446-457 Shotshell Reloading

Transcription

SHOTSHELL RELOADING
366 Auto Progressive
Shotshell Press
Just set the case and wad in place, pull the
handle, the 366 Auto does the rest. Solid
die-cast frame for long service. Features a
primer tube filler with an automatic primer
feed system, easy-empty powder and shot
hopper tubes with shut-off options, swing
out wad guide, full length resizing station and
automatic indexing with shell ejection. Primer
catcher included. Convert any 366 Auto
Shotshell Press to another gauge with the
addition of a die set.
Description .................. Product # .....Price
410 Bore 2-1/2”............................108-518 .......$659.99
28 Ga 2-3/4”...................................104-511 .......$549.99
20 Ga 2-3/4”...................................102-498 .......$549.99
20 Ga 2-3/4” w/Gas Assist .....315-113 .......$699.99
12 Ga 2-3/4”...................................101-097 .......$549.99
12 Ga 2-3/4” w/Gas Assist .....225-618 .......$699.99
Die Set .......................... Product # .....Price
28 Ga 2-3/4”...................................126-329 .......$232.99
20 Ga 2-3/4”...................................125-752 .......$199.99
12 Ga 2-3/4”...................................122-492 .......$199.99
Accessories ............................................................... Product # .....Price
Dust Cover...........................................................................................................113-483 ..........$19.49
Giant Capacity Shot and Powder Hopper 24”................................120-959 ..........$16.79
Replacement Powder and Shot Shut Off ...........................................114-920 ..........$34.99
Replacement Powder and Shot Baffle ..................................................116-416 ............ $9.39
Replacement Powder Measure Seal ......................................................132-021 ............ $1.99
Primer Shut Off .................................................................................................113-100 ..........$45.99
Primer Tube Filler ..............................................................................................120-172 ..........$16.29
Riser Legs (Set of 4)........................................................................................115-052 ..........$21.99
Spring Loaded Primer Seater ....................................................................127-402 ..........$31.49
Load-All 2 Single Stage
Shotshell Press
Unique in-line design with a large,
comfortable handle. Press includes
twenty-four shot and powder bushings
and both 6 and 8 point crimp starters for
creating custom loads. Optional primer
feeder sold separately.
Description ............................................................... Product # .....Price
20 Ga 2-3/4”, 3” ................................................................................................182-430 ..........$47.99
16 Ga 2-3/4”........................................................................................................750-550 ..........$47.99
12 Ga 2-3/4”, 3” ................................................................................................436-640 ..........$47.99
Conversion Kit .......................................................... Product # .....Price
20 Ga .......................................................................................................................693-856 ..........$20.49
16 Ga .......................................................................................................................878-163 ..........$20.49
12 Ga .......................................................................................................................324-170 ..........$20.49
Sizer Die .................................................................... Product # .....Price
20 Ga .......................................................................................................................825-950 ............ $3.89
16 Ga .......................................................................................................................612-669 ............ $3.89
12 Ga .......................................................................................................................123-904 ............ $3.89
Wad Guide ................................................................ Product # .....Price
20, 16 Ga ...............................................................................................................219-921 ............ $1.49
12 Ga .......................................................................................................................357-855 ............ $1.49
Primer Feeder.....................................................................................................188-662 ............ $9.99
Universal Charge Bar Kit ..............................................................................195-951 ..........$14.29
The Mini Grand Single
Stage Shotshell Press
This press features seven stations to crank out
up to 200 rounds per hour. It accepts RCBS,
Hornady or Ponsness Warren powder and
shot bushings. It features a taper crimp die to
improve feeding in semi-automatic shotguns,
and the large hopper holds 12-1/2 lbs of shot
and 1/2 lbs of powder. Press features 7 stations
with a non-rotating shell plate and is adjustable
for 2-3/4” or 3” hulls.
The Grand Progressive
Shotshell Press
The Grand is intended for the shotgunner
who requires accurate and precise
ammunition. Once in full operation, a
loaded shotshell is dispensed with each pull
of the handle. All the reloader does is insert
a hull at station one and put a wad in the
wad guide at station 4, automatic indexing
keeps the whole operation moving smoothly.
The automatic case-activated powder system
means there is no spillage. The powder
charging station is at the front of the press
making it easy to view the powder charge
and convenient to remove a hull to weigh
the charge. Hornady Powder Bushings may
also be used in the charge bar.
Description .................... Product # .....Price
20 Ga 2-3/4”, 3”..............................247-690 .......$139.99
Includes 7/8 oz #8 shot bushing and #381 powder bushing
12 Ga 2-3/4”, 3”, 3-1/2” .............443-293 .......$139.99
Includes 1-1/8 oz #7-1/2 shot bushing and #452 powder
bushing
Accessories .................... Product # .....Price
20 Ga Taper Crimp Die..............752-303 ..........$12.99
12 Ga Taper Crimp Die..............845-427 ..........$12.99
Dust Cover ........................................111-651 ..........$23.99
Steel Shot Conversion Kit.........995-438 ..........$16.29
Cowboy Brass Shotshell Die 12
Gauge
A 1-1/4”-12 thread die designed for use in a single stage press
with removable 7/8”-14 thread bushing. Includes die with roll
crimp, shellholder, decapping and capping unit for large rifle
primers. Complete tool set to load 12 gauge brass shotshells.
# 296-286......................................................................................................... $79.99
446
midwayusa.com
20 Ga 2-3/4”, 3” ................................................................................................872-576 .......$699.99
Includes 7/8 oz #8 shot bushing and #381 powder bushing
12 Ga 2-3/4”, 3” ................................................................................................234-380 .......$699.99
Includes 1-1/8 oz #7-1/2 shot bushing and #452 powder bushing
20 Ga Conversion Kit ....................................................................................100-886 .......$394.99
12 Ga Conversion Kit ....................................................................................101-071 .......$394.99
Dust Cover...........................................................................................................732-545 ..........$24.99
Riser Stand............................................................................................................184-725 ..........$32.99
1-800-243-3220
Since 1977
SHOTSHELL RELOADING
Sizemaster Single Stage Shotshell Press
Press features a “Power Ring” resizer
that returns bases to factory specification,
regardless of whether they’re brass or steel
heads, high or low base. Die sets to change
gauges are available (sold separately). E-Z
Prime primer feeder included on 28, 20, 16,
12 and 10 gauge models (not available for the
410 Bore).
Steelmaster Single Stage
Shotshell Press
Description ......... Product # .......... Price
410 Bore 2-1/2” ............. 447-397 ................$240.99
with 1/2 oz Charge Bar and 10, 11, 12 Powder Bushings
410 Bore 3” ...................... 450-005 ................$240.99
with 11/16 oz Charge Bar, 10, 11, 12 Powder Bushings
The Steelmaster is the only shotshell
reloader that is specifically designed
and equipped to load steel shotshells.
Press features the “Power Ring” collet
resizer (that returns every base to factory
specifications), cam-action crimping die
and spandex crimp starter (swivels to align
itself correctly with original shell creases).
This press comes shipped with E-Z Prime
primer feeder and will work equally well
loading lead shotshells (with lead shot
charge bar, sold separately).
28 Ga 2-3/4” .................... 446-938 ................$263.99
20 Ga 2-3/4”, 3”............. 441-414 ................$240.99
16 Ga 2-3/4” .................... 440-418 ................$263.99
with 1 oz Charge Bar, 23, 25, 29 Powder Bushings
12 Ga 2-3/4”, 3”............. 438-022 ................$240.99
with 1-1/8 oz Charge Bar, 29, 30, 32 Powder Bushings
10 Ga 3-1/2” .................... 434-879 ................$263.99
Die Sets ............... Product # .......... Price
410 Bore 2-1/2”, 3”...... 462-926 ................$108.99
28 Ga 2-3/4” .................... 462-717 ................$108.99
20 Ga 2-3/4”, 3”............. 459-129 ................$108.99
16 Ga 2-3/4” .................... 458-343 ................$108.99
12 Ga 2-3/4”, 3”............. 454-010 ................$108.99
10 Ga 3”, 3-1/2”............. 450-540 ................$125.99
Accessories ........................................................ Product # .......... Price
6” Bottle and Cap Set ......................................................................... 832-249 ..................... $6.99
12” Bottle and Cap Set ...................................................................... 834-436 ..................... $8.79
Bench Base Plate .................................................................................... 229-747 .................. $43.49
Bottle Support for Single Stage Presses ................................... 982-285 .................. $24.99
Collet Lubricant ...................................................................................... 899-236 ..................... $7.99
Deluxe Hull Spacer Bushing 12 Ga 1/4” Brass, per 2 ....... 570-682 .................. $32.49
Dust Cover................................................................................................ 866-280 .................. $24.99
Hull Spacer Bushing 20 Ga 1/4” Brass ....................................... 274-984 .................. $12.29
Powder Bottle Brass Washer, per 2 ............................................. 590-235 ..................... $0.99
Powder Bottle Grommet, per 2 .................................................... 470-243 ..................... $0.99
Press Maintenance Kit ......................................................................... 496-476 .................. $23.99
Short Kit: 12 Ga or 20 Ga 3” Presses to 2-3/4”................... 845-685 .................. $25.49
Short Kit: 12 Ga 3-1/2” Presses to 3” ........................................ 195-481 .................. $34.99
Short Kit: 10 Ga 3-1/2” Presses to 2-7/8” ............................... 557-151 .................. $27.49
12 Ga 3” Steel Shot Conversion Kit ........................................... 876-728 .................. $32.99
Snap-In Hull Spacer Bushing 12 Ga 1/4” Brass, per 3 ....... 171-203 .................. $25.99
12 Ga 3-1/2” Steel Shot Conversion and Extension Kit . 898-163 .................. $94.99
10 Ga 3-1/2” Steel Shot Conversion Kit .................................. 875-733 .................. $32.99
Description .............. Product # .....Price
12 Ga 2-3/4”, 3” .....................465-977 .......$274.99
12 Ga 3-1/2” ............................466-513 .......$286.99
10 Ga 3-1/2” ............................463-790 .......$286.99
6” Bottle and Cap Set ....................................................................................832-249 ............ $6.99
12” Bottle and Cap Set .................................................................................834-436 ............ $8.79
Bench Base Plate ...............................................................................................229-747 ..........$43.49
Bottle Support for Single Stage Presses ..............................................982-285 ..........$24.99
Collet Lubricant .................................................................................................899-236 ............ $7.99
Deluxe Hull Spacer Bushing 12 Ga 1/4” Brass, per 2 ..................570-682 ..........$32.49
Hull Spacer Bushing 20 Ga 1/4” Brass ..................................................274-984 ..........$12.29
Powder Bottle Brass Washer, per 2 ........................................................590-235 ............ $0.99
Powder Bottle Grommet, per 2 ...............................................................470-243 ............ $0.99
Press Maintenance Kit ....................................................................................496-476 ..........$23.99
Short Kit: 12 Ga or 20 Ga 3” Presses to 2-3/4”..............................845-685 ..........$25.49
Short Kit: 12 Ga 3-1/2” Presses to 3” ...................................................195-481 ..........$34.99
Short Kit: 10 Ga 3-1/2” Presses to 2-7/8” ..........................................557-151 ..........$27.49
Snap-In Hull Spacer Bushing 12 Ga 1/4” Brass, per 3 ..................171-203 ..........$25.99
12 Ga 3” Steel Shot Conversion Kit ......................................................876-728 ..........$32.99
12 Ga 3-1/2” Steel Shot Conversion and Extension Kit ............898-163 ..........$94.99
10 Ga 3-1/2” Steel Shot Conversion Kit .............................................875-733 ..........$32.99
600 Jr. Mark 5 Single Stage Shotshell Press
Easy, consistent operation and productivity of 6
to 8 boxes an hour. Accepts optional E-Z Prime
primer feed (sold separately). Die sets to change
gauges are available (sold separately).
Description .......................... Product # ... Price
410 Bore 2-1/2”........................................ 399-199 .... $182.99
410 Bore 3”................................................. 403-128 .... $182.99
28 Ga 2-3/4”............................................... 396-803 .... $182.99
20 Ga 2-3/4”, 3” ....................................... 396-593 .... $166.99
16 Ga 2-3/4”............................................... 392-796 .... $182.99
with 1 oz Charge Bar and 23, 25, 29 Powder Bushings
12 Ga 2-3/4”, 3” ....................................... 389-536 .... $166.99
with 1-1/8 oz Charge Bar and 29, 30, 32 Powder Bushings
10 Ga 3-1/2”............................................... 384-416 .... $182.99
with 2 oz Charge Bar and 37, 40, 44 Powder Bushings
Die Sets ................................ Product # ... Price
410 Bore 2-1/2”, 3” ................................ 430-755 .......$78.99
28 Ga 2-3/4”............................................... 419-979 .......$78.99
20 Ga 2-3/4”, 3” ....................................... 412-908 .......$78.99
16 Ga 2-3/4”............................................... 408-115 .......$78.99
12 Ga 2-3/4”, 3” ....................................... 404-855 .......$78.99
10 Ga 3”, 3-1/2” ....................................... 403-782 .......$78.99
Since 1977
Accessories .................................................... Product # ..... Price
6” Bottle and Cap Set ...................................................................832-249 .............$6.99
12” Bottle and Cap Set ................................................................834-436 .............$8.79
Bench Base Plate ..............................................................................229-747 .......... $43.49
Bottle Support for Single Stage Presses .............................982-285 .......... $24.99
Collet Lubricant ................................................................................899-236 .............$7.99
Deluxe Hull Spacer Bushing 12 Ga 1/4” Brass, per 2 .570-682 .......... $32.49
Hull Spacer Bushing 20 Ga 1/4” Brass .................................274-984 .......... $12.29
Powder Bottle Brass Washer, per 2 .......................................590-235 .............$0.99
Powder Bottle Grommet, per 2 ..............................................470-243 .............$0.99
Press Maintenance Kit ...................................................................496-476 .......... $23.99
Replacement Primer Seating Pad ...........................................112-143 .............$2.99
Replacement Primer Seating Spring .....................................648-380 .............$1.69
Short Kit: 12 Ga or 20 Ga 3” Presses to 2-3/4”.............845-685 .......... $25.49
Short Kit: 12 Ga 3-1/2” Presses to 3” ..................................195-481 .......... $34.99
Short Kit: 10 Ga 3-1/2” Presses to 2-7/8” .........................557-151 .......... $27.49
Snap-In Hull Spacer Bushing 12 Ga 1/4” Brass, per 3 .171-203 .......... $25.99
12 Ga 3” Steel Shot Conversion Kit .....................................876-728 .......... $32.99
12 Ga 3-1/2” Steel Shot Conversion
and Extension Kit (without Primer Trays) .......................892-702 .......... $71.99
12 Ga 3-1/2” Steel Shot Conversion and
Extension Kit (with Primer Trays) ........................................894-771 .......... $90.99
10 Ga 3-1/2” Steel Shot Conversion Kit ............................875-733 .......... $32.99
1-800-243-3220
midwayusa.com
447
SHOTSHELL RELOADING
8567N Grabber Progressive
Shotshell Press
Features ten different operations at six different
stations. The Auto-Cycle charging and three stage
crimp produce a finished shell with every pull
of the handle. The “Power Ring” resizer ensures
Make a loaded round with each pull of the handle, consistent sizing while the automatic indexing
this manual indexing press is perfect for reloaders automatically moves the hull to the next station.
The operator simply puts in a wad and hull,
who inspect and resize their cases as a separate
then removes a loaded shell with each pull of
operation. This press does not resize shells - use
the handle. E-Z Prime primer feeder included.
the optional MEC-Super Sizer for this operation
Additional die sets to change gauges are not
(sold separately). Three crimping stations ensure
available.
shell consistency for proper feeding. E-Z Prime
primer feeder included. Additional die sets to
Description .......................... Product # ... Price
410 Bore 2-1/2”........................................ 488-617 .... $479.99
change gauges are not available.
650N Progressive Shotshell
Press
Description .......................... Product # ... Price 28 Ga 2-3/4”............................................... 488-040 .... $479.99
410 Bore 2-1/2”........................................ 474-239 .... $332.99 with 3/4 oz Charge Bar, 14, 16, 21 Powder Bushings
20 Ga 2-3/4”............................................... 487-503 .... $437.99
28 Ga 2-3/4”............................................... 472-302 .... $332.99 with 7/8 oz Charge Bar, 20, 22, 24 Powder Bushings
16 Ga 2-3/4”............................................... 483-824 .... $479.99
20 Ga 2-3/4”............................................... 472-052 .... $303.99 with 1 oz Charge Bar, 23, 25, 29 Powder Bushings
12 Ga 2-3/4”............................................... 480-237 .... $437.99
16 Ga 2-3/4”............................................... 467-928 .... $332.99 with 1-1/8 oz Charge Bar, 29, 30, 32 Powder Bushings
Accessories .......................... Product # ... Price
12 Ga 2-3/4”............................................... 466-528 .... $303.99 6” Bottle and Cap Set ........................... 832-249 ..........$6.99
12” Bottle and Cap Set ........................ 834-436 ..........$8.79
Accessories .......................... Product # ... Price Bench Base Plate ...................................... 229-747 .......$43.49
6” Bottle and Cap Set ........................... 832-249 ..........$6.99 Bottle Support for
12” Bottle and Cap Set ........................ 834-436 ..........$8.79 Progressive Presses.............................. 172-344 .......$25.49
Bench Base Plate ...................................... 229-747 .......$43.49 Collet Lubricant ........................................ 899-236 ..........$7.99
Dust Cover.................................................. 866-280 .......$24.99
Bottle Support for
Progressive Presses.............................. 172-344 .......$25.49 Powder Bottle Brass Washer, per 2. 590-235 ..........$0.99
Collet Lubricant ........................................ 899-236 ..........$7.99 Powder Bottle Grommet, per 2 ...... 470-243 ..........$0.99
E-Z Load Handle
E-Z Load Handle For
Progressive Presses.............................. 814-611 .......$10.29 For Progressive Presses..................... 814-611 .......$10.29
Powder Bottle Brass Washer, per 2. 590-235 ..........$0.99 Auto-Mate Shotshell
Powder Bottle Grommet, per 2 ...... 470-243 ..........$0.99 Press Power Unit .................................. 873-749 .... $629.99
Press Maintenance Kit ........................... 496-476 .......$23.99 Press Maintenance Kit ........................... 496-476 .......$23.99
9000GN Progressive Shotshell
Press
The 9000GN features automatic indexing and
shell ejection preset by the factory. Press performs
ten operations at six stations at once and with every
stroke a reloaded shell is completed. E-Z Prime
primer feeder included. Additional die sets to
change gauges are not available.
Description .......................... Product # ....Price
410 Bore 2-1/2”........................................ 510-011 .....$585.99
28 Ga 2-3/4”............................................... 507-079 .....$585.99
20 Ga 2-3/4”............................................... 506-214 .....$534.99
16 Ga 2-3/4”............................................... 505-468 .....$585.99
12 Ga 2-3/4”............................................... 495-346 .....$534.99
Accessories .......................... Product # ....Price
6” Bottle and Cap Set ........................... 832-249 ...........$6.99
12” Bottle and Cap Set ........................ 834-436 ...........$8.79
Bench Base Plate ...................................... 229-747 ........$43.49
Bottle Support for
Progressive Presses.............................. 172-344 ........$25.49
Collet Lubricant ........................................ 899-236 ...........$7.99
Dust Cover.................................................. 866-280 ........$24.99
Powder Bottle Brass Washer, per 2. 590-235 ...........$0.99
Powder Bottle Grommet, per 2 ...... 470-243 ...........$0.99
E-Z Load Handle
For Progressive Presses..................... 814-611 ........$10.29
Auto-Mate Shotshell
Press Power Unit .................................. 873-749 .....$629.99
Press Maintenance Kit ........................... 496-476 ........$23.99
Includes anti-seize lubricant, cleaning pick, cleaning brush, column Includes anti-seize lubricant, cleaning pick, cleaning brush, column Includes anti-seize lubricant, cleaning pick, cleaning brush, column
spring lifter and closure nut wrench
12 Ga 2-3/4” Steel Shot
Conversion Kit ....................................... 884-245 ........$47.99 Conversion Kit ....................................... 884-245 ........$47.99 Conversion Kit ....................................... 884-245 ........$47.99
448
midwayusa.com
1-800-243-3220
Since 1977
SHOTSHELL RELOADING
Baseboard with Quick Change
Mounting Brackets for MEC
Shotshell Presses
Oak baseboard and Quick Change mounting
brackets allow the reloader to reload shotshells
on any surface. Clamp it to a work bench or
counter with C-clamps for extra support. Features
1/4” channels to collect excess powder and shot.
Dimensions are 16” x 19” x 3/4”.
Bracket
Description ......... Distance .. Product # ..Price
Junior and 650 Press ..........4”.................157-101..... $45.99
Grabber and Sizemaster
Press (Pictured) .................7”.................118-424..... $45.99
Quick Change Knobs
9000E Electronic Progressive 9000HN Hydraulic Progressive
Shotshell Press
Shotshell Press
Press has the same features as the 9000GN,
including automatic indexing and shell ejection,
ten operations at six stations, E-Z Prime primer
feeder and a completed shell with every stroke,
but has the addition of the MEC Auto Mate that
electronically operates the press by pushing two
control buttons. Additional die sets to change
gauges are not available.
Six station press with hydraulic functions
controlled by a foot pedal leaving the operator’s
hands free. Hydraulic pump operates on standard
110 Volt current. E-Z Prime primer feeder
included. Additional die sets to change gauges are
not available.
Description ............................Product # ..Price
410 Bore 2-1/2”...........................................518-273 ...$989.99
Description ..........................Product # ....Price with 1/2 oz Charge Bar, 10, 11, 12, Powder Bushings
410 Bore .......................................................217-970......$979.99 28 Ga 2-3/4”..................................................516-663 ...$989.99
Knurled aluminum knobs are designed
to replace the front stop screw and
spring anchor bolt on a 9000G or H,
8567 Grabber or a 650 charge bar for
quick, tool-free bushing changes. Cuts
changing time in half.
Description ........................... Product # .. Price
Charge Bar Knob .......................................237-416.........$9.19
Spring Anchor Charge Bar Knob ......643-095.........$9.19
Quick Change
Mounting
Brackets
with 1/2 oz Charge Bar, 10, 11, 12 Powder Bushings, Auto-Mate with 3/4 oz Charge Bar, 14, 16, 21 Powder Bushings
Unit and Primer Feed
20 Ga 2-3/4”..................................................516-204 ...$959.99
28 Ga ..............................................................562-931......$979.99 with 7/8 oz Charge Bar, 20, 22, 24 Powder Bushings
with 3/4 oz Charge Bar, 14, 16, 21 Powder Bushings, Auto-Mate 16 Ga 2-3/4”..................................................514-921 ...$989.99 1”x 1/2”x 8” aluminum
brackets allow removal and
20 Ga ..............................................................149-743......$949.99 12 Ga 2-3/4”..................................................514-267 ...$959.99 replacement of a MEC press
with 7/8 oz Charge Bar, 20, 22, 24 Powder Bushings, Auto-Mate with 1-1/8 oz Charge Bar, 29, 30, 32 Powder Bushings
with another similar model
Accessories ............................Product # ..Price
16 Ga ..............................................................139-498......$979.99 6” Bottle and Cap Set ..............................832-249 .........$6.99 in seconds. MEC JR Mark 5
with 1 oz Charge Bar, 23, 25, 29 Powder Bushings, Auto-Mate
and MEC 650 4” base width
12” Bottle and Cap Set ...........................834-436 .........$8.79
are interchangeable as are
Bench
Base
Plate
.........................................229-747
......$43.49
12 Ga ..............................................................195-293......$949.99
the MEC Grabber, 9000G
Bottle Support
with 1-1/8 oz Charge Bar, 29, 30, 32 Powder Bushings, Autofor Progressive Presses .........................172-344 ......$25.49 and MEC Sizemaster 7”
Mate Unit and Primer Feed
Collet Lubricant ...........................................899-236 .........$7.99 base width. Screw or bolt
Dust Cover.....................................................866-280 ......$24.99 down brackets, then finger
Auto-Mate
Powder Bottle Brass Washer, per 2 ..590-235 .........$0.99 loosen two Allen bolts on each side. Remove and
Shotshell Press
Powder Bottle Grommet, per 2 .........470-243 .........$0.99 replace the press, and finger tighten the bolts.
E-Z Load Handle
Eliminates the bench space required for multiple
Power Unit
For Progressive Presses........................814-611 ......$10.29
Press Maintenance Kit ..............................496-476 ......$23.99 presses. Removing the press permits easy access
Converts a manuallyIncludes anti-seize lubricant, cleaning pick, cleaning brush, column for cleaning and adjustments or yields added
operated 9000G series or 8567 Grabber series to
work space when the press is not in use. No tools
electric operation. Two operation buttons take the
required for changing.
arm work out of reloading. 110 volt.
# 419-776.............................................................................. $24.99
# 873-749............................................................................$629.99
Since 1977
1-800-243-3220
midwayusa.com
449
SHOTSHELL RELOADING
Powder Bushings
450
Hornady
573-743
202-478
204-875
692-340
211-395
213-254
733-174
215-534
215-743
219-120
249-086
223-586
229-988
230-106
235-108
242-834
245-230
245-884
247-167
128-949
247-836
254-566
256-543
261-203
179-397
269-885
270-881
276-118
277-860
279-260
280-911
287-640
289-460
293-179
300-368
310-842
311-222
312-100
313-291
316-341
317-010
317-547
321-880
324-813
326-882
130-945
330-469
333-193
333-862
344-847
346-130
348-971
Hornady
176-556
177-574
177-903
178-320
178-743
183-286
183-404
184-972
189-270
190-802
191-129
192-279
195-267
202-152
Hornady
166-052
166-261
167-244
168-775
171-017
167-298
171-171
168-238
175-351
Price
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
Price
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
Price
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
$5.19
midwayusa.com
RCBS
111-090
115-882
162-145
163-118
178-668
187-235
187-586
195-465
199-567
213-181
242-932
294-222
325-853
341-687
361-338
363-252
363-275
372-860
374-798
381-964
404-035
427-998
451-961
463-966
501-389
537-792
579-034
596-290
630-352
638-506
691-706
693-161
RCBS
712-332
765-096
767-492
775-623
780-415
794-334
RCBS
805-374
888-343
882-561
831-756
862-426
825-027
843-738
Price
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
Price
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
Price
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
$6.89
This quick-change charge bar is made from anodized
aluminum and is for use with a removable
powder charge bushing (sold separately) to
adjust powder charges. Features a soft insert
to avoid shearing larger or hard shot. Lead and
Steel Shot charge bars are not interchangeable.
SINGLE STAGE
Bushing
#250
#256
#266
#272
#291
#300
#303
#309
#318
#327
#330
#336
#345
#354
#360
#366
#372
#381
#390
#393
#396
#402
#408
#414
#417
#420
#423
#426
#429
#432
#435
#438
#441
#444
#447
#450
#453
#456
#459
#462
#465
#468
#471
#474
#480
#483
#486
#489
#498
#507
#516
#525
Field Load
1/2 oz #6 Shot
5/8 oz #6 Shot
11/16 oz #6 Shot
3/4 oz #6 Shot
7/8 oz #6 Shot
1 oz #6 Shot
1-1/8 oz #6 Shot
1-1/4 oz #6 Shot
1-3/8 oz #6 Shot
1-1/2 oz #6 Shot
1-5/8 oz #6 Shot
1-3/4 oz #6 Shot
1-7/8 oz #6 Shot
2-1/8 oz #6 Shot
Target Load
1/2 oz #9 Shot
3/4 oz #9 Shot
7/8 oz #9 Shot
1-1/8 oz #9 Shot
1-1/8 oz #8-1/2 Shot
1 oz #8 Shot
1-1/8 oz #8 Shot
1 oz #7-1/2 Shot
1-1/8 oz #7-1/2 Shot
Charge Bars
Lead Shot
1/2 oz
5/8 oz
11/16 oz
3/4 oz
7/8 oz
1 oz
1-1/8 oz
1-3/16 oz
1-1/4 oz
1-3/8 oz
1-1/2 oz
1-5/8 oz
1-3/4 oz
1-7/8 oz
2 oz
2-1/4 oz
Skeet Special Lead Shot
1/2 oz
3/4 oz
7/8 oz
1 oz
1-1/8 oz
Steel Shot
7/8 oz #5 and #6 Shot
7/8 oz #1 to #4 Shot
1 oz #3 to #6 Shot
1 oz BB to #2 Shot
1-1/8 oz #4 to #6 Shot
1-1/8 oz BB to #3 Shot
1-1/4 oz #3 to #6 Shot
1-3/8 oz #3 to #6 Shot
1-1/2 oz #3 to #6 Shot
Product #
653-034
656-831
657-290
661-297
663-366
674-142
674-220
674-352
674-679
675-425
675-962
684-668
688-061
690-666
690-744
693-927
Product #
700-329
703-380
705-986
707-386
709-246
Product #
751-670
751-329
752-861
751-788
759-473
755-467
760-914
760-260
763-193
762-446
764-056
763-847
Price
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
Price
$13.49
$13.49
$13.49
$13.49
$13.49
Price
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
PROGRESSIVE
These interchangeable charge bushings are designed so shot and powder
bushings cannot be accidentally reversed in the charge bar. Machined from
solid bar stock. It is also suggested that you purchase one bushing above and
one below your target weight to achieve the closest desired load.
Lead Shot
1/2 oz
5/8 oz
11/16 oz
3/4 oz
7/8 oz
1 oz
1-1/8 oz
1-3/16 oz
1-1/4 oz
1-3/8 oz
1-1/2 oz
1-5/8 oz
1-3/4 oz
1-7/8 oz
Skeet Special Lead Shot
1/2 oz
3/4 oz
7/8 oz
1 oz
1-1/8 oz
Steel Shot
7/8 oz #1 to #4 Shot
7/8 oz #5 and #6 Shot
1 oz #3 to #6 Shot
1 oz BB to #2 Shot
1-1/8 oz #4 to #6 Shot
1-1/4 oz #3 to #6 Shot
Product #
709-455
710-319
711-969
713-042
715-648
718-582
718-831
720-768
721-305
721-437
725-770
729-030
735-014
739-152
Product #
744-481
745-999
747-741
748-528
751-211
Product #
764-920
766-453
767-644
767-107
775-369
770-786
779-166
775-906
Price
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
$13.49
Price
$13.49
$13.49
$13.49
$13.49
$13.49
Price
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
$17.79
Powder Bushing Rack
Steel rack with the capacity to hold 10 MEC powder
bushings. Mount it to the bench or leave it freestanding. Red.
# 549-374 ............................................................................................$17.79
1-800-243-3220
Since 1977
SHOTSHELL RELOADING
Super-Sizer
Powder Bushing
Eight steel fingers resize the base back
to original dimensions. Contains MEC’s
exclusive Power-Ring collet sizing device.
Accepts all shotshell lengths.
Bushing works with both single
stage and progressive charge bars.
Bushing ........Product # ....... Price
#7 ...............................518-928 .................$3.99
#8 ...............................520-251 .................$3.99
#9 ...............................521-324 .................$3.99
#10 ............................524-507 .................$3.99
#11 ............................524-716 .................$3.99
#12 ............................524-926 .................$3.99
#12A ........................527-112 .................$3.99
#13 ............................528-722 .................$3.99
#13A ........................533-306 .................$3.99
#14 ............................535-570 .................$3.99
#15 ............................542-222 .................$3.99
#16 ............................544-042 .................$3.99
#17 ............................548-952 .................$3.99
#18 ............................549-411 .................$3.99
#19 ............................549-620 .................$3.99
#20 ............................554-741 .................$3.99
#21 ............................557-673 .................$3.99
#22 ............................559-283 .................$3.99
#23 ............................560-489 .................$3.99
#24 ............................562-334 .................$3.99
#25 ............................563-617 .................$3.99
#26 ............................583-441 .................$3.99
#27 ............................586-584 .................$3.99
#28 ............................588-771 .................$3.99
#29 ............................597-033 .................$3.99
Bushing ........Product # ....... Price
#30 ............................597-360 .................$3.99
#31 ............................599-507 .................$3.99
#32 ............................599-717 .................$3.99
#33 ............................604-626 .................$3.99
#34 ............................611-161 .................$3.99
#35 ............................613-884 .................$3.99
#36 ............................614-212 .................$3.99
#37 ............................616-490 .................$3.99
#38 ............................624-084 .................$3.99
#38A ........................625-943 .................$3.99
#39 ............................629-740 .................$3.99
#39A ........................629-872 .................$3.99
#40 ............................631-600 .................$3.99
#40A ........................634-323 .................$3.99
#41 ............................634-742 .................$3.99
#41A ........................635-201 .................$3.99
#42 ............................636-392 .................$3.99
#42A ........................637-715 .................$3.99
#43 ............................643-791 .................$3.99
#43A ........................644-655 .................$3.99
#44 ............................645-191 .................$3.99
#44A ........................645-309 .................$3.99
#45 ............................647-915 .................$3.99
#45A ........................650-311 .................$3.99
#46 ............................650-521 .................$3.99
EZ Fill Funnel
Fits securely over bottles for easy, mess-free filling.
# 444-752 ........................................................................................ $7.99
Description ................ Product # .....Price
410 Bore .......................................799-292 ..........$98.99
28 Ga ..............................................790-611 ..........$98.99
20 Ga ..............................................796-477 ..........$89.99
16 Ga ..............................................786-029 ..........$98.99
12 Ga ..............................................784-954 ..........$89.99
10 Ga ..............................................782-021 ..........$98.99
E-Z Prime Automatic
Primer Feed
Eliminate handling individual primers with a
completely automatic primer feed. Fits MEC
shotshell presses.
Single Stage Presses .... Product # .....Price
28 Ga...................................................829-434 ..........$47.99
20 Ga...................................................828-857 ..........$47.99
16 Ga...................................................826-384 ..........$47.99
12 Ga...................................................825-715 ..........$47.99
10 Ga...................................................817-911 ..........$47.99
Progressive Presses...... Product # .....Price
12 Ga to 410 Bore ......................829-853 ..........$51.99
Collet Lubricant
The handy tube applicator works well for the resizing collet
and other working parts. A few drops will make resizing much
smoother and will reduce wear on your press. 0.88 oz (25 g).
# 899-236.........................................................................................................................$7.99
Shotshell Checker
Powder Bushing Converter
This stainless steel tool checks reloaded
shells to ensure that they will chamber
and feed safely. Consists of holes labeled
“GO” and “NO GO” to test for size and
roundness. For use with 410 bore, 28, 20, 16,
12 and 10 gauge.
# 814-402...........................................................................................................................................$14.29
Fits RCBS Grand, Mini Grand, Hornady or any model Ponsness Warren
press. Allows use of the MEC bushings.
# 633-400............................................................................................................................................. $7.99
Neatly stacks 25 loaded shells in preparation for
filling cardboard boxes in one easy step.
Large Capacity
Primer Feed Kit
This replacement primer feed tray holds more than 200
primers for extended reloading sessions. Self-lubricating tray
pivots flat for easy filling.
# 976-788...........................................................................................................................................$59.99
Wad Guide Finger
Don’t allow a broken wad finger to shut
down shotshell reloading. Keep a spare or
two on the reloading bench.
$2.49
Since 1977
E-Z Pack Shotshell Stacker
Description ........................ Product # .....Price
410 Bore ...................................................810-146 ..........$12.99
28 Ga ..........................................................809-609 ..........$12.99
20 Ga ..........................................................805-066 ..........$12.99
16 Ga ..........................................................801-479 ..........$12.99
12 Ga (Pictured) ...................................800-274 ..........$12.99
Single Stage Presses ....... 410 Bore ......28 Ga .........20 Ga .........16 Ga ........ 12 Ga......... 10 Ga
Size Master ........................................... 864-537 ..........138-180 ........... 142-603 ...........679-772 ..........235-944 ...........634-854
Steel Master ......................................... 864-537 ...............N/A .....................N/A.....................N/A ...............235-944 ...........634-854
600 Jr (pre-1982) ............................. 864-537 ..........858-672 ........... 857-021 ...........848-432 ..........839-633 ...........837-119
600 Jr (1982-1985) ......................... 780-580 ..........138-180 ........... 142-603 ...........679-772 ..........235-944 ...........634-854
600 Jr Mark 5 ...................................... 780-580 ..........138-180 ........... 142-603 ...........679-772 ..........235-944 ...........634-854
700 Versamec (pre-1982) ........... 864-537 ..........858-672 ........... 857-021 ...........848-432 ..........839-633 ...........837-119
Versamec (1982-1985) ................. 780-580 ..........138-180 ........... 142-603 ...........679-772 ..........235-944 ...........634-854
Progressive Presses......... 410 Bore ......28 Ga .........20 Ga .........16 Ga ........ 12 Ga......... 10 Ga
650 ............................................................ 864-537 ..........138-180 ........... 142-603 ...........679-772 ..........235-944 ...............N/A
76 Series Grabber............................ 864-537 ..........138-180 ........... 142-603 ...........679-772 ..........235-944 ...............N/A
8567N ..................................................... 864-537 ..........138-180 ........... 142-603 ...........679-772 ..........235-944 ...............N/A
9000G, GN .......................................... 864-537 ..........138-180 ........... 142-603 ...........679-772 ..........235-944 ...............N/A
9000H, HN .......................................... 864-537 ..........138-180 ........... 142-603 ...........679-772 ..........235-944 ...............N/A
1-800-243-3220
midwayusa.com
451
SHOTSHELL RELOADING
D-Loader Shotshell Dismantler
Crimp Starter
Designed to safely dismantle a mis-loaded
shotshell to reclaim shot, wad and powder. Works
for 410 Bore, 28, 20, 16, 12 and 10 gauge. Wood
construction. Replacement blades are sold in a package of 3.
Designed for use with the
Hornady 336 press, this crimp
starter accepts all types of
shotshell hulls.
28 Ga ......................................................................... Product # .....Price
6-Point .....................................................................................................................150-483 ............ $5.49
20 Ga ......................................................................... Product # .....Price
6-Point .....................................................................................................................147-013 ............ $5.49
8-Point .....................................................................................................................145-996 ............ $5.49
12 Ga ......................................................................... Product # .....Price
Paper ........................................................................................................................142-221 ............ $5.49
6-Point .....................................................................................................................141-321 ............ $5.49
8-Point .....................................................................................................................140-284 ............ $5.49
Package of 3 (Paper, 8-Point, 6-Point) ...................................................233-441 ..........$12.99
Wad Guide Finger
Plastic spring finger holds the case mouth open
to easily insert wads.
Description .................................................. Qty...... Product # .....Price
410 Bore ............................................................................................2.................165-188 ............ $4.29
28 Ga ...................................................................................................2.................164-575 ............ $4.29
20 Ga ...................................................................................................2.................164-365 ............ $4.29
12 Ga ...................................................................................................2.................161-796 ............ $4.29
10 Ga ...................................................................................................2.................160-032 ............ $4.29
Dismantler ............................................................................................................712-998 ..........$20.49
Replacement Blades. .......................................................................................195-391 ............ $5.29
Roll Crimper
Roll crimped shells provide improved performance for
almost any load type. Roll crimps allow room for large
payloads and may be used on new hulls for an extra
clean look. The ExactaRoll Double-Pin Roll Crimper has two resistance
rollers that make it one of the most efficient roll crimpers designed. The
double-pin design allows the hand loader greater control over the crimp
allowing them to create a tighter seal and make roll crimps in less time. For
use in an electric drill or drill press.
Description .. Product # ....Price
410 Bore ...................256-666........$31.49
28 Ga ..........................118-871........$31.49
20 Ga ..........................752-783........$31.49
16 Ga ..........................749-390........$31.49
Description .. Product # ....Price
12 Ga ..........................730-142........$31.49
12 Ga ..........................599-043........$39.99
ExactaRoll Double-Pin Roll Crimper
10 Ga ..........................712-427........$31.49
Adjustable Shot Dipper
Telescoping cup adjusts from 7/8 to 1-7/8 oz.
Calibrated for lead shot.
# 246-397....................................................................................................................... $3.99
Powder Baffle
One-piece injection molded plastic baffle will help
maintain a consistent powder charge in the bushing. Sits
inside the powder tube above the charge bar. Can also be
used in the shot tube to keep lead weight off of the charge bar.
Shotshell Stamp Set
Easy and professional way to identify
shotshells by stamping the ends or side. Ink
sticks to metal, plastic or paper and dries
within 1 minute
Hornady and Pacific Presses ......................................................................171-197 ............ $3.79
MEC Presses ........................................................................................................788-046 ............ $6.29
Universal Charge Bar
Stamp Set .....................Product # ...Price
#9, #8, #7-1/2, #7 Shot .......... 140-137 ........$16.99
#6, #5, #4, #3, #2, #1 Shot.. 298-596 ........$23.99
Industrial Ink ................Product # ...Price
4 oz Bottle ....................................... 198-067 ........$12.99
Pad .......................................................547-623 .......... $5.99
Multi-Scale
The zinc die-cast Universal Charge
Bar is fully adjustable for any gauge,
from 1/2 oz to 2-1/4 oz for lead
shot, 7/8 to 1-1/2 oz steel shot and
12 to 55 grains of powder. The shot
cavity can easily be adjusted to compensate for different shot sizes and shot
quantities in order to get the exact loads you want. A powder baffle is also
included.
Primer Pocket
Cleaner
Single Stage Presses (600 Jr, Sizemaster) .............................................746-153 ..........$40.99
Progressive Presses (650, Grabber, 9000) ..........................................245-752 .........$40.99
Quick Check
Choke Gage
Powder Baffle
Provides even powder flow for consistent charges.
Spring-loaded for a tight powder seal. Fits all MEC
shotshell presses.
# 393-396...........................................................................................................................................$16.29
452
midwayusa.com
Sizes and conditions primer pockets on 410 Bore, 28 Gauge and 20 Gauge
shotshell hulls. A must have tool for Cheddite 28 Gauge hulls and other
hulls that “drop” the primer after repeated firings.
# 516-429...........................................................................................................................................$22.99
Older shotguns and some vintage models with fixed tubes make it difficult
to determine what the correct choke is. This gage eliminates the guessing
game and can be used on 410 Bore, 28, 20, 16, 12 and 10 gauge shotguns.
Stainless steel.
# 819-838...........................................................................................................................................$11.29
1-800-243-3220
Since 1977
SHOTSHELL RELOADING
Shotshell Hull Vise
Trim Doctor Shotshell Hull
Trimming Tool with Exacta Trim
Makes old shells like new. Worn-out crimps are
trimmed off leaving a like-new crimp edge. 3-1/2”
shells can be turned into 3” shells and 3” shells can
be turned into 2-3/4” shells. Shells are held in perfect alignment producing
sharp edges. Blades can be replaced by using standard heavy-duty utility
knife blades. Can also be used as a shell disassembly tool. For use with 20,
16, 12 and 10 gauge hulls with appropriate bushing.
Tool with
Bushing .......Product # .... Price
12 Ga .........................686-341 .........$31.99
10 Ga .........................915-841 .........$31.99
Bushing .........Product # .... Price
20 Ga .........................525-119 ............$4.99
16 Ga .........................864-432 ............$4.99
12 Ga .........................418-955 ............$4.99
The Spin Doctor Shotshell Hull
Conditioning Tool
When used with an electric drill, the Spin Doctor gently
reconditions crimped or damaged shotgun hulls with heat
created by friction. To eliminate hull-mouth problems,
condition all hulls before loading the first time.
Description ......................................... Product # .....Price
410 Bore, 28 Ga, 20 Ga ..............................................735-207 ..........$21.99
20 Ga, 16 Ga, 12 Ga .....................................................763-309 ..........$21.99
Made of quality machined parts,
this vise is fully adjustable to
securely hold any 12, 16 or 20
gauge shotshell hull for specialized
operations.
Vise ...........................................................................................................................757-116 ..........$49.99
Blocks ........................................................................ Product # .....Price
410 Bore, 28 Ga ................................................................................................727-294 ..........$10.79
20, 16, 12 Ga .......................................................................................................564-555 ..........$10.79
Super Crown Crimp Starter for
MEC Presses
Made from machined solid brass, this crimp starter will
fold hard unskived plastic hulls into crisp star crimps.
410 Bore, 28, 20 Ga.................................. Material.. Product # .....Price
6-Point ............................................................................................ Brass ............113-528 ..........$32.49
8-Point ............................................................................................ Brass ............674-826 ..........$32.49
16, 12, 10 Ga ............................................. Material.. Product # .....Price
6-Point ............................................................................................ Brass ............789-996 ..........$32.49
8-Point ............................................................................................ Brass ............640-006 ..........$32.49
Shotshell Hulls
410 Bore
Length
2-1/2”
2-1/2”
3”
Length
2-1/2”
Length
2-3/4”
2-3/4”
2-3/4”
Length
2-1/2”
Length
2-3/4”
2-3/4”
2-3/4”
2-3/4”
2-3/4”
3”
3”
Length
2-3/4”
2-3/4”
2-3/4”
2-3/4”
Length
2-1/2”
2-1/2”
2-3/4”
2-3/4”
2-3/4”
2-3/4”
2-3/4”
3”
3”
3”
3-1/2”
Length
3-1/2”
3-1/2”
3-1/2”
32 Ga
28 Ga
24 Ga
20 Ga
16 Ga
12 Ga
10 Ga
Brand
BPI
Magtech
BPI
Brand
Magtech
Brand
BPI
Fiocchi
Magtech
Brand
Magtech
Brand
BPI
BPI
Fiocchi
Fiocchi
Magtech
BPI
Fiocchi
Brand
BPI
BPI
Fiocchi
Magtech
Brand
Magtech
Magtech
BPI
BPI
BPI
BPI
Fiocchi
BPI
Federal
Fiocchi
Federal
Brand
Federal
Federal
Remington
This is not loaded ammunition.
Hull Type
Multi-Hull Primed, Skived
Brass, Unprimed
Hull Type
Brass, Unprimed
Hull Type
Primed
Brass, Unprimed
Hull Type
Brass, Unprimed
Hull Type
Rio Primed High Brass
Primed, Low Brass
Primed, Skived
Brass, Unprimed
Primed, Skived
Hull Type
Primed
Brass, Unprimed
Hull Type
Brass, Unprimed
Brass, Unprimed
Rio Primed Low Brass
Rio Primed Super Low
Primed, Skived
Primed
Primed, Unskived
Primed
Hull Type
Primed, Skived
Primed, Skived
Unprimed, Skived
Color
Red
Brass
Red
Color
Brass
Color
Red
Red
Brass
Color
Brass
Color
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
Color
Green
Clear
Red
Brass
Color
Brass
Brass
Clear
Black
Clear
Blue
Clear
Green
*
*
Red
Color
Brown
Brown
Brown
Qty
100
25
100
Qty
25
Qty
100
100
25
Qty
25
Qty
100
100
100
100
25
100
100
Qty
100
100
100
25
Qty
25
250
100
100
100
100
100
100
100
100
50
Qty
100
50
100
Product #
159-965
151-679
992-132
Product #
119-743
Product #
513-815
493-146
679-947
Product #
195-393
Product #
164-875
112-918
918-714
613-806
860-921
194-798
616-202
Product #
843-635
587-870
335-032
474-364
Product #
554-245
617-690
112-224
846-914
216-861
769-310
572-914
627-433
153-622
598-355
718-090
Product #
345-676
536-084
128-152
Price
$19.49
$26.99
$21.49
Price
$26.99
Price
$21.49
$17.99
$26.99
Price
$26.99
Price
$18.49
$13.99
$15.79
$16.99
$26.99
$19.49
$17.99
Price
$18.99
$13.99
$16.99
$26.99
Price
$26.99
$241.99
$16.99
$12.49
$12.49
$11.99
$15.99
$18.49
$26.99
$16.99
$20.99
Price
$45.99
$25.99
$53.99
* Color may vary
!
NOTE: Once-fired hulls may display slight imperfections, but most flaws will quickly disappear in the reloading process.
Inventory and specifications are subject to availability.
Since 1977
1-800-243-3220
midwayusa.com
!
453
SHOTSHELL RELOADING
Shotshell Wads
Gauge
410 Bore
28 Ga
20 Ga
16 Ga
12 Ga
454
Charge Weight
1/2 oz
1/2 oz
1/2 oz
1/2 oz
1/2 oz
1/2 oz
1/2 to 11/16 oz
1/2 to 11/16 oz
3/4 oz
3/4 oz
3/4 oz
3/4 oz
3/4 oz
3/4 oz
3/4 to 7/8 oz
5/8 to 3/4 oz
5/8 to 3/4 oz
7/8 to 1 oz
3/4 to 7/8 oz
7/8 oz
7/8 oz
7/8 oz
7/8 oz
7/8 oz
7/8 to 1 oz
7/8 to 1 oz
7/8 to 1 oz
7/8 to 1-1/8 oz
7/8 to 1-1/4 oz
1 oz
7/8 to 1 oz
1 oz
1-1/8 oz
7/8 oz
7/8 oz
7/8 oz
7/8 oz
7/8 oz
7/8 to 1 oz
7/8 to 1-1/8 oz
7/8 to 1-1/8 oz
7/8 to 1-1/8 oz
1 oz
1 oz
1 oz
1 oz
1 oz
1 oz
1 oz
1 oz
1 oz
1 oz
1 oz
1 to 1-1/8 oz
1 to 1-1/8 oz
1 to 1-1/8 oz
1 to 1-1/8 oz
1 to 1-1/4 oz
1 to 1-1/4 oz
1 to 1-5/8 oz
1 to 1-5/8 oz
1-1/8 to 1-3/8
1-1/8 to 1-1/4 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/4 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
1-1/8 oz
Brand
BPI
Claybuster
Downrange
Federal
Remington
Winchester
BPI
BPI
Claybuster
Claybuster
Downrange
Federal
Remington
Winchester
BPI
BPI
BPI
BPI
BPI
BPI
BPI
Claybuster
Downrange
Remington
BPI
BPI
Federal
BPI
Winchester
Remington
BPI
BPI
Remington
BPI
BPI
Claybuster
Downrange
Winchester
BPI
BPI
BPI
BPI
BPI
Claybuster
Claybuster
Claybuster
Claybuster
Downrange
Downrange
Downrange
Federal
Remington
Remington
BPI
BPI
BPI
Winchester
BPI
BPI
Winchester
Winchester
BPI
BPI
BPI
BPI
Claybuster
Claybuster
Claybuster
Claybuster
Claybuster
Claybuster
Claybuster
Downrange
Downrange
Downrange
Downrange
Downrange
Downrange
Downrange
Downrange
Federal
Remington
midwayusa.com
Wad Type
Magnum Four-Ten
CB5050-410HS (Replaces WAA410HS)
Pattern Control
410SC (1-Piece Shot Cup)
SP410
WAA410HS
Stretch-36
Stump-36
CB1034-28 (Replaces WAA28)
CB5034-28HS (Replaces WAA28-HS)
Pattern Control
28S1 (All Hulls)
PT28S
WAA28HS
SG28 II Super
Brush Wad
SG28
Magnum
Sporting Twenty Long
CSD 20
Trap Commander
Versalite
RXP20
Dispersor-X Spreader
Sporting Twenty Short
20S1 (All Hulls)
Brush Wad
WAA20
SP20S
Sporting Sixteen
Field Commander
SP16
Rex-24
Super Spark
CB0178-12 (Replaces WAA12L)
XXL-7/8 Remington, Winchester Hulls
WAA12L
Helix Cushion Driver-24
Dispersor-X Spreader
Piston Skeet
Short Shell
CSD 100
CB1100-12 (Replaces WAA12SL)
CB2100-12 (Replaces 12SO)
CB4100-12B Lightning
CB8100-12 (Replaces TGT12)
DRA (Replaces WAA12SL)
XL-1
Jammer XL-1
12S0 Gold Medal Hulls
R12L
TGT12S
Competition Special
Helix Cushion Driver-21
Z21 Trap Commander
WAA12SL
Light Brush
Competition Special Short
WAA12
WT12
Helix Cushion Driver
Original Brush
CSD 118
Multi-Metal 2-3/4” Hulls
CB0118-12 (Replaces WT12)
CB1114-12 (Replaces WAA12F114)
CB2118-12 (Replaces 12S3)
CB3118-12AR (Replaces 12C1)
CB4118-12B Windjammer (Replaces WTW12)
CB8118-12 (Replaces Fig 8)
A1-1/8 (Replaces WAA12)
XL-1-1/8
XXL-1-/8 Straight Wall Hulls
Pattern Control
Pattern Control Post
Spolar Gold
Versalite
Windjammer RPL
12S3 Gold Medal and Field Hulls
FIG8S
Color
Clear
Red
Orange
Clear
Clear
Red
Clear
Clear
Red
Red
Blue
Pink
Clear
Red
Green
Green
Green
Green
Clear
Clear
Clear
Clear
Yellow
Clear
Clear
Clear
Yellow
Clear
White
Clear
Clear
Clear
Blue
Clear
Clear
White
Pink
Gray
Clear
Clear
Clear
Clear
Clear
Red
Clear
Clear
Green
Pink
Green
Purple
Clear
Clear
Green
Clear
Clear
Clear
Pink
Green
Clear
White
Orange
Clear
Clear
Clear
Red
Orange
Clear
Clear
Pink
Red
Blue
Clear
White
Blue
Orange
Red
Blue
Gold
Red
Clear
Pink
Clear
1-800-243-3220
Qty
250
500
500
250
500
250
250
250
500
500
500
250
500
250
250
250
250
250
250
250
250
500
500
500
250
250
250
250
250
250
250
250
250
250
250
500
500
250
250
250
250
250
250
500
500
500
500
500
500
500
250
250
500
250
250
250
250
250
250
250
500
250
250
250
100
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
250
500
Prod #
160-156
743-487
247-261
785-653
838-068
619-764
784-893
485-903
328-263
190-152
122-836
777-064
925-652
293-905
167-996
732-761
183-117
742-803
149-025
392-884
855-804
916-902
246-178
827-409
584-654
710-610
765-542
724-960
870-029
118-436
831-915
192-874
824-686
949-901
820-711
447-719
964-269
862-762
120-802
236-879
953-147
111-843
197-475
790-235
144-064
413-431
132-422
715-502
445-928
753-739
733-985
815-350
816-960
667-819
589-429
610-907
862-303
713-054
148-829
845-988
846-657
874-725
383-374
565-360
102-036
414-321
310-261
212-736
731-173
361-847
362-077
148-781
260-384
186-743
448-295
288-229
256-605
871-884
895-256
997-158
758-353
810-558
Price
$8.99
$11.49
$11.99
$6.99
$16.49
$8.99
$8.99
$8.99
$10.49
$11.49
$11.79
$7.49
$16.49
$8.99
$8.49
$9.99
$8.49
$9.99
$8.29
$14.99
$10.49
$10.49
$10.99
$13.99
$11.99
$8.29
$7.59
$8.99
$6.99
$10.99
$8.49
$10.49
$10.99
$10.49
$9.99
$10.49
$12.79
$6.99
$10.49
$11.99
$10.49
$9.49
$14.99
$10.99
$11.29
$10.49
$11.49
$11.79
$11.79
$11.49
$5.99
$10.99
$13.99
$8.99
$10.49
$10.99
$6.99
$8.99
$8.99
$6.99
$11.49
$10.49
$11.49
$14.99
$13.49
$9.39
$10.49
$9.99
$11.29
$10.49
$9.39
$11.49
$11.79
$10.49
$12.79
$10.79
$11.99
$14.29
$12.29
$10.79
$5.99
$13.99
Qty
5000
5000
2500
5000
5000
5000
2500
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
Prod #
111-915
693-302
117-224
642-625
852-442
666-557
175-495
686-573
721-599
721-062
189-087
681-034
712-131
702-888
710-272
843-302
291-844
661-996
Price
$99.99
$159.99
$84.99
$94.99
$99.99
$159.99
$84.99
$139.99
$139.99
$139.99
$89.99
$134.99
$139.99
$139.99
$109.99
$89.99
$84.99
$134.99
Since 1977
SHOTSHELL RELOADING
Shotshell Wads
Gauge
12 Ga
10 Ga
Charge Weight
1-1/8 oz
1-1/8 oz
1-1/4 oz
1-1/4 oz
1-1/4 oz
1-1/4 oz
1-1/4 oz
1-1/2 oz
1-1/2 oz
1-1/2 oz
1-5/8 oz
1-7/8 oz
2 oz
2 oz
1-1/4 oz
1-1/2 oz
1-5/8 oz
2-1/2 oz
2-1/2 oz
2-1/2 oz
Brand
Remington
Remington
BPI
Downrange
Federal
Remington
Remington
BPI
BPI
Claybuster
BPI
BPI
BPI
BPI
BPI
BPI
BPI
Remington
BPI
BPI
Wad Type
R12H
RXP12
Multi-Metal 3” Hulls
A1-1/4 (Replaces WAA12F114)
12S4 Field Hulls
RP12
SP12
CSD 112
Multi-Metal 2-3/4” Hulls
CB1138-12 (Replaces WAA12R)
Tungsten Propulsion Systems 2-3/4” Hevi-Shot Hulls
Tungsten Propulsion Systems 3” Hevi-Shot Hulls
2-3/4”, 3” Turkey Ranger
Tungsten Propulsion Systems 3-1/2” Hevi-Shot Hulls
Deci-Max 3-1/2”
BPD-10 Tuff Steel 3-1/2”
Multi-Metal 3-1/2”
SP10 3-1/2”
Pattern Driver 3-1/2”
Tungsten Propulsion Systems 3-1/2” Hevi-shot
Cork Filler Wads
Cork wads are recommended for all magnum
loading applications to protect the base of the
shotcup. Wads can also be placed under the shot
bringing the load up to the proper crimping height.
If used in the shotcup, 12 gauge wads should be
used for 10 gauge shotcups and 20 gauge wads
should be used for 12 gauge shotcups.
20 Ga ............................................................ Qty...... Product # .....Price
1/8” Thick ........................................................................................250 ..............254-068 ..........$10.79
1/4” Thick ........................................................................................250 ..............243-082 ..........$10.49
1/8” Thick ........................................................................................250 ..............246-015 ..........$10.49
1/4” Thick ........................................................................................250 ..............233-824 ..........$10.99
Felt Cushion Wads
Unsurpassed energy absorption and cushioning make
felt an ideally suited material for cushion wads. If used
in the shotcup, 12 gauge wads should be used for 10
gauge shotcups and 20 gauge wads should be used for
12 gauge shotcups.
1/8” Thick ........................................................................................250 ..............718-049 ..........$10.99
1/4” Thick ........................................................................................250 ..............184-447 ..........$11.99
1/8” Thick ........................................................................................250 ..............657-772 ..........$10.99
1/4” Thick ........................................................................................250 ..............454-924 ..........$11.99
Shotshell Box
Shotshell box features a factory-style fit and is made from
durable, reusable, lightweight cardboard.
410 Bore .....Capacity ..... Qty ...... Product # ..... Price
2-1/2” ...........................25 ....................10 ................865-133 .............$6.19
2-1/2”, 3” ....................5 .....................10 ................910-316 .............$6.19
28 Ga ...........Capacity ..... Qty ...... Product # ..... Price
2-3/4” ...........................25 ....................10 ................520-749 .............$6.19
20 Ga ......................................Capacity ..... Qty ...... Product # ..... Price
2-3/4” .....................................................................25 ....................10 ................674-141 .............$6.19
3”...............................................................................25 ....................10 ................682-653 .............$6.19
2-3/4” .....................................................................25 ....................10 ................846-671 .............$6.19
2-3/4” ......................................................................5 .....................10 ................655-025 .............$6.19
2-3/4” .....................................................................25 ....................10 ................655-352 .............$5.49
2-3/4” .....................................................................25 ...................100 ...............844-199 ..........$25.99
3”................................................................................5 .....................10 ................649-564 .............$6.19
3”...............................................................................25 ....................10 ................657-289 .............$6.19
3-1/2” ......................................................................5 .....................10 ................643-371 .............$6.19
3-1/2” .....................................................................25 ....................10 ................624-123 .............$6.19
Since 1977
Color
Clear
Clear
Red
Yellow
Brown
Clear
Clear
Clear
Red
Red
Red
Red
Clear
Red
Clear
Clear
Clear
Clear
Clear
Clear
Qty
250
500
100
500
250
250
250
250
100
500
100
100
100
100
250
100
100
250
100
100
Prod #
811-421
814-564
111-335
496-622
759-753
806-838
804-364
492-274
111-699
646-729
121-457
127-477
421-606
131-657
469-330
938-375
119-424
795-775
799-060
140-705
Price
$10.99
$13.99
$12.99
$11.99
$5.99
$10.99
$10.99
$19.29
$14.99
$10.49
$13.99
$13.99
$16.99
$15.49
$13.99
$18.99
$14.99
$14.99
$18.99
$14.99
Qty
5000
5000
-
Prod #
670-912
161-168
-
Price
$139.99
$94.99
-
Clear Overshot Disks
These clear overshot disks are designed for roll crimps but
are suitable for any overshot card application. They allow
the user to see what is inside every load. 0.080” thick. 12
gauge. Package of 500.
# 182-998...........................................................................................................................................$12.99
Fiber Cushion Wads
These fiber filler wads are extremely light and flexible
and can be used as a cushion and filler as they compress
a bit during crimping and during firing. The overall
effect of the cushioning wad is to reduce felt recoil. Fiber wads can be split
for custom load adjustments.
410 Bore ....Qty ... Prod # ... Price
1/4” Thick ......... 200 .....935-847 .......$9.99
3/8” Thick ......... 200 .....973-389 ....$10.29
1/2” Thick ......... 500 .....229-163 ....$12.79
32 Ga .........Qty ... Prod # ... Price
1/4” Thick ......... 200 .....432-817 .......$9.99
28 Ga .........Qty ... Prod # ... Price
1/4” Thick ......... 200 .....114-371 .......$9.99
1/2” Thick ......... 500 .....222-511 ....$12.99
20 Ga .........Qty ... Prod # ... Price
1/4” Thick ......... 200 .....519-399 .......$9.99
3/8” Thick ......... 200 .....260-244 .......$9.99
1/2” Thick ......... 500 .....211-317 ....$12.49
16 Ga .........Qty ... Prod # ... Price
1/4” Thick ......... 200 .....197-393 .......$9.99
3/8” Thick ......... 200 .....836-695 .......$9.99
1/2” Thick ......... 500 .....204-586 ....$12.79
12 Ga .........Qty ... Prod # ... Price
1/4” Thick ......... 200 .....784-727 .......$9.99
3/8” Thick ......... 200 .....486-601 ....$10.49
1/2” Thick ......... 500 .....198-066 ....$12.49
10 Ga .........Qty ... Prod # ... Price
1/4” Thick ......... 200 .....726-713 .......$9.99
1/2” Thick ......... 500 .....196-534 ....$11.99
HITS Component Package
These individual packages were created to cater
to customers that wanted to make top quality
shotgun ammunition without spending a lot
of money on individual components. Each
package includes the basic components of a
loaded shotshell. The rest can be purchased
at the customers discretion, either online at midwayusa.com or in the
surrounding pages.
20 Ga 3” .................................................................... Product # .....Price
Little Giant ............................................................................................................642-413 ..........$37.49
Includes 200 Fiocchi hulls, 200 BPI Sporting Long wads, 1 package of overshot cards and 1
package of 25-round cardboard shotshell boxes.
12 Ga 3” .................................................................... Product # .....Price
Steel Duck and Goose ..................................................................................119-433 ..........$37.99
Includes 100 Fiocchi hulls, 100 Ranger Plus wads, 1 package of Tyvek overshot cards and 1
package of 25-round cardboard shotshell boxes.
Sporting Clays Express ..................................................................................352-145 ..........$34.99
Includes 200 Fiocchi hulls, 200 Pistok Skeet Wads and 1 package of 25-round cardboard
shotshell boxes.
1-800-243-3220
midwayusa.com
455
SHOTSHELL RELOADING
Gualandi
Nitro Cards
Shot
Nitro Cards are used by shotgunners between the powder
and the shot or as fine-tuning spacers inside the shotcup.
Shot pricing is subject to change due to market fluctuations.
Description ........................ Thickness ....... Qty ...... Product # ..... Price
410 Bore......................................................0.125” ...................500 ...............171-093 .............$9.99
28 Ga.............................................................0.125” ...................500 ...............170-807 ..........$10.29
20 Ga.............................................................0.125” ...................500 ...............167-700 .............$9.99
16 Ga.............................................................0.125” ...................500 ...............162-503 .............$9.99
12 Ga.............................................................0.070” ...................500 ...............119-231 .............$9.99
12 Ga.............................................................0.125” ...................500 ...............161-681 .............$9.99
10 Ga.............................................................0.125” ...................500 ...............161-507 .............$9.99
Overshot Cards
Placing an Overshot Card on top of the shotcup just before
crimping will ensure a flatter and tighter crimp for more
consistent load combustion. Cards are made of 0.030” thick cardboard and
are recommended for all high performance loads.
410 Bore .........................................................................................500 ..............195-538 ............ $8.99
28 Ga ................................................................................................500 ..............194-311 ............ $8.99
20 Ga ................................................................................................500 ..............193-601 ............ $8.99
16 Ga ................................................................................................500 ..............191-914 ............ $8.99
12 Ga ................................................................................................500 ..............188-808 ............ $8.99
10 Ga ................................................................................................500 ..............185-395 ............ $8.99
Waxed Hard Cards
• For all card wad and filler applications
• Wax treatment creates a tighter seal for higher velocities and
acts as a moisture barrier
• May be used for traditional upland loads, slugs or anything requiring a
firm basewad and tight seal
1/2” Thick ..................................................... Qty...... Product # .....Price
20 Ga ................................................................................................200 ..............588-904 ............ $9.99
12 Ga ................................................................................................200 ..............810-894 ............ $9.99
Gas Seals
Countless high performance loads and specialty ammunition
manufacturers depend on these plastic gas seals. The shape assists the
powder to achieve a complete burn with the net result being higher
velocities. Wads work with 12 Gauge of all lengths. Package of 250.
Flex-Seal ..........................................................................................250 ..............534-210 ..........$10.99
GS2 (Pictured) ............................................................................250 ..............827-039 ..........$12.99
BPGS Gas Seals
Gas seals ensure that all powder is completely burned
for maximum velocity. Package of 250.
# 144-329...........................................................................................................................................$15.49
$15.49
Rigid Structure Sabot
Designed for use with 12 Ga shotguns and 50 caliber pistol bullets.
Sabot is 0.712” in diameter, 1.195” long, and 0.140” in thickness.
Package of 50.
# 278-083...........................................................................................................................................$16.99
$16.99
Shot Size
#1
#4
#4
00
00
000
Brand
BPI
BPI
Hornady
BPI
Hornady
Hornady
Shot Size
#12
#11
#10
#9
#9
#9
#8-1/2
#8-1/2
#8
#8
#8
#7-1/2
#7-1/2
#7-1/2
#7-1/2
#7
#7
#7
#6
#6
#6
#6
#5
#5
#5
#4
#4
#2
F
Brand
BPI
BPI
BPI
BPI
Lawrence
Lawrence
Lawrence
Lawrence
BPI
Lawrence
Lawrence
BPI
Lawrence
Lawrence
Lawrence
BPI
Lawrence
Lawrence
BPI
Lawrence
Lawrence
Lawrence
BPI
BPI
Lawrence
BPI
Lawrence
BPI
BPI
Shot Size
#7
#6
#4
#3
#2
#1
BB
BBB
#F
#T
* Free Freight
Brand
BPI
BPI
BPI
BPI
BPI
BPI
BPI
BPI
BPI
BPI
Prod #
398-285
436-866
122-187
531-428
613-779
748-071
Price
$42.99
$42.99
$25.99
$42.99
$25.99
$25.99
Qty
10 lbs
10 lbs
10 lbs
11 lbs
25 lbs
50 lbs*
25 lbs
50 lbs*
11 lbs
25 lbs
50 lbs*
11 lbs
10 lbs
25 lbs
50 lbs*
11 lbs
25 lbs
50 lbs*
11 lbs
10 lbs
25 lbs
50 lbs*
11 lbs
10 lb
10 lbs
11 lbs
10 lbs
11 lbs
8 lbs
Prod #
814-885
966-591
399-467
969-945
192-129
513-414
742-455
593-495
147-144
134-688
413-479
538-751
781-696
184-787
418-616
513-520
719-551
147-010
496-131
769-494
712-457
965-886
494-404
657-166
195-963
486-678
314-771
955-556
584-423
Price
$43.99
$43.99
$43.99
$54.99
$46.49
$106.99
$46.49
$106.99
$54.99
$46.49
$106.99
$54.99
$31.99
$46.49
$106.99
$54.99
$46.49
$106.99
$54.99
$31.99
$46.49
$106.99
$54.99
$21.99
$31.99
$54.99
$31.99
$58.99
$39.99
Qty
10 lbs
10 lbs
10 lbs
10 lbs
10 lbs
10 lbs
10 lbs
10 lbs
10 lbs
10 lbs
Prod #
459-705
445-459
440-666
435-874
406-636
402-707
363-348
358-687
340-840
352-362
Price
$22.49
$22.49
$19.79
$19.79
$19.79
$19.79
$19.79
$19.79
$19.79
$19.79
Disks can be placed at the base of the shotcup and
can perform as an overcushion wad. They are thin
but minimize the chance of pellets harming the wad
to give better patterns and improved pellet counts.
Ideal for steel shot loads. 0.080” thick.
12 Ga ................................................................................................500 ..............279-509 ..........$12.49
10 Ga ................................................................................................500 ..............274-179 ..........$11.99
Shot Buffers
Wraps are placed inside the shotcup to protect the barrel
from contact with steel pellets. Designed for use with
steel sized #2 shot and up. Package of 100.
Buffer ............................................................ Qty...... Product # .....Price
Bismuth ......................................................................................... 1/2 lb ...........701-441 ............ $9.99
Specially formulated energy-absorbing and lubricating materials for use with Bismuth shot
Mylar ................ Qty .................. Dimensions ........... Product # .....Price
20, 16 Ga ................... 100 .................. 0.003” x 1-7/8” x 1-3/8”..........722-657 ............ $7.49
12, 10 Ga ................... 100 ..................0.003” x 2-1/8” x 15/16” .........488-020 ............ $7.49
12, 10 Ga ................... 100 .................0.003” x 2-5/16” x 1-5/8” ........265-590 ............ $6.29
12, 10 Ga .....................50 .................... 0.010” x 2-1/4” x 1-3/8”..........714-319 ............ $5.29
Teflon ............... Qty .................................................. Product # .....Price
12 Ga .............................50 ....................................................................................548-314 ..........$14.49
10 Ga .............................50 ....................................................................................741-964 ..........$14.29
midwayusa.com
Qty
8 lb
8 lb
5 lbs
8 lb
5 lbs
5 lbs
Tyvek Overshot and
Overcushion Disks
Shot Wraps
456
BUCKSHOT
Shot Type
Nickel Plated Lead Shot
Lead Buckshot
Lead Buckshot
Lead Buckshot
LEAD
Shot Type
Lead Shot
Lead Shot
Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Copper Plated Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Magnum Lead Shot
Steel
Super Buck Lead Shot
STEEL
Shot Type
Steel Shot
Steel Shot
Steel Shot
Steel Shot
Steel Shot
Steel Shot
Steel Shot
Steel Shot
Steel Shot
Steel Shot
Mix #47 ....................................................................................... 1/2 lb ...........688-059 ............ $9.99
This special combination is designed for use with steel shot and very large pellets
Original ......................................................................................... 1/2 lb ...........695-248 ............ $8.99
Formulated for improved magnum load pattern density with a minimum effect on chamber
pressures
Buffer Dipper ......................................................................................................703-301 ............ $2.49
Dipper holds approximately 20cc of buffer compound
1-800-243-3220
Since 1977
SHOTSHELL RELOADING
HITS LBC BluForce Sabot
Component Package
The BluForce Sabot features a 1 oz Dangerous
Game Slug that measures 0.650” in diameter.
A superb long range load, BluForce sabots
offers incomparable penetration as well as
awesome long range accuracy.
# 382-704 ......................................................................$25.99
AQ Slug
Nylon fins attached to the round ball provide rotation for longrange accuracy and knock down power. 12 gauge. 1 oz slug.
Package of 25. This is not loaded ammunition.
# 557-135............................................................................................................$19.49
Gualandi
Handloading
Hevi-Shot:
3rd Edition
• By Ballistic
Products, Inc
• Pub. in 2002
• 44 pp. Softcover
High
Performance
Loads For Clays:
7th Edition
• By Ballistic
Products, Inc
• Pub. in 2006
• 35 pp. - Softcover
# 788-214 .............................................$12.99
# 332-089 .............................................$12.99
Status of Steel:
Handloading
Steel Shotshells
11th Edition
The Mighty 10
Gauge Shotshell
Reloading Book:
6th Edition
• By Ballistic
Products, Inc.
• Pub. in 2006
• By Ballistic
Products, Inc
• Pub. 2007
# 799-199 .............................................$12.95
# 674-172 .............................................$12.95
Reloading for
Shotgunners:
5th Edition
Buckshot Loading
3 Shotshell
Reloading Book
• By Rick Sapp
• Pub. in 2005
• By Ballistic
Products, Inc
• Pub. in 2004
# 864-494 .............................................$19.99
# 212-783 .............................................$11.99
Shotshell
Reloading
Handbook:
5th Edition
RCBS Handbook
of Shotshell
Reloading
• By Lyman
• Pub. in 2007
• Published by
RCBS
• Pub. in 2005
# 887-011 .............................................$17.99
# 890-340 .............................................$24.99
Shotshell Slug
The Hunting slug is designed to give a
tight fitting gas seal for the best possible
performance and features a rotational vane
A
B
C
designed to stabilize the slug in flight to
improve accuracy. Works for both rifled and smooth bore barrels. The Light
Game slug was designed for hunting small game with the light, nimble 410
bore shotgun. Each slug features a plastic, gas sealing carrier for consistency
and pushes a soft, round lead ball to high velocity. The Target Shotshell
slug features an uncompressed outside diameter of the sabot specifically for
modern rifled barrels at a land following 0.739”. Slug is 0.650” in diameter.
This is not loaded ammunition.
Hunting............................... Bullet Wt....... Qty ...... Product # ..... Price
20 Ga (A) ....................................................7/8 oz ...................25 ................897-440 ..........$20.99
16 Ga................................................................1 oz .....................25 ................153-309 ..........$20.99
12 Ga........................................................... 1-1/8 oz .................25 ................553-339 ..........$20.99
Light Game ........................ Bullet Wt....... Qty ...... Product # ..... Price
410 Bore (B) ............................................ 7/32 oz..................25 ................177-832 .............$6.99
Target Shotshell ................ Bullet Wt....... Qty ...... Product # ..... Price
12 Ga (C) ......................................................1 oz .....................25 ................779-775 ..........$21.99
Commander IDS Slug
Soft lead slug attached to an aerodynamically shaped impact
discarding sabot (IDS). The IDS provides stability during flight
to the target and effectively controls the slug’s expansion rate for deeper
penetration on big game. 12 gauge 1-1/16 oz. Package of 10. This is not
loaded ammunition.
# 158-096............................................................................................................................................. $6.49
Pellet Statistics and Ballistics:
2nd Edition
• By Ballistic Products, Inc.
• Pub. in 2008
# 146-162 .............................................$12.99
Scheming Sporting Clays
• By Ballistic Products, Inc
• Softcover
The Small Bore
Manual:
4th Edition
Coyote Loads:
1st Edition
• By Ballistic
Products, Inc
• Softcover
• By Ballistic
Products, Inc
• Pub. In 2010
# 183-595 ................................................$6.59
# 290-552 ................................................$9.99
Handloading
Bismuth Shot:
5th Edition
Prairie Pheasant
Manual:
1st Edition
• By Ballistic
Products, Inc
• Pub. in 2001
• By Ballistic
Products, Inc
• Pub. 2008
# 796-398 .............................................$11.99
# 257-580 .............................................$12.99
The Sixteen
Gauge Manual:
6th Edition
• By Ballistic
Products, Inc
• 56 pp. -Softcover
# 649-144 .............................................$12.95
# 912-449 .............................................$10.79
Since 1977
1-800-243-3220
midwayusa.com
457

446-457 Shotshell Reloading

Transcription

Similar documents

kenwood audio adju