October Issue 2012 - PDF - Used Cnc Machines Canada | Cnc

Transcription

October Issue 2012 - PDF - Used Cnc Machines Canada | Cnc
OCTOBER 2012
Volume 27 Number 10
Phone: 905-528-7765
Fax: 905-917-0222
www.cluemachines.com
email: [email protected]
M A C H I N E R Y
IMAGINE
A solution that answers your vision
and fits your budget!
FERRIC-AKBEND PLATE ROLLS
FERRIC-AKBEND PROFILE ROLLS
- Up to 16” angle.
- Manual or NC.
- Modular Dies.
- Hyd. Side Guides.
- 3 or 4 Roll type.
- Hardened Rolls.
- Manual or CNC.
- Hyd. Drop end.
- Hyd. Driven Rolls.
FERRIC-FIBERMAK LASER
FERRIC-ERMAK PRESS BRAKES
PLASMA CUTTING
SHEARS
Quality is No Coincidence
ONTARIO – Eastern Canada
Western Canada
3980 Chadburn Crescent, Mississauga, ON L5L 3X4
P: 905.820.3232 • F: 905.820.3234
4406-58 St. S., Lethbridge, AB T1K 7E2
P: 403.380.5047 • F: 403.380.5048
www.ferricmachinery.com
MACHINERY INVENTORY
THE MACHINE TOOL SPECIALISTS
Full range of new and used machinery
VISIT OUR WEBSITE TO VIEW OUR EXTENSIVE INVENTORY
Masteel 500 Ton Pressbrake
Page 2
Gasparini Shear 3704
Kuneung Mill
Microcut CNC Lathe
Amada Vipros 255
Allsteel Shear
Fintek Power Leaf Brake
Maximart VMC
Amada Pressbrake
Seny Thread Roller, Tooling
Vulcan VTL
Clue October, 2012
Page 8 / Steel Marketplace / JULY 2007
• APPRAISALS • FINANCING •
• TRADE-INS • TOOLING •
• SHIPPING • INSTALLATIONS •
• TRAINING • SOFTWARE •
VISIT US AT:
www.jordancraigmachinery.com
TO VIEW A COMPLETE LIST
33 TON, AMADA, VIPROS 367 QUEEN,
FANUC 18P, 45 STA.,4 A/I, MFG:1999
Our stock number: 9550
22 Ton, AMADA, PEGA 255 FANUC 18P,
31 STATION, 3 A/I, MFG:2003
Our stock number: 9525
33 TON, AMADA,VIPROS 368 KING II,
FANUC 18P CNC CONTROL, MFG::2001
INSTALLED:2002 Our stock number: 9305
135 Ton, CINCINNATI 135CBII8,
CINCINNATI CBII CNC, MFG:1995
Our stock number: 9542
38.5 Ton, AMADA RG3512M2,
AMNC-IS CNC BG,MFG:2009
Our stock number: 9566
TRUMPF,TCL3030,4000 WATT, SIEMANS
5’ X 10’ DUAL PALLET, ROTARY AXIS,MFG: 2002
Our stock number: 9562
Amada,Gemini FO-3015NT,4,000 Watt,
5’x10’,Mfg:2006 Approx.25,000 Hrs [email protected]
Our stock number: 9547
33 Ton,AMADA,VIPROS 358 KING,
FANUC O4PC,4 A/I, MFG:1996
Our stock number: 9554
AMADA, MP1225NJ AUTOMATIC
LOAD/UNLOADER, MFG: 1999
Our stock number: 9243
33 Ton, WIEDEMANN,VECTRUM 3000,F1-1250
LOADER FANUC 16P, 52 STA., 2 A/I,MFG:1995
Our stock number: 9434
AMADA GEMINI FO4020NT, 4000 WATT,
6’ X 12’,APPROX. 25,000 HOURS, MFG:2005
Our stock number: 9474
135 Ton, TRUMPF C120, 122” O.A.,
CNC BACK GAUGE, MFG:2006
Our stock number: 9490
Check out our website for Photos, Specifications and a more complete inventory at
www. jordancraigmachinery.com
JORDAN CRAIG MACHINERY INT’L LLC, P.O Box 737, New City, NY 10956
Tel: 845-398-0073 [email protected]
Fax: 845-398-0074 www.jordancraigmachinery.com
Clue October, 2012
Page 3
63 Maplecrete Road, Concord, Ontario, L4K 1A5 Canada
Tel: (905) 669-7507 Fax: (905) 669-7512
e-mail: [email protected] web: www.tradermachinery.com
BENDERS
33 Ton
STIERLI-BIEGER, 300HE/CEB9, 2", Hyd, Pipe/Tube bender
BORING MILLS, HORZ
4.33"
TOSHIBA, BTD11-ER16, X-78.74" Y-59" W (Saddle)-78.74", Tosnuc 777, 4-Axis,
40 ATC, B-axis Rotary tbl
5.12"
TOSHIBA-SHIBAURA, BF-130A, Fanuc 15M, X column trvl 275.59", Y-188"
5"
UNION, BFT-130, Heidenhain TNC 155
5"
TITAN, CPAF 132, Seimans 840 CNC, Retrofit 1997
MILLS, CNC
TOSHIBA, TMC-13(3), CNC, C-axis w/ Fanuc 32i
BRAKES, PRESS
NEW
75, 130, 200, 250 Ton
“NEW” ACCURPRESSES, Absolute Models, CNC
15 Ton x 4’
WYSONG, Mech, CNC, Single Axis
20 Ton x 4’
ALLSTEEL, Light curtain
75 Ton x 10’
“NEW” ACCURPRESS, CNC
88 Ton x 82"
AMADA, RG-80S, CNC, w/NC9-EXII 3-Axis Control
90 Ton x 12’
CHICAGO, 1012-L, Mech, Rear Oper. Manual BG
120 Ton x 12’
ALLSTEEL, 120-12, Hyd
120 Ton x 12’
ALLSTEEL, 2-axis Automec CNC Gauge
130 Ton x 10’
“NEW” ACCURPRESS, CNC
135 Ton x 122"
TRUMPF, C120 (2006), 4-axis CNC Gauge
150 Ton x 10’
HACO, ERM 30135 (2001), CNC 3-axis, Safety lights, Manual crowning, Guarding
160 Ton x 12’
ALLSTEEL, CNC Hyd, Compubend
175 Ton x 12’
ALLSTEEL, Automec CNC150 (2002), 2-Axis ctrl, Light curtains, Guarding
200 Ton x 12’
“NEW” ACCURPRESS, CNC
250 Ton x 12’
“NEW” ACCURPRESS, CNC
300 Ton x 12’
PRIMELINE(BAYKAL) (2006), CNC 2-Axis, Hyd.
DRILLS, COLUMN & BENCH
1-3/8"cap
17"
“New” DRILLMASTER, Z5035, Geared Head
CRAFTSMEN, 5/8" chk, Floor standing
DRILLS, RADIAL
2-1/2’ Arm
3’ arm
KAO MING, KMR700DS
“New” TONE FAN, RD-900
ELECTRIC DISCHARGE MACHINES
CHARMILLES, Form 20ZNC, CNC Sinker, X-11.8" Y-7.87" Z-11.8"
GRINDERS, SURFACE, RECIPROC
Centerless
5"x 10"
6"x 12"
6"x 12"
6" x 18"
10"x 24"
12"x 24"
20"x 13’
ROYAL MASTER, CG-12X4, CNC, .004" - 1.5" Cap
ROCKWELL, Manual
HARIG, Manual
BOYAR-SCHULTZ, manual
“New” KENT, KGS-200
BROWNE & SHARPE, No 1024 Micromaster
PROTH, Hyd, Electro-Mag chk
SNOW, Hydraulic
LASERS
100 Watt
1500 Watt
2000 Watt
3000 Watt
3000 Watt
3500 Watt
5000 Watt
DECKEL, DML40si (2003), 5 Axis, Class 4, Lasersoft 3D ctrl, X-15.7" Y-11.8" Z-19.7"
MAZAK (1999), New Turbo X-510
MITSUBISHI (2001), 5’x 10’, Mitsubishi LC20BP Control
TRUMPF, L3030 (1998), 5’x 10’
TRUMPF, L2530 (1998), 4’x 8’
PRIMA (2004), 5’x 10’
TRUMPF, L3050 (2003), Linear laser, 5’x 10’
“New” MORTON, F1900-AEG (2001), Single Phase
COLCHESTER, Triumph 2500, 2001 & 1990, Vari speed control, 6-jax chk
“New” POWERTURN, 460
BOKO, D82H, Semi-Automatic Spinning lathe
LATHES, N/C & CNC
MAZAK, Integrex 200Y (1998), 40 ATC, 40"cc, Fusion 640, B-axis
20.87"Sw, 23.62" Turn length OKUMA, LU15-MW (1997), Live tool, Twin turret, sub spdl.
MACHINING CTRS, HORZ
TOYODA, FH100 (1989), Twin Pallet
SAEILO (1996), X-15.74" Y-13.78" Z-15.74", CNC, Fanuc OM
OKK, MCH800 (1985), X-79" Y-40" Z-32", 3000rpm, 50 ATC
MACHINING CTRS, VERT
HYUNDAI, SPT-V30TD (1999), Drill & Tapping, Dual Pallet
DECKEL, FP2NC, X-12" Y-12" Z-16", Dialog 4 CNC Control, Rotary Table
BOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,000rpm, ATC 18, CAT 20
MATSUURA, RA-1G (1999), X-20" Y-15.75" Z-18", Dual Pallet
MIKRON, UCP600 Vario (2006), X-23.6" Y-17.7" Z-17.7", 5-Axis, 20,000rpm, Heidenhain iTNC530
Page 44
PAGE
10"x 50"
16" x 35"
16"x 68"
TOPWELL, 5VK (1996), Anilam 1100 CNC control
FIRST, CV-410 (1999), BT40, Fanuc OM
PHOENIX, FM-250AC, Bed Type CNC, X-50" Y-20" Z-19"
MILLS, VERTICAL
9" x 49"
10"x 45"
10"x 50"
10" x 54"
11"x 49"
12"x 53"
16"x 56"
New MAGNUM-CUT, VM-2V, 3hp
FORWARD, Step pulley type
FIRST, LC-185VS, DRO
New MAGNUM-CUT, VM-4V, 40 Taper, 5hp
TOS, FNK25
DAH-LIH, DL-GH950, Universal, 40 taper
HURON, Ram Type, Universal
NOTCHING MACHINES
1/4"x 10"x 10"
APOLLO, Hyd., Variable
PRESSES, OBI
40 Ton
80 Ton
ROUSSELLE, #4, Air Clutch
BROWN BOGGS, 18LGA, 6" Stk, A/C
PRESSES, STRAIGHT SIDE
150 Ton
250 Ton
MINSTER, Piecemaker, 40"x 54" bed, 6"stk
BROWN BOGGS, SS2-250-72-39 (2000), 39"x 72" bed, 6"stk
PUNCHES, TURRET
STRIPPIT, FC1000R (1994), Fanuc Control
AMADA, Pega 357 (1992), Excellent Condition
22 Ton
WIEDEMANN, Centrum 2000 (1996), 2a/i, Fanuc OP, Assorted Tooling
22 Ton
WIEDEMANN, Motorum 2044 (1998), 30 Stn, 2 A/I
22 Ton
AMADA, Vipros 255 (2002), Fanuc 18P, 3 A/I, Large Assrt. of tooling
33 Ton
WIEDEMANN, C-3000 (1992), Fanuc OP, large asst of tooling, Very
good condition
33 Ton
AMADA, Pega 357 (1989), some tooling, good shape
33 Ton
AMADA, Vipros III 3510NT (2003), w/Amada Loader
60" Throat
STRIPPIT, 1500H/30 (2000), Fanuc 180iP
ROLLS, INITIAL PINCH
12ga x 4’
1/4"x 13’
KEETONA
PULLMAX
SAWS, BAND, HORIZONTAL
10"x 15"
LATHES, ENGINE
12" x 40"
16"x 50"
18" x 60"
63"X 106"
MEASURING MACHINES
MITUTOYO, MACH-V565 (2006), Like new
BORING MILLS, VERT
63"sw
MAKINO, S33 (2005), X-25.6" Y-19.7" Z-17.7", Pallet changer, Professional 3 CNC control,
CTS, 8980 Spdl hrs
MAKINO, SNC 106-A30 (1998), X-39.37" Y-23.62" Z-15.75", PRO3(Fanuc)
RACER, RMC4000 (2001), X-40" Y-24" Z-24", Fanuc O-MD
FADAL, 4020 (1988), X-40" Y-20" Z-20", CAT40, 21ATC, Fadal CNC88 Control
CHIRON (2005), X-78.8" Y-16" Z-16", Fanuc 18I, 12" Tsudakoma
OKK, MCV-860 (1998), X-80.31" Y-33.86" Z-28.35", 20" 4th-Axis rotary, CTS
“NEW” ACRA, Speeder FHBS-250V
SAWS, BAND, VERTICAL
ER MAIER, KM1012, Roll-in-Saw
18"x 20"
MARVEL, 81A, Tilt frame, Automatic, 1997/2001/2002
19"x 24"
DoALL, TF-2025NC (2007), Tilt frame, Automatic
SHEARS, POWER SQUARING
16ga x 24"
DIACRO
10ga x 4’
SAMPSON, Hyd.
10ga x 10’
CINCINNATI, 1010, Mechanical
3/16"x 8’
CINCINNATI (1998), Mech. Cut-To-Length line shear, 50-1/2" table
height from floor
3/8"x 12’
NIAGARA, Hydraulic
TABLES, ROTARY
12-1/4"
KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore
MISCELLANEOUS
16"
Air Dryer
Barfeeder
Electric Cable Reel
Hopper, conveyor
Keyseater
Rollformer
Spot Welder
Spot Welder
Uncoiler, Motorized
Wire Machinery
STARRETT, HB400, Quadra-Chek 2000 control, w/Workbench
PNEUMATIC, 115V/1/60
SPACESAVER, 4’ SMW, Autoload 12.65
AERO-MOTIVE, Weatherproof
NEGRI BOSSI, V160-610 (2006), 15oz, very low hrs,
DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2"
YODER, 14 station, 3"dia Shafts, 50hp, w/cut-off press, uncoiler
WELDOMATIC, 50 KVA
RAINBOW ELECTRONICS, 25 KVA
LITTELL, 4000Lbs, Max OD 58"
“NEW” METALEX, WT250, Wire Nibbler
Clue October
October,2012
2012
CLUE,
63 Maplecrete Rd.
Concord, Ontario L4K 1A5
Tel: (905) 669-7507
Fax: (905) 669-7512
www.tradermachinery.com
NEW CNC ACCURPRESSES
ABSOLUTE MODELS IN STOCK
75, 130, 200, 250 Ton
Fe a t u r e s :
•
•
•
•
•
•
•
•
H I G H A C C U R A C Y 0 . 0 0 0 4 R E P E ATA BI L I T Y
X & R P R E M I U M G AU G E S
M U LT I-A X I S C N C G AU G I N G O P T I O N S
CNC CROWNING
L ASE R SAF E T Y
C O M P L E T E G UA R DI N G
Q U I C K R E L E AS E C L A M P I N G
G E N E R O U S O P E N H E I G H TS & T H R O AT
DE P T H S
• T H E H Y DR AU L I C S Y S T E M I S SP E C I F I C AL LY
DE S I G N E D F O R H I G H S P E E D, S Y N C H R O N I Z E D Y 1 / Y 2 P R E SS B R A K E S
• LO W- N O I S E H Y DR AU L I C S Y S T E M
• C SA C O M P L I A N T
T H E C N C DE L E M C O N T R O L P R O V I D E S A
C O M PAC T AN D V E R SAT I L E S O L U T I O N F O R
P O W E R F U L E C O N O M I C P R E SS BR A K E
A P P L I C AT I O N S
I T I S BAS E D O N T H E L AT E S T T E C H N O LO G Y
G I V I N G F L E X I B I L I T Y TO U S E . O N BO A R D
U S B I N T E R FA C I N G G I V E S A FAS T P R O D U C T
A N D TO O L B A C K U P M E DI U M .
IN CONJUNCTION WITH:
4 Littleleaf Crescent, Markham, ON L3S 4E9
Phone: 905-201-7841
Fax: 905-201-7842
[email protected]
www.haydenleemachinery.ca
WE BUY SINGLE MACHINES OR COMPLETE PLANTS
Clue October, 2012
Page 5
From Stock
NEW MACHINES
Special Pricing
HEAVY DUTY LATHES
26" x 120" x4" Bore - 16" Wide Bed
20" x 80" x 4" Bore
Also in Stock: 16", 18" & 20" Swing
All New Milling Machines
Special Package Includes
• Fagor 2-Axis DRO
• Machine Vise
• Clamping Kit
• R-8 Collet Set
MAXIMART BEDMILL
DRILLMASTER RADIAL DRILL
MXB5 - 47"x 23"x 24"
Travel
7-1/2HP Inverter Head
Manual or with Fagor
3-Axis CNC
S1600 - 5'3" Arm
TF1100 - 44" Arm
TF900 - 36" Arm
TF750 - 30" Arm
BARON-MAX MACHINING CENTRE
CNC TEACH-IN LATHE WITH
FAGOR CNC CONTROL
POWERMASTER MACHINERY LTD.
1048 Matheson Blvd. E.. Mississauga, ON L4W 2V2
Tel: 905-624-9327
e-mail: [email protected]
PAGE 6
Fax: 905-624-8591
website: www.powermaster.ca
CLUE, October 2012
HACO
OMATIC
212
R
TURRET
With Robosoft TPC 25 Graphic Control
and USB Drive
OFFERED FOR SALE - REFURBISHED - 1999 HACO TURRET PUNCH PRESS
• 24 Tons, 80” X 50” Sheet Size, 12 Station (thick) turret, Robosoft TPC -25 CNC
TPC 25 Graphics
User-friendly graphic programming
with the Robosoft TPC25 Graphics
Omatic 212R Turret with 12 Stations
2550 Dunwin Drive,
Mississauga, ON L5L 1J5
Clue October, 2012
Page 7
STEVENS MACHINERYSALES (2005) INC.
2 Royalcrest Road, Etobicoke (Toronto) ON, M9V 2L5
Phone: (416) 798-3611 Toll Free: 1-866-798-3611 Email: [email protected]
www.stevensmachines.com
GPS CNC HYDRAULIC PRESS BRAKES
MADE IN ITALY
•
•
•
•
4 Ft x 50 Ton to 20 Ft x 1,250 TON
Standard – Y1,Y2,X,R & CNC Bed Deflection
Optional – 8 Axes
Laser Gds, 575 Volt, Hydro, PSR Ready
GBS CNC HYDRAULIC PRESS BRAKES
•
•
•
•
Patented Pull-Down Ram
4 Ft x 50 Ton to 10 Ft x 130 Ton
4-Axes Standard, 6-Axes Optional
C/W: Laser Gds, 575 Volt, Hydro, PSR Ready
AIR COMPRESSORS, 30hp, JOY, Twistair, Rotary Screw, 120 Gallon Horiz. Tank, 4000hrs, 460V
$4,950.00
AIR COMPRESSORS, 5hp, DEVILBISS, Two Stage Hd, 80 Gallon Horizontal Tank, 575V
$1,150.00
AIR COMPRESSORS, 5hp, CAMPBELL HAUSFELD, 60 Gallon Vertical Tank, 230 Volt
$450.00
BRAKES, HAND, 18ga x 8’, BROWN BOGGS, Floor model
$3,950.00
BRAKES, PRESS, 360 Ton x 13’, LA-G (New), CNC, 4-6 axis, Laser, Hyd., 575V - Fast Dlvy
P.O.R
BRAKES, PRESS, 275 Ton x 13’, LA-G (New), CNC, 4-6 axis, Laser, Hyd., 575V - Fast Dlvy
P.O.R
BRAKES, PRESS, 198 Ton x 13’, LA-G (New), CNC, 4-6 axis, Laser, Hyd., 575V - Fast Dlvy
P.O.R
BRAKES, PRESS, 132 Ton x 13’, LA-G (New), CNC, 4-6 axis, Laser, Hyd., 575V - Fast Dlvy
P.O.R
BRAKES, PRESS, 120 Ton x 10’, ALLSTEEL, Hyd, Bolster, Foot Pedal, 20 HP, 575V
$25,000.00
BRAKES, PRESS, 110 Ton x 10’, LA-G (New), CNC, 4-6 axis, Laser, Hyd., 575V - Fast Dlvy
P.O.R
BRAKES, PRESS, 70 Ton x 10’, ALLSTEEL, Hyd, Bottom Die Holder, 20 Hp, 550 Volt
$15,000.00
BRAKES, PRESS, 50 Ton x 8’, BRONX, Hyd., 2 Axis CNC, Safety Lights, 550V
$15,000.00
BRAKES, PRESS, 48 Ton x 63", CONE (New), 5 Axis CNC, Laser, Electric Servo-Drive, In stock
P.O.R
BRAKES, PRESS, 25 Ton x 34", CONE (New), 3 Axis CNC, Laser, Electric Servo-Drive, In stock
P.O.R
DIES FOR PRESS BRAKES, Various sizes and lengths
P.O.R
BUFFERS & POLISHERS, 12" Throats, PROGRESS, P200, 2 HP, 575 Volt, On/Off Switch
$950.00
DEBURRING MACHINES, 52" Wide, RAND-BRIGHT, 1 Belt Hd, 30 Hp, 575 V - New: 2001
$25,750.00
DEBURRING MACHINES, 37" Wide, CEMCO, Dry,Scotchbrite Drum,Turns & Osc, 575 V, DEMO
$19,500.00
DEBURRING MACHINES, 37" Wide, MIDWEST SANDRIGHT (New), 1 Belt Head, 20Hp,575V-In Stock
P.O.R
DEBURRING MACHINES, 37" Wide, TIMESAVER, 1 HD, Wet, Abrasive Belt, Dryer
$15,000.00
DEBURRING MACHINES, FALLS, Sheet/Edge Deburrer, #99, 1 Head, Bench Model, 110V
$1,500.00
DEBURRING MACHINES, RSA, TUBE, Adj. From 4’-20’ Tubes, Double End, 2 Brushes
$34,500.00
DRILLS, RADIAL, STANDARD MODERN, 2 MT, 24" Arm, 1 Hp Motor, 17-1/2" Sq. Table
$3,950.00
DUST COLLECTORS, RAND-BRIGHT, Wet, 2800 CFM, Stainless Steel, 10 Hp, 575 Volt
$10,750.00
GRINDERS, SURFACE, RECIPROC, 8"x 24", JAKOBSEN, Hyd., Power Feed, 550 Volt
$4,950.00
GRINDERS, SURFACE, RECIPROC, 6"x 12", CHEVALIER, Manual Feeds, 1 Hp Motor, 575 Volt
$2,950.00
IRONWORKERS, 90 Ton, PIRANHA, P-4, Hyd, Elect. Foot Pedal, 2 Joy Sticks, 15 Hp, 575 V
$15,950.00
MILLS, UNIV, 17"x 39", DECKEL, FP 2LB, Angle Tbl, Vert Hd, Arbors, # 40, Pwr Fds, DRO, 3Hp, 550V $7,950.00
MILLS, TURRET, 11"x 58", BRIDGEPORT, #40 Sp., 3 Axis DRO, VS, Pwr Fds, 575 V
$4,950.00
MILLS, TURRET, 9"x 49", FIRST, #40, 2 Axis DRO, V.S, Pwr Drawbar, 3Hp, 575V
$3,950.00
MILLS, TURRET, 9"x 48", RYDER, R8, Power Long. Feed, V.S, 3 Hp, 575V
$2,750.00
MILLS, TURRET, 9"x 42", RMC, Turret, R8, 2 Axis DRO, V.S, 3 Hp, 575V, New: 2005
$3,950.00
NOTCHING MACHINES, 5" x 5" x 1/8", PIERCE-ALL, 90 Degree Notching Die
$850.00
NOTCHING MACHINES, 3" X 3", (2) PIERCE-ALL, Notching Dies in Multi-Cycle Air Press, Foot Pedal $3,500.00
PRESSES, HYDRAULIC & AIR, 1 Ton, DENISON, 3-1/8" Stroke, 600 IPM, Palm Buttons, 115V
$1,250.00
PRESSES, KICK, 5 Ton, ROPER WHITNEY, 18" Deep Throat, 36" x 24" Table, Floor Model
$1,350.00
PRESSES, KICK, 5 Ton, WHITNEY JENSEN, 24” Deep Throat, 42" x 20" Table, Floor Model
$1,500.00
PRESSES, OBI, 150 Ton, BLOW, 10" St, 18" Sh, 48" x 30" Bed, 40spm, A/C, Upgraded Controls
$39,500.00
PRESSES, OBI, 30 Ton, BROWN BOGGS, 2-1/2" St, 8-1/2" SH, Mech. Clutch
$3,750.00
PRESSES, OBI, 25 Ton, ROUSSELLE, 2" ST, 10-1/2" SH, 125 SPM, 2 Hp, 575 V, Mech. Clutch
$3,250.00
PRESSES, OBI, 22 Ton, ALCECO, 1" ST, 10-1/2" SH, 135 SPM, 575 V, Air Foot Pedal
$4,500.00
PRESSES, OBI, 15 Ton, ROUSSELLE, 18” Throat, 2" St, 6-3/4" SH, Mech. Clutch, 550V
$2,950.00
PRESSES, OBI, 10 Ton, BENCHMASTER, A/C, 1-1/2” ST, 10-1/4” SH, 550 Volt
$4,750.00
PRESSES, OBI, 5 Ton, ALVA ALLEN, 1-1/4" St., 7" SH, 1/2 HP, Bench, 110 Volt
$2,250.00
PRESSES, OBI, 5 Ton, BENCHMASTER, 1-1/4”St., 7-1/4”SH, 1/3 HP, Bench, 110 Volt
$2,250.00
PRESSES, OBI, 5 Ton, BLOW, 1” ST, 6-7/8” SH, 1/2 HP, 550 Volt
$1,850.00
PRESSES, OBI, 4 Ton, AZIMUTH, 1-1/4” St, 5-3/4” SH, 1/3 HP, Bench, 110 Volt
$2,250.00
PRESSES, OBI, 4 Ton, BENCHMASTER, 1" St, 6-1/2" SH, 1/3 HP, Bench, 110 Volt
$2,250.00
PRESSES, OBI, 2 Ton, AZIMUTH, 1/4” St, Mech. Clutch, On Bench, 110 Volt
$2,150.00
PRESSES, MISCELLANEOUS, 6 Ton, HAEGER, HP-6-B, Insert Press, 12" Th, 1-1/2 Hp, 230/460 Volt $4,500.00
PRESSES, MISCELLANEOUS, 3 Ton, GREENERD, Arbor Press, 6” Throat, Bench Model
$350.00
PUNCHES, SINGLE STATION, 30 Ton, STRIPPIT, Super AG, 2 Axis CNC, Holders & Tooling
$15,500.00
PUNCHES, TURRET, 30 Ton, STRIPPIT, FC 1000 XT, 24 Stations, 1 Auto-Index
$20,000.00
PUNCHES, TURRET, 20 Ton, STRIPPIT, FC 750, 20 Stations, CNC Control, 460 Volt
$5,500.00
PUNCHES, TURRET, 8 Ton, ROTEX, 15 BK, 9/16" - 1-7/8", 24" Throat
$5,950.00
ROLLS, PLATE BENDING, 22ga x 36", BUSY BEE, 2" OD, Wire Grooves, On Stand With Wheels
$695.00
SANDERS, 30" x 96" Table, PROGRESS, PMC-264-6, Stroke, 5 Hp, 550 Volt, 4,300 SFPM
$3,500.00
SANDERS, 11" x 33" Tilting Table, CRAFTEX, B2332, Belt/Edge, King 1 Hp Dust Unit
$650.00
SAWS, BAND, VERTICAL, 20" Throat, STARTRITE, Blade Welder, Variable Speeds
$3,950.00
SAWS, BAND, VERTICAL, 20" Throat, POWERMATIC, Blade Welder, Var. Speeds
$3,500.00
SAWS, BAND, VERTICAL, 20" Throat, T-JAW, Blade Welder, Var. Spds, Power Table
$3,950.00
SAWS, ALUMINUM, 14" Blade, BEWO, Fully Auto Saw With Length Stop & Supports
$14,500.00
SAWS, MISC, 12" Blade, PISTORIUS, Double Mitre, 2 x 1.5 Hp Motors, Pneu. Feed, Coolant
$2,750.00
SAWS, MISCELLANEOUS, SAFETY SPEED CUT, H4, Vertical Panel, 50" Crosscut, 120" Frame, 120V $1,450.00
SHEARS, HAND & FOOT, 16ga x 52”, PEXTO, Foot
$2,750.00
SHEARS, HAND & FOOT, 16ga x 52", NATIONAL (New), H.C.H.C. Blades, Man. Back Gauge
$3,950.00
SHEARS, HAND & FOOT, 16ga x 36", BROWN BOGGS, Foot
$1,750.00
SHEARS, POWER SQUARING, 1/4"x 72", NATIONAL (New), Hyd., 7-1/2hp, 575V, CSA - Fast Dlvy
P.O.R
SHEARS, POWER SQUARING, 1/4"x 48", NATIONAL (New), Hyd., 7-1/2hp, 575V, CSA - Fast Dlvy
P.O.R
SHEARS, POWER SQUARING, 10ga x 10’, KEETONA, A/C, 60 SPM, 36” P.B.G, Sq.Arm, 10Hp, 575V $8,500.00
SHEARS, POWER SQUARING, 12 ga x 52", NATIONAL (New), Hyd, 3hp, 575V, CSA - Fast Dlvy
P.O.R
SHEARS, POWER SQUARING, 10ga x 52", NATIONAL (New), Hyd, 5hp, 575V, CSA - Fast Dlvy
P.O.R
SHEARS, POWER SQUARING, 14 ga x 10’, NATIONAL (New), Mechanical, 5hp, 575V, CSA - Fast Dlvy
P.O.R
SHEARS, POWER SQUARING, 16ga x 52", NATIONAL (New), Hyd, 3hp, 575V, CSA - Fast Dlvy
P.O.R
SHEARS, POWER SQUARING, 14ga x 36", BROWN BOGGS, 60spm, 1.5hp, 110/220V, Man.BG
$3,250.00
SLITTING, 18" Wide, BROOKES, For Coils, 0.005” - .064” Thick, 550 V
$5,500.00
TABLES, ROTARY & INDEXING, Horiz/Vert, 6" Dia, 8" Dia, 14" Dia. - All Good
P.O.R.
UNCOILERS, 10" Wide x 600lb x 44"OD, EGAN, 110V
$1,650.00
UNCOILERS, 10” Wide x 1,000 lb x 50” OD, (2) DURANT, 110V
$1,250.00
UNCOILERS, 24” Wide x 5,000 lb x 60” OD, MANUAL
$1,000.00
WELDERS, SPOT, 100 KVA, PRECISION, 24” Throat,575/60/1 Volt,Water-Cooled Tip
$5,950.00
WELDERS, SPOT, 18 KVA, REX, 14” Throat, 550 V, Water-Cooled Tips
$1,500.00
WELDERS, SPOT, 10 KVA, WELDOMATIC, Rocker Arm, 12” TH, Water Cooledn Tips, 550 V
$2,950.00
ACCESSORIES, Chucks for Lathes, 3 & 4 Jaw, Used, Up to 16" Diameter
P.O.R
ACCESSORIES, C-Punches & Dies, For Presses or Press Brakes
P.O.R
ACCESSORIES, DIE SHOES, , Good Quantity of Various Sizes For Punch Presses or Press Brakes
P.O.R
MISCELLANEOUS, Beader, Trimmer & Flanger, JORG, 21 Gauge M.S., Floor Stand, 3/4 Hp, 575V
$1,950.00
MISCELLANEOUS, Hardness Tester, ALBERT GNEHM, Analogue, B-0 to B-100, 5-1/2 Throat Depth
$795.00
MISCELLANEOUS, Pantograph, DECKEL, G1L, 2-D Engraving Machine, 20" x 8" Table, 1/3 Hp, 110V $1,500.00
MISCELLANEOUS, Sand Blast Cabinet, EMPIRE, S-20, 110 Volt, 36” x 24” Inside, Gloves, Etc
$850.00
SEE MY WEBSITE FOR PICTURES & SPECS. ON ALL NEW & USED MACHINES!
Page
Page 88
Clue October, 2012
L. S. WALKER MACHINE TOOLS INC.
BORING MILLS, HORZ, FLOOR
TOSHIBA (BF 130 CNC) 5" spindle (1992) 118"x350" travels, floor plates, rotary table, Fanuc 15M
control
BORING MILLS, CNC, HORZ, FLOOR
UNION (BFP 130 CNC) 5.12" (1994) 120"x 275", ISO 16 rotary table, floor plates, Heidenhain ctrl
BORING MILLS, HORZ, TABLE
UNION (BFT 90/3) 4" (1988) 49"x 63" travels, 49"x 55" rotary table, 50 taper spindle, 3-axis DRO,
new paint
TIGERCUT (110 CNC) 4.3" 63”x86” travels, Fanuc 31i control, new 2012
UNION (BFT 110 CNC) 60"x 80" travels Heidenhain 155 control, built in rotary, new 1988
TOSHIBA (BTD 110 ER16) 78" cross travel (1992) ATC, Tosnuc CNC control
BORING MILLS, VERT
WEBSTER & BENNETT 72" 84" Swing, elevating Rail, tracer attachment
DRILLS, RADIAL
BERGONZI (TR-40) 2" cap 4’ drill, good
MAS (VO 75 x 2000) 2-1/2" cap
SOROLUCE (TR-1600) 2.5" cap 5’ drill, very nice runner
MAS (VR 8A x 2500) 3" cap
ERLO 18"x 30" table, 2" drilling capacity, new 1996
4” TOS W100A, 50 taper, 63”x44”x63”,
49”x49” rotary, 4-axis DRO, new 1989
HONES
SUNNEN PRECISION (MBB-1600)
SUNNEN (MBB 1660 K) Hydraulic with Tooling
LATHES, ENGINE
HARDINGE HC chucking lathe, 8 station turret
HARDINGE (HLV-H) toolroom lathe, collets, taper att, nice
RIVOL 14"x 40" chucks, steadies, 4-way tool post
MARTIN 20"x 120"
ENTERPRISE 20"x 120"
TOS (SN 63C) 25"x 60" new 2000
STANKO (K3TC) 84"x 393" (1977) 4-bed way design, 50 ton capacity, new electrics
LATHES, N/C & CNC
KITAKO 4 spindle vertical, new 2004, Fanuc control
MORI SEIKI (MT 253S/1000) Fanuc control, Milling & Y-axis w/sub spindle, New 2000
MACHINING CTRS, HORZ
NIIGATA (HN 80 FC) 32"x 32" pallets Fanuc 11m control, 6 pallet pool, built in facing head and
in/out spindle movement for boring mill applications, 120 ATC, new 1992
Poreba TCG 160 60”x393” Lathe,
as new – 1998
MACHINING CTRS, VERT
FADAL (2040) new 2000, 40 taper, 10,000rpm spindle
DMG (DMU 50T) New 2004, 3+2 axis, Heidenhain i530 control
HARTFORD (PRO 4150) 60"x 157" 50 taper, 10,000 DDS, Fanuc, new 2012
MEASURING MACHINES
ZIESS (ScanMax CMM) (1998)
MILLS, CNC
LILIAN 10"x 50" 7.5hp w/Mil-power CNC, 40 taper, New 2011
RACER 12"x 54" (1999) 40tpr, 6,000rpm, 5hp
MILLS, TURRET
KONDIA (FV-1) 10"x 50" 40 taper, power feed, riser block, 2-axis DRO, 3 available
SAWS, BAND, HORIZONTAL
MEP (350SA) 14" blades non-farrious saw, pendant control, new 1999
BAXTER 13"x 18" good shape
SAWS, BAND, VERTICAL
DOALL (2613) 26" throat, blade welder
MISCELLANEOUS
50 plastic automotive skids, 45"x48" pallet, - 4 way pick up
4” NOMURA B-100WR, 50 taper,
72”x60”x49” travels, 55”x63” rotary
7055 Auburn Rd., Milton, ON L9T 7V9
Ph: (905) 876-0890 Fax: (905) 876-1959
Email: [email protected]
w w w. w a l k e r m a c h i n e r y. c o m
LEADING marketplace for NEW and USED machinery
Clue October, 2012
Page 9
Page 10
Clue October, 2012
USED
MACHINERY
Horizontal Lathes
Slant Turn 40N-ATC Millcenter 1000, Fanuc Control
MAZAK
RD&D
64" x 170", sliding bed type gap lathe, 16" hole through
spindle, GN10 CNC control, Stock No. 3849
63" x 236", C axis, live tooling on programmable turret,
SAFOP
Siemens 840C CNC control, Stock No. 3791
15” x 36”, LU-15 CNC Lathe, 1995, Stock No. 3580
OKUMA
29” swing, Turret Lathe, 6.25” hole through, Stock No. 3183
HITACHI
ANNN YANG 43” x 78”, FAGOR 8055i CNC control, chip conveyor, full
guarding, new in 2011.
Surface & Blanchard Grinders
ARTER
SHIBAURA
TOS
Rotary Surface, Horizontal Spindle, Stock No. 3827
48”, Model No. KRT-8D, Blanchard Style, Stock No. 3684
16” x 60”, Model BRH-40B, Excellent condition. Stock No.
3465
Machining Centres
SHARNOA
32" x 80", Model SVC80, Tiger 5 CNC control, 6600lbs table
capacity, very clean, Stock No. 3952
TOS
12” x 51”, Model FV 25, FAGOR CNC control, box ways,
priced to sell, Stock No. 3710
20” x 30”, Model MCV-760XL, FANUC 0 CNC Control, 20
position ATC, Stock No. 3453
LEADWELL
Cylindrical Grinders
SCHAUDT
B&S
TOS
TOS
130mm Spindle, Model WHN 13.8, 1994, Heidenhain 415 CNC,
New spindle, Stock No. 4030
UNION
80mm Spindle, Model BFT 80/2, cleaned, cycled and
painted. Stock No. 3408
130mm Spindle, Model KHT 130, Siemens 880 CNC,
Built in CNC Facing head, 2 pallets, very rare, Stock No. 3819
K&R
Milling Machines
HECKERT
DARBERT
KONDIA
KAO FUNG
10” x 48”, Brown & Sharp, Model 1048 Microstatic, Stock
No.3825
18” x 80”, B50U/2000 Universal Grinder, 1996, Stock No.
3683
Vertical Lathes
BERTHIEZ
Horizontal Boring Mills
13” x 27”, Universal Heavy Duty, Stock No. 3826
OLYMPIA
62" table, 75" swing, Model TVM 125, 1997, Fanuc 15T, 95kw
main spindle, Live tooling, tool and part probes, very heavy
duty, Stock No. 4079
66" Table, 72" swing. Model V60L, 1999, Fanuc 180i-T, Live
tooling, 32 position ATC, Stock No. 4080.
Miscellaneous
IEMCA
DANDREA
ERLO
DO-ALL
AMADA
PROGRESS
16” x 63”, Model No. FSS 440 V1/2, Heavy Duty, Universal,
Stock No. 3686
9” x 42”, Turret Style mill, Stock No. 3458
9” x 42”, Turret Style mill, Stock No. 3457
10” x 50”, Model KF-G-450, Stock No. 3456
Bar feeder, 2.55" bar capacity, 3600mm bar length , Stock
No. 4066
CNC facing head
Fixed Table Single Spindle drill
Horizontal Bandsaw, Model C-916A, Stock No. 3466
Punch Grinder, Stock No. 3463
Drill Press, Stock No. 3459
100" x 180" T-Slotted Floor plate, Stock No. 4068
54.5" x 60" T- Slotted Floor Plates, (4) total, Stock No. 3775
54.5 x 96" T-Slotted Floor Plates, (4) total, Stock No. 3774
Granite Table, 150" x 150", Massive!, Stock No. 3418
Subscribe to our mailing list
OTHER SERVICES
» On-Site spindle taper grinding
» Machine tool calibration and metrology
» Mechanical, Electrical and CNC field service
» Installations and plant moves
» Spare parts including exchange programs
» Authorized distributor for Heidenhain, Fagor, Fanuc FA,
Siemens and Renishaw.
» Certified Appraiser on staff
» Way Grinding
Clue October, 2012
“Since 1969”
7040 Fir Tree Drive, Mississauga, ON L5S1K6, Canada
Toronto Office: 905-676-9265 USA Office: 412-421-1211
www.dipaolocnc.com
[email protected]
Page 11
P U B L I C AU C T I O N S
ONSITE & LIVE WEBCAST!
Webcast powered by:
BID, BUY & GO!™
LIVE WEBCAST
5 MAJOR UPCOMING AUCTIONS!
ReGIONAL GRAPhIC FINISheRS
Late ModeL Bindery & Packaging FaciLity
Thursday, October 11 • 10:30 A.M. EDT • 398 Nash Rd., Units 9 & 10, Hamilton, ON L8H 7P5
10+ AVAiLAbLE
STAHL automatic folding line
12” X 14. 75” 15 STATiON CLAMP
MULLER MARTiNi saddle stitching line
SULby 4000 perfect binder
FEATURiNg: SULby 4000 perfect binder; MULLER MARTiNi saddle stitching line; (2) STAHL 30” X 45”automatic folding lines; STAHL 26” X 40”automatic folding line; STAHL
20” X 33”automatic folding line; STAHL 2.TFU 78/4DC folder; (2) STAHL 3.TFU 66/4FB folders; STAHL 3.TFU 56/4KB folder; STAHL 2.TS 36/4JJ folder; STAHL T36/4F folder;
STAHL EF 43 folder; STAHL SBP 46 horizontal stack delivery; STAHL M2222 shuttle feeder; STAHL STA 30 12” vertical stacker; SPLEK SL111M hydraulic 3 knife trimmer;
PoLar 115 EMC MONITOR 45.25” paper cutter; PoLar 92 CS 36” paper cutter; renZ (2007) AP360V4 fully automatic punching system; CHALLENgE MS 10A paper drill;
SiCKiNgER C81 double wire binder; SiCKiNgER MHP 17 paper punch & binding machine; SiCKiNgER TLB 13 twin loop wire binding line; ROSbACK 223A perforator;
bOSTiTCH #5 wire stitcher; CHALLENgE A paper jogger; daMark MINI PAK MS 1316 shrink wrapper; WraP-o-Matic T15 shrink wrapper; HyDROVANE 23K07-108
air compressor; cLark ESMII-15S 2525lbs. electric forklift; pump trucks, assorted wire binding inventory, dock plates, power tools, office furniture, computers & MUCH MORE!
ANThOS eNGINeeRING
LATE MODEL CNC MACHiNiNg AND FAbRiCATiNg FACiLiTy
Thursday, October 18 • 10:30 A.M. EDT • 7195 Tranmere Dr., Unit 4, Mississauga, ON L5S 1N4
5000 HRS
2001 6” X 6” X 1/2”
giLDEMEiSTER CTX-400 S2 CNC turning center
EDWARDS iron worker
1999
HyD CLAMP & FEED
HAAS VF3 CNC VMC
HyD-MECH H-12 horizontal bandsaw
FEATURiNg: giLDEMEiSTER (2001) CTX 400 SERIES 2 CNC turning center; HAAS (1999) VF-3 CNC vertical machining center; HyD-MECH H-12 horizontal bandsaw
with hydraulic clamping and bundling; WEbSTER & bENNET 48” vertical turret lathe; STANKO heavy duty lathe; BertraM heavy duty large center lathe; COLCHESTER
TRIUMPH 2000 tool room lathe; EDWARDS JAWS IV 100 ton ironworker; FiRST milling machines; radial arm drills, surface grinders, drill presses, heavy duty shop presses,
welders and welding equipment, plasma cutters, ridgid pipe threaders, power plate bending rolls, cLark forklift, overhead bridge cranes, (2) free standing overhead
crane systems, huge quantity of useable and scrap raw material including 6KG+ of silver ingots, late model office furniture and equipment & MUCH MORE!
CUSTOM MeTAL FABRICATING FACILITy
Late ModeL PLate roLLing and FaBricating FaciLity
Wednesday, October 17 • 10:30 A.M. EDT • 3595 St. Clair Ave., E., Unit 9, Scarborough, ON M1K 1L8
LATe MOdeL CNC TURNING ANd MAChINING FACILITy
LATE MODEL CNC TURNiNg AND MACHiNiNg FACiLiTy
Late October • 10:30 A.M. EDT • 40 Cardico Drive, gormley, ON L0H 1g0
PLEASE ViSiT OUR WEbSiTE FOR A COMPLETE LiSTiNg OF ALL UPCOMiNg SALES iN OCTObER & NOVEMbER!
www.corpassets.com • 416.962.9600
Page 12
Clue October, 2012
4 Littleleaf Crescent, Markham, ON L3S 4E9
Phone: 905-201-7841
Fax: 905-201-7842
[email protected]
www.haydenleemachinery.ca
Your Exclusive ACCURPRESS Dealer
CNC MODELS IN STOCK
40 - 2000 TON
Fe a t u r e s :
•
•
•
•
•
•
•
•
H I G H A C C U R A C Y 0 . 0 0 0 4 R E P E ATA BI L I T Y
X & R P R E M I U M G AU G E S
M U LT I-A X I S C N C G AU G I N G O P T I O N S
CNC CROWNING
L ASE R SAF E T Y
C O M P L E T E G UA R DI N G
Q U I C K R E L E AS E C L A M P I N G
G E N E R O U S O P E N H E I G H TS & T H R O AT
DE P T H S
• T H E H Y DR AU L I C S Y S T E M I S SP E C I F I C AL LY
DE S I G N E D F O R H I G H S P E E D, S Y N C H R O N I Z E D Y 1 / Y 2 P R E SS B R A K E S
• LO W- N O I S E H Y DR AU L I C S Y S T E M
• C SA C O M P L I A N T
F U L L C N C C O N T R O L L E R S W I T H FA S T A N D E A S Y S E T U P S
BA S E D O N T H E L AT E S T T E C H N O L O GY
“We Service What We Sell”
Clue October, 2012
Page 13
Infinity_Clue_October:Layout 1
9/27/12
10:54 AM
Page 1
CONSTRUCTION
MERGAD
Late Model Rolling Stock &
Construction Equipment
AUCTION: Wednesday October 10 @ 12:00 PM
Inspection: Wednesday October 10, 9 AM to 12 PM
Assets Relocated To: 20425 Avenue Clark Graham,
Baie D'urfé, (Montreal), Quebec, Canada
PIAZZA
TOMASSO
Late Model Prepared and Frozen Italian
Foods Manufacturing Facility
AUCTION: Thursday Oct 11, 10:30 AM
Inspection: Wednesday Oct 10, 9 AM to 4 PM
Sale In Conjunction With Goindustry Dovebid
FEATURING:
• 2008 HITACHI Hydaulic Excavator, Model ZX350 LC-3
• 2006 LINK BELT Hydraulic Excavator, Model 330LX
• 2007 MACK T/A Truck Tractor, Model CL-700
• 2009 JCB 4X4X4 Loader Backhoe, Model 4CX15
• 2008 JCB Smooth Drum Vibratory Roller, Model VM750
• 2007 CATERPILLAR Crawler Tractor, Model D5G-XL
• REMFAB 50 Ton Tri-Axle Low Boy Trailer, Model RD80-55A20
• 2007 GMC Cube Van, Model Savana G3500 (1 of 2)
• HYSTER Forklift, Model H110XL, 11,000 Lb Capacity
20425 Avenue Clark Graham, Baie D’Urfe, Quebec
Sale In Conjunction With New Mill Capital And M. Davis Group
FEATURING:
• (3) Complete Pasta Production, Sauce and Ingredient Lines
• 2007 Like New LYCO Clean-Flow Cooker Cooler System
• Late Model TECHNOPOOL SS Spiral Freezer
• WAUKESHA CB 12-Pass Tube in Tube Pasteurizer
• (20) Cook Cool SS Cone Bottom Sweep Scrape Processors,
as New as 2009
• (3) 2009 400 and 100 Gallon Tilt Out Sweep Scrape Kettles
• (2) 2008 RISCO RS 205/80 Vacuum Stuffers
• 2007 MULTIPOND 12-Bucket Scale System
Late Model HAAS CNC Machining Facility • 2000 SS Dicers and Cheese Shredders
• 2008 SS Single Shaft Paddle Mixer
AUCTION: Tuesday October 16 @ 10:30 AM
• WEILER and BIRO Meat Grinders
Inspection: Monday October 15, 9 AM to 4 PM
394 Sherman Avenue North, Unit 4, Hamilton, Ontario • (8) Electric Tilt Braising Tables
• WCB PD and Progressive Cavity Pumps
FEATURING:
• VOMM 2-Zone Jacketed Turbulizer
CNC Lathes:
• 2010 ISHIDA SS Checkweighers
• 2006 HAAS Model SL-30
• Late Model SAFELINE and LOMA Metal Detectors
• (2) 2007 HAAS Model SL-20
• Late Model SHANKLIN Flow Type Shrink Wrappers
• 1997 HAAS Model HL1
• NORDALE and CONSOLIDATED Cartoners
• (3) HAAS Servo Bar 300 Barfeeds As New As 2007
• 2010 VIDEOJET Laser Coders
CNC VMC’s:
• Plant Ammonia System, Air Compressors and Boilers
• 2001 DECKEL MAHO Model DMU 35M
• Maintenance and Spare Parts Inventory
• 2000 HAAS Model VF2
• Rolling Stock and Storage Trailers
• HAAS Model VF-E
High End Office Furniture and so much more...
CNC HMC:
• 1999 DECKEL Model DMC60H
ALL AUCTIONS
• (3) Forklifts Up To 14,600 lb Capacity!
• PLUS: Ironworker, Saws, Lathe, Mill, Skid Steer, Welders, BID LIVE ONSITE
& ONLINE VIA
Positioners, CMM’s, Precision Inspection, And More.
MAXIMUM PRECISION
AUCTIONS • LIQUIDATIONS
FINANCING • APPRAISALS
infassets.com
Page 14
905.669.8893
Like us at: facebook.com/
Infinity-Asset-Solutions-Inc
Follow us at: twitter.com/
InfinityAssets
Clue October, 2012
SALES & SERVICE
1-888-BW-GUILD
DMC4000 5-FACE
DOUBLE COLUMN MILL
NEW
in
STOCK
TMV-1050AII
• X - 1050 mm
• Y - 600 mm
• Z - 530 mm
BARRY GUILD
Office: 519-624-9806
Cell: 519-654-6094
[email protected]
Clue October, 2012
YV-1200ATC
• Table 1250 mm
• Swing 1600 mm
• Height 1200 mm
B.W. GUILD EQUIPMENT INC.
5 Cochran Drive, Bdlg A, #4
Ayr, On. Canada N0B 1E0
at hwy 401 and hwy 97
Page 15
HBA-110T-R2
CNC Table Type Horizontal Boring
& Milling Machine
HBA-110T-R3
HBA-135P-R5
CNC Rotary Table Type Horizontal
Boring & Milling Machine
CNC Planer Type with Rotary Table
Horizontal Boring & Milling Machine
Nomura CNC Horizontal Boring & Milling machines are skillfully designed and
superbly crafted to provide decades of accurate and trouble-free operation.
Nomura HBM machines are engineered for
long-term accuracy. Features like a consistently
straight nitride-hardened spindle and rigid
construction are your assurance of virtually
error-free machining of costly materials for
many years to come.
To learn more about how you can get lasting
precision from Nomura, give us a call.
Model
HBA-110T-R2
HBA-110T-R3
HBA-135P-R5
Spindle Dia.
4.33”
4.33”
5.31”
Spindle Speed
5-3,000 rpm
4,000 rpm
3,000 rpm
X/Y/Z Travel
51”x 46”x 34”
78”x 60”x 55”
118”x 90”x 55”
Spindle Travel
15”
20”
27.5”
Table Size
45”x 45”
55”x 63”
71”x 79”
Load Capacity
6,613 lbs.
15,400 lbs.
33,000 lbs.
Drive Motor
25 HP
30 HP
60 HP
Torque
1,071 ft.lb.
2,615 ft.lb.
2,922 ft.lb.
Larger table types and floor types are also available.
1-589 Middlefield Rd, Toronto ON M1V 5B8
Phone: 416-291-9499 Fax: 416-291-4990
Email: [email protected]
Web: www.compumachine.ca
in
Machines w
Stock No
Canadian Distributor for Nomura Machine Works
Page 16
Clue October, 2012
LARGE CAPACITY MACHINE LIQUIDATION
1991 Giddings & Lewis MC 50
1984 Toshiba BTD11B-R3 CNC HBM
5” CNC Horizontal Boring Mill with Fanuc
18i CNC Control and 2 pallet pallet
changer, X axis 72”, Y axis 54”, W axis
(spindle) 36”, Z axis (saddle in/out) 50”,
Pallets 48” sq. x 2, 15,000lb table
capacity, B axis rotary table with scale,
Coolant through spindle, 100atc,
Complete new Fanuc 18i retrofit 2008,
Heidenhain scales. 3000rpm, Very good
condition, 2 machines available.
Tosnuc 3, Rotary Table size 55x63”,
X axis 70”, Y axis 59”, Z axis 57”, spindle
diam 4.3”, Pendant Control
1997 DAEWOO Ace H-100 Horizontal
Machining Center
Fanuc 16M, X axis 80”, Y axis 49”, Z axis
44” #50 taper geared head. 40” pallets
APC-2, 90 ATC
VERTICAL MACHINING CENTERS
• 2002 HURCO VMX 24, ATC 24, Ultimax CNC Control
• 2000 Yamage (Made in Japan) GP 800 CNC Vertical
Machining Center, Fanuc 18i M CNC control, Fanuc HPCC
high speed machining package, 50hp, 6000rpm, ISO Cat
#50 taper, ATC 24, X axis 82”, Y axis 32”, Z axis 32”, table
size 96” x 32” Heavy 6 box way bed design, great die sinker,
great condition, low price.
2000 Daewoo Mynx 500 CNC Vertical Machining Center with
Fanuc 21 M CNC Control, ATC 24 6000 rpm ISO Cat #40
taper, X axis travel 40”, Y axis travel 20”, Z axis travel 20”,
Table size 48” x 20” Low hours excellent condition.
• 2000 NTC NV 4G CNC vertical machining center. APC-2
with Fanuc 21i-M Control, Table size (2)20” x 18”, X axis 20”,
Y axis 17.7”, Z axis 17.7”, ISO # 40 taper, 8,000rpm,Cat
tooling ATC 25, full enclosure, chip conveyor
• 1998 Famup MCX 1000 Dual pallet VMC, Fanuc 0M,
20”x40” pallets x2, full enclosure, chip conveyor, ATC 30
tools, Very nice condition, low
price.
• 1999 CINCINATTI Milacron
Lancer 1250 X axis 50”, Y axis 30”,
Z axis 30”, #50 taper, Acramatic
2100 CNC Control, Coolant
through spindle, chip
conveyors.ATC 30 Low hours.
DOUBLE COLUMN VERT. MACHINING CENTERS
• 2007 Eumach Model DVM 5030,
Table size...5000mm x 2600mm
Table Capacity 20 tons X-Axis
5200mm Y-Axis 3100mm Z-Axis
700mm B-Axis 2.5 degree, (Fully
programmable) Heidnehain TNC
i530, 180 tool Magazine, 2 axis
universal head is CNC controlled
with coolant through spindle, Reinshaw Touch Probe.
BORING MILLS
• 2002 STANKO 5” Fagor CNC control, X axis 80”, Y axis
55”, Z axis 40”, W axis 27”, 2500rpm, Rotay table 50” sq,
table capacity 5000kg, coolant system. Great price
• 1999 Stanko , CNC 6” Horizontal Boring Mill with Fanuc
15M CNC Control, X axis 2m, Y axis 2m, Z axis 1600mm,
w-axis 900mm, table size 63” x 71” 12 ton load on built in
rotary table. 1200rpm, #50 taper, 40hp, Heavy machine low
price.
• 1999 Stanko , CNC 6” Horiz. Boring Mill with Fanuc 15M
CNC Control, X axis 2m, Y axis 2m, Z axis 1600mm, w axis
900mm, tbl size 63” x 71” 12 ton load on built in rotary table.
1200rpm, #50 taper, 40hp, Heavy machine low price.
• 1994 Toshiba BTD 13 R22, CNC 5” Horiz w/ Tosnuc 777, X
axis 3m, Y axis 2m, ATC 60, table size 70” x 86” 12 ton load
on built in rotary table
• 1992 Toshiba BTD 11E R16, 4” CNC Horizontal Boring Mill
with Tosnuc 777 CNC control. X axis 78”, Y axis 59”, Z axis
57”, 2500rpm, built in rotary table 55”x 63”, 14,000lb table
capacity, ATC 40.
MILLING MACHINES
• 1994 Hermle UWG 851 CNC Universal w/ Heidenhain TNC
415 Control. Tilting vert. head with quill, horiz. spindle, ISO
#40 taper, power drawbar, 4500rpm, 10hp, X axis 24”, Y axis
18”, Z axis 16” excellent cond. with low hrs & low price.
• VERTICAL BED MILL, X-55” Y-25”, 40tpr, pwr drawbar,
rapids, Heid 3-axis DRO, Coolant system, 4000rpm, like new
CNC LATHES
• 2012 Mazak Nexus 450 2KY Big Bore 7”, 50hp, Schunk
18” air chuck, plus rear mounted chuck, Tooleye, Chip
conveyor, 2 MACHINES AVAILABLE NEVER BEEN USED
• 2007 GILDEMEISTER CTX 410 with C axis live tooling,
Fanuc 32i Control Chip Conveyor
• 2004 Daewoo Puma 240L CNC Lathe with SMW
Spacesaver barfeeder, Fanuc 21i T Control, Chip conveyor,
some tooling, very clean machine.
• 2000 Daewoo Lynx 200 CNC Lathe with Fanuc 21i T CNC
Control, 6” chuck, tailstock, tool eye, very low hours,
excellent condition
• 2000 NaKamura Tome WT 250 CNC Lathe with Fanuc 18i
T CNC control, sub spindle, upper and lower turrets, 2.5” bar
capacity, gantry loader, part catcher/conveyor, chip
conveyor, some tooling available.
• 2000 LEADWELL LTC 50 CXL, Fanuc 0-T, 15”chuck,
3000mm centers, SMW Steady rest, Tailstock, Chip convyr,
12 Stn Turret
• 2004 Daewoo Puma 230 CNC Lathe with barfeeder, Fanuc
21i T Control, Chip conveyor
• 1999 COLCHESTER
CLAUSING MASCOT, Fanuc
20T teach type CNC control.
12" chuck, 18" swing, 80"
centers, Very nice condition w/
low hours
• AMERICAN 32205 x 120, 32”
swing, 120” centres, 15” chk,
Hyd tailstock, 4 post auto index toolpost, Fagor 8055 CNC
cntrl, Chip conveyor, great cap., good condition, low price
1991 Toshiba BF 130A
5” Floor Type CNC Horizontal Boring mill,
with Fanuc 15m CNC Control. X axis
9000mm, Y axis 3000mm, Z1 axis
450mm, Z2 axis 1000mm, 40Hp, rotary
table 2000mm x 2500mm 25 ton capacity,
table slide 1450mm.
• 1998 MAZAK SQT 28MS C axis live tooling, sub
spndl, chip conveyor and Flex GL 200N gantry
loader, 2 machines avail.
• 1995 HWACHEON ECO 2sp twin spindle,
4500rpm, 2-10”chuck, chip conveyor, twin 10 tool
turret, Fanuc O-T ctl
• 1997 Mori Seiki SL 200 CNC lathe with Mori Fanuc
MSC 518 ll CNC Control, 8” chuck, Chip conveyor
• 1994 Mori Seiki CL 20a CNC lathe with Fanuc MF
TB control, parts stacker, gantry loader, chip
conveyor
ENGINE LATHES
• 1980 Gildemeister
Hamburg 840 Engine
lathe, 32” chuck, 120”
centers, steady rest,
tailstock, Fagor DRO,
enclosure. Heavy duty
machine
• TOS SU 125 32”
chuck, 50” swing, 8000mm distance between
centers, steady rests, tailstock, coolant system, Trak
2 axis DRO, very nice condition
• POREBA TR 100 32” chuck, 60” swing, 4000mm
distance between centers, steady rest, tailstock,
coolant system, trak 2 axis DRO
centers
PRESS BRAKES
• HURCO 65-25 Up stroking 6ft, Hurco Autobend 7
CNC Backgauge
• AMADA RG 25 4ft Upstroking, Hurco Autobend 5C
CNC Backgauge
• CINCINATTI 8ft Down stroking, Cincinatti CNC BG
CNC GRINDERS
• 1993 Shigiya G-20ND, CNC Universal Cylindrical
Grinder with Fanuc
18GC Control, 8” swing,
20” centers, swivel
head. Internal
attachment. Very low
hours excellent
condition
CNC DRILL TAP
CENTERS
• 1996 Miyano TSV 35E CNC Drill tap center with
Fanuc 21 M Control, ISO #30 taper, 12 tools.
Ontario Distributor
1-589 Middlefield Rd, Toronto ON M1V 5B8
Phone: 416-291-9499 Fax: 416-291-4990
Email: [email protected]
Web: www.compumachine.ca
CNC
Clue October, 2012
Machine Tools
Page 17
B1480 BENDERS
B7000 BRAKES, PRESS
CLASSIFIED -
LISTING YOUR MACHINERY AND EQUIPMENT TODAY
LEADS TO SUCCESSFUL SALES TOMORROW
Don't Delay! Phone: (905) 528-7765
B1480 BENDERS
33 Ton STIERLI-BIEGER, 300HE/CEB9, 2", Hyd, Pipe/Tube bender,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
B5400 BORING MILLS, HORZ, FLOOR
5" UNION, BFP130, Ref# 3481, $75,000, (Turners Machinery Inc.
Tel: 805-525-2171, Fax: 805-525-5683)
5" UNION, BFP130 CNC, X-180" Y-98" Z-39" W-14", c/w Heidenhain
TNC 425 4-Axis, (Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
HURON, LU9320A, Location: Toronto Ref# 3563, $49,500, (Turners
Machinery Inc. Tel: 805-525-2171, Fax: 805-525-5683)
B5500 BORING MILLS, HORZ, TABLE
4" STANKO, , Rotary Table, ISO 50, 3-Axis DRO, (Boulanger
Machinerie Inc Tel: 418-428-4709, Fax: 418-428-4710)
4" TOS, W-100A, (Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
4.33" TOSHIBA, BTD11-ER16, X-78.74" Y-59" W (Saddle)-78.74",
Tosnuc 777, 4-Axis, 40 ATC, B-axis Rotary tbl, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
5" HAZZATI, , Table type, X-96" Y-72", 48"x 100" table, 1500rpm,
(Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
5" UNION, BFT 125/5 (1976), 71"x 79", XYZ-100"x 79"x 71", Rot tbl,
fcg hd, mlg hd, Ref# 2376, (B F G Machine Tools Inc.
Tel: 780-434-7795, Fax: 780-436-0717)
5.12" TOSHIBA-SHIBAURA, BF-130A, Fanuc 15M, X column trvl
275.59", Y-188", (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
B6006 BORING MILLS, VERT
55" Table BERTHIEZ, , 68" Max Swing, 48" Under rail, Side-Head,
RPM (.4-160), (Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
72" GIDDINGS & LEWIS, , CNC Control w/Milling spindle in RAM
VBM, Ref# 3417, $95,000, (Turners Machinery Inc.
Tel: 805-525-2171, Fax: 805-525-5683)
Fax: (905) 917-0222
80 Ton x 8’ AMADA, HFBO-8025 (1998), CNC, 8-Axis, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
88 Ton AMADA, FBD8020, NC9F CNC Backgauge, Ref# 9275,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
88 Ton AMADA, RG80 (2000), NC 9EXII 3-axis, Ref# 9491, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
88 Ton AMADA, FBD8025NT (2000), AMNC-PC, Mint Condition,
Ref# 9488, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
88 Ton x 82" AMADA, RG-80S, CNC, w/NC9-EXII 3-Axis Control,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
88 Ton x 8’-6" “NEW” FERRIC, Power Bend 2600-80, 3-axis,
CZ-142-04 compliant, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
110 Ton AMADA, HFE1003 (2006), Operateur CNC Backgauge,
Ref# 9158, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
110 Ton AMADA, FBDIII1030NT (2000), Ref# 9539, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
110 Ton AMADA, RG100 (1996), NC9EXII 3-Axis BG, Ref# 9141,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
110 Ton x 10’-8’6" DURMA, (2001), X-R Backgauge, DA65 control,
(Ferric Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
120 Ton x 12’ ALLSTEEL, 120-12, Hyd, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
120 Ton x 12’ ALLSTEEL, , 2-axis Automec CNC Gauge, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
130 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
132 Ton x 10’-8’6" ERMAK, (2005), X-R Backgauge, Modeva 10S
Graphic control, Manual Crown, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
135 Ton CINCINNATI, 135CBII8 (1995), Cincinnati CBII CNC, Ref#
9542, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
135 Ton TRUMPF, C120 (2006), 122" OA, CNC Back Gauge, Ref#
9490, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
135 Ton x 122" TRUMPF, C120 (2006), 4-axis CNC Gauge, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
138 Ton AMADA, FBD1253NT (2007), Up-Acting CNC, Ref# 9326,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
143 Ton x 165" AMADA, HFE1304 (2005), w/Operateur Multi-axis
CNC Back Gauge, Ref# 9444, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
150 Ton x 10’-8’4" HACO, ERM 30135, CNC, BC55 2D Graphic,
Manual Crown, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
150 Ton x 10’ HACO, ERM 30135 (2001), CNC 3-axis, Safety lights,
Manual crowning, Guarding, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
150 Ton x 8’6" - 6’6" HACO, , Manual crowning, backgauge: 39",
BC40 2D Graphic control, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
151 Ton SALVAGNINI, CPR135-3000 (2003), Roboformer Bending
Cell, Ref# 9521, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
175 Ton ALLSTEEL, 175T-10 (2004), Automec CNC 250 2-Axis,
Ref# 9511, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
175 Ton x 12’ ALLSTEEL, Automec CNC150 (2002), 2-Axis ctrl,
Light curtains, Guarding, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
176 Ton x 10’-8’4" “NEW” FERRIC, Power Bend 3100x160, 3-Axis,
CZ142-04 Compliant, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
176 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-160, 3-axis,
CZ-142-04 compliant, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
187 Ton AMADA, HFB 1704 (1993), Operateur CNC, w/New TFT
Retrofit, Ref# 9430, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
187 Ton AMADA, HFB 1704 (1995), Operateur CNC, Ref# 9454,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
200 Ton x 12’ PIRANHA, RAM, CNC 1-axis, New, Must be sold Make an offer, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
200 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
220 Ton x 12’-10’ “NEW” FERRIC, Power Bend 3600-250, 3-axis,
CZ-142-04 compliant, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
242 Ton AMADA, HFE2204/7 (2006), Operateur, Rare Find, Ref#
9082, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
242 Ton AMADA, HFB2204 (1993), Operateur 5-axis, Ref# 9505,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
B7000 BRAKES, PRESS
15 Ton x 4’ WYSONG, , Mech, CNC, Single Axis, (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
20 Ton x 4’ ALLSTEEL, , Light curtain, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
38.5 Ton AMADA, RG3512LD (2001), LD 2-Axis CNC BG, Ref#
9421, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
38.5 Ton AMADA, RG3512M2 (2009), AMNC-IS CNC, BG, Ref#
9566, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
38.5 Ton AMADA, RG35S (1988), NC9EX, Ref# 9104, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
55 Ton AMADA, RG50 (1988), Autogauge 99 Back gauge, Ref#
9134, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
55 Ton AMADA, RG50 (1997), NC 9EXII, Ref# 9492, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
75 Ton x 10’ “NEW” ACCURPRESS, , CNC, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
80 Ton x 8’ AMADA, ITPS 08025 (1989), 4-axis, Good Price,
(Machinery S. Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
PAGE 18
CLUE, October 2012
B7000 BRAKES, PRESS
250 Ton x 12’ “NEW” ACCURPRESS, , CNC, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
500 Ton x 20’ PACIFIC, K500-20 (1974), Ref# 9560, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
D5700 DRILLS, RADIAL
2-1/2’ Arm KAO MING, KMR700DS, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
4’ arm KITCHEN & WADE, , MT5, 2" capacity, Must be Sold,
(Machinery S. Tremblay Tel: 819-477-6677, Fax: 819-477-6466)
5’ arm STANKO, 2M55, MT5, 2"capacity, 575 volts, mint condition,
Must be Sold, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
D7000 DRILLS, MISCELLANEOUS
QUICKDRILL, 96-180, X-180" Y-96" Drilling machine, Ref# 3462,
$49,500, (Turners Machinery Inc. Tel: 805-525-2171,
Fax: 805-525-5683)
F5006 FURNACES
Heat Treating , New & Reconditioned, Powered by Electric, Gas, Oil,
Propane, for all purposes, (Park Thermal International
Tel: 905-877-5254, Fax: 905-877-6205)
G4306 GRINDERS, CENTERLESS
ROYAL MASTER, CG-12X4, CNC, .004" - 1.5" Cap, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
G4706 GRINDERS, CYLINDRICAL
10"x 30" TOS, BUAJ28, Mint, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
G8025 GRINDERS, SURFACE, RECIPROC
12"x 24" PROTH, , Hyd, Electro-Mag chk, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
12"x 24" PROTH, , Hydraulic, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
G9030 GRINDERS, MISCELLANEOUS
10"x 16" HAUSER, , Jig grinder with DRO, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
K3004 KEYSEATERS
DAVIS, No.5, Cap. Keyway cutting 1/16" to 1-1/2", (Trader Machinery
Inc Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MITTS & MERRILL, No.2, 1-1/4" max width x 12" max length,
w/tooling, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
L0850 LASERS
100 Watt DECKEL, DML40si (2003), 5 Axis, Class 4, Lasersoft 3D
control, X-15.7" Y-11.8" Z-19.7", (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1500 Watt MAZAK, STX510 (1999), 5’ x 10’, Approx. 70,00hrs,
Mazak Refurb 2010, Ref# 9230, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
2000 Watt MITSUBISHI, (2001), 5’x 10’, Mitsubishi LC20BP
Control, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
2000 Watt TRUMPF, L2510 (2004), Load/Unload Cell, Ref# 9322,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
2000 Watt AMADA, LC1212XL (2002), 4’x 8’, 34,154hrs, Ref# 9381,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
2000 Watt AMADA, Pulsar LC1212XLA3 (2003), 4’x 8’, Ref# 9272,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
2000 Watt AMADA, Pulsar LC2415XLA2 (1998), Fanuc 16L CNC,
Installed 1999, Ref# 9538, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
2200 Watt BYSTRONIC, Byvention 3015 (2006), Ref# 9124, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
2500 Watt BALLIU, CF1500 (2000), 5’x 10’, 8000hrs, Ref# 9156,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
2500 Watt AMADA, Pulsar LC2415NT (2008), Ref# 9045, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
3 KW MITSUBISHI, ML3015LXP (1997), 5’x 10’, LC10BV Control,
Ref# 9436, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
3300 Watt CINCINNATI, CL707 (2004), 5’ x 10’ dual pallet, Ref#
9548, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
4000 Watt AMADA, Pulsar 1212NT (2007), Installed 2008, extremely
low hrs, Ref# 8756, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
CLUE, October 2012
L3000 LATHES, ENGINE
ADVERTISERS DIRECTORY
COMPANY
PHONE
FAX
PAGE
Alberta
B F G Machine Tools Inc., Edmonton (Brian).........................................780-434-7795..........780-436-0717..........18
British Columbia
Modern Tool (BC) Ltd, Port Coquitlam (Pam)........................................604-472-1444..........604-472-1455..........23
Ontario
B W Guild Equipment Inc, Kitchener (Barry)..........................................519-893-3546..........519-893-3125..........15
Brighton Machinery Sales Inc, Ingersoll (Brian).....................................519-485-7089..........519-485-7368..........18
Compumachine Canada, Toronto (Peter) ..............................................416-291-9499..........416-291-4990..........16
Corporate Assets Inc, Toronto (Daphne) ...............................................416-962-9600..........416-962-9601..........12
Dipaolo CNC Retrofit Ltd., Mississauga (Nelson) ..................................905-676-9265...........................................10
Fabtec Machine Tool Solutions Inc, Oakville (Raj)..................................905-469-1586..........905-469-3054..........18
Ferric Machinery Inc, Mississauga (Koen) ............................................877-337-7424..........905-820-3234............1
Haco Canada, Mississauga (Francis)....................................................905-828-1087..........905-828-2062............7
Havlik Int’l Machinery, Cambridge (John)..............................................519-624-6240..........519-624-4119..........26
Hayden Lee, Markham (Hayden) ..........................................................905-201-7841..........905-201-7842..........13
Infinity Assets Solutions, Concord (Leslie)............................................905-669-8893..........905-669-7512..........14
L S Walker Machine Tools Inc, Milton (Chris)........................................905-876-0890..........905-876-1959............9
Machine Solutions Inc., Guelph (Andrew) .............................................416-276-0596...........................................20
Micro Trend Robotics Inc, Pickering (Peter) ..........................................905-509-1218..........905-509-2687..........18
Nimesch Machinery, Markham (George)...............................................416-786-7762..........905-415-3868..........25
Park Thermal International, Georgetown (Sales)....................................905-877-5254..........905-877-6205..........18
Paul Machinery, Burlington (Paul) .........................................................905-634-8442..........905-681-6940..........24
Phase Quest, Mississauga (Harold) ......................................................416-578-5399..........416-753-7209..........18
Powermaster Machinery Ltd, Mississauga (Peter) ................................905-624-9327..........905-624-8591............6
S K Braly Machinery Inc, Mississauga (Steve) ......................................905-793-8080..........905-793-2190..........24
SMTCL Canada Inc., Oakville (Merry) ...................................................905-829-1579..........905-829-8692..........27
Sabito Machinery Inc, Vaughan/Concord (David) ..................................905-738-8730..........905-738-5148..........22
Stevens Machinery Sales (2005) Inc, Toronto (Andrew) .......................416-798-3611..........416-798-8439............8
TCL Asset Group Inc, Toronto (Norm)...................................................416-736-1367..........416-736-4159..........25
TOS Trade Canada Inc., Milton (Marian) ...............................................905-878-0888..........905-878-9022..........28
Trader Machinery Inc, Concord (Jonathan) ...........................................905-669-7507..........905-669-7512............4
Quebec
Boulanger Machinerie Inc, St-Ferdinand (Ben) ......................................418-428-4709..........418-428-4710..........18
Machinerie Gilles Lupien, Drummondville (Gilles)..................................819-478-5266..........819-478-5266..........18
Machinery S. Tremblay, Drummondville (Sylvain) .................................819-477-6677..........819-477-6466..........18
Seguin Machinery Ltd, Vaudreuil-Dorion (Noel).....................................514-935-3531..........514-932-4459............2
Stock Machine Tools Co, Laval (Andre) ................................................514-326-7006..........514-329-2599..........18
Talbot Associes Encanteur Inc, St-Jean sur Richelieu............................450-347-2233...........................................25
USA
Jordan Craig Machinery Int’l Inc, New City (Jordan) .............................845-398-0073..........845-398-0074............3
Turners Machinery Inc., Santa Paula, CA (Rosa)...................................805-525-2171..........805-525-5683..........18
4000 Watt AMADA, Gemini FO-3015NT (2006), 5’ x 10’, approx.
25000hrs, [email protected], Ref# 9547, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
4000 Watt AMADA, Pulsar 2415NT4, Installed May 2007, Ref#
9552, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
4000 Watt AMADA, Gemini FO4020NT (2005), 6’x 12’, Approx. 25,
000hrs, Ref# 9474, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
4000 Watt TRUMPF, TCL3030 (2002), Siemans, 5’x 10’ Dual pallet,
Ref# 9561, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
4000 Watt TRUMPF, TCL3030 (2002), Siemans, 5’x 10’ Dual pallet,
Rotary Axis, Ref# 9562, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
4500 Watt AMADA, FOL3015NT (2006), Approx. 17,000hrs, Ref#
9364, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
5000 Watt TRUMPF, L3050 (2003), Siemens, 5’x 10’, 36,000hrs,
Ref# 9440, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
6000 Watt TANAKA, LMX V30-TF6000B (2003), 10’x 30’, Fanuc
16IL, Ref# 9528, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
L3000 LATHES, ENGINE
6"x 18" ACRA, , Toolroom lathe, DRO, Hardinge type - like new,
(Powermaster Machinery Ltd Tel: 905-624-9327,
Fax: 905-624-8591) See Page 6
12"x 36" LOGAN (by Powermatic), 2557 VLH, Variable speed, 3 & 4
jaw chucks, collets., (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
16"x 50" COLCHESTER, Triumph 2500, 2001 & 1990, Vari speed
control, 6-jax chk, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
17"x 40" HOWA, , (Powermaster Machinery Ltd Tel: 905-624-9327,
Fax: 905-624-8591) See Page 6
18" x 60" “New” POWERTURN, 460, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
185"x 68’cc BERTRAM, , under power, (Boulanger Machinerie Inc
Tel: 418-428-4709, Fax: 418-428-4710)
21"x 60" OKUMA, , (Powermaster Machinery Ltd Tel: 905-624-9327,
Fax: 905-624-8591) See Page 6
23"x 80" VDF, E3H (1976), 14"OCS, 3-1/8"sp bore, 15hp. taper,
Ref# 2033, (B F G Machine Tools Inc. Tel: 780-434-7795,
Fax: 780-436-0717)
28"x 100" LE600R, 4" Spindle, c/w 3 Jaws, 4 Jaws, Taper, $3,900,
(Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
32"x 180" SHYE SHING, , Clearance Price - $19,500, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
40"x 160" POTISJE (SIRCO), PA1000, Demo, 50hp, 575 Volt, 5-7/8"
Spindle bore, (GH Machine Works Co. Ltd. Tel: 905-564-0792,
Fax: 905-564-6076)
63"X 106" BOKO, D82H, Semi-Automatic Spinning lathe, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
90"x 33’cc CRAVEN, , c/w 2 carriages, 60hp, Cap. 50 ton,
(Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
PAGE 19
L6135 LATHES, N/C & CNC
P9275 PUNCHES, TURRET
+
L6135 LATHES, N/C & CNC
MAZAK, Integrex 200Y (1998), 40 ATC, 40"cc, Fusion 640, B-axis,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
16"x 40" MICROWEILY, TY-1540D (2007), Teach-Turn CNC
toolroom, Fagor 8055TC, 7-1/2" 3 jaw chk, V8 hyd turret, Ref#
2331, (B F G Machine Tools Inc. Tel: 780-434-7795,
Fax: 780-436-0717)
20.87"Sw, 23.62" Turn length OKUMA, LU15-MW (1997), Live tool,
Twin turret, sub spdl., (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
M0130 MACHINING CTRS, HORZ
MATSUURA, H Plus-630, new 2002 only 9450hrs, Fanuc 16 IBM,
Full 4-axis, X-41" Y-36" Z-34" B Axis:360, (Machinerie Gilles
Lupien Tel: 819-478-5266, Fax: 819-478-5266)
OKK, MCH800 (1985), X-79" Y-40" Z-32", 3000rpm, 50 ATC, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
M0185 MACHINING CTRS, VERT
BOSTOMATIC, BD18-1 (1999), Z-17.7" Y-11.8" Z-17.7", 10,000rpm,
ATC 18, CAT 20, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
MIKRON, UCP600 Vario (2006), X-23.6" Y-17.7" Z-17.7", 5-Axis, 20,
000rpm, Heidenhain iTNC530, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
MAKINO, S33 (2005), X-25.6" Y-19.7" Z-17.7", Pallet changer,
Professional 3 CNC control, CTS, 8980 Spdl hrs, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
CHIRON, (2005), X-78.8" Y-16" Z-16", Fanuc 18I, 12" Tsudakoma,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
OKK, MCV-860 (1998), X-80.31" Y-33.86" Z-28.35", 20" 4th-Axis
rotary, CTS, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
KOMO, VMC 50/160 (1997), X-160" Y-32" Z-32", Ref# 9563, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
KOMO, VMC 50/120 (1997), X-120" Y-32" Z-32", Ref# 9564, (Jordan
Craig Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
M1550 MILLS, CNC
10"x 50" TOPWELL, 5VK (1996), Anilam 1100 CNC control, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
28"x 84" LAGUN, F.B.F (2000), Bed Type, control Heidenhain 415,
(Boulanger Machinerie Inc Tel: 418-428-4709,
Fax: 418-428-4710)
M1659 MILLS, UNIVERSAL
12"x 50" TOS, FGU32, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
12"x 54" HOWA, , (Powermaster Machinery Ltd Tel: 905-624-9327,
Fax: 905-624-8591) See Page 6
13"x 63" LAGUN, FU3-LA, ISO 50, Horiz/Vert, swivel table, 575v,
w/tooling, (Machinery S. Tremblay Tel: 819-477-6677,
Fax: 819-477-6466)
M1974 MILLS, HORIZONTAL
12"x 52" FEXAC, UM, 7-1/2 hp, (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
12"x 54" DORMAC, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
12"x 54" ADCOCK & SHIPLEY, , (Powermaster Machinery Ltd
Tel: 905-624-9327, Fax: 905-624-8591) See Page 6
23"x 95" CINCINNATI, 525-20-HP (1964), powered vert o/a, #50
taper, pendant, Ref# 2288, (B F G Machine Tools Inc.
Tel: 780-434-7795, Fax: 780-436-0717)
M2075 MILLS, PLANER TYPE
64"x 244" STANKO, 7216-G (1982), 56"x 238"tbl, 71"btwn col,
58"max UR, gr hd, mlg hd, plr hd, side hd, Ref# 2399, (B F G
Machine Tools Inc. Tel: 780-434-7795, Fax: 780-436-0717)
M2824 MILLS, VERTICAL
9"x 48" EXCELLO, , feed, DRO, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
10"x 50" FIRST, LC-185VS, DRO, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
12"x 53" DAH-LIH, DL-GH950, Universal, 40 taper, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
N5230 NOTCHING MACHINES
1/4" x 8.6"sq (NEW) FERRIC, , variable angle, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
1/4" x 8.6"sq (NEW), , Fixed angle, (Ferric Machinery Inc
Tel: 877-337-7424, Fax: 905-820-3234) See Page 1
PAGE 20
20
Page
O7397 OVENS
Ovens
For Powder Coating, Aging,
Stress Relief, Normalizing
Gas or Electric
Numerous Sizes Available
Call: 905-702-4644
New & Reconditioned , Powered by Electric, Gas, Oil, Propane,
(Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
P6100 PRESSES, OBI
60 Ton BLISS, C-60, 4"stk, A/C, (Brighton Machinery Sales Inc
Tel: 519-485-7089, Fax: 519-485-7368)
60 Ton BROWN BOGGS, 17 1/2J, (2) 5" stk, A/C, (Brighton
Machinery Sales Inc Tel: 519-485-7089, Fax: 519-485-7368)
P9050 PUNCHES, LOAD/UNLOAD
AMADA, MP1225NJ (1999), Automatic Load/Unloader, Ref# 9243,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
P9275 PUNCHES, TURRET
19 Ton TRUMPF, Trupunch 1000 (2006), Ref# 9451, (Jordan Craig
Machinery Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074)
See Page 3
20 Ton TRUMPF, TC2020R Rotation (2002), 19 Sta Rotation, 50"x
100", Ref# 9284, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
22 Ton TRUMPF, TC200R (2000), Bosch, Cartridges, Ref# 9329,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
22 Ton AMADA, Pega 255 (2003), Fanuc 18P, 31 Sta, 3a/i, Ref#
9525, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
22 Ton STRIPPIT, 1250H20 (2000), 2a/i, Fanuc control, thin style,
Ref# 9519, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
22 Ton AMADA, Vipros 255 (2000), Hyd, Fanuc 18P CNC control,
Brush table, Ref# 9523, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
22 Ton AMADA, Apelio III 2510VL (2001), Fanuc 160 IL, 2KW Laser,
Under Amp, Ref# 9458, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
22 Ton WIEDEMANN, Motorum 2044 (1998), 30 Stn, 2 A/I, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
22 Ton AMADA, Vipros 255 (2002), Fanuc 18P, 3 A/I, Large Assrt. of
tooling, (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
22 Ton AMADA, EM 2510NT (2007), 45 Sta, 4a/i, MP1225NJ, Ref#
9540, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
22 Ton STRIPPIT, 1250H20 (1999), 2 Auto index, Fanuc control,
Ref# 9498, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
25 Ton TRUMPF, TC5000R-1600 (2009), Sheetmaster, Ref# 9010,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
27.5 Ton TRUMPF, TC500R Bosch CNC (2000), Sheetmaster
Load/Unload, Ref# 9543, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
27.5 Ton TRUMPF, TC600L-1600 (2000), Siemans 840D, 2400 Watt
laser, LiftMaster, Ref# 9403, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton WIEDEMANN, Vectrum 3000 (1995), Fanuc 16P, 40 Sta,
2a/i, Ref# 9433, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton WIEDEMANN, Vectrum 3000 (1995), F1-1250 Loader Fanuc
16P, Ref# 9434, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton AMADA, Pega 357 (1990), Fanuc O4PC, 58 Sta, 2a/i, Ref#
9453, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
33 Ton AMADA, Pega 345Q (2000), Fanuc O4PC, 58 Sta, 2a/i, Ref#
9344, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
33 Ton AMADA, Pega 367 (1993), O4PC, 60"x 72", 45 Sta, 4a/i,
Ref# 9334, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
33 Ton STRIPPIT, Global 1215 (2003), Fanuc 180I, 50"X 60" thin
turret, 3a/i, Ref# 9520, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton NISSHINBO, HIQ1250PAL-510T (1998), 37 Station thick
turret, 3a/i, Ref# 9378, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton AMADA, Pega 357 (1994), Fanuc O4PC, 58 Sta, 2a/i, Ref#
9457, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
33 Ton STRIPPIT, Global 1225 (2002), Fanuc 18L, 50"x 100" Thick
Turret, Ref# 9414, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton AMADA, Vipros III 3510NT (2003), w/Amada Loader, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
33 Ton AMADA, OCTO 334 (1984), Fanuc 6M, 8 Sta, 1a/i, Thick
Style, Ref# 9118, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton AMADA, Vipros 367 Queen (1999), Fanuc 18P, 45 Sta, 4a/i,
Ref# 9550, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
33 Ton STRIPPIT, Global 1525 (2004), Fanuc 18i, 60"x 98", Thick
turret, Ref# 9503, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
CLUE,October,
October 2012
2012
Clue
P9275 PUNCHES, TURRET
Z9000 MISCELLANEOUS
Latest Installation by FERRIC Machinery
SPEED BEND 10ft x 150 Tons
9 Axis CNC Controlled
Corwhin Tool & Manufacturing,
in Guelph, ON
specialized in fabricating and repairs of telescopic machine covers
for machine centers, recently installed a new Ferric-ERMAK 9 axis
CNC Speed Bend press brake in their facility.
The new machine allows faster and more accurate bending of
their custom parts with a minimum of set up. The ER90 touch
2D-3D control with off line programming software generates the
machine programs with manual input as well as from flat dxf
drawings. The Y1-Y1 controlled beam together with the 6 axes
back gauge and CNC crowning they are virtually capable to bend
“any angle at any angle”
For more info on the Corwhin products contact: [email protected]
For FERRIC, QUALITY & SERVICE ARE NO COINCIDENCE
Contact FERRIC MACHINERY today for more information on FERRIC products.
FERRIC Machinery Inc.
3980 Chadburn Crescent, Mississauga, ON L5L 3X4
Toll Free 1-877-337-7424 • Fax: (905) 820-3234 • Email: [email protected]
www.ferricmachinery.com
33 Ton AMADA, Apelio III 357V (1998), Fanuc 16-L, 2KW, Approx.
61,000hrs, MP1225NJ, Ref# 9146, (Jordan Craig Machinery Int’l
Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton AMADA, Vipros III 3510 NT (2004), 58 Sta, 4a/i, Ref# 9152,
(Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
33 Ton AMADA, Vipros 358 King II (2001), Fanuc 18P CNC control,
Installed 2002, Ref# 9305, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton STRIPPIT, Global 1215 (2003), Fanuc 180I, 50"x 60" Thin
Turret, a/i, Ref# 9520, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
33 Ton AMADA, Vipros 358 King (1996), Fanuc O4PC, 4 a/i, Ref#
9554, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
33 Ton AMADA, Vipros 357 (1994), Fanuc O4PC, 58 Sta, 2 a/i, Ref#
9535, (Jordan Craig Machinery Int’l Inc Tel: 845-398-0073,
Fax: 845-398-0074) See Page 3
60" Throat STRIPPIT, 1500H/30 (2000), Fanuc 180iP, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
R4704 ROLLS, ANGLE BENDING
TAURING, DR/3H1, with many dies: + - 25 sets, (Machinerie Gilles
Lupien Tel: 819-478-5266, Fax: 819-478-5266)
R5604 ROLLS, INITIAL PINCH
12ga x 4’ KEETONA, , (Trader Machinery Inc Tel: 905-669-7507,
Fax: 905-669-7512) See Page 4
S0653 SAWS, BAND, HORIZONTAL
14" Dia BAXTER, 360 SA-HD (2008), Semi-Automatic, (Machinerie
Gilles Lupien Tel: 819-478-5266, Fax: 819-478-5266)
S0690 SAWS, BAND, VERTICAL
DoALL, T-1421, Tilting Frame, (Machinerie Gilles Lupien
Tel: 819-478-5266, Fax: 819-478-5266)
ER MAIER, KM1012, Roll-in-Saw, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
18"x 20" MARVEL, 81A, Tilt frame, Automatic, 1997/2001/2002,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
19"x 24" DoALL, TF-2025NC (2007), Tilt frame, Automatic, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
CLUE,
October 2012
Clue October,
2012
S4105 SHEARS, POWER SQUARING
BACKGAUGES
FOR BRAKES AND SHEARS
MICRO TREND ROBOTICS
¤
¤
¤
¤
¤
DEPTH CONTROL RETROFIT
CUSTOM AUTOMATION REPAIRS
ELECTRONICS & MECHANICAL
NEW DUAL MOTOR BACKGAUGES
1-3 YEAR WARRANTY, EST 1983
“GIVE US YOUR WISH LIST”
1914 PINEGROVE AVE, PICKERING, ON, L1V 1K8
TEL: 905-509-1218 FAX: 905-509-2687
TOLL FREE : 800-451-1144
www. microtrendrobotics ca
10ga x 48" TECHNOIMPEX, , (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
10ga x 4’ SAMPSON, , Hyd., (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
10ga x 10’ CINCINNATI, 1010, Mechanical, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
3/16"x 8’ CINCINNATI, (1998), Mech. Cut-To-Length line shear,
50-1/2" table height from floor, (Trader Machinery Inc
Tel: 905-669-7507, Fax: 905-669-7512) See Page 4
1/4"x 10’ “NEW” FERRIC, 3100 x 6, CNC Backgauge, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
1/4"x 13.5’ “NEW” FERRIC, 4100 x 6, w/Sheet support system, auto
Back gauge, (Ferric Machinery Inc Tel: 877-337-7424,
Fax: 905-820-3234) See Page 1
3/8"x 10’ PEARSON, , Mot Backgauge, Extra blades, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
3/8"x 14’ ALLSTEEL, , Mot Backgauge, under power in Quebec city,
(Boulanger Machinerie Inc Tel: 418-428-4709, Fax: 418-428-4710)
1/2" x 10’ “NEW” FERRIC, 3100 x 13, CNC Backgauge, (Ferric
Machinery Inc Tel: 877-337-7424, Fax: 905-820-3234)
See Page 1
T0140 TABLES, ROTARY
12-1/4" KITIGAWA, TS320R, w/Tailstock, 3-7/8"Bore, (Trader
Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
W0760 WATER JET CUTTERS
30hp MAXIEM(OMAX), 1530 (2011), Chiller, 600lb Hopper, Int.
Diamond Nozzle, Ref# 9541, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
63"x 118" MITSUBISHI, Suprema DX510, 2500 hrs, Installed New
2009, Ref# 9507, (Jordan Craig Machinery Int’l Inc
Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
8’x 14’ FLOW, (2005), Integrated Flying Bridge Dynamic Waterjet,
Hyplex Pump@92000psi, Ref# 9506, (Jordan Craig Machinery
Int’l Inc Tel: 845-398-0073, Fax: 845-398-0074) See Page 3
48"x 48" FLOW, (1999), (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
48"x 96" FLOW, (1998), 25hp, (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
72"X 144" FLOW, (2006), 100hp, 87000psi, (Stock Machine Tools
Co Tel: 514-326-7006, Fax: 514-329-2599)
72"X 144" OMAX, (2008), 40hp, (Stock Machine Tools Co
Tel: 514-326-7006, Fax: 514-329-2599)
W0990 WELDERS
LINCOLN, Sub Arc Wire, 18’ Seam Capacity Seam Welder,
Location: Toronto, Ref# 3564, $9,500, (Turners Machinery Inc.
Tel: 805-525-2171, Fax: 805-525-5683)
Z9000 MISCELLANEOUS
16" STARRETT, HB400, Quadra-Chek 2000 control, w/Workbench,
(Trader Machinery Inc Tel: 905-669-7507, Fax: 905-669-7512)
See Page 4
Transformers 5 KVA to 1000 KVA, Large Assortment of used, (Park
Thermal International Tel: 905-877-5254, Fax: 905-877-6205)
Pallet Trucks, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Assorted Fans, (Park Thermal International Tel: 905-877-5254,
Fax: 905-877-6205)
Lab Equipment , ASSOCIATED ENVIRONMENTAL CHAMBER,
SK-3105, (Brighton Machinery Sales Inc Tel: 519-485-7089,
Fax: 519-485-7368)
ORION, , Packaging and Wrapping Machine, (Machinerie Gilles
Lupien Tel: 819-478-5266, Fax: 819-478-5266)
PAGE
Page 21
21
131 Citation Dr, Units 17 & 18
VAUGHAN-CONCORD
ONTARIO, L4K 2R3
Tel: (905) 738-8730
Fax: (905) 738-5148
e-mail: [email protected]
website:www.sabito.com
MACHINERY INC.
INDUSTRIAL MACHINE TOOLS & APPRAISALS
WE BUY & SELL SINGLE MACHINES OR COMPLETE PLANTS
BENDERS
2"
KEYSTONE, Horizontal Tube Bender
BORING MILLS, HORZ, TABLE
3.14"
4"
5.11"
UNION, BFT 80/2
TOS (1995), 4-Axis DRO
TOS, WHN 130 (2003)
BORING MILLS, VERT
36"
70"
84"
88"dia
10’ dia
BULLARD, VTL
SUMMIT, 60 CNC VTL
KING Double Ran VTL & DRO
STANKO, 1525, 100"sw, 70"v, 1.6-80rpm, 2 hd
NILES, F120, 128"sw, 24"stk, 6’rail hd trav, 50hp
BRAKES, PRESS
LATHES, ENGINE
PRESSES, STRAIGHT SIDE
18"x 84"
TOS, SUI40, 3" Bore
250 Ton
BLISS, 12"stk, 38"SH, 6"adj, 30spm, 440v
18"X 64"
SIRCO, PA 19-4, 4-1/4" Bore
250 Ton
SMERAL, SSDC
GEMICO, 1760
300 Ton
DANLY, SSDC, 24"stk, 39.5"SH, 20spm
TEZSAN, JN 71B
300 Ton
ROUSELLE, 102x48, 14"stk, 31"SH, 8"adj, 35spm
Turret, HITACHI SEIKI, 7D, 6-1/4"hole
300 Ton
USI CLEARING, 16"stk, 52"SH, 20"adj, 20spm, 40hp
LATHES, N/C & CNC
HAAS, SL20-T, CNC (2001)
HARRISON, Alpha 400, 49"BC, 16"sw, 2"Bre, 2500rpm, Fanuc CNC
PUNCHES, TURRET
WASINO, LJ-63M (1988)
33 Ton
AMADA, Apelio 357 (1992), 45stn, 4-Auto, Fanuc 04PC
OKUMA, 14.1" x 23.6" LT25 (1999), 4-Axis
33 Ton
AMADA, Vipros 357, CNC, 58 stn, 2 Auto, Fanuc
VDF, DN 820, 32"x 72", CNC
MITSUBISHI, MH-50C (1989), 158 ATC
75T x 8'
HACO PPM 2575
75T x 10’
DIACRO, 75-10, Hydro-Mech, 3"stk, 8"adj, 12"SH, 8"thrt
MACHINING CTRS, HORZ
MACHINING CTRS, VERT
EUMACH, DVM-5030, Double Column CNC Center, X-20.4" Y-12.2"
Z-27", ATC-180
90T x 10’ PACIFIC, J90-1, Hyd, 7"stk, 6"thrt, 6"SH, 2-Axis CNC, 15hp
LEADWELL, MCV 760 XL
110T x 10' AMADA, FBD 1030, 8-axis CNC
HERMLE, C800U (2001), 5-axis
120T x 12' ALLSTEEL 120-12
CINCI, Series 5, 102"BH, 3"stk, 5"adj, 12"SH, 8"thrt, 30spm CHIRON, FZ08K Magnum (2007), 5-axis
DOOSAN, REVO 4020 (2006), CNC
ALLSTEEL, MBB-160-3200, (2005), Hyd, CNC
CINCINATTI, 175CB-12FT, Hyd, 2-Axis
MACHINING CTRS,
CINCINATTI, 175CB-12FT, Hyd, Comp-u-bend 610BG
HURCO C-40-U, 5 AXIS CNC (2004)
AMADA, FBD2004FS, Fine Bender, NC9-FS CNC, (1997)
WIRE EDM MACHINE
BROTHER, HS-70AM (2006)
AGIE CHARMILLES, Roboform 50 (1998), Ram Style
GRINDERS, CYLINDRICAL
20" x 40"
20"x 80"
TOS, BU 28/100, Universal
TOS, 50U (2000), Universal
GRINDERS, ROTARY
48"
SHIBAURA, KRT-8D
86" X 21"
BROWN & SHARP, Hydraulic
JAKOBSEN, Hydraulic
TOS, BHR 40B (1989), Hydraulic
IRONWORKERS
120 Ton
PIRANHA, P120
ROLLS, PLATE BENDING
16ga x 4’
TENNSMITH, SR48P, 3"roll, Slip, 3/4hp
12ga x 4’
NIAGARA, L351P, IP, 4 Roll, Manual Adj & Drop,
10ga x 5’
WDM (2008), Initial Pinch
SAWS, BAND, HORIZONTAL
DO-ALL, C-916A
10" x 15"
RAM, Roll-in
36" x 13
DOALL, 50-5200 ipm, Welder, Grinder
SHEARS, POWER SQUARING
MECHANICY, FWA 41M
KIHEUNG, KMB-U6, DRO
1/8"x 36"
Mechanical
1/4" x 10’
HACO, TS 3006 (2000), Hydraulic
1/4" x 10’
VIMERCATI, SI 3006 (2004), Hydraulic
1/4" x 10’
CINCINNATI, Hyd, 36" FOPBG, v/Rake, Sq Arm, 15hp
KAO-FONG, KF-G-450
1/4" x 10’
CINCINNATI, 2CC10, Mech, 36"FOPBG, 60spm
HURON, NU3
1/4" x 10'
PEARSON, Hyd, FOPBG
MILLS, TURRET
9"x 42"
KONDIA, Vertical
9"x 42"
DARBERT, Vertical
MILLS, VERTICAL
20" x 94"
25hp
CINCINNATI, #5, X-50" Y-18" Z-16", #50, 14-1400rpm,
24" x 98"
TOS, FC63V, X-63" Y-23.62" Z-23.62", 3-Axis Heid DRO
PRESSES, GAP FRAME
GRINDERS, SURFACE, RECIPROC
6" x 18"
8"x 24"
16"x 59"
UNIV
HECKERT, FSS 440, V1/2
15.74"x 78.74"
2"x 2"x 3/16"TAURING, Alpha 40, CNC
SAWS, BAND, VERTICAL
MILLS, UNIVERSAL
14"x 44"
AMADA, Virpos 2510 (2000), CNC
ROLLS, ANGLE BENDING
NIAGARA, HD-70-8-10, 102"bh, 15"SH, 7"stk, 24"BG
3’
Radial arm drill
6’
STANKO, 2M55, w/ Box Table
1-1/2"x 48" TECHNIDRIL, Series 200 Gundrill
BLISS, 12’stk, 40"SH, 25spm, 75hp
22.5 Ton
70T x 10’
DRILLS, RADIAL
500 Ton
TAKISAWA, TS-20, CNC
VDF, V800, 42"x 72", CNC
160T x 10'
175T x 14'
175T x 14'
225T x 14’
VERSON, 12"stk, 30"SH, 10"adj, 20spm, 60hp
BLISS, 16"stk, 12"adj, 38-1/2SH, 30spm, 15"bolster
GOODWAY GT-25, CNC (1999)
35T x 8’
DIACRO, 16-96, CNC BG, 9"SH, 3"adj, 9"thrt, 3hp, 220v
60T x 6'
WYSONG THS60-72, Hydraulic, Automec 300, CNC, Light
Guards
135T x 8’
300 Ton
350 Ton
45 Ton
BLISS, C-45, HS, 29" x 19"bed, 2-1/2"stk
1/4" x 12’
NIAGARA, Hyd, 36" FOPBG, 50"sq arm, 20spm, 15hp
3/8" x 10’
CINCINNATI, 24"ROMBG, 50spm, Sq Arm, 20hp
3/8" x 10’
CINCINNATI, 1510, 42" FOPBG
3/8" x 12’
CINCINNATI, 4312, Mech, 40" FOPBG, 18"throat, 50spm, 15hp
1/2" x 12’
CINCINNATI, 48"digital FOPBG, 18"gap, 40spm, 20hp
1/2" x 12’
CINCINNATI, 4H12, 12’sq arm, 2 front suppts, 25hp
5/8" x 8’
CINCINNATI, Mech, 48"FOMBG, 8’sq arm, 40spm
5/8"x 8’
CINCINNATI, Mech, ROMBG
5/8" x 10’
CINCINNATI, Hyd, 36"FOPBG, 18"gap, 14spm
5/8" x 12’
CINCINNATI, Hyd, 48"FOPBG, DRO, 18"gap, Power Rake
MISCELLANEOUS
PRESSES, OBI
Press H&A 60 Ton DAKE
75 Ton
MINSTER, No.7, c/w AC
250 Ton
NIAGARA, 8"stk, 22-1/2"SH, 35"x58", 35spm, A/C
Comparitor 30" Optical, JONES & LAMPSON, DRO
320 Ton
MORI (2001), Fine Blanking Press
Phase Converter
APPRAISAL SERVICES
-
RONK, X6
AMEA & USPAP CERTIFIED
CNC MACHINE TOOLS * PRESS BRAKES * SHEARS * TURRET PUNCHES * BENDING ROLLS * IRONWORKERS * NOTCHERS * BENDERS
Page 822
Page
Clue
October,
2012
CLUE,
June 2012
The Right Equipment For All Your Fabrication Needs
Your #1 Source for Pipe and
Vessel Handling Equipment
Whether you are installing pipe into racks in refineries, turning
pipe spools, rolling/fabricating vessels and tanks, or pulling long
pipleline drag sections, Sabito Machinery is your one-stop shop
for all sizes of pipe and vessel handling equipment.
MACHINERY INC.
INDUSTRIAL MACHINE TOOLS & APPRAISALS
131 CITATION DR. UNITS 17 & 18, CONCORD, ON, L4K 2R3
(905) 738-8730
WWW.SABITO.COM
New & Used Equipment, Machinery Sales | Toll-Free: 1-800-717-1440
MODERN TOOL BC LTD.
1385 Kingsway Avenue, Port Coquitlam, BC V3C 1S2 | (604) 472-1444 | Toll Free: 1-800-717-1440
SCOTCHMAN Model # 50514-CM
(50 ton) Hydraulic Ironworker
DURMA Model # AD-R37175 CNC
Hydraulic Press Brake
Fabrication, Press Brakes
MASTEEL MBHSA-12130 Press Brake
Fabrication, Welding Machines
SIP WELDMATE I25-25KVA Spotwelder
Sheet Metal, Misc.
MARATHON 4 in 1 Band Iron Tool
Sheet Metal, Brakes
TENNSMITH HB97-18 Brake
Lathe, Manual Lathe
MODERN/CHAMPION 1550 Lathe
Fabrication, Welding Machines
MILLERMATIC (130kp)
Fabrication, Saw
MODERN/WAYTRAIN UB-916A-CSA Band Saw
Milling Machines, Milling Machines
MODERN 935VS-1 Milling Machine
Sheet Metal, Roll Former
LOCKFORMER (#20) Super Speed Pittsburg
CONNECTICUT Model # 816
Straight Brake
Need your equipment serviced? Our service department is available from Monday to Friday 9am to 5pm
Modern Tool BC is Western Canada’s leader in Machinery sales.
We have more than 200 machines in stock, and hundreds more options of New & Used Equipment
Whether you are looking for Press Brakes, Shears, Benders, Ironworkers, Grinders, Plasma Tables or Saws we have it all.
Visit our new Web Site @ www.moderntoolbc.com
Follow us on Twitter @ModernToolBC
Clue October, 2012
Page 23
COMPRESSORS
GRINDERS
DEVILBISS 3hp
BALDOR 1.5hp Bench grinder
DEVILBISS 5hp
BALDOR 3hp Pedestal grinder
ROPER WHITNEY 14ga x 4’
CANADIAN (#15) Single phase
TOS drill press
ALLEN drill press
LATHES
KING 4"x 6"
LINCOLN SquareWave Tig 175Pro
JAESPA (W260) 11" x 18"
ESAB (Smashweld 180mit)
VERTICAL SAWS
CANOX (C-SW300) Tig/Mig
MARVEL 10"x 14" Tilting, Programmable
FORCE 14"x 40"
DELTA ROCKWELL 10" table saw
TOS (SV18RA) 15"x 60"
MIDSAW (Minor) 15"
Assorted Transformers
VBS (JET 500) 20"
Hydraulic Pump, ENERPAC
ROCKWELL 24" scroll saw
Metal Disintegrator, ElectroArc
DoALL 36"
Rotary Tables
MILLS
BUFFALO (#18)
ABENE Universal
ARBOGA (GM3512) Gearhead Drill
CORREA (F2UE) Universal
ARBOGA (G1304) Bench top drill
HASCO (CK-1) 9"x 42"
HERBERT 15"
FORWARD 9"x 42"
DRILLS, RADIAL
MISCELLANEOUS
Mag. Lathe Chuck, ECLIPSE
SHEARS
TENNSMITH 16ga x 36" manual shear
Assorted Demagnetisers
LODGE & SHIPLEY 3/8"x 8’ mechanical gap
Granite Surface Plates
PRESSES
Narex boring/facing head
shear
KAOMING 3’ arm
B&B Punch Press
MAS (VR4A) 4’
ARCAN 40T H Press
Z9000 5000
MISCELLANEOUS
TOYOTA
lb Propane
ProArc (400) by Marquette welder
HARDINGE (TFB-H) 11"x 18" toolroom lathe
ARBOGA (SE725) Gearhead Drill
LIFT TRUCKS
AIRE LIQUIDE (M130 mig)
HORIZONTAL SAWS
HARDINGE (DV59/DSM-59)
DRILLS
A&H Electronics spot welder
HAMMOND (VH600DB) belt sander
CHEVALIER (FSG 818AD) Surface grinder
BRAKES
LINCOLN (CB-250 Idealarc) electric welder
SANDERS
PEARSON 3/8"x 10’ hyd shear
Pin gauges
PEXTO 6x6 Notcher
WELDERS
KR WILSON 50T H Press
HOBART (Tig TR250HF)
Assorted Measuring Tools
100T H Press
LINCOLN Powerwave Arclink 455M
Collet sets
KOMATSU 5000 lb Propane
ROLLS
Assorted Pallet Trucks
B&B 36" x 18ga
HYSTER 15000 lb
PEXTO 4’ x 16ga Power rolls
Z9000 MISCELLANEOUS
LINCOLN (Idealarc CV-300)
Assorted vises
ESAB Plasma cutter
DIVERSI-TECH Downdraft Table Ventilator
ARC (PAK 5Xr) Plasma cutter
MUST THERMAL
SELL
Chain Hoists
Phone: 905-634-8442
Fax:
Cincinnati 10ga
x 10'905-681-6940
4280 Harvester Road, Unit 5 & 6, Burlington, Ontario, L7L 5Z5
Power Squaring Shear
www.paulmachinery.com
Bliss #21
Punch Press
Contact: TCL Asset Group Inc.
MACHINERY ADVERTISER
PUBLISHER
David Stapleford
Ph: 416-736-1367 x228
BORINGwww.managingyourassets.com
MILLS, HORZ, TABLE
Website:
KURAKI, KBT1101P, 4.3" X-84" Y-72", DRO
MACHINING CTRS, VERT
CHUCKS
MATSMOTO, HA-6-8-46, 8" Power chuck
DRILL, RADIAL
SEIWA, MG-915, 36"
PRINTED BY:
Ricter Web Printing
DELIVERY
Clue is delivered monthly and is sent by
third class mail on or before the business
day following the seventh of each month
DEADLINE
The deadline for advertising is the day
following the last Wednesday of the month
ADDRESS
343 Smith Ave
Burlington, ON, L7R 2T9
Phone: 905-528-7765
Fax: 905-917-0222
www.cluemachines.com
e-mail: [email protected]
MITSUBISHI, MTC-10B 10" Chuck, CNC
BRIDGEPORT-ROMI, EZ Path, 19"x 40" CNC
MATSUURA, RA-1F, 20"x 15" w/Pallet Shuttle
KITAMURA, MyCenter 4, 20"x 40"
V-TECH, 4, 20"x 40"
MILLS, TURRET
DUST COLLECTORS
DONALDSON, 19CYC 2hp
NORTHCOTT-MORRIS, JN1-300DC
EXCELLO, 602, 9"x 36"
FIRST, LC 1-1/2, 9"x 42" w/DRO
HOLKE, F-11-V, 9"x 49" with DRO
ADVERTISERS DIRECTORY
FORK LIFT TRUCK
HYSTER, 10,000lbs
135" vertical, side shift
COMPANY
GEAR HOBBERS
MIKRON, 79 small, 2 available
Alberta
PRESS,PHONE
KICK
ROPER, 50, 5 Ton
PAGE
THREADER
OSTER, 554US 2" bolt & pipe threader
BARBER COLMAN, 14-15
B F G Machine Tools Inc., Edmonton (Brian) ...................................780-434-7795
........780-436-0717 .......15
VIBRATORY FINISHER
GRINDER, CYLINDRICAL
British
Columbia
MISAL, RML-500,
11"x 20"
VIBRA-FINISH, bowl, 72" diameter
ECCOGRINDERS,
Machinery, SURFACE,
Surrey (Rick)RECIPROC
......................................................778-298-2023
MISCELLANEOUS ........778-298-2024 .......17
EXTRACT-ALL, S-987-2A Compact
Air Cleaning System
BROWNTool
& SHARPE,
6"x Port
12" Coquitlam (Pam) ..................................604-472-1444
Modern
(BC) Ltd,
........604-472-1455
.......16
MORI SEIKI, SL-1A, Chip Conveyor
KNOLL, 285-1, Chip Conveyor
PERFECT, PFG-2040M, 7"x 16" Manual
Brighton
Machinery
Sales12"x
Inc,24"
Ingersoll
(Brian)...............................519-485-7089
........519-485-7368 .......15
Tilting box table, 30"x 24"x 22"
CHEVALIER,
FSG-3A1224,
Hydraulic
HARIG BALLWAY, 6"x 18"
Ontario
Cameron
Steel,
Lindsay (Bob) ........................................................705-878-0544 ........705-878-0560 .......21
LATHE,
ENGINE
ACRA, CS20 GC, Canada,
20"x 80" with
DRO (Peter).........................................416-291-9499 ........416-291-4990 .......22
Compumachine
Toronto
LATHES,
N/CInc,
& CNC
Corporate
Assets
Toronto (Daphne) .........................................416-962-9600 ........416-962-9601 .......27
NAKAMURA,
spindle
Dipaolo
CNC TNC-15
Retrofitwith
Ltd.,subMississauga
(Nelson) ............................905-676-9265 ......................................10
NAKAMURA, S-JR
Fabtec
Machine
Tool
Solutions
Inc, Oakville (Raj)............................905-469-1586........905-469-3054 .......18
MORI-SEIKI, SL-3H
Ferric
Machinery
Inc, 4-axis,
Mississauga
OKUMA,
LU-15 (1995)
CNC (Koen) ......................................877-337-7424 ........905-820-3234 .........3
Haco Canada, Mississauga (Francis)..............................................905-828-1087 ........905-828-2062 .......26
CERTIFIED EQUIPMENT APPRAISALS * Toronto, Ontario
Havlik Int’l Machinery, Cambridge (John) ........................................519-624-6240 ........519-624-4119 .......13
Phone:
(905) (Hayden)
793-8080
Fax: (905) 793-2190 Email: [email protected]
Hayden
Lee, Markham
....................................................905-201-7841
........905-201-7842 .......14
Hove Machine Services, Wasaga Beach (David) .............................705-429-5910 ........705-429-1557 .......15
Infinity Assets Solutions, Concord (Leslie)......................................905-669-8893 ........905-669-7512 .........2
Clue October,
2012
L S Walker Machine Tools Inc, Milton (Chris) ..................................905-876-0890 ........905-876-1959
.......12
Machine Solutions Inc., Guelph (Andrew) .......................................416-276-0596 ......................................25
WWW.SKBRALY.COM
Page 24
FAX
“CNC Vertical Lathe is in Stock, Made in Taiwan, Delivery in 15 days!”
“USD$268,000.00”
CNC VERTICAL LATHE SERIES
Stock Machine Accessories
» Table Diameter : 1250mm
» Max. Swing : 1600mm
» Max. Turning Diameter : 1500mm
» Max. Turning Height : 1250mm
» Max. Mass of Workpiece : 9000kg
» Horizonal Travel (X-Axis) : -200~1700mm
» Vertical Travel (Z-Axis) : 900mm
» Crossrail Stroke : 800mm (with 5 step)
» Rapid Traverse (X-Axis/Z-Axis) : 12m/min ,
10m/min
» Fanuc System 0i-TD CNC Controller with
10.4" color TFT LCD
» Table Speed : 2~350 rpm (with 2 step)
» Spindle Motor : AC 30/37 kw
» Live Spindle Motor : AC 7.5/11 kw
» The series Vertical Turning Lathe
offers power, strength and speed to
accomplish today’s toughest
machining applications. The
maximum turning diameter is up to
2,500mm loading weight is up to
21,000KG. The optional live tooling
with full C axis function offers more
flexible machining capabilities to
make more complex work piece in
one machine.
» ATC Tools x 18 sets
» Chip Conveyor & Coolant Tank
» Oil/Water Separator
» High Pressure Pump (3 Bar)
» Table Lubricant Oil Cooling Unit
» Machine Cover (Semi-Opened)
» Auto Lubrication System
» Heat Exchanger For Electrical Cabinet
» Table Manual 4-Jaw Chuck
» Hydraulic Unit
» Work Light
» Signal Tower Light
» Tool Holder BT-50 (O.D.+I.D.) x 1 pcs
» Anchor Blot & Tools and Tool Box
» Operation Manual & Spare Part List
OPTIONAL ACCESSORIES AVAILABLE
7240 Woodbine Ave. Unit#204, Markham, ON L3R 1A4
Tel: 416 786 7762
E-mail: [email protected]
W W W. N I M E S C H M A C H I N E RY. C O M
LET US WORK FOR YOU
Trans-Canada Liquidations (TCL) has been in business since
1958 and offers the following services:
Surplus to the Ongoing Needs of General Mfg.
Manufacturer of Woodworking Machinery
Wednesday, October 2410.30 A.M.
835 Cherrier,
Drummondville (Qc)
J2B-5A8
AUCTION SALES: We conduct auction sales right across Canada and
have facilities in the USA. We will purchase any type of manufacturing
company for cash or sell on a commission basis.
APPRAISALS: We have certified appraisers on staff who can appraise all
types of machinery and equipment; woodworking, printing, chemicals,
fabricating, tool & die, construction, aircraft, foundries, etc...(in the strictest
confidence).
LIQUIDATIONS: We are able to conduct all types of Liquidation Sales,
and can show you where more money can be realized. Complete liquidation
is assured; our efficient organization enables us to handle numerous sales a
week.
MERGERS & ACQUISITIONS: There is a separate department for
Mergers and Acquisitions, and we have been very successful in buying and
selling both ongoing and bankrupt companies for clients. We represent
various groups interested in purchasing manufacturing businesses.
Our clients are Federal and Provincial Governments, Financial Institutions,
Chartered Accountants, Trustees in Bankruptcies and Private Corporations.
No proposition is too large to arouse our interest. The next time you have a
plant with an uncertain future... get in touch with TCL for fast action.
TCL Asset Group Inc.
4610 Dufferin Street, Suite 209
Toronto, Ontario, Canada M3H 5S4
www.ManagingYourAssets.com
Telephone: (416) 736-1367
Fax: (416) 736-4159
Email: [email protected]
WE APPRAISE • WE LIQUIDATE • WE AUCTION
Clue October, 2012
• Matsuura Horizontal Machining Center,
H-Plus 630,installed new 2003, only 8965
hrs (cutting time)
• Fanuc 16 IBM, with full 4 axis B-360
degres INCR 0.001, Travels: 41X36X34",
Dual Pallets, 12,000 RPM. 60 atc, cat 50.
Other featured machines:
• Mazak VMC VTC-30 C, Mazatrol-Plus,
(XYZ) 65X30X26"
Matsuura HMC
• Matsuura VMC,MC-760V, Fanuc 11 MA,
Tsudakoma manual pallet changer, XYZ: 30X16X19"
• Nakamura-Tome Superturn 3, CNC lathe, Fanuc 10 T,
• Colchester Strom A90, Fanuc 21 I-T, With Bar Feed MBF 1000 Tornado.
• Robot Welder fanuc 120-I
• Thomson Surface Grinder 24X96"
• Churchil Cyl. Grinder 10X60"
• Centerless Grinder Cincinati with Bar Feed,
• Rotary Grinder Blanchard 36" Dia. and 42"
• Lathe Colchester Mastif 1400, 21X120"
lathe harrisson 15X72"
• Lathe Yunnan 17X60"
• Others: Spray Booth, balancing Machine, Broaching, Spot Welder 50 KVA,
Welders, Compressors Sullair 12-50, and LS 120-50H, Fork Lift, Much More
AUCTIO
N
NOTICE
www.encanteurasstalbot.ca
450-347-2233
Page 25
• High rigidity and stability
• Functional design for easy maintenance
• Short delivery time from manufacturer
• Siemens or Fanuc control systems
• Can be equipped with table positioning and rotary tool
drive
• Automatic exchange of turning tools and rotary tools
• Ram designed for efficient and precise machining
• Variable height of the working area
• Possibility to perform high-pressure through tool coolant
• Table size ranging from 2500 to 6000 mm
• Machines large and heavy workpieces
• High efficient machining
• Rigid table bearing using hydro-static guiding principles
• Precise table positioning (C-axis) and rotary tool drive
with high power output
• Siemens or Fanuc Control systems
• Can be equipped to use high-pressure coolant
Page 26
Clue October, 2012
$360,000 USD
GTC 20090A CNC Vertical Lathe
• 80 x 63 table diameter
• 2000 mm. swing; 1600 mm. workpiece height
• 8000 kg. max. workpiece weight;
• 8T FANUC 18i CNC control
$450,000 USD
GTC 250110 CNC Vertical Lathe
• 100 x 80 table diameter
• 2500 mm. swing; 2000 mm. workpiece height
• 10000 kg. max. workpiece weight 10T
• 12-position Tool Changer
• FANUC 18i CNC control
$36,000 USD
VMC 0641 FANUC
• RS232 - PCMCIA Slot
• 8000 RPM spindle
• CAT 40
• 16 pos. Bi-directional
$42,000 USD
VMC 0700B
• 800 x 420 mm. worktable
• 3 x 18 mm
• FANUC
$46,000 USD
CAK 63285 D CNC Lathe 25 x 112 Fanuc/Fagor
• 630 mm. swing over bed
• 410 mm. max. cutting dia.
• 2850 max cutting length
• 104 mm. spindle Bore
• horizontal-axis 8 position turret
Canada Inc.
Clue October, 2012
2783 Portland Drive, Oakville, ON L6H 6M6
Tel: 905-829-1579 Fax: 905-829-8692
Email: [email protected]
Website: www.smtcl.ca
Page 27
M A C H I N E R Y
899 Danforth Place
Burlington, ON L7T 1S1
Phone: 905-528-7765
Fax: 905-917-0222
TOS Trade Canada Inc.
a TOS Varnsdorf company
415 Industrial Dr.
Milton, ON L9T 5A6
http://www.tostrade.com
Tel: (905) 878 0888
Fax: (905) 878 9022
[email protected]
New WHQ-13 CNC
Structured to guarantee
high rigidity, reliability
and accuracy.
Ready for delivery
New and improved
WHN-13 CNC
Wide range of
technological
functions
featuring
a compact design
Visit our website for more details:
www.tostrade.com
Proud Member
Page 28
Call the only local TOS
-
905-878-0888
Clue October, 2012