5-color printing system for printing on cylindrical objects Model: ZDM-5

5-color printing system for printing on cylindrical objects Model: ZDM-5

5-color printing system for printing on cylindrical objects
Model: ZDM-5
Dieses Maschinenkonzept wurde für das Bedrucken von Trinkflaschen, Dosen Kartuschen usw. entwickelt und
enthält alle notwendigen Baugruppen einer modernen industriellen Produktion.
The uses of servo motors for the drive of the print units are a guaranty of a high degree of accuracy for the
operators, plus ease of conversion for other jobs. Programs for the various print parameters are stored on the
machine memory and can be called up immediately as required. This means that the conversion will happen
automatically.
The feeding system is done by an electro mechanical rotary indexing table. All work stations, such as print
units, feed as well as off-load robots and curing stations are grouped around the indexing table.
By the use of a rotary table, instead to opt for other feeding systems, less jigs are needed. The printing objects
are loaded into the jigs in the loading station, registered and then held until the offloading station is being
reached. By the use of this system a high print registration will be guaranteed.
.
The whole machine control happens with a free programmable PLC from Omron
Technical datas:
Printing machines:
Screen printing machines driven by servo motors
Transport:
drying:
Capacity per hour:
Dimenssions:
Electrical:
Air pressure:
electro-mechanical rotary table
UV-Curing
up to 2300 parts, depends to the diameter
Appr.. 2500x2500 mm
3x400V / 20A / 50/60Hz
5-6 bar
______________________________________________________________________________________
ST Drucksysteme, Kesselstrasse 14, 8200 Schaffhausen / Switzerland / Tel: 052 670 1434
http//www.stsprint.com / E-Mail: [email protected]