Tools - Cramo

Transcription

Tools - Cramo

TOOLS
Combining the latest
in Technology with our
experience and
business knowledge we
are able to support you
with practically
everything for your
Building Equipment
needs.
Klāvs Otisons, Product Area Manager
Tools MINI DUMPERS & GREEN CARE
MINI DUMPERS
Using a mini dumper, you can transport at least five times as much
as with a traditional wheelbarrow. The mini dumper is very suitable
together with a mini excavator, for example, and it can go almost anywhere, including through door openings. It can be used for everything
from normal building waste to sand and concrete.
RECOMMENDED
SAFETY EQUIPMENT
Explanation on page 5
Prod.no
1223340
Designation
Type
Dim. w x h x l
Dumper, 2-WD, <750 kg hydraulic tipping Motor cart Superskub 85 x 93 x 205 cm
www.cramo.com
Capacity
2400 l / 750 kg
Variations in product assortment may occur
Weight Engine Speed 295 kg Petrol 0-8 km/h
13
TOOLS Carts and wagons
carts, trolleys , wagons and trailers
Many transports at the construction site involve heavy lifts of bulky
products. In order to spare your back and transported material from
damage, we recommend that you use one of the carts or wagons from
Cramo’s extensive assortment.
We carry everything from special wagons, such as the gypsum wallboard cart and tool wagon, to a car trailer and 4-wheeled buggies.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Max load cap Max volume
Dimension
Weight
Comments
1512230 Fork-lift trolley, manual
2000 kg
75 kg
l=120cm, lifting height<15cm
1611130 Gypsum wallboard trolley
500 kg
202x120x20 cm
100 kg
For plaster 120 cm 1611130 Gypsum wallboard trolley
500 kg
201x70x87 cm
80 kg
For plaster 90 cm
1611240 Workshop wagon with lid
500 kg
400 litres
60x95c68 cm
75 kg
1612220 Workshop wagon, tandem
500 kg
450 litres
65x56x125 cm
42 kg
1612230 Tool trolley, with lock
500 kg
360-450 litres
65x89x120 cm
110 kg
Lockable 1621110 Transport trailer, 4-wheel, Mini 1000 kg
67x156 cm approx. 90 kg
Wagon-bridge
1621110 Transport trailer, 4-wheel, Midi1 500 kg
90x200 cm approx. 90 kg
Wagon-bridge
1621110 Open-sided wagon Bertil/Lyft 8
1500 kg
70x160 cm
Vertically adjustable
Wagon-bridge
1621330 Long loads trailer
2500 kg
108x216x54 cm
120 kg
Max expanded length 360 cm
1615110
1615120
1615232
1611660
14
Car trailer single axle
Trailer with ramp
Car trailer with cover top, Stair trolley, battery
<750 kg
<1000 kg 450 kg
<1000 kg 270 kg
300 kg
16 kg
www.cramo.com
Weight 2ton with ramp
Single axle
Max speed 35 steps/min
tools Concrete equipment
concrete Mixers
Concrete mixers are suitable for mixing smaller quantities of concrete.
Cramo has both 1-phase and 3-phase mixers.
Tip: For a concrete mixer to provide the same good results each time,
it is important to clean the drum with small stones and water between
each new mixture.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
Designation
Max volume
Weight
Dimensions
Comments
3411110
Concrete mixer, 1-phase
130 litres
55 kg
65x125x125 cm
Mixing of concrete/mortar
3411120
150 litres
60 kg
70x130x145 cm
3411130
190 litres
90 kg
75x140x155 cm
3512010
Concrete/Mortar mixer, SoRoTo 80
80 litres
65 kg
60x106x75 cm
Mixing of concrete/mortar/plaster
Rapid-action, 1-phase
3512020
Concrete / Mortar mixer, SoRoTo 100/120 100/120 litres 75/90 kg
72x118x95 cm
Mixing of concrete/mortar/plaster
Rapid-action, 1-phase
3512030
Concrete / Mortar mixer, SoRoTo 300
300 litres
249 kg
100x137x120 cm Mixing of concrete/mortar/plaster
Rapid-action, 3-phase mortar mixers
Mortar and plaster must be mixed correctly to achieve satisfactory
results.
Cramo has many suitable machines for rational production and
handling of mortar and plaster. To prevent the mixture from being
contaminated and thus becoming more difficult to work with, it is
important to clean the mixing drum frequently.
RECOMMENDED
SAFETY EQUIPMENT
Explanation on page 5.
Prod.no
3511220
3511250
3511330
Designation
Plaster/mortar mixer, 1-phase
Plaster/mortar mixer, 1-phase
Concrete mixer, handheld, Baier 2842
www.cramo.com
Max volume
<20 litres
75 litres
-
Weight
Dimensions
Comments
33 kg
35x60x40 cm
Mixing of platser
25 kg
68x104x120 cm
Mixing of plaster
10 kg
Hand-held whisk, cement water agitator
15
TOOLS Tanks
adr tanks and dump containers
At Cramo you can rent different kinds of tanks for transport or storage
of fuels, for example.
For speeds greater than 30 km/h, an ADR cistern is required. Cramo
is now also offering ADR tanks equipped with a rain protectors and
environmental boxes. These must be used where local regulations
require extra external protection (a so-called retaining dike) when
handling diesel.
ACCESSORIES
Pump for tank
(electric or manual)
Absorbation kit
RECOMMENDED
SAFETY EQUIPMENT
Explanation on page5
Prod.no
3881001
3881002
3875242
3875442
3875252
3875452
3875262
3875462
16
Designation
Drum with enivormental walls for 2 drums
Drum with enivormental walls for 4 drums
ADR-tank <1000L
ADR-tank with enviromental box <1000L
ADR-tank <1500L
ADR-tank <2000L
www.cramo.com
Volume
230 litres
270 litres
1000 litres
1000 litres
1500 litres
1500 litres
2000 litres
2000 litres
Weight
Comments
16 kg
120x150x44 cm
18 kg
130x150x44 cm
350 kg
400 kg
Spillage-free environmental container
500 kg
780 kg
660 kg
920 kg
tools CompACtion
light compaction
The rammers are suitable for
compacting soil in trenches,
around poles and in restricted
spaces. They comply with contractors’ highest demands in
terms of efficiency, simplicity and
operators comfort. Cramo can
offer the best possible solutions
for your tamping needs.
RECOMMENDED
SAFETY EQUIPMENT
tamping rammers
Prod.no
4461230
4461230
Type
Dynapac LT6004 or equivalent
Wacker BS60-4 or equivalent
Weight
68 kg
63 kg
Base plate
25x33 cm
28x32 cm
Fuel
Petrol
Petrol
Outer dimensions
40x106x77 cm
34x96x67 cm
Comments
High depth compaction capacity
High depth compaction capacity
round plates
Prod.no
4463280
4463280
Type
Dynapac LX90 or equivalent
Swepac FR85 or equivalent
Weight
90 kg
88 kg
Base plate
Ø45 cm
Ø43 cm
Fuel Outer dimensions
Comments
Petrol
45x92 cm Sand/gravel/macadam for cramped spaces
Petrol
43x98 cm Sand/gravel/macadam for cramped spaces
vibraTORY PLATES
Effective compaction of soil and asphalt material makes great demands
on the correct equipment for each specific job. Cramo offers a wide
range of quality products designed for every need.
Please talk to our skilled personnel about which machine that best
suits your situation.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
4463200
4463200
4463210
4463215
4463215
4463220
Type
Dynapac LF50 or equivalent
Wacker VP1030A or equivalent
Dynapac LF80A or equivalent
Wacker WP 1550AW or equivalent
Dynapac LF100 or equivalent
Dynapac LF130 or equivalent Weight
52 kg
50 kg
78 kg
85 kg
95 kg
135 kg
www.cramo.com
Base plate
32x50 cm
30x50 cm
42x57 cm 50x59 cm
50x60 cm
50x58 cm
Fuel
Petrol
Petrol
Petrol
Petrol
Petrol
Petrol
Outer dimensions
Comments
32x95x101 cm
Sand/gravel/ground/stone
30x75x90 cm
Sand/gravel/ground/stone
42x103x112 cm Sand/gravel/ground/stone/macadam/asphalt
50x99x64 cm
Sand/gravel/ground/stone/macadam/asphalt
50x103x112 cm Sand/gravel/ground/stone/macadam/asphalt
50x102x112 cm
Sand/gravel/ground/stone/macadam
17
TOOLS compaction
reversing vibratory plates
Effective compaction of soil and asphalt material makes great demands
on the correct equipment for each specific job. Cramo offers a wide
range of quality products designed for every need.
Please talk to our skilled personnel about which machine that best
suits your situation.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
4463420
4463420
4463430
4463435
4463435
4463445
4463445
4463445
4463445
4463451
4463451
4465350
Type
Dynapac LG160 or equivalent Wacker DPU 2540H or equivalent
Dynapac LG200 or equivalent Dynapac LG300 or equivalent Wacker DPU4045H or equivalent Dynapac LG400 or equivalent Dynapac LG500 or equivalent Wacker DPU 5045H
Wacker DPU 6055
Dynapac LH700 or equivalent Wacker DPU 100-70 or equiv
Dynapac LH800 remote controlled
Weight
155 kg
140 kg
247 kg
302 kg
330 kg
436 kg
522 kg
402 kg
478 kg
780 kg
756 kg
820 kg
Base plate
33x66 cm
40x70 cm
50x70 cm
50x77 cm
46x90 cm
65x98 cm
85x99 cm
46x72 cm
56x90 cm
66x105 cm
70x107 cm
66x105 cm
Fuel
Petrol
Diesel
Diesel
Diesel
Diesel
Diesel
Diesel
Diesel
Diesel
Diesel
Diesel
Diesel
Outer dimensions
33x115x109 cm
47x76x129 cm
50x132x106 cm
50x139x112 cm
68x114x150 cm
65x120x155 cm
85x166x134 cm
68x114x150 cm
80x117x150 cm
66x188x110 cm
105x140x165 cm
66x115x80 cm
Comments
Sand/gravel/macadam
Sand/gravel/macadam
Sand/gravel/macadam
Sand/gravel/macadam
Sand/gravel/macadam
Electric start. Sand/gravel/macadam/stone
GUIDE TO THE RIGHT VIBRATORY PLATE
In Construction AMA98, the vibrating plate compactors are divided into
weight classes and the specified compaction depth in the table applies
to completely packed material. This implies that the layer thickness of
the uncompacted material is 25% greater than the specified compaction
depth.
Construction AMA98 stipulates at least 6 passes. A greater number of
traverses does not mean that you cannot increase the layer thickness,
but can sometimes imply an added level of safety when there are higher
requirements for the compaction results.
Tamper
50-70 kg
Soil- and asphalt Round
plates
vibrators
90 kg
45-100 kg
Soil
Forward/reverse
vibrators
vibrators
150 kg
150-250 kg
Forward/reverse
vibrators
300 kg
Forward/reverse Forward/reverse
vibrators
vibrators
500 kg
over 600 kg
0
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
Depth, m
18
Stone
Sand/Gravel
Clay
www.cramo.com
tools concrete treatment
poker vibrators
For general concrete work, foundations, concrete walls the concrete
has to be vibrated in order to obtain maximal strength and stability.
Poker vibrator compacts and vibrates away air from the concrete.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
4712220 Including motor, 1-phase. Tremix Minivib 3 4711632 1-phase, with built-in transformer 4711633 1-phase, with built-in transformer Wall poker vibrators shorter than 7 m
4711531 1-phase, with built-in transformer 4711532 1-phase, with built-in transformer 4711533 1-phase, with built-in transformer Wall poker vibrators longer than 7 m
4711541 1-phase with built-in transformer 4711542 1-phase with built-in transformer 4711543 1-phase, with built-in transformer 4711544 1-phase, with built-in transformer Diameter
36 mm 45 mm 58 mm Length
160 cm 90 cm 90 cm Weight
7.1 kg 13 kg 15 kg Comment
For thin and lightly reinforced structures
For all types of vault structures
For all types of vault structures
38 mm 45 mm 57 mm -7 m -7 m -7 m 12 kg 15 kg 20 kg For walls and column structures
For walls and column structures
38 mm 45 mm 57 mm 57 mm 7- m 7- m 7- m 12.5 m 12 kg 15 kg 20 kg 21 kg For walls and column structures
vibraTORY beams
Good casting results are dependent on the right equipment and its
quality. Our machines for concrete treatment consist of a wide range of
vibrators for casting of floor, wall and heavy concrete structures. Vibrator beams with varying lengths and effective concrete smoothing machines mean that we have a complete product programme for
concrete treatment work.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
4722220
4722310
4722320
4722330
4722340
4718630
4718235
Designation
Vibrator beam, single. Tremix R20/21
Vibrator beam, double. Dynapac BR61/62
Vibrator beam, double. Dynapac BR68
Vibrator beam for finishing, single, petrol. Tremix BFP
Vibrator beam for finishing, single, electric. Tremix BFE
www.cramo.com
Length
<4.25 m <4.50 m
<6.25 m
<8.25 m
10.50 m
1.5-2.0 m
1.5-2.0 m
Weight
<15 kg
<100 kg
<118 kg
<174 kg
212 kg
<12 kg
<12 kg
Power source
1-phase
3-phase
3-phase
3-phase
3-phase
Petrol
1-phase
19
TOOLS concrete treatment
power trowels
Trowels are designated for green concrete surface treatment.
They come in versions of electric and petrol power. For concrete
surfacing time is very essential, therefore, for larger working areas we
offer Ride-on power trowels that will save you time and make it much
easier to complete the work in time.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
4731130
4731140
4731150
4731230
4731240
4732230
20
Designation
Power trowel, electirc. Dynapac BG21E
Power trowel, electric. Dynapac BG33E
Power trowel, electric. Dynapac BG42
Power trowel. Dynapac BG21GF
Power trowel. Dynapac BG39GL
Ride-on power trowel. Dynapac BG70
www.cramo.com
Diameter
60 cm
83 cm
102 cm
60 cm
89 cm
1.78 cm
Weight
58 kg
77 kg
88 kg
74 kg
88 kg
370 kg
Power source
1-phase
3-phase
3-phase
Petrol
Petrol
Petrol
tools temporary electricity
generators
The generator unit is used in places where there is no permanent,
operable electric power network. It can be used for construction work,
outdoor events, for supply to computer installations during repair work
and other temporary interruptions to the electricity supply.
We have a wide range of generators with effects from 1-300 kVA and we
would be happy to help you in dimensioning the right generator capacity
to meet your needs.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Cont effect Weight Operating time
Outer dimensions
Comments
1-phase generators
5211010 Petrol <1,0 kVA, Honda EU10i or equiv
0.9 kVA
13 kg
approx. 4 hours 24x38x45 cm For smaller tools/lighting, sound
proofed
5211015 Petrol <1,7 kVA, Honda EU20i or equiv
1.6 kVA
21 kg
approx. 4 hours 29x42x51 cm For smaller tools/lighting, sound
proofed
5211020 Petrol <2,5 kVA, Honda EC2200 or equiv
1.7 kVA
36 kg
approx. 2.8 hours 44x44x58 cm
For smaller tools and lighting
5211025 Petrol <3,0 kVA, Honda ECM2800 or equiv 2.5 kVA
50 kg
approx. 9 hours 44x49x65 cm
5213010 Diesel <7,0 kVA, Yanmar YDG 3700 or equiv 4.6 kVA
72 kg
approx. 10 hours 70x77x100 cm
3-phase generators
5211030 Petrol <7,0 kVA, Honda RCT 6500 6.5 kVA 100 kg approx. 8 hours 55x56x75 cm
Terminal 1x1-phase 16A
5211030 Petrol <7,0 kVA, Honda ECMT 7000
6.5 kVA 100 kg approx. 8 hours 55x56x75 cm
Terminal 1x1-phase 16A,
2x1-phase 10A, 1x3-phase 16A
5213011 Diesel <7,0 kVA, Yanmar PD7
6.2 kVA
110 kg approx. 7 hours 58x61x82 cm
Terminal 2x1-phase 10A,
1x3-phase 16A
lighting towers
Facts about Keram metal-halogen lamps
- True colour reproduction
- Uses only 10% energy in comparison to
tradional halogen lamps
- Better economy
- Better for the environment (environmental
friendly)
Prod.no
5261110
5261115
5261140
5261230
5261270
5261443 5281110
1699980
1699983
Designation
Capacity
Comments
Lighting tower <5m
0–5 m
2 x 500 W halogen
Lighting tower <5m
0–5 m
2 x 100 W metal halogen
Lighting tower <10m
Lighting tower <13m
0-12 m
3 x 1500 W halogen, wheel chassis
Lighting tower <13m, reactor cabinet
0-12 m
3 x 400 W high-pressure sodium with wheel chassis, low energy consumption
Lighting tower, 3x150W, without generator Cable-carrying pylon
Drum trailer/cable trailer
Drum trailer/cable trailer, car inspection
5291210
Mobile stringing gun, EAZYGUN EZ50
www.cramo.com
Weight 4.1 kg
220V, possible to eject the wire up to 100 m
21
TOOLS temporary electricity
transformers
In conjunction with the start of construction, we can supplement
services with regard to the planning, dimensioning and installation of
temporary construction electricity. Our undertaking can even comprise
contacts with energy authorities.
For the electricity supply during an industrial stoppage or at temporary
facilities, as well as for construction and site preparation work, we can
offer a complete range of main control units and substations.
Naturally, all stations that are available Cramo are provided with earth
fault breakers to increase your safety.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
5223100
5223110
5223130
Designation
Lighting transformer Lighting transformer Lighting transformer Diameter
230/48V
230/48V
400/48V
Comments
1 group
3 groups
9 groups
main electrical stations
Prod.no
5251011
5251021
5251031
5251041
5251051
5251061
5251071
22
Designation
Main station Main station Main station Main station Main station Main station Main station Capacity
25/32 A
63 A
100 A
160 A
250 A
400 A
630 A
www.cramo.com
tools temporary electricity
Electrical substations
In conjunction with the start of construction, we can supplement
services with regard to the planning, dimensioning and installation of
temporary construction electricity. Our undertaking can even comprise
contacts with energy authorities.
For the electricity supply during an industrial stoppage or at temporary
facilities, as well as for construction and site preparation work, we can
offer a complete range of main control units and substations. Naturally,
all stations that Cramo rents are provided with earth fault breakers to
increase your safety.
ACCESSORIES
Cable, rubber 10-125A
Cable winder 10-32A
Over-run protection for
electric cable
Multiway socket 10-32A
Headlight spherical
Prod.no
5252111
5252121
5252131
5252211
5252221
5252320
Headlight Halogen500/1500W
Buoy on stand 48-230V
Lighting loop excl. lamps/m
Underground line AKKJ
Phase changer
Emergency light buoy with battery
backup
Designation
Substation with cabinet
Substation/floor station Substation/floor station Automatic lighting electrical unit
Capacity
25/32 A
63 A
100 A
16 A
25/32 A
16 A
temporary electricity
Safe power supply
Reliable and safe electricity
supply is important for being able
to run a construction project as
smoothly as possible. We map
the project’s requirements for
construction manpower from
start to finish and assist you with
calculations, dimensioning and
delivery carried out by authorised
electricians.
Our services can comprise the
following:
- Pre-notification and final
notification to utility companies
- An authorised electrical
contractor appointed by Cramo - Supply and return transport as well as connection of suitable distribution boxes and circuitry etc. - Dimensioning of cables, size of
fuses and conditions for
tripping
- Planning of routes and location
- Documentation and results of calculations.
Note. The distribution boxes are
equipped with earth fault
breakers.
www.cramo.com
23
TOOLS compressed air
electric compressors
Compressors are effective and reliable sources of power for air-driven
machines and tools. Cramo offers small electrically powered compressors for nail and staple guns.
Get in touch and we will be happy to help you select the right compressor for your needs.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
45311220
5311230
5311250
5317220
5384720
24
Type
Senco Procomp 190/3 or equivalent Senco Procomp 304/19 or equivalent Kaeser Premium car 660/70D or equiv
MAX AKHL 1050 High pressure
High pressure hose HT130 Weight
Base plate Fuel
Outer dimensions
Comments
<150 l/min 1-phase
20 kg
30x48x45 cm For powering brads/stapling tools
<250 l/min 1-phase
50 kg
45x60x55 cm For powering all types of nail tools
<700 l/min 3-phase
118 kg
70x63x106 cm
29 bar
1-phase
25 kg
35x28x60 cm
30 bar
Length 25 m
www.cramo.com
tools heating and ventilation
diesel heaters
A diesel powered heater is a very effective way to heat up buildings due
to its high degree of energy efficiency and air flow. These units are very
suitable for heating up large buildings or areas. They are very easy to
use and demand little degree of service and maintenance. Diesel fuel
can be stored separately in ADR tank which can be rented from Cramo
as well.
To calculate the correct heater for your needs, contact your Cramo
depot.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
Designation
Max burner
5611020 Portable heater, dies, D30 or equiv <35 kW 5611030 Portable heater, dies, D55 or equiv <55 kW 5611040 Portable heater, dies, D70 or equiv <75 kW 5611060 Portable heater, dies, D110 or equiv <115 kW 5611070 Portable heater, dies, D130 or equiv <120 kW 5611120 Building dryer, dies, <200 kW Polartherm Heatmobil HTL250 or equiv
5611220 Heat container, diesel, <375 kW Polar HC372 or equivalent
Cap kJoule
input
108 000 198 000 252 000 396 000 432 000 702 000 Max fuel
per hour
2,9 l/h 5.8 l/h 7.0 l/h 11 l/h 12.0 l/h 18 kg/h 1 339 000 36 kg/h Air quantity Fan
Weight
Dimension
consump
pressure
l x w x h
2800 m³/h 60 Pa 92 kg 1270x550x880mm
3000 m³/h 60 Pa 160 kg 1500x660x1100 mm 4400 m³/h 200 Pa 179 kg 1620x670x1120 mm
5500 m³/h 60 Pa 177 kg 1660x670x1110 mm 7000 m³/h 250 Pa 246 kg1880x855x1300 mm
13 350 m³/h 450 Pa 1100 kg3000x800x1380 mm
18 000 m³/h 600 Pa 4000 kg6100x2435x2730 mm
LP-GAS HEATER/DRYERS Gas heaters are flexible solution which offers a high heating effect. The
heaters can be placed where the demand and supply of fuelFacts
is done
via Keram metal-halogen lamps
About
a hose.
Gas heaters have a high degree of energy and is a very effective
heating
- Uses
only 10% energy in comparison to
solution.
- Better economy
- Better for the environment
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Max
Cap
heating effect kJoule
5612020 <35kW, PGM30 or equivalent 26 kW
93.6
5612040 <75kW, PGM60 or equivalent 55 kW
198
5612060 <115kW, PGT100 or equivalent 102 kW
367.2
5612130 Indirect <55kW, K55 or equivalent 55 kW
198
5612150 Indirect <130kW, Jumbo 115 or equivalent 133 kW
478.8
5612170 Indirect >130kW, HTL250 or equivalent 220 kW
792
www.cramo.com
Fuel
Air quantity
Weight
consumption
0.8-2 kg/h
800 m³/h
12 kg
2-4.3 kg/h
1450 m³/h
20 kg
1-8 kg/h
1140 m³/h
27 kg
4.5 kg/h
3000 m³/h
152 kg
0-11kg/h 8000 m3/h 200 kg 0-18kg/h
13860 m3/h
505 kg
Dimensions
wx h x l
26x41x45 cm
32x51x65 cm
49x53x94 cm
62x103x168 cm
83x121x217 cm
80x137x240 cm
25
TOOLS heating and ventilation
hot water heater
A hot water unit is a flexible heating system in which the supply to the
heater goes via a water hose. The system requires access to hot water,
which can be supplied either via an existing district heating system or
a mobile oil furnace with a substation. Heating with hot water often
provides low heating costs
Prod.no
Deignation
Max heating effect* Capacity kJoule
5651120
<20 kW, TF15HV
17.5 kW
63
5651130
<35 kW, TF30HV-F
30 kW
97.2
5651140
<60 kW, TF50HV-F
50 kW
-
*) The effect is dependant on incoming water temperature.
Air quantity
1040 m3/h
2000 m3/h
3900 m3/h
Weight
31 kg
77 kg
138 kg
Dimensions
36x55x74 cm
66x67x121(215)cm
94x67x121(215)cm
electric heaters
Electricity is a maintenance-free method of
heating. It requires no fitting. The electric heaters are easy to place where there is a heating
need, facilitating the heating of individual rooms
and areas. Heating with electricity does not
involve any discharge or disruptive noise.
Prod.no Designation
Max
5653210 Warm air fan, 220V
<3 kW
<6 kW
<10 kW
<15 kW
<25 kW
5653350 Hot-air fan, electric, TF18EL
4.5-18 kW
with batteries and air distributor
26
www.cramo.com
Cap
Electricity
heating effect
7.200
1-phase, 220V, 10A
21.600
3-phase, 380V, 16A
32.400
3-phase, 380V, 16A
54.000
3-phase, 380V, 32A
108.000
3-phase, 380V, 63A
64.800
2x3-phase, 380V, 16A
Air quantity
Weight
kJoule
250 m³/h
6 kg
400 m³/h
8 kg
750 m³/h
12 kg
1200 m³/h
16 kg
2600 m³/h
30 kg
2300 m³/h
70 kg
Dimensions
wx h x l
25x30x30 cm
31x37x36 cm
35x40x39 cm
38x45x40 cm
63x58x59 cm
53x126x66 cm
tools heating and ventilation
thawing of frozen soil
The climate in the Nordic Region is variable, with large fluctuations in
temperature and precipitation between the seasons. At Cramo, there
is always the right equipment for handling temperature problems,
whether it has to do with heating systems, electric heating fans, thawing equipment for frozen ground or dehumidification and refrigeration
plants.
Prod.no Designation
Dimensions w x l (x h) Electricity
Effect
Weight
5542230 Floor heating, adjustable heat 0-50 degrees, number of speeds 3
17x62x60 cm
400 V / 16 A 9 kW
19 kg
5621030 Ground thawing equipment, diesel, <130 kW, Weelu T90/T100
158x77x69 cm
1-phase
130 kW
85 kg
5623430 Heating carpet for ground thawing 3,5m2, 230V
1x3 m
1-phase
0.9 kW
11 kg
5623435 Heating carpet for ground thawing 3,5m2, 230V
1x3 m
1-phase
1.1 kW
11 kg
5623440 Heating carpet for ground thawing >3,5m2, 230V
1x4 m
1-phase
1.5 kW
14 kg
5621730 Ground thawing equipment, diesel, Wacker E700M, trailer mounted
-
119 kW*
1750 kg
5621730 Ground thawing equipment, diesel, HeatWork HDW 700, trailer mounted -
119 kW*
1750 kg
*) Thawing capacity: Max 420 sq m effectice area and 30-40 cm depth/day.
Facts About Keram metal-halogen lamps
- Uses only 10% energy in comparison to
- Better economy
- Better for the environment
www.cramo.com
27
TOOLS drying and heating
Different heating systems - what suits my needs?
There are now four different energy sources on the market for temporary heating within the construction and industrial sector. Each energy
source has different advantages and disadvantages. By having a correctly
dimensioned heating system installed during construction, considerable
work, time and money can be saved. Cramo offers a comprehensive
range of heating equipment for all four of the energy sources. The four
different heating categories are:
•
•
•
•
LP gas
lectricity (electric heating fans, 2-30 kW)
E
Hot water (hot water units, 27-55 kW)
LP gas (direct- and indirect-acting building dryers, 26-100 kW)
Diesel oil (indirect-acting building dryers, 35-200 kW)
electric heating
Advantages
Advantages
LP gas provides a flexible solution with high effect. LP gas heaters can be
placed where there is a need for heating, since supply is via a hose and
there are no exhaust emissions that are hazardous to health. The high
energy content in LP gas provides very effective heating.
Disadvantages
Larger heating systems with LP gas require an LP gas rack that is approved
by the authorities. Cramo will gladly help you in gaining approval.
Diesel oil
Electricity is a maintenance-free method of heating. It requires no
maintenance or fitting. The electric heaters are easy to place where
there is a heating need, facilitating the heating of individual rooms
and areas. Heating with electricity does not involve any discharge or
disruptive noise.
Disadvantages
Heating with electricity requires a correctly dimensioned electrical
installation. If the electrical installation does not have sufficient capacity, it will affect other production on the construction site. There are
limitations to the size of an electrical unit. For this reason, heating of
large premises is not as suitable.
Hot air fan heating
Infrared heating
Advantages
Hot water
Advantages
A hot water unit is a flexible heating system in which the supply to the
heater goes via a water hose. The system requires access to hot water,
which can be supplied either via an existing district heating system or
a mobile oil furnace with a substation. Heating with hot water often
provides low heating costs.
Disadvantages
The high energy content in diesel oil provides very effective heating. Oil heating can heat very large premises. It is a relatively easy and maintenancefree system which only requires the filling of diesel. Diesel can be stored
in drums or in ADR tanks, which also can be rented from Cramo.
Disadvantages
Oil heaters must be placed either outdoors or indoors where the exhaust
gases can be discharged.
Requires hot water, which is not always available.
How do I dimension my heating system?
Example
The formula below can be used to roughly dimension the heating
equipment:
Volume to be heated x Insulation factor x Desired temperature
rise x 4.18 = The need of the number of kJ supplied per hour (kJ
= kilo Joule)
Insulation factors
Well insulated = 1.2
Average insulation = 2.2
Poorly insulated = 3.0
Non-existent insulation = 4.0
28
www.cramo.com
I want to heat premises with a temperature of 5° C to 20° C; the dimensions are 20 m x 10 m x 4 m. The premises have not been insulated yet, but
curtain walls and windows have been installed (poorly insulated = 3.0).
This gives us:
20 x 10 x 4 = 800 m³ x 3.0 x (20° C-5° C) 15° C x 4.18 = 150.480 kJ
Then choose (a) product(s) according to Capacity kJ (see page 18). In this
example, it provides us with the following suitable machine option:
1 (x) 55 kW Diesel heater (198,000 kJ), or LP gas heater PRT50 (198,000
kJ), or hot water unit HWH 48 (198,000 kJ), or 5 (x) 9kW electric fans.
tools drying and ventilation
dehumidification
Dehumidifier is a type of drying equipment. To dehumidify is an efficient
method compared to warming up and ventilating moist and heat. A
dehumidifier converts most of the energy back as heat, the same air is
re-circulated.
The method is efficient, easy to control and suitable for temperatures
above 15° C. Below 15°C we suggest sorption dehumidifiers.
Dehumidification is very important for a long life time of the buildings.
The humidity can cause considerable damages, therefore use of dehumidifiers are more than recommended both during construction and
renovating as well as taking care of flooding and high humidity effects.
Prod.no
Designation
Capacity
Work range
5632220
Dehumidifier, 230V, <20l/24h, A60 BT or equivalent
16l / 24 hours +8 - +35 °C
5632230
27l / 24 hours +8 - +35 °C
5632250
67l / 24 hours +8 - +35 °C
5632320
Dehumidifier with heating, LAF 50EI or equivalent
32l / 24 hours
5632520
Sorption dehumidifier <15l/24h, Munters M13Y
11l / 24 hours
5632540
Sorption dehumidifier <30l/24h, Munters MCS300, MH270 30 l /24 hours
Effect
Weight Dimensions 640 W
26 kg 35x59x40 cm
775 W
42 kg
1560 W
49 kg 63x98x53 cm
1800 W
40 kg 59x64x42 cm
150 m³/h
13 kg 25x36x43 cm
300 m³/h,1900 W22 kg 35x32x63 cm
ventilation Clean, fresh air is an important part of a healthy work environment.
Cramo offers effective fresh-air fans that provide a comfortable working
environment. We also provide efficient evacuation fans for the speedy
evacuation of air with capacities from 100 m3/hour and upwards.
ACCESSORIES
Ventilation hose 83-406 mm
Sleeve coupling Renair AB600,1500
Prod.no
5861120
5850000
5845540
Designation
Air quantity
Fresh air fan, 100 mm
Air conditioning. Oskar Twin/Oskar 8 or equivalent
Fresh air fan VAF 3000
2800 m3/h
www.cramo.com
29
TOOLS pumps
pumps
For different types of work, problems often occur with inflow of water
that delay or prevent work, resulting in increased costs.
Our extensive pump assortment, consisting of diaphragm, and submersible pumps with capacities from 300 to 12000 l/min, are excellent
for all types of pump jobs, for continuous operation or specific tasks.
Prod.no
Designation
Diaphragm pumps
6413340
Wacker DP13A or equivalent
Sludge pumps
6427220
Grindex Salvador
6427221
Grindex Sandy
6427230
Grindex Senior
Max flow
Power
Capacity
330 l/min
Petrol
7.5 m pump height
600 l/min
870 l/min
2070 l/min
El, 1-phase 20 m sumersion
El, 3-phase 20 m submersion
El 3-phase 20 m submersion
Weight
Dimensions
63 kg
45x61x100 cm
34 kg
57 kg
57 kg
38x76 cm
49x88 cm
49x78 cm
pump guide
Pump height (m)
50
Pump height (m)
90
40
30
MAJOR N
MAJOR H
80
MAXI N
MAXI H
MINOR N
MINOR H
70
MATADOR N
MATADOR H
MINETTE 1-fas
MINETTE 3-fas
60
MIDI N
MIDI H
MINEX 1-fas
MINEX 3-fas
50
MASTER N
MASTER H
40
20
30
20
10
10
0
30
0
300
600
900
1200 1500 1800 2100 2400
Flow (l/min)
www.cramo.com
0
0
2000
4000
6000
10000
8000
Flow (l/min)
tools pumps
centrifugal pumps
Cramo has a wide pump range from small light-weight pumps that are
easy to carry and use, to large drainage pumps weighing up to 300 kg.
The pumps are used in a variety of applications such as draining building sites and in case of flooding.
ACCESSORIES
Pump hose 1 1/2-6”
Pump hose suction
Connector pipe
Note. Charges for this
product group are debited per calendar day.
Prod.no
Designation
Max flow
Power
Max pump height
Weight
Petrol
6423320
2”, Honda WB20XT or equivalent 600 l/min
Petrol
32 m
21 kg
6423330
3”, Honda WB30XT or equivalent 1200 l/min
Petrol
28 m
27 kg
Electric
6424220
Grindex Tuff one
360 l/min
1-phase
16 m
14 kg
6424220
Grindex Minex
566 l/min
1-phase
15 m
17 kg
6424230
Grindex Minette
900 l/min
1 or 3-phase 18 m
25 kg
6424240
Grindex Minor
1900 l/min (N*) / 780 l/min (H*) 3-phase
37 m (N)* / 24 m (H*) 39 kg
6424250
Grindex Major
27 m (N*) / 45 m (H*) 50 kg
6424260
Grindex Master
28 m (N*) / 70 m (H*) 60 kg
6424260
Grindex Midi
33 m (N*) / 63 m (H*) 120 kg
6424270
Grindex Matador 6000 l/min (N*) / 3300 l/min (H*) 3-phase
45 m (N*) / 60 m (H*) 160 kg
6424280
Grindex Maxi
47 m (N*) / 90 m (H*) 285 kg
*) N=normal pressure, H=high pressure design.
www.cramo.com
Dimensions
35x36x47 cm
37x45x50 cm
Ø24x52 cm
Ø24x52 cm
Ø29x54 cm
Ø33x65 cm
Ø33x72 cm
Ø33x65 cm
Ø53x82 cm
Ø53x94 cm
Ø51x135 cm
31
TOOLS material lifting equipment
concrete skip
Tippable baskets for transportation of concrete at any building site.
RECOMMENDED
SAFETY EQUIPMENT
Explanation on page5.
Prod.no
7524220
7524230
7524240
7524260
7524320
7524330
7524340
7524360
Designation
Concrete ballast/filler
Volume
<500 l
<750 l
<1000 l
<3000 l <500 l
<750 l
<1000 l
<3000 l Comments
For arch
For arch
For arch
For arch
For wall
For wall
For wall
For wall
material handling equipment
Cramo’s extensive assortment includes concrete skips, waste boxes,
brick and transport baskets adapted for effective use by the crane at the
work site.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
7525330
7525340
7523340
7532240
7521220
Designation
Waste box self tilting to cranes <1000l
Waste box self tilting to cranes <2000 l Materials bucket, self tilting w BM coupl
Brick or light concrete fork Tilt container
Capacity <2000 kg
<2500 kg
<4000 l
2500 kg
<600 l
conveyor belt
Reconstruction of properties often involves the need to handle and
transport large quantities of materials from such places as cellars and
other cramped spaces.
Cramo can offer a flexible conveyor belt system consisting of short
conveyor belts that are built together.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
57436220 Belt conveyor, 1-phase, Soroto
32
www.cramo.com
Length
3,5 m
Width
40-60 cm
Weight
60 kg
tools material lifting equipment
Material conveyors
Our material conveyors make work with roof-laying or the replacement of roofing tiles significantly easier. The
conveyors can be towed by standard cars.
Reconstruction of properties often involves the need to handle and transport large quantities of materials
from such places as cellars and other cramped spaces.
Cramo can offer a flexible conveyor belt system consisting of short conveyor belts that are built together.
ACCESSORIES
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
7439230
7439330
Shoot
Combilift elbow
Tipping bucket, etc.
Designation
Ladder lift, inclined Geda 200
Ladder lift, inclined Geda Comfort
Load capacity
200 kg
200 kg
Lifting height
19 m
14 m
scaffolding cranes
When lifting or pulling objects into place, hoist gear or winches and pneumatic reeling machines are unbeatable in helping to get the job done. Cramo’s assortment includes a wide variety of hoist gear and winches.
We also have a complete line of scaffold cranes and winches especially designed for lifting materials to
different levels on the scaffold, safely and effectively.
ACCESSORIES
Crane arm for electric winch
Pulley wheel
Prod.no
7553430
7553330
Designation
Geda Mini, 230V
Geda Maxi 150S, 230V
Lifting cap
75 kg single, 150 kg double cable
150 kg single, 300 kg double cable
Weight
28 kg
35 kg
Lifting height
50/25 m
50/25 m
gypsum board hoist
Using a small hoist helps mounting plaster board in a very quick and
efficient way. Cramo offers both manual and electric hoists that can
reach as high as 4.6 meters.
Prod.no
7563220
7563250
7562630
Designation
Plaster board lift for ceiling
Plaster board lift for ceiling/wall, Starke Arvid
Plaster board lift, 230V, OBM Elin
www.cramo.com
Lifting height
< 4m
4.6 m
3.9 m
Weight
< 40 kg
54 kg
65 kg
Max Lifting weight
< 70 kg
100 kg/50 w extension
50 kg
33
TOOLS crane equipment
lifting aid
It is always important to work correctly without unnecessary lifting or
strenuous working postures. At Cramo, you will find various lifting aids
adapted for many different strenuous tasks. For example, we offer window lifts, gypsum woodboard lifts and doorcase carrier lifts.
ACCESSORIES
Collapsible gypsum trestle
Stepladder 3-14 steps
Work trestle 2-4 steps
Step ladder 5 steps tool shelf
Prod.no
7534930
7564210
7564240
7564280
7564290
7562230
Designation
Glass lifter, vacuum
Material hoist, manuel winsch
Door lift, Sune
Lifting height
2.5 m
<4m
<4m, with two extensions
<6m
<8m
-
Ladder aluminium 3-5 m
Ladder, aluminium extendable 4-10 m
Craftsman scaffold, 2 m
Weight
410 kg
35 kg
95 kg
161 kg
182 kg
150 kg
Max lifting capacity
250 kg
<150 kg
<250 kg
<300 kg
<300 kg
150x900 cm
jacks, pulleys and telphers
There is often a need to lift or move heavy objects shorter distances
during repairs or moves etc. Cramo offers a wide range of jacks, pulley
blocks and telphers with different capacities for different types of job
situations. Make sure that the lifting device is firmly anchored before
commencing the lift, as even small lifting heights can lead to extensive
squeezing/crushing injuries.
RECOMMENDED
SAFETY EQUIPMENT
ACCESSORIES
Well ring lifts
Roll container 5 ton
Roll container 10 ton
Prod.no
7542230
7542240
7542330
7542340
7542350
7552330
7552340
7552350
7552360
7553520
7553530
7553440
34
Designation
Jack screw/rack gearing
Jack screw/rack gearing
Jack handoperated hydralic
Lifting capacity
<5 ton
<10 ton
<10 ton
<20 ton
<50 ton
Chain hoist, hand-operated Chain hoist, hand-operated Chain hoist, hand-operated Chain hoist, hand-operated <1 ton
<2 ton
<4 ton
<6 ton
Chain telpher, electric
Chain telpher, electric
Cable telpher, electrically powered Minifor TR30/TR315 www.cramo.com
<500 kg
<1000 kg
1000 kg
tools scaffolding
Light metal scaffolding
Light metal scaffolding, narrow
It can easily be installed in cramped passages,
in shops, storage rooms and between machines
in factories.
Ascent and descent is on the inside of the ladder frame, via a hole in the platform. All ladder
frames are designed the same, enabling a high
tower to easily be made into two or more smaller
scaffolds. Legs and wheels fit just as well to all
the ladders and can easily be changed. Struts
with quick couplings allow installation within
minutes and provide a stable scaffold. Also ideal
as facade scaffolding.
Support struts are required for heights over
2.5m.
Prod no 7612440
Dimensions
W= 0,8 m
L = 2.5 mh max.
Max platform height
(without anchoring) = approx. 8 m outdoors
Light metal scaffold, wide
Suitable for internal and external use. A large platform area providing significant reach when doing
ceiling work, for example. The wheel attachments
in the ladder frames enable quick changes from a
high tower to several smaller units.
To make things easier during facade work, there
are passage sections allowing free passage between two or more platforms.
Support struts are required for heights over 4 m.
Prod no 7612470
Dimensions
W= 1,6
L = 2.5 mh max.
Max platform height
(without anchoring) = approx. 8 m outdoors
Craftsman scaffolding consists of collapsible sections, where gables and stairs are
folded together for compact transport volumes.
During installation, struts are hooked on using
quick-locking couplings in the gable ends and
the sections are locked together with built-in
spring bolts.
The free platform height without support struts
is 4 m or two sections.
Prod no 7612430
Dimensions
W=0.8 m
L=2m
Max platform height = 1.9 m
Facade and bricklayer scaffolding, see page 131
www.cramo.com
35
TOOLS earth and rock drilling machines
eaRTH BORING MACHINE
Prod.no Designation
Weight Capacity
Comments
8112230 Stihl BT360, petrol driven
26 kg
Max. bore Ø 350mm
For boring of base
holes in porous ground
RECOMMENDED
SAFETY EQUIPMENT
rock drillING machine
Quarrying or drilling in earth can be both time-consuming and strenuous. It is therefore important to work with appropriately dimensioned
equipment that helps you carry out work as effectively as possible.
Cramo offers you the market’s most extensive range of both pneumatic
and petrol powered earth and rock boring machines, for large and small
jobs. In our range of products, we have prioritised effective equipment
that reduces the risks for vibration injuries; however, protracted use
without breaks should still be avoided.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Compressed air
8141120 Rock drilling machine, pneumatic, <25kg, Atlas Copco RH572
8141130 Rock drilling machine, pneumatic, <30kg Atlas Copco RH658
5325365 Compressor with drill pack, diesel, XAS47DD/RH572/ 20m hose/ CLG30
Weight
Prod.no Designation
Petrol powered
88145130 Rock drilling machine, petrol, Atlas Copco Cobra 149/Combi
8191210 Rock cracking device, cartridges
Weight
36
www.cramo.com
Air consumptiont
23 kg
25 kg
-
2200 l/min
3480 l/min
-
Max bore depth
Bore dimension
2 m
-
29-40 mm
-
25 kg
-
tools screw & nail tools
nailing and screwing guns
Nailing and screwing can be very time-consuming work if you are not
using the right equipment. Today there are nailing tools powered by
compressed air, cartridges and gas/battery. Naturally, you will find all
variants in Cramo’s extensive range of products.
In Cramo’s shop assortment, there is a selection of nails and screws, as
well as cartridges and other accessories.
ACCESSORIES
Magazine to bolt driving gun
Sleeves for impact wrenchose, winder for air tool
Hilti-nail/shot nail, brad, staple gypsum screw, chipboard screw, duckboard screw, self-tapping screw, etc.
Propellant gas for nailing machine
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8212430
8221210
8239230
8221250
8221420
8221475
8221350
Designation
Weight
Rotation speed
Screw length
Pop riveting guns, battery operated
2 kg
Ø < ca. 5 mm
Gypsum screw driver, electric, Hilti SF4000/SF5000 or equivalent 1.3 kg
0-4300 /min
Automatic screw machine SMD 57, fits power screw driver Hilti SF4000/SF5000
0.35 kg
-
19-55 mm
Gypsum automatic screw driver, electric, Senco Duraspin DS200-AC or equivalent 2.1 kg
0-3300 /min
25-50 mm
Gypsum automatic screw driver, battery, Hilti SF 4000A or equivalent 2.4 kg
0-4000 /min
Gypsum automatic screw driver, battery, Senco Duraspin DS205 or equivalent 2.3 kg
0-4000/ min
25-50 mm
Screw driver with nailing function, pneumatic (High-pressure), MAX HVR41
-
32-41 mm
Battery drill /Screw driver
Many jobs include some form of
hole-making. Cramo has the right
equipment for metal components,
wooden beams as well as for
concrete floors. We also offer a
wide range of drills for different
materials and in different dimensions, e.g. core drilling machines
for hole-making for heating,
water and sanitation pipes and
ventilation ducts.
Our stores stock drills and other
accessories from well-known
manufacturers for optimal results
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8431540
8431550
8221630
Designation
Drill/screwdriver, battery, Hilti SF121 or equivalent Drill/screwdriver, battery, Hilti SF180A or equivalent Hammer screw driver, battery, Makita BTS130RFE or equivalent www.cramo.com
Weight
Drill diam
1.9kg
1.5-13mm
2.2kg
1.6-13mm
1.7kg
Battery power
3Ah/12V
3Ah/18V
3Ah/14.4V
37
TOOLS screw & nail tools
IMPACT WRENCH
When screwing volume is more than some screws, an effective way to
save time and money, as well as improve work efficiency, is to use the
impact wrench. In all Cramo depots you will find the correct tool to do
that.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8223220
8223230
8223430
8223331
Designation
Impact wrench, electric
Impact wrench, electric
Impact wrench, battery-powered, Hitachi VR14DMR Impact wrench, pneumatic
Weight
2.9 kg
5 kg
1.9 kg
2.9 kg
Sleeve attchm
Bolt capacity
Torque
1/2”
M12-M20
300 Nm
3/4”
M14-M24
600 Nm
1/2”
M10-M16
200 Nm
1”
nailing machines
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Capacity
Weight
Nail gradient Brad dim
Staple tool
8231130 Staple gun, pneumatic, Senco SLS 20-M or equivalent 10-38 mm
1.3 kg
8231220 Staple gun, pneumatic, brad nail, Senco Finish Pro 18 or equivalent 15-50 mm 1.3 kg
0º
Ø 1.2 mm
8231230 Staple gun, pneumatic, brad nail, Senco Finish Pro 32 or equivalent 32-63 mm
1.9 kg
0º
Ø 1.6 mm
8231240 Staple gun, pneumatic, brad nail, Senco Finish Pro 41XP or equivalent 25-63 mm
2.1 kg
34º
Ø 1.8 mm
8234220 Staple gun, battery, brad nail, Senco Air Free 25 or equivalent 15-55 mm
2.7 kg
0º
Ø 1.2 mm
8234240 Staple gun, battery, brad nail, Senco Air Free 41 or equivalent 25-63 mm
3.4 kg
34º
Ø 1.8 mm
Nail tool, stave nail
8231340 Nail gun, pneumatic, <100mm, Senco Frame Pro 701 XP or equivalent 50-90 mm 3.6 kg
34º
8231340 Nail gun, pneumatic, <100mm, Senco Frame Pro 651 or equivalent 50-100 mm 3.8 kg
34º
-
8231340 Nail gun, pneumatic, <100mm, Senco Frame Pro 702 XP or equivalent 50-90 mm
3.6 kg
21º
8231350 Nail gun, pneumatic, >100mm, Senco RK 130 or equivalent 50-130 mm
5.2 kg
21º
-
8233340 Nail gun, gas, <100mm, Senco Frame Pro 501CL or equivalent 50-90 mm
4.3 kg
34º
8232130 Nail gun, pneumatic, Senco SN60MC
38-65 mm
3.5 kg
-
-
8232430 Nail gun, pneumatic (high-pressure), <70mm, MAX HN65 or equivalent 38-65 mm
2.3 kg
-
2.5-3.8 mm
8232440 Nail gun, pneumatic (high-pressure), <100mm, MAX HN90 or equivalent 50-90 mm
2.3 kg
-
-
8232630 Nail gun for concrete, pneumatic (high-pressure), MAX HN65J or equivalent 40-60 mm
1.9 kg
-
Roofing felt gun
8231520 Roofing felt gun, pneumatic, <45mm, SCN 40R or equivalent 19-38 mm 2.4 kg
Comment: Endless belt
38
www.cramo.com
tools screw & nail tools
bolt driving guns
ACCESSORIES
Magazine to bolt driving gun
Sleeves for impact wrenchose, winder for air tool
Hilti-nail/shot nail, brad, staple gypsum screw, chipboard screw, duckboard screw, self-tapping screw, etc.
Propellant gas for nailing machine
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Weight
Capacity
Comments
8233370 Gas-powered, Hilti GX 100 or equivalent
3.9 kg max 39 mm Serial installation concrete and steel,
750 nails per charge
8233020 Cartridge-powered, DX 460 or equivalent
3.3 kg
19-72 mm
All kinds of shooting with or
without a magazine
8233030 Cartridge-powered, Hilti DX76 or equivalent
4.3 kg
19-117 mm
Installation of profile plate on
steel and miscellaneous, special shots
8231615 Pneumatic (high pressure), <25mm, MAX HN25 or equivalent
19-25 mm
2.9 kg
Compressor needed
8231625 Pneumatic (high pressure), <65mm, MAX HN120 or equivalent
32-65 mm
2.9 kg
Compressor needed
Consumption table,
nailing with air tools
Area of use
Roof trusses
Joist frame
External panel
Tongue and groove board
Tongue and groove board
Battens 20 x 45 mm
Support battens 45 x 70 mm
Bed laths
Base boards and cover boards
Secondary spaced boarding
Doorcase and corner boards
Chipboard floor
Duckboard
Roofing felt/shingle/roof
base paste board
Interior gypsum
Exterior gypsum and asphaboard
Interior panel
Interior battens and doorcase
Building fittings
www.cramo.com
Consumption approx.
According to constr. dwg.
20 pcs /square metre
15-20/square metre
15-20/square metre
10/square metre
5/square metre
10/square metre
30/square metre
10/square metre
6-10/square metre
25/square metre
30/square metre
Note
Nail length 2.5 x fastened wood
2 nails per roof truss and batten
Possibly observed through tread protection
Nailed zigzag cc 200 mm
30/square metre
25/square metre
20/square metre
40/square metre
6-8/square
39
TOOLS chisel hammers
Chisel hammers, electric
On most construction sites, chiselling and hacking takes place when
demolishing or when making room for pipes, etc. It is important for your
safety that the tools are well maintained and designed for the task.
Cramo has a well-functioning service department and offers a wide
range of chisel and hacking hammers with different capacities for
different types of work. Please consult our skilled personnel to get the
right equipment for the job.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Weight
8242120 Chisel hammer <4kg, Hilti TE104 or equivalent
3.5 kg
4.9 kg
8242130 Chisel hammer <6kg, Makita HM0860 or equivalent 4.7 kg
8242132 Chisel hammer <6kg, Hilti TE500 AVR or equivalent 5.7 kg
6.5 kg
8242142 Chisel hammer <8kg, Hilti TE706 AVR or equivalent 7.2 kg
9.2 kg
8242150 Chisel hammer <10kg, Makita HM1202C or equiv
9.3 kg
8242170 Chisel hammer <14kg, Hilti TE905-AVR or equiv
11 kg
8242250 Breaking hammer <35kg, Makita HM 1810 or equiv 32 kg
Impact
Effect
Comments
energy
2.2 Joule 550 W Chiseling of brick, plaster and light concrete hacking
5.2 Joule 900 W Chiseling of brick, plaster and light concrete hacking 11.4 Joule 1100 W Chiseling of brick, plaster and light concrete hacking
7.5 Joule 1100 W Chiseling of brick, plaster and light concrete hacking
8.5 Joule 1030 W
Chiseling of brick, plaster and concrete
10 Joule 1200 W
Chiseling of brick, plaster and concrete
17 Joule 1350 W
Powerful chiseling of brick, plaster and concrete
17 Joule 1450 W
20 Joule 1600 W
63 Joule 1900 W
Powerful chiseling of concrete
Chisel hammers, pneumatic/PETROL
ACCESSORIES
Pike and flat chisels for pneumatic machines
Joint chisels for hard metal
Joint chisels
Channel chisels
Putty chisel excl. blade
Pike & flat chisels
Spade and asphalt chisels
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Weight
Impact
Air
Hose
energy
consumption
dimension
8243120 Chisel hammer <2kg, pneumatic, Atlas Copco RRC13 or equivalent
1.5 kg
1.4 Joule
241 l/min
10 mm
8243130 Chisel hammer <6kg, pneumatic, Atlas Copco TEX 05P or equivalent
5.5 kg
570 l/min
12.5 mm
8243130 Chisel hammer <6kg, pneumatic, Atlas Copco RRD 57 or equivalent
3.4 kg
9.3 Joule
570 l/min
12.5 mm
8243310 Chisel hammer <15kg, pneumatic, Atlas Copco TEX 09PS or equivalent 10.1 kg
1110 l/min
8243330 Chisel hammer <35kg, pneumatic, Atlas Copco TEX 23 or equivalent
26 kg
1800 l/min
8243430 Chisel hammer <30kg, petrol, Atlas Copco Cobra MK1 or equivalent
24 kg
Petrol 2-stroke
40
www.cramo.com
tools chisel hammers
www.cramo.com
41
TOOLS cross-cutting machines and saws
Jigsaws
The Jigsaw is a very versatile tool that with some limitations on material thickness, can crosscut, bevel, miter and make scrolling curved
cuts. Jigsaws use interchangeable blades depending on the material to
be cut. This is a tool that can be used with one hand, and you will find it
very useful.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Weight
8311230 Jigsaw electric <60mm, Hilti WSJ 850 EB
2.5 kg
8311250 Jigsaw electric <60mm, Bosch GST 85 2.4 kg
Saw depth
wood
150 mm
150 mm
Saw depth
metal
10 mm
10 mm
Saw depth
aluminium
25 mm
25 mm
TIGER SAWS
In order to obtain good results when you cross-cut or saw in different
materials and in different work situations, equipment that is especially
designed for the situation is required.
In Cramo’s extensive assortment, you can find everything from standard
equipment, such as compass saws and floor saws, to tile cutters and
band saws for light concrete – all so that you get the right machine for
just your job. Our shops stock sawblades, blades and other accessories
from well-known manufacturers.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8311230
8311250
8311250
8311560
8311570
8311580
42
Designation
Tiger saw <1100W, electric, Hilti WSR900PE or equivalent
Tiger saw >1100W, electric, Hilti WSR1250PE or equivalent
Tiger saw >1100W, electric, Hilti WSR1400PE or equivalent
Tiger saw, battery <18V, Makita BRJ181 or equivalent
Tiger saw, battery <24V, Hilti WSR650A or equivalent
Tiger saw, battery >24V, Hilti WSR36A or equivalent
www.cramo.com
Weight
3.3 kg
4.2 kg
4.5 kg
3.3 kg
4.3 kg
4.4 kg
Effect/Current Stroke ratio
Stroke length
900 W
900-2700/min
32 mm
1250 W
0-2700 /min
32 mm
1400 W
0-2700 /min
32 mm
18 V
24 V
1400-2200/min
32 mm
36 V
0-2850/min
32 mm
tools cross-cutting machines and saws
circular saws
just your job. Our shops stock sawblades, blades and other accessories
from well-known manufacturers.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8312210
8312220
8312240
8312270
8313500
Designation
Handheld circular saw <70mm, electric, Hitachi C6BU or equivalent
Handheld circular saw <100mm, electric, Hilti WSC85 or equivalent
Handheld circular saw for metal <70mm, Flex CSM 4060
Handheld circular saw for cementplates <70mm, Festool AXT50LA or equiv
Handheld circular saw, control Festool TS 55 EBQ or equivalent
Weight
3.5 kg
7 kg
5.4 kg
6.4 kg
4.5 kg
Blade diam
165 mm
230 mm
185 mm
170 mm
160 mm
Capacity
90°-54 mm/45°-39 mm
90°-85 mm/45°-60 mm
45°/90° 0-30/0-47 mm
90°-55 mm/45°-43 mm
chain saws
In order to obtain good results
when you cross-cut or saw in
different materials and in different work situations, equipment
that is especially designed for the
situation is required.
In Cramo’s extensive assortment, you can find everything
from standard equipment, such
as compass saws and floor saws,
to tile cutters and band saws for
light concrete – all so that you get
the right machine for the job. Our
shops stock sawblades, blades
and other accessories from wellknown manufacturers.
Prod.no
8321210
8321210
8321430
8321430
Designation
Chain saw, electric <2kW, Stihl E20C or equivalent
Chain saw, electric <2kW, Husqvarna E321 or equivalent
Chain saw, petrol, Stihl MS 260 C or equivalent
Chain saw, petrol, Husqvarna H353 or equivalent
www.cramo.com
Weight
4.4 kg
4.5 kg
4.8 kg
5 kg
Effect
2000 W
2000 W
3.5 HP
3.3 HP
Recommende guide bar length
35-40 cm
35-40 cm
32-45 cm
33-50 cm
43
boarding- & cross saws
band saws for light concrete. Our shops stock sawblades, blades and
other accessories from well-known manufacturers.
RECOMMENDED
SAFETY EQUIPMENT
ACCESSORIES
Roller table Gjerde incl. steel tailstock
Trimming table incl. aluminium tailstock
Roller table Dewalt
Prod.no Designation
Clearing saw
8331220 For wood <80mm, Makita 2704
8331220 For wood <80mm, Dewalt 744XP / 744QS
Weight
Blade diam
Cleave at 45
Cleave at 90
33 kg
29 kg
260 mm
250 mm
h 93 mm
h 79 mm
h 64 mm
h 57 mm
Electricity
1-phase 10A
1-phase 10A
Cross-cut at
Cross-cut at
Prod.no Designation Weight Blade diameter H 90° / V 90°
H 45° / V 90° H 90° / V 45°
Electricity
Buck- and clearing saw
8331320 <65mm, electric, Dewalt 707
15.5 kg 216 mm
w 270 x h 60 mm w 190 x h 60 mm w 270 x h 48 mm 1-phase 10A
8331330 <85mm, electric, Makita LS0714 13.1 kg 190 mm
19.5 kg 216 mm
8331340 <115mm, electric, Makita LS1013 21 kg
260 mm
26 kg
305 mm
Blade Blade
Cross-cut at
Cross-cut at
Cross-cut at
Prod.no
Designation Weight diameter
H 90° / V 90°
H 45° / V 90° H 90° / V 45°
Electricity
Boarding, cross-cut and mitre box
8331520 Crosscutting saw <125mm, electric, 45 kg
300 mm
-
-
-
1 phase
Gjerde 1203 or equivalent
8331530 Crosscutting saw <175mm, electric, 139 kg 400 mm
Gjerde 1603 or equivalent
8331540 Crosscutting saw with saw table 380 kg 400 mm
3-phase 16A
<175mm, electric, Ahlm ABS-4001 or equivalent
8331430 Board, cross-cut and mitre box saw 33 kg
250 mm
<75mm, electric, Dewalt 743 or equivalent
8331440 Board, cross-cut and mitre box saw 40 kg
305 mm
w 205 x h 63 mm w 160 x h 35 mm w 205 x h 50 mm 1-phase 10A0
<90mm, electric, Dewalt 27105 or equivalent
8339120 Saw table for cross-cut and mitre box saw
44
www.cramo.com
tools cross-cutting machines and saws
cross-cutting machines
band saws for light concrete. Our shops stock sawblades, blades and
other accessories from well-known manufacturers.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Weight
Cross-cutting machines for stone & concrete, electric
8333220 25mm, handheld, electric, Hitachi CC12Y or equivalent
12 kg
8333220 <125mm, handheld, electric, Husqvarna K2300 or equivalent 11 kg
8333220 <125mm, handheld, electric, Husqvarna K3000 or equivalent 8.9 kg
8333260 Handheld, electric, Husqvarna K3000 CUT-N-BREAK
10.4 kg
8316270 Handheld, electric, Kango KS 26 or equivalent
13 kg
Prod.no Designation
Cross-cutting machines for stone & concrete, petrol
88333410 <125mm, handheld, petrol, Husqvarna K650
8333460 Cut & break machine <400mm, handheld petrol, Husqvarna K650
Weight
10 kg 11 kg
9.7 kg
12 kg
10 kg
Prod.no Designation
Cross-cutting machines for stone & concrete, hydraulic
8314520 Cross-cut machine, handheld. Husqvarna KS3600
www.cramo.com
Blade diam
Max cutting depth
305 mm
350 mm
350 mm
230 mm
260 mm
100 mm
125 mm
125 mm
400 mm
260 mm
Concrete, stone, brick and asphalt
Blade diam Max cut depth Effect 300 mm
350 mm
350 mm
350 mm
230 mm
Weight
9.1 kg
100 mm
125 mm
125 mm
125 mm
400 mm
4.7 hp
4.7 hp
5.0 hp
6.1 hp
4.7 hp
Comments
Double blade. Concrete, stone, brick Blade diam Max cut depth
Effect 350 mm
-
260 mm
Comments
Comments
Hydraulic
45
bench saws
the job. Our shops stock sawblades, blades and other accessories from
well-known manufacturers.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8333320
8333320
8333321
8332320
Designation
Bench saw on stand, electric, Tyrolit HHCT-9 or equiv
Bench saw on stand, electric, Husqvarna TS 350FD or equiv
Bench saw on stand, electric, Husqvarna TS 400F or equiv
Bench saw on stand for metal, electric, Niko DC14 or equiv
Weight Saw depth x saw length Blade diam
Comments
79 kg
110 x 600 mm
350 mm
Concrete, stone, brick
85 kg
105 x 730 mm
350 mm
96 kg
130 x 700 mm
400 mm
23 kg
125 mm
-
8336330
8336380
8336430
8341450
Tile saw, electric, Husqvarna TS 230 F or equivalent
Tile saw, electric, Husqvarna TS 73 or equivalent
Tile saw, battery, Makita 4191 DWD or equivalent
Band saw, for light cement block, electric
13 kg
41 kg
2.1 kg
180 kg
46 mm
230 mm
Tiles
50 mm
230 mm
Tiles
21 mm
80 mm
Tiles
420 mm
Saw table 1000x800 mm
floor saws
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Weight
Saw depth
Blade diam
Comments
Electric
8334210 Floor saw <200mm, concrete/asphalt, electric, Husqvarna FS600E 95 kg
200 mm
500 mm Concrete, stone and asphalt
8334245 Floor saw <350mm, concrete/asphalt, electric, Husqvarna FS800E 220 kg
320 mm
800 mm Concrete, stone and asphalt
Petrol/diesel
8334410 Floor saw <125mm, concrete/asphalt, petrol, Mikasa MCD-1U
57 kg
100 mm
300 mm
8334420 Floor saw <150mm, concrete/asphalt, petrol, Husqvarna FS350
94 kg
120 mm
350 mm
8334425 Floor saw <150mm, concrete/asphalt, petrol, Husqvarna FS400 98 kg
140 mm
400 mm
8334430 Floor saw <170mm, concrete/asphalt, petrol, Husqvarna FS450 140 kg
200 mm 500 mm
8334460 Floor saw <240mm, concrete/asphalt, diesel, Husqvarna FS600 250 kg
240 mm 625 mm
46
www.cramo.com
tools welding and other cutting machines
welding
Cramo offers a standardized range of small welding machines for
service purposes. In addition we can also provide special machines for
welding plastic pipes.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8361620
8361220
8361230
8361240
8368500
Designation
Weight
Welding capacity
Comments
Welding machine with generator <200A, petrol
<100 kg
<200 A
Terminal 1-phase 16A=1st, 3-phase 16A=1st
Welding rectifier <150A, electric, Caddy 140 or equivalent 10 kg
140 A
1-phase 10A
Welding rectifier <200A, electric
<200 A
1-phase 10A
Welding rectifier <300A, electric, Caddy 250 or equivalent 15 kg
250 A
3-phase 16A
Electric muff welding, VRS-600 (for plastic)
Contact your nearest Cramo depot
other cutting machines
Prod.no
8316220
8316240
8337100
8337105
Designation
Weight
Comments
Alligator saw <275mm, electric, Dewalt DW391
4 kg
Blade length 275 mm
Alligator saw <425mm, electric, Dewalt DW393
4.2 kg
Blade length 425 mm
Saw container with Gjerde 1603 including Gjerde saw with roller table, lighting, substation and chip vacuum exhaust.
Saw platform with weather protector including Gjerde saw with roller table, lighting and substation.
www.cramo.com
47
TOOLS grinding and milling machines
cross-cut & angular grinders
Cramo has an extensive range of grinding and milling machines that
will help you achieve the desired results, regardless of the material that
is to be machined.
When grinding or milling, the quality of the grinding and milling wheels
are of the greatest importance in obtaining clean and straight grooves
and ground surfaces. Consequently, Cramo stores stock well-known
quality brands for various applications.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8411230
8411240
8411250
Designation
Cross-cut and angular grinder <150mm, electric, Hilti DC125 or equivalent
Cross-cut and angular grinder <180mm, electric, Hitachi G18SH or equivalent
Cross-cut and angular grinder <230mm, electric, Hilti DC230-S or equivalent
Blade diam
125mm
180mm
230mm
Effect
820 W
2000 W
2500 W
Comments
11000/min
8500/min
6500/min
handheld grinders, wood
Prod.no Designation
Grinding surface/width
Effect Weight
Comments
Handheld for wood, electric
8454540 Paint and putty remover, handheld, Flex WS702VEA ”Giraffe”
225 mm 200 W 3.8 kg
Reach up to 3m without a ladder
8454545 Paint and putty remover, handheld, Flex WSK702VEA ”Giraffe”
225 mm 200 W 3.8 kg
Reach up to 2m without a ladder
8411820 Corner grinder, oscillating, Fein Multimaster or equivalent 180 W 1.1 kg
The Supercutter tool cannot be
used for lighter grinding
8411830 Corner grinder, oscillating, Fein Supercut or equivalent 400 W 1.5 kg
The multimaster tool can be
used for lighter grinding
8412270 Surface grinder machine (round), oscillating, electric 150 mm 350 W 2.8 kg
8413250 Abrasive belt grinder, electric, Hitachi SB10 or equivalent
100x610 mm 950 W 5.3 kg
2 speed
Floor grinding machines, wood
8413320 Abrasive belt-grinding machine for wooden floors, Duri Lillhummel 200 mm 1800 W 44 kg
8413320 Abrasive belt-grinding machine for wooden floors, Duri Scorpion / Libra200 mm 1500 W 45 kg
8413320 Abrasive belt-grinding machine for wooden floors, Duri Aries 200 mm 2200 W 55 kg
8413330 Edge grinder for wooden floors, electric
180 mm
8412720 Edge grinder for wooden floors, electric, Duri minikant or equivalent 150 mm 1000 W 8 kg
8451200 Planing machine, hand operated, electric, Hitachi P20SA2 or equiv
82 mm 720 W 3 kg
8414422 Grinding machine for wooden floors, HTC 420
420 mm 2200 W 94 kg
Carpet strippers
8454310 Carpet remover <200mm, electric, Duristripper 2000 or equivalent
210 mm 2000 W 16 kg
8454350 Carpet remover <340mm, electric, Duri Mulitistripper or equivalent 320 mm 750 W 59 kg
8454370 Carpet remover <350mm, electric, Wolf super stripper or equivalent 370 mm 2500 W 100 kg
8454120 Wallpaper and canvas remover, electric, Festo 550 Plus or equivalent 120 mm 710 W
48
www.cramo.com
tools grinding and milling machines
concrete grinding machine for floor, electric
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Grinding surface
Effect
Weight
8414310 ABS833 400 mm
900 W
43 kg
8414410 Floormate 150 150 mm
1100 W
27 kg
8414420 Floormate 280, 1-phase 280 mm
3000 W
70 kg
8414420 Floormate 280, 3-phase
280 mm
2200 W
70 kg
8414425 HTC 400 400 mm
2200 W
69 kg
8414422 HTC 420 420 mm
2200 W
94 kg
8414430 HTC 500 500 mm
4000 W
147 kg
8414430 Floormate 400 400 mm
4000 W
115 kg
8414440 HTC 650 650 mm
5500 W
240 kg
8414460 HTC 650 HDX
550 mm
11000 W
440 kg
8415430 HTC 950 RX
950 mm
15000 W
600 kg
Comments
1-phase
Grinding pressure 15 kg, 1-phase
Grinding pressure 35 kg
Grinding pressure 35 kg Grinding pressure 40 kg, 3-phase
Grinding pressure 100 kg, water tank 17l, 3-phase
Number of grinding heads 4,
Grinding pressure 183/272, 3-phase
Remote control, Grinding pressure 250-400 kg, 3-phase
floor/surface milling machines
is to be machined.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Milling surface
Effect
Weight
8421250 Wheeled, electric, Von Arx VA30S or equivalent
300 mm
7500 W 181 kg
8421630 Electric, hydraulic traction, Von Arx VA30SH or equiv
300 mm
7500 W 277 kg
8421340 Electric, Airtec RS165 or equivalent
165 mm
2200 W 30 kg
8421230 Wheeled, electric, Von Arx FR200 or equivalent
200 mm
2200 W 54 kg
www.cramo.com
Comments
Distance wall-milling groove 90 mm
Variable speed transmission,
forward/backward
Distance wall-milling groove 54 mm
49
TOOLS grinding and milling machines
concrete grinding machine, handheld
is to be machined.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Grinding surface
Effect
Weight
Comments
8414120 Concrete grinding machine electric, Flex WS1505FR or equivalent 125 mm 600 W
5.5 kg
For standing concrete grinding of floors, ceilings and walls
8414910 Concrete grinding machine, electric, Flex LG1707 VRD or equiv
105 mm 1500 W 4.3 kg
Can be used in ceiling angles, next to walls, etc, detachable nose
8414940 Concrete grinding machine, electric, Hilti DG 150 or equiv
150 mm 2100 W 4.1 kg
-
other milling machines
Prod.no Designation
Capacity Effect
Weight
8423220 Portable surface milling cutter, electric. Festool OF 1010 EBQ or equivalent
- 1010 W 2.7 kg
8423650 Surface milling machine, electric, Festool SAF 750 E or equivalent
80 mm 750 W
3.7 kg
8425410 Concrete groove miller, Hilti DC 20SE or equivalent
40/46 mm 1950 W 5.6 kg
8425420 Concrete groove miller, electric, Baier BDN453 or equivalent
45/35 mm 1800 W 10 kg
50
www.cramo.com
Comments
Clamping collet 8 mm
1-phase
The dimensions refer to
groove depth/groove width
The dimensions refer to
groove depth/groove width
tools DRilling machines
drilling machines
Many jobs include some form of hole-making. Cramo has the right
equipment for metal components, wooden beams as well as for concrete floors. We also offer a wide range of drills for different materials
and in different dimensions, e.g. core drilling machines for hole-making
for heating, water and sanitation pipes and ventilation ducts.
Our stores stock drills and other accessories from well-known manufacturers for optimal results.
RECOMMENDED
SAFETY EQUIPMENT
DRILLING ACCESSORIES
Drill type SDS + STS max.
Drill 16mm, length up to 250 mm
Drill 16 mm, length up to 400 mm
Drill 31-50 mm, length up to 400mm
Drill 31-50 mm, length up to 600 mm
Drill 31-50 mm, length up to 1000 mm
Prod.no Designation
Drillining cap
Effect
Weight
Comments
ELECTRIC
8431210 Portable drilling machine, Hitachi D10VF or equivalent
<10 mm 710 W
1.8 kg
Drilling in wood or steel
8431220 Portable drilling machine, Makita DP4700 or equivalent
<13 mm 510 W
2.0 kg Driving frame screw or drilling in wood or steel
8431250 Angle drilling machine, Hitachi D10YA or equivalent
Steel 10 mm/ 400 W
1.7 kg
Wood 15 mm
8434230 Magnetic drilling machine
8430210 Magnetic drilling stand
Prod.no Designation
Drill cap
BATTERY
8431540 Drill / Screwdriver, battery, max 15,6V. Hilti SF121-A or equiv 1.0-13 mm
8431550 Drill / Screwdriver, battery, max 15,6V. Hilti SF180-A or equiv 1.6-13 mm
www.cramo.com
Effect
Weight
3Ah/12V
3Ah/18V
1.9 kg
2.2 kg
Comments
Screwing / drilling
Screwing / drilling
51
TOOLS drilling machines
drillhammer
Many jobs include some form of hole-making. Cramo has the right
equipment for metal components, wooden beams as well as for concrete floors. We also offer a wide range of drills for different materials
and in different dimensions, e.g. core drilling machines for hole-making
for heating, water and sanitation pipes and ventilation ducts.
Our stores stock drills and other accessories from well-known manufacturers for optimal results.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Drilling cap Effect Weight Impact
Comments
in concrete
energy
Drillhammer, electric
8432130 Hilti TE6-C or equivalent
4-24 mm 650 W 2.8 kg 1.8 J
Drilling in concrete/walls, lighter chiselling work
8432130 Hilti TE2M or equivalent 4-20 mm 600 W 2.3 kg 1.8 J
Drilling in wood and metal, drilling with impact in concrete
Drillhammer, battery
8432450 Hilti TE6A, 36V, or equivalent 3-20 mm 36 V
4.7 kg 1.5 J
8432550 Hilti TE7A, 36V, or equivalent 5-24 mm 36 V
4.9 kg 2.6 J
Combihammer, electric
8432230 Hilti TE16C or equivalent
5-28 mm 800 W 3.8 kg 3.2 J
8432230 Hilti TE30C AVR or equivalent 5-28 mm 850 W 4.0 kg 3.3 J
8432230 Hilti TE35C or equivalent
6-82 mm 900 W 4.95 kg 3.8 J
8432242 Hilti TE56-ATC or equivalent <90 mm 1100 W 6.6 kg 7.0 J Drilling in concrete/walls, chiselling function, active torque control
8432240 Hilti TE74/TE75 or equivalent <125 mm 1050 W 7.9 kg 8.0 J
8432245 Hilti TE80-ATC or equivalent <125 mm 1700 W 10.2 kg 11 J Drilling in concrete/walls, chiselling function, active torque control
core drilling machines
DRILLING ACCESSORIES
Diamond core bits
Diamond drills stand
Base plate vacuum pumps
Water supply pumps
Prod.no Designation
Drill cut
Drill cut Effect Weight
Comments
in brick in concrete
8437280 Core drilling mach <162mm, electric, Hilti DD100
16-162 mm
8-42 mm 1700 W 6.2 kg
Hand-held
8437280 Core drilling mach <162mm, electric, Hilti DD130 -162 mm
-152 mm 1900 W 21 kg
Stand or handheld
8437310 Core drilling mach <202mm, electric, Hilti DD160 25-202 mm 25-202 mm 2000 W 26 kg
Stand
8437340 Core drilling mach <400mm, electric, Hilti DD200 25-400 mm 25-400 mm 2600 W 12.7 kg 3 speed, drill stand with quick brace
8437320 Core drilling mach <250mm, electric, Hilti DD250
25-250 mm 25-250 mm 2600 W 29 kg 3 speed, drill stand with quick brace
8437240 Core drilling mach <52mm, handheld, Hilti DDEC-1
8-35 mm
8-35 mm
5.7 kg
8437360 Core drilling machine, electric Hilti DD400E 82-500 mm 82-500 mm 4100 W 37 kg
Stand, 3-phase
8437740 Core drill stand variable
8437920 Vacuum pump incl vacuum plate
52
www.cramo.com
tools cutting and bending machines
Reinforcement iron cutters
On many work sites it is necessary to cut and bend round bar or
reinforcement bar. Cramo offers a broad range of products, from small
handheld machines to powerful machines for large dimensions.
We also have nibbling machines for cutting thin sheet metal in dimensions 0.5-2.5 mm, perfect for construction sites.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Capcity
Weight Dimension wxhxl
8511210 Cutting pliers <10mm, electric, handh, Novopress 10N or equiv - 10 kg
-
8511230 Cutting pliers <16mm, electric, handh, Bendof DC16M or equiv 16 mm 7 kg
150x115x460 mm
8511240 Cutting pliers <16mm, electric, handh, Bendof DC20MX or equiv
6-20 mm 10 kg
150x135x500 mm
8511330 Cutting pliers <16mm, battery, handh, Bendof DC-16MB or equiv 16 mm 5.5 kg 93x230x330 mm
8511330 Cutting pliers <16mm, battery, handheld, Bendof DC32N or equiv 6-32 mm 39 kg
180x260x645 mm
8511430 Cutting and bending machine <16mm, Bendof DBC16 or equivalent 0-16 mm 15 kg
170x200x570 mm
Comments
single 8-10 mm /
double 5-6 mm
Cutting speed 2 S
Cutting speed 3 S
Cutting speed 5.5 S
Box, foot pedal,
tool set as accessory
-
high clip and low clip
Prod.no Designation
Capcity Weight Dimension wxhxl
Comments
High clip 8512320 Cutting machine <32mm, electro hydraulic, Weelu W60/25 or equiv 12-40 mm 550 kg 600x1200x1000 mm
380V 5.5 kW
Low clip
8512210 Cutting machine <40mm, electro hydraulic, Weelu S32 or equiv
25-32 mm 360 kg 780x720x1560 mm
380V 4 kW
8565130 Profile shears for steel crossbars
8524220 Shearing tool for wood/laminate
14.5 mm
8565320 Straight shears, electric, Dräco 3514-7R 2 kg
Steel 1.75 mm/Alu 2.5 mm/
Stainless 1.5 mm
8569510 Cutting bench for spiro-pipes
80-315 mm 37 kg 440x430x1890 mm
Length 0.2-3 m
www.cramo.com
53
TOOLS cutting and bending machines
bending machine
On many work sites it is necessary to cut and bend round bar or
reinforcement bar. Cramo offers a broad range of products, from small
handheld machines to powerful machines for large dimensions.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Capcity Weight Dimension wxhxl
Comments
8532210 Bending machine, electro mechanical, Bendof Micro DBD16
6-12 mm 23 kg
Bending speed 1800/1.5 S
8532230 Bending machine, electro mechanical, Bendof DBD25
0-20 mm 86 kg 500x900x670 mm
Bending speed 1800/6 S
With clamp bending addition, 6-12 mm
8532230 Bending machine, electro mechanical, Bendof Maxi
0-20 mm 140 kg 610x750x550 mm
Bending speed 1800/4 S
8533370 Bending machine, electro hydraulic, Weelu W320
0-32 mm 400 kg 780x900x800 mm
Bending speed 540/1.5 S
8533380 Bending machine, electro hydraulic, Weelu W400 B32PC
0-40 mm 490 kg 900x870x1000 mm
8532130 Bending machine, electro hydraulic, handheld, Bendof HB16
0-16 mm 15 kg 195x205x585 mm
Bend angles up to 135°
nibbling machine
We also have nibbling machines
for cutting thin sheet metal in
dimensions 0.5-2.5 mm, perfect
for construction sites.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8561210
8561220
54
Designation
Nibbling machine <2mm, electric, Fein RSS636 or equivalent
Nibbling machine <3,5mm, electric, Fein RSS638 or equivalent
www.cramo.com
Capcity
<1.5 mm
<2.5 mm
Weight
1.6 kg
1.9 kg
Comments
Cutting speed 1.7m/min
Cutting speed 2.5m/min
tools cutting and bending machines
tying machine/najomat
The tying machine Najomat performs tying and supporting of reinforcing bars in one automatic and fast operation. The machines can be
used in many applications and is suitable for plumbers, electricians and
working with reinforcement bars.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
8562230
8562242
8622760
Designation
Tying device <39mm, handheld, battery, MAX RB395/RB397
Tying device <65mm, handheld, battery, MAX RB650
Sealing gun battery, Panasonic EY3654CQ
www.cramo.com
Capcity
20-39 mm
20-65 mm
7.2V
Weight
Comments
2.1 kg
3.3 kg
-
Cartridges 350 ml or sausage material 600 ml
55
TOOLS MEASUREMENT and CONTROL INSTRUMENTS
LEVELLING INSTRUMENT
Measurement and control instruments have been used for building and
construction work for a long time. The instruments also have many
application areas in the manufacturing industry.
Cramo offer several variants of laser equipment that will help you to
properly measure both small and large constructions. Please consult
our skilled personnel for help in selecting the right equipment for your
needs.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no
91181210
91811210
91187810
Designation
Levelling instrument, Spectra AL228 Levelling instrument, Topcon AT-G4N
Accessory: Detector LS-70B Red/LS-50B Green
Accuracy
1.5 mm
2.0 mm
Magnification
28x
26x
Shortest focus
0.6 m
0.6 m
building laser
construction work for a long time. The instruments also have
many application areas in the manufacturing industry.
needs.
ACCESSORIES
Stand levelling
Stand levelling, crank
Grade rod 2 m
Grade rod 4 m
Laser mould rod
Laser mould plate
Measuring wheel
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Accuracy Max distance
Comments
Plane laser,horizontal, self leveling
9187180 Level laser. Leica Rugby 100LR or equivalent
+/-1.5 mm at 30 m 750 m
Self-levelling
9187180 Level laser. Topcon RL-H3A or equivalent
+/-1.9 mm at 50 m 350 m
Self-levelling
Plane laser accuracy
9181730 Laser instrument, one-slope. Spectra 1242
+/-1.6 mm at 30 m 400 m
Weather-protected, grade capacity 10%
Two-slope laser
9187320 Laser instrument, Spectra GL 720/GL 722 or equiv
+/-1.2 mm at 30 m 450 m
Grade interval -10% – +10%
9187320 Laser instrument, Topcon RL-H2Sa or equivt
+/-2.5 mm at 50 m 350 m Grade interval -8% – +8%
9187330 Laser instrument, Topcon RL-100 2S or equiv
Grade interval -25% – +25%
Interior laser, visible light
9187440 Laser 3D, Hilti 3-D PM10 or equivalent
+/-3 mm at 10 m 30 m
3 AA batteries
9187440 Laser Hilti 4D PM24 or equivalent
+/-3 mm at 10 m 30 m
For reinforcement work. 4 AA batteries
9187440 Laser Hilti 2D PML32 or equivalent
+/-1.5 mm at 10 m 10 m
For reinforcement work.
9187450 Combi- crossline laser laser, Hilti PMC36 or equiv
Level and vertical laser, visible light
9187510 Level and vertical laser red light, Spectra HV401
+/-1.5 mm at 30 m 400 m
Self-levelling
9187510 Level and vertical laser red light, Topcon RL-VH3A
+/-2.5 mm at 50 m 250 m
For outdoor environm, not remotely controlled
9187550 Level and vertical laser green light, Topcon RL-VH2G +/-2.5 mm at 50 m 250 m
For outdoor environments
56
www.cramo.com
tools MEASUREMENT and CONTROL INSTRUMENTS
pipe-laying laser
construction work for a long time. The instruments also have
many application areas in the manufacturing industry.
needs.
Prod.no
9187630
9187630
9187670
Designation
Red light, automatic, Spectra DG711 or equivalent
Red light, automatic, Topcon TP-L4, red light
Green light, automatic, Topcon TP-L4G, green light
Grade interval
+/1.5 mm at 30 m
+/-2.4 mm at 50 m
+/-2.4 mm at 50 m
Gradient
Comments
-15% to +40%
Temperature compensation
-15% to +40%
-15% to +40% 4X visibility compared with red light
other measuring instruments
Infrared thermography is the
easiest and quickest method to
detect energy waste, moisture
and electrical issues in buildings. An infrared camera shows
exactly where the problems are
and helps focus your attention
to problem areas with regards
to energy loss.
Prod.no
9165530
9164160
9164120
9184370
9175725
Designation
Grade interval
Resolution
Comments
Humidity indicator, Protimeter Surveymaster C2000
7-70% RH 0,10%
Displays up to 70% RH
Metal Detector, GA52/Ferrotec 200
reinforcement bars, copper, electric
Metal detector and distance reading, Bosch D-Tect 150
+/-5 mm at 150 mm
reinforcement bars, copper, electric
Distance measurer >100m, Hilti PD30/PD40
-1.5 mm
Range 70 m, 200 m with prism
Infrared heating camera, Flir Infracam
-10 – +100C
Stores 50 images, JPEG
www.cramo.com
57
TOOLS communications & safety instruments
communication
Prod.no
9222520
9222550
9222820
Designation
Communications radio, portable, Motorola GP 340
Comm radio, portable, waterproof, Radio Icon F-61
Charger
Large construction sites requires good communication between operators and site managers. Cramo offers a full range of walkie talkies with
professional features and reach.
Personal safety
The Cramo Safety concept has been developed over the years and
now incorprates products, systems, technical support, planning and
training. We offer personal safety in combination with a complete set
of fall protection equipment.
The full Cramo Safety range is not available on all markets.
RECOMMENDED
SAFETY EQUIPMENT
Prod.no Designation
Comments
99225000 Safety harness, Miller
7736330 Safety rope lock
Max working length 10 m
9818620 Personal fall limiter kit, Falcon PFL
For use in lifts, Max working length 1.9 m
Lift- and scaffolding-kit
9818220 Full body harness S/M
9818222 Full body harness L/XL
9818224 Full body harness XXL
9818620 Self-retracting life line with lock and carabiners To be combined with the body harness desbribed above. L=3m
Roof and mounting-kit
9818220 Full body harness S/M
9818222 Full body harness L/XL
9818224 Full body harness XXL
9818472 Flexible rope anchorage line <20m
9818520 Rope grab
Other accessories
9818630 Self-retracting life line L=6m
9818640 Self-retracting life line L=10m
fall protection
Falling down from a building or similar is the most common cause for
serious injuries or deaths on a building site. Safety at the building site is
an important part of today’s planning. Increased demands and stronger
legislation from authorities has put focus on working safety even more.
Cramo can offer a complete package with products for temporary fall
protection such as steel mesh barriers, safety posts, couplings and
smart attachments.
RECOMMENDED
SAFETY EQUIPMENT
58
www.cramo.com
tools cleaning equipment
High-pressure wash
A prerequisite for a good working environment is that the work site can
to a great extent be kept clean of dust, dirt, micro particles and gaseous
substances.
Cramo has a complete assortment of industrial dust cleaners and air
purifiers for both wet and dry materials. In addition, we have equipment
for connecting grinding and milling equipment to certain industrial dust
cleaners.
Prod.no Designation
High-pressure wash, cold water
9522120 <120bar, 1-phase, Alto Poseidon 5-28 or equivalent
9522125 <140bar, 1-phase, Alto 30CA special or equivalent
9522140 <160bar, 1-phase 9522150 <190bar, 3-phase, Alto Poseidon 7-66 or equivalent
Pressure
110 Bar
160 Bar
160 Bar
190 bar
Water quantity Weight
12 l/min
70 kg
10 l/min
24 kg
20 l/min
20 l/min
74 kg
Comments
Max supply water 60 C
High-pressure washers, hot water
9524130 3-phase, diesel, Alto Neptune 7-63
175 Bar
20 l/min
224 kg Max. water in 400 C, out 100-1400 C
9522475 Diesel, trailed mounted with tank 940 L
Prod.no Designation
Air quantity
Capacity
Other cleaning equipment
9511070 Polishing machine for floor, Golia
9525010 Sand blaster, dry, smaller
< 8 Bar
< 24 l
9525020 Sand blaster, dry, larger
< 10.5 Bar
< 120 l
9547110 Odour sanitizer
Air cleaner
Cramo offers several solutions of decreasing dust in a working
environment. We can support in selecting the appropriate equipment for
asbestos and PCB related demolition work. Most units are supplied with
the efficient HEPA-filter that removes the almost invisible particles, for
example quartz. The units are portable and easy to set up.
Prod.no Designation
9543210 Circulation cleaner <500m3/h, Aervent Mini
9543221 Circulation cleaner <600m3/h, Dustcontrol Aircube 9543230 Circulation cleaner <1000m3/h, A700
9543241 Circulation cleaner <1500m3/h, A1700
9543250 Circulation cleaner <2000m3/h, Clair 2000
www.cramo.com
Air quantity
250 m3/h
500 m3/h
<600 m3/h
1700 m3/h
2000 m3/h
wx h x l
Weiight
Comments
335x390x455 mm
15 kg
350x380x340 mm13 kg
2 speed
420x410x470 mm14 kg
2 speed
650x850x350 mm25 kg
2 speed
260x560x750 mm28 kg
59
TOOLS cleaning equipment
dust collectors
A prerequisite for a good working environment is that the work site can
to a great extent be kept clean of dust, dirt, micro particles and gaseous
substances.
Cramo has a complete assortment of industrial dust cleaners and air
purifiers for both wet and dry materials. In addition, we have equipment
for connecting grinding and milling equipment to certain industrial dust
cleaners.
HEPA filters are used on some air purification equipment to stop
hazardous, invisible micro dust, while at the same time, the same
equipment can even cope with heavy dust and dirt. Equipment is placed
where one can directly connect fresh air to the interior environment at
the same time as it cleans indoors. Smoke from welding and other hot
work can be filtered away by equipment with active carbon filters. All
this improves your work environment and safeguards your health. Please contact your nearest Cramo depot to obtain help in finding a
working solution for temporary air cleaning. We also offer sand blastcleaners and a wide range of high-pressure cleaners with both cold and
hot water for effective cleaning.
hazardous, invisible micro dust, while at the same time, the same
equipment can even cope with heavy dust and dirt. Equipment is placed
where one can directly connect fresh air to the interior environment at
the same time as it cleans indoors. Smoke from welding and other hot
work can be filtered away by equipment with active carbon filters. All
this improves your work environment and safeguards your health. Prod.no Designation
Suction Inlet
Weight Collection
Comments
capacity diam
volume
Dust cleaners
9532220 Dust cleaner <1,5kW, <35l, Festool CT22 or equiv
234 m³/h 27 mm 13 kg 24 l 1-phase, for dust not hazardous to health
9532230 Dust cleaner <1,5kW, >35l, Festool CT44 or equiv
9531240 Dust cleaner <2,3kW, Hilti VCD 50 2.1kW
Dust collector wood, concrete, and environmentally harmful waste
9544300 Dust collector, electric, Dustcontrol DC 1800 Auto
190 m³/h 38 mm 10 kg 11 l
1-phase
9544310 Dust collector, electric, Dustcontrol DC 2800C Auto 190 m³/h 38 mm 14 kg 11 l
1-phase
9544330 Dust collector, electric, Dustcontrol DC 3800C 320 m³/h 50 mm 35 kg 30 l
1-phase
9544430 Dust collector, electric, Dustcontrol DC 3800C Twin 320 m³/h 50 mm 54 kg 2x30 l
1-phase
9544340 Dust collector, electric, Dustcontrol DC 5800C 5 kW 470 m³/h 76 mm 205 kg 30 l
3-phase, 16A
9544360 Dust collector, electric, Dustcontrol DC 5800C 9.2 kW 800 m3/h 108 mm 210 kg 50 l
3-phase, 32 A. Can be connected to
piping system
Accessory dust collector, should be used when grinding floors
9544370 Pre-selector for dust separator
- 76 mm 35 kg 95 l Suitable for course material, water, etc.
9549230 Pre-selector for dust separator with collector (wheelbarrow)
<150L 2 inlets for 2 machinesat the same time
60
www.cramo.com
tools cleaning equipment
wet separator
We are offering the most superior quality products in wet vacs. You receive robust, reliable machines which
allows to vacuum up concrete slurry, oils and cutting fluids where simple machines would only vacuum up
water.
Prod.no Designation
Pump cap
9533320 Pullman PV250P or equivalent
150 l/min
9522125 Pullman PV350P-400 or equivalent 290 l/min
Weight Collection volume
Comments
28 kg
29 l
All types of wet suction
47 kg
55 l
All types of wet suction
pic from Jourtryck
Anders
www.cramo.com
61
TOOLS cleaning equipment
guide to choosing the correct dust collector
Type of work
Type
Dust collector
Accessories
Recommended
pres-sep/accessory
Hacking
Hacking hammer
DC 2800/DC 1800
DC 3800
Ø 38mm max 10m
Ø 50mm max 15m
DC AirCube & suction hood 6078 +
bellows. Alt. A700
Drilling
Combihammer
Drillhammer
DC 2800/DC 1800
DC 3800
Ø 38mm max 10m
Suction hood & DC AirCube
Alt. A700
Floor milling
250 mm = > 350 mm
DC 3800
DC 5800
Ø 50mm max 15m
Ø 50mm max 30m
DCF Wheel barrow
DCF Wheel barrow
ABS 883
Floormate 150
Floormate 280
HTC 400
HTC 420
HTC 500
Floormate 400
Floormate 1000
DC 3800
DC 3800
DC 3800 Twin
DC 3800 Twin
DC 3800 Twin
DC 5800 5 kW
DC 5800 5 kW
DC 5800 9,2 kW
Core drilling
Core drill, wet
Core drill, dry
DC 2800w
DC 2800c
Ø 38mm max 10m
Ø 38mm max 10m
Materialtransport
Evacuation of
shavings or other
material
DC 5800 9,2 kW
Suglans Ø 76mm
Pre-separator for feedout in open
container
Demolition
Sledge hammer
Hacking machine
Cross-cutting
machine
DC 2800/DC 1800
DC 2800
DC 3800 Twin
Ø 38mm max 10m
Ø 38mm max 10m
Ø 50mm max 20m
AirCube & suction hood
Alt. A700
Cleaning
Light
Heavy
DC 2800/DC 1800
DC 3800/DC 5800
Ø 38mm max 10m
Ø 50mm 20-30m
At central system; DCF wheel
barrow
Welding
Electro-welding
Mig welding
Electro muff welding
DC 2800/DC 1800
DC 2800/DC 1800
DC 2800/DC 1800
Sawing/
cross-cutting
Cross-cut/mitre saw
Handheld
Compass saw
Circular saw
Mitre saw box
Partner cross-cut
Angular cross Ø 125230mm
DC 2800/DC 1800
DC 2800/DC 1800
DC 2800/DC 1800
DC 2800/DC 1800
DC 2800/DC 1800
DC 3800 Twin
DC 3800
Ø 38mm max 10m
Ø 38mm max 10m
Ø 38mm max 10m
Ø 38mm max 10m
Ø 38mm max 10m
Ø 50mm max 10m
Ø 50mm max 10m
DC AirCube
Alt. A700
*
*
*
*
*
Wet suction
Core drill
Floor saw
Concrete saw
Tile saw
Bench saw
Other wet suction
W 350/PV 350
W 350/PV 350
W 350/PV 350
W 250 /W 350/PV 250
W 250 /W 350/PV 350
W 250 /W 350/PV 350
Ø 38mm max 10m
Ø 38mm max 10m
Ø 38mm max 10m
Ø 38mm max 10m
Ø 38mm max 10m
Ø 38mm max 10m
Sludge sack
Sludge sack
Sludge sack
Sludge sack
Sludge sack
Wall grinding/
milling
Grinding machine Ø
125-150mm
”Giraff”
Abrasive belt grinder
Ocillating grinder
Portable surface
milling cutter
Concrete groove mill
Electric plane
DC 2800
Ø 38mm max 5m
DCF 2800 & AirCube
DC 2800/DC 1800
DC 2800/DC 1800
DC 2800/DC 1800
DC 2800/DC 1800
Ø 38mm max 10m
Ø 38mm max 10m
Ø 38mm max 10m
Ø 38mm max 10m
DC 2800
DC 2800/DC 1800
Ø 38mm max 10m
Ø 38mm max 10m
AirCube
*
*
*
*
*
Floor grinding
DCF Cyklon/DCF Wheel barrow
What is the difference between a vacuum cleaner and a dust collector?
The greatest difference is the degree of separation. Dust collectors are equipped with two filter systems while a dust cleaner most often only
has one. The filter system of the dust collector is built up with a fine filter and a micro filter. The combination of the two filters significantly
increases the degree of cleaning. The fine filter catches all but the smallest of particles (also the most dangerous), which are subsequently
removed by the micro filter.
All of Cramo's dust collectors are equipped with micro filters, providing a degree of separation of 99.995% (according to DOP testing).
62
www.cramo.com

Tools - Cramo

Transcription

Similar documents

CONTROLLED EXPANSION WATERSTOP

Millau Viaduct

Aithon A90H - Aithon Ricerche International

dimebag - Dean Guitars

chimney repairs - BEROA Deutschland GmbH

Corrosion of Steel in Concrete

Pentra-Sil 244+ - GLENSIL INDONESIA

pentra-sil® (ih) - Quest Building Products