Read - Microdia

Transcription

Read - Microdia
°microdia
NEWSLETTER NO 5 1
Future proof
2016
Long life span, upgradable, modulable, life time support and spares availability…..
Founded on June 14th 1979 microdia is one the oldest cross head and extrusion tooling manufacturer
in the world.
Starting as a modest extrusion tool manufacturer, the company has been constantly growing, creating
successive cross heads families: mf, 9000, avantis, eomex etc. under the guidance of Mr Patrick Zacchia
CEO of the company since its creation.
The proximity of advanced swiss cables manufacturers stimulated the development of complex extrusion heads and tooling making of microdia a leader in the field.
microdia product range 1985
microdia booth (partial view) wire 2014 Düsseldorf germany
°microdia
Your expert in extrusion needs
SWISS MADE
www.microdia.ch
°microdia
NEWSLETTER NO 5 1
2016
MICRODIA’S CROSS HEAD FAMILIES:
COHERENT THROUGHOUT MORE THAN THREE DECADES
The eighties: mf-10 & mf-20
mf-10 & mf-20 fixed center, single or single layer + skin/stripe, the first
microdia’s cross head created to extrude solid , foam skin telephone
wire and building wire made a successful on the market. Hundreds
of mf heads were sold all over the world.
microdia mf-10 SFS
The nineties: mf 9000
single layer + skin/stripe
and integrated by-pass
In response to the market demand, asking for a cross head easier to
handle with shorter tooling change time and higher precision microdia engineers designed the first mf 9000-10, immediately followed
by larger models covering an overall diameter range of 0.1 mm to
160 mm.
mf 9000 series now includes fixed & manual centering heads, double, triple layers; double, triple layers + stripe; cross flow quick color
change and many more...
mf 9000- 10 SFS
single layer +
skin/stripe
The 21st century: avantis
To cope with the challenges posed by the new technological compounds, it was necessary to have an even more versatile cross head
design whilst remaining fully compatible with the earlier cross head
type in terms of adaptability and tooling; avantis was the response.
Strongly built according to microdia tradition, avantis cross heads allow heavily loaded compounds and high viscosity polymers to be
efficiently extruded at reduced pressure and higher speed.
avantis-20 SLS
one of microdia
best seller
ecomex the green:
Derived from the avantis concept, ecomex has been engineered with
the aim of improving biopolymers extrusion conditions. Although it
looks like an avantis, the head block has been redesigned in order to
reduce drag and friction heating during compound transit through
the cross head, allowing higher speed without product alteration.
Ecomex-10 SLS
°microdia
Your expert in extrusion needs
SWISS MADE
www.microdia.ch
°microdia
NEWSLETTER NO 5 1
2015
Future proof…..
 No programmed obsolescence. It is natural for all materials to deteriorate. Future-proof products
are built to last under normal operating condition. Whenever possible wear part can easily be replaced.
 Flexibility and adaptability. Future-proof products should not just allow flexibility and adaptability,
but also stimulate it. Adaptability to the environment, uses and future technologies is critical to a
long life span.
 Extend service life. Future-proof products should contribute to make the machinery usable for the
long-term future
Modulable….no limit !
Modules like adapter, elbow, by-passe can be added any time to any microdia cross head in order to
adapt it to the desired extrusion line configuration.
Our engineers have a wealth of experience and there no limit
in their imagination to satisfy every customer’s particular need.
Life time spare parts supply.
Construction documents as well as quality control report of each microdia cross head is archived
in our facilities and every single part reference is laser engraved making easy spare part further
ordering.
Existence of a large stock of spare parts makes it possible short delivery of standard wear parts;
manufacturing of parts sold long ago is always possible.
With microdia you are in good hands.
°microdia
Your expert in extrusion needs
SWISS MADE
www.microdia.ch
°microdia
NEWSLETTER NO 5 1
2015
2016 exhibitions
Medical tubes
MD&M West 2016
February 9. to 11. 2016
Anaheim Convention Center.
Anaheim, California
USA
MD&M West is THE annual event that
every Medical Device Manufacturer
should attend. It is where the "best-ofthe-best" in medical device suppliers
showcase their capabilities, capacities
and innovation.
Booth 673
Medtec 2015 Shanghai
Wire & cables
‘’The Show’’
Hall 11
Booth D27
Wire 2014 Düsseldorf
Wire 2016 Düsseldorf Germany
April 4. to 8. 2016
Wire and cable
Wire China 2016 - The 7th All
China International Wire &
Cable Industry Trade Fair.
Shanghai P.R. China
September 26. to 29. 2016
°microdia
Wire China, co-organized and
developed jointly by Messe
Düsseldorf and its subsidiary in
China together with Shanghai
Electric Cable Research Institute, has now become the leading trade fair of its kind in Asia.
Your expert in extrusion needs
Wire China Shanghai 2014
SWISS MADE
www.microdia.ch
°microdia
USA
Switzerland
microdia
Swiss
Head Office & works:
Prés du Lac 69bis
1400 Yverdon les Bains
Switzerland
Tel: +41 24 447 3500
Fax: +41 24 445 1228
[email protected]
www.microdia.ch
microdia
P.R China 上海
Alban Adams Director
P.O.Box 1419
Pawcatuck CT 06379
1-860-495-5788 (office)
1-401-688-6731 (mobile)
[email protected]
skype: alban.adams
Germany
Room A201, Building 3, No. 526,
3rd East Fute Road
Pilot Free Trade Zone
China
200131 Shanghai, China
中国(上海)自由贸易区富特东三
路526号3号楼A201室,
邮编: 200131
陈曙欣 +86-13917923939
[email protected]
祖照亮 +86-18616387577
[email protected]
Japan
Germany
Philippe Chasseloup
Sales Manager
Deutschland & Austria
Tel.: +49 171 8654289
Fax: +41 24 445 12 28
[email protected]
Skype: microdia deutschland
microdia
microdia Asia Pacific
USA
Roger King
Sales Engineer
Tube division
13533 Camino Carmel
Del Mar CA 92014
1-858-792 6962 (office)
1-858-442 4587 (mobile)
[email protected]
skype: roger.king170
For USA & Germany
Contact in Switzerland:
Stephanie Chasseloup
Sales assistant
Microdia Head Office
+ 41 24 447 3510
[email protected]
microdia
Page 5
Newsletter No 51
T.Fukase & Co., Ltd.
Sole agent of microdia in Japan
2-10-10 Makuhari Hongo
Hanamigawa-Ku,
Chiba, Japan 262-0033
Tel: +81-43-276-0630
Fax: +81-43-276-0463
[email protected]
http://www.fukase.co.jp
Hall 11 booth D-27
04--08.04.2016.
Düsseldorf Germany
°microdia
Your expert in extrusion needs
SWISS MADE
www.microdia.ch