0114045039h2 001

Produkte
Products
Prüfbericht - Nr.:
Seite 1 von 3
Page 1 of 3
0114045039h2 001
Test Report No.:
FORMOSA PLASTICS CORPORATION
Formosa Industrial Complex No. 1, Mailiao, Yunlin 638, Taiwan, R.O.C.
Auftraggeber:
Client:
Gegenstand der Prüfung: 1 plastic, off-white
Test Item:
Bezeichnung:
Identification:
台塑烯 HDPE 中空吹製級聚合物/Taisox HDPE Blow Molding Grade Polymer /
9003, 8003, 8003H, 7501, 7501U, 7500, 7001, 7301, 7301U
Anlieferungszustand:
Delivery condition:
apparent good
Prüfort:
Testing location:
TÜV Rheinland Hong Kong Ltd.
Prüfgrundlage:
Test specification:
Testing according to customers specification for the following parameters:
Global migration, Specific migration of metals, Migration of Primary aromatic
amines
Prüfergebnis:
Test result:
The test results are the measurements, stated in the test report.
geprüft: tested by:
kontrolliert: checked by:
2016-01-20 Anne Chen
/Coordinator
Datum
Date
2015-12-29
Eingangsdatum:
Date of Receipt:
Name/Stellung
Name/Position
2016-01-20 Carl Chang
/Department Manager
Unterschrift
Signature
Datum
Date
Name/Stellung
Name/Position
Unterschrift
Signature
Sonstiges/ Other Aspects:
Test period: 2015-12-29 – 2016-01-20
The test sample is model no. 9003.
Model no. 9003 and others are same material as client’s declaration dated on 2016-01-13.
Abkürzungen:
ok / P =
fail / F =
n.a. / N =
entspricht Prüfgrundlage
entspricht nicht Prüfgrundlage
nicht anwendbar
Abbreviations:
ok / P =
fail / F =
n.a. / N =
passed
failed
not applicable
Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht
auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens.
This test report relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be
duplicated in extracts. This test report does not entitle to carry any safety mark on this or similar products.
TÜV Rheinland Taiwan Ltd. Softlines
4F., No.758, Sec. 4, Bade Rd., Songshan Dist., Taipei 105, Taiwan, R.O.C.
Tel.:+886 2 2172-7000 Fax: +886 2 2528-0018
Mail: [email protected]  Web: www.twn.tuv.com
Produkte
Products
Test Report No.
Customer
1.
:
:
0114045039h2 001
FORMOSA PLASTICS CORPORATION
2016-01-20
Global Migration
Test method:
Limit:
The migratory behaviour is examined with reference to Chapter V, Article 18 of
Commission Regulation 10/2011 and its amendments. Deviating to the regulations
the following tests were performed as orientating single tests.
Commission Regulation (EU) No 10/2011 and its amendments
The following food simulants and conditions were applied:
Food simulant
Acetic acid 3 %
Ethanol 95 %
Isooctane
Sample
Material
Lab.-No.
Parameter
Acetic acid 3 %
Ethanol 95 %
Isooctane
Test duration / Temperature
10 day(s) / 40 °C
10 day(s) / 40 °C
2 day(s) / 20 °C
台塑烯HDPE中空吹製級聚合物/Taisox HDPE Blow Molding Grade
Polymer
plastic/off-white
TCL151229-14
Unit
Result
Limit
mg/dm2
<10
10
mg/dm2
<10
10
mg/dm2
<10
10
mg/dm2 = Milligram per square decimetre
< = Less than
The examined item does meet the requirement
Abbreviations:
2.
Specific Migration of metals, Metal-release from Plastic
Test method:
Limit:
The migratory behaviour is examined with reference to Chapter V, Article 18 of
Commission Regulation 10/2011 and its amendments. The determination of amounts of
metals that were released is done via ICP-OES with reference to ISO 11885:2007.
Commission Regulation (EU) No 10/2011 and its amendments
The following food simulant and condition was applied:
Food simulant
Acetic acid 3 %
Sample
Material
Lab.-No.
Parameter
Barium, Ba
Cobalt, Co
Copper, Cu
Iron, Fe
Lithium, Li
Manganese, Mn
Zinc, Zn
Test duration / Temperature
10 day(s) / 40 °C
台塑烯HDPE中空吹製級聚合物/Taisox HDPE Blow Molding Grade
Polymer
plastic/off-white
TCL151229-14
Unit
Result
Limit
mg/kg
<0.1
1
mg/kg
<0.01
0.05
mg/kg
<0.1
5
mg/kg
<1
48
mg/kg
<0.1
0.6
mg/kg
<0.1
0.6
mg/kg
<1
25
Abbreviations:
mg/kg = Milligram per kilogram
< = Less than
The examined item does meet the requirement
2/3
Produkte
Products
Test Report No.
Customer
3.
:
:
0114045039h2 001
FORMOSA PLASTICS CORPORATION
2016-01-20
Migration of Primary Aromatic Amines
Test method:
The migratory behaviour is examined with reference to Chapter V, Article 18 of
Commission Regulation 10/2011 and its amendments. Presence of primary aromatic
amines is carried out with reference to Kunststoffe im Lebensmittelverkehr, Book 2,
Teil B II, XXI.
Limit:
Commission Regulation (EU) No 10/2011 and its amendments
The following food simulant and condition was applied:
Food simulant
Acetic acid 3 %
Sample
Material
Lab.-No.
Parameter
Primary aromatic amines
Test duration / Temperature
10 day(s) / 40 °C
台塑烯HDPE中空吹製級聚合物/Taisox HDPE Blow Molding Grade
Polymer
plastic/off-white
TCL151229-14
Unit
Result
Limit
mg/kg
<0.01
n.d. (<0.01)
Abbreviations:
mg/kg = Milligram per kilogram
< = Less than
The examined item does meet the requirement
Test sample
--- End of Test-Report ---
3/3