Danuser F8 Pricing 4-1

Transcription

Price Sheet - F8 Digger
888.443.3639
www.edneyco.com
F8 PTO DIGGER
TO PRICE A COMPLETE UNIT
Digger
Auger (Pg. 3)
Accessories
___________
___________
___________
Model F8 with Auger
TOTAL ___________
•
•
•
•
•
•
•
•
Category I or II 3-pt. hitch mount
Rated for 40 HP and above tractors
Delivers 1813 ft.-lbs. of torque
2-9/16” round output spindle
30” maximum diameter auger
PTO driven (540 RPM)
Complete with Boom, Yoke, Guarded
Driveline, Input Guard, Gearbox, Auger
Adapter Guard, and Hardware Package
Pins are included to fit Category I or II
diameter and width
MODEL
PN
WT
PRICE
F8
9050
325
$3,125.00
(Sold without Auger & Accessories)
F8 DIGGER ACCESSORIES
PN
9079
DESCRIPTION
WT
PRICE
Down Force Package - Provides approx. 500 lbs. of additional force to the
auger point. Complete with relief and automatic dump valve. (Without Hoses)
51
$675.00
9079 NOTE
Tractor must be equipped with remote outlets and either a three-way valve (as used in operation of a singleacting cylinder) or a four-way valve (as used in the operation of a double-acting cylinder)
HOSES TO TRACTOR NOT SUPPLIED
(Need one hose to a pressurized outlet and one hose to the sump or reservoir)
Form No. 3343
Page 1 of 4
01 April 2015
888.443.3639
www.edneyco.com
F-SERIES CONVERSIONS
PN
DESCRIPTION
20050 Conversion Kit - Used to convert any Danuser PTO Digger with a 622 casting number
over to a 7562 pinion assembly. The kit includes a pinion, Input Guard, complete
guarded driveline all the way to the tractor, a 20051 Auger Adapter Guard, a SMV (slow
moving vehicle) kit with hardware, and an operator’s manual canister with hardware.
WT
PRICE
63
$475.00
34
$295.00
This kit is required on all diggers with serial numbers prior to 59,999.
NOTE: welding will be required.
NET PRICE
20060 Conversion Kit - Used to convert any Danuser PTO Digger with a 622 casting number
over to a 7562 pinion assembly. The kit includes a pinion, Input Guard, all parts out
through the center cross at the U-Joint on the gearbox, a 20051 Auger Adapter Guard,
a SMV (slow moving vehicle) kit with hardware, and an operator’s manual canister with
hardware.
This kit is required on all diggers with serial numbers ranging from 60,001 to 71,199.
NOTE: welding will be required.
NET PRICE
20050 Conversion Kit
Form No. 3343
20060 Conversion Kit
Page 2 of 4
01 April 2015
888.443.3639
www.edneyco.com
KEY
(#)
•
Indicates augers with 3-5/8” center columns. If the customer’s digger has a factory installed 7270 Auger Adapter
Guard, it will cover all 2-3/8” center column augers. ADDITIONALLY, the customer will need (2) 9542 Auger Adapter
Shields when using 3-5/8” center column augers.
Indicates single flight construction
(a)
Includes Auger Adapter Guard
2-9/16” ROUND AUGERS
Double Flight
40” Hole Depth
(Plain Edges)
40” Hole Depth
(Serrated Edges)
DIA
PN
WT
PRICE
DIA
PN
WT
PRICE
4"
450
25
$283.00
4"
---
---
---
6"
417
39
$312.00
6"
---
---
---
9"
1551
46
$320.00
9"
1552
46
$325.00
10"
288
51
$342.00
10"
487
51
12"
412
62
$364.00
12"
488
14"
451
75
$419.00
14"
16"
7650
84
$497.00
16"
18"
1275
87
$577.00
18"
24"
1270
94
$623.00
30"
7857
133
$862.00
36"
9618
169 $1,266.00
488 12” Auger
40” Hole Depth
(Hole Digger Head)
DIA
PN
WT
PRICE
4"
---
---
---
6"
9387
44
$496.00
9"
9314
52
$509.00
$348.00
10"
9315
58
$527.00
62
$369.00
12"
9316
69
$554.00
489
77
$428.00
14"
9317
85
$668.00
7665
84
$501.00
16"
9318
94
$800.00
1276
88
$583.00
18"
9319
125
$1,073.00
24"
1272
94
$632.00
24"
(#) 9320
153
$1,317.00
30"
7935
135
$874.00
30"
(#) 9321
207
$1,666.00
36"
9614
182
$1,272.00
36" • (#) 9412
261
$1,862.00
NOTE:
PN 9618 and PN 9614 have 30” and 9” cutting edges. Refer to PN 9412 for heavy industrial use.
52” Hole Depth
(Serrated Edges)
52” Hole Depth
(Plain Edges)
52” Hole Depth
(Hole Digger Head)
DIA
PN
WT
PRICE
DIA
PN
WT
PRICE
DIA
PN
WT
PRICE
9"
7476
60
$379.00
9"
7497
60
$381.00
9"
9322
71
$604.00
10"
7478
67
$403.00
10"
7498
68
$406.00
10"
9323
75
$633.00
12"
7419
83
$457.00
12"
7499
84
$462.00
12"
9324
92
$706.00
14"
7437 101
$522.00
14"
7519 103
$527.00
14"
9325 112
$856.00
16"
7661 116
$623.00
16"
7734 118
$631.00
16"
9326 126 $1,033.00
HOLE DIGGER HEADS
With removable teeth for field welding to plain and serrated augers
DIA
PN
WT
PRICE
DIA
PN
WT
PRICE
6”
9386
10
$239.00
16"
9310
26
$409.00
9"
9306
17
$281.00
18"
9311
29
$518.00
10"
9307
18
$283.00
24"
9312
35
$704.00
12"
9308
21
$290.00
30"
9313
42
$813.00
14"
9309
24
$322.00
36"
9416
56
$941.00
Form No. 3343
9309 Hole Digger Head
Page 3 of 4
01 April 2015
888.443.3639
www.edneyco.com
2-9/16” ROUND STEPPED & ORCHARD AUGERS
Double Flight
Tree Planting or Landscaping Applications
33” Hole Depth
(Plain Edges)
33” Hole Depth
(Serrated Edges)
DIA
PN
WT
PRICE
DIA
PN
WT
PRICE
18" x 10”
9611
64
$541.00
18" x 10”
9615
75
$552.00
40” Hole Depth
(Plain Edges)
DIA
PN
WT
PRICE
24" x 12”
9612
120
$646.00
30” x 16”
9613
169
$892.00
40” Hole Depth
(Serrated Edges)
9612 24” x 12”
Stepped Auger
DIA
PN
WT
PRICE
24" x 12”
9616
119
$670.00
30” x 16”
9617
168
$916.00
29” Hole Depth
(Serrated Edges)
9850 18” Orchard Auger
DIA
PN
WT
PRICE
18”
9850
64
$455.00
24”
9849
89
$517.00
(a) Includes Auger Adapter Guard
AUGER EXTENSIONS
Shipped with Auger Extension Guards
PN
(a)
DESCRIPTION
SIZE
WT
PRICE
1849G
Auger Extension - for 2-9/16" round spindle diggers
SN 80,999 & below
7"
30
$170.00
20067
SN 81,000 & above
7"
25
$127.00
7494G
14"
34
$149.00
7663G
21"
44
$177.00
9486G
48"
79
$272.00
9489G
72"
115
$335.00
AUGER EXTENSION GUARDS
For older extensions without Auger Extension Guards
PN
(a)
DESCRIPTION
6271
Extension Guard - for use with 2-9/16" round and 2" hex, 7" extension
NET PRICE
6272
Extension Guard - for use with 2-9/16" round and 2" hex,14" extension
and longer
NET PRICE
WT
PRICE
14
$48.00
6
$19.00
Danuser reserves the right to make changes in design, specifications, and prices
without notice and without incurring any obligation relating to such changes.
All Prices F.O.B. Fulton, Missouri
Form No. 3343
Page 4 of 4
01 April 2015

Danuser F8 Pricing 4-1

Transcription

Similar documents

Danuser