Microsoft Word 1A: Business Letters: Format, Format of a Business Letter:

Transcription

Microsoft Word 1A: Business Letters: Format, Format of a Business Letter:
Microsoft Word 1A: Business Letters: Format,
Text Wrap, Insert Text Box, Logo
Format of a Business Letter:

Although there are different formats to use when preparing a business letter, you should always use an
approved format specified in a keyboarding textbook or other template.


Open
(sampleletter1) and examine the spacing and placement of the parts of a letter.
Alternatively you may use templates provided in the word processing software.
Note: it can sometimes be tricky working with these Microsoft template files, and it is often easier to make
your own files and save copies to be used again and again by replacing certain components, (thus creating your
own templates).
Working with Images:

You can insert clipart or photos in word processing documents.
1

This is particularly useful for placing a logo on a business letter instead of buying pre-printed
letterhead stationary.


A logo used to represent a business (e.g. the golden arches for McDonald's).
Logos are inserted at the top of a letter the letterhead and may have the following information so that it
does not need to be keyed every time a new letter is created: address, phone, fax, e-mail, and possibly a slogan.
figure 1.1.1 (Sample Logo)

When you insert any image in Word you will have difficulty moving around the graphic unless you
right-mouse click the image, and select Text Wrapping and Tight as shown.

A text box can be inserted over the image in Word, allowing you to add the address, and possibly a phone
number, e-mail address, etc. as required within the Word.
Additional Parts of a Business Letter:
2
Sometimes you need to send a letter by certified mail.
This means that the post office will require a person to sign for the letter when it is delivered.
This cost extra, but you can be sure that the person has received the letter by going to the post office
and having them look up if a signature was received.
Sometimes you attach something with a letter (eg. an unpaid bill).
In your letter you should describe that there is a copy of the bill enclosed.
If you are sending a copy of the letter to someone else (eg. a letter is sent to a person, and a copy to their boss) then
this must be indicated in the bottom portion of the letter that you will see in
CERTIFIED MAIL, and Enclosure components.
Step by Step Instructions
3
(sampleletter2) as well as the
When you open Word, you see two things, or main parts:
The ribbon, which sits above the document, and includes a set of buttons and commands that
you use to do things in and with your document (like print it). You’ll hear more about the ribbon
later, and you’ll get to use it in the practice at the end of the lesson.
A blank document, which looks like a white sheet of paper and takes up most of the window.
4
In the document, look for the cursor, a blinking vertical line in the upper-left corner of the page,
which tells you where the content you type will appear on the page. Word waits for you to start
typing.
If you'd like to start typing further down the page instead of at the very top, press the ENTER
key on your keyboard until the cursor is where you want to type.
When you start typing, the text you type pushes the cursor to the right. If you get to the end of a
line, just continue to type. The text and the insertion point will move on to the next line for you.
Once you’ve finished typing your first paragraph, you press the ENTER key to go to the next
paragraph. If you want more space between the two paragraphs (or any two paragraphs), press
ENTER again and then start typing your second paragraph.
If you make a mistake while typing, just press the BACKSPACE key to “erase” the incorrect
characters or words.
5
As you type, Word will warn you if make spelling or grammar mistakes by inserting a wavy red,
green, or blue underline beneath the text that it thinks is an error, as follows:
Red underline This indicates either a possible spelling error or that Word doesn't recognize a
word, such as a proper name or place.
Green underline
Word thinks that grammar should be revised.
Blue underline A word is spelled correctly but does not seem to be the correct word for the
sentence. For example, you type "too," but the word should be "to."
What do you do about the underlines? You right-click an underlined word to see suggested
revisions (every once in a while Word may not have any alternate spellings). Click a revision to
replace the word in the document and get rid of the underlines. Note that if you print a document
with these underlines, they will not show up on printed pages.
A note of caution about green and blue underlines: Word is really good at spelling, which is
pretty straightforward, most of the time. But grammar and correct word usage take some
judgment. If you think that you are right, and Word is wrong, you can ignore the suggested
revisions and get rid of the underlines. You'll see how in the practice.
6
Tip If you prefer not to stop every time you see wavy underlines, you can just ignore them as
you go. When you are through, you can tell Word to check spelling and grammar all at one time.
You'll learn how in the practice.
The press release you’re typing announces the net income and price per share for Contoso
Pharmaceuticals. You can call attention to this important information by adding emphasis with
bold, italic, or underlined formatting.
Let’s make the text bold. Now, remember the ribbon we mentioned at the beginning of the
lesson? Now’s when you’ll see how it’s used.
As you can see in the picture, there are several tabs across the top. Each represents an activity
area. The second tab, the Home tab, should be selected (if not, you click it to select it).
Each tab has several groups of commands that show related items together. On the Home tab,
look for the Font group. In that group you’ll see several buttons and commands that perform a
specific action on your document. For example the Bold button
makes the text becomes
bold. You can also change the font color and size of text with the Font Color button
and
Font Size button
.
7
Don’t worry about doing any of this right now, you’ll get a chance to try this in the practice
session at the end of the lesson.
You can make most changes to text from the Font group, but formatting text this way is handy
when you want to change the format of just a few characters or words. However, there’s a way to
make all the changes we just did with just one command, by using styles.
The styles are on the Home tab, in the Styles group. You just choose the style you want, and the
text size, font, attributes, and paragraph formatting are changed for you automatically.
You’ll also use Quick Styles in the practice, to add formatting to the title, heading and
subheading of the press release and achieve the results you see in the picture.
Need to make a list? That’s also something you do from the Home tab, in the Paragraph
group (right next to the Font group). You’ll also do that in the practice.
8
Page margins are the blank spaces around the edges of the page. There is a 1-inch (2.54 cm) page
margin at the top, bottom, left, and right sides of the page. This is the most common margin
width, which you might use for most of your documents.
But if you want different margins, you should know how to change them, which you can at any
time. When you type a very brief letter, for example, or a recipe, an invitation, or a poem, you
might like different margins.
You also use the ribbon to change margins, except you work from the Page Layout tab. First
you click it to select it, and then, in the Page Setup group, you click Margins. You'll see
different margin sizes, shown in little pictures (icons), along with the measurements for each of
the margins.
The first margin in the list is Normal, the current margin. To get narrower margins, you would
click Narrow. If you want the left and right margins to be much wider, click Wide. When you
click the margin type that you want, your entire document automatically changes to the margin
type you selected.
9
When you choose a margin, the icon for the margin you chose gets a different color background.
If you click the Margins button again, that background color tells you which margin size has
been set for your document.
At some point you may have a finely tuned sentence or several paragraphs of ideas, facts, or
figures that you would regret losing if your cat jumped on your keyboard, or if a power failure
shut your computer off.
To keep your work, you have to save it, and it's never too early to do that.
On the ribbon, you click the first tab, the File tab.
This opens a large window called the Backstage, a place where you take care of a lot of things,
such as saving your document, and printing it.
In the left column, you click Save. A smaller window, called a dialog box, opens. You use this
box to tell Word where you want to store the document on your computer, and what you want to
call it. You'll learn the exact steps in the practice.
10
After you save your document, and you continue to type, you should save your work as you go.
Need to print?
When you’re ready to print, click again the File tab (the first tab). In the left column, you click
the Print command. A large window opens, and you click the Print button. Of course, you’ll
need to have a printer hooked up to your computer.
Close the document
When you are through with the document and have saved your work, close the file. Click the
File tab, and in the left column click Close.
Tip To find your document after you close it, look in the Recent Documents list shown in the
picture. Click a document in the list to open it. You'll learn more about how to find and open a
document in the practice.
11