and Microwave Technologies

Enclosures for Electronics,
RF- and Microwave Technologies
www.mts-systemtechnik.de
2
About us
Systemtechnik
RF-systems and -units
Data technology
Mechanical products
History
Main products
Competence
쮿 1980 MTS Mikrotechnik has been
founded as a
development and
manufacturing
company
쮿 Signal distributionsystems for audio,
video, RF and
microwave, used for
telecommunication,
radio monitoring,
satellite communication
쮿 Own design and
production of RFcomp. and -systems
Certified with DIN ISO 9001: 2000
Gewerbepark Ost 8
D-86690 Mertingen
Germany
Phone +49(0) 9078 / 91294-0
Fax +49(0) 9078 / 91294-70
[email protected]
www.mts-systemtechnik.de
쮿 1995 Changing from
MTS Mikrotechnik in
MTS Systemtechnik to
follow the changed
demands on the
market
쮿 Development and production of active and
passive components for
rf- technology
쮿 Manufacturing of
mech. components for
aviation, for aerospace
industry, RF-techn. as
well as for optical
industry
쮿 RF-development and simulation laboratory
쮿 Big CNC-production
center
쮿 Soft- and hardware
laboraty
쮿 CAD construction
service
쮿 Modern productionmethods like CAM
Today notable companies of the electronic industry all over europe
belong to our customers:
Copyright
Technical subject to change.
Illustrations similar.
ALCATEL, Arpege Défense, AUDI, Bosch Telecom, CERN, Danet, DB Telematik, DESY, DLR,
EADS, Ericsson, ESA, Eurocopter, Infineon, Leica, Lucent Technologie, ND SatCom, PTB,
Rohde & Schwarz, Serco, SIEMENS, Thomson, T-Mobile, Vodafone
Table of contents
AG/AGO Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
UC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TC Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ZG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
RG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
EH Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
G Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PGS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
KG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
FK Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
EG Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
GRS/GRA Handles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
EGD Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
EB Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Front/Rear and Dummy Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
F and TF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Milling Center / Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Overview devices and systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Overview components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4
Milling Enclosures – RF-Enclosures
AG/AGO series
The RF-enclosures of AG and AGO series
are precision enclosures milled out of a
full aluminum block. Their characteristic is
a circuit board mounted with clamping
screws, so drillings are not necessary in
the circuit board. These enclosures are
locked with multiple bolted, 2 mm strong
covers, which are alternatively flush lokked or have a mounting flange exceeding
10 mm on each side.
Dimensions
The enclosures of AG/AGO series are
available in four different sizes, height
and width remain always the same and
only the length will change (please note
the drawing on page 6).
Content of delivery
The enclosures are delivered according to
the defined order version, including all
necessary accessories. (enclosures with
cover/bottom, screws for the cover-/bottom-and circuit board mounting as well as
accessories manufactured.)
Service
We do modificate enclosures, according
to customer specifications, e.g. drill-hole
pattern and modified dimensions.
Application domain
Amplifiers (modules), oscillators,
attenuator, etc.
Versions
Type 1
With standard mounting hole-pattern (in
opposite of the UC-series only for one
feed through filter DF2)
Type 2
without mounting hole
Type 3
With standard drill hole-pattern, RF-connectors, optional with fastening as well as
one ground connector and one feed
through filter DF2
Milled enclosures – RF-enclosures
Structure and difference
5
Dimensions of covers and bottom plates (in mm)
AG series
The circuit board is only accessible from
one side after mounting.
M3 mounting holes for
flange mount jacks
Dimensions of cover plates and bottom plates in mm
Enclosures
Circuit board
clamp
bottom
plate
circuit
board
M2,5
AGO(pen) series
The circuit board is accessible from both
sides after mounting.
bottom plate
type
L x
B
AG 1
B1
62
51
2
AG 2
B2
94
51
AG 3
B3
125,5
51
AG 4
B4
157
AGO 1
B1
AGO 2
AGO 3
AGO 4
x
H
l
b
cover
type
52
40
C1*
2
84
40
2
115,5
40
51
2
147
62
51
2
B2
94
51
B3
125,5
51
B4
157
51
L
x
B
x
H
41,8
51
2
C2*
74,0
51
2
C3*
105,5
51
2
40
C4*
137,0
51
2
52
40
C1
41,8
51
2
2
84
40
C2
74,0
51
2
2
115,5
40
C3
105,5
51
2
2
147
40
C4
137,0
51
2
Configuration of model designation
AGO 2 - 1 - CB - 5 4 - C N
surface protection
R = raw
N = chemically nickel-plated 8 – 10µ
Surface pretreatment
T = vibratory finishing
(see technical information)
M3 mounting holes for
flange mount jacks
Cover plate
M2,5
C = matt finish
RF-ports, female
0 = BNC
4 = SMA
2 = TNC
8=N
Impedance
5 = 50 Ω (7 = 75 Ω on request)
Cover/bottom combination (designate only with one letter)
C = cover (flush)
bottom (with overstanding flange and mounting holes)
Design
Size
Circuit
board clamp
bottom
plate
circuit
board
M2,5
Type of enclosure
6
Milled enclosures -Dimensions
Dimensions, AG/AGO series
AG/AGO1
AG/AGO2
AG/AGO3
AG/AGO4
All dimensions in mm
Milled enclosures – RF-enclosures
7
UC-series
The RF-enclosures of UC series are precision enclosures milled out of a full aluminum block. The circuit board is screwed
onto a circulating assembly web, so drill
holes on the circuit board are not necessary. The enclosures are locked with multiple bolted, 2 mm strong covers, which can
be choosed as flush locked or as a mounting flange exceeding 10 mm on each
side.
The enclosures of UC-series are available
in four different sizes, whereby height
and width remain always the same, only
the length will change (please note the
following drawings).
Configuration of model designation
UC2 - 1- CB - 5 4 - C N
surface protection
R = raw
A = yellow alodyned
N = chemical nickelplated
surface pretreatment
T = vibratory finishing
C = matt finish
(see technical information)
RF- Ports
0 = BNC
2 = TNC
4 = SMA
8= N
Versions
Impedance
5 = 50 Ω
(7 on request)
Cover/bottom combination ( designate only
with one letter)
C = cover (flush)
B = bottom (with over
standing flange
and mounting
holes)
Design
Type and size
Version 1
With standard drill hole-pattern (in opposite of
the AG/AGO-series for 2 feed through filters DF2).
Version 2
Without mounting holes
Content of delivery
According to the defined order versions, the
enclosures are delivered with all necessary
accessories (enclosures with cover/bottom, screws
for the cover-/bottom-and circuit board mounting,
as well as accessories according to the design.)
Service
We do modificate enclosures, according to
customer specifications, e.g. drill-hole pattern and
modified dimensions.
Version 3
With standard drill hole-pattern, 2 RF-connectors,
optional with fastening as well as a ground connector and one feed through filter DF2
Application note
For example amplifiers (modules), oscillator,
attenuators etc.
8
Dimensions, UC series
All dimensions in mm
Standard design
Model
UC1
La
Li
Ba
Bi
H
41,8
31,8
48
38
33
UC2
73,5
63,5
48
38
33
UC4
137,0
127,0
48
38
33
UC6
200,7
190,7
48
38
33
Dimensions in mm
Milled enclosures – RF-enclosures
9
TC-series
The rf-/microwave enclosures are designed to built-in TO-8 devices, to insure
sufficient heat transfer and
ground connection to each module. The
boards can be mounted in close contact
to TO-type enclosures.
Material
Aluminum base alloy
Design
With exceeding 3mm-bottom plate. Completed with all drill holes for mounting
bottom plate, flange mount jacks, for
feed through filters and ground connectors.
Content of delivery
Enclosures with bottom plate, mounting
material , 2 RF-jacks, 1 ground connector,
1 feed through filter, 1 blind plug UNEF
12-32 and M1,4 screws (circuit board
mounting).
Configuration of model designation
TC2 - TA - 5 4
RF-ports female
0 = BNC
2 = TNC
4 = SMA
8=N
5 = 50 Ω
7 = 75 Ω
Standard surface TR, TA, CN
Size
Standard design
Model
La
Li
Ba
Bi
H
I
TC2
35
29
25,4
19,4
21
25
TC4
61
55
25,4
19,4
21
51
TC5
74
68
25,4
19,4
21
64
Dimensions in mm
10
Milled enclosures
Dimensions, TC series
TC2
Circuit board mounting
TC4
TC5
Dimensions in mm
Milled enclosures – RF-Hybrid enclosures
11
ZG-series
The ZG aluminum enclosures are designed
to built-in RF/microwave hybrid-thinfilmand stripline-circuits.
The ZG-series represent an ideal enclosure
for RF hybrid circuits and LSI applications.
All inside dimensions are in inch.
쮿 Material
Aluminum base alloy
쮿 Content of delivery
Enclosures with inlay cover and the
mounting screws M2.
Enclosures with inlay cover and the mounting
screws M2.
Configuration of model designation
ZG 1 - 2 - TR
Surface
TR = vibratory finishing
TA = yellow alodyned
CN = nickel-plated
(see technical information)
Dimensions, ZG series
Basic design
ZG1-2
ZG2-2
ZG3-2
ZG4-2
Dimensions
2 = screwed inlay cover
Outside (mm)
33,6 x 53,6 x 20*
33,6 x 79 x 20*
59 x 79 x 20*
59 x 129,8 x 20*
Enclosure 1, 2, 3, 4
Circuit board
1" x 1"
1" x 2"
2" x 2"
2" x 4"
ZG series
* Other dimensions on request!
Dimension, ZG series
ZG1-2
ZG4-2
ZG3-2
ZG2-2
Side view
All dimensions in mm
12
Milled enclosures – solid lightweight enclosures
RG series
Low weight enclosures milled out of a full
aluminum block with rounded edges. Ideal for batteries or portable power supply.
The RG series is used in the medical industry also.
Material
쮿 Enclosures
Aluminum base alloy
쮿 Cover
Aluminum base alloy
Option (on request)
쮿 Material
쮿 Surface (colored anodize)
쮿 Treatment and colored anodizing as
desired
쮿 Other dimensions are possible
Content of delivery
Enclosures include cover and
screws
Configuration of model designation
RG6 - TR
Surface
TR, TA, TN, TE + color
(see technical information)
Dimensions, RG series
Model
Dimensions in mm
Standard design
Design
dimensions (mm)
La
Li
Ba
Bi
Ha
Hi
RG1
39
35
39
35
19
15
RG2
49
45
49
45
19
15
RG3
59
55
59
55
19
15
RG4
79
75
79
75
19
15
RG5
99
95
99
95
19
15
RG6
49
45
39
35
19
15
RG7
59
55
39
35
19
15
RG8
79
75
39
35
19
15
RG9
99
95
39
35
19
15
RG10
59
55
49
45
19
15
RG11
79
75
49
45
19
15
RG12
99
95
49
45
19
15
RG13
99
95
79
75
19
15
Experimental enclosures
13
EH series
The enclosures are manufactured out of
an aluminum tube and are closed at the
ends with flat screws mounted covers on
both sides.
Especially, they are suitable for building
up attenuators or similar passive
elements.
쮿 Enclosures
Aluminum base alloy
쮿 Cover
Aluminum base alloy
2 mm thick, mounted with screws
M2x6
쮿 Content of delivery
Enclosures with two flat covers
including mounting material and RFconnectors.
RF-different connecting interfaces, EH
series
Exampel 1
Dimensions, EH series
EH1
Exampel 2
EH2
Exampel 3
EH3
Exampel 4
BNC female:
BNC male:
TNC female:
TNC male:
SMA female:
1.6/5.6 female:
1.6/5.6 male:
N female:
N male:
SMB female:
SMC female:
0 = 50 Ω, M = 75 Ω
1 = 50 Ω, N = 75 Ω
2 = 50 Ω, P = 75 Ω
3 = 50 Ω, R = 75 Ω
4 = 50 Ω
6 = 75 Ω
7 = 75 Ω
8 = 50 Ω, S = 75 Ω
9 = 50 Ω, T = 75 Ω
A = 50 Ω
C = 50 Ω
Configuration of model designation
Enclosure
Dimensions (mm)
La
Ba
Ha
EH1
40
30
30
EH2
50
20
20
EH3
60
40
30
All dimensions in mm
EH1 - 1 - TR - 1A
Combination of connectors and their position
Surface
TR = raw
CN = nickel plated
Versions
1 = without ground pin
2 = with ground pin
Enclosures
14
Profile enclosures
G series
With the G series, you have the opportunity, to order enclosures of the SG, SB,
PGS and TG series in various heights. We
will deliver these enclosures short-term
and in small number of pieces.
Dimensions, G series
Combination of cover and bottom
Our large selection gives you the possibility to choose your own special enclosure.
Available tube profiles
Ba x La
30 x
40 mm
Ba
x La
60 x
60 mm
60 x
80 mm
40 x
30 mm
60 x 100 mm
40 x
40 mm
60 x 120 mm
40 x
50 mm
60 x 140 mm
40 x
60 mm
40 x
80 mm
Dimensions in mm
80 x
80 mm
40 x 100 mm
80 x 100 mm
40 x 120 mm
80 x 140 mm
40 x 150 mm
80 x 150 mm
40 x 180 mm
80 x 160 mm
80 x 200 mm
50 x
40 mm
50 x
50 mm
80 x 220 mm
50 x
60 mm
100 x 100 mm
50 x
80 mm
100 x 150 mm
50 x 100 mm
100 x 200 mm
50 x 120 mm
50 x 150 mm
Cover and bottom plate versions
Type 0
Enclosures without
mounting drill holes,
cover and bottom plate
Type 5
3 mm thick screwed
profile cover or bottom plate
Type 1
2 mm thick screwed
cover and bottom
plate.
Preferred type 6
Screw mounted, flat
exceeding bottom plate (2 mm thick) with
mounting holes (Ø 3,2
mm)
Type 2
Inlay cover and bottom
plate
Preferred type 7
3mm thick exceeding
profile cover or bottom plate
Preferred type 3
Inlay screwed cover and
bottom plate
Type 8
Screwed exceeding
3mm thick profile cover
or bottom plate with
mounting holes (Ø 3,2
mm)
Preferred type 4
3 mm thick profile
cover or bottom plate
Type 9
2mm thick flat cover or
bottom plate.
50 x 180 mm
50 x 200 mm
Configuration of model designation
G 1 2 - 80 - 60 - 45 - TR
Standard surface
TR, TA, CN
(see technical Information)
Height H
Length La
Width Ba
Bottom
Cover
Design
Do you desire a large amount of mounting screws or do you need other positions?
Please call us!
Profile
Profiles
Profiles
15
Dimensions of structure
Cover structure P 40 – P 100
P 60
Precision profiles
Material: aluminum base alloy
Tolerance after DIN 17615
Cover profiles P 40 – P 100
Like the SG, SB, TG and G series
P 40
P 80
Side-piece profiles SP 1 – SP 4
Like KG, KGT, EG and EGD series
P 50
P 100
Side-piece profiles SP 1 – SP4
SP 4
SP 3
SP 2
SP 1
Dimensions in mm
Profile enclosures
PGS series
All enclosures of PGS series are equipped
with a flat bottom plate and an inlay
cover, which get screwed in the enclosures. The PGS series are suitable to built-in
rf-components, hybrid circuits and all
kinds of small components.
PGS enclosures are very sturdy and extensively RF shielded. Enclosures, covers and
bottom plates are made out of aluminum.
All of our enclosures of the PGS series
have the same height of 22 mm.
If other heights are needed, see the G
series.
Principle construction
= 22
16
Technical data and information for ordering
Design
dimensions (mm)
Ba
La
L
l
PGS40-30-22-TR
40
30
50
40
PGS40-40-22-TR
40
40
60
50
PGS40-50-22-TR
40
50
70
60
PGS40-60-22-TR
40
60
80
70
PGS40-80-22-TR
40
80
100
90
PGS40-100-22-TR
40
100
120
110
PGS40-120-22-TR
40
120
140
130
Construction of model designation
PGS40-150-22-TR
40
150
170
160
PGS 80 - 60 - 22 - TR
PGS40-180-22-TR
40
180
200
190
Standard surface
TR, TA, CN
(see technical information)
PGS50-40-22-TR
50
40
60
50
PGS50-50-22-TR
50
50
70
60
PGS50-60-22-TR
50
60
80
70
Height H
PGS50-80-22-TR
50
80
100
90
PGS50-100-22-TR
50
100
120
110
PGS50-120-22-TR
50
120
140
130
PGS50-150-22-TR
50
150
170
160
PGS50-180-22-TR
50
180
200
190
PGS50-200-22-TR
50
200
220
210
PGS60-60-22-TR
60
60
80
70
PGS60-80-22-TR
60
80
100
90
PGS60-100-22-TR
60
100
120
110
PGS60-140-22-TR
60
140
160
150
PGS80-60-22-TR
80
60
80
70
PGS80-80-22-TR
80
80
100
90
PGS80-100-22-TR
80
100
120
110
PGS80-140-22-TR
80
140
160
150
PGS80-150-22-TR
80
150
170
160
PGS80-160-22-TR
80
160
180
170
PGS80-200-22-TR
80
200
220
210
PGS80-220-22-TR
80
220
240
230
PGS100-100-22-TR
100
100
120
110
PGS100-150-22-TR
100
150
170
160
PGS100-200-22-TR
100
200
220
210
Lenght La
Width Ba
Design
Profile enclosures
17
SG series
The corpus of the enclosures are made
out of a square pipe. The enclosures are
closed with profile covers (see chapter
“profiles”).
These are designed once as flush locked
covers and once as exceeding bottoms,
like a mounting flange. Especially they
are suitable for mounting powers supplies, control devices, switches or similar
components. The profile webs in the bottom plate can be used as support.
If other dimensions are desired, please see
the G-series.
Principle construction
Technical details and information of ordering
Dimensions of enclosures with profile
bottom plates and covers, SG series
Series SG80-…
Series SG100-…
Dimensions in mm
Design
dimensions (mm)
Ba
La
L
H
SG80-60-45-TR
80
60
80
45
SG80-80-45-TR
80
80
100
45
SG80-80-65-TR
80
80
100
65
SG80-100-45-TR
80
100
120
45
SG80-100-65-TR
80
100
120
65
SG80-140-40-TR
80
140
160
40
SG80-140-45-TR
80
140
160
45
SG80-140-50-TR
80
140
160
50
SG80-140-73-TR
80
140
160
73
SG80-150-40-TR
80
150
170
40
SG80-150-45-TR
80
150
170
45
SG80-150-50-TR
80
150
170
50
SG80-150-73-TR
80
150
170
73
SG80-160-40-TR
80
160
180
40
SG80-160-45-TR
80
160
180
45
SG80-160-50-TR
80
160
180
50
SG80-160-73-TR
80
160
180
73
SG80-200-40-TR
80
200
220
40
SG80-200-56-TR
80
200
220
56
SG80-200-86-TR
80
200
220
86
SG80-220-40-TR
80
220
240
40
SG80-220-56-TR
80
220
240
56
SG80-220-86-TR
80
220
240
86
SG100-100-40-TR
100
100
120
40
SG100-100-45-TR
100
100
120
45
SG100-100-50-TR
100
100
120
50
SG100-100-73-TR
100
100
120
73
SG100-150-40-TR
100
150
170
40
SG100-150-45-TR
100
150
170
45
SG100-150-50-TR
100
150
170
50
SG100-150-73-TR
100
150
170
73
SG100-200-40-TR
100
200
220
40
SG100-200-45-TR
100
200
220
45
SG100-200-50-TR
100
200
220
50
SG100-200-73-TR
100
200
220
73
Profile enclosures
18
KG series
These enclosures are specially customized
(we produce unique pieces also). Customers will decide about width and depth.
You can choose the height between 1 HU,
2 HU, 3 HU or 4 HU. (See side-pieces –
chapter “profiles”). KG enclosures are
used in data technology, in the electronic,
in testing sets, in engine constructions,
etc..
Dimensions, KG series
쮿 Material
Aluminum
쮿 Content of delivery
Enclosures with a 3mm thick front-and
rear panel. Depth and width as
required by the customer
쮿 Options
We also offer handles and pedestals
for the enclosures.
Profile overview, KG series
Design
height unit (H )
SP-1
1 HE ( 40,0 mm)
SP-2
2 HE ( 82,0 mm)
SP-3
3 HE (126,5 mm)
SP-4
4 HE (171,0 mm)
Configuration of model designation
KG 2 - 220 - 150 - TR
Surface
TR, TA, CN, TE, TEF
(see technical
information)
Width B (mm)
Depth T (mm)
Height H (HE)
Design
➀ Side-piece 1-4 HU
➃ Front panel
➁ Cover
➄ Rear panel
➂ Bottom plate
Dimensions in mm
Profile enclosures
19
Sectional drawing, KG series
Rear panel
Cover
Side-piece
Side-piece
Front panel
Bottom
plate
Special design
We also design front panels on request,
e.g. with drill holes, surface treatments,
screen process, etc .
Application
Application
The picture aside shows you an open
enclosure equipped with circuit boards in
European standard card format.
20
Cassette enclosures – RF-milled enclosures
FK series, 3 HU
For an optimum shielding of high frequency elements we have the perfect
solution: The FK series. These cassette
enclosures are milled out of an aluminum
block. Their size is designed in European
standard card format for 19 ”plug-in
module to DIN 41494 (part 5). The speciality of these cassettes is, that the dimensions inside show European Standard Card
format also (100 x 160 mm) and the circuit
boards are fixed in norm position. Cassettes in the same design are deliverable as a
6-HU-cassette (233,4 x 160 mm or 233,4 x
220 mm) also .Both cassette types are
offered in 6 different widths (5 TE, 6 TE, 7
TE, 8 TE, 10 TE and 12 TE). Partial measures are called TE (1 TE = 5,08 mm).
Front panels
Aluminum, 2,5 mm thick standard:
colorless anodized, back side chromized
with plastic nipples current conducting:
colorless anodized, back chromized with
metall nipples
Height (H)
3 HU = 128,40 mm
6 HU = 261,80 mm
Width (Ba)
5 TE =
6 TE =
7 TE =
8 TE =
10 TE =
12 TE =
25,00 mm
30,10 mm
35,20 mm
40,30 mm
50,40 mm
60,60 mm
Content of delivery
Milled frame with two inlay covers completed with screws to fix the covers. If the
front panel is ordered, we add the mounting material.
Special design
The basic structure can include sections
and separators as well as mounting provisions for various plugs made on request.
Configuration of model designation
FK3 1 - 5 - 1 - 2 - TR
Standard surface TR, TA, CN (see technical information)
Millings for connectors
0 = without millings
1 = for 96-pole connectors to DIN 41612
2 = for 9-pole SUB-D connectors
3 = for 15-pole SUB-D connectors
4 = for 25-pole SUB-D connectors
Front panel
1 = without front panel
2 = with standard front panel without handles
3 = with standard front panel with handles
4 = with current conducting front panel without handles
5 = with current conducting front panel with handles
Width Ba (5 = 5 TE, 6 = 6 TE, 7 = 7 TE, 8 = 8 TE, 10 = 10 TE, 12 = 12 TE)
Depth (1 = 160 mm, 2 = 220 mm)
Basic version (FK 3 = 3 HU)
Cassette enclosures – RF-milled cassettes
21
FK series, 6 HU
Construction and dimensions, FK series
Front panel
Ba
H
enclosures
h
5 TE
25,00
24,5
10,4
6 TE
30,10
29,5
15,4
Configuration of model designation
7 TE
35,20
34,6
20,5
FK6 1 - 5 - 1 - 0 0 - TA
8 TE
40,30
39,6
25,5
Standard surface TR, TA, CN (see technical information)
10 TE
50,40
49,8
35,7
Millings for connectors above
12 TE
60,60
59,8
45,7
Dimensions in mm
Millings for connectors below
0 = without millings
1 = for 96-pole connectors to DIN 41612
2 = for 9-pole SUB-D connectors
3 = for 15-pole SUB-D connectors
4 = for 25-pole SUB-D connectors
Front panel
1 = without front panel
2 = with standard front panel without handles
3 = with standard front panel with handles
4 = with current conducting front panel without handles
5 = with current conducting front panel with handles
Width Ba
5 = 5 TE
6 = 6 TE
7 = 7 TE
8 = 8 TE
10 = 10 TE
12 = 12 TE
Depth
1 = 160 mm
2 = 220 mm
Basic design (FK 6 = 6 HU)
22
Cassette enclosures
Dimensions, FK series, 3 HU
Sectional drawing of
length of the enclosures with millings
for connectors to DIN
41612 and mounted
Europe card
deep
Dimensions in mm
Millings for connectors, FK series, 3 HU
FK cassette with millings for 64/96-pole connectors to DIN 41612
FK31 cassette with millings for SUB-D connectors
25-pole
15-pole
9-pole
Please, see the chapter of drilling hole-pattern for
dimensions for millings
Dimensions in mm
Fitting examples, FK series, 3 HU
FK31 cassette with an angled SUB-D connector, 25-pole, including adapter
plate for standard 19” module rack to DIN 41494.
FK31 cassette in a module rack to DIN 41494. The combined design is
with filtered SUB-D connectors and rf-connectors.
Possibility to place SMS-RF-connectors.
Adapter plate
to DIN 41612
Adapter plate
to DIN 41612
RF-ports
Cassette enclosures
23
Dimensions, FK series, 6 HU
Sectional drawing about length of the enclosures and millings
for connectors to DIN 41612 and mounted Europe card.
Millings of connectors
FK cassette with 6 HU, the back
with millings for 64/96-pole connectors to DIN 61412.
FK cassette with 6 HU, the
back with millings for SUB-D
connectors 25-pole.
position top
position top
position bottom
position bottom
deep
Dimensions in mm
Accessories for cassettes of
the FK series
Adapter plate with SUB-D-connector to
build-in a module rack to DIN 41494.
Dimensions, adapter plate
AP 25
AP 15
AP 9
쮿 AP 25 for 25-pole SUB-D connector
쮿 AP 15 for 15-pole SUB-D connector
쮿 AP 9 for 9-pole SUB-D connector
Configuration of model designation
AP 9 - TR
Standard surface TR, TW
(see technical information)
Adapter plate for 9-pole SUB-D
connector
Filtered miniature D-Sub
connector
쮿 We also deliver filtered miniature
D-Sub connectors
Dimensions in mm
24
19”-plug in module
EG series
The 19” plug-in modules are available in 6
different heights. An extremely stable
and robust construction is reached after
using thick extrusion type side-pieces
(4mm). Profile slots in the side pieces give
the user the possibility to mount various
components sideways, also. The side pieces can be exchanged fast and simple.
Drill holes and other mechanical modifications, just like front panel lettering are
possible on request.
The enclosures are delivered with handles, alternatively with chroming round bar
steel or with cast aluminum. Different
sizes and versions of these 19” plug-in
module are available in short-term. If not
specified, the bottom plate, the front and
back panel are coated with a protection
foil and the side-pieces are aluminum raw
(vibro-finished).
Surface
Following options are available:
Nickel-plated, alodyned or anodized (see
technical information)
Content of delivery
Each 19” plug-in module is packed and
delivered as a complete set including all
necessary screws. Ordered without handles, the front panels won´t have drill holes
to mount handles.
Technical information, EG series
Depth of cover up to 150 mm
Material: aluminum,
width: 399 mm (mounting area),
thickness: 3 mm
Cover : 150mm depth
Material: aluminum cover perforates
(variable versions, see our order key)
Width: 399 mm (mounting area),
thickness: 0,8 mm
Surface
Standard version:
No surface treatment. On request we
will deliver yellow alodyned or colorless anodized also .
Rear panel, RP series
Material: aluminum base alloy, width: 433 mm, thickness: 3 mm
Front panel, FP series
Material: aluminum base alloy
Width: 19” (482,6 mm), height: 1to 6 HU
Thickness: 4 mm (3 mm optional)
Information about 19” front and rear panels as well as handles, please see chapter “accessories”.
Dimensions of side-pieces of the SP series see chapter “profiles”.
Side-piece
Material: aluminum
base alloy (extruded
section),
height: see diagram
Bottom plate
Material: aluminum base alloy
Thickness: 3 mm (standard), on request 4 mm available
19”-plug-in module
25
Configuration of model designation
EG 1 - 150 - 1 - 4 - GRS-1 - X
Sectional drawing, EG series
Surface treatment
on request
(see technical information)
Handle design
(on request)
Round bar steel
GRS-12 = 1 HU
GRS-22 = 2 HU
GRS-32 = 3 HU
GRS-42 = 4 HU
GRS-52 = 5 HU
Cast aluminum
GRA-22 = 2 HU
GRA-32 = 3 HU
GRA-42 = 4 HU
GRA-52 = 5 HU/6 HU
Front panel
3 = 3 mm thick
4 = (4 mm thick,
standard)
Cover
1 = perforated
aluminum
cover,
blue varnished,
standard depth
at 150 mm
2 = perforated
aluminum
cover,
surface: raw
3 = perforated alu
minum cover,
surface: color
less anodized
4 = perforated
aluminum
cover,
surface: yellow
alodyned
5 = perforated
steel cover,
surface: gray
varnished
6 = aluminum
cover, 3 mm
thick (raw, not
perforated),
standard depth
up to 150 mm
Standard design
Depth T 1-HE-Model
(mm)
h = 40 mm
2-HE-Model
h = 82 mm
3-HE-Model
4-HE-Model
h = 126,5 mm h = 171 mm
5-HE-Model 6-HE-Model
h = 208,5 mm h = 253 mm
100
EG1-100-6-4
EG2-100-6-4
EG3-100-6-4
EG-4-100-6-4 EG5-100-6-4
EG6-100-6-4
150
EG1-150-1-4
EG2-150-1-4
EG3-150-1-4
EG-4-150-1-4 EG5-150-1-4
EG6-150-1-4
250
EG1-250-1-4
EG2-250-1-4
EG3-250-1-4
EG-4-250-1-4 EG5-250-1-4
EG6-250-1-4
350
EG1-350-1-4
EG2-350-1-4
EG3-350-1-4
EG-4-350-1-4 EG5-350-1-4
EG6-350-1-4
450
EG1-450-1-4
EG2-450-1-4
EG3-450-1-4
EG-4-450-1-4 EG5-450-1-4
EG6-450-1-4
550
EG1-550-1-4
EG2-550-1-4
EG3-550-1-4
EG-4-550-1-4 EG5-550-1-4
EG6-550-1-4
650
EG1-650-1-4
EG2-650-1-4
EG3-650-1-4
EG-4-650-1-4 EG5-650-1-4
EG6-650-1-4
5 HU versions are based on a combination of side-pieces of the type SP2 (2 HU) and the type SP3 (3 HU).
6 HU versions are based on a combination of side-pieces of the type SP3 (3 HU).
Dimensions, EG series
Depth (150 mm)
Basic design
Perforated covers are only available in the sizes
150 / 250 / 350 / 450
Dimensions in mm
26
Handles
GRS and GRA series
GRS series
The handles of this serie are made out of
ground, polished, high gloss chromed
round barsteel with 8 and 10 diameters.
Female thread with M4 respectively M5.
They´ll be delivered by pairs with two
washers and the matching screws.
Design
Height HU
Dimensions in mm
L
D
threads
H
GRS-12
1
32
8
29
M4
GRS-22
2
55
10
36
M5
GRS-32
3
88
10
36
M5
GRS-42
4
120
10
36
M5
GRS-52
5/6
180
10
36
M5
GRA series
All surfaces are sandblasted and anodized. The female thread is M5. They´ll be
delivered by pairs and with the matching
screws.
Design
Height HU
Dimensions in mm
L
b
GRA-12
1
25
GRA-22
2
55
69
GRA-32
3
88
102
GRA-42
4
120
134
GRA-52
5/6
180
194
41
19”-plug in module – RF-shielded
EGD series
Beside plug-in modules of the EG series,
we produce 19” plug-in modules with RF
shield (EGD series) also. In spite of the
proved slot and spring principle, it is only
possible to remove the cover and the bottom from the front and rear panel
without dismantling, if the parts get overworked. Special drillings and millings on
request.
Other dimensions on request.
Surface
Standard: Aluminum vibratory finishing.
Following surfaces are optionally
available: Alodyned (low priced surface
protection), chemical nickel-plated (corrosion resisting), optimal shield of magnetic
source of interference
(see technical information).
Content of delivery
Each 19” plug-in module is packed and
delivered as a complete set including all
necessary mounting screws. Front panels
won´t have drill holes, if ordered without
handles.
Special versions
We also deliver 19” plug-in module on
request.
Technical information, EGD series
27
28
19” plug-in module
Dimensions of enclosures, EGD series
Front view
Rear view
Drill holes for handles, only if ordered.
Dimensions in mm
Configuration of model designation
Dimensions of 19”-front and rear panels
EGD 2-250 - GRS 22 - X
Design
Height of units
front panel in mm
rear panel in mm
EGD2
2 HE
482,6 x 88,1 x 4
443 x 82,0 x 4
EGD3
3 HE
482,6 x 132,5 x 4
443 x 126,0 x 4
EGD4
4 HE
482,6 x 177,0 x 4
443 x 171,0 x 4
EGD5
5 HE
482,6 x 221,4 x 4
443 x 208,5 x 4
EGD6
6 HE
482,6 x 265,9 x 4
443 x 253,0 x 4
Standard surface
treatment on request
(see technical information)
Versions of handles
Round bar steel
GRS-12 = 1 HU
GRS-22 = 2 HU
GRS-32 = 3 HU
GRS-42 = 4 HU
GRS-52 = 5 HU/6 HU
Cast aluminum
GRA-22 = 2 HU
GRA-32 = 3 HU
GRA-42 = 4 HU
GRA-52 = 5 HU/6 HU
Standard design
Further information see chapter “accessories”, FP series.
Standard designs
Depth T
(mm)
2 HE
h = 82 mm
3 HE
h = 126,5 mm
4 HE
h = 171 mm
5HE
h = 208,5 mm
6 HE
h = 253 mm
250
EGD2-250
EGD3-250
EGD4-250
EGD5-250
EGD6-250
350
EGD2-350
EGD3-350
EGD4-350
EGD5-350
EGD6-350
450
EGD2-450
EGD3-450
EGD4-450
EGD5-450
EGD6-450
Cassette enclosures – RF-cassettes
29
HK series
The 3-HU aluminum cassettes fit in every
4,4” module rack to DIN 41494 or, under
assistance of guide bars (KF2 series), into
any 19”-Europe card plug-in modules to
DIN 41494. The HK serie is available in
two different depths to take up Europe
cards with 100 x 160 mm or 100 x 220
mm.
Both cassette types are available in 4 different widths (7 TE, 14 TE, 21 TE and 28
TE). The distance of the guide slots for the
circuit boards is 1 TE (5,08 mm).
We also supply the cassettes with length
partition walls on request.
Standard surface
Cassette and rear panel vibratory
finishing, colorless alodyned. Front panel
colorless anodized, the back chromized.
Content of delivery
Cassette with mounted front and rear
panel including M2,5 neck screws.
The HK serie is available in 4 different widths and 2 different length.
Applications
Back with a mounted connector.
RF-cassettes with different widths in a 19” module rack.
The HK cassettes can be placed individual in a
module rack with 7 TE raster back plane.
The cassettes can be changed fast and without any
problems.
Standard design
Design
Height of front panel
(3 HU)
width of front panel
B
Length of profile
T
HK07-1
128,4 mm
7 TE = 35,2 mm
160 mm
HK04-2
128,4 mm
7 TE = 35,2 mm
220 mm
HK14-1
128,4 mm
14 TE = 70,8 mm
160 mm
HK14-2
128,4 mm
14 TE = 70,8 mm
220 mm
HK21-1
128,4 mm
21 TE = 106,3 mm
160 mm
HK21-2
128,4 mm
21 TE = 106,3 mm
220 mm
HK28-1
128,4 mm
28 TE = 141,9 mm
160 mm
HK28-2
128,4 mm
28 TE = 141,9 mm
220 mm
30
Cassette enclosures
Configuration of model designation
HK07 - 1 - 2 - 1
1 = Rear panel without millings
2 = Rear panel with millings
for connectors to DIN 41612
2 = with front panel, without
handles
3 = with front panel, with
handles
1 = for Europe cards
100 x 16 mm
2 = for Europe cards
100 x 220 mm
Design
Dimensions, HK series
7 TE
14 TE
28 TE
21 TE
Dimensions in mm
19” module rack
31
EB series
19” module racks, which are holding highest mechanical stability. A speciality are
the full length extruded side-pieces profiles. These general-purposed module racks
are suitable to built-in assemblies based
on the standard card format to DIN 41494
part 1 -5. Assemblies and Europe cards
can be built-in in the front and/or in the
back.
Generally, the module rack includes two
handles.
Material
Aluminum
Surface
White alodyned.
Offers best design as well as additional
surface protection.
Content of delivery
As an unmounted kit including side-pieces
with height rows and termination extrusions, horizontal extrusions, female multipoint connectors, threaded rails M2,5,
handles and mounting accessories.
Part front panel and rear panel are not
included but can be separately ordered.
(see technical information)
Standard design
Design
width
B (mm)
b (mm)
depth
T (mm)
t (mm)
height
H (mm)
hs (mm)
e (mm)
EB3-245
447,4
426,72
244,6
232,6
3HU = 132,5
112,5
57,1
EB3-305
447,4
426,72
304,6
292,6
3HU = 132,5
112,5
57,1
EB3-425
447,4
426,72
424,6
412,6
3HU = 132,5
112,5
57,1
EB3-545
447,4
426,72
544,6
532,6
3HU = 132,5
112,5
57,1
EB6-245
447,4
426,72
244,6
232,6
6HU = 265,9
245,9
190,5
EB6-305
447,4
426,72
304,6
292,6
6HU = 265,9
245,9
190,5
EB6-425
447,4
426,72
424,6
412,6
6HU = 265,9
245,9
190,5
EB6-545
447,4
426,72
544,6
532,6
6HU = 265,9
245,9
190,5
Configuration of model designation
EB3-245 - 1 - 1 - X
Examples for the equipment, EB series
Special surface treatment on
request
Equipment back
0 = without equipment
1 = 3 HU
for a card format 100 x 160 mm
2 = 3 HU
for a card format 100 x 220 mm
3 = 6 HU for a card format
233,4 x 160 mm
4 = 6 HU
for a card format 233,4 x 220 mm
5 = 6 HU for two cards with
100 x 160 mm
6 = 6 HU for two cards with
100 x 220 mm
Equipment front
0 = without equipment
1 = 3 HU for a card format
100 x 160 mm
2 = 3 HU
for a card format 100 x 220 mm
3 = 6 HU
for a card format 233,4 x 160 mm
4 = 6 HU
for a card format 233,4 x 220 mm
5 = 6 HU
or two cards with 100 x 160 mm
6 = 6 HU
for two cards with 100 x 220 mm
Standard design
(see design general view)
Front view
Design EB3
EB3-305-1-0
Front view
Design EB6,
Partitioned
heights
EB6-305-0-4
EB3-425-1-1
Top view
EB6-425-3-5
Dimensions in mm
32
19”-front/back/dummy panels
FP, RP, BP series
Standard 19”-front, rear and dummy
panels are available in 6 different sizes
and can be delivered ex stock.
Dimensions, front and rear panels
Front and dummy panels, FP and BP series
Versions and material
Front panels:
Material is 4 mm thick, aluminum base
alloy, available with and without drill
holes for handles (covered with
protection foil).
Rear panels:
Material is 3 mm thick, aluminum base
alloy
Dummy plate:
Material 4 mm thick, one side is covered
with a protection foil.
Surfaces
Without any particulars about the surface
we´ll deliver the front, rear and dummy
panels blank, without chemical surface
treatment. The following surfaces are
optionally available :
Yellow alodyned (ideal priming for
further treatment )
Colorless anodized
Colored anodized (for example black)
Varnished to RAL
1 – 4 HE
5 – 6 HE
* Only for FP series
** Only for handles
Rear panels, RP series
1 – 4 HE
5 – 6 HE
Dimensions in mm
19” front panels, standard design
Design
height HE dim. in mm
A
B
C
D
E
F
Drill holes
Front panels:
FP series with mounted drill holes for the
side-pieces and elongated holes.
FPx-GR series with additional drill holes
for handles.
Rear panels:
RP series with mounted drill holes for the
side-pieces.
Dummy panels:
BP series with elongated holes only.
FP1
1
19" x A x 4
43,6
31,7
–
–
28,0
–
FP2
2
19" x A x 4
88,1
76,2
–
–
70,0
–
FP3
3
19" x A x 4
132,5
57,1
–
–
114,5
–
FP4
4
19" x A x 4
177,0
101,6
–
–
159,0
–
FP5
5
19" x A x 4
221,4
146,0
–
–
114,5
70,0
FP6
6
19" x A x 4
256,9
76,2
190,4
–
114,5
114,5
FP1-GR
1
19" x A x 4
43,6
31,7
–
32,0
28,0
–
FP2-GR
2
19" x A x 4
88,1
76,2
–
55,0
70,0
–
FP3-GR
3
19" x A x 4
132,5
57,1
–
88,0
114,5
–
Special versions
We do mechanical treatments on front
and rear panels (drillings, millings, etc.).
Front and rear panels are lettered by
screen print or gravure, e.g. with your
company-logo.
FP4-GR
4
19" x A x 4
177,0
101,6
–
120,5
159,0
–
FP5-GR
5
19" x A x 4
221,4
146,0
–
180
114,5
70,0
FP6-GR
6
19" x A x 4
256,9
76,2
190,4
180
114,5
114,5
front panel with 3 mm thickness on request
rear panels standard design
Design
height HE dim. in mm
h
E
F
RP1
1
443 x h x 3
40,0
28,0
–
RP2
2
443 x h x 3
82,0
70,0
–
RP3
3
443 x h x 3
126,5
114,5
–
RP4
4
443 x h x 3
171,0
159,0
–
RP5
5
443 x h x 3
208,5
114,5
70,0
RP6
6
443 x h x 3
253,0
114,5
114,5
19” dummy panels, standard design
Design
height HE Dim. in mm
A
B
C
D
E
F
BP1
1
19“ x A x 4
43,6
31,7
–
–
–
–
BP2
2
19“ x A x 4
88,1
76,2
–
–
–
–
BP3
3
19“ x A x 4
132,5
57,1
–
–
–
–
BP4
4
19“ x A x 4
177,0
101,6
–
–
–
–
BP5
5
19“ x A x 4
221,4
146,0
–
–
–
–
BP6
6
19“ x A x 4
265,9
76,2
190,4
–
–
–
Part front panels 3 HU and 6 HU
33
F and TF series
Compatible for all module racks to
DIN 41494
Dimensions, F and TF series
Material
Aluminum base alloy, 2,5 mm thick
Front panel is colorless anodized
Rear panel is chromized
F series
With plastic nipples
TF series
With metal nipples
Content of delivery
front panel with holes 5,9 x 3,3 mm;
F series with black plastic nipples
(unmounted), TF series with metal
nipples; including M2,5 x 11 neckscrews
Configuration of model designation
F
3
2 - 10
Width A (TE)
2 = without handles
3 = with handles
Height 3 HU (128,5 mm)
or 6 HU (261,8 mm)
F = plastic
TF = metal
Standard design
Dimensions in mm
A
B
C
Design without handles
3 HU
6 HU
3 HU
H = 128,5 mm H = 261,8 mm
6 HU
Design with handles
3 HU
6 HU
3 HU
6 HU
3 TE
14,84
–
–
F32-3
F62-3
TF32-3
TF62-3
F33-3
F63-3
TF33-3
TF63-3
4 TE
19,92
–
–
F32-4
F62-4
TF32-4
TF62-4
F33-4
F63-4
TF33-4
TF63-4
5 TE
25,00
–
–
F32-5
F62-5
TF32-5
TF62-5
F33-5
F63-5
TF33-5
TF63-5
6 TE
30,08
–
–
F32-6
F62-6
TF32-6
TF62-6
F33-6
F63-6
TF33-6
TF63-6
7 TE
35,16
–
–
F32-7
F62-7
TF32-7
TF62-7
F33-7
F63-7
TF33-7
TF63-7
8 TE
40,24
25,4
–
F32-8
F62-8
TF32-8
TF62-8
F33-8
F63-8
TF33-8
TF63-8
10 TE
50,40
35,56
–
F32-10
F62-10
TF32-10
TF62-10
F33-10
F63-10
TF33-10
TF63-10
12 TE
60,56
45,72
–
F32-12
F62-12
TF32-12
TF62-12
F33-12
F63-12
TF33-12
TF63-12
14 TE
70,72
55,88
–
F32-14
F62-14
TF32-14
TF62-14
F33-14
F63-14
TF33-14
TF63-14
16 TE
80,88
66,04
–
F32-16
F62-16
TF32-16
TF62-16
–
–
–
–
20 TE
101,20
86,36
–
–
–
TF32-20
TF62-20
–
–
–
–
21 TE
106,28
91,44
–
F32-21
F62-21
TF32-21
TF62-21
F33-21
F63-21
TF33-21
TF63-21
24 TE
121,52
106,86
–
–
–
TF32-24
TF62-24
–
–
–
–
27 TE
136,76
121,92
–
–
–
TF32-27
TF62-27
F33-27
F63-27
TF33-27
TF63-27
28 TE
141,84
127,00
–
F32-28
F62-28
TF32-28
TF62-28
F33-28
F63-28
TF33-28
TF63-28
30 TE
152,00
137,16
–
F32-30
F62-30
TF32-30
TF62-30
–
–
–
–
32 TE
162,16
147,32
–
F32-32
F62-32
TF32-32
TF62-32
–
–
–
–
36 TE
182,48
167,64
–
F32-36
F62-36
TF32-36
TF62-36
–
–
–
–
40 TE
202,80
187,96
–
F32-40
F62-40
TF32-40
TF62-40
–
–
–
–
41 TE
207,88
193,04
–
F32-41
F62-41
TF32-41
TF62-41
–
–
–
–
42 TE
212,96
198,12
–
F32-42
F62-42
TF32-42
TF62-42
–
–
–
–
44 TE
223,12
208,28
–
F32-44
F62-44
TF32-44
TF62-44
–
–
–
–
60 TE
304,40
289,56
147,32
F32-60
F62-60
TF32-60
TF62-60
–
–
–
–
63 TE
319,64
304,80
147,32
F32-63
F62-63
TF32-63
TF62-63
–
–
–
–
81 TE
411,08
396,24
198,12
F32-81
F62-81
TF32-81
TF62-81
–
–
–
–
84 TE
426,32
411,48
203,20
F32-84
F62-84
TF32-84
TF62-84
–
–
–
–
34
19” plug-in module enclosures
Cover and bottom plates, DB series
These cover and bottom plates are used in
module racks of the EB series.
Dimension, DB series
Version 1
Aluminum covers or bottoms
With ventilation slots, plastic coated, 1,5
mm thick.
Version 1
Version 2
Perforated cover sheet
Thickness: 1 mm
Holes: 2 mm diameter
Surface: white alodyned (Alodyne 1500)
Version 3
Aluminum cover/bottom by full material
Thickness: 2 mm
Surface: white alodyned
Content of delivery
1 cover or bottom
4 lens head screws M3 x 6
Version 2
Version 3
Abmessungen in mm
Configuration of model designation
DB245 - x
Version 1, 2 or 3
Design
Standard designs
Design
Application
Depth T (mm)
t (mm)
DB-245-X
EB3-245 / EB6-245
207
179
DB-305-X
EB3-305 / EB6-305
267
239
DB-425-X
EB3-425 / EB6-425
387
359
DB-545-X
EB3-545 / EB6-545
507
479
Cards and cassettes guide bars
Examples for 19-plug-in modules with mounted
card or cassettes guide bars.
Design
Depth
Application
KF1-160
160 mm
for the incorperation of plug-in moduls to DIN 41494
KF1-220
220 mm
for the incorperation of plug-in moduls to DIN 41494
KF2-160, 4.4 inch
160 mm
for the incorperation of plug-in moduls in 4,4" heights
KF2-220, 4.4 inch
220 mm
for the incorperation of plug-in moduls in 4,4" heights
Accessories
35
DC-feed throughs, ground connection ...
DC-feed throughs
We offer various models of teflon isolated
DC-feed throughs. Type D1 and KF1 are
delivered without nut and tooth lock
washer.
DC-feed throughs filters
Feed throughs filters prevent over power
supply, that the rf-signals enter respectively treat out of enclosures.
Technical data about DC-feed through
filters
max. voltage
(+85°C)
max. current
DF2
350 V DC
10 A
DF3
200 V DC
10 A
Delivered with nut and washer.
Technical data sheets are available on request.
Typical attenuation
DC-feed through filters
Insertion loss in dB
Type
Frequency in Hz
Ground connections, GP series
2 different types are available.
Brass tinned ground connections,
solderable passivated
Blind plug, BST Series
Made out of aluminum,
3 types are available
Soldering lug (100 units)
Brass, silver plated
Accessories EH-series
36
Accessories -screw taps
screw taps
To make the additional built-in of connectors, etc. in enclosures easier, we offer you
a number of screw taps.
Thread -Ø
in mm
x pitch
in mm
bore hole-Ø
in mm
Application
Metric threads ISO (DIN 13)
M1.4
–
1,1
Screws
M1.6
–
1,25
Screws
M2
–
1,6
Screws
M2.5
–
2,05
Screws
M3
–
2,5
Ground connection GP
M3.5
–
2,9
DC-feed through D1
M4
–
3,3
Screws
M5
–
4,2
Screws
Metric fine threads ISO (DIN 13)
M5
x 0,5
4,5
DC-feed through D2
M6
x 0,5
5,5
Screws
M6
M9
x 0,75
x 0,5
5,2
8,5
Screws
1.6/5.6 single hole connectors
M13
x 1
12,0
UNC 2
–56
1,8
Screws
UNC 3
–48
2,1
Screws
UNC 4
–40
2,3
Screws (mounted SUB-D)
UNC 8
–32
3,5
DC-feed through filter DF3
–32
4,1
RF-connectors, SMS, SMB,SMC
UNEF 12
–32
4,8
DC-feed through filters DF2
UNEF 3/8
–32
8,4
BNC-single hole connector
–36
5,7
SMA-single hole connector
N-single hole connectors
UNC threads
UNF threads
UNF 10
UNEF threads
UNS threads
UNS 1/4
Accessories – Screws and clamp
37
Screws and clamp
Design and description
size
LKS-M3 x 06-100
cross-recess oval head screw,
passivated high-grade steel to DIN 7985-A2
M3 x 6
LKS-M2,5 x 06-100
cross-recess oval head screw,
DIN 7985-A2
M2,5 x 6
SES-M2 x 06-100
cross-recess countersunk screw,
passivated high-grade steel to DIN 965-A2
M2 x 6
SES-M5 x 12-100
cross-recess countersunk screw,
passivated high-grade steel to DIN 965-A2
M5 x 12
SES-M3 x 06-100
cross-recess countersunk screw,
passivated high steel to DIN 965-A2
M3 x 6
SES-M2,5 x 06-100
cross-recess countersunk screw,
passivated high steel to DIN 965-A2
M2,5 x 6
application
coaxial flange connector
100
enclosures
100
enclosures
100
EG-plug in module
100
enclosures
100
cover mounting, AG-series
SESK-M2 x 06-3-100
M2 x 6
countersunk screw with a small head
(Ø 3,0 mm) and with cross slot, steel, nickel plated
cover mounting ZG/PGS/AGS
LKS-M1,4 x 04-100
M1,4 x 4
cross-recess oval head screw, self-tapped
(without chip), steel, nickel plated, to DIN 7500-C
mounting UC/AGS/TC
ULS-2,5-100
Washers for screws M2,5 to DIN 125 A
Ø 2,7
ULS-3-100
Washers for screws M3 to DIN 125 A
Ø 3,2
FES-2,5-100
spring washers, high-grade steel to DIN 137 A
Ø 2,7
FES3-100
Spring washers, high-grade steel to DIN 137 A
Ø 3,2
NIP-2
Metal nipples
100
100
100
coaxial flange connector
100
coaxial flange connector
100
coaxial flange connector
100
coaxial flange connector
NIP-1-100
Nipples, plastic, black
HS-M2,5-11-100
Neck screws, suitable for nipples 1 and 2
unit/ package
100
100
front panel, F series
M2,5 x 11
100
front panel, F/TF series
1
front panel, TF series
38
Technical information – mechanical treatment
Mechanical treatment
Front panels, back panels, enclosures and
cassettes are offered with mechanical
treatments also, that is drillings ,threads,
millings, fuses, switches, LED´s, DC-feed
through filter, etc.
Various drill-hole patterns and standard
millings, which are needed to fit in components are saved in our CNC -machines
and can be retrieved fast.
The drill-hole picture list makes it possible
for our customers to specify standard
drill-hole pictures and standard millings.
To manufacture, it´s enough to mark the
drill holes and the positions on a sketch.
We´ll send you the CAD drawings of our
enclosures in which you can mark your
drillings and millings, on request.
Surface treatments, lettering with screen
printing or gravures are possible.
Surfaces
Our enclosures are available in various
surface treatments.
Please, specify surface treatment with 2digits at the end of the order key, if you
order customized enclosures.
Surface structure (preliminary treatment)
T = vibratory finishing
P = polished (on request)
G = blasted
C = matt
Description of surfaces
T = vibratory finishing
Standard surface structure of all series in
the catalogue.
Surface refinement
R = raw (without chemical refinement)
A = yellow chromized (Alodyne 1200)
W = colorless chromized (Alodyne 1500)
N = chemical nickel plated (soldering)
E = colorless anodized
EF = colored anodized
(if ordered, specify color)
G = gilded
S = silvered
P = polished (manual)
Decorative surface
G = blasted
Matt version, decorative. Recommended,
if nickel-plated afterwards (problematical
at tapped blind hole).
C = chemical pickled, matt version (problematical at fits) chemical nickel plated.
The parts are powerless nickel-plated. The
surface can be soldered.
Layer 8 – 10 µ.
Example
ZG 1 - 2 - T R
Surface refinement
Surface structure
Anodized
Aluminum parts are anodized.
Layer 15 – 18 µ. Decorative surface but
non-conductive. If requested, please specify colour, e.g. colorless, black or anodized similar RAL color scale.
Alodyned (chromized)
A = yellow alodyned
W = white alodyned
Low priced surface protaction (corrosion
protaction). Good priming for varnishing
as well.
Technical information – drill hole-pattern
39
Drill hole-pattern
B…
drilling
SD 9 N
Sub D 9-pole
SD 9 U
B…/t… drilling (tapped blind hole)/depth
SD 15 N
M…
U…
metric threads
inch threads (UNC, UNF, UNEF)
Sub D 15-pole
SD 15 U
M…/t… metric threads (tapped blind hole)
U…/t… inch threads (tapped blind hole)
SD 25 N
Sub D 25-pole
SD 25 U
Af…
counter bore to DIN 74 Af...(90°)
SD 37 N
SD 37 U
Sub D 37-pole
Examples
B 4.2/t 12 Drilling Ø4,2 mm,
12 mm deep
B5
Drilling Ø 5mm
AF 5
Counter bore
DIN 74-Af 5
U 8-32
Threads UNC 8-32
M6/t 10
Thread M6,
10 mm deep
SD 50 N
Sub D 50-pole
SD 50 U
Dimensions in mm
40
Technical information
Drill hole-pattern
F 2-12,2
SMA 2-hole-flange
F 4-12,7
3/4"-Flange
F 4-18,2
standard 1”-flange
RD 1
round-miniature-connector
RD 2
RIB 24
micro ribbon 24-pole
RIB 36
micro ribbon 36-pole
RIB 50
micro ribbon 50-pole
Dimensions in mm
CNC-milling center
We produce precision milled components for electronic industry,
for aerospace industry and for optical industry with very high
requirements. We process alloys of light metal, non-ferrous
metals and synthetic materials. Of course we convert external
and internal data of construction to different machine controls
very fast via CAM technology (computer aided manufacturing,
NC-programming).
We offer you products with all technical producible surfaces
like chemical nickel, anodized etc.. We manufacture from prototypes up to production series according to your templates /
graph. On request we equip and mount your product completely. We provide an opportunity for 3D-measurements.
쮿 very modern centers for producing with
5-axis-CNC-technology
쮿 Complicated multi side processing
쮿 Certified to DIN ISO 9001:2000
쮿 3D-measurement with written protocol
쮿 3D-measurement accuracy ± 0,004 mm
쮿 3D-measurement axes 400 x 500 x 400 mm
ax-Nr.
F
o
t
r
e
Answ
Copy this page, fill it out and send it back to MTS Systemtechnik.
Please don´t forget your address!
쑽
Company
Name
1
66
0906 / 6
Dpt.
Street
Post code
Phone
Systemtechnik
Location
RF-systems and -units
Telefax
Data technology
E-Mail
About the selected products
Mechanical products
왏 send me detailed information
왏 send me an offer
Systems and units
왏 Signal distribution units
왏 Antenna distrib. units / multi couplers
왏 Combiners
왏 Remote controlled switching units
왏 Filter units
왏 Ventilation units
왏 Matrices
왏 Coupling units
왏 Air interface adapters
왏 Shielding boxes
왏 Coaxial short circuits
왏 Power attenuators and power terminations
왏 Signal dividers, power splitters,combiners and
multi couplers
왏 Programmable step attenuators
왏 Coaxial cable assemblies
왏 Bias tees
왏 Directional couplers
왏 Impedance matching modules
왏 PC controlled components
왏 Amplifiers
Components
왏 Coaxial relays
왏 Multi channel switches
왏 Videorelays
왏 Feedthrough terminations
왏 DC-blocks
왏 Fixed attenuators
왏 Terminations
Mechanical modules
왏 RF shielded enclosures
왏 Structural enclosures
왏 Custom specified enclosures
왏 Milled components
왏 Milled cassettes
왏 Cassette enclosures
왏 19"-racks
왏 call me
Data technology
왏 Controller cards and accessories for operators
in electronic
왏 Control units
왏 Custom specified interface units
왏 Development of firm- and software
Services
왏 CAD development and customerspecified
CNC milled modules
왏 Mounting of components to and testing of RF
printed circuit boards
왏 Engineering-service
왏 Programming-service
Distribution for
IMS Connector-Systems GmbH
왏 Coaxial connectors
왏 Terminations
왏 Coaxial adapters
왏 Coaxial cable assemblies
42
Systems and instruments
Systems and instruments
Signal distribution units for
쮿 Video signals
쮿 LF, HF, VHF, UHF
쮿 Data signals / control units
PC controlled signal switching units
쮿 With standard relays
쮿 Customer-specified (for measurement
usage)
쮿 With control software for windows
Matrices for
쮿 Audio signals
쮿 Video signals
쮿 LF, HF, VHF, UHF
쮿 Satellite communication
쮿 Microwave applications
Filter units
Coupling units
Air interface adapter
Shielding boxes
쮿 For testing GSM-modules within
defined environmental influences
쮿 Possibility of operating the test modules during the test with remote control
쮿 Aluminum cover (closed) and further
cover with shielded wire mesh to operate the test speciem manually (by
closed box)
s
Please send u
Your inquiry!
Overview of components
Components
Coaxial relays for RF-and video
applications
쮿 One-way and multi-way switches
DC-2000 MHz, in 50 or 75 ohm , BNC-,
SMA-,N-or other connectors
쮿 Low priced switches DC-1000 MHz,
with SMA connectors
쮿 RF-relays CD-1700 MHz, SP2T and SP4T,
with SMA connectors
쮿 RF-/video relays DC-1000 MHz,
50 or 75 ohm, with BNC connectors
쮿 Multi-way switches For RGB or RGBS
signals, DC-32 MHz, in 50 or 75 ohm
쮿 Coaxial relays modules with IEEE-488
or RS-232-C-interface
Controller cards and interface modules
Signal dividers and power splitters
Attenuators
쮿 programmable step attenuators
DC-2500 MHz, 0-63 dB, TTL, RS232,
RS485
쮿 programmable semiconductor
attenuators 200-4000 MHz, 0-93 dB
쮿 Manual adjustable step attenuators
쮿 fixed attenuators DC-18 GHz
Power amplifiers and small signal
amplifiers
Coaxial components in 50 or 75
쮿 Impedance matching modules
쮿 DC-blocks
쮿 Coaxial cable assemblies
Ventilation plug in modules
43
Systemtechnik
RF-systems and -units
Data technology
Mechanical products
Gewerbepark Ost 8
D-86690 Mertingen
Germany
Phone+49(0) 9 078/ 91294-0
Fax +49(0) 9 078/91294-70
[email protected]
www.mts-systemtechnik.de
Belgium
Michael Decamp S.A./N.V.
Rue de la Technologiestraat, 31
B-1082 Berchem-Ste-Agathe
Tel: +32 67-41-17-60
Fax: +32 67-41-17-61
Web: www.decamp.be
Germany
Telemeter Electronic GmbH
Joseph-Gänsler-Str. 10
D-86609 Donauwörth
Tel: +49-90 67 06 93-0
Fax: +49-90 67 06 93-50
Web: www.telemeter.info
England
Elion Electronics LTD
54 High Street
GB-Dormansland,
Surrey Engl. RH7 6PY
Tel: +44-13 42-83 79 69
Fax: +44-13 42-83 22 12
Web: www.elionelectronics.com
France
Pyrecap
5 Place Salvador Allendé
F-91124 Palaiseau Cédex
Tel: +33-1-69 20 44 25
Fax: +33-1-69 20 52 75
Web: www.pyrecap.com
Sweden
RF Partner AB
Taljegardsgatan 11 B
S-43153 Mölndal
Tel: +46-31 47 51 00
Fax: +46-31 47 51 21
Web: www.rfpartner.se
Italy
Support Logistic Services
Via Montenero 57/59
I-00012 Rome
Tel: +39-0774363634
Fax: +39-0774572838
Web: www.slsroma.it
Switzerland
Telemeter Electronic GmbH
Kirchstrasse 28
CH-8574 Lengwil-Oberhofen/TG
Tel: +41-716 699 06 2020
Fax: +41-716 699 06 2024
Web: www.telemeter.info
Austria
Krenn Hochfrequenztechnik GmbH
Simmeringer Hauptstr. 421
A-1110 Wien
Tel: +43-17 48 71 17-0
Fax: +43-17 48 71 17-90
Web: www.krenn.at
Spain
Sematron Espana S.L.
C/Alegria de Oria, 49-57
E-28027 Madrid
Tel: +34-91 741 23 00
Fax: +34-91 320 58 71
Web: www.sematron.es
Stand Mai 2005
International representatives