Datasheet - Normann Engineering GmbH

Transcription

Datasheet - Normann Engineering GmbH
Optische Systeme / Optical Systems-
ARRIS
OmniStar GX2-CM100B
Controller Module
Vorteile
Advantages








Power PC-Chip sorgt für fortschrittliche Kontrolle sowie
optimierte Leistung
Interner Subagent ermöglicht SNMP ohne proprietäre
Software
Quick-Swap-Funktion: automatische Aktualisierung der
Module nach Austausch
Firmware downloadbar
Zwei Ethernet-Schnittstellen (PC oder Standard NMS)
Im Betrieb mit Omnistar-Plattform unterbrechungsfrei
austauschbar
Contact Closure Relay für externe Alarmmöglichkeiten






Power PC technology provided by Arris for enhanced intelligence
Internal subagent allows communication with SNMP and requires no proprietary software
Provides quick swap capabilities where replacement modules
are recognized and updated with the prestored settings
Downloadable firmware
Two ethernet ports for communication with local PC and
standard network management system
Hot swappable with blind mating to OmniStar GX2 housing
Contact closure relay for external alarm capability
Spezifikationen / Specifications
Kommunikations-Interface / Communications interface
Local Ethernet Port (Vorderseite / front panel)
Datenformat / Data format
Datenrate / Data rate
Anschluss / Connector
Network Management Port (Rückseite / rear panel)
Datenformat / Data format
Datenrate / Data rate
Anschluss / Connector
Chassis-Anschluss / Shelf display unit connector
Alarm Relay
Algemeine Daten / General data
Leistungsaufnahme / Power consumption
Betriebstemperatur / Operating temperature range
Lagertemperatur / Storage temperature range
Abmessungen / Dimensions
Gewicht / Weight
Installation / Mounting
Model
GX2-CM100B
SNMP
10 Mbit/s (10 BaseT Ethernet)
RJ-45
SNMP
10 Mbit/s (10 BaseT Ethernet)
RJ-45
Mini-DIN
Contact Closure, 250 mA/40 VAC or VDC Max
Max. 5 Watt
- 20° ... + 65°C
- 40° … + 80°C
2,5 x 15 x 38 cm
1 kg
GX2-HSG* Chassis / Equipment shelf
Beschreibung / Description
Controller Modul / Control Module
© Copyright Normann Engineering GmbH, Linzer Straße 139, A-4600 Wels, Tel. +43 7242 70921-0 (Fax DW–20), [email protected]
v1.0, Irrtum, Satz- und Druckfehler vorbehalten