRC
47
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Mundial Rubber Range of Scissors
3767 5 ½"/14cm
Pocket Scissors
3764 6 ½"/16.5cm
Sewing Scissors
3760 8 ½"/21.5cm Dressmaker Scissors
3762 7 ½"/19cm
Multiuse Scissors
3790 9 ½"/24cm Multilayer Scissors
Finny Safecut Range
Kretzer finny safecut craft scissors. Stable blade with safecut-grinding. Cuts paper, board, and textiles but protects the skin.
752015 5"/130mm
752020 8"/200mm
753020 8"/200mm
753225 10"
Call Free on: 0330 123 1950
Fax: 0161 429 7776
48
CUTTING SOLUTIONS
Zipzap Range of Scissors
80213 5"/130mm Embroidery
82018 7"/180mm Household
82413 5"/130mm Craft Scissors
81620 8"/200mm Multi-function
82313 5"/130mm Dressing Scissors
82020 8"/200mm General Purpose
82015 6"/150mm Textile Scissors
82024 9 ½"/240mm Dressmaking
89325 10"/250mm Cutting Out Scissors
Classic German quality for all
applications offering a brilliant
cutting experience. All models
have stainless steel blades and
can cut most types of materials.
49
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Finny Range
Top quality German scissors. a fabulous precise cut every time with super comfort handles.
70213 5"/130mm Pointed Tip
72815 6"/150mm Sturdy Tip
72013 5"/130mm Sewing
72020 8"/200mm Side Bent Trimmers
72015 6"/150mm Sewing Scissors
72024 (73224) 9 ½" 240mm Carpet & Tailors
72018 7" 180mm Sewing Scissors
72025 10"/250mm Side Bent Trimmers
73225 10"/250mm Tailors & Carpet Shears
73225S1.5 10"/250mm Serrated Lower Blade
Call Free on: 0330 123 1950
Fax: 0161 429 7776
50
CUTTING SOLUTIONS
Finny xxxl Heavy Duty Range of Shears
74520 8"/200mm Extra Heavy Duty Shears
75525 9"/230mm Short Heavy Duty Serrated
Blade ‘NEW’
73018 7"/180mm Wire Cutters
We are constantly adding to our
range of products, for full up-to-date
listings please go to:
www.farndons.com
with Short Blades
Extra strong blades & handles for thick pile cutting with splendiferous cutting power
51
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Finny Tex and Finny Texx Range of Aramid Shears
72715 6"/150mm Single Serrate
72915 6"/150mm Double Serrate
74720 8"/200mm EHD Single Serrate
73920 8"/200mm EHD Double Serrate
73720G 8"/200mm Single Serrate Curved Blades
73920G 8"/200mm Double Serrate Curved Blades
Extra strong blades & handles for thick pile cutting with splendiferous cutting power.
Call Free on: 0330 123 1950
Fax: 0161 429 7776
52
CUTTING SOLUTIONS
Stirling Range of Scissors & Shears
A1907 7" & A1908 8" Stirling Trimmers
A7208 8" Extra Sharp Lower Serrate
A9007 7" Stirling Trimmers
A9008 8" Stirling Trimmers
A9010 10" Stirling Trimming Shears
3500T 8" Teflon Coated Shear
Lower Serrated Blade
A9012 12" Stirling Shears
3600T 8" Teflon Coated Shear
A7308 8" Workmasters Shears
3700 10" Teflon Coated Shear
Either Blunt/Blunt as Shown
or Sharp/Sharp
53
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Merze/Horsehead & Wilkinson Range
Horsehead Professional Tailors Shears
Merze Stayset Professional Tailors Shears
A5257 7" / 18cm
A7510 10" / 25cm
Merze Stayset Professional Tailors Shears
A5257 8" / 20cm
A7512 12" / 30cm
4120 12" Wilkinson Tailors Shears
A5257 9" / 23cm
4120 13" Wilkinson Tailors Shears
A5257 10" / 25cm
4141 13½" Wilkinson Tailors Shears
A5257 12" / 30cm
Call Free on: 0330 123 1950
Fax: 0161 429 7776
54
CUTTING SOLUTIONS
Merze Range of Scissors & Shears
Merze Professional Textile Scissors
Merze Serrated Edge Tailors Shears
A3157 7" / 18cm
M5508 8" / 20cm
Merze Professional Textile Scissors
A3157 8" / 20cm
M5510 10" / 25cm
Merze Professional Tailors Shears
A6257 8" / 20cm
M5512 12" / 30cm
Merze Superior Professional Tailors Shears
A6257 10" / 25cm
M6508 8" / 20cm
A6257 12" / 30cm
M65010 10" / 25cm
A3257 RS 8" / 20cm
55
Call Free on: 0330 123 1950
M65012 12" / 30cm
Fax: 0161 429 7776
CUTTING SOLUTIONS
Industrial Range of Scissors & Shears
Sharp / Sharp
Upholsterers Board Scissors
F1111 4"
F1111 5"
F1111 6"
A1686 8"
A1686 9"
Blunt / Sharp Scissors
Blunt/Blunt Scissors
F1133 5"
70620 4"
70620 5"
70620 6"
Blunt / Blunt Scissors
Wide Handle Sewing Scissors
F1159 4"
F1159 5"
F1159 6"
71227 6" Straight
71228 6" Curved Blades
Double Curved Scissors
Mundial Knife Edge Shears
1027 3½"
314PKE 8 8"
No 80 Wasa Double Pointed Curved
High Leverage Straight Trimmers
3½"
272 6"
272 7"
272 8"
Sewing Scissors
F1170 6"
F1170 7"
F1170 8"
Call Free on: 0330 123 1950
Weavers Scissors
10118 7" / 18cm
Short extra pointed blades can cut even
the finest metal
Fax: 0161 429 7776
56
CUTTING SOLUTIONS
Schneiden. Proton, Cutters, Scissors & Shears
Schneiden Premium Shears
Cutters Shears
72998-8 8"
1071/C/7 ¾"
Kevlar, Dyneema, Carbon Fibre,
Glass Fibre & Aramid
Cutters Shears
72998-10 10"
1081/C/8 ½"
Cutters Shears
72998-12 12"
1026/C/8"
Proton Shears
Curved Scissors
1071/S/7.75"
269-0508 5"
Proton Shears
Nurses Scissors
1026/S/8"
507-060 6"
Proton Shears
Dissecting Scissors
453-055BC 5 ½"
1026/S/9"
57
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Left Handed Scissors & Shears
A9008L 8" Sterling
N5210L KAI
A9010L 10" Sterling
N7250L 10" KAI
208792 8 ½" Fiskars General Purpose
6197SEL-8 8" Stirling Lower Serrated Blade
208796 8 ½" Fiskars Serrated Blade
1589-10 10" Stirling
1534-5 5” & 1534-6 6" Sewing Scissors
A7208L-8 Serrated Lower Shear
A7208L - 8"
3700L - 10" Composite Shears
A7210L - 10" Serrated Lower Shear
3700L - 10"
Call Free on: 0330 123 1950
Fax: 0161 429 7776
A7210L - 10"
58
CUTTING SOLUTIONS
Carpet Scissors
1990 7"/180mm & 1990 8"/200mm
Cranked Handle /Curved Blade
123 5"/130mm & 123 6"/150mm
Cranked Handle Staight Blade
1987 7"/180mm & 1987 8"/200mm
Cranked Handle Straight Blades
139 5"/130mm & 139 6"/150mm
Cranked Handle Napping Scissors
1988 7"/180mm & 1988 8"/200mm
Straight Handle Curved Blade
140 6" /150mm Napping Scissors
with Cranked Handle
N5220C 8 ½" Kai Wide Handle
with Curved Blades
3133 8"/200mm Straight Handles with
Straight Blades Lower Serrated Blade
3132 8”/200mm Straight Handles
with Curved Blades Lower Serrated Blade
3131 8”/200mm Curved Handles with Straight
Blades Lower Serrated Blade
3134 8” /200mm Blades Curved for left handed
use Lower Serrated Blade
For further information
or guidance please call
0330 123 1950
59
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Swissors, Embroidery Scissors & Pinking Shears
Swissors
52501 Plain Swissor Blades
52500 10 ½” Swissors
52601 Swissor Serrated Blades
Embroidery Scissors
427 3 ½” & 4” Mundial Curved Blade
1529 4 ½” Embroidery Scissors
1529 5”
1529 6”
Pinking Shears
10313 5” Spiral Curved Bladed Scissors
F1161 7 ½” & F1161 8 ½”
All Metal Pinking Shears
208799 10” Fiskars Pinking Shears
N5350 8”/210Mm KAI
Pinking Shears
Call Free on: 0330 123 1950
Fax: 0161 429 7776
60
CUTTING SOLUTIONS
Holsters & Sharpeners
01-6801 8 ½”/220mm
SS-1 Shear Sharp
01-6802 9”/230mm
SCHEPPACH TIGER 2000S
Scissor Sharpener
01-6803 12”/300mm
9854 Scissor Restorer
208960 Fiskars Sharpener
61
Call Free on: 0800 328 7621
01-6800K KAI Holster
Fax: 0161 429 7776
MODEL 180
Scissor Grinding Machine
CUTTING SOLUTIONS
Tape Measures & Rulers
55063 60”/1.5 Metre Fibreglass
Comparison Tape Measure
026006 120"
Metre Tape Measure
024001 36”/1
Metre Economy Rule
024002 36”/1m Wooden Rule
Johnsons Rulers
Aluminium Rulers
Include metric but cut
off at imperial measures
024015 36” 024016 48”
024017 60” 024018 72”
0240046”/15cm
02400512”/30cm
02400624”/60cm
02400736”/1m
02400848”/1.25m
02400960”/1.5m
02401072”/2m
Powerlock Tape Measures
Closed Case Fibreglass Tape
Adhesive Tape
033523 3m/10ft 033526 8m/26ft
033443 10m/33ft
034296
20m/66feet
Stanley Tape
034297
30m/100 feet
Stanley Tape
026004 20 Yard
026005 20 Metre
Draper Economy Tape Measures
09223 10"/ 3 09224 16’/5
09225 25"/7.5 Metre
Komelon Tape Measures
034132 Stanley
PEC36 3 Metre
PEC59 5 Metre
PEC85 8 Metre
PEC105 10 Metre
30m/100 feet 9.5mm
Stainless Steel Blade
Call Free on: 0330 123 1950
Fax: 0161 429 7776
62
CUTTING SOLUTIONS
Cloth Markers, Tailor’s Chalk, Tailor’s Wax
Hancocks Tailors Chalk
Laypowder
Chalk Pencils Pack of 10
PER 50
017001 White
017001-SQ White Square
017002 Assorted
017003 Yellow
017003-SQ Yellow Square
017004 Red
017005 Blue
017006 Black
017051 No3 White
017055 No3 Blue
017050 No3 Red
017017White
017018 Yellow
017019Red
017020Blue
017021Assorted
017022Black
017023 Fluorescent Green
Tailor’s Wax per 50
Sharpeners
Wax Pencils per 25
017058
Plastic Sharpener
Green Fluorescent
Blue Fluorescent
017007 White Wax
017008 Assorted Wax
017009 Yellow Wax
017010Red
017011Blue
017012Black
017013Natural
017039 Green Flourescent Wax
017040 Blue Flourescent Wax
63
Call Free on: 0330 123 1950
017059
Metal Sharpener
Fax: 0161 429 7776
017026 Yellow
017027White
017028Blue
017029Black
017031Red
017032Assorted
017038Natural
017047 Green Flourescent
CUTTING SOLUTIONS
Chinagraph Pencils, Dalo Textile Markers, Leather Markers,
Vanishing Pens & Chalks
Chinagraph Pencils
Strung Type Per 12
017033 White
017034 Red
017035 Black
017036 Yellow
017037 Blue
Royal Sovereign Chinagraph
Dalo Textile Marker
Per 12 (No String)
017035RSBCBlack
017035SWCHWhite
017036RSYWYellow
017070
Leather Pen Precision Markers
017065 White
017066 Orange
017067 Green
017068 Blue
017053 Schneider Refills Opaque Silver Ink Ballpoint for Leather, Vinyl & Rubber
Vanishing Pens, Chalk, Sublimating & press off Chalk
017024 Vanishing Pen
017025 Super Vanishing Pen
(Supplied In
Packs Of 10)
(Supplied In
Packs Of 10)
017044 Press Off Chalk, Pk 50
017016 Sublimating Chalk
Call Free on: 0330 123 1950
Fax: 0161 429 7776
017030 Eraser Pen
017015 Vanishing Chalk
64
CUTTING SOLUTIONS
Cutting Machines
629X Eastman Blue Streak 11
The machine features a low profile,
polished, streamlined baseplate
is designed to reduce friction and
distortion in the lay, regardless of
the number of plies. Constructed of
superior quality materials to ensure
durability and longevity.
The Eastman 629X Blue Streak
II is available in eight sizes, four
strokes, and a multitude of electrical
specifications.
KM KS-EU Cutter
627X Eastman Brute Cutter
A versatile straight knife with
additional horsepower for heavy-duty
cutting of intricate patterns or straight
lines. This is the most powerful
straight knife cloth cutting machine
manufactured in the world.
With a super efficient and extra
powerful motor, the Eastman 627X
Brute straight knife machine is
designed to cut the toughest fabrics
or an increased number of ply.
KM KS-AUV Cutter
5” & 6”
CD3H Eastman Hot Cloth Drill
The Hot Cloth drill leaves identifiable
marks on loosely woven, or knit
fabrics, where an ordinary drill mark
would not be detected.
The cloth drill fuses tightly woven
synthetic materials, throughout the
lay, thereby eliminating distortion.
CR-100A 100mm Electric Cutter
6”, 8” & 10”
Round knife cloth cutting machine
with 100 mm blade and carbide
tipped bottom blade.
65
KS-EU is the last word for small
size Straight Knife Cloth Cutters.
Combining a fully automatic knife
sharpener and the newest and most
advanced technology,
KS-AU, Straight Knife Cloth Cutting
Machine with Automatic Abrasive
Belts Sharpener,
This machine can ensure the finest
cutting in various styles as well as
cutting for thin piece goods.
It’s suitable for cutting all kinds of
fabrics from thin materials to thick
materials.
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Features: 100mm blade Double
insulated motor. Stationary carbide
counter blade. Built-in blade
sharpener. Clear knife guard. Extra
thin base plate with rollers. Extra thin
knife support bracket.
25mm depth maximum cutting
capacity
CUTTING SOLUTIONS
Cutting Machines
EC-360 Emery Rechargeable
60mm Cutter
CR-8 Batty Rechargeable Cutter
80mm Cutter
1005 Suprena 50mm Cutter
Small 50mm round blade.
Stationary carbide counter blade for
fine cutting.
Built-in one touch automatic blade
sharpener.
Double insulated motor for electrical
protection.
Heavy Duty battery powered
portable rotary cutting machine
with 60mm Octagonal blade.
Suitable for Fabric (approx 10
lays max ) Leather (4.8mm max),
Rubber (4.8mm max), Lino (4.8mm
max), Cardboard (4.8mm max),
Carpet and foam (13mm max).
Hand held battery operated cloth
cutting machine with large 80mm
round knife blade, carbide tipped
bottom blade and special extra thin
knife standard.
1015A Suprena 50mm Cutter
RS-100 Octa 100mm Cutter
Easy hand grip for better cutting
manoeuvrability.
Can be cut freely up to 8mm
thickness.
Special knives and bases are also
available according to uses of
cutting.
Call Free on: 0330 123 1950
Best used for light to medium weight
fabrics.
Woven and knit fabrics.
PC1062 Suprena 50mm
Air Cutter
Suitable for upholstery, plastic,
fibre glass, leather, canvas, rubber,
quilting & any other thick & heavy
materials.
Powerful mini cutter.
Use for cutting heavy duty
materials such as leather, carpet
and so on.
Micro switch hand lever for easy
operation.
With its advanced technology and
new systems, “OCTA” is a high
performance Small Size Circular
Knife Cutting Machine especially
well-suited for thin fabrics and
precise cuts.
Fax: 0161 429 7776
Light weight for easy handling.
Robust construction to withstand
hard wear
Built-in oiler with one touch
sharpener prevents overheating
even when in continuous use.
66
CUTTING SOLUTIONS
Cutting Machines
Hoog Rapido 50mm
230 Volt / 40 Watts, 50mm blade
diameter, Blade speed 1800rpm,
Cutting height 5mm, Fitted with
an adjustable blade safety guard
Hoog Cutty 50mm
230 Volt / 45 Watts, blade diameter
50mm, blade speed 2950rpm, cutting
height 7mm, fixed with blade safety
guard
Hoog USG-G 110mm
Hoog Z-4-N 110mm
Cuts textiles and synthetic
materials, intergrated
sharpening stone,
high level of safety.
Cuts textiles and synthetic
materials, robust 3 phase
motor for continuous
use, intergrated
grinding stone,
adjustable finger
and fixed safety
guard.
Hoog Favorit 50mm
50mm, blade speed 2800rpm,
cutting height 10mm, fitted with
an adjustable blade safety guard.
Hoog Herkules 60mm
(Super Strong)
cutting height 15mm, fitted with an
adjustable blade safety guard.
Herkules BWD 60mm
HSGM-0 Heat Cutter
Replacement
Blade
Air pressure 6 bar, power 185 watt
pneumatic motor, blade diameter
cutting height 15mm.
67
Call Free on: 0330 123 1950
Heat cuts and seals synthetic fabric,
ropes and belts, small quantities
and short time operation, heat time
6 – 8 seconds.
Fax: 0161 429 7776
Bosch GSG Foam Cutter
8” & 10”
Suitable for upholstery, plastic,
fibre glass, leather, canvas, rubber,
quilting & any other thick & heavy
materials.
Light weight for easy handling.
Robust construction to withstand
hard wear
Built-in oiler with one touch
sharpener prevents overheating
even when in continuous use.
CUTTING SOLUTIONS
Rasor Cutting Machines
Zero 702 Battery 70mm
70mm DIAMETER 4 SIDED BLADE
CUTS UP TO 18mm / 18v/ 400w
DS 503 50mm
Lightweight, low noise, permanent
magnetic motor, low maintenance
costs, 220/240 V 50 – 60 hz, 18mm
cutting capacity.
FP861
86mm Pneumatic Cutter
400W/350w at max pressure,
compressed air, rear exhaust,
cuts 20mm thick, max pressure
6 bar, 8 sided blade
Call Free on: 0330 123 1950
Optima 702 70mm
Electic Round Knife
800rpm / 100W, Cutting Height
15mm, 1150kg, Steel Wormgear
Strong Build Quality
FP 861MT
Pneumatic Cutter 86mm
Cuts textiles and synthetic materials,
robust 3 phase motor for continuous
use, intergrated grinding stone,
adjustable finger and fixed safety guard.
FP 503
50mm Pneumatic Cutter
Heat cuts and seals synthetic fabric,
ropes and belts, small quantities
and short time operation, heat time
6 – 8 seconds.
Fax: 0161 429 7776
SW-12 120mm
Cutting depth 50mm
850 RPM /180 W
SW100 100mm
Cutting depth 35mm,
100mm Diameter 850 RPM, 90 W
D86 86mm
86mm Diameter, 1000rpm,
Cutting Depth 25mm, 90w
68
CUTTING SOLUTIONS
Cutting Machines
For Aramid, Glass Fibre, Carbon Fibre & Kevlar
EC-10 Battery Cutter
EC-10 CH
EC-10 B
We also stock:
Replacement cutter heads.
Other parts are to order.
WBT-100 Battery Cutter
WBT-1D
Battery
WBT-1H
Cutter
Head
We also stock:
Replacement cutter heads.
Other parts are to order.
Elaxa 2000/4000 Battery Operated Cutting Machine
Mofex Electric & Pneumatic Cutting Machines
PNEUMATIC
Foot A
Foot B
SBD
ELECTRIC
SB
Foot C
Other models available upon request
69
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Cutting Machine Parts for Eastman
Eastman Straight Blades
Eastman Straight Blades
COPY CUTTING BLADES
COPY WAVY BLADES
COPY TEFLON BLADES
COPY WAVY TEFLON BLADES
80C6 6”
80C8 8”
80C10 10”
80C11.5 11 ½”
80C13 13”
Eastman Type Blades
• 013001 6” • 013002 8” • 013003 10” • 013004 11 ½”
• 013005 13” • Plus T For Teflon • Plus W for Wavy
• Plus TW for Teflon Wavy
Eastman Type Bands
81C1-2 Slot Cleaner
664C1 Connecting Rod
24C1-3 Knife Bolt Lock
60C1-56 Throat Plate
Knife Slide
529C1 Wrench Knife Bolt
209C1 Neoprene Band
619C1-32 Roller
619C1-31 Roller Shell
378202 Curly Cable
523C1-100 Male Plug
508C1-100 Terminal Block
68C1-192 pressure
foot shoe
79C4-24 Throat Plate
60C1-55, 505C3-223
Small Base Plate
712C1-1 Left Pulley
712C1 Right Pulley
Genuine Eastman Bands
181C2-1 Course
181C2-2
Medium
181C2-5
Fine
181C25g Fine
181C22g Medium
181C21g Course
181C26g Rough
Most parts are available in genuine and copy
Call Free on: 0330 123 1950
Fax: 0161 429 7776
70
CUTTING SOLUTIONS
Cutting Machine Blades
Bosch Foam Cutter Blades
Bosch Blade Guide
(Please State Size)
(Please State Size)
M702 Circular Suprena
M688Z Suprena
Sharpening Stone
RO740 8 Bow Batty
503E EXT Rasor 50mm
M700 6 Bow Suprena
EC360 10 Bow Blade
503EHSS 50mm Rasor
70SHSS 70mm Rasor
M703 8 Bow Suprena
10CEXTG 100mm Rasor
HSS 70mm Rasor
86THSS Rasor Blade
70D
4 B0W Blade 110mm
Circular Blade 110mm
Miniroller
& Hoog
70E
R0741 6 Bow Batty
R0742 Circular Batty
Miniroller
& Hoog
Most parts are available in genuine and copy
71
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Pin Ranges
Hardened & Tempered Pins
Glass Head Pins (Assorted boxes)
63111
26mm X 0.65mm 500gram
66044
26mm x 0.80mm
per 1000 Pins
63031
63051
63131
62921
66116
30mm x 0.60mm
per 1000 Pins
66117
30mm x 0.60mm
per 10000 Pins
62851
Mild Steel Pins (Nickel)
Coloured Head Pins (Assorted Stainless)
60781
65661
32mm x 0.59mm
PER 1000 Pins
60801
32mm x 0.75mm 500 gram
60811
26mm x 0.85mm 500gram
60881
38mm x 1.05mm 500gram
60911
65721
32mm x 0.59mm
PER 2000 Pins
65883
32mm x 0.59mm
PER 10000 Pins
66707
34mm x 0.65mm
PER 1000 Pins
Dipped Head Stainless Steel Pins
Safety Pins
W36041
26mm X 0.63mm
383gram (5000 PINS)
Countess Mild Steel
W36081
26mm X 0.59mm
305gram (5000 PINS)
53021 19mm SIZE 000 PER 10 gross
Kilt / Blanket
55301 64mm SIZE 7 1 gross
Call Free on: 0330 123 1950
Fax: 0161 429 7776
72
CUTTING SOLUTIONS
Cutting & Pattern Papers
Tissue, Underlay, Spotmark, Heatseal & Multimark
Kraft Paper & Plastic Sheets
A
B
C
A
D
B
E
C
(A) Heatseal
095001 60” x 250m
(B) Underlay
108036 36” x 100m
108048 48” x 100m
108060 60” x 100m
108066 65” x 100m
108072 72” x 100m
(C) Multimark
106060 60” x 250m
(D) Papers and Tissue
110060 60” x 205m
Interleaving Tissue
(E) Spotmark
100036 36” x 150m
100048 48” x 150m
100060 60” x 150m
100065 65” x 150m
100072 72” x 150m
143063 40”
(A) Brown Kraft Paper
019020 26” X 54“ (B) White Sheet
019023 26” X 54“(C) Yellow Sheet
Please Note:
Blue and Red are obsolete.
Pattern Card
Pattern Board
A
A
B
C
B
019018 40” x 70m (A) Economy Buff (270gsm)
019001 40” x 100m (A) Medium Buff (310gsm)
019008 40” x 75m
(A) Heavy Buff (425gsm)
019025 39” x 54” x 0.8mm (A) Vulcanized Fibre Board
019028 42” x 64” x 1.2mm (B) Grey Heel Board
143062 46” x 45” x 1.00mm (C) Fibrex Board
143061 60” x 100m (A) Medium Buff (310gsm)
019003 40” x 100m (B) Coloured (310gsm)
73
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Olfa Rotary Products
63031 (RTY-1/G) 28mm Cutter
63081 RTY-2/DX 45mm Cutter
63091 RTY-3/DX 60mm Cutter
63411 23”x 70”
63401 12”x 18”
63331 30cm x 30cm (RM-30)
62281 24”x 18” (RM-12S)
63341 RM-17S 17” Rotating Mat
63351 70”x 35” Cutting Mat
63391 36”x 24” (RM-MG)
RB28-2 28mm Blade
RB45-1 45mm Blade
RB60-1 60mm Blade
Other mats available on request
Call Free on: 0330 123 1950
Fax: 0161 429 7776
74
CUTTING SOLUTIONS
Kai Rotary Products
N5028 28mm Cutter
N5045 45mm Cutter
RS-45 45mm Cutter
Cutting Mats
CB-01 600mm x 900mm
CB-02 450mm x 600mm
CB-03 150mm x 460mm
CB-143 600mm x 1430mm
CB-200 1000mm x 2000mm
N5028BL 28mm Blade
75
N5045BL 45mm Blade
Call Free on: 0330 123 1950
N5045PBL 45mm Blade
Fax: 0161 429 7776
N5045WBL 45mm Blade
CUTTING SOLUTIONS
Gloves
Chain Mail Extensions
Full Arm Protection
016001XXS Mesh
016002 XS Mesh
016006 Xl Mesh
(Available on request)
016003 Small Mesh
016004 Medium Mesh
016005 Large Mesh
016010 Rigger
016021 Hide
016012 Heavy Duty Hide
016008 Criss Cross
016011 Cotton
016007 X5 Latex Faced
016022 Latex Faced
PCN
016023 Cut Resistant
016025 Kutlass NFX
Cut Level 5 Glove
016024 kutlass NF 500
Cut Level 5 Glove
016013 SIZE 7
016014 SIZE 8
016015 SIZE 9
016016 SIZE 10
016017 SIZE 11
Call Free on: 0330 123 1950
Fax: 0161 429 7776
76
CUTTING SOLUTIONS
Pattern & Design Accessories
018002 Pattern Hookettes
018003 Giant Hooks
021021 Pattern Punch
021022 Pattern Shears
021001 Pattern Notchers
021015 Tracing Wheel
021006 60cm x 35cm
‘L’ Square
021017 Pattern Drill
021003 Varyform Curve
021018 3mm Drill Bit
021004 Flexicurve
40cm/15 ¾”
021009 Square
60cm / 24”
021023 Linen Tester
021014 Bradawl
021010 French Curves
021002 Quarter Scale
Metric Graders
021011 Patternmaster
6¼" x 4"
77
Call Free on: 0330 123 1950
Fax: 0161 429 7776
CUTTING SOLUTIONS
Lay Holding Equipment
025001 Sample Cloth
025004 4" Press Down Clamp
026006 8" Press Down Clamp
025011 Cloth Clamp
025008 8" Pillar Clamp
3¼" Spring with 1¼" Capacity
025007 2½" General Purpose
60mm Jaws
025009 2" Cloth Clamp
014005 Compact Weight
CLOTH WEIGHTS
CLOTH WEIGHTS
014004 18"
014001 18"
014006 27"
014002 27"
014007 36"
014008 48"
014009 60"
Call Free on: 0330 123 1950
Fax: 0161 429 7776
78
CUTTING SOLUTIONS
LIMITED
The professional choice for cutting technical textiles.
79
Call Free on: 0800 328 7621
Fax: 0161 429 7776
MANUFACTURING
SOLUTIONS
Lubricants & Aerosols................................... 81
Cleaning Guns,............................................... 82
Fluids & Sewing Aids
Sewing Machine Accessories....................... 83
Sewing Machine Parts.................................. 84 - 89
Ironing Systems............................................. 90
Press Clothing................................................ 91
Furniture Manufacturing Tools...................... 92 - 102
Pins, Needles & Regulators.......................... 103 - 107
Hog Rings, Pliers & Zip................................. 108
Attachment Products
Stapling.......................................................... 109 - 110
Buttoning, Eyelet........................................... 111
& Ventilator Machinery
Glue Guns & Consumables........................... 112
Dies, Grommets, Ventilators, Washers, ....... 113 - 128
Shells, Pivot Buttons, No dent Nails,
Prongs, Snap Rings, Hooks & Washers
Decorative Nails, ........................................... 113 - 128
Mattress Tufts & Nyloops.............................. 129
Hook & Loop Fastener................................... 130
Furniture Labels............................................. 131
MANUFACTURING SOLUTIONS
Lubricants & Aerosols
011020 400ml
Oil Cans & Oils
028006Plastic Oil Can
51716 125 ml Metal Oil Can
51717 200 ml Metal Oil Can
011002 5 Litre Sewing Machine Oil
011003 25 Litre Sewing Machine Oil
011012 5 Litre Light Knitting Oil
011013 25 Litre Light Knitting Oil
011014 5 Litre Heavy Knitting Oil
011015 25 Litre Heavy Knitting Oil
011023 25 Litre Kerosene
81
400ml
R207 400ml
R210 400ml
R211 400ml
R212 400ml
R213 400ml
R217 400ml
R250 400ml
R251 400ml
R252 400ml
R257 400ml
R260 400ml
R 262 400ml
R 265 400ml
R267 400ml
IS2 400ml
IS6 400ml
IS13 400ml
F400ml
IS20 400ml
011019
400ml
011008
500ml
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Cleaning Guns, Fluid & Sewing Aids
010004 Arrow Cleaning Gun
010001 5 Litre Cleaning Fluid
010004E Economy Cleaning Gun
TEX-25 KrebsTex 25 Spotting Gun
028003 Small Seam Ripper
028007-1 Economy (Twe7)
028017 Threading Wire
028007 Deluxe Curved (Twe6)
028011 Cleaning Iron
40230013 Burling Iron with AWL
028012 Cloth Picker
028033 Open Ended Thimble
028032 Closed Ended Thimble
028002 Large Seam Ripper
40230010 Deluxe Burling Iron
40230015 Large Burling Iron
40230009 Large Burling Iron
028005 Cleaning Brush
Call Free on: 0330 123 1950
Fax: 0161 429 7776
82
Sewing Machine Accessories
028013 5 Machinist Chair
Sealed Beam Bulbs
Sbl12c Halogen Bulb
12 & 9 Volt
12V/20Watt
5 Watt/3 Watt
SNU 21 Gooseneck Light
100463 Knee Lifter Joint
143UT Treadle Rod
259462 Bobbin Winder
Thread Stands
028021Textile Whisks
6.3V/20W & 12V/20Watt
Universal Screw Bulb
15Watt
100032003
52394 Thread
Needle Plate Screws
Take Up Spring
V Belts 25”– 58”
Treadle Chain
WITH
S HOOK
1811090011
IN 2, 3, 4
& 5 Spool
146037001 Knee Lift Cradle
Tension
Assembly
83
120428 Swing Gauge
144502001
Top Pre Tension
Long Air Blow Gun
Servo Motor DC
35478 100mm
59326 250mm
59327 325mm
59328 500mm
Industrial
Electronic
Controlled
20572 Air Blow Gun
5G Finger Guard
Call Free on: 0330 123 1950
1483 Thumb Screw
028001
Tally
Counter
19S Finger Guard
Fax: 0161 429 7776
22 Finger Guard
Presser Feet & Parts
24983 (P35)
T35 T (MT20) Teflon
24983T Bonded
113280 (P351)
Presser Foot
Standard
Hinged Foot
Foot
Complete
Teflon Foot
12435 HN (P36N)
31358 HN (P36LN)
31358HW (P36L)
12435HW (P36)
Left Narrow
Hinged Cording
Foot
Right Narrow
Hinged Cording
Foot
Right Wide
Hinged Cording
Foot
Left Wide
Hinged Cording
Foot
40322SH (P363)
127233 5/8" (P127)
S 518
142058 (P58)
Narrow Cording
Zipper Foot
Extra Wide
Presser Foot
13.6mm
Invisible
2mm Foot
Standard
Zipper
Foot
Left Hand Compensating
Right Hand Compensating
Hemming Foot
1/32" 1/16"
1/8" 3/16"
¼" 5/16"
3/8" ½"
1/32" 1/16"
1/8" 3/16"
¼" 5/16"
3/8" ½"
1/16" 1/8"
3/16" ¼"
3/8"
CL - E
CR - E
36069L(P69L) Right
Hand Piping Foot
36069L(P69L) Left
Hand Piping Foot
1/16"
1/8"
3/16"
1/4"
3/8"
1/16"
1/8"
3/16"
1/4"
3/8"
P69DX Double Piping
1/8"
3/16"
1/4"
S67 Welting Foot
120828H (P50H)
Shirring Foot
L36069H (P69LH)
L36069H (P69RH)
Left Handed
Piping Foot
Right
Handed
Piping
Foot
1/8"
3/16"
1/4"
Teflon Hinged Zipper
MT18 Teflon
Feet
T36 L & R
Zipper Foot
S30 Inside Welting
1/8" 3/16"
1/4"
12142 (P33)
Presser Foot
S30 Outside Welting
B 1524 Closed Toe
Foot ½"
Call Free on: 0330 123 1950
Fax: 0161 429 7776
84
Bobbins, Bobbin Cases & Hooks
40264 Spool
55623A/100376
9033A PFAFF Spool
272152 Spool
PFAFF
Spool
270010 Spool
97949 Spool
2451660A Spool
203470 Spool
264645 Spool
244750 Spool
52237NBL
52237NBLE-Z
BC-DBL-NBL
BC-DB1-NBL17
BCDBZ(1)NBL6
BC-DBZ (1)-NBL6S
BC 251 Bobbin Case
Bobbin Case
BC-DBM (1)
BC 251
S20553001
B18370410A0 JUKI
BC 107 Bobbin Case
HSH7.94A
HSH7.94B
HSH7.94BOH
Rotary Hook
Hook & Base
HSH-7.94BTR
HSH-12-15C Hook
Spool
Case
BC-LK (B2)
HSH7.94BKTR(2)
Rotary
Hook
SA1882001
HTH-BTR Hook
Durkopp
Hook
HG12-152 Hook
Shuttle Box
Assembly
85
Call Free on: 0330 123 1950
27150124
Fax: 0161 429 7776
These are just a small selection
of popular parts. Please state
make, model, class and sub
class of machine of part
number to ensure correct
parts are supplied.
Needle Plates & Feed Dogs
100266101 Plate
HOLE
B18 1.8mm
B20 2.0mm
B22 2.2mm
52032 LG
12482 LGB
18001991
Needle Plate
Needle Plate
52031 Feed Dog
12481 Feed Dog
12432 Slide Plate
111859 Needle Plate
150792 Throat Plate (H26)
143855001 B791
277513 Pegasus
HOLE
E14 1.4mm
E16 1.6mm
E18 1.8mm
E20 2.0mm
E22 2.2mm
150793
Feed Dog 0.6mm
111860 Feed Dog
147335 Feed Dog
S02742 Feed Dog
Slide Plate
Needle Plate
159521001 Feed Dog
147335
Throat Plate
149159 (20159) Feed Dog
20160 LG
Throat Plate
Overlock Needle Plates & Feed Dogs
S13102101 Feed Dog
146501
Throat Plate
146502
Throat Plate
146567 Feed Dog
146568 Feed Dog
146504Throat Plate
146503Throat Plate
S13101001
Throat Plate
B1609-041 Feed Dog
B1109-041
Throat Plate
These are just a small selection of popular parts. Please state make, model, class and sub class of machine or part number to
ensure correct parts are supplied.
Call Free on: 0330 123 1950
Fax: 0161 429 7776
86
Needles, Overlock Accessories & Parts
Groz Beckert Needles
Schmetz Needles
GROUP 1 1738A, 16 X 231 & 134R
GROUP 2 135 X 17 & 175 X 1
GROUP 3 175 X 7
GROUP 4 B27 & B63
GROUP 5 149 X 5
GROUP 6 750
GROUP 7 UY128GAS
GROUP 8 UY147GS
112436 Lower Knife
144074 Upper Knife
148815 Angled Knife
S20579-101 Angled
S20582-001 Lower Knife
277-113 Lower Knife
270-113 Lower Knife
144124 Overlock
Rimoldi
028008 Screwdriver
(STA065006)
2.5mm x 50mm
S20899-001 Lower
Brother Knife
277000 Pegasus
S356N Reece Knives
Rimoldi
202295 Pegasus
270-112 Angled
From ¼” – 1”
Upper Knife
40-0127-1-000
202142-0-01 Angled
Reece Tab Knife
Upper Knife
202194-0-11 Rimoldi
20496 Yamato
Angled Knife
42-0012-0-045 Reece
Yamato
2100167
Upper Knife
87
201121A Pegasus
S20898-101 Brother
Cutter Knife
S20896-101 Angled
Allen Key
20491
30421
Centre Knife
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Loopers & Trimming Knives
147934001 Looper
159884001 Looper
277011 Looper
277015 Lower Looper
Pegasus
Pegasus
S01249 Looper F
277010 Looper
Lower
210357 Looper
B-2521 804 Looper
Pegasus
Juki
S-119 Looper
S03536 Rotary Looper
S01248 Looper
S116N Under Looper
Upper
Reece
S20438 G Looper
B-2118-816 Looper
Juki
410434 Singer Looper
B2521804000 JUKI
Upper
Reece
Lower Looper
210356 Looper
146635 Chainstitch
Looper
SO3629001 Knife
Movable
Pegasus
152906101 Retainer
SO 3627 Movable Knife
Thread
179458 Pegasus Fixed
S10210-2-01 Knife
Fixed
S10205 Movable Knife
159915001 Knife
302808010 Knife
159541001 Knife
Lower
Movable
S02637001 Knife
S02645 KNIFE
Movable
Fixed
152905001 Fixed Knife
152901001 Knife
159540-001 Fixed Knife
Moving
Call Free on: 0330 123 1950
Fax: 0161 429 7776
88
Hemmers, Binders & Folders
A400 Plain Hemmer
A450 Spring Hemmer
1.6, 3.2, 4.8, 6.4, 9.5 & 12.7mm
1.6, 3.2, 4.8 & 6.4mm
A75U Single Upturn Hemmer
A4/100 Hemmer
A75d Single Downturn
A9/508 Hemmer
3.2, 4.0, 4.8, 6.4 & 8.0mm
A10 Right Angled Bias Binder
16,18, 20,
22, 24, 26, 28, 30,
32, 36, 40, 45 & 50mm
A5B Straight Folder
18, 26, 30,
36, 45, 52,
58, 64, & 70mm
Binder Feet For A10
A11 J TYPE Swing Hemmer
A30 Lap Seam Folder
6 , 8, 10,
13, 15, 18, 20
25, 30, 35 & 40mm
A5 Belt & Loop Folder
18, 26, 30, 36,
45, 52, 58, 64
& 70mm
A13 Twin Plain Hemmer
1/8”to 3/16”
1/8” to 1/4”
Hemming & Folding Feet
P34 7mm & 9mm
P38 6mm & 9mm
89
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Ironing Systems
Professional Series Steamer
Ironmaster CE Iron
Brass Base Brevi Tailoring Iron
Heads:
• Metal Steam
• Plastic Steam
• Steam Brush
• Carpet Steam
• Best Seller
• Easy Access to Thermostat
• Snap Action Thermostat
with Intergrated Thermofuse
• Patented Monoblock Sole
Plate In Special Alloy
• 3 or 5Kg
• Heavy Weight
• Italian Produced
Steam Iron & Boiler
Pratika 5 Litre Iron & Boiler
Speed Steam Brush
• 2 Litre Capacity
• Stainless Steel Boiler
• Can be Supplied with Trolley
• Can be Supplied with Trolley
• Stainless Steel Boiler
• Silicon Ironing Mat
• Brass Water Gauge
• Universal with any type
of Steam Generator
• Industrial Use
3.2, 4.0, 4.8, 6.4 & 8.0mm
Stirovap Commercial Series
Ironing System Model 603
Stirovap Model 604 Industrial
Ironing System
• 5 Litre Capacity
• With or Without Pressing Sleeve
• Interchangeable Pressing
Sleeves for Trousers or Jackets
• Automatic Self Contained
Generator
• 800W Heater Element
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Sewmaq Moval
• Ironing Board
• Universal Folding Board
• 2 Litre Stainless Steel Boiler
90
Press & Ironing Board Clothing
KCP Knitted Cotton
Padding
Needle Felt
6mm & 12mm
040004 CAMPTEL PRESSING TROWEL
040005
BLUE TROWEL COVER
040006 WHITE TROWEL COVER
040007 TROWEL FELT
Terylene Covering
Blue Nylon Covering,
Anti Shine Foam &
Needle Felt
040008 SMALL NYLON COVER
71” x 39”
040009 SMALL TERYLENE COVER
71” x 39”
040011 LARGE NYLON COVER
81” x 46”
040014 LARGE TERYLENE COVER
81” x 46”
040020 HOFFMAN HF 59 GAUZE
Teflon Shoe
PTFE Iron Shoes
Without Frame
040021 HOFFMAN HF59 KCP PAD
78” x 39”
040022 HOFFMAN HF59 WOOL FLANNEL
78” x 39”
040026 SMALL CAMPTEL FELT
69” x 37”
040028 LARGE CAMPTEL FELT
78” x 43”
040029 12mm FELT
54" WIDE Per Metre
040100 IRONING BOARD COVER
50” x 18”
040102 IRONING BOARD FELT
50” x 18”
Please
State
Make
of Iron
040103 SMALL GAUZE
69” x 37”
040104 LARGE GAUZE
71” x 39”
040105 KNITTED COTTON PAD
87” x 39”
Hoses & Leads
96” x 36”
040107 GREEN POLYESTER COVER
87” x 39”
040108 GREEN POLYESTER COVER
97” x 39”
040111
ANTI SHINE FOAM
1m x 2m
040112
ROLL ANTI SHINE FOAM
040113
ANTI SHINE FOAM
040116
TERYLENE MIT
040117
PRESSERS GLOVE
040118
HF 59 GREEN COVER WITH EYELETS
040119
HF59 WHITE COVER WITH EYELETS
Flexible Steam Hose 040203
PTFE Steam Hose (to order)
Electric Four Core Lead (to order)
91
Call Free on: 0330 123 1950
25m
2m x 2m
79” x 36”
72” x 36”
040123 GREEN TERYLENE COVER
78” x 48”
040124 WOOLLEN FLANEL
72” x 36”
Fax: 0161 429 7776
Staples Lifter & Extractors
124M (313) Mundial Staple Lifter
124B Berry’s Staple Lifter
763 Osborne Staple Lifter
202 Staple & Tack Claw
121 Tack & Staple Remover
1066 Osborne Staple & Tack Lifter
123 ½ Osborne Claw Tool
201 Staple & Tack Claw
120.5 Staple Lifter
122 Osborne Claw Tool
200 Claw Tool
124-12 12” Staple Lifter
601 / 602 Staple Pliers
600 Staple Puller Plier
787A Side Cutter Staple Remover
601 Antique Nail
602
Staple Plier
Call Free on: 0330 123 1950
Fax: 0161 429 7776
92
Cutting Nippers, Webbing Pliers
93
Osborne 249 Canvas Stretching Plier
Osborne 445-3 Spring Clip Pliers
Osborne 250 Webbing Canvas Plier
Osborne 522 BW Clip Plier
Osborne 251 Canvas Plier
084077 Dynagrip End Cutting Pliers
DB-1 Duck Bill / DB-2 Serrated Edge Plier
Osborne 93 Flushed Cut Pincers
Osborne 94 End Cutting Nipper
6801190 180mm / 6801200 200mm End Cutting Plier
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Wire Cutters
261190 Knipex Wire Cutters
OSBORNE 3377 Diagonal Cutting Nippers
4951/160 Maun Wire Cutters
OSBORNE 719 Osborne Wire Cutter
3010/150 Maun Wire Cutters
Osborne 91 Diagonal Cutting Nippers
Osborne 91 Diagonal Cutting Nippers
49192 460mm
49193 610mm
49194 760mm
49195 910mm
Call Free on: 0330 123 1950
Fax: 0161 429 7776
94
Osborne Tucking Tools, Knives & Other Tools
95
745 Plastic Blade Tucking Tool
Osborne 420 Hawkbill Knife
Osborne 79.5 Sharp Point Knife
746 Flexible Tucking Tool
Osborne 479 Bevel Point Knife
Osborne No 6 Skiving Knife
747 Rigid Tucking Tool
Osborne Seam Ripper 1020
Osborne 323 Mill Knife
Osborne 1021 Sharpening Stone
Osborne 76 Square Point Knife
Osborne Clicking Knife 460
Osborne 72 Safety Sheath
for Osborne Knives
Osborne 81 Curved Shoe Knife
259 Curved / 259S Sharp Blade
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Leather Tools
No 70 Osborne
Round Knife
No 71 Osborne
Head Knife
No 67 All Purpose
Knife/Skiver 138mm
No 67-1 All Purpose
Knife/Skiver 198mm
No 67-2 All Purpose
Knife/Skiver 138mm
No 925 Osborne Skife
No 20 Blade Dispenser
No 51 ½ Osborne
Draw Gauge
No 128-90 Adjustable
Leather 90º Gouge
No 51 ½ Blade
In Sizes
3/32" 1/8" 5/32"
No 488 Saddle String
No 12 Osborne Single
No 452 Osborne
Splitting Bleeder
Creaser Sizes 1 & 2
Stitching Chisel
No 20 Blade Dispenser
No 21 Creaser Tool
1, 2.5, 2.75,
3 & 3.25mm
No 84 Splitting machine
No 86A Splitting Machine/Skiva
This is the original leather splitting machine on
a cast frame and uses a moveable twist handle
to set the blade depth. A locking stop can also
be set to return to the same setting. Operator
inserts a strap and pushes the handle forward
and twists to lock in the position.
When pulling
leather through
the operator
continues to
advance handle
forward with the
free hand to create
a tapered skive.
This machine has an easy leverage control roller
for easy skiving of leather and has an extra wide
8”blade and adjustable handle for a tapered
skive.
Call Free on: 0330 123 1950
Fax: 0161 429 7776
96
Osborne Stretchers
97
Osborne 252 Webbing Stretcher
Osborne 264 Hook
253 Gooseneck Webbing Stretcher
205 Webbing Stretcher
255 Rubber Ended Webbing Stretcher
297 Spring Puller Hook
Osborne 869 B Webbing Stretcher
268 Lever Spring Stretcher
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Osborne Hammers
No 33 Osborne Hammer 5 ½” Head 7oz
No 277 Ripping Hammer 5” 13oz
No 36 Nylon Tip Hammer 5 ½” 6oz
No 1035 Claw Tack Hammer 5 ½” 13oz
No 39 Bronze Magnetic Hammer 5 ½” 9oz
No 1066 Tack Hammer 4 ½” 8oz
No 222 Magnetic Tack Hammer 5 ¼” 7oz
No 236 Magnetic Tack Hammer
No 1036 Claw Tack Hammer Split Head
No 111 Light Weight Upholsterers Hammer
Call Free on: 0330 123 1950
Fax: 0161 429 7776
98
Mallet Range
No 197 Black Rubber Mallet
20-1212 Dead Blow Nylon Hammer
Spare Faces
13-708 Thorex Plastic Hammer
11-712 Nylon/Plastic Hammer
Spare Faces
99
No 393 Rawhide Mauls
No 89 Hickory Mallet
No 90 Hickory Mallet
No 396 White Rubber Mallet
No 196 Rawhide Mallet
MWM 4 Wooden Mallet
Call Free on: 0330 123 1950
Fax: 0161 429 7776
AWLS
No 478 Scratch Awl
No 604-S Scratch Awl
No T-10 Badminton Awl
No T-11 Tennis Awl
No 18 All Purpose Awl
No 140 Haft With Awl
No 143 Peg Awl Haft
No 413 Automatic Awl
No 140-Hawl Haft
928 Sewing Awl
140 Shoe Awl Haft
No 142 Palm Awl Haft
No 145 Sewing Awl
Needles
No 4 Scratch Awl
62012 62014 62016 62018
Size 1
Size 2
Size 3
Size 4
2½" x 4½"
3½" x 5½"
4½" x 6¾"
5½" x 7¾"
No 413N5
Fine
No 413N6
Curved
No 413N8
Course Straight
Call Free on: 0330 123 1950
Fax: 0161 429 7776
100
Bone Folders, Spring Products & Chisels
464 Genuine Bone Folder
727A Straight Bone Folder
465 Synthetic Bone Folder
6”, 7 1/8” & 8”
6 ¼”
6 ¼”
727 Bent Bone Folder
1776 Spring & Wire Connectors
402/12 Combination Tool
6”, 7 1/8” & 8”
1776S2"
1776-4S2"
1777-902"
258 Metal Webbing Tool
720 KLINCH-IT Tool
7200 KLINCH-IT Fastener
761PH Bent Ripping Chisel
401 Spring Bender
404 Spring End Former
101
Call Free on: 0330 123 1950
402 Ripping Chisel
1963 Wire Formers
Fax: 0161 429 7776
762 Straight Chisel
Plier Ranges
98 Duck Bill Pliers
103 Needle Nose Pliers
322 Lasting Pliers
Knipex Combination Pliers
155 Revolving Punch Pliers
233 Lasting Pincers
Side Cutting Pliers PVC Grips
Knipex Diagonal Cutters
Maun Punch Pliers
2501160 160mm
2502160 160mm
7001125 125mm
7001140 140mm
7001160 160mm
7001180 180mm
MAU2230200
200mm
Bent Snipe Nose Cutting Pliers
Knipex Universal Grip Pliers
Locking Pliers Curved Jaw
2622200 200mm
4104250 250mm
084808 185mm
084809 225m
0302160 160mm
0302180 180mm
0302200 200mm
Call Free on: 0330 123 1950
Fax: 0161 429 7776
102
Pins & Needles
183 Push Pins
015001 Upholstery Pins
189 ‘T’ Pins
1 ¼" 19 Gauge
5oz Box
4"
per 144
1", 1¼", 1½" & 2"
227g
199 Twist Pins 21 Gauge
409 Curved Mattress Needle
513 Cord Light
½"
4" 15 Gauge
8" 14 Gauge
501 Extra Light
513X Extra Cord Light
X-2 2" 21 Gauge X-3 3" 19 Gauge X-4 4" 18 Gauge 15112
15116
15120
501 Light Gauge
L-2 2"
L-2.5 2½"
L-3 3"
L-3.5 3½"
L-4 4" L-5 5" L-6 6"
L-7 7"
L-8 8"
103
19 Gauge 18 Gauge
18 Gauge
17 Gauge
16 Gauge
16 Gauge
15 Gauge
15 Gauge
15 Gauge
15232
15234
X-2 2" 23 Gauge
X-2.5 2½" 23 Gauge
513L-2 2" 19 Gauge
15196
513L-2.5 2½" 18 Gauge15198
502X Extra Light 3 Square Point
15192
15194
501 Heavy Gauge
15132
15134
15136
15138
15140
15142
15144
15146
15148
Call Free on: 0330 123 1950
H-2 2”
H-2.5 2½”
H-3 3”
H-3.5 3½”
H-4 4”
H-5 5”
H-6 6”
H-7 7”
H-8 8”
H-10 10”
H-2 2”
17 Gauge
17 Gauge
16 Gauge
16 Gauge
15 Gauge
14 Gauge
14 Gauge
14 Gauge
13 Gauge
13 Gauge
17 Gauge
X-2 2” 21
X-2.5 2 ½” 20
X-3 3” 19
X-3.5 3 ½” 18
X-4 4” 18
Gauge 15242
Gauge 15244
Gauge 15246
Gauge 15248
Gauge 15250
502 Light 3 Square Point
15162
15164
15166
15168
15170
15172
15174
15176
15178
15180
Fax: 0161 429 7776
L-2 2"
L-2.5 2½"
L-3 3”
L-3.5 3½"
L-4 4"
L-5 5"
L-6 6"
L-7 7"
L-8 8"
19 Gauge
18 Gauge
18 Gauge
17 Gauge
16 Gauge
16 Gauge
15 Gauge
15 Gauge
15 Gauge
15262
15264
15266
15268
15270
15272
15274
15276
15278
Tufting Needles & Regulators
408 ‘T’ HANDLE TUFTING TOOL
N520 HANDLE FOR 5mm NEEDLE
N520/1 33cm NYLON TUFT 3 POINT NEEDLE
417 TUFTING NEEDLE
N522 320mm GREY HANDLE EJECTOR NEEDLE
418 CLASPS
414 Mattress Button Tufter
Push & Pull Tufting Needles / Removable Handle
30P/40P Tufting Needle Push Type
30T/40T Tufting Needle Pull Type
12” & 14”
613 Tufting Needle & Clasps
350-1150 Removable Handle
Cavity Needles
Nyloop Needles
N528 J Cavity Needle 15" /380mm
N527 Push Action with Handle 230mm
JC
SC
N529 Slot Cavity Needle 12" /305mm
N530 Slot Cavity Needle 15" /380mm
Call Free on: 0330 123 1950
N526 Pull Action with Handle 230mm
Fax: 0161 429 7776
104
Osborne Curved & Straight Needles
502 Heavy Needles Curved
3 Square Point
504 Straight Single
Round Point
505 Straight Double
Round Point
502H-2 2"
502H-2.5 2½"
502H-3 3"
502H-3.5 3½"
502H-4 4"
502H-5 5"
502H-6 6"
502H-7 7"
502H-8 8"
502H-10 10"
504-4 4"
504-5 5"
504-6 6"
504-8 8"
504-10 10"
504-12 12"
504-14 14"
504-16 16"
504-18 18"
505-6 6”
505-8 8”
505-10 10”
505-12 12”
505-14 14”
505-16 16”
505-18 18”
505-20 20”
17 Gauge 15292
17 Gauge 15294
16 Gauge 15296
16 Gauge 15298
15 Gauge 15300
14 Gauge 15302
14 Gauge 15304
14 Gauge 15306
13 Gauge 15308
13 Gauge 15310
15 Gauge 15362
14 Gauge 15364
14 Gauge 15366
14 Gauge 15368
13 Gauge 15370
13 Gauge 15372
13 Gauge 15374
12 Gauge 15376
12 Gauge 15378
503 Curved Leather Point
554 Straight Single Round Point
503L-2 2"
503L- 2.5 2½"
503L-3 3"
503L-3.5 3½"
503L-4 4"
503L-5 5"
503L-6 6"
503L-8 8"
554-6 6"
554-8 8"
554-10 10"
554-12 12"
554-14 14"
554-16 16"
554-18 18"
19 Gauge 15322
19 Gauge 15324
16 Gauge 15326
16 Gauge 15328
15 Gauge 15330
15 Gauge 15332
14 Gauge 15334
13 Gauge 15336
553 Heavy Curved Leather
Point Sharp Edges
553H-3 3"
553H-4 4"
553H-5 5"
553H-6 6"
553H-7 7"
553H-8 8"
15 Gauge 15342
14 Gauge 15344
13 Gauge 15346
13 Gauge 15348
12 Gauge 15350
12 Gauge 15352
13 Gauge 15386
13 Gauge 15388
12 Gauge 15390
12 Gauge 15392
12 Gauge 15394
11 Gauge 15396
11 Gauge 15398
514 Flocking Needle
514-6 6"
514-7 7"
514-7 7"
514-8 8"
514-8 8"
514-10 10"
12 Gauge 15632
12 Gauge 15634
11 Gauge 15636
12 Gauge 15638
11 Gauge 15640
11 Gauge 15642
14 Gauge 15412
14 Gauge 15414
13 Gauge 15416
13 Gauge 15418
13 Gauge 15420
12 Gauge 15422
12 Gauge 15424
12 Gauge 15426
555 Straight Heavy Double
Round Point
555-6 6"
555-8 8"
555-10 10"
555-12 12"
555-14 14"
555-16 16"
555-18 18"
13 Gauge 15432
13 Gauge 15434
12 Gauge 15436
12 Gauge 15438
12 Gauge 15440
11 Gauge 15442
11 Gauge 15444
If you need any
advice on which
product best suits
your individual
needs
Call
0330 123 1950
One of our friendly sales team
will be more than happy to help...
105
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Osborne Straight Needles
506 Straight Single
3 Square Point
507 Straight Double
3 Square Point Light Gauge
506-6 6”
506-8 8”
506-10 10”
506-12 12”
506-14 14”
506-16 16”
506-18 18”
507-6 6”
507-8 8”
507-10 10”
507-12 12”
507-14 14”
507-16 16”
507-18 18”
14 Gauge 15452
14 Gauge 15454
13 Gauge 15456
13 Gauge 15458
13 Gauge 15460
12 Gauge 15462
12 Gauge 15464
556 Heavy Straight
Single 3 Square Point
556-6 6"
556-7 7"
556-8 8"
556-10 10"
556-12 12"
556-14 14"
556-16 16"
556-18 18"
13 Gauge 15472
13 Gauge 15473
13 Gauge 15474
12 Gauge 15476
12 Gauge 15478
12 Gauge 15480
11 Gauge 15482
11 Gauge 15484
14 Gauge 15492
14 Gauge 15494
13 Gauge 15496
13 Gauge 15498
13 Gauge 15500
12 Gauge 15502
12 Gauge 15504
557 Heavy Double
3 Square Point
557-6 6"
557-8 8"
557-10 10"
557-12 12"
557-14 14"
557-16 16"
557-18 18"
557-20 20"
13 Gauge 15512
13 Gauge 15514
12 Gauge 15516
12 Gauge 15518
12 Gauge 15520
11 Gauge 15522
11 Gauge 15524
11 Gauge 15526
515 Round Point Carpet Needle
508.5 Spring Eye Needle
515-178 1 7/8"18 Gauge 15652
515-2.5 2½" 17 Gauge 15656
16 Gauge 15658
515-3 3"
7 Gauge 15582
508.5-4 4”
508.5-4.5 4½” 7 Gauge 15581
8 Gauge 15588
508.5-4 4”
5 Gauge 15583
508.5-5 5”
7 Gauge 15584
508.5-5 5”
Call Free on: 0330 123 1950
Fax: 0161 429 7776
508 Bent Pack Needles
508-3 3”
14 Gauge
508-3.5 3½”13 Gauge
12 Gauge
508-4 4”
508-5 5”
10 Gauge
508-6 6”
9 Gauge
508-7 7”
7 Gauge
6 Gauge
508-8 8”
5 Gauge
508-9 9”
508-10 10” 4 Gauge
15552
15554
15556
15558
15560
15562
15564
15566
15568
509 Sailmakers & Canvas
509-4 4"
509-3.75 3¾"
509- 3.5 3½"
509-3.25 3¼"
509-3 3"
509-2.75 2¾"
509-2.5 2½"
509-238 2 3/8"
509-2.25 2¼"
9 Gauge 15612
10 Gauge 15614
11 Gauge 15616
12 Gauge 15618
13 Gauge 15620
14 Gauge 15622
15 Gauge 15624
16 Gauge 15626
17 Gauge 15628
561 Pearl & Bead
Sewing Needles
561-30
561-40
30mm 0.40mm 15762
40mm 0.45mm 15764
106
Osborne Needles
562 Sharp Point Tapestry
52248 Weaving Needles
13
52248-37
52248-40
52248-44
52248-48
52248-55
52248-62
52248-68
52248-72
52248-76
52248-90
52248-100
52248-110
14
16
18
22
24
37mm
40mm
44mm
48mm
55mm
62mm
68mm
72mm
76mm
90mm
100mm
110mm
23 GAUGE
22 GAUGE
22 GAUGE
22 GAUGE
22 GAUGE
22 GAUGE
22 GAUGE
22 GAUGE
20 GAUGE
18 GAUGE
17 GAUGE
17 GAUGE
14900
14902
14904
14906
14908
14910
14912
14914
14916
14918
14920
14922
563 Blunt Point Tapestry Needles
554-24 Bolster Needle Round Point
13
14
554-24
24"
11 GAUGE 15400
16
18
22
24
26
564 Smyrna Needles Round Point
John James Yarn Darners Sizes 14/18
564-1 2¾"
564-3 3”
Long Darners are another form of a
darning needle. The extra length and
large eyes make them suitable for
mending with yarn, basting and layering
of fabrics together, Ideal for the craft
of quilting.
12 Gauge 15862
13 Gauge 15864
JJ 16539
SizeLength Diameter
565 Smyrna Needles Round Point
565-1
565-3
107
2¾"
3"
12 Gauge 15872
13 Gauge 15874
Call Free on: 0330 123 1950
1 75mm1.02mm
3 70mm0.86mm
5 64mm0.76mm
7 58mm0.69mm
9 52mm0.61mm
1595mm1.83mm
1785mm1.42mm
Fax: 0161 429 7776
Hog Rings, Pliers & Zip Attachment Products
1440 AC Straight Handle
Closed Spring
1440 BC 135 Degree Handle
Closed Spring
1440 CC Side Bent Handle
Closed Spring
1443 Blunt Hog Rings
1442 Sharp Hog Rings
1013 Stainless Steel
Zipper Stops
1012 Zipper Stops Plier
1014 Zipper Jig
520 Upholsterers Regulator with Handle
Upholsterers Regulator with Eye
66062 6"
66064 8"
66066 10"
66068 12"
16052
Xl Size 6
10 Gauge
16054
Xl Size 8
10 Gauge
16056
Xl Size 10
10 Gauge
16032
L Size 6
9 Gauge
16034
L Size 8
9 Gauge
16036
L Size 10
8 Gauge
16038
L Size 12
7 Gauge
16042
H Size 6
6 Gauge
16044
H Size 8
6 Gauge
16046
H Size 10
5 Gauge
16048
H Size 12"
5 Gauge
10 Gauge
10 Gauge
10 Gauge
10 Gauge
Call Free on: 0330 123 1950
Fax: 0161 429 7776
108
Stapling
109
71 Series Tool 4 – 16mm
71 NL50 Long NoseTool 4 – 16mm
71 Series Speedy Tool 4 – 16mm
Magazine Capacity 180 Staples
Magazine capacity 180 Staples
71 Series Speedy Long Magazine
Tool 4 – 16mm
97B Series Tool 10 – 25mm
80 Series Long Nose Tool
4 – 16mm
Magazine Capacity 278mm
90 Series Long Nose Tool
9 – 25mm
Call Free on: 0330 123 1950
Fax: 0161 429 7776
80 Series Speedy Long
Magazine Tool 4 - 16mm
Staple Ranges
71 Series Staples 4 – 16mm
97B Range of Staples 4 – 25mm
90 Series 9 – 40mm
32 Series 12, 18 & 25mm
Call Free on: 0330 123 1950
Fax: 0161 429 7776
110
Glue Guns
K-800 Professional Glue Gun
Gx120 12mm Light Duty Glue Gun
Light Volume Usage
80 Watt
Ideal for small amounts of glue
240V / 120w / 193 degree
K-1200 Professional Glue Gun
HM12 Professional
Medium Volume Usage
120 Watt
High Usage Gun
300 Watt
Transparent Multi Purpose Glue Sticks
GX600 18mm
Bulk Pack 1 or 5 Kilo
fits standard types of glue guns in 12mm
Heavy Duty Gun
7mm x 100mm Hot Melt
Glue Sticks for
Rapid RAEG-Point
For further information
or guidance please call
0330 123 1950
One of our friendly sales team will be more
than happy to help...
111
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Buttoning Eyelet & Ventilator Machinery
W1 Button Covering Machine
W2 Hand Press
W3 Pneumatic Button/Snap Fastener/Eyelet
Machine
W4 Pneumatic Button Press
VL40/4 Vent Eyelet Press
For accesories
that partner
these machines.
See Pages: 111 - 127
Call Free on: 0330 123 1950
Fax: 0161 429 7776
112
2 & 3 Pc Button Covering Dies & Plain Grommets
2 Pc Button Covering Dies & Cutter
3 Pc Swivel Button Covering Dies & Cutter
Set of 2 Pcs. Die & Short Cutter to to cover buttons
Osborne No.
Button size
Button diameter (inch)
UPC No.
WDIHUC162
16
3/8
75808
WDIHUC182
18
7/16
75810
WDIHUC202
20
1/2
75812
Set of 3 Pcs. Swivel Dies & long cutter for covering buttons REGULAR MATERIAL
WDIHUC222
22
9/16
75948
Osborne No.
Button size
Button diameter (inch)
UPC No.
WDIHUC242
24
5/8
75956
WDIHUC223
22
9/16
75952
WDIHUC282
28
11/16
75958
WDIHUC243
24
5/8
75960
WDIHUC302
30
3/4
75964
WDIHUC303
30
3/4
75968
WDIHUC362
36
7/8
75972
WDIHUC363
36
7/8
75976
WDIHUC402
40
1
75980
WDIHUC403
40
1
75984
WDIHUC452
45
1-1/8
75988
WDIHUC453
45
1-1/8
75992
WDIHUC502
50
1-1/4
75996
WDIHUC503
50
1-1/4
76000
WDIHUC602
60
1-1/2
76004
WDIHUC603
60
1-1/5
76008
Set of Grommet Dies & Cutter
Set of Grommet Dies & Cutter for PLAIN GROMMETS
113
Call Free on: 0330 123 1950
Osborne No.
Grommet size
Hole diameter
when set (in)
UPC No.
WDIGRC00
00
3/16
75850
WDIGRC0
0
1/4
75854
WDIGRC1
1
9/32
75858
WDIGRC2
2
3/8
75861
WDIGRC3
3
7/16
75869
WDIGRC4
4
1/2
75873
WDIGRC5
5
5/8
75877
WDIGRC6
6
13/16
75883
WDIGRC12
12
1-9/16
75881
WDIGRC15
15
2
75889
Fax: 0161 429 7776
Hog Rings, Grommet Setting Dies, Snap & Setting Dies
Hog Rings - No. 1442
Grommet Setting Dies - Self Piercing
Osborne No.
Grommet size
Hole diameter when set (in)
UPC No.
WDISGRC0
0
1/4
75831
WDISGRC1
1
5/16
75835
WDISGRC2
2
3/8
75837
WDISGRC3
3
7/16
75839
WDISGRC4
4
9/16
75841
WDISGRC5
5
5/8
75843
WDISGRC10
10
1-1/2
75885
WDIHUC603
60
1-1/5
76008
4 Pcs. Set Snap Dies
Description
UPC No.
WDISN201
4 Pcs. dies for Babe Snaps #20 1/2"
76278
WDISN41
4 Pcs. dies for Standard Snaps #24 5/8"
76284
3 Pcs. Set Dies and hole Cutter for Ventilators
3 Pcs. Set Dies and hole Cutter for Ventilators
Osborne No.
Description
UPC No.
WDIVC34
Dies & hole cutter set
for 3/4" ventilators.
76300
Die & hole cutter set
for 1" ventilators.
Call Free on: 0330 123 1950
Description
Weight
each (oz)
UPC No.
WDISP0
Self Piercing setting diet set
for 1/4" grommet
3
75862
WDISP1
for 5/16" grommet
3
75863
WDISP2
for 3/8" grommet
3
75864
WDISP3
for 7/16" grommet
3
75865
No 216 Plain Grommett Setting Die
Osborne No.
WDIVC1
Osborne No.
76292
No. 216 - Plain Grommet Setting Dies
Osborne No.
For grommet size
Weight ea. UPC No.
(lbs) (oz)
216-00
00
1-6
13212
216-0
0
1-6
13214
216-1
1
1-7
13216
216-2
2
1-7
13218
216-3
3
1-9
13220
216-4
4
2-8
13222
216-5
5
2 - 10
13224
216-6
6
3 - 15
13226
216-8
8
3 - 16
13230
216-10
10
3 - 10
13232
216-11
11
4 - 15
13234
216-15
15
5 - 15
13236
Fax: 0161 429 7776
114
Spur & Midget Grommett Setting Dies
No. 217 - Spur Grommet Setting Die
Osborne grommet ing dies and
grommet hole cutters are numbered
to correspond with standard size
grommets.
The dies are guaranteed to set
the proper size and style Osborne
grommets. Grommet dies and cutters
should be used with an Osborne
rawhide hammer or wooden mallet, not
with a steel hammer.
We recommend our No. 395 rawhide
hammers for this purpose.
Sets rolled rim grommets & spur
washers. Sizes 0 thru 5 CNC machined
from high grade tool steel, while sizes
6 & up are a malleable iron casting.
Properly machined and hardened. The
finest industrial grommet dies made.
For best results use only Osborne
grommets and washers
G2, N2 & B2 with corresponding sizes.
Osborne
No.
For grommet
size
Weight ea.
(lbs - oz)
UPC No.
217-0
0
1-6
13244
217-1
1
1-7
13246
217-2
2
1-7
13248
217-3
3
1-9
13250
217-4
4
2-8
13252
217-5
5
2 - 10
13254
217-6
6
3 - 15
13256
217-7
7
4-6
13258
217-8
8
5-8
13260
No. 235 - Midget Grommet Setting Die
For setting plain rim grommets and washers.
Mostly for home and hobbyist use.
Available in sizes from 00 to 6.
115
Call Free on: 0330 123 1950
Osborne No.
Size
For grommet size
Weight ea.
(lbs.)
UPC No.
235-00
00
3/16
1
13272
235-0
0
1/4
1
13274
235-1
1
9/32
1
13276
235-2
2
3/8
1-1/4
13278
235-3
3
7/16
1-1/4
17280
235-4
4
1/2
1-1/4
13284
235-5
5
5/8
1-3/4
13286
235-6
6
13/16
1-3/4
13288
Fax: 0161 429 7776
Grommet Hole Cutters, Ventilator Setters & Punches
No. 500 - Grommet Hole Cutters
2 pcs. set. 2 ventilator sizes 3/4" & 1"
For setting 3/4” Ventilators:
1.- Punch 9/16 hole in material (Use Osborne No. 149
-9/16" punch or on vinyl use No. 149 7/16 punch).
Osborne No.
Hole diameter (in)
Weight each (oz)
UPC No.
500-00A
3/16
2
51610
2.- Lay ventilator neck up on base, place material
over ventilator, now slip ventilator ring on
bow side up. A few even taps with an Osborne
Rawhide Mallet No. 196 will set ventilators.
500-0A
1/4
2
51612
For setting 1” Ventilators:
500-1A
9/32
3
51614
500-2A
3/8
3
51616
1.- Punch 3/4 hole in material(Use Osborne No. 149
-3/4” punch or on vinyl use No. 149-5/8 punch).
500-3A
7/16
6
51618
500-4A
1/2
6
51620
500-5A
5/8
9
51622
500-6A
3/4
9
51624
500-7A
7/8
12
51626
500-8A
1
13
51628
2.- Lay ventilator neck up on base, place material
over ventilator, now slip ventilator ring on
bow side up. A few even taps with an Osborne
Rawhide Mallet No. 196 will set ventilators
No. 622 - Ventilator Punch
Osborne
No.
Overall length (in)
Hole diameter
(in)
Weight
each (oz)
UPC No.
622
5-1/4
3/32
10
02198
Osborne No.
Hand Ventilator setter
Weight
each (oz)
UPC No.
621 3/4
for 3/4" ventilators
14
64402
621 1
for 1" ventialtors
20
64404
No. B1 - Dull Black Grommets & Washers
Call Free on: 0330 123 1950
Osborne
No.
Hole diameter
when set (in)
Outside
diameter
(in)
Length
under flange
(in)
Weight
ea.
(lbs - oz)
UPC No.
B1-00
3/16
.460
.135
0-2
71884
B1-0
1/4
.546
.175
0-5
71882
B1-1
9/32
.7
.185
0-8
71886
B1-2
3/8
.835
.215
0 - 12
71888
B1-3
7/16
.955
.295
1-2
71890
B1-4
1/2
1.062
.374
1-8
71892
B1-5
5/8
1.205
.33
1 - 12
71894
B1-6
13/16
1.828
.232
6-0
71896
Fax: 0161 429 7776
116
Grommets & Washers
No. B2 - DULL BLACK Spur Grommets & Washers
For best results in setting our ROLLED rim grommets and SPUR washers, use an Osborne No. 500 hole
punch and an Osborne No. 217 setting die with corresponding sizes.
Also can be set using W-1 & W-3 Machines.
Material is brass with
a dull black finish.
Sizes 0 to 4 are available.
Packed in 1 gross boxes.
Osborne
No.
Hole
diameter
when
set (in)
Outside
diameter
(in)
Length
under
flange
(in)
Weight
per box
(lbs - oz)
UPC No.
B2-0
9/32
.645
.175
0 - 13
13344
B2-1
13/32
.79
.205
1-2
13346
B2-2
7/16
.89
.215
1 - 10
13348
B2-3
15/32
.97
.255
2-4
13350
B2-4
9/16
1.12
.32
2-4
13352
No. G1 - Brass Grommets & Plain washers
For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch
and an Osborne No. 216 setting die with corresponding sizes. Also can be set using W-1 & W-3 Machines.
Material is brass and brass color.
Sizes 00 to 6 available.
Osborne
No.
Hole diameter
when set (in)
Outside
diameter (in)
Length under
flange (in)
Weight per box
(lbs - oz)
UPC No.
G1-00
3/16
.460
.135
0-2
13012
G1-0
1/4
0.546
0.175
0-5
13014
G1-1
9/32
.7
.185
0-8
13016
G1-2
3/8
.835
.215
0 - 12
13018
G1-3
7/16
.955
.295
1-2
13020
G1-4
1/2
1.062
.374
1-8
13022
G1-5
5/8
1.205
.330
1 - 12
13024
No. G2 - BRASS Grommets & SPUR Washers
Grommets and SPUR washers, use an Osborne No. 500 hole punch and an Osborne No. 217 setting die
with corresponding sizes. Also can be set using W-1 & W-3 Machines.
Material is brass with brass finish.
For best results in setting our ROLLED rim.
117
Osborne
No.
Hole diameter
when set (in)
Outside
diameter
(in)
Length
under flange
(in)
Weight per
box (lbs - oz)
UPC No.
G2-0
9/32
.645
.175
0 - 13
13044
G2-1
13/32
.79
.205
1-2
13046
Call Free on: 0330 123 1950
G2-2
7/16
.89
.215
1 - 10
13048
G2-3
15/32
.97
.255
2-4
13050
G2-4
9/16
1.12
.32
2-4
13052
G2-5
5/8
1.27
.38
3-8
13054
G2-6
3/4
1.505
.42
5 - 10
13056
G2-7
29/32
1.725
.446
5 - 10
13058
G2-8
1-3/32
1.91
.465
8-2
13060
Fax: 0161 429 7776
Grommets & Washers
No G3 BRASS Self Piercing Grommets & Plain Washers
Made of heavier gauge brass than traditional sheet metal grommets. Pierce and set in a single action.
No need for a pre-punched hole. These can be set using our Osborne Hand Press Machine No. W-1
or Pneumatic Machine No. W-3 with the correspondent self piercing grommet setting dies.
Packed and sold in 500 pcs per box. Available in 4 sizes.
Osborne
No.
Hole diameter
when set (in)
Outside
diameter (in)
Length under
flange (in)
Weight per box
(lbs) - (oz)
UPC No.
G3-0
1/4
0.550
0.165
0-2
13064
G3-1
5/16
0.630
0.200
0-5
13066
G3-2
3/8
0.750
0.320
0-8
13068
G3-3
7/16
0.970
0.185
0 - 12
13070
No. N1 - Nickel Plated Grommets & Washer
For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch and
an Osborne No. 216 setting die with
corresponding sizes. Also can be set
Osborne
Hole diameter Outside
Length under Weight per box UPC No.
No.
when set (in)
diameter (in)
flange (in)
(lbs - oz)
using W-1 & W-3 Machines.
Material is brass with nickel finish.
Packed in 1 gross
boxes.
N1-00
3/16
.460
.135
0-2
13112
N1-0
1/4
.546
.175
0-5
13114
N1-1
9/32
.7
.185
0-8
13116
N1-2
3/8
.835
.215
0 - 12
13118
N1-3
7/16
.955
.295
1-2
13120
N1-4
1/2
1.062
.374
1-8
13122
N1-5
5/8
1.205
.330
1 - 12
13124
N1-6
13/16
1.828
.232
6-0
13126
No. N2 - Nickel Plated Grommets & Spur Washers
For best results in setting our ROLLED rim grommets and SPUR washers, use an Osborne No. 500 hole
punch and an Osborne No. 217 setting die with
corresponding sizes. Also can be set using
Osborne Hole diameter Outside
Length
Weight per
UPC No.
W-1 & W-3 Machines.
No.
when set (in)
diameter under flange box (lbs - oz)
Material is brass with nickel finish.
Call Free on: 0330 123 1950
(in)
(in)
N2-0
9/32
.645
.175
0 - 13
13144
N2-1
13/32
.79
.205
1-2
13146
N2-2
7/16
.89
.215
1 - 10
13148
N2-3
15/32
.97
.255
2-4
13150
N2-4
9/16
1.12
.32
2-4
13152
N2-5
5/8
1.27
.38
3-8
13154
N2-6
3/4
1.505
.42
5 - 10
13156
N2-7
29/32
1.725
.446
5 - 11
13158
N2-8
1-3/32
1.910
.465
8-2
13160
Fax: 0161 429 7776
118
Grommets & Ventilators
No. SS - Stainless Steel Grommets & Washers
For best results in setting our plain rim grommets
and washers, use an Osborne No. 500 hole punch
and an Osborne No. 216 setting die with
corresponding sizes. Also can be set using
W-1 & W-3 Machines.
Osborne
No.
Hole
diameter
when set
(in)
Outside
diameter
(in)
Length
under
flange
(in)
Weight
ea.
(lbs - oz)
UPC No.
SS-00
3/16
.46
.135
0-2
72880
SS-0
1/4
.546
.175
0-5
72882
Material is stainless steel.
SS-1
9/32
.7
.185
0-8
72884
SS-2
3/8
.835
.215
0 - 12
72886
SS-3
7/16
.955
.295
1-2
72888
SS-4
1/2
1.062
.374
1-8
72890
No V-1- Ventilators
One-piece construction for added strength. Used as breathers for mattresses,
cushions and plastic slipcovers. This ventilators are set with our Osborne No. 621
and can be also set using Osborne Hand Press W-1 & Pneumatic Machine W-3
with the ventilator dies. Ventilators are solid brass. 2 sizes are available.
Osborne No.
Size
Diameter (in)
Weight ea.
(lbs - oz)
UPC No.
V-1 3/4
3/4
9/16
1
14412
V-1 1
1
3/4
1-4
14414
Oversized Grommet & Washers
These LARGE GROMMETS are installed with our Osborne No. W-1 Hand Press Machine or W-3
Pneumatic Machine using their correspondent grommet dies.
Available in 3 sizes: 10(1-1/2"), 12(1-9/16") and 15(2").
4 finishes: BRASS, NICKEL, BLACK and ANTIQUE.
Packed and sold in boxes of 20 sets. Size 10 is SPUR,
12 & 15 are PLAIN. Mostly used on draperies.
Osborne
No.
119
Description
Grommet
size
Hole diameter
when set (in)
Outside
diameter (in)
Length under
flange (in)
Grommets
per box
Weight ea.
(lbs) (oz)
UPC No.
G2-10
BRASS SPUR grommets & washers
10
1-1/2
2.36
.355
20
1-3
13062
A1-12
ANTIQUE PLAIN grommets & washers
12
1-9/16
2.453
.360
20
1-3
13162
B1-12
BLACK PLAIN grommets & washers
12
1-9/16
2.453
.36
20
1-5
71878
G1-12
BRASS PLAIN grommets & washers
12
1-9/16
2.453
.36
20
1-5
71880
N1-12
NICKEL PLAIN grommets & washers
12
1-9/16
2.453
.36
20
1-5
71874
A1-15
ANTIQUE PLAIN grommets & washers
15
2
3.135
.420
20
1-5
71876
B1-15
15
2
3.135
.420
20
1-6
71879
G1-15
15
2
3.135
.420
20
1-6
71881
N1-15
NICKEL PLAIN grommets & washers
15
2
3.135
.420
20
1-6
71872
1-6
71877
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Aluminium Shells, Joined Pivot Buttons & No dent Nails
Aluminum Shells - 5 gross box
Button Chart.
The standard measurement for buttons is 40 lignes per inch.
Therefore size 30 is 3/4”, size 60 is 1-1/2”, etc. Dimensions shown
are for buttons before covering.
Aluminum Shells
- 5 gross box
Hole diameter
when set (in)
Outside diameter
(in)
Osborne No.
Button size
UPC No.
WSHA22-5
22
77284
WSHA24-5
24
74724
WSHA30-5
30
77300
WSHA36-5
36
77316
WSHA40-5
40
77332
WSHA45-5
45
77348
Joined Pivot Buttons Set (1/2")
Osborne No.
Button
size
Length
of tack
(in)
Combo - No Dent Nails with Soft Shells - 5 gross box
UPC No.
Osborne No.
Button size
Length (in)
UPC No.
WCM2234NDSS5GR
22
3/4
75104
WCM2278NDSS5GR
22
7/8
75132
WCM221NDSS5GR
22
1
74010
WCM3034NDSS5GR
30
3/4
75320
WCM301NDSS5GR
30
1
75256
WCM2212PBPTSSSET
22
1/2
73214
WCM30114NDSS5GR
30
1-1/4
75257
WCM2412PBPTSSSET
24
1/2
74161
WCM30112NDSS5GR
30
1-1/2
75259
WCM3012PBPTSSSET
30
1/2
73234
WCM3634NDSS5GR
36
3/4
75448
WCM3612PBPTSSSET
36
1/2
73246
WCM361NDSS5GR
36
1
74074
WCM4012PBPTSSSET
40
1/2
73256
WCM36114NDSS5GR
36
1-1/4
74062
WCM4512PBPTSSSET
45
1/2
73264
WCM451NDSS5GR
45
1
74100
WCM6012PBPTSSSET
60
1/2
73276
WCM6034NDSS5GR
60
3/4
74101
Call Free on: 0330 123 1950
Fax: 0161 429 7776
120
Nylon Snap Rings, Super Hooks & Prongs with Soft shells
Combo - Nylon Snap Rings with Soft Shells
Osborne No.
Description
Button size
UPC No.
WCM30PSRSS1GR
Nylon Snap Rings with Soft Shells - 1 gross box
30
78388
WCM30PSRSS5GR
30
75392
WCM36PSRSS1GR
36
75492
WCM36PSRSS5GR
36
75496
Combo - Nylon Super Hook with Soft Shells
Osborne No.
Description
Button size
UPC No.
WCM22SHSS1GR
Nylon Super Hook # 22 with Soft Shells - 1 gross box
22
75159
WCM22SHSS5GR
22
75160
WCM30SHSS1GR
30
75395
WCM30SHSS5GR
30
75396
WCM36SHSS1GR
36
75503
WCM36SHSS5GR
36
75504
WCM40SHSS1GR
45
75615
WCM40SHSS5GR
45
75616
Combo – Prongs with Soft Shells – 5 gross box
121
Osborne No.
Description
WCM22112PRSS5GR
Prongs with soft shells - 5 gross box
WCM222PRSS5GR
2
22
75084
WCM22212PRSS5GR
2-1/2
22
75064
WCM242PRSS5GR
2
24
75180
WCM24212PRSS5GR
2-1/2
24
75168
WCM30112PRSS5GR
1-1/2
30
75240
WCM302PRSS5GR
2
30
75308
WCM30212PRSS5GR
2-1/2
30
75272
WCM303PRSS5GR
3
30
75328
WCM36112PRSS5GR
1-1/2
36
75404
WCM362PRSS5GR
2
36
75428
WCM36212PRSS5GR
2-1/2
36
75420
WCM40112PRSS5GR
1-1/2
40
75512
WCM402PRSS5GR
2
40
75520
WCM452PRSS5GR
2
45
75572
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Length (in)
Button size
1-1/2
22
UPC No.
75036
Threaded Nails with Soft Shells, Unassembled
Tack Molds & Nylon Snap Rings
Combo - Threaded Nails with Soft Shells
Osborne No.
Description
Length (in)
Button size
WCM2278TNSS5GR
Threaded Nail with Soft Shell - 5 gross box
7/8
22
UPC No.
WCM22112TNSS5GR
1-1/2
22
75048
WCM222TNSS5GR
2
22
75092
WCM2478TNSS5GR
7/8
24
74034
WCM3078TNSS5GR
7/8
30
75352
WCM30112TNSS5GR
1-1/2
30
75252
WCM302TNSS5GR
2
30
75308
WCM3634TNSS5GR
3/4
36
75470
WCM3678TNSS5GR
7/8
36
75472
WCM36112TNSS5GR
1-1/2
36
75412
WCM362TNSS5GR
2
36
75440
75140
Unassembled Nail or Tack Mold - 5 gross box
Unassembled Nylon Snap Rings
Osborne No.
Description
Button size
UPC No.
WCM22COCWSS5GR
Collet, cardboard wad and soft shell 5 gross
22
73226
WCM30COCWSS5GR
30
73090
WCM36COCWSS5GR
36
73226
WCM40COCWSS5GR
40
73166
WCM45COCWSS5GR
45
73180
Nylon Snap Hook
Osborne No.
Button size
UPC No.
WPSH22-5
22
77116
UPC No.
Osborne No.
Button size
WPSH30-5
30
77128
WPSR30-5
30
76868
WPSH36-5
36
77144
WPSR36-5
36
74712
WPSH45-5
45
77156
Call Free on: 0330 123 1950
Fax: 0161 429 7776
122
Wire Eyes with Soft Shells and Aluminium Shells
Combo - Wire Eyes Style # 44 with Soft Shells - 5 gross box
Osborne No.
Description
Button size
UPC No.
WCM1644WESS5GR
WCM1844WESS5GR
Wire Eyes style # 44 with Soft Shells - 5 gross box
16
73196
18
73204
WCM2044WESS5GR
20
73212
WCM2244WESS5GR
22
75120
WCM2444WESS5GR
24
75200
WCM2844WESS5GR
28
74219
WCM3044WESS5GR
30
75344
WCM3644WESS5GR
36
75464
WCM4044WESS5GR
40
75540
WCM4544WESS5GR
45
75592
WCM5044WESS5GR
50
75636
WCM6044WESS5GR
60
75672
Button size
UPC No.
Combo - Wire Eyes with Aluminum Shells - 5 gross box
Osborne No.
Description
WCM2244WEAS5GR
Wire Eyes with Aluminum Shells - 5 gross box
22
77030
WCM2444WEAS5GR
24
73056
WCM3044WEAS5GR
30
73084
WCM3644WEAS5GR
36
73127
WCM4044WEAS5GR
40
73160
WCM4544WEAS5GR
45
73174
Combo - Wire Eyes with Soft Shells - 5 gross box
123
Osborne No.
Description
Button size
UPC No.
WCM229WESS5GR
22
75156
WCM249WESS5GR
24
75216
WCM309WESS5GR
30
78368
WCM369WESS5GR
36
75488
WCM409WESS5GR
40
75560
WCM459WESS5GR
45
75612
WCM509WESS5GR
50
75652
WCM609WESS5GR
60
75688
Call Free on: 0330 123 1950
Fax: 0161 429 7776
No dent Nails, Concave Nail Button Driving Tool, Fibre
Washers, Nylon Poly Washers & Cardboard Washers
No Dent Nails - 5 gross box
Concave Nail Button Driving Tool
Osborne No.
Button
size
Length of
tack (in)
UPC No.
WND2234-5
22
3/4
76672
WND2278-5
22
7/8
76688
WND221-5
22
1
74677
WND3034-5
30
3/4
76752
WND301-5
30
1
76704
WND30114-5
30
1-1/4
76736
WND30112-5
30
1-1/2
76720
WND3634-5
36
3/4
76792
WND361-5
36
1
74682
WND36114-5
36
1-1/4
74688
WND451-5
45
1
76808
WND6034-5
60
3/4
76378
Fibre Washer
Osborne No.
Overall length (in)
Diameter of head (in)
Weight each (oz)
UPC No.
915
4-1/4
1
5
76350
Nylon Poly Washer for Super Hook
Osborne No.
Description
Diameter
(in)
UPC No.
WWAF138-5
Fibre
Washer for
prong - 5
gross box
1-3/8
77932
Cardboard Washers
Osborne No.
Description
Osborne No.
Description
Diameter (in)
UPC No.
WASHC035
35mm Cardboard Washer
WWAP138-5
Nylon poly washer for super hook - 5 gross box
1-3/8
74748
WASHC050/1
50mm Cardboard Washer 12mm Hole
WWAP138-1
Nylon poly washer for super hook - 1 gross box
1-3/8
74747
WASHCREC01
Rectangle Cardboard Washer
Call Free on: 0330 123 1950
Fax: 0161 429 7776
124
Wire Eyes & Single Pivot Tacks
No. WWE44 - Wire Eye Only - Style # 44 - 5 gross box
Osborne No.
Description
Button size
UPC No.
WWE1644-5
Wire eye only style # 44
16
76524
WWE1844-5
18
76534
WWE2044-5
20
76544
WWE2244-5
22
78016
WWE2444-5
24
78048
WWE2844-5
28
76522
WWE3044-5
30
78080
WWE3644-5
36
78108
WWE4044-5
40
78140
WWE4544-5
45
78172
WWE5044-5
50
78204
WWE6044-5
60
78236
No. WWE9 - Wire Eye Only - Style # 9
Osborne No.
Description
Button size
UPC No.
WWE229-5
Wire eye only - Style 9 - 5 gross box
22
77073
WWE249-5
24
78064
WWE309-5
30
78096
WWE369-5
36
78124
WWE409-5
40
78156
WWE459-5
45
78188
WWE509-5
50
78220
WWE609-5
60
78254
Length of
tack (in)
UPC No.
1/2
74186
Single Pivot Tack 1/2" - 5 gross box
Osborne No.
WDPTKBK2212-5
125
Call Free on: 0330 123 1950
Button size
22
WDPTKBK2412-5
24
1/2
74256
WDPTKBK3012-5
30
1/2
76332
WDPTKBK3612-5
36
1/2
74386
WDPTKBK4012-5
40
1/2
74458
WDPTKBK4512-5
45
1/2
74530
WDPTKBK6012-5
60
1/2
74602
Fax: 0161 429 7776
Plastic Domed Buttons, Washers, Prongs
Prongs - 5 gross boxes
Osborne No.
Button size
Overall length (in)
UPC No.
WPR22112-5
22
1-1/2
76888
WPR222-5
22
2
76904
WPR22212-5
22
2-1/2
76920
WPR242-5
24
2
76936
WPR24212-5
24
2-1/2
76952
WPR30112-5
30
1-1/2
76968
WPR302-5
30
2
76984
WPR30212-5
30
2-1/2
77000
WPR303-5
30
3
77016
WPR36112-5
36
1-1/2
77032
WPR362-5
36
2
77048
WPR36212-5
36
2-1/2
77064
WPR40112-5
40
1-1/2
77080
WPR402-5
40
2
77092
WPR452-5
45
2
77104
Metal Prong Washers - 5 gross box
Osborne No.
Description
WWAM1-5
Metal prong washer 1" diameter
WWAM138-5
Metal prong washer 1-3/8" diameter
PomPom Washers
Diameter (in)
Weight
each (oz)
UPC No.
1
12
77948
1-3/8
14
77964
Plastic Domed Buttons # 40 - 5 gross box
Osborne No.
Color
Button
size
UPC No.
WPLDBB-5
Beige
40
76836
POMPOM-S01
PomPom Singles 01
45mm
5-30mm
WPLDBDB-5
Dark Brown
40
76848
POMPOM-S03
PomPom Singles 03 White
45mm
5-30mm
WPLDBW-5
White
40
76860
Felt Washers
Call Free on: 0330 123 1950
A
B
C
WASHF03WH
Standard Felt Washer 520GSM
0mm
5mm
4.5 mm
WASHF04WH
Tudor Felt Washer 520GSM
40mm
5mm
4.5mm
WASHF07WH
Tudor Felt Washer 620GSM
40mm
5mm
4.0 mm
WASHF13W
Standard Felt Washer 620GSM
30mm
5mm
4.0 mm
WASHF01XX
Standard Press Felt Washer
3.3mm where XX is the colour
30mm
5mm
3.3 mm
WASHF14W
Hypo Non-allergic F14 Felt Washer
Fax: 0161 429 7776
126
Single Pivot Backs, Spring Metal Washers,
Soft Shells & Threaded Nails
Single Pivot Backs - 5 gross box
Osborne No.
Button
size
Length of
tack (in)
UPC No.
WDPIVBK22-5
22
1/2
78646
WDPIVBK24-5
24
1/2
74137
WDPIVBK30-5
30
1/2
76320
WDPIVBK36-5
36
1/2
74148
WDPIVBK40-5
40
1/2
74156
WDPIVBK45-5
45
1/2
74164
WDPIVBK60-5
60
1/2
74172
Spring Metal Washer - 5 gross box
Osborne No.
Description
WWAS10-5
Spring metal washer # 10 - 5 gross box
Size (in)
UPC No.
5/16 x 7/8
77988
Diameter (in)
UPC No.
1-3/8
78002
Length of nail (in)
UPC No.
Spring Metal Washer - 5 gross box
Soft Shells - 5 gross box
Osborne No.
Description
WWASP15-5
Spring Metal Washer # 15 - 5 gross box
Threaded Nails - 5 gross box
Osborne No.
127
Button size
UPC No.
WSHS16-5
16
76462
Osborne No.
Button size
WSHS18-5
18
76472
WTN2278-5
22
7/8
77788
WSHS20-5
20
76482
WTN22112-5
22
1-1/2
77756
WSHS22-5
22
77620
WTN222-5
22
2
77772
WSHS24-5
24
77636
WTN2478-5
24
7/8
74730
WSHS28-5
28
77642
WTN3078-5
30
7/8
77844
WSHS30-5
30
77652
WTN30112-5
30
1-1/2
77812
WSHS36-5
36
77668
WTN302-5
30
2
77828
WSHS40-5
40
77684
WTN3634-5
36
3/4
77892
WSHS45-5
45
77700
WTN3678-5
36
7/8
77908
WSHS50-5
50
77716
WTN36112-5
36
1-1/2
77860
WSHS60-5
60
77732
WTN362-5
36
2
77876
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Decorative Nails
No. 680 - Oxford Hammered Nail
Osborne No.
Length of
nail (in)
680 1/2
No. 681 - French Natural Nail - Small
Diameter of
head (in)
Weight per
box (lbs)
UPC No.
Osborne No.
Length of
nail (in)
1/2
7/16
680 5/8
5/8
680S 1/2
1/2
680S 5/8
5/8
2
14442
681 1/2
1/2
7/16
2
14444
681 5/8
5/8
3/8
2
14454
7/16
2
14447
681S 1/2
1/2
3/8
2
14457
7/16
2
14449
681S 5/8
5/8
3/8
2
14459
No. 682 - French Natural Nail - Regular
Osborne No.
Length of
nail (in)
682 1/2
1/2
Diameter of
head (in)
Weight per
box (lbs)
7/16
2
Diameter of
head (in)
Weight per
box (lbs)
3/8
2
UPC No.
14452
No. 682N - French Natural Nickel Plated nail
UPC No.
Osborne No.
Length of
nail (in)
Diameter of
head (in)
Weight per
box (lbs)
UPC No.
14462
682N 1/2
1/2
7/16
2
14472
682N 5/8
5/8
7/16
2
14474
682 5/8
5/8
7/16
2
14464
682S 1/2
1/2
7/16
2
14467
682NS 1/2
1/2
7/16
2
14477
14469
682NS 5/8
5/8
7/16
2
14479
Diameter of
head (in)
Weight per
box (lbs)
7/16
2
682S 5/8
5/8
7/16
2
N0 683 Daisy Ornamental Nail
Osborne No.
Length of
nail (in)
683 1/2
683 5/8
No 684 Overlap Nails
Diameter of
head (in)
Weight per
box (lbs)
UPC No.
Osborne No.
Length of
nail (in)
1/2
7/16
5/8
7/16
2
14482
684 1/2
1/2
2
14484
683S 1/2
1/2
684 5/8
5/8
7/16
2
14493
7/16
2
14487
684S 1/2
1/2
7/16
2
14495
683S 5/8
5/8
7/16
2
14489
684S 5/8
5/8
7/16
2
14498
Call Free on: 0330 123 1950
Fax: 0161 429 7776
UPC No.
14492
128
Mattress Tufts & Nyloops
Product Code
Components
POCX .YZZ
Cotton POPIN Mattress Tuft Where X are
whole inches, Y decimal inches and Z
head colour if applicable.
EXAMPLE
N531
6.5" White Cotton POPIN Mattress Tuft
N532
7.5" Natural Cotton POPIN Mattress Tuft
N533
8.0" Black Cotton POPIN Mattress Tuft
Product Code
Components Per 1000
PON XXXZZ
Nylon POPIN Mattress tuft. Where X are
whole millimetres and Z head colour
Examples
N534
155mm White Nylon POPIN Mattress Tuft
N535
165mm Black Nylon POPIN Mattress Tuft
N536
250mm Burgundy Nylon POPIN Mattress
Tuft.
Product Code
Components
POP XXXZZ
Where X are whole millimeters and Z head
colour if applicable
Examples
N537
155mm White Poly POPIN Mattress Tuft
B538
165mm Black Poly POPIN Mattress Tuft
N539
250mm Burgundy Poly POPIN Mattress Tuft
Nyloops
Product Code
Components
SUL XXX
NYLOOP where X is size in millimeters
Example
129
Call Free on: 0800 328 7621
N540
40mm NYLOOP
N541
305mm NYLOOP
Fax: 0161 429 7776
Hook & Loop Fasteners
Standard Sew On Fasteners
Acrylic Adhesive Back Fasteners
Coins
Standard Sew On Fastener Sizes
White
Black
90010016mm HOOK
90010116mm LOOP
90010820mm HOOK
90010220mm LOOP
90010225mm HOOK
90010525mm LOOP
90010730mm HOOK
90011130mmLOOP
90011350mmHOOK
90010316mm HOOK
90011416mmHOOK
90011030mmHOOK
Acrylic Adhesive Back Fastener Sizes
White
Black
90010820mm HOOK
90010920mm LOOP
90011825mmHOOK
90011925mmLOOP
90012030mm HOOK
90012130mm LOOP
90012250mm HOOK
90012350mm LOOP
90010425mm HOOK
90011625mmLOOP
90011730mmHOOK
90011830mmLOOP
Other widths and colours
available on each type.
Rubber backed adhesive
also available.
Coin Description
Die cut shapes on a clear polyliner for easy application
Rubber based adhesive
Customs sizes and acrylic adhesives to order
Sizes 10, 13, 16, 20, 21, 22, 33 & 80mm
25M rolls
Black, white & colours
20 x 16, 20 x 20, 20 x 25, 20 x 30, 20 x 50, & 25 x 25mm
Also available in ovals shapes.
Fire Retardant
Elastic Loop
Un-napped
Mushroom Hook
Refer to our website for more details.
Call Free on: 0330 123 1950
Fax: 0161 429 7776
130
Furniture Labels
Code: ST101
Code: ST102
Caution Type 2 (strung) swing ticket
Code: ST103
Green Resistant (strung) swing ticket
Code: ST104
Caution Type 2 (unstrung) swing ticket
Code: ST105
BS7177 Low Hazard
Code: ST106
BS7177 Medium Hazard
Code: ST107
BS7176 Resistant
Code: ST108
Self Adhesive
131
Call Free on: 0330 123 1950
Green Resistant (unstrung) swing ticket
Code: ST109
Sew-on
Fax: 0161 429 7776
Code: ST110
Sew-on
A
Bosch Foam Cutter.......... 67
Brass Grommets
& Spur Washers...... 119-121
Aerosols............................ 81
Burling Irons..................... 82
Airsafe Bubble Wrap........ 31
Button Covering Dies.... 113
Aluminium Shells.......... 122
Button Chart................... 120
Arrow 5S Gun MK1............ 1
Button, Eyelet &
Vent Machines................ 112
Arrow 9X Fine MK1
Tagging Gun....................... 3
Avery Dennison
Elastic Stapling
System.............................. 11
Avery Dennison MK11
Fine Tagging Gun............... 3
Avery Dennison
MKV Tool............................. 2
Avery Dennison ................ 2
Standard Microspace
attachments
Avery Dennison ................ 2
Standard MK111 Gun
Avery Dennison Standard
Nylon Attachments............ 5
Buttoneer
Attachments....................... 7
Buttoneer Guns.................. 7
C
Cutting Nippers................ 93
D
Fastfil & Biofil................... 28
Dalo Textile Markers........ 64
Fault Arrows..................... 15
Decrative Nails............... 128
Feed Dogs......................... 86
Denva Tapes...................... 25
Felt Washers................... 126
Desk Top Dispensers........ 27
Fibre Washers................. 121
Detector Pens................... 19
Fine Avery Dennison
Attachments....................... 6
Display Hooks.................. 14
Display Thread.................. 23
Cable Ties......................... 12
Card Holders.................... 23
Cardboard Washers....... 122
Documents Enclosed
Envelopes......................... 28
Carpet Scissors................ 59
Double Wishbone
Attachments....................... 8
Carton Sealers.................. 26
Dressmaking Pins............ 72
Ceramic Knives................ 34
Duck Bill Pliers............... 102
Chalk Pencils.................... 63
Dull black Grommets
& Washers...................... 116
Chalk Sharpeners............ 63
Chinagraph Pencils.......... 64
Awls................................ 100
Chisels............................ 101
Cleaning Brushes............. 82
Cleaning Guns
& Fluid.............................. 82
F
Fasloop Tool &
Attachments....................... 9
Display Hooks.................. 13
Avery Dennison Standard
Polyprop Attachments....... 5
B
Cutting Machines for
Composite Materials ...... 69
Duotab Labels.................. 16
E
Fine U-Tach
Attachments....................... 6
Fire-A-Tag Hook
Attachments..................... 13
Fire-a-Tag Loops.............. 12
Fire-A-Tag MK11 Fine
Tagging Gun....................... 3
Fire-A-Tag MK11 Gun......... 2
Fire-A-Tag MK11
Standard Long Gun........... 4
Fire-A-Tag
MK111 Gun......................... 2
Fire-a-Tag Needles
Standard............................. 1
E - Stretch......................... 29
Fire-a-Tag Standard
Needles MK11.................... 2
Fish Knives....................... 36
Bagging Machine............. 30
Cleartab Labels................ 16
E Tape................................ 25
Banok Guns ....................... 1
Standard MK1
Clip Hooks........................ 14
Eastman
Cutting Machines............. 65
Fiskars Range
of Scissors.................. 46, 47
Eastman Cutting Machines
Parts.................................. 70
Fitting Room Discs........... 19
Elaxa Cutting
Machines.......................... 69
G
Banok MK1
fine Tagging Gun................ 3
Banok MK1 Long
Fine Gun............................. 4
Banok MK1 Standard
Long Gun............................ 4
Cloth Clamps.................... 78
Cloth Weights................... 78
Clothes Brushes............... 19
Combo Wire Eyes.......... 120
with Soft Shells
Concave with ................. 120
Aluminium Shells
Embroidery Scissors....... 60
Envosafe Mailing Bags.... 31
Folders.............................. 89
Furniture Labels................. 1
Euro Slide on Hooks........ 13
Garments Clips................ 14
Examiners Dots................ 15
Glass Head Pins............... 72
Extra Heavy
Duty Needles...................... 8
Glue Guns &
Consumables..................111
Extra Heavy Duty
Attachments....................... 8
Grip Seal Bags................. 19
Curved Needles.............. 103
Blades Disposal Boxes.... 33
Cutters Range
of Composite Shears....... 57
Extra Heavy
Duty Guns........................... 8
Grommet Hole Cutters.. 116
Bobbins &
Bobbin Cases................... 85
Cutting & Pattern
Papers............................... 73
Bone Folders.................. 101
Cutting Machines
Blades............................... 71
Battery Round Knife
Machines.......................... 66
Belt Hangers..................... 13
Bespoke Paper Labels..... 15
Binders............................. 87
Black Refuse Bags............ 30
Compensating Feet.......... 84
Concave Nail Button ..... 120
Driving Tool
Cording Feet..................... 84
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Grommet Dies................ 113
Grommet Setting Dies....114
Grommets & Washers... 117
Groz Beckert Sewing
Machine Needles............. 85
132
H
Kai Rotary Knives,
Blades & Mats.................. 81
Merze Range of Scissors
and Shears................54 - 55
Osborne Curved
Needles.................. 105 - 107
Kai Thread Clips............... 41
Mesh Safety Gloves......... 76
Osborne Hammers.......... 98
Kai V 5000 Range
of Scissors........................ 44
Metal Hangers.................. 14
Osborne Mallets............... 99
Metal Prong Washers.... 126
Kick Steps......................... 19
Micropin Guns................... 7
Osborne Straight
Needles.................. 105 - 107
Hancocks Laypowder....... 63
KM Cutting Machines...... 65
Micropitch Attachments.... 7
Osborne Tucking Tools..... 95
Hancocks
Tailors Chalk..................... 63
Knitting Machine Oil........ 79
Micropitch Gun.................. 7
Kretzer Finny Range
of Scissors........................ 50
Micropitch Needles............ 7
Osborne Webbing
Stretchers......................... 97
Hammers.......................... 98
Hancocks
Chalk Pencils.................... 63
Hancocks Tailors Wax....... 63
Hancocks Wax Pencils...... 63
Hang Tabs......................... 19
Hanger Connectors.......... 14
Heatseal Paper................. 73
Hemmers.......................... 89
Hog Rings & Pliers......... 108
Hoog Round Knife
Hook & Loop Fasteners.120
Horsehead
Range of Shears............... 54
HSGM Hotknife................ 67
I
Kretzer Finny Tex
and Texx Range................ 52
Kretzer Heavy Duty
Range of Shears............... 51
Industrial Range of
Scissors and Shears........ 56
Kretzer Zipzap
Range of scissors............. 49
Mundial High
Leverage Shears.............. 56
Pallet Film Dispensers..... 29
K-Tool Fine
Tagging Gun....................... 3
Mundial Knife
Edge Shears..................... 56
K-Tool Standard MK111..... 2
Mundial Rubber
Range of Scissors............ 48
L
Mundial Slicing Knives... 34
Labelling Guns
and Labels........................ 20
Lanyards........................... 36
Laser Labels..................... 17
Laypowder........................ 63
Ironing Systems............... 90
Leather Markers............... 64
K
Kai 3000 Range
of Scissors........................ 42
Kai 5000 Range
of Scissors............... 42 & 43
Mure & Peyrot
Knives and Blades....37 - 38
Pattern & Design
Accessories...................... 77
Pattern Hooks................... 77
Peg Hooks......................... 14
Penguin Knives................ 36
Pinking Shears................. 60
Pins................................... 72
N
Piping Feet........................ 84
Needles Plates.................. 84
Polythene Rolls................ 30
Nickel Plated
Grommets & Washers... 118
Pom Pom Washers......... 126
Plastic Dommed ............ 126
Buttons
Polythene Bags................ 30
No Dent Nails................. 121
Poster Grippers................ 23
Press Clothing.................. 91
Leather Tools.................... 94
No Dent Nails................. 122
with Soft Shells
Left Handed Range
of Scissors & Shears....... 58
Number Dots.................... 15
Presser Feet...................... 84
Nylon Poly Washers....... 121
Printed Packaging Tapes.. 25
Nylon Snap Hooks......... 124
Proton Range
of Composite Shears....... 57
Lint Removers.................. 19
Loopers............................. 86
M
Mallets.............................. 99
Masking Tape.................... 25
Mattress Tool.................... 10
Mattress Tufts................. 129
Kai 7000 Range
of Shears.......................... 45
Maxtapes Masking &
Brown Paper Tapes.......... 25
Kai Shozaburo Range
of Shears.......................... 47
Megastretch Cast Film..... 29
133
Packaging Labels............. 16
Pallet Film Cutters............ 29
Lasting Pincers............... 102
Joined Pivot Buttons..... 122
P
Mofex Cutting Machines.69
Iron Shoes........................ 91
J Hooks............................. 13
Mini Swivel Peg Hooks.... 14
MK1 Fire-a-Tag Guns......... 1
Interleaving Tissue........... 73
J
Millclips............................ 14
Overlock Knives............... 87
Kretzer Safecut
Range of Scissors............ 48
Label Dispensers............. 15
Industrial Gloves.............. 76
Midget Grommet
Setting Dies.................... 115
Call Free on: 0330 123 1950
Nylon Snap Rings.......... 123
Press off Chalk................. 64
Nylon Super Hooks........ 123
Prongs .................... 124, 126
with Soft Shells
Nyloops.......................... 129
Push Pins........................ 103
O
O Tag Attachments............. 8
Q
Q-Clip Attachments.......... 12
Olfa Knives................33 - 36
Olfa Rotary Knives,
Blades & Mats.................. 74
Fax: 0161 429 7776
R
Slide on Hooks................. 13
Snap Off
Knives & Blades............... 33
T
U
Rail Dividers..................... 19
Soft Shells...................... 127
Rasor Range
of Cutting Machines......... 68
Spotmark Paper............... 73
Tach-it Guns Standard....... 1
Unassembled ................ 124
Nail or Tack Molds
Spring end Formers....... 101
Regulators...................... 108
Spring Metal Washers... 127
Tagging Needles
MK1 Fine............................. 3
Unassembled ................ 124
Nylon Snap Rings
Retractable
Safety Knives................... 35
Spur Grommets
& Washers...................... 118
Tagging Needles
MK1 Heavy Duty................ 1
Underlay Paper................ 73
Revolving Punch Pliers.. 102
Spur Setting Dies........... 115
Rotary Hooks.................... 85
ST9500 Tool &
Attachments..................... 10
Tagging Needles
MK1 Long Fine................... 4
Upholsterers
Board Shears................... 56
Tagging Needles
MK1 Premium Long........... 4
Upholstery Skewers...... 103
Rubber Grips.................... 19
S
Stainless Steel
Grommets & Washers....119
Stainless Steel Pins......... 72
Safety Knives................... 36
Safety Pins........................ 72
Sample Seals................... 12
Scarf Hangers................... 13
Scarf Hooks...................... 13
Scarf Loops...................... 13
Schmetz Sewing
Machine Needles............. 87
Schneiden
Range of Shears............... 57
Standard Fire-A-Tag
Attachments....................... 5
Standard Fire-A-Tag Nylon
Attachments....................... 6
Standard U-Tach
Attachments....................... 5
Stanley Knives
& Blades........................... 35
Staple Lifters.................... 92
Staplers.......................... 109
T Pins.............................. 103
Tagging Needles
MK1 Standard 1................. 1
Tagging Needles MK1
Standard Long................... 4
Tagging Needles
MK11 Fine........................... 3
Tagging Needles
MK11 fine Heavy Duty....... 3
Unstrung Tickets.............. 18
U-Tach Fine
Tagging Gun....................... 3
U-Tach Standard Gun........ 2
V
V Belts............................... 83
V Tool & Attachments......... 9
Tagging Needles
MK11 Heavy Duty............... 2
Vanishing Pens & Chalk... 64
Tagging Needles
MK11 Long Standard......... 4
Ventilator Punch............. 116
Ventilator Hole Cutters...114
W
Staples.............................110
Tagging Needles
MK11 Standard................... 2
Scissor Sharpeners.......... 61
Stapling for Packaging.... 32
Tailors Chalk..................... 63
Scissors Holsters............. 61
Steam Boilers................... 90
Tape Measures & Rulers.62
Seam Rippers................... 82
Stirling Range
of Scissors and Shears.... 53
Teflon Hoses..................... 91
Warning Labels................ 15
Textile Whisks................... 83
Wax Chalk......................... 63
Thimbles........................... 82
Wax Pencils...................... 63
Thor Hammers................. 99
Webbing Pliers................. 94
Thread Clips..................... 41
Webbing Stretchers......... 97
Threaded Nails ...... 124, 127
with Soft Shells
Wilkinson Tailors Shears.54
Tickets............................... 18
Wire Eyes........................ 125
Security Set Seals............ 14
Self Adhesive
Coloured Labels............... 15
Strung Tickets................... 18
Sublimating Chalk........... 64
Sewing Machine
Accessories...................... 83
Super Heavy Duty
Attachments....................... 7
Sewing Machine
Lights & Bulbs.................. 83
Super Heavy Duty
Guns.................................... 7
Sewing Machine Oil......... 81
Super Heavy Duty
Needles............................... 7
Sewing
Machinists Chairs............ 83
Shirt Clips......................... 14
Shoulder Pad Clips.......... 14
Sign Holders.................... 23
Silicone Spray.................. 81
Single Pivot Backs......... 127
Tie Backs........................... 14
Suprena
Tourer Polythene
Mailers.............................. 28
Swann Morton
Knives & Blades............... 34
Trimming Knives.............. 88
Swissors & Blades........... 60
Tufting Needles.............. 104
System 1000 Tool
& Attachments.................. 11
Tweezers........................... 82
Single Pivot Tacks........... 125
Size Cubes.................21 - 22
Skiva Machines................ 96
Call Free on: 0330 123 1950
Trouser Clips.................... 14
Warehouse Dividers........ 19
Wire Cutters..................... 95
Z
Zipper Feet....................... 84
Zipper Jigs...................... 108
Twist Pins....................... 103
Two Bar Scarf Ring.......... 13
Two Bar Tie Hooks........... 13
Fax: 0161 429 7776
134
LIMITED
RETAIL | PACKAGING | CUTTING | MANUFACTURING
13 Broadhurst Street, Stockport, Cheshire SK3 8JH
Tel: 0330 123 1950
Call Free on: 0330 123 1950
Fax: 0161 429 7776
Web: www.farndons.com

limited - Farndons.com

Transcription

Similar documents

osborne - Logis de Cordes

craft sewing kids 2013 - Fiskars

Pricelist Design4rent

Magazin FRAGILE Suisse

Nautilus Fabric Water Resistant Cover