Govmark APPAREL & APPAREL FABRICS (CHILDREN’S SLEEPWEAR)

Govmark
Fire & Flammability Testing
TEST ORDER FORM
APPAREL & APPAREL FABRICS (CHILDREN’S SLEEPWEAR)
DISCUSSION ON LAUNDERING
The law requires all fabrics to be tested both initially and after 50 launderings. Products whose flame
retardant characteristics depend on topical finishes should undergo the 50 wash procedure on every
production lot.
Garment manufacturers are relieved of the 50 wash responsibility provided that they have a 50 wash test
certificate applying to the fabric used to construct the garment.
There are certain instances where due to the garment finish and construction, the garment is unable to
comply with the test requirements. Occasionally, one wash and dry will sometimes improve the garment’s
performance. The law permits this one laundering cycle.
Please complete a separate form for each product submitted.
TEST REQUESTED: Children’s Sleepwear:
PRODUCT TO BE TESTED:
☐ 16 CFR 1615 (sizes 0-6X); ☐ 16 CFR 1616 (sizes 7-14)
☐ Fabric
☐ Initial (as received)
☐ After 50 launderings
☐ Prototype Seam
☐ Prototype Trim
DO YOU REQUIRE YOUR SAMPLES TO BE RETURNED TO YOU:
☐ Garment
☐ Initial (as received)
☐ After 1 laundering
☐ After 50 launderings
☐ NO; ☐ YES
CARRIER:
ACCOUNT #:
LITIGATION: We need to know if the test is part of a lawsuit.
IS THIS TESTING PART OF A CLAIM ON BEHALF OF A PLAINTIFF OR DEFENDANT:
☐ NO; ☐ YES
See “Test Order Form” Pages 2 – 3 for “Product Descriptions”
-- Continued on Page 2 --
Govmark
96 Allen Boulevard, Suite D • Farmingdale, NY 11735-5626 • U.S.A.
Tel. +1 631 293 8944 • Fax +1 631 293 8956
E-mail: [email protected] Website: www.govmark.com
Page 1 of 5
Govmark
Fire & Flammability Testing
TEST ORDER FORM
APPAREL & APPAREL FABRICS (CHILDREN’S SLEEPWEAR)
FABRIC TEST:
DESCRIPTION OF SAMPLE BEING SUBMITTED: Please describe product as completely as possible.
As a minimum, the below listed categories should be filled in.
1. Fabric Fiber Content:
☐oz/yd²; ☐ oz/ly
2. Fabric Weight:
3. Width (inches):
4. Count:
5. Fabric Color/Pattern:
6. Finish:
7. Fabric Style:
(e.g.: Jersey, tricot, flannel, quilt, etc.)
8. Number of yards in production lot:
(Maximum 5,000 yards)
Note: Government regulations require that you retain in your files a ½ yard sample adjacent to the piece that you
submit for testing.
GARMENT TEST:
DESCRIPTION OF SAMPLE BEING SUBMITTED: Please describe product as completely as possible.
As a minimum, the below listed categories should be filled in.
Garment Style #:
GPU #:
Number of dozens in production lot:
(Maximum 500 dozen)
GARMENT COMPONENTS:
Base Fabric Identification:
1. Fabric Supplier:
2. Fabric Fiber Content:
3. Fabric Color/Pattern:
4. Fabric Style Name/Number:
Longest Seam Identification:
1. Seam Type:
2. Thread Supplier:
3. Thread Fiber Content:
4. Thread Style:
5. Number of Stitches/Inch:
NOTE: Government regulations require that you retain in your files one garment of each style that you make.
-- Continued on Page 3 -Govmark
96 Allen Boulevard, Suite D • Farmingdale, NY 11735-5626 • U.S.A.
Tel. +1 631 293 8944 • Fax +1 631 293 8956
E-mail: [email protected] Website: www.govmark.com
Page 2 of 5
Govmark
Fire & Flammability Testing
TEST ORDER FORM
APPAREL & APPAREL FABRICS (CHILDREN’S SLEEPWEAR)
PROTOTYPE SEAM TEST:
DESCRIPTION OF SAMPLE BEING SUBMITTED: Please describe product as completely as possible.
As a minimum, the below listed categories should be filled in.
Base Fabric Identification:
1. Fabric Supplier:
2. Fabric Fiber Content:
3. Fabric Color/Pattern:
4. Fabric Weight oz/yd²:
5. Fabric Style Name/Number:
Seam Identification:
1. Thread Supplier:
2. Thread Fiber Content:
3. Thread Style:
4. Seam Type:
5. Number of Stitches/Inch:
NOTE: Government regulations require that you retain in your files 15 specimens which are exact duplicates of those
you submit for testing.
PROTOTYPE TRIM TEST:
DESCRIPTION OF SAMPLE BEING SUBMITTED: Please describe product as completely as possible.
As a minimum, the below listed categories should be filled in.
Base Fabric Identification:
1. Fabric Supplier:
2. Fabric Fiber Content:
3. Fabric Color/Pattern:
4. Fabric Style Name/Number:
Trim Identification:
1. Trim Supplier:
2. Trim Type:
3. Attachment:
NOTE: Government regulations require that you retain in your files 15 specimens which are exact duplicates of those
you submit for testing.
-- Continued on Page 4 -Govmark
96 Allen Boulevard, Suite D • Farmingdale, NY 11735-5626 • U.S.A.
Tel. +1 631 293 8944 • Fax +1 631 293 8956
E-mail: [email protected] Website: www.govmark.com
Page 3 of 5
Govmark
Fire & Flammability Testing
TEST ORDER FORM
APPAREL & APPAREL FABRICS (CHILDREN’S SLEEPWEAR)
SPECIAL INSTRUCTIONS: All special instructions contained in your purchase order, such as testing
modifications, extra report copies, invoice distribution, etc., must be repeated on this test order form.
Testing will be conducted as directed by this test order form which supersedes the purchase order.
COMPANY DATA: Please complete all three columns. Where appropriate, “same” may be entered in
Columns 2 and 3.
Unless otherwise instructed, all reports will be sent to the company identified in Column 1.
(1)
COMPANY SUBMITTING
SAMPLE
(2)
COMPANY TO APPEAR ON
REPORT
(3)
COMPANY BILLING
ADDRESS
Person’s Name:
Company Name:
Address:
Telephone #:
E-mail:
-- Continued on Page 5 --
Govmark
96 Allen Boulevard, Suite D • Farmingdale, NY 11735-5626 • U.S.A.
Tel. +1 631 293 8944 • Fax +1 631 293 8956
E-mail: [email protected] Website: www.govmark.com
Page 4 of 5
Govmark
Fire & Flammability Testing
TEST ORDER FORM
APPAREL & APPAREL FABRICS (CHILDREN’S SLEEPWEAR)
SAMPLE SUBMITTAL CHECK LIST
a)
☐ Face: Write the word ‘FACE” on the surface of the material to be exposed to the test
conditions. (Writing on the material is preferable to labeling; labels can fall off.)
b)
☐ Length Direction: Draw an arrow on the face surface in the length/warp/machine direction of
the material.
c)
☐ Maximum Exposure/Cycles: If a sample is being subjected to a potentially destructive
exposure, such as light, abrasion, etc., please specify the maximum number of cycles (i.e. 60
hours; 100,000 double rubs; etc.). Requests to test “until break” are not satisfactory; the
maximum number of cycles must be specified by the submitter.
d)
☐ Color: Color must be given when color sensitive tests are requested. If the color is given by
number code, please also furnish a word description of the color (i.e. Color 157 Chocolate;
Color 281 Sage).
e)
☐ Adhesive: In the absence of instructions from the client, adhesive products will be applied to
standard substrate material.
SEND SAMPLES TO:
THE GOVMARK ORGANIZATION, INC.
96 ALLEN BOULEVARD, SUITE D
FARMINGDALE, NY 11735-5626 U.S.A.
Federal EIN # 11 2237670
Tel. +1 631-293-8944
Fax +1 631-293-8956
E-mail: [email protected]
SAMPLES THAT ARE RECEIVED WITHOUTAPPROPRIATE INFORMATION MAY BE DELAYED IN
TESTING PENDING RECEIPT OF SUCH INFORMATION.
NAME OF PERSON COMPLETING FORM:
DATE:
Govmark
96 Allen Boulevard, Suite D • Farmingdale, NY 11735-5626 • U.S.A.
Tel. +1 631 293 8944 • Fax +1 631 293 8956
E-mail: [email protected] Website: www.govmark.com
Page 5 of 5