sec 9 post hole diggers - Maritime Farm Supply ltd.

Transcription

MARITIME FARM SUPPLY LTD.
“Your Connection to All Your Equipment Needs”
“All Applicable Taxes Extra:
www.maritimefarmsupply.com
F8 POST HOLE DIGGER
TAB # 9: POST HOLE DIGGERS
U. S. PRODUCT
www.danuser.com
•
•
•
•
•
•
•
•
PART
NUMBER
9050
Catigory l or ll 3-pt hitch mount
Rated for 40 hp and above tractors
Delivers 1813 ft-lbs of torque
2-9/16” round output spindle
30” maximum diameter auger
PTO driven (540 RPM)
Complete with boom, yoke, auger adapter guard, gearbox,
driveline, and hardware package
Pins are included to fit cateqory l or ll diameter and width
DESCRIPTION
F8 Digger less auger & accessories
WEIGHT
320 lbs
LIST PRICE
FRT EXTRA
$2,862.00
ACCESSORIES
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
9051
Assembly Hardware Package–allows crane boom and yoke to be mounted on most ASAE 3PT
tractors, Cat l or ll pin size, Cat l width only
9 lbs
$73.00
9052
Assembly Hardware package–allow crane boom and yoke to be mounted on most ASAE 3PT
tractors, Cat ll pin size, Cat ll width only
12 lbs
112.00
7480
Hook and Yoke Assembly-use with 9049 Crane Boom for lifting up to 750 lbs.
10 lbs
152.00
7270
Auger Adapter Guard-furnished with Model F8. Required on all machines with 2 9/16” round
spindle with 2 3/8” dia center column augers.
8 lbs
45.00 NET
9545
Auger Adapter Guard-required on all machines when using 3 5/8” dia center column augers.
9 lbs
96.00 NET
9079
Down Force Package-provides approx. 500 lbs of additional force to the auger point. Complete
with relief & automatic dump valve. (less hoses)
51 lbs
740.00
9079 NOTE
Tractor must be equipped with remote outlets and either a three-way valve (as used in operation of a single-acting cylinder) or a
four-way valve (as used in the operation of a double-acting cylinder).
HOSES TO TRACTOR NOT SUPPLIED
(Need one hose to a pressurized outlet and one hose to the sump or reservoir)
JANUARY 2014
PRICES ON U.S. MANUFACTURED GOODS SUBJECT TO CHANGE
WITHOUT NOTICE DUE TO CURRENCY FLUCTUATIONS
GST # R101743045
Sheet 203
NOTE: PRODUCT NOT IN STOCK IS SUBJECT TO EXTRA FREIGHT CHARGES
To arrive at complete price, take Digger $_____ + Adapter Kit $____ + Auger (2 9/16” Round Spindle Auger) $____ + Accessories $____ =
Total List Price.
U. S. PRODUCT
www.danuser.com
PART
NUMBER
DESCRIPTION
7580
Crane Boom and Yoke-used to convert Dearborn Model 22-11, Danuser Models F2, FA, F7U
and F7uF diggers from either long arm or long boom to current Crane Boom configuration for most
ASAE 3PT tractors. To be used with 9051 or 9052 Assembly Hardware package. To use as a
lifting boom, order 7480 Hook and Yoke Assembly. You Must Also convert any of these older
diggers to our current Production Safety Standards by ordering one of the Conversion Kits listed
below to assure your customer of parts availability in the future. Danuser will not knowingly sell
any parts to an older digger which has not been updated with one of the Conversion Kits. When
the conversion is installed you customer will have the equivalent of a Model F8 with access to any
parts or accessories.
Conversion Kit-used to convert any Danuser PTO Digger wit a 622 casting number over to the
273 pinion. The kit includes a pinion, pinion guard, complete guarded driveline all the way to the
tractor, and a 7270 Auger Adapter Guard for 2 3/8” dia center column augers. This kit required on
all diggers with serial numbers prior to 59,999
Conversion Kit-used to convert any Danuser PTO Digger with a 622 casting number to the 273
pinion. The kit includes a pinion, pinion guard, all parts out through the center cross at the U-Joint
on the gearbox, and a 7270 Auger Adapter Guard for 2 3/8” dia center column augers. This kit
required on all diggers with serial numbers ranging from 60,001 to 71,199
Conversion Kit-same as 7577 except comes with 9545 Auger Adapter Guard for 3 5/8” dia center
column augers
7581
Conversion Kit-same as 7578 except comes with 9545 auger Adapter Guard for 3 5/8” dia center
column augers
9049
7577
7578
JANUARY 2014
WEIGHT
114 lbs
LIST PRICE
FRT EXTRA
$622.00
50 lbs
655.00 NET
18 lbs
403.00 NET
51 lbs
702.00 NET
19 lbs
440.00 NET
GST # R101743045
Sheet 203
F-SERIES CONVERSIONS
J20/80 & G20/40
POSTHOLE DIGGERS
U. S. PRODUCT
www.danuser.com
• Cat l or ll 3PT hitch mount
• Rated for 20-80 hp ONLY tractors
• Delivers 1014ft-lbs of torque
• 2” round output spindle
• 24” maximum diameter auger
• PTO driven (540 RPM)
• Cat l 3PT hitch mount
• Rated for 20-40 hp ONLY tractors
• Delivers 1014ft-lbs of torque
• 2” round ouput spindle
• 24” maximum diameter auger
• PTO driven (540 RPM)
Model J20/80
PART
NUMBER
DESCRIPTION
Model G20/40
WEIGHT
LIST PRICE
FRT EXTRA
6800
Model J20/80 Digger Less Auger and Accessories
260 lbs
$1,779.00
6000
Model G20/40 Digger Less Auger and Accessories
217 lbs
1,526.00
J20/80 & G20/40 ACCESSORIES
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
6109
Yoke Extension Kit-provides approximately 6” of additional lift height to the digger. Amount of
additional lift height will vary depending on the tractor make and model.
5 lbs
$98.00
6347
Adapter Kit-for John Deere 4110/4115 tractors (G20/40)
7 lbs
161.00
6136
Auger Adapter Guard-furnished as part of the J20/80 & G20/40 digger gearboxes. Required on
G20/40 diggers prior to serial # 11,1152. For models J20/80 & G20/40.
9 lbs
55.00 NET
6818
Down Force Package-provides approx. 500 lbs of additional force to the auger point. Complete
with relief and automatic dump valve. (less hoses). For model J20/80
57 lbs
741.00
6220
Down Force Package-provide approx. 500 lbs of additional force to the auger point. Complete
with relief and automatic dump valve. (less hoses). For model G204/40
57 lbs
629.00
6818 & 6220 NOTE
JANUARY 2014
GST # R101743045
Sheet 203
To arrive at complete price, take Digger $_____ + Adapter Kit $____ + Auger (2” Round Spindle Auger) $____ + Accessories $____ = Total
List Price.
8300 & 8800
HYDRAULIC DIGGERS
U. S. PRODUCT
www.danuser.com
• Front-end loader mount attaches to
• Cat l 3PT hitch mount with 3”
side or bottom of bucket
8300-1- 5-10 gpm at 1500-3000 psi
•
• 8300-2 -
O.D. boom and yoke
• 8800-1- 5-10 gpm at 1500-3000
psi
10-20 gpm at 1500-3000
• 8800-2-
10-20 gpm at 1500-3000
psi
2” round output spindle
psi
2” round output spindle
•
• 8300-1 - 14” max dia auger, delivers
•
•
• 8800-1 - 14” max dia auger, deliv-
984ft-lbs of torque at 3000 psi
8300-2 - 24” max dia auger, delivers
1464ft-lbs of torque at 3000 psi
ers 984ft-lbs of torque at 3000 psi
• 8800-2- 24” max dia auger, delivers 1464ft-lbs of torque at 3000
psi
Model 8300
Model 8800
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
6141
8300-1 digger less auger, mounting kit and hoses
134 lbs
$2,014.00
6142
8300-2 digger less auger, mounting kit and hoses
135 lbs
2,048.00
6150
8800-1 digger less auger and hoses
198 lbs
2,418.00
6165
8800-2 digger less auger and hoses
199 lbs
2,458.00
8300 MOUNTING & HOSE KITS
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
6216
Bolt-On Bucket Mounting Kit-will mount on horizontal or vertical surface. (less hardware). For
model 8300
12 lbs
$96.00
6143
Universal Loader Bucket Mounting Kit-fits buckets 48” min wide and 90” max distance around
outside. For model 8300
87 lbs
466.00
6359
3/4” Hose Kit For Bucket Mount– hoses are 15 ft long.
18 lbs
245.00
6360
23 lbs
283.00
6361
29 lbs
324.00
JANUARY 2014
GST # R101743045
Sheet 203
List Price.
U. S. PRODUCT
www.danuser.com
PART
NUMBER
6347
DESCRIPTION
Adapter Kit-for John Deere 4110/4115 tractors. For model 8800
WEIGHT
LIST PRICE
FRT EXTRA
$161.00
7 lbs
8300 & 8800 HYDRAULIC DIGGER ACCESSORIES
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
6109
Yoke Extension Kit-provides approximately 6” of additional lift height to the digger. Amount of additional lift height will vary depending on the tractor make and model. For Model 8800
5 lbs
$98.00
6136
Auger Adapter Guard-furnished with these machines. Required on all machines with 2” spindle.
For models 8300 & 8800
9 lbs
69.00 NET
6220
Down Force Package-provides approx. 500 lbs of additional force to the auger point. Complete with
relief and automatic dump valve. (less hoses). For model 8800.
57 lbs
629.00
6220 NOTE
JANUARY 2014
GST # R101743045
Sheet 203
8800 MOUNTING KIT
DANUSER 8900
HYDRAULIC DIGGERS
U. S. PRODUCT
www.danuser.com
• Mounts - Skid-Steer Quick Attach, Front-End Loader, or
Cat l or ll 3 PT hitch
• 8900-4 - 10-20 gpm at 1500-3000 psi
• 8900-7 & 8900-8 - 14-30 gpm at 1500-3000 psi
• 8900-4 - 36” max dia auger, delivers 1932 ft-lbs of torque
at 3000 psi
• 8900-7 & 8 - 36” max dia auger, delivers 3036 ft-lbs of
torque at 3000 psi
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
9554
Model 8900-4– with 2 9/16” round output spindle (less auger, mounting kit & hoses)
159 lbs
$2,463.00
9557
Model 8900-7– with 2 9/16” round output spindle (less auger, mounting kit & hoses)
161 lbs
2,536.00
9558
Model 8900-8– with 2” hex output spindle (less auger, mounting kit & hoses)
160 lbs
2,609.00
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
9607
Bolt-On Bucket Mounting Kit-will mount on vertical surface. (less hardware, Includes knuckle)
39 lbs
$292.00
9865
Skid Steer Quick Attach Mounting Kit- (includes knuckle) Attaches digger to skid-steer with 2 pin
SAE standard quick couplers.
156 lbs
432.00
9872
1/2” Hose Kit For Skid Steer Mount-hoses are 8 ft long with abrasion sleeves. With flat face ISO
couplers. (includes motor fittings)
15 lbs
245.00
9873
3/4” Hose Kit For Skid Steer Mount-hoses are 8 ft long with abrasion sleeves. With flat face ISO
couples. Required for 20 gpm or more. (includes motor fittings)
20 lbs
333.00
NOTE
Quick couplers will not fit old style Case (prior to XT Line) Skid-Steers.
JANUARY 2014
GST # R101743045
Sheet 203
List Price.
U. S. PRODUCT
www.danuser.com
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
6359
3/4” HOSE KIT FOR BUCKET MOUNT– Hoses are 15 ft long
18 lbs
$245.00
6360
23 lbs
283.00
6361
29 lbs
324.00
8900 3 PT HITCH MOUNTS
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
9049
CRANE BOOM AND YOKE. (for most ASAE 3-point Hitch tractors) to be used with 9051 or 9052
Assembly Hardware Package. To use as a lifting boom, order 7480 Hook and Yoke Assembly
114 lbs
$622.00
9051
ASSEMBLY HARDWARE PACKAGE. Allows Boom to be mounted on ASAE 3-point Hitch tractors, Category I or II pin size, Category I width only.
9 lbs
73.00
9052
ASSEMBLY HARDWARE PACKAGE. Allows Boom to be mounted on ASAE 3-point Hitch tractors, Category II pin size, Category II width only.
12 lbs
112.00
8900 HYDRAULIC DIGGER ACCESSORIES
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
7480
HOOK AND YOKE ASSEMBLY. Use with 9049 Crane Boom for lifting up to 750 lbs
10 lbs
$152.00
7270
AUGER ADAPTER GUARD. Furnished with Model 8900-4 and 8900-7. Required on all machines with 2-9/16” round spindle with 2-3/8” diameter center column augers.
8 lbs
46.00 NET
9545
AUGER ADAPTER GUARD. Furnished with Model 8900-8. Required on all machines with 2”
hex spindle and/or 3-5/8” diameter center column augers.
9 lbs
104.00 NET
9079
DOWN FORCE PACKAGE. Complete with relief and automatic dump valve. Fits Model 8900
when equipped with a 9049 Crane Boom. (Less Hoses)
51 lbs
740.00
9079 NOTE
Tractor must be equipped w/ remote outlets and either a three-way valve (as used in operation of a single-acting cylinder) or
a four-way valve (as used in the operation of a double-acting cylinder).
(Need one hose to a pressurized outlet and one hose to the sump or reservoir.)
JANUARY 2014
GST # R101743045
Sheet 203
U. S. PRODUCT
www.danuser.com
DANUSER AUGERS 2” ROUND – DOUBLE FLIGHT
DANUSER DIGGER MODELS G20/40, 8300 (1 & 2), & 8800 (1 & 2)
▲ 40" Hole Depth
▲ 40" Hole Depth
40" Hole Depth
(Plain Edges)
(Serrated Edges)
(Hole Digger Head)
AUGER
PART
SIZE
NO.
LIST PRICE
PART
WEIGHT
FRT EXTRA
WEIGHT
LIST PRICE
FRT EXTRA
PART
LIST PRICE
4"
6101
19 lbs.
$229.00
NO.
N/A
--
---
NO.
N/A
WEIGHT
FRT EXTRA
--
---
6”
6029
29 lbs.
244.00
N/A
--
---
6121
34 lbs.
$423.00
9”
6030
39 lbs.
288.00
6031
39 lbs.
$290.00
6122
45 lbs.
461.00
12”
6032
51 lbs.
338.00
6033
51 lbs.
344.00
6123
58 lbs.
514.00
14”
6034
65 lbs.
406.00
6035
65 lbs.
411.00
6124
71 lbs.
631.00
16”
6036
72 lbs.
475.00
6037
69 lbs.
484.00
6125
77 lbs.
756.00
18”
24"
6038
6040
66 lbs.
91 lbs.
520.00
600.00
6039
6041
65 lbs.
91 lbs.
528.00
611.00
6358
N/A
85 lbs
--
950.00
---
DANUSER STEPPED AUGERS – 2” ROUND - DOUBLE FLIGHT
TREE PLANTING OR LANDSCAPING APPLICATIONS
** LIST PRICES F.O.B. MONCTON, NB **
18” X 10”
▲33” HOLE DEPTH
(Serrated Edges)
▲33” HOLE DEPTH
(Plain Edges)
AUGER
SIZE
PART NO.
WEIGHT
LIST PRICE
FRT EXTRA
PART NO.
WEIGHT
LIST PRICE
FRT EXTRA
6240
73 lbs.
$513.00
6248
72 lbs.
$526.00
▲40” HOLE DEPTH
(Plain Edges)
▲40” HOLE DEPTH
(Serrated Edges)
24” x 12”
6241
113 lbs.
647.00
6249
112 lbs.
660.00
30” x 16”
6242
165 lbs.
923.00
6250
164 lbs.
942.00
DANUSER ORCHARD AUGERS – 2” ROUND – DOUBLE FLIGHT
▲29” HOLE DEPTH
(Serrated Edges)
AUGER
SIZE
JANUARY 2014
18”
PART
NO.
6256
WEIGHT
64 lbs.
24”
6255
86 lbs.
LIST PRICE
FRT EXTRA
$454.00
511.00
GST # R101743045
Sheet 203
KEY:
(#) Indicates that these augers have 3-5/8” columns. If the customer’s digger has a factory installed 7270 Auger
Adapter Guard, it will cover all 2-3/8” center column augers. ADDITIONALLY, the customer will need a
9545 Auger Adapter Guard when using 3-5/8” center column augers. Should the digger not be equipped with
an Auger Adapter Guard, the customer must purchase 7270 Auger Adapter Guard OR 9545 Auger Adapter Guard.
*
Indicates single flight construction.
(a) Includes Auger Adapter Guard.
U. S. PRODUCT
www.danuser.com
▲33” HOLE DEPTH
(Serrated Edges)
▲33” HOLE DEPTH
(Plain Edges)
AUGER
SIZE
PART NO.
18” X 10”
9611
WEIGHT
76 lbs.
▲40” HOLE DEPTH
(Plain Edges)
LIST PRICE
FRT EXTRA
PART NO.
$608.00
9615
LIST PRICE
FRT EXTRA
WEIGHT
75 lbs.
▲40” HOLE DEPTH
(Serrated Edges)
$620.00
24” x 12”
9612
120 lbs.
725.00
9616
119 lbs.
752.00
30” x 16”
9613
169 lbs.
1,001.00
9617
168 lbs.
1,028.00
DANUSER ORCHARD AUGERS – 2- 9/16” ROUND – DOUBLE FLIGHT
DANUSER DIGGER MODELS F8, 8200-5, 8900-4, & 8900-7
▲29” HOLE DEPTH
(Serrated Edges)
AUGER
SIZE
PART
NO.
WEIGHT
LIST PRICE
FRT EXTRA
18”
9850
64 lbs.
$511.00
24”
9849
130 lbs.
581.00
DANUSER HOLE DIGGER HEAD AUGERS – 2- 9/16” ROUND – DOUBLE FLIGHT
72” HOLE DEPTH
52” HOLE DEPTH
AUGER
SIZE
PART NO.
WEIGHT
LIST PRICE
FRT EXTRA
PART NO.
WEIGHT
LIST PRICE
FRT EXTRA
16”
18”
*9359
*9361
100 lbs.
139 lbs.
$1,002.00
1,309.00
9331
9332
131 lbs.
182 lbs..
$1,101.00
1,484.00
24”
(#)*9363
131 lbs.
1,374.00
---
---
30”
(#)*9365
181 lbs.
1,571.00
---
---
DANUSER HOLE DIGGER HEAD AUGERS – 2” HEX – SINGLE & DOUBLE FLIGHT
DANUSER DIGGER MODELS 8200-9 & 8900-8
AUGER
SIZE
6”
9”
10”
12”
14”
16”
18”
24”
30”
36”
JANUARY 2014
72” HOLE DEPTH
40” HOLE DEPTH
PART NO.
WEIGHT
LIST PRICE
FRT EXTRA
PART NO.
WEIGHT
9902
9903
9904
9905
9906
*9571
*9572
(#)*9573
(#)*9574
(#)*9575
47 lbs.
53 lbs.
60 lbs.
70 lbs.
87 lbs.
78 lbs.
102 lbs.
106 lbs.
144 lbs.
263 lbs.
$551.00
604.00
620.00
651.00
763.00
1,000.00
1,158.00
1,206.00
1,542.00
2,040.00
--9706
9707
9708
9709
9710
9711
-------
--101 lbs.
114 lbs.
131 lbs.
156 lbs.
133 lbs.
190 lbs.
-------
LIST PRICE
FRT EXTRA
$787.00
880.00
1,018.00
1,146.00
1,230.00
1,590.00
GST # R101743045
Sheet 203
DANUSER STEPPED AUGERS – 2- 9/16” ROUND – DOUBLE FLIGHT
U. S. PRODUCT
HOLE DIGGER HEADS
www.danuser.com
SIZE
PART
NO.
WEIGHT
FOB
FACTORY
SIZE
PART
NO.
WEIGHT
LIST PRICE
FRT EXTRA
6”
9386
10 lbs.
$234.00
16”
9310
26 lbs.
$400.00
9”
10”
9306
9307
18 lbs.
18 lbs.
274.00
277.00
18”
24”
9311
9312
29 lbs.
35 lbs.
505.00
687.00
12”
9308
21 lbs.
283.00
30”
9313
42 lbs.
794.00
14”
9309
24 lbs.
315.00
36”
9416
56 lbs.
918.00
DANUSER HOLE DIGGER HEADS (SHIPPED WITH AUGER EXTENSION GUARDS)
Part #
Description
Size
Weight
LIST PRICE
FRT EXTRA
6080G
Auger Extension – for 2” round spindle diggers
7”
13 lbs.
$104.00
6204G
14”
24 lbs.
137.00
6207G
21”
30 lbs.
158.00
(a) 1849G
Auger Extension – for 2-9/16” round spindle diggers
7”
30 lbs.
191.00
7494G
14”
34 lbs.
168.00
7663G
21”
44 lbs.
199.00
9486G
48”
79 lbs.
306.00
9489G
72”
115 lbs.
376.00
Auger Extension – for 2” hex spindle diggers
7”
29 lbs.
263.00
9623G
14”
29 lbs.
9624G
NOTE: On 24”, 30” and 36” hex augers the above extension will also serve as the 14”
extension.
(a) 9622G
9629G
231.00
274.00
21”
35 lbs.
420.00
NOTE: On 24”, 30”, and 36” hex augers the above extension will also serve as a 28”,
35”, 42” and 49” extension.
56”
86 lbs.
9484G
72”
72 lbs.
541.00
(a) 9855G
Auger Adapter – for 2-9/16” round to 2” hex
7”
23 lbs.
253.00
(a) 9675G
Auger Adapter – for 2” hex to 2-9/16” round
7”
31 lbs.
306.00
Weight
Net Price
Part #
Auger Extension Guards
6269
Extension Guard – for use with 2” round, 7” extension
3 lbs.
$27.00 NET
6270
Extension Guard – for use with 2” round, 14” extension and longer
6 lbs.
36.00 NET
Extension Guard – for use with 2-9/16” round and 2” hex, 7” extension
14 lbs.
90.00 NET
Extension Guard – for use with 2-9/16” round and 2” hex, 14” extension and longer
6 lbs.
36.00 NET
(a) 6271
6272
DRIVER PTO CONVERSION KITS & DRIVER ACCESSORIES
LIST PRICE
FRT EXTRA
3209
Long Driveline Kit - 14 3/4”
23
457.00
3210
Medium Driveline Kit - 11 3/8”
21
446.00
3211
Short Driveline Kit - 9 3/8”
21
434.00
2201
Post Guide Sleeve - 2 1/16” I.D. For Metal Posts
11
123.00
2781
Auxiliary Weight - Additional Weight For Tough Conditions
56
216.00
2876
Storage Support Stand - Use With Either MD6 or MDH1
20
224.00
3044
Storage Support Stand - Use With BMHD
21
224.00
3191
Driver Weight Guard Kit - Required On All Machines
7
79.00
JANUARY 2014
GST # R101743045
Sheet 203
WITH REMOVABLE TEETH FOR FIELD WELDING TO AUGER
U. S. PRODUCT
www.danuser.com
40” HOLE DEPTH
▲Plain Edges
AUGER
SIZE
PART
NO.
WGT
▲Serrated Edges
LIST PRICE
FRT EXTRA
AUGER
SIZE
PART
NO.
--46 lbs.
51 lbs
62 lbs
74 lbs.
83 lbs.
87 lbs.
94 lbs.
133 lbs.
182 lbs.
4"
450
25 lbs
$318.00
4”
N/A
6"
9"
10"
12"
14"
16"
18"
24"
30"
36"
417
1551
288
412
451
7650
1275
1270
7857
9618
39 lbs
46 lbs
50 lbs
62 lbs
75 lbs
84 lbs
87 lbs
94 lbs
133 lbs
169 lbs
351.00
360.00
384.00
409.00
471.00
558.00
648.00
700.00
968.00
1,421.00
6”
9”
10”
12”
14”
16”
18”
24”
30”
36”
N/A
1552
487
488
489
7665
1276
1272
7935
9614
WGT
Hole Digger Head
LIST PRICE
FRT EXTRA
----$365.00
391.00
415.00
481.00
563.00
655.00
710.00
981.00
1,428.00
(36” Auger has 30” & 9” cutting edges. Refer to
Part No. 9412 for heavy industrial use.)
AUGER
SIZE
PART
NO.
4”
N/A
--
6”
9”
10”
12”
14”
16”
18”
24”
30”
36”
9387
9314
9315
9316
9317
9318
9319
(#)9320
(#)9321
(#)9412
44 lbs
52 lbs
57 lbs
69 lbs
85 lbs
94 lbs
125 lbs
150 lbs
207 lbs
264 lbs
WGT
LIST PRICE
FRT EXTRA
--$530.00
545.00
564.00
593.00
714.00
855.00
1,147.00
1,407.00
1,781.00
1,990.00
(36” Auger has 30” & 9” cutting edges. Refer
to Part No. 9412 for heavy industrial use
52” HOLE DEPTH
▲ Plain Edges
AUGER
SIZE
PART
NO.
WGT
9”
10”
12”
7476
7478
7419
60 lbs
67 lbs
83 lbs
14”
16”
7437
7661
101 lbs
116 lbs
Serrated Edges
LIST PRICE
FRT EXTRA
AUGER
SIZE
PART
NO.
WGT
$426.00
453.00
513.00
9"
10"
12"
7497
7498
7499
60 lbs
67 lbs
82 lbs
586.00
700.00
14"
16"
7519
7734
101 lbs
116 lbs
Hole Digger Head
LIST PRICE
FRT EXTRA
LIST PRICE
FRT EXTRA
AUGER
SIZE
PART
NO.
WGT
$428.00
456.00
519.00
9"
10"
12"
9322
9323
9324
71 lbs
75 lbs
94 lbs
$646.00
677.00
754.00
592.00
708.00
14"
16"
9325
9326
114 lbs
126 lbs
915.00
1,105.00
72” HOLE DEPTH
▲Plain Edges
AUGER
SIZE
PART
NO.
WGT
9”
10”
12”
14”
16”
18”
7846
7848
7850
7852
7854
7604
95 lbs
101 lbs
125 lbs
151 lbs
167 lbs
238 lbs
JANUARY 2014
▲Serrated Edges
LIST PRICE
FRT EXTRA
$687.00
747.00
772.00
827.00
907.00
1,041.00
AUGER
SIZE
PART
NO.
WGT
9"
10"
12"
14"
16"
18”
7936
7937
7938
7939
7940
7605
95 lbs
101 lbs
125 lbs
151 lbs
168 lbs
238 lbs
Hole Digger Head
LIST PRICE
FRT EXTRA
$693.00
752.00
779.00
832.00
916.00
1,051.00
AUGER
SIZE
PART NO.
9”
10"
12"
14"
16"
18"
9327
9328
9329
9330
N/A
N/A
WGT
99 lbs
106 lbs
128 lbs
155 lbs
-----
LIST PRICE
FRT EXTRA
$717.00
804.00
872.00
1,018.00
----
GST # R101743045
Sheet 203
DANUSER HOLE DIGGER HEAD AUGERS – 2- 9/16” ROUND – DOUBLE FLIGHT
U. S. PRODUCT
www.danuser.com
EP HEAVY DUTY AUGER SERIES
Lifetime warranty against output pull out (no snap rings)
One-piece forged output and carrier assembly (no internal spline connection to fail)
One-piece forged steel output housing (no casting to break)
Utility-style housing with integrated ears makes it extremely strong
Gearbox oil check and fill plugs are easily located (no disassembly required)
No case drain required
Extremely low maintenance
Tapered roller bearings
All rotating parts are completely sealed and running in oil
Heavy-duty, high strength 1- 1/4” knuckle pins zinc plated to resist rust
Robotically-welded housing
Extremely tough powder coated paint
Mounts available for Skid-Steers, Backhoes, Excavators, Mini-Excavators, Tractor
Loaders, Telescopic Handlers, Articulated Loaders & Integrated Tool Carriers
To arrive at complete price, take Digger $_____ + Adapter Kit $____ + Auger (2” Hex Spindle Auger) $____ + Accessories $____ = Total
List Price.
PART
NUMBER
DESCRIPTION
WGT
10180 / 2” Hex
Model EP6– digger with 2” Hex or 2-9/16” RD output spindle, 6-15 gpm, maximum hydraulic
pressure of 3000 psi, maximum hydraulic back pressure of 1500 psi, maximum auger diameter
of 24”. (less auger, hoses and mount kit)
138 lbs
$1,487.00
Model EP10- digger with 2” Hex or 2-9/16” RD output spindle, 10-20 gpm, maximum hydraulic
139 lbs
1,599.00
Model EP15– digger with 2” Hex or 2-9/16” RD output spindle, 15-30 gpm, maximum hydraulic
140 lbs
1,678.00
Model EP20 - digger with 2” Hex or 2-9/16” RD output spindle, 20-35 gpm, maximum hydraulic
140 lbs
20180 / 2-9/16” RD
10181 / 2” Hex
20181 / 2-9/16” RD
10182 / 2” Hex
20182 / 2-9/16” RD
20001 / 2” Hex
20184 / 2-916” RD
JANUARY 2014
LIST PRICE
FRT EXTRA
1,807.00
GST # R101743045
Sheet 203
•
•
•
•
•
•
•
•
•
•
•
•
•
U. S. PRODUCT
www.danuser.com
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
10047
Cross port relief valve (required for pressures exceeding 3000 psi)
7 lbs
$388.00
10050
1/2” Hose Kit with flat face ISO couplers (hoses are 96” long with abrasion sleeves)
14 lbs
228.00
10051
3/4” Hose Kit with flat face ISO couplers (hoses are 96” long with abrasion sleeves & required for
20 gpm or more)
19 lbs
316.00
10043
1/2” Hose Kit (includes fittings NOT couplers) (hoses are 96” long with abrasion sleeves)
9 lbs
152.00
10044
3/4” Hose Kit (includes fittings NOT couplers) (hoses are 96” long with abrasion sleeves & required for 20 gpm or more)
14 lbs
239.00
SKID-STEER QUICK ATTACH
PART
NUMBER
10488
DESCRIPTION
Mounting Kit (includes knuckle and cradle) attaches Drive Unit to skid-steer with Standard 2-pin
system and SAE quick couplers
WEIGHT
128 lbs
LIST PRICE
FRT EXTRA
$432.00
OFFSET FRONT-END LOADER QUICK ATTACH
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
20652
Quick attach plate offset w/ hardware
72 lbs
$388.00
20653
Euro/Global offset w/ hardware
86 lbs
416.00
BOLT-ON BUCKET MOUNT
PART
NUMBER
DESCRIPTION
WEIGHT
10489
Mounting Kit (includes knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware.
43 lbs
JANUARY 2014
LIST PRICE
FRT EXTRA
$292.00
GST # R101743045
Sheet 203
DRIVER ACCESSORIES
U. S. PRODUCT
www.danuser.com
Less dipperstick pin. For dipperstick widths up to 13”.
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
10296
1 5/8” Bucket Pin Diameter
49 lbs
$436.00
10231
49 lbs
436.00
10481
45 mm Bucket Pin Diameter
50 lbs
436.00
10232
50 lbs
436.00
10233
48 lbs
436.00
Weld Mtn
Welded mount w/ fixed width
50 lbs
550.00
SMALLER BACKHOE & MINI-EXCAVATOR MOUNT KITS
PART
NUMBER
10201
10201
10202
10203
10204
10204
10205
10206
10298
10207
10208
10209
10210
DESCRIPTION
1” Bucket Pin Diameter
WEIGHT
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
46 lbs
46 lbs
46 lbs
46 lbs
LIST PRICE
FRT EXTRA
$289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
QUICK ATTACH MOUNTING KITS
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
10172
Cat 420D & 420E (pin grabber)
75 lbs
$750.00
10173
JCB 208S, 803 & 8018
40 lbs
623.00
10174
JD 790ELC
172 lbs
1,163.00
10175
JD 135C RTS
82 lbs
717.00
20200
JD 35D Mini-Ex (wedge)
60 lbs
467.00
20201
60 lbs
467.00
20210
Yanmar Vio40/45/50/55 (quick coupler)
43 lbs
631.00
10176
Yanmar VIO27 & VIO35 (quick coupler)
45 lbs
620.00
10177
Yanmar VIO40, VIO45, VIO55 & VIO50 (quick coupler)
50 lbs
631.00
20007
Kubota KX161-3 & U45
60 lbs
467.00
20008
Kubota KX121
60 lbs
467.00
20026
Kubota KX057 & U55
60 lbs
467.00
20202
Bobcat X-Change
55 lbs
522.00
CUSTOM MOUNTS - CALL FOR PRICING
JANUARY 2014
GST # R101743045
Sheet 203
TLB (BACKHOE & EXCAVATOR MOUNTING KIT)
U. S. PRODUCT
www.danuser.com
WOBBLE AUGERS
•
•
•
•
•
•
•
These augers pushes through dirt, sand, clay, asphalt, compacted rock & embedded rock.
No loose dirt in the bottom of the hole
No excess dirt to fall back into the hole
No dirt to remove around the top of the hole
Compacted hole ready for concrete
Suggested mounting to skid-steers, front-end loaders, backhoes, excavators, mini-excavators, telescopic handlers, articulated loaders, and integrated
tool carriers
Requires down force for correct operation
Not for 3-point hitch mounted diggers
Note: 9” Wobble auger should be used on a machine with an Operating Load or Rated Operating Capacity of 2250 lbs or greater, utilizing an
auger drive with 2000 ft.-lbs of torque or greater.
WOBBLE AUGERS
AUGER
SIZE
2” Hex
Part #
LIST PRICE
FRT EXTRA
WGT
LIST PRICE
FRT EXTRA
AUGER SIZE
2-9/16”
Part #
58 lbs
$ 320.00
86 lbs
115 lbs
404.00
618.00
4"
20600
58 lbs
$320.00
4”
20601
6"
9"
20603
20606
86 lbs
115 lbs
404.00
618.00
6”
9”
20604
20607
WGT
FISHTAIL POINTS
JANUARY 2014
Part #
Description
10331
Dirt
10332
Hard-surface
10335
Carbide
LIST PRICE
FRT EXTRA
$32.00
69.00
119.00
GST # R101743045
Sheet 203
•
U. S. PRODUCT
www.danuser.com
FAB AUGERS
•
•
•
•
Fabricated Boring Head
Hardened Bolt-on Teeth– Std. Incl. Gage Teeth in Outside Positions &
Wisdom Teeth in Inside Positions
Hardened Fishtail Point
5/16” Heavy-Duty Double Flighting
4FT Length Fab Augers - Standard
2” Hex
Auger #
2-9/16” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
LIST PRICE
FRT EXTRA
10600
10601
4”
0
42 lbs
$242.00
10603
10604
6”
2
46 lbs
257.00
10606
10607
8”
2
78 lbs
371.00
10609
10610
9”
3
85 lbs
384.00
10612
10613
10”
3
98 lbs
425.00
10615
10616
12”
4
115 lbs
438.00
10618
10619
15”
5
135 lbs
606.00
10621
10622
16”
5
146 lbs
627.00
10624
10625
18”
6
170 lbs
707.00
10627
10628
20”
6
182 lbs
876.00
10630
10631
24”
8
211 lbs
909.00
10633
10634
30”
9
272 lbs
1,165.00
10636
10637
36”
11
365 lbs
1,480.00
DIAMETER
NO. OF
TEETH
WEIGHT
3FT Length Fab Augers
JANUARY 2014
2” Hex
Auger #
2-9/16” RD
Auger #
LIST PRICE
FRT EXTRA
10600-3
10601-3
4”
0
42 lbs
$236.00
10603-3
10604-3
6”
2
42 lbs
247.00
10606-3
10607-3
8”
2
57 lbs
348.00
10609-3
10610-3
9”
3
62 lbs
360.00
10612-3
10613-3
10”
3
69 lbs
382.00
10615-3
10616-3
12”
4
78 lbs
399.00
10618-3
10619-3
15”
5
87 lbs
528.00
10621-3
10622-3
16”
5
93 lbs
561.00
10624-3
10625-3
18”
6
106 lbs
590.00
10627-3
10628-3
20”
6
134 lbs
685.00
10630-3
10631-3
24”
8
153 lbs
808.00
10633-3
10634-3
30”
9
208 lbs
1,033.00
10636-3
10637-3
36”
11
275 lbs
1,291.00
GST # R101743045
Sheet 203
FABRICATED AUGERS– LIGHT TO MODERATE GROUND CONDITIONS
U. S. PRODUCT
www.danuser.com
FAB AUGERS
•
•
•
•
2” Hex
Auger #
2-9/16” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
LIST PRICE
FRT EXTRA
10600-5
10601-5
4”
0
51 lbs
$292.00
10603-5
10604-5
6”
2
51 lbs
348.00
10606-5
10607-5
8”
2
101 lbs
466.00
10609-5
10610-5
9”
3
111 lbs
472.00
10612-5
10613-5
10”
3
126 lbs
539.00
10615-5
10616-5
12”
4
145 lbs
545.00
10618-5
10619-5
15”
5
164 lbs
741.00
10621-5
10622-5
16”
5
177 lbs
848.00
10624-5
10625-5
18”
6
207 lbs
926.00
10627-5
10628-5
20”
6
254 lbs
1,022.00
10630-5
10631-5
24”
8
268 lbs
1,094.00
10633-5
10634-5
30”
9
445 lbs
1,655.00
10636-5
10637-5
36”
11
501 lbs
1,813.00
DIAMETER
NO. OF
TEETH
WEIGHT
JANUARY 2014
2” Hex
Auger #
2-9/16” RD
Auger #
LIST PRICE
FRT EXTRA
10600-6
10601-6
4”
0
60 lbs
$326.00
10603-6
10604-6
6”
2
60 lbs
449.00
10606-6
10607-6
8”
2
128 lbs
545.00
10609-6
10610-6
9”
3
141 lbs
561.00
10612-6
10613-6
10”
3
160 lbs
629.00
10615-6
10616-6
12”
4
186 lbs
685.00
10618-6
10619-6
15”
5
193 lbs
904.00
10621-6
10622-6
16”
5
208 lbs
1,027.00
10624-6
10625-6
18”
6
244 lbs
1,111.00
10627-6
10628-6
20”
6
296 lbs
1,274.00
10630-6
10631-6
24”
8
325 lbs
1,476.00
10633-6
10634-6
30”
9
527 lbs
2,082.00
10636-6
10637-6
36”
11
615 lbs
2,351.00
GST # R101743045
Sheet 203
U. S. PRODUCT
www.danuser.com
CAST HEAD AUGERS– DIFFICULT GROUND CONDITIONS
CAST AUGERS
•
•
•
•
Cast Steel Boring Head
4FT Length Cast Augers - Standard
2” Hex
Auger #
2-9/16” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
LIST PRICE
FRT EXTRA
10657
10658
6”
2
48 lbs
$391.00
10660
10661
8”
4
83 lbs
560.00
10663
10664
9”
4
89 lbs
606.00
10666
10667
10”
4
102 lbs
627.00
10669
10670
12”
4
117 lbs
647.00
10672
10673
15”
6
139 lbs
814.00
10675
10676
16”
6
148 lbs
873.00
10678
10679
18”
6
168 lbs
959.00
10681
10682
20”
6
231 lbs
1,336.00
10684
10685
24”
8
210 lbs
1,376.00
10687
10688
30”
10
280 lbs
1,759.00
10690
10691
36”
12
376 lbs
2,056.00
DIAMETER
NO. OF
TEETH
WEIGHT
3FT Length Cast Augers
2” Hex
Auger #
JANUARY 2014
2-9/16” RD
Auger #
LIST PRICE
FRT EXTRA
10657-3
10658-3
6”
2
40 lbs
$376.00
10660-3
10661-3
8”
4
67 lbs
511.00
10663-3
10664-3
9”
4
70 lbs
545.00
10666-3
10667-3
10”
4
74 lbs
550.00
10669-3
10670-3
12”
4
81 lbs
578.00
10672-3
10673-3
15”
6
90 lbs
730.00
10675-3
10676-3
16”
6
96 lbs
769.00
10678-3
10679-3
18”
6
108 lbs
864.00
10681-3
10682-3
20”
6
122 lbs
1,162.00
10684-3
10685-3
24”
8
154 lbs
1,212.00
10687-3
10688-3
30”
10
209 lbs
1,538.00
10690-3
10691-3
36”
12
276 lbs
1,678.00
GST # R101743045
Sheet 203
U. S. PRODUCT
www.danuser.com
CAST AUGERS
•
•
•
•
2” Hex
Auger #
2-9/16” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
LIST PRICE
FRT EXTRA
10657-5
10658-5
6”
2
62 lbs
$489.00
10660-5
10661-5
8”
4
121 lbs
629.00
10663-5
10664-5
9”
4
125 lbs
662.00
10666-5
10667-5
10”
4
143 lbs
752.00
10669-5
10670-5
12”
4
158 lbs
769.00
10672-5
10673-5
15”
6
167 lbs
887.00
10675-5
10676-5
16”
6
180 lbs
909.00
10678-5
10679-5
18”
6
209 lbs
1,010.00
10681-5
10682-5
20”
6
241 lbs
1,386.00
10684-5
10685-5
24”
8
269 lbs
1,532.00
10687-5
10688-5
30”
10
374 lbs
1,930.00
10690-5
10691-5
36”
12
502 lbs
2,149.00
DIAMETER
NO. OF
TEETH
WEIGHT
2” Hex
Auger #
JANUARY 2014
2-9/16” RD
Auger #
LIST PRICE
FRT EXTRA
10657-6
10658-6
6”
2
70 lbs
$533.00
10660-6
10661-6
8”
4
138 lbs
702.00
10663-6
10664-6
9”
4
140 lbs
735.00
10666-6
10667-6
10”
4
146 lbs
786.00
10669-6
10670-6
12”
4
189 lbs
803.00
10672-6
10673-6
15”
6
196 lbs
977.00
10675-6
10676-6
16”
6
212 lbs
1,151.00
10678-6
10679-6
18”
6
246 lbs
1,167.00
10681-6
10682-6
20”
6
284 lbs
1,543.00
10684-6
10685-6
24”
8
327 lbs
1,717.00
10687-6
10688-6
30”
10
529 lbs
2,267.00
10690-6
10691-6
36”
12
616 lbs
2,508.00
GST # R101743045
Sheet 203
U. S. PRODUCT
www.danuser.com
2” Hex
Auger #
2-9/16” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
LIST PRICE
FRT EXTRA
10700
10701
4.5”
4
73 lbs
$882.00
10703
10704
6”
6
66 lbs
1,321.00
10706
10707
7”
8
80 lbs
1,361.00
10709
10710
8”
8
94 lbs
1,495.00
10712
10713
9”
8
103 lbs
1,516.00
10715
10716
10”
10
113 lbs
1,557.00
10718
10719
12”
12
135 lbs
1,706.00
10721
10722
14”
14
160 lbs
1,928.00
10724
10725
16”
16
183 lbs
1,995.00
10727
10728
18”
18
208 lbs
2,150.00
10730
10731
24”
22
291 lbs
2,562.00
10733
10734
30”
24
340 lbs
2,831.00
10736
10737
36”
30
395 lbs
3,208.00
10758
Bullet Rock Pilot
10759
Bullet Rock Tooth
416.00
12.00
TREE AUGERS– TREE AND SHRUB PLANTING
2” Hex
Auger #
2-9/16’ RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
LIST PRICE
FRT EXTRA
10639
10640
18”-9”
7
129 lbs
$661.00
10642
10643
24”-12”
10
186 lbs
877.00
10645
10646
30”-15”
11
230 lbs
1,091.00
10648
10649
36”-18”
13
305 lbs
1,311.00
•
•
•
•
•
•
JANUARY 2014
TREE AUGERS
Hardened Bolt-on Teeth– Std. Incl. Gage Teeth in
Outside Positions & Wisdom Teeth in Inside Positions
Heavy-Duty Double Flighting
2” Hex, 2 9/16” Rd. and 2” Rd. collars available
4’ Standard Length
GST # R101743045
Sheet 203
BULLET ROCK AUGERS - ROCK, ASPHALT, & FROZEN GROUND - 4FT Length
U. S. PRODUCT
www.danuser.com
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
10331
Fishtail Point– Dirt
$32.00
10332
Fishtail Point– Hard-faced
10335
Fishtail Point– Carbide
119.00
10333
Point for 4” Auger– Dirt
59.00
10334
Point for 4” Auger– Hard-faced
101.00
10336
Point for 4” Auger– Carbide
134.00
10340
Gage Tooth– Dirt
4.00
10341
Gage Tooth-Hard-faced
9.00
10337
Wisdom Tooth-Dirt
4.00
10338
Wisdom Tooth-Hard-faced
10339
Wisdom Tooth-Carbide
10342
10343
Chisel Tooth– Dirt
Chisel Tooth-Hard-faced
10344
Chisel Tooth– Carbide
69.00
9.00
22.00
4.00
9.00
16.00
ADAPTERS , POINTS & EXTENSIONS
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
VARIABLE LENGTH EXTENSIONS:
10900
2” Hex - 24” long variable length extension
32 lbs
231.00
10901
56 lbs
317.00
10902
84 lbs
412.00
10903
2-9/16” - 12” long variable length extension
22 lbs
169.00
10904
38 lbs
236.00
10905
73 lbs
326.00
10906
84 lbs
432.00
21 lbs
167.00
FIXED LENGTH EXTENSIONS
10910
2” Hex - 12” long fixed length extension
10911
32 lbs
202.00
10912
56 lbs
283.00
10913
84 lbs
372.00
10914
2-9/16” - 12” long fixed length extension
38 lbs
167.00
10915
40 lbs
202.00
10916
76 lbs
283.00
10917
110 lbs
392.00
$236.00
ADAPTERS
10921
2” Hex drive unit - 2-9/16” round auger collar
18 lbs
10922
2” Hex drive unit - 2’ round auger collar
18 lbs
217.00
10923
2-9/16” round drive unit - 2” Hex auger collar
14 lbs
143.00
10924
2-9/16” round drive unit - 2” round auger collar
12 lbs
151.00
JANUARY 2014
GST # R101743045
Sheet 203
POINTS AND TEETH FOR AUGER
U. S. PRODUCT
www.danuser.com
Euro Offset Mount
EP Series
Quick Attach Mount
8900 Series
Quick Attach Mount
PRO Series
Euro Offset Mount
8900 Series
DESCRIPTION
Euro Offset Mount
PRO Series
PART
NUMBER
20652
20653
Quick Attach plate offset with hardware - EP Series mount
Euro Offset with hardware - EP Series mount
73 lbs
85 lbs
LIST PRICE
FRT EXTRA
$388.00
416.00
20654
20655
Quick Attach plate offset with - 8900 Series with knuckle
Euro Offset - 8900 Series with Knuckle
79 lbs
90 lbs
388.00
416.00
20656
20657
Quick Attach plate offset with hardware - PRO Series mount
Euro Offset with hardware - Pro Series mount
74 lbs
86 lbs
388.00
416.00
JANUARY 2014
WEIGHT
GST # R101743045
Sheet 203
Quick Attach Mount
EP Series
OFFSET AUGER MOUNTS
U. S. PRODUCT
www.danuser.com
•
•
•
•
•
5-year warranty - the industry’s best warranty with American components
Planetary gears are large in diameter and thicker for a stronger, longer-lasting unit
American-made planetary utilizes bearing nut with lock tab washer for added strength
Hoses routed out the top allow you to dig deeper and in tighter locations
High-torque drive units range from 6-60 gpm at 1500 to 5000 psi
To arrive at complete price, take Digger $_____ + Adapter Kit $____ + Auger (2” Hex Spindle Auger) $____ + Accessories
$____ = Total List Price.
PART
NUMBER
DESCRIPTION
WGT
10062 / 2” Hex
Model 615– digger with 2” Hex or 2-9/16” RD output spindle, 6-15 gpm, maximum hydraulic
154 lbs
$2,075.00
Model 1025- digger with 2” Hex or 2-9/16” RD output spindle, 10-25 gpm, maximum hydraulic
156 lbs
2,075.00
Model 1530– digger with 2” Hex or 2-9/16” RD output spindle, 15-30 gpm, maximum hydraulic
157 lbs
2,243.00
Model 2035 - digger with 2” Hex or 2-9/16” RD output spindle, 20-35 gpm, maximum hydraulic
159 lbs
2,468.00
10061 / 2-9/16” RD
10011 / 2” Hex
10010 / 2-9/16” RD
10016 / 2” Hex
10015 / 2-9/16” RD
10021 / 2” Hex
10020 / 2-916” RD
LIST PRICE
FRT EXTRA
Hoses are 96” long with abrasion sleeves / 3/4” hoses REQUIRED for 20 gpm or more
10047
Cross port relief valve - (required for pressure exceeding 3000 psi)
7 lbs
388.00
10050
1/2” hose kit with flat face ISO couplers
14 lbs
228.00
10051
3/4” hose kit with flat face ISO couplers
19 lbs
316.00
10171
3/4” hose kit with flat face ISO couplers - (for models 2545H & 3065H, not to exceed 45 gpm)
19 lbs
316.00
10043
1/2” hose kit (includes fittings NOT couplers)
9 lbs
152.00
10044
3/4” hose kit (includes fittings NOT couplers)
14 lbs
239.00
JANUARY 2014
GST # R101743045
Sheet 203
PRO PROFESSIONAL AUGER SERIES
U. S. PRODUCT
www.danuser.com
PRO PROFESSIONAL AUGER SERIES
PART
NUMBER
10075
10076
10077
10078
DESCRIPTION
WGT
LIST PRICE
FRT EXTRA
Model 2545H– digger with 2” Hex output spindle, 25-45 gpm, maximum hydraulic pressure of
3000 psi, maximum hydraulic back pressure of 400 psi, NO DRAIN LINE REQUIRED, maximum auger diameter of 48”. (less auger, hoses and mount kit)
226 lbs
$4,000.00
Model 3060H- digger with 2” Hex output spindle, 30-60 gpm, maximum hydraulic pressure of
3000 psi, maximum hydraulic back pressure of 400 psi, NO DRAIN LINE REQUIRED, maximum auger diameter of 48”. (less auger, hoses and mount kit)
235 lbs
4,236.00
Model HP-2545H– digger with 2” Hex output spindle, 25-45 gpm, maximum hydraulic pressure
of 5000 psi, maximum hydraulic back pressure of 400 psi, NO DRAIN LINE REQUIRED, maximum auger diameter of 48”. (less auger, hoses and mount kit)
242 lbs
4,640.00
Model HP-3060H - digger with 2” Hex output spindle, 30-60 gpm, maximum hydraulic pressure
of 5000 psi, maximum hydraulic back pressure of 400 psi, NO DRAIN LINE REQUIRED, maximum auger diameter of 48”. (less auger, hoses and mount kit)
245 lbs
4,864.00
HOSE KITS ARE NOT AVAILABLE FOR THE HP MODELS.
SKID STEER QUICK ATTACH
PART
NUMBER
DESCRIPTION
WEIGHT
10499
Mounting Kit (includes knuckle & cradle) attaches the Drive Unit to skid-steers with Standard 2-pin
system and SAE quick couplers.
129 lbs
JANUARY 2014
LIST PRICE
FRT EXTRA
$432.00
GST # R101743045
Sheet 203
To arrive at complete price, take Digger $_____ + Adapter Kit $____ + Auger (2” Hex Spindle Auger) $____ + Accessories
$____ = Total List Price.
U. S. PRODUCT
www.danuser.com
Less dipperstick pin. For dipperstick widths up to 13”.
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
10296
49 lbs
$436.00
10231
49 lbs
436.00
10481
50 lbs
436.00
10232
50 lbs
436.00
10233
48 lbs
436.00
Weld Mtn
Welded mount w/ fixed width
50 lbs
550.00
SMALLER BACKHOE & MINI-EXCAVATOR MOUNT KITS
PART
NUMBER
10201
10201
10202
10203
10204
10204
10205
10206
10298
10207
10208
10209
10210
DESCRIPTION
WEIGHT
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
42 lbs
46 lbs
46 lbs
46 lbs
46 lbs
LIST PRICE
FRT EXTRA
$289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
289.00
QUICK ATTACH MOUNTING KITS
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
10172
Cat 420D & 420E (pin grabber)
75 lbs
$750.00
10173
JCB 208S, 803 & 8018
40 lbs
623.00
10174
JD 790ELC
172 lbs
1,163.00
10175
JD 135C RTS
82 lbs
717.00
20200
60 lbs
467.00
20201
60 lbs
467.00
20210
Yanmar Vio40/45/50/55 (quick coupler)
43 lbs
631.00
10176
Yanmar VIO27 & VIO35 (quick coupler)
45 lbs
620.00
10177
Yanmar VIO40, VIO45, VIO55 & VIO50 (quick coupler)
50 lbs
631.00
20007
Kubota KX161-3 & U45 - USA models only
60 lbs
467.00
20008
Kubota KX121 - USA models only
60 lbs
467.00
20026
Kubota KX057 & U55 - USA models only
60 lbs
467.00
20202
Bobcat X-Change
55 lbs
522.00
CUSTOM MOUNTS - CALL FOR PRICING
JANUARY 2014
GST # R101743045
Sheet 203
TLB (BACKHOE & EXCAVATOR MOUNTING KIT)
U. S. PRODUCT
www.danuser.com
PART
NUMBER
DESCRIPTION
WEIGHT
10489
Mounting Kit (includes knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware.
43 lbs
LIST PRICE
FRT EXTRA
$292.00
OFFSET FRONT-END LOADER QUICK ATTACH
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
20652
Quick attach plate offset w/ hardware
72 lbs
$388.00
20653
Euro/Global offset w/ hardware
86 lbs
416.00
JANUARY 2014
GST # R101743045
Sheet 203
BOLT-ON BUCKET MOUNT
U. S. PRODUCT
www.danuser.com
WOBBLE AUGERS
•
•
•
•
•
•
•
These augers pushes through dirt, sand, clay,
asphalt, compacted rock & embedded rock.
No loose dirt in the bottom of the hole
No excess dirt to fall back into the hole
No dirt to remove around the top of the hole
Compacted hole ready for concrete
Suggested mounting to skid-steers, front-end
loaders, backhoes, excavators, miniexcavators, telescopic handlers, articulated
loaders, and integrated tool carriers
Requires down force for correct operation
Not for 3-point hitch mounted diggers
Note: 9” Wobble auger should be used on a machine with an Operating Load or Rated Operating Capacity of 2250 lbs or greater, utilizing an
auger drive with 2000 ft.-lbs of torque or greater.
WOBBLE AUGERS
AUGER
SIZE
2” Hex
Part #
WGT
4"
6"
9"
20600
20603
20606
58 lbs
86 lbs
115 lbs
LIST PRICE
FRT EXTRA
2-9/16”
Part #
$320.00
404.00
618.00
20604
20607
20601
WGT
58 lbs
86 lbs
115 lbs
LIST PRICE
FRT EXTRA
$ 320.00
404.00
618.00
2” RD
PART #
20602
20605
20608
WGT
58 lbs
86 lbs
115 lbs
LIST PRICE
FRT EXTRA
$320.00
404.00
618.00
FISHTAIL POINTS
JANUARY 2014
Part #
Description
LIST PRICE
FRT EXTRA
10331
Dirt
$32.00
10332
10335
Hard-surface
Carbide
69.00
119.00
GST # R101743045
Sheet 203
•
U. S. PRODUCT
www.danuser.com
FAB AUGERS
•
•
•
•
4FT Length Fab Augers - Standard
2” Hex
Auger #
2-9/16” RD
Auger #
2” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
10600
10601
10602
4”
0
42 lbs
LIST PRICE
FRT EXTRA
$242.00
10603
10604
10605
6”
2
46 lbs
257.00
10606
10607
10608
8”
2
78 lbs
371.00
10609
10610
10611
9”
3
85 lbs
384.00
425.00
10612
10613
10614
10”
3
98 lbs
10615
10616
10617
12”
4
115 lbs
438.00
10618
10619
10620
15”
5
135 lbs
606.00
10621
10622
10623
16”
5
146 lbs
627.00
10624
10625
10626
18”
6
170 lbs
707.00
10627
10628
10629
20”
6
182 lbs
876.00
10630
10631
10632
24”
8
211 lbs
909.00
10633
10634
10635
30”
9
272 lbs
1,165.00
10636
10637
10638
36”
11
365 lbs
1,480.00
DIAMETER
NO. OF
TEETH
WEIGHT
2” Hex
Auger #
2-9/16” RD
Auger #
2” RD
Auger #
LIST PRICE
FRT EXTRA
10600-3
10601-3
10602-3
4”
0
42 lbs
$236.00
10603-3
10604-3
10605-3
6”
2
42 lbs
247.00
10606-3
10607-3
10608-3
8”
2
57 lbs
348.00
10609-3
10610-3
10611-3
9”
3
62 lbs
360.00
10612-3
10613-3
10614-3
10”
3
69 lbs
382.00
10615-3
10616-3
10617-3
12”
4
78 lbs
399.00
10618-3
10619-3
10620-3
15”
5
87 lbs
528.00
10621-3
10622-3
10623-3
16”
5
93 lbs
561.00
10624-3
10625-3
10626-3
18”
6
106 lbs
590.00
10627-3
10628-3
10629-3
20”
6
134 lbs
685.00
10630-3
10631-3
10632-3
24”
8
153 lbs
808.00
10633-3
10634-3
10635-3
30”
9
208 lbs
1,033.00
10636-3
10637-3
10638-3
36”
11
275 lbs
1,291.00
JANUARY 2014
GST # R101743045
Sheet 203
U. S. PRODUCT
www.danuser.com
FAB AUGERS
•
•
•
•
2” Hex
Auger #
2-9/16” RD
Auger #
2” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
LIST PRICE
FRT EXTRA
10600-5
10601-5
10602-5
4”
0
51 lbs
$292.00
10603-5
10604-5
10605-5
6”
2
51 lbs
348.00
10606-5
10607-5
10608-5
8”
2
101 lbs
466.00
10609-5
10610-5
10611-5
9”
3
111 lbs
472.00
10612-5
10613-5
10614-5
10”
3
126 lbs
539.00
10615-5
10616-5
10617-5
12”
4
145 lbs
545.00
10618-5
10619-5
10620-5
15”
5
164 lbs
741.00
10621-5
10622-5
10623-5
16”
5
177 lbs
848.00
10624-5
10625-5
10626-5
18”
6
207 lbs
926.00
10627-5
10628-5
10629-5
20”
6
254 lbs
1,022.00
10630-5
10631-5
10632-5
24”
8
268 lbs
1,094.00
10633-5
10634-5
10635-5
30”
9
445 lbs
1,655.00
10636-5
10637-5
10638-5
36”
11
501 lbs
1,813.00
DIAMETER
NO. OF
TEETH
WEIGHT
2” Hex
Auger #
2-9/16” RD
Auger #
2” RD
Auger #
LIST PRICE
FRT EXTRA
10600-6
10601-6
10602-6
4”
0
60 lbs
$326.00
10603-6
10604-6
10605-6
6”
2
60 lbs
449.00
10606-6
10607-6
10608-6
8”
2
128 lbs
545.00
10609-6
10610-6
10611-6
9”
3
141 lbs
561.00
10612-6
10613-6
10604-6
10”
3
160 lbs
629.00
685.00
10615-6
10616-6
10607-6
12”
4
186 lbs
10618-6
10619-6
10620-6
15”
5
193 lbs
904.00
10621-6
10622-6
10623-6
16”
5
208 lbs
1,027.00
10624-6
10625-6
10626-6
18”
6
244 lbs
1,111.00
10627-6
10628-6
10629-6
20”
6
296 lbs
1,274.00
10630-6
10631-6
10632-6
24”
8
325 lbs
1,476.00
10633-6
10634-6
10625-6
30”
9
527 lbs
2,082.00
10636-6
10637-6
10638-6
36”
11
615 lbs
2,351.00
JANUARY 2014
GST # R101743045
Sheet 203
U. S. PRODUCT
www.danuser.com
CAST AUGERS
•
•
•
•
4FT Length Cast Augers - Standard
2” Hex
Auger #
2-9/16” RD
Auger #
2” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
10657
10658
10659
6”
2
48 lbs
LIST PRICE
FRT EXTRA
$391.00
10660
10661
10662
8”
4
83 lbs
560.00
10663
10664
10665
9”
4
89 lbs
606.00
10666
10667
10668
10”
4
102 lbs
627.00
10669
10670
10671
12”
4
117 lbs
647.00
10672
10673
10674
15”
6
139 lbs
814.00
10675
10676
10677
16”
6
148 lbs
873.00
10678
10679
10680
18”
6
168 lbs
959.00
10681
10682
10683
20”
6
231 lbs
1,336.00
10684
10685
10686
24”
8
210 lbs
1,376.00
10687
10688
10689
30”
10
280 lbs
1,759.00
10690
10691
10692
36”
12
376 lbs
2,056.00
10693
10694
10695
42”
16
460 lbs
2,949.00
10696
10697
10698
48”
18
550 lbs
3,437.00
2-9/16” RD
Auger #
2” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
2” Hex
Auger #
LIST PRICE
FRT EXTRA
10657-3
10658-3
10659-3
6”
2
40 lbs
$376.00
10660-3
10661-3
10662-3
8”
4
67 lbs
511.00
10663-3
10664-3
10665-3
9”
4
70 lbs
545.00
10666-3
10667-3
10668-3
10”
4
74 lbs
550.00
10669-3
10670-3
10671-3
12”
4
81 lbs
578.00
10672-3
10673-3
10674-3
15”
6
90 lbs
730.00
10675-3
10676-3
10677-3
16”
6
96 lbs
769.00
10678-3
10679-3
1080-3
18”
6
108 lbs
864.00
10681-3
10682-3
10683-3
20”
6
122 lbs
1,162.00
10684-3
10685-3
10686-3
24”
8
154 lbs
1,212.00
10687-3
10688-3
10689-3
30”
10
209 lbs
1,538.00
10690-3
10691-3
10692-3
36”
12
276 lbs
1,678.00
10693-3
10694-3
10695-3
42”
16
416 lbs
2,705.00
10696-3
10697-3
10698-3
48”
18
306 lbs
3,114.00
JANUARY 2014
GST # R101743045
Sheet 203
U. S. PRODUCT
www.danuser.com
CAST AUGERS
•
•
•
•
2” Hex
Auger #
2-9/16” RD
Auger #
2” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
LIST PRICE
FRT EXTRA
10657-5
10658-5
10659-5
6”
2
62 lbs
$489.00
10660-5
10661-5
10662-5
8”
4
121 lbs
629.00
10663-5
10664-5
10665-5
9”
4
125 lbs
662.00
10666-5
10667-5
10668-5
10”
4
143 lbs
752.00
769.00
10669-5
10670-5
10671-5
12”
4
158 lbs
10672-5
10673-5
10674-5
15”
6
167 lbs
887.00
10675-5
10676-5
10677-5
16”
6
180 lbs
909.00
10678-5
10679-5
10680-5
18”
6
209 lbs
1,010.00
10681-5
10682-5
10683-5
20”
6
241 lbs
1,386.00
10684-5
10685-5
10686-5
24”
8
269 lbs
1,532.00
10687-5
10688-5
10689-5
30”
10
374 lbs
1,930.00
10690-5
10691-5
10692-5
36”
12
502 lbs
2,149.00
10693-5
10694-5
10695-5
42”
16
611 lbs
3,574.00
10696-5
10697-5
10698-5
48”
18
765 lbs
4,388.00
DIAMETER
NO. OF
TEETH
WEIGHT
2” Hex
Auger #
2-9/16” RD
Auger #
2” RD
Auger #
LIST PRICE
FRT EXTRA
10657-6
10658-6
10659-6
6”
2
70 lbs
$533.00
10660-6
10661-6
10662-6
8”
4
138 lbs
702.00
10663-6
10664-6
10665-6
9”
4
140 lbs
735.00
10666-6
10667-6
10668-6
10”
4
146 lbs
786.00
10669-6
10670-6
10671-6
12”
4
189 lbs
803.00
10672-6
10673-6
10674-6
15”
6
196 lbs
977.00
10675-6
10676-6
10677-6
16”
6
212 lbs
1,151.00
10678-6
10679-6
10680-6
18”
6
246 lbs
1,167.00
10681-6
10682-6
10683-6
20”
6
284 lbs
1,543.00
10684-6
10685-6
10686-6
24”
8
327 lbs
1,717.00
10687-6
10688-6
10689-6
30”
10
529 lbs
2,267.00
10690-6
10691-6
10692-6
36”
12
616 lbs
2,508.00
10693-6
10694-6
10695-6
42”
16
791 lbs
4,522.00
10696-6
10697-6
10698-6
48”
18
994 lbs
6,042.00
JANUARY 2014
GST # R101743045
Sheet 203
U. S. PRODUCT
www.danuser.com
2” Hex
Auger #
2-9/16” RD
Auger #
2” RD
Auger #
DIAMETER
10700
10701
10702
4.5”
4
73 lbs
$882.00
10703
10704
10705
6”
6
66 lbs
1,321.00
10706
10707
10708
7”
8
80 lbs
1,361.00
10709
10710
10711
8”
8
94 lbs
1,495.00
10712
10713
10714
9”
8
103 lbs
1,516.00
10715
10716
10717
10”
10
113 lbs
1,557.00
10718
10719
10720
12”
12
135 lbs
1,706.00
10721
10722
10723
14”
14
160 lbs
1,928.00
10724
10725
10726
16”
16
183 lbs
1,995.00
10727
10728
10729
18”
18
208 lbs
2,150.00
10730
10731
10732
24”
22
291 lbs
2,562.00
10733
10734
10735
30”
24
340 lbs
2,831.00
10736
10737
10738
36”
30
395 lbs
3,208.00
10758
Bullet Rock Pilot
10759
Bullet Rock Tooth
NO. OF
TEETH
WEIGHT
LIST PRICE
FRT EXTRA
416.00
12.00
TREE AUGERS– TREE AND SHRUB PLANTING
2” Hex
Auger #
2-9/16’ RD
Auger #
2” RD
Auger #
DIAMETER
NO. OF
TEETH
WEIGHT
10639
10640
10641
18”-9”
7
130 lbs
$661.00
10642
10643
10644
24”-12”
10
186 lbs
877.00
10645
10646
10647
30”-15”
11
228 lbs
1,091.00
10648
10649
10650
36”-18”
13
304 lbs
1,311.00
•
•
•
•
•
•
JANUARY 2014
LIST PRICE
FRT EXTRA
TREE AUGERS
Hardened Bolt-on Teeth– Std. Incl. Gage Teeth in
Outside Positions & Wisdom Teeth in Inside Positions
Heavy-Duty Double Flighting
2” Hex, 2 9/16” Rd. and 2” Rd. collars available
4’ Standard Length
GST # R101743045
Sheet 203
BULLET ROCK AUGERS - ROCK, ASPHALT, & FROZEN GROUND - 4FT Length
U. S. PRODUCT
www.danuser.com
PART
NUMBER
DESCRIPTION
10331
Fishtail Point– Dirt
10332
Fishtail Point– Hard-faced
WEIGHT
LIST PRICE
FRT EXTRA
$32.00
69.00
10335
Fishtail Point– Carbide
119.00
10333
Point for 4” Auger– Dirt
59.00
10334
Point for 4” Auger– Hard-faced
101.00
10336
Point for 4” Auger– Carbide
134.00
10340
Gage Tooth– Dirt
4.00
10341
Gage Tooth-Hard-faced
9.00
10337
Wisdom Tooth-Dirt
4.00
10338
Wisdom Tooth-Hard-faced
9.00
10339
Wisdom Tooth-Carbide
10342
10343
Chisel Tooth– Dirt
Chisel Tooth-Hard-faced
10344
Chisel Tooth– Carbide
22.00
4.00
9.00
16.00
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
VARIABLE LENGTH EXTENSIONS:
10900
32 lbs
231.00
10901
56 lbs
317.00
10902
84 lbs
412.00
10903
22 lbs
169.00
10904
38 lbs
236.00
10905
73 lbs
326.00
10906
84 lbs
432.00
10907
2” - 24” long variable length extension
24”
169.00
10908
46”
236.00
10909
66”
325.00
JANUARY 2014
GST # R101743045
Sheet 203
POINTS AND TEETH FOR AUGER
U. S. PRODUCT
www.danuser.com
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
FIXED LENGTH EXTENSIONS
10910
21 lbs
167.00
10911
32 lbs
202.00
10912
56 lbs
283.00
10913
84 lbs
372.00
10914
38 lbs
167.00
10915
40 lbs
202.00
10916
76 lbs
283.00
10917
110 lbs
392.00
10918
2” - 24” long fixed length extension
25 lbs
156.00
10919
2” - 48” long fixed length extension
47 lbs
217.00
10920
2’ - 72” long fixed length extension
68 lbs
298.00
2” Hex drive unit - 2-9/16” round auger collar
18 lbs
$236.00
ADAPTERS
10921
10922
2” Hex drive unit - 2’ round auger collar
18 lbs
217.00
10923
2-9/16” round drive unit - 2” Hex auger collar
14 lbs
143.00
10924
2-9/16” round drive unit - 2” round auger collar
12 lbs
151.00
10925
2” ” round drive unit - 2” Hex auger collar
12 lbs
130.00
10926
2” ” round drive unit - 2-9/16” round auger collar
11 lbs
143.00
JANUARY 2014
GST # R101743045
Sheet 203
U. S. PRODUCT
POSTMASTER/SLAB BLASTER
www.danuser.com
•
•
•
•
•
•
•
•
•
•
Free fall weight design
Full stroke achieved with every cycle for maximum impact
energy
Hammer weight does not strike the top of the post
Grapple options allows one-person operation by picking up the
post from the ground without additional hydraulic or controls
Tilt option allows up to 20° to the left or right
Smooth operation with no shock back to the vehicle
Top of the post is contained in the machine, preventing the
post from kicking out
1 year warranty
Easily drives - T-post, Tent Stakes, Pipe Fence, Sign Post,
Fence Post, Guard Rails, Median Dividers, Railroad Ties
Mounts to Skid-Steers and Front-End Loaders (Skid-Steer and
Euro/Global Quick Attach)
PART
NUMBER
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
Skid-Steer Mount-Hammer Series
21000
Hammer SM40 - hydraulic continuous chain drive, 300 lb hammer weight (500 lbs max), 40”
stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be
used with log chain. Includes hoses with flat face couplers.
915 lbs
$5,829.00
21001
Hammer SM40 with Grapple - grapple for one-man operation
955 lbs
6,390.00
21002
Hammer SM40 with Tilt - tilt left or right up to 20°. Includes hydraulic tilt, diverter valve, and universal wiring harness that connects to battery.
1005 lbs
7,849.00
21003
Hammer SM40 with Grapple and Tilt
1045 lbs
8,410.00
Optional Wiring Harness
21220
21221
152.00
Wiring harness 8-pin (allows tilt function operation from joy stick controls) used on ASV,
Caterpiller, Komatsu, Terex 8 pin
Wiring harness 14-pin (allows tilt function operation from joy stick controls) used on Case,
New Holland, Bobcat, Volvo 14 pin
21222
Wiring harness 14-pin (allows tilt function operation from joy stick controls) used on John Deere
14 pin
21223
Cigarette lighter adapter (used with a diverter valve, instead of batter connections) connect
universal wiring harness supplied with Hammer to cigarette lighter
152.00
152.00
27.00
Front-End Loader Mount - Skid-Steer Quick Attach - recommended 75 hp & above tractors. Do Not exceed loader Rated Operating
Capacity. Use sufficient counterweights.
21006
Hammer LM40 - Hydraulic continuous chain drive, 300 lb hammer weight (500 lbs max). 40”
used with log chain. Includes 96” length hoses with flat face couplers. Se Front-End Loader Hose
Kit below for connection to rear tractor remotes.
Hammer EM40 with Grapple - grapple for one-man operation
946 lbs
5,941.00
920 lbs
6,502.00
21008
Hammer LM40 with Tilt - tilt left or right up to 20°. Includes hydraulic tilt and universal wiring that
connects to battery.
1076 lbs
7,961.00
21009
Hammer LM40 with Grapple & Tilt
1116 lbs
8,522.00
21007
JANUARY 2014
GST # R101743045
Sheet 203
Drive Posts Sitting Down with the Danuser Hammer
No Springs No Cylinders No Return Lines
U. S. PRODUCT
POSTMASTER/SLAB BLASTER
www.danuser.com
DESCRIPTION
WEIGHT
LIST PRICE
FRT EXTRA
Front-End Loader Mount - EURO/Global Quick Attach - recommended 75 hp & above tractors. Do Not exceed loader Rated Operating
Capacity. Use sufficient counterweights.
21010
Hammer EM40 - hydraulic continuous chain drive, 300 lb hammer weight (500 lbs max), 40”
used with log chain. Includes 96” length hoses with flat face couplers. See Front-End Loader
Hose Kit below for connection to rear tractor remotes.
Hammer EM40 with Grapple - grapple for one-man operation
880 lbs
$6,026.00
920 lbs
6,587.00
21012
Hammer EM40 with Tilt - tilt left or right up to 20°. Includes hydraulic tilt and universal wiring
harness that connects to battery.
970 lbs
8,045.00
21013
Hammer EM40 with Grapple and Tilt
1010 lbs
8,606.00
21011
Front-End Loader Hose Kit
21231
1/2” hose kit, 25’ long, with flat face ISO couplers and pioneer couplers. Mounting bracket included for welding or attaching with “bolts & nuts”. Hardware not included.
Accessories
18 lbs
388.00
21004
SM40 Grapple - may be added to SM40 Hammers only. Grapple for one–man operation
65 lbs
674.00
21014
EM40 / LM40 Grapple - may be added to the EM40 and LM40 Hammers. Grapple for one-man
operation
65 lbs
674.00
21005
SM40 Tilt - may be added to SM40 Hammers only. Tilt left or right up to 20°. Includes hydraulic
tilt and universal wiring harness that connects to battery.
200 lbs
2,239.00
21015
LM40 Tilt - may be added to LM40 Hammers only. Tilt left or right up to 20°. Includes hydraulic
200 lbs
2,239.00
21016
EM40 Tilt - may be added to EM40 Hammers only. Tilt left or right up to 20°. Includes hydraulic
195 lbs
2,435.00
21149
T-Post Adapter - must be added for driving t-post
22 lbs
135.00
21212
Plate - Floating Horseshoe - recommended when driving smaller diameter pipe (less than 4”) in
difficult conditions. Aids in keeping the post centered in the driver and reduces wear and tear on
machine. Does not interfere with operation of the grapple. Works with posts 5” diameter and
smaller including “T” post adapter
20 lbs
68.00
21163
Additional Weight Kit - steel shot may be added for additional weight and driving force
220 lbs
331.00
21278
Concrete Breaker kit - may be added to all Hammer models to convert to a concrete breaker.
Breaks up to 9” thick reinforced concrete. Includes 500 lb breaker attachment, foot and additional
hardware for assembling.
534 lbs
2,076.00
21280
Plate - Guard Rail - recommended when driving 6” or 8” I beams. Aids in keeping the guard rail
from twisting and shifting. Does not work with grapple.
20 lbs
68.00
JANUARY 2014
GST # R101743045
Sheet 203
PART
NUMBER
“All Applicable Taxes Extra”
BE Braber
Equipment
www.brabereq.com
TAB: # 9 POST HOLE DIGGERS
U.S. PRODUCTS
POST HOLE DIGGERS
Model
Number
Description
Approx.
Weight
LIST PRICE
FRT EXTRA
Net Set Up
Fee
BE-PHDG
Post Hole digger head
155 lbs
$679.00
$35.00
BE-PHA6G
6” Post Hole auger
32 lbs
196.00
BE-PHA9G
40 lbs
203.00
BE-PHA12G
52 lbs
247.00
JANUARY 2014
PRICES ON MANUFACTURED GOODS SUBJECT TO CHANGE
GST # R101743045
Sheet 203

sec 9 post hole diggers - Maritime Farm Supply ltd.

Transcription

Similar documents

classic service van for ford transit

cold planer series ii

creeping bentgrass creeping bentgrass - Tee-2

Spec Sheet

ryan lawnaire iv plus aerator

Defining Waterbodies: Davidsonville Wildlife Sanctuary

Soothe-A

Outdoor Essentials Product Catalog

GRUE TOUT-TERRAIN DE 1500 TONNES PRÈS DE LA CHUTE

Industrial Grade Electric Scissor Lifts