Part I - Auto Krafters

Transcription

ORDERING INFORMATION
Order by Phone
It’s fast and convenient! For best service have all catalog and
credit card information ready, then call:
TOLL-FREE ORDER LINE 1-800-228-7346
FAX NUMBER 1-540-740-8011
LOCAL NUMBER 1-540-740-8000
a $20 minimum is required for orders placed over the
phone. Mastercard, VISA, Discover and American Express are wel-
come. C.O.D. shipments are not available for any items.
Mail Orders
Fill out the order blank in the back of this catalog. For fastest delivery, send a money order or cashiers check. Personal
checks are accepted but will delay the order 7 days while
the check clears the bank. Mastercard, VISA, Discover and
American Express are welcome. a $20 minimum is required
for orders placed through the mail. Be sure to include
card number, expiration date, billing address, and signature of
cardholder.
Fax Orders
Accepted 24 hours daily. Mastercard, VISA, Discover and American Express. a $20.00 minimum is required for orders
placed over the fax.
Fax number is 540-740-8011.
Warranty / Exchanges
All parts are guaranteed. Please inspect the shipment as soon
as you receive it. If you have a problem with any purchase, please
call one of our associates at 800-228-7346. Many times, application
problems can be quickly handled by phone, saving needless shipping expense. Should you find it necessary to return anything, a copy
of our return procedures is packed with your invoice. All claims for
shortages must be made within 48 hours. No shortage claims
will be accepted after 48 hours. To better facilitate our handling
of returned items, please call and obtain a return authorization
number. All returns must be sent prepaid. C.O.D. returns will
be refused. Returns older than 30 days are subject to a restock
fee. Absolutely no returns after 120 days from date of purchase
regardless of reason unless covered by an extended warranty.
We reserve the right to charge a restocking fee on certain items. Special orders are also subject to a restock fee. Auto Krafters, Inc.’s liability
is limited to the replacement of the product or refund of the purchase
price. Installation labor costs or shipping charges are not refunded.
Electrical parts are non-returnable once installed. We will replace
defective units only. Our associates are available from 8:30–6:00
Monday–Friday ET.
Warehouse Location
Auto Krafters, Inc.’s office and warehouse are located in New Market,
Va., off Interstate 81 exit 264. Go east 1⁄2 mile. PO Box 1100 • 214
East Old Cross Road • New Market, VA 22844. Our local phone
number is 540-740-8000. Sorry no personal checks accepted for
showroom purchases without prior authorization.
Store Hours (Eastern time zone)
MONDAY - FRIDAY....................................... 8:30 AM – 6:00 PM
SATURDAY......................................................9:00 AM – NOON
SUNDAY........................................................................CLOSED
Phone Hours (Eastern time zone)
MONDAY - FRIDAY....................................... 8:30 AM – 6:00 PM
SATURDAY......................................................9:00 AM – NOON
SUNDAY........................................................................CLOSED
Shipping Charges
In the continental United States, there is a minimum shipping
charge of $9.95. Most orders are shipped via UPS or FedEx.
Please furnish a complete street address as UPS cannot deliver
to a post office box number. We reserve the right to ship extra
heavy or oversize shipments freight collect. Hoods, fenders
and quarter panels fall in this category. If you have prepaid the
shipping and the order has to be shipped freight collect, we will
refund your prepaid shipping. If you have any question, please
call us at 800-228-7346 for assistance. Please check all truck
shipments for damage before signing the bill of lading. Once
truck shipments are signed for, no claims can be made for
damage. Some parts require additional handling charges. Fragile
items, such as mouldings, will be shipped in PVC tubes and will
incur a $15 handling fee. All oversized items will incur a $10 boxing
fee and / or crate charges where applicable. Please inquire about
additional handling charges when ordering.
Alaska, Hawaii, Puerto Rico and Canadian orders should add
20% estimated shipping and handling with a minimum of $20.00.
Other foreign countries should add 35% with a minimum of
$20.00. Any excess will be refunded. Canadian customers are
responsible for all customs brokerage fees and duties.
Customer Satisfaction
Our goal is customer satisfaction and we strive to sell the highest
quality parts at competitive prices. If you encounter a problem
with your order, contact us immediately so that we may resolve
the problem. We want your repeat business and the business
of your friends and neighbors. Most orders are processed and
shipped within 24 hours of receipt. If we should need to back
order any items, they will be shipped as soon as possible unless
you notify us otherwise. If you require your parts delivered by a
specific date, please advise us when placing your order and we
will do our best to accommodate your needs.
Back Ordered Items
Due to the difficulty of keeping some items in stock, an item you
order may be put on back order for later delivery. Most back
ordered items can be shipped in 21 days. If you do not receive your
back ordered items within the time stated on your notification letter,
please call us at 1-800-228-7346 for a revised delivery date.
Origin of Parts
We sell both Genuine Ford and quality reproduction parts acquired
from many sources, both domestic and foreign. We will be happy
to give you the country of origin of all our parts, if known. All Ford
Trademark parts sold (such as emblems, etc.) are licensed by
Ford Motor Company®. The majority of the parts in this catalog
are made in the USA, are reproductions of originals and are
NOT Genuine Ford. Auto Krafters is proud to offer reproduction
parts and accessories from such manufacturers as Dennis Carpenter®, Auto Custom Carpet®, Jim Osborn Reproductions®, Scott
Drake Mustang Parts® and many others.
NOTE: We are not responsible for typographical errors.
Prices are subject to change without notification.
NOTE: Illustrations are typical and may not be representative of the part you are ordering.
Secure online ordering @ our web site http://www.autokrafters.com
Auto Krafters, Inc.
PO Box 1100 • 214 East Old Cross Road
New Market, VA 22844
Copyright © 2011 Auto Krafters, Inc. All rights reserved. Printed in the United States of America. No part of this publication may
be reproduced including drawings, photographs or text without the prior written permission of Auto Krafters, Inc. All statements and
recommendations contained herein are based on information we believe to be reliable, but the accuracy thereof is not guaranteed.
Door........... Lock Knobs.....................23
.................. Lock Set....................24, 28
.................. Moulding.........................31
.................. Panel Related.......9, 75, 76
.................. Skin.................................34
.................. Step Plates......................10
.................. Striker Plate Related..23, 76
.................. Weatherstrip......................2
.................. Win. Glass Bumpers...5, 22
Drag Link...........................................67
Drive Shaft Yokes..............................63
Electro-luminescent Gauge Set.........13
Electronic Module..............................57
Emblems...........................................32
Engine....... Electrical / Wiring......55–58
.................. Gasket Sets; Mount........53
.................. Hardware............53, 80–82
.................. Lamp Kit..........................58
.................. Replacement...................59
.................. Section......................39–59
Exhaust..... Gaskets.....................54–55
.................. Hardware........................80
.................. Headers; System; Tip......54
.................. Manifold Related..54–55, 80
Exterior...... Decals.......................33, 83
.................. Gasket & Pad Kit.........4, 30
.................. Hardware............37, 77–79
.................. Section......................26–38
Fan, Blade & Shroud.........................40
Fender....... Emblems.........................32
.................. Flares..............................37
.................. Moulding.........................31
.................. Sheet Metal.....................33
Firewall...... Air Duct Vent Drain Tube12
.................. Insulation.........................12
.................. Insulation Retainers..12, 75
.................. Pad..................................12
Flasher...... Switch Knob & Bezel.......15
Flexplate......................................62, 63
.................. Bolts & Washers........63, 82
Floor.......... Covering.......................... 11
.................. Mats.......................... 11, 88
.................. Pans & Reinforcement....35
Flywheel Parts.............................62, 82
Fuel / Gas.. Caps................................50
.................. Filters & Related.............48
.................. Lines & Hoses.................49
.................. Pump.........................48–49
.................. Sender Related...49–50, 81
.................. Tank Related.............50, 81
Glossary............................................98
Glove Box Parts............................5, 15
Grille..................................................26
.................. Emblem...........................32
.................. Moulding.........................30
Hardware Section........................75–82
Harmonic Balancer Related..............47
Headers & Related......................54, 80
Headlamp.. Related Parts......26–27, 78
.................. Splash Shields............2, 27
................... Switch Knob, Bezel & Rel14
.................. Switches..........................25
.................. Switch Hardware.......25, 75
Headliners........................................ 11
Heater........ Blower Motor & Related..12
.................. Blower Switch & Cable....25
.................. Cable-Firewall Seal.........13
.................. Core; Seal Kit..................12
.................. Ctrl. Bezels & Cables......13
.................. Hose Related......13, 41, 80
.................. Knobs & Related.............14
.................. Switch Related................75
.................. Temp. Control Valve........41
Heat Shield........................................10
Hood..................................................33
.................. Auxiliary Catch Hook.......26
.................. Bumpers......................5, 26
.................. -Cowl Seal.........................2
.................. Hardware........................26
.................. Hinges.............................26
.................. Pin & Spring Assembly....26
.................. Pin Kit & Prop Rod..........26
Horn........... & Relay...........................58
.................. Buttons & Pads...............17
.................. Ring Parts.................17, 75
Hub Caps & Related..........................38
Hubs..................................................70
HumpHuggers...................................24
Ignition....... Coils................................56
.................. Lock Sets..................24, 28
.................. Wires...............................56
.................. System (Electronic)...55–56
.................. Switches & Bezel............25
Instr. Clust.Light Bulb Socket............13
.................. Voltage Regulator...........25
Intake Manifolds & Rel................47–48
Interior....... Hardware..................75–78
.................. Section........................7–25
.................. Wiring / Electrical......24–25
J-clip............................................37, 78
Jack Straps........................................79
Key Blanks........................................23
Leaf Springs Related...................69–70
Lic. Plate.... Lamp Lens......................30
.................. Mounting Bracket............30
Liftgate....... Bumpers......................6, 36
.................. Handle Related...........5, 36
.................. Hardware..................36, 77
.................. Retainer....................36, 79
.................. Weatherstrip......................3
Marker Lamps Related......................29
Master Cylinder Related........71, 72, 82
Mirror......... Parts (Ext.)21, 27–28, 76, 78
.................. Parts (Int.).....20–21, 76–77
Models...............................................86
Motor Mount......................................53
Moulding......................................30–31
.................. Clips..............31–32, 78–79
.................. Sets (Side)......................31
Oil.............. Cooler.............................41
.................. Dipsticks & Tubes.....45–46
.................. Filler Cap Related.....46–47
.................. Filter Related...................46
.................. Filter Relocation Kit.........46
.................. Gauge.............................13
.................. Pan Drain Plugs..............45
.................. Pan Gasket Sets.............46
.................. Pressure Switch........46, 58
Parking Brake Related................19, 74
Parking Lamp Related...............4–5, 29
PCV Related..................................6, 53
Performance Meter............................58
Points Eliminator Kit..........................57
Power Steering Parts........................68
Qtr. Panel.. Moulding (Upper)............31
.................. Skins...............................34
Qtr. Pillar Latch Posts........................34
Qtr. Trim..... Panel Mt. Brackets....10, 76
.................. Panels.............................10
Radiator.............................................40
.................. Bypass Hoses.................41
.................. Caps................................39
.................. Drain Cock......................39
.................. Hoses & Related.......40, 80
.................. Mt. Brackets & Insul........39
.................. Overflow Supply Tank.....39
Radio......... & Speakers.....................20
.................. Antenna & Relat....5, 19, 27
.................. Knob & Knob Bezels.......15
Radius Arm Bushings & Insulator.......66
Reflectors....................................28–29
Rocker Panels...................................34
Roof Rail Weatherstrip........................2
Seat........... Back Trim Panel; Foam.....7
.................. Belts & Related.............8–9
.................. Corbeau & Related.......7–8
.................. Handle Related.................9
.................. Hardware........................75
.................. Hinge Covers....................8
.................. Stop Bumper Kit............5, 9
Sheet Metal.................................33–35
Shift........... Collars.............................17
.................. Diaphragm; Improver Kit...60
Shifter........ Parts (Col.)....17–18, 75–76
.................. Parts (Floor)....................21
Shocks...............................................67
Sound Deadener...............................10
Spare Tire Mt. Hardware.......37–38, 79
Spark Plug Related.........56–57, 81–82
Speedometer Related...........15–16, 61
Spindle Nut Kit...................................70
Spring Bushings (Rear).....................70
Starters & Related.............................45
Starter Solenoid...........................42–43
Starter Sol.Mounting Screws......43, 81
Steering..... Gear Box Related...........68
.................. Shaft................................69
.................. Stabilizer Related............67
Steer. Col... Bearing Related (Lower)..69
.................. Bearing Related (Upper)..18
.................. Covers.............................18
.................. -Floor Seal............5, 19, 69
.................. Parts (Upper)..................18
.................. Parts (Lower)......69, 75–76
Steering Wheel & Related...........16–17
Step Plates.......................................10
Striker Plates & Related..............23, 76
Sunvisors & Related.................... 11–12
Supertop............................................38
SuspensionBushing Sets (Front).......66
.................. Parts (Front)..............66–67
.................. Parts (Rear)..............69–70
Sway Bars........................................66
Tachometer Related..............13–14, 24
Tailgate..............................................35
.................. Bumpers......................6, 35
.................. Hardware Kits...........36, 77
.................. Hinge...............................35
.................. Latch Parts................36, 79
.................. Moulding (Upper)............31
.................. Posts; Support................35
.................. Weatherstrip......................3
Taillight...... Lamp Related............29–30
.................. Lens-Housing Gaskets......5
.................. Panels.............................35
.................. Wiring Grommet..........6, 30
Thermostat Related.....................40–41
Throttle Related...........................48, 81
Tie Rod End Related.........................67
Timing Chain Related........................42
Tow Hooks & Straps....................38, 90
Track Bar Bushings...........................66
Transmiss.. Cooler; Lines...................60
.................. Dipstick.....................60, 62
.................. Filter / Gasket Kits...........60
.................. Kick-down Cable.............60
.................. Oil Pan......................60, 62
.................. Oil Pan Filter...................60
.................. Performance Auto.....61–62
.................. Section......................60–63
.................. Vacuum Modulators........60
Tube Nuts....................................32, 78
Turn Sig..... Cam Repair Kit................25
.................. Lever & Knob..................19
.................. Switches..........................25
U-bolts.........................................70, 82
U-nuts..........................................37, 78
Under-dash Courtesy Lamp Bracket15
Upholstery & Installation Supplies.......7
Valve Cover Related..........................52
Vehicle Covers..................................87
Vent Win.... Handles & Related....22, 76
.................. Weatherstrip......................2
Volt. Reg.... Engine & Related............44
.................. Instrument Cluster...........25
W/shield..... Fold-down Latch Kit........27
.................. Frame Seals......................2
.................. Latch Knobs....................12
.................. Washer Related..27, 42, 81
.................. Weatherstrip......................2
.................. Wiper Related.. 4, 12, 27, 76
.................. Wiper Switch Knob Rel...15
.................. Wiper Switch Relat....25, 75
Water......... Gauge.............................13
.................. Temp. Sending Units.......58
.................. Pump Related.................41
W/strip....... Kits................................3–4
.................. Section..........................2–6
Wheel........ Cylinders...................72–73
.................. Studs.........................38, 78
.................. Bearing Related..............74
Wheelhouses.....................................34
Window...... Channel Kit.......................2
.................. Handle Related.........21, 76
.................. Lift Channel.....................22
.................. Regulators.......................21
Wire Loom Strap...................25, 58, 82
Wiring........ Harness.....................24, 57
.................. Harness Wrap.................58
.................. Straps........................58, 82
.................. Terminal Kit.........25, 58, 82
Note: We use Ford-type part numbers in our catalogs for reference only. Most parts listed are quality reproductions of the originals, NOT Genuine Ford.
CONTENTS
A/C............ Blower Motor...................12
.................. Systems..........................45
AcceleratorPed. Rod-Firewall Seal.....5
.................. Pedal Pad & Trim............19
Accessories.................................86–90
Air Bypass Valve................................50
Air Cleaner Related.....................51, 81
Air Duct Vent Drain Tube...................12
Air Vent Inlet Duct Seal Kit..................2
Alternator Related...........44–45, 57, 81
Antenna Related......................5, 19, 27
Arm Rest.... Mt. Clip & Screws......10, 76
.................. Pads................................10
Axle........... Bumper (Front)............6, 66
.................. Bumper (Rear)............6, 70
.................. Housing Gasket (Rear)...70
.................. Shaft (Rear)....................70
Back-Up Lamp Switch.......................25
Back Glass Weatherstrip.....................3
Ball Joints..........................................66
Barrel Clips..................................32, 78
Battery Related......................43, 81, 90
Bellhousing........................................62
Beltline Weatherstrip...........................2
Bikini Top...........................................38
Body.......... Bolts & Related...37, 77–78
.................. Side Panel Weatherstrip...3
Books / Videos.............................84–85
Brake......... Booster Related..........6, 71
.................. Calipers; Pads; Rotor......73
.................. Combination Valve..........71
.................. Conversion Kits...............74
.................. Drums & Shoes...............73
.................. Fluid................................71
.................. Hardware Kits...........73, 82
.................. Hoses........................71–72
.................. Lamp Switches................25
.................. Lines...............................72
.................. Master Cyl. Rel...71, 72, 82
.................. Pedal Related.....19, 74, 82
.................. Proport. Valve Related....71
.................. Section......................71–74
.................. Speed Bleeders..............73
.................. Warning Bezel & Lens.....15
Brass Freeze Plug Kit........................39
Bumper & Related.......................33, 78
Bumpers, Plugs & Grommets..........5–6
Bypass Hoses...................................41
C-bushings.......................................66
Carburetor........................................47
.................. Choke Bezel & Cable......14
.................. Return Spg. Bracket.. 47, 81
Cargo Area Floor...............................35
CD Changer......................................20
Center Link.......................................67
Chemicals....................................90–97
Choke........ Knob................................14
.................. Bezel & Cable.................14
Cigarette Lighter Related..................15
Clothing.............................................86
Clutch........ Disc; Press. Plate; Kits....65
.................. Equalizer Parts................64
.................. Pedal Rel..5, 19, 63–64, 82
.................. Pilot Bearing, Bushing.....65
.................. Pressure Plate Bolts..65, 82
.................. Release Lever Parts.......64
.................. Section......................63–65
.................. Throwout Bearing............65
Coat Hook Related......................24, 77
Coil Spring Related...........................66
Cowl Side Panels..............................34
Crankcase Ventilation Breather.........46
Dash Cover & Pad.............................14
Decals...............................................83
Defroster.... Ctrl. Cable Assembly.......13
.................. Hose................................12
Dimmer Switch..................................25
Distributor Related......................55, 57,
Door........... Check Straps............10, 28
.................. Glass Run Parts................2
.................. Handle Rel. (Ext.)........5, 28
.................. Handle Rel. (Int.)22–23, 76
.................. Handle Finger Cups..........9
.................. Hinge & Related........10, 28
.................. Hinge Posts.....................34
.................. Latch Related......23, 75, 76
.................. Lock Kit (Power)..............24
WEATHERSTRIP
We sell the highest quality weatherstrip available at competitive prices
from such leading manufacturers as Scott Drake® and Dennis Carpenter®. All weatherstripping carries a 1-year warranty. You must retain
your invoice to file a warranty claim. No invoice – no claim.
(D)
Note: Some small seals are foreign made. If you have any questions about the country of origin, please call.
(F)
(L)
(G)
(I)
Headlamp Splash Shields
’66 - ’77
(E)
(H)
................................ C6TZ-13B159..............pr.............. 4.95
(K)
(L)
C6TZ-9601988
Roof Rail Weatherstrip (D)
C6TZ-9601934
Seals top of door front, top and back to body.
’66 - ’77
Air Vent Inlet Duct Seal Kit
Does both doors.
................................ C6TZ-9601934.............kit............ 19.95
Air Vent Inlet Seals
’66 - ’77
................................ BR108..........................kit............ 54.95
Door Weatherstrip (F)
Exterior seals only.
’66 - ’77
................................ C9TZ-9751222.............pr............ 44.95
Beltline Weatherstrip Kit (E)
Includes 8 seals, 4 per side.
’66 - ’77
(J)
’66 - ’77
LH and RH.............. C6TZ-9601988.............pr............ 19.95
Vent Window Weatherstrip
’66 - ’77
’66 - ’77
C6TZ-16740
To serial #O60,001.. C6TZ-9720708.............pr............ 79.95
Vent windows.
Includes back edge of vent window seals. 4 piece kit.
(G) and (H).............. C6TZ-9721448.............kit............ 59.95
Back edge of vent window seals.
(H)........................... C6TZ-9721450.............pr............ 14.95
Door Glass Run Weatherstrip (I)
NOTE: This item is included in Window Channel Kit #C6TZ-9721460S. If
you are ordering that kit, you do not need to order this weatherstrip.
’66 - ’77
................................ BR110..........................pr............ 64.95
Hood-to-Cowl Seal
Mounts with the middle ridge up and fastener side toward the windshield.
56" long. Includes fasteners.
’66 - ’77
................................ C6TZ-16740.................ea........... 11.95
(C)
C6TZ97223A55A
C6TZ97223A54A
(A)
C6TZ9721509B
(B)
C6TZ9721508B
Lower Door Glass Run Channel
Metal. Includes brackets. Does not include weatherstrip.
NOTE: These items are included in Window Channel Kit #C6TZ9721460S. If you are ordering that kit, you do not need to order these
parts as well.
Windshield Frame Seals
Windshield weatherstrip sold separately.
’66 - ’77
’66 - ’77
Top seal. Located above windshield weatherstrip.
(A)........................... C6TZ-9703114A..........ea........... 29.95
Lower seal. Located below windshield weatherstrip.
(B)........................... C6TZ-9603828A..........ea............. 7.95
Windshield Weatherstrip (C)
’66 - ’77
’67 - ’77
For use without moulding.
................................ C6TZ-9603110B..........ea........... 49.95
For use with moulding.
................................ C7TZ-9603110A..........ea........... 52.95
’66 - ’77
’66 - ’77
Hinge side. (J)
LH............................ C6TZ-97223A55A........ea........... 29.95
RH........................... C6TZ-97223A54A........ea........... 29.95
Latch side. (K)
LH............................ C6TZ-9721509B..........ea........... 29.95
RH........................... C6TZ-9721508B..........ea........... 29.95
Window Channel Kit (L)
For both doors. 12 pieces.
’66 - ’77
................................ C6TZ-9721460S..........kit.......... 199.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
(M)
(O)
’69 - ’77
(N)
(U)
Body Side Panel Window Weatherstrip (M)
’66 - ’77
’67 - ’77
To serial #W80,001. For vehicles without window mouldings.
LH............................ C6TZ-98305A27B........ea........... 49.95
RH........................... C6TZ-98305A26B........ea........... 49.95
For vehicles with window mouldings.
LH............................ C7TZ-98305A27A........ea........... 49.95
RH........................... C7TZ-98305A26A........ea........... 49.95
(V)
(W)
Tailgate Weatherstrip
Side
Includes installation screws.
’66 - ’68
(U)........................... C6TZ-9843730B..........pr.............. 4.95
NOTE: For ’69 - ’77 side, see Liftgate Weatherstrip #C8TZ-9841626A.
Lower
1" wide. Includes installation screws. Requires one per vehicle.
Body Side Panel Window Opening
Lower Weatherstrip (N)
’66 - ’77
Goes between top of bed side and top.
’66 - ’77
................................ C6TZ-98278C94..........pr............ 29.95
Back Glass Weatherstrip (O)
’66 - ’77
’67 - ’77
’67 - ’77
For back glass without moulding.
................................ C6TZ-9842084B..........ea........... 49.95
For back glass with moulding.
One-piece, molded.
................................ C7TZ-9842084A..........ea........... 49.95
Half-cab.
For vehicles without chrome groove.
................................ C7TZ-9742084B..........ea........... 49.95
For vehicles with chrome groove.
................................ C7TZ-9742084A..........ea........... 49.95
(P)
(X)
(R)
’66 - ’68 Liftgate Weatherstrip
Side Drain
’66 - ’68
’69 - ’77
Weatherstrip kits are offered at a substantial discount over purchasing
items individually.
NOTE: Items cannot be substituted, added to or subtracted from these
kits. Return of individual items will be handled with replacements only.
No partial refunds.
’66 - ’68
(T)
’69 - ’77 Liftgate Weatherstrip
Liftgate Weatherstrip
Upper and Side
’66 - ’68
’69 - ’77
(P)........................... C6TZ-98404A06B........ea........... 24.95
Also includes tailgate.
(Q)........................... C8TZ-9841626A..........ea........... 24.95
On body.
(W).......................... C6TZ-9843964.............pr............ 44.95
On tailgate.
(X)........................... C8TZ-9843896.............pr............ 42.95
Weatherstrip Kits
(Q)
(S)
(V)........................... C6TZ-9843730A..........ea............. 9.95
Standard cab without window moulding.
Kit includes:
• LH and RH headlamp splash shields
• air vent inlet duct seal kit
• LH and RH air vent inlet seals
• cowl weatherstrip
• windshield frame lower seal
• windshield weatherstrip without moulding
• windshield frame top seal
• LH and RH roof rail weatherstrip
• LH and RH door weatherstrip
• LH and RH vent window weatherstrip (includes the back of
edge of window seals)
• window channel kit (includes the back edge of vent channel,
lower front glass channel, lower rear door glass channel,
door glass run and beltline weatherstrip)
• LH and RH body side panel weatherstrips
• LH and RH body side panel window opening lower weatherstrips
• back glass weatherstrip without mouldings
• liftgate weatherstrip (upper, side, and tailgate)
• lower liftgate weatherstrip with installation screws
• liftgate-to-side panel drain weatherstrip
• lower tailgate weatherstrip with installation screws
• drain weatherstrip (on tailgate)
................................ WSKITBR66-1.............kit.......... 695.00
** Weatherstrip Kits are continued on the next page. **
Lower
Includes installation screws.
’66 - ’68
’69 - ’77
(R)........................... C6TZ-9842289B..........ea........... 29.95
(S)........................... C9TZ-9842232A..........ea........... 44.95
Side Drain
’69 - ’77
Liftgate-to-side panel drain weatherstrip.
(T)............................ C8TZ-9840452B..........pr.............. 5.95
AUTO KRAFTERS PRICE MATCH GUARANTEE
We pride ourselves in offering the best quality parts at the
lowest prices possible. If our prices are not already lower,
we will match any competitor’s price on like-quality parts.
Prices matched must be current and verifiable from the competitor’s web site.
Price corrections must be made before purchase is made.
No refunds on previous orders.
www.autokrafters.com
WEATHERSTRIP
’66 - ’68
WEATHERSTRIP
Weatherstrip Kits Continued
’67 - ’68
’69 - ’77
’69 - ’77
Standard cab with window moulding.
Kit includes:
• air vent inlet duct seal kits
• LH and RH of air vent inlet seals
• top and lower windshield frame seals
• windshield weatherstrip (accommodates moulding)
• LH and RH vent window weatherstrip (includes back edge
of window seal)
• window channel kit (includes back edge of vent channel,
• LH and RH body side panel weatherstrip
• LH and RH body side panel window opening lower weatherstrip
• back glass weatherstrip (accommodates moulding)
• upper, lower and side liftgate weatherstrip
• side drain liftgate weatherstrip (on body)
• side and lower tailgate weatherstrip (includes screws)
................................ WSKITBR67-1.............kit.......... 699.00
Standard cab without window moulding.
Kit includes:
• air vent inlet duct seal kits
• top and lower windshield frame seals
• windshield weatherstrip without moulding
• LH and RH vent window weatherstrip (includes back edge
of window seal)
• LH and RH body side panel window opening lower weatherstrip
• back glass weatherstrip without moulding
• upper, tailgate and side liftgate weatherstrip
• side drain liftgate weatherstrip (on body)
• drain weatherstrip (on tailgate).
................................ WSKITBR69-2.............kit.......... 699.00
Standard cab with window moulding.
Kit includes:
• windshield frame lower seal
• windshield frame top seal
• LH and RH vent window weatherstrip (includes the back of
edge of window seals)
• window channel kit (includes the back edge of vent channel,
• LH and RH body side panel window opening lower weatherstrips
• back glass weatherstrip (accommodates moulding)
• liftgate weatherstrip (upper, side and tailgate)
• lower liftgate weatherstrip with installation screws
• drain weatherstrip (on tailgate).
................................ WSKITBR69-1.............kit.......... 699.00
WEATHERSTRIP KITS Continued
’66 - ’77
’66 - ’77
Half-cab without moulding or chrome groove back glass.
Kit includes:
• windshield weatherstrip (without moulding)
• lower and top windshield frame seals
• LH and RH vent window weatherstrip (includes the back
edge of window seal)
• back glass weatherstrip without chrome groove.
................................ WSKITBR66-2.............kit.......... 499.00
Half-cab with moulding and chrome grooved back glass.
Kit includes:
• lower and top windshield frame seals
• LH and RH vent window weatherstrip (includes the back
edge of window seal)
• back glass weatherstrip with chrome groove.
................................ WSKITBR67-2.............kit.......... 499.00
Exterior Gasket and Pad Kit
24 piece kit includes:
• 2 lock cylinder gaskets
• 2 wiper pivot-to-windshield gaskets
• 1 license plate lamp lens gasket
• liftgate door handle pads
• door handle pads
• 2 parking lamp lens housing gaskets
• 2 taillight lens housing gaskets
• 2 parking lamp gaskets
• 1 tailgate handle gasket
• 10 side marker lamp gaskets (inner and outer).
’66 - ’77
................................ BR109..........................kit............ 23.95
Windshield Wiper Pivot-toWindshield Frame Gaskets
’69 - ’77....C9TZ-17541.................pr.............. 2.95
C1AB-13211A
Parking Lamp Lens Gaskets
’66 - ’68
’69 - ’77
B9C-13211B
................................ C1AB-13211A..............pr.............. 3.95
................................ B9C-13211B................pr.............. 5.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
Parking Lamp Body-to-Grille Pads
’69 - ’77
................................ C9TZ-13217A..............pr............ 24.95
High quality black adhesive. Strong, flexible,
and rubbery. Can withstand vibration and
extreme temperature variations. It can be used to hold automotive weatherstripping and is a great adhesive for holding paper, cork, or rubber gaskets
in place during installation. Recommended for all weatherstrip installation
except windshield and back glass.
5 oz. tube ................................ 3M08008......................ea............. 6.95
C7TZ13461A
C4TZ13461A
Taillight Lens-to-Housing Gaskets
’66
’67 - ’77
................................ C4TZ-13461A..............pr.............. 7.95
................................ C7TZ-13461A..............pr.............. 7.95
Auto Bedding & Glazing Compound
This black adhesive is a non-hardening, water-resistant, medium-bodied
product. Use for sealing auto body seams and between windshield
rubber and the car body. It can also be used to seal around mouldings
and to attach door water shields. Remains permanently soft and pliable
to absorb movement in the auto body. Cleans up with a dry cloth. Use
with a cartridge applicator gun (caulking gun).
10 oz. cartridge............................ 3M08509......................ea........... 10.95
Bumpers, Plugs and Grommets
64HP
C6TZ-18813PAD
Antenna Mount Pad
Injection-molded rubber with a beaded edge.
’66 - ’77
................................ C6TZ-18813PAD.........kit.............. 5.95
Door Handle Pads
’66 - ’77
................................ 64HP............................set............. 4.95
Consists of 4 bumpers and 4 screws.
’68 - ’72
............................... C8ZZ-6560310.............kit.............. 7.95
Glove Box Door Bumpers
Liftgate Door Handle Pad
’67 - ’77
Seat Stop Bumper Kit
From serial #A42,001.
................................ C6TZ-9122428A..........ea............... .95
’66 - ’77
................................ C3UZ-8906162A..........pr.............. 4.95
Door Window Glass Lower Bumpers
D4TZ-9793A
C6OZ-7A533C
C6TZ-3513
’66 - ’77
................................ C6TZ-9721762A..........pr.............. 2.95
Accelerator Rod-to-Firewall Seal
’66 - ’77
289 or 302............... D4TZ-9793A................ea........... 15.95
Clutch Pedal Rod-to-Floor Seal
’68 - ’77
(B)
’66 - ’72
Hood
Bumpers
................................ C6OZ-7A533C.............ea........... 10.95
(A)
Steering Column-to-Floor Seal
’66 - ’72
................................ C6TZ-3513...................ea........... 17.95
C1VY-16763A
Can’t find the parts
you’re looking for?
TRY SEARCHING OUR
WEB SITE!
New parts are added every week!
C5ZZ-16763B
C6TZ-16758A
Hood Bumpers
Fender Apron-to-Hood Bumpers (A)
Stud type. Requires 1 pair per vehicle.
’66 - ’72
’73 - ’77
................................ C1VY-16763A..............pr.............. 9.95
................................ C5ZZ-16763B..............pr.............. 5.95
Hood Side Bumpers (B)
’66 - ’77
Requires 1 pair per vehicle.
................................ C6TZ-16758A..............pr.............. 2.95
WEATHERSTRIP / BUMPERS / PLUGS / GROMMETS
Weatherstrip Adhesive
BUMPERS / PLUGS / GROMMETS
c6tz-16993a
c8tz-16993b
c4tz-9944482a
Tailgate Bumpers
’66 - ’68
’69 - ’77
’66 - ’77
Taillight Wiring Grommet
’66 - ’77
Requires 2 per vehicle.
................................ 378996S......................ea............. 1.95
Upper. Requires 1 pair per vehicle.
................................ C6TZ-16993A..............pr ............. 2.25
Upper and lower.
Set of 4.................... C8TZ-16993B..............set............. 6.95
Lower support arm. Requires 2 per vehicle.
................................ C4TZ-9944482A..........ea............. 5.95
’66 - ’68
Grommet
E7AZ-6A892A
Typical 170
and 200 CID
PCV System
C7AZ-6A892B
C8AZ-6A892
D0OZ-6A892B
C6TZ-9840452A
PCV Grommets
’66 - ’77
c9tz-9840481a
380478s
’68 - ’77
’69 - ’77
Liftgate Bumpers
’66 - ’68
’66 - ’77
’69 - ’77
’67 - ’70
Liftgate side and body side.
Set of 4. Includes 8 installation screws.
................................ C6TZ-9840452A..........set............. 9.95
Liftgate-to-liftgate prop. Requires 2.
................................ 380478S......................ea............. 1.50
Liftgate latch on tailgate.
Rubber.................... C9TZ-9840481A..........ea............... .95
’69 - ’71
6- or 8-cylinder. Used with valve covers and oil filler caps
that have a 1" round hole.
............................... E7AZ-6A892A..............ea............. 3.95
8-cylinder with twist-in hole.
............................... C7AZ-6A892B..............ea............. 4.95
6- or 8-cylinder with oil cap that accepts elbow.
............................... C8AZ-6A892................ea............. 2.95
302 2/B.
D-shaped................. D0OZ-6A892B.............ea............. 3.95
PCV Grommet Kit
Used with valve covers that do not include grommets (see page 52).
’66 - ’77
Clutch Pedal Arm Bumper
’66 - ’77
................................ D1TZ-7583A................ea............. 9.95
V8............................ M6892F........................kit.............. 6.95
Brake Booster Check Valve Grommet
‘73 - ‘77........................................ 600706.........................ea............. 2.50
Here’s what our customers are saying about us...
Front Axle Bumper
’66 - ’77
Requires 2............... C1TT-3020C................ea.............9.95
“This was our first time ordering from you, other than getting
our catalog... [We were] very satisfied, and everything arrived
earlier than we expected. We’ll be ordering a lot more in the
future.”
– Bobby D.
Auto Krafters, Inc.
Gold Card Club
Rear Axle Bumper
’66 - ’77
Requires 2............... C1TT-4730B................ea............. 9.95
• Save 10% on our already low prices*
• Get expedited order shipping
• Free Shipping*
JOIN THE AUTO KRAFTERS GOLD CARD CLUB TODAY!
Ask your salesperson for more information!
*Some exclusions apply.
ORDER TOLL FREE 1 - 800 - 228 - 7346
Corbeau Seats
For over 30 years, Corbeau has offered some of the finest automotive
seats at reasonable prices.
Seats will come with mounting brackets for your vehicle. Prices for the
seats do not include prices for mounting hardware. Prices for mounting
hardware will depend on the make, year and model of your vehicle. You
will be notified of the complete price for seats and hardware before seats
are shipped.
When ordering, please note the style of seats, make, year and model of
your vehicle and color plus any options.
Replacement Upholstery
Buckets and bench upholstery available. Made from quality materials
here in the USA, and reproduced using patterns as close to original as
possible. Please allow 3 to 4 weeks for delivery.
NOTE: These are special-order items only and non-returnable except for
manufacturer’s defects.
Colors available are Black or Parchment ONLY. Please specify color choice
by adding color code after the hyphen in the part number when ordering
(example: UP98BRFT-01BK for ’68 Bronco front buckets only in black).
NOTE: Nothing with cloth inserts is available.
Upholstery includes covering only and does not include seat frame
or foam. As all upholstery is custom-made to your specification,
it is NON-RETURNABLE unless defective. Upholstery is a specialorder item only. Defects due to workmanship or mis-packaging will
be replaced as a warranty item. Refunds are not available.
’66
’68 - ’77
Sport Seat
Front buckets only.
Available in Black (01) or Parchment (06).
............................... UP66BRFT- BK.........pr.......... 199.95
Front buckets and rear bench.
............................... UP66BR- FRBK.........set......... 309.95
Front buckets only.
................................ UP68BRFT- BK.........pr.......... 199.95
Front buckets and rear bench.
................................ UP68BR- FRBK.........set......... 309.95
GTS II
Sport Seat
The most affordable reclining seat. It is also
very durable and includes a double locking
mechanism.
Standard features include:
• powder-coated tubular steal frame
• injection-molded foam
• infinitely-adjustable reclining mechanism with
flip-forward for rear access
• adjustable headrest.
Available in uncovered or black vinyl only.
Option: inflatable lumbar.
UPHKIT
Seat weighs 23 lbs.
AK168
Upholstery Installation Supplies
Professional hog ring pliers and enough hog rings to do one installation.
................................ UPHKIT........................kit............ 22.95
Extra hog rings. 8 oz. package..... AK168..........................pkg............ 3.95
Uncovered ................................ 90000...........................ea......... 209.95
Black vinyl ................................ 90010...........................ea......... 289.95
Inflatable lumbar option (not included in above prices).
................................ 21004...........................ea........... 65.00
GTS II
A thickly padded reclining seat, with deep side
and lateral bolsters providing maximum comfort
and support.
Seat Back Trim Panel
Excellent reproduction made of molded ABS plastic
with grain texture exactly like original. Available in
black only, but you may paint to match ABS plastic with
any solvent based paint. Includes fasteners.
’66 - ’77
• fully-adjustable reclining back with flip-forward
for rear access
• adjustable headrest.
LH or RH................. C7TZ-8160762.............ea........... 49.95
Available in black cloth only. Option: inflatable
lumbar.
Seat weighs 27 lbs.
SF65MU
SF68MUPI
Seat Foam
This high quality, cold-molded seat foam is reproduced from original
Ford parts for original appearance and comfort.
’66
’68 - ’77
................................ SF65MU.......................ea........... 49.95
................................ SF68MUPI...................ea........... 59.95
Black cloth ................................ 20301...........................ea......... 304.95
................................ 21004...........................ea........... 65.00
“I always get friendly, knowledgeable service. No need to
shop anywhere else.”
– Stephen W.
INTERIOR
Upholstery
INTERIOR
Corbeau Seats Continued
A4
GT7
Corbeau Seats Continued
Targa RS
A4
Baja SS
A snug-fitting, touring seat with a fully-reclining
back and excellent lateral support with low side
bolsters and a low-profile design. Perfect for tight
spaces and minimal headroom applications.
A fully-padded suspension-style seat that is
excellent for off-road applications. The comfort
and durability of this seat is superb.
• powder-coated steel frame
• heavy vinyl and cloth coverings
• 5-point harness capable
Available in black vinyl only.
• 2 harness slots for race harness,
• infinitely-adjustable reclining mechanism with
flip-forward
• shoulder and kidney support
• high-wear patches
Available in black cloth only.
Seat weighs 18 lbs.
Black vinyl ................................ 65401...........................ea......... 184.95
Seat weighs 25 lbs.
Typical
Corbeau®
Seat Bracket
Black cloth ................................ 60091...........................ea......... 299.95
GT7
An excellent touring seat with the ability to run
a full harness. This fully-reclining seat is extremely comfortable and functional.
• integrated headrest
• 2 harness slots
• fully-adjustable reclining back
Available in black cloth.
Corbeau® Seat Brackets
Solid steel custom brackets used to mount Corbeau® seats to the floor.
Kits include tracks, straight bars and bolts..
’66 - ’77
LH............................ C22055L......................ea........... 99.95
RH........................... C22055R......................ea........... 99.95
Options: inflatable lumbar, wide.
Seat weighs 25 lbs.
Black cloth ................................ 20701...........................pr.......... 779.95
Black cloth – wide........................ 20701W.......................ea......... 399.95
................................ 21004...........................ea........... 65.00
Targa RS
A fully-reclining seat with the look and feel of a race
seat. This ultra-aggressive seat will give you the
style and performance you’ve been looking for.
SHC5
Seat Hinge Covers
’66 - ’77
SHC6
Neutral. Must paint to match.
................................ SHC5...........................set........... 29.95
Black....................... SHC6...........................set........... 29.95
• fully-adjustable back with flip-forward for rear
access
Lift-Handle Type
Push-Button Type
Seat Belts – 60" Long
• shoulder and kidney support
Replacement, not original. Does not work with shoulder straps and does
not include them. Includes hardware.
• integrated harness slots
Available in black cloth or black leather (leather is available in wide only).
Options: inflatable lumbar, wide.
Seat weighs 27 lbs.
Black cloth ................................ 20801...........................ea......... 309.95
Black cloth – wide........................ 20801W.......................ea......... 349.95
Black leather – wide.................... 208LEATHERW...........ea......... 699.00
................................ 21004...........................ea........... 65.00
Lift-Up Handle Release Type
Chrome-plated. Available in Black (SB6001), Red (SB6003), Maroon
(SB6004), Dark Blue (SB6008), Saddle (SB6010) and Aqua (SB6016).
Specify color choice by part number when ordering..........ea........... 29.95
Push-Button Release Type
Steel. Available in Black (SB-01), Maroon (SB-04), Blue (SB-07) and Brown
(SB-11). Please specify color choice by part number when ordering.
......................................................................... ea........... 18.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
Door Panels Continued
Lift-Up Handle Release Seat Belt
Chrome-plated. Available in Black (SB7201), Bright Red (SB7203), Tan
(SB7206), Light Blue (SB7207), Aqua (SB7216), Royal Blue (SB7230) or
Dark Red (SB6031). Specify color choice by part number when ordering.
DT4190-01
.......................................................................ea........... 29.95
DT4191
Like Original
Seat Belt – 74" Long
Push-Button Release Type
Molded plastic replacement, looks like original. Black; must dye for other
colors.
’68 - ’77
Flat.......................... DT4190-01...................pr.......... 129.95
Pleated.................... DT4191........................pr.......... 129.95
Available in Black only....................SB7401......................... ea........... 22.95
Seat Belt Buckle
Restoration Kit
Kit contains 2 buckle surrounds and 2
button covers.
’68 - ’70
Deluxe interior......... C8AZ-65611A72K........kit............ 29.95
Seat Belt Buckle Insert
DP68BR-06D
High Quality Replacement
NOTE: Matches only Upholstery on page 7 and High Quality Replacement
Sunvisors on page 11.
Silver-colored with black circle. Peel and stick.
’68 - ’77
’68 - ’72.................DF1523........................ea............. 6.95
Parchment.
With Mylar inserts.... DP68BR-06D...............ea......... 149.95
With woodgrain inserts.
................................ DP68BR-06W..............ea......... 149.95
Door Panel Clip
C5AZ-6261753BA
’68 - ’77
C5AZ-6262060A
Standard... AV8206........................ea............... .30
Front Seat Adjust Handle Knob and Retainer
’66 - ’77
’66 - ’72 manual bucket seat; ’73 - ’77 two-way manual seat.
NOTE: Retainer is required to install knob.
Knob. Genuine Ford.
................................ C5AZ-6261753BA........ea........... 12.95
Retainer.................. C5AZ-6262060A..........ea............. 2.95
Front Seat Back Latch
Handle Kit
Triple-chrome plated reproduction. Includes
2 handles, 2 bezels and 2 attaching screws.
’68 - ’72
’68 - ’71 with bucket seat; ’72 all.
................................ C8AZ-6262622KIT.......ea........... 24.95
C8AZ-6222634A1A
C8AZ-6222634-A2U
Door Handle Finger Cups
Features molded tabs to secure the cup to the door panel. Molded in
plastic. Requires 1 per door.
’68 - ’77
’69
’69 - ’77
Black....................... C8AZ-6222634A1A......ea............. 9.95
Blue......................... C8AZ-6222634A1B......ea............. 9.95
Parchment............... C8AZ-6222634-A2U....ea............. 9.95
Seat Stop Bumper Kit
Consists of 4 bumpers and 4 screws.
’68 - ’72
................................ C8ZZ-6560310.............kit.............. 7.95
Door Panels
Door Panel Watershields
Poly coated.
’68 - ’77
Replacement
DP68BR-01
Not exactly as original, but a good replacement. Matches Replacement
Seat Upholstery on page 7.
Available in pleated Black (01) beaded vinyl or Parchment (06) pleated,
leather-look vinyl. Please specify color choice by adding color code to
the end of the part number.
’68 - ’77
................................ BR106..........................pr............ 11.95
Trim / Door Panel Remover
Removes any auto-body trim pad instantly. Just insert the tool and pull
the trim pad up............................ 15K127........................ea............. 6.95
** Arm Rest Pads are on the next page **
................................ DP68BR- . .................pr............ 99.95
INTERIOR
Seat Belts – 72" Long
INTERIOR
10
C6TZ-9623574
C6TZ-9623574BK
DT4193
Interior Quarter Trim Panels
Door Check Straps
NOTE: There is a $10.00 boxing fee for these items.
’66 - ’77
’68 - ’76
Nylon straps only; must re-use old hardware.
................................ C6TZ-9623574.............pr............ 14.95
Straps with brackets and hardware.
................................ C6TZ-9623574BK........pr............ 24.95
Black....................... DT4193........................pr.......... 169.95
Parchment............... DT4193-06...................ea......... 179.95
Billet Aluminum Door Step Plates
Feature decorative engraved lines and Bronco script painted black in the
center. Includes stainless mounting screws.
’66 - ’77
................................ C6TZ-6513208B..........pr.......... 119.95
Dynamat® Extreme
Heat Shield and
Sound Deadener
Door Hinge and Check Strap Kit
Kit includes 4 stainless, removable-style door hinges, 2 quick release
door check brackets, 2 nylon door straps with stainless anchor brackets
and hardware.
................................ C6TZ-9722800SK........kit.......... 289.95
’66 - ’77
C8TZ-8127541
C8TZ-8127540
Arm Rest Pads
’68 - ’77
Black. Urethane.
LH............................ C8TZ-8127541.............ea........... 29.95
RH........................... C8TZ-8127540.............ea........... 29.95
’68 - ’77
Sport and Ranger.
13" long, parchment. Vinyl.
LH and RH.............. 8127540PARCH..........pr............ 89.95
NOTE: If you need to dye the arm rests to match, we would
recommend purchasing the parchment arm rest.
This thermo-acoustic control material will
give you a cool, quiet ride. Dynamat®
Extreme eliminates road noise and engine
noise giving your vehicle a new feel. Applying
Dynamat® to the sheet metal surrounding your speakers will eliminate
speaker distortion, vibration, rattles and squeaks. Easy peel and stick
application for doors, floor, roof and trunk. Box contains nine sheets for
a total of 36 sq. ft.
................................ 20455...........................box........ 217.95
10005
10007
Dynamat® Extreme Installation Rollers
Helps you get the strongest bond possible when applying Dynamat®.
Wood
Rubber
11⁄8" wide.................. 10005...........................ea............. 9.95
2" wide..................... 10007...........................ea........... 18.95
Heat Shield and
Sound Deadener
C7AZ-6224146
AK236
Arm Rest Mounting Clip and Screws
Clip
’66 - ’77
................................ C7AZ-6224146............ea............. 1.50
72" × 48"
Screw Kit
1 ⁄4 "
This quality heat shield insulation gives owners the
opportunity to use space-age technology in keeping
heat and noise out of their driving and listening environment. Consists of one sheet of 99.5% pure industrial grade aluminum laminated to 3⁄8" padding, achieving the highest reflection of heat
and sound deadening-capabilities when placed with the aluminum side
toward the heat and / or noise source.
Cross-Section
of 72X48
hex head screws.
’66 - ’77
Requires 1 kit per arm rest.
................................ AK236..........................kit.............. 1.00
................................ 72X48..........................ea........... 39.95
Insulator and Sound Deadener
with Bubble Film
Rear Quarter Trim Panel
Upper Mounting Brackets
This reflective foil insulation consists of 2 layers of
polyethylene bubble film sandwiched between two
layers of 99.9% pure aluminum foil, making it 5⁄16"
Cross-Section
thick. Temperature range from 60º F to 180º F. Works
of 72X48BF
great for insulating headliners, floor pans, trunk area,
door panels, kick panels, etc. Cut and form into needed shapes using
scissors and apply with contact cement or weatherstrip adhesive.
’68 - ’76
72" × 48"
................................ DT4194........................pr............ 64.95
................................ 72X48BF......................ea........... 29.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
11
INTERIOR
Typical Floor Mat
82
82019
3M08031
251⁄2"
131
Trim Adhesive
Recommended for installation of carpet, headliners, upper quarter trim
panels, hood insulation, trunk mats, etc. Also recommended for repair of
sunvisors or any where you need a good adhesive.
16 oz. aerosol.............................. 82019...........................ea............. 9.95
Fast Tack 5 oz. tube.................... 3M08031......................ea............. 7.95
161⁄2"
111
207
Carpeted Floor Mats
Carpet mats with vinyl binding. Most original colors available.
Colors available:
• Black (01)
• Dark Blue (08)
• Avocado (16)
Emblems available:
Front
Rear (Cargo Area)
Loop Pile
Material
Cut Pile
Material
Floor Covering – Carpet
Finest quality carpet available. Made from top quality original materials for
a perfect fit and easy installation. Fits 3-speed or automatic transmission.
Colors available:
• Black
• Dark Brown
• Gunmetal Gray
• Blue
• Ivy Gold
• Copper
• Dark Blue
• Dark Green
• Jade
• Saddle
• Avocado
Please specify loop or cut pile when ordering. Please specify color choice
by adding color code to the part number when ordering.
• Red (03)
• Light Saddle (09)
• Gunmetal Gray (23)
• Maroon (04)
• Ivy Gold (12)
• Bronze (42)
• 4×4 (82) • Bronco (131)
• Ford oval (111)
• Ford Racing (207)
4×4 and Bronco emblem printing available in Black (B), Red (R), Silver
(S) or White (W). Ford oval is available in blue and silver only. Ford
Racing emblem is available in red, white and blue only. Emblems are
embroidered on front mats only.
Specify color of carpet and color of emblem printing by using the root
part number followed by the mat color and script color (example: 4-piece
Maroon mat with White emblem = FM4BR-04W).
NOTE: These mats are universal (dimensions shown above) and
are NOT a custom fit. They are made to your color specifications an
are NOT returnable for any reason. Please ask for a color sample
when ordering if you are looking for a particular color. Only defective floor mats will be replaced.
Set of 2
Set of 4
Fronts only.............. FM2BR- ....................pr............ 89.95
Front and rear......... FM4BR- ....................set......... 114.95
Please specify transmission and whether single- or dual-tank fuel tank
when ordering.
NOTE: All carpet is made to order and is NOT returnable for any reason. Please ask for a color sample when ordering if you are looking
for a particular color. Only defective carpet will be replaced.
Typical
Headliner
NOTE: This is an oversized item. Additional shipping charges apply.
Front only (passenger area).............................................set......... 173.95
Rear only (cargo and wheel well area).............................set......... 144.95
Front and rear (passenger area, cargo and wheel well area).
.....................................................................set......... 259.95
Floor Covering – Vinyl
First-quality vinyl, molded to floor just like carpet for a
perfect fit. Extremely durable and easy to install. Resists
the effects of heat, ultraviolet rays and ozone that are so
Vinyl Material damaging to some other rubber mats. Padded to reduce
heat and noise. Please specify transmission and whether single- or dualtank when ordering.
Headliners
2 pieces: front and rear sections. Includes installation screws. Off-white.
NOTE: There is a $25.00 shipping fee for these items.
’66 - ’68
’66 - ’77
With vacuum wiper motor.
................................ C6TZ-9851966.............ea......... 109.95
With electric wiper motor.
................................ C6TZ-9851716.............ea........... 89.95
SV68BR-06D
NOTE: This is an oversized item. Additional shipping charges apply.
Sunvisors
Front only (passenger area).
Black....................... CP66BR-RMAFT.........set......... 179.95
Tan.......................... CP66BR-TVFT.............set......... 178.95
Rear only (cargo and wheel well area).
Black....................... CP66BR-RMRR...........set......... 149.95
Tan.......................... CP66BR-TVRR............set......... 144.95
Front and rear (passenger area, cargo and wheel well area).
Black....................... CP66BR-RMAFR.........set......... 264.95
Tan.......................... CP66BR-TVFR............set......... 264.95
Reproduction
White.
’66 - ’77
................................ C6TZ-9604104.............ea........... 39.95
High Quality Replacement
Parchment. Matches only Upholstery on page 7 and High Quality
Replacement Door Panels on page 9; they do not match any other upholstery or door panels.
’67 - ’77
................................ SV68BR-06D...............pr............ 69.95
INTERIOR
12
C8ZZ-6501691A
C6TZ-9604110SS
Sunvisor Bracket Rod Sets
Includes 4 rods and attaching hardware.
’66 - ’77
Zinc......................... C6TZ-9604110A..........set........... 26.95
Stainless steel......... C6TZ-9604110SS........set........... 38.95
Sunvisor Tips
’67 - ’72�� VT1..............................pr.............. 2.00
48-7001670CLIP
C6TZ-9602207B
Firewall Insulation Retainers
’69 - ’77
Rubber.................... C8ZZ-6501691A..........ea............. 1.95
Steel........................ 48-7001670CLIP..........ea............. 3.00
Firewall Air Duct Vent Drain Tube
’66 - ’77
................................ C6TZ-9602207B..........ea........... 22.95
Windshield Latch Knobs
’66 - ’77
................................ C6TZ-9603818B..........pr............ 49.95
‘69 - ‘72 Windshield Wiper
Linkage Assembly
E3PZ-18527A
C1UF-18583A
Heater – A/C Blower Motor
2 wires. Single shaft.
’66 - ’77
(A)
With fresh air heater and without dealer-installed A/C.
................................ E3PZ-18527A..............ea........... 39.95
Heater Blower Motor Mounting Gasket
’66 - ’72
................................ C1UF-18583A..............ea............. 5.95
(B)
Windshield Wiper Arm Linkage Clips (A)
’69 - ’77
Genuine Ford....... C5ZZ-17531A..............ea............. 2.95
Reproduction.
.................... AK404..........................ea............. 3.50
Heater Core
61⁄8" × 71⁄4" × 2".
’66 - ’77
Without A/C............. FM9024........................ea........... 49.95
Windshield Wiper Linkage Cover (B)
’68 - ’77
................................ DT4192........................ea........... 69.95
Defroster Hose
21⁄2" diameter. 6' long.................. B5A-18556BX..............ea........... 24.95
Universal Firewall Pad
Moldable 3' × 5' pad, 1" thick.
NOTE: This is an oversize item; additional
shipping charges apply.
...........SR105..........................ea........... 79.95
Firewall Insulation
Heater Seal Kit – All * Pieces
Does not include retainers.
’66 - ’77
................................ C9TZ-9701670.............ea......... 159.95
13 pieces.
’66 - ’77
................................ BR107..........................kit............ 16.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
13
NOTE: These are included in Heater Seal Kit #BR107
on previous page. If you are ordering BR107, you do not
need this seal.
’66 - 77................8C-18595.....................ea............... .95
Defroster Control Cable Assembly
Heater Hose Clamp
Bezel features the words “PULL FOR DEFROST.” Knob not included.
’66 - ’77................HC209..........................ea............. 3.00
’68 - ’72
Dash Area Components
HH68R
HH65W Detail
................................ C8TZ-18552A..............ea........... 24.95
HH69R
Instrument Cluster Light Bulb
Socket
’68 - ’77...............C8OZ-13711A..............ea............. 2.50
HH70Y
HH71Y
Heater Hoses
Ribbed hoses with correct date codes, unless otherwise noted.
’66 - ’67
’68
’69
’70
’71 - ’77
White stripe. 5⁄8" I.D. Without date code. Two 4' lengths.
................................ HH65W........................pr............ 24.95
Red stripe with Autolite date code. One 8' length.
................................ HH68R.........................ea........... 24.95
................................ HH69R.........................ea........... 24.95
Yellow stripe with Autolite date code. One 8' length.
................................ HH70Y.........................ea........... 24.95
................................ HH71Y.........................ea........... 24.95
Temperature Control Cable-to-Firewall Seal
’66 - ’77
................................ 352963S......................ea............. 1.95
C8TZ-18518B
Electro-luminescent Gauge Face Set
This 5-gauge set lights up and glows, improving the visibility of gauges.
Features variable brightness controls and color change from soft blue to
soft green. Includes speedometer, fuel, temp, oil pressure, and alternator. Includes instructions.
’66 - ’77
................................ C6TZ-10890GLO.........set........... 99.95
Universal Oil / Voltage / Water
Gauge Kit by SunPro
This Sunpro® Customline™ triple gauge kit features 2", black face oil
pressure, voltmeter and water / oil temperature gauges set within a
chrome bezel with removable panel. Kit includes tubing (6 ft.), 1⁄8" and
1⁄4" NTP pressure adapters, 1⁄2" NTP temperature fitting, mounting hardware and instructions. Voltmeter hookup wire not included. 12-volt internal lighting.
Designed for vehicles with 12-volt negative ground systems.
NOTE: Electrical parts are non-returnable once installed. We will replace
defective units only.
................................ CP7996........................kit............ 24.95
D3TZ-18518C
Heater Control Bezels and Cables
CP7904
Knobs not included.
’68 - ’72
’73 - ’77
Temperature control.
241⁄2" long. Bezel has the words “TEMPERATURE” and
“CONTROL” stamped into the top and bottom. For knob,
see part #C8UZ-17513A on the next page.
............................... C8TZ-18518B..............ea........... 24.95
Air control................ D3TZ-18552B..............ea........... 25.95
Temperature control. For knob, see part #C8UZ-17513A on
the next page.......... D3TZ-18518C..............ea........... 29.95
** For Heater Blower Switch and Cable, see page 25. **
** For Heater Knobs and Related, see page 14. **
CP7901
Super Tach II Tachometers by SunPro
Works on 6- and 8-cylinder 12 volt engines. Reads to 8,000 RPM. The
air core meter returns to zero when ignition is on, and it has internal
illumination.
25⁄8"
33⁄8"
Black face.
............................... CP7906........................ea........... 49.95
White face.
............................... CP7904........................ea........... 49.95
Black face................ CP7901........................ea........... 59.95
White face.
............................... CP7903........................ea........... 59.95
INTERIOR
Heater Hose-to-Firewall Seal
INTERIOR
14
Dash-area Knobs,
Bezels, and Related
Choke Knob
CP7900
CP7905
5" 10,000 RPM Tachometers by SunPro®
’66....................C1TZ-9700................ea............. 6.95
Internal settings for 2-, 4-, 6- and 8-cylinder engines. Features a large 5"
black face with white numbers and a bright red pointer for a quick view.
Ranges from 0 to 10,000 RPM with pointer return-to-zero feature. It has
a vibration-proof air core meter design, making it fast, accurate and reliable. Incandescent back-lighting avoids uneven hot spots for better night
visibility, and the shift light can be repositioned around tach body for best
viewing angle. Housed in a solid metal light gray casing with a smooth
finished dark gray bezel.
Super Tach III
Light gray casing with dark gray bezel.
................................ CP7900........................ea......... 112.95
Sport ST
Chrome finish.............................. CP7905........................ea........... 99.95
C8AZ17A326B
C1TZ-11661L
C8TZ-11661A
Headlamp Switch Knobs
’66
’68 - ’77
C8AZ17A326W
Hood-mounted Tachometers
Classic 1960s-style tachometer with a black plastic housing. Features
a dial face with brightly lit numbers (up to 8000 RPM). Also features a
red-line needle that is manually adjustable. Can be set to the number of
cylinders that correspond to your engine. Fits most any vehicle with a 12
volt conventional ignition system (points and condenser) and most with
“add-on” electronic ignition that will supply a minimum 12 volt, non-multiple
signal to the ignition coil primary winding.
NOTE: Holes must be drilled in your hood for proper installation.
NOTE: All electrical parts are non-returnable once installed. We will
replace defective units only.
With shaft. 31⁄2" long.
................................ C1TZ-11661L...............ea............. 9.95
With shaft. Black knob with reflective insert.
................................ C8TZ-11661A..............ea............. 9.95
Black face................ C8AZ-17A326B............ea......... 349.95
White face............... C8AZ-17A326W...........ea......... 349.95
C1TF-10852C
C3TZ-11650A
Headlamp Switch Bezel and Bezel Nuts
Headlamp Switch Bezel
’66 - ’72
Stock for ’66, but will work on ’67 - ’72 as well.
................................ C1TF-10852C..............ea........... 15.95
Headlamp Switch Bezel Nuts
Insert that screws into headlamp switch and hold switch bezel in place.
’66
’68 - ’72
................................ C3TZ-11650A..............ea........... 15.95
................................ C3TZ-11650A..............ea........... 15.95
** For Headlamp Switch, see page 25. **
** For Tachometer Wiring, see page 24. **
Dash Pad
Heavy duty black urethane with galvanized backing. OEM-correct replacement dash pad.
NOTE: Will work in ’66 - ’67, but holes must be drilled first.
NOTE: There is a $10.00 per order boxing fee for this item.
’68 - ’77
................................ C8TZ-9604282-01.......ea......... 249.95
Dash Cover
Custom designed molded black plastic dash board cover. Features a
contoured fit, correct texture, thick and durable. Fits right over the existing dash. No need to remove the dash or instruments and no need for
special tools. Black; must dye for other colors.
NOTE: There is a $10.00 per order boxing fee for this item.
’67 - ’77
................................ DT419..........................ea........... 99.95
Carburetor Choke Bezel and Cable
Cable is cut to fit. Does not include knob. For ’66 knob, see #C1TZ-9700;
for ’68 - ’69 knob, see #C8UZ-17513A. The correct knob for 1967 is not
available, but #C8UZ-17513A will work.
’66 - ’69
................................ C5TZ-9700L.................ea........... 24.95
C1TZ-17513
C8UZ-17513A C5UZ-18598A C1UF-18545A
Heater Knobs and Related
Heater Knobs
’66
’66
’69 - ’77
Heater temperature control and heat control knob.
................................ C1TZ-9700...................ea............. 6.95
Heater fan............... C1TZ-17513.................ea............. 9.95
Heater control knob from serial # D82,001.
................................ C8UZ-17513A..............ea........... 19.95
Heater Control Bezel
States “FAN OFF HI LOW” at top and “PULL FOR HEAT” at bottom.
’68 - ’77
................................ C5UZ-18598A..............ea........... 15.95
Heater Switch Bezel Nut
’66 - ’77
................................ C1UF-18545A..............ea............. 8.95
** For Heater Switch, see page 25. **
** For Heater Cable and Bezel, see page 13. **
ORDER TOLL FREE 1 - 800 - 228 - 7346
15
Cigarette Lighter Knob
C8TZ10852C
’66.....................C1TZ-15052.................ea............. 7.95
Emergency Flasher Switch Knobs and Related
Emergency Flasher Switch Knobs
’66
’70 - ’77
................................ C1TZ-17513.................ea............. 9.95
................................ C8UZ-17513A..............ea........... 19.95
Emergency Flasher Switch Bezel
’68 - ’72
................................ C8TZ-10852C..............ea........... 15.95
B6C-15055
C4AZ-15055
Cigarette Lighter Element and Well Assembly
’66 - ’77
12 volt...................... B6C-15055...................ea............. 9.95
Cigarette Lighter Well Assembly
’66 - ’77
Windshield Wiper Control Related
................................ C4AZ-15055................ea............. 5.95
Windshield Wiper Switch Knobs
’66
’68 - ’77
................................ C1TZ-17513.................ea............. 9.95
................................ C8UZ-17513A..............ea........... 19.95
Cigarette Lighter Kit
Includes knob, bezel, element and well. Made exactly like the original.
’68 - ’77
C1TF-10852D
D0TZ-10852A
................................ D3TZ-15A044A............kit............ 24.95
D3UZ-10852A
Windshield Wiper Switch Bezels
’67 - ’68
’68 - ’72
’73 - ’77
Has “Wipers” at the top.
............................... C1TF-10852D..............ea........... 14.95
Has “WIPER WASHER” at the top.
................................ D0TZ-10852A..............ea........... 15.95
................................ D3UZ-10852A..............ea........... 15.95
Windshield Wiper Control Nut
’66 - ’77 With electric wipers.
............................D7TZ-17512A..............ea............. 7.95
BR101
BR102
Glove Box Liners
’66 - ’71
’72 - ’77
................................ BR101..........................ea........... 14.95
................................ BR102..........................ea........... 14.95
** For Windshield Wiper Switch, see page 25. **
** For other wiper-related parts, see page 27. **
** For windshield washer-related parts, see page 42. **
Front
’66 - ’77
Back
C8TZ-18817A
Glove Box Door Bumpers
C3TZ-18830A
Radio Knob and Bezels
................................ C3UZ-8906162A..........pr.............. 4.95
Under-dash Courtesy Lamp Bracket
’66 - ’77
................................ C0AZ-13763A..............ea............. 8.95
Radio Knob
’68 - ’77
With split shaft......... C8TZ-18817A..............ea........... 12.95
Radio Knob Bezels
Speedometer Cable
Black plastic.
’66 - ’77
71" long. Speedometer gear sold separately.
................................ C3TZ-18830A..............pr............ 24.95
’66 - ’77
................................ C5TZ-17260Y..............ea........... 34.95
** For Radio Antenna and Related, see page 27 **
Brake Warning Bezel and Lens
Red lens.
’67..................D5TZ-10A840A............ea........... 27.95
Speedometer Cable Lube
Specially formulated, calcium-based grease packaged in a convenient-touse, single-dose tube. Safe for use on all cables in all temperatures – will
not freeze in cold or run in hot temperatures. Eliminates vibration and noise
and helps prevent corrosion and rust.
5 g tube.
................................ CA5000........................ea............. 1.50
INTERIOR
Cigarette Lighter Parts
INTERIOR
16
Grant® Signature Series Steering Wheels
Continued
Speedometer Cable-to-Firewall Seal
’66 - ’77
760
714
................................ C6TZ-17261.................ea.............3.95
GT
C0DZ-17271A
Speedometer Gears
3-spoke with silver anodized aluminum spokes. Dish size: 3". Includes
styling sleeve.
C0DZ-17271B
Right tilt.
16 teeth
17 teeth
18 teeth
19 teeth
20 teeth
Burgundy................. C0DZ-17271A..............ea............. 9.95
White....................... C3DZ-17271C..............ea............. 9.95
Yellow...................... C0DD-17271B.............ea............. 9.95
Pink......................... C0DZ-17271B..............ea............. 9.95
Black....................... C1DZ-17271A..............ea............. 9.95
Rally style with black grip.
13" diameter.
............................... 760...............................ea......... 109.95
Mahogany grip.
14" diameter............ 714...............................ea......... 189.95
739
742
Speedometer Driven Gear Retainer Clip
C-type clip.
’66 - ’77
................................ C1DZ-17292A..............ea............. 2.95
Elite GT
Features hand-stitched leather-grained grip. Dish size: 33⁄4". Includes
styling sleeve.
3-spoke
4-spoke
14" diameter............ 739...............................ea......... 167.95
14" diameter............ 742...............................ea......... 179.95
Steering Wheel
Black, 2-spoke. Made in the USA.
’75 - ’77
Without speed control.
................................ D4TZ-3600A................ea......... 259.95
Grant® Signature Series Steering Wheels
European-influenced designs that add style and elegance to any vehicle.
Available in a variety of individual designs and materials. Universal.
1130
GRT1180
4-spoke
14" diameter............ GRT1070.....................ea......... 179.95
Grant® Classic Series Steering Wheel
Leather Grip
Polished aluminum spokes with genuine leather grip. Dish size: 33⁄4".
Includes styling sleeve.
14" diameter............ 1130.............................ea......... 179.95
14" diameter............ GRT1150.....................ea......... 229.95
143⁄4" diameter........ GRT1180.....................ea......... 234.95
Mahogany Grip
Polished aluminum spokes with mahogany grip. Dish size: 3". Includes
styling sleeve.
3-spoke
Highly polished aluminum spokes with black rim. Dish size: 33⁄4". Includes
styling sleeve.
1170
Collector’s Edition
3-spoke
4-spoke
Le Mans
14" diameter.
............................... 1170.............................ea......... 209.95
Features a timeless high-performance look. Chrome-plated CRS steel
spokes with genuine hardwood grip with walnut finish and anodized aluminum rivets. Dish size: 33⁄4". Universal.
3-spoke
131⁄2" diameter........ 213...............................ea......... 124.95
Auto Krafters’ catalogs are now available
online in PDF format!
Just visit our website at
ORDER TOLL FREE 1 - 800 - 228 - 7346
17
(B)
Typical Steering
Wheel Assembly
3294
(E)
Grant Steering Wheel Installation Kit
®
Necessary for installation of Grant steering wheels. Includes instructions.
’67 - ’74
’75 - ’77
................................ 3294.............................kit............ 24.95
. ............................. 3285.............................kit............ 24.95
(B)
(A)
C0DZ-13A813A
5665
5875
®
Grant Ford Logo Horn Buttons
(C)
(F)
(C)
D1TZ-13A809B
C5AZ-13867A
GRT5615
(D)
Made of billet aluminum and features the Ford logo. For Grant steering
wheels only.
(E)
(F)
Signature Series Horn Buttons
For use with Signature Series steering wheels only.
C0DZ-13A807B
C5AZ-13A811A
Black plastic................................ 5665.............................ea........... 23.95
Billet aluminum............................ 5875.............................ea........... 39.95
Horn Ring Parts
Classic Series Horn Buttons
Horn Blowing Ring Insulator (A)
For use with Classic and Challenger Series steering wheels only.
’66
................................ C0DZ-13A813A...........ea............. 9.95
Billet aluminum............................ GRT5615.....................ea........... 44.95
Chrome
................................ 5685.............................ea........... 14.95
Ring Retainer (B)
Grant® Logo Billet Horn Buttons
Lower Contact Insulator (C)
’66 - ’72
................................ D1TZ-13A809B............ea............. 2.00
Made of billet aluminum and features Grant logo. For Grant steering
wheels only.
Genuine Ford.
Signature Series Horn Button
Horn Ring Spring (D)
Billet style. Designed to be used as a dress-up accessory on any Grant
Signature Series wheel. Includes Signature silver logo horn button and
mounting hardware. For use with Signature Series steering wheels only.
................................ 5885.............................ea........... 26.95
C5AZ-13A823F
’67 - ’77
’67 - ’74
................................ C5AZ-13867A..............ea............. 4.95
................................ C0DZ-13A807B...........ea............. 3.95
Horn Blowing Cam Ring (E)
’66 - ’74
................................ C5AZ-13A811A............ea........... 21.95
Horn Switch Brush Inner Plate (F)
Classic Series Horn Button
Polished billet style horn button with Grant logo. For use with Classic
Series steering wheels only......... GT5860........................ea........... 37.95
Genuine Ford.
’66 - ’74
................................ C5AZ-13A823F............ea........... 21.95
Column Shifter Parts
D3TZ-13A805A
D3TZ-13A805B
D5TZ-13A805A
Horn Pads
Without Horn Switch
Fits 2-spoke steering wheel. Features the Ford oval in the center.
’75 - ’77
Camera case black D3TZ-13A805A............ea......... 109.95
Woodgrain............... D3TZ-13A805B............ea......... 129.95
With Horn Switch
Fits 2-spoke steering wheel. Features the Ford oval in the center.
’75 - ’77
’75 - ’77
Brown...................... D3TZ-13A805BS.........ea......... 109.95
With speed control.
Woodgrain............... D5TZ-13A805A............ea......... 199.95
C0DZ-7228B
D5TZ-7228A
Shift Collars
Includes lever pin. Paint to match.
’66 - ’77
M/T.
Import...................... C0DZ-7228B................ea........... 49.95
’73 - ’77
8-cylinder A/T.
Import. Includes indicator.
................................ D5TZ-7228A................ea........... 34.95
INTERIOR
(D)
(A)
INTERIOR
18
Typical Upper
Steering Column
D3TZ-7A110A
D4TZ-7B033A
(B)
(D) (A)
C3DZ-3517A
(C)
D3TZ-7A004A
F23Z-3517B
Transmission Shift Selector Parts
Transmission Shifter Dial
Clear with “P-N-D-2-1” in white. Reproduction.
’74 - ’77
8-cylinder C4........... D4TZ-7B033A..............ea........... 21.95
Shift Indicator
’74 - ’77
C4............................ D3TZ-7A110A..............ea........... 12.95
B1AZ-3518A
Shift Indicator Cover
’74 - ’77
A/T........................... D3TZ-7A004A..............ea........... 15.95
Upper Steering Column Parts
Genuine Ford.
(AA)
(AA)
C2AZ-7B125A
(BB)
(BB)
(BB)
1M-7246A
C2OZ-7246A
Gear Shift Lever Trunnion (AA)
3-speed................... C2AZ-7B125A..............ea............. 5.95
Column Gear Shift Lever Insulators (BB)
’66 - ’77
’73 - ’77
C3DZ-3520A
Steering Column Bearings (A)
Typical Column Shifter
Assembly
’70 - ’73
E2AZ-3518C
Rubber. 21⁄16" long.
................................ 1M-7246A....................ea............. 6.95
C4 A/T.
1" long × 3⁄4" O.D..... C2OZ-7246A................ea............. 6.95
’66 - ’72
’72
’73
’74
’75 - ’77
M/S.
1" I.D., 17⁄16" O.D., 15⁄32" thick.
................................ C3DZ-3517A................ea............. 4.95
P/S from serial #P40,001.
1" I.D., 17⁄16" O.D., 15⁄32" thick.
................................ C3DZ-3517A................ea............. 4.95
All.
1" I.D., 17⁄16" O.D., 15⁄32" thick.
................................ C3DZ-3517A................ea............. 4.95
M/S.
1" I.D., 17⁄16" O.D., 15⁄32" thick.
................................ C3DZ-3517A................ea............. 4.95
P/S.
3⁄4" I.D., 13⁄16" O.D., 1⁄4" thick.
................................ F23Z-3517B.................ea........... 19.95
All.
3⁄4" I.D., 13⁄16" O.D., 1⁄4" thick.
................................ F23Z-3517B.................ea........... 19.95
Steering Column Bearing Sleeves (B)
Genuine Ford.
’66 - ’73
’74 - ’77
M/S and ’72 P/S...... B1AZ-3518A................ea............. 8.95
’74 - ’75 P/S and ’76 - ’77 with tilt wheel.
................................ E2AZ-3518C................ea............. 5.95
Steering Wheel Collar Spring (C)
Reproduction.
’66 - ’72
................................ C3DZ-3520A................ea............. 5.95
Steering Column Tube Flange (D)
’73 - ’77
Steering Column Covers
A/T from serial #S20,001.
............................... D3TZ-3511D................ea........... 21.95
** For Lower Steering Column Parts, see page 69. **
Upper and lower. Black textured covers that feature raised Bronco script
in chrome on the upper cover. Excellent reproduction.
’68 - ’77
................................ C8TZ-9601698.............set........... 24.95
“Best service in automotive parts, period!”
Auto Krafters, Inc.
is a long-time member of the
Specialty Equipment Market Association
– Baldomero E.
ORDER TOLL FREE 1 - 800 - 228 - 7346
19
(DD)
INTERIOR
(BB)
(EE)
(AA)
C5AZ-9735D
C5AZ-9736
Accelerator Pedal Pad And Trim
(CC)
Pad
Pedal pad only; no stainless trim or hardware.
Typical ’66 - ’71
M/T Column Shifter
Arm Assembly
’66 - ’77
Trim
Stainless steel.
Column Gear Shift Lever Arms
’66 - ’72
With column shift.
2nd and 3rd.
(AA)......................... C5TZ-7302A................ea........... 19.95
Low and reverse.
(BB)......................... C5TZ-7303A................ea........... 19.95
Gear Shift Thrust Washer (CC)
’66 - ’77 Requires 2 per vehicle.
...........................C5TZ-7D363B..............ea............. 2.00
’66 - ’77
Column Gear Shift Insulator Kit (DD)
Includes 2 metal bushings and 2 rubber insulators.
M/T with column shift.
................................ C5TZ-7343A................kit............ 14.95
. ............................. C5AZ-9736..................ea........... 24.95
B7A-2457A
C6TZ-2457BR
Brake Pedal Pads
’66 - ’77
’66 - ’77
................................ C5AZ-9735D................ea........... 14.95
’76 - ’77
D3TZ-2457B
With manual brakes.
Reproduction........... B7A-2457A..................ea............. 4.95
“Bronco” script replacement.
Made from high quality, durable EPDM molded rubber and
is stamped with a sharp, detailed Bronco script. Direct replacement for B7A-2457A.
................................ C6TZ-2457BR..............ea............. 9.95
With power brakes and A/T.
................................ D3TZ-2457B................ea............. 4.95
Clutch Pedal Pads
Column Gear Shift Lever and
Transmission Shift Arm Clip (EE)
Reproduction.
’66 - ’76 With column shift. Requires 4 per vehicle.
.........................379620S100................ea............. 3.50
’66 - ’77
C8SZ-2454B
Steering Column-to-Floor Seal
’66 - ’72
With manual brakes.
Reproduction........... B7A-2457A..................ea............. 4.95
“Bronco” script replacement.
Made from high quality, durable EPDM molded rubber and
is stamped with a sharp, detailed Bronco script. Direct replacement for B7A-2457A.
................................ C6TZ-2457BR..............ea............. 9.95
................................ C6TZ-3513...................ea........... 17.95
Pad
’66 - ’77
D3TZ-13305B
C8SZ-2A798A
Parking Brake Pedal Pad and Trim
Trim
’66 - ’77
................................ C8SZ-2454B................ea............. 3.95
. ............................. C8SZ-2A798A..............ea............. 9.95
C0AZ-13305B
Radios and Related
Turn Signal Lever and Knob
Lever
Chrome lever with tapered black knob that is flared on the end. Genuine
Ford.
’67 - ’77
®
................................ D3TZ-13305B..............ea........... 16.95
Mounts to the inside top of windshield for best
performance.
Black....................... C0AZ-13305B..............ea............. 4.95
NOTE: Radio signals cannot penetrate metal, so
do not attempt to install this under a metal dash.
...............ANTENNAHA...............ea........... 34.95
Knob
’66
Hide-away
Antenna
** Turn Signal Switches are on page 25. **
INTERIOR
20
Hideaway
Radio
Mirror
®
C2SZ17698
Fits in any vehicle. The Secretaudio SST is a
hidden system that offers great flexibility for
mounting in any type of vehicle. The main receiver is usually hidden under the seat, behind the
dash or in the trunk. A 10' cord from the tuner /
amp plugs into an LCD display. The system can be operated from up to
40' away with the included radio frequency remote.
This 200 watt AM / FM CD controller features:
• USB MP3/WMA flash drive
• iPod interface
• direct CD changer control (CD changer sold separately)
• LCD flush mount trim bezel with LCD swivel mount bracket
• 24 station pre-sets
• auxiliary audio input
• alpha-numeric LCD display shows artist and song title for USB, iPod
and satellite radio
• satellite radio input
• zero memory current draw (will not drain battery when unit is not in use)
• and many more features
Ideal for street rods, customs and classic vehicles..
C2SZ-17690F
Typical Mirror Mount Assembly
Rear-view Mirror Arms
Includes 2 arm pieces with screws. OE satin finish.
’68 - ’69
................................ C2SZ-17690F..............ea........... 19.95
C1SZ17698
®
Works with radio #SST3. Operates from the
buttons on this radio.
C1SZ17698G
Rear-view Mirror Brackets
Ball stud mirror mount bracket. Use with mirror arms.
’66 - ’69
Chrome................... C1SZ-17698................ea........... 12.95
Gray metal............... C1SZ-17698G..............ea........... 10.95
Rear-view Mirror Arm and
Ball Stud
Mounting Bracket
................................ SST3............................ea......... 289.95
10-Disc
CD Changer
C2SZ-17690F
Includes 2 mirror arm pieces, 2 screws and mirror bracket. Chrome.
’68 - ’69
................................ C1SZ-17690/8.............ea........... 24.95
Front
Back
This unit features:
• twin digital-to-analog converter • 3-beam laser tracking
• disc select up / down
• track up / down
• 2-way scan and shuffle
• play and pause control
• program repeat
• anti-shock and vibration-free design
• designed for horizontal, vertical or 45º installation
Changer dimensions: 93⁄4" W × 31⁄2" H × 63⁄4" D.
C4SZ-17700
C7AZ-17700
................................ CDCHANGER10..........ea......... 259.95
JVC® CD Changer
This 12-disc changer has its own power amplifier and works with almost any FM stereo
on the market. Includes wireless control. 30
watts per channel front and rear for a total of 120 watts of power! Comes
with one 12-disc magazine.
’66 - ’77
................................ KDMA1........................ea......... 389.95
C7AZ-17700GIA
Rear-view Mirrors
’66 - ’67
’68 - ’69
’68 - ’69
Day / nite. Chrome.. C4SZ-17700................ea........... 49.95
Day / nite................. C7AZ-17700................ea........... 39.95
Ball-mounted. Use with mirror arm Part #C2SZ-17690FCH
above...................... C7AZ-17700GIA..........ea........... 54.95
Front
UNDERCOVER1
Undercover Speakers
MIR-17
®
Undercover I
One 51⁄2" woofer and one Piezo tweeter in an enclosure that measures
3" high × 81⁄4" wide × 111⁄4" long. 120 watt capacity.
................................ UNDERCOVER1.........pr.......... 119.95
Undercover II
One 8" woofer and 2 Piezo tweeters in an enclosure that measures 3"
high × 11 wide × 121⁄2" long. 200 watt capacity. Offers a fuller, deeper
sound than #UNDERCOVER1.
’66 - ’77
Back
UNDERCOVER2
Designed specifically for under-seat or horizontal “wall” installations.
’66 - ’77
76990
................................ UNDERCOVER2.........pr.......... 139.95
Universal Replacement Mirrors
Day / nite. Black. Not as original. Glues to windshield. Includes bracket
and mounting button. Glue not included.
10"........................... MIR-17.........................ea........... 29.95
12".......................... 33000...........................ea........... 29.95
Universal Replacement Mirror Bracket
Metal. Glues to windshield. Included with Universal Replacement Rear-view Mirror #MIR-17 (see above).
................................76990...........................ea............. 2.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
21
OEM specified. This two-part application permanently
remounts rearview mirrors to the windshield. Achieves
handling strength in seconds and mirror mounting
strength in only 15 minutes. Also bonds metal and plastic buttons.
INTERIOR
Door-area Parts
Rear-view Mirror Adhesive
Typical Sport
Mirror Assembly
0.04 oz................110672.........................ea............. 3.25
Floor Shifter Parts
Remote Control Sport Mirror Bezel Nut
Chrome.
’70 - ’72
With sport mirror...... C9TZ-17B732A............ea........... 24.95
B&M Starshifter®
Includes a neutral safety switch, transmission brackets and levers, and
a 5' shift cable.
C8TZ-9723201A
NOTE: This is a universal part; some modification may be necessary.
C4 or C6.................. KY80675......................ea......... 169.95
C8TZ-9723200A
Window Regulators
’66 - ’77
LH............................ C8TZ-9723201A..........ea........... 79.95
RH........................... C8TZ-9723200A..........ea........... 79.95
C1TZ-8123342A
C7TZ-8123342A
C8AZ-6223342A
KY3666901
KY3670013
Hurst 3-speed Mastershift Shifter Kit
and Linkage Kit
Shifter
Window Regulator Handles
’66
’67
’68 - ’77
Includes knob.......... C1TZ-8123342A..........ea........... 14.95
Includes knob.......... C7TZ-8123342A..........ea........... 26.95
Knob not included... C8AZ-6223342A..........ea........... 12.95
Includes only shifter and stick, decals, and instructions. Must purchase
installation kit #KY3670013 (below) to complete installation.
’66 - ’77
8-cylinder................. KY3666901..................ea......... 199.95
Linkage Kit
Includes all linkage, mounting hardware, shifter boot and easy-to-follow
installation guide. Use with above shifter #KY3666901.
’66 - ’77
8-cylinder................. KY3670013..................ea......... 159.95
C1TZ-8123345
Window Regulator Handle Knobs
’66 - ’67
’68 - ’77
Black.
Original style with pin.
................................ C1TZ-8123345.............ea............. 4.95
Black....................... C8AZ-6523352C..........ea............. 3.95
Window Crank Handle Screw Cover
Transfer Case Gear Shift Lever Boot
’68 - ’77...................C8AZ-6223362A..........ea............. 1.50
Made in the USA.
’66 - ’77
C8AZ-6523352C
’66 - ’72 6- or 8-cylinder; ’73 - ’77 8-cylinder.
................................ C6TZ-7B059A..............ea........... 24.95
Can’t decide on a gift idea?
How about an Auto Krafters Gift Certificate?
They are available in your choice of dollar amount.
Check online or ask your sales associate today.
Window / Door Handle Screw Kit
4-piece kit. Does all 4 inside handles. Phillips head.
’66 - ’77
................................ AK466..........................kit.............. 1.25
INTERIOR
22
Window / Door Handle Back-up Plate
Plastic washer that fits between handle and door panel. White.
’67
Front with screw-on handle.
................................ C5AZ-6223370A..........ea............. 1.00
C6OZ-6322916-7A
C8OZ-5422917PR
Vent Window Handles
LH and RH. Includes hardware.
’66 - ’67
’68 - ’77
................................ C6OZ-6322916-7A......pr............ 29.95
................................ C8OZ-5422917PR.......pr............ 29.95
Window Handle Clip Removal Tool
Removes any door handle or window regulator clip instantly. Just insert
the tool and push the clip out. One-piece metal construction.
................................ 701-895........................ea............. 5.95
C6TZ9722939
C6TZ9722938
Vent Window Handle Brackets
’66 - ’77
Window Roller
C6TZ9721611
Includes clip.
’66 - ’77
LH............................ C6TZ-9722939.............ea........... 14.95
RH........................... C6TZ-9722938.............ea........... 14.95
................................ 3135A..........................ea............. 1.25
Lower Vent Window Frame Pivots
’66 - ’77
LH............................ C6TZ-9721611.............ea........... 14.95
RH........................... C6TZ-9721610.............ea........... 14.95
Vent Window Pivot Spring
Reproduction.
’66 - ’72�� B5A-7022926A............ea............. 6.95
Typical Window
Assembly
B7C-8122600B
E1HZ-8022600A
Window Lift Channel
Channel that the door window sits in and is moved up or down by the
window regulator. Made of 20-gauge steel with a clear zinc coating to
prevent rust. Spot-welded construction, exactly like the original.
’66 - ’77
................................ C6TZ-9721458A..........ea........... 19.95
C8AZ-6222601B
C8AZ-6222600B
Inside Door Handles
Glass Setting Tape
Goes down inside the window lift channel and holds the glass in place.
It is black on the side that faces the glass, white on the side that faces
the metal.
4' roll
’66
’67
’68 - ’77
................................ B7C-8122600B............ea........... 19.95
................................ E1HZ-8022600A..........ea........... 17.95
LH............................ C8AZ-6222601B..........ea........... 24.95
RH........................... C8AZ-6222600B..........ea........... 24.95
................................ 8A-7021478.................ea............. 9.95
Door / Window Handle Screw Kit
4-piece kit. Does all four inside handles. Phillips head.
’66 - ’77
................................ AK466..........................kit.............. 1.25
Door / Window Handle Back-up Plate
Door Window Glass Lower Bumpers
’66 - ’77
................................ C6TZ-9721762A..........pr.............. 2.95
Plastic washer that fits between handle and door
panel. White.
’67 Front with screw-on handle.
.......................C5AZ-6223370A..........ea............. 1.00
ORDER TOLL FREE 1 - 800 - 228 - 7346
23
Back
Front
Back
C2OZ6222008B
C5ZZ-6521819C
C5ZZ-6521818C
Door Handle Shaft Assemblies
’67
LH............................ C5ZZ-6521819C..........ea........... 14.95
RH........................... C5ZZ-6521818C..........ea........... 14.95
C5AZ6222008A
Striker Plates (B)
Includes striker plate, shim, screws.
’66 - ’67
’68 - ’77
................................ C2OZ-6222008B..........ea........... 14.95
................................ C5AZ-6222008A..........ea........... 14.95
AK560
AK562
Striker Plate Screws (C)
C5DZ-6221850
C8AZ-6221850
Door Lock Knobs
D5TZ-1021850A
75407
’66 - ’77
Zinc (standard)........ AK560..........................kit.............. 3.00
Stainless steel......... AK562..........................kit.............. 3.00
Chrome.
’66 - ’67
’68 - ’77
’73 - ’77
................................ C5DZ-6221850............pr.............. 4.95
................................ C8AZ-6221850............pr.............. 4.95
Black. Octagonal head. 11⁄2" long.
Genuine Ford.
............................... D5TZ-1021850A..........ea............. 5.95
Replacement. Includes black grommets.
............................... 75407...........................pr.............. 3.95
6522008R
6722008R
Door Latch-area Repair Plates
Used to repair fatigue stress cracks around door latches.
’66 - ’67
’68 - ’77
................................ 6522008R....................pr............ 29.95
................................ 6722008R....................pr............ 29.95
(D)
(C)
(B)
C3AZ-6221952BR
C3OZ6221813F
C3OZ6221812F
(A)
Door Latch Rod Retainers (D)
’66 - ’75
Typical Door Latch Assembly
C3AZ-6221952A
Requires up to 12 per vehicle.
Concours quality reproduction with correct metal clip.
............................... C3AZ-6221952BR.......ea............. 6.95
Replacement........... C3AZ-6221952A..........ea............. 2.95
Door Latches (A)
’66 - ’67
LH............................ C3OZ-6221813F..........ea........... 64.95
RH........................... C3OZ-6221812F..........ea........... 64.95
BA3685A
BA3685ANV
BA3685B
Key Blanks
D5TZ9721819B
D5TZ9721819B
Inner Door Latch Control Assemblies
Features a strong spring and zinc plating for durability.
’68 - ’77
LH............................ D5TZ-9721819B..........ea........... 19.95
RH........................... D5TZ-9721818B..........ea........... 19.95
Not sure of a term used here?
Check out the Glossary in the back of this catalog.
’66 - ’77
’66 - ’77
’66 - ’77
Ignition / door.......... BA-3685A....................ea............. 2.95
Ignition only. Anniversary key blank with the Ford crest has
a gold-toned finish, featuring red, white and blue detailing.
................................ BA-3685ANV...............ea............. 9.95
Tailgate / glove box.
................................ BA-3685B....................ea............. 2.95
“Super-fast shipping! Unbelievable!”
– Mark S.
INTERIOR
Front
INTERIOR WIRING / ELECTRICAL
24
SW351
LCK1
Jumbo HumpHuggers Continued
SW422
Ignition / Door Lock Cylinder-and-Key Sets
’66 - ’77
’66 - ’77
Ignition and doors. 3 locks, 2 keys.
................................ LCK1............................set........... 29.95
Ignition only.
Genuine Ford.......... SW351.........................ea........... 18.95
Reproduction........... SW422.........................ea........... 14.95
HumpHugger Hidden Floor and Storage Pouch Kit
This optional accessory equips your Bronco console with a hidden compartment and an ammo storage pouch underneath and out of view. If you want
to keep your personal items or ammo in your Bronco but out of sight, then
this kit is for you. The ammo pouch fits snugly underneath the false floor
which keeps everything out of sight from anyone if they open the storage
compartment. The false floor is black, and the pouch is camouflage.
’66 - ’77
................................ HH6677SKIT................ea........... 49.95
Interior Wiring / Electrical
Power Door Lock Kit with Alarm
Converts your 2-door manual lock system to a power lock system. Includes
actuators, all wiring, mounting hardware, remotes, alarm, detailed wiring
diagram, and instructions for installation and how to program the long-range
remote.
................................ CA2000........................kit.......... 249.95
C8AZ6229024
C8AZ6229232A
AK352
Coat Hook Cover, Retainer and Screws
Cover
’73 - ’77
................................ C8AZ-6229024............ea............. 5.95
Retainer
Reproduction. Requires Coat Hook Cover #C8AZ-6229024.
’73 - ’77
................................ C8AZ-6229232A..........ea............. 4.95
Screws
Set of 2.
’73 - ’77
................................ AK352..........................pr................ .65
NOTE: Electrical parts are non-returnable once installed.
We will replace defective units only.
Tachometer Wiring Harness
’72
................................ C9OZ-17A299A...........ea........... 34.95
Wiring Harness Kit
Kit includes wiring harness
(the engine and rear sections
of the harness contains special waterproof connectors
which seal each wire against
oil, gasoline and other liquids;
rear section is completely
finished with built-in ground
system); special extra-sealed
Ford electric terminals; fuse panel upgraded to 11 fuses, instead of the original five (fits in the glove box); a new Ford headlamp switch; dimmer switch;
heavy duty ignition switch; and a wiper switch.
Extra long wires are provided to allow modified electrical equipment,
such as automatic transmission, with a floor-mounted shifter containing
neutral safety and back-up lamp switches.
HHBR6677-01
HHBR6677-01CAMO
Jumbo HumpHuggers
Features dual drink holders made for “Big Gulp” drinks. Fits between the seats
with a bracket that allows you to secure it to the seat belt bolts if you wish.
For off-road use, extra-sealed connectors are provided to wire front turn
signal park and side-marked lamps. The rear harness plugs into a sealed
connector located in the engine compartment and wires the tail / side, backup and stop lamps. The rear harness also includes the fuel sender wire.
Also includes illustrated installation manual to make the wiring easy.
One-year warranty.
NOTE: Hazard and brake switch must be reused.
’66 - ’77
................................ BR10............................kit.......... 449.95
For an optional hide-away floor and storage pouch kit, see part
#HH6677SKIT in the next column.
’66 - ’77
All black................... HHBR6677-01.............ea......... 159.95
Black with camouflage top and armrest.
................................ HHBR6677-01CAMO...ea......... 159.95
All parchment.......... HHBR6677-06.............ea......... 159.95
Parchment with camouflage top and armrest.
................................ HHBR6677-06CAMO...ea......... 159.95
Ignition Switch Adapter Kit
Made to fit with Wire Harness Kit #BR10. Allows you to use the factory
ignition switch.
’66 - ’77
................................ BRS1...........................kit............ 29.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
25
SW24
Ignition Switch and Bezel
Switch
’66 - ’77
................................ SW583.........................ea........... 19.95
Bezel
SW881
Brake Lamp (Stop Lamp) Switches
’66
’67 - ’77
................................ SW24...........................ea........... 12.95
Reproduction........... SW881.........................ea........... 15.95
Works with factory switch or with Wiring Harness Kit #BR10 if Ignition
Switch Adapter Kit #BRS1 is used.
’66 - ’77
................................ C3TZ-11584A..............ea........... 24.95
Back-Up Lamp Switch
DS188
D3ZZ-11654A
’67 - ’77
Headlamp Switches
’66 - ’76
’66 - ’77
NOTE: In order to facilitate installation, it may be necessary to ream
the switch mounting hole in the existing back-up lamp switch mounting
bracket to accommodate the switch diameter.
3-speed M/T............ SW938.........................ea........... 24.95
To serial #C25,000.
............................... D3ZZ-11654A..............ea........... 29.95
................................ DS188..........................ea........... 39.95
** For Headlamp Switch Knob and Bezel, see page 14. **
Headlamp Dimmer Switch
’66 - ’77 Floor mount.
........................... SW263.........................ea............. 6.95
Instrument Cluster Voltage Regulator
’66 - ’77........................................ GR508.........................ea........... 26.95
Windshield Washer / Wiper Switch
’68 - ’77
With 2-speed electric wipers.
................................ SW869.........................ea........... 31.95
** For Wiper Switch Knob and Bezel, see page 15. **
Heater Blower Switch and Cable
’66 - ’77
................................ C7TZ-18578A..............ea........... 44.95
** For Heater Knob and Bezel, see page 14. **
Wire Loom Strap
C5OZ-13341B
SM47FM
D3TZ-13341B
Turn Signal Switches
315⁄16" × 3⁄8".
’68
................................ 68-562..........................ea............... .95
Includes cam. Made in the USA.
’66 - ’73
’74 - ’77
NOTE: Wire colors are different from stock ’71 - ’73 wires,
but part will fit ’71 - ’73.
................................ C5OZ-13341B..............ea........... 54.95
Includes hazard switch.
M/T without tilt wheel.
................................ SM47FM......................ea........... 49.95
A/T........................... D3TZ-13341B..............ea........... 49.95
** For Turn Signal Lever and Knob, see page 19. **
Wiring Terminal Kit
An assortment of the 18 most popular solderless insulated terminals and
connectors. Comes in a plastic display box with dividers.
175 pieces ................................ TK175..........................kit............ 10.95
Vinyl Electrical Tape
Flame-retardant, cold- and weather-resistant. Suitable for use at no more
than 600 V and not over 176º F. Premium quality. Made in the USA.
Turn Signal Cam Repair Kit
’66 - ’77
................................ 652232.........................kit............ 10.95
3⁄4"
× 52' roll................................ 3M6133........................ea............. 3.95
INTERIOR WIRING / ELECTRICAL
C3TZ11584A
SW583
EXTERIOR
26
C6TZ-8200F
5⁄16"
Grilles
Made of quality steel. Features rectangular mounting brackets attached
behind both parking lamp holes. Primer finish.
’66 - ’68
’69 - ’77
av9756
av3616
Hood Hinge Bolt and J-nut
................................ C6TZ-8200G................ea......... 450.00
................................ C6TZ-8200F................ea......... 485.00
** For Grille Letters, see page 32. **
** For Grille Decals, see pages 33 and 83. **
– 18.
’66 - ’77
Bolt. Black with disc washer. 1" long.
................................ AV9756........................ea............... .40
J-Nut........................ AV3616........................ea............... .75
Hood Hinge, Latch, and Catch
Hardware Kits
’66 - ’77
Button head............. TS6-6508.....................kit.............. 8.95
Hex head................. TS6-6509.....................kit.............. 5.95
Indented hex head.. TS6-6510.....................kit.............. 8.95
(B)
’66 - ’72
Hood
Bumpers
(A)
C6TZ-16892S
C6TZ-16929SK
Hood Pin and Spring Assembly
Stainless steel.
’66 - ’77
................................ C6TZ-16929SK............ea........... 29.95
Hood Auxiliary Catch Hook
Stainless steel.
’66 - ’77
................................ C6TZ-16892S..............ea........... 24.95
C1VY-16763A
Stud type. Requires 1 pair per vehicle.
................................ C1VY-16763A..............pr.............. 9.95
................................ C5ZZ-16763B..............pr.............. 5.95
Hood Side Bumpers (B)
Stainless steel. Includes hardware.
’66 - ’77
C6TZ-16758A
Fender Apron-to-Hood Bumpers (A)
’66 - ’72
’73 - ’77
Hood Prop Rods
C5ZZ-16763B
Hood Bumpers
................................ C6TZ-16826S..............ea........... 29.95
’66 - ’77
Requires 1 pair per vehicle.
................................ C6TZ-16758A..............pr.............. 2.95
Headlamp-related Parts
Polished Stainless Steel
Universal fit. Has a polished finish and is made from quality 304 stainless
steel. Includes stainless washers and spring and has a tip cover to protect
the hood. Overall length is 35", but may be cut to desired length.
............................... C5ZZ-16826S..............ea........... 39.95
C7TZ-13064B
D1BZ-13064B
Headlamp Doors
Chrome.
’66 - ’70
Hood Pin Kit
Assembly
’71 - ’77
LH and RH.
............................... C7TZ-13064B..............pr............ 79.95
LH and RH.
............................... D1BZ-13064B..............pr............ 79.95
MRG1218-3
Hood Pin Kit
Deluxe aftermarket.
’66 - ’77
................................ MRG1218-3.................kit............ 32.95
H6014
Etching on
Headlamp Bulb
11A-13015A
Headlamp Bulb
Round with FoMoCo script.
’66 - ’77
Hood Hinges
’66 - ’77
................................ C6TZ-16796.................pr............ 18.95
** For Hoods, see page 33. **
................................ H6014..........................ea........... 14.95
Headlamp Bulb Retaining Ring
Chrome.
’66 - ’77
................................ 11A-13015A.................ea............. 9.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
27
37-111
11-6
C2TZ-13181A
Windshield Wiper Blades Continued
C7TZ-13032B
’66 - ’77
’70 - ’77
C2OZ-13031A
C1DZ-13118A
Winter blade............ 37-111..........................ea........... 11.95
With wrist action wiper arms.
Exact fit OE-style; no adapters needed.
............................... 11-6..............................ea........... 10.95
Headlamp Mount and Adjusting Ring
Made exactly like the original. Black painted finish.
’66 - ’77
LH or RH................. C1DZ-13118A..............ea........... 19.95
Windshield Wiper Arm (B)
Headlamp Adjustment Hardware
Replacement; not like original.
’66
’68 - ’77
’69 - ’77
’66 - ’77
Nut........................... C2TZ-13181A..............ea............. 2.00
Screw and nut assembly. Requires 4 per vehicle.
................................ C7TZ-13032B..............kit.............. 2.95
Spring...................... C2OZ-13031A..............ea............. 2.00
................................ 51-062..........................ea........... 19.95
356094S
C9TZ-17541
Windshield Wiper Arm Pivot Shaft Nut (C)
Chrome.
’69 - ’77
Headlamp Splash Shields
’66 - ’77
................................ C6TZ-13B159..............pr.............. 4.95
................................ 356094S......................ea............. 5.95
Windshield Wiper Arm Pivot-toWindshield Frame Gaskets (D)
’69 - ’77
................................ C9TZ-17541.................pr.............. 2.95
C6TZ18818S
Windshield Washer Spray Nozzle
’66 - ’77
................................ B5S-17666A................ea........... 13.95
C6TZ18813PAD
C6TZ-18813A
Antenna
This excellent reproduction is the complete assembly including gasket,
cable, mast and screws.
’66 - ’77
With cowl-mounted antenna.
................................ C6TZ-18813A..............ea........... 99.95
C6TZ9603850KIT
Windshield Fold-down Latch kit
’66 - ’77
Antenna Mounting Kit
................................ C6TZ-9603850KIT.......kit............ 74.95
Kit includes antenna base, gasket, and nut.
’66 - ’77
................................ C6TZ-18818S..............kit............ 24.95
Antenna Mount Pad
Injection-molded rubber with a beaded edge.
’66 - ’77
................................ C6TZ-18813PAD.........ea............. 5.95
C3RZ-17696US
C3RZ-17696
(B)
(C)
Typical Windshield
Wiper Assembly
(D)
Windshield Wiper Blades (A)
Outside Mirrors
(A)
Includes gasket.
’66
®
’66 - ’77
C7TZ-17696M
C7TZ-17696S
Premium replacement.
................................ 33-122..........................ea........... 12.95
’66 - ’77
- ’77
’66
LH or RH.
Made in the USA..... C3RZ-17696US...........ea........... 49.95
Import..................... C3RZ-17696................ea........... 26.95
LH or RH.
Rectangular head. Includes attaching hardware.
................................ C7TZ-17696M..............ea........... 59.95
LH or RH.
Rectangular head. Includes gasket and mounting screws.
............................... C7TZ-17696S..............ea........... 49.95
EXTERIOR
Headlamp-related Parts continued
EXTERIOR
28
AK389
AK390
Outside Mirror Mounting Screws and Nuts
’66 - ’77
Screws.................... AK389..........................kit.............. 1.50
Nuts......................... AK390..........................kit.............. 1.50
Door Hinge and Check Strap Kit
Kit includes 4 stainless, removable-style door hinges, 2 quick release
door check brackets, 2 nylon door straps with stainless anchor brackets
and hardware.
Outside Mirror Mounting Kit
Repairs oversized holes on standard mirrors. 4-piece kit includes 2
screws and 2 bushings.
’66 - ’77
................................ C6TZ-9722800SK........kit.......... 289.95
Standard mirror....... C3RZ-17696MK...........kit.............. 2.95
’66
Outside Door Handles and Pads
Button Head
Hex Head
Indented Hex Head
Door Hinge Hardware Kits
Each kit does both doors.
’66 - ’77
6522404US
6522404
Handles
Button head............. TS6-6518.....................kit............ 15.95
Hex head................. TS6-6519.....................kit............ 11.95
Indented hex........... TS6-6520.....................kit............ 17.95
Reflectors
Includes buttons, pads, and hardware.
’66 - ’77
Made in the USA. Quality plating.
................................ 6522404US..................pr............ 69.95
Import...................... 6522404.......................pr............ 29.95
Grille
Amber reflector in an aluminum bezel.
’67 - ’69
Pads
Set of 4; does both handles.
’66 - ’77
................................ C7TZ-13380D..............ea........... 24.95
................................ 64HP............................set............. 4.95
C8TZ-13380D
C8TZ-13380C
Front Fender
Door / Ignition Lock Cylinder-and-Key Set
Amber reflector in an aluminum bezel.
3 locks, 2 keys and 2 retainers.
’67
’68 - ’69
’66 - ’77
................................ LCK1............................set........... 29.95
C6TZ-9722801A
................................ C7TZ-13380D..............ea........... 24.95
LH............................ C8TZ-13380D..............ea........... 29.95
RH........................... C8TZ-13380C..............ea........... 29.95
C7TZ-13380CNOS
C7TZ-13380C
C6TZ-9722800A
Door Hinges
’66 - ’77
Upper or lower.
LH.
............................... C6TZ-9722801A..........ea........... 59.95
RH.
............................... C6TZ-9722800A..........ea........... 59.95
C8TZ-13380B
C8TZ-13380C
Body Side
“Fast, easy, and helpful. Very easy for [a] first-time customer
to order.”
– Larry M.
Red reflector in an aluminum bezel.
’67 - ’69
’68 - ’69
Red, 3" × 4". Requires 2 per vehicle.
Genuine Ford.......... C7TZ-13380CNOS......ea........... 34.95
Reproduction........... C7TZ-13380C..............ea........... 24.95
LH............................ C8TZ-13380B..............ea........... 29.95
RH........................... C8TZ-13380A..............ea........... 29.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
29
Parking Lamp Related Continued
D0TZ-13380B
D0TZ-13380A
Rear Body
Located below taillight; also used with spare tire carrier. Red reflector
with chrome-plated bezel.
’70 - ’77
EXTERIOR
Reflectors Continued
Parking Lamp Socket and Wire Assembly
Replacement.
’74 - ’77
. ............................. D1FZ-13234A..............ea............. 9.95
With Sport package.
LH............................ D0TZ-13380B..............ea........... 34.95
RH........................... D0TZ-13380A..............ea........... 34.95
Body-to-Grille Pad
d5tz-15a201a
Gasket
d5tz-15a201B
Side Marker Lamps
Lens
’66 - ’68 Parking
Lamp Assembly
LH or RH. Does not include bezel, bulb, or wiring.
’70 - ’77
Front fender. Amber.
................................ D5TZ-15A201A............ea........... 14.95
Rear body. Red....... D5TZ-15A201B............ea........... 14.95
Parking Lamp Related
c3az-13208b
C4OZ-13208A
D1Uz-13208a
Lenses
’66 - ’68
’69 - ’77
Clear........................ C3AZ-13208B..............ea............. 6.95
Amber...................... C4OZ-13208A..............ea............. 6.95
Amber...................... D1UZ-13208A..............ea............. 8.95
c1ab-13211a
Side Marker Lamp Bezel and Plate
Used with above marker lights. Includes adhesive-backed gaskets.
’70 - ’77
Front or rear............ D0UZ-15A460A...........ea........... 24.95
B9C-13211b
Lens-to-Lamp Body Gaskets
’66 - ’68
’69 - ’77
................................ C1AB-13211A..............pr.............. 3.95
................................ B9C-13211B................pr.............. 5.95
Marker Lamp Socket
Replacement. Comes with 10" wires for splicing.
C6TZ-13201A
D2BZ-13200A
’70 - ’77
Front or rear........... D0DZ-15A434B...........ea............. 3.95
Taillight Related
Parking Lamp Assemblies
Includes lens, bulb, wiring and housing. LH or RH.
’66 - ’68
’69 - ’77
Clear lens................ C6TZ-13201A..............ea........... 39.95
Amber lens. Made exactly like original.
................................ D2BZ-13200A..............ea........... 39.95
C4TZ-13461A
Lens-to-Housing Gaskets
Parking Lamp Body-To-Grille Pads
’69 - ’77
................................ C9TZ-13217A..............pr............ 24.95
’66
’67 - ’77
C7TZ-13461A
................................ C4TZ-13461A..............pr.............. 7.95
................................ C7TZ-13461A..............pr.............. 7.95
EXTERIOR
30
Taillight Related Continued
License Plate Mounting Bracket
Polished stainless-steel.
’66 - ’77
C4TZ-13450D
C4TZ-13451D
Lenses
’66
’67 - ’77
c7tz-13450E
2214
c7tz-13450F
2215
Reproduction made in the USA. Features Ford logo.
LH............................ C4TZ-13451D..............ea........... 19.95
RH........................... C4TZ-13450D..............ea........... 19.95
Reproduction made in the USA. Features Ford logo.
LH............................ C7TZ-13450F..............ea........... 24.95
RH........................... C7TZ-13450E..............ea........... 24.95
Replacement. Does not have Ford logo.
LH............................ 2215.............................ea........... 14.95
RH........................... 2214.............................ea........... 14.95
C4TZ-13489F
C4TZ-13489E
Taillight Doors
’66 - ’77
’66 - ’77
................................ C6TZ-13585S..............ea........... 49.95
Chrome.
LH............................ C4TZ-13489F..............ea........... 39.95
RH........................... C4TZ-13489E..............ea........... 39.95
Highly polished stainless steel.
LH and RH.............. C4TZ-13489PR............pr............ 64.95
Exterior Gasket and Pad Kit
24 piece kit includes:
• 2 lock cylinder gaskets
• 2 wiper pivot-to-windshield gaskets
• 1 license plate lamp lens gasket
• liftgate door handle pads
• door handle pads
• 2 parking lamp lens housing gaskets
• 2 taillight lens housing gaskets
• 2 parking lamp gaskets
• 1 tailgate handle gasket
• 10 side marker lamp gaskets (inner and outer).
’66 - ’77
................................ BR109..........................kit............ 23.95
Exterior Lamp
Hardware Kit
Stainless steel is superior to chrome plating
because it won’t crack or peel, as it isn’t a
surface coating but the very substance from
which the fastener is made. Totally Stainless,
Inc. offers a unique line of Grade 8-strength stainless steel hardware
for high-strength applications (as opposed to regular-strength stainless
steel fasteners, which are only slightly stronger than Grade 2).
Kit does headlamps, turn signals (front and back), and side markers.
Taillight Lamp Socket and Wire Assembly
Replacement.
’66 - ’77
’74 - ’77
Phillips head............ TS6-6504.....................kit.............. 3.95
Moulding
. ............................. D1FZ-13234A..............ea............. 9.95
Taillight Wiring Grommet
’66 - ’77
................................ 378996S......................ea............. 1.95
Grille Opening Moulding Set
4 pieces. Made in the USA.
’67 - ’77
Typical License Plate
Lamp Assembly
C1TB-13564A
License Plate Lamp Lens
Reproduction.
’66 - ’77
................................ C1TB-13564A..............ea........... 12.95
................................ C7TZ-8242SET............set......... 159.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
31
(B)
EXTERIOR
(A)
(A)
(A)
C7TZ-16003B
(B)
Front Fender Moulding
11⁄4" wide, includes fasteners.
’66 - ’77
LH............................ C7TZ-16004B..............ea........... 74.95
RH........................... C7TZ-16003B..............ea........... 74.95
Moulding Retainers / Clips
Grille
’66 - ’77
’66 - ’72 with Sport package; ’73 - ’77 with Sport or Ranger
package.
Ends and center. Requires 14 per vehicle.
(A)........................... C7ZZ-63291B80A........ea............. 3.95
Upper and lower. Requires 8 per vehicle.
(B)............................ C7TZ-8244A................ea............. 3.95
(C)
(D)
C7TZ-9720938A
Door Moulding
’66 - ’77
LH or RH................. C7TZ-9720938A..........ea........... 62.95
Front
Front Fender
’66 - ’77
Front of fender. Requires 2 per fender.
(C)........................... C5AZ-6340248A..........ea............. 2.95
Rear of fender. Requires 4 per fender.
(D)........................... C7TZ-9729318A..........ea............. 2.00
(D)
C7TZ-9729038A
(E)
Upper Rear Quarter Moulding
’66 - ’77
’68 - ’77
LH, with or without swing-away tire carrier.
................................ C7TZ-9729039A..........ea........... 74.95
RH, without swing-away tire carrier.
................................ C7TZ-9729038A..........ea........... 74.95
RH, with swing-away tire carrier.
................................ C8TZ-9729076A..........ea........... 49.95
Front
Door
’67 - ’77
Front of door. Requires 4 per door.
(D)........................... C7TZ-9729318A..........ea............. 2.00
Rear of door. Requires 1 per door.
(E)............................ C7TZ-9720880A..........ea............. 1.95
(C)
(C)
(D)
Without Spare
Tire Carrier
C7TZ-9741018A
Front
(C)
Upper Tailgate Moulding
Goes above the handle. 11⁄4" wide, includes fasteners.
’66 - ’77
(C)
................................ C7TZ-9741018A..........ea........... 49.95
Front
Upper Side Moulding Sets
Includes mouldings for both front fenders, both doors, both rear quarter
panels and tailgate. 11⁄4" wide, includes fasteners.
’66 - ’77
’68 - ’77
(D)
Without swing-away tire carrier.
................................ C6TZ-9721048B..........set......... 399.95
With swing-away tire carrier.
................................ C6TZ-9721048A..........set......... 424.95
With Spare Tire Carrier
Quarter Panel
’66 - ’77
Front and rear. Requires 2 per side.
(C)........................... C5AZ-6340248A..........ea............. 2.95
Center. Requires 5 per side.
(D)........................... C7TZ-9729318A..........ea............. 2.00
EXTERIOR
32
(E)
(D)
(E)
Non-stock Fender Emblems
Plastic with industrial-grade plating and double-sided tape for easy
installation.
kpp5093
kpp5092
Rectangles
Chrome numerals on black background with chrome border. 31⁄8" long ×
3⁄4" tall.
“289”
“302”
................................... KPP5092......................ea........... 14.95
................................ KPP5093......................ea........... 14.95
Moulding Retainers / Clips Continued
Tailgate
’66 - ’77
Ends. Requires 2 per tailgate.
(E)............................ C7TZ-9720880A..........ea............. 1.95
Center. Requires 7 per tailgate.
(D)........................... C7TZ-9729318A..........ea............. 2.00
Side Moulding Clip Kit
Kit includes 28 #C7TZ-9729318A clips, 12 #C5AZ-6340248A clips, and 6
#C7TZ-9720880A clips.
’66 - ’77
Open Numbers
Chrome numerals with black border and red inside the decimal. 41⁄8" long ×
11⁄8" tall.
“5.0”
302.......................... 2155151.......................ea............. 7.95
................................ C7TZ-9621048CLIP.....kit............ 99.95
** Universal moulding clips can be found on page 79. **
4OVAL
Ford Oval Emblems
5OVAL
4" wide.
Genuine Ford plastic oval emblem from new car production. Selfadhesive back............................. 4OVAL..........................ea............. 9.95
Moulding Release Tool
Removes trim mouldings around cemented windshields and rear
windows easily and quickly. One-piece metal construction.
................................. 15K128........................ea............. 6.95
Silvertone
Metal silvertone emblem with embossed Ford script. Self-adhesive back.
............................... 5OVAL..........................ea............. 4.95
Emblems
378362S
Grille Letter Set
F-O-R-D. Deep red plastic finish inside the letters just like the originals.
Includes attaching hardware. Set of 4.
’67 - ’77
With Sport package.. C7TZ-8316-20.............set........... 74.95
c3oz-16228b
AV11293
AV8405
Tube Nuts (Barrel Clips)
c8oz-16228b
Used to attach emblems which fasten to the body using pins. Some nonadhesive emblems already include these, but you can also purchase
them separately.
Small
Medium
Large
For 1⁄16" stud, 1⁄8" panel hole.
................................ 378362S......................ea............... .50
................................ AV11293......................ea............... .50
................................ AV8405........................ea............. 1.00
Front Fender Emblems
Requires 1 per fender. Includes attaching hardware.
’66 - ’68
’69 - ’71
“289”........................ C3OZ-16228B..............ea............. 9.95
“302.” Red background with “302” painted in the center with
white........................ C8OZ-16228B..............ea........... 19.95
c6tz-16098a
3M Clear Plastic and Emblem Adhesive
Excellent adhesive for plastic repair and emblem application. May be
used for interior or exterior bonding on metal emblems, rigid plastic parts,
taillight lenses and vinyl trim strips. Strong and quick drying. Requires
only a one-surface application.
5 oz. tube ................................ 08061...........................ea............. 7.95
Can’t decide on a gift idea?
c7tz-16098a
’66 - ’77
’67 - ’77
“Bronco”.................. C6TZ-16098A..............ea........... 29.95
“Bronco Sport”......... C7TZ-16098A..............ea........... 49.95
How about an Auto Krafters Gift Certificate?
They are available in your choice of dollar amount.
Check online or ask your sales associate today.
ORDER TOLL FREE 1 - 800 - 228 - 7346
33
D667729“FORD” Decals
Available in Black (01), Blue (02), Red (03), White (05) and Silver (08).
Please specify color choice by adding color code to the end of the part
number when ordering.
Tubular Front Bumper by Smittybilt
Black bumper made of 3" × .109" steel tubing. Has 2 light tabs, includes
attaching hardware. 70" × 24" × 9", 56 lbs.
’66 - ’77
................................ KYEB50-F....................kit.......... 399.95
Sheet Metal
Grille
Letters are 1" high.
................................ D667728- ..................ea........... 14.95
’66 - ’77
Tailgate
Letters are 41⁄2" high.
................................ D667729- ..................ea........... 19.95
’66 - ’77
** Other decals can be found on page 83. **
NOTE: Due to UPS size restrictions, some items must be shipped via
commercial truck lines with the shipping prepaid to Auto Krafters by the
customer. Please call before ordering for shipping charges. Minimum
truck shipment charges start at $60.00. Please provide a business
delivery address when ordering. A $10.00 boxing fee will be added per
order for all sheet metal.
c6tz-17757B
Typical
Hood
c6tz-17757g
Bumpers
Front or rear.
’66 - ’77
Black....................... C6TZ-17757B..............ea........... 79.95
Chrome................... C6TZ-17757G..............ea......... 169.95
Hoods
NOTE: These items are shipped truck freight.
’66 - ’69
’69 - ’77
Through early ’69.... 66F16730.....................ea......... 449.95
From late ’69........... 69F16730.....................ea......... 449.95
** For other hood-related parts, see page 26. **
AK1003
Bumper Bolts
’66 - ’77
’68 - ’69
C5ZZ-17A924
7⁄16"
– 14 × 11⁄4". Includes nut.
............................... AK1009........................ea............. 2.50
7⁄16" – 14 × 11⁄2". Includes nut.
................................ AK1003........................ea............. 2.50
(A)
(C)
(K)
(I)
(E) (H)
(C) (D)
(B)
(J)
(A)
Bumper Bolt Wave Washer
’66 - ’77
................................ C5ZZ-17A924..............ea............. 1.00
(B)
Bumper Bolt Kit
16000BL
Kit contains 4 stainless steel bumper bolts, 4 nuts and 4 wave washers.
’66 - ’77
Front........................ FO178..........................kit............ 11.95
16000BR
Front Fenders (A)
Made from new tooling. Exceptional quality. Comes in EDP black finish.
NOTE: These items are shipped truck freight.
’66 - ’77
Front or Rear Bumper
Hardware Kit
LH............................ 16000BL......................ea......... 199.95
RH........................... 16000BR......................ea......... 199.95
Carriage bolts have a mirror finish.
’66 - ’77
Requires 2 kits for front and rear.
................................ TS6-6503.....................kit............ 16.95
C6TZ-16055
C6TZ-16054
Fender Aprons (B)
Bumper Guards
Chrome-plated stamped steel.
19 gauge.
’66 - ’77 Front or rear.
..........................C6TZ-17996PR............pr............ 74.95
’66 - ’67
LH............................ C6TZ-16055.................ea........... 89.95
RH........................... C6TZ-16054.................ea........... 89.95
EXTERIOR / SHEET METAL
d667728-
SHEET METAL
34
c6tz9602039
c6tz9602038
C8TZ9628161
Cowl Side Panels (C) See Diagram on Previous Page
Goes behind hinge support. 19 gauge, heavier than original. Zinc coated.
C8TZ9628160
NOTE: These parts are important structural parts and should be installed
when the new door hinge is installed.
’66 - ’77
LH............................ C6TZ-9602039.............ea........... 74.95
RH........................... C6TZ-9602038.............ea........... 74.95
Quarter Pillar Latch Posts (H)
See Diagram on Previous Page
Located between the door and the rear quarter panel. 19 gauge.
LH............................ C8TZ-9628161.............ea........... 69.95
RH........................... C8TZ-9628160.............ea........... 69.95
’68 - ’77
C8TZ9602501A
C8TZ9602500A
Door Hinge Posts (D) See Diagram on Previous Page
Complete assembly includes hinge mounts and inner and outer panels.
19 gauge, heavier and stronger than original.
’66 - ’77
LH............................ C8TZ-9602501A..........ea......... 179.95
RH........................... C8TZ-9602500A..........ea......... 179.95
Lower Door Skin (E) See Diagram on Previous Page
10" from top to bottom.
’66 - ’77
LH or RH................. 559-12..........................ea........... 59.95
(F)
559-50L
559-50R
Rear Quarter Skins (I)
See Diagram on Previous Page
Aftermarket repair panel, not like the original Ford panel. You must cut
out your old quarter panel and weld this piece in. This piece is 23" high
from the bottom up. It stops at the body line. 19 gauge.
NOTE: ’76 - ’77 models have a fuel filler door that the early models do
not have. The early model fuel filler hole is not in the same place. The
fuel filler door will need to be cut out and relocated. This piece does NOT
have a gas door and is NOT a full panel; it is a skin only.
LH............................ 559-50L........................ea......... 149.95
RH........................... 559-50R.......................ea......... 149.95
’66 - ’77
Wheelhouses
(G)
c6tz-9602047a
c6tz-9602046
(F)
c6tz-9611143
Rocker Panels
c6tz-9611142
Front (J) See Diagram on Previous Page
Inner Panels (F)
19 gauge.
19 gauge.
’66 - ’77
c6tz-9602047b
LH............................ C6TZ-9611143.............ea........... 44.95
RH........................... C6TZ-9611142.............ea........... 44.95
10128
’66 - ’72
’66 - ’77
’73 - ’77
Without P/S or P/B.
NOTE: If vehicle has been retrofitted with P/S or P/B, use
part #C6TZ-9602047B.
LH............................ C6TZ-9602047A..........ea........... 99.95
RH........................... C6TZ-9602046.............ea........... 99.95
LH............................ C6TZ-9602047B..........ea........... 99.95
C6TZ9610128B
Full Panels (G)
’66 - ’77
’66 - ’77
19 gauge. LH or RH.
Looks as good as the Genuine Ford panel, but does not
turn up on the ends.
................................ 10128...........................ea........... 84.95
From serial #886,001. LH or RH.
................................ C6TZ-9610128B..........ea......... 109.95
Rear (K) See Diagram on Previous Page
Made from 2 pieces welded together. 19 gauge.
’66 - ’77
LH or RH................. 559-29..........................ea......... 134.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
35
(N)
574-69L
(O)
574-69R
Tailgate Posts
(M)
19 gauge.
’66 - ’77
LH............................ 574-69L........................ea........... 37.95
RH........................... 574-69R.......................ea........... 37.95
(E)
c6tz-9611135l
Front Floor (L)
(D)
c6tz-9611135RE
(C)
19 gauge.
NOTE: Due to size, additional shipping charges apply.
’66 - ’77
Includes toe board or firewall extension. Does not include
transmission hump.
LH............................ C6TZ-9611135L...........ea........... 64.95
RH. Extended; reaches back to the “step-up” in the floor.
48" long................... C6TZ-9611135RE........ea........... 69.95
(A)
(B)
Seam Sealer
Premium-quality, fast-setting seam sealer with superior adhesion for
interior and exterior applications. It’s an excellent sealer for quarter panel
seams, trunk seams, wheelhouse seams, floor seams, cowl seams and
door skins. Use with a caulking gun.
12 oz. cartridge............................ AV1002........................ea........... 10.95
Tailgate (A)
Exact reproduction made in the USA of galvanized steel.
NOTE: Must be primed with zinc chromate primer before painting.
c6tz-9611160a
c6tz-9611160B
’66 - ’77
................................ C6TZ-9640700A..........ea......... 419.95
Front Floor Reinforcement Panels (N)
’66 - ’77
LH............................ C6TZ-9611160A..........ea........... 28.95
RH........................... C6TZ-9611160B..........ea........... 28.95
C4TZ-9944400A
Tailgate Supports (B)
’66 - ’77
Cargo Area Floor (O)
Includes seat brackets and nuts.
................................ C4TZ-9944400A..........ea........... 39.95
Tailgate Hinge (C)
401⁄4"
×
511⁄2".
35 lbs.
’66 - ’77
’66 - ’77
Requires 2 per vehicle. LH or RH.
................................ C4TZ-9943000A..........ea........... 26.95
................................ 559-46..........................ea......... 199.95
c6tz-16993a
559-70L
559-70R
Taillight Panels
19 gauge.
’66 - ’77
C4TZ9943000A
LH............................ 559-70L........................ea........... 59.95
RH........................... 559-70R.......................ea........... 59.95
c8tz-16993b
c4tz-9944482a
Tailgate Bumpers
’66 - ’68
’69 - ’77
’66 - ’77
Upper. Requires 1 pair per vehicle.
............................... C6TZ-16993A..............pr ............. 2.25
Upper and lower. Set of 4.
............................... C8TZ-16993B..............set............. 6.95
Lower support arm. Requires 2 per vehicle.
(D)........................... C4TZ-9944482A..........ea............. 5.95
SHEET METAL / EXTERIOR
(L)
EXTERIOR
36
Button Head
C4TZ99431D76A
c4tz99431b54a
Tailgate Latch (E) See Diagram on Previous Page
On body.
’66 - ’77
Indented Hex Head
Hex Head
Tailgate Hardware Kits
’66 - ’77
Button / flat socket... TS6-6543.....................kit............ 14.95
Hex / Phillips........... TS6-6544.....................kit............ 10.95
Indented hex / Phillips.
................................ TS6-6545.....................kit............ 13.95
................................ C4TZ-99431B54A........ea........... 20.95
Tailgate Latch Release Bracket Assembly
’66 - ’77
LH or RH................. C4TZ-99431D76A........ea........... 42.95
(DD)
c7tz-9843400
(EE)
c6tz-9122428a
Liftgate Handle with Lock and Keys
Replacement. Not exact. Chrome plated. Includes gasket and a pair of
keys (not Ford).
(BB)
’66 - ’77
(AA)
C7TZ-99431B82A
(CC)
Typical Tailgate Latch Handle Assembly
................................ C7TZ-9843400.............ea........... 39.95
Liftgate Door Handle Pad
’67 - ’77
From serial #A42,001.
................................ C6TZ-9122428A..........ea................ 95
Tailgate Latch Release Handles (AA)
’66 - ’77
Zinc plated............... C4TZ-99431B82A........ea........... 29.95
Chrome plated......... C7TZ-99431B82A........ea........... 32.95
Stainless steel......... C7TZ-99431B82SS.....ea........... 34.95
C3AZ-6221952BR
C3AZ-6221952A
Liftgate Latch Rod Retainers
’66 - ’75
C4TZ-99431C78SS
52363-S4
C4TZ-99431D72S
Tailgate Handle Mounting Plate (BB)
Polished stainless steel. Manufactured exactly like the original. Made in
the USA.
NOTE: These are the mounting plates only; handles are sold separately.
’66 - ’77
Requires up to 12 per vehicle.
Concours quality reproduction with correct metal clip.
............................... C3AZ-6221952BR.......ea............. 6.95
Replacement........... C3AZ-6221952A..........ea............. 2.95
Liftgate Hardware Kits
’66 - ’77
Button / flat socket head.
................................ TS6-6553.....................kit............ 10.95
................................ C4TZ-99431C78SS.....ea........... 38.95
Tailgate Latch Mounting Plate Screws (CC)
Stainless steel. Set of 4.
’66 - ’77
................................ 52363-S4.....................set............. 2.50
Tailgate Handle Pivot Bolt and Nut (DD)
’66 - ’77
................................ C4TZ-99431D72S........ea........... 15.95
’66 - ’68
C6TZ-9840452A
Tailgate Release Latch Rods (EE)
’66 - ’77
c9tz-9840481a
................................ C6TZ-98431A78PR.....pr............ 15.95
380478s
’69 - ’77
Liftgate Bumpers
’66 - ’68
’66 - ’77
’69 - ’77
Liftgate side and body side.
Set of 4. Includes 8 installation screws.
................................ C6TZ-9840452A..........set............. 9.95
Liftgate-to-liftgate prop. Requires 2.
................................ 380478S......................ea............. 1.50
Liftgate latch on tailgate.
Rubber.................... C9TZ-9840481A..........ea............... .95
ORDER TOLL FREE 1 - 800 - 228 - 7346
37
By Bushwacker
Bushwacker’s exclusive bold pocket design and style offers extreme
tire and wheel coverage, allowing
you to increase the wheel well
opening to accommodate large
2000207
tires and wheels. Gives maximum
durability and flexibility while
maintaining its shape in extreme
conditions. Matte black finish can be easily custom painted to match or
accent any vehicle. Rear pair offers an additional 5" of opening. Complete
with stainless steel hardware.
2000107
’66 - ’77
Front........................ 2000107.......................pr.......... 199.95
Rear........................ 2000207.......................pr.......... 199.95
4-4110G
C6TZ-5400S
Body (Cab) Mounts and Hardware
Mounts Only
Polyurethane. 16 piece set.
’66 - ’77
................................ 4-4101G.......................set........... 62.95
Mounts and Hardware
64 piece set.
’66 - ’77
................................ 4-4110G.......................set........... 99.95
Body Mount Pad Kit
Exterior Hardware
Rubber. 16 pieces: 8 upper and 8 lower. Includes instruction sheet.
’66 - ’77
................................ C6TZ-5400S................kit............ 49.95
Body Mount Hardware Kits
(A)
(B)
(C)
(D)
(E)
Front Body Mount Kit
’66 - ’77
Hex head................. TS6-6560.....................kit.............. 7.95
Cab Mount Kit
’66 - ’77
Hex head................. TS6-6546.....................kit............ 29.95
OEM-type Body Bolts
’66 - ’67
’67 - ’69
’69 - ’70
Phosphate. 5⁄16" – 18 × 15⁄16".
With “HTS” stamped on top. Includes star washer.
(A)........................... 378156-S2...................ea............. 1.25
With “SEMS” stamped on top. Includes 13⁄16" disc washer.
(B)........................... 359662-S2...................ea............. 1.25
Cadmium. 5⁄16" – 18 × 1". Includes 13⁄16" disc washer.
With “S” stamped on top.
(C)........................... 378178-S7...................ea............. 1.25
With “RBW” stamped on top.
(D)........................... 378178-S2...................ea............. 1.25
Zinc-plated with flag stamped on top. Includes 7⁄8" disc
washer.
(E)........................... 57140-S8.....................ea............. 1.25
AV9756
AV10823
C6TZ-17A012A
Jack Straps
Made to exact detail and includes better-than-OE anchor.
’66 - ’72
After serial #830,001.
Black satin............... C6TZ-17A012A............ea........... 12.95
Stainless steel......... C6TZ-17A012S............ea........... 19.95
C5ZZ1424A
C8TZ1424A
Black with disc washer.
’66 - ’77
For fenders, hood and radiator support. For use with j-clip
#AV3616. 5⁄16" – 18 × 1". Requires approximately 30 per
vehicle..................... AV9756........................ea............... .40
1⁄4" – 20 × 1⁄4". For use with #AV10050 and #AV10051.
................................ AV10823......................ea............... .50
AV3616
J-clip
5⁄16"
AV10050
C8TZ1424S
Spare Tire Mounting Plates
’68 - ’77
’68 - ’77
Without swing-away carrier.
Black....................... C5ZZ-1424A................ea............. 2.95
Chrome................... C5ZZ-1424C................ea............. 8.95
With swing-away carrier.
Zinc......................... C8TZ-1424A................ea............. 8.95
Stainless steel......... C8TZ-1424S................ea........... 11.95
AV10051
– 18. For use with body bolt #AV9756.
’66 - ’77
C5ZZ1424C
Stamping
on Bolts
Replacement Body Bolts
’66 - ’77
C6TZ-17A012S
................................ AV3616........................ea............... .75
b9az-1462a
C8Tz-1462a
C8Tz-1462S
Spare Tire Mounting Nuts
U-nuts
’66 - ’77
17⁄32"
center of hole to edge. For use with bolt #AV10823.
................................ AV10050......................ea............... .50
25⁄32" center of hole to edge. For use with bolt #AV10823.
................................ AV10051......................ea............... .60
’66 - ’69
’68 - ’77
Without swing-away carrier. 3⁄8" – 16.
................................ B9AZ-1462A................ea............. 2.95
Zinc......................... C8TZ-1462A................ea........... 13.95
Stainless steel......... C8TZ-1462S................ea........... 18.95
EXTERIOR
Fender Flares
EXTERIOR
38
C8TZ-142462K
Supertop®
C8TZ-142462SK
Spare Tire Mounting Plates with Nuts
’68 - ’77
Zinc......................... C8TZ-142462K............ea........... 19.95
Stainless steel......... C8TZ-142462SK..........ea........... 29.95
1/2"
A=
– 20
C = .618" / .628"
AV14231
Top
B
D6AZ-1107A
D6AZ1107A Top
Wheel Studs
× 20 ×
’67 - ’77
’76 - ’77
................................ 51533-01......................kit.......... 769.95
A C
D
Rear.
NOTE: Must ship truck freight.
’66 - ’77
B = 1.615" / 1.635"
D = .440" / .460"
AV14231
1⁄2"
Features the Bestop Belt-Rail® attachment system, eliminating snaps and
ensuring a tight fit. Supertop® features premium 18 oz. Haartz stretch-and-set
with high stain and mildew resistance; powder coated hardware for durability;
removable and replaceable D.O.T.-approved windows and exclusive tailgate
design that allows easy access to the tailgate without undoing the rear
window. Each Supertop® kit comes complete with hardware, soft-top and
windows. Black. 59" × 29" × 7". Will clear the factory roll bar by 3".
19⁄16".
Bikini Top
Easy on, easy off design. It extends over the sport bar and includes footman
loops for rear strap tie-down. It will provide quick protection against the sun or
showers. The traditional bikini top features reinforced edges to help eliminate
flapping, premium Haartz stretch-and-set fabric, marine grade industrial
thread, industrial grade webbing and heavy duty buckles. Black only.
NOTE: Windshield channel #5120601 must be installed first to ensure
proper fit.
’66 - ’77
................................ 52542-01......................ea......... 109.95
Grade 8. Screw-in.
5120601
................................ AV14231......................ea............. 1.95
Length: 1.720" / 1.750"; shoulder length: .445" / .460"
................................ D6AZ-1107A................ea............. 1.00
Windshield Channel
Required for installation of Bikini Top #52542-01.
’66 - ’77
c7Tz-1130H
................................ 5120601.......................ea........... 69.95
c6az-1130g
Hub Caps
15" diameter. Black trim. Made in the USA.
’66 - ’77
Front.
Anodized aluminum with hole in center for 4WD.
................................ C7TZ-1130H................ea........... 69.95
Rear.
Stainless with red center.
................................ C6AZ-1130G................ea........... 69.95
KY05618
Tow Hooks and Clip Kits
KY05619
Hooks provide an excellent attachment point for towing and recovery
products. Made of forged steel. Hooks should be mounted directly to
vehicle frame. Kits contain hook, clip, bolts, washers and nuts. Kits
contains 1 side only; 2 are generally needed per application.
Rated capacity: 10,000 lbs.
C7TZ1141H
C6AZ1141a
Black
Chrome
Vehicle Recovery Strap
Heavy duty tow strap designed to free stuck or
disabled vehicles from mud, sand, or snow. The
yellow nylon webbing stretches up to 20% and
recoils to its original length. Stronger and lighter
than chain, more compact than rope.
Hub Cap Center Emblems
Red plastic.
’66 - ’77
Front with 15" cap. For use with Hub Cap #C7TZ-1130H.
................................ C7TZ-1141H................ea........... 39.95
Rear with 15" cap. For use with Hub Cap #C6AZ-1130G.
................................ C6AZ-1141A................ea........... 39.95
................................ KY05618......................kit............ 15.95
................................ KY05619......................kit............ 15.95
Rated capacity: 20,000 lbs.
2" × 20'
................................ 02922...........................ea........... 32.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
39
Radiator Mount Brackets
RR-29
For use with 4 core radiator, part #92200-4 and radiator mount insulators, part #C6TZ-8125U below.
’69 - ’77
................................ 20400...........................set........... 32.95
4338
43385
C6TZ-8125U
B8100
Replacements
’66 - ’77
C6TZ-81253K
Radiator Mount Insulators
’69 - ’77
’66 - ’77
’69 - ’77
C6TZ-81254K
302. Use with 4 core radiator part #92200-4. Requires 4 per
vehicle. Use with bracket set part #20400.
Urethane................. C6TZ-8125U................ea............. 4.95
289, 302. Use with 3 core radiators.
Set of 4.................... C6TZ-81253K..............set........... 12.95
302. Use with 4 core radiators.
Set of 4.................... C6TZ-81254K..............set........... 12.95
Chrome
’66 - ’77
’66 - ’77
Billet
’66 - ’77
13 lbs....................... RR-29..........................ea............. 7.95
14 – 18 lb. for closed system radiator. Hex shaped.
. ...............................4338.............................ea........... 11.95
14 – 18 lb. billet cap with O-ring for standard sized fill neck.
. ...............................43385...........................ea........... 19.95
14 lbs....................... B8100..........................ea........... 34.95
Thermocap Radiator Cap
Provides better cooling efficiency, indicates coolant
temperature and helps prevent coolant injuries. Using
the temperature gauge, you can easily determine if it is
safe to remove the cap. Fits most domestic vehicles.
C6TZ-8A193K
C6TZ-8A193SK
Radiator Support Brackets
and Insulators
C6TZ-8A1934SK
13 lbs.
Radiator Drain Cock
Brass, made in the USA. Metal-to-metal seats provide
leak-proof performance and will take up to 150 PSI
pressure.
Each kit includes 2 upper and lower support brackets as well as insulators.
’66 - ’77
’66 - ’77
................................ 2470S..........................ea........... 34.95
’66 - ’68 289; ’69 - ’77 302. Use with 3-core radiators.
Black painted support brackets.
................................ C6TZ-8A193K..............kit............ 29.95
Stainless steel support brackets.
................................ C6TZ-8A193SK...........kit............ 39.95
’66 - ’68 289; ’69 - ’77 302. Use with 4-core radiators.
Stainless steel support brackets
................................ C6TZ-8A1934SK.........kit............ 39.95
’66 - ’77.............DV31............................ea............. 3.95
Radiator Caps
Brass Freeze Plug Kit
15-piece kit includes 6 brass plugs.
’66 - ’77
289, 302.................. 6483.............................kit............ 29.95
Motorcraft®
Zinc 13 lbs.
’66 - ’77
. ............................. RS62............................ea............. 9.95
C7AZ-8100Z
Reproductions – Show Quality
’66 - ’77
’66 - ’77
C8AZ-8100CHR
Zinc, 13 lbs.............. C7AZ-8100Z................ea........... 19.95
Autolite. 13 lbs. Chrome plated.
................................ C8AZ-8100CHR...........ea........... 19.95
Radiator Overflow Supply Tank
Plastic. Includes brackets and hardware.
’66 - ’68
289 to serial #C70,001.
................................ C6TZ-8A080A..............ea........... 39.95
ENGINE / RADIATOR
Radiator Caps Continued
ENGINE / RADIATOR
40
92200-3
92200-4
91844-3
Brass / Copper Radiators NOTE: There is a $10.00 boxing fee on all radiators.
’66 - ’69
’70
’71
’72
’73
’74
8-cylinder
’66
’67
’68
’69 - ’77
Kits include 4 original style tower band clamps or wire clamps and 6
heater hose clamps.
170.
3 core...................... 91844-3........................ea......... 279.95
170.
3 core...................... 92405-3........................ea......... 251.95
4 core...................... 92405-4........................ea......... 283.95
170.
3 core...................... 92530-3........................ea......... 251.95
4 core...................... 92530-4........................ea......... 283.95
170.
3 core...................... 92693-3........................ea......... 251.95
4 core...................... 92693-4........................ea......... 283.95
200.
3 core...................... 92873-3........................ea......... 251.95
4 core...................... 92873-4........................ea......... 283.95
200.
3 core...................... 93037-3........................ea......... 319.95
4 core...................... 93037-4........................ea......... 339.95
289.
3 core...................... 91846-3........................ea......... 299.95
4 core...................... 91846-4........................ea......... 329.95
289.
3 core...................... 91967-3........................ea......... 229.95
4 core...................... 91967-4........................ea......... 269.95
289.
3 core...................... 92070-3........................ea......... 299.95
4 core...................... 92070-4........................ea......... 349.95
302.
3 core...................... 92200-3........................ea......... 309.95
4 core...................... 92200-4........................ea......... 349.95
’66 - ’74
’66 - ’77
170, 200.
Kit of 10................... AK101..........................kit............ 24.95
289, 302.
Kit of 10................... AK102..........................kit............ 24.95
Wire Type
’66 - ’74
’66 - ’77 170, 200.
Kit of 10................... AK292..........................kit............ 34.95
289, 302.
Kit of 10................... AK293..........................kit............ 34.95
C6TZ-8146J
9113
396
Flex-A-Lite® Electric Fan – 16" S-blade
S-blade cage fans are designed for efficient air movement and quiet
operation. They free up horsepower that would have to be used to turn
a belt-driven fan. 8 blades, 163⁄4" × 153⁄4" × 37⁄8".
NOTE: Measure before ordering to ensure proper fit.
’66 - ’77
................................ 396...............................ea......... 169.95
Fan Blade – 17" V8
This high-quality all-steel fan looks like original equipment. Heavy duty
35º pitch 17" 6-blade fan. Can be used as a replacement. Doesn’t include
spacers.
NOTE: We have no control over installation of optional fan blades with regard to fan clearance and / or engine movement that could cause the fan to
damage other components. No payment will be made for damaged parts.
The fan will be replaced for defects in workmanship or materials ONLY.
Always measure carefully and check the condition of the engine mounts.
70786
Radiator Hoses – Curved
Upper
Reproduction.
’66 - ’68
’66 - ’74
’69 - ’77
.................................9113.............................ea........... 59.95
Fan Shroud
V8. To tank.
Cut to fit................... 70440...........................ea........... 11.95
’66 - ’70 6-cylinder; ’71 - ’72 170; ’73 - ’74 200, all with or
without A/C.
Cut to fit................... 70641...........................ea............. 8.95
302 with or without A/C.
................................ 70786...........................ea........... 12.95
’66 - ’77
Lower
’66 - ’70
AK292
Band Type
When ordering, please specify transmission type.
6-cylinder
AK102
Hose Clamp Kits
6-cylinder with or without A/C.
................................ 70308...........................ea........... 13.95
“Always receive excellent service when I call an order to your
company.”
– Natalie G.
289, 302.................. C6TZ-8146J.................ea........... 74.95
C1DZ-8592C
C3OZ-8592
Thermostat Housings and Gaskets
Cast Iron
’66 - ’74
170, 200.................. C1DZ-8592C................ea........... 16.95
Cast Aluminum
’66 - ’77
289, 302.................. C3OZ-8592..................ea........... 16.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
41
Chrome
Precision die-cast for a great fit, this thermostat
housing is first polished to a high luster, then beautifully chrome plated for lasting beauty. Includes Oring style seal and attaching hardware. Looks great
with chrome valve covers on page 52.
’66 - ’77 289, 302.................. 2662.............................ea........... 13.95
Heater Temperature Control Valve
’66 - ’77
................................ C3UZ-18495A..............ea........... 34.95
Heater Hose-to-Firewall Seal
NOTE: This is included in Heater Seal Kit (part #BR107) on page 12.
’66 - ’77
................................ 8C-18595.....................ea............... .95
HH65W
B308
AP60720
Thermostat and Gasket
HH68R
Thermostat
180º. Brass.
’66 - ’77
HH69R
170, 289, 302.......... B308............................ea............. 2.95
Gasket
HH70Y
180º.
’66 - ’77
HC209
170, 289, 302.......... AP60720......................ea............. 1.25
HH71Y
Original-style Heater Hoses and Clamp
Hoses
70646
C2OZ-BYP
C8AZ-BYP
Radiator Bypass Hoses
’66 - ’68
’66 - ’69
’70 - ’77
’71 - ’77
V8............................ 70001...........................ea............. 5.95
FoMoCo®................. C2OZ-BYP...................ea............. 7.95
Autolite.................... C8AZ-BYP...................ea............. 6.95
302 (5.0 L).
Cut to fit................... 70646...........................ea............. 7.95
5⁄8"
I.D. black ribbed hoses with correct date codes, except where noted.
’66 - ’67
’68
’69
’70
’71 - ’77
White stripe without date code. Two 4' lengths.
................................ HH65W........................pr............ 24.95
................................ HH68R.........................ea........... 24.95
................................ HH69R.........................ea........... 24.95
................................ HH70Y.........................ea........... 24.95
................................ HH71Y.........................ea........... 24.95
Clamp
FP1464
’66 - ’77
FP1456
PW153
WP953
C2OZ-18599B
Water Pumps
’66 - ’74 ’66 - ’77
’69 - ’77
................................ HC209..........................ea............. 3.00
170, 200.................. FP1464........................ea........... 54.95
’66 - ’72 289, 302; ’73 302; ’74 302 without T/E; ’75 - ’77
302.
Note: All 302s are with RH radiator outlets.
Aftermarket............. FP1456........................ea........... 49.95
302 with LH radiator outlet.
Motorcraft®.............. PW153.........................ea......... 106.95
Aftermarket.............. WP953.........................ea........... 49.95
C6AZ-18599S
C3UZ-18495A
Heater Hose Connectors
’66 - ’74
’66 - ’72
170, 200.
Silver zinc plated.... C2OZ-18599B..............ea........... 21.95
289, 302.
gold zinc plated...... C6AZ-18599B..............ea........... 16.95
silver zinc plated..... C6AZ-18599S..............ea........... 16.95
chrome zinc plated.. C6AZ-18599C..............ea........... 21.95
Oil Cooler
Front
Uses a “stacked plate” design and
improves efficiency 35% over conventional fin-type coolers. Includes
all fittings, instructions and attaching
hardware. Measures 8" × 11" × 111⁄2".
Side
Water Pump Pulley
Single groove.
’67
289.......................... C5OE-8509R...............ea........... 49.95
Fits vehicles with FL-1A oil filter.
................................ M6642S101.................ea......... 119.95
ENGINE / RADIATOR
Thermostat Housings and Gaskets Continued
ENGINE / TIMING CHAIN / WASHER / SOLENOID
42
Windshield Washer Bag Cover
’66 - ’67..........B8S-17632A................ea............. 5.95
D3OZ-6019A
C2OZ-6023B
Timing Pointer
’66 - ’73
289, 302.................. C2OZ-6023B................ea............. 9.95
C1AB-17651A
Windshield Washer Bag Bracket and Screws
Bracket
Timing Chain Cover
’66 - ’67
’66 - ’77
Screws
289, 302.................. D3OZ-6019A................ea........... 69.95
AK122
’66 - ’67
................................ C1AB-17651A..............ea........... 14.95
. ............................. AK122..........................pr................ .65
Roller Timing Set by Cloyes®
Set includes cast-iron cam sprocket, double roller chain
and induction hardened crank sprocket. The True® roller
chain is seamless with .250 rollers. The three keyway
crank sprocket allows for crankshaft timing adjustment
by ±4º. Made in the USA.
’66 - '77 289 / 302 with 1-piece fuel pump.
..........................91135...........................set........... 62.95
Windshield Washer Pumps
C8TZ17618A
D1TZ17618B
Plastic Windshield Washer Reservoirs
’68 - ’70
’71 - ’77
................................ C8TZ-17618A..............ea........... 29.95
Genuine Ford.......... D1TZ-17618B..............ea........... 36.95
Windshield Washer Tank Screw Kit
’66 - ’77
C1AZ-17664A
6201
E0AZ-17664A
Windshield Washer Hose
Pumps
Pump only; does not include hose or hardware. Reproductions.
1 ⁄4 "
’66 - ’67
’71 - ’77
’71 - ’77
’66 - ’69
Includes hardware and wire harness.
................................ C1AZ-17664A..............kit............ 39.95
For use with plastic reservoir.
................................ 6201.............................ea........... 19.95
For use with part #D1TZ-17618B reservoir below.
................................ E0AZ-17664A..............ea........... 19.95
diameter. Sold by the foot.
................................ 99A-17543...................ft................. .95
Windshield Washer Hose Tee
’66 - ’67
................................ C0AB-17A601A...........ea............... .75
Starter Solenoids
6501
6601
Pump Kits
6001BLK
Kits include pump, hose and hardware.
’66 - ’67
’66 - ’77
6002BLK
6001BRN
For use with bag (not included).
................................ 6501.............................ea........... 19.95
For use with reservoir (included).
................................ 6601.............................kit............ 49.95
6002BRN
6006BLK
Reproductions
Windshield Washer Bag
Wide blue bag with white FoMoCo® block logo and screw-on top.
’66 - ’67
................................ C4AZ-17618US...........ea........... 29.95
’66
’66
’67 - ’71
FoMoCo® script.
Black....................... 6001BLK......................ea........... 29.95
Brown...................... 6001BRN.....................ea........... 42.95
FoMoCo® block lettering.
Black....................... 6002BLK......................ea........... 29.95
Brown...................... 6002BRN.....................ea........... 39.95
Autolite, black only.. 6006BLK......................ea........... 34.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
43
AK266
Starter Solenoids Continued
Replacements
’66 - ’77
Motorcraft®.............. SW3.............................ea........... 27.95
Import...................... SW3-AR.......................ea............. 6.95
Duralife heavy duty SW3HD........................ea........... 10.95
D0AZ-10756A
C5AZ-10718A
Battery Hold-down Hardware
’66 - ’77
’66 - ’77
Clamp.
Import...................... C5AZ-10718A..............ea............. 7.95
J-bolts. Requires 2 per vehicle.
................................ D0AZ-10756A..............ea............. 2.50
Starter Solenoid Mounting Screws
Set of 4.
’66 - ’77
................................ AK266..........................set............. 1.00
Battery and Related
NEGSW
AP15
Negative Battery Cable Switch
M300
Keeps battery charged up without having clocks and accessories drain
battery while parked for extended times.
................................ NEGSW.......................ea............. 8.95
Batteries
Sealed, maintenance-free, valve-regulated batteries
painted exactly as the Ford OEM designed Autolite
battery with the top script painted red and the front
script unpainted. Valve-regulated batteries operate
within the same voltage ranges as regular wet
S24F
batteries and can be charged with a conventional
charger. A fully-automatic charger is recommended to eliminate the
possibility of overcharge. A battery maintainer is recommended when
storing your vehicle for more than 90 days. Features authentic looking
non-removable battery caps and actually have a small pressure relief
valve designed into them to keep the battery at proper operation pressure.
This battery requires no maintenance ever. Shipped fully charged.
Anti-corrosion Battery Washers
4-year pro-rated manufacturer’s warranty. Must retain invoice.
Fully automatic with float-mode monitoring. Ideal for maintaining stored batteries. Keeps stored lead-acid batteries
charged. Maintains the battery when fully
charges and resumes continuous charging when battery becomes discharged.
Features 6' power and output cords for a combined 12' reach. 1.5 amp.
NOTE: Shipping charge for batteries is $39.95 each.
’66 - ’72
780 cranking amps at 32º F, 700 cranking amps at 0º F.
103⁄4" × 63⁄4" × 9"..... S24F............................ea......... 254.95
830 cranking amps at 32º F, 750 cranking amps at 0º F.
12" × 63⁄4" × 9"........ S27F............................ea......... 274.95
This sealed zero-maintenance battery combines
proven lead-acid electrochemistry with advanced
design techniques to create a battery that outperforms the rest of the field. Made in the USA.
2-year manufacturer’s replacement warranty;
the remaining 48 months are pro-rated.
12 volt. 800 cold-cranking amps. 120 minute reserve capacity. Weight:
39.5 lbs. Call for shipping.
NOTE: Shipping charge for batteries is $39.95 each.
................................. KY800U.......................ea......... 179.95
Autolite Battery Cover
’66 - ’72...........24FCOVER..................ea........... 34.95
................................ AP15............................pr.............. 1.00
Battery Box
For mounting battery in trunk or other locations. Fits Group 24F batteries. Includes tie-down strap, brackets and screws.
................................ M300............................ea........... 16.95
Battery Maintainer
by Schumacher
Optima Battery
Slips over battery stud before cable end is installed.
................................ 6267.............................ea........... 34.95
Battery Tender® Plus
This 1.25 amp battery charger is designed
to fully charge and maintain a battery at a
proper storage voltage without the damaging effects that trickle chargers may cause.
Its “BTP” microchip technology applies the
correct peak charge, then automatically
maintains the battery at the perfect float voltage, which virtually eliminates
battery-destroying sulfation! Result: a battery that is ready to go when you
are and has an extended life. Features a powder coated aluminum chassis,
built-in 72-hour timer that will protect a marginal battery from overcharging,
and is spark-proof. Works on lead-acid, sealed calcium, or gel batteries.
10-year manufacturer’s warranty.
................................ 0210128.......................ea........... 62.95
Battery Tray
’66 - ’77
From serial #760,001.
................................ C6TZ-10732F..............ea........... 19.95
ENGINE / SOLENOID / BATTERY
SW3
ENGINE / VOLTAGE REGULATOR / ALTERNATOR
44
Alternators Continued
55 Amp, Single Pulley
’69
C5TF-AUTOLITE
55 Amp, Double Pulley
D0AF-10316A
D3AF-MOTORCRAFT
302 with A/C, P/S.
Before 2/69.............. C6AF-10300F..............ea......... 184.95
After 2/69................. C6AF-10300FD............ea......... 209.95
’69
302 with A/C and without P/S.
Before 2/69.............. C6AF-10300G..............ea......... 184.95
After 2/69................. C6AF-10300GD...........ea......... 209.95
C8TF-10316
Voltage Regulators
7058
Show Quality Reproductions
With 38 / 42 Amp Alternator
’66 - ’67
With A/C.
Black with yellow print and Autolite logo.
................................ C5TF-AUTOLITE.........ea........... 39.95
’68
Without A/C.
Blue with silver print and Autolite logo.
................................ C8AF-AUTOLITE.........ea........... 39.95
’70 - ’71
................................ D0AF-10316A..............ea........... 39.95
’72
Blue with silver print and Motorcraft® logo.
................................ D2AF-10316A..............ea........... 39.95
’73
Without A/C.
Blue with yellow print and Motorcraft® logo.
................................ D3AF-MOTORCRAFT..ea........... 39.95
With 45 / 55 Amp Alternator
’68 - ’71
Blue with yellow print and Autolite logo.
................................ C8TF-10316.................ea........... 39.95
’70 - ’71
................................ D0AF-10316A..............ea........... 39.95
’72
With A/C.
................................ D2TF-MOTORCRAFT..ea........... 39.95
’73
With A/C.
................................ D3TF-MOTORCRAFT..ea........... 39.95
Remanufactured Alternators
Fan and pulley not included.
’66 - ’76
’77
PA70
................................ GR540AHD..................ea............. 9.95
NOTE: 1-year warranty. Defective alternator must be returned in its
original box.
Chrome
’66 - ’77
’66 - ’77
Fits most vehicles with alternators that have a small case.
................................ PA70............................ea......... 159.95
Fits most vehicles with OE small case alternator with ear
holes 6.875" center-to-center and an external regulator.
Features only 1 wire from the alternator to the battery,
thereby eliminating your firewall-mounted regulator.
................................ PA70-1.........................ea......... 189.95
Natural Finish
’66 - ’77
Voltage Regulator Mount Screws
Features only one wire from the alternator to the battery,
thereby eliminating your firewall-mounted regulator.
. ............................. PA70-1N......................ea......... 119.95
Alternator Bracket
Set of 4.
'66 - '77
Chrome plated.
................................ AK266..........................set............. 1.00
’66 - ’77 289, 302
.....................MG5185.......................ea........... 24.95
Typical
Alternator
C8AL-625
Alternator Mounting Kits
Alternators
Fan and pulley not included.
38 Amp, Single Pulley
’72
’73
PA70-1N
Premium 70 amp alternators. Includes pulley and fan.
’66 - ’77
PA70-1
Alternators – 70 Amp
Electronic Replacement
’66 - ’72; ’73 - ’74 200; ’73 - ’76 302.
40 - 65 amps, single pulley.
................................ 7058.............................ea........... 54.95
All.
70 amp, single pulley.
NOTE: Core fee is refundable upon return of the old unit
and must be returned with box in which the remanufactured
unit was shipped.
............................... KY7072........................ea........... 89.95
Core fee.................. KY7072CORE.............................35.00
302 without A/C....... D2OF-10300CA...........ea......... 209.95
302.......................... D3ZF-10300AA............ea......... 209.95
’66 - ’67
’68 - ’69
’70 - ’73
289 without spacer.
5 piece kit................ C5AL-621.....................kit.............. 7.95
289, 302 with gold spacer.
5 piece kit................ C8AL-625.....................kit............ 16.95
302. Kit includes bolt, washer and spacer.
3 piece kit................ D0OL-3314..................kit............ 16.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
45
C5AZ10344L
Alternator Pulleys
’66 - ’73
’66 - ’73
C5AL-643
C7AL-644
Alternator Pulley Nuts and Washers
’66
’67 - ’77
Clear zinc................ C5AL-643.....................ea............. 2.00
Gold zinc................. C7AL-644.....................ea............. 2.00
C5AZ10A310
D0AZ10A310B
Alternator Fan Blades
’66 - ’69
’69 - ’77
04-3124
04-3135
04-3132
04-3131
04-3153
04-3154
2.62" single, use with single pulley alternators.
................................ C5AZ-10344K..............ea........... 15.95
2.62" double, use with double pulley alternators.
................................ C5AZ-10344L..............ea........... 22.95
Before 10/69.
13-blade, gold zinc dichromate.
................................ C5AZ-10A310..............ea............. 9.95
After 10/69.
10-blade.................. D0AZ-10A310B............ea............. 9.95
Alternator One-wire
Conversion Kit
Convert your externally regulated Ford alternator to one wire with this regulator. Kit includes
Ford single wire voltage regulator for 38, 42,
45, 55, or 61 amp alternators; two spacer nuts;
four terminal nuts; one battery terminal nut.
Starters – Remanufactured
All starters come with a 12 month or 12,000 mile warranty and require a
$20.00 core fee.
’66 - ’68
’66 - ’74
’66 - ’77
’72 - ’74
’77
’77
’66 - ’68 289 with A/T; ’69 - ’77 302 with A/T before 2/1/77.
................................ 04-3124........................ea........... 49.95
Core fee......................................................................25.00
’66 - ’72 170; ’72 170 A/T; ’73 - ’74 200 M/T.
................................ 04-3135........................ea........... 49.95
Core fee......................................................................25.00
’66 - ’68 289 M/T; ’69 - ’77 302 M/T before 3/1/77.
................................ 04-3132........................ea........... 49.95
Core fee......................................................................25.00
’72 170 M/T; ’73 - ’74 200 A/T.
................................ 04-3131........................ea........... 49.95
Core fee......................................................................25.00
302 A/T after 2/1/77.
................................ 04-3153........................ea........... 49.95
Core fee......................................................................25.00
302 M/T after 3/1/77.
................................ 04-3154........................ea........... 49.95
Core fee......................................................................20.00
New Starter
Comes clocked from the manufacturer to fit
most applications. The mounting block can be
re-clocked as required. Includes spacer ring
and instructions. 90-day warranty for street
applications.
NOTE: Full instructions come with the kit.
................................ F10316SW...................kit............ 39.95
’69 - ’77 302 with A/T or 5-speed M/T.
............9603FX........................ea......... 149.95
090005
74076LFU
Sure Fit® A/C Systems
These systems are designed to attach to existing holes in your dash
and firewall without drilling or fabrication. The kits come complete with
everything you need:
15
Oil Pan Drain Plugs
1⁄2"
stud. Includes gasket.
’67 - ’77
Evaporator Kit: A/C, heating and defrost combination designed specifically for your vehicle. Comes complete with all mounting brackets, hardware, louvers, duct hose, wiring harness and installation instructions.
Magnetic
Condenser Assembly: Comes complete with condenser, mounting brackets, standard drier, preformed aluminum lines and mounting hardware.
’66 - ’77
................................ 090005.........................ea............. 3.95
Accumulates metal particles found in the oil, preventing possible damage to the engine.
................................ 15.................................ea............. 6.95
Please have the following information available when ordering:
• whether the crank shaft has a 3-bolt or 4-bolt pulley
• the outside-to-outside diameter of any lip that may be on the damper
• the height and width of the radiator
• vehicle type and year
• engine size
’66 - ’77
R-12 refrigerant....... 74076LFU....................ea...... 1,125.00
’66 - ’77
R-134a refrigerant... 74076LFUA..................ea...... 1,125.00
Oil Dipstick
’71 - ’77 302.
Produced from Ford factory specifications with exact details
stamped on the indicator end. The handle is polished stainless steel................. D1TZ-6750BAC...........ea........... 19.95
ENGINE / ALTERNATOR / AIR CONDITIONER / STARTER / OIL
C5AZ10344K
ENGINE / OIL
46
5723
57235
Oil Filter Relocation Kit
Oil Dipsticks and Tubes
289, 302, 351W.
Chrome handle stick, tube and adjustable bracket. Gold irridite finish on the stick itself will not flake. Markings match
original equipment... 5723.............................ea........... 16.95
Billet dipstick, tube and adjustable bracket. Features a tube
base made to OE specifications for a correct fit.
................................ 57235...........................ea........... 19.95
’66 - ’77
................................ MRG7682....................kit............ 69.95
Oil Pressure Sending Switch
’66 - ’77
8-cylinder with gauge.
.....................SW1547B.....................ea........... 14.95
Crankcase Ventilation Breather
Oil Dipstick Tube
Made from Ford factory specs and features a polished chrome finish to
dress up the engine. This is the tube only and is the screw-in type.
’71 - ’77
Relocates the oil filter to an easy access location inside of the engine
compartment. Filter not included.
302 with threaded oil pan.
................................ D1TZ-6754C................ea........... 24.95
Replacement type.
’73 - ’74
6-cylinder................. FA87............................set............. 1.95
Oil Filler Caps
Logo on Top
Oil Pan Gasket Set
Made of quality fibrous material with a rubber binder. Can withstand temperatures to 350º F. Includes LH and RH gaskets and front and rear seals.
’66 - ’77
’66 - ’68 289; ’69 - ’77 302.
............................... 16322...........................set........... 14.95
EC-31
Black
’66 - ’67
’66 - ’74
’68 - ’70
FL-1A
M6731FL1A
C1AZ-6731A
C5ZZ-6766A
C8AZ-6766A
Push-on with tube.
Motorcraft®.............. EC-31...........................ea........... 29.95
Reproduction with FoMoCo block logo stamped on top.
............................... EC-31FB......................ea........... 19.95
Push-on without spout, with FoMoCo script logo stamped
on top...................... C5ZZ-6766A................ea........... 14.95
Closed emission.
Twist-on with elbow. Features 3 built-in filters. Includes
grommet in the top of the cap.
............................... C8AZ-6766A................ea........... 29.95
Oil Filters
Motorcraft® Standard.
................................ FL-1A...........................ea............. 4.95
Ford RacingFeatures a heavy duty steel casing, a high capacity media
that meets the demands of a high performance engine and
a silicone anti-drainback valve for protection at start up.
................................ M6731FL1A.................ea........... 19.95
Autolite
Reproduction. White.
................................ C1AZ-6731A................ea........... 34.95
Logo on Top
C5ZZ-6766B
C5ZZ-6766D
C8AZ-6766B
Chrome
Chrome Oil Filter
’66 - ’74
This show quality triple-process hand-polished chrome
filter exceeds all OEM specifications and removes engine
damaging particles. Features include roll-formed threads
for precise spin-on fit, triple process chrome that won’t peel
or flake, pleated element design to increase filtering area.
Also includes a steel back plate for added protection against
pressure surges, a gasket retainer and sealing gasket to prevent leaks, a
cured resin impregnated element to remove harmful particles and a rolled
seam housing that withstands over 200 PSI.
’66 - ’71 Logo on Top
V8 with spin-on filter.
................................ 22400...........................ea........... 27.95
’66 - ’74
’68 - ’70
Push-on without spout, with FoMoCo script logo stamped
on top...................... C5ZZ-6766B................ea........... 19.95
Push-on with spout, with FoMoCo block logo stamped on top.
................................ C5ZZ-6766D................ea........... 19.95
Closed emission.
Twist-on with elbow. Autolite logo on the top. Includes
grommet in the top of the cap.
............................... C8AZ-6766B................ea........... 39.95
Yellow
Genuine Ford.
’67 - ’77..........EC682..........................ea........... 29.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
47
Harmonic Balancer Rebuild
***Call our Rebuild Department to place an order or for any questions
concerning Rebuilds.***
43105
17385
Billet
Twist-lock. Includes gasket.
............................... 43105...........................ea........... 12.95
Push-on. Fits most valve covers with a 11⁄4" hole.
............................... 17385...........................ea........... 12.95
Harmonic balancers fail for many reasons: heat, cold, fire, age, gasoline,
oil, petroleum fluids of any kind, grease, stripping bath solutions, etc. The
replacement material we use is virtually impervious to all of these, except
fire. Our quality harmonic balancer rebuild consists of replacement of the
cylindrical rubber or neoprene. The hub is placed in a press to remove
rubber, wire brushed if necessary, and bead blasted to ensure a clean
bonding surface. The two parts are aligned vertically, horizontally and concentrically. The cylindrical space is then poured with black silicon polymer,
placed in a vacuum chamber to remove entrained air, and then vulcanized
in a laboratory oven. Please allow three weeks plus shipping time for rebuild. You must supply a core for rebuild or you can purchase a core when
available, with no core refund, from our Rebuild Department.
NOTE: We can also install outer shaft seal sleeves if shafts are badly
worn or pitted for an additional $25.00.
’66 - ’77
Replacement Chrome Oil Filler Cap
For use with small-block valve covers on page 52.
................................ HBR.............................starts at 149.95
Core Fee................. HBRCORE................................100.00
Push-on................... 2060.............................ea............. 6.95
Carburetor Return Spring Bracket
’66 - ’68 289 2/B before 5/8/68.
.......................C7OZ-9741A................ea............. 9.95
Oil Filler Cap Adapter
Allows you to use a push-on type oil filler cap with a twiston type filler hole. Includes gasket.
................................ C5AZ-6A868A..............ea........... 14.95
HC80457S
HC1850C
Holley® Carburetors
’66 - ’68
C5AZ-6316B
C2DZ-6312A
80006
D2TZ-6316B
’66 - ’77 V8.
Features an electric choke and a shiny finish. It’s calibrated
for excellent street performance and is 50-state emission
legal. 4/V, 600 CFM.
................................ HC80457S...................ea......... 359.00
Manual choke with power valve blow-out protection and vacuum secondaries. Comes with a fast idle adjustment and PVC
spark ports, carburetor to engine gasket, air cleaner gasket,
two fuel fittings with gaskets and instructions. Classic finish.
4/V, 600 CFM........... HC1850C.....................ea......... 299.95
D2OZ-6316A
Harmonic Balancers
’66 - ’68
’66 - ’69
’66 - ’74
’70 - '72
’73 - ’77
289.
3 bolt....................... C5AZ-6316B................ea........... 99.95
289, 302 engines.
6.4". Features a 28.4 oz. counterweight and is made to the
early style short length. Includes both 3- and 4-bolt pulley
patterns as well as 3 sets of timing marks.
................................ 80006...........................ea........... 94.95
’66 - ’67 170; ’68 - ’72 170 with a single groove; ’73 200
with a single groove.
529⁄32" O.D............... C2DZ-6312A................ea........... 89.95
302.......................... D2TZ-6316B................ea......... 129.95
302.......................... D2OZ-6316A................ea........... 99.95
HB3121
54000
Typhoon Aluminum Intake Manifolds
Cast with permanent steel molds, these Typhoon™ intake manifolds
by Power+Plus® provide outstanding power and torque. They have a
high-rise dual-plane intakes with perform best in the 1,500 to 6,500 RPM
range with excellent throttle response. They have larger plenums and
runners which match higher lift cams and free-flowing exhaust found on
many high performance street machines.
’66 - ’77
289, 302.
Polished.................. 54000...........................ea......... 249.95
Satin finish................54001...........................ea......... 179.95
Chrome....................54002...........................ea......... 299.95
HB3124
Harmonic Balancer Repair Sleeves
’66 - ’74
’66 - ’77
’66 - ’72 170; ’73 - ’74 200.
................................ HB3121........................ea............. 4.95
’66 - ’68 289; ’69 - ’77 302.
................................ HB3124........................ea............. 4.95
Intake Manifold Gaskets
For use with Typhoon aluminum intake manifolds above.
’69 - ’71
302.......................... 23049...........................set........... 14.95
ENGINE / OIL / HARMONIC BALANCER / FUEL
Oil Filler Caps continued
ENGINE / FUEL
48
TCHT
TCU
Edelbrock® Intake Manifold
Made in USA.
’66 - ’72
289, 302 without EGR.
................................ 2121.............................ea......... 184.95
Throttle Cables – Universal 24"
These are not direct factory replacements. May require modification.
Braided cable.......... TCHT...........................ea........... 59.95
Stock cable.............. TCU.............................ea........... 49.95
Edelbrock® Intake Manifold Gaskets
SP2418
For use with intake manifold part #2121 above.
’66 - ’72
................................ 7220.............................set........... 21.95
SP24283
Universal Throttle Cable Brackets
Easy to install. Features adjusting screw to maintain proper alignment of
throttle cable. Chrome finish.
Intake Manifold Gasket
Made of a graphite facing mechanically bonded to perforated metal
which is most suitable for sealing hot exhaust gases.
’66 - ’74
All 2/B and 4/B.
Without A/T kick-down cable bracket.
................................ SP2418........................ea........... 14.95
With A/T kick-down cable bracket.
................................ SP24283......................ea........... 23.95
’66 - ’72 170, ’73 - ’74 200.
................................ 23025...........................ea........... 10.95
FG2
Universal Throttle Spring
FG14C
................................ 329013.........................ea............. 2.50
Fuel Filters
Universal throttle spring Kit
Triple chrome plated. Use the dual springs for additional return response
needed with any high performance carburetor.
’66 - ’77
In-line...................... FG2..............................ea............. 3.95
In-line, front of carburetor.
................................ FG14C.........................ea............. 2.95
................................ 4700.............................kit.............. 8.95
10205
10220RE
Inline Street Performance Fuel Filter
and Element
Filter
Billet aluminum with a sintered bronze element. See part #10220RE for
the replacement element.
Universal Throttle
Return Spring Bracket
’66 - ’77
Triple chrome plated. Designed for multiple mounting points and easy to
install. For springs, see part #4700, above.
................................ 4708.............................ea............. 6.95
With 3⁄8" fuel line...... 10205...........................ea........... 15.95
Element
Replacement element for fuel filter above.
................................ 10220RE......................ea............. 5.95
Electronic Fuel Pump
Universal Throttle Cable – 36"
Compatible with all fuels and additives, and eliminates vapor lock. Solid
state two-wire design. Self-priming and easy to install. 12 volt.
Stainless braided housing. Kits contains all hardware and fasteners.
’66 - ’77
................................ PRO12S.......................ea........... 41.95
................................ 2431.............................kit............ 44.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
49
M6588
M6399
Fuel Lines
Fuel Pumps
’70 - ’74
170, 200.................. M6399..........................ea........... 39.95
302.......................... M6588..........................ea........... 44.95
Fuel Pump Mounting Gasket
Replacement.
’66 - ’72 66 - ’68 289; ’69 - ’72 302.
............................. C3AZ-9417CNOS........ea............. 2.95
Chrome-Plated
Fuel Pump –
Replacement
Recommended for stock and street performance. New, not rebuilt. Features 8 PSI
shutoff pressure with delivery up to 80 GPH
(Gallons Per Hour) free flow. 1⁄4" NPT inlet /
outlet ports complete with 3⁄8" diameter fuel
hose fittings. For use on engines up to 400 hp. Its rugged construction
and premium quality components assures long term reliability.
221, 260, 289, 302, 351W.
................................ 7705FP........................ea........... 99.95
Holley® Fuel Pump
Has a 71⁄2 PSI pre-set shut off, 80 GPH
(Gallons Per Hour) capacity and its solid
construction is great for continuous high
RPM operation. Can be rotated for various
plumbing designs. Includes gasket.
These reproduction lines are pre-bent using a sample from an original
car as a pattern.
Please add “SS” to the part number when ordering stainless steel.
NOTE: These are custom-made special-order parts that take 2 to 4
weeks for delivery. There is a $10.00 per order boxing fee for larger
lines, and addition shipping charges may apply.
Original
Stainless
Pump-to-Carburetor Line
’66 - ’67
’68
’68 - ’77
’69 - ’77
289 2/B...................FBE6601..............24.95............... 29.95
289 2/B.
1 piece.................... FBE6801..............24.95............... 29.95
6-cylinder................FBE6902..............24.95............... 29.95
302 2/B.
1 piece.................... FBE6901..............24.95............... 29.95
Fuel Tank Vent Line
’73 - ’77
2 piece set..............FBF7101..............54.95............... 83.95
Fuel Vapor Line
’77
2 pieces..................FBF7703..............79.95..............118.95
Main Fuel Line
’77
’77
With rear tank.
2 pieces..................FBF7702..............77.95..............118.95
With dual tanks.
3 pieces..................FBF7701..............79.95..............118.95
FMSU1
NOTE: This product is not legal for sale or
use in California.
’66 - ’77
’66 - ’68 289; ’69 - ’77 302.
................................ 12833...........................ea........... 99.95
D0BZ-9275C
D7TZ-9275F
Universal Fuel Line
Hose and Clamp Kit
Fuel Tank Sending Units
Kit includes 36" of hose, 8 spring clamps and 8 keystone clamps.
With 5⁄16" fuel hose.
................................ HHK0001.....................kit............ 11.95
’66 - ’77
’66 - ’70
’73 - ’76
’75 - ’77
Stainless steel, includes gasket. Use with MTS fuel tanks
on next page........... FMSU1.........................ea........... 69.95
’66 - ’69 all; ’70 without EV/EM.
Includes gasket....... D0BZ-9275C................ea........... 69.95
’73 without fuel vapor return tube; ’74 - ’76 all.
Stainless steel. Includes gasket.
Without auxiliary fuel tank.
................................ D0BZ-9275C................ea........... 69.95
With auxiliary fuel tank.
................................ D7TZ-9275F................ea........... 69.95
V8. Use with auxiliary fuel tank.
Stainless steel. Includes gasket.
................................ D7TZ-9275F................ea........... 69.95
ENGINE / FUEL
Typical Fuel
Lines
ENGINE / FUEL
50
Fuel Tanks continued
D1AZ-9A011A
D1FZ-9A011A
Fuel Sender Filters
’66 - ’77
’66 - ’77
All with 3⁄8" tube....... D1AZ-9A011A..............ea............. 9.95
All with 5⁄16" tube..... D1FZ-9A011A..............ea............. 9.95
Rear Main Tank – 13 Gallon – 21" × 20" × 10"
’66 - ’70
’70 - ’76
15309
C0AF-9276A
C0AZ-9A307B
MTS4242
MTS4241
’66 - ’69 all and ’70 without EV/EM.
................................ MTS4241.....................ea......... 249.95
’70 with EV/EM; ’71 - ’76 all. Will also work as a replacement main tank for ’77 but will need to change sending unit
and use straps part #FMGTSR-2.
................................ MTS4242.....................ea......... 249.95
Fuel Sender Float
Brass canister.
’66 - ’77
Fuel Tank Straps
Fuel Sending Unit Gasket
’66 - ’77
FMGTSR-2
................................ 15309...........................ea............. 5.95
................................ C0AF-9276A................ea............. 1.50
’66 - ’76
’66 - ’76
Rear tank................. FMGTSR-2..................ea........... 19.95
Auxiliary tank........... FMGTSS-2...................ea........... 39.95
Fuel Sender Locking Ring
’68 - ’73
................................ C0AZ-9A307B..............ea............. 5.95
Fuel Tank Recondition – Metal Tanks Only
***Call our Rebuild Department to place an order or for any questions
concerning this process.***
If you can’t find your tank new, have your old one reconditioned! Your
tank can be punctured, scraped, or damaged causing rust and corrosion. A
chemical bonding repair process can fix it. This process is completely compatible with gasoline, diesel fuel, high octane, methanol and alcohol. There
is a manufacturer's limited lifetime warranty on passenger car and light truck
tanks, two years on all others. If you do not have a tank to be reconditioned,
call our Rebuild Department for availability of a tank. You may purchase
a tank, when available, with no core refund from our Rebuild Department.
Please allow three weeks plus shipping time for this process.
C6TZ-9047C
Fuel Tank Filler Pipe Hose
Main tank to filler pipe.
’66 - ’76
................................ C6TZ-9047C................ea........... 11.95
Fuel Tank Filler Pipe Hose Clamp
’66 - ’76
Requires 2............... B-8287.........................ea............. 1.95
RG23
NOTE: FLUSH TANK BEFORE shipping! sending units and vents
MUST be removed and all holes taped shut prior to shipping.
B-8287
.....................................................................ea......... 299.95
D1PZ-9030K
Fuel Caps
MTS4239
MTS4240
’66 - ’70
’71 - ’76
MTS COMPANY, L.C.
Polyethylene gas tanks. 1-piece construction – no welds or seams to fail.
Lasts a lifetime. Includes o-ring and locking ring if needed. Made in the
USA. Use with fuel sender part #FMSU1 on previous page.
Chrome top............. RG23...........................ea............. 8.95
Chrome top............. D1PZ-9030K................ea............. 8.95
Fuel Tanks
NOTE: There is a $10.00 boxing fee for these items.
(A)
(B)
Side
Side
Front Auxiliary Tank – 11 Gallon
Billet Aluminum
’66 - ’70 ’70 - ’77
’66 - ’70
’66 - ’69 all and ’70 without EV/EM.
................................ MTS4239.....................ea......... 249.95
’70 with EV/EM; ’71 - ’77 all.
NOTE: On ’73 - ’77 you need to use longer bolts at end of
straps and drill a new hole in the crossmember to allow for
a location change in the vent tube. This tank is not exact as
the original. The vent tube and fuel sender location is different than original....... MTS4240.....................ea......... 249.95
(A), (B)Top
Durable fuel caps built from solid billet aluminum. Features a smooth
surface with a tough outer grip.
(A)........................... C6TZ-9030BL1............ea........... 49.95
’71 - ’76
(B)........................... C6TZ-9030BL2............ea........... 49.95
Air Bypass Valve
’68 289 with T/E.
...................C8AZ-9B289B..............ea......... 119.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
51
Made of cotton fiber. Blue.
.................48026...........................ea........... 24.95
1486A
E1040
E1200
1485A
Replacement Filters for Above Air Cleaners
For cleaner #1491........................ 1486A..........................ea............. 8.95
For cleaner #1490........................ 1485A..........................ea............. 8.95
Air Cleaner Filter – Replacement
K&N® manufactures the world’s best air filter. A high-flow, washable filter
that’s proven to be the best. Economically and ecologically sound because you don’t throw it away. You buy it once, clean and re-oil it again
and again. Replaces stock elements and is street legal. 10-year / one
million mile limited warranty.
’66 - ’77
’68 - ’74
’66 - ’68 289 2/B; ’69 - ’77 302 2/B.
................................ E1040..........................ea........... 42.95
’68 - ’72 170 1/B; ’73 - ’74 200 1/B.
................................ E1200..........................ea........... 47.95
2/B
Classic design with chrome-plated top. Includes filter, gasket, hardware,
and PCV adapter.
For vehicles with 25⁄8" or 31⁄16" diameter neck.
..................................KY9798........................ea........... 29.95
Air Filter Recharger
This is all you need to clean your K&N air filter to brand new
condition. Comes with spray bottle filled with pre-soak liquid and
aerosol can filled with specific filter oil. Use on K&N filters.
.................................. 995000.........................ea........... 11.95
Replacement Filter for Above Air Cleaner
10" × 2"
Air Cleaner Filter
............................... 6479.............................ea............. 8.95
’66 - ’77 289, 302.
......................C2OZ-9601A................ea............. 9.95
Hi-Po Air Cleaner
AK225
AK241
Air Cleaner Wing Nuts and Thumbscrew
’66 - ’73
Wing Nuts
’66 - ’77
Finally, a good looking air cleaner for your 6-cylinder. Features a Hi-Po
air cleaner top with a performance-type replacement filter and a custom
base carefully designed to fit stock Autolite and Motorcraft carburetors.
170, 200.................. C4DZ-9600W...............ea........... 39.95
8-cylinder................. AK225..........................ea............. 1.25
Thumbscrew
’73 - ’74
Air Cleaner Adapter
200.......................... AK241..........................ea............. 2.50
Allows you to use an air cleaner with a 51⁄4" diameter
neck with a carburetor that has a 25⁄8" diameter neck.
No more fit problems when changing carburetors. Made
of high-impact, heat-resistant plastic for durability.
Air Cleaner Knob
Billet. Smooth top. Hole drilled and tapped all the way
through. Fits air cleaner assembly stud size 1⁄4 – 20.
......................MRG6407....................ea............. 4.95
.....................B358871B....................ea........... 10.95
Chrome Air Cleaners – Universal
Air Cleaner Assembly Mounting Gaskets
Goes between base of air cleaner assembly and top of carburetor.
’66 - ’74
1491
’66 - ’68 289; ’68 - ’74 302. Requires 1 per vehicle.
................................ 66248...........................pr.............. 2.95
1490
Air Cleaner Assembly –
Ford Racing
Chrome. Round, 13" diameter with Ford
Racing logo. Includes air cleaner cover,
chrome tray, Motorcraft® air filter, chrome
wing nut, PCV grommet and elbow, and
air cleaner to carburetor gasket.
1/B or 2/B
Chrome-plated top and steel base. 61⁄2" diameter. Includes filter, adapter
and hardware kit.
For vehicles with 25⁄16" or 25⁄8" diameter neck.
Low riser
High riser
2" high...................... 1491.............................ea........... 24.95
31⁄4" high.................. 1490.............................ea........... 24.95
’66 - ’77
2/V or 4/V................ M9600A302.................ea........... 69.95
ENGINE / AIR CLEANER
Air Cleaner Filter –
Universal by Spectre
ENGINE / VALVE COVERS
52
Valve Covers continued
19024
VS13264T
6A582-289
6A582-289P
6A582-302
6A582-302P
6A582-B
6A582-BP
Valve Cover Gaskets
Rubberized Cork
’66 - ’77
’66 - ’77
’66 - ’72 170; ’66 - ’77 200.
............................... 19024...........................ea........... 12.95
’66 - ’68 289; ’68 - ’77 302; ’69 - ’77 351W.
............................... 19327...........................pr............ 14.95
PermaDry Plus®
Has an edge molded design with a precise sealing bead location to make
a perfect fit. It is easy to install and requires no adhesives. Seals up to
five times longer than competitive products.
’66 - ’77
289, 302.................. VS13264T....................pr............ 39.95
C6AZ-6582PR
C6ZZ-6582AB
C3DZ-6582CH
Small-block “Powered by Ford”
’66 - ’68
’69 - ’77
’66 - ’77
“289 Powered by Ford.”
Black with brushed ribs and logo.
................................ 6A582-289...................pr.......... 149.95
Polished.................. 6A582-289P.................pr.......... 199.95
“302 Powered by Ford.”
................................ 6A582-302...................pr.......... 149.95
Polished.................. 6A582-302P.................pr.......... 199.95
“Bronco Powered by Ford.”
................................ 6A582-B.......................pr.......... 149.95
Polished.................. 6A582-BP....................pr.......... 199.95
Valve Covers
’66
’66 - ’70
289.
Painted blue, like the original.
................................ C6AZ-6582PR.............pr............ 49.95
Chrome................... C6ZZ-6582AB..............pr............ 79.95
170, 200.
Chrome................... C3DZ-6582CH.............ea........... 39.95
M6582L302
NOTE: Cannot be used on engines with electronic fuel injection or with
rocker rollers.
’66 - ’77
Chrome Aftermarket
OEM height, baffled. Plain smooth top. Hardware and gaskets not
included.
M6582B303R
Ford Racing
260, 289, 302, 351W.
............................... 9804.............................pr............ 49.95
289, 302, 351W.
Black with Ford Racing logo in red letters. See part #M6892F
in next column for grommet kit.
............................... M6582L302..................pr.......... 119.95
Chrome stamped steel with Ford Racing logo. Includes oil
cap, oil cap grommet and PCV grommet.
............................... M6582B303R...............pr............ 59.95
Chrome Engine
Dress-up Kit
“Cal Custom” Finned
Fully-polished aluminum, finned valve covers. Oil cap, oil cap grommet
and PCV grommet not included. See part #M6892F for grommet kit.
260, 289, 302, 351W.
............................... C5ZZ-6A582AF............pr............ 89.95
Includes 2 chrome valve covers,
2 valve cover gaskets, 12 chrome
wing bolts, 1 chrome push-on
breather and grommet, 2 chrome 4wire looms, 2 chrome 2-wire dividers, 12 chrome hold-down clamps
and 1 rubber grommet for PCV hole. Ideal starter kit.
NOTE: Not legal for use in California on pollution controlled vehicles.
’66 - ’77
C8OZ-6A582BL
289, 302, 351W....... 9833.............................kit............ 84.95
C8OZ-6A582C
Power by Ford
Produced from Ford factory specifications, making them absolutely perfect reproductions. Feature “Power by Ford” stamped on top.
Valve Cover Bolts – Ford Motorsport
’68 - ’72
For fast removal of valve covers. Chrome ends feature Ford oval logo.
Amount required varies with each vehicle.
302.
Ford blue.
............................... C8OZ-6A582BL...........pr............ 59.95
Chrome.
............................... C8OZ-6A582C.............pr............ 99.95
Fits all chrome V8 valve covers.
................................ M6680A302.................pr............ 10.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
53
EV68C
EV50
V158
PCV Valves
Grommet Kit
Used with valve covers that do not include grommets.
’66 - ’77
Aftermarket replacements; not genuine Ford.
V8.......................... M6892F........................kit.............. 6.95
................................ EV68C.........................ea............. 2.95
6-cylinder................. EV50............................ea............. 3.95
8-cylinder................. EV50............................ea............. 3.95
6-cylinder................. EV68C.........................ea............. 2.95
8-cylinder................. EV68C.........................ea............. 2.95
6-cylinder................. V158............................ea............. 4.95
’66 - ’67
’68 - ’69
’68 - ’72
’70 - ’75
’73 - ’77
’74
C6AZ-6A664P
Typical
Dry Element-type
Air Cleaner Assembly
Stamping on Hose
Typical Engine
Gasket Set
Engine Gasket Sets
C8AZ-6767B
C6AZ-6A664N
PCV Hoses
Molded reproductions.
’66 - ’68
’66 - ’69
289. Connects oil filler cap to air cleaner.
131⁄2" long................ C6AZ-6A664P..............ea........... 14.95
’66 - ’68 289 after 5/2/66; ’69 302 2/V. Connects PCV valve
to carburetor spacer plate.
12" long................... C6AZ-6A664N.............ea........... 12.95
A typical kit includes head, intake manifold, exhaust header gaskets;
timing cover, water outlet, oil pan, water pump, and oil pump gaskets;
exhaust crossover inserts; fuel pump mounting gasket; valve cover gaskets; rear main bearing seals; distributor mounting gasket; and crankcase vent tube gaskets.
’66 - ’74
’66 - ’77
170, 200................. 32368CS......................set........... 79.95
’66 - ’68 289; ’69 - ’77 302.
................................ FS2804........................set......... 109.95
PCV Hose Elbow
Genuine Ford.
’68 - ’73
’68 289; ’69 - ’73 302; ’71 - ’73 170, 200.
................................ C8AZ-6767B................ea........... 10.95
Engine Mount / Insulator
’66 - ’77
289, 302. LH or RH.
................................ 2329.............................ea........... 19.95
PCV Line
Add “ss” to the end of part number when ordering stainless steel.
Original
Stainless
’73 - ’77
V8...........................FTO1003..............12.95............... 19.95
Button Head Screw
Socket Head Screw
E7AZ-6A892A
’66 - ’77
’67 - ’70
’68 - ’77
’69 - ’71
Small Hex Head Screw
12-point Screw
Complete Engine Bolt / Screw Kits
C7AZ-6A892B
C8AZ-6A892
PCV Grommets
Hex Head Screw
Kits include fasteners for distributor, fuel pump, oil pan, intake, thermostat housing, timing chain housing, valve covers and water pumps.
D0OZ-6A892B
6- or 8-cylinder. Used with valve covers and oil filler caps
that have a 1" round hole.
............................... E7AZ-6A892A..............ea............. 3.95
8-cylinder with twist-in hole.
............................... C7AZ-6A892B..............ea............. 4.95
6- or 8-cylinder with oil cap that accepts elbow.
............................... C8AZ-6A892................ea............. 2.95
302 2/B.
D-shaped................. D0OZ-6A892B.............ea............. 3.95
With Cast
With Sheet Metal
Valve Covers Valve Covers
’66 - ’77
289 / 302 with passenger side water pump inlet.
Button and socket head.
............................ TS6-0886............ TS6-0081............ 42.95
Hex head............. TS6-0887............ TS6-0925............ 42.95
Socket head........ TS6-0888............ TS6-0926............ 56.95
Small hex. Grade 8.
............................ TS6-0889............ TS6-0927.......... 149.95
12-point. Grade 8.
............................ TS6-0890............ TS6-0929.......... 149.95
ENGINE / VALVE COVERS
PCV Grommets Continued
ENGINE / EXHAUST
54
Exhaust
89410
Hedman® Exhaust Headers
Includes all parts necessary to retain emission devices. Will not fit multishock absorbers, factory or aftermarket installations.
51A-18529P
51A-18529B
51A-18529A
Exhaust Tips
Stainless steel. Made in the USA.
Tube size: 11⁄2"; Collector size: 21⁄2".
Plain........................ 51A-18529P.................ea........... 16.95
V8............................ 51A-18529B.................ea........... 16.95
Ford......................... 51A-18529A.................ea........... 16.95
Painted Finish
16 gauge tubing.
’66 - ’77
289, 302.................. 89410...........................set......... 239.95
High-Temperature Coated, Polished Finish
Universal Muffler
This high-flow muffler by SpeedFX features
easy installation; tough, fully-welded case
aluminized for a long life; and a deep throaty
sound. 41⁄4" × 93⁄4", with a 13" case and overall
length of 191⁄4". 2.50" pipes. Inlet is offset and outlet is centered.
................................ FX2541........................ea........... 49.95
Features Hedman’s high-temp coating with thermal protection up to
1,300º F and a polished finish that is more durable than chrome and
won't turn blue like chrome. 16 gauge tubing.
’66 - ’77
289, 302.................. 89416...........................set......... 599.95
Hedman® Elite
Features Hedman’s high-temp coating with thermal protection up to
1,300º F. 14 gauge tubing.
’66 - ’77
289, 302.................. 89418...........................set......... 429.95
Hooker®
Competition Headers
Hooker® Competition Exhaust System
Mandrel bent (not press bent) exhaust systems are designed to fit
Hooker® Competition header back applications. Large diameter (21⁄4"
O.D.) 16-gauge steel tubing for improved efficiency (less back pressure)
and longer life. Mufflers are NOT included.
’66 - ’77
289, 302. Header back.
................................ 16567...........................ea......... 219.95
Made from 16 gauge material, which is about
30% heavier but weld easier and will last slightly longer under extreme climatic conditions.
Competition headers finished with heat-cured,
high heat-resistant black paint, or optionally with Hooker’s Metallic
Thermal Barrier Coating.
Tube size: 11⁄2" × 20", collector: 21⁄2". Hooker exhaust system #16567
will fit these headers.
’66 - ’77
289, 302. Will fit Dart / Windsor head.
Black paint............... 6909.............................pr.......... 239.95
8913
Headers
Attention California customers: California vehicle code sections
27156 and 38391 prohibit the advertising, offering for sale, or installation
of any device which modifies a vehicle’s emission control system unless
exempted. The headers in this catalog have not received an exemption
from these code sections and are not legal for sale or use in California
on vehicles originally equipped with catalytic converters. It is illegal, except for racing vehicles which may never be driven upon a highway, to
remove or otherwise render inoperative any emission control device on
regulated motor vehicles.
Locking Header Bolts
Double hex heads. 16 bolts in kit.
’66 - ’77
Small-block.
3⁄8", 16 × 3⁄4"............ 8913.............................kit............ 59.95
3⁄8", 16 × 1".............. 8913A..........................kit............ 64.95
Exhaust Manifolds
’70 - ’74
6-cylinder.
Without IMCO.......... D3BZ-9430A................ea......... 199.95
With IMCO.............. D3BZ-9430B................ea......... 139.95
Dynomax™ Standard Series Headers
Primary tube size: 15⁄8", collector size: 3".
NOTE: Modifications to your stock exhaust are required to retain the
catalytic convertor system.
’66 - ’77
302 M/T with floor shifter.
................................ 85044...........................set......... 209.95
Exhaust Manifold / Header Gasket Set
Can be used for exhaust manifold or header gaskets. Port size: 1.12" ×
1.48". Set of 2.
’69 - ’77
302.......................... 5930.............................pr............ 24.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
55
Made of graphite facing mechanically bonded to perforated metal most
suitable for sealing hot exhaust gases. Set of 2.
’66 - ’77
HEI Distributors
302.......................... D5DE-3660..................set........... 19.95
289 2/B before 12/17/65.
................................ C2OZ-9A447A.............set........... 14.95
Exhaust Manifold-toHeat Riser Stud
Mounts to RH exhaust manifold.
289, 302.................. 379763-S.....................ea............. 1.95
13049-1
133901
Exhaust Flange Gaskets
’66 - ’68
’66 - ’77
260, 289, 302.
Black cap................. D1350..........................ea......... 239.95
Blue cap.................. D1352..........................ea......... 234.95
Replacement Caps for the Above
Set of 8.
’66 - ’77
This distributor from PerTronix performs misfire-free up to 7500 RPM,
nearly 3000 RPM higher than the original factory HEI. Finally, a coil and
module engineered to work together. Limited 1-year warranty.
Exhaust Manifold Bolt Locks
’66
’66 170; ’67 - ’68 200.
................................ 13049-1........................ea............. 3.95
V8............................ 133901.........................ea............. 4.50
Engine Electrical / Wiring
Black....................... D4050..........................ea........... 29.95
Red.......................... D4051..........................ea........... 29.95
Blue......................... D4052..........................ea........... 29.95
Ignitor Electronic Ignition Systems
Upgrade to an electronic ignition and never change points again! Ignitors
are an improvement over points because their integrated circuit design
eliminates any moving parts that can wear out and delivers stable timing
which eliminates the need for adjustment. Epoxy molding make these
units impervious to dirt, oil, grease, and moisture. Fits entirely within the
distributor – no “black box” to clutter the engine compartment!
Delivers twice the voltage to the spark plugs, increasing horsepower,
fuel economy and spark plug life.
Temperature range: -50º to 300º F.
RPM range: 0 to 15,000 RPMs
Legal in all 50 states and Canada. 30-month manufacturer’s warranty
against defects.
Ignitor I®
Improvement over points in current fall time for
increased coil output. Features rotating cobalt
magnets which trigger a Hall Effect integrated
circuit. Will trigger most multi-spark CD ignitions.
Available for 6- and 12-volt negative and positive
ground systems.
Billet Distributors
This plug-and-play distributor allows you to upgrade your
outdated points or stock electronic distributor with a performance-proven distributor that features the patented Ignitor
II electronic ignition module and a CNC machined 6061 T6 polished billet housing and deck. PerTronix electronics
is also compatible with any inductive ignition system coil,
but high RPM performance can be improved when used
with a low resistance (0.6 ohm) Flame-Thrower II coil. If
you’re using a multi-spark CD ignition box, no problem;
the Flame-Thrower billet distributor is compatible. Additional features include a tempered .500" diameter shaft with low torsion displacement; an
upper roller bearing and lower self-lubricating oil-impregnated copper powder metal bushing and a durable machined heat-treated gear. Distributors
come with a factory set performance curve, a mechanical advance limiting
adjustment. Black cap.
289, 302.................. D130700......................ea......... 219.95
Replacement Cap for the Above
D1352
289, 302.................. 18020...........................pr.............. 8.95
Exhaust Manifold Bolt Set
’75 - ’77
D1350
Black.
.............................. D650700......................ea........... 29.95
Red.
.............................. D650711......................ea........... 23.95
Use with Flame-Thrower™ 40,000-volt coil for optimal performance.
’66 - ’67
’66 - ’72
’66 - ’74
’66 - ’74
6-cylinder (except V6) with single-point Holley® distributor.
Use with coil part #40501 for chrome and #40511 for black.
................................ 1266.............................ea........... 69.95
8-cylinder with dual-point distributor.
Without vacuum advance.
................................ 1281D..........................ea........... 74.95
With vacuum advance.
................................ 1281DV........................ea........... 74.95
6-cylinder (except V6) with single-point Motorcraft® distributor.
................................ 1261.............................ea........... 69.95
8-cylinder with single-point distributor.
................................ 1281.............................ea........... 74.95
** Ignitor II® is on the next page. **
Replacement Rotor for the Above
Black...................... D660701......................ea............. 9.95
ENGINE / EXHAUST / WIRING / ELECTRICAL
Exhaust Manifold Gasket Set
ENGINE / WIRING / ELECTRICAL
56
Ignitor Electronic Ignition Systems continued
Ignitor II®
Has many of the same great features of the Ignitor I,
but it’s smarter. The Ignitor II senses the coil current
levels and uses a powerful microcontroller to control
dwell period for the best possible spark over the entire RPM range, thus reducing misfires and improving
engine performance. Ignitor II systems develop up to
4 times more energy between 3,000 and 5,000 RPMs
than standard ignition systems. Peak current level is reached just prior to
spark for maximum energy without the heat buildup, increasing coil and
module life. Adjusts spark timing at higher RPMs to compensate for the
inherent electronic delay. Senses startup and develops more energy for
quicker, easier starting. Built-in reverse polarity and over-current protection shuts down the system, preventing component damage.
DG313A
Ignition Coils
’66 - ’77
’66 - ’77
Black with brown top. Replacement; does not look like original.
................................ DG313A.......................ea........... 18.95
Yellow top, looks like original.
NOTE: Not for transistorized ignitions.
................................ B6A-12019...................ea........... 34.95
Ignition Wire Set
Use with Flame-Thrower II™ 45,000-volt coil for optimal performance.
’66 - ’67
’66 - ’72
’66 - ’74
’66 - ’74
6-cylinder (except V6) with single-point Holley® distributor.
................................ 91266...........................ea........... 99.95
8-cylinder dual-point distributor.
Without vacuum advance.
................................ 91281D........................ea........... 99.95
With vacuum advance.
................................ 91281DV......................ea........... 99.95
6-cylinder (except V6) with single-point Motorcraft® distributor.
................................ 91261...........................ea........... 99.95
8-cylinder with single-point distributor.
................................ 91281...........................ea........... 99.95
This ignition wire set has the best combination of capacitance, inductance and resistance to provide more spark energy and EMI
protection. They will eliminate interference
with on-board electronics and provide better
sound quality for car audio systems
’66 - ’72
8-cylinder................. 72600...........................set........... 79.95
C7OZ-12259A
40501
40001
40011
45001
45011
Flame-Thrower Ignition Coils
Flame-Thrower I™
40,000 volts.
’66 - ’74
6-cylinder.
3.0 ohm. Use with Ignitor I® ignition systems part #s 1266
and 1261.
Chrome................... 40501...........................ea........... 39.95
Black....................... 40511...........................ea........... 34.95
8-cylinder.
1.5 ohms resistance. Oil filled. Use with Ignitor I® ignition
systems part #s 1281, 1281D and 1281DV.
Chrome................... 40001...........................ea........... 39.95
Black....................... 40011...........................ea........... 34.95
45,000 volts.
Ends
M12259C301
Exact Reproductions
Has correct numbers, letters, angled and straight boots.
’66
’67
'72 - '73
289 with smog......... C6OZ-12259B..............set........... 49.95
289.
Without smog.......... C7OZ-12259A..............set........... 39.95
With smog............... C7OZ-12259B..............set........... 39.95
6-cylinder................. D1AZ-12259B..............set........... 34.95
Ford Racing
With 45º angle boot, 9 mm diameter.
’69 - ’77
302.......................... M12259C301...............set........... 59.95
B8Q-12297A
B6A-12297A
Spark Plug Wire Separators
D7AZ-12297B
Reproductions.
Flame-Thrower II™
’66 - ’74
C7OZ12259A
Spark Plug Wires
High performance ignition coil which replaces most canister type coils in
distributor-type induction ignition systems. Maximizes energy and reliability
over the full RPM range, enables larger plug gaps for greater fuel efficiency
and more power, delivers an average of 15% more spark energy and voltage and fits existing brackets. Legal in all 50 states. 90-day warranty.
’66 - ’74
B6A-12019
0.6 ohms resistance. Use with Ignitor II ignition systems #s
91266, 91281D, 91281DV, 91261, and 91281.
Chrome................... 45001...........................ea........... 44.95
Black....................... 45011...........................ea........... 39.95
®
’66 - ’76
’66 - ’77
’75 - ’77
All. 6-cylinder requires 1; 8-cylinder requires 2.
................................ B6A-12297A................ea............. 1.50
On valve cover........ B8Q-12297A................ea............. 2.95
8-cylinder.
Mounts on valve cover with brackets. Requires 2. Holds four
9 mm spark plug wires. Constructed of durable plastic.
............................... D7AZ-12297B..............ea............. 8.95
ORDER TOLL FREE 1 - 800 - 228 - 7346
57
12997SETRD
Spark Plug Wire Separator Sets
Made from ABS plastic. The set includes 2 valve cover mounts and 2
regular separators.
Black....................... 12297SETBK...............set............. 9.95
Blue......................... 12297SETBU...............set........... 12.95
Red.......................... 12297SETRD...............set........... 12.95
45
’71 - ’74
’66 - ’74
V8 with Motorcraft® single-point distributor.
................................ 2020.............................kit............ 75.95
BR10
BRS1
46
Spark Plugs
’66 - ’74
’68 - ’72
Puts an end to replacing points
while improving performance and
fuel efficiency. This system uses
special electronic circuitry and an
infrared signal that allows ignition
timing to be stable from 1 to 10,000 RPM. The Thermal Clad-based
surface mount allows for maximum dependability and long life. Can be
installed with simple hand tools.
’66 - ’67 289; ’71 - ’74 302.
Autolite.................... 45.................................ea............. 1.29
302.
Motorcraft®.............. BF42............................ea............. 2.50
’71 - ’72 170; ’73 - ’74 200.
Autolite.................... 46.................................ea............. 1.50
Wiring Harness Kit
Kit includes wiring harness, the engine and rear sections of the harness
contains special water-proof connectors which seal each wire against oil,
gasoline and other liquids, rear section is completely finished with built-in
ground system; electric terminals, special extra-sealed Ford terminals;
fuse panel, upgraded to 11 fuses, instead of the original five (fits in the
glove box); headlamp switch; dimmer switch; ignition and wiper switches
(heavy-duty); and fuel sender wire. One year warranty.
................................ BR10............................kit.......... 449.95
Ignition Switch Adapting Kit
Made to fit the above harness. Allows you to use the factory ignition
switch
................................ BRS1...........................kit............ 29.95
7HA-12106A
DH6
Distributor Caps
’66 - ’74
’66 - ’74
B7AZ-12106A
B7A-12106A
170, 200.
With aluminum contacts.
................................ 7HA-12106A................ea............. 9.95
289, 302.
With aluminum contacts.
No logo.................... DH6..............................ea............. 6.95
Autolite logo. Show quality reproduction.
................................ B7AZ-12106A..............ea........... 29.95
With brass contacts, no logo.
................................ B7A-12106A................ea........... 12.95
DR5
DR87A
DR323
’77
This is a conversion wiring harness that is designed to work with 302
(5.0 L) and 351 (5.8 L) Electronic Fuel Injection within the Bronco engine
compartment. Ready to install and completely wrapped, the wires are
top quality and have the correct lengths and Ford connections. Includes
step-by-step instructions.
NOTE: This wiring harness is designed for ’88 - ’93 mass air 5.0 L engines but will work with ’94 - ’95 5.0 L and all 5.8 L engines using ’88 - ’93
Mustang or GT40 style intake and throttle body.
’66 - ’77
Distributor Rotors
’66 - ’77
’69 - ’77
EFI Conversion Wiring Harness
................................ C6TZ-14289EFI...........ea......... 699.95
V8 with conventional with points; ’74 - ’76 V8.
................................ DR5..............................ea............. 2.95
’69 - ’77 6-cylinder, with points; ’74 - ’76 6-cylinder with
electronic................. DR87A.........................ea............. 1.35
V8............................ DR323..........................ea............. 1.35
DY184C
Electronic Module
’76 - ’77
302.......................... DY184C.......................ea........... 19.95
Alternator Voltage Regulator Socket / Wiring
Distributor Hold-down Clamp
Replaces OEM socket. Has 6 wires.
Ford Racing. Chrome. Includes installation bolt.
85124
Except FE................ M12270A302...............ea............. 9.95
’66 - ’77
................................ 85124...........................ea............. 9.95
Points Eliminator
Kit by Accel®
58
SWC482
SW2328
SW663
Water Temperature Sending Units
’66
’66 - ’69
’70 - ’73
To serial #751,001.. SWC482......................ea........... 14.95
From serial #751,001.
................................ SW663.........................ea............. 9.95
................................ SW2328.......................ea........... 15.95
Beltronics™Performance Meter
This Vector FX1 performance computer provides performance data when
required and is great for classic or performance car. It features an LCD
back lit display, G-meter function and 6-foot power cord with standard plug.
No complicated installation, just plug in and go! The Vector FX1 gives you
feedback before and after modification on acceleration time, quarter mile
time, breaking distance, G-force and horsepower. 1-year warranty.
................................ FX1..............................ea........... 99.95
Neutral Safety Switch
’73 - ’77
................................ SW1615.......................ea........... 99.95
Wiring Terminal Kit
C2OZ-9B339A
Oil Pressure Sending Unit Extensions
’66
289.
Zinc......................... C2OZ-9B339A.............ea........... 24.95
Chrome................... C2OZ-9B339CH..........ea........... 26.95
This 175 piece kit is an assortment of the 18 most popular solderless
insulated terminals and connectors. Comes in a fancy plastic display box
with dividers................................ TK175..........................kit............ 10.95
376914S
68-562
Wiring Straps
’66 - ’77
Oil Pressure Sending Switch
’66 - ’77
8-cylinder with gauge.
................................ SW1547B.....................ea........... 14.95
Wire Loom Strap
315⁄16" × 3⁄8".
’68
C2RZ-15A700A
................................ 68-562..........................ea............... .95
HR127
MH8075
Engine Lamp Kit
This dome-shaped cover with bulb included comes with wire and is an
exact reproduction of the original Ford kit.
’66 - ’71
................................ C2RZ-15A700A...........kit............ 24.95
Horn Relay
’67 - ’77
................................ 376914S......................ea............... .50
................................ HR127..........................ea........... 19.95
MH8125
Wire Harness Wrap
Sold by the roll. Approximately 100' per roll.
3⁄4" wide
................................ MH8075.......................ea........... 14.95
1 3⁄16" wide ................................ MH8125.......................ea........... 14.95
Vinyl Electrical Tape by 3M®
Automotive super 33+. 3⁄4" × 52'. Flame retardant. Cold and weather
resistant. Suitable for use at not more than 66 V and 176º F. Premium
quality. Made in the USA.
’66 - ’77
Horn
Low tone. Excellent reproduction.
’66 - ’77
................................ C6TZ-13833A..............ea........... 34.95
................................ 3M6133........................ea............. 3.95
Auto Krafters, Inc.
is a long-time member of the
Specialty Equipment
Market Association
ORDER TOLL FREE 1 - 800 - 228 - 7346
59
Don’t overhaul or rebuild that old engine. Replace it with the best.
Now you can replace your classic Ford engine with a remanufactured stock
premium longblock engine assembly or a new high performance crate engine.
Auto Krafters is proud to offer replacement engines from Marshall Engines. For over two decades, they have built
superior quality replacement engines for cars and light trucks. They demonstrate market leadership with the
introduction of the world’s first dynamometer tested and documented production replacement engines. Customers have
racked up over four billion miles on the 200,000 engines they have shipped since 1982. They can build one just for you!
MARSHALL
LONGBLOCK
MARSHALL
BLUEPRINT®
Warranty up to
36 months or
100,000 miles,
whichever comes first.
Warranty on street engines
up to 24 months or
24,000 miles,
whichever comes first.
These engines are completely and carefully remanufactured, not just
rebuilt with new brand-name OE quality parts to achieve performance
equal to original equipment. State-of-the-art technology and dedicated
builders provide a quality standard in the engine rebuilding industry.
100% of the engine is returned to NEW specifications and tolerances.
Select from the following options:
• The Dyno-tested Longblock with a guarantee of performance on
your engine with a chart from the actual test run.
• The Premium Plus with Tin which includes the oil pan, timing cover,
oil pump, pick-up tube and screen and gasket set.
• The Premium Longblock includes adjusted valve train components,
gasket set and new oil pump.
Longblock engines feature:
• Bake cleaned heads, crankshafts and blocks.
• Heads are magnetic particle inspected and include surface decks,
new valve springs and a three angle valve job.
• New OEM pistons.
• Chemically cleaned rods 100% rebuilt to specifications, checked for
bend and twist with pin bushings replaced.
• Crankshafts are checked for bend, ground to size with oil hoses
chamfered and journals polished.
• Camshafts are replaced with new or remanufactured ones. Remanufactured ones are reground and the journals are polished.
• Blocks are magnetic particle inspected, decks cleaned and resurfaced as necessary. Bored within .004 of finished size. Finish honed
to proper size and finish to match rings. Aligned honed main bearing
bore to assure proper crankshaft clearance.
Let MARSHALL ENGINES build one for you!
When you order a Blueprint® 347 engine, you can be assured that it has
been thoroughly tested. Rotating assemblies are computer balanced to
within two grams and horsepower is dyno-tested to verify the proper
torque and all is documented and sent to you on each one.
Blueprint® engines are available to you as base or premium units. You
can get most versions of the base engine built up to the intake manifold
which includes oil pan, valve cover, and a brand new intake. You finish it
from there. Premium engines are ready for easy installation with ignition,
fuel systems, water pump and spark plugs included.
Blueprint® engines feature:
• Hand-picked, seasoned 302 blocks
• Square and parallel decked
• Align honed main bearing bore
• Cylinders plateau honed and sonic tested for thickness
• New SCAT cast or forged crankshafts and rods
• Hastings moly rings
• Balanced rotating assembly
• Melling high volume oil pump
• Heavy duty double roller timing set
• A choice of cast or aluminum heads
• Valve springs
• Hardened retainers, keepers and push rods
• Swirl polished intake and exhaust valves
Extras include:
• New Aluminum intakes
• 9.5 to one compression
• Signature series aluminum valve covers
• Brass freeze plugs
• Dyno-testing
• Shipped with documented torque and horsepower
Ask your salesperson how you can purchase one of these quality engines today!
ENGINE
ENGINE ASSEMBLIES FROM MILD TO WILD

Part I - Auto Krafters

Transcription

Similar documents

Johnny Tremain by Esther Forbes Objectives

Activity Kit - Draw Flynn`s Nose The Magistrate just can`t get Flynn`s

Gravlax Kit Guide and Information

LGOBO SALE SHEET

The wardrobe malfunction — it`s a Hollywood moment that

Amal Concentric Tuning Booklet

HANOMAG SdKfz 251 D

DMC1229 WIRING SYSTEM SERVICE KIT For the Kaman K-Max

Hanging file system kits. File Frame.

Improving the Weighing Process of Young Swine